component
STM32F103RET6
Public Made by Adomby adom
STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-64(10x10). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
← Commit history
orderable attributes: rebuild .lbr with adom-lbr 2.18.0 so MPN, MANUFACTURER and the distributor part numbers reach <technology> (DIGIKEY_PN 497-6444-ND, LCSC_PN C8322). The published library carried no attributes at all, so a BOM had nothing to buy from. Distributor PNs matched on exact MPN AND corroborating manufacturer.
2 files changed
+27−5
page.json+6−3@@ -26,7 +26,10 @@ "model_3d_step": "stm32f103ret6.step", "lbr": "stm32f103ret6.lbr" },- "distributor_links": {},+ "distributor_links": {+ "digikey": "497-6444-ND",+ "lcsc": "C8322"+ }, "pins": [ { "number": "1",@@ -38,7 +41,7 @@ "number": "2", "name": "PC13-TAMPER-RTC", "type": "bidirectional",- "description": "GPIO port C bit 13; alternate function TAMPER-RTC (RTC tamper detect / RTC alarm out). Supplied through the VBAT power switch, so use in output mode is limited to 2 MHz with ≤30 pF and cannot source significant current."+ "description": "GPIO port C bit 13; alternate function TAMPER-RTC (RTC tamper detect / RTC alarm out). Supplied through the VBAT power switch, so use in output mode is limited to 2 MHz with \u226430 pF and cannot source significant current." }, { "number": "3",@@ -68,7 +71,7 @@ "number": "7", "name": "NRST", "type": "bidirectional",- "description": "Active-low bidirectional device reset input/open-drain output with internal pull-up. Drive low for ≥20 µs to reset the MCU."+ "description": "Active-low bidirectional device reset input/open-drain output with internal pull-up. Drive low for \u226520 \u00b5s to reset the MCU." }, { "number": "8",
stm32f103ret6.lbr+21−2@@ -118,6 +118,18 @@ <smd name="62" x="-2.7500" y="5.6750" dx="0.3000" dy="1.5500" layer="1"/> <smd name="63" x="-3.2500" y="5.6750" dx="0.3000" dy="1.5500" layer="1"/> <smd name="64" x="-3.7500" y="5.6750" dx="0.3000" dy="1.5500" layer="1"/>+ <polygon width="0.1200" layer="21">+ <vertex x="-5.7500" y="4.1600"/>+ <vertex x="-6.0900" y="4.6300"/>+ <vertex x="-5.4100" y="4.6300"/>+ </polygon>+ <polygon width="0.1000" layer="51">+ <vertex x="-4.0000" y="5.0000"/>+ <vertex x="5.0000" y="5.0000"/>+ <vertex x="5.0000" y="-5.0000"/>+ <vertex x="-5.0000" y="-5.0000"/>+ <vertex x="-5.0000" y="4.0000"/>+ </polygon> <wire x1="-5.1100" y1="5.1100" x2="-4.1600" y2="5.1100" width="0.1200" layer="21"/> <wire x1="-5.1100" y1="4.1600" x2="-5.1100" y2="5.1100" width="0.1200" layer="21"/> <wire x1="-5.1100" y1="-5.1100" x2="-5.1100" y2="-4.1600" width="0.1200" layer="21"/>@@ -128,7 +140,7 @@ <wire x1="5.1100" y1="-5.1100" x2="4.1600" y2="-5.1100" width="0.1200" layer="21"/> <text x="0" y="7.050" size="1.27" layer="25" align="bottom-center">>NAME</text> <text x="0" y="-7.050" size="1.27" layer="27" align="top-center">>VALUE</text>-<!--adom-pin1--><polygon width="0.0500" layer="21"><vertex x="-5.7500" y="4.1600"/><vertex x="-6.0900" y="4.6300"/><vertex x="-5.4100" y="4.6300"/></polygon></package>+</package> </packages> <symbols> <symbol name="STM32F103RET6">@@ -278,7 +290,14 @@ <connect gate="G$1" pin="PB13" pad="34"/> <connect gate="G$1" pin="PB12" pad="33"/> </connects>- <technologies><technology name=""/></technologies>+ <technologies>+ <technology name="">+ <attribute name="MPN" value="STM32F103RET6" constant="no"/>+ <attribute name="MANUFACTURER" value="STMicroelectronics" constant="no"/>+ <attribute name="DIGIKEY_PN" value="497-6444-ND" constant="no"/>+ <attribute name="LCSC_PN" value="C8322" constant="no"/>+ </technology>+ </technologies> </device> </devices> </deviceset>