← Commit history

Initial commit: component/stm32f215rgt6

Ray ·00445cb386 ·
2 files changed +580
README.mdadded+100
@@ -0,0 +1,100 @@+# STM32F215RGT6++**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · LQFP-64(10x10)++STM32F215RGT6 from STMicroelectronics, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VBAT | power_in | Backup domain power supply pin, accepts 1.8V to 3.6V for RTC and backup SRAM |+| 2 | PC13 | bidirectional | GPIO port C pin 13, 5V tolerant, max output speed 2 MHz with 30pF load due to power switch limitation |+| 3 | PC14/OSC32_IN | bidirectional | GPIO port C pin 14 or 32 kHz oscillator input, 5V tolerant FT, not 5V tolerant in oscillator mode |+| 4 | PC15/OSC32_OUT | bidirectional | GPIO port C pin 15 or 32 kHz oscillator output, 5V tolerant FT, not 5V tolerant in oscillator mode |+| 5 | PH0/OSC_IN | bidirectional | GPIO port H pin 0 or main oscillator input, 5V tolerant FT, not 5V tolerant in oscillator mode |+| 6 | PH1/OSC_OUT | bidirectional | GPIO port H pin 1 or main oscillator output, 5V tolerant FT, not 5V tolerant in oscillator mode |+| 7 | NRST | bidirectional | Reset input/output pin with embedded weak pull-up resistor, VIL = 0.8V, VIH = 2.0V typical |+| 8 | PC0 | bidirectional | GPIO port C pin 0, 5V tolerant, ADC123_IN10 alternate function for analog input |+| 9 | PC1 | bidirectional | GPIO port C pin 1, 5V tolerant, ADC123_IN11 analog input or Ethernet MDC |+| 10 | PC2 | bidirectional | GPIO port C pin 2, 5V tolerant, ADC123_IN12 analog input or SPI2 MISO |+| 11 | PC3 | bidirectional | GPIO port C pin 3, 5V tolerant, ADC123_IN13 analog input or SPI2 MOSI |+| 12 | VSSA | power_out | Analog ground supply pin, must be connected to VSS |+| 13 | VDDA | power_in | Analog power supply pin, 1.8V to 3.6V with 100nF bypass capacitor to VSSA |+| 14 | PA0/WKUP | bidirectional | GPIO port A pin 0 with wakeup capability, 5V tolerant, ADC123_IN0 analog input |+| 15 | PA1 | bidirectional | GPIO port A pin 1, 5V tolerant, ADC123_IN1 analog input or USART2/Ethernet function |+| 16 | PA2 | bidirectional | GPIO port A pin 2, 5V tolerant, ADC123_IN2 analog input or USART2 TX |+| 17 | PA3 | bidirectional | GPIO port A pin 3, 5V tolerant, ADC123_IN3 analog input or USART2 RX |+| 18 | VSS | power_out | Ground supply pin, must be connected to circuit ground |+| 19 | VDD | power_in | Power supply input pin, accepts 1.8V to 3.6V |+| 20 | PA4 | bidirectional | GPIO port A pin 4, 3.3V TTL tolerant, ADC12_IN4/DAC_OUT1 analog function |+| 21 | PA5 | bidirectional | GPIO port A pin 5, 3.3V TTL tolerant, ADC12_IN5/DAC_OUT2 analog function or SPI1 SCK |+| 22 | PA6 | bidirectional | GPIO port A pin 6, 5V tolerant, ADC12_IN6 analog input or SPI1 MISO |+| 23 | PA7 | bidirectional | GPIO port A pin 7, 5V tolerant, ADC12_IN7 analog input or SPI1 MOSI |+| 24 | PC4 | bidirectional | GPIO port C pin 4, 5V tolerant, ADC12_IN14 analog input or Ethernet RXD0 |+| 25 | PC5 | bidirectional | GPIO port C pin 5, 5V tolerant, ADC12_IN15 analog input or Ethernet RXD1 |+| 26 | PB0 | bidirectional | GPIO port B pin 0, 5V tolerant, ADC12_IN8 analog input or Timer CH3 |+| 27 | PB1 | bidirectional | GPIO port B pin 1, 5V tolerant, ADC12_IN9 analog input or Timer CH4 |+| 28 | PB2/BOOT1 | bidirectional | GPIO port B pin 2 with BOOT1 function for boot mode selection |+| 29 | PB10 | bidirectional | GPIO port B pin 10, 5V tolerant, can be used for I2C2 SCL or SPI2 SCK |+| 30 | PB11 | bidirectional | GPIO port B pin 11, 5V tolerant, can be used for I2C2 SDA or USART3 RX |+| 31 | VCAP_1 | power_out | Internal voltage regulator output capacitor pin, connect 1µF to 100nF capacitor to VSS |+| 32 | VDD | power_in | Power supply input pin, accepts 1.8V to 3.6V |+| 33 | PB12 | bidirectional | GPIO port B pin 12, 5V tolerant, can be used for SPI2/I2C2/USART3/CAN2 |+| 34 | PB13 | bidirectional | GPIO port B pin 13, 5V tolerant, can be used for SPI2 SCK or CAN2 TX |+| 35 | PB14 | bidirectional | GPIO port B pin 14, 5V tolerant, can be used for SPI2 MISO or Timer |+| 36 | PB15 | bidirectional | GPIO port B pin 15, 5V tolerant, can be used for SPI2 MOSI or OTG HS DP |+| 37 | PC6 | bidirectional | GPIO port C pin 6, 5V tolerant, can be used for I2S2/Timer/SDIO/USART6 |+| 38 | PC7 | bidirectional | GPIO port C pin 7, 5V tolerant, can be used for I2S3/Timer/SDIO/USART6 |+| 39 | PC8 | bidirectional | GPIO port C pin 8, 5V tolerant, can be used for Timer/SDIO/USART6 |+| 40 | PC9 | bidirectional | GPIO port C pin 9, 5V tolerant, MCO2 or can be used for Timer/SDIO/I2C3 |+| 41 | PA8 | bidirectional | GPIO port A pin 8, 5V tolerant, MCO1 or can be used for USART1/Timer/I2C3 |+| 42 | PA9 | bidirectional | GPIO port A pin 9, 5V tolerant, OTG_FS_VBUS or USART1 TX |+| 43 | PA10 | bidirectional | GPIO port A pin 10, 5V tolerant, OTG_FS_ID or USART1 RX |+| 44 | PA11 | bidirectional | GPIO port A pin 11, 5V tolerant, OTG_FS_DM or CAN1 RX |+| 45 | PA12 | bidirectional | GPIO port A pin 12, 5V tolerant, OTG_FS_DP or CAN1 TX |+| 46 | PA13 | bidirectional | GPIO port A pin 13, JTMS-SWDIO debug interface pin for JTAG/SWD |+| 47 | VCAP_2 | power_out | Internal voltage regulator output capacitor pin, connect 1µF to 100nF capacitor to VSS |+| 48 | VDD | power_in | Power supply input pin, accepts 1.8V to 3.6V |+| 49 | PA14 | bidirectional | GPIO port A pin 14, JTCK-SWCLK debug interface clock pin for JTAG/SWD |+| 50 | PA15 | bidirectional | GPIO port A pin 15, JTDI debug interface data input pin for JTAG |+| 51 | PC10 | bidirectional | GPIO port C pin 10, 5V tolerant, can be used for SPI3/UART4/SDIO |+| 52 | PC11 | bidirectional | GPIO port C pin 11, 5V tolerant, can be used for SPI3/UART4/SDIO |+| 53 | PC12 | bidirectional | GPIO port C pin 12, 5V tolerant, can be used for SPI3/UART5/SDIO |+| 54 | PD2 | bidirectional | GPIO port D pin 2, 5V tolerant, can be used for Timer/UART5/SDIO |+| 55 | PB3 | bidirectional | GPIO port B pin 3, JTDO/TRACESWO debug interface data output pin |+| 56 | PB4 | bidirectional | GPIO port B pin 4, 5V tolerant, JTRST or can be used for SPI1/Timer |+| 57 | PB5 | bidirectional | GPIO port B pin 5, 5V tolerant, can be used for I2C1/SPI1/CAN2 |+| 58 | PB6 | bidirectional | GPIO port B pin 6, 5V tolerant, can be used for I2C1/Timer/CAN2/USART1 |+| 59 | PB7 | bidirectional | GPIO port B pin 7, 5V tolerant, can be used for I2C1/Timer/USART1 |+| 60 | BOOT0 | input | Bootstrap pin for boot mode selection, VPP capable for pin programming |+| 61 | PB8 | bidirectional | GPIO port B pin 8, 5V tolerant, can be used for Timer/I2C1/SDIO/CAN1 |+| 62 | PB9 | bidirectional | GPIO port B pin 9, 5V tolerant, can be used for SPI2/I2C1/Timer/SDIO/CAN1 |+| 63 | VSS | power_out | Ground supply pin, must be connected to circuit ground |+| 64 | VDD | power_in | Power supply input pin, accepts 1.8V to 3.6V |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | LQFP-64(10x10) |+| Category | Embedded Processors & Controllers |+| Pins | 64 |++## CAD (KiCad official)++- Symbol: `STM32F215RGT6`+- Footprint: `Package_QFP:LQFP-64_10x10mm_P0.5mm`+- 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)+- 3D model files: `stm32f215rgt6-etched.step` / `stm32f215rgt6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32f215rgt6.step` / `stm32f215rgt6.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588907790874660864) (180 pp, sha256 `081e0a9e956467f5`, retrieved 2026-09-24, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm32f215rgt6-datasheet.pdf)
page.jsonadded+480
@@ -0,0 +1,480 @@+{+  "slug": "stm32f215rgt6",+  "version": "0.1.0",+  "type": "component",+  "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-64(10x10). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "embedded processors & controllers",+    "stm32f215rgt6",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "stm32f215rgt6.kicad_sym",+    "stm32f215rgt6.kicad_mod",+    "stm32f215rgt6.glb",+    "stm32f215rgt6.step",+    "stm32f215rgt6.lbr",+    "docs/hero.png",+    "docs/stm32f215rgt6-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "STM32F215RGT6",+    "manufacturer": "STMicroelectronics",+    "package": "LQFP-64(10x10)",+    "pin_count": 64,+    "category": "Embedded Processors & Controllers",+    "subcategory": "Microcontrollers (MCU/MPU/SOC)",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588907790874660864",+    "parts": {+      "symbol": "stm32f215rgt6.kicad_sym",+      "footprint": "stm32f215rgt6.kicad_mod",+      "model_3d": "stm32f215rgt6-etched.glb",+      "model_3d_plain": "stm32f215rgt6.glb",+      "model_3d_step": "stm32f215rgt6-etched.step",+      "model_3d_step_plain": "stm32f215rgt6.step",+      "lbr": "stm32f215rgt6.lbr"+    },+    "distributor_links": {+      "lcsc": "C961491"+    },+    "pins": [+      {+        "number": "1",+        "name": "VBAT",+        "type": "power_in",+        "description": "Backup domain power supply pin, accepts 1.8V to 3.6V for RTC and backup SRAM"+      },+      {+        "number": "2",+        "name": "PC13",+        "type": "bidirectional",+        "description": "GPIO port C pin 13, 5V tolerant, max output speed 2 MHz with 30pF load due to power switch limitation"+      },+      {+        "number": "3",+        "name": "PC14/OSC32_IN",+        "type": "bidirectional",+        "description": "GPIO port C pin 14 or 32 kHz oscillator input, 5V tolerant FT, not 5V tolerant in oscillator mode"+      },+      {+        "number": "4",+        "name": "PC15/OSC32_OUT",+        "type": "bidirectional",+        "description": "GPIO port C pin 15 or 32 kHz oscillator output, 5V tolerant FT, not 5V tolerant in oscillator mode"+      },+      {+        "number": "5",+        "name": "PH0/OSC_IN",+        "type": "bidirectional",+        "description": "GPIO port H pin 0 or main oscillator input, 5V tolerant FT, not 5V tolerant in oscillator mode"+      },+      {+        "number": "6",+        "name": "PH1/OSC_OUT",+        "type": "bidirectional",+        "description": "GPIO port H pin 1 or main oscillator output, 5V tolerant FT, not 5V tolerant in oscillator mode"+      },+      {+        "number": "7",+        "name": "NRST",+        "type": "bidirectional",+        "description": "Reset input/output pin with embedded weak pull-up resistor, VIL = 0.8V, VIH = 2.0V typical"+      },+      {+        "number": "8",+        "name": "PC0",+        "type": "bidirectional",+        "description": "GPIO port C pin 0, 5V tolerant, ADC123_IN10 alternate function for analog input"+      },+      {+        "number": "9",+        "name": "PC1",+        "type": "bidirectional",+        "description": "GPIO port C pin 1, 5V tolerant, ADC123_IN11 analog input or Ethernet MDC"+      },+      {+        "number": "10",+        "name": "PC2",+        "type": "bidirectional",+        "description": "GPIO port C pin 2, 5V tolerant, ADC123_IN12 analog input or SPI2 MISO"+      },+      {+        "number": "11",+        "name": "PC3",+        "type": "bidirectional",+        "description": "GPIO port C pin 3, 5V tolerant, ADC123_IN13 analog input or SPI2 MOSI"+      },+      {+        "number": "12",+        "name": "VSSA",+        "type": "power_out",+        "description": "Analog ground supply pin, must be connected to VSS"+      },+      {+        "number": "13",+        "name": "VDDA",+        "type": "power_in",+        "description": "Analog power supply pin, 1.8V to 3.6V with 100nF bypass capacitor to VSSA"+      },+      {+        "number": "14",+        "name": "PA0/WKUP",+        "type": "bidirectional",+        "description": "GPIO port A pin 0 with wakeup capability, 5V tolerant, ADC123_IN0 analog input"+      },+      {+        "number": "15",+        "name": "PA1",+        "type": "bidirectional",+        "description": "GPIO port A pin 1, 5V tolerant, ADC123_IN1 analog input or USART2/Ethernet function"+      },+      {+        "number": "16",+        "name": "PA2",+        "type": "bidirectional",+        "description": "GPIO port A pin 2, 5V tolerant, ADC123_IN2 analog input or USART2 TX"+      },+      {+        "number": "17",+        "name": "PA3",+        "type": "bidirectional",+        "description": "GPIO port A pin 3, 5V tolerant, ADC123_IN3 analog input or USART2 RX"+      },+      {+        "number": "18",+        "name": "VSS",+        "type": "power_out",+        "description": "Ground supply pin, must be connected to circuit ground"+      },+      {+        "number": "19",+        "name": "VDD",+        "type": "power_in",+        "description": "Power supply input pin, accepts 1.8V to 3.6V"+      },+      {+        "number": "20",+        "name": "PA4",+        "type": "bidirectional",+        "description": "GPIO port A pin 4, 3.3V TTL tolerant, ADC12_IN4/DAC_OUT1 analog function"+      },+      {+        "number": "21",+        "name": "PA5",+        "type": "bidirectional",+        "description": "GPIO port A pin 5, 3.3V TTL tolerant, ADC12_IN5/DAC_OUT2 analog function or SPI1 SCK"+      },+      {+        "number": "22",+        "name": "PA6",+        "type": "bidirectional",+        "description": "GPIO port A pin 6, 5V tolerant, ADC12_IN6 analog input or SPI1 MISO"+      },+      {+        "number": "23",+        "name": "PA7",+        "type": "bidirectional",+        "description": "GPIO port A pin 7, 5V tolerant, ADC12_IN7 analog input or SPI1 MOSI"+      },+      {+        "number": "24",+        "name": "PC4",+        "type": "bidirectional",+        "description": "GPIO port C pin 4, 5V tolerant, ADC12_IN14 analog input or Ethernet RXD0"+      },+      {+        "number": "25",+        "name": "PC5",+        "type": "bidirectional",+        "description": "GPIO port C pin 5, 5V tolerant, ADC12_IN15 analog input or Ethernet RXD1"+      },+      {+        "number": "26",+        "name": "PB0",+        "type": "bidirectional",+        "description": "GPIO port B pin 0, 5V tolerant, ADC12_IN8 analog input or Timer CH3"+      },+      {+        "number": "27",+        "name": "PB1",+        "type": "bidirectional",+        "description": "GPIO port B pin 1, 5V tolerant, ADC12_IN9 analog input or Timer CH4"+      },+      {+        "number": "28",+        "name": "PB2/BOOT1",+        "type": "bidirectional",+        "description": "GPIO port B pin 2 with BOOT1 function for boot mode selection"+      },+      {+        "number": "29",+        "name": "PB10",+        "type": "bidirectional",+        "description": "GPIO port B pin 10, 5V tolerant, can be used for I2C2 SCL or SPI2 SCK"+      },+      {+        "number": "30",+        "name": "PB11",+        "type": "bidirectional",+        "description": "GPIO port B pin 11, 5V tolerant, can be used for I2C2 SDA or USART3 RX"+      },+      {+        "number": "31",+        "name": "VCAP_1",+        "type": "power_out",+        "description": "Internal voltage regulator output capacitor pin, connect 1µF to 100nF capacitor to VSS"+      },+      {+        "number": "32",+        "name": "VDD",+        "type": "power_in",+        "description": "Power supply input pin, accepts 1.8V to 3.6V"+      },+      {+        "number": "33",+        "name": "PB12",+        "type": "bidirectional",+        "description": "GPIO port B pin 12, 5V tolerant, can be used for SPI2/I2C2/USART3/CAN2"+      },+      {+        "number": "34",+        "name": "PB13",+        "type": "bidirectional",+        "description": "GPIO port B pin 13, 5V tolerant, can be used for SPI2 SCK or CAN2 TX"+      },+      {+        "number": "35",+        "name": "PB14",+        "type": "bidirectional",+        "description": "GPIO port B pin 14, 5V tolerant, can be used for SPI2 MISO or Timer"+      },+      {+        "number": "36",+        "name": "PB15",+        "type": "bidirectional",+        "description": "GPIO port B pin 15, 5V tolerant, can be used for SPI2 MOSI or OTG HS DP"+      },+      {+        "number": "37",+        "name": "PC6",+        "type": "bidirectional",+        "description": "GPIO port C pin 6, 5V tolerant, can be used for I2S2/Timer/SDIO/USART6"+      },+      {+        "number": "38",+        "name": "PC7",+        "type": "bidirectional",+        "description": "GPIO port C pin 7, 5V tolerant, can be used for I2S3/Timer/SDIO/USART6"+      },+      {+        "number": "39",+        "name": "PC8",+        "type": "bidirectional",+        "description": "GPIO port C pin 8, 5V tolerant, can be used for Timer/SDIO/USART6"+      },+      {+        "number": "40",+        "name": "PC9",+        "type": "bidirectional",+        "description": "GPIO port C pin 9, 5V tolerant, MCO2 or can be used for Timer/SDIO/I2C3"+      },+      {+        "number": "41",+        "name": "PA8",+        "type": "bidirectional",+        "description": "GPIO port A pin 8, 5V tolerant, MCO1 or can be used for USART1/Timer/I2C3"+      },+      {+        "number": "42",+        "name": "PA9",+        "type": "bidirectional",+        "description": "GPIO port A pin 9, 5V tolerant, OTG_FS_VBUS or USART1 TX"+      },+      {+        "number": "43",+        "name": "PA10",+        "type": "bidirectional",+        "description": "GPIO port A pin 10, 5V tolerant, OTG_FS_ID or USART1 RX"+      },+      {+        "number": "44",+        "name": "PA11",+        "type": "bidirectional",+        "description": "GPIO port A pin 11, 5V tolerant, OTG_FS_DM or CAN1 RX"+      },+      {+        "number": "45",+        "name": "PA12",+        "type": "bidirectional",+        "description": "GPIO port A pin 12, 5V tolerant, OTG_FS_DP or CAN1 TX"+      },+      {+        "number": "46",+        "name": "PA13",+        "type": "bidirectional",+        "description": "GPIO port A pin 13, JTMS-SWDIO debug interface pin for JTAG/SWD"+      },+      {+        "number": "47",+        "name": "VCAP_2",+        "type": "power_out",+        "description": "Internal voltage regulator output capacitor pin, connect 1µF to 100nF capacitor to VSS"+      },+      {+        "number": "48",+        "name": "VDD",+        "type": "power_in",+        "description": "Power supply input pin, accepts 1.8V to 3.6V"+      },+      {+        "number": "49",+        "name": "PA14",+        "type": "bidirectional",+        "description": "GPIO port A pin 14, JTCK-SWCLK debug interface clock pin for JTAG/SWD"+      },+      {+        "number": "50",+        "name": "PA15",+        "type": "bidirectional",+        "description": "GPIO port A pin 15, JTDI debug interface data input pin for JTAG"+      },+      {+        "number": "51",+        "name": "PC10",+        "type": "bidirectional",+        "description": "GPIO port C pin 10, 5V tolerant, can be used for SPI3/UART4/SDIO"+      },+      {+        "number": "52",+        "name": "PC11",+        "type": "bidirectional",+        "description": "GPIO port C pin 11, 5V tolerant, can be used for SPI3/UART4/SDIO"+      },+      {+        "number": "53",+        "name": "PC12",+        "type": "bidirectional",+        "description": "GPIO port C pin 12, 5V tolerant, can be used for SPI3/UART5/SDIO"+      },+      {+        "number": "54",+        "name": "PD2",+        "type": "bidirectional",+        "description": "GPIO port D pin 2, 5V tolerant, can be used for Timer/UART5/SDIO"+      },+      {+        "number": "55",+        "name": "PB3",+        "type": "bidirectional",+        "description": "GPIO port B pin 3, JTDO/TRACESWO debug interface data output pin"+      },+      {+        "number": "56",+        "name": "PB4",+        "type": "bidirectional",+        "description": "GPIO port B pin 4, 5V tolerant, JTRST or can be used for SPI1/Timer"+      },+      {+        "number": "57",+        "name": "PB5",+        "type": "bidirectional",+        "description": "GPIO port B pin 5, 5V tolerant, can be used for I2C1/SPI1/CAN2"+      },+      {+        "number": "58",+        "name": "PB6",+        "type": "bidirectional",+        "description": "GPIO port B pin 6, 5V tolerant, can be used for I2C1/Timer/CAN2/USART1"+      },+      {+        "number": "59",+        "name": "PB7",+        "type": "bidirectional",+        "description": "GPIO port B pin 7, 5V tolerant, can be used for I2C1/Timer/USART1"+      },+      {+        "number": "60",+        "name": "BOOT0",+        "type": "input",+        "description": "Bootstrap pin for boot mode selection, VPP capable for pin programming"+      },+      {+        "number": "61",+        "name": "PB8",+        "type": "bidirectional",+        "description": "GPIO port B pin 8, 5V tolerant, can be used for Timer/I2C1/SDIO/CAN1"+      },+      {+        "number": "62",+        "name": "PB9",+        "type": "bidirectional",+        "description": "GPIO port B pin 9, 5V tolerant, can be used for SPI2/I2C1/Timer/SDIO/CAN1"+      },+      {+        "number": "63",+        "name": "VSS",+        "type": "power_out",+        "description": "Ground supply pin, must be connected to circuit ground"+      },+      {+        "number": "64",+        "name": "VDD",+        "type": "power_in",+        "description": "Power supply input pin, accepts 1.8V to 3.6V"+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: PC13, PC14, PC15 pins are powered through a limited current switch (3mA max), restricting their use ; NRST pin has RST type indicating special embedded weak pull-up and reset functionality, not standard; BOOT0 pin has VPP capability which may require special programming interface handling",+          "41/64 pins cited to the wrong page (name found elsewhere): ['22:PA6@p46', '23:PA7@p46', '24:PC4@p46', '25:PC5@p46']"+        ],+        "pages_sent": 59,+        "cost_usd": 0.9139,+        "at": "2026-09-24T00:36:03"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588907790874660864",+        "pages": 180,+        "sha256": "081e0a9e956467f5",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 64,+        "described": 64,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file