← Commit history

Initial commit: component/stm32f070f6p6

Ray ·909e9feced ·
2 files changed +271
README.mdadded+56
@@ -0,0 +1,56 @@+# STM32F070F6P6++**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · TSSOP-20++STM32F070F6P6 from STMicroelectronics, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | BOOT0 | input | Boot memory selection pin; selects between User Flash, System Memory, or embedded SRAM boot modes. |+| 2 | PF0-OSC_IN | input | HSE oscillator input pin; receives external crystal or oscillator signal in the range 4-32 MHz. |+| 3 | PF1-OSC_OUT | output | HSE oscillator output pin; drives the load capacitance of external crystal resonator. |+| 4 | NRST | input | Device reset input with internal pull-up resistor; active low reset signal with integrated POR/PDR. |+| 5 | VDDA | power_in | Analog power supply pin; operating voltage range 2.4-3.6V; must be connected to same supply as VDD or higher. |+| 6 | PA0 | bidirectional | GPIO port A pin 0; alternate functions include USART2_CTS, USART4_TX, RTC_TAMP2, WKUP1, ADC_IN0. |+| 7 | PA1 | bidirectional | GPIO port A pin 1; alternate functions include USART2_RTS, TIM15_CH1N, USART4_RX, EVENTOUT, ADC_IN1. |+| 8 | PA2 | bidirectional | GPIO port A pin 2; alternate functions include USART2_TX, TIM15_CH1, ADC_IN2, WKUP4. |+| 9 | PA3 | bidirectional | GPIO port A pin 3; alternate functions include USART2_RX, TIM15_CH2, ADC_IN3. |+| 10 | PA4 | bidirectional | GPIO port A pin 4; alternate functions include SPI1_NSS, TIM14_CH1, USART2_CK, USB_NOE, ADC_IN4. |+| 11 | PA5 | bidirectional | GPIO port A pin 5; alternate functions include SPI1_SCK, ADC_IN5. |+| 12 | PA6 | bidirectional | GPIO port A pin 6; alternate functions include SPI1_MISO, TIM3_CH1, TIM1_BKIN, TIM16_CH1, EVENTOUT, USART3_CTS, ADC_IN6. |+| 13 | PA7 | bidirectional | GPIO port A pin 7; alternate functions include SPI1_MOSI, TIM3_CH2, TIM14_CH1, TIM1_CH1N, TIM17_CH1, EVENTOUT, ADC_IN7. |+| 14 | PB1 | bidirectional | GPIO port B pin 1; alternate functions include TIM3_CH4, USART3_RTS, TIM14_CH1, TIM1_CH3N, ADC_IN9. |+| 15 | VSS | power_in | Ground reference pin; return path for digital circuitry and I/O logic. |+| 16 | VDD | power_in | Digital power supply pin; operating voltage range 2.4-3.6V; main supply for CPU, memory, and I/O. |+| 17 | PA9 | bidirectional | GPIO port A pin 9, 5V tolerant; alternate functions include USART1_TX, TIM1_CH2, TIM15_BKIN, I2C1_SCL. |+| 18 | PA10 | bidirectional | GPIO port A pin 10, 5V tolerant; alternate functions include USART1_RX, TIM1_CH3, TIM17_BKIN, I2C1_SDA. |+| 19 | PA13 | bidirectional | GPIO port A pin 13, 5V tolerant; alternate functions include IR_OUT, SWDIO, USB_NOE; SWDIO after reset. |+| 20 | PA14 | bidirectional | GPIO port A pin 14, 5V tolerant; alternate functions include USART2_TX, SWCLK; SWCLK (serial wire debug clock) after reset. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | TSSOP-20 |+| Category | Embedded Processors & Controllers |+| Pins | 20 |++## CAD (KiCad official)++- Symbol: `STM32F070F6P6`+- Footprint: `Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm`+- 3D model: TSSOP-20 (KiCad packages3D, STEP)+- 3D model files: `stm32f070f6p6-etched.step` / `stm32f070f6p6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32f070f6p6.step` / `stm32f070f6p6.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588882471135940608) (88 pp, sha256 `f9f353433528873a`, retrieved 2026-09-23, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm32f070f6p6-datasheet.pdf)
page.jsonadded+215
@@ -0,0 +1,215 @@+{+  "slug": "stm32f070f6p6",+  "version": "0.1.0",+  "type": "component",+  "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), TSSOP-20. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "embedded processors & controllers",+    "stm32f070f6p6",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "stm32f070f6p6.kicad_sym",+    "stm32f070f6p6.kicad_mod",+    "stm32f070f6p6.glb",+    "stm32f070f6p6.step",+    "stm32f070f6p6.lbr",+    "docs/hero.png",+    "docs/stm32f070f6p6-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "STM32F070F6P6",+    "manufacturer": "STMicroelectronics",+    "package": "TSSOP-20",+    "pin_count": 20,+    "category": "Embedded Processors & Controllers",+    "subcategory": "Microcontrollers (MCU/MPU/SOC)",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588882471135940608",+    "parts": {+      "symbol": "stm32f070f6p6.kicad_sym",+      "footprint": "stm32f070f6p6.kicad_mod",+      "model_3d": "stm32f070f6p6-etched.glb",+      "model_3d_plain": "stm32f070f6p6.glb",+      "model_3d_step": "stm32f070f6p6-etched.step",+      "model_3d_step_plain": "stm32f070f6p6.step",+      "lbr": "stm32f070f6p6.lbr"+    },+    "distributor_links": {+      "lcsc": "C86951"+    },+    "pins": [+      {+        "number": "1",+        "name": "BOOT0",+        "type": "input",+        "description": "Boot memory selection pin; selects between User Flash, System Memory, or embedded SRAM boot modes."+      },+      {+        "number": "2",+        "name": "PF0-OSC_IN",+        "type": "input",+        "description": "HSE oscillator input pin; receives external crystal or oscillator signal in the range 4-32 MHz."+      },+      {+        "number": "3",+        "name": "PF1-OSC_OUT",+        "type": "output",+        "description": "HSE oscillator output pin; drives the load capacitance of external crystal resonator."+      },+      {+        "number": "4",+        "name": "NRST",+        "type": "input",+        "description": "Device reset input with internal pull-up resistor; active low reset signal with integrated POR/PDR."+      },+      {+        "number": "5",+        "name": "VDDA",+        "type": "power_in",+        "description": "Analog power supply pin; operating voltage range 2.4-3.6V; must be connected to same supply as VDD or higher."+      },+      {+        "number": "6",+        "name": "PA0",+        "type": "bidirectional",+        "description": "GPIO port A pin 0; alternate functions include USART2_CTS, USART4_TX, RTC_TAMP2, WKUP1, ADC_IN0."+      },+      {+        "number": "7",+        "name": "PA1",+        "type": "bidirectional",+        "description": "GPIO port A pin 1; alternate functions include USART2_RTS, TIM15_CH1N, USART4_RX, EVENTOUT, ADC_IN1."+      },+      {+        "number": "8",+        "name": "PA2",+        "type": "bidirectional",+        "description": "GPIO port A pin 2; alternate functions include USART2_TX, TIM15_CH1, ADC_IN2, WKUP4."+      },+      {+        "number": "9",+        "name": "PA3",+        "type": "bidirectional",+        "description": "GPIO port A pin 3; alternate functions include USART2_RX, TIM15_CH2, ADC_IN3."+      },+      {+        "number": "10",+        "name": "PA4",+        "type": "bidirectional",+        "description": "GPIO port A pin 4; alternate functions include SPI1_NSS, TIM14_CH1, USART2_CK, USB_NOE, ADC_IN4."+      },+      {+        "number": "11",+        "name": "PA5",+        "type": "bidirectional",+        "description": "GPIO port A pin 5; alternate functions include SPI1_SCK, ADC_IN5."+      },+      {+        "number": "12",+        "name": "PA6",+        "type": "bidirectional",+        "description": "GPIO port A pin 6; alternate functions include SPI1_MISO, TIM3_CH1, TIM1_BKIN, TIM16_CH1, EVENTOUT, USART3_CTS, ADC_IN6."+      },+      {+        "number": "13",+        "name": "PA7",+        "type": "bidirectional",+        "description": "GPIO port A pin 7; alternate functions include SPI1_MOSI, TIM3_CH2, TIM14_CH1, TIM1_CH1N, TIM17_CH1, EVENTOUT, ADC_IN7."+      },+      {+        "number": "14",+        "name": "PB1",+        "type": "bidirectional",+        "description": "GPIO port B pin 1; alternate functions include TIM3_CH4, USART3_RTS, TIM14_CH1, TIM1_CH3N, ADC_IN9."+      },+      {+        "number": "15",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground reference pin; return path for digital circuitry and I/O logic."+      },+      {+        "number": "16",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital power supply pin; operating voltage range 2.4-3.6V; main supply for CPU, memory, and I/O."+      },+      {+        "number": "17",+        "name": "PA9",+        "type": "bidirectional",+        "description": "GPIO port A pin 9, 5V tolerant; alternate functions include USART1_TX, TIM1_CH2, TIM15_BKIN, I2C1_SCL."+      },+      {+        "number": "18",+        "name": "PA10",+        "type": "bidirectional",+        "description": "GPIO port A pin 10, 5V tolerant; alternate functions include USART1_RX, TIM1_CH3, TIM17_BKIN, I2C1_SDA."+      },+      {+        "number": "19",+        "name": "PA13",+        "type": "bidirectional",+        "description": "GPIO port A pin 13, 5V tolerant; alternate functions include IR_OUT, SWDIO, USB_NOE; SWDIO after reset."+      },+      {+        "number": "20",+        "name": "PA14",+        "type": "bidirectional",+        "description": "GPIO port A pin 14, 5V tolerant; alternate functions include USART2_TX, SWCLK; SWCLK (serial wire debug clock) after reset."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: Table 11 column alignment uncertain: PA4 TSSOP20 pin position inferred from PA sequence (should be p; Figure 5 pinout diagram shows labels that do not all appear in Table 11 TSSOP20 column (e.g., PB6, P"+        ],+        "pages_sent": 88,+        "cost_usd": 0.9927,+        "at": "2026-09-23T13:30:58"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588882471135940608",+        "pages": 88,+        "sha256": "f9f353433528873a",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 20,+        "described": 20,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file