← Commit history

Initial commit: component/stm32f401rct6

Ray ·2f622f263f ·
2 files changed +579
README.mdadded+100
@@ -0,0 +1,100 @@+# STM32F401RCT6++**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · LQFP-64(10x10)++STM32F401RCT6 from STMicroelectronics, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VBAT | power_in | Battery backup supply input (1.65-3.6 V) that powers the RTC, LSE oscillator and backup registers when VDD is not present. |+| 2 | PC13 | bidirectional | 5V-tolerant I/O supplied through the backup-domain power switch (limited to 3 mA, max 2 MHz with 30 pF load, must not be used to drive an LED) offering RTC_TAMP1, RTC_OUT, RTC_TS alternate functions or EVENTOUT. |+| 3 | PC14-OSC32_IN (PC14) | bidirectional | 5V-tolerant I/O (except in oscillator mode) supplied through the backup-domain power switch, usable as the 32.768 kHz LSE crystal oscillator input (OSC32_IN) or EVENTOUT. |+| 4 | PC15-OSC32_OUT (PC15) | bidirectional | 5V-tolerant I/O (except in oscillator mode) supplied through the backup-domain power switch, usable as the 32.768 kHz LSE crystal oscillator output (OSC32_OUT) or EVENTOUT. |+| 5 | PH0-OSC_IN (PH0) | bidirectional | 5V-tolerant I/O (except in oscillator mode) usable as the 4-26 MHz HSE crystal/ceramic resonator oscillator input (OSC_IN) or EVENTOUT. |+| 6 | PH1-OSC_OUT (PH1) | bidirectional | 5V-tolerant I/O (except in oscillator mode) usable as the 4-26 MHz HSE crystal/ceramic resonator oscillator output (OSC_OUT) or EVENTOUT. |+| 7 | NRST | bidirectional | Bidirectional reset pin with an embedded weak pull-up resistor; holding it low resets the device, and it outputs a reset pulse of at least 20 µs when an internal reset source triggers. |+| 8 | PC0 | bidirectional | 5V-tolerant I/O usable as ADC1_IN10 analog input or EVENTOUT. |+| 9 | PC1 | bidirectional | 5V-tolerant I/O usable as ADC1_IN11 analog input or EVENTOUT. |+| 10 | PC2 | bidirectional | 5V-tolerant I/O usable as SPI2_MISO, I2S2ext_SD, ADC1_IN12 analog input, or EVENTOUT. |+| 11 | PC3 | bidirectional | 5V-tolerant I/O usable as SPI2_MOSI/I2S2_SD, ADC1_IN13 analog input, or EVENTOUT. |+| 12 | VSSA/VREF- | power_in | Analog ground and ADC negative reference supply pin. |+| 13 | VDDA/VREF+ | power_in | Analog power supply (1.7-3.6 V) for the ADC, reset block, RC oscillators and PLL, internally tied to VREF+, with VDDA-VREF+ required to be less than 1.2 V. |+| 14 | PA0 | bidirectional | 5V-tolerant I/O usable as USART2_CTS, TIM2_CH1/TIM2_ETR, TIM5_CH1, ADC1_IN0 analog input, or WKUP wakeup-from-Standby input, or EVENTOUT. |+| 15 | PA1 | bidirectional | 5V-tolerant I/O usable as USART2_RTS, TIM2_CH2, TIM5_CH2, ADC1_IN1 analog input, or EVENTOUT. |+| 16 | PA2 | bidirectional | 5V-tolerant I/O usable as USART2_TX, TIM2_CH3, TIM5_CH3, TIM9_CH1, ADC1_IN2 analog input, or EVENTOUT. |+| 17 | PA3 | bidirectional | 5V-tolerant I/O usable as USART2_RX, TIM2_CH4, TIM5_CH4, TIM9_CH2, ADC1_IN3 analog input, or EVENTOUT. |+| 18 | VSS | power_in | Digital ground supply pin. |+| 19 | VDD | power_in | Digital power supply pin, standard operating voltage 1.7-3.6 V (1.8-3.6 V with the internal regulator enabled). |+| 20 | PA4 | bidirectional | 5V-tolerant I/O usable as SPI1_NSS, SPI3_NSS/I2S3_WS, USART2_CK, ADC1_IN4 analog input, or EVENTOUT. |+| 21 | PA5 | bidirectional | 5V-tolerant I/O usable as SPI1_SCK, TIM2_CH1/TIM2_ETR, ADC1_IN5 analog input, or EVENTOUT. |+| 22 | PA6 | bidirectional | 5V-tolerant I/O usable as SPI1_MISO, TIM1_BKIN, TIM3_CH1, ADC1_IN6 analog input, or EVENTOUT. |+| 23 | PA7 | bidirectional | 5V-tolerant I/O usable as SPI1_MOSI, TIM1_CH1N, TIM3_CH2, ADC1_IN7 analog input, or EVENTOUT. |+| 24 | PC4 | bidirectional | 5V-tolerant I/O usable as ADC1_IN14 analog input or EVENTOUT. |+| 25 | PC5 | bidirectional | 5V-tolerant I/O usable as ADC1_IN15 analog input or EVENTOUT. |+| 26 | PB0 | bidirectional | 5V-tolerant I/O usable as TIM1_CH2N, TIM3_CH3, ADC1_IN8 analog input, or EVENTOUT. |+| 27 | PB1 | bidirectional | 5V-tolerant I/O usable as TIM1_CH3N, TIM3_CH4, ADC1_IN9 analog input, or EVENTOUT. |+| 28 | PB2 | bidirectional | 5V-tolerant I/O usable as BOOT1, the second boot-mode select signal sampled together with BOOT0 at reset, or EVENTOUT. |+| 29 | PB10 | bidirectional | 5V-tolerant I/O usable as SPI2_SCK/I2S2_CK, I2C2_SCL, TIM2_CH3, or EVENTOUT. |+| 30 | VCAP_1 | power_in | External regulator decoupling pin requiring a 2.2 µF ceramic capacitor (ESR < 2 Ω) to stabilize the 1.2 V internal logic supply (replaced by a 100 nF capacitor if the regulator is bypassed). |+| 31 | VSS | power_in | Digital ground supply pin. |+| 32 | VDD | power_in | Digital power supply pin, standard operating voltage 1.7-3.6 V (1.8-3.6 V with the internal regulator enabled). |+| 33 | PB12 | bidirectional | 5V-tolerant I/O usable as SPI2_NSS/I2S2_WS, I2C2_SMBA, TIM1_BKIN, or EVENTOUT. |+| 34 | PB13 | bidirectional | 5V-tolerant I/O usable as SPI2_SCK/I2S2_CK, TIM1_CH1N, or EVENTOUT. |+| 35 | PB14 | bidirectional | 5V-tolerant I/O usable as SPI2_MISO, I2S2ext_SD, TIM1_CH2N, or EVENTOUT. |+| 36 | PB15 | bidirectional | 5V-tolerant I/O usable as SPI2_MOSI/I2S2_SD, TIM1_CH3N, RTC_REFIN reference clock input, or EVENTOUT. |+| 37 | PC6 | bidirectional | 5V-tolerant I/O usable as I2S2_MCK, USART6_TX, TIM3_CH1, SDIO_D6, or EVENTOUT. |+| 38 | PC7 | bidirectional | 5V-tolerant I/O usable as I2S3_MCK, USART6_RX, TIM3_CH2, SDIO_D7, or EVENTOUT. |+| 39 | PC8 | bidirectional | 5V-tolerant I/O usable as USART6_CK, TIM3_CH3, SDIO_D0, or EVENTOUT. |+| 40 | PC9 | bidirectional | 5V-tolerant I/O usable as I2S_CKIN, I2C3_SDA, TIM3_CH4, SDIO_D1, MCO_2 microcontroller clock output, or EVENTOUT. |+| 41 | PA8 | bidirectional | 5V-tolerant I/O usable as MCO_1 microcontroller clock output, I2C3_SCL, USART1_CK, TIM1_CH1, OTG_FS_SOF, or EVENTOUT. |+| 42 | PA9 | bidirectional | 5V-tolerant I/O usable as I2C3_SMBA, USART1_TX, TIM1_CH2, OTG_FS_VBUS sensing input, or EVENTOUT. |+| 43 | PA10 | bidirectional | 5V-tolerant I/O usable as USART1_RX, TIM1_CH3, OTG_FS_ID, or EVENTOUT; this pin has a lower-value weak pull-up/pull-down (7-14 kΩ) associated with OTG_FS_ID. |+| 44 | PA11 | bidirectional | 5V-tolerant I/O usable as USART1_CTS, USART6_TX, TIM1_CH4, OTG_FS_DM (USB D-), or EVENTOUT. |+| 45 | PA12 | bidirectional | 5V-tolerant I/O usable as USART1_RTS, USART6_RX, TIM1_ETR, OTG_FS_DP (USB D+), or EVENTOUT. |+| 46 | PA13 (JTMS-SWDIO) | bidirectional | 5V-tolerant I/O whose default function is JTMS-SWDIO debug data/mode select, also selectable as EVENTOUT. |+| 47 | VSS | power_in | Digital ground supply pin. |+| 48 | VDD | power_in | Digital power supply pin, standard operating voltage 1.7-3.6 V (1.8-3.6 V with the internal regulator enabled). |+| 49 | PA14 (JTCK-SWCLK) | bidirectional | 5V-tolerant I/O whose default function is JTCK-SWCLK debug clock, also selectable as EVENTOUT. |+| 50 | PA15 (JTDI) | bidirectional | 5V-tolerant I/O whose default function is JTDI debug data input, also usable as SPI1_NSS, SPI3_NSS/I2S3_WS, TIM2_CH1/TIM2_ETR, or EVENTOUT. |+| 51 | PC10 | bidirectional | 5V-tolerant I/O usable as SPI3_SCK/I2S3_CK, SDIO_D2, or EVENTOUT. |+| 52 | PC11 | bidirectional | 5V-tolerant I/O usable as I2S3ext_SD, SPI3_MISO, SDIO_D3, or EVENTOUT. |+| 53 | PC12 | bidirectional | 5V-tolerant I/O usable as SPI3_MOSI/I2S3_SD, SDIO_CK, or EVENTOUT. |+| 54 | PD2 | bidirectional | 5V-tolerant I/O usable as TIM3_ETR, SDIO_CMD, or EVENTOUT. |+| 55 | PB3 (JTDO-SWO) | bidirectional | 5V-tolerant I/O whose default function is JTDO-SWO debug trace output, also usable as SPI1_SCK, SPI3_SCK/I2S3_CK, I2C2_SDA, TIM2_CH2, or EVENTOUT. |+| 56 | PB4 (NJTRST) | bidirectional | 5V-tolerant I/O whose default function is NJTRST debug reset, also usable as SPI1_MISO, SPI3_MISO, I2S3ext_SD, I2C3_SDA, TIM3_CH1, or EVENTOUT. |+| 57 | PB5 | bidirectional | 5V-tolerant I/O usable as SPI1_MOSI, SPI3_MOSI/I2S3_SD, I2C1_SMBA, TIM3_CH2, or EVENTOUT. |+| 58 | PB6 | bidirectional | 5V-tolerant I/O usable as I2C1_SCL, USART1_TX, TIM4_CH1, or EVENTOUT. |+| 59 | PB7 | bidirectional | 5V-tolerant I/O usable as I2C1_SDA, USART1_RX, TIM4_CH2, or EVENTOUT. |+| 60 | BOOT0 | input | Dedicated boot-mode select input, together with BOOT1, sampled at reset to choose booting from user Flash, system memory or embedded SRAM; input voltage range 0-9 V and also used as the VPP high-voltage programming pin (min. 7 V, max 9 V, min. 10 mA sink). |+| 61 | PB8 | bidirectional | 5V-tolerant I/O usable as I2C1_SCL, TIM4_CH3, TIM10_CH1, SDIO_D4, or EVENTOUT. |+| 62 | PB9 | bidirectional | 5V-tolerant I/O usable as SPI2_NSS/I2S2_WS, I2C1_SDA, TIM4_CH4, TIM11_CH1, SDIO_D5, or EVENTOUT. |+| 63 | VSS | power_in | Digital ground supply pin. |+| 64 | VDD | power_in | Digital power supply pin, standard operating voltage 1.7-3.6 V (1.8-3.6 V with the internal regulator enabled). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | LQFP-64(10x10) |+| Category | Embedded Processors & Controllers |+| Pins | 64 |++## CAD (KiCad official)++- Symbol: `STM32F401RCT6`+- Footprint: `Package_QFP:LQFP-64_10x10mm_P0.5mm`+- 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)+- 3D model files: `stm32f401rct6-etched.step` / `stm32f401rct6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32f401rct6.step` / `stm32f401rct6.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586178819862769664) (139 pp, sha256 `ea0100f21bbbb0da`, retrieved 2026-09-23, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm32f401rct6-datasheet.pdf)
page.jsonadded+479
@@ -0,0 +1,479 @@+{+  "slug": "stm32f401rct6",+  "version": "0.1.0",+  "type": "component",+  "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-64(10x10). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "embedded processors & controllers",+    "stm32f401rct6",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "stm32f401rct6.kicad_sym",+    "stm32f401rct6.kicad_mod",+    "stm32f401rct6.glb",+    "stm32f401rct6.step",+    "stm32f401rct6.lbr",+    "docs/hero.png",+    "docs/stm32f401rct6-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "STM32F401RCT6",+    "manufacturer": "STMicroelectronics",+    "package": "LQFP-64(10x10)",+    "pin_count": 64,+    "category": "Embedded Processors & Controllers",+    "subcategory": "Microcontrollers (MCU/MPU/SOC)",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586178819862769664",+    "parts": {+      "symbol": "stm32f401rct6.kicad_sym",+      "footprint": "stm32f401rct6.kicad_mod",+      "model_3d": "stm32f401rct6-etched.glb",+      "model_3d_plain": "stm32f401rct6.glb",+      "model_3d_step": "stm32f401rct6-etched.step",+      "model_3d_step_plain": "stm32f401rct6.step",+      "lbr": "stm32f401rct6.lbr"+    },+    "distributor_links": {+      "lcsc": "C74524"+    },+    "pins": [+      {+        "number": "1",+        "name": "VBAT",+        "type": "power_in",+        "description": "Battery backup supply input (1.65-3.6 V) that powers the RTC, LSE oscillator and backup registers when VDD is not present."+      },+      {+        "number": "2",+        "name": "PC13",+        "type": "bidirectional",+        "description": "5V-tolerant I/O supplied through the backup-domain power switch (limited to 3 mA, max 2 MHz with 30 pF load, must not be used to drive an LED) offering RTC_TAMP1, RTC_OUT, RTC_TS alternate functions or EVENTOUT."+      },+      {+        "number": "3",+        "name": "PC14-OSC32_IN (PC14)",+        "type": "bidirectional",+        "description": "5V-tolerant I/O (except in oscillator mode) supplied through the backup-domain power switch, usable as the 32.768 kHz LSE crystal oscillator input (OSC32_IN) or EVENTOUT."+      },+      {+        "number": "4",+        "name": "PC15-OSC32_OUT (PC15)",+        "type": "bidirectional",+        "description": "5V-tolerant I/O (except in oscillator mode) supplied through the backup-domain power switch, usable as the 32.768 kHz LSE crystal oscillator output (OSC32_OUT) or EVENTOUT."+      },+      {+        "number": "5",+        "name": "PH0-OSC_IN (PH0)",+        "type": "bidirectional",+        "description": "5V-tolerant I/O (except in oscillator mode) usable as the 4-26 MHz HSE crystal/ceramic resonator oscillator input (OSC_IN) or EVENTOUT."+      },+      {+        "number": "6",+        "name": "PH1-OSC_OUT (PH1)",+        "type": "bidirectional",+        "description": "5V-tolerant I/O (except in oscillator mode) usable as the 4-26 MHz HSE crystal/ceramic resonator oscillator output (OSC_OUT) or EVENTOUT."+      },+      {+        "number": "7",+        "name": "NRST",+        "type": "bidirectional",+        "description": "Bidirectional reset pin with an embedded weak pull-up resistor; holding it low resets the device, and it outputs a reset pulse of at least 20 µs when an internal reset source triggers."+      },+      {+        "number": "8",+        "name": "PC0",+        "type": "bidirectional",+        "description": "5V-tolerant I/O usable as ADC1_IN10 analog input or EVENTOUT."+      },+      {+        "number": "9",+        "name": "PC1",+        "type": "bidirectional",+        "description": "5V-tolerant I/O usable as ADC1_IN11 analog input or EVENTOUT."+      },+      {+        "number": "10",+        "name": "PC2",+        "type": "bidirectional",+        "description": "5V-tolerant I/O usable as SPI2_MISO, I2S2ext_SD, ADC1_IN12 analog input, or EVENTOUT."+      },+      {+        "number": "11",+        "name": "PC3",+        "type": "bidirectional",+        "description": "5V-tolerant I/O usable as SPI2_MOSI/I2S2_SD, ADC1_IN13 analog input, or EVENTOUT."+      },+      {+        "number": "12",+        "name": "VSSA/VREF-",+        "type": "power_in",+        "description": "Analog ground and ADC negative reference supply pin."+      },+      {+        "number": "13",+        "name": "VDDA/VREF+",+        "type": "power_in",+        "description": "Analog power supply (1.7-3.6 V) for the ADC, reset block, RC oscillators and PLL, internally tied to VREF+, with VDDA-VREF+ required to be less than 1.2 V."+      },+      {+        "number": "14",+        "name": "PA0",+        "type": "bidirectional",+        "description": "5V-tolerant I/O usable as USART2_CTS, TIM2_CH1/TIM2_ETR, TIM5_CH1, ADC1_IN0 analog input, or WKUP wakeup-from-Standby input, or EVENTOUT."+      },+      {+        "number": "15",+        "name": "PA1",+        "type": "bidirectional",+        "description": "5V-tolerant I/O usable as USART2_RTS, TIM2_CH2, TIM5_CH2, ADC1_IN1 analog input, or EVENTOUT."+      },+      {+        "number": "16",+        "name": "PA2",+        "type": "bidirectional",+        "description": "5V-tolerant I/O usable as USART2_TX, TIM2_CH3, TIM5_CH3, TIM9_CH1, ADC1_IN2 analog input, or EVENTOUT."+      },+      {+        "number": "17",+        "name": "PA3",+        "type": "bidirectional",+        "description": "5V-tolerant I/O usable as USART2_RX, TIM2_CH4, TIM5_CH4, TIM9_CH2, ADC1_IN3 analog input, or EVENTOUT."+      },+      {+        "number": "18",+        "name": "VSS",+        "type": "power_in",+        "description": "Digital ground supply pin."+      },+      {+        "number": "19",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital power supply pin, standard operating voltage 1.7-3.6 V (1.8-3.6 V with the internal regulator enabled)."+      },+      {+        "number": "20",+        "name": "PA4",+        "type": "bidirectional",+        "description": "5V-tolerant I/O usable as SPI1_NSS, SPI3_NSS/I2S3_WS, USART2_CK, ADC1_IN4 analog input, or EVENTOUT."+      },+      {+        "number": "21",+        "name": "PA5",+        "type": "bidirectional",+        "description": "5V-tolerant I/O usable as SPI1_SCK, TIM2_CH1/TIM2_ETR, ADC1_IN5 analog input, or EVENTOUT."+      },+      {+        "number": "22",+        "name": "PA6",+        "type": "bidirectional",+        "description": "5V-tolerant I/O usable as SPI1_MISO, TIM1_BKIN, TIM3_CH1, ADC1_IN6 analog input, or EVENTOUT."+      },+      {+        "number": "23",+        "name": "PA7",+        "type": "bidirectional",+        "description": "5V-tolerant I/O usable as SPI1_MOSI, TIM1_CH1N, TIM3_CH2, ADC1_IN7 analog input, or EVENTOUT."+      },+      {+        "number": "24",+        "name": "PC4",+        "type": "bidirectional",+        "description": "5V-tolerant I/O usable as ADC1_IN14 analog input or EVENTOUT."+      },+      {+        "number": "25",+        "name": "PC5",+        "type": "bidirectional",+        "description": "5V-tolerant I/O usable as ADC1_IN15 analog input or EVENTOUT."+      },+      {+        "number": "26",+        "name": "PB0",+        "type": "bidirectional",+        "description": "5V-tolerant I/O usable as TIM1_CH2N, TIM3_CH3, ADC1_IN8 analog input, or EVENTOUT."+      },+      {+        "number": "27",+        "name": "PB1",+        "type": "bidirectional",+        "description": "5V-tolerant I/O usable as TIM1_CH3N, TIM3_CH4, ADC1_IN9 analog input, or EVENTOUT."+      },+      {+        "number": "28",+        "name": "PB2",+        "type": "bidirectional",+        "description": "5V-tolerant I/O usable as BOOT1, the second boot-mode select signal sampled together with BOOT0 at reset, or EVENTOUT."+      },+      {+        "number": "29",+        "name": "PB10",+        "type": "bidirectional",+        "description": "5V-tolerant I/O usable as SPI2_SCK/I2S2_CK, I2C2_SCL, TIM2_CH3, or EVENTOUT."+      },+      {+        "number": "30",+        "name": "VCAP_1",+        "type": "power_in",+        "description": "External regulator decoupling pin requiring a 2.2 µF ceramic capacitor (ESR < 2 Ω) to stabilize the 1.2 V internal logic supply (replaced by a 100 nF capacitor if the regulator is bypassed)."+      },+      {+        "number": "31",+        "name": "VSS",+        "type": "power_in",+        "description": "Digital ground supply pin."+      },+      {+        "number": "32",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital power supply pin, standard operating voltage 1.7-3.6 V (1.8-3.6 V with the internal regulator enabled)."+      },+      {+        "number": "33",+        "name": "PB12",+        "type": "bidirectional",+        "description": "5V-tolerant I/O usable as SPI2_NSS/I2S2_WS, I2C2_SMBA, TIM1_BKIN, or EVENTOUT."+      },+      {+        "number": "34",+        "name": "PB13",+        "type": "bidirectional",+        "description": "5V-tolerant I/O usable as SPI2_SCK/I2S2_CK, TIM1_CH1N, or EVENTOUT."+      },+      {+        "number": "35",+        "name": "PB14",+        "type": "bidirectional",+        "description": "5V-tolerant I/O usable as SPI2_MISO, I2S2ext_SD, TIM1_CH2N, or EVENTOUT."+      },+      {+        "number": "36",+        "name": "PB15",+        "type": "bidirectional",+        "description": "5V-tolerant I/O usable as SPI2_MOSI/I2S2_SD, TIM1_CH3N, RTC_REFIN reference clock input, or EVENTOUT."+      },+      {+        "number": "37",+        "name": "PC6",+        "type": "bidirectional",+        "description": "5V-tolerant I/O usable as I2S2_MCK, USART6_TX, TIM3_CH1, SDIO_D6, or EVENTOUT."+      },+      {+        "number": "38",+        "name": "PC7",+        "type": "bidirectional",+        "description": "5V-tolerant I/O usable as I2S3_MCK, USART6_RX, TIM3_CH2, SDIO_D7, or EVENTOUT."+      },+      {+        "number": "39",+        "name": "PC8",+        "type": "bidirectional",+        "description": "5V-tolerant I/O usable as USART6_CK, TIM3_CH3, SDIO_D0, or EVENTOUT."+      },+      {+        "number": "40",+        "name": "PC9",+        "type": "bidirectional",+        "description": "5V-tolerant I/O usable as I2S_CKIN, I2C3_SDA, TIM3_CH4, SDIO_D1, MCO_2 microcontroller clock output, or EVENTOUT."+      },+      {+        "number": "41",+        "name": "PA8",+        "type": "bidirectional",+        "description": "5V-tolerant I/O usable as MCO_1 microcontroller clock output, I2C3_SCL, USART1_CK, TIM1_CH1, OTG_FS_SOF, or EVENTOUT."+      },+      {+        "number": "42",+        "name": "PA9",+        "type": "bidirectional",+        "description": "5V-tolerant I/O usable as I2C3_SMBA, USART1_TX, TIM1_CH2, OTG_FS_VBUS sensing input, or EVENTOUT."+      },+      {+        "number": "43",+        "name": "PA10",+        "type": "bidirectional",+        "description": "5V-tolerant I/O usable as USART1_RX, TIM1_CH3, OTG_FS_ID, or EVENTOUT; this pin has a lower-value weak pull-up/pull-down (7-14 kΩ) associated with OTG_FS_ID."+      },+      {+        "number": "44",+        "name": "PA11",+        "type": "bidirectional",+        "description": "5V-tolerant I/O usable as USART1_CTS, USART6_TX, TIM1_CH4, OTG_FS_DM (USB D-), or EVENTOUT."+      },+      {+        "number": "45",+        "name": "PA12",+        "type": "bidirectional",+        "description": "5V-tolerant I/O usable as USART1_RTS, USART6_RX, TIM1_ETR, OTG_FS_DP (USB D+), or EVENTOUT."+      },+      {+        "number": "46",+        "name": "PA13 (JTMS-SWDIO)",+        "type": "bidirectional",+        "description": "5V-tolerant I/O whose default function is JTMS-SWDIO debug data/mode select, also selectable as EVENTOUT."+      },+      {+        "number": "47",+        "name": "VSS",+        "type": "power_in",+        "description": "Digital ground supply pin."+      },+      {+        "number": "48",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital power supply pin, standard operating voltage 1.7-3.6 V (1.8-3.6 V with the internal regulator enabled)."+      },+      {+        "number": "49",+        "name": "PA14 (JTCK-SWCLK)",+        "type": "bidirectional",+        "description": "5V-tolerant I/O whose default function is JTCK-SWCLK debug clock, also selectable as EVENTOUT."+      },+      {+        "number": "50",+        "name": "PA15 (JTDI)",+        "type": "bidirectional",+        "description": "5V-tolerant I/O whose default function is JTDI debug data input, also usable as SPI1_NSS, SPI3_NSS/I2S3_WS, TIM2_CH1/TIM2_ETR, or EVENTOUT."+      },+      {+        "number": "51",+        "name": "PC10",+        "type": "bidirectional",+        "description": "5V-tolerant I/O usable as SPI3_SCK/I2S3_CK, SDIO_D2, or EVENTOUT."+      },+      {+        "number": "52",+        "name": "PC11",+        "type": "bidirectional",+        "description": "5V-tolerant I/O usable as I2S3ext_SD, SPI3_MISO, SDIO_D3, or EVENTOUT."+      },+      {+        "number": "53",+        "name": "PC12",+        "type": "bidirectional",+        "description": "5V-tolerant I/O usable as SPI3_MOSI/I2S3_SD, SDIO_CK, or EVENTOUT."+      },+      {+        "number": "54",+        "name": "PD2",+        "type": "bidirectional",+        "description": "5V-tolerant I/O usable as TIM3_ETR, SDIO_CMD, or EVENTOUT."+      },+      {+        "number": "55",+        "name": "PB3 (JTDO-SWO)",+        "type": "bidirectional",+        "description": "5V-tolerant I/O whose default function is JTDO-SWO debug trace output, also usable as SPI1_SCK, SPI3_SCK/I2S3_CK, I2C2_SDA, TIM2_CH2, or EVENTOUT."+      },+      {+        "number": "56",+        "name": "PB4 (NJTRST)",+        "type": "bidirectional",+        "description": "5V-tolerant I/O whose default function is NJTRST debug reset, also usable as SPI1_MISO, SPI3_MISO, I2S3ext_SD, I2C3_SDA, TIM3_CH1, or EVENTOUT."+      },+      {+        "number": "57",+        "name": "PB5",+        "type": "bidirectional",+        "description": "5V-tolerant I/O usable as SPI1_MOSI, SPI3_MOSI/I2S3_SD, I2C1_SMBA, TIM3_CH2, or EVENTOUT."+      },+      {+        "number": "58",+        "name": "PB6",+        "type": "bidirectional",+        "description": "5V-tolerant I/O usable as I2C1_SCL, USART1_TX, TIM4_CH1, or EVENTOUT."+      },+      {+        "number": "59",+        "name": "PB7",+        "type": "bidirectional",+        "description": "5V-tolerant I/O usable as I2C1_SDA, USART1_RX, TIM4_CH2, or EVENTOUT."+      },+      {+        "number": "60",+        "name": "BOOT0",+        "type": "input",+        "description": "Dedicated boot-mode select input, together with BOOT1, sampled at reset to choose booting from user Flash, system memory or embedded SRAM; input voltage range 0-9 V and also used as the VPP high-voltage programming pin (min. 7 V, max 9 V, min. 10 mA sink)."+      },+      {+        "number": "61",+        "name": "PB8",+        "type": "bidirectional",+        "description": "5V-tolerant I/O usable as I2C1_SCL, TIM4_CH3, TIM10_CH1, SDIO_D4, or EVENTOUT."+      },+      {+        "number": "62",+        "name": "PB9",+        "type": "bidirectional",+        "description": "5V-tolerant I/O usable as SPI2_NSS/I2S2_WS, I2C1_SDA, TIM4_CH4, TIM11_CH1, SDIO_D5, or EVENTOUT."+      },+      {+        "number": "63",+        "name": "VSS",+        "type": "power_in",+        "description": "Digital ground supply pin."+      },+      {+        "number": "64",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital power supply pin, standard operating voltage 1.7-3.6 V (1.8-3.6 V with the internal regulator enabled)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: PA0 has special function in regulator OFF mode: acts as internal reset for V12 power domain and cann; PC13-PC15 have reduced drive capability (max 3mA, max 2MHz with 30pF load) due to power switch limit; PA10 has different pull-up/pull-down resistor values (7-14kΩ instead of standard 30-50kΩ) for OTG_FS"+        ],+        "pages_sent": 139,+        "cost_usd": 1.365,+        "at": "2026-09-23T17:34:03"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586178819862769664",+        "pages": 139,+        "sha256": "ea0100f21bbbb0da",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 64,+        "described": 64,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file