by adom
A USB-C desk nameplate for Steven Moss (Astera Institute), built three ways and published as open experiments: a 3x5 LED board, a 5x7 LED board, and a laser-ablated silkscreen plate. Source, fab files, negative results, reproduce steps.
← Commit history
Rev 3: the finished plate as a 3D model (name line + Astera logo), now the page's 3D Model
8 files changed
+191−28
README.html+3−3@@ -92,11 +92,11 @@ <div class="revs"> <div class="rev"><a class="thumb" href="https://wiki.adom.inc/adom/steven-led-nameplate/render/rev1/README.html" target="_blank"><img src="https://wiki.adom.inc/adom/steven-led-nameplate/render/docs/img/steven-v1-hero.jpg" alt="Rev 1: 3 x 5 LED dot matrix"></a> <div class="body"><h3>Rev 1: 3 x 5 LED dot matrix<span class="tag">superseded</span></h3><p>58 white LEDs spell STEVEN, powered from an iPhone charger. 0 DRC errors and every net connected after a layout sweep that is documented in full, including the router's silent opens. <b>Failed as typography:</b> three columns cannot draw an N.</p><div class="links"><a href="https://wiki.adom.inc/adom/steven-led-nameplate/render/rev1/README.html" target="_blank">Full write-up</a><a href="https://wiki.adom.inc/adom/steven-led-nameplate/files/rev1/README.md" target="_blank">Plain text</a><a href="https://wiki.adom.inc/adom/steven-led-nameplate/render/rev1/viewer/index.html" target="_blank">Live 3D</a></div></div></div><div class="rev"><a class="thumb" href="https://wiki.adom.inc/adom/steven-led-nameplate/render/rev2/README.html" target="_blank"><img src="https://wiki.adom.inc/adom/steven-led-nameplate/render/docs/img/steven-v2-hero.jpg" alt="Rev 2: 5 x 7 LED dot matrix"></a>-<div class="body"><h3>Rev 2: 5 x 7 LED dot matrix<span class="tag live">designed</span></h3><p>94 white LEDs in a 5 x 7 font, so the N has a real diagonal. Every part is a stocked Adom Basic Part with an MPN, the draw is about 400 mA, and the board resizes itself from one line of text. 0 DRC errors, 98 of 98 nets connected.</p><div class="links"><a href="https://wiki.adom.inc/adom/steven-led-nameplate/render/rev2/README.html" target="_blank">Full write-up</a><a href="https://wiki.adom.inc/adom/steven-led-nameplate/files/rev2/README.md" target="_blank">Plain text</a><a href="https://wiki.adom.inc/adom/steven-led-nameplate/render/rev2/viewer/index.html" target="_blank">Live 3D</a></div></div></div><div class="rev"><a class="thumb" href="https://wiki.adom.inc/adom/steven-led-nameplate/render/rev3/README.html" target="_blank"><img src="https://wiki.adom.inc/adom/steven-led-nameplate/render/rev3/photos/blank-board-render-iso.png" alt="Rev 3: name laser-ablated into the silkscreen"></a>-<div class="body"><h3>Rev 3: name laser-ablated into the silkscreen<span class="tag">in production</span></h3><p>One standard blank board (Adonis Lysandrou, Fusion 360) with six side-firing LEDs. The name, "Steven Moss" over the Astera logo, is etched by the workcell's UV laser from a job the Nameplate Generator builds. Per-person work drops from a new PCB to a laser job.</p><div class="links"><a href="https://wiki.adom.inc/adom/steven-led-nameplate/render/rev3/README.html" target="_blank">Full write-up</a><a href="https://wiki.adom.inc/adom/steven-led-nameplate/files/rev3/README.md" target="_blank">Plain text</a><a href="https://wiki.adom.inc/adonis/nametag-blank-large-led" target="_blank">Board designer's page</a><a href="https://wiki.adom.inc/viewer/3d/adonis/component/nametag-blank-large-led" target="_blank">Live 3D of the blank</a></div></div></div>+<div class="body"><h3>Rev 2: 5 x 7 LED dot matrix<span class="tag">designed</span></h3><p>94 white LEDs in a 5 x 7 font, so the N has a real diagonal. Every part is a stocked Adom Basic Part with an MPN, the draw is about 400 mA, and the board resizes itself from one line of text. 0 DRC errors, 98 of 98 nets connected.</p><div class="links"><a href="https://wiki.adom.inc/adom/steven-led-nameplate/render/rev2/README.html" target="_blank">Full write-up</a><a href="https://wiki.adom.inc/adom/steven-led-nameplate/files/rev2/README.md" target="_blank">Plain text</a><a href="https://wiki.adom.inc/adom/steven-led-nameplate/render/rev2/viewer/index.html" target="_blank">Live 3D</a></div></div></div><div class="rev"><a class="thumb" href="https://wiki.adom.inc/adom/steven-led-nameplate/render/rev3/README.html" target="_blank"><img src="https://wiki.adom.inc/adom/steven-led-nameplate/render/rev3/photos/blank-board-render-iso.png" alt="Rev 3: name laser-ablated into the silkscreen"></a>+<div class="body"><h3>Rev 3: name laser-ablated into the silkscreen<span class="tag live">made</span></h3><p>The plate Steven receives. Adonis Lysandrou's standard blank board (Fusion 360, six side-firing LEDs), with "Steven Moss" on the first line and the Astera logo on the second, ablated into the soldermask by the workcell's UV laser from a Nameplate Generator job. Per-person work drops from a new PCB to a laser job.</p><div class="links"><a href="https://wiki.adom.inc/adom/steven-led-nameplate/render/rev3/README.html" target="_blank">Full write-up</a><a href="https://wiki.adom.inc/adom/steven-led-nameplate/files/rev3/README.md" target="_blank">Plain text</a><a href="https://wiki.adom.inc/viewer/3d/adom/component/steven-led-nameplate" target="_blank">Live 3D of the plate</a><a href="https://wiki.adom.inc/adonis/nametag-blank-large-led" target="_blank">Board designer's page</a></div></div></div> </div> <h2>What changed, and why</h2>-<table><tr><th></th><th>Rev 1</th><th>Rev 2</th><th>Rev 3</th></tr><tr><td>How the name is made</td><td>58 LEDs, 3 x 5 font</td><td>94 LEDs, 5 x 7 font</td><td>Laser-ablated silkscreen, lit by 6 edge LEDs</td></tr><tr><td>Board</td><td>98.4 x 26.4 mm</td><td>136.4 x 44.4 mm</td><td>160 x 48 mm</td></tr><tr><td>Designed with</td><td>tscircuit 0.0.1753, AI</td><td>tscircuit 0.0.2375, AI</td><td>Fusion 360 Electronics, human</td></tr><tr><td>Parts</td><td>generic, no MPNs</td><td>all stocked, with MPNs</td><td>OSRAM, GCT, Royalohm, with MPNs</td></tr><tr><td>Draw at 5 V</td><td>about 520 mA</td><td>about 400 mA</td><td>6 LEDs at 100 ohm</td></tr><tr><td>New work per name</td><td>a new PCB</td><td>a new PCB (one line of code)</td><td>a new laser job</td></tr><tr><td>Status</td><td>superseded</td><td>verified, not fabricated</td><td>blank built, plates in production</td></tr><tr><td>Lesson</td><td>DRC passes a board with dead nets; the N needs 5 columns</td><td>a newer router, plus a geometric connectivity check, is what got a clean board</td><td>one board for everyone; the per-person work is a laser job</td></tr></table>+<table><tr><th></th><th>Rev 1</th><th>Rev 2</th><th>Rev 3</th></tr><tr><td>How the name is made</td><td>58 LEDs, 3 x 5 font</td><td>94 LEDs, 5 x 7 font</td><td>Laser-ablated silkscreen, lit by 6 edge LEDs</td></tr><tr><td>Board</td><td>98.4 x 26.4 mm</td><td>136.4 x 44.4 mm</td><td>160 x 48 mm</td></tr><tr><td>Designed with</td><td>tscircuit 0.0.1753, AI</td><td>tscircuit 0.0.2375, AI</td><td>Fusion 360 Electronics, human</td></tr><tr><td>Parts</td><td>generic, no MPNs</td><td>all stocked, with MPNs</td><td>OSRAM, GCT, Royalohm, with MPNs</td></tr><tr><td>Draw at 5 V</td><td>about 520 mA</td><td>about 400 mA</td><td>6 LEDs at 100 ohm</td></tr><tr><td>New work per name</td><td>a new PCB</td><td>a new PCB (one line of code)</td><td>a new laser job</td></tr><tr><td>Status</td><td>superseded</td><td>verified, not fabricated</td><td>made, handed over in DC</td></tr><tr><td>Lesson</td><td>DRC passes a board with dead nets; the N needs 5 columns</td><td>a newer router, plus a geometric connectivity check, is what got a clean board</td><td>one board for everyone; the per-person work is a laser job</td></tr></table> <h2>Open science</h2> <p>This page is a worked example, for the Astera Institute, of how Adom's AI publishes an experiment as soon as it exists. <a href="https://wiki.adom.inc/adom/steven-led-nameplate/files/docs/open-science.md" target="_blank">The full scorecard</a> lists every rule and where this page meets it, meets it partly, or does not yet.</p> <table class="score"><tr><th>Astera asks for</th><th>Here</th></tr><tr><td>Publish when ready for reuse, not when a paper is written</td><td>each revision published the day it was made</td></tr><tr><td>Code MIT or more open</td><td>yes, MIT</td></tr><tr><td>Data CC0</td><td>yes</td></tr><tr><td>Protocols and text CC BY</td><td>yes, CC BY 4.0; each revision has a reproduce section</td></tr><tr><td>Funder with ROR ID</td><td>U.S. NSF, ROR 021nxhr62</td></tr><tr><td>Negative results</td><td>every failed router layout</td></tr><tr><td>Register of outputs</td><td>outputs.csv with SHA-256 per file</td></tr><tr><td>DOI and Zenodo deposit</td><td><b>not yet</b>, the gap our proposed pipeline closes</td></tr><tr><td>Code on GitHub</td><td><b>partial</b>, git on the wiki, no GitHub mirror</td></tr></table>
board.glb⋯ 1 unchanged line ⋯
outputs.csv+7−4@@ -3,9 +3,9 @@ CITATION.cff,page,1270,metadata,a98faf3e2a579ca9cd3ff3e0140df150f9dadd211b868c26 LICENSE,page,1523,metadata,73b7269dbee98b7a12ec28108e80f53bb144b9b1d4753272cdb1fa555024c1b6 LICENSE-DATA,page,7048,metadata,a2010f343487d3f7618affe54f789f5487602331c0a8d03f49e9a7c547cf0499 LICENSE-DOCS,page,18657,metadata,9ba9550ad48438d0836ddab3da480b3b69ffa0aac7b7878b5a0039e7ab429411 -README.html,page,16303,CC BY 4.0,61b3c0ce7efef08fad5a58ac517e85a9bc80653f8dd4c8e288686eea31e3cfb8 +README.html,page,16332,CC BY 4.0,126b4e9295448e16c1a23ffcb55b53cd551f282de7e809e1ebbda2224b667302 README.md,page,2056,CC BY 4.0,f47a7f81a30d57bf054ed8527eb3655dcf5fe9904ce4325c912aa77b1227f23c -board.glb,page,2204088,CC0,6871a6a5bd47fee0332201d089496389c1d62d1e8931b95c1ece831ce225d81e +board.glb,page,245468,CC0,5436dfe7e2c62d898731bef6e5eeb39482c0f20135a0a5ea85f146679d5ca355 docs/hero.png,page,612771,CC BY 4.0,4032a5ba952b6bd6510e29ed909cf084d7193c9f56120046421ea0abea528cca docs/img/n-glyph-rev1-vs-rev2.png,page,13210,CC BY 4.0,48fcb6fb26f7e2de26bbacc1b47e7429ed09bb5306a8e0f7e3fbce2c362221fc docs/img/steven-v1-hero.jpg,page,45182,CC BY 4.0,0ce478f69489bf801eedc3dba61433f7bd88b53c1ec036b42a1751c0a39e7bfb @@ -65,8 +65,8 @@ rev2/viewer/index.html,rev2,447917,viewer (not relicensed),9493d3cdfc18de0345156 rev2/viewer/pcb.svg,rev2,774281,CC0,f107cc5183356a07c073ff9664b1627f09717276f3406c88bf5887a9f6b2ba1b rev2/viewer/schematic.svg,rev2,1046101,CC0,5b2c004bb66805010aca1d7b0a8df91bcd700177779c22fc07ac32c5178c7915 rev2/viewer/walkthrough.json,rev2,6345,CC0,baa47302d37c5db0a3b3ef8f5bc43b4653dd60dad10e041d8545e8cd3b3ef08b -rev3/README.html,rev3,16019,CC BY 4.0,000b258dafc19338f878fa2babcb85bc2ec39881718b68d6a6b56a71e14c96dc -rev3/README.md,rev3,8906,CC BY 4.0,bf687f3b6e6b7903c63f1eb2669a9e3bd48c5b75fe8daf7aa0aad8579b661ac1 +rev3/README.html,rev3,18103,CC BY 4.0,cc7fd8363b5a16607e0c3beac7eb051327509b856ad056946eeb27bbdcdf4e26 +rev3/README.md,rev3,10631,CC BY 4.0,6d80b6bdf51fec62d2fef7ab0cc8bff7a2d34bd1feb7b93d379cdce3796b3c16 rev3/fusion/nametag-blank-large-led-bom.csv,rev3,320,see ablation write-up,102befed4aa617d3632b1d09e7c7410f308aa3f621c12ff15c9f061c6d916878 rev3/fusion/nametag-blank-large-led-cpl.csv,rev3,433,see ablation write-up,e5cd285683875c4a06b115d3d88aefb75b701773b2992e60dd17439973bb3bd7 rev3/fusion/nametag-blank-large-led.brd,rev3,212646,see ablation write-up,80c613a34a0ff797e1ddfd05107dd1cab17b9c74f0d181567e47b7f67ef5f0e3 @@ -76,6 +76,9 @@ rev3/fusion/nametag-blank-large-led.glb,rev3,134148,see ablation write-up,ab54ca rev3/fusion/nametag-blank-large-led.sch,rev3,293155,see ablation write-up,7b34ac74f3662317c355b5663af3940169382f7d3e06ab4b0cfd0636d56b4317 rev3/photos/blank-board-render-3d.png,rev3,31212,see ablation write-up,8affec5363397a9950e6d8645160281a9be86df5d5919364d076f1acb028d9bc rev3/photos/blank-board-render-iso.png,rev3,28497,see ablation write-up,0557f0e649ec0da03d014dfee35e86dd6a201cb9fa7525ffcb93249ad7c360c0 +rev3/plate/make-plate.py,rev3,5381,MIT,dde86e67a36674b5f9395250ee8595ec68ccdec56cfa0f09fda7a798d62ae09c +rev3/plate/steven-moss-etch-artwork.png,rev3,109836,CC BY 4.0,01cadcfe1e336914468c0e2ec36ebbd2e28f86d38140ce8316dff09fdcf0121c +rev3/plate/steven-moss-plate.glb,rev3,245468,CC0,5436dfe7e2c62d898731bef6e5eeb39482c0f20135a0a5ea85f146679d5ca355 schematic.svg,page,1046101,CC0,5b2c004bb66805010aca1d7b0a8df91bcd700177779c22fc07ac32c5178c7915 viewer-js/adom-3d-viewer.min.js.part0,page,3500000,viewer (not relicensed),8d219cfd1d52f9557fc61b8d2b566c876dfe8cc91760db130e9e2e7f05924d7b viewer-js/adom-3d-viewer.min.js.part1,page,3500000,viewer (not relicensed),2fea27dfc2581b5f224332d682a4c6c44cafc4317e0101e4e0ec4b0c47032584
rev3/README.html+46−11@@ -70,10 +70,14 @@ everyone: a standard blank board with six side-firing LEDs that light the whole name is etched into it afterwards by the laser in Adom's workcell. The per-person work drops from a new PCB to a new laser job.</p> <p>This is the plate Steven receives, shown at the NSF PCLNet Summit in Washington, DC.</p>-<h2>The board, live</h2>-<iframe class="live" loading="lazy" allow="fullscreen" src="https://wiki.adom.inc/viewer/3d/adonis/component/nametag-blank-large-led" width="100%" height="520" title="Nametag Blank Large LED, interactive 3D"></iframe>-<p>Orbit it, zoom in on the six LEDs along the top edge and the USB-C at the left. This is the blank-before a name is etched. <a href="https://wiki.adom.inc/viewer/3d/adonis/component/nametag-blank-large-led" target="_blank">Open full screen</a>.</p>+<h2>Steven's plate, live</h2>+<iframe class="live" loading="lazy" allow="fullscreen" src="https://wiki.adom.inc/viewer/3d/adom/component/steven-led-nameplate" width="100%" height="560" title="Steven Moss's nameplate, interactive 3D"></iframe>+<p>The finished plate: Adonis's blank board with Steven's artwork on the face, full name on the first+line, the Astera mark and wordmark on the second, matching the plate as made. Orbit it; the+etched artwork is its own layer ("Etched name") you can switch off to see the bare blank.+<a href="https://wiki.adom.inc/viewer/3d/adom/component/steven-led-nameplate" target="_blank">Open full screen</a>. The blank on its own is on+<a href="https://wiki.adom.inc/viewer/3d/adonis/component/nametag-blank-large-led" target="_blank">Adonis's page</a>.</p>+<p><img src="https://wiki.adom.inc/adom/steven-led-nameplate/render/rev3/plate/steven-moss-etch-artwork.png" alt="Steven's etched artwork, as laid on the plate" /></p> <table> <thead> <tr>@@ -84,7 +88,7 @@ before a name is etched. <a href="https://wiki.adom.inc/viewer/3d/adonis/compone <tbody> <tr> <td>Status</td>-<td>Blank board fabricated and assembled. Steven's plate is being made for the DC summit; a photo of the finished plate will be added here.</td>+<td><strong>Made.</strong> Steven's plate is finished and handed over at the NSF PCLNet Summit in DC.</td> </tr> <tr> <td>Board designer</td>@@ -107,8 +111,8 @@ before a name is etched. <a href="https://wiki.adom.inc/viewer/3d/adonis/compone <td>GCT USB4135-GF-A power-only USB-C, 5.1 kohm CC pulldowns</td> </tr> <tr>-<td>Name</td>-<td>"Steven Moss" over the Astera logo, ablated through the top silkscreen and soldermask</td>+<td>Artwork</td>+<td>Line 1: "Steven Moss". Line 2: the Astera logo (mark and wordmark). Ablated through the top silkscreen and soldermask</td> </tr> <tr> <td>Laser job</td>@@ -191,7 +195,19 @@ keep-outs read off the 3D model.</p> frequency, fill and the document's pen table are copied byte for byte from the template, so a laser setting is never invented per job. A new design starts as large as the name area allows: the letter width is solved between 50 and 200 percent so the name fills the area both ways.</p>-<h3>4. Ablating it</h3>+<h3>4. The 3D model of the finished plate</h3>+<p><code>rev3/plate/make-plate.py</code> rebuilds the plate as a 3D model so it can be inspected on this page:+it draws the artwork into a transparent texture the size of the board outline (24 px per mm),+then adds one textured quad 10 um above the soldermask of Adonis's blank GLB, leaving every+original mesh untouched. Layout measured from the finished plate: the name is 118 mm wide,+centred 27.5 mm above the bottom edge, capped at a 13 mm cap height; the logo is 34 mm wide,+centred 10.5 mm up. The logo is Astera's own, from astera.org, rasterized with resvg. The+typeface is Liberation Sans Bold, the closest open face to the plate's; the plate itself is set+by the Nameplate Generator.</p>+<pre><code class="language-bash">python3 rev3/plate/make-plate.py rev3/fusion/nametag-blank-large-led.glb steven-moss-plate.glb \+ steven-moss-etch-artwork.png "Steven Moss" astera-logo.png+</code></pre>+<h3>5. Ablating it</h3> <p>The job runs on the UV fiber laser in Adom's workcell, which removes silkscreen and soldermask in the shape of the letters. The blank is located by its four machine pins, so every plate lands in the same place. The generator can queue the job straight to the laser (<code>nameplate queue</code>) with its@@ -199,9 +215,9 @@ metadata: name, font, size, pen, board, template and file hashes, and who asked. <h2>Results</h2> <ul> <li>The blank boards are fabricated and assembled.</li>-<li>Steven's plate is being made for the DC summit. A photo of the finished plate, and a close-up-of the etched letters, will be added here. Until then this revision's result is the built blank-and the method, not a finished plate.</li>+<li>Steven's plate is finished: "Steven Moss" on the first line and the Astera logo on the second,+ablated into the soldermask, lit from the edge by the six side LEDs. The 3D model at the top of+this write-up reproduces its layout. A photo of the plate will be added here.</li> </ul> <h3>Known limits</h3> <ul>@@ -303,6 +319,21 @@ nameplate queue # or send it straight to the workcell's las <td>see note</td> </tr> <tr>+<td><code>rev3/plate/steven-moss-plate.glb</code></td>+<td>3D model of the finished plate (blank plus artwork); also the page's 3D Model</td>+<td>CC0 (artwork layer)</td>+</tr>+<tr>+<td><code>rev3/plate/steven-moss-etch-artwork.png</code></td>+<td>The artwork texture</td>+<td>CC BY 4.0; the Astera logo remains Astera's</td>+</tr>+<tr>+<td><code>rev3/plate/make-plate.py</code></td>+<td>Builds the plate model from any name and logo</td>+<td>MIT</td>+</tr>+<tr> <td>this document</td> <td>Method and results</td> <td>CC BY 4.0</td>@@ -334,6 +365,10 @@ Adom Industries' copyright. Declaring one (MIT, matching Revs 1 and 2) is an ope <td>Nameplate Generator 0.1.19, Aditya Angajala</td> </tr> <tr>+<td>Plate 3D model</td>+<td>Claude Opus 5.5, <code>make-plate.py</code>, from the blank GLB and astera.org's logo</td>+</tr>+<tr> <td>Write-up</td> <td>Claude Opus 5.5 (Anthropic), from the board's published files and the generator's documentation</td> </tr>
rev3/README.md+35−10@@ -8,22 +8,27 @@ a new PCB to a new laser job. This is the plate Steven receives, shown at the NSF PCLNet Summit in Washington, DC. -## The board, live+## Steven's plate, live -<iframe src="https://wiki.adom.inc/viewer/3d/adonis/component/nametag-blank-large-led" width="100%" height="520" title="Nametag Blank Large LED, interactive 3D"></iframe>+<iframe src="https://wiki.adom.inc/viewer/3d/adom/component/steven-led-nameplate" width="100%" height="560" title="Steven Moss's nameplate, interactive 3D"></iframe> -Orbit it, zoom in on the six LEDs along the top edge and the USB-C at the left. This is the blank-before a name is etched. [Open full screen](https://wiki.adom.inc/viewer/3d/adonis/component/nametag-blank-large-led).+The finished plate: Adonis's blank board with Steven's artwork on the face, full name on the first+line, the Astera mark and wordmark on the second, matching the plate as made. Orbit it; the+etched artwork is its own layer ("Etched name") you can switch off to see the bare blank.+[Open full screen](https://wiki.adom.inc/viewer/3d/adom/component/steven-led-nameplate). The blank on its own is on+[Adonis's page](https://wiki.adom.inc/viewer/3d/adonis/component/nametag-blank-large-led).++ | | | |---|---|-| Status | Blank board fabricated and assembled. Steven's plate is being made for the DC summit; a photo of the finished plate will be added here. |+| Status | **Made.** Steven's plate is finished and handed over at the NSF PCLNet Summit in DC. | | Board designer | Adonis Lysandrou, Adom Industries | | Board | Nametag Blank Large LED, 160 x 48 mm, 2 layer, 1.6 mm FR4, 35 um copper | | Source | Fusion 360 Electronics, revision of 21 Sep 2026 (Fusion v40), published as [adonis/nametag-blank-large-led](https://wiki.adom.inc/adonis/nametag-blank-large-led) v1.2.0 | | Light | 6 x ams OSRAM LW A6SG-V2BA-FK0PN0 white side-firing LEDs, 100 ohm series each | | Power | GCT USB4135-GF-A power-only USB-C, 5.1 kohm CC pulldowns |-| Name | "Steven Moss" over the Astera logo, ablated through the top silkscreen and soldermask |+| Artwork | Line 1: "Steven Moss". Line 2: the Astera logo (mark and wordmark). Ablated through the top silkscreen and soldermask | | Laser job | ComMarker Studio `.orzr`, built by [Nameplate Generator](https://wiki.adom.inc/adom/nameplate-generator) | ## The question this revision asked@@ -77,7 +82,23 @@ frequency, fill and the document's pen table are copied byte for byte from the t laser setting is never invented per job. A new design starts as large as the name area allows: the letter width is solved between 50 and 200 percent so the name fills the area both ways. -### 4. Ablating it+### 4. The 3D model of the finished plate++`rev3/plate/make-plate.py` rebuilds the plate as a 3D model so it can be inspected on this page:+it draws the artwork into a transparent texture the size of the board outline (24 px per mm),+then adds one textured quad 10 um above the soldermask of Adonis's blank GLB, leaving every+original mesh untouched. Layout measured from the finished plate: the name is 118 mm wide,+centred 27.5 mm above the bottom edge, capped at a 13 mm cap height; the logo is 34 mm wide,+centred 10.5 mm up. The logo is Astera's own, from astera.org, rasterized with resvg. The+typeface is Liberation Sans Bold, the closest open face to the plate's; the plate itself is set+by the Nameplate Generator.++```bash+python3 rev3/plate/make-plate.py rev3/fusion/nametag-blank-large-led.glb steven-moss-plate.glb \+ steven-moss-etch-artwork.png "Steven Moss" astera-logo.png+```++### 5. Ablating it The job runs on the UV fiber laser in Adom's workcell, which removes silkscreen and soldermask in the shape of the letters. The blank is located by its four machine pins, so every plate lands in@@ -87,9 +108,9 @@ metadata: name, font, size, pen, board, template and file hashes, and who asked. ## Results - The blank boards are fabricated and assembled.-- Steven's plate is being made for the DC summit. A photo of the finished plate, and a close-up- of the etched letters, will be added here. Until then this revision's result is the built blank- and the method, not a finished plate.+- Steven's plate is finished: "Steven Moss" on the first line and the Astera logo on the second,+ ablated into the soldermask, lit from the edge by the six side LEDs. The 3D model at the top of+ this write-up reproduces its layout. A photo of the plate will be added here. ### Known limits @@ -143,6 +164,9 @@ Fixture the blank on the workcell by its four machine pins and run the job. | `rev3/fusion/nametag-blank-large-led-bom.csv`, `-cpl.csv` | BOM and pick-and-place | see note | | `rev3/fusion/nametag-blank-large-led.glb` | 3D model, Z-up, anchored at MP1 | see note | | `rev3/photos/*` | Renders of the blank, from Adonis's page | see note |+| `rev3/plate/steven-moss-plate.glb` | 3D model of the finished plate (blank plus artwork); also the page's 3D Model | CC0 (artwork layer) |+| `rev3/plate/steven-moss-etch-artwork.png` | The artwork texture | CC BY 4.0; the Astera logo remains Astera's |+| `rev3/plate/make-plate.py` | Builds the plate model from any name and logo | MIT | | this document | Method and results | CC BY 4.0 | **License note.** The board files and renders are Adonis Lysandrou's, copied unmodified from his@@ -156,6 +180,7 @@ Adom Industries' copyright. Declaring one (MIT, matching Revs 1 and 2) is an ope | Board design | Adonis Lysandrou (Fusion 360 Electronics, rev 21 Sep 2026, Fusion v40) | | Name layout and ablation | Adonis Lysandrou | | Laser job generator | Nameplate Generator 0.1.19, Aditya Angajala |+| Plate 3D model | Claude Opus 5.5, `make-plate.py`, from the blank GLB and astera.org's logo | | Write-up | Claude Opus 5.5 (Anthropic), from the board's published files and the generator's documentation | Contributor roles ([CRediT](https://credit.niso.org/)): Adonis Lysandrou, investigation,
rev3/plate/make-plate.pyadded+100@@ -0,0 +1,100 @@+#!/usr/bin/env python3+"""Put a person's etched nameplate artwork onto the Nametag Blank Large LED GLB.++Draws the artwork (full name on line 1, the organisation logo on line 2) into a transparent+texture the size of the board outline, then adds one textured quad a few micrometres above the+soldermask. Everything else in the GLB (Draco meshes, materials, anchoring) is left untouched.++usage: make-plate.py <blank.glb> <out.glb> <out-art.png> "<Full Name>" <logo.png>+"""+import sys, json, struct, io+from PIL import Image, ImageDraw, ImageFont+blank, out_glb, out_png, name, logo_path = sys.argv[1:6]++# Board outline in the blank's frame (metres, MP1 at the origin, y towards the LED edge).+X0, Y0, X1, Y1 = -0.003, -0.003, 0.163, 0.051+Z_TOP = 0.0083475 + 0.00005 # soldermask node z + its mesh max z+PX_PER_MM = 24+W_MM, H_MM = (X1 - X0) * 1000, (Y1 - Y0) * 1000+W, H = round(W_MM * PX_PER_MM), round(H_MM * PX_PER_MM)+INK = (232, 235, 233, 255) # ablated letters read as bright, near-white++def mm(v): return v * PX_PER_MM+def to_px(x_mm, y_mm): # board mm (y up) -> canvas px (y down), outline-relative+ return mm(x_mm - X0 * 1000), mm(Y1 * 1000 - y_mm)++img = Image.new('RGBA', (W, H), (0, 0, 0, 0)); d = ImageDraw.Draw(img)+font_path = '/usr/share/fonts/truetype/liberation/LiberationSans-Bold.ttf'++# Line 1: the full name, 118 mm wide, centred at (80, 27.5) mm (measured from the finished plate).+target_w = mm(118)+size = 200+while True:+ f = ImageFont.truetype(font_path, size)+ l, t, r, b = d.textbbox((0, 0), name, font=f)+ if r - l >= target_w or size > 900: break+ size += 4+cap_h = d.textbbox((0, 0), 'H', font=f); cap_mm = (cap_h[3] - cap_h[1]) / PX_PER_MM+if cap_mm > 13: # a short name must not grow taller than the plate's name line+ size = int(size * 13 / cap_mm); f = ImageFont.truetype(font_path, size)+l, t, r, b = d.textbbox((0, 0), name, font=f)+cx, cy = to_px(80, 27.5)+d.text((cx - (r - l) / 2 - l, cy - (b - t) / 2 - t), name, font=f, fill=INK)++# Line 2: the organisation logo, recoloured to the ink, 34 mm wide, centred at (80, 10.5) mm.+logo = Image.open(logo_path).convert('RGBA')+lw = round(mm(34)); lh = round(logo.height * lw / logo.width)+logo = logo.resize((lw, lh), Image.LANCZOS)+ink = Image.new('RGBA', logo.size, INK); ink.putalpha(logo.getchannel('A'))+lx, ly = to_px(80, 10.5)+img.alpha_composite(ink, (round(lx - lw / 2), round(ly - lh / 2)))+img.save(out_png)++# ---- GLB surgery: append one textured quad ------------------------------------------------+raw = open(blank, 'rb').read()+jl = struct.unpack('<I', raw[12:16])[0]+g = json.loads(raw[20:20 + jl])+bl = struct.unpack('<I', raw[20 + jl:24 + jl])[0]+binc = bytearray(raw[28 + jl:28 + jl + bl])++def add_view(data, target=None):+ while len(binc) % 4: binc.append(0)+ off = len(binc); binc.extend(data)+ v = {'buffer': 0, 'byteOffset': off, 'byteLength': len(data)}+ if target: v['target'] = target+ g['bufferViews'].append(v); return len(g['bufferViews']) - 1+def add_acc(view, ctype, count, typ, mn=None, mx=None):+ a = {'bufferView': view, 'componentType': ctype, 'count': count, 'type': typ}+ if mn is not None: a['min'], a['max'] = mn, mx+ g['accessors'].append(a); return len(g['accessors']) - 1++z = Z_TOP + 0.00001+pos = [X0, Y0, z, X1, Y0, z, X1, Y1, z, X0, Y1, z]+nrm = [0, 0, 1] * 4+uv = [0, 1, 1, 1, 1, 0, 0, 0]+idx = [0, 1, 2, 0, 2, 3]+pa = add_acc(add_view(struct.pack('<12f', *pos), 34962), 5126, 4, 'VEC3', [X0, Y0, z], [X1, Y1, z])+na = add_acc(add_view(struct.pack('<12f', *nrm), 34962), 5126, 4, 'VEC3')+ua = add_acc(add_view(struct.pack('<8f', *uv), 34962), 5126, 4, 'VEC2')+ia = add_acc(add_view(struct.pack('<6H', *idx), 34963), 5123, 6, 'SCALAR')+buf = io.BytesIO(); img.save(buf, 'PNG')+iv = add_view(buf.getvalue())+g.setdefault('images', []).append({'bufferView': iv, 'mimeType': 'image/png', 'name': 'etched-artwork'})+g.setdefault('samplers', []).append({'magFilter': 9729, 'minFilter': 9987, 'wrapS': 33071, 'wrapT': 33071})+g.setdefault('textures', []).append({'source': len(g['images']) - 1, 'sampler': len(g['samplers']) - 1})+t = len(g['textures']) - 1+g['materials'].append({'name': 'etched-artwork', 'alphaMode': 'BLEND', 'doubleSided': False,+ 'pbrMetallicRoughness': {'baseColorTexture': {'index': t}, 'metallicFactor': 0.0, 'roughnessFactor': 0.85},+ 'emissiveTexture': {'index': t}, 'emissiveFactor': [0.35, 0.35, 0.35]})+g['meshes'].append({'name': 'Adom.LaserEtch.Name', 'primitives': [{'attributes': {'POSITION': pa, 'NORMAL': na, 'TEXCOORD_0': ua},+ 'indices': ia, 'material': len(g['materials']) - 1}]})+g['nodes'].append({'name': 'Adom.LaserEtch.Name', 'mesh': len(g['meshes']) - 1,+ 'extras': {'tooltip': f'Laser-ablated artwork\n{name}', 'adomLayer': {'key': 'etch', 'label': 'Etched name', 'group': 'Artwork'}}})+g['scenes'][g.get('scene', 0)]['nodes'].append(len(g['nodes']) - 1)+while len(binc) % 4: binc.append(0)+g['buffers'][0]['byteLength'] = len(binc)+js = json.dumps(g, separators=(',', ':')).encode()+while len(js) % 4: js += b' '+out = struct.pack('<III', 0x46546C67, 2, 12 + 8 + len(js) + 8 + len(binc)) + struct.pack('<II', len(js), 0x4E4F534A) + js + struct.pack('<II', len(binc), 0x004E4942) + bytes(binc)+open(out_glb, 'wb').write(out)+print(f'{out_glb}: {len(out)/1e6:.2f} MB, font {size}px, cap {cap_mm:.1f} mm')
rev3/plate/steven-moss-etch-artwork.pngadded⋯ 1 unchanged line ⋯
rev3/plate/steven-moss-plate.glbadded⋯ 1 unchanged line ⋯