component
STM32F070C6T6TR
Public Made by Adomby adom
STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-48(7x7). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+84@@ -0,0 +1,84 @@+# STM32F070C6T6TR++**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · LQFP-48(7x7)++STM32F070C6T6TR from STMicroelectronics, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VDD | power_in | Digital power supply for I/Os and digital circuitry, VDD = 2.4 V to 3.6 V. |+| 2 | PC13 | bidirectional | Standard 3.3 V I/O (TC) powered through the power switch, which sinks at most 3 mA, so output use is limited to 2 MHz with 30 pF and it must not drive LEDs; additional functions WKUP2, RTC_TAMP1, RTC_TS, RTC_OUT. |+| 3 | PC14-OSC32_IN | bidirectional | Standard 3.3 V I/O (TC) powered through the power switch with the same 3 mA limit and output limits (2 MHz, 30 pF, no current sourcing); additional function OSC32_IN for the 32 kHz oscillator. |+| 4 | PC15-OSC32_OUT | bidirectional | Standard 3.3 V I/O (TC) powered through the power switch with the same 3 mA limit and output limits (2 MHz, 30 pF, no current sourcing); additional function OSC32_OUT for the 32 kHz oscillator. |+| 5 | PF0-OSC_IN | bidirectional | 5 V tolerant (FT) I/O; alternate function I2C1_SDA is available on STM32F070x6 devices only, and it serves as OSC_IN for the 4 to 32 MHz crystal oscillator. |+| 6 | PF1-OSC_OUT | bidirectional | 5 V tolerant (FT) I/O; alternate function I2C1_SCL is available on STM32F070x6 devices only, and it serves as OSC_OUT for the 4 to 32 MHz crystal oscillator. |+| 7 | NRST | bidirectional | Bidirectional reset pin with embedded weak pull-up, acting as active-low device reset input and internal reset output. |+| 8 | VSSA | power_in | Analog ground. |+| 9 | VDDA | power_in | Analog power supply, VDDA = VDD to 3.6 V (separate analog supply 2.4 V to 3.6 V for the ADC). |+| 10 | PA0 | bidirectional | 3.3 V tolerant I/O (TTa) directly connected to the ADC; alternate function USART2_CTS, additional functions RTC_TAMP2, WKUP1, ADC_IN0. |+| 11 | PA1 | bidirectional | 3.3 V tolerant I/O (TTa) directly connected to the ADC; alternate functions USART2_RTS and EVENTOUT, additional function ADC_IN1. |+| 12 | PA2 | bidirectional | 3.3 V tolerant I/O (TTa) directly connected to the ADC; alternate function USART2_TX, additional function ADC_IN2. |+| 13 | PA3 | bidirectional | 3.3 V tolerant I/O (TTa) directly connected to the ADC; alternate function USART2_RX, additional function ADC_IN3. |+| 14 | PA4 | bidirectional | 3.3 V tolerant I/O (TTa) directly connected to the ADC; alternate functions SPI1_NSS, USART2_CK, TIM14_CH1 and USB_NOE (STM32F070x6 only), additional function ADC_IN4. |+| 15 | PA5 | bidirectional | 3.3 V tolerant I/O (TTa) directly connected to the ADC; alternate function SPI1_SCK, additional function ADC_IN5. |+| 16 | PA6 | bidirectional | 3.3 V tolerant I/O (TTa) directly connected to the ADC; alternate functions SPI1_MISO, TIM3_CH1, TIM1_BKIN, TIM16_CH1 and EVENTOUT, additional function ADC_IN6. |+| 17 | PA7 | bidirectional | 3.3 V tolerant I/O (TTa) directly connected to the ADC; alternate functions SPI1_MOSI, TIM3_CH2, TIM1_CH1N, TIM14_CH1, TIM17_CH1 and EVENTOUT, additional function ADC_IN7. |+| 18 | PB0 | bidirectional | 3.3 V tolerant I/O (TTa) directly connected to the ADC; alternate functions TIM3_CH3, TIM1_CH2N and EVENTOUT, additional function ADC_IN8. |+| 19 | PB1 | bidirectional | 3.3 V tolerant I/O (TTa) directly connected to the ADC; alternate functions TIM14_CH1, TIM3_CH4 and TIM1_CH3N, additional function ADC_IN9. |+| 20 | PB2 | bidirectional | 5 V tolerant (FT) I/O with no alternate functions listed in the datasheet for this pin. |+| 21 | PB10 | bidirectional | 5 V tolerant (FT) I/O; its listed alternate functions (I2C2_SCL, USART3_TX, SPI2_SCK) are STM32F070xB/RB only, so none is available on the C6 variant. |+| 22 | PB11 | bidirectional | 5 V tolerant (FT) I/O; alternate function EVENTOUT, while its I2C2_SDA and USART3_RX functions are STM32F070xB/RB only. |+| 23 | VSS | power_in | Ground. |+| 24 | VDD | power_in | Digital power supply, VDD = 2.4 V to 3.6 V. |+| 25 | PB12 | bidirectional | 5 V tolerant (FT) I/O; alternate functions EVENTOUT and TIM1_BKIN on this variant (SPI2_NSS, TIM15_BKIN and USART3_CK are STM32F070xB/RB only). |+| 26 | PB13 | bidirectional | 5 V tolerant I/O with FM+ capability (FTf); alternate function TIM1_CH1N on this variant (SPI2_SCK, USART3_CTS and I2C2_SCL are STM32F070xB/RB only). |+| 27 | PB14 | bidirectional | 5 V tolerant I/O with FM+ capability (FTf); alternate function TIM1_CH2N on this variant (SPI2_MISO, TIM15_CH1, I2C2_SDA and USART3_RTS are STM32F070xB/RB only). |+| 28 | PB15 | bidirectional | 5 V tolerant (FT) I/O; alternate function TIM1_CH3N on this variant, additional function RTC_REFIN (WKUP7 is STM32F070xB/RB only). |+| 29 | PA8 | bidirectional | 5 V tolerant (FT) I/O; alternate functions USART1_CK, TIM1_CH1, EVENTOUT and MCO. |+| 30 | PA9 | bidirectional | 5 V tolerant (FT) I/O; alternate functions USART1_TX, TIM1_CH2 and I2C1_SCL (STM32F070x6 only), and PA9/PA10 can be replaced by PA11/PA12 via SYSCFG_CFGR1 on this variant. |+| 31 | PA10 | bidirectional | 5 V tolerant (FT) I/O; alternate functions USART1_RX, TIM1_CH3, TIM17_BKIN and I2C1_SDA (STM32F070x6 only), and it can be remapped to PA12 via SYSCFG_CFGR1 on this variant. |+| 32 | PA11 | bidirectional | 5 V tolerant (FT) I/O; alternate functions EVENTOUT, USART1_CTS and TIM1_CH4, additional function USB_DM, and it can replace PA9 on STM32F070x6 via SYSCFG_CFGR1. |+| 33 | PA12 | bidirectional | 5 V tolerant (FT) I/O; alternate functions EVENTOUT, USART1_RTS and TIM1_ETR, additional function USB_DP, and it can replace PA10 on STM32F070x6 via SYSCFG_CFGR1. |+| 34 | PA13 | bidirectional | 5 V tolerant (FT) I/O; alternate functions SWDIO, IR_OUT and USB_NOE, and after reset it is SWDIO with an internal pull-up enabled. |+| 35 | VSS | power_in | Ground. |+| 36 | VDD | power_in | Digital power supply, VDD = 2.4 V to 3.6 V. |+| 37 | PA14 | bidirectional | 5 V tolerant (FT) I/O; alternate functions USART2_TX and SWCLK, and after reset it is SWCLK with an internal pull-down enabled. |+| 38 | PA15 | bidirectional | 5 V tolerant (FT) I/O; alternate functions SPI1_NSS, USART2_RX and EVENTOUT (USART4_RTS is STM32F070xB/RB only). |+| 39 | PB3 | bidirectional | 5 V tolerant (FT) I/O; alternate functions SPI1_SCK and EVENTOUT. |+| 40 | PB4 | bidirectional | 5 V tolerant (FT) I/O; alternate functions SPI1_MISO, TIM17_BKIN, TIM3_CH1 and EVENTOUT. |+| 41 | PB5 | bidirectional | 5 V tolerant (FT) I/O; alternate functions SPI1_MOSI, I2C1_SMBA, TIM16_BKIN and TIM3_CH2 (WKUP6 is STM32F070xB/RB only). |+| 42 | PB6 | bidirectional | 5 V tolerant I/O with FM+ capability (FTf); alternate functions I2C1_SCL, USART1_TX and TIM16_CH1N. |+| 43 | PB7 | bidirectional | 5 V tolerant I/O with FM+ capability (FTf); alternate functions I2C1_SDA, USART1_RX and TIM17_CH1N (USART4_CTS is STM32F070xB/RB only). |+| 44 | BOOT0 | input | Dedicated BOOT0 pin used for boot memory selection. |+| 45 | PB8 | bidirectional | 5 V tolerant I/O with FM+ capability (FTf); alternate functions I2C1_SCL and TIM16_CH1. |+| 46 | PB9 | bidirectional | 5 V tolerant I/O with FM+ capability (FTf); alternate functions IR_OUT, I2C1_SDA, TIM17_CH1 and EVENTOUT (SPI2_NSS is STM32F070xB/RB only). |+| 47 | VSS | power_in | Ground. |+| 48 | VDD | power_in | Digital power supply, VDD = 2.4 V to 3.6 V. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | LQFP-48(7x7) |+| Category | Embedded Processors & Controllers |+| Pins | 48 |++## CAD (KiCad official)++- Symbol: `STM32F070C6T6TR`+- Footprint: `Package_QFP:LQFP-48_7x7mm_P0.5mm`+- 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)+- 3D model files: `stm32f070c6t6tr-etched.step` / `stm32f070c6t6tr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32f070c6t6tr.step` / `stm32f070c6t6tr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603061200674701312) (83 pp, sha256 `44d1b9bed723a262`, retrieved 2026-10-08, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm32f070c6t6tr-datasheet.pdf)
page.jsonadded+439@@ -0,0 +1,439 @@+{+ "slug": "stm32f070c6t6tr",+ "version": "0.1.0",+ "type": "component",+ "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-48(7x7). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "embedded processors & controllers",+ "stm32f070c6t6tr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "stm32f070c6t6tr.kicad_sym",+ "stm32f070c6t6tr.kicad_mod",+ "stm32f070c6t6tr.glb",+ "stm32f070c6t6tr.step",+ "stm32f070c6t6tr.lbr",+ "docs/hero.png",+ "docs/stm32f070c6t6tr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "stm32f070c6t6tr-hero.glb",+ "stm32f070c6t6tr-hero.overlay.json"+ ],+ "component": {+ "mpn": "STM32F070C6T6TR",+ "manufacturer": "STMicroelectronics",+ "package": "LQFP-48(7x7)",+ "pin_count": 48,+ "category": "Embedded Processors & Controllers",+ "subcategory": "Microcontrollers (MCU/MPU/SOC)",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603061200674701312",+ "parts": {+ "symbol": "stm32f070c6t6tr.kicad_sym",+ "footprint": "stm32f070c6t6tr.kicad_mod",+ "model_3d": "stm32f070c6t6tr-hero.glb",+ "model_3d_plain": "stm32f070c6t6tr.glb",+ "model_3d_step": "stm32f070c6t6tr-etched.step",+ "model_3d_step_plain": "stm32f070c6t6tr.step",+ "lbr": "stm32f070c6t6tr.lbr"+ },+ "distributor_links": {+ "lcsc": "C2970691",+ "digikey": "497-18744-2-ND",+ "mouser": "511-STM32F070C6T6TR"+ },+ "distributor_check": {+ "checked_at": "2026-10-08T18:54:59Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "497-18744-2-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "511-STM32F070C6T6TR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "VDD",+ "type": "power_in",+ "description": "Digital power supply for I/Os and digital circuitry, VDD = 2.4 V to 3.6 V."+ },+ {+ "number": "2",+ "name": "PC13",+ "type": "bidirectional",+ "description": "Standard 3.3 V I/O (TC) powered through the power switch, which sinks at most 3 mA, so output use is limited to 2 MHz with 30 pF and it must not drive LEDs; additional functions WKUP2, RTC_TAMP1, RTC_TS, RTC_OUT."+ },+ {+ "number": "3",+ "name": "PC14-OSC32_IN",+ "type": "bidirectional",+ "description": "Standard 3.3 V I/O (TC) powered through the power switch with the same 3 mA limit and output limits (2 MHz, 30 pF, no current sourcing); additional function OSC32_IN for the 32 kHz oscillator."+ },+ {+ "number": "4",+ "name": "PC15-OSC32_OUT",+ "type": "bidirectional",+ "description": "Standard 3.3 V I/O (TC) powered through the power switch with the same 3 mA limit and output limits (2 MHz, 30 pF, no current sourcing); additional function OSC32_OUT for the 32 kHz oscillator."+ },+ {+ "number": "5",+ "name": "PF0-OSC_IN",+ "type": "bidirectional",+ "description": "5 V tolerant (FT) I/O; alternate function I2C1_SDA is available on STM32F070x6 devices only, and it serves as OSC_IN for the 4 to 32 MHz crystal oscillator."+ },+ {+ "number": "6",+ "name": "PF1-OSC_OUT",+ "type": "bidirectional",+ "description": "5 V tolerant (FT) I/O; alternate function I2C1_SCL is available on STM32F070x6 devices only, and it serves as OSC_OUT for the 4 to 32 MHz crystal oscillator."+ },+ {+ "number": "7",+ "name": "NRST",+ "type": "bidirectional",+ "description": "Bidirectional reset pin with embedded weak pull-up, acting as active-low device reset input and internal reset output."+ },+ {+ "number": "8",+ "name": "VSSA",+ "type": "power_in",+ "description": "Analog ground."+ },+ {+ "number": "9",+ "name": "VDDA",+ "type": "power_in",+ "description": "Analog power supply, VDDA = VDD to 3.6 V (separate analog supply 2.4 V to 3.6 V for the ADC)."+ },+ {+ "number": "10",+ "name": "PA0",+ "type": "bidirectional",+ "description": "3.3 V tolerant I/O (TTa) directly connected to the ADC; alternate function USART2_CTS, additional functions RTC_TAMP2, WKUP1, ADC_IN0."+ },+ {+ "number": "11",+ "name": "PA1",+ "type": "bidirectional",+ "description": "3.3 V tolerant I/O (TTa) directly connected to the ADC; alternate functions USART2_RTS and EVENTOUT, additional function ADC_IN1."+ },+ {+ "number": "12",+ "name": "PA2",+ "type": "bidirectional",+ "description": "3.3 V tolerant I/O (TTa) directly connected to the ADC; alternate function USART2_TX, additional function ADC_IN2."+ },+ {+ "number": "13",+ "name": "PA3",+ "type": "bidirectional",+ "description": "3.3 V tolerant I/O (TTa) directly connected to the ADC; alternate function USART2_RX, additional function ADC_IN3."+ },+ {+ "number": "14",+ "name": "PA4",+ "type": "bidirectional",+ "description": "3.3 V tolerant I/O (TTa) directly connected to the ADC; alternate functions SPI1_NSS, USART2_CK, TIM14_CH1 and USB_NOE (STM32F070x6 only), additional function ADC_IN4."+ },+ {+ "number": "15",+ "name": "PA5",+ "type": "bidirectional",+ "description": "3.3 V tolerant I/O (TTa) directly connected to the ADC; alternate function SPI1_SCK, additional function ADC_IN5."+ },+ {+ "number": "16",+ "name": "PA6",+ "type": "bidirectional",+ "description": "3.3 V tolerant I/O (TTa) directly connected to the ADC; alternate functions SPI1_MISO, TIM3_CH1, TIM1_BKIN, TIM16_CH1 and EVENTOUT, additional function ADC_IN6."+ },+ {+ "number": "17",+ "name": "PA7",+ "type": "bidirectional",+ "description": "3.3 V tolerant I/O (TTa) directly connected to the ADC; alternate functions SPI1_MOSI, TIM3_CH2, TIM1_CH1N, TIM14_CH1, TIM17_CH1 and EVENTOUT, additional function ADC_IN7."+ },+ {+ "number": "18",+ "name": "PB0",+ "type": "bidirectional",+ "description": "3.3 V tolerant I/O (TTa) directly connected to the ADC; alternate functions TIM3_CH3, TIM1_CH2N and EVENTOUT, additional function ADC_IN8."+ },+ {+ "number": "19",+ "name": "PB1",+ "type": "bidirectional",+ "description": "3.3 V tolerant I/O (TTa) directly connected to the ADC; alternate functions TIM14_CH1, TIM3_CH4 and TIM1_CH3N, additional function ADC_IN9."+ },+ {+ "number": "20",+ "name": "PB2",+ "type": "bidirectional",+ "description": "5 V tolerant (FT) I/O with no alternate functions listed in the datasheet for this pin."+ },+ {+ "number": "21",+ "name": "PB10",+ "type": "bidirectional",+ "description": "5 V tolerant (FT) I/O; its listed alternate functions (I2C2_SCL, USART3_TX, SPI2_SCK) are STM32F070xB/RB only, so none is available on the C6 variant."+ },+ {+ "number": "22",+ "name": "PB11",+ "type": "bidirectional",+ "description": "5 V tolerant (FT) I/O; alternate function EVENTOUT, while its I2C2_SDA and USART3_RX functions are STM32F070xB/RB only."+ },+ {+ "number": "23",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground."+ },+ {+ "number": "24",+ "name": "VDD",+ "type": "power_in",+ "description": "Digital power supply, VDD = 2.4 V to 3.6 V."+ },+ {+ "number": "25",+ "name": "PB12",+ "type": "bidirectional",+ "description": "5 V tolerant (FT) I/O; alternate functions EVENTOUT and TIM1_BKIN on this variant (SPI2_NSS, TIM15_BKIN and USART3_CK are STM32F070xB/RB only)."+ },+ {+ "number": "26",+ "name": "PB13",+ "type": "bidirectional",+ "description": "5 V tolerant I/O with FM+ capability (FTf); alternate function TIM1_CH1N on this variant (SPI2_SCK, USART3_CTS and I2C2_SCL are STM32F070xB/RB only)."+ },+ {+ "number": "27",+ "name": "PB14",+ "type": "bidirectional",+ "description": "5 V tolerant I/O with FM+ capability (FTf); alternate function TIM1_CH2N on this variant (SPI2_MISO, TIM15_CH1, I2C2_SDA and USART3_RTS are STM32F070xB/RB only)."+ },+ {+ "number": "28",+ "name": "PB15",+ "type": "bidirectional",+ "description": "5 V tolerant (FT) I/O; alternate function TIM1_CH3N on this variant, additional function RTC_REFIN (WKUP7 is STM32F070xB/RB only)."+ },+ {+ "number": "29",+ "name": "PA8",+ "type": "bidirectional",+ "description": "5 V tolerant (FT) I/O; alternate functions USART1_CK, TIM1_CH1, EVENTOUT and MCO."+ },+ {+ "number": "30",+ "name": "PA9",+ "type": "bidirectional",+ "description": "5 V tolerant (FT) I/O; alternate functions USART1_TX, TIM1_CH2 and I2C1_SCL (STM32F070x6 only), and PA9/PA10 can be replaced by PA11/PA12 via SYSCFG_CFGR1 on this variant."+ },+ {+ "number": "31",+ "name": "PA10",+ "type": "bidirectional",+ "description": "5 V tolerant (FT) I/O; alternate functions USART1_RX, TIM1_CH3, TIM17_BKIN and I2C1_SDA (STM32F070x6 only), and it can be remapped to PA12 via SYSCFG_CFGR1 on this variant."+ },+ {+ "number": "32",+ "name": "PA11",+ "type": "bidirectional",+ "description": "5 V tolerant (FT) I/O; alternate functions EVENTOUT, USART1_CTS and TIM1_CH4, additional function USB_DM, and it can replace PA9 on STM32F070x6 via SYSCFG_CFGR1."+ },+ {+ "number": "33",+ "name": "PA12",+ "type": "bidirectional",+ "description": "5 V tolerant (FT) I/O; alternate functions EVENTOUT, USART1_RTS and TIM1_ETR, additional function USB_DP, and it can replace PA10 on STM32F070x6 via SYSCFG_CFGR1."+ },+ {+ "number": "34",+ "name": "PA13",+ "type": "bidirectional",+ "description": "5 V tolerant (FT) I/O; alternate functions SWDIO, IR_OUT and USB_NOE, and after reset it is SWDIO with an internal pull-up enabled."+ },+ {+ "number": "35",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground."+ },+ {+ "number": "36",+ "name": "VDD",+ "type": "power_in",+ "description": "Digital power supply, VDD = 2.4 V to 3.6 V."+ },+ {+ "number": "37",+ "name": "PA14",+ "type": "bidirectional",+ "description": "5 V tolerant (FT) I/O; alternate functions USART2_TX and SWCLK, and after reset it is SWCLK with an internal pull-down enabled."+ },+ {+ "number": "38",+ "name": "PA15",+ "type": "bidirectional",+ "description": "5 V tolerant (FT) I/O; alternate functions SPI1_NSS, USART2_RX and EVENTOUT (USART4_RTS is STM32F070xB/RB only)."+ },+ {+ "number": "39",+ "name": "PB3",+ "type": "bidirectional",+ "description": "5 V tolerant (FT) I/O; alternate functions SPI1_SCK and EVENTOUT."+ },+ {+ "number": "40",+ "name": "PB4",+ "type": "bidirectional",+ "description": "5 V tolerant (FT) I/O; alternate functions SPI1_MISO, TIM17_BKIN, TIM3_CH1 and EVENTOUT."+ },+ {+ "number": "41",+ "name": "PB5",+ "type": "bidirectional",+ "description": "5 V tolerant (FT) I/O; alternate functions SPI1_MOSI, I2C1_SMBA, TIM16_BKIN and TIM3_CH2 (WKUP6 is STM32F070xB/RB only)."+ },+ {+ "number": "42",+ "name": "PB6",+ "type": "bidirectional",+ "description": "5 V tolerant I/O with FM+ capability (FTf); alternate functions I2C1_SCL, USART1_TX and TIM16_CH1N."+ },+ {+ "number": "43",+ "name": "PB7",+ "type": "bidirectional",+ "description": "5 V tolerant I/O with FM+ capability (FTf); alternate functions I2C1_SDA, USART1_RX and TIM17_CH1N (USART4_CTS is STM32F070xB/RB only)."+ },+ {+ "number": "44",+ "name": "BOOT0",+ "type": "input",+ "description": "Dedicated BOOT0 pin used for boot memory selection."+ },+ {+ "number": "45",+ "name": "PB8",+ "type": "bidirectional",+ "description": "5 V tolerant I/O with FM+ capability (FTf); alternate functions I2C1_SCL and TIM16_CH1."+ },+ {+ "number": "46",+ "name": "PB9",+ "type": "bidirectional",+ "description": "5 V tolerant I/O with FM+ capability (FTf); alternate functions IR_OUT, I2C1_SDA, TIM17_CH1 and EVENTOUT (SPI2_NSS is STM32F070xB/RB only)."+ },+ {+ "number": "47",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground."+ },+ {+ "number": "48",+ "name": "VDD",+ "type": "power_in",+ "description": "Digital power supply, VDD = 2.4 V to 3.6 V."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Package selection: MPN STM32F070C6T6 decodes to 48 pins (C), LQFP (T), 32 KB Flash (6), so the LQFP4; Variant-dependent functions: the C6 part is in the STM32F070x6 group. Alternate functions that the d; Datasheet limits: the datasheet gives I/O structure classes (TC, TTa, FT, FTf, RST) and footnote lim"+ ],+ "pages_sent": 33,+ "cost_usd": 0.1769,+ "at": "2026-10-08T18:54:20"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603061200674701312",+ "pages": 83,+ "sha256": "44d1b9bed723a262",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 48,+ "described": 48,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "stm32f070c6t6tr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 9,+ 9,+ 1.5+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "9dea352d93177c2904afd7d7b68ea8855ce1ab691f69f8b3e13655600514b6bf",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "stm32f070c6t6tr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 9,+ 9,+ 1.5+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "4411a17e81c394a2bd3a2494aea7817162348afa415da36a030d5e88975a5d67",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}