← Commit history

Initial commit: component/stm32f302cct6

Ray ·ee653143cf ·
2 files changed +467
README.mdadded+84
@@ -0,0 +1,84 @@+# STM32F302CCT6++**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · LQFP-48(7x7)++STM32F302CCT6 from STMicroelectronics, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VBAT | power_in | Backup power supply pin for RTC and backup registers, voltage range 1.65 V to 3.6 V. |+| 2 | PC13 | bidirectional | GPIO port C pin 13 (3.3V tolerant standard I/O), alternate functions include TIM1_CH1N and RTC functions (WKUP2, RTC_TAMP1, RTC_TS, RTC_OUT). |+| 3 | PC14/OSC32_IN | input | GPIO port C pin 14 (3.3V tolerant standard I/O), used as OSC32_IN for 32.768 kHz crystal oscillator input. |+| 4 | PC15/OSC32_OUT | output | GPIO port C pin 15 (3.3V tolerant standard I/O), used as OSC32_OUT for 32.768 kHz crystal oscillator output. |+| 5 | PF0/OSC_IN | input | GPIO port F pin 0 (5V tolerant, FM+ capable I/O), used as OSC_IN for 4-32 MHz crystal oscillator input. |+| 6 | PF1/OSC_OUT | output | GPIO port F pin 1 (5V tolerant, FM+ capable I/O), used as OSC_OUT for 4-32 MHz crystal oscillator output. |+| 7 | NRST | input | Device reset input pin with embedded weak pull-up resistor, active low, can be used as input or output. |+| 8 | VSSA/VREF- | power_in | Analog ground and negative reference voltage for ADC/DAC, must be connected to VSS. |+| 9 | VDDA/VREF+ | power_in | Analog power supply and positive reference voltage for ADC/DAC, voltage range 2.0 V to 3.6 V, must power on before or equal to VDD. |+| 10 | PA0 | bidirectional | GPIO port A pin 0 (3.3V tolerant, ADC capable), alternate functions include USART2_CTS, TIM2_CH1_ETR, TSC_G1_IO1, COMP1_OUT, ADC1_IN1. |+| 11 | PA1 | bidirectional | GPIO port A pin 1 (3.3V tolerant, ADC capable), alternate functions include USART2_RTS_DE, TIM2_CH2, TSC_G1_IO2, TIM15_CH1N, ADC1_IN2. |+| 12 | PA2 | bidirectional | GPIO port A pin 2 (3.3V tolerant, ADC capable), alternate functions include USART2_TX, TIM2_CH3, TIM15_CH1, TSC_G1_IO3, COMP2_OUT, ADC1_IN3. |+| 13 | PA3 | bidirectional | GPIO port A pin 3 (3.3V tolerant, ADC capable), alternate functions include USART2_RX, TIM2_CH4, TIM15_CH2, TSC_G1_IO4, ADC1_IN4. |+| 14 | PA4 | bidirectional | GPIO port A pin 4 (3.3V tolerant, ADC capable), alternate functions include SPI1_NSS, SPI3_NSS, USART2_CK, TSC_G2_IO1, TIM3_CH2, ADC2_IN1, DAC1_OUT1. |+| 15 | PA5 | bidirectional | GPIO port A pin 5 (3.3V tolerant, ADC capable), alternate functions include SPI1_SCK, TIM2_CH1_ETR, TSC_G2_IO2, ADC2_IN2. |+| 16 | PA6 | bidirectional | GPIO port A pin 6 (3.3V tolerant, ADC capable), alternate functions include SPI1_MISO, TIM3_CH1, TIM1_BKIN, TIM16_CH1, COMP1_OUT, TSC_G2_IO3, ADC2_IN3. |+| 17 | PA7 | bidirectional | GPIO port A pin 7 (3.3V tolerant, ADC capable), alternate functions include SPI1_MOSI, TIM3_CH2, TIM17_CH1, TIM1_CH1N, TSC_G2_IO4, COMP2_OUT, ADC2_IN4. |+| 18 | PB0 | bidirectional | GPIO port B pin 0 (3.3V tolerant, ADC capable), alternate functions include TIM3_CH3, TIM1_CH2N, TSC_G3_IO2, COMP4_INP. |+| 19 | PB1 | bidirectional | GPIO port B pin 1 (3.3V tolerant, ADC capable), alternate functions include TIM3_CH4, TIM1_CH3N, COMP4_OUT, TSC_G3_IO3. |+| 20 | PB2 | bidirectional | GPIO port B pin 2 (3.3V tolerant, ADC capable), alternate functions include TSC_G3_IO4, ADC2_IN12, COMP4_INM. |+| 21 | PB10 | bidirectional | GPIO port B pin 10 (3.3V tolerant I/O), alternate functions include USART3_TX, TIM2_CH3, TSC_SYNC. |+| 22 | PB11 | bidirectional | GPIO port B pin 11 (3.3V tolerant I/O), alternate functions include USART3_RX, TIM2_CH4, TSC_G6_IO1, COMP6_INP. |+| 23 | VSS | power_in | Digital ground pin, must be connected to external ground and decoupled with filtering capacitors. |+| 24 | VDD | power_in | Digital power supply pin, voltage range 2.0 V to 3.6 V, must be decoupled with filtering capacitors. |+| 25 | PB12 | bidirectional | GPIO port B pin 12 (5V tolerant I/O), alternate functions include SPI2_NSS, I2S2_WS, I2C2_SMBA, USART3_CK, TIM1_BKIN, TSC_G6_IO2. |+| 26 | PB13 | bidirectional | GPIO port B pin 13 (5V tolerant I/O), alternate functions include SPI2_SCK, I2S2_CK, USART3_CTS, TIM1_CH1N, TSC_G6_IO3. |+| 27 | PB14 | bidirectional | GPIO port B pin 14 (5V tolerant I/O), alternate functions include SPI2_MISO, I2S2ext_SD, USART3_RTS_DE, TIM1_CH2N, TIM15_CH1, TSC_G6_IO4. |+| 28 | PB15 | bidirectional | GPIO port B pin 15 (5V tolerant I/O), alternate functions include SPI2_MOSI, I2S2_SD, TIM1_CH3N, RTC_REFIN, TIM15_CH1N, TIM15_CH2, COMP6_INM. |+| 29 | PA8 | bidirectional | GPIO port A pin 8 (5V tolerant I/O), alternate functions include I2C2_SMBA, I2S2_MCK, USART1_CK, TIM1_CH1, TIM4_ETR, MCO. |+| 30 | PA9 | bidirectional | GPIO port A pin 9 (5V tolerant, FM+ capable I/O), alternate functions include I2C2_SCL, I2S3_MCK, USART1_TX, TIM1_CH2, TIM2_CH3, TIM15_BKIN, TSC_G4_IO1. |+| 31 | PA10 | bidirectional | GPIO port A pin 10 (5V tolerant, FM+ capable I/O), alternate functions include I2C2_SDA, USART1_RX, TIM1_CH3, TIM2_CH4, TIM17_BKIN, TSC_G4_IO2, COMP6_OUT. |+| 32 | PA11 | bidirectional | GPIO port A pin 11 (5V tolerant I/O), alternate functions include USART1_CTS, USB_DM, CAN_RX, TIM1_CH1N, TIM1_CH4, TIM1_BKIN2, TIM4_CH1, COMP1_OUT. |+| 33 | PA12 | bidirectional | GPIO port A pin 12 (5V tolerant I/O), alternate functions include USART1_RTS_DE, USB_DP, CAN_TX, TIM1_CH2N, TIM1_ETR, TIM4_CH2, TIM16_CH1, COMP2_OUT. |+| 34 | PA13 | bidirectional | GPIO port A pin 13 (5V tolerant I/O), alternate functions include USART3_CTS, TIM4_CH3, TIM16_CH1N, TSC_G4_IO3, IR_OUT, SWDIO-JTMS for debug. |+| 35 | VSS | power_in | Digital ground pin, must be connected to external ground and decoupled with filtering capacitors. |+| 36 | VDD | power_in | Digital power supply pin, voltage range 2.0 V to 3.6 V, must be decoupled with filtering capacitors. |+| 37 | PA14 | bidirectional | GPIO port A pin 14 (5V tolerant, FM+ capable I/O), alternate functions include I2C1_SDA, USART2_TX, TIM1_BKIN, TSC_G4_IO4, SWCLK-JTCK for debug. |+| 38 | PA15 | bidirectional | GPIO port A pin 15 (5V tolerant, FM+ capable I/O), alternate functions include I2C1_SCL, SPI1_NSS, SPI3_NSS, I2S3_WS, JTDI, USART2_RX, TIM1_BKIN, TIM2_CH1_ETR. |+| 39 | PB3 | bidirectional | GPIO port B pin 3 (5V tolerant I/O), alternate functions include SPI3_SCK, I2S3_CK, SPI1_SCK, USART2_TX, TIM2_CH2, TIM3_ETR, TIM4_ETR, TSC_G5_IO1, JTDO-TRACESWO. |+| 40 | PB4 | bidirectional | GPIO port B pin 4 (5V tolerant I/O), alternate functions include SPI3_MISO, I2S3ext_SD, SPI1_MISO, USART2_RX, TIM3_CH1, TIM16_CH1, TIM17_BKIN, TSC_G5_IO2, NJTRST. |+| 41 | PB5 | bidirectional | GPIO port B pin 5 (5V tolerant I/O), alternate functions include SPI3_MOSI, SPI1_MOSI, I2S3_SD, I2C1_SMBA, USART2_CK, TIM16_BKIN, TIM3_CH2, TIM17_CH1. |+| 42 | PB6 | bidirectional | GPIO port B pin 6 (5V tolerant, FM+ capable I/O), alternate functions include I2C1_SCL, USART1_TX, TIM16_CH1N, TIM4_CH1, TSC_G5_IO3. |+| 43 | PB7 | bidirectional | GPIO port B pin 7 (5V tolerant, FM+ capable I/O), alternate functions include I2C1_SDA, USART1_RX, TIM3_CH4, TIM4_CH2, TIM17_CH1N, TSC_G5_IO4. |+| 44 | BOOT0 | input | Boot memory selection pin, determines boot mode (user Flash, system memory, or SRAM) at device startup, voltage range 0 V to 5.5 V. |+| 45 | PB8 | bidirectional | GPIO port B pin 8 (5V tolerant, FM+ capable I/O), alternate functions include I2C1_SCL, CAN_RX, TIM16_CH1, TIM4_CH3, TIM1_BKIN, TSC_SYNC, COMP1_OUT. |+| 46 | PB9 | bidirectional | GPIO port B pin 9 (5V tolerant, FM+ capable I/O), alternate functions include I2C1_SDA, CAN_TX, TIM17_CH1, TIM4_CH4, IR_OUT, COMP2_OUT. |+| 47 | VSS | power_in | Digital ground pin, must be connected to external ground and decoupled with filtering capacitors. |+| 48 | VDD | power_in | Digital power supply pin, voltage range 2.0 V to 3.6 V, must be decoupled with filtering capacitors. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | LQFP-48(7x7) |+| Category | Embedded Processors & Controllers |+| Pins | 48 |++## CAD (KiCad official)++- Symbol: `STM32F302CCT6`+- Footprint: `Package_QFP:LQFP-48_7x7mm_P0.5mm`+- 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)+- 3D model files: `stm32f302cct6-etched.step` / `stm32f302cct6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32f302cct6.step` / `stm32f302cct6.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590910170236985344) (145 pp, sha256 `10a072d58aca58c4`, retrieved 2026-09-24, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm32f302cct6-datasheet.pdf)
page.jsonadded+383
@@ -0,0 +1,383 @@+{+  "slug": "stm32f302cct6",+  "version": "0.1.0",+  "type": "component",+  "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-48(7x7). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "embedded processors & controllers",+    "stm32f302cct6",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "stm32f302cct6.kicad_sym",+    "stm32f302cct6.kicad_mod",+    "stm32f302cct6.glb",+    "stm32f302cct6.step",+    "stm32f302cct6.lbr",+    "docs/hero.png",+    "docs/stm32f302cct6-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "STM32F302CCT6",+    "manufacturer": "STMicroelectronics",+    "package": "LQFP-48(7x7)",+    "pin_count": 48,+    "category": "Embedded Processors & Controllers",+    "subcategory": "Microcontrollers (MCU/MPU/SOC)",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590910170236985344",+    "parts": {+      "symbol": "stm32f302cct6.kicad_sym",+      "footprint": "stm32f302cct6.kicad_mod",+      "model_3d": "stm32f302cct6-etched.glb",+      "model_3d_plain": "stm32f302cct6.glb",+      "model_3d_step": "stm32f302cct6-etched.step",+      "model_3d_step_plain": "stm32f302cct6.step",+      "lbr": "stm32f302cct6.lbr"+    },+    "distributor_links": {+      "lcsc": "C262946"+    },+    "pins": [+      {+        "number": "1",+        "name": "VBAT",+        "type": "power_in",+        "description": "Backup power supply pin for RTC and backup registers, voltage range 1.65 V to 3.6 V."+      },+      {+        "number": "2",+        "name": "PC13",+        "type": "bidirectional",+        "description": "GPIO port C pin 13 (3.3V tolerant standard I/O), alternate functions include TIM1_CH1N and RTC functions (WKUP2, RTC_TAMP1, RTC_TS, RTC_OUT)."+      },+      {+        "number": "3",+        "name": "PC14/OSC32_IN",+        "type": "input",+        "description": "GPIO port C pin 14 (3.3V tolerant standard I/O), used as OSC32_IN for 32.768 kHz crystal oscillator input."+      },+      {+        "number": "4",+        "name": "PC15/OSC32_OUT",+        "type": "output",+        "description": "GPIO port C pin 15 (3.3V tolerant standard I/O), used as OSC32_OUT for 32.768 kHz crystal oscillator output."+      },+      {+        "number": "5",+        "name": "PF0/OSC_IN",+        "type": "input",+        "description": "GPIO port F pin 0 (5V tolerant, FM+ capable I/O), used as OSC_IN for 4-32 MHz crystal oscillator input."+      },+      {+        "number": "6",+        "name": "PF1/OSC_OUT",+        "type": "output",+        "description": "GPIO port F pin 1 (5V tolerant, FM+ capable I/O), used as OSC_OUT for 4-32 MHz crystal oscillator output."+      },+      {+        "number": "7",+        "name": "NRST",+        "type": "input",+        "description": "Device reset input pin with embedded weak pull-up resistor, active low, can be used as input or output."+      },+      {+        "number": "8",+        "name": "VSSA/VREF-",+        "type": "power_in",+        "description": "Analog ground and negative reference voltage for ADC/DAC, must be connected to VSS."+      },+      {+        "number": "9",+        "name": "VDDA/VREF+",+        "type": "power_in",+        "description": "Analog power supply and positive reference voltage for ADC/DAC, voltage range 2.0 V to 3.6 V, must power on before or equal to VDD."+      },+      {+        "number": "10",+        "name": "PA0",+        "type": "bidirectional",+        "description": "GPIO port A pin 0 (3.3V tolerant, ADC capable), alternate functions include USART2_CTS, TIM2_CH1_ETR, TSC_G1_IO1, COMP1_OUT, ADC1_IN1."+      },+      {+        "number": "11",+        "name": "PA1",+        "type": "bidirectional",+        "description": "GPIO port A pin 1 (3.3V tolerant, ADC capable), alternate functions include USART2_RTS_DE, TIM2_CH2, TSC_G1_IO2, TIM15_CH1N, ADC1_IN2."+      },+      {+        "number": "12",+        "name": "PA2",+        "type": "bidirectional",+        "description": "GPIO port A pin 2 (3.3V tolerant, ADC capable), alternate functions include USART2_TX, TIM2_CH3, TIM15_CH1, TSC_G1_IO3, COMP2_OUT, ADC1_IN3."+      },+      {+        "number": "13",+        "name": "PA3",+        "type": "bidirectional",+        "description": "GPIO port A pin 3 (3.3V tolerant, ADC capable), alternate functions include USART2_RX, TIM2_CH4, TIM15_CH2, TSC_G1_IO4, ADC1_IN4."+      },+      {+        "number": "14",+        "name": "PA4",+        "type": "bidirectional",+        "description": "GPIO port A pin 4 (3.3V tolerant, ADC capable), alternate functions include SPI1_NSS, SPI3_NSS, USART2_CK, TSC_G2_IO1, TIM3_CH2, ADC2_IN1, DAC1_OUT1."+      },+      {+        "number": "15",+        "name": "PA5",+        "type": "bidirectional",+        "description": "GPIO port A pin 5 (3.3V tolerant, ADC capable), alternate functions include SPI1_SCK, TIM2_CH1_ETR, TSC_G2_IO2, ADC2_IN2."+      },+      {+        "number": "16",+        "name": "PA6",+        "type": "bidirectional",+        "description": "GPIO port A pin 6 (3.3V tolerant, ADC capable), alternate functions include SPI1_MISO, TIM3_CH1, TIM1_BKIN, TIM16_CH1, COMP1_OUT, TSC_G2_IO3, ADC2_IN3."+      },+      {+        "number": "17",+        "name": "PA7",+        "type": "bidirectional",+        "description": "GPIO port A pin 7 (3.3V tolerant, ADC capable), alternate functions include SPI1_MOSI, TIM3_CH2, TIM17_CH1, TIM1_CH1N, TSC_G2_IO4, COMP2_OUT, ADC2_IN4."+      },+      {+        "number": "18",+        "name": "PB0",+        "type": "bidirectional",+        "description": "GPIO port B pin 0 (3.3V tolerant, ADC capable), alternate functions include TIM3_CH3, TIM1_CH2N, TSC_G3_IO2, COMP4_INP."+      },+      {+        "number": "19",+        "name": "PB1",+        "type": "bidirectional",+        "description": "GPIO port B pin 1 (3.3V tolerant, ADC capable), alternate functions include TIM3_CH4, TIM1_CH3N, COMP4_OUT, TSC_G3_IO3."+      },+      {+        "number": "20",+        "name": "PB2",+        "type": "bidirectional",+        "description": "GPIO port B pin 2 (3.3V tolerant, ADC capable), alternate functions include TSC_G3_IO4, ADC2_IN12, COMP4_INM."+      },+      {+        "number": "21",+        "name": "PB10",+        "type": "bidirectional",+        "description": "GPIO port B pin 10 (3.3V tolerant I/O), alternate functions include USART3_TX, TIM2_CH3, TSC_SYNC."+      },+      {+        "number": "22",+        "name": "PB11",+        "type": "bidirectional",+        "description": "GPIO port B pin 11 (3.3V tolerant I/O), alternate functions include USART3_RX, TIM2_CH4, TSC_G6_IO1, COMP6_INP."+      },+      {+        "number": "23",+        "name": "VSS",+        "type": "power_in",+        "description": "Digital ground pin, must be connected to external ground and decoupled with filtering capacitors."+      },+      {+        "number": "24",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital power supply pin, voltage range 2.0 V to 3.6 V, must be decoupled with filtering capacitors."+      },+      {+        "number": "25",+        "name": "PB12",+        "type": "bidirectional",+        "description": "GPIO port B pin 12 (5V tolerant I/O), alternate functions include SPI2_NSS, I2S2_WS, I2C2_SMBA, USART3_CK, TIM1_BKIN, TSC_G6_IO2."+      },+      {+        "number": "26",+        "name": "PB13",+        "type": "bidirectional",+        "description": "GPIO port B pin 13 (5V tolerant I/O), alternate functions include SPI2_SCK, I2S2_CK, USART3_CTS, TIM1_CH1N, TSC_G6_IO3."+      },+      {+        "number": "27",+        "name": "PB14",+        "type": "bidirectional",+        "description": "GPIO port B pin 14 (5V tolerant I/O), alternate functions include SPI2_MISO, I2S2ext_SD, USART3_RTS_DE, TIM1_CH2N, TIM15_CH1, TSC_G6_IO4."+      },+      {+        "number": "28",+        "name": "PB15",+        "type": "bidirectional",+        "description": "GPIO port B pin 15 (5V tolerant I/O), alternate functions include SPI2_MOSI, I2S2_SD, TIM1_CH3N, RTC_REFIN, TIM15_CH1N, TIM15_CH2, COMP6_INM."+      },+      {+        "number": "29",+        "name": "PA8",+        "type": "bidirectional",+        "description": "GPIO port A pin 8 (5V tolerant I/O), alternate functions include I2C2_SMBA, I2S2_MCK, USART1_CK, TIM1_CH1, TIM4_ETR, MCO."+      },+      {+        "number": "30",+        "name": "PA9",+        "type": "bidirectional",+        "description": "GPIO port A pin 9 (5V tolerant, FM+ capable I/O), alternate functions include I2C2_SCL, I2S3_MCK, USART1_TX, TIM1_CH2, TIM2_CH3, TIM15_BKIN, TSC_G4_IO1."+      },+      {+        "number": "31",+        "name": "PA10",+        "type": "bidirectional",+        "description": "GPIO port A pin 10 (5V tolerant, FM+ capable I/O), alternate functions include I2C2_SDA, USART1_RX, TIM1_CH3, TIM2_CH4, TIM17_BKIN, TSC_G4_IO2, COMP6_OUT."+      },+      {+        "number": "32",+        "name": "PA11",+        "type": "bidirectional",+        "description": "GPIO port A pin 11 (5V tolerant I/O), alternate functions include USART1_CTS, USB_DM, CAN_RX, TIM1_CH1N, TIM1_CH4, TIM1_BKIN2, TIM4_CH1, COMP1_OUT."+      },+      {+        "number": "33",+        "name": "PA12",+        "type": "bidirectional",+        "description": "GPIO port A pin 12 (5V tolerant I/O), alternate functions include USART1_RTS_DE, USB_DP, CAN_TX, TIM1_CH2N, TIM1_ETR, TIM4_CH2, TIM16_CH1, COMP2_OUT."+      },+      {+        "number": "34",+        "name": "PA13",+        "type": "bidirectional",+        "description": "GPIO port A pin 13 (5V tolerant I/O), alternate functions include USART3_CTS, TIM4_CH3, TIM16_CH1N, TSC_G4_IO3, IR_OUT, SWDIO-JTMS for debug."+      },+      {+        "number": "35",+        "name": "VSS",+        "type": "power_in",+        "description": "Digital ground pin, must be connected to external ground and decoupled with filtering capacitors."+      },+      {+        "number": "36",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital power supply pin, voltage range 2.0 V to 3.6 V, must be decoupled with filtering capacitors."+      },+      {+        "number": "37",+        "name": "PA14",+        "type": "bidirectional",+        "description": "GPIO port A pin 14 (5V tolerant, FM+ capable I/O), alternate functions include I2C1_SDA, USART2_TX, TIM1_BKIN, TSC_G4_IO4, SWCLK-JTCK for debug."+      },+      {+        "number": "38",+        "name": "PA15",+        "type": "bidirectional",+        "description": "GPIO port A pin 15 (5V tolerant, FM+ capable I/O), alternate functions include I2C1_SCL, SPI1_NSS, SPI3_NSS, I2S3_WS, JTDI, USART2_RX, TIM1_BKIN, TIM2_CH1_ETR."+      },+      {+        "number": "39",+        "name": "PB3",+        "type": "bidirectional",+        "description": "GPIO port B pin 3 (5V tolerant I/O), alternate functions include SPI3_SCK, I2S3_CK, SPI1_SCK, USART2_TX, TIM2_CH2, TIM3_ETR, TIM4_ETR, TSC_G5_IO1, JTDO-TRACESWO."+      },+      {+        "number": "40",+        "name": "PB4",+        "type": "bidirectional",+        "description": "GPIO port B pin 4 (5V tolerant I/O), alternate functions include SPI3_MISO, I2S3ext_SD, SPI1_MISO, USART2_RX, TIM3_CH1, TIM16_CH1, TIM17_BKIN, TSC_G5_IO2, NJTRST."+      },+      {+        "number": "41",+        "name": "PB5",+        "type": "bidirectional",+        "description": "GPIO port B pin 5 (5V tolerant I/O), alternate functions include SPI3_MOSI, SPI1_MOSI, I2S3_SD, I2C1_SMBA, USART2_CK, TIM16_BKIN, TIM3_CH2, TIM17_CH1."+      },+      {+        "number": "42",+        "name": "PB6",+        "type": "bidirectional",+        "description": "GPIO port B pin 6 (5V tolerant, FM+ capable I/O), alternate functions include I2C1_SCL, USART1_TX, TIM16_CH1N, TIM4_CH1, TSC_G5_IO3."+      },+      {+        "number": "43",+        "name": "PB7",+        "type": "bidirectional",+        "description": "GPIO port B pin 7 (5V tolerant, FM+ capable I/O), alternate functions include I2C1_SDA, USART1_RX, TIM3_CH4, TIM4_CH2, TIM17_CH1N, TSC_G5_IO4."+      },+      {+        "number": "44",+        "name": "BOOT0",+        "type": "input",+        "description": "Boot memory selection pin, determines boot mode (user Flash, system memory, or SRAM) at device startup, voltage range 0 V to 5.5 V."+      },+      {+        "number": "45",+        "name": "PB8",+        "type": "bidirectional",+        "description": "GPIO port B pin 8 (5V tolerant, FM+ capable I/O), alternate functions include I2C1_SCL, CAN_RX, TIM16_CH1, TIM4_CH3, TIM1_BKIN, TSC_SYNC, COMP1_OUT."+      },+      {+        "number": "46",+        "name": "PB9",+        "type": "bidirectional",+        "description": "GPIO port B pin 9 (5V tolerant, FM+ capable I/O), alternate functions include I2C1_SDA, CAN_TX, TIM17_CH1, TIM4_CH4, IR_OUT, COMP2_OUT."+      },+      {+        "number": "47",+        "name": "VSS",+        "type": "power_in",+        "description": "Digital ground pin, must be connected to external ground and decoupled with filtering capacitors."+      },+      {+        "number": "48",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital power supply pin, voltage range 2.0 V to 3.6 V, must be decoupled with filtering capacitors."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: Pin 9 (VDDA/VREF+) is documented as both analog power supply and positive reference voltage on this ; Multiple VSS and VDD pins (pins 23, 35, 47 for VSS and pins 24, 36, 48 for VDD) are listed - enginee"+        ],+        "pages_sent": 145,+        "cost_usd": 1.4307,+        "at": "2026-09-24T09:52:12"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590910170236985344",+        "pages": 145,+        "sha256": "10a072d58aca58c4",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 48,+        "described": 48,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file