← Commit history

Initial commit: component/st7fmc1k2t6

Ray ·95157ef0cd ·
2 files changed +355
README.mdadded+68
@@ -0,0 +1,68 @@+# ST7FMC1K2T6++**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · LQFP-32(7x7)++ST7FMC1K2T6 from STMicroelectronics, in a LQFP-32(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | MCO3 | output | 20mA high-sink Motor Control PWM output channel 3 (MCO3, HS buffer). |+| 2 | MCO4 | output | 20mA high-sink Motor Control PWM output channel 4 (MCO4, HS buffer). |+| 3 | MCO5 | output | 20mA high-sink Motor Control PWM output channel 5 (MCO5, HS buffer). |+| 4 | MCES | input | MTC Emergency Stop input (top-priority asynchronous motor stop); it is a floating input and an external pull-up resistor must be used to disable this function. |+| 5 | OSC1 | input | External clock input or crystal/ceramic resonator oscillator inverter input for the on-chip oscillator. |+| 6 | OSC2 | bidirectional | Resonator oscillator inverter output; grounded when an external clock source is applied to OSC1. |+| 7 | PA3/PWM0/AIN0 | bidirectional | Port A3 CMOS Schmitt-trigger I/O, alternately PWM-ART Output 0 (PWM0) or ADC analog input 0 (AIN0); ei1 external interrupt capable. |+| 8 | PA5/ARTIC1/AIN1 | bidirectional | Port A5 CMOS Schmitt-trigger I/O, alternately PWM-ART Input Capture 1 (ARTIC1) or ADC analog input 1 (AIN1); ei1 external interrupt capable. |+| 9 | PB0/MCVREF | bidirectional | Port B0 I/O, alternately MTC Voltage Reference input (MCVREF) used for current/voltage-mode regulation. |+| 10 | PB1/MCIA | bidirectional | Port B1 I/O, alternately MTC rotor-position Input A (MCIA) for sensorless/hall/tacho/encoder detection. |+| 11 | PB2/MCIB | bidirectional | Port B2 I/O, alternately MTC rotor-position Input B (MCIB) for sensorless/hall/tacho/encoder detection. |+| 12 | PB3/MCIC | bidirectional | Port B3 I/O, alternately MTC rotor-position Input C (MCIC) for sensorless/hall/tacho/encoder detection. |+| 13 | PC2/OAP | bidirectional | Port C2 I/O, alternately Operational Amplifier Positive input (OAP); ei2 external interrupt capable. |+| 14 | PC3/OAN | bidirectional | Port C3 I/O, alternately Operational Amplifier Negative input (OAN); ei2 external interrupt capable. |+| 15 | OAZ/MCCFI1/AIN6 | bidirectional | Op-Amp output pin (OAZ), alternately MTC Current Feedback Input 1 (MCCFI1) or ADC analog input 6 (AIN6). |+| 16 | PC4/MCCREF | bidirectional | Port C4 I/O, alternately MTC Current Feedback Reference (MCCREF); once the MTC peripheral is enabled (CKE=1 or DAC=1) this pin is forced to the MCCREF alternate function and is no longer usable as digital I/O. |+| 17 | VAREF | power_in | Analog reference voltage input for the 10-bit ADC. |+| 18 | VSS_0 | power_in | Digital ground supply pin; all VSS pins must be connected to ground. |+| 19 | VDD_0 | power_in | Digital main supply voltage pin (4.5V to 5.5V); all VDD pins must be connected to the supply voltage. |+| 20 | RESET | bidirectional | Top-priority non-maskable reset input/output with CMOS Schmitt trigger. |+| 21 | PD0/OCMP2_A/MCPWMW/AIN11 | bidirectional | Port D0 I/O, alternately Timer A Output Compare 2 (OCMP2_A), MTC PWM Output W (MCPWMW, mapped here on 32-pin package), or ADC analog input 11 (AIN11). |+| 22 | PD1/OCMP1_A/MCPWMV/MCDEM | bidirectional | Port D1, 20mA high-sink I/O, alternately Timer A Output Compare 1 (OCMP1_A), MTC PWM Output V (MCPWMV) or MTC Demagnetization output (MCDEM, ORed with MCPWMV if both enabled); ei0 interrupt capable. |+| 23 | PD2/ICAP2_A/MCZEM/AIN12 | bidirectional | Port D2 I/O, alternately Timer A Input Capture 2 (ICAP2_A), MTC BEMF output (MCZEM), or ADC analog input 12 (AIN12); ei0 interrupt capable. |+| 24 | PD3/ICAP1_A/AIN13 | bidirectional | Port D3 I/O, alternately Timer A Input Capture 1 (ICAP1_A) or ADC analog input 13 (AIN13); ei0 interrupt capable. |+| 25 | PD4/EXTCLK_A/ICCCLK/AIN14 | bidirectional | Port D4 I/O, alternately Timer A External Clock source (EXTCLK_A), ICC Clock output (ICCCLK), or ADC analog input 14 (AIN14); ei0 interrupt capable. |+| 26 | PD5/ICCDATA/AIN15 | bidirectional | Port D5 I/O, alternately ICC Data input/output (ICCDATA) or ADC analog input 15 (AIN15); ei0 interrupt capable. |+| 27 | PD6/RDI | bidirectional | Port D6, 20mA high-sink I/O, alternately LINSCI Receive Data In (RDI); ei0 interrupt capable. |+| 28 | PD7/TDO | bidirectional | Port D7, 20mA high-sink I/O, alternately LINSCI Transmit Data Output (TDO). |+| 29 | VPP/ICCSEL | input | Must be tied low during normal operation; in programming mode acts as the programming voltage input (VPP) or ICC mode select pin. |+| 30 | MCO0 | output | 20mA high-sink Motor Control PWM output channel 0 (MCO0, HS buffer). |+| 31 | MCO1 | output | 20mA high-sink Motor Control PWM output channel 1 (MCO1, HS buffer). |+| 32 | MCO2 | output | 20mA high-sink Motor Control PWM output channel 2 (MCO2, HS buffer). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | LQFP-32(7x7) |+| Category | Embedded Processors & Controllers |+| Pins | 32 |++## CAD (KiCad official)++- Symbol: `ST7FMC1K2T6`+- Footprint: `Package_QFP:LQFP-32_7x7mm_P0.8mm`+- 3D model: LQFP-32(7x7) (KiCad packages3D, STEP)+- 3D model files: `st7fmc1k2t6-etched.step` / `st7fmc1k2t6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `st7fmc1k2t6.step` / `st7fmc1k2t6.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588923952245063680) (309 pp, sha256 `9f52eae3181db3cf`, retrieved 2026-09-23, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/st7fmc1k2t6-datasheet.pdf)
page.jsonadded+287
@@ -0,0 +1,287 @@+{+  "slug": "st7fmc1k2t6",+  "version": "0.1.0",+  "type": "component",+  "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-32(7x7). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "embedded processors & controllers",+    "st7fmc1k2t6",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "st7fmc1k2t6.kicad_sym",+    "st7fmc1k2t6.kicad_mod",+    "st7fmc1k2t6.glb",+    "st7fmc1k2t6.step",+    "st7fmc1k2t6.lbr",+    "docs/hero.png",+    "docs/st7fmc1k2t6-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "ST7FMC1K2T6",+    "manufacturer": "STMicroelectronics",+    "package": "LQFP-32(7x7)",+    "pin_count": 32,+    "category": "Embedded Processors & Controllers",+    "subcategory": "Microcontrollers (MCU/MPU/SOC)",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588923952245063680",+    "parts": {+      "symbol": "st7fmc1k2t6.kicad_sym",+      "footprint": "st7fmc1k2t6.kicad_mod",+      "model_3d": "st7fmc1k2t6-etched.glb",+      "model_3d_plain": "st7fmc1k2t6.glb",+      "model_3d_step": "st7fmc1k2t6-etched.step",+      "model_3d_step_plain": "st7fmc1k2t6.step",+      "lbr": "st7fmc1k2t6.lbr"+    },+    "distributor_links": {+      "lcsc": "C1342121"+    },+    "pins": [+      {+        "number": "1",+        "name": "MCO3",+        "type": "output",+        "description": "20mA high-sink Motor Control PWM output channel 3 (MCO3, HS buffer)."+      },+      {+        "number": "2",+        "name": "MCO4",+        "type": "output",+        "description": "20mA high-sink Motor Control PWM output channel 4 (MCO4, HS buffer)."+      },+      {+        "number": "3",+        "name": "MCO5",+        "type": "output",+        "description": "20mA high-sink Motor Control PWM output channel 5 (MCO5, HS buffer)."+      },+      {+        "number": "4",+        "name": "MCES",+        "type": "input",+        "description": "MTC Emergency Stop input (top-priority asynchronous motor stop); it is a floating input and an external pull-up resistor must be used to disable this function."+      },+      {+        "number": "5",+        "name": "OSC1",+        "type": "input",+        "description": "External clock input or crystal/ceramic resonator oscillator inverter input for the on-chip oscillator."+      },+      {+        "number": "6",+        "name": "OSC2",+        "type": "bidirectional",+        "description": "Resonator oscillator inverter output; grounded when an external clock source is applied to OSC1."+      },+      {+        "number": "7",+        "name": "PA3/PWM0/AIN0",+        "type": "bidirectional",+        "description": "Port A3 CMOS Schmitt-trigger I/O, alternately PWM-ART Output 0 (PWM0) or ADC analog input 0 (AIN0); ei1 external interrupt capable."+      },+      {+        "number": "8",+        "name": "PA5/ARTIC1/AIN1",+        "type": "bidirectional",+        "description": "Port A5 CMOS Schmitt-trigger I/O, alternately PWM-ART Input Capture 1 (ARTIC1) or ADC analog input 1 (AIN1); ei1 external interrupt capable."+      },+      {+        "number": "9",+        "name": "PB0/MCVREF",+        "type": "bidirectional",+        "description": "Port B0 I/O, alternately MTC Voltage Reference input (MCVREF) used for current/voltage-mode regulation."+      },+      {+        "number": "10",+        "name": "PB1/MCIA",+        "type": "bidirectional",+        "description": "Port B1 I/O, alternately MTC rotor-position Input A (MCIA) for sensorless/hall/tacho/encoder detection."+      },+      {+        "number": "11",+        "name": "PB2/MCIB",+        "type": "bidirectional",+        "description": "Port B2 I/O, alternately MTC rotor-position Input B (MCIB) for sensorless/hall/tacho/encoder detection."+      },+      {+        "number": "12",+        "name": "PB3/MCIC",+        "type": "bidirectional",+        "description": "Port B3 I/O, alternately MTC rotor-position Input C (MCIC) for sensorless/hall/tacho/encoder detection."+      },+      {+        "number": "13",+        "name": "PC2/OAP",+        "type": "bidirectional",+        "description": "Port C2 I/O, alternately Operational Amplifier Positive input (OAP); ei2 external interrupt capable."+      },+      {+        "number": "14",+        "name": "PC3/OAN",+        "type": "bidirectional",+        "description": "Port C3 I/O, alternately Operational Amplifier Negative input (OAN); ei2 external interrupt capable."+      },+      {+        "number": "15",+        "name": "OAZ/MCCFI1/AIN6",+        "type": "bidirectional",+        "description": "Op-Amp output pin (OAZ), alternately MTC Current Feedback Input 1 (MCCFI1) or ADC analog input 6 (AIN6)."+      },+      {+        "number": "16",+        "name": "PC4/MCCREF",+        "type": "bidirectional",+        "description": "Port C4 I/O, alternately MTC Current Feedback Reference (MCCREF); once the MTC peripheral is enabled (CKE=1 or DAC=1) this pin is forced to the MCCREF alternate function and is no longer usable as digital I/O."+      },+      {+        "number": "17",+        "name": "VAREF",+        "type": "power_in",+        "description": "Analog reference voltage input for the 10-bit ADC."+      },+      {+        "number": "18",+        "name": "VSS_0",+        "type": "power_in",+        "description": "Digital ground supply pin; all VSS pins must be connected to ground."+      },+      {+        "number": "19",+        "name": "VDD_0",+        "type": "power_in",+        "description": "Digital main supply voltage pin (4.5V to 5.5V); all VDD pins must be connected to the supply voltage."+      },+      {+        "number": "20",+        "name": "RESET",+        "type": "bidirectional",+        "description": "Top-priority non-maskable reset input/output with CMOS Schmitt trigger."+      },+      {+        "number": "21",+        "name": "PD0/OCMP2_A/MCPWMW/AIN11",+        "type": "bidirectional",+        "description": "Port D0 I/O, alternately Timer A Output Compare 2 (OCMP2_A), MTC PWM Output W (MCPWMW, mapped here on 32-pin package), or ADC analog input 11 (AIN11)."+      },+      {+        "number": "22",+        "name": "PD1/OCMP1_A/MCPWMV/MCDEM",+        "type": "bidirectional",+        "description": "Port D1, 20mA high-sink I/O, alternately Timer A Output Compare 1 (OCMP1_A), MTC PWM Output V (MCPWMV) or MTC Demagnetization output (MCDEM, ORed with MCPWMV if both enabled); ei0 interrupt capable."+      },+      {+        "number": "23",+        "name": "PD2/ICAP2_A/MCZEM/AIN12",+        "type": "bidirectional",+        "description": "Port D2 I/O, alternately Timer A Input Capture 2 (ICAP2_A), MTC BEMF output (MCZEM), or ADC analog input 12 (AIN12); ei0 interrupt capable."+      },+      {+        "number": "24",+        "name": "PD3/ICAP1_A/AIN13",+        "type": "bidirectional",+        "description": "Port D3 I/O, alternately Timer A Input Capture 1 (ICAP1_A) or ADC analog input 13 (AIN13); ei0 interrupt capable."+      },+      {+        "number": "25",+        "name": "PD4/EXTCLK_A/ICCCLK/AIN14",+        "type": "bidirectional",+        "description": "Port D4 I/O, alternately Timer A External Clock source (EXTCLK_A), ICC Clock output (ICCCLK), or ADC analog input 14 (AIN14); ei0 interrupt capable."+      },+      {+        "number": "26",+        "name": "PD5/ICCDATA/AIN15",+        "type": "bidirectional",+        "description": "Port D5 I/O, alternately ICC Data input/output (ICCDATA) or ADC analog input 15 (AIN15); ei0 interrupt capable."+      },+      {+        "number": "27",+        "name": "PD6/RDI",+        "type": "bidirectional",+        "description": "Port D6, 20mA high-sink I/O, alternately LINSCI Receive Data In (RDI); ei0 interrupt capable."+      },+      {+        "number": "28",+        "name": "PD7/TDO",+        "type": "bidirectional",+        "description": "Port D7, 20mA high-sink I/O, alternately LINSCI Transmit Data Output (TDO)."+      },+      {+        "number": "29",+        "name": "VPP/ICCSEL",+        "type": "input",+        "description": "Must be tied low during normal operation; in programming mode acts as the programming voltage input (VPP) or ICC mode select pin."+      },+      {+        "number": "30",+        "name": "MCO0",+        "type": "output",+        "description": "20mA high-sink Motor Control PWM output channel 0 (MCO0, HS buffer)."+      },+      {+        "number": "31",+        "name": "MCO1",+        "type": "output",+        "description": "20mA high-sink Motor Control PWM output channel 1 (MCO1, HS buffer)."+      },+      {+        "number": "32",+        "name": "MCO2",+        "type": "output",+        "description": "20mA high-sink Motor Control PWM output channel 2 (MCO2, HS buffer)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: Discrepancy between Figure 7 (LQFP32 7x7 pinout diagram) and Table 1 (ST7MC Device Pin Description).; VAREF (Analog Reference Voltage) description based on general ADC reference specifications. Exact vo; OAZ pin has complex functionality requiring motor control peripheral configuration (MREF register) t"+        ],+        "pages_sent": 65,+        "cost_usd": 0.8343,+        "at": "2026-09-23T11:16:14"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588923952245063680",+        "pages": 309,+        "sha256": "9f52eae3181db3cf",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 32,+        "described": 32,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file