← Commit history

Initial commit: component/stm32f402rct6

Ray ·23599d4708 ·
2 files changed +580
README.mdadded+101
@@ -0,0 +1,101 @@+# STM32F402RCT6++**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · LQFP-64(10x10)++STM32F402RCT6 from STMicroelectronics, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VBAT | power_in | Battery backup supply (1.65 V to 3.6 V) for the RTC, 32 kHz external oscillator and backup registers when VDD is not present. |+| 2 | PC13 | bidirectional | 5V-tolerant GPIO port C pin 13 with alternate functions EVENTOUT, RTC_TAMP1, RTC_OUT, RTC_TS; powered through an internal switch limited to 3 mA sink current and 2 MHz output rate, unsuitable for driving LEDs. |+| 3 | PC14-OSC32_IN | bidirectional | 5V-tolerant GPIO port C pin 14 (except in oscillator mode) doubling as the 32.768 kHz low-speed external oscillator input OSC32_IN; alternate function EVENTOUT. |+| 4 | PC15-OSC32_OUT | bidirectional | 5V-tolerant GPIO port C pin 15 (except in oscillator mode) doubling as the 32.768 kHz low-speed external oscillator output OSC32_OUT; alternate function EVENTOUT. |+| 5 | PH0-OSC_IN | bidirectional | 5V-tolerant GPIO port H pin 0 (except in oscillator mode) doubling as the 4-26 MHz high-speed external oscillator input OSC_IN; alternate function EVENTOUT. |+| 6 | PH1-OSC_OUT | bidirectional | 5V-tolerant GPIO port H pin 1 (except in oscillator mode) doubling as the high-speed external oscillator output OSC_OUT; alternate function EVENTOUT. |+| 7 | NRST | bidirectional | Bidirectional reset pin with an internal weak pull-up resistor; driving it low resets the device; datasheet also lists EVENTOUT as an associated function. |+| 8 | PC0 | bidirectional | 5V-tolerant GPIO port C pin 0 with alternate function EVENTOUT and analog input ADC1_IN10. |+| 9 | PC1 | bidirectional | 5V-tolerant GPIO port C pin 1 with alternate function EVENTOUT and analog input ADC1_IN11. |+| 10 | PC2 | bidirectional | 5V-tolerant GPIO port C pin 2 with alternate functions SPI2_MISO/I2S2ext_SD, EVENTOUT, and analog input ADC1_IN12. |+| 11 | PC3 | bidirectional | 5V-tolerant GPIO port C pin 3 with alternate functions SPI2_MOSI/I2S2_SD, EVENTOUT, and analog input ADC1_IN13. |+| 12 | VSSA/VREF- | power_in | Analog ground and negative voltage reference input; must be decoupled and connected to VSS. |+| 13 | VDDA/VREF+ | power_in | Analog power supply and positive voltage reference input (1.7 V to 3.6 V) for the ADC, reset block, RC oscillators and PLL; must be decoupled and connected to VDD. |+| 14 | PA0 | bidirectional | 5V-tolerant GPIO port A pin 0 with alternate functions USART2_CTS, TIM2_CH1/TIM2_ETR, TIM5_CH1, EVENTOUT, analog input ADC1_IN0, and wakeup function WKUP. |+| 15 | PA1 | bidirectional | 5V-tolerant GPIO port A pin 1 with alternate functions USART2_RTS, TIM2_CH2, TIM5_CH2, EVENTOUT, and analog input ADC1_IN1. |+| 16 | PA2 | bidirectional | 5V-tolerant GPIO port A pin 2 with alternate functions USART2_TX, TIM2_CH3, TIM5_CH3, TIM9_CH1, EVENTOUT, and analog input ADC1_IN2. |+| 17 | PA3 | bidirectional | 5V-tolerant GPIO port A pin 3 with alternate functions USART2_RX, TIM2_CH4, TIM5_CH4, TIM9_CH2, EVENTOUT, and analog input ADC1_IN3. |+| 18 | VSS | power_in | Digital ground supply pin. |+| 19 | VDD | power_in | Digital power supply input, 1.8 V to 3.6 V, for I/O and the internal voltage regulator. |+| 20 | PA4 | bidirectional | 5V-tolerant GPIO port A pin 4 with alternate functions SPI1_NSS, SPI3_NSS/I2S3_WS, USART2_CK, EVENTOUT, and analog input ADC1_IN4. |+| 21 | PA5 | bidirectional | 5V-tolerant GPIO port A pin 5 with alternate functions SPI1_SCK, TIM2_CH1/TIM2_ETR, EVENTOUT, and analog input ADC1_IN5. |+| 22 | PA6 | bidirectional | 5V-tolerant GPIO port A pin 6 with alternate functions SPI1_MISO, TIM1_BKIN, TIM3_CH1, EVENTOUT, and analog input ADC1_IN6. |+| 23 | PA7 | bidirectional | 5V-tolerant GPIO port A pin 7 with alternate functions SPI1_MOSI, TIM1_CH1N, TIM3_CH2, EVENTOUT, and analog input ADC1_IN7. |+| 24 | PC4 | bidirectional | 5V-tolerant GPIO port C pin 4 with alternate function EVENTOUT and analog input ADC1_IN14. |+| 25 | PC5 | bidirectional | 5V-tolerant GPIO port C pin 5 with alternate function EVENTOUT and analog input ADC1_IN15. |+| 26 | PB0 | bidirectional | 5V-tolerant GPIO port B pin 0 with alternate functions TIM1_CH2N, TIM3_CH3, EVENTOUT, and analog input ADC1_IN8. |+| 27 | PB1 | bidirectional | 5V-tolerant GPIO port B pin 1 with alternate functions TIM1_CH3N, TIM3_CH4, EVENTOUT, and analog input ADC1_IN9. |+| 28 | PB2 | bidirectional | 5V-tolerant GPIO port B pin 2 with alternate function EVENTOUT; also serves as the BOOT1 boot-mode selection pin. |+| 29 | PB10 | bidirectional | 5V-tolerant GPIO port B pin 10 with alternate functions SPI2_SCK/I2S2_CK, I2C2_SCL, TIM2_CH3, EVENTOUT. |+| 30 | VCAP_1 | power_out | Internal voltage regulator output requiring an external ceramic decoupling capacitor (typ. 4.7 µF, ESR ≤ 1 Ω) to ground for the 1.2 V core domain. |+| 31 | VSS | power_in | Digital ground supply pin. |+| 32 | VDD | power_in | Digital power supply input, 1.8 V to 3.6 V. |+| 33 | PB12 | bidirectional | 5V-tolerant GPIO port B pin 12 with alternate functions SPI2_NSS/I2S2_WS, I2C2_SMBA, TIM1_BKIN, EVENTOUT. |+| 34 | PB13 | bidirectional | 5V-tolerant GPIO port B pin 13 with alternate functions SPI2_SCK/I2S2_CK, TIM1_CH1N, EVENTOUT. |+| 35 | PB14 | bidirectional | 5V-tolerant GPIO port B pin 14 with alternate functions SPI2_MISO/I2S2ext_SD, TIM1_CH2N, EVENTOUT. |+| 36 | PB15 | bidirectional | 5V-tolerant GPIO port B pin 15 with alternate functions SPI2_MOSI/I2S2_SD, TIM1_CH3N, EVENTOUT, and RTC_REFIN reference input. |+| 37 | PC6 | bidirectional | 5V-tolerant GPIO port C pin 6 with alternate functions I2S2_MCK, USART6_TX, TIM3_CH1, SDIO_D6, EVENTOUT. |+| 38 | PC7 | bidirectional | 5V-tolerant GPIO port C pin 7 with alternate functions I2S3_MCK, USART6_RX, TIM3_CH2, SDIO_D7, EVENTOUT. |+| 39 | PC8 | bidirectional | 5V-tolerant GPIO port C pin 8 with alternate functions USART6_CK, TIM3_CH3, SDIO_D0, EVENTOUT. |+| 40 | PC9 | bidirectional | 5V-tolerant GPIO port C pin 9 with alternate functions I2S_CKIN, I2C3_SDA, TIM3_CH4, SDIO_D1, MCO_2, EVENTOUT. |+| 41 | PA8 | bidirectional | 5V-tolerant GPIO port A pin 8 with alternate functions I2C3_SCL, USART1_CK, TIM1_CH1, OTG_FS_SOF, MCO_1, EVENTOUT. |+| 42 | PA9 | bidirectional | 5V-tolerant GPIO port A pin 9 with alternate functions I2C3_SMBA, USART1_TX, TIM1_CH2, EVENTOUT, and OTG_FS_VBUS sensing. |+| 43 | PA10 | bidirectional | 5V-tolerant GPIO port A pin 10 with alternate functions USART1_RX, TIM1_CH3, OTG_FS_ID, EVENTOUT. |+| 44 | PA11 | bidirectional | 5V-tolerant GPIO port A pin 11 with alternate functions USART1_CTS, USART6_TX, TIM1_CH4, OTG_FS_DM, EVENTOUT. |+| 45 | PA12 | bidirectional | 5V-tolerant GPIO port A pin 12 with alternate functions USART1_RTS, USART6_RX, TIM1_ETR, OTG_FS_DP, EVENTOUT. |+| 46 | PA13 | bidirectional | 5V-tolerant GPIO port A pin 13, default JTMS-SWDIO debug function, plus EVENTOUT alternate function. |+| 47 | VSS | power_in | Digital ground supply pin. |+| 48 | VDD | power_in | Digital power supply input, 1.8 V to 3.6 V. |+| 49 | PA14 | bidirectional | 5V-tolerant GPIO port A pin 14, default JTCK-SWCLK debug function, plus EVENTOUT alternate function. |+| 50 | PA15 | bidirectional | 5V-tolerant GPIO port A pin 15, default JTDI debug function, with alternate functions SPI1_NSS, SPI3_NSS/I2S3_WS, TIM2_CH1/TIM2_ETR, EVENTOUT. |+| 51 | PC10 | bidirectional | 5V-tolerant GPIO port C pin 10 with alternate functions SPI3_SCK/I2S3_CK, SDIO_D2, EVENTOUT. |+| 52 | PC11 | bidirectional | 5V-tolerant GPIO port C pin 11 with alternate functions I2S3ext_SD, SPI3_MISO, SDIO_D3, EVENTOUT. |+| 53 | PC12 | bidirectional | 5V-tolerant GPIO port C pin 12 with alternate functions SPI3_MOSI/I2S3_SD, SDIO_CK, EVENTOUT. |+| 54 | PD2 | bidirectional | 5V-tolerant GPIO port D pin 2 with alternate functions TIM3_ETR, SDIO_CMD, EVENTOUT. |+| 55 | PB3 | bidirectional | 5V-tolerant GPIO port B pin 3, default JTDO-SWO debug function, with alternate functions SPI1_SCK, SPI3_SCK/I2S3_CK, I2C2_SDA, TIM2_CH2, EVENTOUT. |+| 56 | PB4 | bidirectional | 5V-tolerant GPIO port B pin 4, default NJTRST debug function, with alternate functions SPI1_MISO, SPI3_MISO/I2S3ext_SD, I2C3_SDA, TIM3_CH1, EVENTOUT. |+| 57 | PB5 | bidirectional | 5V-tolerant GPIO port B pin 5 with alternate functions SPI1_MOSI, SPI3_MOSI/I2S3_SD, I2C1_SMBA, TIM3_CH2, EVENTOUT. |+| 58 | PB6 | bidirectional | 5V-tolerant GPIO port B pin 6 with alternate functions I2C1_SCL, USART1_TX, TIM4_CH1, EVENTOUT. |+| 59 | PB7 | bidirectional | 5V-tolerant GPIO port B pin 7 with alternate functions I2C1_SDA, USART1_RX, TIM4_CH2, EVENTOUT. |+| 60 | BOOT0 | input | Dedicated boot-mode selection input sampled at reset to choose booting from user Flash, system memory, or embedded SRAM; also labeled VPP. |+| 61 | PB8 | bidirectional | 5V-tolerant GPIO port B pin 8 with alternate functions I2C1_SCL, TIM4_CH3, TIM10_CH1, SDIO_D4, EVENTOUT. |+| 62 | PB9 | bidirectional | 5V-tolerant GPIO port B pin 9 with alternate functions SPI2_NSS/I2S2_WS, I2C1_SDA, TIM4_CH4, TIM11_CH1, SDIO_D5, EVENTOUT. |+| 63 | VSS | power_in | Digital ground supply pin. |+| 64 | VDD | power_in | Digital power supply input, 1.8 V to 3.6 V. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | LQFP-64(10x10) |+| Category | Embedded Processors & Controllers |+| Pins | 64 |++## CAD (KiCad official)++- Symbol: `STM32F402RCT6`+- Footprint: `Package_QFP:LQFP-64_10x10mm_P0.5mm`+- 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)+- 3D model files: `stm32f402rct6-etched.step` / `stm32f402rct6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32f402rct6.step` / `stm32f402rct6.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588947091943002112) (51 pp, sha256 `446178d3745d4a93`, retrieved 2026-09-22, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm32f402rct6-datasheet.pdf)
page.jsonadded+479
@@ -0,0 +1,479 @@+{+  "slug": "stm32f402rct6",+  "version": "0.1.0",+  "type": "component",+  "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-64(10x10). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "embedded processors & controllers",+    "stm32f402rct6",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "stm32f402rct6.kicad_sym",+    "stm32f402rct6.kicad_mod",+    "stm32f402rct6.glb",+    "stm32f402rct6.step",+    "stm32f402rct6.lbr",+    "docs/hero.png",+    "docs/stm32f402rct6-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "STM32F402RCT6",+    "manufacturer": "STMicroelectronics",+    "package": "LQFP-64(10x10)",+    "pin_count": 64,+    "category": "Embedded Processors & Controllers",+    "subcategory": "Microcontrollers (MCU/MPU/SOC)",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588947091943002112",+    "parts": {+      "symbol": "stm32f402rct6.kicad_sym",+      "footprint": "stm32f402rct6.kicad_mod",+      "model_3d": "stm32f402rct6-etched.glb",+      "model_3d_plain": "stm32f402rct6.glb",+      "model_3d_step": "stm32f402rct6-etched.step",+      "model_3d_step_plain": "stm32f402rct6.step",+      "lbr": "stm32f402rct6.lbr"+    },+    "distributor_links": {+      "lcsc": "C2915304"+    },+    "pins": [+      {+        "number": "1",+        "name": "VBAT",+        "type": "power_in",+        "description": "Battery backup supply (1.65 V to 3.6 V) for the RTC, 32 kHz external oscillator and backup registers when VDD is not present."+      },+      {+        "number": "2",+        "name": "PC13",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO port C pin 13 with alternate functions EVENTOUT, RTC_TAMP1, RTC_OUT, RTC_TS; powered through an internal switch limited to 3 mA sink current and 2 MHz output rate, unsuitable for driving LEDs."+      },+      {+        "number": "3",+        "name": "PC14-OSC32_IN",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO port C pin 14 (except in oscillator mode) doubling as the 32.768 kHz low-speed external oscillator input OSC32_IN; alternate function EVENTOUT."+      },+      {+        "number": "4",+        "name": "PC15-OSC32_OUT",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO port C pin 15 (except in oscillator mode) doubling as the 32.768 kHz low-speed external oscillator output OSC32_OUT; alternate function EVENTOUT."+      },+      {+        "number": "5",+        "name": "PH0-OSC_IN",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO port H pin 0 (except in oscillator mode) doubling as the 4-26 MHz high-speed external oscillator input OSC_IN; alternate function EVENTOUT."+      },+      {+        "number": "6",+        "name": "PH1-OSC_OUT",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO port H pin 1 (except in oscillator mode) doubling as the high-speed external oscillator output OSC_OUT; alternate function EVENTOUT."+      },+      {+        "number": "7",+        "name": "NRST",+        "type": "bidirectional",+        "description": "Bidirectional reset pin with an internal weak pull-up resistor; driving it low resets the device; datasheet also lists EVENTOUT as an associated function."+      },+      {+        "number": "8",+        "name": "PC0",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO port C pin 0 with alternate function EVENTOUT and analog input ADC1_IN10."+      },+      {+        "number": "9",+        "name": "PC1",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO port C pin 1 with alternate function EVENTOUT and analog input ADC1_IN11."+      },+      {+        "number": "10",+        "name": "PC2",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO port C pin 2 with alternate functions SPI2_MISO/I2S2ext_SD, EVENTOUT, and analog input ADC1_IN12."+      },+      {+        "number": "11",+        "name": "PC3",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO port C pin 3 with alternate functions SPI2_MOSI/I2S2_SD, EVENTOUT, and analog input ADC1_IN13."+      },+      {+        "number": "12",+        "name": "VSSA/VREF-",+        "type": "power_in",+        "description": "Analog ground and negative voltage reference input; must be decoupled and connected to VSS."+      },+      {+        "number": "13",+        "name": "VDDA/VREF+",+        "type": "power_in",+        "description": "Analog power supply and positive voltage reference input (1.7 V to 3.6 V) for the ADC, reset block, RC oscillators and PLL; must be decoupled and connected to VDD."+      },+      {+        "number": "14",+        "name": "PA0",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO port A pin 0 with alternate functions USART2_CTS, TIM2_CH1/TIM2_ETR, TIM5_CH1, EVENTOUT, analog input ADC1_IN0, and wakeup function WKUP."+      },+      {+        "number": "15",+        "name": "PA1",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO port A pin 1 with alternate functions USART2_RTS, TIM2_CH2, TIM5_CH2, EVENTOUT, and analog input ADC1_IN1."+      },+      {+        "number": "16",+        "name": "PA2",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO port A pin 2 with alternate functions USART2_TX, TIM2_CH3, TIM5_CH3, TIM9_CH1, EVENTOUT, and analog input ADC1_IN2."+      },+      {+        "number": "17",+        "name": "PA3",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO port A pin 3 with alternate functions USART2_RX, TIM2_CH4, TIM5_CH4, TIM9_CH2, EVENTOUT, and analog input ADC1_IN3."+      },+      {+        "number": "18",+        "name": "VSS",+        "type": "power_in",+        "description": "Digital ground supply pin."+      },+      {+        "number": "19",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital power supply input, 1.8 V to 3.6 V, for I/O and the internal voltage regulator."+      },+      {+        "number": "20",+        "name": "PA4",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO port A pin 4 with alternate functions SPI1_NSS, SPI3_NSS/I2S3_WS, USART2_CK, EVENTOUT, and analog input ADC1_IN4."+      },+      {+        "number": "21",+        "name": "PA5",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO port A pin 5 with alternate functions SPI1_SCK, TIM2_CH1/TIM2_ETR, EVENTOUT, and analog input ADC1_IN5."+      },+      {+        "number": "22",+        "name": "PA6",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO port A pin 6 with alternate functions SPI1_MISO, TIM1_BKIN, TIM3_CH1, EVENTOUT, and analog input ADC1_IN6."+      },+      {+        "number": "23",+        "name": "PA7",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO port A pin 7 with alternate functions SPI1_MOSI, TIM1_CH1N, TIM3_CH2, EVENTOUT, and analog input ADC1_IN7."+      },+      {+        "number": "24",+        "name": "PC4",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO port C pin 4 with alternate function EVENTOUT and analog input ADC1_IN14."+      },+      {+        "number": "25",+        "name": "PC5",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO port C pin 5 with alternate function EVENTOUT and analog input ADC1_IN15."+      },+      {+        "number": "26",+        "name": "PB0",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO port B pin 0 with alternate functions TIM1_CH2N, TIM3_CH3, EVENTOUT, and analog input ADC1_IN8."+      },+      {+        "number": "27",+        "name": "PB1",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO port B pin 1 with alternate functions TIM1_CH3N, TIM3_CH4, EVENTOUT, and analog input ADC1_IN9."+      },+      {+        "number": "28",+        "name": "PB2",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO port B pin 2 with alternate function EVENTOUT; also serves as the BOOT1 boot-mode selection pin."+      },+      {+        "number": "29",+        "name": "PB10",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO port B pin 10 with alternate functions SPI2_SCK/I2S2_CK, I2C2_SCL, TIM2_CH3, EVENTOUT."+      },+      {+        "number": "30",+        "name": "VCAP_1",+        "type": "power_out",+        "description": "Internal voltage regulator output requiring an external ceramic decoupling capacitor (typ. 4.7 µF, ESR ≤ 1 Ω) to ground for the 1.2 V core domain."+      },+      {+        "number": "31",+        "name": "VSS",+        "type": "power_in",+        "description": "Digital ground supply pin."+      },+      {+        "number": "32",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital power supply input, 1.8 V to 3.6 V."+      },+      {+        "number": "33",+        "name": "PB12",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO port B pin 12 with alternate functions SPI2_NSS/I2S2_WS, I2C2_SMBA, TIM1_BKIN, EVENTOUT."+      },+      {+        "number": "34",+        "name": "PB13",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO port B pin 13 with alternate functions SPI2_SCK/I2S2_CK, TIM1_CH1N, EVENTOUT."+      },+      {+        "number": "35",+        "name": "PB14",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO port B pin 14 with alternate functions SPI2_MISO/I2S2ext_SD, TIM1_CH2N, EVENTOUT."+      },+      {+        "number": "36",+        "name": "PB15",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO port B pin 15 with alternate functions SPI2_MOSI/I2S2_SD, TIM1_CH3N, EVENTOUT, and RTC_REFIN reference input."+      },+      {+        "number": "37",+        "name": "PC6",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO port C pin 6 with alternate functions I2S2_MCK, USART6_TX, TIM3_CH1, SDIO_D6, EVENTOUT."+      },+      {+        "number": "38",+        "name": "PC7",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO port C pin 7 with alternate functions I2S3_MCK, USART6_RX, TIM3_CH2, SDIO_D7, EVENTOUT."+      },+      {+        "number": "39",+        "name": "PC8",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO port C pin 8 with alternate functions USART6_CK, TIM3_CH3, SDIO_D0, EVENTOUT."+      },+      {+        "number": "40",+        "name": "PC9",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO port C pin 9 with alternate functions I2S_CKIN, I2C3_SDA, TIM3_CH4, SDIO_D1, MCO_2, EVENTOUT."+      },+      {+        "number": "41",+        "name": "PA8",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO port A pin 8 with alternate functions I2C3_SCL, USART1_CK, TIM1_CH1, OTG_FS_SOF, MCO_1, EVENTOUT."+      },+      {+        "number": "42",+        "name": "PA9",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO port A pin 9 with alternate functions I2C3_SMBA, USART1_TX, TIM1_CH2, EVENTOUT, and OTG_FS_VBUS sensing."+      },+      {+        "number": "43",+        "name": "PA10",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO port A pin 10 with alternate functions USART1_RX, TIM1_CH3, OTG_FS_ID, EVENTOUT."+      },+      {+        "number": "44",+        "name": "PA11",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO port A pin 11 with alternate functions USART1_CTS, USART6_TX, TIM1_CH4, OTG_FS_DM, EVENTOUT."+      },+      {+        "number": "45",+        "name": "PA12",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO port A pin 12 with alternate functions USART1_RTS, USART6_RX, TIM1_ETR, OTG_FS_DP, EVENTOUT."+      },+      {+        "number": "46",+        "name": "PA13",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO port A pin 13, default JTMS-SWDIO debug function, plus EVENTOUT alternate function."+      },+      {+        "number": "47",+        "name": "VSS",+        "type": "power_in",+        "description": "Digital ground supply pin."+      },+      {+        "number": "48",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital power supply input, 1.8 V to 3.6 V."+      },+      {+        "number": "49",+        "name": "PA14",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO port A pin 14, default JTCK-SWCLK debug function, plus EVENTOUT alternate function."+      },+      {+        "number": "50",+        "name": "PA15",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO port A pin 15, default JTDI debug function, with alternate functions SPI1_NSS, SPI3_NSS/I2S3_WS, TIM2_CH1/TIM2_ETR, EVENTOUT."+      },+      {+        "number": "51",+        "name": "PC10",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO port C pin 10 with alternate functions SPI3_SCK/I2S3_CK, SDIO_D2, EVENTOUT."+      },+      {+        "number": "52",+        "name": "PC11",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO port C pin 11 with alternate functions I2S3ext_SD, SPI3_MISO, SDIO_D3, EVENTOUT."+      },+      {+        "number": "53",+        "name": "PC12",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO port C pin 12 with alternate functions SPI3_MOSI/I2S3_SD, SDIO_CK, EVENTOUT."+      },+      {+        "number": "54",+        "name": "PD2",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO port D pin 2 with alternate functions TIM3_ETR, SDIO_CMD, EVENTOUT."+      },+      {+        "number": "55",+        "name": "PB3",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO port B pin 3, default JTDO-SWO debug function, with alternate functions SPI1_SCK, SPI3_SCK/I2S3_CK, I2C2_SDA, TIM2_CH2, EVENTOUT."+      },+      {+        "number": "56",+        "name": "PB4",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO port B pin 4, default NJTRST debug function, with alternate functions SPI1_MISO, SPI3_MISO/I2S3ext_SD, I2C3_SDA, TIM3_CH1, EVENTOUT."+      },+      {+        "number": "57",+        "name": "PB5",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO port B pin 5 with alternate functions SPI1_MOSI, SPI3_MOSI/I2S3_SD, I2C1_SMBA, TIM3_CH2, EVENTOUT."+      },+      {+        "number": "58",+        "name": "PB6",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO port B pin 6 with alternate functions I2C1_SCL, USART1_TX, TIM4_CH1, EVENTOUT."+      },+      {+        "number": "59",+        "name": "PB7",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO port B pin 7 with alternate functions I2C1_SDA, USART1_RX, TIM4_CH2, EVENTOUT."+      },+      {+        "number": "60",+        "name": "BOOT0",+        "type": "input",+        "description": "Dedicated boot-mode selection input sampled at reset to choose booting from user Flash, system memory, or embedded SRAM; also labeled VPP."+      },+      {+        "number": "61",+        "name": "PB8",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO port B pin 8 with alternate functions I2C1_SCL, TIM4_CH3, TIM10_CH1, SDIO_D4, EVENTOUT."+      },+      {+        "number": "62",+        "name": "PB9",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO port B pin 9 with alternate functions SPI2_NSS/I2S2_WS, I2C1_SDA, TIM4_CH4, TIM11_CH1, SDIO_D5, EVENTOUT."+      },+      {+        "number": "63",+        "name": "VSS",+        "type": "power_in",+        "description": "Digital ground supply pin."+      },+      {+        "number": "64",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital power supply input, 1.8 V to 3.6 V."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: Pins 3 and 4 are not explicitly listed in Table 7 for LQFP64; they appear between the PC14/PC15 LQFP; Multiple VSS and VDD pins (shown as power_in type) appear throughout the package at various position; Analog power pins VDDA and VSSA (pins 13 and 12) must be properly decoupled per datasheet recommenda"+        ],+        "pages_sent": 51,+        "cost_usd": 0.7345,+        "at": "2026-09-22T21:11:58"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588947091943002112",+        "pages": 51,+        "sha256": "446178d3745d4a93",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 64,+        "described": 64,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file