← Commit history

Initial commit: component/stm32f412ceu6

Ray ·4714cec168 ·
2 files changed +492
README.mdadded+85
@@ -0,0 +1,85 @@+# STM32F412CEU6++**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · UFQFPN-48(7x7)++STM32F412CEU6 from STMicroelectronics, in a UFQFPN-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VBAT | power_in | Backup supply pin for the RTC and backup registers; function after reset is VBAT. |+| 2 | PC13 | bidirectional | 5 V-tolerant I/O supplied through the power switch, so output mode is limited to 2 MHz with max 30 pF load and no current-source use; EVENTOUT, additional function TAMP_1. |+| 3 | PC14-OSC32_IN | bidirectional | 5 V-tolerant I/O (except in oscillator mode) supplied through the power switch with the same 2 MHz/30 pF output limits; additional function OSC32_IN. |+| 4 | PC15-OSC32_OUT | bidirectional | 5 V-tolerant I/O (except in oscillator mode) supplied through the power switch with the same 2 MHz/30 pF output limits; additional function OSC32_OUT. |+| 5 | PH0-OSC_IN | bidirectional | 5 V-tolerant I/O (except in oscillator mode) that serves as the main oscillator input OSC_IN; alternate function EVENTOUT. |+| 6 | PH1-OSC_OUT | bidirectional | 5 V-tolerant I/O (except in oscillator mode) that serves as the main oscillator output OSC_OUT; alternate function EVENTOUT. |+| 7 | NRST | bidirectional | Bidirectional reset pin with embedded weak pull-up resistor. |+| 8 | VSSA/VREF- | power_in | Analog ground / ADC reference ground supply pin (printed as VSSA/VREF in the table). |+| 9 | VDDA/VREF+ | power_in | Analog supply and positive ADC reference voltage supply pin. |+| 10 | PA0 | bidirectional | 5 V-tolerant I/O with TIM2_CH1/ETR, TIM5_CH1, TIM8_ETR, USART2_CTS, EVENTOUT; additional functions ADC1_0, WKUP1. |+| 11 | PA1 | bidirectional | 5 V-tolerant I/O with TIM2_CH2, TIM5_CH2, SPI4_MOSI/I2S4_SD, USART2_RTS, QUADSPI_BK1_IO3, EVENTOUT; additional function ADC1_1. |+| 12 | PA2 | bidirectional | 5 V-tolerant I/O with TIM2_CH3, TIM5_CH3, TIM9_CH1, I2S2_CKIN, USART2_TX, FSMC_D4/DA4, EVENTOUT; additional function ADC1_2. |+| 13 | PA3 | bidirectional | 5 V-tolerant I/O with TIM2_CH4, TIM5_CH4, TIM9_CH2, I2S2_MCK, USART2_RX, FSMC_D5/DA5, EVENTOUT; additional function ADC1_3. |+| 14 | PA4 | bidirectional | 5 V-tolerant I/O with SPI1_NSS/I2S1_WS, SPI3_NSS/I2S3_WS, USART2_CK, DFSDM1_DATIN1, FSMC_D6/DA6, EVENTOUT; additional function ADC1_4. |+| 15 | PA5 | bidirectional | 5 V-tolerant I/O with TIM2_CH1/ETR, TIM8_CH1N, SPI1_SCK/I2S1_CK, DFSDM1_CKIN1, FSMC_D7/DA7, EVENTOUT; additional function ADC1_5. |+| 16 | PA6 | bidirectional | 5 V-tolerant I/O with TIM1_BKIN, TIM3_CH1, TIM8_BKIN, SPI1_MISO, I2S2_MCK, TIM13_CH1, QUADSPI_BK2_IO0, SDIO_CMD, EVENTOUT; additional function ADC1_6. |+| 17 | PA7 | bidirectional | 5 V-tolerant I/O with TIM1_CH1N, TIM3_CH2, TIM8_CH1N, SPI1_MOSI/I2S1_SD, TIM14_CH1, QUADSPI_BK2_IO1, EVENTOUT; additional function ADC1_7. |+| 18 | PB0 | bidirectional | 5 V-tolerant I/O with TIM1_CH2N, TIM3_CH3, TIM8_CH2N, SPI5_SCK/I2S5_CK, EVENTOUT; additional function ADC1_8. |+| 19 | PB1 | bidirectional | 5 V-tolerant I/O with TIM1_CH3N, TIM3_CH4, TIM8_CH3N, SPI5_NSS/I2S5_WS, DFSDM1_DATIN0, QUADSPI_CLK, EVENTOUT; additional function ADC1_9. |+| 20 | PB2 | bidirectional | 5 V-tolerant I/O with DFSDM1_CKIN0, QUADSPI_CLK, EVENTOUT; additional function BOOT1. |+| 21 | PB10 | bidirectional | 5 V-tolerant I/O with TIM2_CH3, I2C2_SCL, SPI2_SCK/I2S2_CK, I2S3_MCK, USART3_TX, I2CFMP1_SCL, SDIO_D7, EVENTOUT. |+| 22 | VCAP_1 | passive | Supply pin for the 1.2 V internal regulator output, which requires an external capacitor. |+| 23 | VSS | power_in | Ground supply pin. |+| 24 | VDD | power_in | Digital supply pin (application supply 1.7 V to 3.6 V). |+| 25 | PB12 | bidirectional | 5 V-tolerant I/O with TIM1_BKIN, I2C2_SMBA, SPI2_NSS/I2S2_WS, SPI4_NSS/I2S4_WS, SPI3_SCK/I2S3_CK, USART3_CK, CAN2_RX, DFSDM1_DATIN1, FSMC_D13/DA13, EVENTOUT. |+| 26 | PB13 | bidirectional | 5 V-tolerant I/O with TIM1_CH1N, I2CFMP1_SMBA, SPI2_SCK/I2S2_CK, SPI4_SCK/I2S4_CK, USART3_CTS, CAN2_TX, DFSDM1_CKIN1, EVENTOUT. |+| 27 | PB14 | bidirectional | 5 V-tolerant I/O with TIM1_CH2N, TIM8_CH2N, I2CFMP1_SDA, SPI2_MISO, I2S2ext_SD, USART3_RTS, DFSDM1_DATIN2, TIM12_CH1, FSMC_D0/DA0, SDIO_D6, EVENTOUT. |+| 28 | PB15 | bidirectional | 5 V-tolerant I/O with RTC_50Hz, TIM1_CH3N, TIM8_CH3N, I2CFMP1_SCL, SPI2_MOSI/I2S2_SD, DFSDM1_CKIN2, TIM12_CH2, SDIO_CK, EVENTOUT. |+| 29 | PA8 | bidirectional | 5 V-tolerant I/O with MCO_1, TIM1_CH1, I2C3_SCL, USART1_CK, USB_FS_SOF, SDIO_D1, EVENTOUT. |+| 30 | PA9 | bidirectional | 5 V-tolerant I/O with TIM1_CH2, I2C3_SMBA, USART1_TX, USB_FS_VBUS, SDIO_D2, EVENTOUT. |+| 31 | PA10 | bidirectional | 5 V-tolerant I/O with TIM1_CH3, SPI5_MOSI/I2S5_SD, USART1_RX, USB_FS_ID, EVENTOUT. |+| 32 | PA11 | bidirectional | 5 V-tolerant I/O with TIM1_CH4, SPI4_MISO, USART1_CTS, USART6_TX, CAN1_RX, USB_FS_DM, EVENTOUT. |+| 33 | PA12 | bidirectional | 5 V-tolerant I/O with TIM1_ETR, SPI5_MISO, USART1_RTS, USART6_RX, CAN1_TX, USB_FS_DP, EVENTOUT. |+| 34 | PA13 | bidirectional | 5 V-tolerant I/O with JTMS-SWDIO and EVENTOUT. |+| 35 | VSS | power_in | Ground supply pin. |+| 36 | VDD | power_in | Digital supply pin (application supply 1.7 V to 3.6 V). |+| 37 | PA14 | bidirectional | 5 V-tolerant I/O with JTCK-SWCLK and EVENTOUT. |+| 38 | PA15 | bidirectional | 5 V-tolerant I/O with JTDI, TIM2_CH1/ETR, SPI1_NSS/I2S1_WS, SPI3_NSS/I2S3_WS, USART1_TX, EVENTOUT. |+| 39 | PB3 | bidirectional | 5 V-tolerant I/O with JTDO-SWO, TIM2_CH2, I2CFMP1_SDA, SPI1_SCK/I2S1_CK, SPI3_SCK/I2S3_CK, USART1_RX, I2C2_SDA, EVENTOUT. |+| 40 | PB4 | bidirectional | 5 V-tolerant I/O with JTRST, TIM3_CH1, SPI1_MISO, SPI3_MISO, I2S3ext_SD, I2C3_SDA, SDIO_D0, EVENTOUT. |+| 41 | PB5 | bidirectional | 5 V-tolerant I/O with TIM3_CH2, I2C1_SMBA, SPI1_MOSI/I2S1_SD, SPI3_MOSI/I2S3_SD, CAN2_RX, SDIO_D3, EVENTOUT. |+| 42 | PB6 | bidirectional | 5 V-tolerant I/O with TIM4_CH1, I2C1_SCL, USART1_TX, CAN2_TX, QUADSPI_BK1_NCS, SDIO_D0, EVENTOUT. |+| 43 | PB7 | bidirectional | 5 V-tolerant I/O with TIM4_CH2, I2C1_SDA, USART1_RX, FSMC_NL, EVENTOUT. |+| 44 | BOOT0 | input | Dedicated boot mode selection input pin; additional function VPP. |+| 45 | PB8 | bidirectional | 5 V-tolerant I/O with TIM4_CH3, TIM10_CH1, I2C1_SCL, SPI5_MOSI/I2S5_SD, CAN1_RX, I2C3_SDA, SDIO_D4, EVENTOUT. |+| 46 | PB9 | bidirectional | 5 V-tolerant I/O with TIM4_CH4, TIM11_CH1, I2C1_SDA, SPI2_NSS/I2S2_WS, CAN1_TX, I2C2_SDA, SDIO_D5, EVENTOUT. |+| 47 | VSS | power_in | Ground supply pin. |+| 48 | VDD | power_in | Digital supply pin (application supply 1.7 V to 3.6 V). |+| 49 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | UFQFPN-48(7x7) |+| Category | Embedded Processors & Controllers |+| Pins | 49 |++## CAD (KiCad official)++- Symbol: `STM32F412CEU6`+- Footprint: `Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm`+- 3D model: UFQFPN-48(7x7) (KiCad packages3D, STEP)+- 3D model files: `stm32f412ceu6-etched.step` / `stm32f412ceu6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32f412ceu6.step` / `stm32f412ceu6.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588923097713938432) (201 pp, sha256 `d640babe702a369d`, retrieved 2026-10-03, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm32f412ceu6-datasheet.pdf)
page.jsonadded+407
@@ -0,0 +1,407 @@+{+  "slug": "stm32f412ceu6",+  "version": "0.1.0",+  "type": "component",+  "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), UFQFPN-48(7x7). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "embedded processors & controllers",+    "stm32f412ceu6",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "stm32f412ceu6.kicad_sym",+    "stm32f412ceu6.kicad_mod",+    "stm32f412ceu6.glb",+    "stm32f412ceu6.step",+    "stm32f412ceu6.lbr",+    "docs/hero.png",+    "docs/stm32f412ceu6-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html",+    "stm32f412ceu6-hero.glb",+    "stm32f412ceu6-hero.overlay.json"+  ],+  "component": {+    "mpn": "STM32F412CEU6",+    "manufacturer": "STMicroelectronics",+    "package": "UFQFPN-48(7x7)",+    "pin_count": 49,+    "category": "Embedded Processors & Controllers",+    "subcategory": "Microcontrollers (MCU/MPU/SOC)",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588923097713938432",+    "parts": {+      "symbol": "stm32f412ceu6.kicad_sym",+      "footprint": "stm32f412ceu6.kicad_mod",+      "model_3d": "stm32f412ceu6-hero.glb",+      "model_3d_plain": "stm32f412ceu6.glb",+      "model_3d_step": "stm32f412ceu6-etched.step",+      "model_3d_step_plain": "stm32f412ceu6.step",+      "lbr": "stm32f412ceu6.lbr"+    },+    "distributor_links": {+      "lcsc": 1337664,+      "digikey": "497-18545-ND",+      "mouser": "511-STM32F412CEU6"+    },+    "distributor_check": {+      "checked_at": "2026-10-03T04:31:43Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "497-18545-ND",+        "status": "found"+      },+      "mouser": {+        "pn": "511-STM32F412CEU6",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "VBAT",+        "type": "power_in",+        "description": "Backup supply pin for the RTC and backup registers; function after reset is VBAT."+      },+      {+        "number": "2",+        "name": "PC13",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O supplied through the power switch, so output mode is limited to 2 MHz with max 30 pF load and no current-source use; EVENTOUT, additional function TAMP_1."+      },+      {+        "number": "3",+        "name": "PC14-OSC32_IN",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O (except in oscillator mode) supplied through the power switch with the same 2 MHz/30 pF output limits; additional function OSC32_IN."+      },+      {+        "number": "4",+        "name": "PC15-OSC32_OUT",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O (except in oscillator mode) supplied through the power switch with the same 2 MHz/30 pF output limits; additional function OSC32_OUT."+      },+      {+        "number": "5",+        "name": "PH0-OSC_IN",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O (except in oscillator mode) that serves as the main oscillator input OSC_IN; alternate function EVENTOUT."+      },+      {+        "number": "6",+        "name": "PH1-OSC_OUT",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O (except in oscillator mode) that serves as the main oscillator output OSC_OUT; alternate function EVENTOUT."+      },+      {+        "number": "7",+        "name": "NRST",+        "type": "bidirectional",+        "description": "Bidirectional reset pin with embedded weak pull-up resistor."+      },+      {+        "number": "8",+        "name": "VSSA/VREF-",+        "type": "power_in",+        "description": "Analog ground / ADC reference ground supply pin (printed as VSSA/VREF in the table)."+      },+      {+        "number": "9",+        "name": "VDDA/VREF+",+        "type": "power_in",+        "description": "Analog supply and positive ADC reference voltage supply pin."+      },+      {+        "number": "10",+        "name": "PA0",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O with TIM2_CH1/ETR, TIM5_CH1, TIM8_ETR, USART2_CTS, EVENTOUT; additional functions ADC1_0, WKUP1."+      },+      {+        "number": "11",+        "name": "PA1",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O with TIM2_CH2, TIM5_CH2, SPI4_MOSI/I2S4_SD, USART2_RTS, QUADSPI_BK1_IO3, EVENTOUT; additional function ADC1_1."+      },+      {+        "number": "12",+        "name": "PA2",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O with TIM2_CH3, TIM5_CH3, TIM9_CH1, I2S2_CKIN, USART2_TX, FSMC_D4/DA4, EVENTOUT; additional function ADC1_2."+      },+      {+        "number": "13",+        "name": "PA3",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O with TIM2_CH4, TIM5_CH4, TIM9_CH2, I2S2_MCK, USART2_RX, FSMC_D5/DA5, EVENTOUT; additional function ADC1_3."+      },+      {+        "number": "14",+        "name": "PA4",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O with SPI1_NSS/I2S1_WS, SPI3_NSS/I2S3_WS, USART2_CK, DFSDM1_DATIN1, FSMC_D6/DA6, EVENTOUT; additional function ADC1_4."+      },+      {+        "number": "15",+        "name": "PA5",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O with TIM2_CH1/ETR, TIM8_CH1N, SPI1_SCK/I2S1_CK, DFSDM1_CKIN1, FSMC_D7/DA7, EVENTOUT; additional function ADC1_5."+      },+      {+        "number": "16",+        "name": "PA6",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O with TIM1_BKIN, TIM3_CH1, TIM8_BKIN, SPI1_MISO, I2S2_MCK, TIM13_CH1, QUADSPI_BK2_IO0, SDIO_CMD, EVENTOUT; additional function ADC1_6."+      },+      {+        "number": "17",+        "name": "PA7",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O with TIM1_CH1N, TIM3_CH2, TIM8_CH1N, SPI1_MOSI/I2S1_SD, TIM14_CH1, QUADSPI_BK2_IO1, EVENTOUT; additional function ADC1_7."+      },+      {+        "number": "18",+        "name": "PB0",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O with TIM1_CH2N, TIM3_CH3, TIM8_CH2N, SPI5_SCK/I2S5_CK, EVENTOUT; additional function ADC1_8."+      },+      {+        "number": "19",+        "name": "PB1",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O with TIM1_CH3N, TIM3_CH4, TIM8_CH3N, SPI5_NSS/I2S5_WS, DFSDM1_DATIN0, QUADSPI_CLK, EVENTOUT; additional function ADC1_9."+      },+      {+        "number": "20",+        "name": "PB2",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O with DFSDM1_CKIN0, QUADSPI_CLK, EVENTOUT; additional function BOOT1."+      },+      {+        "number": "21",+        "name": "PB10",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O with TIM2_CH3, I2C2_SCL, SPI2_SCK/I2S2_CK, I2S3_MCK, USART3_TX, I2CFMP1_SCL, SDIO_D7, EVENTOUT."+      },+      {+        "number": "22",+        "name": "VCAP_1",+        "type": "passive",+        "description": "Supply pin for the 1.2 V internal regulator output, which requires an external capacitor."+      },+      {+        "number": "23",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground supply pin."+      },+      {+        "number": "24",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital supply pin (application supply 1.7 V to 3.6 V)."+      },+      {+        "number": "25",+        "name": "PB12",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O with TIM1_BKIN, I2C2_SMBA, SPI2_NSS/I2S2_WS, SPI4_NSS/I2S4_WS, SPI3_SCK/I2S3_CK, USART3_CK, CAN2_RX, DFSDM1_DATIN1, FSMC_D13/DA13, EVENTOUT."+      },+      {+        "number": "26",+        "name": "PB13",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O with TIM1_CH1N, I2CFMP1_SMBA, SPI2_SCK/I2S2_CK, SPI4_SCK/I2S4_CK, USART3_CTS, CAN2_TX, DFSDM1_CKIN1, EVENTOUT."+      },+      {+        "number": "27",+        "name": "PB14",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O with TIM1_CH2N, TIM8_CH2N, I2CFMP1_SDA, SPI2_MISO, I2S2ext_SD, USART3_RTS, DFSDM1_DATIN2, TIM12_CH1, FSMC_D0/DA0, SDIO_D6, EVENTOUT."+      },+      {+        "number": "28",+        "name": "PB15",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O with RTC_50Hz, TIM1_CH3N, TIM8_CH3N, I2CFMP1_SCL, SPI2_MOSI/I2S2_SD, DFSDM1_CKIN2, TIM12_CH2, SDIO_CK, EVENTOUT."+      },+      {+        "number": "29",+        "name": "PA8",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O with MCO_1, TIM1_CH1, I2C3_SCL, USART1_CK, USB_FS_SOF, SDIO_D1, EVENTOUT."+      },+      {+        "number": "30",+        "name": "PA9",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O with TIM1_CH2, I2C3_SMBA, USART1_TX, USB_FS_VBUS, SDIO_D2, EVENTOUT."+      },+      {+        "number": "31",+        "name": "PA10",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O with TIM1_CH3, SPI5_MOSI/I2S5_SD, USART1_RX, USB_FS_ID, EVENTOUT."+      },+      {+        "number": "32",+        "name": "PA11",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O with TIM1_CH4, SPI4_MISO, USART1_CTS, USART6_TX, CAN1_RX, USB_FS_DM, EVENTOUT."+      },+      {+        "number": "33",+        "name": "PA12",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O with TIM1_ETR, SPI5_MISO, USART1_RTS, USART6_RX, CAN1_TX, USB_FS_DP, EVENTOUT."+      },+      {+        "number": "34",+        "name": "PA13",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O with JTMS-SWDIO and EVENTOUT."+      },+      {+        "number": "35",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground supply pin."+      },+      {+        "number": "36",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital supply pin (application supply 1.7 V to 3.6 V)."+      },+      {+        "number": "37",+        "name": "PA14",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O with JTCK-SWCLK and EVENTOUT."+      },+      {+        "number": "38",+        "name": "PA15",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O with JTDI, TIM2_CH1/ETR, SPI1_NSS/I2S1_WS, SPI3_NSS/I2S3_WS, USART1_TX, EVENTOUT."+      },+      {+        "number": "39",+        "name": "PB3",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O with JTDO-SWO, TIM2_CH2, I2CFMP1_SDA, SPI1_SCK/I2S1_CK, SPI3_SCK/I2S3_CK, USART1_RX, I2C2_SDA, EVENTOUT."+      },+      {+        "number": "40",+        "name": "PB4",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O with JTRST, TIM3_CH1, SPI1_MISO, SPI3_MISO, I2S3ext_SD, I2C3_SDA, SDIO_D0, EVENTOUT."+      },+      {+        "number": "41",+        "name": "PB5",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O with TIM3_CH2, I2C1_SMBA, SPI1_MOSI/I2S1_SD, SPI3_MOSI/I2S3_SD, CAN2_RX, SDIO_D3, EVENTOUT."+      },+      {+        "number": "42",+        "name": "PB6",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O with TIM4_CH1, I2C1_SCL, USART1_TX, CAN2_TX, QUADSPI_BK1_NCS, SDIO_D0, EVENTOUT."+      },+      {+        "number": "43",+        "name": "PB7",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O with TIM4_CH2, I2C1_SDA, USART1_RX, FSMC_NL, EVENTOUT."+      },+      {+        "number": "44",+        "name": "BOOT0",+        "type": "input",+        "description": "Dedicated boot mode selection input pin; additional function VPP."+      },+      {+        "number": "45",+        "name": "PB8",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O with TIM4_CH3, TIM10_CH1, I2C1_SCL, SPI5_MOSI/I2S5_SD, CAN1_RX, I2C3_SDA, SDIO_D4, EVENTOUT."+      },+      {+        "number": "46",+        "name": "PB9",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O with TIM4_CH4, TIM11_CH1, I2C1_SDA, SPI2_NSS/I2S2_WS, CAN1_TX, I2C2_SDA, SDIO_D5, EVENTOUT."+      },+      {+        "number": "47",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground supply pin."+      },+      {+        "number": "48",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital supply pin (application supply 1.7 V to 3.6 V)."+      },+      {+        "number": "49",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.3",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.3",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: VCAP_1 and VCAP_2 pins are designated as 'passive' type for capacitor connections; verification that; PC14, PC15, PH0, PH1 have oscillator mode restrictions noted in Table 9 footnote 4: FT = 5V tolerant; PA13 and PA14 pins are dedicated to JTAG/SWD debug interface but can also be used as general-purpose",+          "exposed pad 49 added from the footprint",+          "7/49 pins cited to the wrong page (name found elsewhere): ['29:PA8@p56', '30:PA9@p56', '31:PA10@p56', '32:PA11@p57']"+        ],+        "pages_sent": 76,+        "cost_usd": 0.5236,+        "at": "2026-10-03T04:31:14"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588923097713938432",+        "pages": 201,+        "sha256": "d640babe702a369d",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 49,+        "described": 49,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file