← Commit history

Initial commit: component/sp3223eey-l

Ray ·e62fbd6273 ·
2 files changed +269
README.mdadded+56
@@ -0,0 +1,56 @@+# SP3223EEY-L++**MaxLinear** · RS232 ICs · TSSOP-20++SP3223EEY-L from MaxLinear, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | EN | input | Receiver Enable; apply logic LOW for normal operation, apply logic HIGH to disable receiver outputs to high-Z state. |+| 2 | C1+ | passive | Positive terminal of the voltage doubler charge-pump capacitor, typically 0.1µF for 3.3V operation. |+| 3 | V+ | power_out | Regulated +5.5V output generated by charge pump from single VCC supply. |+| 4 | C1- | passive | Negative terminal of the voltage doubler charge-pump capacitor, typically 0.1µF for 3.3V operation. |+| 5 | C2+ | passive | Positive terminal of the inverting charge-pump capacitor, typically 0.1µF for 3.3V operation. |+| 6 | C2- | passive | Negative terminal of the inverting charge-pump capacitor, typically 0.1µF for 3.3V operation. |+| 7 | V- | power_out | Regulated -5.5V output generated by charge pump from single VCC supply. |+| 8 | T2OUT | output | RS-232 Driver output with regulated ±5.0V to ±5.4V swing, protected against continuous short-circuit to ground. |+| 9 | R2IN | input | RS-232 receiver input with -15V to +15V input range and 300mV hysteresis, 5kΩ pull-down resistor to ground. |+| 10 | R2OUT | output | TTL/CMOS receiver output, inverted from RS-232 input, disabled by EN pin to high-Z state. |+| 11 | STATUS | output | TTL/CMOS output indicating online and shutdown status; LOW when shutdown, HIGH when enabled and cable connected. |+| 12 | T2IN | input | TTL/CMOS driver input for T2OUT; unused driver inputs should be connected to GND or VCC. |+| 13 | T1IN | input | TTL/CMOS driver input for T1OUT; unused driver inputs should be connected to GND or VCC. |+| 14 | ONLINE | input | Apply logic HIGH to override AUTO ON-LINE® circuitry keeping drivers active; SHUTDOWN must also be logic HIGH. |+| 15 | R1OUT | output | TTL/CMOS receiver output, inverted from RS-232 input, disabled by EN pin to high-Z state. |+| 16 | R1IN | input | RS-232 receiver input with -15V to +15V input range and 300mV hysteresis, 5kΩ pull-down resistor to ground. |+| 17 | T1OUT | output | RS-232 Driver output with regulated ±5.0V to ±5.4V swing, protected against continuous short-circuit to ground. |+| 18 | GND | power_in | Ground; return path for all current and reference for logic levels. |+| 19 | VCC | power_in | Supply voltage input, +3.0V to +5.5V; drives internal charge pump for ±5.5V regulated outputs. |+| 20 | SHUTDOWN | input | Apply logic LOW to shut down drivers and charge pump, overriding all AUTO ON-LINE® circuitry and ONLINE pin. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | MaxLinear |+| Package | TSSOP-20 |+| Category | Interface |+| Pins | 20 |++## CAD (KiCad official)++- Symbol: `SP3223EEY-L`+- Footprint: `Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm`+- 3D model: TSSOP-20 (KiCad packages3D, STEP)+- 3D model files: `sp3223eey-l-etched.step` / `sp3223eey-l-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sp3223eey-l.step` / `sp3223eey-l.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [MaxLinear datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586175647634345984) (20 pp, sha256 `59c6e5dfb526c896`, retrieved 2026-09-22, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/sp3223eey-l-datasheet.pdf)
page.jsonadded+213
@@ -0,0 +1,213 @@+{+  "slug": "sp3223eey-l",+  "version": "0.1.0",+  "type": "component",+  "description": "MaxLinear RS232 ICs, TSSOP-20. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "interface",+    "sp3223eey-l",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "sp3223eey-l.kicad_sym",+    "sp3223eey-l.kicad_mod",+    "sp3223eey-l.glb",+    "sp3223eey-l.step",+    "sp3223eey-l.lbr",+    "docs/hero.png",+    "docs/sp3223eey-l-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "SP3223EEY-L",+    "manufacturer": "MaxLinear",+    "package": "TSSOP-20",+    "pin_count": 20,+    "category": "Interface",+    "subcategory": "RS232 ICs",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586175647634345984",+    "parts": {+      "symbol": "sp3223eey-l.kicad_sym",+      "footprint": "sp3223eey-l.kicad_mod",+      "model_3d": "sp3223eey-l-etched.glb",+      "model_3d_plain": "sp3223eey-l.glb",+      "model_3d_step": "sp3223eey-l-etched.step",+      "model_3d_step_plain": "sp3223eey-l.step",+      "lbr": "sp3223eey-l.lbr"+    },+    "distributor_links": {+      "lcsc": "C33330"+    },+    "pins": [+      {+        "number": "1",+        "name": "EN",+        "type": "input",+        "description": "Receiver Enable; apply logic LOW for normal operation, apply logic HIGH to disable receiver outputs to high-Z state."+      },+      {+        "number": "2",+        "name": "C1+",+        "type": "passive",+        "description": "Positive terminal of the voltage doubler charge-pump capacitor, typically 0.1µF for 3.3V operation."+      },+      {+        "number": "3",+        "name": "V+",+        "type": "power_out",+        "description": "Regulated +5.5V output generated by charge pump from single VCC supply."+      },+      {+        "number": "4",+        "name": "C1-",+        "type": "passive",+        "description": "Negative terminal of the voltage doubler charge-pump capacitor, typically 0.1µF for 3.3V operation."+      },+      {+        "number": "5",+        "name": "C2+",+        "type": "passive",+        "description": "Positive terminal of the inverting charge-pump capacitor, typically 0.1µF for 3.3V operation."+      },+      {+        "number": "6",+        "name": "C2-",+        "type": "passive",+        "description": "Negative terminal of the inverting charge-pump capacitor, typically 0.1µF for 3.3V operation."+      },+      {+        "number": "7",+        "name": "V-",+        "type": "power_out",+        "description": "Regulated -5.5V output generated by charge pump from single VCC supply."+      },+      {+        "number": "8",+        "name": "T2OUT",+        "type": "output",+        "description": "RS-232 Driver output with regulated ±5.0V to ±5.4V swing, protected against continuous short-circuit to ground."+      },+      {+        "number": "9",+        "name": "R2IN",+        "type": "input",+        "description": "RS-232 receiver input with -15V to +15V input range and 300mV hysteresis, 5kΩ pull-down resistor to ground."+      },+      {+        "number": "10",+        "name": "R2OUT",+        "type": "output",+        "description": "TTL/CMOS receiver output, inverted from RS-232 input, disabled by EN pin to high-Z state."+      },+      {+        "number": "11",+        "name": "STATUS",+        "type": "output",+        "description": "TTL/CMOS output indicating online and shutdown status; LOW when shutdown, HIGH when enabled and cable connected."+      },+      {+        "number": "12",+        "name": "T2IN",+        "type": "input",+        "description": "TTL/CMOS driver input for T2OUT; unused driver inputs should be connected to GND or VCC."+      },+      {+        "number": "13",+        "name": "T1IN",+        "type": "input",+        "description": "TTL/CMOS driver input for T1OUT; unused driver inputs should be connected to GND or VCC."+      },+      {+        "number": "14",+        "name": "ONLINE",+        "type": "input",+        "description": "Apply logic HIGH to override AUTO ON-LINE® circuitry keeping drivers active; SHUTDOWN must also be logic HIGH."+      },+      {+        "number": "15",+        "name": "R1OUT",+        "type": "output",+        "description": "TTL/CMOS receiver output, inverted from RS-232 input, disabled by EN pin to high-Z state."+      },+      {+        "number": "16",+        "name": "R1IN",+        "type": "input",+        "description": "RS-232 receiver input with -15V to +15V input range and 300mV hysteresis, 5kΩ pull-down resistor to ground."+      },+      {+        "number": "17",+        "name": "T1OUT",+        "type": "output",+        "description": "RS-232 Driver output with regulated ±5.0V to ±5.4V swing, protected against continuous short-circuit to ground."+      },+      {+        "number": "18",+        "name": "GND",+        "type": "power_in",+        "description": "Ground; return path for all current and reference for logic levels."+      },+      {+        "number": "19",+        "name": "VCC",+        "type": "power_in",+        "description": "Supply voltage input, +3.0V to +5.5V; drives internal charge pump for ±5.5V regulated outputs."+      },+      {+        "number": "20",+        "name": "SHUTDOWN",+        "type": "input",+        "description": "Apply logic LOW to shut down drivers and charge pump, overriding all AUTO ON-LINE® circuitry and ONLINE pin."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 20,+        "cost_usd": 0.2168,+        "at": "2026-09-22T06:21:30"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586175647634345984",+        "pages": 20,+        "sha256": "59c6e5dfb526c896",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 20,+        "described": 20,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file