← Commit history

Initial commit: component/stm32f207vct6

Ray ·0984132e1b ·
2 files changed +829
README.mdadded+136
@@ -0,0 +1,136 @@+# STM32F207VCT6++**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · LQFP-100(14x14)++STM32F207VCT6 from STMicroelectronics, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | PE2 | bidirectional | 5V-tolerant GPIO PE2 with alternate functions TRACECLK, FSMC_A23, ETH_MII_TXD3 and EVENTOUT. |+| 2 | PE3 | bidirectional | 5V-tolerant GPIO PE3 with alternate functions TRACED0, FSMC_A19 and EVENTOUT. |+| 3 | PE4 | bidirectional | 5V-tolerant GPIO PE4 with alternate functions TRACED1, FSMC_A20, DCMI_D4 and EVENTOUT. |+| 4 | PE5 | bidirectional | 5V-tolerant GPIO PE5 with alternate functions TRACED2, FSMC_A21, TIM9_CH1, DCMI_D6 and EVENTOUT. |+| 5 | PE6 | bidirectional | 5V-tolerant GPIO PE6 with alternate functions TRACED3, FSMC_A22, TIM9_CH2, DCMI_D7 and EVENTOUT. |+| 6 | VBAT | power_in | Battery backup supply input for RTC, 20x32-bit backup registers and optional backup SRAM when VDD is not present. |+| 7 | PC13 | bidirectional | 5V-tolerant GPIO PC13, supplied through the power switch (limited to 3 mA sink) with alternate function RTC_AF1 and EVENTOUT; output speed must not exceed 2 MHz with max 30 pF load. |+| 8 | PC14-OSC32_IN | bidirectional | 5V-tolerant GPIO PC14, supplied through the power switch, also usable as 32.768 kHz LSE oscillator input (OSC32_IN) with EVENTOUT alternate function. |+| 9 | PC15-OSC32_OUT | bidirectional | 5V-tolerant GPIO PC15, supplied through the power switch, also usable as 32.768 kHz LSE oscillator output (OSC32_OUT) with EVENTOUT alternate function. |+| 10 | VSS | power_in | Digital ground supply pin. |+| 11 | VDD | power_in | Digital supply pin, 1.8 to 3.6 V application supply and I/O supply. |+| 12 | PH0-OSC_IN | bidirectional | 5V-tolerant GPIO PH0, also usable as 4-26 MHz HSE crystal oscillator input (OSC_IN) with EVENTOUT alternate function. |+| 13 | PH1-OSC_OUT | bidirectional | 5V-tolerant GPIO PH1, also usable as 4-26 MHz HSE crystal oscillator output (OSC_OUT) with EVENTOUT alternate function. |+| 14 | NRST | bidirectional | Bidirectional external reset pin with embedded weak pull-up resistor; active low, used to reset the device. |+| 15 | PC0 | bidirectional | 5V-tolerant GPIO PC0 with alternate function OTG_HS_ULPI_STP, EVENTOUT and additional analog function ADC123_IN10. |+| 16 | PC1 | bidirectional | 5V-tolerant GPIO PC1 with alternate function ETH_MDC, EVENTOUT and additional analog function ADC123_IN11. |+| 17 | PC2 | bidirectional | 5V-tolerant GPIO PC2 with alternate functions SPI2_MISO, OTG_HS_ULPI_DIR, ETH_MII_TXD2, EVENTOUT and additional analog function ADC123_IN12. |+| 18 | PC3 | bidirectional | 5V-tolerant GPIO PC3 with alternate functions SPI2_MOSI, I2S2_SD, OTG_HS_ULPI_NXT, ETH_MII_TX_CLK, EVENTOUT and additional analog function ADC123_IN13. |+| 19 | VDD | power_in | Digital supply pin, 1.8 to 3.6 V application supply and I/O supply. |+| 20 | VSSA | power_in | Analog ground supply pin for ADC, DAC, reset block and RC oscillator. |+| 21 | VREF+ | power_in | Positive reference voltage supply pin for the ADC/DAC. |+| 22 | VDDA | power_in | Analog supply pin for ADC, DAC, reset block, RC oscillator and PLL. |+| 23 | PA0-WKUP | bidirectional | 5V-tolerant GPIO PA0 with alternate functions USART2_CTS, UART4_TX, ETH_MII_CRS, TIM2_CH1_ETR, TIM5_CH1, TIM8_ETR, EVENTOUT and additional functions ADC123_IN0 and WKUP (wakeup from standby). |+| 24 | PA1 | bidirectional | 5V-tolerant GPIO PA1 with alternate functions USART2_RTS, UART4_RX, ETH_RMII_REF_CLK, ETH_MII_RX_CLK, TIM5_CH2, TIM2_CH2, EVENTOUT and additional analog function ADC123_IN1. |+| 25 | PA2 | bidirectional | 5V-tolerant GPIO PA2 with alternate functions USART2_TX, TIM5_CH3, TIM9_CH1, TIM2_CH3, ETH_MDIO, EVENTOUT and additional analog function ADC123_IN2. |+| 26 | PA3 | bidirectional | 5V-tolerant GPIO PA3 with alternate functions USART2_RX, TIM5_CH4, TIM9_CH2, TIM2_CH4, OTG_HS_ULPI_D0, ETH_MII_COL, EVENTOUT and additional analog function ADC123_IN3. |+| 27 | VSS | power_in | Digital ground supply pin. |+| 28 | VDD | power_in | Digital supply pin, 1.8 to 3.6 V application supply and I/O supply. |+| 29 | PA4 | bidirectional | 3.3V-tolerant (TTa) GPIO PA4 with alternate functions SPI1_NSS, SPI3_NSS, USART2_CK, DCMI_HSYNC, OTG_HS_SOF, I2S3_WS, EVENTOUT and additional functions ADC12_IN4 and DAC_OUT1. |+| 30 | PA5 | bidirectional | 3.3V-tolerant (TTa) GPIO PA5 with alternate functions SPI1_SCK, OTG_HS_ULPI_CK, TIM2_CH1_ETR, TIM8_CH1N, EVENTOUT and additional functions ADC12_IN5 and DAC_OUT2. |+| 31 | PA6 | bidirectional | 5V-tolerant GPIO PA6 with alternate functions SPI1_MISO, TIM8_BKIN, TIM13_CH1, DCMI_PIXCLK, TIM3_CH1, TIM1_BKIN, EVENTOUT and additional analog function ADC12_IN6. |+| 32 | PA7 | bidirectional | 5V-tolerant GPIO PA7 with alternate functions SPI1_MOSI, TIM8_CH1N, TIM14_CH1, TIM3_CH2, ETH_MII_RX_DV, TIM1_CH1N, ETH_RMII_CRS_DV, EVENTOUT and additional analog function ADC12_IN7. |+| 33 | PC4 | bidirectional | 5V-tolerant GPIO PC4 with alternate functions ETH_RMII_RXD0, ETH_MII_RXD0, EVENTOUT and additional analog function ADC12_IN14. |+| 34 | PC5 | bidirectional | 5V-tolerant GPIO PC5 with alternate functions ETH_RMII_RXD1, ETH_MII_RXD1, EVENTOUT and additional analog function ADC12_IN15. |+| 35 | PB0 | bidirectional | 5V-tolerant GPIO PB0 with alternate functions TIM3_CH3, TIM8_CH2N, OTG_HS_ULPI_D1, ETH_MII_RXD2, TIM1_CH2N, EVENTOUT and additional analog function ADC12_IN8. |+| 36 | PB1 | bidirectional | 5V-tolerant GPIO PB1 with alternate functions TIM3_CH4, TIM8_CH3N, OTG_HS_ULPI_D2, ETH_MII_RXD3, TIM1_CH3N, EVENTOUT and additional analog function ADC12_IN9. |+| 37 | PB2-BOOT1 | bidirectional | 5V-tolerant GPIO PB2, dual-function boot pin (BOOT1) with EVENTOUT alternate function. |+| 38 | PE7 | bidirectional | 5V-tolerant GPIO PE7 with alternate functions FSMC_D4, TIM1_ETR, EVENTOUT. |+| 39 | PE8 | bidirectional | 5V-tolerant GPIO PE8 with alternate functions FSMC_D5, TIM1_CH1N, EVENTOUT. |+| 40 | PE9 | bidirectional | 5V-tolerant GPIO PE9 with alternate functions FSMC_D6, TIM1_CH1, EVENTOUT. |+| 41 | PE10 | bidirectional | 5V-tolerant GPIO PE10 with alternate functions FSMC_D7, TIM1_CH2N, EVENTOUT. |+| 42 | PE11 | bidirectional | 5V-tolerant GPIO PE11 with alternate functions FSMC_D8, TIM1_CH2, EVENTOUT. |+| 43 | PE12 | bidirectional | 5V-tolerant GPIO PE12 with alternate functions FSMC_D9, TIM1_CH3N, EVENTOUT. |+| 44 | PE13 | bidirectional | 5V-tolerant GPIO PE13 with alternate functions FSMC_D10, TIM1_CH3, EVENTOUT. |+| 45 | PE14 | bidirectional | 5V-tolerant GPIO PE14 with alternate functions FSMC_D11, TIM1_CH4, EVENTOUT. |+| 46 | PE15 | bidirectional | 5V-tolerant GPIO PE15 with alternate functions FSMC_D12, TIM1_BKIN, EVENTOUT. |+| 47 | PB10 | bidirectional | 5V-tolerant GPIO PB10 with alternate functions SPI2_SCK, I2S2_SCK, I2C2_SCL, USART3_TX, OTG_HS_ULPI_D3, ETH_MII_RX_ER, TIM2_CH3, EVENTOUT. |+| 48 | PB11 | bidirectional | 5V-tolerant GPIO PB11 with alternate functions I2C2_SDA, USART3_RX, OTG_HS_ULPI_D4, ETH_RMII_TX_EN, ETH_MII_TX_EN, TIM2_CH4, EVENTOUT. |+| 49 | VCAP_1 | power_in | Voltage regulator internal decoupling supply pin, requires an external capacitor per Section 6.3.2 (VCAP1/VCAP2 external capacitor) specifications. |+| 50 | VDD | power_in | Digital supply pin, 1.8 to 3.6 V application supply and I/O supply. |+| 51 | PB12 | bidirectional | 5V-tolerant GPIO PB12 with alternate functions SPI2_NSS, I2S2_WS, I2C2_SMBA, USART3_CK, TIM1_BKIN, CAN2_RX, OTG_HS_ULPI_D5, ETH_RMII_TXD0, ETH_MII_TXD0, OTG_HS_ID, EVENTOUT. |+| 52 | PB13 | bidirectional | 5V-tolerant GPIO PB13 with alternate functions SPI2_SCK, I2S2_SCK, USART3_CTS, TIM1_CH1N, CAN2_TX, OTG_HS_ULPI_D6, ETH_RMII_TXD1, ETH_MII_TXD1, EVENTOUT and additional function OTG_HS_VBUS. |+| 53 | PB14 | bidirectional | 5V-tolerant GPIO PB14 with alternate functions SPI2_MISO, TIM1_CH2N, TIM12_CH1, OTG_HS_DM, USART3_RTS, TIM8_CH2N, EVENTOUT. |+| 54 | PB15 | bidirectional | 5V-tolerant GPIO PB15 with alternate functions SPI2_MOSI, I2S2_SD, TIM1_CH3N, TIM8_CH3N, TIM12_CH2, OTG_HS_DP, RTC_50Hz, EVENTOUT. |+| 55 | PD8 | bidirectional | 5V-tolerant GPIO PD8 with alternate functions FSMC_D13, USART3_TX, EVENTOUT. |+| 56 | PD9 | bidirectional | 5V-tolerant GPIO PD9 with alternate functions FSMC_D14, USART3_RX, EVENTOUT. |+| 57 | PD10 | bidirectional | 5V-tolerant GPIO PD10 with alternate functions FSMC_D15, USART3_CK, EVENTOUT. |+| 58 | PD11 | bidirectional | 5V-tolerant GPIO PD11 with alternate functions FSMC_A16, USART3_CTS, EVENTOUT. |+| 59 | PD12 | bidirectional | 5V-tolerant GPIO PD12 with alternate functions FSMC_A17, TIM4_CH1, USART3_RTS, EVENTOUT. |+| 60 | PD13 | bidirectional | 5V-tolerant GPIO PD13 with alternate functions FSMC_A18, TIM4_CH2, EVENTOUT. |+| 61 | PD14 | bidirectional | 5V-tolerant GPIO PD14 with alternate functions FSMC_D0, TIM4_CH3, EVENTOUT. |+| 62 | PD15 | bidirectional | 5V-tolerant GPIO PD15 with alternate functions FSMC_D1, TIM4_CH4, EVENTOUT. |+| 63 | PC6 | bidirectional | 5V-tolerant GPIO PC6 with alternate functions I2S2_MCK, TIM8_CH1, SDIO_D6, USART6_TX, DCMI_D0, TIM3_CH1, EVENTOUT. |+| 64 | PC7 | bidirectional | 5V-tolerant GPIO PC7 with alternate functions I2S3_MCK, TIM8_CH2, SDIO_D7, USART6_RX, DCMI_D1, TIM3_CH2, EVENTOUT. |+| 65 | PC8 | bidirectional | 5V-tolerant GPIO PC8 with alternate functions TIM8_CH3, SDIO_D0, TIM3_CH3, USART6_CK, DCMI_D2, EVENTOUT. |+| 66 | PC9 | bidirectional | 5V-tolerant GPIO PC9 with alternate functions I2S2_CKIN, I2S3_CKIN, MCO2, TIM8_CH4, SDIO_D1, I2C3_SDA, DCMI_D3, TIM3_CH4, EVENTOUT. |+| 67 | PA8 | bidirectional | 5V-tolerant GPIO PA8 with alternate functions MCO1, USART1_CK, TIM1_CH1, I2C3_SCL, OTG_FS_SOF, EVENTOUT. |+| 68 | PA9 | bidirectional | 5V-tolerant GPIO PA9 with alternate functions USART1_TX, TIM1_CH2, I2C3_SMBA, DCMI_D0, EVENTOUT and additional function OTG_FS_VBUS. |+| 69 | PA10 | bidirectional | 5V-tolerant GPIO PA10 with alternate functions USART1_RX, TIM1_CH3, OTG_FS_ID, DCMI_D1, EVENTOUT. |+| 70 | PA11 | bidirectional | 5V-tolerant GPIO PA11 with alternate functions USART1_CTS, CAN1_RX, TIM1_CH4, OTG_FS_DM, EVENTOUT. |+| 71 | PA12 | bidirectional | 5V-tolerant GPIO PA12 with alternate functions USART1_RTS, CAN1_TX, TIM1_ETR, OTG_FS_DP, EVENTOUT. |+| 72 | PA13 | bidirectional | 5V-tolerant GPIO PA13, default function after reset is JTMS-SWDIO (SWJ-DP debug), also EVENTOUT alternate function. |+| 73 | VCAP_2 | power_in | Voltage regulator internal decoupling supply pin, requires an external capacitor per Section 6.3.2 (VCAP1/VCAP2 external capacitor) specifications. |+| 74 | VSS | power_in | Digital ground supply pin. |+| 75 | VDD | power_in | Digital supply pin, 1.8 to 3.6 V application supply and I/O supply. |+| 76 | PA14 | bidirectional | 5V-tolerant GPIO PA14, default function after reset is JTCK-SWCLK (SWJ-DP debug clock), also EVENTOUT alternate function. |+| 77 | PA15 | bidirectional | 5V-tolerant GPIO PA15, default function after reset is JTDI, also alternate functions SPI3_NSS, I2S3_WS, TIM2_CH1_ETR, SPI1_NSS, EVENTOUT. |+| 78 | PC10 | bidirectional | 5V-tolerant GPIO PC10 with alternate functions SPI3_SCK, I2S3_SCK, UART4_TX, SDIO_D2, DCMI_D8, USART3_TX, EVENTOUT. |+| 79 | PC11 | bidirectional | 5V-tolerant GPIO PC11 with alternate functions UART4_RX, SPI3_MISO, SDIO_D3, DCMI_D4, USART3_RX, EVENTOUT. |+| 80 | PC12 | bidirectional | 5V-tolerant GPIO PC12 with alternate functions UART5_TX, SDIO_CK, DCMI_D9, SPI3_MOSI, I2S3_SD, USART3_CK, EVENTOUT. |+| 81 | PD0 | bidirectional | 5V-tolerant GPIO PD0 with alternate functions FSMC_D2, CAN1_RX, EVENTOUT. |+| 82 | PD1 | bidirectional | 5V-tolerant GPIO PD1 with alternate functions FSMC_D3, CAN1_TX, EVENTOUT. |+| 83 | PD2 | bidirectional | 5V-tolerant GPIO PD2 with alternate functions TIM3_ETR, UART5_RX, SDIO_CMD, DCMI_D11, EVENTOUT. |+| 84 | PD3 | bidirectional | 5V-tolerant GPIO PD3 with alternate functions FSMC_CLK, USART2_CTS, EVENTOUT. |+| 85 | PD4 | bidirectional | 5V-tolerant GPIO PD4 with alternate functions FSMC_NOE, USART2_RTS, EVENTOUT. |+| 86 | PD5 | bidirectional | 5V-tolerant GPIO PD5 with alternate functions FSMC_NWE, USART2_TX, EVENTOUT. |+| 87 | PD6 | bidirectional | 5V-tolerant GPIO PD6 with alternate functions FSMC_NWAIT, USART2_RX, EVENTOUT. |+| 88 | PD7 | bidirectional | 5V-tolerant GPIO PD7 with alternate functions USART2_CK, FSMC_NE1, FSMC_NCE2, EVENTOUT. |+| 89 | PB3 | bidirectional | 5V-tolerant GPIO PB3, default function after reset is JTDO/TRACESWO, also alternate functions SPI3_SCK, I2S3_SCK, TIM2_CH2, SPI1_SCK, EVENTOUT. |+| 90 | PB4 | bidirectional | 5V-tolerant GPIO PB4, default function after reset is NJTRST, also alternate functions SPI3_MISO, TIM3_CH1, SPI1_MISO, EVENTOUT. |+| 91 | PB5 | bidirectional | 5V-tolerant GPIO PB5 with alternate functions I2C1_SMBA, CAN2_RX, OTG_HS_ULPI_D7, ETH_PPS_OUT, TIM3_CH2, SPI1_MOSI, SPI3_MOSI, DCMI_D10, I2S3_SD, EVENTOUT. |+| 92 | PB6 | bidirectional | 5V-tolerant GPIO PB6 with alternate functions I2C1_SCL, TIM4_CH1, CAN2_TX, DCMI_D5, USART1_TX, EVENTOUT. |+| 93 | PB7 | bidirectional | 5V-tolerant GPIO PB7 with alternate functions I2C1_SDA, FSMC_NL (FSMC_NADV), DCMI_VSYNC, USART1_RX, TIM4_CH2, EVENTOUT. |+| 94 | BOOT0 | input | Dedicated boot mode selection input pin (also usable as VPP Flash programming voltage) that, together with BOOT1, selects the boot memory at reset. |+| 95 | PB8 | bidirectional | 5V-tolerant GPIO PB8 with alternate functions TIM4_CH3, SDIO_D4, TIM10_CH1, DCMI_D6, ETH_MII_TXD3, I2C1_SCL, CAN1_RX, EVENTOUT. |+| 96 | PB9 | bidirectional | 5V-tolerant GPIO PB9 with alternate functions SPI2_NSS, I2S2_WS, TIM4_CH4, TIM11_CH1, SDIO_D5, DCMI_D7, I2C1_SDA, CAN1_TX, EVENTOUT. |+| 97 | PE0 | bidirectional | 5V-tolerant GPIO PE0 with alternate functions TIM4_ETR, FSMC_NBL0, DCMI_D2, EVENTOUT. |+| 98 | PE1 | bidirectional | 5V-tolerant GPIO PE1 with alternate functions FSMC_NBL1, DCMI_D3, EVENTOUT. |+| 99 | RFU | unconnected | Reserved for future use pin; may be tied to VDD, tied to VSS, or left unconnected per datasheet note. |+| 100 | VDD | power_in | Digital supply pin, 1.8 to 3.6 V application supply and I/O supply. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | LQFP-100(14x14) |+| Category | Embedded Processors & Controllers |+| Pins | 100 |++## CAD (KiCad official)++- Symbol: `STM32F207VCT6`+- Footprint: `Package_QFP:LQFP-100_14x14mm_P0.5mm`+- 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)+- 3D model files: `stm32f207vct6-etched.step` / `stm32f207vct6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32f207vct6.step` / `stm32f207vct6.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586182262567788544) (179 pp, sha256 `6ffebd41462b5c10`, retrieved 2026-09-23, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm32f207vct6-datasheet.pdf)
page.jsonadded+693
@@ -0,0 +1,693 @@+{+  "slug": "stm32f207vct6",+  "version": "0.1.0",+  "type": "component",+  "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-100(14x14). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "embedded processors & controllers",+    "stm32f207vct6",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "stm32f207vct6.kicad_sym",+    "stm32f207vct6.kicad_mod",+    "stm32f207vct6.glb",+    "stm32f207vct6.step",+    "stm32f207vct6.lbr",+    "docs/hero.png",+    "docs/stm32f207vct6-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "STM32F207VCT6",+    "manufacturer": "STMicroelectronics",+    "package": "LQFP-100(14x14)",+    "pin_count": 100,+    "category": "Embedded Processors & Controllers",+    "subcategory": "Microcontrollers (MCU/MPU/SOC)",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586182262567788544",+    "parts": {+      "symbol": "stm32f207vct6.kicad_sym",+      "footprint": "stm32f207vct6.kicad_mod",+      "model_3d": "stm32f207vct6-etched.glb",+      "model_3d_plain": "stm32f207vct6.glb",+      "model_3d_step": "stm32f207vct6-etched.step",+      "model_3d_step_plain": "stm32f207vct6.step",+      "lbr": "stm32f207vct6.lbr"+    },+    "distributor_links": {+      "lcsc": "C62447"+    },+    "pins": [+      {+        "number": "1",+        "name": "PE2",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PE2 with alternate functions TRACECLK, FSMC_A23, ETH_MII_TXD3 and EVENTOUT."+      },+      {+        "number": "2",+        "name": "PE3",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PE3 with alternate functions TRACED0, FSMC_A19 and EVENTOUT."+      },+      {+        "number": "3",+        "name": "PE4",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PE4 with alternate functions TRACED1, FSMC_A20, DCMI_D4 and EVENTOUT."+      },+      {+        "number": "4",+        "name": "PE5",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PE5 with alternate functions TRACED2, FSMC_A21, TIM9_CH1, DCMI_D6 and EVENTOUT."+      },+      {+        "number": "5",+        "name": "PE6",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PE6 with alternate functions TRACED3, FSMC_A22, TIM9_CH2, DCMI_D7 and EVENTOUT."+      },+      {+        "number": "6",+        "name": "VBAT",+        "type": "power_in",+        "description": "Battery backup supply input for RTC, 20x32-bit backup registers and optional backup SRAM when VDD is not present."+      },+      {+        "number": "7",+        "name": "PC13",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PC13, supplied through the power switch (limited to 3 mA sink) with alternate function RTC_AF1 and EVENTOUT; output speed must not exceed 2 MHz with max 30 pF load."+      },+      {+        "number": "8",+        "name": "PC14-OSC32_IN",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PC14, supplied through the power switch, also usable as 32.768 kHz LSE oscillator input (OSC32_IN) with EVENTOUT alternate function."+      },+      {+        "number": "9",+        "name": "PC15-OSC32_OUT",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PC15, supplied through the power switch, also usable as 32.768 kHz LSE oscillator output (OSC32_OUT) with EVENTOUT alternate function."+      },+      {+        "number": "10",+        "name": "VSS",+        "type": "power_in",+        "description": "Digital ground supply pin."+      },+      {+        "number": "11",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital supply pin, 1.8 to 3.6 V application supply and I/O supply."+      },+      {+        "number": "12",+        "name": "PH0-OSC_IN",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PH0, also usable as 4-26 MHz HSE crystal oscillator input (OSC_IN) with EVENTOUT alternate function."+      },+      {+        "number": "13",+        "name": "PH1-OSC_OUT",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PH1, also usable as 4-26 MHz HSE crystal oscillator output (OSC_OUT) with EVENTOUT alternate function."+      },+      {+        "number": "14",+        "name": "NRST",+        "type": "bidirectional",+        "description": "Bidirectional external reset pin with embedded weak pull-up resistor; active low, used to reset the device."+      },+      {+        "number": "15",+        "name": "PC0",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PC0 with alternate function OTG_HS_ULPI_STP, EVENTOUT and additional analog function ADC123_IN10."+      },+      {+        "number": "16",+        "name": "PC1",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PC1 with alternate function ETH_MDC, EVENTOUT and additional analog function ADC123_IN11."+      },+      {+        "number": "17",+        "name": "PC2",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PC2 with alternate functions SPI2_MISO, OTG_HS_ULPI_DIR, ETH_MII_TXD2, EVENTOUT and additional analog function ADC123_IN12."+      },+      {+        "number": "18",+        "name": "PC3",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PC3 with alternate functions SPI2_MOSI, I2S2_SD, OTG_HS_ULPI_NXT, ETH_MII_TX_CLK, EVENTOUT and additional analog function ADC123_IN13."+      },+      {+        "number": "19",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital supply pin, 1.8 to 3.6 V application supply and I/O supply."+      },+      {+        "number": "20",+        "name": "VSSA",+        "type": "power_in",+        "description": "Analog ground supply pin for ADC, DAC, reset block and RC oscillator."+      },+      {+        "number": "21",+        "name": "VREF+",+        "type": "power_in",+        "description": "Positive reference voltage supply pin for the ADC/DAC."+      },+      {+        "number": "22",+        "name": "VDDA",+        "type": "power_in",+        "description": "Analog supply pin for ADC, DAC, reset block, RC oscillator and PLL."+      },+      {+        "number": "23",+        "name": "PA0-WKUP",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PA0 with alternate functions USART2_CTS, UART4_TX, ETH_MII_CRS, TIM2_CH1_ETR, TIM5_CH1, TIM8_ETR, EVENTOUT and additional functions ADC123_IN0 and WKUP (wakeup from standby)."+      },+      {+        "number": "24",+        "name": "PA1",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PA1 with alternate functions USART2_RTS, UART4_RX, ETH_RMII_REF_CLK, ETH_MII_RX_CLK, TIM5_CH2, TIM2_CH2, EVENTOUT and additional analog function ADC123_IN1."+      },+      {+        "number": "25",+        "name": "PA2",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PA2 with alternate functions USART2_TX, TIM5_CH3, TIM9_CH1, TIM2_CH3, ETH_MDIO, EVENTOUT and additional analog function ADC123_IN2."+      },+      {+        "number": "26",+        "name": "PA3",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PA3 with alternate functions USART2_RX, TIM5_CH4, TIM9_CH2, TIM2_CH4, OTG_HS_ULPI_D0, ETH_MII_COL, EVENTOUT and additional analog function ADC123_IN3."+      },+      {+        "number": "27",+        "name": "VSS",+        "type": "power_in",+        "description": "Digital ground supply pin."+      },+      {+        "number": "28",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital supply pin, 1.8 to 3.6 V application supply and I/O supply."+      },+      {+        "number": "29",+        "name": "PA4",+        "type": "bidirectional",+        "description": "3.3V-tolerant (TTa) GPIO PA4 with alternate functions SPI1_NSS, SPI3_NSS, USART2_CK, DCMI_HSYNC, OTG_HS_SOF, I2S3_WS, EVENTOUT and additional functions ADC12_IN4 and DAC_OUT1."+      },+      {+        "number": "30",+        "name": "PA5",+        "type": "bidirectional",+        "description": "3.3V-tolerant (TTa) GPIO PA5 with alternate functions SPI1_SCK, OTG_HS_ULPI_CK, TIM2_CH1_ETR, TIM8_CH1N, EVENTOUT and additional functions ADC12_IN5 and DAC_OUT2."+      },+      {+        "number": "31",+        "name": "PA6",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PA6 with alternate functions SPI1_MISO, TIM8_BKIN, TIM13_CH1, DCMI_PIXCLK, TIM3_CH1, TIM1_BKIN, EVENTOUT and additional analog function ADC12_IN6."+      },+      {+        "number": "32",+        "name": "PA7",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PA7 with alternate functions SPI1_MOSI, TIM8_CH1N, TIM14_CH1, TIM3_CH2, ETH_MII_RX_DV, TIM1_CH1N, ETH_RMII_CRS_DV, EVENTOUT and additional analog function ADC12_IN7."+      },+      {+        "number": "33",+        "name": "PC4",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PC4 with alternate functions ETH_RMII_RXD0, ETH_MII_RXD0, EVENTOUT and additional analog function ADC12_IN14."+      },+      {+        "number": "34",+        "name": "PC5",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PC5 with alternate functions ETH_RMII_RXD1, ETH_MII_RXD1, EVENTOUT and additional analog function ADC12_IN15."+      },+      {+        "number": "35",+        "name": "PB0",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PB0 with alternate functions TIM3_CH3, TIM8_CH2N, OTG_HS_ULPI_D1, ETH_MII_RXD2, TIM1_CH2N, EVENTOUT and additional analog function ADC12_IN8."+      },+      {+        "number": "36",+        "name": "PB1",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PB1 with alternate functions TIM3_CH4, TIM8_CH3N, OTG_HS_ULPI_D2, ETH_MII_RXD3, TIM1_CH3N, EVENTOUT and additional analog function ADC12_IN9."+      },+      {+        "number": "37",+        "name": "PB2-BOOT1",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PB2, dual-function boot pin (BOOT1) with EVENTOUT alternate function."+      },+      {+        "number": "38",+        "name": "PE7",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PE7 with alternate functions FSMC_D4, TIM1_ETR, EVENTOUT."+      },+      {+        "number": "39",+        "name": "PE8",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PE8 with alternate functions FSMC_D5, TIM1_CH1N, EVENTOUT."+      },+      {+        "number": "40",+        "name": "PE9",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PE9 with alternate functions FSMC_D6, TIM1_CH1, EVENTOUT."+      },+      {+        "number": "41",+        "name": "PE10",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PE10 with alternate functions FSMC_D7, TIM1_CH2N, EVENTOUT."+      },+      {+        "number": "42",+        "name": "PE11",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PE11 with alternate functions FSMC_D8, TIM1_CH2, EVENTOUT."+      },+      {+        "number": "43",+        "name": "PE12",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PE12 with alternate functions FSMC_D9, TIM1_CH3N, EVENTOUT."+      },+      {+        "number": "44",+        "name": "PE13",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PE13 with alternate functions FSMC_D10, TIM1_CH3, EVENTOUT."+      },+      {+        "number": "45",+        "name": "PE14",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PE14 with alternate functions FSMC_D11, TIM1_CH4, EVENTOUT."+      },+      {+        "number": "46",+        "name": "PE15",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PE15 with alternate functions FSMC_D12, TIM1_BKIN, EVENTOUT."+      },+      {+        "number": "47",+        "name": "PB10",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PB10 with alternate functions SPI2_SCK, I2S2_SCK, I2C2_SCL, USART3_TX, OTG_HS_ULPI_D3, ETH_MII_RX_ER, TIM2_CH3, EVENTOUT."+      },+      {+        "number": "48",+        "name": "PB11",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PB11 with alternate functions I2C2_SDA, USART3_RX, OTG_HS_ULPI_D4, ETH_RMII_TX_EN, ETH_MII_TX_EN, TIM2_CH4, EVENTOUT."+      },+      {+        "number": "49",+        "name": "VCAP_1",+        "type": "power_in",+        "description": "Voltage regulator internal decoupling supply pin, requires an external capacitor per Section 6.3.2 (VCAP1/VCAP2 external capacitor) specifications."+      },+      {+        "number": "50",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital supply pin, 1.8 to 3.6 V application supply and I/O supply."+      },+      {+        "number": "51",+        "name": "PB12",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PB12 with alternate functions SPI2_NSS, I2S2_WS, I2C2_SMBA, USART3_CK, TIM1_BKIN, CAN2_RX, OTG_HS_ULPI_D5, ETH_RMII_TXD0, ETH_MII_TXD0, OTG_HS_ID, EVENTOUT."+      },+      {+        "number": "52",+        "name": "PB13",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PB13 with alternate functions SPI2_SCK, I2S2_SCK, USART3_CTS, TIM1_CH1N, CAN2_TX, OTG_HS_ULPI_D6, ETH_RMII_TXD1, ETH_MII_TXD1, EVENTOUT and additional function OTG_HS_VBUS."+      },+      {+        "number": "53",+        "name": "PB14",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PB14 with alternate functions SPI2_MISO, TIM1_CH2N, TIM12_CH1, OTG_HS_DM, USART3_RTS, TIM8_CH2N, EVENTOUT."+      },+      {+        "number": "54",+        "name": "PB15",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PB15 with alternate functions SPI2_MOSI, I2S2_SD, TIM1_CH3N, TIM8_CH3N, TIM12_CH2, OTG_HS_DP, RTC_50Hz, EVENTOUT."+      },+      {+        "number": "55",+        "name": "PD8",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PD8 with alternate functions FSMC_D13, USART3_TX, EVENTOUT."+      },+      {+        "number": "56",+        "name": "PD9",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PD9 with alternate functions FSMC_D14, USART3_RX, EVENTOUT."+      },+      {+        "number": "57",+        "name": "PD10",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PD10 with alternate functions FSMC_D15, USART3_CK, EVENTOUT."+      },+      {+        "number": "58",+        "name": "PD11",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PD11 with alternate functions FSMC_A16, USART3_CTS, EVENTOUT."+      },+      {+        "number": "59",+        "name": "PD12",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PD12 with alternate functions FSMC_A17, TIM4_CH1, USART3_RTS, EVENTOUT."+      },+      {+        "number": "60",+        "name": "PD13",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PD13 with alternate functions FSMC_A18, TIM4_CH2, EVENTOUT."+      },+      {+        "number": "61",+        "name": "PD14",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PD14 with alternate functions FSMC_D0, TIM4_CH3, EVENTOUT."+      },+      {+        "number": "62",+        "name": "PD15",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PD15 with alternate functions FSMC_D1, TIM4_CH4, EVENTOUT."+      },+      {+        "number": "63",+        "name": "PC6",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PC6 with alternate functions I2S2_MCK, TIM8_CH1, SDIO_D6, USART6_TX, DCMI_D0, TIM3_CH1, EVENTOUT."+      },+      {+        "number": "64",+        "name": "PC7",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PC7 with alternate functions I2S3_MCK, TIM8_CH2, SDIO_D7, USART6_RX, DCMI_D1, TIM3_CH2, EVENTOUT."+      },+      {+        "number": "65",+        "name": "PC8",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PC8 with alternate functions TIM8_CH3, SDIO_D0, TIM3_CH3, USART6_CK, DCMI_D2, EVENTOUT."+      },+      {+        "number": "66",+        "name": "PC9",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PC9 with alternate functions I2S2_CKIN, I2S3_CKIN, MCO2, TIM8_CH4, SDIO_D1, I2C3_SDA, DCMI_D3, TIM3_CH4, EVENTOUT."+      },+      {+        "number": "67",+        "name": "PA8",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PA8 with alternate functions MCO1, USART1_CK, TIM1_CH1, I2C3_SCL, OTG_FS_SOF, EVENTOUT."+      },+      {+        "number": "68",+        "name": "PA9",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PA9 with alternate functions USART1_TX, TIM1_CH2, I2C3_SMBA, DCMI_D0, EVENTOUT and additional function OTG_FS_VBUS."+      },+      {+        "number": "69",+        "name": "PA10",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PA10 with alternate functions USART1_RX, TIM1_CH3, OTG_FS_ID, DCMI_D1, EVENTOUT."+      },+      {+        "number": "70",+        "name": "PA11",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PA11 with alternate functions USART1_CTS, CAN1_RX, TIM1_CH4, OTG_FS_DM, EVENTOUT."+      },+      {+        "number": "71",+        "name": "PA12",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PA12 with alternate functions USART1_RTS, CAN1_TX, TIM1_ETR, OTG_FS_DP, EVENTOUT."+      },+      {+        "number": "72",+        "name": "PA13",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PA13, default function after reset is JTMS-SWDIO (SWJ-DP debug), also EVENTOUT alternate function."+      },+      {+        "number": "73",+        "name": "VCAP_2",+        "type": "power_in",+        "description": "Voltage regulator internal decoupling supply pin, requires an external capacitor per Section 6.3.2 (VCAP1/VCAP2 external capacitor) specifications."+      },+      {+        "number": "74",+        "name": "VSS",+        "type": "power_in",+        "description": "Digital ground supply pin."+      },+      {+        "number": "75",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital supply pin, 1.8 to 3.6 V application supply and I/O supply."+      },+      {+        "number": "76",+        "name": "PA14",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PA14, default function after reset is JTCK-SWCLK (SWJ-DP debug clock), also EVENTOUT alternate function."+      },+      {+        "number": "77",+        "name": "PA15",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PA15, default function after reset is JTDI, also alternate functions SPI3_NSS, I2S3_WS, TIM2_CH1_ETR, SPI1_NSS, EVENTOUT."+      },+      {+        "number": "78",+        "name": "PC10",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PC10 with alternate functions SPI3_SCK, I2S3_SCK, UART4_TX, SDIO_D2, DCMI_D8, USART3_TX, EVENTOUT."+      },+      {+        "number": "79",+        "name": "PC11",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PC11 with alternate functions UART4_RX, SPI3_MISO, SDIO_D3, DCMI_D4, USART3_RX, EVENTOUT."+      },+      {+        "number": "80",+        "name": "PC12",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PC12 with alternate functions UART5_TX, SDIO_CK, DCMI_D9, SPI3_MOSI, I2S3_SD, USART3_CK, EVENTOUT."+      },+      {+        "number": "81",+        "name": "PD0",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PD0 with alternate functions FSMC_D2, CAN1_RX, EVENTOUT."+      },+      {+        "number": "82",+        "name": "PD1",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PD1 with alternate functions FSMC_D3, CAN1_TX, EVENTOUT."+      },+      {+        "number": "83",+        "name": "PD2",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PD2 with alternate functions TIM3_ETR, UART5_RX, SDIO_CMD, DCMI_D11, EVENTOUT."+      },+      {+        "number": "84",+        "name": "PD3",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PD3 with alternate functions FSMC_CLK, USART2_CTS, EVENTOUT."+      },+      {+        "number": "85",+        "name": "PD4",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PD4 with alternate functions FSMC_NOE, USART2_RTS, EVENTOUT."+      },+      {+        "number": "86",+        "name": "PD5",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PD5 with alternate functions FSMC_NWE, USART2_TX, EVENTOUT."+      },+      {+        "number": "87",+        "name": "PD6",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PD6 with alternate functions FSMC_NWAIT, USART2_RX, EVENTOUT."+      },+      {+        "number": "88",+        "name": "PD7",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PD7 with alternate functions USART2_CK, FSMC_NE1, FSMC_NCE2, EVENTOUT."+      },+      {+        "number": "89",+        "name": "PB3",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PB3, default function after reset is JTDO/TRACESWO, also alternate functions SPI3_SCK, I2S3_SCK, TIM2_CH2, SPI1_SCK, EVENTOUT."+      },+      {+        "number": "90",+        "name": "PB4",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PB4, default function after reset is NJTRST, also alternate functions SPI3_MISO, TIM3_CH1, SPI1_MISO, EVENTOUT."+      },+      {+        "number": "91",+        "name": "PB5",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PB5 with alternate functions I2C1_SMBA, CAN2_RX, OTG_HS_ULPI_D7, ETH_PPS_OUT, TIM3_CH2, SPI1_MOSI, SPI3_MOSI, DCMI_D10, I2S3_SD, EVENTOUT."+      },+      {+        "number": "92",+        "name": "PB6",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PB6 with alternate functions I2C1_SCL, TIM4_CH1, CAN2_TX, DCMI_D5, USART1_TX, EVENTOUT."+      },+      {+        "number": "93",+        "name": "PB7",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PB7 with alternate functions I2C1_SDA, FSMC_NL (FSMC_NADV), DCMI_VSYNC, USART1_RX, TIM4_CH2, EVENTOUT."+      },+      {+        "number": "94",+        "name": "BOOT0",+        "type": "input",+        "description": "Dedicated boot mode selection input pin (also usable as VPP Flash programming voltage) that, together with BOOT1, selects the boot memory at reset."+      },+      {+        "number": "95",+        "name": "PB8",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PB8 with alternate functions TIM4_CH3, SDIO_D4, TIM10_CH1, DCMI_D6, ETH_MII_TXD3, I2C1_SCL, CAN1_RX, EVENTOUT."+      },+      {+        "number": "96",+        "name": "PB9",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PB9 with alternate functions SPI2_NSS, I2S2_WS, TIM4_CH4, TIM11_CH1, SDIO_D5, DCMI_D7, I2C1_SDA, CAN1_TX, EVENTOUT."+      },+      {+        "number": "97",+        "name": "PE0",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PE0 with alternate functions TIM4_ETR, FSMC_NBL0, DCMI_D2, EVENTOUT."+      },+      {+        "number": "98",+        "name": "PE1",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO PE1 with alternate functions FSMC_NBL1, DCMI_D3, EVENTOUT."+      },+      {+        "number": "99",+        "name": "RFU",+        "type": "unconnected",+        "description": "Reserved for future use pin; may be tied to VDD, tied to VSS, or left unconnected per datasheet note."+      },+      {+        "number": "100",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital supply pin, 1.8 to 3.6 V application supply and I/O supply."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 57,+        "cost_usd": 1.1308,+        "at": "2026-09-23T23:16:41"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586182262567788544",+        "pages": 179,+        "sha256": "6ffebd41462b5c10",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 100,+        "described": 100,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file