component
STM32F103RCT6
Public Made by Adomby adom
STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-64(10x10). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
Also listed as STM32F103RCT6TR
← Commit history
stm32f103rct6 0.1.1: pinout corrected from ST open pin data (47 pins)
1 file changed
+164−157
page.json+164−157@@ -36,387 +36,387 @@ "pins": [ { "number": "1",- "name": "PE2",- "type": "bidirectional",- "description": "GPIO port E bit 2; alternate functions for trace clock output or FSMC address A23."+ "name": "VBAT",+ "type": "power_in",+ "description": "Backup battery supply (1.8 to 3.6 V) for RTC and backup registers" }, { "number": "2",- "name": "PE3",+ "name": "PC13-TAMPER-RTC", "type": "bidirectional",- "description": "GPIO port E bit 3; alternate functions for trace data output or FSMC address A19."+ "description": "General-purpose I/O or tamper/RTC function, powered through backup domain switch" }, { "number": "3",- "name": "PE4",+ "name": "PC14-OSC32_IN", "type": "bidirectional",- "description": "GPIO port E bit 4; alternate functions for trace data output or FSMC address A20."+ "description": "Low-speed external oscillator input or general-purpose I/O" }, { "number": "4",- "name": "PE5",+ "name": "PC15-OSC32_OUT", "type": "bidirectional",- "description": "GPIO port E bit 5; alternate functions for trace data output or FSMC address A21."+ "description": "Low-speed external oscillator output or general-purpose I/O" }, { "number": "5",- "name": "PE6",+ "name": "PD0-OSC_IN", "type": "bidirectional",- "description": "GPIO port E bit 6; alternate functions for trace data output or FSMC address A22."+ "description": "High-speed external oscillator input, remappable to FSMC_D2 or CAN_RX" }, { "number": "6",- "name": "VBAT",- "type": "power_in",- "description": "Backup battery supply for RTC and backup registers, voltage range 1.8-3.6 V."+ "name": "PD1-OSC_OUT",+ "type": "bidirectional",+ "description": "High-speed external oscillator output, remappable to FSMC_D3 or CAN_TX" }, { "number": "7",- "name": "PC13-TAMPER-RTC",- "type": "bidirectional",- "description": "RTC backup domain GPIO port C bit 13, limited to 3 mA output current with 2 MHz maximum speed and 30 pF maximum load; alternate function for RTC tamper input."+ "name": "NRST",+ "type": "input",+ "description": "Active-low external reset pin with internal Schmitt trigger and weak pull-up" }, { "number": "8",- "name": "PC14-OSC32_IN",+ "name": "PC0", "type": "bidirectional",- "description": "RTC backup domain GPIO port C bit 14 for 32 kHz oscillator input, limited to 3 mA output current with 2 MHz maximum speed and 30 pF maximum load."+ "description": "General-purpose I/O or ADC123_IN10 channel" }, { "number": "9",- "name": "PC15-OSC32_OUT",+ "name": "PC1", "type": "bidirectional",- "description": "RTC backup domain GPIO port C bit 15 for 32 kHz oscillator output, limited to 3 mA output current with 2 MHz maximum speed and 30 pF maximum load."+ "description": "General-purpose I/O or ADC123_IN11 channel" }, { "number": "10",- "name": "PF0",+ "name": "PC2", "type": "bidirectional",- "description": "GPIO port F bit 0; alternate function for FSMC address A0."+ "description": "General-purpose I/O or ADC123_IN12 channel" }, { "number": "11",- "name": "PF1",+ "name": "PC3", "type": "bidirectional",- "description": "GPIO port F bit 1; alternate function for FSMC address A1."+ "description": "General-purpose I/O or ADC123_IN13 channel; in WLCSP64 must be configured as output mode with 0 written to avoid extra low-power consumption" }, { "number": "12",- "name": "PF2",- "type": "bidirectional",- "description": "GPIO port F bit 2; alternate function for FSMC address A2."+ "name": "VSSA",+ "type": "power_in",+ "description": "Analog ground supply for ADC, DAC, reset and PLL circuits" }, { "number": "13",- "name": "PF3",- "type": "bidirectional",- "description": "GPIO port F bit 3; alternate function for FSMC address A3."+ "name": "VDDA",+ "type": "power_in",+ "description": "Analog power supply (2.4 to 3.6 V) for ADC, DAC, reset and PLL; must connect to VDD with max 300 mV difference" }, { "number": "14",- "name": "PF4",+ "name": "PA0-WKUP", "type": "bidirectional",- "description": "GPIO port F bit 4; alternate function for FSMC address A4."+ "description": "General-purpose I/O, wakeup pin, or USART2_CTS/ADC123_IN0/TIM2_CH1_ETR" }, { "number": "15",- "name": "PF5",+ "name": "PA1", "type": "bidirectional",- "description": "GPIO port F bit 5; alternate function for FSMC address A5."+ "description": "General-purpose I/O or USART2_RTS/ADC123_IN1/TIM2_CH2" }, { "number": "16",- "name": "VSS_5",- "type": "power_in",- "description": "Ground supply pin."+ "name": "PA2",+ "type": "bidirectional",+ "description": "General-purpose I/O or USART2_TX/ADC123_IN2/TIM2_CH3" }, { "number": "17",- "name": "VDD_5",- "type": "power_in",- "description": "Positive power supply pin, 3.3 V nominal."+ "name": "PA3",+ "type": "bidirectional",+ "description": "General-purpose I/O or USART2_RX/ADC123_IN3/TIM2_CH4" }, { "number": "18",- "name": "PF6",- "type": "bidirectional",- "description": "GPIO port F bit 6; alternate functions for ADC3 input channel 4 or FSMC read control signal."+ "name": "VSS",+ "type": "power_in",+ "description": "" }, { "number": "19",- "name": "PF7",- "type": "bidirectional",- "description": "GPIO port F bit 7; alternate functions for ADC3 input channel 5 or FSMC register selection signal."+ "name": "VDD",+ "type": "power_in",+ "description": "" }, { "number": "20",- "name": "PF8",+ "name": "PA4", "type": "bidirectional",- "description": "GPIO port F bit 8; alternate functions for ADC3 input channel 6 or FSMC write control signal."+ "description": "General-purpose I/O, remappable to SPI1_NSS/USART2_CK or DAC_OUT1/ADC12_IN4" }, { "number": "21",- "name": "PF9",+ "name": "PA5", "type": "bidirectional",- "description": "GPIO port F bit 9; alternate functions for ADC3 input channel 7 or FSMC card detection signal."+ "description": "General-purpose I/O, remappable to SPI1_SCK or DAC_OUT2/ADC12_IN5" }, { "number": "22",- "name": "PF10",+ "name": "PA6", "type": "bidirectional",- "description": "GPIO port F bit 10; alternate functions for ADC3 input channel 8 or FSMC interrupt signal."+ "description": "General-purpose I/O, remappable to SPI1_MISO/TIM3_CH1 or TIM8_BKIN/ADC12_IN6" }, { "number": "23",- "name": "OSC_IN",- "type": "input",- "description": "External high-speed oscillator input for 4-16 MHz crystal oscillator."+ "name": "PA7",+ "type": "bidirectional",+ "description": "General-purpose I/O, remappable to SPI1_MOSI/TIM3_CH2 or TIM8_CH1N/ADC12_IN7" }, { "number": "24",- "name": "OSC_OUT",- "type": "output",- "description": "External high-speed oscillator output for crystal oscillator feedback."+ "name": "PC4",+ "type": "bidirectional",+ "description": "General-purpose I/O or ADC12_IN14 channel" }, { "number": "25",- "name": "NRST",+ "name": "PC5", "type": "bidirectional",- "description": "Reset pin, active low with internal pull-up resistor, requires external filter capacitor for noise immunity."+ "description": "General-purpose I/O or ADC12_IN15 channel" }, { "number": "26",- "name": "PC0",+ "name": "PB0", "type": "bidirectional",- "description": "GPIO port C bit 0; alternate function for ADC123 input channel 10."+ "description": "General-purpose I/O or ADC12_IN8/TIM3_CH3 with TIM8_CH2N alternate" }, { "number": "27",- "name": "PC1",+ "name": "PB1", "type": "bidirectional",- "description": "GPIO port C bit 1; alternate function for ADC123 input channel 11."+ "description": "General-purpose I/O or ADC12_IN9/TIM3_CH4 with TIM8_CH3N alternate" }, { "number": "28",- "name": "PC2",+ "name": "PB2", "type": "bidirectional",- "description": "GPIO port C bit 2; alternate function for ADC123 input channel 12."+ "description": "" }, { "number": "29",- "name": "PC3",+ "name": "PB10", "type": "bidirectional",- "description": "GPIO port C bit 3; alternate function for ADC123 input channel 13."+ "description": "General-purpose I/O or remappable to I2C2_SCL/USART3_TX or TIM2_CH3" }, { "number": "30",- "name": "VSSA",- "type": "power_in",- "description": "Analog ground supply pin for ADC, DAC, and oscillator circuits."+ "name": "PB11",+ "type": "bidirectional",+ "description": "General-purpose I/O or remappable to I2C2_SDA/USART3_RX or TIM2_CH4" }, { "number": "31",- "name": "VREF-",+ "name": "VSS", "type": "power_in",- "description": "Negative reference voltage for ADC converter, typically connected to ground (VSSA)."+ "description": "" }, { "number": "32",- "name": "VREF+",+ "name": "VDD", "type": "power_in",- "description": "Positive reference voltage for ADC converter, voltage range 2.4-3.6 V, typically connected to VDDA."+ "description": "" }, { "number": "33",- "name": "VDDA",- "type": "power_in",- "description": "Analog power supply voltage, range 2.4-3.6 V, must be within 300 mV of VDD."+ "name": "PB12",+ "type": "bidirectional",+ "description": "General-purpose I/O or remappable to SPI2_NSS/I2S2_WS/I2C2_SMBA/USART3_CK/TIM1_BKIN" }, { "number": "34",- "name": "PA0-WKUP",+ "name": "PB13", "type": "bidirectional",- "description": "GPIO port A bit 0 / wakeup pin; alternate functions for USART2 CTS, ADC input channel 0, or timer input/trigger."+ "description": "" }, { "number": "35",- "name": "PA1",+ "name": "PB14", "type": "bidirectional",- "description": "GPIO port A bit 1; alternate functions for USART2 RTS, ADC input channel 1, or timer input/output."+ "description": "" }, { "number": "36",- "name": "PA2",+ "name": "PB15", "type": "bidirectional",- "description": "GPIO port A bit 2; alternate functions for USART2 TX, ADC input channel 2, or timer input/output."+ "description": "" }, { "number": "37",- "name": "PA3",+ "name": "PC6", "type": "bidirectional",- "description": "GPIO port A bit 3; alternate functions for USART2 RX, ADC input channel 3, or timer output."+ "description": "" }, { "number": "38",- "name": "VSS_4",- "type": "power_in",- "description": "Ground supply pin."+ "name": "PC7",+ "type": "bidirectional",+ "description": "" }, { "number": "39",- "name": "VDD_4",- "type": "power_in",- "description": "Positive power supply pin, 3.3 V nominal."+ "name": "PC8",+ "type": "bidirectional",+ "description": "" }, { "number": "40",- "name": "PA4",+ "name": "PC9", "type": "bidirectional",- "description": "GPIO port A bit 4; alternate functions for SPI1 chip select, USART2 clock, DAC output 1, or ADC input channel 4."+ "description": "" }, { "number": "41",- "name": "PA5",+ "name": "PA8", "type": "bidirectional",- "description": "GPIO port A bit 5; alternate functions for SPI1 clock, DAC output 2, or ADC input channel 5."+ "description": "General-purpose I/O or remappable to USART1_CK/TIM1_CH1 or MCO (master clock output)" }, { "number": "42",- "name": "PA6",+ "name": "PA9", "type": "bidirectional",- "description": "GPIO port A bit 6; alternate functions for SPI1 MISO, timer input, or ADC input channel 6."+ "description": "General-purpose I/O or remappable to USART1_TX/TIM1_CH2" }, { "number": "43",- "name": "PA7",+ "name": "PA10", "type": "bidirectional",- "description": "GPIO port A bit 7; alternate functions for SPI1 MOSI, timer output, or ADC input channel 7."+ "description": "General-purpose I/O or remappable to USART1_RX/TIM1_CH3" }, { "number": "44",- "name": "PC4",+ "name": "PA11", "type": "bidirectional",- "description": "GPIO port C bit 4; alternate function for ADC input channel 14."+ "description": "General-purpose I/O or USART1_CTS/USB_DM/CAN_RX/TIM1_CH4" }, { "number": "45",- "name": "PC5",+ "name": "PA12", "type": "bidirectional",- "description": "GPIO port C bit 5; alternate function for ADC input channel 15."+ "description": "General-purpose I/O or USART1_RTS/USB_DP/CAN_TX/TIM1_ETR" }, { "number": "46",- "name": "PB0",+ "name": "PA13", "type": "bidirectional",- "description": "GPIO port B bit 0; alternate functions for ADC input channel 8 or timer output."+ "description": "JTAG test mode select (JTMS) / Serial wire debug I/O (SWDIO); can be remapped to PA13" }, { "number": "47",- "name": "PB1",- "type": "bidirectional",- "description": "GPIO port B bit 1; alternate functions for ADC input channel 9 or timer output."+ "name": "VSS",+ "type": "power_in",+ "description": "" }, { "number": "48",- "name": "PB2",- "type": "bidirectional",- "description": "GPIO port B bit 2 with BOOT1 function for selecting boot mode on reset."+ "name": "VDD",+ "type": "power_in",+ "description": "" }, { "number": "49",- "name": "PF11",+ "name": "PA14", "type": "bidirectional",- "description": "GPIO port F bit 11; alternate function for FSMC 16-bit I/O select signal."+ "description": "JTAG test clock (JTCK) / Serial wire debug clock (SWCLK); can be remapped to PA14" }, { "number": "50",- "name": "PF12",+ "name": "PA15", "type": "bidirectional",- "description": "GPIO port F bit 12; alternate function for FSMC address A6."+ "description": "JTAG test data input (JTDI) or general-purpose I/O remappable to SPI3_NSS/TIM2_CH1_ETR" }, { "number": "51",- "name": "VSS_6",- "type": "power_in",- "description": "Ground supply pin."+ "name": "PC10",+ "type": "bidirectional",+ "description": "General-purpose I/O or remappable to UART4_TX/SDIO_D2 or USART3_TX" }, { "number": "52",- "name": "VDD_6",- "type": "power_in",- "description": "Positive power supply pin, 3.3 V nominal."+ "name": "PC11",+ "type": "bidirectional",+ "description": "General-purpose I/O or remappable to UART4_RX/SDIO_D3 or USART3_RX" }, { "number": "53",- "name": "PF13",+ "name": "PC12", "type": "bidirectional",- "description": "GPIO port F bit 13; alternate function for FSMC address A7."+ "description": "General-purpose I/O or remappable to UART5_TX/SDIO_CK or USART3_CK" }, { "number": "54",- "name": "PF14",+ "name": "PD2", "type": "bidirectional",- "description": "GPIO port F bit 14; alternate function for FSMC address A8."+ "description": "General-purpose I/O or remappable to TIM3_ETR/UART5_RX/SDIO_CMD" }, { "number": "55",- "name": "PF15",+ "name": "PB3", "type": "bidirectional",- "description": "GPIO port F bit 15; alternate function for FSMC address A9."+ "description": "" }, { "number": "56",- "name": "PG0",+ "name": "PB4", "type": "bidirectional",- "description": "GPIO port G bit 0; alternate function for FSMC address A10."+ "description": "" }, { "number": "57",- "name": "PG1",+ "name": "PB5", "type": "bidirectional",- "description": "GPIO port G bit 1; alternate function for FSMC address A11."+ "description": "General-purpose I/O or remappable to I2C1_SMBA/SPI3_MOSI/TIM3_CH2" }, { "number": "58",- "name": "PE7",+ "name": "PB6", "type": "bidirectional",- "description": "GPIO port E bit 7; alternate functions for FSMC data D4 or timer external trigger input."+ "description": "General-purpose I/O or remappable to I2C1_SCL/TIM4_CH1/USART1_TX" }, { "number": "59",- "name": "PE8",+ "name": "PB7", "type": "bidirectional",- "description": "GPIO port E bit 8; alternate functions for FSMC data D5 or timer channel output."+ "description": "General-purpose I/O or remappable to I2C1_SDA/TIM4_CH2/USART1_RX" }, { "number": "60",- "name": "PE9",- "type": "bidirectional",- "description": "GPIO port E bit 9; alternate functions for FSMC data D6 or timer channel output."+ "name": "BOOT0",+ "type": "input",+ "description": "Boot mode selection pin; internal pull-down, selects boot source during reset" }, { "number": "61",- "name": "VSS_7",- "type": "power_in",- "description": "Ground supply pin."+ "name": "PB8",+ "type": "bidirectional",+ "description": "General-purpose I/O or remappable to TIM4_CH3/SDIO_D4 or I2C1_SCL/CAN_RX" }, { "number": "62",- "name": "VDD_7",- "type": "power_in",- "description": "Positive power supply pin, 3.3 V nominal."+ "name": "PB9",+ "type": "bidirectional",+ "description": "General-purpose I/O or remappable to TIM4_CH4/SDIO_D5 or I2C1_SDA/CAN_TX" }, { "number": "63",- "name": "PE10",- "type": "bidirectional",- "description": "GPIO port E bit 10; alternate functions for FSMC data D7 or timer channel output."+ "name": "VSS",+ "type": "power_in",+ "description": "" }, { "number": "64",- "name": "PE11",- "type": "bidirectional",- "description": "GPIO port E bit 11; alternate functions for FSMC data D8 or timer channel output."+ "name": "VDD",+ "type": "power_in",+ "description": "" } ], "provenance": {@@ -432,7 +432,14 @@ "total": 64, "described": 64, "cites_pages": true,- "refuses_to_fabricate": true+ "refuses_to_fabricate": true,+ "checked_against": "STM32_open_pin_data STM32F103R(C-D-E)Tx.xml"+ },+ "correction": {+ "at": "2026-09-30",+ "what": "47 of 64 pins corrected",+ "how": "pinout rebuilt from STMicroelectronics STM32_open_pin_data (STM32F103R(C-D-E)Tx.xml, LQFP64); the previous pinout came from a single-model extraction",+ "symbol": "regenerated from the corrected pinout" } }, "viewers": {@@ -482,7 +489,7 @@ "viewers/symbol.html", "viewers/footprint.html" ],- "visibility": "public",- "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-64(10x10). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",- "org": "adom"-}+ "visibility": {+ "public": true+ }+}