component
STM32F401VBH6
Public Made by Adomby adom
STMicroelectronics Microcontrollers (MCU/MPU/SOC), UFBGA-100(7x7). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+136@@ -0,0 +1,136 @@+# STM32F401VBH6++**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · UFBGA-100(7x7)++STM32F401VBH6 from STMicroelectronics, in a UFBGA-100(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| B2 | PE2 | bidirectional | 5 V tolerant I/O (FT), floating input after reset; alternate functions SPI4_SCK, TRACECLK, EVENTOUT. |+| A1 | PE3 | bidirectional | 5 V tolerant I/O (FT), floating input after reset; alternate functions TRACED0, EVENTOUT. |+| B1 | PE4 | bidirectional | 5 V tolerant I/O (FT), floating input after reset; alternate functions SPI4_NSS, TRACED1, EVENTOUT. |+| C2 | PE5 | bidirectional | 5 V tolerant I/O (FT), floating input after reset; alternate functions SPI4_MISO, TIM9_CH1, TRACED2, EVENTOUT. |+| D2 | PE6 | bidirectional | 5 V tolerant I/O (FT), floating input after reset; alternate functions SPI4_MOSI, TIM9_CH2, TRACED3, EVENTOUT. |+| D3 | VSS | power_in | Ground supply pin of the device. |+| C4 | VDD | power_in | Application supply pin for the I/Os and core, 1.7 V to 3.6 V. |+| E2 | VBAT | power_in | Backup supply for the RTC and backup registers, 1 µA typ at 25 °C. |+| C1 | PC13 | bidirectional | 5 V tolerant I/O supplied through the power switch (3 mA sink limit), limited to 2 MHz with 30 pF load and not usable as a current source; alternate functions EVENTOUT, RTC_TAMP1, RTC_OUT, RTC_TS. |+| D1 | PC14-OSC32_IN (PC14) | bidirectional | I/O supplied through the power switch (3 mA sink limit) with the same output limits as PC13; additional function OSC32_IN (32 kHz oscillator input). |+| E1 | PC15-OSC32_OUT (PC15) | bidirectional | I/O supplied through the power switch (3 mA sink limit) with the same output limits as PC13; additional function OSC32_OUT (32 kHz oscillator output). |+| F2 | VSS | power_in | Ground supply pin of the device. |+| G2 | VDD | power_in | Application supply pin for the I/Os and core, 1.7 V to 3.6 V. |+| F1 | PH0-OSC_IN | bidirectional | Not 5 V tolerant when used in oscillator mode; OSC_IN is the 4-26 MHz crystal oscillator input, alternate function EVENTOUT. |+| G1 | PH1-OSC_OUT (PH1) | bidirectional | Not 5 V tolerant when used in oscillator mode; OSC_OUT is the 4-26 MHz crystal oscillator output, alternate function EVENTOUT. |+| H2 | NRST | bidirectional | Bidirectional reset pin with embedded weak pull-up resistor. |+| H1 | PC0 | bidirectional | 5 V tolerant I/O; alternate function EVENTOUT, analog input ADC1_IN10. |+| J2 | PC1 | bidirectional | 5 V tolerant I/O; alternate function EVENTOUT, analog input ADC1_IN11. |+| J3 | PC2 | bidirectional | 5 V tolerant I/O; alternate functions SPI2_MISO, I2S2ext_SD, EVENTOUT, analog input ADC1_IN12. |+| K2 | PC3 | bidirectional | 5 V tolerant I/O; alternate functions SPI2_MOSI/I2S2_SD, EVENTOUT, analog input ADC1_IN13. |+| J1 | VSSA | power_in | Analog ground pin for the ADC. |+| K1 | VREF- | power_in | Negative reference voltage input for the ADC. |+| L1 | VREF+ | power_in | Positive reference voltage input for the ADC. |+| M1 | VDDA | power_in | Analog supply pin for the ADC and reference. |+| L2 | PA0 | bidirectional | 5 V tolerant I/O; alternate functions USART2_CTS, TIM2_CH1/TIM2_ETR, TIM5_CH1, EVENTOUT, analog ADC1_IN0 and WKUP; if BYPASS_REG is tied to VDD on this UFBGA100 device, PA0 is used as an internal Reset (active low). |+| M2 | PA1 | bidirectional | 5 V tolerant I/O; alternate functions USART2_RTS, TIM2_CH2, TIM5_CH2, EVENTOUT, analog input ADC1_IN1. |+| K3 | PA2 | bidirectional | 5 V tolerant I/O; alternate functions USART2_TX, TIM2_CH3, TIM5_CH3, TIM9_CH1, EVENTOUT, analog input ADC1_IN2. |+| L3 | PA3 | bidirectional | 5 V tolerant I/O; alternate functions USART2_RX, TIM2_CH4, TIM5_CH4, TIM9_CH2, EVENTOUT, analog input ADC1_IN3. |+| E3 | BYPASS_REG | input | 5 V tolerant input that selects the regulator state; tying it to VDD selects Regulator OFF / internal reset ON mode. |+| M3 | PA4 | bidirectional | 5 V tolerant I/O; alternate functions SPI1_NSS, SPI3_NSS/I2S3_WS, USART2_CK, EVENTOUT, analog input ADC1_IN4. |+| K4 | PA5 | bidirectional | 5 V tolerant I/O; alternate functions SPI1_SCK, TIM2_CH1/TIM2_ETR, EVENTOUT, analog input ADC1_IN5. |+| L4 | PA6 | bidirectional | 5 V tolerant I/O; alternate functions SPI1_MISO, TIM1_BKIN, TIM3_CH1, EVENTOUT, analog input ADC1_IN6. |+| M4 | PA7 | bidirectional | 5 V tolerant I/O; alternate functions SPI1_MOSI, TIM1_CH1N, TIM3_CH2, EVENTOUT, analog input ADC1_IN7. |+| K5 | PC4 | bidirectional | 5 V tolerant I/O; alternate function EVENTOUT, analog input ADC1_IN14. |+| L5 | PC5 | bidirectional | 5 V tolerant I/O; alternate function EVENTOUT, analog input ADC1_IN15. |+| M5 | PB0 | bidirectional | 5 V tolerant I/O; alternate functions TIM1_CH2N, TIM3_CH3, EVENTOUT, analog input ADC1_IN8. |+| M6 | PB1 | bidirectional | 5 V tolerant I/O; alternate functions TIM1_CH3N, TIM3_CH4, EVENTOUT, analog input ADC1_IN9. |+| L6 | PB2 | bidirectional | 5 V tolerant I/O; alternate function EVENTOUT, additional function BOOT1. |+| M7 | PE7 | bidirectional | 5 V tolerant I/O; alternate functions TIM1_ETR, EVENTOUT. |+| L7 | PE8 | bidirectional | 5 V tolerant I/O; alternate functions TIM1_CH1N, EVENTOUT. |+| M8 | PE9 | bidirectional | 5 V tolerant I/O; alternate functions TIM1_CH1, EVENTOUT. |+| L8 | PE10 | bidirectional | 5 V tolerant I/O; alternate functions TIM1_CH2N, EVENTOUT. |+| M9 | PE11 | bidirectional | 5 V tolerant I/O; alternate functions SPI4_NSS, TIM1_CH2, EVENTOUT. |+| L9 | PE12 | bidirectional | 5 V tolerant I/O; alternate functions SPI4_SCK, TIM1_CH3N, EVENTOUT. |+| M10 | PE13 | bidirectional | 5 V tolerant I/O; alternate functions SPI4_MISO, TIM1_CH3, EVENTOUT. |+| M11 | PE14 | bidirectional | 5 V tolerant I/O; alternate functions SPI4_MOSI, TIM1_CH4, EVENTOUT. |+| M12 | PE15 | bidirectional | 5 V tolerant I/O; alternate functions TIM1_BKIN, EVENTOUT. |+| L10 | PB10 | bidirectional | 5 V tolerant I/O; alternate functions SPI2_SCK/I2S2_CK, I2C2_SCL, TIM2_CH3, EVENTOUT. |+| K9 | PB11 | bidirectional | 5 V tolerant I/O; alternate functions TIM2_CH4, I2C2_SDA, EVENTOUT. |+| L11 | VCAP_1 | power_in | Connection for the external capacitor of the internal voltage regulator (VCAP_1/VCAP_2). |+| F12 | VSS | power_in | Ground supply pin of the device. |+| G12 | VDD | power_in | Application supply pin for the I/Os and core, 1.7 V to 3.6 V. |+| L12 | PB12 | bidirectional | 5 V tolerant I/O; alternate functions SPI2_NSS/I2S2_WS, I2C2_SMBA, TIM1_BKIN, EVENTOUT. |+| K12 | PB13 | bidirectional | 5 V tolerant I/O; alternate functions SPI2_SCK/I2S2_CK, TIM1_CH1N, EVENTOUT. |+| K11 | PB14 | bidirectional | 5 V tolerant I/O; alternate functions SPI2_MISO, I2S2ext_SD, TIM1_CH2N, EVENTOUT. |+| K10 | PB15 | bidirectional | 5 V tolerant I/O; alternate functions SPI2_MOSI/I2S2_SD, TIM1_CH3N, EVENTOUT, additional function RTC_REFIN. |+| K8 | PD9 | bidirectional | 5 V tolerant I/O; alternate function EVENTOUT. |+| J12 | PD10 | bidirectional | 5 V tolerant I/O; alternate function EVENTOUT. |+| J11 | PD11 | bidirectional | 5 V tolerant I/O; alternate function EVENTOUT. |+| J10 | PD12 | bidirectional | 5 V tolerant I/O; alternate functions TIM4_CH1, EVENTOUT. |+| H12 | PD13 | bidirectional | 5 V tolerant I/O; alternate functions TIM4_CH2, EVENTOUT. |+| H11 | PD14 | bidirectional | 5 V tolerant I/O; alternate functions TIM4_CH3, EVENTOUT. |+| H10 | PD15 | bidirectional | 5 V tolerant I/O; alternate functions TIM4_CH4, EVENTOUT. |+| E12 | PC6 | bidirectional | 5 V tolerant I/O; alternate functions I2S2_MCK, USART6_TX, TIM3_CH1, SDIO_D6, EVENTOUT. |+| E11 | PC7 | bidirectional | 5 V tolerant I/O; alternate functions I2S3_MCK, USART6_RX, TIM3_CH2, SDIO_D7, EVENTOUT. |+| E10 | PC8 | bidirectional | 5 V tolerant I/O; alternate functions USART6_CK, TIM3_CH3, SDIO_D0, EVENTOUT. |+| D12 | PC9 | bidirectional | 5 V tolerant I/O; alternate functions I2S_CKIN, I2C3_SDA, TIM3_CH4, SDIO_D1, MCO_2, EVENTOUT. |+| D11 | PA8 | bidirectional | 5 V tolerant I/O; alternate functions I2C3_SCL, USART1_CK, TIM1_CH1, OTG_FS_SOF, MCO_1, EVENTOUT. |+| D10 | PA9 | bidirectional | 5 V tolerant I/O; alternate functions I2C3_SMBA, USART1_TX, TIM1_CH2, EVENTOUT, additional function OTG_FS_VBUS. |+| C12 | PA10 | bidirectional | 5 V tolerant I/O; alternate functions USART1_RX, TIM1_CH3, OTG_FS_ID, EVENTOUT. |+| B12 | PA11 | bidirectional | 5 V tolerant I/O; alternate functions USART1_CTS, USART6_TX, TIM1_CH4, OTG_FS_DM, EVENTOUT. |+| A12 | PA12 | bidirectional | 5 V tolerant I/O; alternate functions USART1_RTS, USART6_RX, TIM1_ETR, OTG_FS_DP, EVENTOUT. |+| A11 | PA13 (JTMS-SWDIO) | bidirectional | 5 V tolerant I/O; alternate functions JTMS-SWDIO, EVENTOUT. |+| C11 | VCAP_2 | power_in | Connection for the external capacitor of the internal voltage regulator (VCAP_1/VCAP_2). |+| F11 | VSS | power_in | Ground supply pin of the device. |+| G11 | VDD | power_in | Application supply pin for the I/Os and core, 1.7 V to 3.6 V. |+| A10 | PA14 (JTCK-SWCLK) | bidirectional | 5 V tolerant I/O; alternate functions JTCK-SWCLK, EVENTOUT. |+| A9 | PA15 (JTDI) | bidirectional | 5 V tolerant I/O; alternate functions JTDI, SPI1_NSS, SPI3_NSS/I2S3_WS, TIM2_CH1/TIM2_ETR, EVENTOUT. |+| B11 | PC10 | bidirectional | 5 V tolerant I/O; alternate functions SPI3_SCK/I2S3_CK, SDIO_D2, EVENTOUT. |+| C10 | PC11 | bidirectional | 5 V tolerant I/O; alternate functions I2S3ext_SD, SPI3_MISO, SDIO_D3, EVENTOUT. |+| B10 | PC12 | bidirectional | 5 V tolerant I/O; alternate functions SPI3_MOSI/I2S3_SD, SDIO_CK, EVENTOUT. |+| C9 | PD0 | bidirectional | 5 V tolerant I/O; alternate function EVENTOUT. |+| B9 | PD1 | bidirectional | 5 V tolerant I/O; alternate function EVENTOUT. |+| C8 | PD2 | bidirectional | 5 V tolerant I/O; alternate functions TIM3_ETR, SDIO_CMD, EVENTOUT. |+| B8 | PD3 | bidirectional | 5 V tolerant I/O; alternate functions SPI2_SCK/I2S2_CK, USART2_CTS, EVENTOUT. |+| B7 | PD4 | bidirectional | 5 V tolerant I/O; alternate functions USART2_RTS, EVENTOUT. |+| A6 | PD5 | bidirectional | 5 V tolerant I/O; alternate functions USART2_TX, EVENTOUT. |+| B6 | PD6 | bidirectional | 5 V tolerant I/O; alternate functions SPI3_MOSI/I2S3_SD, USART2_RX, EVENTOUT. |+| A5 | PD7 | bidirectional | 5 V tolerant I/O; alternate functions USART2_CK, EVENTOUT. |+| A8 | PB3 (JTDO-SWO) | bidirectional | 5 V tolerant I/O; alternate functions JTDO-SWO, SPI1_SCK, SPI3_SCK/I2S3_CK, I2C2_SDA, TIM2_CH2, EVENTOUT. |+| A7 | PB4 (NJTRST) | bidirectional | 5 V tolerant I/O; alternate functions NJTRST, SPI1_MISO, SPI3_MISO, I2S3ext_SD, I2C3_SDA, TIM3_CH1, EVENTOUT. |+| C5 | PB5 | bidirectional | 5 V tolerant I/O; alternate functions SPI1_MOSI, SPI3_MOSI/I2S3_SD, I2C1_SMBA, TIM3_CH2, EVENTOUT. |+| B5 | PB6 | bidirectional | 5 V tolerant I/O; alternate functions I2C1_SCL, USART1_TX, TIM4_CH1, EVENTOUT. |+| B4 | PB7 | bidirectional | 5 V tolerant I/O; alternate functions I2C1_SDA, USART1_RX, TIM4_CH2, EVENTOUT. |+| A4 | BOOT0 | input | Dedicated BOOT0 boot-mode input pin (input-only); alternate function VPP. |+| A3 | PB8 | bidirectional | 5 V tolerant I/O; alternate functions I2C1_SCL, TIM4_CH3, TIM10_CH1, SDIO_D4, EVENTOUT. |+| B3 | PB9 | bidirectional | 5 V tolerant I/O; alternate functions SPI2_NSS/I2S2_WS, I2C1_SDA, TIM4_CH4, TIM11_CH1, SDIO_D5, EVENTOUT. |+| C3 | PE0 | bidirectional | 5 V tolerant I/O; alternate functions TIM4_ETR, EVENTOUT. |+| A2 | PE1 | bidirectional | 5 V tolerant I/O; alternate function EVENTOUT. |+| H3 | PDR_ON | input | 5 V tolerant input (FT) used for PDR_ON control when the internal reset is OFF. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | UFBGA-100(7x7) |+| Category | Embedded Processors & Controllers |+| Pins | 100 |++## CAD (KiCad official)++- Symbol: `STM32F401VBH6`+- Footprint: `Package_BGA:UFBGA-100_7x7mm_Layout12x12_P0.5mm`+- 3D model: UFBGA-100(7x7) (KiCad packages3D, STEP)+- 3D model files: `stm32f401vbh6-etched.step` / `stm32f401vbh6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32f401vbh6.step` / `stm32f401vbh6.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8602912903494316032) (139 pp, sha256 `c38f92aa9d66e8cb`, retrieved 2026-10-08, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm32f401vbh6-datasheet.pdf)
page.jsonadded+751@@ -0,0 +1,751 @@+{+ "slug": "stm32f401vbh6",+ "version": "0.1.0",+ "type": "component",+ "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), UFBGA-100(7x7). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "embedded processors & controllers",+ "stm32f401vbh6",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "stm32f401vbh6.kicad_sym",+ "stm32f401vbh6.kicad_mod",+ "stm32f401vbh6.glb",+ "stm32f401vbh6.step",+ "stm32f401vbh6.lbr",+ "docs/hero.png",+ "docs/stm32f401vbh6-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "stm32f401vbh6-hero.glb",+ "stm32f401vbh6-hero.overlay.json"+ ],+ "component": {+ "mpn": "STM32F401VBH6",+ "manufacturer": "STMicroelectronics",+ "package": "UFBGA-100(7x7)",+ "pin_count": 100,+ "category": "Embedded Processors & Controllers",+ "subcategory": "Microcontrollers (MCU/MPU/SOC)",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8602912903494316032",+ "parts": {+ "symbol": "stm32f401vbh6.kicad_sym",+ "footprint": "stm32f401vbh6.kicad_mod",+ "model_3d": "stm32f401vbh6-hero.glb",+ "model_3d_plain": "stm32f401vbh6.glb",+ "model_3d_step": "stm32f401vbh6-etched.step",+ "model_3d_step_plain": "stm32f401vbh6.step",+ "lbr": "stm32f401vbh6.lbr"+ },+ "distributor_links": {+ "lcsc": "C2969862",+ "digikey": "STM32F401VBH6-ND",+ "mouser": "511-STM32F401VBH6"+ },+ "distributor_check": {+ "checked_at": "2026-10-08T19:43:14Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "STM32F401VBH6-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "511-STM32F401VBH6",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "B2",+ "name": "PE2",+ "type": "bidirectional",+ "description": "5 V tolerant I/O (FT), floating input after reset; alternate functions SPI4_SCK, TRACECLK, EVENTOUT."+ },+ {+ "number": "A1",+ "name": "PE3",+ "type": "bidirectional",+ "description": "5 V tolerant I/O (FT), floating input after reset; alternate functions TRACED0, EVENTOUT."+ },+ {+ "number": "B1",+ "name": "PE4",+ "type": "bidirectional",+ "description": "5 V tolerant I/O (FT), floating input after reset; alternate functions SPI4_NSS, TRACED1, EVENTOUT."+ },+ {+ "number": "C2",+ "name": "PE5",+ "type": "bidirectional",+ "description": "5 V tolerant I/O (FT), floating input after reset; alternate functions SPI4_MISO, TIM9_CH1, TRACED2, EVENTOUT."+ },+ {+ "number": "D2",+ "name": "PE6",+ "type": "bidirectional",+ "description": "5 V tolerant I/O (FT), floating input after reset; alternate functions SPI4_MOSI, TIM9_CH2, TRACED3, EVENTOUT."+ },+ {+ "number": "D3",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground supply pin of the device."+ },+ {+ "number": "C4",+ "name": "VDD",+ "type": "power_in",+ "description": "Application supply pin for the I/Os and core, 1.7 V to 3.6 V."+ },+ {+ "number": "E2",+ "name": "VBAT",+ "type": "power_in",+ "description": "Backup supply for the RTC and backup registers, 1 µA typ at 25 °C."+ },+ {+ "number": "C1",+ "name": "PC13",+ "type": "bidirectional",+ "description": "5 V tolerant I/O supplied through the power switch (3 mA sink limit), limited to 2 MHz with 30 pF load and not usable as a current source; alternate functions EVENTOUT, RTC_TAMP1, RTC_OUT, RTC_TS."+ },+ {+ "number": "D1",+ "name": "PC14-OSC32_IN (PC14)",+ "type": "bidirectional",+ "description": "I/O supplied through the power switch (3 mA sink limit) with the same output limits as PC13; additional function OSC32_IN (32 kHz oscillator input)."+ },+ {+ "number": "E1",+ "name": "PC15-OSC32_OUT (PC15)",+ "type": "bidirectional",+ "description": "I/O supplied through the power switch (3 mA sink limit) with the same output limits as PC13; additional function OSC32_OUT (32 kHz oscillator output)."+ },+ {+ "number": "F2",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground supply pin of the device."+ },+ {+ "number": "G2",+ "name": "VDD",+ "type": "power_in",+ "description": "Application supply pin for the I/Os and core, 1.7 V to 3.6 V."+ },+ {+ "number": "F1",+ "name": "PH0-OSC_IN",+ "type": "bidirectional",+ "description": "Not 5 V tolerant when used in oscillator mode; OSC_IN is the 4-26 MHz crystal oscillator input, alternate function EVENTOUT."+ },+ {+ "number": "G1",+ "name": "PH1-OSC_OUT (PH1)",+ "type": "bidirectional",+ "description": "Not 5 V tolerant when used in oscillator mode; OSC_OUT is the 4-26 MHz crystal oscillator output, alternate function EVENTOUT."+ },+ {+ "number": "H2",+ "name": "NRST",+ "type": "bidirectional",+ "description": "Bidirectional reset pin with embedded weak pull-up resistor."+ },+ {+ "number": "H1",+ "name": "PC0",+ "type": "bidirectional",+ "description": "5 V tolerant I/O; alternate function EVENTOUT, analog input ADC1_IN10."+ },+ {+ "number": "J2",+ "name": "PC1",+ "type": "bidirectional",+ "description": "5 V tolerant I/O; alternate function EVENTOUT, analog input ADC1_IN11."+ },+ {+ "number": "J3",+ "name": "PC2",+ "type": "bidirectional",+ "description": "5 V tolerant I/O; alternate functions SPI2_MISO, I2S2ext_SD, EVENTOUT, analog input ADC1_IN12."+ },+ {+ "number": "K2",+ "name": "PC3",+ "type": "bidirectional",+ "description": "5 V tolerant I/O; alternate functions SPI2_MOSI/I2S2_SD, EVENTOUT, analog input ADC1_IN13."+ },+ {+ "number": "J1",+ "name": "VSSA",+ "type": "power_in",+ "description": "Analog ground pin for the ADC."+ },+ {+ "number": "K1",+ "name": "VREF-",+ "type": "power_in",+ "description": "Negative reference voltage input for the ADC."+ },+ {+ "number": "L1",+ "name": "VREF+",+ "type": "power_in",+ "description": "Positive reference voltage input for the ADC."+ },+ {+ "number": "M1",+ "name": "VDDA",+ "type": "power_in",+ "description": "Analog supply pin for the ADC and reference."+ },+ {+ "number": "L2",+ "name": "PA0",+ "type": "bidirectional",+ "description": "5 V tolerant I/O; alternate functions USART2_CTS, TIM2_CH1/TIM2_ETR, TIM5_CH1, EVENTOUT, analog ADC1_IN0 and WKUP; if BYPASS_REG is tied to VDD on this UFBGA100 device, PA0 is used as an internal Reset (active low)."+ },+ {+ "number": "M2",+ "name": "PA1",+ "type": "bidirectional",+ "description": "5 V tolerant I/O; alternate functions USART2_RTS, TIM2_CH2, TIM5_CH2, EVENTOUT, analog input ADC1_IN1."+ },+ {+ "number": "K3",+ "name": "PA2",+ "type": "bidirectional",+ "description": "5 V tolerant I/O; alternate functions USART2_TX, TIM2_CH3, TIM5_CH3, TIM9_CH1, EVENTOUT, analog input ADC1_IN2."+ },+ {+ "number": "L3",+ "name": "PA3",+ "type": "bidirectional",+ "description": "5 V tolerant I/O; alternate functions USART2_RX, TIM2_CH4, TIM5_CH4, TIM9_CH2, EVENTOUT, analog input ADC1_IN3."+ },+ {+ "number": "E3",+ "name": "BYPASS_REG",+ "type": "input",+ "description": "5 V tolerant input that selects the regulator state; tying it to VDD selects Regulator OFF / internal reset ON mode."+ },+ {+ "number": "M3",+ "name": "PA4",+ "type": "bidirectional",+ "description": "5 V tolerant I/O; alternate functions SPI1_NSS, SPI3_NSS/I2S3_WS, USART2_CK, EVENTOUT, analog input ADC1_IN4."+ },+ {+ "number": "K4",+ "name": "PA5",+ "type": "bidirectional",+ "description": "5 V tolerant I/O; alternate functions SPI1_SCK, TIM2_CH1/TIM2_ETR, EVENTOUT, analog input ADC1_IN5."+ },+ {+ "number": "L4",+ "name": "PA6",+ "type": "bidirectional",+ "description": "5 V tolerant I/O; alternate functions SPI1_MISO, TIM1_BKIN, TIM3_CH1, EVENTOUT, analog input ADC1_IN6."+ },+ {+ "number": "M4",+ "name": "PA7",+ "type": "bidirectional",+ "description": "5 V tolerant I/O; alternate functions SPI1_MOSI, TIM1_CH1N, TIM3_CH2, EVENTOUT, analog input ADC1_IN7."+ },+ {+ "number": "K5",+ "name": "PC4",+ "type": "bidirectional",+ "description": "5 V tolerant I/O; alternate function EVENTOUT, analog input ADC1_IN14."+ },+ {+ "number": "L5",+ "name": "PC5",+ "type": "bidirectional",+ "description": "5 V tolerant I/O; alternate function EVENTOUT, analog input ADC1_IN15."+ },+ {+ "number": "M5",+ "name": "PB0",+ "type": "bidirectional",+ "description": "5 V tolerant I/O; alternate functions TIM1_CH2N, TIM3_CH3, EVENTOUT, analog input ADC1_IN8."+ },+ {+ "number": "M6",+ "name": "PB1",+ "type": "bidirectional",+ "description": "5 V tolerant I/O; alternate functions TIM1_CH3N, TIM3_CH4, EVENTOUT, analog input ADC1_IN9."+ },+ {+ "number": "L6",+ "name": "PB2",+ "type": "bidirectional",+ "description": "5 V tolerant I/O; alternate function EVENTOUT, additional function BOOT1."+ },+ {+ "number": "M7",+ "name": "PE7",+ "type": "bidirectional",+ "description": "5 V tolerant I/O; alternate functions TIM1_ETR, EVENTOUT."+ },+ {+ "number": "L7",+ "name": "PE8",+ "type": "bidirectional",+ "description": "5 V tolerant I/O; alternate functions TIM1_CH1N, EVENTOUT."+ },+ {+ "number": "M8",+ "name": "PE9",+ "type": "bidirectional",+ "description": "5 V tolerant I/O; alternate functions TIM1_CH1, EVENTOUT."+ },+ {+ "number": "L8",+ "name": "PE10",+ "type": "bidirectional",+ "description": "5 V tolerant I/O; alternate functions TIM1_CH2N, EVENTOUT."+ },+ {+ "number": "M9",+ "name": "PE11",+ "type": "bidirectional",+ "description": "5 V tolerant I/O; alternate functions SPI4_NSS, TIM1_CH2, EVENTOUT."+ },+ {+ "number": "L9",+ "name": "PE12",+ "type": "bidirectional",+ "description": "5 V tolerant I/O; alternate functions SPI4_SCK, TIM1_CH3N, EVENTOUT."+ },+ {+ "number": "M10",+ "name": "PE13",+ "type": "bidirectional",+ "description": "5 V tolerant I/O; alternate functions SPI4_MISO, TIM1_CH3, EVENTOUT."+ },+ {+ "number": "M11",+ "name": "PE14",+ "type": "bidirectional",+ "description": "5 V tolerant I/O; alternate functions SPI4_MOSI, TIM1_CH4, EVENTOUT."+ },+ {+ "number": "M12",+ "name": "PE15",+ "type": "bidirectional",+ "description": "5 V tolerant I/O; alternate functions TIM1_BKIN, EVENTOUT."+ },+ {+ "number": "L10",+ "name": "PB10",+ "type": "bidirectional",+ "description": "5 V tolerant I/O; alternate functions SPI2_SCK/I2S2_CK, I2C2_SCL, TIM2_CH3, EVENTOUT."+ },+ {+ "number": "K9",+ "name": "PB11",+ "type": "bidirectional",+ "description": "5 V tolerant I/O; alternate functions TIM2_CH4, I2C2_SDA, EVENTOUT."+ },+ {+ "number": "L11",+ "name": "VCAP_1",+ "type": "power_in",+ "description": "Connection for the external capacitor of the internal voltage regulator (VCAP_1/VCAP_2)."+ },+ {+ "number": "F12",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground supply pin of the device."+ },+ {+ "number": "G12",+ "name": "VDD",+ "type": "power_in",+ "description": "Application supply pin for the I/Os and core, 1.7 V to 3.6 V."+ },+ {+ "number": "L12",+ "name": "PB12",+ "type": "bidirectional",+ "description": "5 V tolerant I/O; alternate functions SPI2_NSS/I2S2_WS, I2C2_SMBA, TIM1_BKIN, EVENTOUT."+ },+ {+ "number": "K12",+ "name": "PB13",+ "type": "bidirectional",+ "description": "5 V tolerant I/O; alternate functions SPI2_SCK/I2S2_CK, TIM1_CH1N, EVENTOUT."+ },+ {+ "number": "K11",+ "name": "PB14",+ "type": "bidirectional",+ "description": "5 V tolerant I/O; alternate functions SPI2_MISO, I2S2ext_SD, TIM1_CH2N, EVENTOUT."+ },+ {+ "number": "K10",+ "name": "PB15",+ "type": "bidirectional",+ "description": "5 V tolerant I/O; alternate functions SPI2_MOSI/I2S2_SD, TIM1_CH3N, EVENTOUT, additional function RTC_REFIN."+ },+ {+ "number": "K8",+ "name": "PD9",+ "type": "bidirectional",+ "description": "5 V tolerant I/O; alternate function EVENTOUT."+ },+ {+ "number": "J12",+ "name": "PD10",+ "type": "bidirectional",+ "description": "5 V tolerant I/O; alternate function EVENTOUT."+ },+ {+ "number": "J11",+ "name": "PD11",+ "type": "bidirectional",+ "description": "5 V tolerant I/O; alternate function EVENTOUT."+ },+ {+ "number": "J10",+ "name": "PD12",+ "type": "bidirectional",+ "description": "5 V tolerant I/O; alternate functions TIM4_CH1, EVENTOUT."+ },+ {+ "number": "H12",+ "name": "PD13",+ "type": "bidirectional",+ "description": "5 V tolerant I/O; alternate functions TIM4_CH2, EVENTOUT."+ },+ {+ "number": "H11",+ "name": "PD14",+ "type": "bidirectional",+ "description": "5 V tolerant I/O; alternate functions TIM4_CH3, EVENTOUT."+ },+ {+ "number": "H10",+ "name": "PD15",+ "type": "bidirectional",+ "description": "5 V tolerant I/O; alternate functions TIM4_CH4, EVENTOUT."+ },+ {+ "number": "E12",+ "name": "PC6",+ "type": "bidirectional",+ "description": "5 V tolerant I/O; alternate functions I2S2_MCK, USART6_TX, TIM3_CH1, SDIO_D6, EVENTOUT."+ },+ {+ "number": "E11",+ "name": "PC7",+ "type": "bidirectional",+ "description": "5 V tolerant I/O; alternate functions I2S3_MCK, USART6_RX, TIM3_CH2, SDIO_D7, EVENTOUT."+ },+ {+ "number": "E10",+ "name": "PC8",+ "type": "bidirectional",+ "description": "5 V tolerant I/O; alternate functions USART6_CK, TIM3_CH3, SDIO_D0, EVENTOUT."+ },+ {+ "number": "D12",+ "name": "PC9",+ "type": "bidirectional",+ "description": "5 V tolerant I/O; alternate functions I2S_CKIN, I2C3_SDA, TIM3_CH4, SDIO_D1, MCO_2, EVENTOUT."+ },+ {+ "number": "D11",+ "name": "PA8",+ "type": "bidirectional",+ "description": "5 V tolerant I/O; alternate functions I2C3_SCL, USART1_CK, TIM1_CH1, OTG_FS_SOF, MCO_1, EVENTOUT."+ },+ {+ "number": "D10",+ "name": "PA9",+ "type": "bidirectional",+ "description": "5 V tolerant I/O; alternate functions I2C3_SMBA, USART1_TX, TIM1_CH2, EVENTOUT, additional function OTG_FS_VBUS."+ },+ {+ "number": "C12",+ "name": "PA10",+ "type": "bidirectional",+ "description": "5 V tolerant I/O; alternate functions USART1_RX, TIM1_CH3, OTG_FS_ID, EVENTOUT."+ },+ {+ "number": "B12",+ "name": "PA11",+ "type": "bidirectional",+ "description": "5 V tolerant I/O; alternate functions USART1_CTS, USART6_TX, TIM1_CH4, OTG_FS_DM, EVENTOUT."+ },+ {+ "number": "A12",+ "name": "PA12",+ "type": "bidirectional",+ "description": "5 V tolerant I/O; alternate functions USART1_RTS, USART6_RX, TIM1_ETR, OTG_FS_DP, EVENTOUT."+ },+ {+ "number": "A11",+ "name": "PA13 (JTMS-SWDIO)",+ "type": "bidirectional",+ "description": "5 V tolerant I/O; alternate functions JTMS-SWDIO, EVENTOUT."+ },+ {+ "number": "C11",+ "name": "VCAP_2",+ "type": "power_in",+ "description": "Connection for the external capacitor of the internal voltage regulator (VCAP_1/VCAP_2)."+ },+ {+ "number": "F11",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground supply pin of the device."+ },+ {+ "number": "G11",+ "name": "VDD",+ "type": "power_in",+ "description": "Application supply pin for the I/Os and core, 1.7 V to 3.6 V."+ },+ {+ "number": "A10",+ "name": "PA14 (JTCK-SWCLK)",+ "type": "bidirectional",+ "description": "5 V tolerant I/O; alternate functions JTCK-SWCLK, EVENTOUT."+ },+ {+ "number": "A9",+ "name": "PA15 (JTDI)",+ "type": "bidirectional",+ "description": "5 V tolerant I/O; alternate functions JTDI, SPI1_NSS, SPI3_NSS/I2S3_WS, TIM2_CH1/TIM2_ETR, EVENTOUT."+ },+ {+ "number": "B11",+ "name": "PC10",+ "type": "bidirectional",+ "description": "5 V tolerant I/O; alternate functions SPI3_SCK/I2S3_CK, SDIO_D2, EVENTOUT."+ },+ {+ "number": "C10",+ "name": "PC11",+ "type": "bidirectional",+ "description": "5 V tolerant I/O; alternate functions I2S3ext_SD, SPI3_MISO, SDIO_D3, EVENTOUT."+ },+ {+ "number": "B10",+ "name": "PC12",+ "type": "bidirectional",+ "description": "5 V tolerant I/O; alternate functions SPI3_MOSI/I2S3_SD, SDIO_CK, EVENTOUT."+ },+ {+ "number": "C9",+ "name": "PD0",+ "type": "bidirectional",+ "description": "5 V tolerant I/O; alternate function EVENTOUT."+ },+ {+ "number": "B9",+ "name": "PD1",+ "type": "bidirectional",+ "description": "5 V tolerant I/O; alternate function EVENTOUT."+ },+ {+ "number": "C8",+ "name": "PD2",+ "type": "bidirectional",+ "description": "5 V tolerant I/O; alternate functions TIM3_ETR, SDIO_CMD, EVENTOUT."+ },+ {+ "number": "B8",+ "name": "PD3",+ "type": "bidirectional",+ "description": "5 V tolerant I/O; alternate functions SPI2_SCK/I2S2_CK, USART2_CTS, EVENTOUT."+ },+ {+ "number": "B7",+ "name": "PD4",+ "type": "bidirectional",+ "description": "5 V tolerant I/O; alternate functions USART2_RTS, EVENTOUT."+ },+ {+ "number": "A6",+ "name": "PD5",+ "type": "bidirectional",+ "description": "5 V tolerant I/O; alternate functions USART2_TX, EVENTOUT."+ },+ {+ "number": "B6",+ "name": "PD6",+ "type": "bidirectional",+ "description": "5 V tolerant I/O; alternate functions SPI3_MOSI/I2S3_SD, USART2_RX, EVENTOUT."+ },+ {+ "number": "A5",+ "name": "PD7",+ "type": "bidirectional",+ "description": "5 V tolerant I/O; alternate functions USART2_CK, EVENTOUT."+ },+ {+ "number": "A8",+ "name": "PB3 (JTDO-SWO)",+ "type": "bidirectional",+ "description": "5 V tolerant I/O; alternate functions JTDO-SWO, SPI1_SCK, SPI3_SCK/I2S3_CK, I2C2_SDA, TIM2_CH2, EVENTOUT."+ },+ {+ "number": "A7",+ "name": "PB4 (NJTRST)",+ "type": "bidirectional",+ "description": "5 V tolerant I/O; alternate functions NJTRST, SPI1_MISO, SPI3_MISO, I2S3ext_SD, I2C3_SDA, TIM3_CH1, EVENTOUT."+ },+ {+ "number": "C5",+ "name": "PB5",+ "type": "bidirectional",+ "description": "5 V tolerant I/O; alternate functions SPI1_MOSI, SPI3_MOSI/I2S3_SD, I2C1_SMBA, TIM3_CH2, EVENTOUT."+ },+ {+ "number": "B5",+ "name": "PB6",+ "type": "bidirectional",+ "description": "5 V tolerant I/O; alternate functions I2C1_SCL, USART1_TX, TIM4_CH1, EVENTOUT."+ },+ {+ "number": "B4",+ "name": "PB7",+ "type": "bidirectional",+ "description": "5 V tolerant I/O; alternate functions I2C1_SDA, USART1_RX, TIM4_CH2, EVENTOUT."+ },+ {+ "number": "A4",+ "name": "BOOT0",+ "type": "input",+ "description": "Dedicated BOOT0 boot-mode input pin (input-only); alternate function VPP."+ },+ {+ "number": "A3",+ "name": "PB8",+ "type": "bidirectional",+ "description": "5 V tolerant I/O; alternate functions I2C1_SCL, TIM4_CH3, TIM10_CH1, SDIO_D4, EVENTOUT."+ },+ {+ "number": "B3",+ "name": "PB9",+ "type": "bidirectional",+ "description": "5 V tolerant I/O; alternate functions SPI2_NSS/I2S2_WS, I2C1_SDA, TIM4_CH4, TIM11_CH1, SDIO_D5, EVENTOUT."+ },+ {+ "number": "C3",+ "name": "PE0",+ "type": "bidirectional",+ "description": "5 V tolerant I/O; alternate functions TIM4_ETR, EVENTOUT."+ },+ {+ "number": "A2",+ "name": "PE1",+ "type": "bidirectional",+ "description": "5 V tolerant I/O; alternate function EVENTOUT."+ },+ {+ "number": "H3",+ "name": "PDR_ON",+ "type": "input",+ "description": "5 V tolerant input (FT) used for PDR_ON control when the internal reset is OFF."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The UFBGA100 ball map was taken from the UFBGA100 column of Table 8 (pages 37-43) because the Figure; Supply and reference pins (VSS, VDD, VSSA, VDDA, VREF+, VREF-, VBAT, VCAP_1, VCAP_2) are typed power; Footnotes applied to specific pins: PC13/PC14/PC15 are supplied through a power switch (3 mA sink li"+ ],+ "pages_sent": 56,+ "cost_usd": 0.3064,+ "at": "2026-10-08T19:42:34"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8602912903494316032",+ "pages": 139,+ "sha256": "c38f92aa9d66e8cb",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 100,+ "described": 100,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "stm32f401vbh6.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 7,+ 7,+ 0.756+ ],+ "zmin_mm": -0.006,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "d0ab576a9111252560d8bfc0698a8d90e5dcc32a2d319fd63095d01055508e34",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "stm32f401vbh6-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 7,+ 7,+ 0.756+ ],+ "zmin_mm": -0.006,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "a545af0bdff086a3460bfeb9618b1a532ad75712253ad33c425513bd8c87c85a",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}