← Commit history
stm32f401rct6: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
2 files changed
+88−8
package.json+46−6@@ -89,7 +89,7 @@ "number": "7", "name": "NRST", "type": "bidirectional",- "description": "Bidirectional reset pin with an embedded weak pull-up resistor; holding it low resets the device, and it outputs a reset pulse of at least 20 \u00b5s when an internal reset source triggers."+ "description": "Bidirectional reset pin with an embedded weak pull-up resistor; holding it low resets the device, and it outputs a reset pulse of at least 20 µs when an internal reset source triggers." }, { "number": "8",@@ -227,7 +227,7 @@ "number": "30", "name": "VCAP_1", "type": "power_in",- "description": "External regulator decoupling pin requiring a 2.2 \u00b5F ceramic capacitor (ESR < 2 \u03a9) to stabilize the 1.2 V internal logic supply (replaced by a 100 nF capacitor if the regulator is bypassed)."+ "description": "External regulator decoupling pin requiring a 2.2 µF ceramic capacitor (ESR < 2 Ω) to stabilize the 1.2 V internal logic supply (replaced by a 100 nF capacitor if the regulator is bypassed)." }, { "number": "31",@@ -305,7 +305,7 @@ "number": "43", "name": "PA10", "type": "bidirectional",- "description": "5V-tolerant I/O usable as USART1_RX, TIM1_CH3, OTG_FS_ID, or EVENTOUT; this pin has a lower-value weak pull-up/pull-down (7-14 k\u03a9) associated with OTG_FS_ID."+ "description": "5V-tolerant I/O usable as USART1_RX, TIM1_CH3, OTG_FS_ID, or EVENTOUT; this pin has a lower-value weak pull-up/pull-down (7-14 kΩ) associated with OTG_FS_ID." }, { "number": "44",@@ -445,7 +445,7 @@ "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: PA0 has special function in regulator OFF mode: acts as internal reset for V12 power domain and cann; PC13-PC15 have reduced drive capability (max 3mA, max 2MHz with 30pF load) due to power switch limit; PA10 has different pull-up/pull-down resistor values (7-14k\u03a9 instead of standard 30-50k\u03a9) for OTG_FS"+ "extractor flagged: PA0 has special function in regulator OFF mode: acts as internal reset for V12 power domain and cann; PC13-PC15 have reduced drive capability (max 3mA, max 2MHz with 30pF load) due to power switch limit; PA10 has different pull-up/pull-down resistor values (7-14kΩ instead of standard 30-50kΩ) for OTG_FS" ], "pages_sent": 139, "cost_usd": 1.365,@@ -468,6 +468,46 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "stm32f401rct6.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 12.0,+ 12.0,+ 1.5+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "b0c827bc5c05552175d28affe44a5bd2ab45c9c36efff6ff07a74cc449b13db4",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "stm32f401rct6-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 12.0,+ 12.0,+ 1.5+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "ae9e3d73eb0294dadbddbd9e101bcc75d9ee00f38a5ece6e299a9e8530a66475",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }-}+}
page.json+42−2@@ -453,7 +453,47 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "stm32f401rct6.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 12.0,+ 12.0,+ 1.5+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "b0c827bc5c05552175d28affe44a5bd2ab45c9c36efff6ff07a74cc449b13db4",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "stm32f401rct6-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 12.0,+ 12.0,+ 1.5+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "ae9e3d73eb0294dadbddbd9e101bcc75d9ee00f38a5ece6e299a9e8530a66475",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }, "metadata": { "specs": {@@ -501,4 +541,4 @@ "public": true }, "updated_at": "2026-09-25T08:46:07.400Z"-}+}