← Commit history

Initial commit: component/sp3238eea-l

Ray ·d93669adc4 ·
2 files changed +327
README.mdadded+64
@@ -0,0 +1,64 @@+# SP3238EEA-L++**MaxLinear** · RS232 ICs · SSOP-28-208mil++SP3238EEA-L from MaxLinear, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | C2+ | passive | Positive terminal of the symmetrical charge-pump capacitor C2; connect to external 0.1µF to 0.33µF capacitor. |+| 2 | GND | power_in | Ground reference for the device. |+| 3 | C2- | passive | Negative terminal of the symmetrical charge-pump capacitor C2; connect to external 0.1µF to 0.33µF capacitor. |+| 4 | V- | power_out | Regulated -5.5V output generated by the internal charge pump; maximum magnitude 7V per absolute maximum ratings. |+| 5 | T1OUT | output | RS-232 Driver Output for transmitter 1; voltage swing +5.0V minimum fully loaded with 3kΩ, short-circuit duration continuous. |+| 6 | T2OUT | output | RS-232 Driver Output for transmitter 2; voltage swing +5.0V minimum fully loaded with 3kΩ, short-circuit duration continuous. |+| 7 | T3OUT | output | RS-232 Driver Output for transmitter 3; voltage swing +5.0V minimum fully loaded with 3kΩ, short-circuit duration continuous. |+| 8 | R1IN | input | RS-232 receiver input for channel 1; input voltage range -25V to +25V with input hysteresis 0.5V typical. |+| 9 | R2IN | input | RS-232 receiver input for channel 2; input voltage range -25V to +25V with input hysteresis 0.5V typical. |+| 10 | T4OUT | output | RS-232 Driver Output for transmitter 4; voltage swing +5.0V minimum fully loaded with 3kΩ, short-circuit duration continuous. |+| 11 | R3IN | input | RS-232 receiver input for channel 3; input voltage range -25V to +25V with input hysteresis 0.5V typical. |+| 12 | T5OUT | output | RS-232 Driver Output for transmitter 5; voltage swing +5.0V minimum fully loaded with 3kΩ, short-circuit duration continuous. |+| 13 | ONLINE | input | Logic input (0 to VCC) to override AUTO ON-LINE® circuitry; logic HIGH keeps drivers active when SHUTDOWN is also HIGH. |+| 14 | SHUTDOWN | input | Logic input (0 to VCC) to shut down drivers and charge pump; logic LOW activates shutdown mode with supply current less than 1µA. |+| 15 | STATUS | output | TTL/CMOS Output indicating if RS-232 signal is present on any receiver input; goes HIGH when external transmitters enabled and cable connected. |+| 16 | R1OUT | output | Non-Inverting receiver output from channel 1; active in shutdown mode, drives 0.4V LOW to (VCC-0.1V) HIGH with 1.6mA sink or 1.0mA source. |+| 17 | T5IN | input | TTL/CMOS driver input for transmitter 5; accepts 0 to VCC logic levels with 0.8V LOW and 2.4V HIGH thresholds. |+| 18 | R3OUT | output | TTL/CMOS receiver output from channel 3; drives 0.4V LOW to (VCC-0.1V) HIGH, high-impedance when receivers disabled. |+| 19 | T4IN | input | TTL/CMOS driver input for transmitter 4; accepts 0 to VCC logic levels with 0.8V LOW and 2.4V HIGH thresholds. |+| 20 | R2OUT | output | TTL/CMOS receiver output from channel 2; drives 0.4V LOW to (VCC-0.1V) HIGH, high-impedance when receivers disabled. |+| 21 | R1OUT | output | TTL/CMOS receiver output from channel 1; drives 0.4V LOW to (VCC-0.1V) HIGH, high-impedance when receivers disabled. |+| 22 | T3IN | input | TTL/CMOS driver input for transmitter 3; accepts 0 to VCC logic levels with 0.8V LOW and 2.4V HIGH thresholds. |+| 23 | T2IN | input | TTL/CMOS driver input for transmitter 2; accepts 0 to VCC logic levels with 0.8V LOW and 2.4V HIGH thresholds. |+| 24 | T1IN | input | TTL/CMOS driver input for transmitter 1; accepts 0 to VCC logic levels with 0.8V LOW and 2.4V HIGH thresholds. |+| 25 | C1- | passive | Negative terminal of the symmetrical charge-pump capacitor C1; connect to external 0.1µF to 0.047µF capacitor. |+| 26 | VCC | power_in | Supply voltage input; +3.0V to +5.5V operating range with maximum ICC ±100mA. |+| 27 | V+ | power_out | Regulated +5.5V output generated by the internal charge pump; maximum magnitude 7V per absolute maximum ratings. |+| 28 | C1+ | passive | Positive terminal of the symmetrical charge-pump capacitor C1; connect to external 0.1µF to 0.047µF capacitor. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | MaxLinear |+| Package | SSOP-28-208mil |+| Category | Interface |+| Pins | 28 |++## CAD (KiCad official)++- Symbol: `SP3238EEA-L`+- Footprint: `Package_SO:SSOP-28_5.3x10.2mm_P0.65mm`+- 3D model: SSOP-28-208mil (KiCad packages3D, STEP)+- 3D model files: `sp3238eea-l-etched.step` / `sp3238eea-l-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sp3238eea-l.step` / `sp3238eea-l.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [MaxLinear datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586202791123824640) (20 pp, sha256 `509a9d06aa065a68`, retrieved 2026-09-21, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/sp3238eea-l-datasheet.pdf)
page.jsonadded+263
@@ -0,0 +1,263 @@+{+  "slug": "sp3238eea-l",+  "version": "0.1.0",+  "type": "component",+  "description": "MaxLinear RS232 ICs, SSOP-28-208mil. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "interface",+    "sp3238eea-l",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "sp3238eea-l.kicad_sym",+    "sp3238eea-l.kicad_mod",+    "sp3238eea-l.glb",+    "sp3238eea-l.step",+    "sp3238eea-l.lbr",+    "docs/hero.png",+    "docs/sp3238eea-l-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "SP3238EEA-L",+    "manufacturer": "MaxLinear",+    "package": "SSOP-28-208mil",+    "pin_count": 28,+    "category": "Interface",+    "subcategory": "RS232 ICs",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586202791123824640",+    "parts": {+      "symbol": "sp3238eea-l.kicad_sym",+      "footprint": "sp3238eea-l.kicad_mod",+      "model_3d": "sp3238eea-l-etched.glb",+      "model_3d_plain": "sp3238eea-l.glb",+      "model_3d_step": "sp3238eea-l-etched.step",+      "model_3d_step_plain": "sp3238eea-l.step",+      "lbr": "sp3238eea-l.lbr"+    },+    "distributor_links": {+      "lcsc": "C49669"+    },+    "pins": [+      {+        "number": "1",+        "name": "C2+",+        "type": "passive",+        "description": "Positive terminal of the symmetrical charge-pump capacitor C2; connect to external 0.1µF to 0.33µF capacitor."+      },+      {+        "number": "2",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference for the device."+      },+      {+        "number": "3",+        "name": "C2-",+        "type": "passive",+        "description": "Negative terminal of the symmetrical charge-pump capacitor C2; connect to external 0.1µF to 0.33µF capacitor."+      },+      {+        "number": "4",+        "name": "V-",+        "type": "power_out",+        "description": "Regulated -5.5V output generated by the internal charge pump; maximum magnitude 7V per absolute maximum ratings."+      },+      {+        "number": "5",+        "name": "T1OUT",+        "type": "output",+        "description": "RS-232 Driver Output for transmitter 1; voltage swing +5.0V minimum fully loaded with 3kΩ, short-circuit duration continuous."+      },+      {+        "number": "6",+        "name": "T2OUT",+        "type": "output",+        "description": "RS-232 Driver Output for transmitter 2; voltage swing +5.0V minimum fully loaded with 3kΩ, short-circuit duration continuous."+      },+      {+        "number": "7",+        "name": "T3OUT",+        "type": "output",+        "description": "RS-232 Driver Output for transmitter 3; voltage swing +5.0V minimum fully loaded with 3kΩ, short-circuit duration continuous."+      },+      {+        "number": "8",+        "name": "R1IN",+        "type": "input",+        "description": "RS-232 receiver input for channel 1; input voltage range -25V to +25V with input hysteresis 0.5V typical."+      },+      {+        "number": "9",+        "name": "R2IN",+        "type": "input",+        "description": "RS-232 receiver input for channel 2; input voltage range -25V to +25V with input hysteresis 0.5V typical."+      },+      {+        "number": "10",+        "name": "T4OUT",+        "type": "output",+        "description": "RS-232 Driver Output for transmitter 4; voltage swing +5.0V minimum fully loaded with 3kΩ, short-circuit duration continuous."+      },+      {+        "number": "11",+        "name": "R3IN",+        "type": "input",+        "description": "RS-232 receiver input for channel 3; input voltage range -25V to +25V with input hysteresis 0.5V typical."+      },+      {+        "number": "12",+        "name": "T5OUT",+        "type": "output",+        "description": "RS-232 Driver Output for transmitter 5; voltage swing +5.0V minimum fully loaded with 3kΩ, short-circuit duration continuous."+      },+      {+        "number": "13",+        "name": "ONLINE",+        "type": "input",+        "description": "Logic input (0 to VCC) to override AUTO ON-LINE® circuitry; logic HIGH keeps drivers active when SHUTDOWN is also HIGH."+      },+      {+        "number": "14",+        "name": "SHUTDOWN",+        "type": "input",+        "description": "Logic input (0 to VCC) to shut down drivers and charge pump; logic LOW activates shutdown mode with supply current less than 1µA."+      },+      {+        "number": "15",+        "name": "STATUS",+        "type": "output",+        "description": "TTL/CMOS Output indicating if RS-232 signal is present on any receiver input; goes HIGH when external transmitters enabled and cable connected."+      },+      {+        "number": "16",+        "name": "R1OUT",+        "type": "output",+        "description": "Non-Inverting receiver output from channel 1; active in shutdown mode, drives 0.4V LOW to (VCC-0.1V) HIGH with 1.6mA sink or 1.0mA source."+      },+      {+        "number": "17",+        "name": "T5IN",+        "type": "input",+        "description": "TTL/CMOS driver input for transmitter 5; accepts 0 to VCC logic levels with 0.8V LOW and 2.4V HIGH thresholds."+      },+      {+        "number": "18",+        "name": "R3OUT",+        "type": "output",+        "description": "TTL/CMOS receiver output from channel 3; drives 0.4V LOW to (VCC-0.1V) HIGH, high-impedance when receivers disabled."+      },+      {+        "number": "19",+        "name": "T4IN",+        "type": "input",+        "description": "TTL/CMOS driver input for transmitter 4; accepts 0 to VCC logic levels with 0.8V LOW and 2.4V HIGH thresholds."+      },+      {+        "number": "20",+        "name": "R2OUT",+        "type": "output",+        "description": "TTL/CMOS receiver output from channel 2; drives 0.4V LOW to (VCC-0.1V) HIGH, high-impedance when receivers disabled."+      },+      {+        "number": "21",+        "name": "R1OUT",+        "type": "output",+        "description": "TTL/CMOS receiver output from channel 1; drives 0.4V LOW to (VCC-0.1V) HIGH, high-impedance when receivers disabled."+      },+      {+        "number": "22",+        "name": "T3IN",+        "type": "input",+        "description": "TTL/CMOS driver input for transmitter 3; accepts 0 to VCC logic levels with 0.8V LOW and 2.4V HIGH thresholds."+      },+      {+        "number": "23",+        "name": "T2IN",+        "type": "input",+        "description": "TTL/CMOS driver input for transmitter 2; accepts 0 to VCC logic levels with 0.8V LOW and 2.4V HIGH thresholds."+      },+      {+        "number": "24",+        "name": "T1IN",+        "type": "input",+        "description": "TTL/CMOS driver input for transmitter 1; accepts 0 to VCC logic levels with 0.8V LOW and 2.4V HIGH thresholds."+      },+      {+        "number": "25",+        "name": "C1-",+        "type": "passive",+        "description": "Negative terminal of the symmetrical charge-pump capacitor C1; connect to external 0.1µF to 0.047µF capacitor."+      },+      {+        "number": "26",+        "name": "VCC",+        "type": "power_in",+        "description": "Supply voltage input; +3.0V to +5.5V operating range with maximum ICC ±100mA."+      },+      {+        "number": "27",+        "name": "V+",+        "type": "power_out",+        "description": "Regulated +5.5V output generated by the internal charge pump; maximum magnitude 7V per absolute maximum ratings."+      },+      {+        "number": "28",+        "name": "C1+",+        "type": "passive",+        "description": "Positive terminal of the symmetrical charge-pump capacitor C1; connect to external 0.1µF to 0.047µF capacitor."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: Pins 16 and 21 both named R1OUT per datasheet Table 1: pin 16 is the non-inverting always-active rec"+        ],+        "pages_sent": 20,+        "cost_usd": 0.3108,+        "at": "2026-09-21T19:26:52"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586202791123824640",+        "pages": 20,+        "sha256": "509a9d06aa065a68",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 28,+        "described": 28,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file