← Commit history
page.json+8−5@@ -74,7 +74,7 @@ "number": "7", "name": "NRST", "type": "bidirectional",- "description": "Bidirectional reset pin with an embedded weak pull-up resistor; holding it low resets the device, and it outputs a reset pulse of at least 20 \u00b5s when an internal reset source triggers."+ "description": "Bidirectional reset pin with an embedded weak pull-up resistor; holding it low resets the device, and it outputs a reset pulse of at least 20 µs when an internal reset source triggers." }, { "number": "8",@@ -212,7 +212,7 @@ "number": "30", "name": "VCAP_1", "type": "power_in",- "description": "External regulator decoupling pin requiring a 2.2 \u00b5F ceramic capacitor (ESR < 2 \u03a9) to stabilize the 1.2 V internal logic supply (replaced by a 100 nF capacitor if the regulator is bypassed)."+ "description": "External regulator decoupling pin requiring a 2.2 µF ceramic capacitor (ESR < 2 Ω) to stabilize the 1.2 V internal logic supply (replaced by a 100 nF capacitor if the regulator is bypassed)." }, { "number": "31",@@ -290,7 +290,7 @@ "number": "43", "name": "PA10", "type": "bidirectional",- "description": "5V-tolerant I/O usable as USART1_RX, TIM1_CH3, OTG_FS_ID, or EVENTOUT; this pin has a lower-value weak pull-up/pull-down (7-14 k\u03a9) associated with OTG_FS_ID."+ "description": "5V-tolerant I/O usable as USART1_RX, TIM1_CH3, OTG_FS_ID, or EVENTOUT; this pin has a lower-value weak pull-up/pull-down (7-14 kΩ) associated with OTG_FS_ID." }, { "number": "44",@@ -430,7 +430,7 @@ "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: PA0 has special function in regulator OFF mode: acts as internal reset for V12 power domain and cann; PC13-PC15 have reduced drive capability (max 3mA, max 2MHz with 30pF load) due to power switch limit; PA10 has different pull-up/pull-down resistor values (7-14k\u03a9 instead of standard 30-50k\u03a9) for OTG_FS"+ "extractor flagged: PA0 has special function in regulator OFF mode: acts as internal reset for V12 power domain and cann; PC13-PC15 have reduced drive capability (max 3mA, max 2MHz with 30pF load) due to power switch limit; PA10 has different pull-up/pull-down resistor values (7-14kΩ instead of standard 30-50kΩ) for OTG_FS" ], "pages_sent": 139, "cost_usd": 1.365,@@ -496,5 +496,8 @@ "docs/stm32f401rct6-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }