SSP61CN4202MR

@@ -8,9 +8,9 @@ SSP61CN4202MR from Shanghai Siproin Microelectronics, in a SOT-23. Pinout and pi  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | VOUT | output | Detector output. On the 'N' variant this is an N-channel open-drain output (requires an external pull-up, e.g. 100kΩ). Output pulls to VSS when VDD ≤ VDET(-); high-Z when VDD > VDET(+). IOL ≥ 0.5 mA at VOUT=0.2V, Vin=2V. |-| 2 | GND | power_in | Ground / VSS reference for the device. |-| 3 | VIN | power_in | Supply voltage input and monitored voltage. Absolute maximum -0.3 V to +8.0 V. Operating range 0.7 V to 10 V (per Electrical Characteristics). Typical operating current ~0.7-1.1 µA. |+| 1 | VOUT | output | NMOS open-drain detector output. Pulled low (to VSS/GND) when VIN <= VDET(-) = 4.2V nominal; high-Z when VIN > VDET(+). Requires external pull-up resistor (e.g. 100 kOhm to VIN, or 47 kOhm to a separate supply for microcomputer reset). IOL >= 0.5 mA typ 1 mA at VOUT=0.2V, VIN=2V. |+| 2 | GND | power_in | Ground / negative supply reference (VSS). All internal voltages and the detector threshold are referenced to this pin. |+| 3 | VIN | power_in | Supply voltage input and monitored voltage. Operating range 0.7 V to 10 V; absolute maximum -0.3 V to 8.0 V. This is the node being compared against the internal 4.2V reference to generate the detector output. |  ## Key specifications 

@@ -32,19 +32,19 @@         "number": "1",         "name": "VOUT",         "type": "output",-        "description": "Detector output. On the 'N' variant this is an N-channel open-drain output (requires an external pull-up, e.g. 100kΩ). Output pulls to VSS when VDD ≤ VDET(-); high-Z when VDD > VDET(+). IOL ≥ 0.5 mA at VOUT=0.2V, Vin=2V."+        "description": "NMOS open-drain detector output. Pulled low (to VSS/GND) when VIN <= VDET(-) = 4.2V nominal; high-Z when VIN > VDET(+). Requires external pull-up resistor (e.g. 100 kOhm to VIN, or 47 kOhm to a separate supply for microcomputer reset). IOL >= 0.5 mA typ 1 mA at VOUT=0.2V, VIN=2V."       },       {         "number": "2",         "name": "GND",         "type": "power_in",-        "description": "Ground / VSS reference for the device."+        "description": "Ground / negative supply reference (VSS). All internal voltages and the detector threshold are referenced to this pin."       },       {         "number": "3",         "name": "VIN",         "type": "power_in",-        "description": "Supply voltage input and monitored voltage. Absolute maximum -0.3 V to +8.0 V. Operating range 0.7 V to 10 V (per Electrical Characteristics). Typical operating current ~0.7-1.1 µA."+        "description": "Supply voltage input and monitored voltage. Operating range 0.7 V to 10 V; absolute maximum -0.3 V to 8.0 V. This is the node being compared against the internal 4.2V reference to generate the detector output."       }     ],     "provenance": {@@ -108,8 +108,5 @@     "docs/ssp61cn4202mr-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ],-  "visibility": {-    "public": true-  }+  ] }\ No newline at end of file

@@ -50,7 +50,7 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description></description>+<description>Shanghai Siproin Microelectronics Supervisor and Reset ICs, SOT-23</description> <packages> <package name="SOT-23">   <description>3 pads, 3.4 x 2.5 mm. SOT, 3 Pin</description>@@ -82,6 +82,7 @@ </packages> <symbols> <symbol name="SSP61CN4202MR">+  <description>Shanghai Siproin Microelectronics Supervisor and Reset ICs, SOT-23</description>   <wire x1="-12.7" y1="2.54" x2="12.7" y2="2.54" width="0.254" layer="94"/>   <wire x1="12.7" y1="2.54" x2="12.7" y2="-5.08" width="0.254" layer="94"/>   <wire x1="12.7" y1="-5.08" x2="-12.7" y2="-5.08" width="0.254" layer="94"/>@@ -95,7 +96,7 @@ </symbols> <devicesets> <deviceset name="SSP61CN4202MR" prefix="U">-  <description></description>+  <description>Shanghai Siproin Microelectronics Supervisor and Reset ICs, SOT-23</description>   <gates>     <gate name="G$1" symbol="SSP61CN4202MR" x="0" y="0"/>   </gates>@@ -106,7 +107,12 @@         <connect gate="G$1" pin="GND" pad="2"/>         <connect gate="G$1" pin="VIN" pad="3"/>       </connects>-      <technologies><technology name=""/></technologies>+      <technologies>+        <technology name="">+          <attribute name="MPN" value="SSP61CN4202MR" constant="no"/>+          <attribute name="MANUFACTURER" value="Shanghai Siproin Microelectronics" constant="no"/>+        </technology>+      </technologies>     </device>   </devices> </deviceset>