component
STM32F101RBT6
Public Made by Adomby adom
STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-64(10x10). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+100@@ -0,0 +1,100 @@+# STM32F101RBT6++**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · LQFP-64(10x10)++STM32F101RBT6 from STMicroelectronics, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VBAT | power_in | Backup-domain supply input for the RTC and backup registers. |+| 2 | PC13-TAMPER-RTC | bidirectional | Standard I/O (not 5 V tolerant) that is powered through the power switch, which sinks only 3 mA, so it must not exceed 2 MHz at 30 pF load and must not be used as a current source. |+| 3 | PC14-OSC32_IN | bidirectional | Standard I/O (not 5 V tolerant) with OSC32_IN function, powered through the power switch with the same limits as PC13 (3 mA, 2 MHz at 30 pF, no current sourcing). |+| 4 | PC15-OSC32_OUT | bidirectional | Standard I/O (not 5 V tolerant) with OSC32_OUT function, powered through the power switch with the same limits as PC13 (3 mA, 2 MHz at 30 pF, no current sourcing). |+| 5 | OSC_IN | input | High-speed external oscillator input (4-16 MHz) configured after reset; PD0 becomes a 5 V tolerant GPIO only when remapped by software, and its output mode is limited to 50 MHz. |+| 6 | OSC_OUT | output | High-speed external oscillator output configured after reset; PD1 becomes a 5 V tolerant GPIO only when remapped by software, and its output mode is limited to 50 MHz. |+| 7 | NRST | bidirectional | Device reset pin; its electrical limits are specified in the NRST pin characteristics section. |+| 8 | PC0 | bidirectional | General-purpose I/O (not 5 V tolerant) that doubles as ADC input channel ADC_IN10. |+| 9 | PC1 | bidirectional | General-purpose I/O (not 5 V tolerant) that doubles as ADC input channel ADC_IN11. |+| 10 | PC2 | bidirectional | General-purpose I/O (not 5 V tolerant) that doubles as ADC input channel ADC_IN12. |+| 11 | PC3 | bidirectional | General-purpose I/O (not 5 V tolerant) that doubles as ADC input channel ADC_IN13. |+| 12 | VSSA | power_in | Analog ground reference for the ADC and analog circuitry. |+| 13 | VDDA | power_in | Analog supply for the ADC; the ADC characteristics specify VDDA from 2.4 V to 3.6 V. |+| 14 | PA0-WKUP | bidirectional | General-purpose I/O (not 5 V tolerant) with WKUP wake-up, USART2_CTS, ADC_IN0 and TIM2_CH1_ETR alternate functions. |+| 15 | PA1 | bidirectional | General-purpose I/O (not 5 V tolerant) with USART2_RTS, ADC_IN1 and TIM2_CH2 alternate functions. |+| 16 | PA2 | bidirectional | General-purpose I/O (not 5 V tolerant) with USART2_TX, ADC_IN2 and TIM2_CH3 alternate functions. |+| 17 | PA3 | bidirectional | General-purpose I/O (not 5 V tolerant) with USART2_RX, ADC_IN3 and TIM2_CH4 alternate functions. |+| 18 | VSS_4 | power_in | Digital ground. |+| 19 | VDD_4 | power_in | Digital supply for I/Os, 2.0 to 3.6 V application supply. |+| 20 | PA4 | bidirectional | General-purpose I/O (not 5 V tolerant) with SPI1_NSS, USART2_CK and ADC_IN4 alternate functions. |+| 21 | PA5 | bidirectional | General-purpose I/O (not 5 V tolerant) with SPI1_SCK and ADC_IN5 alternate functions. |+| 22 | PA6 | bidirectional | General-purpose I/O (not 5 V tolerant) with SPI1_MISO, TIM3_CH1 and ADC_IN6 alternate functions. |+| 23 | PA7 | bidirectional | General-purpose I/O (not 5 V tolerant) with SPI1_MOSI, TIM3_CH2 and ADC_IN7 alternate functions. |+| 24 | PC4 | bidirectional | General-purpose I/O (not 5 V tolerant) that doubles as ADC input channel ADC_IN14. |+| 25 | PC5 | bidirectional | General-purpose I/O (not 5 V tolerant) that doubles as ADC input channel ADC_IN15. |+| 26 | PB0 | bidirectional | General-purpose I/O (not 5 V tolerant) with ADC_IN8 and TIM3_CH3 alternate functions. |+| 27 | PB1 | bidirectional | General-purpose I/O (not 5 V tolerant) with ADC_IN9 and TIM3_CH4 alternate functions. |+| 28 | PB2/BOOT1 | bidirectional | 5 V tolerant general-purpose I/O that shares its function with the BOOT1 boot-mode input. |+| 29 | PB10 | bidirectional | 5 V tolerant general-purpose I/O with I2C2_SCL, USART3_TX and TIM2_CH3 alternate functions. |+| 30 | PB11 | bidirectional | 5 V tolerant general-purpose I/O with I2C2_SDA, USART3_RX and TIM2_CH4 alternate functions. |+| 31 | VSS_1 | power_in | Digital ground. |+| 32 | VDD_1 | power_in | Digital supply for I/Os, 2.0 to 3.6 V application supply. |+| 33 | PB12 | bidirectional | 5 V tolerant general-purpose I/O with SPI2_NSS, I2C2_SMBA and USART3_CK alternate functions. |+| 34 | PB13 | bidirectional | 5 V tolerant general-purpose I/O with SPI2_SCK and USART3_CTS alternate functions. |+| 35 | PB14 | bidirectional | 5 V tolerant general-purpose I/O with SPI2_MISO and USART3_RTS alternate functions. |+| 36 | PB15 | bidirectional | 5 V tolerant general-purpose I/O with SPI2_MOSI alternate function. |+| 37 | PC6 | bidirectional | 5 V tolerant general-purpose I/O with TIM3_CH1 alternate function. |+| 38 | PC7 | bidirectional | 5 V tolerant general-purpose I/O with TIM3_CH2 alternate function. |+| 39 | PC8 | bidirectional | 5 V tolerant general-purpose I/O with TIM3_CH3 alternate function. |+| 40 | PC9 | bidirectional | 5 V tolerant general-purpose I/O with TIM3_CH4 alternate function. |+| 41 | PA8 | bidirectional | 5 V tolerant general-purpose I/O with USART1_CK and MCO alternate functions. |+| 42 | PA9 | bidirectional | 5 V tolerant general-purpose I/O with USART1_TX alternate function. |+| 43 | PA10 | bidirectional | 5 V tolerant general-purpose I/O with USART1_RX alternate function. |+| 44 | PA11 | bidirectional | 5 V tolerant general-purpose I/O with USART1_CTS alternate function. |+| 45 | PA12 | bidirectional | 5 V tolerant general-purpose I/O with USART1_RTS alternate function. |+| 46 | PA13 | bidirectional | 5 V tolerant general-purpose I/O that after reset carries the JTMS-SWDIO debug function. |+| 47 | VSS_2 | power_in | Digital ground. |+| 48 | VDD_2 | power_in | Digital supply for I/Os, 2.0 to 3.6 V application supply. |+| 49 | PA14 | bidirectional | 5 V tolerant general-purpose I/O that after reset carries the JTCK-SWCLK debug function. |+| 50 | PA15 | bidirectional | 5 V tolerant general-purpose I/O with JTDI (debug), TIM2_CH1_ETR and SPI1_NSS alternate functions. |+| 51 | PC10 | bidirectional | 5 V tolerant general-purpose I/O with USART3_TX alternate function. |+| 52 | PC11 | bidirectional | 5 V tolerant general-purpose I/O with USART3_RX alternate function. |+| 53 | PC12 | bidirectional | 5 V tolerant general-purpose I/O with USART3_CK alternate function. |+| 54 | PD2 | bidirectional | 5 V tolerant general-purpose I/O with TIM3_ETR alternate function. |+| 55 | PB3 | bidirectional | 5 V tolerant general-purpose I/O that after reset carries JTDO, with TIM2_CH2, SPI1_SCK and TRACESWO alternate functions. |+| 56 | PB4 | bidirectional | 5 V tolerant general-purpose I/O that after reset carries JNTRST, with TIM3_CH1 and SPI1_MISO alternate functions. |+| 57 | PB5 | bidirectional | General-purpose I/O (not 5 V tolerant) with I2C1_SMBA, TIM3_CH2 and SPI1_MOSI alternate functions. |+| 58 | PB6 | bidirectional | 5 V tolerant general-purpose I/O with I2C1_SCL, TIM4_CH1 and USART1_TX alternate functions. |+| 59 | PB7 | bidirectional | 5 V tolerant general-purpose I/O with I2C1_SDA, TIM4_CH2 and USART1_RX alternate functions. |+| 60 | BOOT0 | input | Boot mode selection input; the device memory map is aliased to Flash or system memory depending on the BOOT pins. |+| 61 | PB8 | bidirectional | 5 V tolerant general-purpose I/O with TIM4_CH3 and I2C1_SCL alternate functions. |+| 62 | PB9 | bidirectional | 5 V tolerant general-purpose I/O with TIM4_CH4 and I2C1_SDA alternate functions. |+| 63 | VSS_3 | power_in | Digital ground. |+| 64 | VDD_3 | power_in | Digital supply for I/Os, 2.0 to 3.6 V application supply. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | LQFP-64(10x10) |+| Category | Embedded Processors & Controllers |+| Pins | 64 |++## CAD (KiCad official)++- Symbol: `STM32F101RBT6`+- Footprint: `Package_QFP:LQFP-64_10x10mm_P0.5mm`+- 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)+- 3D model files: `stm32f101rbt6-etched.step` / `stm32f101rbt6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32f101rbt6.step` / `stm32f101rbt6.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586172460912029696) (90 pp, sha256 `cf9864b2eb00694d`, retrieved 2026-10-08, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm32f101rbt6-datasheet.pdf)
page.jsonadded+535@@ -0,0 +1,535 @@+{+ "slug": "stm32f101rbt6",+ "version": "0.1.0",+ "type": "component",+ "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-64(10x10). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "embedded processors & controllers",+ "stm32f101rbt6",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "stm32f101rbt6.kicad_sym",+ "stm32f101rbt6.kicad_mod",+ "stm32f101rbt6.glb",+ "stm32f101rbt6.step",+ "stm32f101rbt6.lbr",+ "docs/hero.png",+ "docs/stm32f101rbt6-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "stm32f101rbt6-hero.glb",+ "stm32f101rbt6-hero.overlay.json"+ ],+ "component": {+ "mpn": "STM32F101RBT6",+ "manufacturer": "STMicroelectronics",+ "package": "LQFP-64(10x10)",+ "pin_count": 64,+ "category": "Embedded Processors & Controllers",+ "subcategory": "Microcontrollers (MCU/MPU/SOC)",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586172460912029696",+ "parts": {+ "symbol": "stm32f101rbt6.kicad_sym",+ "footprint": "stm32f101rbt6.kicad_mod",+ "model_3d": "stm32f101rbt6-hero.glb",+ "model_3d_plain": "stm32f101rbt6.glb",+ "model_3d_step": "stm32f101rbt6-etched.step",+ "model_3d_step_plain": "stm32f101rbt6.step",+ "lbr": "stm32f101rbt6.lbr"+ },+ "distributor_links": {+ "lcsc": "C8348",+ "digikey": "497-6059-ND",+ "mouser": "511-STM32F101RBT6"+ },+ "distributor_check": {+ "checked_at": "2026-10-08T01:54:26Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "497-6059-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "511-STM32F101RBT6",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "VBAT",+ "type": "power_in",+ "description": "Backup-domain supply input for the RTC and backup registers."+ },+ {+ "number": "2",+ "name": "PC13-TAMPER-RTC",+ "type": "bidirectional",+ "description": "Standard I/O (not 5 V tolerant) that is powered through the power switch, which sinks only 3 mA, so it must not exceed 2 MHz at 30 pF load and must not be used as a current source."+ },+ {+ "number": "3",+ "name": "PC14-OSC32_IN",+ "type": "bidirectional",+ "description": "Standard I/O (not 5 V tolerant) with OSC32_IN function, powered through the power switch with the same limits as PC13 (3 mA, 2 MHz at 30 pF, no current sourcing)."+ },+ {+ "number": "4",+ "name": "PC15-OSC32_OUT",+ "type": "bidirectional",+ "description": "Standard I/O (not 5 V tolerant) with OSC32_OUT function, powered through the power switch with the same limits as PC13 (3 mA, 2 MHz at 30 pF, no current sourcing)."+ },+ {+ "number": "5",+ "name": "OSC_IN",+ "type": "input",+ "description": "High-speed external oscillator input (4-16 MHz) configured after reset; PD0 becomes a 5 V tolerant GPIO only when remapped by software, and its output mode is limited to 50 MHz."+ },+ {+ "number": "6",+ "name": "OSC_OUT",+ "type": "output",+ "description": "High-speed external oscillator output configured after reset; PD1 becomes a 5 V tolerant GPIO only when remapped by software, and its output mode is limited to 50 MHz."+ },+ {+ "number": "7",+ "name": "NRST",+ "type": "bidirectional",+ "description": "Device reset pin; its electrical limits are specified in the NRST pin characteristics section."+ },+ {+ "number": "8",+ "name": "PC0",+ "type": "bidirectional",+ "description": "General-purpose I/O (not 5 V tolerant) that doubles as ADC input channel ADC_IN10."+ },+ {+ "number": "9",+ "name": "PC1",+ "type": "bidirectional",+ "description": "General-purpose I/O (not 5 V tolerant) that doubles as ADC input channel ADC_IN11."+ },+ {+ "number": "10",+ "name": "PC2",+ "type": "bidirectional",+ "description": "General-purpose I/O (not 5 V tolerant) that doubles as ADC input channel ADC_IN12."+ },+ {+ "number": "11",+ "name": "PC3",+ "type": "bidirectional",+ "description": "General-purpose I/O (not 5 V tolerant) that doubles as ADC input channel ADC_IN13."+ },+ {+ "number": "12",+ "name": "VSSA",+ "type": "power_in",+ "description": "Analog ground reference for the ADC and analog circuitry."+ },+ {+ "number": "13",+ "name": "VDDA",+ "type": "power_in",+ "description": "Analog supply for the ADC; the ADC characteristics specify VDDA from 2.4 V to 3.6 V."+ },+ {+ "number": "14",+ "name": "PA0-WKUP",+ "type": "bidirectional",+ "description": "General-purpose I/O (not 5 V tolerant) with WKUP wake-up, USART2_CTS, ADC_IN0 and TIM2_CH1_ETR alternate functions."+ },+ {+ "number": "15",+ "name": "PA1",+ "type": "bidirectional",+ "description": "General-purpose I/O (not 5 V tolerant) with USART2_RTS, ADC_IN1 and TIM2_CH2 alternate functions."+ },+ {+ "number": "16",+ "name": "PA2",+ "type": "bidirectional",+ "description": "General-purpose I/O (not 5 V tolerant) with USART2_TX, ADC_IN2 and TIM2_CH3 alternate functions."+ },+ {+ "number": "17",+ "name": "PA3",+ "type": "bidirectional",+ "description": "General-purpose I/O (not 5 V tolerant) with USART2_RX, ADC_IN3 and TIM2_CH4 alternate functions."+ },+ {+ "number": "18",+ "name": "VSS_4",+ "type": "power_in",+ "description": "Digital ground."+ },+ {+ "number": "19",+ "name": "VDD_4",+ "type": "power_in",+ "description": "Digital supply for I/Os, 2.0 to 3.6 V application supply."+ },+ {+ "number": "20",+ "name": "PA4",+ "type": "bidirectional",+ "description": "General-purpose I/O (not 5 V tolerant) with SPI1_NSS, USART2_CK and ADC_IN4 alternate functions."+ },+ {+ "number": "21",+ "name": "PA5",+ "type": "bidirectional",+ "description": "General-purpose I/O (not 5 V tolerant) with SPI1_SCK and ADC_IN5 alternate functions."+ },+ {+ "number": "22",+ "name": "PA6",+ "type": "bidirectional",+ "description": "General-purpose I/O (not 5 V tolerant) with SPI1_MISO, TIM3_CH1 and ADC_IN6 alternate functions."+ },+ {+ "number": "23",+ "name": "PA7",+ "type": "bidirectional",+ "description": "General-purpose I/O (not 5 V tolerant) with SPI1_MOSI, TIM3_CH2 and ADC_IN7 alternate functions."+ },+ {+ "number": "24",+ "name": "PC4",+ "type": "bidirectional",+ "description": "General-purpose I/O (not 5 V tolerant) that doubles as ADC input channel ADC_IN14."+ },+ {+ "number": "25",+ "name": "PC5",+ "type": "bidirectional",+ "description": "General-purpose I/O (not 5 V tolerant) that doubles as ADC input channel ADC_IN15."+ },+ {+ "number": "26",+ "name": "PB0",+ "type": "bidirectional",+ "description": "General-purpose I/O (not 5 V tolerant) with ADC_IN8 and TIM3_CH3 alternate functions."+ },+ {+ "number": "27",+ "name": "PB1",+ "type": "bidirectional",+ "description": "General-purpose I/O (not 5 V tolerant) with ADC_IN9 and TIM3_CH4 alternate functions."+ },+ {+ "number": "28",+ "name": "PB2/BOOT1",+ "type": "bidirectional",+ "description": "5 V tolerant general-purpose I/O that shares its function with the BOOT1 boot-mode input."+ },+ {+ "number": "29",+ "name": "PB10",+ "type": "bidirectional",+ "description": "5 V tolerant general-purpose I/O with I2C2_SCL, USART3_TX and TIM2_CH3 alternate functions."+ },+ {+ "number": "30",+ "name": "PB11",+ "type": "bidirectional",+ "description": "5 V tolerant general-purpose I/O with I2C2_SDA, USART3_RX and TIM2_CH4 alternate functions."+ },+ {+ "number": "31",+ "name": "VSS_1",+ "type": "power_in",+ "description": "Digital ground."+ },+ {+ "number": "32",+ "name": "VDD_1",+ "type": "power_in",+ "description": "Digital supply for I/Os, 2.0 to 3.6 V application supply."+ },+ {+ "number": "33",+ "name": "PB12",+ "type": "bidirectional",+ "description": "5 V tolerant general-purpose I/O with SPI2_NSS, I2C2_SMBA and USART3_CK alternate functions."+ },+ {+ "number": "34",+ "name": "PB13",+ "type": "bidirectional",+ "description": "5 V tolerant general-purpose I/O with SPI2_SCK and USART3_CTS alternate functions."+ },+ {+ "number": "35",+ "name": "PB14",+ "type": "bidirectional",+ "description": "5 V tolerant general-purpose I/O with SPI2_MISO and USART3_RTS alternate functions."+ },+ {+ "number": "36",+ "name": "PB15",+ "type": "bidirectional",+ "description": "5 V tolerant general-purpose I/O with SPI2_MOSI alternate function."+ },+ {+ "number": "37",+ "name": "PC6",+ "type": "bidirectional",+ "description": "5 V tolerant general-purpose I/O with TIM3_CH1 alternate function."+ },+ {+ "number": "38",+ "name": "PC7",+ "type": "bidirectional",+ "description": "5 V tolerant general-purpose I/O with TIM3_CH2 alternate function."+ },+ {+ "number": "39",+ "name": "PC8",+ "type": "bidirectional",+ "description": "5 V tolerant general-purpose I/O with TIM3_CH3 alternate function."+ },+ {+ "number": "40",+ "name": "PC9",+ "type": "bidirectional",+ "description": "5 V tolerant general-purpose I/O with TIM3_CH4 alternate function."+ },+ {+ "number": "41",+ "name": "PA8",+ "type": "bidirectional",+ "description": "5 V tolerant general-purpose I/O with USART1_CK and MCO alternate functions."+ },+ {+ "number": "42",+ "name": "PA9",+ "type": "bidirectional",+ "description": "5 V tolerant general-purpose I/O with USART1_TX alternate function."+ },+ {+ "number": "43",+ "name": "PA10",+ "type": "bidirectional",+ "description": "5 V tolerant general-purpose I/O with USART1_RX alternate function."+ },+ {+ "number": "44",+ "name": "PA11",+ "type": "bidirectional",+ "description": "5 V tolerant general-purpose I/O with USART1_CTS alternate function."+ },+ {+ "number": "45",+ "name": "PA12",+ "type": "bidirectional",+ "description": "5 V tolerant general-purpose I/O with USART1_RTS alternate function."+ },+ {+ "number": "46",+ "name": "PA13",+ "type": "bidirectional",+ "description": "5 V tolerant general-purpose I/O that after reset carries the JTMS-SWDIO debug function."+ },+ {+ "number": "47",+ "name": "VSS_2",+ "type": "power_in",+ "description": "Digital ground."+ },+ {+ "number": "48",+ "name": "VDD_2",+ "type": "power_in",+ "description": "Digital supply for I/Os, 2.0 to 3.6 V application supply."+ },+ {+ "number": "49",+ "name": "PA14",+ "type": "bidirectional",+ "description": "5 V tolerant general-purpose I/O that after reset carries the JTCK-SWCLK debug function."+ },+ {+ "number": "50",+ "name": "PA15",+ "type": "bidirectional",+ "description": "5 V tolerant general-purpose I/O with JTDI (debug), TIM2_CH1_ETR and SPI1_NSS alternate functions."+ },+ {+ "number": "51",+ "name": "PC10",+ "type": "bidirectional",+ "description": "5 V tolerant general-purpose I/O with USART3_TX alternate function."+ },+ {+ "number": "52",+ "name": "PC11",+ "type": "bidirectional",+ "description": "5 V tolerant general-purpose I/O with USART3_RX alternate function."+ },+ {+ "number": "53",+ "name": "PC12",+ "type": "bidirectional",+ "description": "5 V tolerant general-purpose I/O with USART3_CK alternate function."+ },+ {+ "number": "54",+ "name": "PD2",+ "type": "bidirectional",+ "description": "5 V tolerant general-purpose I/O with TIM3_ETR alternate function."+ },+ {+ "number": "55",+ "name": "PB3",+ "type": "bidirectional",+ "description": "5 V tolerant general-purpose I/O that after reset carries JTDO, with TIM2_CH2, SPI1_SCK and TRACESWO alternate functions."+ },+ {+ "number": "56",+ "name": "PB4",+ "type": "bidirectional",+ "description": "5 V tolerant general-purpose I/O that after reset carries JNTRST, with TIM3_CH1 and SPI1_MISO alternate functions."+ },+ {+ "number": "57",+ "name": "PB5",+ "type": "bidirectional",+ "description": "General-purpose I/O (not 5 V tolerant) with I2C1_SMBA, TIM3_CH2 and SPI1_MOSI alternate functions."+ },+ {+ "number": "58",+ "name": "PB6",+ "type": "bidirectional",+ "description": "5 V tolerant general-purpose I/O with I2C1_SCL, TIM4_CH1 and USART1_TX alternate functions."+ },+ {+ "number": "59",+ "name": "PB7",+ "type": "bidirectional",+ "description": "5 V tolerant general-purpose I/O with I2C1_SDA, TIM4_CH2 and USART1_RX alternate functions."+ },+ {+ "number": "60",+ "name": "BOOT0",+ "type": "input",+ "description": "Boot mode selection input; the device memory map is aliased to Flash or system memory depending on the BOOT pins."+ },+ {+ "number": "61",+ "name": "PB8",+ "type": "bidirectional",+ "description": "5 V tolerant general-purpose I/O with TIM4_CH3 and I2C1_SCL alternate functions."+ },+ {+ "number": "62",+ "name": "PB9",+ "type": "bidirectional",+ "description": "5 V tolerant general-purpose I/O with TIM4_CH4 and I2C1_SDA alternate functions."+ },+ {+ "number": "63",+ "name": "VSS_3",+ "type": "power_in",+ "description": "Digital ground."+ },+ {+ "number": "64",+ "name": "VDD_3",+ "type": "power_in",+ "description": "Digital supply for I/Os, 2.0 to 3.6 V application supply."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Table 4 text was extracted from a PDF with merged columns (e.g. '2 27-' for LQFP48=2, LQFP64=2, LQFP; MPN STM32F101RBT6 maps to LQFP package (T), 64 pins (R), 128 KB Flash (B) per Table 53, and the LQFP; Pins 2 to 4 (PC13 to PC15) are powered through the power switch with a 3 mA sink limit; pins 5 and 6"+ ],+ "pages_sent": 39,+ "cost_usd": 0.2308,+ "at": "2026-10-08T01:53:58"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586172460912029696",+ "pages": 90,+ "sha256": "cf9864b2eb00694d",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 64,+ "described": 64,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "stm32f101rbt6.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 12,+ 12,+ 1.5+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "b0c827bc5c05552175d28affe44a5bd2ab45c9c36efff6ff07a74cc449b13db4",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "stm32f101rbt6-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 12,+ 12,+ 1.5+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "b16cf13b7eb007c6dd9b737f997b9aa2856198de87805b6a226ddd9a04428f36",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}