component
STM32F411RET6
Public Made by Adomby adom
STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-64(10x10). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
← Commit history
page.json+452−8@@ -1,13 +1,462 @@ {+ "schema_version": 1,+ "type": "component", "slug": "stm32f411ret6",+ "title": "STM32F411RET6",+ "brief": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-64(10x10). Datasheet-verified pinout, KiCad symbol/footprint/3D.", "version": "0.1.0",- "type": "component",- "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-64(10x10). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "license": "CC-BY-SA-4.0", "tags": [ "component", "mcu", "stm32f411ret6" ],+ "component": {+ "mpn": "STM32F411RET6",+ "manufacturer": "STMicroelectronics",+ "package": "LQFP-64(10x10)",+ "pin_count": 64,+ "category": "MCU",+ "subcategory": "Microcontrollers (MCU/MPU/SOC)",+ "datasheet": "https://www.st.com/resource/en/datasheet/stm32f411ret6.pdf",+ "parts": {+ "symbol": "stm32f411ret6.kicad_sym",+ "footprint": "stm32f411ret6.kicad_mod",+ "model_3d": "stm32f411ret6.glb",+ "model_3d_step": "stm32f411ret6.step",+ "lbr": "stm32f411ret6.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "VBAT",+ "type": "power_in",+ "description": "Battery backup supply for the RTC, LSE 32 kHz oscillator, and backup registers when VDD is off. 1.65 V to 3.6 V. Tie to VDD if backup domain is not used."+ },+ {+ "number": "2",+ "name": "PC13-ANTI_TAMP",+ "type": "bidirectional",+ "description": "GPIO PC13 in the VBAT backup domain, also RTC anti-tamper input, RTC alarm/calibration output, and RTC timestamp input. Powered from VBAT switch, so output drive is limited (~3 mA, 2 MHz, 30 pF max)."+ },+ {+ "number": "3",+ "name": "PC14-OSC32_IN",+ "type": "bidirectional",+ "description": "GPIO PC14, or LSE 32.768 kHz crystal input (OSC32_IN) for the RTC. Backup domain; not 5 V tolerant when used in oscillator/analog mode."+ },+ {+ "number": "4",+ "name": "PC15-OSC32_OUT",+ "type": "bidirectional",+ "description": "GPIO PC15, or LSE 32.768 kHz crystal output (OSC32_OUT) for the RTC. Backup domain; not 5 V tolerant when used in oscillator/analog mode."+ },+ {+ "number": "5",+ "name": "PH0-OSC_IN",+ "type": "bidirectional",+ "description": "GPIO PH0, or HSE 4-26 MHz main crystal oscillator input (OSC_IN). Not 5 V tolerant in oscillator/analog mode."+ },+ {+ "number": "6",+ "name": "PH1-OSC_OUT",+ "type": "bidirectional",+ "description": "GPIO PH1, or HSE 4-26 MHz main crystal oscillator output (OSC_OUT). Not 5 V tolerant in oscillator/analog mode."+ },+ {+ "number": "7",+ "name": "NRST",+ "type": "bidirectional",+ "description": "Bidirectional device reset with embedded weak pull-up (~40 k\u03a9). Active low; drive low to reset the MCU."+ },+ {+ "number": "8",+ "name": "PC0",+ "type": "bidirectional",+ "description": "General-purpose I/O PC0, 5 V-tolerant. Alt: EVENTOUT. Additional function: ADC1_IN10."+ },+ {+ "number": "9",+ "name": "PC1",+ "type": "bidirectional",+ "description": "General-purpose I/O PC1, 5 V-tolerant. Alt: EVENTOUT. Additional function: ADC1_IN11."+ },+ {+ "number": "10",+ "name": "PC2",+ "type": "bidirectional",+ "description": "General-purpose I/O PC2, 5 V-tolerant. Alt: SPI2_MISO, I2S2ext_SD, EVENTOUT. Additional: ADC1_IN12."+ },+ {+ "number": "11",+ "name": "PC3",+ "type": "bidirectional",+ "description": "General-purpose I/O PC3, 5 V-tolerant. Alt: SPI2_MOSI/I2S2_SD, EVENTOUT. Additional: ADC1_IN13."+ },+ {+ "number": "12",+ "name": "VSSA",+ "type": "power_in",+ "description": "Analog ground reference for the ADC and analog supply. Connect to the board analog ground plane."+ },+ {+ "number": "13",+ "name": "VREF+/VDDA",+ "type": "power_in",+ "description": "In LQFP64, VREF+ and VDDA share pin 13 as the analog supply / ADC positive reference. 1.7-3.6 V (min 1.8 V for full ADC accuracy)."+ },+ {+ "number": "14",+ "name": "PA0-WKUP",+ "type": "bidirectional",+ "description": "GPIO PA0 (TC 3.3 V pad) with system wake-up capability. Alt: TIM2_CH1/TIM2_ETR, TIM5_CH1, USART2_CTS, EVENTOUT. Additional: ADC1_IN0, WKUP1."+ },+ {+ "number": "15",+ "name": "PA1",+ "type": "bidirectional",+ "description": "GPIO PA1, 5 V-tolerant. Alt: TIM2_CH2, TIM5_CH2, SPI4_MOSI/I2S4_SD, USART2_RTS, EVENTOUT. Additional: ADC1_IN1."+ },+ {+ "number": "16",+ "name": "PA2",+ "type": "bidirectional",+ "description": "GPIO PA2, 5 V-tolerant. Alt: TIM2_CH3, TIM5_CH3, TIM9_CH1, I2S2_CKIN, USART2_TX, EVENTOUT. Additional: ADC1_IN2."+ },+ {+ "number": "17",+ "name": "PA3",+ "type": "bidirectional",+ "description": "GPIO PA3, 5 V-tolerant. Alt: TIM2_CH4, TIM5_CH4, TIM9_CH2, I2S2_MCK, USART2_RX, EVENTOUT. Additional: ADC1_IN3."+ },+ {+ "number": "18",+ "name": "VSS",+ "type": "power_in",+ "description": "Digital ground reference. Connect to board ground."+ },+ {+ "number": "19",+ "name": "VDD",+ "type": "power_in",+ "description": "Digital supply, 1.7 V to 3.6 V. Decouple with a 100 nF cap close to the pin."+ },+ {+ "number": "20",+ "name": "PA4",+ "type": "bidirectional",+ "description": "GPIO PA4, 5 V-tolerant. Alt: SPI1_NSS/I2S1_WS, SPI3_NSS/I2S3_WS, USART2_CK, EVENTOUT. Additional: ADC1_IN4."+ },+ {+ "number": "21",+ "name": "PA5",+ "type": "bidirectional",+ "description": "GPIO PA5, 5 V-tolerant. Alt: TIM2_CH1/TIM2_ETR, SPI1_SCK/I2S1_CK, EVENTOUT. Additional: ADC1_IN5."+ },+ {+ "number": "22",+ "name": "PA6",+ "type": "bidirectional",+ "description": "GPIO PA6, 5 V-tolerant. Alt: TIM1_BKIN, TIM3_CH1, SPI1_MISO, I2S2_MCK, SDIO_CMD, EVENTOUT. Additional: ADC1_IN6."+ },+ {+ "number": "23",+ "name": "PA7",+ "type": "bidirectional",+ "description": "GPIO PA7, 5 V-tolerant. Alt: TIM1_CH1N, TIM3_CH2, SPI1_MOSI/I2S1_SD, EVENTOUT. Additional: ADC1_IN7."+ },+ {+ "number": "24",+ "name": "PC4",+ "type": "bidirectional",+ "description": "GPIO PC4, 5 V-tolerant. Alt: EVENTOUT. Additional: ADC1_IN14."+ },+ {+ "number": "25",+ "name": "PC5",+ "type": "bidirectional",+ "description": "GPIO PC5, 5 V-tolerant. Alt: EVENTOUT. Additional: ADC1_IN15."+ },+ {+ "number": "26",+ "name": "PB0",+ "type": "bidirectional",+ "description": "GPIO PB0, 5 V-tolerant. Alt: TIM1_CH2N, TIM3_CH3, SPI5_SCK/I2S5_CK, EVENTOUT. Additional: ADC1_IN8."+ },+ {+ "number": "27",+ "name": "PB1",+ "type": "bidirectional",+ "description": "GPIO PB1, 5 V-tolerant. Alt: TIM1_CH3N, TIM3_CH4, SPI5_NSS/I2S5_WS, EVENTOUT. Additional: ADC1_IN9."+ },+ {+ "number": "28",+ "name": "PB2/BOOT1",+ "type": "bidirectional",+ "description": "GPIO PB2, 5 V-tolerant, also latched at reset as BOOT1 to (with BOOT0) select the boot memory (main Flash, system memory or SRAM)."+ },+ {+ "number": "29",+ "name": "PB10",+ "type": "bidirectional",+ "description": "GPIO PB10, 5 V-tolerant. Alt: TIM2_CH3, I2C2_SCL, SPI2_SCK/I2S2_CK, I2S3_MCK, SDIO_D7, EVENTOUT."+ },+ {+ "number": "30",+ "name": "VCAP_1",+ "type": "passive",+ "description": "Internal 1.2 V regulator decoupling output. Connect a 2.2 \u00b5F low-ESR ceramic capacitor to VSS. Do not drive."+ },+ {+ "number": "31",+ "name": "VSS",+ "type": "power_in",+ "description": "Digital ground reference."+ },+ {+ "number": "32",+ "name": "VDD",+ "type": "power_in",+ "description": "Digital supply, 1.7 V to 3.6 V. Decouple with 100 nF close to the pin."+ },+ {+ "number": "33",+ "name": "PB12",+ "type": "bidirectional",+ "description": "GPIO PB12, 5 V-tolerant. Alt: TIM1_BKIN, I2C2_SMBA, SPI2_NSS/I2S2_WS, SPI4_NSS/I2S4_WS, SPI3_SCK/I2S3_CK, EVENTOUT."+ },+ {+ "number": "34",+ "name": "PB13",+ "type": "bidirectional",+ "description": "GPIO PB13, 5 V-tolerant. Alt: TIM1_CH1N, SPI2_SCK/I2S2_CK, SPI4_SCK/I2S4_CK, EVENTOUT."+ },+ {+ "number": "35",+ "name": "PB14",+ "type": "bidirectional",+ "description": "GPIO PB14, 5 V-tolerant. Alt: TIM1_CH2N, SPI2_MISO, I2S2ext_SD, SDIO_D6, EVENTOUT."+ },+ {+ "number": "36",+ "name": "PB15",+ "type": "bidirectional",+ "description": "GPIO PB15, 5 V-tolerant. Alt: RTC_50Hz, TIM1_CH3N, SPI2_MOSI/I2S2_SD, SDIO_CK, EVENTOUT. Additional: RTC_REFIN."+ },+ {+ "number": "37",+ "name": "PC6",+ "type": "bidirectional",+ "description": "GPIO PC6, 5 V-tolerant. Alt: TIM3_CH1, I2S2_MCK, USART6_TX, SDIO_D6, EVENTOUT."+ },+ {+ "number": "38",+ "name": "PC7",+ "type": "bidirectional",+ "description": "GPIO PC7, 5 V-tolerant. Alt: TIM3_CH2, SPI2_SCK/I2S2_CK, I2S3_MCK, USART6_RX, SDIO_D7, EVENTOUT."+ },+ {+ "number": "39",+ "name": "PC8",+ "type": "bidirectional",+ "description": "GPIO PC8, 5 V-tolerant. Alt: TIM3_CH3, USART6_CK, SDIO_D0, EVENTOUT."+ },+ {+ "number": "40",+ "name": "PC9",+ "type": "bidirectional",+ "description": "GPIO PC9, 5 V-tolerant. Alt: MCO_2, TIM3_CH4, I2C3_SDA, I2S2_CKIN, SDIO_D1, EVENTOUT."+ },+ {+ "number": "41",+ "name": "PA8",+ "type": "bidirectional",+ "description": "GPIO PA8, 5 V-tolerant. Alt: MCO_1, TIM1_CH1, I2C3_SCL, USART1_CK, USB_FS_SOF, SDIO_D1, EVENTOUT."+ },+ {+ "number": "42",+ "name": "PA9",+ "type": "bidirectional",+ "description": "GPIO PA9, 5 V-tolerant. Alt: TIM1_CH2, I2C3_SMBA, USART1_TX, USB_FS_VBUS, SDIO_D2, EVENTOUT. Additional: OTG_FS_VBUS sense input."+ },+ {+ "number": "43",+ "name": "PA10",+ "type": "bidirectional",+ "description": "GPIO PA10, 5 V-tolerant. Alt: TIM1_CH3, SPI5_MOSI/I2S5_SD, USART1_RX, USB_FS_ID, EVENTOUT."+ },+ {+ "number": "44",+ "name": "PA11",+ "type": "bidirectional",+ "description": "GPIO PA11, 5 V-tolerant. USB full-speed D- (USB_FS_DM). Alt: TIM1_CH4, SPI4_MISO, USART1_CTS, USART6_TX, EVENTOUT."+ },+ {+ "number": "45",+ "name": "PA12",+ "type": "bidirectional",+ "description": "GPIO PA12, 5 V-tolerant. USB full-speed D+ (USB_FS_DP). Alt: TIM1_ETR, SPI5_MISO, USART1_RTS, USART6_RX, EVENTOUT."+ },+ {+ "number": "46",+ "name": "PA13/JTMS-SWDIO",+ "type": "bidirectional",+ "description": "GPIO PA13, 5 V-tolerant. Default alt after reset: JTMS/SWDIO (Serial Wire Debug data or JTAG test mode select). Alt: EVENTOUT."+ },+ {+ "number": "47",+ "name": "VSS",+ "type": "power_in",+ "description": "Digital ground reference."+ },+ {+ "number": "48",+ "name": "VDD",+ "type": "power_in",+ "description": "Digital supply, 1.7 V to 3.6 V. Decouple with 100 nF close to the pin."+ },+ {+ "number": "49",+ "name": "PA14/JTCK-SWCLK",+ "type": "bidirectional",+ "description": "GPIO PA14, 5 V-tolerant. Default alt after reset: JTCK/SWCLK (Serial Wire Debug clock or JTAG test clock). Alt: EVENTOUT."+ },+ {+ "number": "50",+ "name": "PA15/JTDI",+ "type": "bidirectional",+ "description": "GPIO PA15, 5 V-tolerant. Default alt after reset: JTDI (JTAG test data in). Alt: TIM2_CH1/TIM2_ETR, SPI1_NSS/I2S1_WS, SPI3_NSS/I2S3_WS, USART1_TX, EVENTOUT."+ },+ {+ "number": "51",+ "name": "PC10",+ "type": "bidirectional",+ "description": "GPIO PC10, 5 V-tolerant. Alt: SPI3_SCK/I2S3_CK, SDIO_D2, EVENTOUT."+ },+ {+ "number": "52",+ "name": "PC11",+ "type": "bidirectional",+ "description": "GPIO PC11, 5 V-tolerant. Alt: I2S3ext_SD, SPI3_MISO, SDIO_D3, EVENTOUT."+ },+ {+ "number": "53",+ "name": "PC12",+ "type": "bidirectional",+ "description": "GPIO PC12, 5 V-tolerant. Alt: SPI3_MOSI/I2S3_SD, SDIO_CK, EVENTOUT."+ },+ {+ "number": "54",+ "name": "PD2",+ "type": "bidirectional",+ "description": "GPIO PD2, 5 V-tolerant. Alt: TIM3_ETR, SDIO_CMD, EVENTOUT."+ },+ {+ "number": "55",+ "name": "PB3/JTDO-SWO",+ "type": "bidirectional",+ "description": "GPIO PB3, 5 V-tolerant. Default alt after reset: JTDO/TRACESWO (JTAG test data out / Serial Wire trace). Alt: TIM2_CH2, SPI1_SCK/I2S1_CK, SPI3_SCK/I2S3_CK, USART1_RX, I2C2_SDA, EVENTOUT."+ },+ {+ "number": "56",+ "name": "PB4/JTRST",+ "type": "bidirectional",+ "description": "GPIO PB4, 5 V-tolerant. Default alt after reset: NJTRST (JTAG test reset, active low). Alt: TIM3_CH1, SPI1_MISO, SPI3_MISO, I2S3ext_SD, I2C3_SDA, SDIO_D0, EVENTOUT."+ },+ {+ "number": "57",+ "name": "PB5",+ "type": "bidirectional",+ "description": "GPIO PB5 (TC 3.3 V pad). Alt: TIM3_CH2, I2C1_SMBA, SPI1_MOSI/I2S1_SD, SPI3_MOSI/I2S3_SD, SDIO_D3, EVENTOUT."+ },+ {+ "number": "58",+ "name": "PB6",+ "type": "bidirectional",+ "description": "GPIO PB6, 5 V-tolerant. Alt: TIM4_CH1, I2C1_SCL, USART1_TX, EVENTOUT."+ },+ {+ "number": "59",+ "name": "PB7",+ "type": "bidirectional",+ "description": "GPIO PB7, 5 V-tolerant. Alt: TIM4_CH2, I2C1_SDA, USART1_RX, SDIO_D0, EVENTOUT."+ },+ {+ "number": "60",+ "name": "BOOT0",+ "type": "input",+ "description": "Boot-mode select input (dedicated pad, no GPIO function). Sampled at reset with BOOT1 (PB2) to choose the boot memory: main Flash, system bootloader, or embedded SRAM. Additional: VPP (Flash programming)."+ },+ {+ "number": "61",+ "name": "PB8",+ "type": "bidirectional",+ "description": "GPIO PB8, 5 V-tolerant. Alt: TIM4_CH3, TIM10_CH1, I2C1_SCL, SPI5_MOSI/I2S5_SD, I2C3_SDA, SDIO_D4, EVENTOUT."+ },+ {+ "number": "62",+ "name": "PB9",+ "type": "bidirectional",+ "description": "GPIO PB9, 5 V-tolerant. Alt: TIM4_CH4, TIM11_CH1, I2C1_SDA, SPI2_NSS/I2S2_WS, I2C2_SDA, SDIO_D5, EVENTOUT."+ },+ {+ "number": "63",+ "name": "VSS",+ "type": "power_in",+ "description": "Digital ground reference."+ },+ {+ "number": "64",+ "name": "VDD",+ "type": "power_in",+ "description": "Digital supply, 1.7 V to 3.6 V. Decouple with 100 nF close to the pin."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://www.st.com/resource/en/datasheet/stm32f411ret6.pdf",+ "pages": 149,+ "sha256": "b9ea11576a10fd6f",+ "source_tier": "mfr"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 64,+ "described": 64,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Manufacturer": "STMicroelectronics",+ "Package": "LQFP-64(10x10)",+ "Category": "MCU",+ "Pins": "64"+ }+ },+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "stm32f411ret6"+ ],+ "discovery_pitch": "STM32F411RET6 (STMicroelectronics) component page with datasheet-verified CAD.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -25,10 +474,5 @@ "docs/stm32f411ret6-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }