← Commit history

Initial commit: component/stm32f446rct6

Ray ·313fb4d4f0 ·
2 files changed +591
README.mdadded+100
@@ -0,0 +1,100 @@+# STM32F446RCT6++**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · LQFP-64(10x10)++STM32F446RCT6 from STMicroelectronics, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VBAT | power_in | Battery supply pin (1.7 to 3.6 V) for RTC, backup SRAM, backup registers, and low-power modes. |+| 2 | PC13 | bidirectional | GPIO port C bit 13, 5 V tolerant I/O with reset as floating input; supports RTC tamper input and wakeup. |+| 3 | PC14-OSC32_IN | bidirectional | GPIO port C bit 14 (function after reset: 32 kHz oscillator input); 5 V tolerant I/O. |+| 4 | PC15-OSC32_OUT | bidirectional | GPIO port C bit 15 (function after reset: 32 kHz oscillator output); 5 V tolerant I/O. |+| 5 | PH0-OSC_IN | bidirectional | GPIO port H bit 0 (function after reset: external oscillator input, 4-26 MHz); 5 V tolerant I/O. |+| 6 | PH1-OSC_OUT | bidirectional | GPIO port H bit 1 (function after reset: external oscillator output); 5 V tolerant I/O. |+| 7 | NRST | bidirectional | Bidirectional reset pin with weak pull-up resistor; accepts active-low reset signals and open-drain output. |+| 8 | PC0 | bidirectional | GPIO port C bit 0, 5 V tolerant I/O with reset as floating input; supports SAI1_MCLK_B, OTG_HS_ULPI_STP, FMC_SDNWE, ADC123_IN10. |+| 9 | PC1 | bidirectional | GPIO port C bit 1, 5 V tolerant I/O with reset as floating input; supports SPI/I2S/SAI functions and ADC123_IN11. |+| 10 | PC2 | bidirectional | GPIO port C bit 2, 5 V tolerant I/O with reset as floating input; supports SPI2_MISO, OTG_HS_ULPI_DIR, FMC_SDNE0, ADC123_IN12. |+| 11 | PC3 | bidirectional | GPIO port C bit 3, 5 V tolerant I/O with reset as floating input; supports SPI/I2S functions, OTG_HS_ULPI_NXT, FMC_SDCKE0, ADC123_IN13. |+| 12 | VSSA | power_in | Analog ground supply pin (0 V reference) for ADC, DAC, and PLL circuits. |+| 13 | VDDA | power_in | Analog power supply pin (1.8 to 3.6 V) for analog blocks including ADC, DAC, comparators, and operational amplifiers. |+| 14 | PA0-WKUP | bidirectional | GPIO port A bit 0 (function after reset: wakeup pin), 5 V tolerant I/O; supports TIM2/TIM5/TIM8, USART2, UART4, ADC123_IN0, wakeup/tamper. |+| 15 | PA1 | bidirectional | GPIO port A bit 1, 5 V tolerant I/O with reset as floating input; supports TIM2/TIM5, USART2/UART4, QUADSPI, SAI2, ADC123_IN1. |+| 16 | PA2 | bidirectional | GPIO port A bit 2, 5 V tolerant I/O with reset as floating input; supports TIM2/TIM5/TIM9, USART2, SAI2, ADC123_IN2. |+| 17 | PA3 | bidirectional | GPIO port A bit 3, 5 V tolerant I/O with reset as floating input; supports TIM2/TIM5/TIM9, SAI1, USART2, OTG_HS_ULPI_D0, ADC123_IN3. |+| 18 | VSS | power_in | Digital ground supply pin (0 V reference). |+| 19 | VDD | power_in | Digital power supply pin (1.7 to 3.6 V) for core logic. |+| 20 | PA4 | bidirectional | GPIO port A bit 4, 3.3 V tolerant I/O directly connected to ADC with reset as floating input; supports SPI/I2S/SAI, USART2, OTG_HS_SOF, DCMI_HSYNC, ADC12_IN4, DAC_OUT1. |+| 21 | PA5 | bidirectional | GPIO port A bit 5, 3.3 V tolerant I/O directly connected to ADC with reset as floating input; supports TIM2/TIM8, SPI1, OTG_HS_ULPI_CK, ADC12_IN5, DAC_OUT2. |+| 22 | PA6 | bidirectional | GPIO port A bit 6, 5 V tolerant I/O with reset as floating input; supports TIM1/TIM3/TIM8/TIM13, SPI1, I2S2_MCK, DCMI_PIXCLK, ADC12_IN6. |+| 23 | PA7 | bidirectional | GPIO port A bit 7, 5 V tolerant I/O with reset as floating input; supports TIM1/TIM3/TIM8/TIM14, SPI1/I2S1, FMC_SDNWE, ADC12_IN7. |+| 24 | PC4 | bidirectional | GPIO port C bit 4, 5 V tolerant I/O with reset as floating input; supports I2S1_MCK, SPDIFRX_IN2, FMC_SDNE0, ADC12_IN14. |+| 25 | PC5 | bidirectional | GPIO port C bit 5, 5 V tolerant I/O with reset as floating input; supports USART3_RX, SPDIFRX_IN3, FMC_SDCKE0, ADC12_IN15. |+| 26 | PB0 | bidirectional | GPIO port B bit 0, 5 V tolerant I/O with reset as floating input; supports TIM1/TIM3/TIM8, SPI3/I2S3, UART4, OTG_HS_ULPI_D1, SDIO_D1, ADC12_IN8. |+| 27 | PB1 | bidirectional | GPIO port B bit 1, 5 V tolerant I/O with reset as floating input; supports TIM1/TIM3/TIM8, OTG_HS_ULPI_D2, SDIO_D2, ADC12_IN9. |+| 28 | PB2-BOOT1 | bidirectional | GPIO port B bit 2 (function after reset: BOOT1 pin), 5 V tolerant I/O; supports TIM2, SAI1, SPI3/I2S3, QUADSPI_CLK, OTG_HS_ULPI_D4, SDIO_CK. |+| 29 | PB10 | bidirectional | GPIO port B bit 10, 5 V tolerant I/O with reset as floating input; supports TIM2, I2C2, SPI2/I2S2, SAI1, USART3, OTG_HS_ULPI_D3. |+| 30 | VCAP_1 | passive | Decoupling capacitor connection point for internal voltage regulator; requires 1 µF to 10 µF ceramic capacitor. |+| 31 | VSS | power_in | Digital ground supply pin (0 V reference). |+| 32 | VDD | power_in | Digital power supply pin (1.7 to 3.6 V) for core logic. |+| 33 | PB12 | bidirectional | GPIO port B bit 12, 5 V tolerant I/O with reset as floating input; supports TIM1, I2C2, SPI2/I2S2, SAI1, USART3, CAN2, OTG_HS_ULPI_D5, OTG_HS_ID. |+| 34 | PB13 | bidirectional | GPIO port B bit 13, 5 V tolerant I/O with reset as floating input; supports TIM1, SPI2/I2S2, USART3, CAN2, OTG_HS_ULPI_D6, OTG_HS_VBUS. |+| 35 | PB14 | bidirectional | GPIO port B bit 14, 5 V tolerant I/O supplied by VDDUSB with reset as floating input; supports TIM1/TIM8, SPI2, USART3, TIM12, OTG_HS_DM. |+| 36 | PB15 | bidirectional | GPIO port B bit 15, 5 V tolerant I/O supplied by VDDUSB with reset as floating input; supports RTC_REFIN, TIM1/TIM8, SPI2/I2S2, TIM12, OTG_HS_DP. |+| 37 | PC6 | bidirectional | GPIO port C bit 6, I2C fast-mode+ compatible 5 V tolerant I/O with reset as floating input; supports TIM3/TIM8, FMPI2C1, I2S2, USART6, SDIO_D6, DCMI_D0. |+| 38 | PC7 | bidirectional | GPIO port C bit 7, I2C fast-mode+ compatible 5 V tolerant I/O with reset as floating input; supports TIM3/TIM8, FMPI2C1, SPI2/I2S2/I2S3, SPDIFRX, USART6, SDIO_D7, DCMI_D1. |+| 39 | PC8 | bidirectional | GPIO port C bit 8, 5 V tolerant I/O with reset as floating input; supports TRACED0, TIM3/TIM8, UART5, USART6, SDIO_D0, DCMI_D2. |+| 40 | PC9 | bidirectional | GPIO port C bit 9, 5 V tolerant I/O with reset as floating input; supports MCO2, TIM3/TIM8, I2C3, I2S_CKIN, UART5, QUADSPI, SDIO_D1, DCMI_D3. |+| 41 | PA8 | bidirectional | GPIO port A bit 8, 5 V tolerant I/O with reset as floating input; supports MCO1, TIM1, I2C3, USART1, OTG_FS_SOF. |+| 42 | PA9 | bidirectional | GPIO port A bit 9, 5 V tolerant I/O with reset as floating input; supports TIM1, I2C3, SPI2/I2S2, SAI1, USART1, DCMI_D0, OTG_FS_VBUS. |+| 43 | PA10 | bidirectional | GPIO port A bit 10, 5 V tolerant I/O with reset as floating input; supports TIM1, USART1, OTG_FS_ID, DCMI_D1. |+| 44 | PA11 | bidirectional | GPIO port A bit 11, 5 V tolerant I/O supplied by VDDUSB with reset as floating input; supports TIM1, USART1, CAN1, OTG_FS_DM. |+| 45 | PA12 | bidirectional | GPIO port A bit 12, 5 V tolerant I/O supplied by VDDUSB with reset as floating input; supports TIM1, USART1, SAI2, CAN1, OTG_FS_DP. |+| 46 | PA13 | bidirectional | GPIO port A bit 13 (function after reset: JTMS-SWDIO), 5 V tolerant I/O; debug interface pin for JTAG/SWD. |+| 47 | VSS | power_in | Digital ground supply pin (0 V reference). |+| 48 | VDD | power_in | Digital power supply pin (1.7 to 3.6 V) for core logic. |+| 49 | PA14 | bidirectional | GPIO port A bit 14 (function after reset: JTCK-SWCLK), 5 V tolerant I/O; debug interface clock pin for JTAG/SWD. |+| 50 | PA15 | bidirectional | GPIO port A bit 15 (function after reset: JTDI), 5 V tolerant I/O; supports JTDI, TIM2, HDMI_CEC, SPI1/SPI3, I2S1/I2S3, UART4. |+| 51 | PC10 | bidirectional | GPIO port C bit 10, 5 V tolerant I/O with reset as floating input; supports SPI3/I2S3, USART3, UART4, QUADSPI, SDIO_D2, DCMI_D8. |+| 52 | PC11 | bidirectional | GPIO port C bit 11, 5 V tolerant I/O with reset as floating input; supports SPI3, USART3, UART4, QUADSPI, SDIO_D3, DCMI_D4. |+| 53 | PC12 | bidirectional | GPIO port C bit 12, 5 V tolerant I/O with reset as floating input; supports I2C2, SPI3/I2S3, USART3, UART5, SDIO_CK, DCMI_D9. |+| 54 | PD2 | bidirectional | GPIO port D bit 2, 5 V tolerant I/O with reset as floating input; supports TIM3, UART5, SDIO_CMD, DCMI_D11. |+| 55 | PB3 | bidirectional | GPIO port B bit 3 (function after reset: JTDO/TRACESWO), 5 V tolerant I/O; supports JTDO/TRACESWO, TIM2, I2C2, SPI1/SPI3, I2S1/I2S3. |+| 56 | PB4 | bidirectional | GPIO port B bit 4 (function after reset: NJTRST), 5 V tolerant I/O; supports NJTRST, TIM3, I2C3, SPI1/SPI3, I2S1/I2S3, SPI2/I2S2. |+| 57 | PB5 | bidirectional | GPIO port B bit 5, 5 V tolerant I/O with reset as floating input; supports TIM3, I2C1, SPI1/SPI3, I2S1/I2S3, CAN2, OTG_HS_ULPI_D7, FMC_SDCKE1, DCMI_D10. |+| 58 | PB6 | bidirectional | GPIO port B bit 6, 5 V tolerant I/O with reset as floating input; supports TIM4, HDMI_CEC, I2C1, USART1, CAN2, QUADSPI, FMC_SDNE1, DCMI_D5. |+| 59 | PB7 | bidirectional | GPIO port B bit 7, 5 V tolerant I/O with reset as floating input; supports TIM4, I2C1, USART1, SPDIFRX, FMC_NL, DCMI_VSYNC. |+| 60 | BOOT0 | input | Dedicated BOOT0 input pin (VPP in programming mode); determines boot source selection (Flash, system memory, or SRAM). |+| 61 | PB8 | bidirectional | GPIO port B bit 8, 5 V tolerant I/O with reset as floating input; supports TIM2/TIM4/TIM10, I2C1, CAN1, SDIO_D4, DCMI_D6. |+| 62 | PB9 | bidirectional | GPIO port B bit 9, 5 V tolerant I/O with reset as floating input; supports TIM2/TIM4/TIM11, I2C1, SPI2/I2S2, SAI1, CAN1, SDIO_D5, DCMI_D7. |+| 63 | VSS | power_in | Digital ground supply pin (0 V reference). |+| 64 | VDD | power_in | Digital power supply pin (1.7 to 3.6 V) for core logic. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | LQFP-64(10x10) |+| Category | Embedded Processors & Controllers |+| Pins | 64 |++## CAD (KiCad official)++- Symbol: `STM32F446RCT6`+- Footprint: `Package_QFP:LQFP-64_10x10mm_P0.5mm`+- 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)+- 3D model files: `stm32f446rct6-etched.step` / `stm32f446rct6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32f446rct6.step` / `stm32f446rct6.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588906783737438208) (198 pp, sha256 `363b5edfe29c1c6a`, retrieved 2026-09-26, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm32f446rct6-datasheet.pdf)
page.jsonadded+491
@@ -0,0 +1,491 @@+{+  "slug": "stm32f446rct6",+  "version": "0.1.0",+  "type": "component",+  "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-64(10x10). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "embedded processors & controllers",+    "stm32f446rct6",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "stm32f446rct6.kicad_sym",+    "stm32f446rct6.kicad_mod",+    "stm32f446rct6.glb",+    "stm32f446rct6.step",+    "stm32f446rct6.lbr",+    "docs/hero.png",+    "docs/stm32f446rct6-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "STM32F446RCT6",+    "manufacturer": "STMicroelectronics",+    "package": "LQFP-64(10x10)",+    "pin_count": 64,+    "category": "Embedded Processors & Controllers",+    "subcategory": "Microcontrollers (MCU/MPU/SOC)",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588906783737438208",+    "parts": {+      "symbol": "stm32f446rct6.kicad_sym",+      "footprint": "stm32f446rct6.kicad_mod",+      "model_3d": "stm32f446rct6-etched.glb",+      "model_3d_plain": "stm32f446rct6.glb",+      "model_3d_step": "stm32f446rct6-etched.step",+      "model_3d_step_plain": "stm32f446rct6.step",+      "lbr": "stm32f446rct6.lbr"+    },+    "distributor_links": {+      "lcsc": "C915971",+      "digikey": "497-17472-ND",+      "mouser": "511-STM32F446RCT6"+    },+    "distributor_check": {+      "checked_at": "2026-09-26T21:11:07Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "497-17472-ND",+        "status": "found"+      },+      "mouser": {+        "pn": "511-STM32F446RCT6",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "VBAT",+        "type": "power_in",+        "description": "Battery supply pin (1.7 to 3.6 V) for RTC, backup SRAM, backup registers, and low-power modes."+      },+      {+        "number": "2",+        "name": "PC13",+        "type": "bidirectional",+        "description": "GPIO port C bit 13, 5 V tolerant I/O with reset as floating input; supports RTC tamper input and wakeup."+      },+      {+        "number": "3",+        "name": "PC14-OSC32_IN",+        "type": "bidirectional",+        "description": "GPIO port C bit 14 (function after reset: 32 kHz oscillator input); 5 V tolerant I/O."+      },+      {+        "number": "4",+        "name": "PC15-OSC32_OUT",+        "type": "bidirectional",+        "description": "GPIO port C bit 15 (function after reset: 32 kHz oscillator output); 5 V tolerant I/O."+      },+      {+        "number": "5",+        "name": "PH0-OSC_IN",+        "type": "bidirectional",+        "description": "GPIO port H bit 0 (function after reset: external oscillator input, 4-26 MHz); 5 V tolerant I/O."+      },+      {+        "number": "6",+        "name": "PH1-OSC_OUT",+        "type": "bidirectional",+        "description": "GPIO port H bit 1 (function after reset: external oscillator output); 5 V tolerant I/O."+      },+      {+        "number": "7",+        "name": "NRST",+        "type": "bidirectional",+        "description": "Bidirectional reset pin with weak pull-up resistor; accepts active-low reset signals and open-drain output."+      },+      {+        "number": "8",+        "name": "PC0",+        "type": "bidirectional",+        "description": "GPIO port C bit 0, 5 V tolerant I/O with reset as floating input; supports SAI1_MCLK_B, OTG_HS_ULPI_STP, FMC_SDNWE, ADC123_IN10."+      },+      {+        "number": "9",+        "name": "PC1",+        "type": "bidirectional",+        "description": "GPIO port C bit 1, 5 V tolerant I/O with reset as floating input; supports SPI/I2S/SAI functions and ADC123_IN11."+      },+      {+        "number": "10",+        "name": "PC2",+        "type": "bidirectional",+        "description": "GPIO port C bit 2, 5 V tolerant I/O with reset as floating input; supports SPI2_MISO, OTG_HS_ULPI_DIR, FMC_SDNE0, ADC123_IN12."+      },+      {+        "number": "11",+        "name": "PC3",+        "type": "bidirectional",+        "description": "GPIO port C bit 3, 5 V tolerant I/O with reset as floating input; supports SPI/I2S functions, OTG_HS_ULPI_NXT, FMC_SDCKE0, ADC123_IN13."+      },+      {+        "number": "12",+        "name": "VSSA",+        "type": "power_in",+        "description": "Analog ground supply pin (0 V reference) for ADC, DAC, and PLL circuits."+      },+      {+        "number": "13",+        "name": "VDDA",+        "type": "power_in",+        "description": "Analog power supply pin (1.8 to 3.6 V) for analog blocks including ADC, DAC, comparators, and operational amplifiers."+      },+      {+        "number": "14",+        "name": "PA0-WKUP",+        "type": "bidirectional",+        "description": "GPIO port A bit 0 (function after reset: wakeup pin), 5 V tolerant I/O; supports TIM2/TIM5/TIM8, USART2, UART4, ADC123_IN0, wakeup/tamper."+      },+      {+        "number": "15",+        "name": "PA1",+        "type": "bidirectional",+        "description": "GPIO port A bit 1, 5 V tolerant I/O with reset as floating input; supports TIM2/TIM5, USART2/UART4, QUADSPI, SAI2, ADC123_IN1."+      },+      {+        "number": "16",+        "name": "PA2",+        "type": "bidirectional",+        "description": "GPIO port A bit 2, 5 V tolerant I/O with reset as floating input; supports TIM2/TIM5/TIM9, USART2, SAI2, ADC123_IN2."+      },+      {+        "number": "17",+        "name": "PA3",+        "type": "bidirectional",+        "description": "GPIO port A bit 3, 5 V tolerant I/O with reset as floating input; supports TIM2/TIM5/TIM9, SAI1, USART2, OTG_HS_ULPI_D0, ADC123_IN3."+      },+      {+        "number": "18",+        "name": "VSS",+        "type": "power_in",+        "description": "Digital ground supply pin (0 V reference)."+      },+      {+        "number": "19",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital power supply pin (1.7 to 3.6 V) for core logic."+      },+      {+        "number": "20",+        "name": "PA4",+        "type": "bidirectional",+        "description": "GPIO port A bit 4, 3.3 V tolerant I/O directly connected to ADC with reset as floating input; supports SPI/I2S/SAI, USART2, OTG_HS_SOF, DCMI_HSYNC, ADC12_IN4, DAC_OUT1."+      },+      {+        "number": "21",+        "name": "PA5",+        "type": "bidirectional",+        "description": "GPIO port A bit 5, 3.3 V tolerant I/O directly connected to ADC with reset as floating input; supports TIM2/TIM8, SPI1, OTG_HS_ULPI_CK, ADC12_IN5, DAC_OUT2."+      },+      {+        "number": "22",+        "name": "PA6",+        "type": "bidirectional",+        "description": "GPIO port A bit 6, 5 V tolerant I/O with reset as floating input; supports TIM1/TIM3/TIM8/TIM13, SPI1, I2S2_MCK, DCMI_PIXCLK, ADC12_IN6."+      },+      {+        "number": "23",+        "name": "PA7",+        "type": "bidirectional",+        "description": "GPIO port A bit 7, 5 V tolerant I/O with reset as floating input; supports TIM1/TIM3/TIM8/TIM14, SPI1/I2S1, FMC_SDNWE, ADC12_IN7."+      },+      {+        "number": "24",+        "name": "PC4",+        "type": "bidirectional",+        "description": "GPIO port C bit 4, 5 V tolerant I/O with reset as floating input; supports I2S1_MCK, SPDIFRX_IN2, FMC_SDNE0, ADC12_IN14."+      },+      {+        "number": "25",+        "name": "PC5",+        "type": "bidirectional",+        "description": "GPIO port C bit 5, 5 V tolerant I/O with reset as floating input; supports USART3_RX, SPDIFRX_IN3, FMC_SDCKE0, ADC12_IN15."+      },+      {+        "number": "26",+        "name": "PB0",+        "type": "bidirectional",+        "description": "GPIO port B bit 0, 5 V tolerant I/O with reset as floating input; supports TIM1/TIM3/TIM8, SPI3/I2S3, UART4, OTG_HS_ULPI_D1, SDIO_D1, ADC12_IN8."+      },+      {+        "number": "27",+        "name": "PB1",+        "type": "bidirectional",+        "description": "GPIO port B bit 1, 5 V tolerant I/O with reset as floating input; supports TIM1/TIM3/TIM8, OTG_HS_ULPI_D2, SDIO_D2, ADC12_IN9."+      },+      {+        "number": "28",+        "name": "PB2-BOOT1",+        "type": "bidirectional",+        "description": "GPIO port B bit 2 (function after reset: BOOT1 pin), 5 V tolerant I/O; supports TIM2, SAI1, SPI3/I2S3, QUADSPI_CLK, OTG_HS_ULPI_D4, SDIO_CK."+      },+      {+        "number": "29",+        "name": "PB10",+        "type": "bidirectional",+        "description": "GPIO port B bit 10, 5 V tolerant I/O with reset as floating input; supports TIM2, I2C2, SPI2/I2S2, SAI1, USART3, OTG_HS_ULPI_D3."+      },+      {+        "number": "30",+        "name": "VCAP_1",+        "type": "passive",+        "description": "Decoupling capacitor connection point for internal voltage regulator; requires 1 µF to 10 µF ceramic capacitor."+      },+      {+        "number": "31",+        "name": "VSS",+        "type": "power_in",+        "description": "Digital ground supply pin (0 V reference)."+      },+      {+        "number": "32",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital power supply pin (1.7 to 3.6 V) for core logic."+      },+      {+        "number": "33",+        "name": "PB12",+        "type": "bidirectional",+        "description": "GPIO port B bit 12, 5 V tolerant I/O with reset as floating input; supports TIM1, I2C2, SPI2/I2S2, SAI1, USART3, CAN2, OTG_HS_ULPI_D5, OTG_HS_ID."+      },+      {+        "number": "34",+        "name": "PB13",+        "type": "bidirectional",+        "description": "GPIO port B bit 13, 5 V tolerant I/O with reset as floating input; supports TIM1, SPI2/I2S2, USART3, CAN2, OTG_HS_ULPI_D6, OTG_HS_VBUS."+      },+      {+        "number": "35",+        "name": "PB14",+        "type": "bidirectional",+        "description": "GPIO port B bit 14, 5 V tolerant I/O supplied by VDDUSB with reset as floating input; supports TIM1/TIM8, SPI2, USART3, TIM12, OTG_HS_DM."+      },+      {+        "number": "36",+        "name": "PB15",+        "type": "bidirectional",+        "description": "GPIO port B bit 15, 5 V tolerant I/O supplied by VDDUSB with reset as floating input; supports RTC_REFIN, TIM1/TIM8, SPI2/I2S2, TIM12, OTG_HS_DP."+      },+      {+        "number": "37",+        "name": "PC6",+        "type": "bidirectional",+        "description": "GPIO port C bit 6, I2C fast-mode+ compatible 5 V tolerant I/O with reset as floating input; supports TIM3/TIM8, FMPI2C1, I2S2, USART6, SDIO_D6, DCMI_D0."+      },+      {+        "number": "38",+        "name": "PC7",+        "type": "bidirectional",+        "description": "GPIO port C bit 7, I2C fast-mode+ compatible 5 V tolerant I/O with reset as floating input; supports TIM3/TIM8, FMPI2C1, SPI2/I2S2/I2S3, SPDIFRX, USART6, SDIO_D7, DCMI_D1."+      },+      {+        "number": "39",+        "name": "PC8",+        "type": "bidirectional",+        "description": "GPIO port C bit 8, 5 V tolerant I/O with reset as floating input; supports TRACED0, TIM3/TIM8, UART5, USART6, SDIO_D0, DCMI_D2."+      },+      {+        "number": "40",+        "name": "PC9",+        "type": "bidirectional",+        "description": "GPIO port C bit 9, 5 V tolerant I/O with reset as floating input; supports MCO2, TIM3/TIM8, I2C3, I2S_CKIN, UART5, QUADSPI, SDIO_D1, DCMI_D3."+      },+      {+        "number": "41",+        "name": "PA8",+        "type": "bidirectional",+        "description": "GPIO port A bit 8, 5 V tolerant I/O with reset as floating input; supports MCO1, TIM1, I2C3, USART1, OTG_FS_SOF."+      },+      {+        "number": "42",+        "name": "PA9",+        "type": "bidirectional",+        "description": "GPIO port A bit 9, 5 V tolerant I/O with reset as floating input; supports TIM1, I2C3, SPI2/I2S2, SAI1, USART1, DCMI_D0, OTG_FS_VBUS."+      },+      {+        "number": "43",+        "name": "PA10",+        "type": "bidirectional",+        "description": "GPIO port A bit 10, 5 V tolerant I/O with reset as floating input; supports TIM1, USART1, OTG_FS_ID, DCMI_D1."+      },+      {+        "number": "44",+        "name": "PA11",+        "type": "bidirectional",+        "description": "GPIO port A bit 11, 5 V tolerant I/O supplied by VDDUSB with reset as floating input; supports TIM1, USART1, CAN1, OTG_FS_DM."+      },+      {+        "number": "45",+        "name": "PA12",+        "type": "bidirectional",+        "description": "GPIO port A bit 12, 5 V tolerant I/O supplied by VDDUSB with reset as floating input; supports TIM1, USART1, SAI2, CAN1, OTG_FS_DP."+      },+      {+        "number": "46",+        "name": "PA13",+        "type": "bidirectional",+        "description": "GPIO port A bit 13 (function after reset: JTMS-SWDIO), 5 V tolerant I/O; debug interface pin for JTAG/SWD."+      },+      {+        "number": "47",+        "name": "VSS",+        "type": "power_in",+        "description": "Digital ground supply pin (0 V reference)."+      },+      {+        "number": "48",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital power supply pin (1.7 to 3.6 V) for core logic."+      },+      {+        "number": "49",+        "name": "PA14",+        "type": "bidirectional",+        "description": "GPIO port A bit 14 (function after reset: JTCK-SWCLK), 5 V tolerant I/O; debug interface clock pin for JTAG/SWD."+      },+      {+        "number": "50",+        "name": "PA15",+        "type": "bidirectional",+        "description": "GPIO port A bit 15 (function after reset: JTDI), 5 V tolerant I/O; supports JTDI, TIM2, HDMI_CEC, SPI1/SPI3, I2S1/I2S3, UART4."+      },+      {+        "number": "51",+        "name": "PC10",+        "type": "bidirectional",+        "description": "GPIO port C bit 10, 5 V tolerant I/O with reset as floating input; supports SPI3/I2S3, USART3, UART4, QUADSPI, SDIO_D2, DCMI_D8."+      },+      {+        "number": "52",+        "name": "PC11",+        "type": "bidirectional",+        "description": "GPIO port C bit 11, 5 V tolerant I/O with reset as floating input; supports SPI3, USART3, UART4, QUADSPI, SDIO_D3, DCMI_D4."+      },+      {+        "number": "53",+        "name": "PC12",+        "type": "bidirectional",+        "description": "GPIO port C bit 12, 5 V tolerant I/O with reset as floating input; supports I2C2, SPI3/I2S3, USART3, UART5, SDIO_CK, DCMI_D9."+      },+      {+        "number": "54",+        "name": "PD2",+        "type": "bidirectional",+        "description": "GPIO port D bit 2, 5 V tolerant I/O with reset as floating input; supports TIM3, UART5, SDIO_CMD, DCMI_D11."+      },+      {+        "number": "55",+        "name": "PB3",+        "type": "bidirectional",+        "description": "GPIO port B bit 3 (function after reset: JTDO/TRACESWO), 5 V tolerant I/O; supports JTDO/TRACESWO, TIM2, I2C2, SPI1/SPI3, I2S1/I2S3."+      },+      {+        "number": "56",+        "name": "PB4",+        "type": "bidirectional",+        "description": "GPIO port B bit 4 (function after reset: NJTRST), 5 V tolerant I/O; supports NJTRST, TIM3, I2C3, SPI1/SPI3, I2S1/I2S3, SPI2/I2S2."+      },+      {+        "number": "57",+        "name": "PB5",+        "type": "bidirectional",+        "description": "GPIO port B bit 5, 5 V tolerant I/O with reset as floating input; supports TIM3, I2C1, SPI1/SPI3, I2S1/I2S3, CAN2, OTG_HS_ULPI_D7, FMC_SDCKE1, DCMI_D10."+      },+      {+        "number": "58",+        "name": "PB6",+        "type": "bidirectional",+        "description": "GPIO port B bit 6, 5 V tolerant I/O with reset as floating input; supports TIM4, HDMI_CEC, I2C1, USART1, CAN2, QUADSPI, FMC_SDNE1, DCMI_D5."+      },+      {+        "number": "59",+        "name": "PB7",+        "type": "bidirectional",+        "description": "GPIO port B bit 7, 5 V tolerant I/O with reset as floating input; supports TIM4, I2C1, USART1, SPDIFRX, FMC_NL, DCMI_VSYNC."+      },+      {+        "number": "60",+        "name": "BOOT0",+        "type": "input",+        "description": "Dedicated BOOT0 input pin (VPP in programming mode); determines boot source selection (Flash, system memory, or SRAM)."+      },+      {+        "number": "61",+        "name": "PB8",+        "type": "bidirectional",+        "description": "GPIO port B bit 8, 5 V tolerant I/O with reset as floating input; supports TIM2/TIM4/TIM10, I2C1, CAN1, SDIO_D4, DCMI_D6."+      },+      {+        "number": "62",+        "name": "PB9",+        "type": "bidirectional",+        "description": "GPIO port B bit 9, 5 V tolerant I/O with reset as floating input; supports TIM2/TIM4/TIM11, I2C1, SPI2/I2S2, SAI1, CAN1, SDIO_D5, DCMI_D7."+      },+      {+        "number": "63",+        "name": "VSS",+        "type": "power_in",+        "description": "Digital ground supply pin (0 V reference)."+      },+      {+        "number": "64",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital power supply pin (1.7 to 3.6 V) for core logic."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 62,+        "cost_usd": 1.6009,+        "at": "2026-09-26T21:10:39"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588906783737438208",+        "pages": 198,+        "sha256": "363b5edfe29c1c6a",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 64,+        "described": 64,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file