component
STM32F103RDT6
Public Made by Adomby adom
STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-64(10x10). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+100@@ -0,0 +1,100 @@+# STM32F103RDT6++**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · LQFP-64(10x10)++STM32F103RDT6 from STMicroelectronics, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VBAT | power_in | Backup battery supply for RTC, external clock 32 kHz oscillator and backup registers; 1.8 to 3.6 V. |+| 2 | PC13-TAMPER-RTC | bidirectional | General-purpose I/O or tamper/RTC alarm output; 3.3V I/O with limited current capability (3 mA max). |+| 3 | PC14-OSC32_IN | input | 32.768 kHz crystal oscillator input or general-purpose I/O. |+| 4 | PC15-OSC32_OUT | output | 32.768 kHz crystal oscillator output or general-purpose I/O. |+| 5 | PD0 | bidirectional | General-purpose I/O; 5V tolerant; default OSC_IN or remapped as FSMC_D2/CAN_RX. |+| 6 | PD1 | bidirectional | General-purpose I/O; 5V tolerant; default OSC_OUT or remapped as FSMC_D3/CAN_TX. |+| 7 | NRST | bidirectional | Active low external reset input with internal pull-up and filter; typical reset threshold 0.8V max. |+| 8 | PC0 | bidirectional | General-purpose I/O or ADC123_IN10 analog input channel. |+| 9 | PC1 | bidirectional | General-purpose I/O or ADC123_IN11 analog input channel. |+| 10 | PC2 | bidirectional | General-purpose I/O or ADC123_IN12 analog input channel. |+| 11 | PC3 | bidirectional | General-purpose I/O or ADC123_IN13 analog input channel. |+| 12 | VSSA | power_in | Analog ground for ADC, DAC, reset blocks and internal oscillators; must be connected to VSS. |+| 13 | VDDA | power_in | Analog power supply for ADC, DAC and internal oscillators; 2.4 to 3.6 V when ADC/DAC used. |+| 14 | PA0-WKUP | bidirectional | General-purpose I/O or wakeup signal with pull-down; ADC123_IN0; TIM2_CH1_ETR/TIM5_CH1. |+| 15 | PA1 | bidirectional | General-purpose I/O; ADC123_IN1; USART2_RTS or TIM5_CH2/TIM2_CH2. |+| 16 | PA2 | bidirectional | General-purpose I/O; ADC123_IN2; USART2_TX or TIM5_CH3/TIM2_CH3. |+| 17 | PA3 | bidirectional | General-purpose I/O; ADC123_IN3; USART2_RX or TIM5_CH4/TIM2_CH4. |+| 18 | VSS_4 | power_in | Ground connection. |+| 19 | VDD_4 | power_in | Main power supply; 2.0 to 3.6 V. |+| 20 | PA4 | bidirectional | General-purpose I/O; DAC_OUT1; ADC12_IN4; SPI1_NSS or USART2_CK. |+| 21 | PA5 | bidirectional | General-purpose I/O; DAC_OUT2; ADC12_IN5; SPI1_SCK. |+| 22 | PA6 | bidirectional | General-purpose I/O; ADC12_IN6; SPI1_MISO or TIM3_CH1/TIM8_BKIN/TIM1_BKIN. |+| 23 | PA7 | bidirectional | General-purpose I/O; ADC12_IN7; SPI1_MOSI or TIM3_CH2/TIM8_CH1N/TIM1_CH1N. |+| 24 | PC4 | bidirectional | General-purpose I/O; ADC12_IN14. |+| 25 | PC5 | bidirectional | General-purpose I/O; ADC12_IN15. |+| 26 | PB0 | bidirectional | General-purpose I/O; ADC12_IN8; TIM3_CH3 or TIM8_CH2N/TIM1_CH2N. |+| 27 | PB1 | bidirectional | General-purpose I/O; ADC12_IN9; TIM3_CH4 or TIM8_CH3N/TIM1_CH3N. |+| 28 | PB2 | bidirectional | General-purpose I/O or BOOT1 mode selection; 5V tolerant. |+| 29 | VSS_1 | power_in | Ground connection. |+| 30 | VDD_1 | power_in | Main power supply; 2.0 to 3.6 V. |+| 31 | PB10 | bidirectional | General-purpose I/O; 5V tolerant; I2C2_SCL or USART3_TX/TIM2_CH3; UART4_TX or SDIO_D2. |+| 32 | PB11 | bidirectional | General-purpose I/O; 5V tolerant; I2C2_SDA or USART3_RX/TIM2_CH4; UART4_RX or SDIO_D3. |+| 33 | VSS_2 | power_in | Ground connection. |+| 34 | VDD_2 | power_in | Main power supply; 2.0 to 3.6 V. |+| 35 | PA13 | bidirectional | JTAG/SWDIO debug interface pin; 5V tolerant; general-purpose I/O after reconfiguration. |+| 36 | PA12 | bidirectional | General-purpose I/O; 5V tolerant; USART1_RTS/USBDP/CAN_TX/TIM1_ETR. |+| 37 | PA11 | bidirectional | General-purpose I/O; 5V tolerant; USART1_CTS/USBDM/CAN_RX/TIM1_CH4. |+| 38 | PA10 | bidirectional | General-purpose I/O; 5V tolerant; USART1_RX or TIM1_CH3. |+| 39 | PA9 | bidirectional | General-purpose I/O; 5V tolerant; USART1_TX or TIM1_CH2. |+| 40 | PA8 | bidirectional | General-purpose I/O; 5V tolerant; USART1_CK/TIM1_CH1/MCO. |+| 41 | PC9 | bidirectional | General-purpose I/O; 5V tolerant; TIM8_CH4/SDIO_D1 or TIM3_CH4. |+| 42 | PC8 | bidirectional | General-purpose I/O; 5V tolerant; TIM8_CH3/SDIO_D0 or TIM3_CH3. |+| 43 | PC7 | bidirectional | General-purpose I/O; 5V tolerant; I2S3_MCK/TIM8_CH2/SDIO_D7 or TIM3_CH2. |+| 44 | PC6 | bidirectional | General-purpose I/O; 5V tolerant; I2S2_MCK/TIM8_CH1/SDIO_D6 or TIM3_CH1. |+| 45 | PB15 | bidirectional | General-purpose I/O; 5V tolerant; SPI2_MOSI/I2S2_SD or TIM1_CH3N. |+| 46 | PB14 | bidirectional | General-purpose I/O; 5V tolerant; SPI2_MISO or TIM1_CH2N/USART3_RTS. |+| 47 | PB13 | bidirectional | General-purpose I/O; 5V tolerant; SPI2_SCK/I2S2_CK or USART3_CTS/TIM1_CH1N. |+| 48 | PB12 | bidirectional | General-purpose I/O; 5V tolerant; SPI2_NSS/I2S2_WS/I2C2_SMBA/USART3_CK or TIM1_BKIN. |+| 49 | PD2 | bidirectional | General-purpose I/O; 5V tolerant; TIM3_ETR/UART5_RX/SDIO_CMD. |+| 50 | PC12 | bidirectional | General-purpose I/O; 5V tolerant; UART5_TX/SDIO_CK or USART3_CK. |+| 51 | PC11 | bidirectional | General-purpose I/O; 5V tolerant; UART4_RX/SDIO_D3 or USART3_RX. |+| 52 | PC10 | bidirectional | General-purpose I/O; 5V tolerant; UART4_TX/SDIO_D2 or USART3_TX. |+| 53 | PA15 | bidirectional | JTAG/SPI NSS debug interface pin; 5V tolerant; SPI3_NSS/I2S3_WS or TIM2_CH1_ETR/SPI1_NSS. |+| 54 | PA14 | bidirectional | JTAG/SWCLK debug interface pin; 5V tolerant; general-purpose I/O after reconfiguration. |+| 55 | VSS_3 | power_in | Ground connection. |+| 56 | VDD_3 | power_in | Main power supply; 2.0 to 3.6 V. |+| 57 | PB9 | bidirectional | General-purpose I/O; 5V tolerant; TIM4_CH4/SDIO_D5 or I2C1_SDA/CAN_TX. |+| 58 | PB8 | bidirectional | General-purpose I/O; 5V tolerant; TIM4_CH3/SDIO_D4 or I2C1_SCL/CAN_RX. |+| 59 | BOOT0 | input | Boot mode selection pin for application boot from Flash (low) or system memory (high); sampled at reset. |+| 60 | PB7 | bidirectional | General-purpose I/O; 5V tolerant; I2C1_SDA/FSMC_NADV/TIM4_CH2 or USART1_RX. |+| 61 | PB6 | bidirectional | General-purpose I/O; 5V tolerant; I2C1_SCL or TIM4_CH1/USART1_TX. |+| 62 | PB5 | bidirectional | General-purpose I/O; I2C1_SMBA/SPI3_MOSI/I2S3_SD or TIM3_CH2/SPI1_MOSI. |+| 63 | PB4 | bidirectional | General-purpose I/O; 5V tolerant; NJTRST debug pin or SPI3_MISO/PB4/TIM3_CH1/SPI1_MISO. |+| 64 | PB3 | bidirectional | General-purpose I/O; 5V tolerant; JTAG/TRACESWO debug pin or SPI3_SCK/I2S3_CK/TIM2_CH2/SPI1_SCK. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | LQFP-64(10x10) |+| Category | Embedded Processors & Controllers |+| Pins | 64 |++## CAD (KiCad official)++- Symbol: `STM32F103RDT6`+- Footprint: `Package_QFP:LQFP-64_10x10mm_P0.5mm`+- 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)+- 3D model files: `stm32f103rdt6-etched.step` / `stm32f103rdt6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32f103rdt6.step` / `stm32f103rdt6.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586181490829111296) (130 pp, sha256 `6cc345d224870bff`, retrieved 2026-09-24, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm32f103rdt6-datasheet.pdf)
page.jsonadded+464@@ -0,0 +1,464 @@+{+ "slug": "stm32f103rdt6",+ "version": "0.1.0",+ "type": "component",+ "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-64(10x10). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "embedded processors & controllers",+ "stm32f103rdt6",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "stm32f103rdt6.kicad_sym",+ "stm32f103rdt6.kicad_mod",+ "stm32f103rdt6.glb",+ "stm32f103rdt6.step",+ "stm32f103rdt6.lbr",+ "docs/hero.png",+ "docs/stm32f103rdt6-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "STM32F103RDT6",+ "manufacturer": "STMicroelectronics",+ "package": "LQFP-64(10x10)",+ "pin_count": 64,+ "category": "Embedded Processors & Controllers",+ "subcategory": "Microcontrollers (MCU/MPU/SOC)",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586181490829111296",+ "parts": {+ "symbol": "stm32f103rdt6.kicad_sym",+ "footprint": "stm32f103rdt6.kicad_mod",+ "model_3d": "stm32f103rdt6-etched.glb",+ "model_3d_plain": "stm32f103rdt6.glb",+ "model_3d_step": "stm32f103rdt6-etched.step",+ "model_3d_step_plain": "stm32f103rdt6.step",+ "lbr": "stm32f103rdt6.lbr"+ },+ "distributor_links": {+ "lcsc": "C88435"+ },+ "pins": [+ {+ "number": "1",+ "name": "VBAT",+ "type": "power_in",+ "description": "Backup battery supply for RTC, external clock 32 kHz oscillator and backup registers; 1.8 to 3.6 V."+ },+ {+ "number": "2",+ "name": "PC13-TAMPER-RTC",+ "type": "bidirectional",+ "description": "General-purpose I/O or tamper/RTC alarm output; 3.3V I/O with limited current capability (3 mA max)."+ },+ {+ "number": "3",+ "name": "PC14-OSC32_IN",+ "type": "input",+ "description": "32.768 kHz crystal oscillator input or general-purpose I/O."+ },+ {+ "number": "4",+ "name": "PC15-OSC32_OUT",+ "type": "output",+ "description": "32.768 kHz crystal oscillator output or general-purpose I/O."+ },+ {+ "number": "5",+ "name": "PD0",+ "type": "bidirectional",+ "description": "General-purpose I/O; 5V tolerant; default OSC_IN or remapped as FSMC_D2/CAN_RX."+ },+ {+ "number": "6",+ "name": "PD1",+ "type": "bidirectional",+ "description": "General-purpose I/O; 5V tolerant; default OSC_OUT or remapped as FSMC_D3/CAN_TX."+ },+ {+ "number": "7",+ "name": "NRST",+ "type": "bidirectional",+ "description": "Active low external reset input with internal pull-up and filter; typical reset threshold 0.8V max."+ },+ {+ "number": "8",+ "name": "PC0",+ "type": "bidirectional",+ "description": "General-purpose I/O or ADC123_IN10 analog input channel."+ },+ {+ "number": "9",+ "name": "PC1",+ "type": "bidirectional",+ "description": "General-purpose I/O or ADC123_IN11 analog input channel."+ },+ {+ "number": "10",+ "name": "PC2",+ "type": "bidirectional",+ "description": "General-purpose I/O or ADC123_IN12 analog input channel."+ },+ {+ "number": "11",+ "name": "PC3",+ "type": "bidirectional",+ "description": "General-purpose I/O or ADC123_IN13 analog input channel."+ },+ {+ "number": "12",+ "name": "VSSA",+ "type": "power_in",+ "description": "Analog ground for ADC, DAC, reset blocks and internal oscillators; must be connected to VSS."+ },+ {+ "number": "13",+ "name": "VDDA",+ "type": "power_in",+ "description": "Analog power supply for ADC, DAC and internal oscillators; 2.4 to 3.6 V when ADC/DAC used."+ },+ {+ "number": "14",+ "name": "PA0-WKUP",+ "type": "bidirectional",+ "description": "General-purpose I/O or wakeup signal with pull-down; ADC123_IN0; TIM2_CH1_ETR/TIM5_CH1."+ },+ {+ "number": "15",+ "name": "PA1",+ "type": "bidirectional",+ "description": "General-purpose I/O; ADC123_IN1; USART2_RTS or TIM5_CH2/TIM2_CH2."+ },+ {+ "number": "16",+ "name": "PA2",+ "type": "bidirectional",+ "description": "General-purpose I/O; ADC123_IN2; USART2_TX or TIM5_CH3/TIM2_CH3."+ },+ {+ "number": "17",+ "name": "PA3",+ "type": "bidirectional",+ "description": "General-purpose I/O; ADC123_IN3; USART2_RX or TIM5_CH4/TIM2_CH4."+ },+ {+ "number": "18",+ "name": "VSS_4",+ "type": "power_in",+ "description": "Ground connection."+ },+ {+ "number": "19",+ "name": "VDD_4",+ "type": "power_in",+ "description": "Main power supply; 2.0 to 3.6 V."+ },+ {+ "number": "20",+ "name": "PA4",+ "type": "bidirectional",+ "description": "General-purpose I/O; DAC_OUT1; ADC12_IN4; SPI1_NSS or USART2_CK."+ },+ {+ "number": "21",+ "name": "PA5",+ "type": "bidirectional",+ "description": "General-purpose I/O; DAC_OUT2; ADC12_IN5; SPI1_SCK."+ },+ {+ "number": "22",+ "name": "PA6",+ "type": "bidirectional",+ "description": "General-purpose I/O; ADC12_IN6; SPI1_MISO or TIM3_CH1/TIM8_BKIN/TIM1_BKIN."+ },+ {+ "number": "23",+ "name": "PA7",+ "type": "bidirectional",+ "description": "General-purpose I/O; ADC12_IN7; SPI1_MOSI or TIM3_CH2/TIM8_CH1N/TIM1_CH1N."+ },+ {+ "number": "24",+ "name": "PC4",+ "type": "bidirectional",+ "description": "General-purpose I/O; ADC12_IN14."+ },+ {+ "number": "25",+ "name": "PC5",+ "type": "bidirectional",+ "description": "General-purpose I/O; ADC12_IN15."+ },+ {+ "number": "26",+ "name": "PB0",+ "type": "bidirectional",+ "description": "General-purpose I/O; ADC12_IN8; TIM3_CH3 or TIM8_CH2N/TIM1_CH2N."+ },+ {+ "number": "27",+ "name": "PB1",+ "type": "bidirectional",+ "description": "General-purpose I/O; ADC12_IN9; TIM3_CH4 or TIM8_CH3N/TIM1_CH3N."+ },+ {+ "number": "28",+ "name": "PB2",+ "type": "bidirectional",+ "description": "General-purpose I/O or BOOT1 mode selection; 5V tolerant."+ },+ {+ "number": "29",+ "name": "VSS_1",+ "type": "power_in",+ "description": "Ground connection."+ },+ {+ "number": "30",+ "name": "VDD_1",+ "type": "power_in",+ "description": "Main power supply; 2.0 to 3.6 V."+ },+ {+ "number": "31",+ "name": "PB10",+ "type": "bidirectional",+ "description": "General-purpose I/O; 5V tolerant; I2C2_SCL or USART3_TX/TIM2_CH3; UART4_TX or SDIO_D2."+ },+ {+ "number": "32",+ "name": "PB11",+ "type": "bidirectional",+ "description": "General-purpose I/O; 5V tolerant; I2C2_SDA or USART3_RX/TIM2_CH4; UART4_RX or SDIO_D3."+ },+ {+ "number": "33",+ "name": "VSS_2",+ "type": "power_in",+ "description": "Ground connection."+ },+ {+ "number": "34",+ "name": "VDD_2",+ "type": "power_in",+ "description": "Main power supply; 2.0 to 3.6 V."+ },+ {+ "number": "35",+ "name": "PA13",+ "type": "bidirectional",+ "description": "JTAG/SWDIO debug interface pin; 5V tolerant; general-purpose I/O after reconfiguration."+ },+ {+ "number": "36",+ "name": "PA12",+ "type": "bidirectional",+ "description": "General-purpose I/O; 5V tolerant; USART1_RTS/USBDP/CAN_TX/TIM1_ETR."+ },+ {+ "number": "37",+ "name": "PA11",+ "type": "bidirectional",+ "description": "General-purpose I/O; 5V tolerant; USART1_CTS/USBDM/CAN_RX/TIM1_CH4."+ },+ {+ "number": "38",+ "name": "PA10",+ "type": "bidirectional",+ "description": "General-purpose I/O; 5V tolerant; USART1_RX or TIM1_CH3."+ },+ {+ "number": "39",+ "name": "PA9",+ "type": "bidirectional",+ "description": "General-purpose I/O; 5V tolerant; USART1_TX or TIM1_CH2."+ },+ {+ "number": "40",+ "name": "PA8",+ "type": "bidirectional",+ "description": "General-purpose I/O; 5V tolerant; USART1_CK/TIM1_CH1/MCO."+ },+ {+ "number": "41",+ "name": "PC9",+ "type": "bidirectional",+ "description": "General-purpose I/O; 5V tolerant; TIM8_CH4/SDIO_D1 or TIM3_CH4."+ },+ {+ "number": "42",+ "name": "PC8",+ "type": "bidirectional",+ "description": "General-purpose I/O; 5V tolerant; TIM8_CH3/SDIO_D0 or TIM3_CH3."+ },+ {+ "number": "43",+ "name": "PC7",+ "type": "bidirectional",+ "description": "General-purpose I/O; 5V tolerant; I2S3_MCK/TIM8_CH2/SDIO_D7 or TIM3_CH2."+ },+ {+ "number": "44",+ "name": "PC6",+ "type": "bidirectional",+ "description": "General-purpose I/O; 5V tolerant; I2S2_MCK/TIM8_CH1/SDIO_D6 or TIM3_CH1."+ },+ {+ "number": "45",+ "name": "PB15",+ "type": "bidirectional",+ "description": "General-purpose I/O; 5V tolerant; SPI2_MOSI/I2S2_SD or TIM1_CH3N."+ },+ {+ "number": "46",+ "name": "PB14",+ "type": "bidirectional",+ "description": "General-purpose I/O; 5V tolerant; SPI2_MISO or TIM1_CH2N/USART3_RTS."+ },+ {+ "number": "47",+ "name": "PB13",+ "type": "bidirectional",+ "description": "General-purpose I/O; 5V tolerant; SPI2_SCK/I2S2_CK or USART3_CTS/TIM1_CH1N."+ },+ {+ "number": "48",+ "name": "PB12",+ "type": "bidirectional",+ "description": "General-purpose I/O; 5V tolerant; SPI2_NSS/I2S2_WS/I2C2_SMBA/USART3_CK or TIM1_BKIN."+ },+ {+ "number": "49",+ "name": "PD2",+ "type": "bidirectional",+ "description": "General-purpose I/O; 5V tolerant; TIM3_ETR/UART5_RX/SDIO_CMD."+ },+ {+ "number": "50",+ "name": "PC12",+ "type": "bidirectional",+ "description": "General-purpose I/O; 5V tolerant; UART5_TX/SDIO_CK or USART3_CK."+ },+ {+ "number": "51",+ "name": "PC11",+ "type": "bidirectional",+ "description": "General-purpose I/O; 5V tolerant; UART4_RX/SDIO_D3 or USART3_RX."+ },+ {+ "number": "52",+ "name": "PC10",+ "type": "bidirectional",+ "description": "General-purpose I/O; 5V tolerant; UART4_TX/SDIO_D2 or USART3_TX."+ },+ {+ "number": "53",+ "name": "PA15",+ "type": "bidirectional",+ "description": "JTAG/SPI NSS debug interface pin; 5V tolerant; SPI3_NSS/I2S3_WS or TIM2_CH1_ETR/SPI1_NSS."+ },+ {+ "number": "54",+ "name": "PA14",+ "type": "bidirectional",+ "description": "JTAG/SWCLK debug interface pin; 5V tolerant; general-purpose I/O after reconfiguration."+ },+ {+ "number": "55",+ "name": "VSS_3",+ "type": "power_in",+ "description": "Ground connection."+ },+ {+ "number": "56",+ "name": "VDD_3",+ "type": "power_in",+ "description": "Main power supply; 2.0 to 3.6 V."+ },+ {+ "number": "57",+ "name": "PB9",+ "type": "bidirectional",+ "description": "General-purpose I/O; 5V tolerant; TIM4_CH4/SDIO_D5 or I2C1_SDA/CAN_TX."+ },+ {+ "number": "58",+ "name": "PB8",+ "type": "bidirectional",+ "description": "General-purpose I/O; 5V tolerant; TIM4_CH3/SDIO_D4 or I2C1_SCL/CAN_RX."+ },+ {+ "number": "59",+ "name": "BOOT0",+ "type": "input",+ "description": "Boot mode selection pin for application boot from Flash (low) or system memory (high); sampled at reset."+ },+ {+ "number": "60",+ "name": "PB7",+ "type": "bidirectional",+ "description": "General-purpose I/O; 5V tolerant; I2C1_SDA/FSMC_NADV/TIM4_CH2 or USART1_RX."+ },+ {+ "number": "61",+ "name": "PB6",+ "type": "bidirectional",+ "description": "General-purpose I/O; 5V tolerant; I2C1_SCL or TIM4_CH1/USART1_TX."+ },+ {+ "number": "62",+ "name": "PB5",+ "type": "bidirectional",+ "description": "General-purpose I/O; I2C1_SMBA/SPI3_MOSI/I2S3_SD or TIM3_CH2/SPI1_MOSI."+ },+ {+ "number": "63",+ "name": "PB4",+ "type": "bidirectional",+ "description": "General-purpose I/O; 5V tolerant; NJTRST debug pin or SPI3_MISO/PB4/TIM3_CH1/SPI1_MISO."+ },+ {+ "number": "64",+ "name": "PB3",+ "type": "bidirectional",+ "description": "General-purpose I/O; 5V tolerant; JTAG/TRACESWO debug pin or SPI3_SCK/I2S3_CK/TIM2_CH2/SPI1_SCK."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586181490829111296",+ "pages": 130,+ "sha256": "6cc345d224870bff",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 64,+ "described": 64,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}