component
STM32F103CBT6TR
Public Made by Adomby adom
STMicroelectronics Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, LQFP-48(7x7). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
← Commit history
page.json+434−8@@ -1,13 +1,444 @@ {+ "schema_version": 1,+ "type": "component", "slug": "stm32f103cbt6tr",+ "title": "STM32F103CBT6TR",+ "brief": "STMicroelectronics Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, LQFP-48(7x7). Datasheet-verified pinout, KiCad symbol/footprint/3D.", "version": "0.1.0",- "type": "component",- "description": "STMicroelectronics Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, LQFP-48(7x7). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "license": "CC-BY-SA-4.0", "tags": [ "component", "pmic", "stm32f103cbt6tr" ],+ "component": {+ "mpn": "STM32F103CBT6TR",+ "manufacturer": "STMicroelectronics",+ "package": "LQFP-48(7x7)",+ "pin_count": 48,+ "category": "PMIC",+ "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+ "datasheet": "https://www.st.com/resource/en/datasheet/stm32f103cbt6tr.pdf",+ "parts": {+ "symbol": "stm32f103cbt6tr.kicad_sym",+ "footprint": "stm32f103cbt6tr.kicad_mod",+ "model_3d": "stm32f103cbt6tr.glb",+ "model_3d_step": "stm32f103cbt6tr.step",+ "lbr": "stm32f103cbt6tr.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "VBAT",+ "type": "power_in",+ "description": "Battery backup supply for RTC, external 32 kHz oscillator and backup registers when VDD is off. 1.8 V to 3.6 V."+ },+ {+ "number": "2",+ "name": "PC13-TAMPER-RTC",+ "type": "bidirectional",+ "description": "General-purpose I/O PC13, also tamper detect input / RTC alarm/second output. Supplied from the switched backup domain; sink current limited to 3 mA and max 2 MHz on output, max load 30 pF."+ },+ {+ "number": "3",+ "name": "PC14-OSC32_IN",+ "type": "bidirectional",+ "description": "General-purpose I/O PC14, also LSE 32.768 kHz oscillator input when the LSE is enabled. Backup-domain switched supply, output speed limited to 2 MHz / 30 pF."+ },+ {+ "number": "4",+ "name": "PC15-OSC32_OUT",+ "type": "bidirectional",+ "description": "General-purpose I/O PC15, also LSE 32.768 kHz oscillator output when the LSE is enabled. Backup-domain switched supply, output speed limited to 2 MHz / 30 pF."+ },+ {+ "number": "5",+ "name": "PD0-OSC_IN",+ "type": "bidirectional",+ "description": "HSE crystal oscillator input by default after reset in this package; can be remapped to GPIO PD0 (CANRX alt-function). Output-mode speed limited to 50 MHz."+ },+ {+ "number": "6",+ "name": "PD1-OSC_OUT",+ "type": "bidirectional",+ "description": "HSE crystal oscillator output by default after reset in this package; can be remapped to GPIO PD1 (CANTX alt-function). Output-mode speed limited to 50 MHz."+ },+ {+ "number": "7",+ "name": "NRST",+ "type": "bidirectional",+ "description": "Active-low bidirectional device reset with internal weak pull-up. Drive low >20 us to reset; released by internal power/reset circuitry after POR."+ },+ {+ "number": "8",+ "name": "VSSA",+ "type": "power_in",+ "description": "Analog ground reference for ADCs and analog reference. Connect to system ground through a clean return path."+ },+ {+ "number": "9",+ "name": "VDDA",+ "type": "power_in",+ "description": "Analog supply for ADCs, reset block, RCs and PLL. 2.0 V to 3.6 V, must be applied together with VDD and typically equal to VDD."+ },+ {+ "number": "10",+ "name": "PA0-WKUP",+ "type": "bidirectional",+ "description": "GPIO PA0, WKUP input for Standby wake-up, and alt-functions USART2_CTS / ADC12_IN0 / TIM2_CH1_ETR. 5 V-tolerant is NOT set on this pin (analog-capable)."+ },+ {+ "number": "11",+ "name": "PA1",+ "type": "bidirectional",+ "description": "GPIO PA1, alt-functions USART2_RTS / ADC12_IN1 / TIM2_CH2."+ },+ {+ "number": "12",+ "name": "PA2",+ "type": "bidirectional",+ "description": "GPIO PA2, alt-functions USART2_TX / ADC12_IN2 / TIM2_CH3."+ },+ {+ "number": "13",+ "name": "PA3",+ "type": "bidirectional",+ "description": "GPIO PA3, alt-functions USART2_RX / ADC12_IN3 / TIM2_CH4."+ },+ {+ "number": "14",+ "name": "PA4",+ "type": "bidirectional",+ "description": "GPIO PA4, alt-functions SPI1_NSS / USART2_CK / ADC12_IN4."+ },+ {+ "number": "15",+ "name": "PA5",+ "type": "bidirectional",+ "description": "GPIO PA5, alt-functions SPI1_SCK / ADC12_IN5."+ },+ {+ "number": "16",+ "name": "PA6",+ "type": "bidirectional",+ "description": "GPIO PA6, alt-functions SPI1_MISO / ADC12_IN6 / TIM3_CH1, remap TIM1_BKIN."+ },+ {+ "number": "17",+ "name": "PA7",+ "type": "bidirectional",+ "description": "GPIO PA7, alt-functions SPI1_MOSI / ADC12_IN7 / TIM3_CH2, remap TIM1_CH1N."+ },+ {+ "number": "18",+ "name": "PB0",+ "type": "bidirectional",+ "description": "GPIO PB0, alt-functions ADC12_IN8 / TIM3_CH3, remap TIM1_CH2N."+ },+ {+ "number": "19",+ "name": "PB1",+ "type": "bidirectional",+ "description": "GPIO PB1, alt-functions ADC12_IN9 / TIM3_CH4, remap TIM1_CH3N."+ },+ {+ "number": "20",+ "name": "PB2/BOOT1",+ "type": "bidirectional",+ "description": "GPIO PB2, also BOOT1 boot-mode selection sampled at reset together with BOOT0."+ },+ {+ "number": "21",+ "name": "PB10",+ "type": "bidirectional",+ "description": "GPIO PB10, alt-functions I2C2_SCL / USART3_TX, remap TIM2_CH3. 5 V-tolerant."+ },+ {+ "number": "22",+ "name": "PB11",+ "type": "bidirectional",+ "description": "GPIO PB11, alt-functions I2C2_SDA / USART3_RX, remap TIM2_CH4. 5 V-tolerant."+ },+ {+ "number": "23",+ "name": "VSS_1",+ "type": "power_in",+ "description": "Digital ground (VSS domain 1)."+ },+ {+ "number": "24",+ "name": "VDD_1",+ "type": "power_in",+ "description": "Digital I/O and internal regulator supply (VDD domain 1). 2.0 V to 3.6 V."+ },+ {+ "number": "25",+ "name": "PB12",+ "type": "bidirectional",+ "description": "GPIO PB12, alt-functions SPI2_NSS / I2C2_SMBAI / USART3_CK / TIM1_BKIN. 5 V-tolerant."+ },+ {+ "number": "26",+ "name": "PB13",+ "type": "bidirectional",+ "description": "GPIO PB13, alt-functions SPI2_SCK / USART3_CTS / TIM1_CH1N. 5 V-tolerant."+ },+ {+ "number": "27",+ "name": "PB14",+ "type": "bidirectional",+ "description": "GPIO PB14, alt-functions SPI2_MISO / USART3_RTS / TIM1_CH2N. 5 V-tolerant."+ },+ {+ "number": "28",+ "name": "PB15",+ "type": "bidirectional",+ "description": "GPIO PB15, alt-functions SPI2_MOSI / TIM1_CH3N. 5 V-tolerant."+ },+ {+ "number": "29",+ "name": "PA8",+ "type": "bidirectional",+ "description": "GPIO PA8, alt-functions USART1_CK / TIM1_CH1 / MCO (master clock output). 5 V-tolerant."+ },+ {+ "number": "30",+ "name": "PA9",+ "type": "bidirectional",+ "description": "GPIO PA9, alt-functions USART1_TX / TIM1_CH2. 5 V-tolerant."+ },+ {+ "number": "31",+ "name": "PA10",+ "type": "bidirectional",+ "description": "GPIO PA10, alt-functions USART1_RX / TIM1_CH3. 5 V-tolerant."+ },+ {+ "number": "32",+ "name": "PA11",+ "type": "bidirectional",+ "description": "GPIO PA11, alt-functions USART1_CTS / CANRX / USBDM / TIM1_CH4. Shared USB D- and CAN RX; select one peripheral at a time. 5 V-tolerant."+ },+ {+ "number": "33",+ "name": "PA12",+ "type": "bidirectional",+ "description": "GPIO PA12, alt-functions USART1_RTS / CANTX / USBDP / TIM1_ETR. Shared USB D+ and CAN TX; select one peripheral at a time. 5 V-tolerant."+ },+ {+ "number": "34",+ "name": "PA13",+ "type": "bidirectional",+ "description": "After reset: JTMS/SWDIO serial-wire and JTAG data. Can be released to GPIO PA13 by disabling JTAG-SW debug. 5 V-tolerant."+ },+ {+ "number": "35",+ "name": "VSS_2",+ "type": "power_in",+ "description": "Digital ground (VSS domain 2)."+ },+ {+ "number": "36",+ "name": "VDD_2",+ "type": "power_in",+ "description": "Digital I/O and internal regulator supply (VDD domain 2). 2.0 V to 3.6 V."+ },+ {+ "number": "37",+ "name": "PA14",+ "type": "bidirectional",+ "description": "After reset: JTCK/SWCLK serial-wire and JTAG clock. Can be released to GPIO PA14 by disabling JTAG-SW debug. 5 V-tolerant."+ },+ {+ "number": "38",+ "name": "PA15",+ "type": "bidirectional",+ "description": "After reset: JTDI. Alt-functions include TIM2_CH1_ETR / PA15 / SPI1_NSS remap. 5 V-tolerant."+ },+ {+ "number": "39",+ "name": "PB3",+ "type": "bidirectional",+ "description": "After reset: JTDO / TRACESWO. Alt-functions include TIM2_CH2 / SPI1_SCK remap. 5 V-tolerant."+ },+ {+ "number": "40",+ "name": "PB4",+ "type": "bidirectional",+ "description": "After reset: NJTRST (active-low JTAG reset with pull-up). Alt-functions TIM3_CH1 / SPI1_MISO remap. 5 V-tolerant."+ },+ {+ "number": "41",+ "name": "PB5",+ "type": "bidirectional",+ "description": "GPIO PB5, alt-functions I2C1_SMBAI, remap TIM3_CH2 / SPI1_MOSI. NOT 5 V-tolerant (only standard-tolerant on this pin)."+ },+ {+ "number": "42",+ "name": "PB6",+ "type": "bidirectional",+ "description": "GPIO PB6, alt-functions I2C1_SCL / TIM4_CH1, remap USART1_TX. 5 V-tolerant."+ },+ {+ "number": "43",+ "name": "PB7",+ "type": "bidirectional",+ "description": "GPIO PB7, alt-functions I2C1_SDA / TIM4_CH2, remap USART1_RX. 5 V-tolerant."+ },+ {+ "number": "44",+ "name": "BOOT0",+ "type": "input",+ "description": "Boot-mode selection input sampled at reset with BOOT1(PB2): selects boot from Flash / System memory / SRAM."+ },+ {+ "number": "45",+ "name": "PB8",+ "type": "bidirectional",+ "description": "GPIO PB8, alt-function TIM4_CH3, remap I2C1_SCL / CANRX. 5 V-tolerant."+ },+ {+ "number": "46",+ "name": "PB9",+ "type": "bidirectional",+ "description": "GPIO PB9, alt-function TIM4_CH4, remap I2C1_SDA / CANTX. 5 V-tolerant."+ },+ {+ "number": "47",+ "name": "VSS_3",+ "type": "power_in",+ "description": "Digital ground (VSS domain 3)."+ },+ {+ "number": "48",+ "name": "VDD_3",+ "type": "power_in",+ "description": "Digital I/O and internal regulator supply (VDD domain 3). 2.0 V to 3.6 V."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://www.st.com/resource/en/datasheet/stm32f103cbt6tr.pdf",+ "pages": 116,+ "sha256": "0596dd57693c93d2",+ "source_tier": "mfr"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 48,+ "described": 48,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Manufacturer": "STMicroelectronics",+ "Package": "LQFP-48(7x7)",+ "Category": "PMIC",+ "Pins": "48"+ }+ },+ "variants": [+ {+ "mpn": "STM32F103CBT6TR",+ "kind": "packaging"+ },+ {+ "mpn": "STM32F103CBT6TRC8T6",+ "kind": "packaging"+ },+ {+ "mpn": "STM32F103CBT6TRC8T6TR",+ "kind": "packaging"+ },+ {+ "mpn": "STM32F103CBT6TRCBU6",+ "kind": "packaging"+ },+ {+ "mpn": "STM32F103CBT6TRCBU6TR",+ "kind": "packaging"+ },+ {+ "mpn": "STM32F103CBT6TRC8U6",+ "kind": "packaging"+ },+ {+ "mpn": "STM32F103CBT6TRC8U6TR",+ "kind": "packaging"+ },+ {+ "mpn": "STM32F103CBT6TRT8U6",+ "kind": "packaging"+ },+ {+ "mpn": "STM32F103CBT6TRTBU6",+ "kind": "packaging"+ },+ {+ "mpn": "STM32F103CBT6TRRBT6",+ "kind": "packaging"+ },+ {+ "mpn": "STM32F103CBT6TRR8T6",+ "kind": "packaging"+ },+ {+ "mpn": "STM32F103CBT6TRRBH6",+ "kind": "packaging"+ },+ {+ "mpn": "STM32F103CBT6TRR8H6",+ "kind": "packaging"+ },+ {+ "mpn": "STM32F103CBT6TRVBT6",+ "kind": "packaging"+ },+ {+ "mpn": "STM32F103CBT6TRV8T6",+ "kind": "packaging"+ },+ {+ "mpn": "STM32F103CBT6TRZBH6",+ "kind": "packaging"+ },+ {+ "mpn": "STM32F103CBT6TRZ8H6",+ "kind": "packaging"+ },+ {+ "mpn": "STM32F103CBT6TRZBY6",+ "kind": "packaging"+ },+ {+ "mpn": "STM32F103CBT6TRZ8Y6",+ "kind": "packaging"+ }+ ],+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "stm32f103cbt6tr"+ ],+ "discovery_pitch": "STM32F103CBT6TR (STMicroelectronics) component page with datasheet-verified CAD.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -25,10 +456,5 @@ "docs/stm32f103cbt6tr-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }