← Commit history
README.mdadded+100@@ -0,0 +1,100 @@+# STM32F103R8T6++**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · LQFP-64(10x10)++STM32F103R8T6 from STMicroelectronics, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VBAT | power_in | Backup domain power supply 1.8-3.6V for RTC and backup registers |+| 2 | PC13-TAMPER-RTC | bidirectional | PC13 GPIO or TAMPER-RTC alternate function |+| 3 | PC14-OSC32_IN | bidirectional | PC14 GPIO or low-speed 32.768 kHz oscillator input |+| 4 | PC15-OSC32_OUT | bidirectional | PC15 GPIO or low-speed 32.768 kHz oscillator output |+| 5 | OSC_IN (PD0) | input | High-speed 4-16 MHz oscillator input or remappable PD0 GPIO |+| 6 | OSC_OUT (PD1) | output | High-speed 4-16 MHz oscillator output or remappable PD1 GPIO |+| 7 | NRST | bidirectional | Active-low asynchronous reset pin with internal 40-50kΩ pull-up |+| 8 | PC0 | bidirectional | GPIO PC0 or ADC12_IN10 analog input 0-VDDA |+| 9 | PC1 | bidirectional | GPIO PC1 or ADC12_IN11 analog input 0-VDDA |+| 10 | PC2 | bidirectional | GPIO PC2 or ADC12_IN12 analog input 0-VDDA |+| 11 | PC3 | bidirectional | GPIO PC3 or ADC12_IN13 analog input 0-VDDA |+| 12 | VSSA | power_in | Analog ground reference |+| 13 | VDDA | power_in | Analog power supply 2.4-3.6V minimum when ADC is used |+| 14 | PA0-WKUP | bidirectional | GPIO PA0 or wake-up pin or USART2_CTS or ADC12_IN0 or TIM2_CH1_ETR |+| 15 | PA1 | bidirectional | GPIO PA1 or USART2_RTS or ADC12_IN1 or TIM2_CH2 |+| 16 | PA2 | bidirectional | GPIO PA2 or USART2_TX or ADC12_IN2 or TIM2_CH3 |+| 17 | PA3 | bidirectional | GPIO PA3 or USART2_RX or ADC12_IN3 or TIM2_CH4 |+| 18 | VSS_4 | power_in | Ground |+| 19 | VDD_4 | power_in | Main power supply 2.0-3.6V |+| 20 | PA4 | bidirectional | GPIO PA4 or SPI1_NSS or USART2_CK or ADC12_IN4 |+| 21 | PA5 | bidirectional | GPIO PA5 or SPI1_SCK or ADC12_IN5 |+| 22 | PA6 | bidirectional | GPIO PA6 or SPI1_MISO or ADC12_IN6 or TIM3_CH1 or TIM1_BKIN |+| 23 | PA7 | bidirectional | GPIO PA7 or SPI1_MOSI or ADC12_IN7 or TIM3_CH2 or TIM1_CH1N |+| 24 | PC4 | bidirectional | GPIO PC4 or ADC12_IN14 analog input |+| 25 | PC5 | bidirectional | GPIO PC5 or ADC12_IN15 analog input |+| 26 | PB0 | bidirectional | GPIO PB0 or ADC12_IN8 or TIM3_CH3 or TIM1_CH2N |+| 27 | PB1 | bidirectional | GPIO PB1 or ADC12_IN9 or TIM3_CH4 or TIM1_CH3N |+| 28 | PB2 | bidirectional | GPIO PB2/BOOT1 for selecting boot source |+| 29 | PB10 | bidirectional | GPIO PB10 or I2C2_SCL or USART3_TX or TIM2_CH3 |+| 30 | PB11 | bidirectional | GPIO PB11 or I2C2_SDA or USART3_RX or TIM2_CH4 |+| 31 | VSS_1 | power_in | Ground |+| 32 | VDD_1 | power_in | Main power supply 2.0-3.6V |+| 33 | PB12 | bidirectional | GPIO PB12 or SPI2_NSS or I2C2_SMBA or USART3_CK or TIM1_BKIN |+| 34 | PB13 | bidirectional | GPIO PB13 or SPI2_SCK or USART3_CTS or TIM1_CH1N |+| 35 | PB14 | bidirectional | GPIO PB14 or SPI2_MISO or USART3_RTS or TIM1_CH2N |+| 36 | PB15 | bidirectional | GPIO PB15 or SPI2_MOSI or TIM1_CH3N |+| 37 | PC6 | bidirectional | 5V-tolerant GPIO PC6 or TIM3_CH1 |+| 38 | PC7 | bidirectional | 5V-tolerant GPIO PC7 or TIM3_CH2 |+| 39 | PC8 | bidirectional | 5V-tolerant GPIO PC8 or TIM3_CH3 |+| 40 | PC9 | bidirectional | 5V-tolerant GPIO PC9 or TIM3_CH4 |+| 41 | PA8 | bidirectional | 5V-tolerant GPIO PA8 or USART1_CK or TIM1_CH1 or MCO clock output |+| 42 | PA9 | bidirectional | 5V-tolerant GPIO PA9 or USART1_TX or TIM1_CH2 |+| 43 | PA10 | bidirectional | 5V-tolerant GPIO PA10 or USART1_RX or TIM1_CH3 |+| 44 | PA11 | bidirectional | 5V-tolerant GPIO PA11 or USART1_CTS or CANRX or USBDM or TIM1_CH4 |+| 45 | PA12 | bidirectional | 5V-tolerant GPIO PA12 or USART1_RTS or CANTX or USBDP or TIM1_ETR |+| 46 | PA13 | bidirectional | 5V-tolerant JTMS/SWDIO serial-wire and JTAG debug interface |+| 47 | VSS_2 | power_in | Ground |+| 48 | VDD_2 | power_in | Main power supply 2.0-3.6V |+| 49 | PA14 | bidirectional | 5V-tolerant JTCK/SWCLK serial-wire and JTAG debug interface |+| 50 | PA15 | bidirectional | 5V-tolerant JTDI debug interface or GPIO PA15 or TIM2_CH1_ETR or SPI1_NSS |+| 51 | PC10 | bidirectional | 5V-tolerant GPIO PC10 or USART3_TX |+| 52 | PC11 | bidirectional | 5V-tolerant GPIO PC11 or USART3_RX |+| 53 | PC12 | bidirectional | 5V-tolerant GPIO PC12 or USART3_CK |+| 54 | PD2 | bidirectional | 5V-tolerant GPIO PD2 or TIM3_ETR |+| 55 | PB3 | bidirectional | 5V-tolerant JTDO debug interface or GPIO PB3 or TIM2_CH2 or SPI1_SCK or TRACESWO |+| 56 | PB4 | bidirectional | 5V-tolerant JNTRST debug interface or GPIO PB4 or TIM3_CH1 or SPI1_MISO |+| 57 | PB5 | bidirectional | GPIO PB5 or I2C1_SMBA or TIM3_CH2 or SPI1_MOSI |+| 58 | PB6 | bidirectional | 5V-tolerant GPIO PB6 or I2C1_SCL or TIM4_CH1 or USART1_TX |+| 59 | PB7 | bidirectional | 5V-tolerant GPIO PB7 or I2C1_SDA or TIM4_CH2 or USART1_RX |+| 60 | BOOT0 | input | Boot mode selection input strapped to VSS for normal operation or VDD for bootloader |+| 61 | PB8 | bidirectional | 5V-tolerant GPIO PB8 or TIM4_CH3 or I2C1_SCL or CANRX |+| 62 | PB9 | bidirectional | 5V-tolerant GPIO PB9 or TIM4_CH4 or I2C1_SDA or CANTX |+| 63 | VSS_3 | power_in | Ground |+| 64 | VDD_3 | power_in | Main power supply 2.0-3.6V |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | LQFP-64(10x10) |+| Category | Embedded Processors & Controllers |+| Pins | 64 |++## CAD (KiCad official)++- Symbol: `STM32F103R8T6`+- Footprint: `Package_QFP:LQFP-64_10x10mm_P0.5mm`+- 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)+- 3D model files: `stm32f103r8t6-etched.step` / `stm32f103r8t6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32f103r8t6.step` / `stm32f103r8t6.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8579708240105422848) (105 pp, sha256 `ceab0f159ae79118`, retrieved 2026-09-23, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm32f103r8t6-datasheet.pdf)
page.jsonadded+479@@ -0,0 +1,479 @@+{+ "slug": "stm32f103r8t6",+ "version": "0.1.0",+ "type": "component",+ "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-64(10x10). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "embedded processors & controllers",+ "stm32f103r8t6",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "stm32f103r8t6.kicad_sym",+ "stm32f103r8t6.kicad_mod",+ "stm32f103r8t6.glb",+ "stm32f103r8t6.step",+ "stm32f103r8t6.lbr",+ "docs/hero.png",+ "docs/stm32f103r8t6-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "STM32F103R8T6",+ "manufacturer": "STMicroelectronics",+ "package": "LQFP-64(10x10)",+ "pin_count": 64,+ "category": "Embedded Processors & Controllers",+ "subcategory": "Microcontrollers (MCU/MPU/SOC)",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8579708240105422848",+ "parts": {+ "symbol": "stm32f103r8t6.kicad_sym",+ "footprint": "stm32f103r8t6.kicad_mod",+ "model_3d": "stm32f103r8t6-etched.glb",+ "model_3d_plain": "stm32f103r8t6.glb",+ "model_3d_step": "stm32f103r8t6-etched.step",+ "model_3d_step_plain": "stm32f103r8t6.step",+ "lbr": "stm32f103r8t6.lbr"+ },+ "distributor_links": {+ "lcsc": "C46034"+ },+ "pins": [+ {+ "number": "1",+ "name": "VBAT",+ "type": "power_in",+ "description": "Backup domain power supply 1.8-3.6V for RTC and backup registers"+ },+ {+ "number": "2",+ "name": "PC13-TAMPER-RTC",+ "type": "bidirectional",+ "description": "PC13 GPIO or TAMPER-RTC alternate function"+ },+ {+ "number": "3",+ "name": "PC14-OSC32_IN",+ "type": "bidirectional",+ "description": "PC14 GPIO or low-speed 32.768 kHz oscillator input"+ },+ {+ "number": "4",+ "name": "PC15-OSC32_OUT",+ "type": "bidirectional",+ "description": "PC15 GPIO or low-speed 32.768 kHz oscillator output"+ },+ {+ "number": "5",+ "name": "OSC_IN (PD0)",+ "type": "input",+ "description": "High-speed 4-16 MHz oscillator input or remappable PD0 GPIO"+ },+ {+ "number": "6",+ "name": "OSC_OUT (PD1)",+ "type": "output",+ "description": "High-speed 4-16 MHz oscillator output or remappable PD1 GPIO"+ },+ {+ "number": "7",+ "name": "NRST",+ "type": "bidirectional",+ "description": "Active-low asynchronous reset pin with internal 40-50kΩ pull-up"+ },+ {+ "number": "8",+ "name": "PC0",+ "type": "bidirectional",+ "description": "GPIO PC0 or ADC12_IN10 analog input 0-VDDA"+ },+ {+ "number": "9",+ "name": "PC1",+ "type": "bidirectional",+ "description": "GPIO PC1 or ADC12_IN11 analog input 0-VDDA"+ },+ {+ "number": "10",+ "name": "PC2",+ "type": "bidirectional",+ "description": "GPIO PC2 or ADC12_IN12 analog input 0-VDDA"+ },+ {+ "number": "11",+ "name": "PC3",+ "type": "bidirectional",+ "description": "GPIO PC3 or ADC12_IN13 analog input 0-VDDA"+ },+ {+ "number": "12",+ "name": "VSSA",+ "type": "power_in",+ "description": "Analog ground reference"+ },+ {+ "number": "13",+ "name": "VDDA",+ "type": "power_in",+ "description": "Analog power supply 2.4-3.6V minimum when ADC is used"+ },+ {+ "number": "14",+ "name": "PA0-WKUP",+ "type": "bidirectional",+ "description": "GPIO PA0 or wake-up pin or USART2_CTS or ADC12_IN0 or TIM2_CH1_ETR"+ },+ {+ "number": "15",+ "name": "PA1",+ "type": "bidirectional",+ "description": "GPIO PA1 or USART2_RTS or ADC12_IN1 or TIM2_CH2"+ },+ {+ "number": "16",+ "name": "PA2",+ "type": "bidirectional",+ "description": "GPIO PA2 or USART2_TX or ADC12_IN2 or TIM2_CH3"+ },+ {+ "number": "17",+ "name": "PA3",+ "type": "bidirectional",+ "description": "GPIO PA3 or USART2_RX or ADC12_IN3 or TIM2_CH4"+ },+ {+ "number": "18",+ "name": "VSS_4",+ "type": "power_in",+ "description": "Ground"+ },+ {+ "number": "19",+ "name": "VDD_4",+ "type": "power_in",+ "description": "Main power supply 2.0-3.6V"+ },+ {+ "number": "20",+ "name": "PA4",+ "type": "bidirectional",+ "description": "GPIO PA4 or SPI1_NSS or USART2_CK or ADC12_IN4"+ },+ {+ "number": "21",+ "name": "PA5",+ "type": "bidirectional",+ "description": "GPIO PA5 or SPI1_SCK or ADC12_IN5"+ },+ {+ "number": "22",+ "name": "PA6",+ "type": "bidirectional",+ "description": "GPIO PA6 or SPI1_MISO or ADC12_IN6 or TIM3_CH1 or TIM1_BKIN"+ },+ {+ "number": "23",+ "name": "PA7",+ "type": "bidirectional",+ "description": "GPIO PA7 or SPI1_MOSI or ADC12_IN7 or TIM3_CH2 or TIM1_CH1N"+ },+ {+ "number": "24",+ "name": "PC4",+ "type": "bidirectional",+ "description": "GPIO PC4 or ADC12_IN14 analog input"+ },+ {+ "number": "25",+ "name": "PC5",+ "type": "bidirectional",+ "description": "GPIO PC5 or ADC12_IN15 analog input"+ },+ {+ "number": "26",+ "name": "PB0",+ "type": "bidirectional",+ "description": "GPIO PB0 or ADC12_IN8 or TIM3_CH3 or TIM1_CH2N"+ },+ {+ "number": "27",+ "name": "PB1",+ "type": "bidirectional",+ "description": "GPIO PB1 or ADC12_IN9 or TIM3_CH4 or TIM1_CH3N"+ },+ {+ "number": "28",+ "name": "PB2",+ "type": "bidirectional",+ "description": "GPIO PB2/BOOT1 for selecting boot source"+ },+ {+ "number": "29",+ "name": "PB10",+ "type": "bidirectional",+ "description": "GPIO PB10 or I2C2_SCL or USART3_TX or TIM2_CH3"+ },+ {+ "number": "30",+ "name": "PB11",+ "type": "bidirectional",+ "description": "GPIO PB11 or I2C2_SDA or USART3_RX or TIM2_CH4"+ },+ {+ "number": "31",+ "name": "VSS_1",+ "type": "power_in",+ "description": "Ground"+ },+ {+ "number": "32",+ "name": "VDD_1",+ "type": "power_in",+ "description": "Main power supply 2.0-3.6V"+ },+ {+ "number": "33",+ "name": "PB12",+ "type": "bidirectional",+ "description": "GPIO PB12 or SPI2_NSS or I2C2_SMBA or USART3_CK or TIM1_BKIN"+ },+ {+ "number": "34",+ "name": "PB13",+ "type": "bidirectional",+ "description": "GPIO PB13 or SPI2_SCK or USART3_CTS or TIM1_CH1N"+ },+ {+ "number": "35",+ "name": "PB14",+ "type": "bidirectional",+ "description": "GPIO PB14 or SPI2_MISO or USART3_RTS or TIM1_CH2N"+ },+ {+ "number": "36",+ "name": "PB15",+ "type": "bidirectional",+ "description": "GPIO PB15 or SPI2_MOSI or TIM1_CH3N"+ },+ {+ "number": "37",+ "name": "PC6",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO PC6 or TIM3_CH1"+ },+ {+ "number": "38",+ "name": "PC7",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO PC7 or TIM3_CH2"+ },+ {+ "number": "39",+ "name": "PC8",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO PC8 or TIM3_CH3"+ },+ {+ "number": "40",+ "name": "PC9",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO PC9 or TIM3_CH4"+ },+ {+ "number": "41",+ "name": "PA8",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO PA8 or USART1_CK or TIM1_CH1 or MCO clock output"+ },+ {+ "number": "42",+ "name": "PA9",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO PA9 or USART1_TX or TIM1_CH2"+ },+ {+ "number": "43",+ "name": "PA10",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO PA10 or USART1_RX or TIM1_CH3"+ },+ {+ "number": "44",+ "name": "PA11",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO PA11 or USART1_CTS or CANRX or USBDM or TIM1_CH4"+ },+ {+ "number": "45",+ "name": "PA12",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO PA12 or USART1_RTS or CANTX or USBDP or TIM1_ETR"+ },+ {+ "number": "46",+ "name": "PA13",+ "type": "bidirectional",+ "description": "5V-tolerant JTMS/SWDIO serial-wire and JTAG debug interface"+ },+ {+ "number": "47",+ "name": "VSS_2",+ "type": "power_in",+ "description": "Ground"+ },+ {+ "number": "48",+ "name": "VDD_2",+ "type": "power_in",+ "description": "Main power supply 2.0-3.6V"+ },+ {+ "number": "49",+ "name": "PA14",+ "type": "bidirectional",+ "description": "5V-tolerant JTCK/SWCLK serial-wire and JTAG debug interface"+ },+ {+ "number": "50",+ "name": "PA15",+ "type": "bidirectional",+ "description": "5V-tolerant JTDI debug interface or GPIO PA15 or TIM2_CH1_ETR or SPI1_NSS"+ },+ {+ "number": "51",+ "name": "PC10",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO PC10 or USART3_TX"+ },+ {+ "number": "52",+ "name": "PC11",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO PC11 or USART3_RX"+ },+ {+ "number": "53",+ "name": "PC12",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO PC12 or USART3_CK"+ },+ {+ "number": "54",+ "name": "PD2",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO PD2 or TIM3_ETR"+ },+ {+ "number": "55",+ "name": "PB3",+ "type": "bidirectional",+ "description": "5V-tolerant JTDO debug interface or GPIO PB3 or TIM2_CH2 or SPI1_SCK or TRACESWO"+ },+ {+ "number": "56",+ "name": "PB4",+ "type": "bidirectional",+ "description": "5V-tolerant JNTRST debug interface or GPIO PB4 or TIM3_CH1 or SPI1_MISO"+ },+ {+ "number": "57",+ "name": "PB5",+ "type": "bidirectional",+ "description": "GPIO PB5 or I2C1_SMBA or TIM3_CH2 or SPI1_MOSI"+ },+ {+ "number": "58",+ "name": "PB6",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO PB6 or I2C1_SCL or TIM4_CH1 or USART1_TX"+ },+ {+ "number": "59",+ "name": "PB7",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO PB7 or I2C1_SDA or TIM4_CH2 or USART1_RX"+ },+ {+ "number": "60",+ "name": "BOOT0",+ "type": "input",+ "description": "Boot mode selection input strapped to VSS for normal operation or VDD for bootloader"+ },+ {+ "number": "61",+ "name": "PB8",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO PB8 or TIM4_CH3 or I2C1_SCL or CANRX"+ },+ {+ "number": "62",+ "name": "PB9",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO PB9 or TIM4_CH4 or I2C1_SDA or CANTX"+ },+ {+ "number": "63",+ "name": "VSS_3",+ "type": "power_in",+ "description": "Ground"+ },+ {+ "number": "64",+ "name": "VDD_3",+ "type": "power_in",+ "description": "Main power supply 2.0-3.6V"+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: PC13-PC15 pins are supplied through a power switch limiting output current to 3mA maximum with outpu; PD0 and PD1 can only be used at 50 MHz maximum in output mode and are used by default for oscillator"+ ],+ "pages_sent": 105,+ "cost_usd": 1.3398,+ "at": "2026-09-23T02:21:31"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8579708240105422848",+ "pages": 105,+ "sha256": "ceab0f159ae79118",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 64,+ "described": 64,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}