component
STM32F302RBT6
Public Made by Adomby adom
STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-64(10x10). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+98@@ -0,0 +1,98 @@+# STM32F302RBT6++**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · LQFP-64(10x10)++STM32F302RBT6 from STMicroelectronics, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VBAT | power_in | Backup power supply for RTC and backup registers, 1.65 to 3.6 V |+| 2 | PC14/OSC32_IN | input | GPIO Port C pin 14 or 32 kHz oscillator input |+| 3 | PC15/OSC32_OUT | output | GPIO Port C pin 15 or 32 kHz oscillator output |+| 5 | PF0/OSC_IN | input | GPIO Port F pin 0 or main oscillator input, 4-32 MHz |+| 6 | PF1/OSC_OUT | output | GPIO Port F pin 1 or main oscillator output |+| 7 | NRST | bidirectional | Active low reset pin with internal pull-up resistor and filtering |+| 8 | PC0 | input | GPIO Port C pin 0, can be used as ADC12_IN6 input |+| 9 | PC1 | input | GPIO Port C pin 1, can be used as ADC12_IN7 input |+| 10 | PC2 | input | GPIO Port C pin 2, can be used as ADC12_IN8 input |+| 11 | PC3 | input | GPIO Port C pin 3, can be used as ADC12_IN9 input or TIM1_BKIN2 |+| 12 | VSSA/VREF- | power_in | Analog ground and negative reference voltage for ADC |+| 13 | VDDA | power_in | Analog power supply, 2.0 to 3.6 V, must be >= VDD |+| 14 | PA0 | bidirectional | GPIO Port A pin 0, can be used as ADC1_IN1, USART2_CTS, or TIM2_CH1_ETR |+| 15 | PA1 | bidirectional | GPIO Port A pin 1, can be used as ADC1_IN2, USART2_RTS_DE, or TIM15_CH1N |+| 16 | PA2 | bidirectional | GPIO Port A pin 2, can be used as ADC1_IN3, USART2_TX, or TIM15_CH1 |+| 18 | VDD | power_in | Digital power supply, 2.0 to 3.6 V |+| 19 | PF4 | input | GPIO Port F pin 4, can be used as ADC1_IN5 or COMP1_OUT |+| 20 | PA5 | bidirectional | GPIO Port A pin 5, can be used as ADC2_IN2, SPI1_SCK, or TIM2_CH1_ETR |+| 21 | PA6 | bidirectional | GPIO Port A pin 6, can be used as ADC2_IN3, SPI1_MISO, TIM3_CH1, or TIM1_BKIN |+| 22 | PA7 | bidirectional | GPIO Port A pin 7, can be used as ADC2_IN4, SPI1_MOSI, TIM3_CH2, or TIM1_CH1N |+| 23 | PC4 | input | GPIO Port C pin 4, can be used as ADC2_IN5 or USART1_TX |+| 24 | PC5 | input | GPIO Port C pin 5, can be used as ADC2_IN11, USART1_RX, or touch sensing |+| 25 | PB0 | bidirectional | GPIO Port B pin 0, can be used as TIM3_CH3, TIM1_CH2N, or touch sensing |+| 26 | PB1 | bidirectional | GPIO Port B pin 1, can be used as TIM3_CH4, TIM1_CH3N, or COMP4_OUT |+| 27 | PB2 | bidirectional | GPIO Port B pin 2, can be used as ADC2_IN12, COMP4_INM, or touch sensing |+| 28 | PB10 | bidirectional | GPIO Port B pin 10, can be used as USART3_TX or TIM2_CH3 |+| 29 | PB11 | bidirectional | GPIO Port B pin 11, can be used as USART3_RX or TIM2_CH4 |+| 30 | VSS | power_in | Digital ground |+| 31 | VDD | power_in | Digital power supply, 2.0 to 3.6 V |+| 32 | PB12 | bidirectional | GPIO Port B pin 12, can be used as SPI2_NSS, I2S2_WS, USART3_CK, or TIM1_BKIN |+| 33 | PB13 | bidirectional | GPIO Port B pin 13, can be used as SPI2_SCK, I2S2_CK, USART3_CTS, or TIM1_CH1N |+| 34 | PB14 | bidirectional | GPIO Port B pin 14, can be used as SPI2_MISO, USART3_RTS_DE, or TIM1_CH2N |+| 35 | PB15 | bidirectional | GPIO Port B pin 15, can be used as SPI2_MOSI, I2S2_SD, TIM1_CH3N, or TIM15_CH1N |+| 36 | PC6 | bidirectional | GPIO Port C pin 6, can be used as TIM3_CH1, I2S2_MCK, or COMP6_OUT |+| 37 | PC7 | bidirectional | GPIO Port C pin 7, can be used as TIM3_CH2, I2S3_MCK |+| 38 | PC8 | bidirectional | GPIO Port C pin 8, can be used as TIM3_CH3 |+| 39 | PC9 | bidirectional | GPIO Port C pin 9, can be used as TIM3_CH4 or I2S_CKIN |+| 40 | PA8 | bidirectional | GPIO Port A pin 8, can be used as TIM1_CH1, MCO, USART1_CK, or I2C2_SMBA |+| 41 | PA9 | bidirectional | GPIO Port A pin 9, can be used as USART1_TX, TIM1_CH2, or I2C2_SCL |+| 42 | PA10 | bidirectional | GPIO Port A pin 10, can be used as USART1_RX, TIM1_CH3, or I2C2_SDA |+| 43 | PA11 | bidirectional | GPIO Port A pin 11, can be used as USB_DM, USART1_CTS, CAN_RX, TIM1_CH1N, or COMP1_OUT |+| 44 | PA12 | bidirectional | GPIO Port A pin 12, can be used as USB_DP, USART1_RTS_DE, CAN_TX, TIM1_CH2N, or COMP2_OUT |+| 45 | PA13 | bidirectional | GPIO Port A pin 13, SWDIO/JTMS, can be used as USART3_CTS, TIM16_CH1N, or IR_OUT |+| 46 | PA14 | bidirectional | GPIO Port A pin 14, SWCLK/JTCK, can be used as USART2_TX, I2C1_SDA, or TIM1_BKIN |+| 47 | PA15 | bidirectional | GPIO Port A pin 15, JTDI, can be used as USART2_RX, SPI1_NSS, I2C1_SCL, or TIM1_BKIN |+| 48 | VSS | power_in | Digital ground |+| 49 | VDD | power_in | Digital power supply, 2.0 to 3.6 V |+| 50 | PB3 | bidirectional | GPIO Port B pin 3, JTDO/TRACESWO, can be used as SPI1_SCK, USART2_TX, or TIM2_CH2 |+| 51 | PB4 | bidirectional | GPIO Port B pin 4, NJTRST, can be used as SPI1_MISO, USART2_RX, TIM3_CH1, or TIM16_CH1 |+| 52 | PB5 | bidirectional | GPIO Port B pin 5, can be used as SPI1_MOSI, I2C1_SMBA, USART2_CK, or TIM17_CH1 |+| 53 | PB6 | bidirectional | GPIO Port B pin 6, can be used as USART1_TX, I2C1_SCL, TIM16_CH1N, or TIM4_CH1 |+| 54 | PB7 | bidirectional | GPIO Port B pin 7, can be used as USART1_RX, I2C1_SDA, TIM17_CH1N, or TIM4_CH2 |+| 55 | PB8 | bidirectional | GPIO Port B pin 8, can be used as CAN_RX, TIM16_CH1, TIM1_BKIN, or COMP1_OUT |+| 56 | PB9 | bidirectional | GPIO Port B pin 9, can be used as CAN_TX, TIM17_CH1, IR_OUT, or COMP2_OUT |+| 57 | PC10 | bidirectional | GPIO Port C pin 10, can be used as SPI3_SCK, I2S3_CK, USART3_TX, or UART4_TX |+| 58 | PC11 | bidirectional | GPIO Port C pin 11, can be used as SPI3_MISO, USART3_RX, or UART4_RX |+| 59 | PC12 | bidirectional | GPIO Port C pin 12, can be used as SPI3_MOSI, I2S3_SD, USART3_CK, or UART5_TX |+| 60 | PD2 | bidirectional | GPIO Port D pin 2, can be used as UART5_RX or TIM3_ETR |+| 61 | VSS | power_in | Digital ground |+| 62 | VDD | power_in | Digital power supply, 2.0 to 3.6 V |+| 63 | BOOT0 | input | Boot mode pin, 0-5.5 V, selects boot source at device startup |+| 64 | VDD | power_in | Digital power supply, 2.0 to 3.6 V |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | LQFP-64(10x10) |+| Category | Embedded Processors & Controllers |+| Pins | 64 |++## CAD (KiCad official)++- Symbol: `STM32F302RBT6`+- Footprint: `Package_QFP:LQFP-64_10x10mm_P0.5mm`+- 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)+- 3D model files: `stm32f302rbt6-etched.step` / `stm32f302rbt6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32f302rbt6.step` / `stm32f302rbt6.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588893054816702464) (145 pp, sha256 `10a072d58aca58c4`, retrieved 2026-09-29, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm32f302rbt6-datasheet.pdf)
page.jsonadded+466@@ -0,0 +1,466 @@+{+ "slug": "stm32f302rbt6",+ "version": "0.1.0",+ "type": "component",+ "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-64(10x10). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "embedded processors & controllers",+ "stm32f302rbt6",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "stm32f302rbt6.kicad_sym",+ "stm32f302rbt6.kicad_mod",+ "stm32f302rbt6.glb",+ "stm32f302rbt6.step",+ "stm32f302rbt6.lbr",+ "docs/hero.png",+ "docs/stm32f302rbt6-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "STM32F302RBT6",+ "manufacturer": "STMicroelectronics",+ "package": "LQFP-64(10x10)",+ "pin_count": 62,+ "category": "Embedded Processors & Controllers",+ "subcategory": "Microcontrollers (MCU/MPU/SOC)",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588893054816702464",+ "parts": {+ "symbol": "stm32f302rbt6.kicad_sym",+ "footprint": "stm32f302rbt6.kicad_mod",+ "model_3d": "stm32f302rbt6-etched.glb",+ "model_3d_plain": "stm32f302rbt6.glb",+ "model_3d_step": "stm32f302rbt6-etched.step",+ "model_3d_step_plain": "stm32f302rbt6.step",+ "lbr": "stm32f302rbt6.lbr"+ },+ "distributor_links": {+ "lcsc": "C915559",+ "digikey": "497-17416-ND",+ "mouser": "511-STM32F302RBT6"+ },+ "distributor_check": {+ "checked_at": "2026-09-29T14:26:20Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "497-17416-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "511-STM32F302RBT6",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "VBAT",+ "type": "power_in",+ "description": "Backup power supply for RTC and backup registers, 1.65 to 3.6 V"+ },+ {+ "number": "2",+ "name": "PC14/OSC32_IN",+ "type": "input",+ "description": "GPIO Port C pin 14 or 32 kHz oscillator input"+ },+ {+ "number": "3",+ "name": "PC15/OSC32_OUT",+ "type": "output",+ "description": "GPIO Port C pin 15 or 32 kHz oscillator output"+ },+ {+ "number": "5",+ "name": "PF0/OSC_IN",+ "type": "input",+ "description": "GPIO Port F pin 0 or main oscillator input, 4-32 MHz"+ },+ {+ "number": "6",+ "name": "PF1/OSC_OUT",+ "type": "output",+ "description": "GPIO Port F pin 1 or main oscillator output"+ },+ {+ "number": "7",+ "name": "NRST",+ "type": "bidirectional",+ "description": "Active low reset pin with internal pull-up resistor and filtering"+ },+ {+ "number": "8",+ "name": "PC0",+ "type": "input",+ "description": "GPIO Port C pin 0, can be used as ADC12_IN6 input"+ },+ {+ "number": "9",+ "name": "PC1",+ "type": "input",+ "description": "GPIO Port C pin 1, can be used as ADC12_IN7 input"+ },+ {+ "number": "10",+ "name": "PC2",+ "type": "input",+ "description": "GPIO Port C pin 2, can be used as ADC12_IN8 input"+ },+ {+ "number": "11",+ "name": "PC3",+ "type": "input",+ "description": "GPIO Port C pin 3, can be used as ADC12_IN9 input or TIM1_BKIN2"+ },+ {+ "number": "12",+ "name": "VSSA/VREF-",+ "type": "power_in",+ "description": "Analog ground and negative reference voltage for ADC"+ },+ {+ "number": "13",+ "name": "VDDA",+ "type": "power_in",+ "description": "Analog power supply, 2.0 to 3.6 V, must be >= VDD"+ },+ {+ "number": "14",+ "name": "PA0",+ "type": "bidirectional",+ "description": "GPIO Port A pin 0, can be used as ADC1_IN1, USART2_CTS, or TIM2_CH1_ETR"+ },+ {+ "number": "15",+ "name": "PA1",+ "type": "bidirectional",+ "description": "GPIO Port A pin 1, can be used as ADC1_IN2, USART2_RTS_DE, or TIM15_CH1N"+ },+ {+ "number": "16",+ "name": "PA2",+ "type": "bidirectional",+ "description": "GPIO Port A pin 2, can be used as ADC1_IN3, USART2_TX, or TIM15_CH1"+ },+ {+ "number": "18",+ "name": "VDD",+ "type": "power_in",+ "description": "Digital power supply, 2.0 to 3.6 V"+ },+ {+ "number": "19",+ "name": "PF4",+ "type": "input",+ "description": "GPIO Port F pin 4, can be used as ADC1_IN5 or COMP1_OUT"+ },+ {+ "number": "20",+ "name": "PA5",+ "type": "bidirectional",+ "description": "GPIO Port A pin 5, can be used as ADC2_IN2, SPI1_SCK, or TIM2_CH1_ETR"+ },+ {+ "number": "21",+ "name": "PA6",+ "type": "bidirectional",+ "description": "GPIO Port A pin 6, can be used as ADC2_IN3, SPI1_MISO, TIM3_CH1, or TIM1_BKIN"+ },+ {+ "number": "22",+ "name": "PA7",+ "type": "bidirectional",+ "description": "GPIO Port A pin 7, can be used as ADC2_IN4, SPI1_MOSI, TIM3_CH2, or TIM1_CH1N"+ },+ {+ "number": "23",+ "name": "PC4",+ "type": "input",+ "description": "GPIO Port C pin 4, can be used as ADC2_IN5 or USART1_TX"+ },+ {+ "number": "24",+ "name": "PC5",+ "type": "input",+ "description": "GPIO Port C pin 5, can be used as ADC2_IN11, USART1_RX, or touch sensing"+ },+ {+ "number": "25",+ "name": "PB0",+ "type": "bidirectional",+ "description": "GPIO Port B pin 0, can be used as TIM3_CH3, TIM1_CH2N, or touch sensing"+ },+ {+ "number": "26",+ "name": "PB1",+ "type": "bidirectional",+ "description": "GPIO Port B pin 1, can be used as TIM3_CH4, TIM1_CH3N, or COMP4_OUT"+ },+ {+ "number": "27",+ "name": "PB2",+ "type": "bidirectional",+ "description": "GPIO Port B pin 2, can be used as ADC2_IN12, COMP4_INM, or touch sensing"+ },+ {+ "number": "28",+ "name": "PB10",+ "type": "bidirectional",+ "description": "GPIO Port B pin 10, can be used as USART3_TX or TIM2_CH3"+ },+ {+ "number": "29",+ "name": "PB11",+ "type": "bidirectional",+ "description": "GPIO Port B pin 11, can be used as USART3_RX or TIM2_CH4"+ },+ {+ "number": "30",+ "name": "VSS",+ "type": "power_in",+ "description": "Digital ground"+ },+ {+ "number": "31",+ "name": "VDD",+ "type": "power_in",+ "description": "Digital power supply, 2.0 to 3.6 V"+ },+ {+ "number": "32",+ "name": "PB12",+ "type": "bidirectional",+ "description": "GPIO Port B pin 12, can be used as SPI2_NSS, I2S2_WS, USART3_CK, or TIM1_BKIN"+ },+ {+ "number": "33",+ "name": "PB13",+ "type": "bidirectional",+ "description": "GPIO Port B pin 13, can be used as SPI2_SCK, I2S2_CK, USART3_CTS, or TIM1_CH1N"+ },+ {+ "number": "34",+ "name": "PB14",+ "type": "bidirectional",+ "description": "GPIO Port B pin 14, can be used as SPI2_MISO, USART3_RTS_DE, or TIM1_CH2N"+ },+ {+ "number": "35",+ "name": "PB15",+ "type": "bidirectional",+ "description": "GPIO Port B pin 15, can be used as SPI2_MOSI, I2S2_SD, TIM1_CH3N, or TIM15_CH1N"+ },+ {+ "number": "36",+ "name": "PC6",+ "type": "bidirectional",+ "description": "GPIO Port C pin 6, can be used as TIM3_CH1, I2S2_MCK, or COMP6_OUT"+ },+ {+ "number": "37",+ "name": "PC7",+ "type": "bidirectional",+ "description": "GPIO Port C pin 7, can be used as TIM3_CH2, I2S3_MCK"+ },+ {+ "number": "38",+ "name": "PC8",+ "type": "bidirectional",+ "description": "GPIO Port C pin 8, can be used as TIM3_CH3"+ },+ {+ "number": "39",+ "name": "PC9",+ "type": "bidirectional",+ "description": "GPIO Port C pin 9, can be used as TIM3_CH4 or I2S_CKIN"+ },+ {+ "number": "40",+ "name": "PA8",+ "type": "bidirectional",+ "description": "GPIO Port A pin 8, can be used as TIM1_CH1, MCO, USART1_CK, or I2C2_SMBA"+ },+ {+ "number": "41",+ "name": "PA9",+ "type": "bidirectional",+ "description": "GPIO Port A pin 9, can be used as USART1_TX, TIM1_CH2, or I2C2_SCL"+ },+ {+ "number": "42",+ "name": "PA10",+ "type": "bidirectional",+ "description": "GPIO Port A pin 10, can be used as USART1_RX, TIM1_CH3, or I2C2_SDA"+ },+ {+ "number": "43",+ "name": "PA11",+ "type": "bidirectional",+ "description": "GPIO Port A pin 11, can be used as USB_DM, USART1_CTS, CAN_RX, TIM1_CH1N, or COMP1_OUT"+ },+ {+ "number": "44",+ "name": "PA12",+ "type": "bidirectional",+ "description": "GPIO Port A pin 12, can be used as USB_DP, USART1_RTS_DE, CAN_TX, TIM1_CH2N, or COMP2_OUT"+ },+ {+ "number": "45",+ "name": "PA13",+ "type": "bidirectional",+ "description": "GPIO Port A pin 13, SWDIO/JTMS, can be used as USART3_CTS, TIM16_CH1N, or IR_OUT"+ },+ {+ "number": "46",+ "name": "PA14",+ "type": "bidirectional",+ "description": "GPIO Port A pin 14, SWCLK/JTCK, can be used as USART2_TX, I2C1_SDA, or TIM1_BKIN"+ },+ {+ "number": "47",+ "name": "PA15",+ "type": "bidirectional",+ "description": "GPIO Port A pin 15, JTDI, can be used as USART2_RX, SPI1_NSS, I2C1_SCL, or TIM1_BKIN"+ },+ {+ "number": "48",+ "name": "VSS",+ "type": "power_in",+ "description": "Digital ground"+ },+ {+ "number": "49",+ "name": "VDD",+ "type": "power_in",+ "description": "Digital power supply, 2.0 to 3.6 V"+ },+ {+ "number": "50",+ "name": "PB3",+ "type": "bidirectional",+ "description": "GPIO Port B pin 3, JTDO/TRACESWO, can be used as SPI1_SCK, USART2_TX, or TIM2_CH2"+ },+ {+ "number": "51",+ "name": "PB4",+ "type": "bidirectional",+ "description": "GPIO Port B pin 4, NJTRST, can be used as SPI1_MISO, USART2_RX, TIM3_CH1, or TIM16_CH1"+ },+ {+ "number": "52",+ "name": "PB5",+ "type": "bidirectional",+ "description": "GPIO Port B pin 5, can be used as SPI1_MOSI, I2C1_SMBA, USART2_CK, or TIM17_CH1"+ },+ {+ "number": "53",+ "name": "PB6",+ "type": "bidirectional",+ "description": "GPIO Port B pin 6, can be used as USART1_TX, I2C1_SCL, TIM16_CH1N, or TIM4_CH1"+ },+ {+ "number": "54",+ "name": "PB7",+ "type": "bidirectional",+ "description": "GPIO Port B pin 7, can be used as USART1_RX, I2C1_SDA, TIM17_CH1N, or TIM4_CH2"+ },+ {+ "number": "55",+ "name": "PB8",+ "type": "bidirectional",+ "description": "GPIO Port B pin 8, can be used as CAN_RX, TIM16_CH1, TIM1_BKIN, or COMP1_OUT"+ },+ {+ "number": "56",+ "name": "PB9",+ "type": "bidirectional",+ "description": "GPIO Port B pin 9, can be used as CAN_TX, TIM17_CH1, IR_OUT, or COMP2_OUT"+ },+ {+ "number": "57",+ "name": "PC10",+ "type": "bidirectional",+ "description": "GPIO Port C pin 10, can be used as SPI3_SCK, I2S3_CK, USART3_TX, or UART4_TX"+ },+ {+ "number": "58",+ "name": "PC11",+ "type": "bidirectional",+ "description": "GPIO Port C pin 11, can be used as SPI3_MISO, USART3_RX, or UART4_RX"+ },+ {+ "number": "59",+ "name": "PC12",+ "type": "bidirectional",+ "description": "GPIO Port C pin 12, can be used as SPI3_MOSI, I2S3_SD, USART3_CK, or UART5_TX"+ },+ {+ "number": "60",+ "name": "PD2",+ "type": "bidirectional",+ "description": "GPIO Port D pin 2, can be used as UART5_RX or TIM3_ETR"+ },+ {+ "number": "61",+ "name": "VSS",+ "type": "power_in",+ "description": "Digital ground"+ },+ {+ "number": "62",+ "name": "VDD",+ "type": "power_in",+ "description": "Digital power supply, 2.0 to 3.6 V"+ },+ {+ "number": "63",+ "name": "BOOT0",+ "type": "input",+ "description": "Boot mode pin, 0-5.5 V, selects boot source at device startup"+ },+ {+ "number": "64",+ "name": "VDD",+ "type": "power_in",+ "description": "Digital power supply, 2.0 to 3.6 V"+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588893054816702464",+ "pages": 145,+ "sha256": "10a072d58aca58c4",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 62,+ "described": 62,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}