component
SP483EEN-L
Public Made by Adomby adom
MaxLinear RS-485 / RS-422 ICs, SOIC-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+11−8@@ -32,25 +32,25 @@ "number": "1", "name": "RO", "type": "output",- "description": "Receiver output. CMOS logic output driven from the differential A/B receiver; VOH \u2265 3.5V (IO = -4mA), VOL \u2264 0.4V (IO = 4mA). High-impedance (tri-state) when RE is high."+ "description": "Receiver output. CMOS logic output driven from the differential A/B receiver; VOH ≥ 3.5V (IO = -4mA), VOL ≤ 0.4V (IO = 4mA). High-impedance (tri-state) when RE is high." }, { "number": "2", "name": "RE", "type": "input",- "description": "Receiver output enable, active LOW. Drive low to enable the receiver output RO; drive high to place RO in high-impedance state. TTL/CMOS-compatible input (VIH \u2265 2.0V, VIL \u2264 0.8V)."+ "description": "Receiver output enable, active LOW. Drive low to enable the receiver output RO; drive high to place RO in high-impedance state. TTL/CMOS-compatible input (VIH ≥ 2.0V, VIL ≤ 0.8V)." }, { "number": "3", "name": "DE", "type": "input",- "description": "Driver output enable, active HIGH. Drive high to enable the differential driver on A/B; drive low to place A/B in high-impedance state. TTL/CMOS-compatible input (VIH \u2265 2.0V, VIL \u2264 0.8V)."+ "description": "Driver output enable, active HIGH. Drive high to enable the differential driver on A/B; drive low to place A/B in high-impedance state. TTL/CMOS-compatible input (VIH ≥ 2.0V, VIL ≤ 0.8V)." }, { "number": "4", "name": "DI", "type": "input",- "description": "Driver input. CMOS/TTL logic input that drives the differential A/B outputs when the driver is enabled. VIH \u2265 2.0V, VIL \u2264 0.8V; input current \u2264 10\u00b5A."+ "description": "Driver input. CMOS/TTL logic input that drives the differential A/B outputs when the driver is enabled. VIH ≥ 2.0V, VIL ≤ 0.8V; input current ≤ 10µA." }, { "number": "5",@@ -62,19 +62,19 @@ "number": "6", "name": "A", "type": "bidirectional",- "description": "Non-inverting RS-485/RS-422 bus line. Acts as the non-inverting driver output when DE is high and as the non-inverting receiver input when RE is low. Withstands -7V to +12V common-mode range; \u00b115kV HBM / \u00b18kV IEC contact ESD protected."+ "description": "Non-inverting RS-485/RS-422 bus line. Acts as the non-inverting driver output when DE is high and as the non-inverting receiver input when RE is low. Withstands -7V to +12V common-mode range; ±15kV HBM / ±8kV IEC contact ESD protected." }, { "number": "7", "name": "B", "type": "bidirectional",- "description": "Inverting RS-485/RS-422 bus line. Acts as the inverting driver output when DE is high and as the inverting receiver input when RE is low. Withstands -7V to +12V common-mode range; \u00b115kV HBM / \u00b18kV IEC contact ESD protected."+ "description": "Inverting RS-485/RS-422 bus line. Acts as the inverting driver output when DE is high and as the inverting receiver input when RE is low. Withstands -7V to +12V common-mode range; ±15kV HBM / ±8kV IEC contact ESD protected." }, { "number": "8", "name": "VCC", "type": "power_in",- "description": "Positive supply, 4.75V \u2264 VCC \u2264 5.25V (nominal 5V). Decouple to GND with a 0.1\u00b5F ceramic capacitor placed close to the pin. Absolute maximum 7.0V."+ "description": "Positive supply, 4.75V ≤ VCC ≤ 5.25V (nominal 5V). Decouple to GND with a 0.1µF ceramic capacitor placed close to the pin. Absolute maximum 7.0V." } ], "provenance": {@@ -138,5 +138,8 @@ "docs/sp483een-l-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }