← Commit history

Initial commit: component/sp3232ebea-l

Ray ·e274e16ef3 ·
2 files changed +243
README.mdadded+52
@@ -0,0 +1,52 @@+# SP3232EBEA-L++**MaxLinear** · RS232 ICs · SSOP-16++SP3232EBEA-L from MaxLinear, in a SSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | C1+ | passive | Positive terminal of the voltage doubler charge-pump capacitor; connect 0.1µF minimum capacitor. |+| 2 | V+ | power_out | Charge pump output generating +5.5V from single 3.0V to 5.5V supply for RS-232 driver operation. |+| 3 | C1- | passive | Negative terminal of the voltage doubler charge-pump capacitor; connect 0.1µF minimum capacitor. |+| 4 | C2+ | passive | Positive terminal of the inverting charge-pump capacitor; connect 0.1µF minimum capacitor. |+| 5 | C2- | passive | Negative terminal of the inverting charge-pump capacitor; connect 0.1µF minimum capacitor. |+| 6 | V- | power_out | Charge pump output generating -5.5V from single 3.0V to 5.5V supply for RS-232 driver operation. |+| 7 | T2OUT | output | RS-232 transmitter 2 driver output with inverting logic; delivers ±5.0V minimum to ±5.4V typical voltage swing with 3kΩ load. |+| 8 | R2IN | input | RS-232 receiver 2 input accepting signal voltages from -15V to +15V with 300mV typical hysteresis margin. |+| 9 | R2OUT | output | TTL/CMOS receiver 2 output with inverting logic; output voltage 0.4V typical at 1.6mA sink or VCC-0.1V at 1.0mA source. |+| 10 | T2IN | input | TTL/CMOS transmitter 2 driver input; logic threshold LOW 0.8V, HIGH 2.0V at VCC=3.3V. |+| 11 | T1IN | input | TTL/CMOS transmitter 1 driver input; logic threshold LOW 0.8V, HIGH 2.0V at VCC=3.3V. |+| 12 | R1OUT | output | TTL/CMOS receiver 1 output with inverting logic; output voltage 0.4V typical at 1.6mA sink or VCC-0.1V at 1.0mA source. |+| 13 | R1IN | input | RS-232 receiver 1 input accepting signal voltages from -15V to +15V with 300mV typical hysteresis margin. |+| 14 | T1OUT | output | RS-232 transmitter 1 driver output with inverting logic; delivers ±5.0V minimum to ±5.4V typical voltage swing with 3kΩ load. |+| 15 | GND | power_in | Ground connection; reference potential for all signal and supply pins. |+| 16 | VCC | power_in | Supply voltage input; accept 3.0V to 5.5V for true RS-232 operation with on-board charge pump. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | MaxLinear |+| Package | SSOP-16 |+| Category | Interface |+| Pins | 16 |++## CAD (KiCad official)++- Symbol: `SP3232EBEA-L`+- Footprint: `Package_SO:SSOP-16_5.3x6.2mm_P0.65mm`+- 3D model: SSOP-16 (KiCad packages3D, STEP)+- 3D model files: `sp3232ebea-l-etched.step` / `sp3232ebea-l-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sp3232ebea-l.step` / `sp3232ebea-l.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [MaxLinear datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588924836621639680) (24 pp, sha256 `77e58341a1579432`, retrieved 2026-09-18, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/sp3232ebea-l-datasheet.pdf)
page.jsonadded+191
@@ -0,0 +1,191 @@+{+  "slug": "sp3232ebea-l",+  "version": "0.1.0",+  "type": "component",+  "description": "MaxLinear RS232 ICs, SSOP-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "interface",+    "sp3232ebea-l",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "sp3232ebea-l.kicad_sym",+    "sp3232ebea-l.kicad_mod",+    "sp3232ebea-l.glb",+    "sp3232ebea-l.step",+    "sp3232ebea-l.lbr",+    "docs/hero.png",+    "docs/sp3232ebea-l-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "SP3232EBEA-L",+    "manufacturer": "MaxLinear",+    "package": "SSOP-16",+    "pin_count": 16,+    "category": "Interface",+    "subcategory": "RS232 ICs",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588924836621639680",+    "parts": {+      "symbol": "sp3232ebea-l.kicad_sym",+      "footprint": "sp3232ebea-l.kicad_mod",+      "model_3d": "sp3232ebea-l-etched.glb",+      "model_3d_plain": "sp3232ebea-l.glb",+      "model_3d_step": "sp3232ebea-l-etched.step",+      "model_3d_step_plain": "sp3232ebea-l.step",+      "lbr": "sp3232ebea-l.lbr"+    },+    "distributor_links": {+      "lcsc": "C2671951"+    },+    "pins": [+      {+        "number": "1",+        "name": "C1+",+        "type": "passive",+        "description": "Positive terminal of the voltage doubler charge-pump capacitor; connect 0.1µF minimum capacitor."+      },+      {+        "number": "2",+        "name": "V+",+        "type": "power_out",+        "description": "Charge pump output generating +5.5V from single 3.0V to 5.5V supply for RS-232 driver operation."+      },+      {+        "number": "3",+        "name": "C1-",+        "type": "passive",+        "description": "Negative terminal of the voltage doubler charge-pump capacitor; connect 0.1µF minimum capacitor."+      },+      {+        "number": "4",+        "name": "C2+",+        "type": "passive",+        "description": "Positive terminal of the inverting charge-pump capacitor; connect 0.1µF minimum capacitor."+      },+      {+        "number": "5",+        "name": "C2-",+        "type": "passive",+        "description": "Negative terminal of the inverting charge-pump capacitor; connect 0.1µF minimum capacitor."+      },+      {+        "number": "6",+        "name": "V-",+        "type": "power_out",+        "description": "Charge pump output generating -5.5V from single 3.0V to 5.5V supply for RS-232 driver operation."+      },+      {+        "number": "7",+        "name": "T2OUT",+        "type": "output",+        "description": "RS-232 transmitter 2 driver output with inverting logic; delivers ±5.0V minimum to ±5.4V typical voltage swing with 3kΩ load."+      },+      {+        "number": "8",+        "name": "R2IN",+        "type": "input",+        "description": "RS-232 receiver 2 input accepting signal voltages from -15V to +15V with 300mV typical hysteresis margin."+      },+      {+        "number": "9",+        "name": "R2OUT",+        "type": "output",+        "description": "TTL/CMOS receiver 2 output with inverting logic; output voltage 0.4V typical at 1.6mA sink or VCC-0.1V at 1.0mA source."+      },+      {+        "number": "10",+        "name": "T2IN",+        "type": "input",+        "description": "TTL/CMOS transmitter 2 driver input; logic threshold LOW 0.8V, HIGH 2.0V at VCC=3.3V."+      },+      {+        "number": "11",+        "name": "T1IN",+        "type": "input",+        "description": "TTL/CMOS transmitter 1 driver input; logic threshold LOW 0.8V, HIGH 2.0V at VCC=3.3V."+      },+      {+        "number": "12",+        "name": "R1OUT",+        "type": "output",+        "description": "TTL/CMOS receiver 1 output with inverting logic; output voltage 0.4V typical at 1.6mA sink or VCC-0.1V at 1.0mA source."+      },+      {+        "number": "13",+        "name": "R1IN",+        "type": "input",+        "description": "RS-232 receiver 1 input accepting signal voltages from -15V to +15V with 300mV typical hysteresis margin."+      },+      {+        "number": "14",+        "name": "T1OUT",+        "type": "output",+        "description": "RS-232 transmitter 1 driver output with inverting logic; delivers ±5.0V minimum to ±5.4V typical voltage swing with 3kΩ load."+      },+      {+        "number": "15",+        "name": "GND",+        "type": "power_in",+        "description": "Ground connection; reference potential for all signal and supply pins."+      },+      {+        "number": "16",+        "name": "VCC",+        "type": "power_in",+        "description": "Supply voltage input; accept 3.0V to 5.5V for true RS-232 operation with on-board charge pump."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: V+ and V- pins are labeled as power_out, but their actual function as charge-pump outputs that feed "+        ],+        "pages_sent": 24,+        "cost_usd": 0.4357,+        "at": "2026-09-18T06:08:07"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588924836621639680",+        "pages": 24,+        "sha256": "77e58341a1579432",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 16,+        "described": 16,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file