component
SP706TEN-L
Public Made by Adomby adom
MaxLinear Supervisor and Reset ICs, SOIC-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+116−8@@ -1,13 +1,126 @@ {+ "schema_version": 1,+ "type": "component", "slug": "sp706ten-l",+ "title": "SP706TEN-L",+ "brief": "MaxLinear Supervisor and Reset ICs, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "version": "0.1.0",- "type": "component",- "description": "MaxLinear Supervisor and Reset ICs, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "license": "CC-BY-SA-4.0", "tags": [ "component", "pmic", "sp706ten-l" ],+ "component": {+ "mpn": "SP706TEN-L",+ "manufacturer": "MaxLinear",+ "package": "SOIC-8",+ "pin_count": 8,+ "category": "PMIC",+ "subcategory": "Supervisor and Reset ICs",+ "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/28423321703a488dbbbfe120f79d2d88.pdf",+ "parts": {+ "symbol": "sp706ten-l.kicad_sym",+ "footprint": "sp706ten-l.kicad_mod",+ "model_3d": "sp706ten-l.glb",+ "model_3d_step": "sp706ten-l.step",+ "lbr": "sp706ten-l.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "MR",+ "type": "input",+ "description": "Manual Reset (active LOW). Triggers a 200ms reset pulse when pulled below 0.8V. Has internal ~70\u00b5A pull-up to VCC; can be driven by TTL/CMOS logic or a switch to ground."+ },+ {+ "number": "2",+ "name": "VCC",+ "type": "power_in",+ "description": "Voltage Input. Operating range 1.0V to 5.5V (SP70xT typical 3.0-5.5V). Supply current typically 25\u00b5A at 3.3V."+ },+ {+ "number": "3",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for all signals."+ },+ {+ "number": "4",+ "name": "PFI",+ "type": "input",+ "description": "Power-Fail comparator Input. When voltage on this pin is less than the 1.25V internal reference, PFO goes LOW. Connect PFI to GND or VCC when unused."+ },+ {+ "number": "5",+ "name": "PFO",+ "type": "output",+ "description": "Power-Fail comparator Output (active LOW). Output is LOW until PFI is greater than 1.25V. Typical drive: ISOURCE=500\u00b5A at VCC<3.6V, ISINK=1.2mA."+ },+ {+ "number": "6",+ "name": "WDI",+ "type": "input",+ "description": "Watchdog Input. If this input stays HIGH or LOW for 1.6s, the watchdog times out and WDO goes LOW. Floating WDI or tri-stating it disables the watchdog. Timer clears on any rising/falling edge or while RESET is asserted."+ },+ {+ "number": "7",+ "name": "RESET",+ "type": "output",+ "description": "Active-LOW RESET output. Pulses LOW for 200ms when triggered and stays LOW whenever VCC is below the 3.08V reset threshold. Remains LOW for 200ms after VCC rises above threshold or MR goes HIGH. Watchdog timeout only triggers RESET if WDO is tied to MR."+ },+ {+ "number": "8",+ "name": "WDO",+ "type": "output",+ "description": "Watchdog Output (active LOW). Pulls LOW when the internal 1.6s watchdog timer expires and remains LOW until the watchdog is cleared. Also goes LOW during low-line conditions and while VCC is below the reset threshold; no minimum pulse width. Returns HIGH with no delay once VCC recovers."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://datasheet.lcsc.com/datasheet/pdf/28423321703a488dbbbfe120f79d2d88.pdf",+ "pages": 17,+ "sha256": "2bdbc0752cea3816",+ "source_tier": "mfr"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 8,+ "described": 8,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Manufacturer": "MaxLinear",+ "Package": "SOIC-8",+ "Category": "PMIC",+ "Pins": "8"+ }+ },+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "sp706ten-l"+ ],+ "discovery_pitch": "SP706TEN-L (MaxLinear) component page with datasheet-verified CAD.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -25,10 +138,5 @@ "docs/sp706ten-l-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }