component
STM32F072C8U6
Public Made by Adomby adom
STMicroelectronics Microcontrollers (MCU/MPU/SOC), UFQFPN-48(7x7). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+85@@ -0,0 +1,85 @@+# STM32F072C8U6++**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · UFQFPN-48(7x7)++STM32F072C8U6 from STMicroelectronics, in a UFQFPN-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VBAT | power_in | Backup power supply for RTC and backup registers, 1.65 to 3.6 V |+| 2 | PC13 | bidirectional | General-purpose I/O with RTC alarm and periodic wakeup; alternate functions WKUP2, RTC_TAMP1, RTC_TS, RTC_OUT |+| 3 | PC14-OSC32_IN | bidirectional | 32 kHz oscillator input; alternate function OSC32_IN |+| 4 | PC15-OSC32_OUT | bidirectional | 32 kHz oscillator output; alternate function OSC32_OUT |+| 5 | PF0-OSC_IN | bidirectional | High-speed oscillator input pin; alternate functions CRS_SYNC, OSC_IN |+| 6 | PF1-OSC_OUT | bidirectional | High-speed oscillator output pin; alternate function OSC_OUT |+| 7 | NRST | bidirectional | Device reset input / internal reset output with embedded weak pull-up resistor, active low |+| 8 | VSSA | power_in | Analog ground for ADC, DAC, comparators and analog circuits |+| 9 | VDDA | power_in | Analog power supply for ADC, DAC, comparators, oscillators and PLL; minimum 2.4 V when ADC or DAC used |+| 10 | PA0 | bidirectional | GPIO PA0 with ADC_IN0; alternate functions USART2_CTS, TIM2_CH1_ETR, COMP1_OUT, TSC_G1_IO1, USART4_TX; additional functions COMP1_INM6, RTC_TAMP2, WKUP1 |+| 11 | PA1 | bidirectional | GPIO PA1 with ADC_IN1; alternate functions USART2_RTS, TIM2_CH2, TIM15_CH1N, TSC_G1_IO2, USART4_RX, EVENTOUT; additional function COMP1_INP |+| 12 | PA2 | bidirectional | GPIO PA2 with ADC_IN2; alternate functions USART2_TX, COMP2_OUT, TIM2_CH3, TIM15_CH1, TSC_G1_IO3; additional functions COMP2_INM6, WKUP4 |+| 13 | PA3 | bidirectional | GPIO PA3 with ADC_IN3; alternate functions USART2_RX, TIM2_CH4, TIM15_CH2, TSC_G1_IO4; additional function COMP2_INP |+| 14 | PA4 | bidirectional | GPIO PA4 with ADC_IN4, DAC_OUT1; alternate functions SPI1_NSS, I2S1_WS, TIM14_CH1, TSC_G2_IO1, USART2_CK; additional functions COMP1_INM4, COMP2_INM4 |+| 15 | PA5 | bidirectional | GPIO PA5 with ADC_IN5, DAC_OUT2; alternate functions SPI1_SCK, I2S1_CK, CEC, TIM2_CH1_ETR, TSC_G2_IO2; additional functions COMP1_INM5, COMP2_INM5 |+| 16 | PA6 | bidirectional | GPIO PA6 with ADC_IN6; alternate functions SPI1_MISO, I2S1_MCK, TIM3_CH1, TIM1_BKIN, TIM16_CH1, COMP1_OUT, TSC_G2_IO3, EVENTOUT, USART3_CTS |+| 17 | PA7 | bidirectional | GPIO PA7 with ADC_IN7; alternate functions SPI1_MOSI, I2S1_SD, TIM3_CH2, TIM14_CH1, TIM1_CH1N, TIM17_CH1, COMP2_OUT, TSC_G2_IO4, EVENTOUT |+| 18 | PB0 | bidirectional | GPIO PB0 with ADC_IN8; alternate functions TIM3_CH3, TIM1_CH2N, TSC_G3_IO2, EVENTOUT, USART3_CK |+| 19 | PB1 | bidirectional | GPIO PB1 with ADC_IN9; alternate functions TIM3_CH4, USART3_RTS, TIM14_CH1, TIM1_CH3N, TSC_G3_IO3 |+| 20 | PB2 | bidirectional | GPIO PB2 with 5V tolerance; alternate function TSC_G3_IO4 |+| 21 | PB10 | bidirectional | GPIO PB10 with 5V tolerance; alternate functions SPI2_SCK, I2C2_SCL, USART3_TX, CEC, TSC_SYNC, TIM2_CH3 |+| 22 | PB11 | bidirectional | GPIO PB11 with 5V tolerance; alternate functions USART3_RX, TIM2_CH4, EVENTOUT, TSC_G6_IO1, I2C2_SDA |+| 23 | VSS | power_in | Ground connection for digital circuits |+| 24 | VDD | power_in | Digital power supply, 2.0 to 3.6 V for I/Os and internal regulator |+| 25 | PB12 | bidirectional | GPIO PB12 with 5V tolerance; alternate functions TIM1_BKIN, TIM15_BKIN, SPI2_NSS, I2S2_WS, USART3_CK, TSC_G6_IO2, EVENTOUT |+| 26 | PB13 | bidirectional | GPIO PB13 with 5V tolerance and FM+ capability; alternate functions SPI2_SCK, I2S2_CK, I2C2_SCL, USART3_CTS, TIM1_CH1N, TSC_G6_IO3 |+| 27 | PB14 | bidirectional | GPIO PB14 with 5V tolerance and FM+ capability; alternate functions SPI2_MISO, I2S2_MCK, I2C2_SDA, USART3_RTS, TIM1_CH2N, TIM15_CH1, TSC_G6_IO4 |+| 28 | PB15 | bidirectional | GPIO PB15 with 5V tolerance; alternate functions SPI2_MOSI, I2S2_SD, TIM1_CH3N, TIM15_CH1N, TIM15_CH2; additional functions WKUP7, RTC_REFIN |+| 29 | PA8 | bidirectional | GPIO PA8 supplied from VDDIO2 with 5V tolerance; alternate functions USART1_CK, TIM1_CH1, EVENTOUT, MCO, CRS_SYNC |+| 30 | PA9 | bidirectional | GPIO PA9 supplied from VDDIO2 with 5V tolerance; alternate functions USART1_TX, TIM1_CH2, TIM15_BKIN, TSC_G4_IO1 |+| 31 | PA10 | bidirectional | GPIO PA10 supplied from VDDIO2 with 5V tolerance; alternate functions USART1_RX, TIM1_CH3, TIM17_BKIN, TSC_G4_IO2 |+| 32 | PA11 | bidirectional | GPIO PA11 supplied from VDDIO2 with 5V tolerance and USB_DM pin; alternate functions CAN_RX, USART1_CTS, TIM1_CH4, COMP1_OUT, TSC_G4_IO3, EVENTOUT; additional function USB_DM |+| 33 | PA12 | bidirectional | GPIO PA12 supplied from VDDIO2 with 5V tolerance and USB_DP pin; alternate functions CAN_TX, USART1_RTS, TIM1_ETR, COMP2_OUT, TSC_G4_IO4, EVENTOUT; additional function USB_DP |+| 34 | PA13 | bidirectional | GPIO PA13 supplied from VDDIO2 with 5V tolerance; after reset configured as SWDIO with internal pull-up; alternate functions IR_OUT, SWDIO, USB_NOE |+| 35 | VSS | power_in | Ground connection for digital circuits |+| 36 | VDDIO2 | power_in | Independent digital power supply for selected I/Os, 1.65 to 3.6 V; monitored against internal reference voltage |+| 37 | PA14 | bidirectional | GPIO PA14 supplied from VDDIO2 with 5V tolerance; after reset configured as SWCLK with internal pull-down; alternate function USART2_TX, SWCLK |+| 38 | PA15 | bidirectional | GPIO PA15 supplied from VDDIO2 with 5V tolerance; alternate functions SPI1_NSS, I2S1_WS, USART2_RX, USART4_RTS, TIM2_CH1_ETR, EVENTOUT |+| 39 | PB3 | bidirectional | GPIO PB3 with 5V tolerance; alternate functions SPI1_SCK, I2S1_CK, TIM2_CH2, TSC_G5_IO1, EVENTOUT |+| 40 | PB4 | bidirectional | GPIO PB4 with 5V tolerance; alternate functions SPI1_MISO, I2S1_MCK, TIM17_BKIN, TIM3_CH1, TSC_G5_IO2, EVENTOUT |+| 41 | PB5 | bidirectional | GPIO PB5 with 5V tolerance; alternate functions SPI1_MOSI, I2S1_SD, I2C1_SMBA, TIM16_BKIN, TIM3_CH2; additional function WKUP6 |+| 42 | PB6 | bidirectional | GPIO PB6 with 5V tolerance and FM+ capability; alternate functions I2C1_SCL, USART1_TX, TIM16_CH1N, TSC_G5_IO3 |+| 43 | PB7 | bidirectional | GPIO PB7 with 5V tolerance and FM+ capability; alternate functions I2C1_SDA, USART1_RX, USART4_CTS, TIM17_CH1N, TSC_G5_IO4 |+| 44 | BOOT0 | input | Boot memory selection pin; determines boot from User Flash, System Memory, or embedded SRAM |+| 45 | PB8 | bidirectional | GPIO PB8 with 5V tolerance and FM+ capability; alternate functions I2C1_SCL, CEC, TIM16_CH1, TSC_SYNC, CAN_RX |+| 46 | PB9 | bidirectional | GPIO PB9 with 5V tolerance and FM+ capability; alternate functions SPI2_NSS, I2S2_WS, I2C1_SDA, IR_OUT, TIM17_CH1, EVENTOUT, CAN_TX |+| 47 | VSS | power_in | Ground connection for digital circuits |+| 48 | VDD | power_in | Digital power supply, 2.0 to 3.6 V for I/Os and internal regulator |+| 49 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | UFQFPN-48(7x7) |+| Category | Embedded Processors & Controllers |+| Pins | 49 |++## CAD (KiCad official)++- Symbol: `STM32F072C8U6`+- Footprint: `Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm`+- 3D model: UFQFPN-48(7x7) (KiCad packages3D, STEP)+- 3D model files: `stm32f072c8u6-etched.step` / `stm32f072c8u6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32f072c8u6.step` / `stm32f072c8u6.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588893156209537024) (128 pp, sha256 `b01391f094699aeb`, retrieved 2026-10-06, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm32f072c8u6-datasheet.pdf)
page.jsonadded+406@@ -0,0 +1,406 @@+{+ "slug": "stm32f072c8u6",+ "version": "0.1.0",+ "type": "component",+ "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), UFQFPN-48(7x7). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "embedded processors & controllers",+ "stm32f072c8u6",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "stm32f072c8u6.kicad_sym",+ "stm32f072c8u6.kicad_mod",+ "stm32f072c8u6.glb",+ "stm32f072c8u6.step",+ "stm32f072c8u6.lbr",+ "docs/hero.png",+ "docs/stm32f072c8u6-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "stm32f072c8u6-hero.glb",+ "stm32f072c8u6-hero.overlay.json"+ ],+ "component": {+ "mpn": "STM32F072C8U6",+ "manufacturer": "STMicroelectronics",+ "package": "UFQFPN-48(7x7)",+ "pin_count": 49,+ "category": "Embedded Processors & Controllers",+ "subcategory": "Microcontrollers (MCU/MPU/SOC)",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588893156209537024",+ "parts": {+ "symbol": "stm32f072c8u6.kicad_sym",+ "footprint": "stm32f072c8u6.kicad_mod",+ "model_3d": "stm32f072c8u6-hero.glb",+ "model_3d_plain": "stm32f072c8u6.glb",+ "model_3d_step": "stm32f072c8u6-etched.step",+ "model_3d_step_plain": "stm32f072c8u6.step",+ "lbr": "stm32f072c8u6.lbr"+ },+ "distributor_links": {+ "lcsc": 784818,+ "digikey": "497-17360-ND",+ "mouser": "511-STM32F072C8U6"+ },+ "distributor_check": {+ "checked_at": "2026-10-06T01:43:14Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "497-17360-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "511-STM32F072C8U6",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "VBAT",+ "type": "power_in",+ "description": "Backup power supply for RTC and backup registers, 1.65 to 3.6 V"+ },+ {+ "number": "2",+ "name": "PC13",+ "type": "bidirectional",+ "description": "General-purpose I/O with RTC alarm and periodic wakeup; alternate functions WKUP2, RTC_TAMP1, RTC_TS, RTC_OUT"+ },+ {+ "number": "3",+ "name": "PC14-OSC32_IN",+ "type": "bidirectional",+ "description": "32 kHz oscillator input; alternate function OSC32_IN"+ },+ {+ "number": "4",+ "name": "PC15-OSC32_OUT",+ "type": "bidirectional",+ "description": "32 kHz oscillator output; alternate function OSC32_OUT"+ },+ {+ "number": "5",+ "name": "PF0-OSC_IN",+ "type": "bidirectional",+ "description": "High-speed oscillator input pin; alternate functions CRS_SYNC, OSC_IN"+ },+ {+ "number": "6",+ "name": "PF1-OSC_OUT",+ "type": "bidirectional",+ "description": "High-speed oscillator output pin; alternate function OSC_OUT"+ },+ {+ "number": "7",+ "name": "NRST",+ "type": "bidirectional",+ "description": "Device reset input / internal reset output with embedded weak pull-up resistor, active low"+ },+ {+ "number": "8",+ "name": "VSSA",+ "type": "power_in",+ "description": "Analog ground for ADC, DAC, comparators and analog circuits"+ },+ {+ "number": "9",+ "name": "VDDA",+ "type": "power_in",+ "description": "Analog power supply for ADC, DAC, comparators, oscillators and PLL; minimum 2.4 V when ADC or DAC used"+ },+ {+ "number": "10",+ "name": "PA0",+ "type": "bidirectional",+ "description": "GPIO PA0 with ADC_IN0; alternate functions USART2_CTS, TIM2_CH1_ETR, COMP1_OUT, TSC_G1_IO1, USART4_TX; additional functions COMP1_INM6, RTC_TAMP2, WKUP1"+ },+ {+ "number": "11",+ "name": "PA1",+ "type": "bidirectional",+ "description": "GPIO PA1 with ADC_IN1; alternate functions USART2_RTS, TIM2_CH2, TIM15_CH1N, TSC_G1_IO2, USART4_RX, EVENTOUT; additional function COMP1_INP"+ },+ {+ "number": "12",+ "name": "PA2",+ "type": "bidirectional",+ "description": "GPIO PA2 with ADC_IN2; alternate functions USART2_TX, COMP2_OUT, TIM2_CH3, TIM15_CH1, TSC_G1_IO3; additional functions COMP2_INM6, WKUP4"+ },+ {+ "number": "13",+ "name": "PA3",+ "type": "bidirectional",+ "description": "GPIO PA3 with ADC_IN3; alternate functions USART2_RX, TIM2_CH4, TIM15_CH2, TSC_G1_IO4; additional function COMP2_INP"+ },+ {+ "number": "14",+ "name": "PA4",+ "type": "bidirectional",+ "description": "GPIO PA4 with ADC_IN4, DAC_OUT1; alternate functions SPI1_NSS, I2S1_WS, TIM14_CH1, TSC_G2_IO1, USART2_CK; additional functions COMP1_INM4, COMP2_INM4"+ },+ {+ "number": "15",+ "name": "PA5",+ "type": "bidirectional",+ "description": "GPIO PA5 with ADC_IN5, DAC_OUT2; alternate functions SPI1_SCK, I2S1_CK, CEC, TIM2_CH1_ETR, TSC_G2_IO2; additional functions COMP1_INM5, COMP2_INM5"+ },+ {+ "number": "16",+ "name": "PA6",+ "type": "bidirectional",+ "description": "GPIO PA6 with ADC_IN6; alternate functions SPI1_MISO, I2S1_MCK, TIM3_CH1, TIM1_BKIN, TIM16_CH1, COMP1_OUT, TSC_G2_IO3, EVENTOUT, USART3_CTS"+ },+ {+ "number": "17",+ "name": "PA7",+ "type": "bidirectional",+ "description": "GPIO PA7 with ADC_IN7; alternate functions SPI1_MOSI, I2S1_SD, TIM3_CH2, TIM14_CH1, TIM1_CH1N, TIM17_CH1, COMP2_OUT, TSC_G2_IO4, EVENTOUT"+ },+ {+ "number": "18",+ "name": "PB0",+ "type": "bidirectional",+ "description": "GPIO PB0 with ADC_IN8; alternate functions TIM3_CH3, TIM1_CH2N, TSC_G3_IO2, EVENTOUT, USART3_CK"+ },+ {+ "number": "19",+ "name": "PB1",+ "type": "bidirectional",+ "description": "GPIO PB1 with ADC_IN9; alternate functions TIM3_CH4, USART3_RTS, TIM14_CH1, TIM1_CH3N, TSC_G3_IO3"+ },+ {+ "number": "20",+ "name": "PB2",+ "type": "bidirectional",+ "description": "GPIO PB2 with 5V tolerance; alternate function TSC_G3_IO4"+ },+ {+ "number": "21",+ "name": "PB10",+ "type": "bidirectional",+ "description": "GPIO PB10 with 5V tolerance; alternate functions SPI2_SCK, I2C2_SCL, USART3_TX, CEC, TSC_SYNC, TIM2_CH3"+ },+ {+ "number": "22",+ "name": "PB11",+ "type": "bidirectional",+ "description": "GPIO PB11 with 5V tolerance; alternate functions USART3_RX, TIM2_CH4, EVENTOUT, TSC_G6_IO1, I2C2_SDA"+ },+ {+ "number": "23",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground connection for digital circuits"+ },+ {+ "number": "24",+ "name": "VDD",+ "type": "power_in",+ "description": "Digital power supply, 2.0 to 3.6 V for I/Os and internal regulator"+ },+ {+ "number": "25",+ "name": "PB12",+ "type": "bidirectional",+ "description": "GPIO PB12 with 5V tolerance; alternate functions TIM1_BKIN, TIM15_BKIN, SPI2_NSS, I2S2_WS, USART3_CK, TSC_G6_IO2, EVENTOUT"+ },+ {+ "number": "26",+ "name": "PB13",+ "type": "bidirectional",+ "description": "GPIO PB13 with 5V tolerance and FM+ capability; alternate functions SPI2_SCK, I2S2_CK, I2C2_SCL, USART3_CTS, TIM1_CH1N, TSC_G6_IO3"+ },+ {+ "number": "27",+ "name": "PB14",+ "type": "bidirectional",+ "description": "GPIO PB14 with 5V tolerance and FM+ capability; alternate functions SPI2_MISO, I2S2_MCK, I2C2_SDA, USART3_RTS, TIM1_CH2N, TIM15_CH1, TSC_G6_IO4"+ },+ {+ "number": "28",+ "name": "PB15",+ "type": "bidirectional",+ "description": "GPIO PB15 with 5V tolerance; alternate functions SPI2_MOSI, I2S2_SD, TIM1_CH3N, TIM15_CH1N, TIM15_CH2; additional functions WKUP7, RTC_REFIN"+ },+ {+ "number": "29",+ "name": "PA8",+ "type": "bidirectional",+ "description": "GPIO PA8 supplied from VDDIO2 with 5V tolerance; alternate functions USART1_CK, TIM1_CH1, EVENTOUT, MCO, CRS_SYNC"+ },+ {+ "number": "30",+ "name": "PA9",+ "type": "bidirectional",+ "description": "GPIO PA9 supplied from VDDIO2 with 5V tolerance; alternate functions USART1_TX, TIM1_CH2, TIM15_BKIN, TSC_G4_IO1"+ },+ {+ "number": "31",+ "name": "PA10",+ "type": "bidirectional",+ "description": "GPIO PA10 supplied from VDDIO2 with 5V tolerance; alternate functions USART1_RX, TIM1_CH3, TIM17_BKIN, TSC_G4_IO2"+ },+ {+ "number": "32",+ "name": "PA11",+ "type": "bidirectional",+ "description": "GPIO PA11 supplied from VDDIO2 with 5V tolerance and USB_DM pin; alternate functions CAN_RX, USART1_CTS, TIM1_CH4, COMP1_OUT, TSC_G4_IO3, EVENTOUT; additional function USB_DM"+ },+ {+ "number": "33",+ "name": "PA12",+ "type": "bidirectional",+ "description": "GPIO PA12 supplied from VDDIO2 with 5V tolerance and USB_DP pin; alternate functions CAN_TX, USART1_RTS, TIM1_ETR, COMP2_OUT, TSC_G4_IO4, EVENTOUT; additional function USB_DP"+ },+ {+ "number": "34",+ "name": "PA13",+ "type": "bidirectional",+ "description": "GPIO PA13 supplied from VDDIO2 with 5V tolerance; after reset configured as SWDIO with internal pull-up; alternate functions IR_OUT, SWDIO, USB_NOE"+ },+ {+ "number": "35",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground connection for digital circuits"+ },+ {+ "number": "36",+ "name": "VDDIO2",+ "type": "power_in",+ "description": "Independent digital power supply for selected I/Os, 1.65 to 3.6 V; monitored against internal reference voltage"+ },+ {+ "number": "37",+ "name": "PA14",+ "type": "bidirectional",+ "description": "GPIO PA14 supplied from VDDIO2 with 5V tolerance; after reset configured as SWCLK with internal pull-down; alternate function USART2_TX, SWCLK"+ },+ {+ "number": "38",+ "name": "PA15",+ "type": "bidirectional",+ "description": "GPIO PA15 supplied from VDDIO2 with 5V tolerance; alternate functions SPI1_NSS, I2S1_WS, USART2_RX, USART4_RTS, TIM2_CH1_ETR, EVENTOUT"+ },+ {+ "number": "39",+ "name": "PB3",+ "type": "bidirectional",+ "description": "GPIO PB3 with 5V tolerance; alternate functions SPI1_SCK, I2S1_CK, TIM2_CH2, TSC_G5_IO1, EVENTOUT"+ },+ {+ "number": "40",+ "name": "PB4",+ "type": "bidirectional",+ "description": "GPIO PB4 with 5V tolerance; alternate functions SPI1_MISO, I2S1_MCK, TIM17_BKIN, TIM3_CH1, TSC_G5_IO2, EVENTOUT"+ },+ {+ "number": "41",+ "name": "PB5",+ "type": "bidirectional",+ "description": "GPIO PB5 with 5V tolerance; alternate functions SPI1_MOSI, I2S1_SD, I2C1_SMBA, TIM16_BKIN, TIM3_CH2; additional function WKUP6"+ },+ {+ "number": "42",+ "name": "PB6",+ "type": "bidirectional",+ "description": "GPIO PB6 with 5V tolerance and FM+ capability; alternate functions I2C1_SCL, USART1_TX, TIM16_CH1N, TSC_G5_IO3"+ },+ {+ "number": "43",+ "name": "PB7",+ "type": "bidirectional",+ "description": "GPIO PB7 with 5V tolerance and FM+ capability; alternate functions I2C1_SDA, USART1_RX, USART4_CTS, TIM17_CH1N, TSC_G5_IO4"+ },+ {+ "number": "44",+ "name": "BOOT0",+ "type": "input",+ "description": "Boot memory selection pin; determines boot from User Flash, System Memory, or embedded SRAM"+ },+ {+ "number": "45",+ "name": "PB8",+ "type": "bidirectional",+ "description": "GPIO PB8 with 5V tolerance and FM+ capability; alternate functions I2C1_SCL, CEC, TIM16_CH1, TSC_SYNC, CAN_RX"+ },+ {+ "number": "46",+ "name": "PB9",+ "type": "bidirectional",+ "description": "GPIO PB9 with 5V tolerance and FM+ capability; alternate functions SPI2_NSS, I2S2_WS, I2C1_SDA, IR_OUT, TIM17_CH1, EVENTOUT, CAN_TX"+ },+ {+ "number": "47",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground connection for digital circuits"+ },+ {+ "number": "48",+ "name": "VDD",+ "type": "power_in",+ "description": "Digital power supply, 2.0 to 3.6 V for I/Os and internal regulator"+ },+ {+ "number": "49",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: PC13, PC14, PC15 are power-switched GPIO pins with limited current capability (3 mA max) per note 1 ; Pins 29-34 and 37-38 (PA8-PA15) are supplied from VDDIO2 rail per note 3 on page 42; independent pow",+ "exposed pad 49 added from the footprint"+ ],+ "pages_sent": 65,+ "cost_usd": 0.4687,+ "at": "2026-10-06T01:42:56"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588893156209537024",+ "pages": 128,+ "sha256": "b01391f094699aeb",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 49,+ "described": 49,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}