component
STM32F030K6T6
Public Made by Adomby adom
STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-32(7x7). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
← Commit history
Publish 0.1.1
5 files changed
+122−90
README.md+7−4@@ -8,8 +8,10 @@ STM32F030K6T6 from STMicroelectronics, in a LQFP-32(7x7). Pinout and pin descrip | Pin | Name | Type | Function | |---|---|---|---|-| 1 | BOOT0 | input | Boot memory selection pin; determines whether boot from Flash or from system memory upon reset |-| 4 | NRST | bidirectional | Device reset input with embedded weak pull-up resistor, active low; performs system reset when pulled below threshold |+| 1 | VDD | power_in | Digital power supply operating voltage 2.4 to 3.6 V; provides main supply to MCU core and digital circuits |+| 2 | PF0-OSC_IN | bidirectional | |+| 3 | PF1-OSC_OUT | bidirectional | |+| 4 | NRST | input | Device reset input with embedded weak pull-up resistor, active low; performs system reset when pulled below threshold | | 5 | VDDA | power_in | Analog power supply operating voltage 2.4 to 3.6 V; must be equal to or higher than VDD | | 6 | PA0 | bidirectional | Port A pin 0 general-purpose I/O with alternate functions USART1_CTS, USART2_CTS, USART4_TX and additional functions ADC_IN0, RTC_TAMP2, WKUP1 | | 7 | PA1 | bidirectional | Port A pin 1 general-purpose I/O with alternate functions USART1_RTS, USART2_RTS, USART4_RX, EVENTOUT and additional function ADC_IN1 |@@ -19,6 +21,7 @@ STM32F030K6T6 from STMicroelectronics, in a LQFP-32(7x7). Pinout and pin descrip | 11 | PA5 | bidirectional | Port A pin 5 general-purpose I/O with alternate functions SPI1_SCK, USART6_RX and additional function ADC_IN5 | | 12 | PA6 | bidirectional | Port A pin 6 general-purpose I/O with alternate functions SPI1_MISO, TIM3_CH1, TIM1_BKIN, TIM16_CH1, EVENTOUT, USART3_CTS and additional function ADC_IN6 | | 13 | PA7 | bidirectional | Port A pin 7 general-purpose I/O with alternate functions SPI1_MOSI, TIM3_CH2, TIM14_CH1, TIM1_CH1N, TIM17_CH1, EVENTOUT and additional function ADC_IN7 |+| 14 | PB0 | bidirectional | | | 15 | PB1 | bidirectional | Port B pin 1 general-purpose I/O with alternate functions TIM3_CH4, TIM14_CH1, TIM1_CH3N, USART3_RTS and additional function ADC_IN9 | | 16 | VSS | power_in | Ground connection and power supply return (0 V reference); must be connected to external ground | | 17 | VDD | power_in | Digital power supply operating voltage 2.4 to 3.6 V; provides main supply to MCU core and digital circuits |@@ -35,8 +38,8 @@ STM32F030K6T6 from STMicroelectronics, in a LQFP-32(7x7). Pinout and pin descrip | 28 | PB5 | bidirectional | Port B pin 5 general-purpose I/O with alternate functions SPI1_MOSI, I2C1_SMBA, TIM16_BKIN, TIM3_CH2, USART5_CK_RTS and 5V tolerant | | 29 | PB6 | bidirectional | Port B pin 6 general-purpose I/O with alternate functions I2C1_SCL, USART1_TX, TIM16_CH1N; 5V tolerant FM+ capable supporting 1 Mbit/s I2C | | 30 | PB7 | bidirectional | Port B pin 7 general-purpose I/O with alternate functions I2C1_SDA, USART1_RX, TIM17_CH1N, USART4_CTS, RTC_REFIN; 5V tolerant FM+ capable |-| 31 | PF0 | bidirectional | Port F pin 0 (OSC_IN) general-purpose I/O with oscillator input function and alternate function I2C1_SDA; 5V tolerant |-| 32 | PF1 | bidirectional | Port F pin 1 (OSC_OUT) general-purpose I/O with oscillator output function and alternate function I2C1_SCL; 5V tolerant |+| 31 | BOOT0 | input | Boot memory selection pin; determines whether boot from Flash or from system memory upon reset |+| 32 | VSS | power_in | Ground connection and power supply return (0 V reference); must be connected to external ground | ## Key specifications
package.json+2−2@@ -1,6 +1,6 @@ { "slug": "stm32f030k6t6",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-32(7x7). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.", "tags": [@@ -259,4 +259,4 @@ "footprint": "viewers/footprint.html" } }-}+}
page.json+4−4@@ -4,7 +4,7 @@ "slug": "stm32f030k6t6", "title": "STM32F030K6T6", "brief": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-32(7x7). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",- "version": "0.1.0",+ "version": "0.1.1", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -286,7 +286,7 @@ "viewers/symbol.html", "viewers/footprint.html" ],- "visibility": {- "public": true- }+ "visibility": "public",+ "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-32(7x7). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",+ "org": "adom" }
stm32f030k6t6.kicad_sym+51−39@@ -1,129 +1,141 @@ (kicad_symbol_lib (version 20211014) (generator ds2sf_rect) (symbol "STM32F030K6T6" (in_bom yes) (on_board yes) (property "Reference" "U" (at 0 22.86 0) (effects (font (size 1.27 1.27))))- (property "Value" "STM32F030K6T6" (at 0 -22.86 0) (effects (font (size 1.27 1.27))))+ (property "Value" "STM32F030K6T6" (at 0 -25.40 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "" (at 0 0 0) (effects (font (size 1.27 1.27)) hide)) (symbol "STM32F030K6T6_0_1"- (rectangle (start -12.70 20.32) (end 12.70 -20.32)+ (rectangle (start -12.70 20.32) (end 12.70 -22.86) (stroke (width 0.254) (type default)) (fill (type background))) ) (symbol "STM32F030K6T6_1_1"- (pin input line (at -17.78 17.78 0) (length 5.08)- (name "BOOT0" (effects (font (size 1.27 1.27))))+ (pin power_in line (at -17.78 17.78 0) (length 5.08)+ (name "VDD" (effects (font (size 1.27 1.27)))) (number "1" (effects (font (size 1.27 1.27)))) ) (pin bidirectional line (at -17.78 15.24 0) (length 5.08)+ (name "PF0-OSC_IN" (effects (font (size 1.27 1.27))))+ (number "2" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at -17.78 12.70 0) (length 5.08)+ (name "PF1-OSC_OUT" (effects (font (size 1.27 1.27))))+ (number "3" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at -17.78 10.16 0) (length 5.08) (name "NRST" (effects (font (size 1.27 1.27)))) (number "4" (effects (font (size 1.27 1.27)))) )- (pin power_in line (at -17.78 12.70 0) (length 5.08)+ (pin power_in line (at -17.78 7.62 0) (length 5.08) (name "VDDA" (effects (font (size 1.27 1.27)))) (number "5" (effects (font (size 1.27 1.27)))) )- (pin bidirectional line (at -17.78 10.16 0) (length 5.08)+ (pin bidirectional line (at -17.78 5.08 0) (length 5.08) (name "PA0" (effects (font (size 1.27 1.27)))) (number "6" (effects (font (size 1.27 1.27)))) )- (pin bidirectional line (at -17.78 7.62 0) (length 5.08)+ (pin bidirectional line (at -17.78 2.54 0) (length 5.08) (name "PA1" (effects (font (size 1.27 1.27)))) (number "7" (effects (font (size 1.27 1.27)))) )- (pin bidirectional line (at -17.78 5.08 0) (length 5.08)+ (pin bidirectional line (at -17.78 0.00 0) (length 5.08) (name "PA2" (effects (font (size 1.27 1.27)))) (number "8" (effects (font (size 1.27 1.27)))) )- (pin bidirectional line (at -17.78 2.54 0) (length 5.08)+ (pin bidirectional line (at -17.78 -2.54 0) (length 5.08) (name "PA3" (effects (font (size 1.27 1.27)))) (number "9" (effects (font (size 1.27 1.27)))) )- (pin bidirectional line (at -17.78 0.00 0) (length 5.08)+ (pin bidirectional line (at -17.78 -5.08 0) (length 5.08) (name "PA4" (effects (font (size 1.27 1.27)))) (number "10" (effects (font (size 1.27 1.27)))) )- (pin bidirectional line (at -17.78 -2.54 0) (length 5.08)+ (pin bidirectional line (at -17.78 -7.62 0) (length 5.08) (name "PA5" (effects (font (size 1.27 1.27)))) (number "11" (effects (font (size 1.27 1.27)))) )- (pin bidirectional line (at -17.78 -5.08 0) (length 5.08)+ (pin bidirectional line (at -17.78 -10.16 0) (length 5.08) (name "PA6" (effects (font (size 1.27 1.27)))) (number "12" (effects (font (size 1.27 1.27)))) )- (pin bidirectional line (at -17.78 -7.62 0) (length 5.08)+ (pin bidirectional line (at -17.78 -12.70 0) (length 5.08) (name "PA7" (effects (font (size 1.27 1.27)))) (number "13" (effects (font (size 1.27 1.27)))) )- (pin bidirectional line (at -17.78 -10.16 0) (length 5.08)+ (pin bidirectional line (at -17.78 -15.24 0) (length 5.08)+ (name "PB0" (effects (font (size 1.27 1.27))))+ (number "14" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at -17.78 -17.78 0) (length 5.08) (name "PB1" (effects (font (size 1.27 1.27)))) (number "15" (effects (font (size 1.27 1.27)))) )- (pin power_in line (at -17.78 -12.70 0) (length 5.08)+ (pin power_in line (at -17.78 -20.32 0) (length 5.08) (name "VSS" (effects (font (size 1.27 1.27)))) (number "16" (effects (font (size 1.27 1.27)))) )- (pin power_in line (at -17.78 -15.24 0) (length 5.08)- (name "VDD" (effects (font (size 1.27 1.27))))- (number "17" (effects (font (size 1.27 1.27))))- )- (pin bidirectional line (at -17.78 -17.78 0) (length 5.08)- (name "PA8" (effects (font (size 1.27 1.27))))- (number "18" (effects (font (size 1.27 1.27))))- )- (pin bidirectional line (at 17.78 15.24 180) (length 5.08)- (name "PF1" (effects (font (size 1.27 1.27))))+ (pin power_in line (at 17.78 17.78 180) (length 5.08)+ (name "VSS" (effects (font (size 1.27 1.27)))) (number "32" (effects (font (size 1.27 1.27)))) )- (pin bidirectional line (at 17.78 12.70 180) (length 5.08)- (name "PF0" (effects (font (size 1.27 1.27))))+ (pin input line (at 17.78 15.24 180) (length 5.08)+ (name "BOOT0" (effects (font (size 1.27 1.27)))) (number "31" (effects (font (size 1.27 1.27)))) )- (pin bidirectional line (at 17.78 10.16 180) (length 5.08)+ (pin bidirectional line (at 17.78 12.70 180) (length 5.08) (name "PB7" (effects (font (size 1.27 1.27)))) (number "30" (effects (font (size 1.27 1.27)))) )- (pin bidirectional line (at 17.78 7.62 180) (length 5.08)+ (pin bidirectional line (at 17.78 10.16 180) (length 5.08) (name "PB6" (effects (font (size 1.27 1.27)))) (number "29" (effects (font (size 1.27 1.27)))) )- (pin bidirectional line (at 17.78 5.08 180) (length 5.08)+ (pin bidirectional line (at 17.78 7.62 180) (length 5.08) (name "PB5" (effects (font (size 1.27 1.27)))) (number "28" (effects (font (size 1.27 1.27)))) )- (pin bidirectional line (at 17.78 2.54 180) (length 5.08)+ (pin bidirectional line (at 17.78 5.08 180) (length 5.08) (name "PB4" (effects (font (size 1.27 1.27)))) (number "27" (effects (font (size 1.27 1.27)))) )- (pin bidirectional line (at 17.78 0.00 180) (length 5.08)+ (pin bidirectional line (at 17.78 2.54 180) (length 5.08) (name "PB3" (effects (font (size 1.27 1.27)))) (number "26" (effects (font (size 1.27 1.27)))) )- (pin bidirectional line (at 17.78 -2.54 180) (length 5.08)+ (pin bidirectional line (at 17.78 0.00 180) (length 5.08) (name "PA15" (effects (font (size 1.27 1.27)))) (number "25" (effects (font (size 1.27 1.27)))) )- (pin bidirectional line (at 17.78 -5.08 180) (length 5.08)+ (pin bidirectional line (at 17.78 -2.54 180) (length 5.08) (name "PA14" (effects (font (size 1.27 1.27)))) (number "24" (effects (font (size 1.27 1.27)))) )- (pin bidirectional line (at 17.78 -7.62 180) (length 5.08)+ (pin bidirectional line (at 17.78 -5.08 180) (length 5.08) (name "PA13" (effects (font (size 1.27 1.27)))) (number "23" (effects (font (size 1.27 1.27)))) )- (pin bidirectional line (at 17.78 -10.16 180) (length 5.08)+ (pin bidirectional line (at 17.78 -7.62 180) (length 5.08) (name "PA12" (effects (font (size 1.27 1.27)))) (number "22" (effects (font (size 1.27 1.27)))) )- (pin bidirectional line (at 17.78 -12.70 180) (length 5.08)+ (pin bidirectional line (at 17.78 -10.16 180) (length 5.08) (name "PA11" (effects (font (size 1.27 1.27)))) (number "21" (effects (font (size 1.27 1.27)))) )- (pin bidirectional line (at 17.78 -15.24 180) (length 5.08)+ (pin bidirectional line (at 17.78 -12.70 180) (length 5.08) (name "PA10" (effects (font (size 1.27 1.27)))) (number "20" (effects (font (size 1.27 1.27)))) )- (pin bidirectional line (at 17.78 -17.78 180) (length 5.08)+ (pin bidirectional line (at 17.78 -15.24 180) (length 5.08) (name "PA9" (effects (font (size 1.27 1.27)))) (number "19" (effects (font (size 1.27 1.27)))) )+ (pin bidirectional line (at 17.78 -17.78 180) (length 5.08)+ (name "PA8" (effects (font (size 1.27 1.27))))+ (number "18" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at 17.78 -20.32 180) (length 5.08)+ (name "VDD" (effects (font (size 1.27 1.27))))+ (number "17" (effects (font (size 1.27 1.27))))+ ) ) ) )
stm32f030k6t6.lbr+58−41@@ -50,7 +50,7 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description></description>+<description>STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-32(7x7). Pinout checked against ST's open pin data</description> <packages> <package name="LQFP-32_7x7mm_P0.8mm"> <description>LQFP-32, 7 x 7 mm, 0.8 mm pitch</description>@@ -112,53 +112,59 @@ </packages> <symbols> <symbol name="STM32F030K6T6">+ <description>STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-32(7x7). Pinout checked against ST's open pin data</description> <wire x1="-12.7" y1="20.32" x2="12.7" y2="20.32" width="0.254" layer="94"/>- <wire x1="12.7" y1="20.32" x2="12.7" y2="-20.32" width="0.254" layer="94"/>- <wire x1="12.7" y1="-20.32" x2="-12.7" y2="-20.32" width="0.254" layer="94"/>- <wire x1="-12.7" y1="-20.32" x2="-12.7" y2="20.32" width="0.254" layer="94"/>+ <wire x1="12.7" y1="20.32" x2="12.7" y2="-22.86" width="0.254" layer="94"/>+ <wire x1="12.7" y1="-22.86" x2="-12.7" y2="-22.86" width="0.254" layer="94"/>+ <wire x1="-12.7" y1="-22.86" x2="-12.7" y2="20.32" width="0.254" layer="94"/> <text x="0.0000" y="22.8600" size="1.27" layer="95" align="center">>NAME</text>- <text x="0.0000" y="-22.8600" size="1.27" layer="96" align="center">>VALUE</text>- <pin name="BOOT0" x="-17.78" y="17.78" length="middle" direction="in"/>- <pin name="NRST" x="-17.78" y="15.24" length="middle" direction="io"/>- <pin name="VDDA" x="-17.78" y="12.7" length="middle" direction="pwr"/>- <pin name="PA0" x="-17.78" y="10.16" length="middle" direction="io"/>- <pin name="PA1" x="-17.78" y="7.62" length="middle" direction="io"/>- <pin name="PA2" x="-17.78" y="5.08" length="middle" direction="io"/>- <pin name="PA3" x="-17.78" y="2.54" length="middle" direction="io"/>- <pin name="PA4" x="-17.78" y="0" length="middle" direction="io"/>- <pin name="PA5" x="-17.78" y="-2.54" length="middle" direction="io"/>- <pin name="PA6" x="-17.78" y="-5.08" length="middle" direction="io"/>- <pin name="PA7" x="-17.78" y="-7.62" length="middle" direction="io"/>- <pin name="PB1" x="-17.78" y="-10.16" length="middle" direction="io"/>- <pin name="VSS" x="-17.78" y="-12.7" length="middle" direction="pwr"/>- <pin name="VDD" x="-17.78" y="-15.24" length="middle" direction="pwr"/>- <pin name="PA8" x="-17.78" y="-17.78" length="middle" direction="io"/>- <pin name="PF1" x="17.78" y="15.24" length="middle" direction="io" rot="R180"/>- <pin name="PF0" x="17.78" y="12.7" length="middle" direction="io" rot="R180"/>- <pin name="PB7" x="17.78" y="10.16" length="middle" direction="io" rot="R180"/>- <pin name="PB6" x="17.78" y="7.62" length="middle" direction="io" rot="R180"/>- <pin name="PB5" x="17.78" y="5.08" length="middle" direction="io" rot="R180"/>- <pin name="PB4" x="17.78" y="2.54" length="middle" direction="io" rot="R180"/>- <pin name="PB3" x="17.78" y="0" length="middle" direction="io" rot="R180"/>- <pin name="PA15" x="17.78" y="-2.54" length="middle" direction="io" rot="R180"/>- <pin name="PA14" x="17.78" y="-5.08" length="middle" direction="io" rot="R180"/>- <pin name="PA13" x="17.78" y="-7.62" length="middle" direction="io" rot="R180"/>- <pin name="PA12" x="17.78" y="-10.16" length="middle" direction="io" rot="R180"/>- <pin name="PA11" x="17.78" y="-12.7" length="middle" direction="io" rot="R180"/>- <pin name="PA10" x="17.78" y="-15.24" length="middle" direction="io" rot="R180"/>- <pin name="PA9" x="17.78" y="-17.78" length="middle" direction="io" rot="R180"/>+ <text x="0.0000" y="-25.4000" size="1.27" layer="96" align="center">>VALUE</text>+ <pin name="VDD" x="-17.78" y="17.78" length="middle" direction="pwr"/>+ <pin name="PF0-OSC_IN" x="-17.78" y="15.24" length="middle" direction="io"/>+ <pin name="PF1-OSC_OUT" x="-17.78" y="12.7" length="middle" direction="io"/>+ <pin name="NRST" x="-17.78" y="10.16" length="middle" direction="in"/>+ <pin name="VDDA" x="-17.78" y="7.62" length="middle" direction="pwr"/>+ <pin name="PA0" x="-17.78" y="5.08" length="middle" direction="io"/>+ <pin name="PA1" x="-17.78" y="2.54" length="middle" direction="io"/>+ <pin name="PA2" x="-17.78" y="0" length="middle" direction="io"/>+ <pin name="PA3" x="-17.78" y="-2.54" length="middle" direction="io"/>+ <pin name="PA4" x="-17.78" y="-5.08" length="middle" direction="io"/>+ <pin name="PA5" x="-17.78" y="-7.62" length="middle" direction="io"/>+ <pin name="PA6" x="-17.78" y="-10.16" length="middle" direction="io"/>+ <pin name="PA7" x="-17.78" y="-12.7" length="middle" direction="io"/>+ <pin name="PB0" x="-17.78" y="-15.24" length="middle" direction="io"/>+ <pin name="PB1" x="-17.78" y="-17.78" length="middle" direction="io"/>+ <pin name="VSS" x="-17.78" y="-20.32" length="middle" direction="pwr"/>+ <pin name="VSS@2" x="17.78" y="17.78" length="middle" direction="pwr" rot="R180"/>+ <pin name="BOOT0" x="17.78" y="15.24" length="middle" direction="in" rot="R180"/>+ <pin name="PB7" x="17.78" y="12.7" length="middle" direction="io" rot="R180"/>+ <pin name="PB6" x="17.78" y="10.16" length="middle" direction="io" rot="R180"/>+ <pin name="PB5" x="17.78" y="7.62" length="middle" direction="io" rot="R180"/>+ <pin name="PB4" x="17.78" y="5.08" length="middle" direction="io" rot="R180"/>+ <pin name="PB3" x="17.78" y="2.54" length="middle" direction="io" rot="R180"/>+ <pin name="PA15" x="17.78" y="0" length="middle" direction="io" rot="R180"/>+ <pin name="PA14" x="17.78" y="-2.54" length="middle" direction="io" rot="R180"/>+ <pin name="PA13" x="17.78" y="-5.08" length="middle" direction="io" rot="R180"/>+ <pin name="PA12" x="17.78" y="-7.62" length="middle" direction="io" rot="R180"/>+ <pin name="PA11" x="17.78" y="-10.16" length="middle" direction="io" rot="R180"/>+ <pin name="PA10" x="17.78" y="-12.7" length="middle" direction="io" rot="R180"/>+ <pin name="PA9" x="17.78" y="-15.24" length="middle" direction="io" rot="R180"/>+ <pin name="PA8" x="17.78" y="-17.78" length="middle" direction="io" rot="R180"/>+ <pin name="VDD@2" x="17.78" y="-20.32" length="middle" direction="pwr" rot="R180"/> </symbol> </symbols> <devicesets> <deviceset name="STM32F030K6T6" prefix="U">- <description></description>+ <description>STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-32(7x7). Pinout checked against ST's open pin data</description> <gates> <gate name="G$1" symbol="STM32F030K6T6" x="0" y="0"/> </gates> <devices> <device name="" package="LQFP-32_7x7mm_P0.8mm"> <connects>- <connect gate="G$1" pin="BOOT0" pad="1"/>+ <connect gate="G$1" pin="VDD" pad="1"/>+ <connect gate="G$1" pin="PF0-OSC_IN" pad="2"/>+ <connect gate="G$1" pin="PF1-OSC_OUT" pad="3"/> <connect gate="G$1" pin="NRST" pad="4"/> <connect gate="G$1" pin="VDDA" pad="5"/> <connect gate="G$1" pin="PA0" pad="6"/>@@ -169,12 +175,11 @@ <connect gate="G$1" pin="PA5" pad="11"/> <connect gate="G$1" pin="PA6" pad="12"/> <connect gate="G$1" pin="PA7" pad="13"/>+ <connect gate="G$1" pin="PB0" pad="14"/> <connect gate="G$1" pin="PB1" pad="15"/> <connect gate="G$1" pin="VSS" pad="16"/>- <connect gate="G$1" pin="VDD" pad="17"/>- <connect gate="G$1" pin="PA8" pad="18"/>- <connect gate="G$1" pin="PF1" pad="32"/>- <connect gate="G$1" pin="PF0" pad="31"/>+ <connect gate="G$1" pin="VSS@2" pad="32"/>+ <connect gate="G$1" pin="BOOT0" pad="31"/> <connect gate="G$1" pin="PB7" pad="30"/> <connect gate="G$1" pin="PB6" pad="29"/> <connect gate="G$1" pin="PB5" pad="28"/>@@ -187,8 +192,20 @@ <connect gate="G$1" pin="PA11" pad="21"/> <connect gate="G$1" pin="PA10" pad="20"/> <connect gate="G$1" pin="PA9" pad="19"/>+ <connect gate="G$1" pin="PA8" pad="18"/>+ <connect gate="G$1" pin="VDD@2" pad="17"/> </connects>- <technologies><technology name=""/></technologies>+ <technologies>+ <technology name="">+ <attribute name="MPN" value="STM32F030K6T6" constant="no"/>+ <attribute name="MANUFACTURER" value="STMicroelectronics" constant="no"/>+ <attribute name="DATASHEET" value="https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586176393625812992" constant="no"/>+ <attribute name="ADOM_WIKI" value="https://wiki.adom.inc/adom/stm32f030k6t6" constant="no"/>+ <attribute name="MOUSER_PN" value="511-STM32F030K6T6" constant="no"/>+ <attribute name="DIGIKEY_PN" value="497-14046-ND" constant="no"/>+ <attribute name="LCSC_PN" value="C46830" constant="no"/>+ </technology>+ </technologies> </device> </devices> </deviceset>