← Commit history

Initial commit: component/stm32f051k6t6

Ray ·5e62585ec3 ·
2 files changed +355
README.mdadded+68
@@ -0,0 +1,68 @@+# STM32F051K6T6++**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · QFP-32(7x7)++STM32F051K6T6 from STMicroelectronics, in a QFP-32(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VDD | power_in | Digital power supply input pin; VDD (=VDDIO1) operating range is 2.0 V to 3.6 V and must be decoupled per the recommended power-supply scheme. |+| 2 | PF0-OSC_IN | bidirectional | Port F GPIO0, 5V-tolerant (FT) I/O, floating input by default after reset; additional function OSC_IN, the external 4-32 MHz oscillator input. |+| 3 | PF1-OSC_OUT | bidirectional | Port F GPIO1, 5V-tolerant (FT) I/O, floating input by default after reset; additional function OSC_OUT, the external high-speed oscillator output. |+| 4 | NRST | bidirectional | Bidirectional reset pin with an embedded weak pull-up resistor; device reset input / internal reset output, active low. |+| 5 | VDDA | power_in | Analog power supply pin for ADC, DAC, reset blocks, RCs and PLL; must be from VDD to 3.6 V, with a minimum of 2.4 V when the ADC or DAC is used. |+| 6 | PA0 | bidirectional | Port A GPIO0, ADC-capable 3.3V (TTa) I/O; alternate functions USART2_CTS, TIM2_CH1_ETR, COMP1_OUT, TSC_G1_IO1; additional functions ADC_IN0, COMP1_INM6, RTC_TAMP2, WKUP1 (wakeup from Standby). |+| 7 | PA1 | bidirectional | Port A GPIO1, TTa I/O; alternate functions USART2_RTS, TIM2_CH2, TSC_G1_IO2, EVENTOUT; additional functions ADC_IN1, COMP1_INP. |+| 8 | PA2 | bidirectional | Port A GPIO2, TTa I/O; alternate functions USART2_TX, TIM2_CH3, TIM15_CH1, COMP2_OUT, TSC_G1_IO3; additional functions ADC_IN2, COMP2_INM6. |+| 9 | PA3 | bidirectional | Port A GPIO3, TTa I/O; alternate functions USART2_RX, TIM2_CH4, TIM15_CH2, TSC_G1_IO4; additional functions ADC_IN3, COMP2_INP. |+| 10 | PA4 | bidirectional | Port A GPIO4, TTa I/O; alternate functions SPI1_NSS, I2S1_WS, USART2_CK, TIM14_CH1, TSC_G2_IO1; additional functions ADC_IN4, COMP1_INM4, COMP2_INM4, DAC_OUT1. |+| 11 | PA5 | bidirectional | Port A GPIO5, TTa I/O; alternate functions SPI1_SCK, I2S1_CK, CEC, TIM2_CH1_ETR, TSC_G2_IO2; additional functions ADC_IN5, COMP1_INM5, COMP2_INM5. |+| 12 | PA6 | bidirectional | Port A GPIO6, TTa I/O; alternate functions SPI1_MISO, I2S1_MCK, TIM3_CH1, TIM1_BKIN, TIM16_CH1, COMP1_OUT, TSC_G2_IO3, EVENTOUT; additional function ADC_IN6. |+| 13 | PA7 | bidirectional | Port A GPIO7, TTa I/O; alternate functions SPI1_MOSI, I2S1_SD, TIM3_CH2, TIM14_CH1, TIM1_CH1N, TIM17_CH1, COMP2_OUT, TSC_G2_IO4, EVENTOUT; additional function ADC_IN7. |+| 14 | PB0 | bidirectional | Port B GPIO0, TTa I/O; alternate functions TIM3_CH3, TIM1_CH2N, TSC_G3_IO2, EVENTOUT; additional function ADC_IN8. |+| 15 | PB1 | bidirectional | Port B GPIO1, TTa I/O; alternate functions TIM3_CH4, TIM14_CH1, TIM1_CH3N, TSC_G3_IO3; additional function ADC_IN9. |+| 16 | VSS | power_in | Ground pin; on the LQFP32 package this pin also carries the VSSA analog ground since a distinct VSSA pin is only available on packages with 48 pins or more (VSSA pad connected internally to this VSS pin). |+| 17 | VDD | power_in | Digital power supply input pin; VDD operating range is 2.0 V to 3.6 V. |+| 18 | PA8 | bidirectional | Port A GPIO8, 5V-tolerant (FT) I/O; alternate functions USART1_CK, TIM1_CH1, EVENTOUT, MCO. |+| 19 | PA9 | bidirectional | Port A GPIO9, FT I/O; alternate functions USART1_TX, TIM1_CH2, TIM15_BKIN, TSC_G4_IO1. |+| 20 | PA10 | bidirectional | Port A GPIO10, FT I/O; alternate functions USART1_RX, TIM1_CH3, TIM17_BKIN, TSC_G4_IO2. |+| 21 | PA11 | bidirectional | Port A GPIO11, FT I/O; alternate functions USART1_CTS, TIM1_CH4, COMP1_OUT, TSC_G4_IO3, EVENTOUT. |+| 22 | PA12 | bidirectional | Port A GPIO12, FT I/O; alternate functions USART1_RTS, TIM1_ETR, COMP2_OUT, TSC_G4_IO4, EVENTOUT. |+| 23 | PA13 | bidirectional | Port A GPIO13; after reset configured as SWDIO alternate function with internal pull-up activated, FT I/O; also usable as IR_OUT. |+| 24 | PA14 | bidirectional | Port A GPIO14; after reset configured as SWCLK alternate function with internal pull-down activated, FT I/O; also usable as USART2_TX. |+| 25 | PA15 | bidirectional | Port A GPIO15, FT I/O; alternate functions SPI1_NSS, I2S1_WS, USART2_RX, TIM2_CH1_ETR, EVENTOUT. |+| 26 | PB3 | bidirectional | Port B GPIO3, FT I/O; alternate functions SPI1_SCK, I2S1_CK, TIM2_CH2, TSC_G5_IO1, EVENTOUT. |+| 27 | PB4 | bidirectional | Port B GPIO4, FT I/O; alternate functions SPI1_MISO, I2S1_MCK, TIM3_CH1, TSC_G5_IO2, EVENTOUT. |+| 28 | PB5 | bidirectional | Port B GPIO5, FT I/O; alternate functions SPI1_MOSI, I2S1_SD, I2C1_SMBA, TIM16_BKIN, TIM3_CH2. |+| 29 | PB6 | bidirectional | Port B GPIO6, 5V-tolerant Fast-Mode-Plus capable (FTf) I/O; alternate functions I2C1_SCL, USART1_TX, TIM16_CH1N, TSC_G5_IO3. |+| 30 | PB7 | bidirectional | Port B GPIO7, FTf I/O; alternate functions I2C1_SDA, USART1_RX, TIM17_CH1N, TSC_G5_IO4. |+| 31 | BOOT0 | input | Dedicated boot-mode selection input pin sampled at reset to choose the boot source (Flash, System memory, or SRAM); input voltage range 0 to 9.0 V absolute maximum (0 to 5.5 V operating). |+| 32 | VSS | power_in | Ground pin. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | QFP-32(7x7) |+| Category | Embedded Processors & Controllers |+| Pins | 32 |++## CAD (KiCad official)++- Symbol: `STM32F051K6T6`+- Footprint: `Package_QFP:LQFP-32_7x7mm_P0.8mm`+- 3D model: QFP-32(7x7) (KiCad packages3D, STEP)+- 3D model files: `stm32f051k6t6-etched.step` / `stm32f051k6t6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32f051k6t6.step` / `stm32f051k6t6.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586181505571819520) (122 pp, sha256 `80848a22804e56d8`, retrieved 2026-09-23, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm32f051k6t6-datasheet.pdf)
page.jsonadded+287
@@ -0,0 +1,287 @@+{+  "slug": "stm32f051k6t6",+  "version": "0.1.0",+  "type": "component",+  "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), QFP-32(7x7). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "embedded processors & controllers",+    "stm32f051k6t6",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "stm32f051k6t6.kicad_sym",+    "stm32f051k6t6.kicad_mod",+    "stm32f051k6t6.glb",+    "stm32f051k6t6.step",+    "stm32f051k6t6.lbr",+    "docs/hero.png",+    "docs/stm32f051k6t6-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "STM32F051K6T6",+    "manufacturer": "STMicroelectronics",+    "package": "QFP-32(7x7)",+    "pin_count": 32,+    "category": "Embedded Processors & Controllers",+    "subcategory": "Microcontrollers (MCU/MPU/SOC)",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586181505571819520",+    "parts": {+      "symbol": "stm32f051k6t6.kicad_sym",+      "footprint": "stm32f051k6t6.kicad_mod",+      "model_3d": "stm32f051k6t6-etched.glb",+      "model_3d_plain": "stm32f051k6t6.glb",+      "model_3d_step": "stm32f051k6t6-etched.step",+      "model_3d_step_plain": "stm32f051k6t6.step",+      "lbr": "stm32f051k6t6.lbr"+    },+    "distributor_links": {+      "lcsc": "C88443"+    },+    "pins": [+      {+        "number": "1",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital power supply input pin; VDD (=VDDIO1) operating range is 2.0 V to 3.6 V and must be decoupled per the recommended power-supply scheme."+      },+      {+        "number": "2",+        "name": "PF0-OSC_IN",+        "type": "bidirectional",+        "description": "Port F GPIO0, 5V-tolerant (FT) I/O, floating input by default after reset; additional function OSC_IN, the external 4-32 MHz oscillator input."+      },+      {+        "number": "3",+        "name": "PF1-OSC_OUT",+        "type": "bidirectional",+        "description": "Port F GPIO1, 5V-tolerant (FT) I/O, floating input by default after reset; additional function OSC_OUT, the external high-speed oscillator output."+      },+      {+        "number": "4",+        "name": "NRST",+        "type": "bidirectional",+        "description": "Bidirectional reset pin with an embedded weak pull-up resistor; device reset input / internal reset output, active low."+      },+      {+        "number": "5",+        "name": "VDDA",+        "type": "power_in",+        "description": "Analog power supply pin for ADC, DAC, reset blocks, RCs and PLL; must be from VDD to 3.6 V, with a minimum of 2.4 V when the ADC or DAC is used."+      },+      {+        "number": "6",+        "name": "PA0",+        "type": "bidirectional",+        "description": "Port A GPIO0, ADC-capable 3.3V (TTa) I/O; alternate functions USART2_CTS, TIM2_CH1_ETR, COMP1_OUT, TSC_G1_IO1; additional functions ADC_IN0, COMP1_INM6, RTC_TAMP2, WKUP1 (wakeup from Standby)."+      },+      {+        "number": "7",+        "name": "PA1",+        "type": "bidirectional",+        "description": "Port A GPIO1, TTa I/O; alternate functions USART2_RTS, TIM2_CH2, TSC_G1_IO2, EVENTOUT; additional functions ADC_IN1, COMP1_INP."+      },+      {+        "number": "8",+        "name": "PA2",+        "type": "bidirectional",+        "description": "Port A GPIO2, TTa I/O; alternate functions USART2_TX, TIM2_CH3, TIM15_CH1, COMP2_OUT, TSC_G1_IO3; additional functions ADC_IN2, COMP2_INM6."+      },+      {+        "number": "9",+        "name": "PA3",+        "type": "bidirectional",+        "description": "Port A GPIO3, TTa I/O; alternate functions USART2_RX, TIM2_CH4, TIM15_CH2, TSC_G1_IO4; additional functions ADC_IN3, COMP2_INP."+      },+      {+        "number": "10",+        "name": "PA4",+        "type": "bidirectional",+        "description": "Port A GPIO4, TTa I/O; alternate functions SPI1_NSS, I2S1_WS, USART2_CK, TIM14_CH1, TSC_G2_IO1; additional functions ADC_IN4, COMP1_INM4, COMP2_INM4, DAC_OUT1."+      },+      {+        "number": "11",+        "name": "PA5",+        "type": "bidirectional",+        "description": "Port A GPIO5, TTa I/O; alternate functions SPI1_SCK, I2S1_CK, CEC, TIM2_CH1_ETR, TSC_G2_IO2; additional functions ADC_IN5, COMP1_INM5, COMP2_INM5."+      },+      {+        "number": "12",+        "name": "PA6",+        "type": "bidirectional",+        "description": "Port A GPIO6, TTa I/O; alternate functions SPI1_MISO, I2S1_MCK, TIM3_CH1, TIM1_BKIN, TIM16_CH1, COMP1_OUT, TSC_G2_IO3, EVENTOUT; additional function ADC_IN6."+      },+      {+        "number": "13",+        "name": "PA7",+        "type": "bidirectional",+        "description": "Port A GPIO7, TTa I/O; alternate functions SPI1_MOSI, I2S1_SD, TIM3_CH2, TIM14_CH1, TIM1_CH1N, TIM17_CH1, COMP2_OUT, TSC_G2_IO4, EVENTOUT; additional function ADC_IN7."+      },+      {+        "number": "14",+        "name": "PB0",+        "type": "bidirectional",+        "description": "Port B GPIO0, TTa I/O; alternate functions TIM3_CH3, TIM1_CH2N, TSC_G3_IO2, EVENTOUT; additional function ADC_IN8."+      },+      {+        "number": "15",+        "name": "PB1",+        "type": "bidirectional",+        "description": "Port B GPIO1, TTa I/O; alternate functions TIM3_CH4, TIM14_CH1, TIM1_CH3N, TSC_G3_IO3; additional function ADC_IN9."+      },+      {+        "number": "16",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground pin; on the LQFP32 package this pin also carries the VSSA analog ground since a distinct VSSA pin is only available on packages with 48 pins or more (VSSA pad connected internally to this VSS pin)."+      },+      {+        "number": "17",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital power supply input pin; VDD operating range is 2.0 V to 3.6 V."+      },+      {+        "number": "18",+        "name": "PA8",+        "type": "bidirectional",+        "description": "Port A GPIO8, 5V-tolerant (FT) I/O; alternate functions USART1_CK, TIM1_CH1, EVENTOUT, MCO."+      },+      {+        "number": "19",+        "name": "PA9",+        "type": "bidirectional",+        "description": "Port A GPIO9, FT I/O; alternate functions USART1_TX, TIM1_CH2, TIM15_BKIN, TSC_G4_IO1."+      },+      {+        "number": "20",+        "name": "PA10",+        "type": "bidirectional",+        "description": "Port A GPIO10, FT I/O; alternate functions USART1_RX, TIM1_CH3, TIM17_BKIN, TSC_G4_IO2."+      },+      {+        "number": "21",+        "name": "PA11",+        "type": "bidirectional",+        "description": "Port A GPIO11, FT I/O; alternate functions USART1_CTS, TIM1_CH4, COMP1_OUT, TSC_G4_IO3, EVENTOUT."+      },+      {+        "number": "22",+        "name": "PA12",+        "type": "bidirectional",+        "description": "Port A GPIO12, FT I/O; alternate functions USART1_RTS, TIM1_ETR, COMP2_OUT, TSC_G4_IO4, EVENTOUT."+      },+      {+        "number": "23",+        "name": "PA13",+        "type": "bidirectional",+        "description": "Port A GPIO13; after reset configured as SWDIO alternate function with internal pull-up activated, FT I/O; also usable as IR_OUT."+      },+      {+        "number": "24",+        "name": "PA14",+        "type": "bidirectional",+        "description": "Port A GPIO14; after reset configured as SWCLK alternate function with internal pull-down activated, FT I/O; also usable as USART2_TX."+      },+      {+        "number": "25",+        "name": "PA15",+        "type": "bidirectional",+        "description": "Port A GPIO15, FT I/O; alternate functions SPI1_NSS, I2S1_WS, USART2_RX, TIM2_CH1_ETR, EVENTOUT."+      },+      {+        "number": "26",+        "name": "PB3",+        "type": "bidirectional",+        "description": "Port B GPIO3, FT I/O; alternate functions SPI1_SCK, I2S1_CK, TIM2_CH2, TSC_G5_IO1, EVENTOUT."+      },+      {+        "number": "27",+        "name": "PB4",+        "type": "bidirectional",+        "description": "Port B GPIO4, FT I/O; alternate functions SPI1_MISO, I2S1_MCK, TIM3_CH1, TSC_G5_IO2, EVENTOUT."+      },+      {+        "number": "28",+        "name": "PB5",+        "type": "bidirectional",+        "description": "Port B GPIO5, FT I/O; alternate functions SPI1_MOSI, I2S1_SD, I2C1_SMBA, TIM16_BKIN, TIM3_CH2."+      },+      {+        "number": "29",+        "name": "PB6",+        "type": "bidirectional",+        "description": "Port B GPIO6, 5V-tolerant Fast-Mode-Plus capable (FTf) I/O; alternate functions I2C1_SCL, USART1_TX, TIM16_CH1N, TSC_G5_IO3."+      },+      {+        "number": "30",+        "name": "PB7",+        "type": "bidirectional",+        "description": "Port B GPIO7, FTf I/O; alternate functions I2C1_SDA, USART1_RX, TIM17_CH1N, TSC_G5_IO4."+      },+      {+        "number": "31",+        "name": "BOOT0",+        "type": "input",+        "description": "Dedicated boot-mode selection input pin sampled at reset to choose the boot source (Flash, System memory, or SRAM); input voltage range 0 to 9.0 V absolute maximum (0 to 5.5 V operating)."+      },+      {+        "number": "32",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground pin."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: Pin 16 (PB2) is marked as unconnected pad on LQFP32 per note 4: 'PB2 and PB8 must be set to defined ; Pin type assignments use KiCad ERC classes: power_in for all power supply pins (VDD, VSS, VDDA) whic"+        ],+        "pages_sent": 122,+        "cost_usd": 1.3491,+        "at": "2026-09-23T13:32:31"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586181505571819520",+        "pages": 122,+        "sha256": "80848a22804e56d8",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 32,+        "described": 32,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file