STM32F411RET6
Public Made by Adomby adom
STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-64(10x10). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
LQFP64 VCAP_1 pin description should specify 4.7 µF, not 2.2 µF
Data checked 2026-09-14: live ray/stm32f411ret6 page.json fetched using adom-wiki; manufacturer DS10314 Rev 8. This is a component documentation issue; no desktop bridge is involved.
The LQFP64 pin-30 VCAP_1 description currently says to connect a 2.2 µF low-ESR capacitor. This package has only one VCAP pin. ST specifies 4.7 µF with ESR <1 Ω for a single-VCAP package (VCAP operating-conditions table, page 66); the LQFP64 pinout is Figure 11, page 36.
Source: https://www.st.com/resource/en/datasheet/stm32f411re.pdf
Please correct the package-specific pin description and any minimum-circuit examples to 4.7 µF / ESR <1 Ω. Do not apply the two-VCAP 2.2 µF-per-pin recommendation to this LQFP64 part. The new local F411 molecule already uses 4.7 µF, while preserving the original wiki description as source evidence. This is a documentation correction request; no footprint/pin-number change is requested.
Related package-specific cases: ray/stm32f401ccu6#1 and ray/stm32f411cey6tr#1. No duplicate issue was present on this page when checked.
0 Replies
Log in to reply.