component

SRP5030CC-2R2M

Public Made by Adom

Bourns Fixed Inductors, SMD,5.7x5.2mm. KiCad symbol, footprint and 3D as used on Adom boards.

Verified SRP5030CC-2R2M

by Claude, at Caleb Taylor's request · last 27 Oct 2026 · 1 record, 1 retired · files match

SymbolFootprint3D modelPins

27 Oct 2026Claude, at Caleb Taylor's requestValidated against Bourns' SRP5030CC Series datasheet (REV. 07/23)files match

SymbolFootprint3D modelPinsfor all variants

✓Datasheet: Bourns REV. 07/23 downloaded 2026-10-27 from bourns.com/docs/Product-Datasheets/SRP5030CC.pdf; same edition as the JLCPCB copy the page carried (the files differ only in Bourns' 2026 re-stamp), now replaced by the manufacturer's file
✓SRP5030CC-2R2M row on p.1: 2.2 uH +/-20 % at 100 kHz / 1 V, DCR 26 mOhm typ / 32 mOhm max, Irms 7 A, Isat 8 A
✓Pins: two-terminal inductor with no pin numbering in the datasheet (electrical schematic p.2); library convention numbers 1/2 with empty names (the board symbol's names "1"/"2" were removed); both passive
✓Footprint vs the Recommended Layout (p.2): 6.5 mm overall, 2.5 mm gap, 2.8 mm pad height gives pads 2.0 x 2.8 mm at 4.5 mm centres; the footprint has pads 2.0 x 2.8 mm at +/-2.25 mm, an exact match. Bottom terminals 1.1 x 2.5 mm lie inside the pads
✓3D body 5.72 x 5.20 x 2.80 mm against 5.7 +/-0.3, 5.2 +/-0.2 and 2.8 +/-0.2 (p.2); Z-up, seated on z = 0, centred on the pads
✓DigiKey 118-SRP5030CC-2R2MTR-ND and Mouser 652-SRP5030CC-2R2M confirmed as Bourns SRP5030CC-2R2M (searched 2026-10-27)
✓Symbol and footprint Datasheet properties point at the manufacturer datasheet URL
✓Symbol Datasheet / MPN / Manufacturer / DigiKey / Mouser / LCSC properties agree with page.json; footprint Datasheet property points at the manufacturer datasheet URL
✓component-page-verify: all checks pass

Verified files✓ srp5030cc-2r2m.kicad_sym✓ srp5030cc-2r2m.kicad_mod✓ srp5030cc-2r2m.step

9 Oct 2026Claude (AI build)Automated build checks (awaiting human validation)superseded

SymbolFootprint3D modelPinsfor all variants

✓Footprint extracted pad-for-pad from the source board and normalized to the footprint frame (back-side parts un-mirrored)
✓3D model seated z=0 at footprint origin (placement inverse; method centroid-matched to KiCad library models on 59 cases)
✓adom-lbr generate + lint passed
✓2 of 2 pins described
•Not yet checked by a person: land pattern vs datasheet, pin-1/orientation, 3D body vs drawing

Verified files! srp5030cc-2r2m.kicad_sym! srp5030cc-2r2m.kicad_mod✓ srp5030cc-2r2m.step

Spot something wrong? Report it as an issue · Propose a fix Records are signed by members of adom.

2 commits ← Back to file

Publish 0.1.2

Caleb · 103496c · 2d ago

Publish 0.1.1

Caleb · 0b90049 · 2d ago