component
SPX3819M5-L-3-0
Public Made by Adomby adom
MaxLinear Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+8−5@@ -32,7 +32,7 @@ "number": "1", "name": "VIN", "type": "power_in",- "description": "Supply input. Operating input voltage range 2.5V to 16V (absolute max -20V to +20V). Recommend a 1\u00b5F input capacitor for stability."+ "description": "Supply input. Operating input voltage range 2.5V to 16V (absolute max -20V to +20V). Recommend a 1µF input capacitor for stability." }, { "number": "2",@@ -44,19 +44,19 @@ "number": "3", "name": "EN", "type": "input",- "description": "Enable input. CMOS-compatible: logic high (VIH \u2265 2V) enables the regulator; logic low or open (VIL \u2264 0.4V) shuts down the device to near-zero current. Absolute max -20V to +20V. May be tied directly to VIN for always-on operation."+ "description": "Enable input. CMOS-compatible: logic high (VIH ≥ 2V) enables the regulator; logic low or open (VIL ≤ 0.4V) shuts down the device to near-zero current. Absolute max -20V to +20V. May be tied directly to VIN for always-on operation." }, { "number": "4", "name": "BYP", "type": "passive",- "description": "Internal reference bypass pin (fixed-output version, SPX3819M5-L-3-0 is fixed 3.0V). Connect a 10nF capacitor to ground to reduce output noise to as low as 40\u00b5VRMS. May be left unconnected if low noise is not required; note that BYP capacitor size affects start-up time."+ "description": "Internal reference bypass pin (fixed-output version, SPX3819M5-L-3-0 is fixed 3.0V). Connect a 10nF capacitor to ground to reduce output noise to as low as 40µVRMS. May be left unconnected if low noise is not required; note that BYP capacitor size affects start-up time." }, { "number": "5", "name": "VOUT", "type": "power_out",- "description": "Regulated output. Fixed 3.0V \u00b11% at up to 500mA load. Requires an output capacitor for stability (typ. 1\u00b5F ceramic or 2.2\u00b5F aluminum electrolytic). Current limit typ. 800mA (max 950mA)."+ "description": "Regulated output. Fixed 3.0V ±1% at up to 500mA load. Requires an output capacitor for stability (typ. 1µF ceramic or 2.2µF aluminum electrolytic). Current limit typ. 800mA (max 950mA)." } ], "provenance": {@@ -120,5 +120,8 @@ "docs/spx3819m5-l-3-0-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }