STM32F030C8T6

@@ -0,0 +1,93 @@+# STM32F030C8++**STMicroelectronics** · 32-bit Arm Cortex-M0 MCU · LQFP-48++The value-line member of ST's STM32F0 family, a 32-bit Arm Cortex-M0 microcontroller in LQFP-48 that undercuts most 8-bit parts on price while giving you a real 32-bit core. It runs at up to 48 MHz with 64 KB of flash and 8 KB of SRAM, and the 48-pin package brings out up to 39 GPIO across ports A/B/C/D/F, a 12-bit ADC, timers with PWM, and hardware USART, SPI, and I2C. It boots from an internal 8 MHz oscillator (no crystal required) and programs over SWD (SWDIO/SWCLK on PA13/PA14). A common jump from the STM8 or an 8-bit AVR when a project needs more headroom. Datasheet-verified 48-pin pinout.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VDD | power_in | Digital / complementary power supply pin. Operating range 2.4 V-3.6 V. Decouple with 100 nF + shared 4.7 µF on the VDD/VSS pair. |+| 2 | PC13 | bidirectional | General-purpose I/O (TC, standard 3.3 V). Additional functions: RTC_TAMP1, RTC_TS, RTC_OUT, WKUP2. Powered through the LSE/RTC power switch - limit output speed to 2 MHz / 30 pF and do not use as a current source. |+| 3 | PC14/OSC32_IN | bidirectional | General-purpose I/O (TC) that alternately serves as the OSC32_IN pin for the LSE (32.768 kHz) crystal. Same 3 mA supply-switch limit as PC13. |+| 4 | PC15/OSC32_OUT | bidirectional | General-purpose I/O (TC) that alternately serves as the OSC32_OUT pin for the LSE (32.768 kHz) crystal. Same 3 mA supply-switch limit as PC13. |+| 5 | PF0/OSC_IN | bidirectional | General-purpose 5 V-tolerant I/O (FT). Alternate functions: I2C1_SDA. Additional function: OSC_IN (HSE crystal input, 4-32 MHz). |+| 6 | PF1/OSC_OUT | bidirectional | General-purpose 5 V-tolerant I/O (FT). Alternate functions: I2C1_SCL. Additional function: OSC_OUT (HSE crystal output). |+| 7 | NRST | bidirectional | Device reset input / internal reset output, active low. Has an embedded weak pull-up (RST structure). |+| 8 | VSSA | power_in | Analog ground reference for the ADC and other analog blocks. Star-tie to digital VSS at the device. |+| 9 | VDDA | power_in | Analog power supply (2.4 V-3.6 V, must be ≥ VDD − 0.4 V). Decouple with 10 nF + 1 µF between VDDA and VSSA. |+| 10 | PA0 | bidirectional | General-purpose I/O (TTa, 3.3 V, ADC-capable). Alternate: USART1_CTS / USART2_CTS / USART4_TX. Additional: ADC_IN0, RTC_TAMP2, WKUP1. |+| 11 | PA1 | bidirectional | General-purpose I/O (TTa, 3.3 V, ADC-capable). Alternate: EVENTOUT / USART1_RTS / USART2_RTS / USART4_RX / TIM15_CH1N. Additional: ADC_IN1. |+| 12 | PA2 | bidirectional | General-purpose I/O (TTa, 3.3 V, ADC-capable). Alternate: USART1_TX / USART2_TX / TIM15_CH1. Additional: ADC_IN2, WKUP4. |+| 13 | PA3 | bidirectional | General-purpose I/O (TTa, 3.3 V, ADC-capable). Alternate: USART1_RX / USART2_RX / TIM15_CH2. Additional: ADC_IN3. |+| 14 | PA4 | bidirectional | General-purpose I/O (TTa, 3.3 V, ADC-capable). Alternate: SPI1_NSS / USART1_CK / USART2_CK / TIM14_CH1 / USART6_TX. Additional: ADC_IN4. |+| 15 | PA5 | bidirectional | General-purpose I/O (TTa, 3.3 V, ADC-capable). Alternate: SPI1_SCK / USART6_RX. Additional: ADC_IN5. |+| 16 | PA6 | bidirectional | General-purpose I/O (TTa, 3.3 V, ADC-capable). Alternate: SPI1_MISO / TIM3_CH1 / TIM1_BKIN / TIM16_CH1 / EVENTOUT / USART3_CTS. Additional: ADC_IN6. |+| 17 | PA7 | bidirectional | General-purpose I/O (TTa, 3.3 V, ADC-capable). Alternate: SPI1_MOSI / TIM3_CH2 / TIM14_CH1 / TIM1_CH1N / TIM17_CH1 / EVENTOUT. Additional: ADC_IN7. |+| 18 | PB0 | bidirectional | General-purpose I/O (TTa, 3.3 V, ADC-capable). Alternate: TIM3_CH3 / TIM1_CH2N / EVENTOUT / USART3_CK. Additional: ADC_IN8. |+| 19 | PB1 | bidirectional | General-purpose I/O (TTa, 3.3 V, ADC-capable). Alternate: TIM3_CH4 / TIM14_CH1 / TIM1_CH3N / USART3_RTS. Additional: ADC_IN9. |+| 20 | PB2 | bidirectional | General-purpose 5 V-tolerant I/O (FT). No alternate or additional functions listed. |+| 21 | PB10 | bidirectional | General-purpose 5 V-tolerant I/O (FT). Alternate: SPI2_SCK / I2C1_SCL / I2C2_SCL / USART3_TX. |+| 22 | PB11 | bidirectional | General-purpose 5 V-tolerant I/O (FT). Alternate: I2C1_SDA / I2C2_SDA / EVENTOUT / USART3_RX. |+| 23 | VSS | power_in | Digital ground return. Pair with the adjacent VDD pin and decouple with 100 nF. |+| 24 | VDD | power_in | Digital power supply pin (2.4 V-3.6 V). Decouple with 100 nF close to the package. |+| 25 | PB12 | bidirectional | General-purpose 5 V-tolerant I/O (FT). Alternate: SPI1_NSS / SPI2_NSS / TIM1_BKIN / EVENTOUT / USART3_CK. |+| 26 | PB13 | bidirectional | General-purpose 5 V-tolerant I/O (FT). Alternate: SPI1_SCK / SPI2_SCK / I2C2_SCL / TIM1_CH1N / USART3_CTS. |+| 27 | PB14 | bidirectional | General-purpose 5 V-tolerant I/O (FT). Alternate: SPI1_MISO / SPI2_MISO / I2C2_SDA / TIM1_CH2N / TIM15_CH1 / USART3_RTS. |+| 28 | PB15 | bidirectional | General-purpose 5 V-tolerant I/O (FT). Alternate: SPI1_MOSI / SPI2_MOSI / TIM1_CH3N / TIM15_CH1N / TIM15_CH2. Additional: RTC_REFIN, WKUP7. |+| 29 | PA8 | bidirectional | General-purpose 5 V-tolerant I/O (FT). Alternate: USART1_CK / TIM1_CH1 / EVENTOUT / MCO (microcontroller clock output). |+| 30 | PA9 | bidirectional | General-purpose 5 V-tolerant I/O (FT). Alternate: USART1_TX / TIM1_CH2 / TIM15_BKIN / I2C1_SCL. |+| 31 | PA10 | bidirectional | General-purpose 5 V-tolerant I/O (FT). Alternate: USART1_RX / TIM1_CH3 / TIM17_BKIN / I2C1_SDA. |+| 32 | PA11 | bidirectional | General-purpose 5 V-tolerant I/O (FT). Alternate: USART1_CTS / TIM1_CH4 / EVENTOUT / I2C2_SCL. |+| 33 | PA12 | bidirectional | General-purpose 5 V-tolerant I/O (FT). Alternate: USART1_RTS / TIM1_ETR / EVENTOUT / I2C2_SDA. |+| 34 | PA13/SWDIO | bidirectional | General-purpose 5 V-tolerant I/O (FT). Default after reset is SWDIO (with internal pull-up). Alternate: IR_OUT. |+| 35 | PF6 | bidirectional | General-purpose 5 V-tolerant I/O (FT) present on STM32F030x4/6/8. Alternate: I2C1_SCL / I2C2_SCL. |+| 36 | PF7 | bidirectional | General-purpose 5 V-tolerant I/O (FT) present on STM32F030x4/6/8. Alternate: I2C1_SDA / I2C2_SDA. |+| 37 | PA14/SWCLK | bidirectional | General-purpose 5 V-tolerant I/O (FT). Default after reset is SWCLK (with internal pull-down). Alternate: USART1_TX / USART2_TX. |+| 38 | PA15 | bidirectional | General-purpose 5 V-tolerant I/O (FT). Alternate: SPI1_NSS / USART1_RX / USART2_RX / USART4_RTS / EVENTOUT. |+| 39 | PB3 | bidirectional | General-purpose 5 V-tolerant I/O (FT). Alternate: SPI1_SCK / EVENTOUT / USART5_TX. |+| 40 | PB4 | bidirectional | General-purpose 5 V-tolerant I/O (FT). Alternate: SPI1_MISO / TIM3_CH1 / EVENTOUT / TIM17_BKIN / USART5_RX. |+| 41 | PB5 | bidirectional | General-purpose 5 V-tolerant I/O (FT). Alternate: SPI1_MOSI / I2C1_SMBA / TIM16_BKIN / TIM3_CH2 / USART5_CK_RTS. Additional: WKUP6. |+| 42 | PB6 | bidirectional | General-purpose 5 V-tolerant Fm+-capable I/O (FTf). Alternate: I2C1_SCL / USART1_TX / TIM16_CH1N. |+| 43 | PB7 | bidirectional | General-purpose 5 V-tolerant Fm+-capable I/O (FTf). Alternate: I2C1_SDA / USART1_RX / TIM17_CH1N / USART4_CTS. |+| 44 | BOOT0 | input | Boot memory selection input (dedicated B structure). Sampled at reset with the nBOOT1 option bit to choose between main Flash, system memory (bootloader), or embedded SRAM. |+| 45 | PB8 | bidirectional | General-purpose 5 V-tolerant Fm+-capable I/O (FTf). Alternate: I2C1_SCL / TIM16_CH1. |+| 46 | PB9 | bidirectional | General-purpose 5 V-tolerant Fm+-capable I/O (FTf). Alternate: I2C1_SDA / IR_OUT / SPI2_NSS / TIM17_CH1 / EVENTOUT. |+| 47 | VSS | power_in | Digital ground return. Pair with the adjacent VDD pin and decouple with 100 nF. |+| 48 | VDD | power_in | Digital power supply pin (2.4 V-3.6 V). Decouple with 100 nF close to the package. |++## Key specifications++| Parameter | Value |+|---|---|+| Core | 32-bit Arm Cortex-M0 |+| Max clock | 48 MHz |+| Flash | 64 KB |+| SRAM | 8 KB |+| GPIO | up to 39 (ports A-F) |+| ADC | 12-bit (up to 16 ch) |+| Serial | USART + SPI + I2C |+| Supply voltage | 2.4-3.6 V |+| Package | LQFP-48 (7x7 mm) |++## Ordering variants++- `STM32F030C8T6 (LQFP-48)`+- `STM32F030C6T6 (LQFP-48, 32 KB)`++## CAD (KiCad official)++- Symbol: `MCU_ST_STM32F0:STM32F030C8Tx`+- Footprint: `Package_QFP:LQFP-48_7x7mm_P0.5mm`+- 3D model: LQFP-48 (KiCad packages3D)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://www.st.com/resource/en/datasheet/stm32f030c8.pdf) (25 pp, sha256 `8e0f78fa4556da96`, retrieved 2026-08-17, tier: manufacturer)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm32f030c8-datasheet.pdf)