← Commit history

Initial commit: component/stm32f102c8t6

Ray ·83ac6e7d8f ·
2 files changed +481
README.mdadded+84
@@ -0,0 +1,84 @@+# STM32F102C8T6++**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · LQFP-48(7x7)++STM32F102C8T6 from STMicroelectronics, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VBAT | power_in | Backup domain supply 1.8-3.6 V for RTC and backup registers via power switch |+| 2 | PC13-TAMPER-RTC | bidirectional | GPIO Port C bit 13 with TAMPER-RTC alternate function for backup domain |+| 3 | PC14-OSC32_IN | bidirectional | GPIO Port C bit 14 with OSC32_IN alternate function for 32.768 kHz external oscillator input |+| 4 | PC15-OSC32_OUT | bidirectional | GPIO Port C bit 15 with OSC32_OUT alternate function for 32.768 kHz external oscillator output |+| 5 | OSC_IN | bidirectional | 5V-tolerant external high-speed oscillator input 4-16 MHz, remappable to PD0 |+| 6 | OSC_OUT | bidirectional | 5V-tolerant external high-speed oscillator output, remappable to PD1 |+| 7 | NRST | bidirectional | Active-low asynchronous reset input with internal pull-up resistor and RC filter recommended |+| 8 | VSSA | power_in | Analog ground reference connection for ADC |+| 9 | VDDA | power_in | Analog supply 2.4-3.6 V minimum when ADC is used |+| 10 | PA0-WKUP | bidirectional | GPIO Port A bit 0 with alternate functions WKUP/USART2_CTS/ADC_IN0/TIM2_CH1_ETR |+| 11 | PA1 | bidirectional | GPIO Port A bit 1 with alternate functions USART2_RTS/ADC_IN1/TIM2_CH2 |+| 12 | PA2 | bidirectional | GPIO Port A bit 2 with alternate functions USART2_TX/ADC_IN2/TIM2_CH3 |+| 13 | PA3 | bidirectional | GPIO Port A bit 3 with alternate functions USART2_RX/ADC_IN3/TIM2_CH4 |+| 14 | PA4 | bidirectional | GPIO Port A bit 4 with alternate functions SPI1_NSS/ADC_IN4/USART2_CK |+| 15 | PA5 | bidirectional | GPIO Port A bit 5 with alternate functions SPI1_SCK/ADC_IN5 |+| 16 | PA6 | bidirectional | GPIO Port A bit 6 with alternate functions SPI1_MISO/ADC_IN6/TIM3_CH1 |+| 17 | PA7 | bidirectional | GPIO Port A bit 7 with alternate functions SPI1_MOSI/ADC_IN7/TIM3_CH2 |+| 18 | PB0 | bidirectional | GPIO Port B bit 0 with alternate functions ADC_IN8/TIM3_CH3 |+| 19 | PB1 | bidirectional | GPIO Port B bit 1 with alternate functions ADC_IN9/TIM3_CH4 |+| 20 | PB2 | bidirectional | 5V-tolerant GPIO Port B bit 2 with BOOT1 alternate function |+| 21 | PB10 | bidirectional | 5V-tolerant GPIO Port B bit 10 with alternate functions I2C2_SCL/USART3_TX/TIM2_CH3 |+| 22 | PB11 | bidirectional | 5V-tolerant GPIO Port B bit 11 with alternate functions I2C2_SDA/USART3_RX/TIM2_CH4 |+| 23 | VSS_1 | power_in | Ground connection to external power supply |+| 24 | VDD_1 | power_in | Main supply 2.0-3.6 V for core and I/Os |+| 25 | PB12 | bidirectional | 5V-tolerant GPIO Port B bit 12 with alternate functions SPI2_NSS/I2C2_SMBA/USART3_CK |+| 26 | PB13 | bidirectional | 5V-tolerant GPIO Port B bit 13 with alternate functions SPI2_SCK/USART3_CTS |+| 27 | PB14 | bidirectional | 5V-tolerant GPIO Port B bit 14 with alternate functions SPI2_MISO/USART3_RTS |+| 28 | PB15 | bidirectional | 5V-tolerant GPIO Port B bit 15 with alternate function SPI2_MOSI |+| 29 | PA8 | bidirectional | 5V-tolerant GPIO Port A bit 8 with alternate functions USART1_CK/MCO |+| 30 | PA9 | bidirectional | 5V-tolerant GPIO Port A bit 9 with alternate function USART1_TX |+| 31 | PA10 | bidirectional | 5V-tolerant GPIO Port A bit 10 with alternate function USART1_RX |+| 32 | PA11 | bidirectional | 5V-tolerant GPIO Port A bit 11 with alternate functions USART1_CTS/USB_DM |+| 33 | PA12 | bidirectional | 5V-tolerant GPIO Port A bit 12 with alternate functions USART1_RTS/USB_DP |+| 34 | PA13 | bidirectional | 5V-tolerant GPIO Port A bit 13 with JTMS-SWDIO debug port Serial Wire Debug I/O |+| 35 | VSS_2 | power_in | Ground connection to external power supply |+| 36 | VDD_2 | power_in | Main supply 2.0-3.6 V for core and I/Os |+| 37 | PA14 | bidirectional | 5V-tolerant GPIO Port A bit 14 with JTCK/SWCLK debug port Serial Wire Debug clock |+| 38 | PA15 | bidirectional | 5V-tolerant GPIO Port A bit 15 with JTDI debug port, alternate functions TIM2_CH1_ETR/SPI1_NSS |+| 39 | PB3 | bidirectional | 5V-tolerant GPIO Port B bit 3 with JTDO debug port, alternate functions TIM2_CH2/TRACESWO/SPI1_SCK |+| 40 | PB4 | bidirectional | 5V-tolerant GPIO Port B bit 4 with JNTRST debug port, alternate functions TIM3_CH1/SPI1_MISO |+| 41 | PB5 | bidirectional | GPIO Port B bit 5 with alternate functions I2C1_SMBA/TIM3_CH2/SPI1_MOSI |+| 42 | PB6 | bidirectional | 5V-tolerant GPIO Port B bit 6 with alternate functions I2C1_SCL/TIM4_CH1/USART1_TX |+| 43 | PB7 | bidirectional | 5V-tolerant GPIO Port B bit 7 with alternate functions I2C1_SDA/TIM4_CH2/USART1_RX |+| 44 | BOOT0 | input | Boot mode selection input, 0 selects user Flash boot 1 selects system memory or SRAM |+| 45 | PB8 | bidirectional | 5V-tolerant GPIO Port B bit 8 with alternate functions TIM4_CH3/I2C1_SCL |+| 46 | PB9 | bidirectional | 5V-tolerant GPIO Port B bit 9 with alternate functions TIM4_CH4/I2C1_SDA |+| 47 | VSS_3 | power_in | Ground connection to external power supply |+| 48 | VDD_3 | power_in | Main supply 2.0-3.6 V for core and I/Os |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | LQFP-48(7x7) |+| Category | Embedded Processors & Controllers |+| Pins | 48 |++## CAD (KiCad official)++- Symbol: `STM32F102C8T6`+- Footprint: `Package_QFP:LQFP-48_7x7mm_P0.5mm`+- 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)+- 3D model files: `stm32f102c8t6-etched.step` / `stm32f102c8t6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32f102c8t6.step` / `stm32f102c8t6.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590921991917039616) (81 pp, sha256 `276652841a00ce34`, retrieved 2026-09-24, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm32f102c8t6-datasheet.pdf)
page.jsonadded+397
@@ -0,0 +1,397 @@+{+  "slug": "stm32f102c8t6",+  "version": "0.1.0",+  "type": "component",+  "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-48(7x7). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "embedded processors & controllers",+    "stm32f102c8t6",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "stm32f102c8t6.kicad_sym",+    "stm32f102c8t6.kicad_mod",+    "stm32f102c8t6.glb",+    "stm32f102c8t6.step",+    "stm32f102c8t6.lbr",+    "docs/hero.png",+    "docs/stm32f102c8t6-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "STM32F102C8T6",+    "manufacturer": "STMicroelectronics",+    "package": "LQFP-48(7x7)",+    "pin_count": 48,+    "category": "Embedded Processors & Controllers",+    "subcategory": "Microcontrollers (MCU/MPU/SOC)",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590921991917039616",+    "parts": {+      "symbol": "stm32f102c8t6.kicad_sym",+      "footprint": "stm32f102c8t6.kicad_mod",+      "model_3d": "stm32f102c8t6-etched.glb",+      "model_3d_plain": "stm32f102c8t6.glb",+      "model_3d_step": "stm32f102c8t6-etched.step",+      "model_3d_step_plain": "stm32f102c8t6.step",+      "lbr": "stm32f102c8t6.lbr"+    },+    "distributor_links": {+      "lcsc": "C2969848",+      "digikey": "497-8307-ND",+      "mouser": "511-STM32F102C8T6"+    },+    "distributor_check": {+      "checked_at": "2026-09-24T22:09:59Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "497-8307-ND",+        "status": "found"+      },+      "mouser": {+        "pn": "511-STM32F102C8T6",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "VBAT",+        "type": "power_in",+        "description": "Backup domain supply 1.8-3.6 V for RTC and backup registers via power switch"+      },+      {+        "number": "2",+        "name": "PC13-TAMPER-RTC",+        "type": "bidirectional",+        "description": "GPIO Port C bit 13 with TAMPER-RTC alternate function for backup domain"+      },+      {+        "number": "3",+        "name": "PC14-OSC32_IN",+        "type": "bidirectional",+        "description": "GPIO Port C bit 14 with OSC32_IN alternate function for 32.768 kHz external oscillator input"+      },+      {+        "number": "4",+        "name": "PC15-OSC32_OUT",+        "type": "bidirectional",+        "description": "GPIO Port C bit 15 with OSC32_OUT alternate function for 32.768 kHz external oscillator output"+      },+      {+        "number": "5",+        "name": "OSC_IN",+        "type": "bidirectional",+        "description": "5V-tolerant external high-speed oscillator input 4-16 MHz, remappable to PD0"+      },+      {+        "number": "6",+        "name": "OSC_OUT",+        "type": "bidirectional",+        "description": "5V-tolerant external high-speed oscillator output, remappable to PD1"+      },+      {+        "number": "7",+        "name": "NRST",+        "type": "bidirectional",+        "description": "Active-low asynchronous reset input with internal pull-up resistor and RC filter recommended"+      },+      {+        "number": "8",+        "name": "VSSA",+        "type": "power_in",+        "description": "Analog ground reference connection for ADC"+      },+      {+        "number": "9",+        "name": "VDDA",+        "type": "power_in",+        "description": "Analog supply 2.4-3.6 V minimum when ADC is used"+      },+      {+        "number": "10",+        "name": "PA0-WKUP",+        "type": "bidirectional",+        "description": "GPIO Port A bit 0 with alternate functions WKUP/USART2_CTS/ADC_IN0/TIM2_CH1_ETR"+      },+      {+        "number": "11",+        "name": "PA1",+        "type": "bidirectional",+        "description": "GPIO Port A bit 1 with alternate functions USART2_RTS/ADC_IN1/TIM2_CH2"+      },+      {+        "number": "12",+        "name": "PA2",+        "type": "bidirectional",+        "description": "GPIO Port A bit 2 with alternate functions USART2_TX/ADC_IN2/TIM2_CH3"+      },+      {+        "number": "13",+        "name": "PA3",+        "type": "bidirectional",+        "description": "GPIO Port A bit 3 with alternate functions USART2_RX/ADC_IN3/TIM2_CH4"+      },+      {+        "number": "14",+        "name": "PA4",+        "type": "bidirectional",+        "description": "GPIO Port A bit 4 with alternate functions SPI1_NSS/ADC_IN4/USART2_CK"+      },+      {+        "number": "15",+        "name": "PA5",+        "type": "bidirectional",+        "description": "GPIO Port A bit 5 with alternate functions SPI1_SCK/ADC_IN5"+      },+      {+        "number": "16",+        "name": "PA6",+        "type": "bidirectional",+        "description": "GPIO Port A bit 6 with alternate functions SPI1_MISO/ADC_IN6/TIM3_CH1"+      },+      {+        "number": "17",+        "name": "PA7",+        "type": "bidirectional",+        "description": "GPIO Port A bit 7 with alternate functions SPI1_MOSI/ADC_IN7/TIM3_CH2"+      },+      {+        "number": "18",+        "name": "PB0",+        "type": "bidirectional",+        "description": "GPIO Port B bit 0 with alternate functions ADC_IN8/TIM3_CH3"+      },+      {+        "number": "19",+        "name": "PB1",+        "type": "bidirectional",+        "description": "GPIO Port B bit 1 with alternate functions ADC_IN9/TIM3_CH4"+      },+      {+        "number": "20",+        "name": "PB2",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO Port B bit 2 with BOOT1 alternate function"+      },+      {+        "number": "21",+        "name": "PB10",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO Port B bit 10 with alternate functions I2C2_SCL/USART3_TX/TIM2_CH3"+      },+      {+        "number": "22",+        "name": "PB11",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO Port B bit 11 with alternate functions I2C2_SDA/USART3_RX/TIM2_CH4"+      },+      {+        "number": "23",+        "name": "VSS_1",+        "type": "power_in",+        "description": "Ground connection to external power supply"+      },+      {+        "number": "24",+        "name": "VDD_1",+        "type": "power_in",+        "description": "Main supply 2.0-3.6 V for core and I/Os"+      },+      {+        "number": "25",+        "name": "PB12",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO Port B bit 12 with alternate functions SPI2_NSS/I2C2_SMBA/USART3_CK"+      },+      {+        "number": "26",+        "name": "PB13",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO Port B bit 13 with alternate functions SPI2_SCK/USART3_CTS"+      },+      {+        "number": "27",+        "name": "PB14",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO Port B bit 14 with alternate functions SPI2_MISO/USART3_RTS"+      },+      {+        "number": "28",+        "name": "PB15",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO Port B bit 15 with alternate function SPI2_MOSI"+      },+      {+        "number": "29",+        "name": "PA8",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO Port A bit 8 with alternate functions USART1_CK/MCO"+      },+      {+        "number": "30",+        "name": "PA9",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO Port A bit 9 with alternate function USART1_TX"+      },+      {+        "number": "31",+        "name": "PA10",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO Port A bit 10 with alternate function USART1_RX"+      },+      {+        "number": "32",+        "name": "PA11",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO Port A bit 11 with alternate functions USART1_CTS/USB_DM"+      },+      {+        "number": "33",+        "name": "PA12",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO Port A bit 12 with alternate functions USART1_RTS/USB_DP"+      },+      {+        "number": "34",+        "name": "PA13",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO Port A bit 13 with JTMS-SWDIO debug port Serial Wire Debug I/O"+      },+      {+        "number": "35",+        "name": "VSS_2",+        "type": "power_in",+        "description": "Ground connection to external power supply"+      },+      {+        "number": "36",+        "name": "VDD_2",+        "type": "power_in",+        "description": "Main supply 2.0-3.6 V for core and I/Os"+      },+      {+        "number": "37",+        "name": "PA14",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO Port A bit 14 with JTCK/SWCLK debug port Serial Wire Debug clock"+      },+      {+        "number": "38",+        "name": "PA15",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO Port A bit 15 with JTDI debug port, alternate functions TIM2_CH1_ETR/SPI1_NSS"+      },+      {+        "number": "39",+        "name": "PB3",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO Port B bit 3 with JTDO debug port, alternate functions TIM2_CH2/TRACESWO/SPI1_SCK"+      },+      {+        "number": "40",+        "name": "PB4",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO Port B bit 4 with JNTRST debug port, alternate functions TIM3_CH1/SPI1_MISO"+      },+      {+        "number": "41",+        "name": "PB5",+        "type": "bidirectional",+        "description": "GPIO Port B bit 5 with alternate functions I2C1_SMBA/TIM3_CH2/SPI1_MOSI"+      },+      {+        "number": "42",+        "name": "PB6",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO Port B bit 6 with alternate functions I2C1_SCL/TIM4_CH1/USART1_TX"+      },+      {+        "number": "43",+        "name": "PB7",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO Port B bit 7 with alternate functions I2C1_SDA/TIM4_CH2/USART1_RX"+      },+      {+        "number": "44",+        "name": "BOOT0",+        "type": "input",+        "description": "Boot mode selection input, 0 selects user Flash boot 1 selects system memory or SRAM"+      },+      {+        "number": "45",+        "name": "PB8",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO Port B bit 8 with alternate functions TIM4_CH3/I2C1_SCL"+      },+      {+        "number": "46",+        "name": "PB9",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO Port B bit 9 with alternate functions TIM4_CH4/I2C1_SDA"+      },+      {+        "number": "47",+        "name": "VSS_3",+        "type": "power_in",+        "description": "Ground connection to external power supply"+      },+      {+        "number": "48",+        "name": "VDD_3",+        "type": "power_in",+        "description": "Main supply 2.0-3.6 V for core and I/Os"+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: All MCU pins extracted from Table 4 (Medium-density STM32F102xx pin definitions), pages 21-23. Pin t"+        ],+        "pages_sent": 81,+        "cost_usd": 0.8555,+        "at": "2026-09-24T22:09:29"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590921991917039616",+        "pages": 81,+        "sha256": "276652841a00ce34",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 48,+        "described": 48,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file