← Commit history
README.mdadded+84@@ -0,0 +1,84 @@+# STM32F100CBT6B++**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · LQFP-48(7x7)++STM32F100CBT6B from STMicroelectronics, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VBAT | power_in | Backup domain power supply for RTC, backup registers, and 32 kHz oscillator; 1.8 to 3.6 V. |+| 2 | PC13-TAMPER-RTC | bidirectional | I/O port C pin 13; 5V tolerant; output mode restricted to 2 MHz with 30 pF load maximum due to 3 mA current limit through power switch. |+| 3 | PC14-OSC32_IN | bidirectional | I/O port C pin 14; 5V tolerant; output mode restricted to 2 MHz with 30 pF load maximum due to 3 mA current limit through power switch. |+| 4 | PC15-OSC32_OUT | bidirectional | I/O port C pin 15; 5V tolerant; output mode restricted to 2 MHz with 30 pF load maximum due to 3 mA current limit through power switch. |+| 5 | OSC_IN | input | External high-speed oscillator input for 4 to 24 MHz crystal or clock source; can be remapped to PD0. |+| 6 | OSC_OUT | output | External high-speed oscillator output connected to crystal resonator; can be remapped to PD1. |+| 7 | NRST | input | Active-low reset input with 30-50 kΩ internal pull-up resistor; input low level voltage maximum 0.8 V. |+| 8 | VSSA | power_in | Analog ground for ADC, DAC, voltage regulator, and phase-locked loop circuits. |+| 9 | VDDA | power_in | Analog power supply for ADC, DAC, and analog circuits; 2.4 to 3.6 V when ADC or DAC is used. |+| 10 | PA0-WKUP | bidirectional | I/O port A pin 0 with wakeup capability; alternate functions include USART2_CTS, ADC1 channel 0, and timer input. |+| 11 | PA1 | bidirectional | I/O port A pin 1; alternate functions include USART2_RTS, ADC1 channel 1, and timer input. |+| 12 | PA2 | bidirectional | I/O port A pin 2; alternate functions include USART2_TX, ADC1 channel 2, and timer input/output. |+| 13 | PA3 | bidirectional | I/O port A pin 3; alternate functions include USART2_RX, ADC1 channel 3, and timer input/output. |+| 14 | PA4 | bidirectional | I/O port A pin 4; alternate functions include SPI1_NSS, USART2_CK, ADC1 channel 4, and DAC1 output. |+| 15 | PA5 | bidirectional | I/O port A pin 5; alternate functions include SPI1_SCK, ADC1 channel 5, and DAC2 output. |+| 16 | PA6 | bidirectional | I/O port A pin 6; 5V tolerant; alternate functions include SPI1_MISO, ADC1 channel 6, and timer input/output. |+| 17 | PA7 | bidirectional | I/O port A pin 7; 5V tolerant; alternate functions include SPI1_MOSI, ADC1 channel 7, and timer input/output. |+| 18 | PB0 | bidirectional | I/O port B pin 0; alternate functions include ADC1 channel 8 and timer input/output. |+| 19 | PB1 | bidirectional | I/O port B pin 1; alternate functions include ADC1 channel 9 and timer input/output. |+| 20 | PB2 | bidirectional | I/O port B pin 2; 5V tolerant; alternate function BOOT1 for boot mode selection. |+| 21 | PB10 | bidirectional | I/O port B pin 10; 5V tolerant; alternate functions include I2C2_SCL, USART3_TX, timer input/output, and HDMI-CEC. |+| 22 | PB11 | bidirectional | I/O port B pin 11; 5V tolerant; alternate functions include I2C2_SDA, USART3_RX, and timer input/output. |+| 23 | VSS_1 | power_in | Ground connection for digital circuits and I/O pins. |+| 24 | VDD_1 | power_in | Main power supply for digital circuits; 2.0 to 3.6 V. |+| 25 | PB12 | bidirectional | I/O port B pin 12; 5V tolerant; alternate functions include SPI2_NSS, I2C2_SMBA, timer input, and USART3_CK. |+| 26 | PB13 | bidirectional | I/O port B pin 13; 5V tolerant; alternate functions include SPI2_SCK, timer input, and USART3_CTS. |+| 27 | PB14 | bidirectional | I/O port B pin 14; 5V tolerant; alternate functions include SPI2_MISO, timer input/output, and USART3_RTS. |+| 28 | PB15 | bidirectional | I/O port B pin 15; 5V tolerant; alternate functions include SPI2_MOSI and timer input/output. |+| 29 | PA8 | bidirectional | I/O port A pin 8; 5V tolerant; alternate functions include USART1_CK, MCO clock output, and timer input/output. |+| 30 | PA9 | bidirectional | I/O port A pin 9; 5V tolerant; alternate functions include USART1_TX and timer input/output. |+| 31 | PA10 | bidirectional | I/O port A pin 10; 5V tolerant; alternate functions include USART1_RX and timer input/output. |+| 32 | PA11 | bidirectional | I/O port A pin 11; 5V tolerant; alternate functions include USART1_CTS and timer input/output. |+| 33 | PA12 | bidirectional | I/O port A pin 12; 5V tolerant; alternate functions include USART1_RTS and timer input. |+| 34 | PA13 | bidirectional | I/O port A pin 13; 5V tolerant; JTAG Test Mode Select/Serial Wire Debug I/O line shared with debugging interface. |+| 35 | VSS_2 | power_in | Ground connection for digital circuits and I/O pins. |+| 36 | VDD_2 | power_in | Main power supply for digital circuits; 2.0 to 3.6 V. |+| 37 | PA14 | bidirectional | I/O port A pin 14; 5V tolerant; JTAG Test Clock/Serial Wire Debug Clock line shared with debugging interface. |+| 38 | PA15 | bidirectional | I/O port A pin 15; 5V tolerant; alternate functions include JTAG Test Data In, timer input/output, and SPI1_NSS. |+| 39 | PB3 | bidirectional | I/O port B pin 3; 5V tolerant; alternate functions include JTAG Test Data Out, timer input/output, and SPI1_SCK. |+| 40 | PB4 | bidirectional | I/O port B pin 4; 5V tolerant; alternate functions include JTAG not Test Reset, timer input/output, and SPI1_MISO. |+| 41 | PB5 | bidirectional | I/O port B pin 5; alternate functions include I2C1_SMBA, timer input, and SPI1_MOSI. |+| 42 | PB6 | bidirectional | I/O port B pin 6; 5V tolerant; alternate functions include I2C1_SCL, timer input/output, and USART1_TX. |+| 43 | PB7 | bidirectional | I/O port B pin 7; 5V tolerant; alternate functions include I2C1_SDA, timer input/output, and USART1_RX. |+| 44 | BOOT0 | input | Boot mode selection pin sampled at reset to select boot from Flash memory, system memory, or embedded SRAM. |+| 45 | PB8 | bidirectional | I/O port B pin 8; 5V tolerant; alternate functions include timer input/output, I2C1_SCL, and HDMI-CEC. |+| 46 | PB9 | bidirectional | I/O port B pin 9; 5V tolerant; alternate functions include timer input/output and I2C1_SDA. |+| 47 | VSS_3 | power_in | Ground connection for digital circuits and I/O pins. |+| 48 | VDD_3 | power_in | Main power supply for digital circuits; 2.0 to 3.6 V. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | LQFP-48(7x7) |+| Category | Embedded Processors & Controllers |+| Pins | 48 |++## CAD (KiCad official)++- Symbol: `STM32F100CBT6B`+- Footprint: `Package_QFP:LQFP-48_7x7mm_P0.5mm`+- 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)+- 3D model files: `stm32f100cbt6b-etched.step` / `stm32f100cbt6b-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32f100cbt6b.step` / `stm32f100cbt6b.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586158842015465472) (88 pp, sha256 `c810aafb848820fa`, retrieved 2026-09-23, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm32f100cbt6b-datasheet.pdf)
page.jsonadded+381@@ -0,0 +1,381 @@+{+ "slug": "stm32f100cbt6b",+ "version": "0.1.0",+ "type": "component",+ "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-48(7x7). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "embedded processors & controllers",+ "stm32f100cbt6b",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "stm32f100cbt6b.kicad_sym",+ "stm32f100cbt6b.kicad_mod",+ "stm32f100cbt6b.glb",+ "stm32f100cbt6b.step",+ "stm32f100cbt6b.lbr",+ "docs/hero.png",+ "docs/stm32f100cbt6b-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "STM32F100CBT6B",+ "manufacturer": "STMicroelectronics",+ "package": "LQFP-48(7x7)",+ "pin_count": 48,+ "category": "Embedded Processors & Controllers",+ "subcategory": "Microcontrollers (MCU/MPU/SOC)",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586158842015465472",+ "parts": {+ "symbol": "stm32f100cbt6b.kicad_sym",+ "footprint": "stm32f100cbt6b.kicad_mod",+ "model_3d": "stm32f100cbt6b-etched.glb",+ "model_3d_plain": "stm32f100cbt6b.glb",+ "model_3d_step": "stm32f100cbt6b-etched.step",+ "model_3d_step_plain": "stm32f100cbt6b.step",+ "lbr": "stm32f100cbt6b.lbr"+ },+ "distributor_links": {+ "lcsc": "C8354"+ },+ "pins": [+ {+ "number": "1",+ "name": "VBAT",+ "type": "power_in",+ "description": "Backup domain power supply for RTC, backup registers, and 32 kHz oscillator; 1.8 to 3.6 V."+ },+ {+ "number": "2",+ "name": "PC13-TAMPER-RTC",+ "type": "bidirectional",+ "description": "I/O port C pin 13; 5V tolerant; output mode restricted to 2 MHz with 30 pF load maximum due to 3 mA current limit through power switch."+ },+ {+ "number": "3",+ "name": "PC14-OSC32_IN",+ "type": "bidirectional",+ "description": "I/O port C pin 14; 5V tolerant; output mode restricted to 2 MHz with 30 pF load maximum due to 3 mA current limit through power switch."+ },+ {+ "number": "4",+ "name": "PC15-OSC32_OUT",+ "type": "bidirectional",+ "description": "I/O port C pin 15; 5V tolerant; output mode restricted to 2 MHz with 30 pF load maximum due to 3 mA current limit through power switch."+ },+ {+ "number": "5",+ "name": "OSC_IN",+ "type": "input",+ "description": "External high-speed oscillator input for 4 to 24 MHz crystal or clock source; can be remapped to PD0."+ },+ {+ "number": "6",+ "name": "OSC_OUT",+ "type": "output",+ "description": "External high-speed oscillator output connected to crystal resonator; can be remapped to PD1."+ },+ {+ "number": "7",+ "name": "NRST",+ "type": "input",+ "description": "Active-low reset input with 30-50 kΩ internal pull-up resistor; input low level voltage maximum 0.8 V."+ },+ {+ "number": "8",+ "name": "VSSA",+ "type": "power_in",+ "description": "Analog ground for ADC, DAC, voltage regulator, and phase-locked loop circuits."+ },+ {+ "number": "9",+ "name": "VDDA",+ "type": "power_in",+ "description": "Analog power supply for ADC, DAC, and analog circuits; 2.4 to 3.6 V when ADC or DAC is used."+ },+ {+ "number": "10",+ "name": "PA0-WKUP",+ "type": "bidirectional",+ "description": "I/O port A pin 0 with wakeup capability; alternate functions include USART2_CTS, ADC1 channel 0, and timer input."+ },+ {+ "number": "11",+ "name": "PA1",+ "type": "bidirectional",+ "description": "I/O port A pin 1; alternate functions include USART2_RTS, ADC1 channel 1, and timer input."+ },+ {+ "number": "12",+ "name": "PA2",+ "type": "bidirectional",+ "description": "I/O port A pin 2; alternate functions include USART2_TX, ADC1 channel 2, and timer input/output."+ },+ {+ "number": "13",+ "name": "PA3",+ "type": "bidirectional",+ "description": "I/O port A pin 3; alternate functions include USART2_RX, ADC1 channel 3, and timer input/output."+ },+ {+ "number": "14",+ "name": "PA4",+ "type": "bidirectional",+ "description": "I/O port A pin 4; alternate functions include SPI1_NSS, USART2_CK, ADC1 channel 4, and DAC1 output."+ },+ {+ "number": "15",+ "name": "PA5",+ "type": "bidirectional",+ "description": "I/O port A pin 5; alternate functions include SPI1_SCK, ADC1 channel 5, and DAC2 output."+ },+ {+ "number": "16",+ "name": "PA6",+ "type": "bidirectional",+ "description": "I/O port A pin 6; 5V tolerant; alternate functions include SPI1_MISO, ADC1 channel 6, and timer input/output."+ },+ {+ "number": "17",+ "name": "PA7",+ "type": "bidirectional",+ "description": "I/O port A pin 7; 5V tolerant; alternate functions include SPI1_MOSI, ADC1 channel 7, and timer input/output."+ },+ {+ "number": "18",+ "name": "PB0",+ "type": "bidirectional",+ "description": "I/O port B pin 0; alternate functions include ADC1 channel 8 and timer input/output."+ },+ {+ "number": "19",+ "name": "PB1",+ "type": "bidirectional",+ "description": "I/O port B pin 1; alternate functions include ADC1 channel 9 and timer input/output."+ },+ {+ "number": "20",+ "name": "PB2",+ "type": "bidirectional",+ "description": "I/O port B pin 2; 5V tolerant; alternate function BOOT1 for boot mode selection."+ },+ {+ "number": "21",+ "name": "PB10",+ "type": "bidirectional",+ "description": "I/O port B pin 10; 5V tolerant; alternate functions include I2C2_SCL, USART3_TX, timer input/output, and HDMI-CEC."+ },+ {+ "number": "22",+ "name": "PB11",+ "type": "bidirectional",+ "description": "I/O port B pin 11; 5V tolerant; alternate functions include I2C2_SDA, USART3_RX, and timer input/output."+ },+ {+ "number": "23",+ "name": "VSS_1",+ "type": "power_in",+ "description": "Ground connection for digital circuits and I/O pins."+ },+ {+ "number": "24",+ "name": "VDD_1",+ "type": "power_in",+ "description": "Main power supply for digital circuits; 2.0 to 3.6 V."+ },+ {+ "number": "25",+ "name": "PB12",+ "type": "bidirectional",+ "description": "I/O port B pin 12; 5V tolerant; alternate functions include SPI2_NSS, I2C2_SMBA, timer input, and USART3_CK."+ },+ {+ "number": "26",+ "name": "PB13",+ "type": "bidirectional",+ "description": "I/O port B pin 13; 5V tolerant; alternate functions include SPI2_SCK, timer input, and USART3_CTS."+ },+ {+ "number": "27",+ "name": "PB14",+ "type": "bidirectional",+ "description": "I/O port B pin 14; 5V tolerant; alternate functions include SPI2_MISO, timer input/output, and USART3_RTS."+ },+ {+ "number": "28",+ "name": "PB15",+ "type": "bidirectional",+ "description": "I/O port B pin 15; 5V tolerant; alternate functions include SPI2_MOSI and timer input/output."+ },+ {+ "number": "29",+ "name": "PA8",+ "type": "bidirectional",+ "description": "I/O port A pin 8; 5V tolerant; alternate functions include USART1_CK, MCO clock output, and timer input/output."+ },+ {+ "number": "30",+ "name": "PA9",+ "type": "bidirectional",+ "description": "I/O port A pin 9; 5V tolerant; alternate functions include USART1_TX and timer input/output."+ },+ {+ "number": "31",+ "name": "PA10",+ "type": "bidirectional",+ "description": "I/O port A pin 10; 5V tolerant; alternate functions include USART1_RX and timer input/output."+ },+ {+ "number": "32",+ "name": "PA11",+ "type": "bidirectional",+ "description": "I/O port A pin 11; 5V tolerant; alternate functions include USART1_CTS and timer input/output."+ },+ {+ "number": "33",+ "name": "PA12",+ "type": "bidirectional",+ "description": "I/O port A pin 12; 5V tolerant; alternate functions include USART1_RTS and timer input."+ },+ {+ "number": "34",+ "name": "PA13",+ "type": "bidirectional",+ "description": "I/O port A pin 13; 5V tolerant; JTAG Test Mode Select/Serial Wire Debug I/O line shared with debugging interface."+ },+ {+ "number": "35",+ "name": "VSS_2",+ "type": "power_in",+ "description": "Ground connection for digital circuits and I/O pins."+ },+ {+ "number": "36",+ "name": "VDD_2",+ "type": "power_in",+ "description": "Main power supply for digital circuits; 2.0 to 3.6 V."+ },+ {+ "number": "37",+ "name": "PA14",+ "type": "bidirectional",+ "description": "I/O port A pin 14; 5V tolerant; JTAG Test Clock/Serial Wire Debug Clock line shared with debugging interface."+ },+ {+ "number": "38",+ "name": "PA15",+ "type": "bidirectional",+ "description": "I/O port A pin 15; 5V tolerant; alternate functions include JTAG Test Data In, timer input/output, and SPI1_NSS."+ },+ {+ "number": "39",+ "name": "PB3",+ "type": "bidirectional",+ "description": "I/O port B pin 3; 5V tolerant; alternate functions include JTAG Test Data Out, timer input/output, and SPI1_SCK."+ },+ {+ "number": "40",+ "name": "PB4",+ "type": "bidirectional",+ "description": "I/O port B pin 4; 5V tolerant; alternate functions include JTAG not Test Reset, timer input/output, and SPI1_MISO."+ },+ {+ "number": "41",+ "name": "PB5",+ "type": "bidirectional",+ "description": "I/O port B pin 5; alternate functions include I2C1_SMBA, timer input, and SPI1_MOSI."+ },+ {+ "number": "42",+ "name": "PB6",+ "type": "bidirectional",+ "description": "I/O port B pin 6; 5V tolerant; alternate functions include I2C1_SCL, timer input/output, and USART1_TX."+ },+ {+ "number": "43",+ "name": "PB7",+ "type": "bidirectional",+ "description": "I/O port B pin 7; 5V tolerant; alternate functions include I2C1_SDA, timer input/output, and USART1_RX."+ },+ {+ "number": "44",+ "name": "BOOT0",+ "type": "input",+ "description": "Boot mode selection pin sampled at reset to select boot from Flash memory, system memory, or embedded SRAM."+ },+ {+ "number": "45",+ "name": "PB8",+ "type": "bidirectional",+ "description": "I/O port B pin 8; 5V tolerant; alternate functions include timer input/output, I2C1_SCL, and HDMI-CEC."+ },+ {+ "number": "46",+ "name": "PB9",+ "type": "bidirectional",+ "description": "I/O port B pin 9; 5V tolerant; alternate functions include timer input/output and I2C1_SDA."+ },+ {+ "number": "47",+ "name": "VSS_3",+ "type": "power_in",+ "description": "Ground connection for digital circuits and I/O pins."+ },+ {+ "number": "48",+ "name": "VDD_3",+ "type": "power_in",+ "description": "Main power supply for digital circuits; 2.0 to 3.6 V."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [],+ "pages_sent": 88,+ "cost_usd": 0.9387,+ "at": "2026-09-23T06:00:18"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586158842015465472",+ "pages": 88,+ "sha256": "c810aafb848820fa",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 48,+ "described": 48,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}