component
STM32F401RET6
Public Made by Adomby adom
STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-64(10x10). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
← Commit history
page.json+12−9@@ -38,7 +38,7 @@ "number": "2", "name": "PC13", "type": "bidirectional",- "description": "GPIO Port C bit 13. Supplied through the power switch (limited drive: \u22642 MHz, \u226430 pF, no LED). Additional functions: RTC_TAMP1, RTC_OUT, RTC_TS. Alternate: EVENTOUT."+ "description": "GPIO Port C bit 13. Supplied through the power switch (limited drive: ≤2 MHz, ≤30 pF, no LED). Additional functions: RTC_TAMP1, RTC_OUT, RTC_TS. Alternate: EVENTOUT." }, { "number": "3",@@ -68,7 +68,7 @@ "number": "7", "name": "NRST", "type": "bidirectional",- "description": "Bidirectional device reset pin (active low) with embedded weak pull-up (~40 k\u03a9). Drive low to force a system reset; the MCU also drives it low internally during an internal reset event."+ "description": "Bidirectional device reset pin (active low) with embedded weak pull-up (~40 kΩ). Drive low to force a system reset; the MCU also drives it low internally during an internal reset event." }, { "number": "8",@@ -104,7 +104,7 @@ "number": "13", "name": "VDDA/VREF+", "type": "power_in",- "description": "Analog supply and positive ADC reference (tied together in LQFP64). 1.7 V (min) to 3.6 V; must be \u2265 VDD when both are powered."+ "description": "Analog supply and positive ADC reference (tied together in LQFP64). 1.7 V (min) to 3.6 V; must be ≥ VDD when both are powered." }, { "number": "14",@@ -140,7 +140,7 @@ "number": "19", "name": "VDD", "type": "power_in",- "description": "Digital supply, 1.7 V to 3.6 V. Decouple with 100 nF close to each VDD pin plus one bulk 4.7 \u00b5F."+ "description": "Digital supply, 1.7 V to 3.6 V. Decouple with 100 nF close to each VDD pin plus one bulk 4.7 µF." }, { "number": "20",@@ -206,7 +206,7 @@ "number": "30", "name": "VCAP1", "type": "passive",- "description": "Internal 1.2 V core-regulator decoupling. Connect a 2.2 \u00b5F (typical) low-ESR ceramic capacitor to VSS. Do NOT drive externally when the internal regulator is enabled."+ "description": "Internal 1.2 V core-regulator decoupling. Connect a 2.2 µF (typical) low-ESR ceramic capacitor to VSS. Do NOT drive externally when the internal regulator is enabled." }, { "number": "31",@@ -218,7 +218,7 @@ "number": "32", "name": "VDD", "type": "power_in",- "description": "Digital supply, 1.7 V to 3.6 V. Decouple with 100 nF close to each VDD pin plus one bulk 4.7 \u00b5F."+ "description": "Digital supply, 1.7 V to 3.6 V. Decouple with 100 nF close to each VDD pin plus one bulk 4.7 µF." }, { "number": "33",@@ -314,7 +314,7 @@ "number": "48", "name": "VDD", "type": "power_in",- "description": "Digital supply, 1.7 V to 3.6 V. Decouple with 100 nF close to each VDD pin plus one bulk 4.7 \u00b5F."+ "description": "Digital supply, 1.7 V to 3.6 V. Decouple with 100 nF close to each VDD pin plus one bulk 4.7 µF." }, { "number": "49",@@ -410,7 +410,7 @@ "number": "64", "name": "VDD", "type": "power_in",- "description": "Digital supply, 1.7 V to 3.6 V. Decouple with 100 nF close to each VDD pin plus one bulk 4.7 \u00b5F."+ "description": "Digital supply, 1.7 V to 3.6 V. Decouple with 100 nF close to each VDD pin plus one bulk 4.7 µF." } ], "provenance": {@@ -474,5 +474,8 @@ "docs/stm32f401ret6-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }