STC8H3K64S2-45I-TSSOP20

@@ -1,13 +1,198 @@ {+  "schema_version": 1,+  "type": "component",   "slug": "stc8h3k64s2-45i-tssop20",+  "title": "STC8H3K64S2-45I-TSSOP20",+  "brief": "STC Micro Microcontrollers (MCU/MPU/SOC), TSSOP-20. Datasheet-verified pinout, KiCad symbol/footprint/3D.",   "version": "0.1.0",-  "type": "component",-  "description": "STC Micro Microcontrollers (MCU/MPU/SOC), TSSOP-20. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "license": "CC-BY-SA-4.0",   "tags": [     "component",     "mcu",     "stc8h3k64s2-45i-tssop20"   ],+  "component": {+    "mpn": "STC8H3K64S2-45I-TSSOP20",+    "manufacturer": "STC Micro",+    "package": "TSSOP-20",+    "pin_count": 20,+    "category": "MCU",+    "subcategory": "Microcontrollers (MCU/MPU/SOC)",+    "datasheet": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2406181641_STC-Micro-STC8H3K64S2-45I-TSSOP20_C2901851.pdf",+    "parts": {+      "symbol": "stc8h3k64s2-45i-tssop20.kicad_sym",+      "footprint": "stc8h3k64s2-45i-tssop20.kicad_mod",+      "model_3d": "stc8h3k64s2-45i-tssop20.glb",+      "model_3d_step": "stc8h3k64s2-45i-tssop20.step",+      "lbr": "stc8h3k64s2-45i-tssop20.lbr"+    },+    "distributor_links": {},+    "pins": [+      {+        "number": "1",+        "name": "P1.0/ADC0/RxD2/PWM1P",+        "type": "bidirectional",+        "description": "Standard I/O P1.0; muxed with ADC channel 0 input, UART2 receive (RxD2), and PWM1 positive capture/output (PWM1P). Power-on state is high-impedance input (must be configured before use)."+      },+      {+        "number": "2",+        "name": "P1.6/ADC6/RxD_3/PWM4P/MCLKO_2/XTALO",+        "type": "bidirectional",+        "description": "Standard I/O P1.6; muxed with ADC channel 6, UART1 receive alt-3 (RxD_3), PWM4 positive output, master clock divided output (MCLKO_2), and external crystal output (XTALO)."+      },+      {+        "number": "3",+        "name": "P1.7/ADC7/TxD_3/PWM4N/PWM5_2/XTALI",+        "type": "bidirectional",+        "description": "Standard I/O P1.7; muxed with ADC channel 7, UART1 transmit alt-3 (TxD_3), PWM4 negative output, PWM5 capture/output alt-2, and external crystal/clock input (XTALI)."+      },+      {+        "number": "4",+        "name": "AGnd",+        "type": "power_in",+        "description": "ADC analog ground reference. Should be tied to the system ground plane at a single point near the MCU for best analog performance."+      },+      {+        "number": "5",+        "name": "ADC_VRef+",+        "type": "power_in",+        "description": "ADC external positive reference input, 2.4 V to MCU-VCC. Must be tied to an external reference (or AVcc for low-precision applications); leaving floating produces leakage current."+      },+      {+        "number": "6",+        "name": "AVcc",+        "type": "power_in",+        "description": "ADC analog supply pin (1.9 V to 5.5 V, matched to VCC). Decouple with 0.1 uF close to the pin."+      },+      {+        "number": "7",+        "name": "P5.4/nRST/MCLKO/SS_3/PWM6_2",+        "type": "bidirectional",+        "description": "Standard I/O P5.4; muxed with active-low external reset (nRST), master clock output (MCLKO), SPI slave-select alt-3 (SS_3), and PWM6 capture/output alt-2. Default at factory is P5.4 I/O; nRST function must be enabled via ISP option, which takes effect after a power cycle."+      },+      {+        "number": "8",+        "name": "Vcc",+        "type": "power_in",+        "description": "Main digital supply pin, 1.9 V to 5.5 V. Bulk decoupling of 10 uF plus 0.1 uF between Vcc and Gnd is recommended, placed close to the chip."+      },+      {+        "number": "9",+        "name": "P5.5",+        "type": "bidirectional",+        "description": "Standard general-purpose I/O port pin P5.5. Power-on state is high-impedance input; configure the port mode register before use."+      },+      {+        "number": "10",+        "name": "Gnd",+        "type": "power_in",+        "description": "Digital ground return for the main Vcc rail."+      },+      {+        "number": "11",+        "name": "P3.0/RxD/INT4",+        "type": "bidirectional",+        "description": "Standard I/O P3.0; muxed with UART1 receive (RxD) and external interrupt 4 (INT4). Also used together with P3.1/P3.2 by the mask-ROM bootloader to detect USB-ISP entry at reset."+      },+      {+        "number": "12",+        "name": "P3.1/TxD",+        "type": "bidirectional",+        "description": "Standard I/O P3.1; muxed with UART1 transmit (TxD). Powers up in weak pull-up (quasi-bidirectional) mode."+      },+      {+        "number": "13",+        "name": "P3.2/INT0/SCLK_4/SCL_4/PWMETI/PWMETI2",+        "type": "bidirectional",+        "description": "Standard I/O P3.2; muxed with external interrupt 0 (INT0), SPI clock alt-4 (SCLK_4), I2C clock alt-4 (SCL_4), and PWM external trigger inputs (PWMETI, PWMETI2)."+      },+      {+        "number": "14",+        "name": "P3.3/INT1/MISO_4/SDA_4/PWM4N_4/PWM7_2",+        "type": "bidirectional",+        "description": "Standard I/O P3.3; muxed with external interrupt 1 (INT1), SPI MISO alt-4, I2C SDA alt-4, PWM4 negative output alt-4, and PWM7 capture/output alt-2."+      },+      {+        "number": "15",+        "name": "P3.4/T0/T1CLKO/MOSI_4/PWM4P_4/PWM8_2/CMPO",+        "type": "bidirectional",+        "description": "Standard I/O P3.4; muxed with Timer 0 external clock input (T0), Timer 1 divided clock output (T1CLKO), SPI MOSI alt-4, PWM4 positive output alt-4, PWM8 capture/output alt-2, and analog comparator output (CMPO)."+      },+      {+        "number": "16",+        "name": "P3.5/T1/T0CLKO/SS_4/PWMFLT",+        "type": "bidirectional",+        "description": "Standard I/O P3.5; muxed with Timer 1 external clock input (T1), Timer 0 divided clock output (T0CLKO), SPI slave-select alt-4 (SS_4), and enhanced-PWM external fault input (PWMFLT)."+      },+      {+        "number": "17",+        "name": "P3.6/INT2/RxD_2/CMP-",+        "type": "bidirectional",+        "description": "Standard I/O P3.6; muxed with external interrupt 2 (INT2), UART1 receive alt-2 (RxD_2), and the analog comparator negative input (CMP-)."+      },+      {+        "number": "18",+        "name": "P3.7/INT3/TxD_2/CMP+",+        "type": "bidirectional",+        "description": "Standard I/O P3.7; muxed with external interrupt 3 (INT3), UART1 transmit alt-2 (TxD_2), and the analog comparator positive input (CMP+)."+      },+      {+        "number": "19",+        "name": "P1.2/ADC2/PWM2P/SS/T2",+        "type": "bidirectional",+        "description": "Standard I/O P1.2; muxed with ADC channel 2, PWM2 positive capture/output (PWM2P), SPI slave-select (SS), and Timer 2 external clock input (T2)."+      },+      {+        "number": "20",+        "name": "P1.1/ADC1/TxD2/PWM1N",+        "type": "bidirectional",+        "description": "Standard I/O P1.1; muxed with ADC channel 1, UART2 transmit (TxD2), and PWM1 negative output (PWM1N)."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2406181641_STC-Micro-STC8H3K64S2-45I-TSSOP20_C2901851.pdf",+        "pages": 2180,+        "sha256": "046aea020e4685f3",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 20,+        "described": 20,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "metadata": {+    "specs": {+      "Manufacturer": "STC Micro",+      "Package": "TSSOP-20",+      "Category": "MCU",+      "Pins": "20"+    }+  },+  "sections": [+    "hero",+    "viewers",+    "readme",+    "breadcrumbs",+    "info"+  ],+  "discovery_triggers": [+    "stc8h3k64s2-45i-tssop20"+  ],+  "discovery_pitch": "STC8H3K64S2-45I-TSSOP20 (STC Micro) component page with datasheet-verified CAD.",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  },   "dependencies": {},   "hero": {     "type": "image",@@ -25,10 +210,5 @@     "docs/stc8h3k64s2-45i-tssop20-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ],-  "visibility": "public",-  "author": {-    "name": "Ray",-    "email": "[email protected]"-  }+  ] }\ No newline at end of file