{ "tool": "cswa-check", "when": "2026-10-15T23:04:22Z", "whenEpoch": 1792105462, "target": "adom_drew2", "bridgeVersion": "0.11.2", "solidworks": { "majorVersion": 34, "edition": "connected", "versionSupport": { "lacks": [], "majorVersion": 34, "revision": "34.3.0", "supported": true, "supportedFrom": 2021, "tested": true, "testedOn": [ 2026, 2021 ], "year": 2026 } }, "summary": "8 of 8 CSWA parts within tolerance", "passed": 8, "ran": 8, "skipped": 1, "stopped": null, "allPassed": true, "parts": [ { "id": "cswa-00-lego-2x4", "title": "LEGO 2x4 brick (spec 0: the acceptance brick, not an exam part)", "official": false, "source": "adom/solidworks-bridge issue #1 (Michael, SOLIDWORKS 2021: volumeM3 2.0733615208e-6 from swx_mass_properties); examples/lego-2x4.json", "expected": { "massG": 2.114829, "volumeMm3": 2073.3615208, "tolerancePct": 1.0 }, "material": { "name": "ABS", "densityKgM3": 1020 }, "runScript": { "_hint": "Each step reports what it built. Verify with swx_inspect_bodies (the geometry) or swx_mass_properties (the mass) rather than trusting the step list. This document was created by the bridge, so swx_close_doc {save:false} discards the whole thing safely; swx_save_as puts it on disk. A step that fails stops the script and says which one, leaving what was already built in place.", "_timeoutHint": "ab waits up to 420s for this verb before the request times out. If it's a long operation (cloud open / download / export), DON'T treat a timeout as failure \u2014 the work usually keeps running on the bridge. Poll `swx_status` until it reports done.", "bridgeCreatedDocument": true, "created": null, "doc": { "config": "Default", "dirty": true, "path": "C:/Users/drew/AppData/Local/adom-solidworks-bridge/exports/scratch/Part1-1792105365003.SLDPRT", "title": "Part1-1792105365003.SLDPRT", "type": "part" }, "documentName": "Part1-1792105365003.SLDPRT", "durationMs": 13690, "error": "", "ops": [ "new_part", "new_assembly", "clear_part", "sketch", "sketch_rect", "sketch_circle", "extrude", "cut", "set_material", "set_appearance", "fillet", "chamfer", "shell", "revolve", "revolve_cut", "mirror", "hole", "linear_pattern", "circular_pattern", "set_prop", "save_as", "rebuild", "zoom_fit" ], "output": "{\"_hint\":\"Each step reports what it built. Verify with swx_inspect_bodies (the geometry) or swx_mass_properties (the mass) rather than trusting the step list. This document was created by the bridge, so swx_close_doc {save:false} discards the whole thing safely; swx_save_as puts it on disk. A step that fails stops the script and says which one, leaving what was already built in place.\",\"_timeoutHint\":\"ab waits up to 420s for this verb before the request times out. If it's a long operation (cloud open / download / export), DON'T treat a timeout as failure \u2014 the work usually keeps running on the bridge. Poll `swx_status` until it reports done.\",\"bridgeCreatedDocument\":true,\"created\":null,\"doc\":{\"config\":\"Default\",\"dirty\":true,\"path\":\"C:\\\\Users\\\\drew\\\\AppData\\\\Local\\\\adom-solidworks-bridge\\\\exports\\\\scratch\\\\Part1-1792105365003.SLDPRT\",\"title\":\"Part1-1792105365003.SLDPRT\",\"type\":\"part\"},\"documentName\":\"Part1-1792105365003.SLDPRT\",\"ops\":[\"new_part\",\"new_assembly\",\"clear_part\",\"sketch\",\"sketch_rect\",\"sketch_circle\",\"extrude\",\"cut\",\"set_material\",\"set_appearance\",\"fillet\",\"chamfer\",\"shell\",\"revolve\",\"revolve_cut\",\"mirror\",\"hole\",\"linear_pattern\",\"circular_pattern\",\"set_prop\",\"save_as\",\"rebuild\",\"zoom_fit\"],\"progress\":{\"confidence\":\"estimate\",\"elapsedSec\":12.2,\"estimatedSec\":30,\"etaSec\":0,\"percent\":100,\"phase\":\"run_script\",\"startKind\":\"warm\",\"stepLabel\":\"Running 10 modeling step(s)\"},\"readiness\":{\"basedOn\":[\"alreadyReadyThisSession\"],\"evaluatedAt\":\"gate\",\"readsAllowed\":true,\"ready\":true,\"running\":true,\"state\":\"ready\",\"why\":null},\"solidworksRevision\":\"34.3.0\",\"statusVerb\":\"swx_status\",\"stepCount\":10,\"steps\":[{\"op\":\"clear_part\",\"result\":{\"bodiesLeft\":0,\"cleared\":\"Part1-1792105365003.SLDPRT\",\"deleted\":[],\"featuresDeleted\":0,\"passes\":0,\"proven\":{\"live\":true,\"measuredOn\":[{\"bridge\":\"0.10.6\",\"by\":\"adom\",\"date\":\"2026-10-14\",\"edition\":\"connected\",\"major\":34,\"solidworks\":2026},{\"bridge\":\"0.10.9\",\"by\":\"community\",\"date\":\"2026-10-15\",\"edition\":\"desktop\",\"major\":29,\"solidworks\":2021}],\"variants\":[\"clear_part\"]},\"route\":\"DeleteSelection2(swDelete_Children | swDelete_Absorbed), repeated until the tree is empty\"},\"step\":1},{\"op\":\"sketch_rect\",\"result\":{\"createdPlane\":null,\"entities\":[{\"rect\":{\"cornersMm\":[[-15.9,-7.9],[15.9,7.9]]}}],\"heightMm\":15.8,\"mapped\":false,\"plane\":\"Top Plane\",\"planeFrames\":\"plane transforms (they match the measured Front/Top axes)\",\"proven\":{\"live\":true,\"measuredOn\":[{\"bridge\":\"0.10.3\",\"by\":\"adom\",\"date\":\"2026-10-14\",\"edition\":\"connected\",\"major\":34,\"solidworks\":2026},{\"bridge\":\"0.10.9\",\"by\":\"community\",\"date\":\"2026-10-15\",\"edition\":\"desktop\",\"major\":29,\"solidworks\":2021}],\"variants\":[\"sketch.plane.top\",\"sketch.rect\"]},\"resolvedPlane\":null,\"sketch\":\"Sketch1\",\"sketchNormal\":[0.0,1.0,0.0],\"sketchedOn\":\"Top Plane\",\"transformInverted\":false,\"widthMm\":31.8},\"step\":2},{\"op\":\"extrude\",\"result\":{\"depth2Mm\":null,\"depthMm\":9.6,\"dir\":{\"flippedToFollowTheReference\":false,\"reference\":null,\"sketchNormal\":[0.0,1.0,0.0],\"value\":false},\"direction\":\"one\",\"draftDeg\":null,\"draftInward\":null,\"endCondition\":0,\"feature\":\"Boss-Extrude1\",\"proven\":{\"live\":true,\"measuredOn\":[{\"bridge\":\"0.10.3\",\"by\":\"adom\",\"date\":\"2026-10-14\",\"edition\":\"connected\",\"major\":34,\"solidworks\":2026},{\"bridge\":\"0.10.9\",\"by\":\"community\",\"date\":\"2026-10-15\",\"edition\":\"desktop\",\"major\":29,\"solidworks\":2021}],\"variants\":[\"extrude.one\"]},\"reverse\":false,\"sketch\":\"Sketch1\",\"throughAll\":false,\"upToFace\":null},\"step\":3},{\"op\":\"sketch_rect\",\"result\":{\"createdPlane\":null,\"entities\":[{\"rect\":{\"cornersMm\":[[-14.7,-6.7],[14.7,6.7]]}}],\"heightMm\":13.4,\"mapped\":false,\"plane\":\"Top Plane\",\"planeFrames\":\"plane transforms (they match the measured Front/Top axes)\",\"proven\":{\"live\":true,\"measuredOn\":[{\"bridge\":\"0.10.3\",\"by\":\"adom\",\"date\":\"2026-10-14\",\"edition\":\"connected\",\"major\":34,\"solidworks\":2026},{\"bridge\":\"0.10.9\",\"by\":\"community\",\"date\":\"2026-10-15\",\"edition\":\"desktop\",\"major\":29,\"solidworks\":2021}],\"variants\":[\"sketch.plane.top\",\"sketch.rect\"]},\"resolvedPlane\":null,\"sketch\":\"Sketch2\",\"sketchNormal\":[0.0,1.0,0.0],\"sketchedOn\":\"Top Plane\",\"transformInverted\":false,\"widthMm\":29.4},\"step\":4},{\"op\":\"cut\",\"result\":{\"depth2Mm\":null,\"depthMm\":8.6,\"dir\":{\"flippedToFollowTheReference\":false,\"reference\":null,\"sketchNormal\":[0.0,1.0,0.0],\"value\":true},\"direction\":\"one\",\"draftDeg\":null,\"draftInward\":null,\"endCondition\":0,\"feature\":\"Cut-Extrude1\",\"proven\":{\"live\":true,\"measuredOn\":[{\"bridge\":\"0.10.3\",\"by\":\"adom\",\"date\":\"2026-10-14\",\"edition\":\"connected\",\"major\":34,\"solidworks\":2026},{\"bridge\":\"0.10.9\",\"by\":\"community\",\"date\":\"2026-10-15\",\"edition\":\"desktop\",\"major\":29,\"solidworks\":2021}],\"variants\":[\"cut.one.reversed\"]},\"reverse\":true,\"sketch\":\"Sketch2\",\"throughAll\":false,\"upToFace\":null},\"step\":5},{\"op\":\"sketch\",\"result\":{\"createdPlane\":null,\"entities\":[{\"circle\":{\"centerMm\":[-8.0,0.0],\"radiusMm\":3.255}},{\"circle\":{\"centerMm\":[-8.0,0.0],\"radiusMm\":2.4}},{\"circle\":{\"centerMm\":[0.0,0.0],\"radiusMm\":3.255}},{\"circle\":{\"centerMm\":[0.0,0.0],\"radiusMm\":2.4}},{\"circle\":{\"centerMm\":[8.0,0.0],\"radiusMm\":3.255}},{\"circle\":{\"centerMm\":[8.0,0.0],\"radiusMm\":2.4}}],\"mapped\":false,\"plane\":\"Top Plane\",\"planeFrames\":\"plane transforms (they match the measured Front/Top axes)\",\"proven\":{\"live\":true,\"measuredOn\":[{\"bridge\":\"0.10.3\",\"by\":\"adom\",\"date\":\"2026-10-14\",\"edition\":\"connected\",\"major\":34,\"solidworks\":2026},{\"bridge\":\"0.10.9\",\"by\":\"community\",\"date\":\"2026-10-15\",\"edition\":\"desktop\",\"major\":29,\"solidworks\":2021}],\"variants\":[\"sketch.plane.top\",\"sketch.circle\",\"sketch.multiProfile\"]},\"resolvedPlane\":null,\"sketch\":\"Sketch3\",\"sketchNormal\":[0.0,1.0,0.0],\"sketchedOn\":\"Top Plane\",\"transformInverted\":false},\"step\":6},{\"op\":\"extrude\",\"result\":{\"depth2Mm\":null,\"depthMm\":8.6,\"dir\":{\"flippedToFollowTheReference\":false,\"reference\":null,\"sketchNormal\":[0.0,1.0,0.0],\"value\":false},\"direction\":\"one\",\"draftDeg\":null,\"draftInward\":null,\"endCondition\":0,\"feature\":\"Boss-Extrude2\",\"proven\":{\"live\":true,\"measuredOn\":[{\"bridge\":\"0.10.3\",\"by\":\"adom\",\"date\":\"2026-10-14\",\"edition\":\"connected\",\"major\":34,\"solidworks\":2026},{\"bridge\":\"0.10.9\",\"by\":\"community\",\"date\":\"2026-10-15\",\"edition\":\"desktop\",\"major\":29,\"solidworks\":2021}],\"variants\":[\"extrude.one\"]},\"reverse\":false,\"sketch\":\"Sketch3\",\"throughAll\":false,\"upToFace\":null},\"step\":7},{\"op\":\"sketch\",\"result\":{\"createdPlane\":\"Plane1\",\"entities\":[{\"circle\":{\"centerMm\":[-12.0,-4.0],\"radiusMm\":2.4}},{\"circle\":{\"centerMm\":[-12.0,4.0],\"radiusMm\":2.4}},{\"circle\":{\"centerMm\":[-4.0,-4.0],\"radiusMm\":2.4}},{\"circle\":{\"centerMm\":[-4.0,4.0],\"radiusMm\":2.4}},{\"circle\":{\"centerMm\":[4.0,-4.0],\"radiusMm\":2.4}},{\"circle\":{\"centerMm\":[4.0,4.0],\"radiusMm\":2.4}},{\"circle\":{\"centerMm\":[12.0,-4.0],\"radiusMm\":2.4}},{\"circle\":{\"centerMm\":[12.0,4.0],\"radiusMm\":2.4}}],\"mapped\":true,\"plane\":{\"offsetFrom\":\"Top Plane\",\"offsetMm\":9.6},\"planeFrames\":\"plane transforms (they match the measured Front/Top axes)\",\"proven\":{\"live\":true,\"measuredOn\":[{\"bridge\":\"0.10.3\",\"by\":\"adom\",\"date\":\"2026-10-14\",\"edition\":\"connected\",\"major\":34,\"solidworks\":2026},{\"bridge\":\"0.10.9\",\"by\":\"community\",\"date\":\"2026-10-15\",\"edition\":\"desktop\",\"major\":29,\"solidworks\":2021}],\"variants\":[\"sketch.offset.top.positive\",\"sketch.circle\",\"sketch.multiProfile\"]},\"resolvedPlane\":{\"offsetFrom\":\"Top Plane\",\"offsetMm\":9.6,\"plane\":\"Plane1\",\"verified\":true},\"sketch\":\"Sketch4\",\"sketchNormal\":[0.0,1.0,0.0],\"sketchedOn\":\"Plane1\",\"transformInverted\":false},\"step\":8},{\"op\":\"extrude\",\"result\":{\"depth2Mm\":null,\"depthMm\":1.7,\"dir\":{\"flippedToFollowTheReference\":false,\"reference\":[0.0,1.0,0.0],\"sketchNormal\":[0.0,1.0,0.0],\"value\":false},\"direction\":\"one\",\"draftDeg\":null,\"draftInward\":null,\"endCondition\":0,\"feature\":\"Boss-Extrude3\",\"proven\":{\"live\":true,\"measuredOn\":[{\"bridge\":\"0.10.3\",\"by\":\"adom\",\"date\":\"2026-10-14\",\"edition\":\"connected\",\"major\":34,\"solidworks\":2026},{\"bridge\":\"0.10.9\",\"by\":\"community\",\"date\":\"2026-10-15\",\"edition\":\"desktop\",\"major\":29,\"solidworks\":2021}],\"variants\":[\"extrude.one\"]},\"reverse\":false,\"sketch\":\"Sketch4\",\"throughAll\":false,\"upToFace\":null},\"step\":9},{\"op\":\"set_material\",\"result\":{\"appearanceReapplied\":[],\"current\":{\"database\":\"SOLIDWORKS Materials\",\"name\":\"ABS\"},\"database\":\"SOLIDWORKS Materials.sldmat\",\"densityKgM3\":1020.0,\"densityRequested\":1020.0,\"material\":\"ABS\",\"proven\":{\"live\":false,\"measuredOn\":[],\"unmeasured\":[{\"variant\":\"set_material.density\",\"what\":\"a density in kg/m\u00b3 (the document's own, or checked against the material's)\"}],\"variants\":[\"set_material\",\"set_material.density\"],\"why\":\"not measured live: see `unmeasured` \u2014 verify this step's geometry with swx_inspect_bodies\"}},\"step\":10}],\"success\":true,\"targetDocument\":\"Part1-1792105365003.SLDPRT\",\"timeoutSeconds\":420}", "progress": { "confidence": "estimate", "elapsedSec": 12.2, "estimatedSec": 30, "etaSec": 0, "percent": 100, "phase": "run_script", "startKind": "warm", "stepLabel": "Running 10 modeling step(s)" }, "readiness": { "basedOn": [ "alreadyReadyThisSession" ], "evaluatedAt": "gate", "readsAllowed": true, "ready": true, "running": true, "state": "ready", "why": null }, "schemaVersion": 1, "solidworksRevision": "34.3.0", "status": "ok", "statusVerb": "swx_status", "stepCount": 10, "steps": [ { "op": "clear_part", "result": { "bodiesLeft": 0, "cleared": "Part1-1792105365003.SLDPRT", "deleted": [], "featuresDeleted": 0, "passes": 0, "proven": { "live": true, "measuredOn": [ { "bridge": "0.10.6", "by": "adom", "date": "2026-10-14", "edition": "connected", "major": 34, "solidworks": 2026 }, { "bridge": "0.10.9", "by": "community", "date": "2026-10-15", "edition": "desktop", "major": 29, "solidworks": 2021 } ], "variants": [ "clear_part" ] }, "route": "DeleteSelection2(swDelete_Children | swDelete_Absorbed), repeated until the tree is empty" }, "step": 1 }, { "op": "sketch_rect", "result": { "createdPlane": null, "entities": [ { "rect": { "cornersMm": [ [ -15.9, -7.9 ], [ 15.9, 7.9 ] ] } } ], "heightMm": 15.8, "mapped": false, "plane": "Top Plane", "planeFrames": "plane transforms (they match the measured Front/Top axes)", "proven": { "live": true, "measuredOn": [ { "bridge": "0.10.3", "by": "adom", "date": "2026-10-14", "edition": "connected", "major": 34, "solidworks": 2026 }, { "bridge": "0.10.9", "by": "community", "date": "2026-10-15", "edition": "desktop", "major": 29, "solidworks": 2021 } ], "variants": [ "sketch.plane.top", "sketch.rect" ] }, "resolvedPlane": null, "sketch": "Sketch1", "sketchNormal": [ 0.0, 1.0, 0.0 ], "sketchedOn": "Top Plane", "transformInverted": false, "widthMm": 31.8 }, "step": 2 }, { "op": "extrude", "result": { "depth2Mm": null, "depthMm": 9.6, "dir": { "flippedToFollowTheReference": false, "reference": null, "sketchNormal": [ 0.0, 1.0, 0.0 ], "value": false }, "direction": "one", "draftDeg": null, "draftInward": null, "endCondition": 0, "feature": "Boss-Extrude1", "proven": { "live": true, "measuredOn": [ { "bridge": "0.10.3", "by": "adom", "date": "2026-10-14", "edition": "connected", "major": 34, "solidworks": 2026 }, { "bridge": "0.10.9", "by": "community", "date": "2026-10-15", "edition": "desktop", "major": 29, "solidworks": 2021 } ], "variants": [ "extrude.one" ] }, "reverse": false, "sketch": "Sketch1", "throughAll": false, "upToFace": null }, "step": 3 }, { "op": "sketch_rect", "result": { "createdPlane": null, "entities": [ { "rect": { "cornersMm": [ [ -14.7, -6.7 ], [ 14.7, 6.7 ] ] } } ], "heightMm": 13.4, "mapped": false, "plane": "Top Plane", "planeFrames": "plane transforms (they match the measured Front/Top axes)", "proven": { "live": true, "measuredOn": [ { "bridge": "0.10.3", "by": "adom", "date": "2026-10-14", "edition": "connected", "major": 34, "solidworks": 2026 }, { "bridge": "0.10.9", "by": "community", "date": "2026-10-15", "edition": "desktop", "major": 29, "solidworks": 2021 } ], "variants": [ "sketch.plane.top", "sketch.rect" ] }, "resolvedPlane": null, "sketch": "Sketch2", "sketchNormal": [ 0.0, 1.0, 0.0 ], "sketchedOn": "Top Plane", "transformInverted": false, "widthMm": 29.4 }, "step": 4 }, { "op": "cut", "result": { "depth2Mm": null, "depthMm": 8.6, "dir": { "flippedToFollowTheReference": false, "reference": null, "sketchNormal": [ 0.0, 1.0, 0.0 ], "value": true }, "direction": "one", "draftDeg": null, "draftInward": null, "endCondition": 0, "feature": "Cut-Extrude1", "proven": { "live": true, "measuredOn": [ { "bridge": "0.10.3", "by": "adom", "date": "2026-10-14", "edition": "connected", "major": 34, "solidworks": 2026 }, { "bridge": "0.10.9", "by": "community", "date": "2026-10-15", "edition": "desktop", "major": 29, "solidworks": 2021 } ], "variants": [ "cut.one.reversed" ] }, "reverse": true, "sketch": "Sketch2", "throughAll": false, "upToFace": null }, "step": 5 }, { "op": "sketch", "result": { "createdPlane": null, "entities": [ { "circle": { "centerMm": [ -8.0, 0.0 ], "radiusMm": 3.255 } }, { "circle": { "centerMm": [ -8.0, 0.0 ], "radiusMm": 2.4 } }, { "circle": { "centerMm": [ 0.0, 0.0 ], "radiusMm": 3.255 } }, { "circle": { "centerMm": [ 0.0, 0.0 ], "radiusMm": 2.4 } }, { "circle": { "centerMm": [ 8.0, 0.0 ], "radiusMm": 3.255 } }, { "circle": { "centerMm": [ 8.0, 0.0 ], "radiusMm": 2.4 } } ], "mapped": false, "plane": "Top Plane", "planeFrames": "plane transforms (they match the measured Front/Top axes)", "proven": { "live": true, "measuredOn": [ { "bridge": "0.10.3", "by": "adom", "date": "2026-10-14", "edition": "connected", "major": 34, "solidworks": 2026 }, { "bridge": "0.10.9", "by": "community", "date": "2026-10-15", "edition": "desktop", "major": 29, "solidworks": 2021 } ], "variants": [ "sketch.plane.top", "sketch.circle", "sketch.multiProfile" ] }, "resolvedPlane": null, "sketch": "Sketch3", "sketchNormal": [ 0.0, 1.0, 0.0 ], "sketchedOn": "Top Plane", "transformInverted": false }, "step": 6 }, { "op": "extrude", "result": { "depth2Mm": null, "depthMm": 8.6, "dir": { "flippedToFollowTheReference": false, "reference": null, "sketchNormal": [ 0.0, 1.0, 0.0 ], "value": false }, "direction": "one", "draftDeg": null, "draftInward": null, "endCondition": 0, "feature": "Boss-Extrude2", "proven": { "live": true, "measuredOn": [ { "bridge": "0.10.3", "by": "adom", "date": "2026-10-14", "edition": "connected", "major": 34, "solidworks": 2026 }, { "bridge": "0.10.9", "by": "community", "date": "2026-10-15", "edition": "desktop", "major": 29, "solidworks": 2021 } ], "variants": [ "extrude.one" ] }, "reverse": false, "sketch": "Sketch3", "throughAll": false, "upToFace": null }, "step": 7 }, { "op": "sketch", "result": { "createdPlane": "Plane1", "entities": [ { "circle": { "centerMm": [ -12.0, -4.0 ], "radiusMm": 2.4 } }, { "circle": { "centerMm": [ -12.0, 4.0 ], "radiusMm": 2.4 } }, { "circle": { "centerMm": [ -4.0, -4.0 ], "radiusMm": 2.4 } }, { "circle": { "centerMm": [ -4.0, 4.0 ], "radiusMm": 2.4 } }, { "circle": { "centerMm": [ 4.0, -4.0 ], "radiusMm": 2.4 } }, { "circle": { "centerMm": [ 4.0, 4.0 ], "radiusMm": 2.4 } }, { "circle": { "centerMm": [ 12.0, -4.0 ], "radiusMm": 2.4 } }, { "circle": { "centerMm": [ 12.0, 4.0 ], "radiusMm": 2.4 } } ], "mapped": true, "plane": { "offsetFrom": "Top Plane", "offsetMm": 9.6 }, "planeFrames": "plane transforms (they match the measured Front/Top axes)", "proven": { "live": true, "measuredOn": [ { "bridge": "0.10.3", "by": "adom", "date": "2026-10-14", "edition": "connected", "major": 34, "solidworks": 2026 }, { "bridge": "0.10.9", "by": "community", "date": "2026-10-15", "edition": "desktop", "major": 29, "solidworks": 2021 } ], "variants": [ "sketch.offset.top.positive", "sketch.circle", "sketch.multiProfile" ] }, "resolvedPlane": { "offsetFrom": "Top Plane", "offsetMm": 9.6, "plane": "Plane1", "verified": true }, "sketch": "Sketch4", "sketchNormal": [ 0.0, 1.0, 0.0 ], "sketchedOn": "Plane1", "transformInverted": false }, "step": 8 }, { "op": "extrude", "result": { "depth2Mm": null, "depthMm": 1.7, "dir": { "flippedToFollowTheReference": false, "reference": [ 0.0, 1.0, 0.0 ], "sketchNormal": [ 0.0, 1.0, 0.0 ], "value": false }, "direction": "one", "draftDeg": null, "draftInward": null, "endCondition": 0, "feature": "Boss-Extrude3", "proven": { "live": true, "measuredOn": [ { "bridge": "0.10.3", "by": "adom", "date": "2026-10-14", "edition": "connected", "major": 34, "solidworks": 2026 }, { "bridge": "0.10.9", "by": "community", "date": "2026-10-15", "edition": "desktop", "major": 29, "solidworks": 2021 } ], "variants": [ "extrude.one" ] }, "reverse": false, "sketch": "Sketch4", "throughAll": false, "upToFace": null }, "step": 9 }, { "op": "set_material", "result": { "appearanceReapplied": [], "current": { "database": "SOLIDWORKS Materials", "name": "ABS" }, "database": "SOLIDWORKS Materials.sldmat", "densityKgM3": 1020.0, "densityRequested": 1020.0, "material": "ABS", "proven": { "live": false, "measuredOn": [], "unmeasured": [ { "variant": "set_material.density", "what": "a density in kg/m\u00b3 (the document's own, or checked against the material's)" } ], "variants": [ "set_material", "set_material.density" ], "why": "not measured live: see `unmeasured` \u2014 verify this step's geometry with swx_inspect_bodies" } }, "step": 10 } ], "success": true, "targetDocument": "Part1-1792105365003.SLDPRT", "timeoutSeconds": 420 }, "massProperties": { "_hint": "SI units: kg, m^3, m^2, m. Mass is only as good as the material assignment \u2014 a 0 or default density means no material is set on the model, so report the density alongside the mass.", "_timeoutHint": "ab waits up to 120s for this verb before the request times out. If it's a long operation (cloud open / download / export), DON'T treat a timeout as failure \u2014 the work usually keeps running on the bridge. Poll `swx_status` until it reports done.", "boundingBox": [ -0.0159, 0.0, -0.0079, 0.0159, 0.0113, 0.0079 ], "centerOfMass": [ 3.4214491115036863e-19, 0.006193169977140961, -1.994781431613623e-19 ], "centerOfMassMm": [ 0.0, 6.19317, -0.0 ], "density": 1020.0, "densityKgM3": 1020.0, "doc": { "config": "Default", "dirty": true, "path": "C:/Users/drew/AppData/Local/adom-solidworks-bridge/exports/scratch/Part1-1792105365003.SLDPRT", "title": "Part1-1792105365003.SLDPRT", "type": "part" }, "durationMs": 1047, "error": "", "massG": 2.114828751242137, "massKg": 0.002114828751242137, "materialName": "ABS", "output": "{\"_hint\":\"SI units: kg, m^3, m^2, m. Mass is only as good as the material assignment \u2014 a 0 or default density means no material is set on the model, so report the density alongside the mass.\",\"_timeoutHint\":\"ab waits up to 120s for this verb before the request times out. If it's a long operation (cloud open / download / export), DON'T treat a timeout as failure \u2014 the work usually keeps running on the bridge. Poll `swx_status` until it reports done.\",\"boundingBox\":[-0.0159,0.0,-0.0079,0.0159,0.0113,0.0079],\"centerOfMass\":[3.4214491115036863e-19,0.006193169977140961,-1.994781431613623e-19],\"centerOfMassMm\":[0.0,6.19317,-0.0],\"density\":1020.0,\"densityKgM3\":1020.0,\"doc\":{\"config\":\"Default\",\"dirty\":true,\"path\":\"C:\\\\Users\\\\drew\\\\AppData\\\\Local\\\\adom-solidworks-bridge\\\\exports\\\\scratch\\\\Part1-1792105365003.SLDPRT\",\"title\":\"Part1-1792105365003.SLDPRT\",\"type\":\"part\"},\"massG\":2.114828751242137,\"massKg\":0.002114828751242137,\"materialName\":\"ABS\",\"readiness\":{\"basedOn\":[\"alreadyReadyThisSession\"],\"evaluatedAt\":\"gate\",\"readsAllowed\":true,\"ready\":true,\"running\":true,\"state\":\"ready\",\"why\":null},\"statusVerb\":\"swx_status\",\"success\":true,\"surfaceAreaM2\":0.003776753621558533,\"surfaceAreaMm2\":3776.753621558533,\"timeoutSeconds\":120,\"volumeM3\":2.0733615208256247e-6,\"volumeMm3\":2073.3615208256247}", "readiness": { "basedOn": [ "alreadyReadyThisSession" ], "evaluatedAt": "gate", "readsAllowed": true, "ready": true, "running": true, "state": "ready", "why": null }, "schemaVersion": 1, "status": "ok", "statusVerb": "swx_status", "success": true, "surfaceAreaM2": 0.003776753621558533, "surfaceAreaMm2": 3776.753621558533, "timeoutSeconds": 120, "volumeM3": 2.0733615208256247e-06, "volumeMm3": 2073.3615208256247 }, "pass": true, "checks": [ { "quantity": "massG", "expected": 2.114829, "measured": 2.114828751242137, "offPct": 1.1762552090642981e-05, "pass": true }, { "quantity": "volumeMm3", "expected": 2073.3615208, "measured": 2073.3615208256247, "offPct": 1.2358943781890103e-09, "pass": true } ], "fails": [], "seconds": 14.7 }, { "id": "cswa-01-3dengr-q5-block", "title": "3dengr Q5: a 100 x 20 x 60 block in 6061", "official": false, "source": "https://www.3dengr.com/cswa-practice-questions.html", "expected": { "massG": 324.0, "volumeMm3": 120000.0, "centerOfMassMm": [ 50.0, 10.0, 30.0 ], "tolerancePct": 1.0 }, "material": { "name": "6061 Alloy", "densityKgM3": 2700 }, "runScript": { "_hint": "Each step reports what it built. Verify with swx_inspect_bodies (the geometry) or swx_mass_properties (the mass) rather than trusting the step list. This document was created by the bridge, so swx_close_doc {save:false} discards the whole thing safely; swx_save_as puts it on disk. A step that fails stops the script and says which one, leaving what was already built in place.", "_timeoutHint": "ab waits up to 420s for this verb before the request times out. If it's a long operation (cloud open / download / export), DON'T treat a timeout as failure \u2014 the work usually keeps running on the bridge. Poll `swx_status` until it reports done.", "bridgeCreatedDocument": true, "created": null, "doc": { "config": "Default", "dirty": true, "path": "C:/Users/drew/AppData/Local/adom-solidworks-bridge/exports/scratch/Part1-1792105365003.SLDPRT", "title": "Part1-1792105365003.SLDPRT", "type": "part" }, "documentName": "Part1-1792105365003.SLDPRT", "durationMs": 8044, "error": "", "ops": [ "new_part", "new_assembly", "clear_part", "sketch", "sketch_rect", "sketch_circle", "extrude", "cut", "set_material", "set_appearance", "fillet", "chamfer", "shell", "revolve", "revolve_cut", "mirror", "hole", "linear_pattern", "circular_pattern", "set_prop", "save_as", "rebuild", "zoom_fit" ], "output": "{\"_hint\":\"Each step reports what it built. Verify with swx_inspect_bodies (the geometry) or swx_mass_properties (the mass) rather than trusting the step list. This document was created by the bridge, so swx_close_doc {save:false} discards the whole thing safely; swx_save_as puts it on disk. A step that fails stops the script and says which one, leaving what was already built in place.\",\"_timeoutHint\":\"ab waits up to 420s for this verb before the request times out. If it's a long operation (cloud open / download / export), DON'T treat a timeout as failure \u2014 the work usually keeps running on the bridge. Poll `swx_status` until it reports done.\",\"bridgeCreatedDocument\":true,\"created\":null,\"doc\":{\"config\":\"Default\",\"dirty\":true,\"path\":\"C:\\\\Users\\\\drew\\\\AppData\\\\Local\\\\adom-solidworks-bridge\\\\exports\\\\scratch\\\\Part1-1792105365003.SLDPRT\",\"title\":\"Part1-1792105365003.SLDPRT\",\"type\":\"part\"},\"documentName\":\"Part1-1792105365003.SLDPRT\",\"ops\":[\"new_part\",\"new_assembly\",\"clear_part\",\"sketch\",\"sketch_rect\",\"sketch_circle\",\"extrude\",\"cut\",\"set_material\",\"set_appearance\",\"fillet\",\"chamfer\",\"shell\",\"revolve\",\"revolve_cut\",\"mirror\",\"hole\",\"linear_pattern\",\"circular_pattern\",\"set_prop\",\"save_as\",\"rebuild\",\"zoom_fit\"],\"progress\":{\"confidence\":\"estimate\",\"elapsedSec\":6.5,\"estimatedSec\":30,\"etaSec\":0,\"percent\":100,\"phase\":\"run_script\",\"startKind\":\"warm\",\"stepLabel\":\"Running 4 modeling step(s)\"},\"readiness\":{\"basedOn\":[\"alreadyReadyThisSession\"],\"evaluatedAt\":\"gate\",\"readsAllowed\":true,\"ready\":true,\"running\":true,\"state\":\"ready\",\"why\":null},\"solidworksRevision\":\"34.3.0\",\"statusVerb\":\"swx_status\",\"stepCount\":4,\"steps\":[{\"op\":\"clear_part\",\"result\":{\"bodiesLeft\":0,\"cleared\":\"Part1-1792105365003.SLDPRT\",\"deleted\":[\"Sketch1\",\"Boss-Extrude1\",\"Cut-Extrude1\",\"Boss-Extrude2\",\"Plane1\",\"Sketch4\",\"Boss-Extrude3\",\"Sketch2\",\"Sketch3\"],\"featuresDeleted\":9,\"passes\":2,\"proven\":{\"live\":true,\"measuredOn\":[{\"bridge\":\"0.10.6\",\"by\":\"adom\",\"date\":\"2026-10-14\",\"edition\":\"connected\",\"major\":34,\"solidworks\":2026},{\"bridge\":\"0.10.9\",\"by\":\"community\",\"date\":\"2026-10-15\",\"edition\":\"desktop\",\"major\":29,\"solidworks\":2021}],\"variants\":[\"clear_part\"]},\"route\":\"DeleteSelection2(swDelete_Children | swDelete_Absorbed), repeated until the tree is empty\"},\"step\":1},{\"op\":\"sketch_rect\",\"result\":{\"createdPlane\":null,\"entities\":[{\"rect\":{\"cornersMm\":[[0.0,0.0],[100.0,20.0]]}}],\"heightMm\":20.0,\"mapped\":false,\"plane\":\"Front Plane\",\"planeFrames\":\"plane transforms (they match the measured Front/Top axes)\",\"proven\":{\"live\":true,\"measuredOn\":[{\"bridge\":\"0.10.3\",\"by\":\"adom\",\"date\":\"2026-10-14\",\"edition\":\"connected\",\"major\":34,\"solidworks\":2026},{\"bridge\":\"0.10.9\",\"by\":\"community\",\"date\":\"2026-10-15\",\"edition\":\"desktop\",\"major\":29,\"solidworks\":2021}],\"variants\":[\"sketch.plane.front\",\"sketch.rect\"]},\"resolvedPlane\":null,\"sketch\":\"Sketch5\",\"sketchNormal\":[0.0,0.0,1.0],\"sketchedOn\":\"Front Plane\",\"transformInverted\":false,\"widthMm\":100.0},\"step\":2},{\"op\":\"extrude\",\"result\":{\"depth2Mm\":null,\"depthMm\":60.0,\"dir\":{\"flippedToFollowTheReference\":false,\"reference\":null,\"sketchNormal\":[0.0,0.0,1.0],\"value\":false},\"direction\":\"one\",\"draftDeg\":null,\"draftInward\":null,\"endCondition\":0,\"feature\":\"Boss-Extrude4\",\"proven\":{\"live\":true,\"measuredOn\":[{\"bridge\":\"0.10.3\",\"by\":\"adom\",\"date\":\"2026-10-14\",\"edition\":\"connected\",\"major\":34,\"solidworks\":2026},{\"bridge\":\"0.10.9\",\"by\":\"community\",\"date\":\"2026-10-15\",\"edition\":\"desktop\",\"major\":29,\"solidworks\":2021}],\"variants\":[\"extrude.one\"]},\"reverse\":false,\"sketch\":\"Sketch5\",\"throughAll\":false,\"upToFace\":null},\"step\":3},{\"op\":\"set_material\",\"result\":{\"appearanceReapplied\":[],\"current\":{\"database\":\"SOLIDWORKS Materials\",\"name\":\"6061 Alloy\"},\"database\":\"SOLIDWORKS Materials.sldmat\",\"densityKgM3\":2700.0,\"densityRequested\":2700.0,\"material\":\"6061 Alloy\",\"proven\":{\"live\":false,\"measuredOn\":[],\"unmeasured\":[{\"variant\":\"set_material.density\",\"what\":\"a density in kg/m\u00b3 (the document's own, or checked against the material's)\"}],\"variants\":[\"set_material\",\"set_material.density\"],\"why\":\"not measured live: see `unmeasured` \u2014 verify this step's geometry with swx_inspect_bodies\"}},\"step\":4}],\"success\":true,\"targetDocument\":\"Part1-1792105365003.SLDPRT\",\"timeoutSeconds\":420}", "progress": { "confidence": "estimate", "elapsedSec": 6.5, "estimatedSec": 30, "etaSec": 0, "percent": 100, "phase": "run_script", "startKind": "warm", "stepLabel": "Running 4 modeling step(s)" }, "readiness": { "basedOn": [ "alreadyReadyThisSession" ], "evaluatedAt": "gate", "readsAllowed": true, "ready": true, "running": true, "state": "ready", "why": null }, "schemaVersion": 1, "solidworksRevision": "34.3.0", "status": "ok", "statusVerb": "swx_status", "stepCount": 4, "steps": [ { "op": "clear_part", "result": { "bodiesLeft": 0, "cleared": "Part1-1792105365003.SLDPRT", "deleted": [ "Sketch1", "Boss-Extrude1", "Cut-Extrude1", "Boss-Extrude2", "Plane1", "Sketch4", "Boss-Extrude3", "Sketch2", "Sketch3" ], "featuresDeleted": 9, "passes": 2, "proven": { "live": true, "measuredOn": [ { "bridge": "0.10.6", "by": "adom", "date": "2026-10-14", "edition": "connected", "major": 34, "solidworks": 2026 }, { "bridge": "0.10.9", "by": "community", "date": "2026-10-15", "edition": "desktop", "major": 29, "solidworks": 2021 } ], "variants": [ "clear_part" ] }, "route": "DeleteSelection2(swDelete_Children | swDelete_Absorbed), repeated until the tree is empty" }, "step": 1 }, { "op": "sketch_rect", "result": { "createdPlane": null, "entities": [ { "rect": { "cornersMm": [ [ 0.0, 0.0 ], [ 100.0, 20.0 ] ] } } ], "heightMm": 20.0, "mapped": false, "plane": "Front Plane", "planeFrames": "plane transforms (they match the measured Front/Top axes)", "proven": { "live": true, "measuredOn": [ { "bridge": "0.10.3", "by": "adom", "date": "2026-10-14", "edition": "connected", "major": 34, "solidworks": 2026 }, { "bridge": "0.10.9", "by": "community", "date": "2026-10-15", "edition": "desktop", "major": 29, "solidworks": 2021 } ], "variants": [ "sketch.plane.front", "sketch.rect" ] }, "resolvedPlane": null, "sketch": "Sketch5", "sketchNormal": [ 0.0, 0.0, 1.0 ], "sketchedOn": "Front Plane", "transformInverted": false, "widthMm": 100.0 }, "step": 2 }, { "op": "extrude", "result": { "depth2Mm": null, "depthMm": 60.0, "dir": { "flippedToFollowTheReference": false, "reference": null, "sketchNormal": [ 0.0, 0.0, 1.0 ], "value": false }, "direction": "one", "draftDeg": null, "draftInward": null, "endCondition": 0, "feature": "Boss-Extrude4", "proven": { "live": true, "measuredOn": [ { "bridge": "0.10.3", "by": "adom", "date": "2026-10-14", "edition": "connected", "major": 34, "solidworks": 2026 }, { "bridge": "0.10.9", "by": "community", "date": "2026-10-15", "edition": "desktop", "major": 29, "solidworks": 2021 } ], "variants": [ "extrude.one" ] }, "reverse": false, "sketch": "Sketch5", "throughAll": false, "upToFace": null }, "step": 3 }, { "op": "set_material", "result": { "appearanceReapplied": [], "current": { "database": "SOLIDWORKS Materials", "name": "6061 Alloy" }, "database": "SOLIDWORKS Materials.sldmat", "densityKgM3": 2700.0, "densityRequested": 2700.0, "material": "6061 Alloy", "proven": { "live": false, "measuredOn": [], "unmeasured": [ { "variant": "set_material.density", "what": "a density in kg/m\u00b3 (the document's own, or checked against the material's)" } ], "variants": [ "set_material", "set_material.density" ], "why": "not measured live: see `unmeasured` \u2014 verify this step's geometry with swx_inspect_bodies" } }, "step": 4 } ], "success": true, "targetDocument": "Part1-1792105365003.SLDPRT", "timeoutSeconds": 420 }, "massProperties": { "_hint": "SI units: kg, m^3, m^2, m. Mass is only as good as the material assignment \u2014 a 0 or default density means no material is set on the model, so report the density alongside the mass.", "_timeoutHint": "ab waits up to 120s for this verb before the request times out. If it's a long operation (cloud open / download / export), DON'T treat a timeout as failure \u2014 the work usually keeps running on the bridge. Poll `swx_status` until it reports done.", "boundingBox": [ 0.0, 0.0, 0.0, 0.1, 0.02, 0.06 ], "centerOfMass": [ 0.05, 0.01, 0.03 ], "centerOfMassMm": [ 50.0, 10.0, 30.0 ], "density": 2700.0, "densityKgM3": 2700.0, "doc": { "config": "Default", "dirty": true, "path": "C:/Users/drew/AppData/Local/adom-solidworks-bridge/exports/scratch/Part1-1792105365003.SLDPRT", "title": "Part1-1792105365003.SLDPRT", "type": "part" }, "durationMs": 1377, "error": "", "massG": 323.99999999999994, "massKg": 0.32399999999999995, "materialName": "6061 Alloy", "output": "{\"_hint\":\"SI units: kg, m^3, m^2, m. Mass is only as good as the material assignment \u2014 a 0 or default density means no material is set on the model, so report the density alongside the mass.\",\"_timeoutHint\":\"ab waits up to 120s for this verb before the request times out. If it's a long operation (cloud open / download / export), DON'T treat a timeout as failure \u2014 the work usually keeps running on the bridge. Poll `swx_status` until it reports done.\",\"boundingBox\":[0.0,0.0,0.0,0.1,0.02,0.06],\"centerOfMass\":[0.05,0.01,0.03],\"centerOfMassMm\":[50.0,10.0,30.0],\"density\":2700.0,\"densityKgM3\":2700.0,\"doc\":{\"config\":\"Default\",\"dirty\":true,\"path\":\"C:\\\\Users\\\\drew\\\\AppData\\\\Local\\\\adom-solidworks-bridge\\\\exports\\\\scratch\\\\Part1-1792105365003.SLDPRT\",\"title\":\"Part1-1792105365003.SLDPRT\",\"type\":\"part\"},\"massG\":323.99999999999994,\"massKg\":0.32399999999999995,\"materialName\":\"6061 Alloy\",\"readiness\":{\"basedOn\":[\"alreadyReadyThisSession\"],\"evaluatedAt\":\"gate\",\"readsAllowed\":true,\"ready\":true,\"running\":true,\"state\":\"ready\",\"why\":null},\"statusVerb\":\"swx_status\",\"success\":true,\"surfaceAreaM2\":0.0184,\"surfaceAreaMm2\":18400.0,\"timeoutSeconds\":120,\"volumeM3\":0.00012,\"volumeMm3\":120000.0}", "readiness": { "basedOn": [ "alreadyReadyThisSession" ], "evaluatedAt": "gate", "readsAllowed": true, "ready": true, "running": true, "state": "ready", "why": null }, "schemaVersion": 1, "status": "ok", "statusVerb": "swx_status", "success": true, "surfaceAreaM2": 0.0184, "surfaceAreaMm2": 18400.0, "timeoutSeconds": 120, "volumeM3": 0.00012, "volumeMm3": 120000.0 }, "pass": true, "checks": [ { "quantity": "massG", "expected": 324.0, "measured": 323.99999999999994, "offPct": 1.75442650804963e-14, "pass": true }, { "quantity": "volumeMm3", "expected": 120000.0, "measured": 120000.0, "offPct": 0.0, "pass": true }, { "quantity": "centerOfMassMm", "expected": [ 50.0, 10.0, 30.0 ], "measured": [ 50.0, 10.0, 30.0 ], "pass": true } ], "fails": [], "seconds": 9.4 }, { "id": "cswa-02-3dengr-q6-hole", "title": "3dengr Q6/Q7: the block with a \u00d820 hole through it along Y at X 25, Z 30", "official": false, "source": "https://www.3dengr.com/cswa-practice-questions.html", "expected": { "massG": 307.04, "centerOfMassMm": [ 51.38, 10.0, 30.0 ], "tolerancePct": 1.0 }, "material": { "name": "6061 Alloy", "densityKgM3": 2700 }, "runScript": { "_hint": "Each step reports what it built. Verify with swx_inspect_bodies (the geometry) or swx_mass_properties (the mass) rather than trusting the step list. This document was created by the bridge, so swx_close_doc {save:false} discards the whole thing safely; swx_save_as puts it on disk. A step that fails stops the script and says which one, leaving what was already built in place.", "_timeoutHint": "ab waits up to 420s for this verb before the request times out. If it's a long operation (cloud open / download / export), DON'T treat a timeout as failure \u2014 the work usually keeps running on the bridge. Poll `swx_status` until it reports done.", "bridgeCreatedDocument": true, "created": null, "doc": { "config": "Default", "dirty": true, "path": "C:/Users/drew/AppData/Local/adom-solidworks-bridge/exports/scratch/Part1-1792105365003.SLDPRT", "title": "Part1-1792105365003.SLDPRT", "type": "part" }, "documentName": "Part1-1792105365003.SLDPRT", "durationMs": 10254, "error": "", "ops": [ "new_part", "new_assembly", "clear_part", "sketch", "sketch_rect", "sketch_circle", "extrude", "cut", "set_material", "set_appearance", "fillet", "chamfer", "shell", "revolve", "revolve_cut", "mirror", "hole", "linear_pattern", "circular_pattern", "set_prop", "save_as", "rebuild", "zoom_fit" ], "output": "{\"_hint\":\"Each step reports what it built. Verify with swx_inspect_bodies (the geometry) or swx_mass_properties (the mass) rather than trusting the step list. This document was created by the bridge, so swx_close_doc {save:false} discards the whole thing safely; swx_save_as puts it on disk. A step that fails stops the script and says which one, leaving what was already built in place.\",\"_timeoutHint\":\"ab waits up to 420s for this verb before the request times out. If it's a long operation (cloud open / download / export), DON'T treat a timeout as failure \u2014 the work usually keeps running on the bridge. Poll `swx_status` until it reports done.\",\"bridgeCreatedDocument\":true,\"created\":null,\"doc\":{\"config\":\"Default\",\"dirty\":true,\"path\":\"C:\\\\Users\\\\drew\\\\AppData\\\\Local\\\\adom-solidworks-bridge\\\\exports\\\\scratch\\\\Part1-1792105365003.SLDPRT\",\"title\":\"Part1-1792105365003.SLDPRT\",\"type\":\"part\"},\"documentName\":\"Part1-1792105365003.SLDPRT\",\"ops\":[\"new_part\",\"new_assembly\",\"clear_part\",\"sketch\",\"sketch_rect\",\"sketch_circle\",\"extrude\",\"cut\",\"set_material\",\"set_appearance\",\"fillet\",\"chamfer\",\"shell\",\"revolve\",\"revolve_cut\",\"mirror\",\"hole\",\"linear_pattern\",\"circular_pattern\",\"set_prop\",\"save_as\",\"rebuild\",\"zoom_fit\"],\"progress\":{\"confidence\":\"estimate\",\"elapsedSec\":8.2,\"estimatedSec\":30,\"etaSec\":0,\"percent\":100,\"phase\":\"run_script\",\"startKind\":\"warm\",\"stepLabel\":\"Running 5 modeling step(s)\"},\"readiness\":{\"basedOn\":[\"alreadyReadyThisSession\"],\"evaluatedAt\":\"gate\",\"readsAllowed\":true,\"ready\":true,\"running\":true,\"state\":\"ready\",\"why\":null},\"solidworksRevision\":\"34.3.0\",\"statusVerb\":\"swx_status\",\"stepCount\":5,\"steps\":[{\"op\":\"clear_part\",\"result\":{\"bodiesLeft\":0,\"cleared\":\"Part1-1792105365003.SLDPRT\",\"deleted\":[\"Sketch5\",\"Boss-Extrude4\"],\"featuresDeleted\":2,\"passes\":1,\"proven\":{\"live\":true,\"measuredOn\":[{\"bridge\":\"0.10.6\",\"by\":\"adom\",\"date\":\"2026-10-14\",\"edition\":\"connected\",\"major\":34,\"solidworks\":2026},{\"bridge\":\"0.10.9\",\"by\":\"community\",\"date\":\"2026-10-15\",\"edition\":\"desktop\",\"major\":29,\"solidworks\":2021}],\"variants\":[\"clear_part\"]},\"route\":\"DeleteSelection2(swDelete_Children | swDelete_Absorbed), repeated until the tree is empty\"},\"step\":1},{\"op\":\"sketch_rect\",\"result\":{\"createdPlane\":null,\"entities\":[{\"rect\":{\"cornersMm\":[[0.0,0.0],[100.0,20.0]]}}],\"heightMm\":20.0,\"mapped\":false,\"plane\":\"Front Plane\",\"planeFrames\":\"plane transforms (they match the measured Front/Top axes)\",\"proven\":{\"live\":true,\"measuredOn\":[{\"bridge\":\"0.10.3\",\"by\":\"adom\",\"date\":\"2026-10-14\",\"edition\":\"connected\",\"major\":34,\"solidworks\":2026},{\"bridge\":\"0.10.9\",\"by\":\"community\",\"date\":\"2026-10-15\",\"edition\":\"desktop\",\"major\":29,\"solidworks\":2021}],\"variants\":[\"sketch.plane.front\",\"sketch.rect\"]},\"resolvedPlane\":null,\"sketch\":\"Sketch6\",\"sketchNormal\":[0.0,0.0,1.0],\"sketchedOn\":\"Front Plane\",\"transformInverted\":false,\"widthMm\":100.0},\"step\":2},{\"op\":\"extrude\",\"result\":{\"depth2Mm\":null,\"depthMm\":60.0,\"dir\":{\"flippedToFollowTheReference\":false,\"reference\":null,\"sketchNormal\":[0.0,0.0,1.0],\"value\":false},\"direction\":\"one\",\"draftDeg\":null,\"draftInward\":null,\"endCondition\":0,\"feature\":\"Boss-Extrude5\",\"proven\":{\"live\":true,\"measuredOn\":[{\"bridge\":\"0.10.3\",\"by\":\"adom\",\"date\":\"2026-10-14\",\"edition\":\"connected\",\"major\":34,\"solidworks\":2026},{\"bridge\":\"0.10.9\",\"by\":\"community\",\"date\":\"2026-10-15\",\"edition\":\"desktop\",\"major\":29,\"solidworks\":2021}],\"variants\":[\"extrude.one\"]},\"reverse\":false,\"sketch\":\"Sketch6\",\"throughAll\":false,\"upToFace\":null},\"step\":3},{\"op\":\"hole\",\"result\":{\"depthMm\":null,\"diameterMm\":20.0,\"face\":{\"atPointMm\":[25.0,20.0,30.0],\"heightMm\":20.0,\"normal\":[-0.0,1.0,-0.0],\"pickedBy\":\"geometry\",\"plane\":\"Top Plane\"},\"feature\":\"Cut-Extrude2\",\"features\":[\"Cut-Extrude2\"],\"proven\":{\"live\":false,\"measuredOn\":[],\"unmeasured\":[{\"variant\":\"hole.simple\",\"what\":\"a plain hole: a circle on the face's plane, cut blind or through all\"}],\"variants\":[\"hole.simple\"],\"why\":\"not measured live: see `unmeasured` \u2014 verify this step's geometry with swx_inspect_bodies\"},\"steps\":[{\"op\":\"sketch\",\"result\":{\"createdPlane\":\"Plane2\",\"entities\":[{\"circle\":{\"centerMm\":[25.0,-30.0],\"radiusMm\":10.0}}],\"mapped\":true,\"plane\":{\"offsetFrom\":\"Top Plane\",\"offsetMm\":20.0},\"planeFrames\":\"plane transforms (they match the measured Front/Top axes)\",\"radiusMm\":10.0,\"resolvedPlane\":{\"offsetFrom\":\"Top Plane\",\"offsetMm\":20.0,\"plane\":\"Plane2\",\"verified\":true},\"sketch\":\"Sketch7\",\"sketchNormal\":[0.0,1.0,0.0],\"sketchedOn\":\"Plane2\",\"transformInverted\":false}},{\"op\":\"cut\",\"result\":{\"depth2Mm\":null,\"depthMm\":0.0,\"dir\":{\"flippedToFollowTheReference\":false,\"reference\":[0.0,1.0,0.0],\"sketchNormal\":[0.0,1.0,0.0],\"value\":false},\"direction\":\"one\",\"draftDeg\":null,\"draftInward\":null,\"endCondition\":1,\"feature\":\"Cut-Extrude2\",\"reverse\":false,\"sketch\":\"Sketch7\",\"throughAll\":true,\"upToFace\":null}}],\"throughAll\":true},\"step\":4},{\"op\":\"set_material\",\"result\":{\"appearanceReapplied\":[],\"current\":{\"database\":\"SOLIDWORKS Materials\",\"name\":\"6061 Alloy\"},\"database\":\"SOLIDWORKS Materials.sldmat\",\"densityKgM3\":2700.0,\"densityRequested\":2700.0,\"material\":\"6061 Alloy\",\"proven\":{\"live\":false,\"measuredOn\":[],\"unmeasured\":[{\"variant\":\"set_material.density\",\"what\":\"a density in kg/m\u00b3 (the document's own, or checked against the material's)\"}],\"variants\":[\"set_material\",\"set_material.density\"],\"why\":\"not measured live: see `unmeasured` \u2014 verify this step's geometry with swx_inspect_bodies\"}},\"step\":5}],\"success\":true,\"targetDocument\":\"Part1-1792105365003.SLDPRT\",\"timeoutSeconds\":420}", "progress": { "confidence": "estimate", "elapsedSec": 8.2, "estimatedSec": 30, "etaSec": 0, "percent": 100, "phase": "run_script", "startKind": "warm", "stepLabel": "Running 5 modeling step(s)" }, "readiness": { "basedOn": [ "alreadyReadyThisSession" ], "evaluatedAt": "gate", "readsAllowed": true, "ready": true, "running": true, "state": "ready", "why": null }, "schemaVersion": 1, "solidworksRevision": "34.3.0", "status": "ok", "statusVerb": "swx_status", "stepCount": 5, "steps": [ { "op": "clear_part", "result": { "bodiesLeft": 0, "cleared": "Part1-1792105365003.SLDPRT", "deleted": [ "Sketch5", "Boss-Extrude4" ], "featuresDeleted": 2, "passes": 1, "proven": { "live": true, "measuredOn": [ { "bridge": "0.10.6", "by": "adom", "date": "2026-10-14", "edition": "connected", "major": 34, "solidworks": 2026 }, { "bridge": "0.10.9", "by": "community", "date": "2026-10-15", "edition": "desktop", "major": 29, "solidworks": 2021 } ], "variants": [ "clear_part" ] }, "route": "DeleteSelection2(swDelete_Children | swDelete_Absorbed), repeated until the tree is empty" }, "step": 1 }, { "op": "sketch_rect", "result": { "createdPlane": null, "entities": [ { "rect": { "cornersMm": [ [ 0.0, 0.0 ], [ 100.0, 20.0 ] ] } } ], "heightMm": 20.0, "mapped": false, "plane": "Front Plane", "planeFrames": "plane transforms (they match the measured Front/Top axes)", "proven": { "live": true, "measuredOn": [ { "bridge": "0.10.3", "by": "adom", "date": "2026-10-14", "edition": "connected", "major": 34, "solidworks": 2026 }, { "bridge": "0.10.9", "by": "community", "date": "2026-10-15", "edition": "desktop", "major": 29, "solidworks": 2021 } ], "variants": [ "sketch.plane.front", "sketch.rect" ] }, "resolvedPlane": null, "sketch": "Sketch6", "sketchNormal": [ 0.0, 0.0, 1.0 ], "sketchedOn": "Front Plane", "transformInverted": false, "widthMm": 100.0 }, "step": 2 }, { "op": "extrude", "result": { "depth2Mm": null, "depthMm": 60.0, "dir": { "flippedToFollowTheReference": false, "reference": null, "sketchNormal": [ 0.0, 0.0, 1.0 ], "value": false }, "direction": "one", "draftDeg": null, "draftInward": null, "endCondition": 0, "feature": "Boss-Extrude5", "proven": { "live": true, "measuredOn": [ { "bridge": "0.10.3", "by": "adom", "date": "2026-10-14", "edition": "connected", "major": 34, "solidworks": 2026 }, { "bridge": "0.10.9", "by": "community", "date": "2026-10-15", "edition": "desktop", "major": 29, "solidworks": 2021 } ], "variants": [ "extrude.one" ] }, "reverse": false, "sketch": "Sketch6", "throughAll": false, "upToFace": null }, "step": 3 }, { "op": "hole", "result": { "depthMm": null, "diameterMm": 20.0, "face": { "atPointMm": [ 25.0, 20.0, 30.0 ], "heightMm": 20.0, "normal": [ -0.0, 1.0, -0.0 ], "pickedBy": "geometry", "plane": "Top Plane" }, "feature": "Cut-Extrude2", "features": [ "Cut-Extrude2" ], "proven": { "live": false, "measuredOn": [], "unmeasured": [ { "variant": "hole.simple", "what": "a plain hole: a circle on the face's plane, cut blind or through all" } ], "variants": [ "hole.simple" ], "why": "not measured live: see `unmeasured` \u2014 verify this step's geometry with swx_inspect_bodies" }, "steps": [ { "op": "sketch", "result": { "createdPlane": "Plane2", "entities": [ { "circle": { "centerMm": [ 25.0, -30.0 ], "radiusMm": 10.0 } } ], "mapped": true, "plane": { "offsetFrom": "Top Plane", "offsetMm": 20.0 }, "planeFrames": "plane transforms (they match the measured Front/Top axes)", "radiusMm": 10.0, "resolvedPlane": { "offsetFrom": "Top Plane", "offsetMm": 20.0, "plane": "Plane2", "verified": true }, "sketch": "Sketch7", "sketchNormal": [ 0.0, 1.0, 0.0 ], "sketchedOn": "Plane2", "transformInverted": false } }, { "op": "cut", "result": { "depth2Mm": null, "depthMm": 0.0, "dir": { "flippedToFollowTheReference": false, "reference": [ 0.0, 1.0, 0.0 ], "sketchNormal": [ 0.0, 1.0, 0.0 ], "value": false }, "direction": "one", "draftDeg": null, "draftInward": null, "endCondition": 1, "feature": "Cut-Extrude2", "reverse": false, "sketch": "Sketch7", "throughAll": true, "upToFace": null } } ], "throughAll": true }, "step": 4 }, { "op": "set_material", "result": { "appearanceReapplied": [], "current": { "database": "SOLIDWORKS Materials", "name": "6061 Alloy" }, "database": "SOLIDWORKS Materials.sldmat", "densityKgM3": 2700.0, "densityRequested": 2700.0, "material": "6061 Alloy", "proven": { "live": false, "measuredOn": [], "unmeasured": [ { "variant": "set_material.density", "what": "a density in kg/m\u00b3 (the document's own, or checked against the material's)" } ], "variants": [ "set_material", "set_material.density" ], "why": "not measured live: see `unmeasured` \u2014 verify this step's geometry with swx_inspect_bodies" } }, "step": 5 } ], "success": true, "targetDocument": "Part1-1792105365003.SLDPRT", "timeoutSeconds": 420 }, "massProperties": { "_hint": "SI units: kg, m^3, m^2, m. Mass is only as good as the material assignment \u2014 a 0 or default density means no material is set on the model, so report the density alongside the mass.", "_timeoutHint": "ab waits up to 120s for this verb before the request times out. If it's a long operation (cloud open / download / export), DON'T treat a timeout as failure \u2014 the work usually keeps running on the bridge. Poll `swx_status` until it reports done.", "boundingBox": [ 0.0, 0.0, 0.0, 0.1, 0.02, 0.06 ], "centerOfMass": [ 0.05138132283342444, 0.009999999999999998, 0.029999999999999995 ], "centerOfMassMm": [ 51.381323, 10.0, 30.0 ], "density": 2700.0, "densityKgM3": 2700.0, "doc": { "config": "Default", "dirty": true, "path": "C:/Users/drew/AppData/Local/adom-solidworks-bridge/exports/scratch/Part1-1792105365003.SLDPRT", "title": "Part1-1792105365003.SLDPRT", "type": "part" }, "durationMs": 1759, "error": "", "massG": 307.0353996706151, "massKg": 0.3070353996706151, "materialName": "6061 Alloy", "output": "{\"_hint\":\"SI units: kg, m^3, m^2, m. Mass is only as good as the material assignment \u2014 a 0 or default density means no material is set on the model, so report the density alongside the mass.\",\"_timeoutHint\":\"ab waits up to 120s for this verb before the request times out. If it's a long operation (cloud open / download / export), DON'T treat a timeout as failure \u2014 the work usually keeps running on the bridge. Poll `swx_status` until it reports done.\",\"boundingBox\":[0.0,0.0,0.0,0.1,0.02,0.06],\"centerOfMass\":[0.05138132283342444,0.009999999999999998,0.029999999999999995],\"centerOfMassMm\":[51.381323,10.0,30.0],\"density\":2700.0,\"densityKgM3\":2700.0,\"doc\":{\"config\":\"Default\",\"dirty\":true,\"path\":\"C:\\\\Users\\\\drew\\\\AppData\\\\Local\\\\adom-solidworks-bridge\\\\exports\\\\scratch\\\\Part1-1792105365003.SLDPRT\",\"title\":\"Part1-1792105365003.SLDPRT\",\"type\":\"part\"},\"massG\":307.0353996706151,\"massKg\":0.3070353996706151,\"materialName\":\"6061 Alloy\",\"readiness\":{\"basedOn\":[\"alreadyReadyThisSession\"],\"evaluatedAt\":\"gate\",\"readsAllowed\":true,\"ready\":true,\"running\":true,\"state\":\"ready\",\"why\":null},\"statusVerb\":\"swx_status\",\"success\":true,\"surfaceAreaM2\":0.01902831853071796,\"surfaceAreaMm2\":19028.31853071796,\"timeoutSeconds\":120,\"volumeM3\":0.0001137168146928204,\"volumeMm3\":113716.8146928204}", "readiness": { "basedOn": [ "alreadyReadyThisSession" ], "evaluatedAt": "gate", "readsAllowed": true, "ready": true, "running": true, "state": "ready", "why": null }, "schemaVersion": 1, "status": "ok", "statusVerb": "swx_status", "success": true, "surfaceAreaM2": 0.01902831853071796, "surfaceAreaMm2": 19028.31853071796, "timeoutSeconds": 120, "volumeM3": 0.0001137168146928204, "volumeMm3": 113716.8146928204 }, "pass": true, "checks": [ { "quantity": "massG", "expected": 307.04, "measured": 307.0353996706151, "offPct": 0.0014982834109282007, "pass": true }, { "quantity": "centerOfMassMm", "expected": [ 51.38, 10.0, 30.0 ], "measured": [ 51.381323, 10.0, 30.0 ], "pass": true } ], "fails": [], "seconds": 12.0 }, { "id": "cswa-03-3dengr-q8-hole30", "title": "3dengr Q8: the hole changed to \u00d830", "official": false, "source": "https://www.3dengr.com/cswa-practice-questions.html", "expected": { "massG": 285.83, "tolerancePct": 1.0 }, "material": { "name": "6061 Alloy", "densityKgM3": 2700 }, "runScript": { "_hint": "Each step reports what it built. Verify with swx_inspect_bodies (the geometry) or swx_mass_properties (the mass) rather than trusting the step list. This document was created by the bridge, so swx_close_doc {save:false} discards the whole thing safely; swx_save_as puts it on disk. A step that fails stops the script and says which one, leaving what was already built in place.", "_timeoutHint": "ab waits up to 420s for this verb before the request times out. If it's a long operation (cloud open / download / export), DON'T treat a timeout as failure \u2014 the work usually keeps running on the bridge. Poll `swx_status` until it reports done.", "bridgeCreatedDocument": true, "created": null, "doc": { "config": "Default", "dirty": true, "path": "C:/Users/drew/AppData/Local/adom-solidworks-bridge/exports/scratch/Part1-1792105365003.SLDPRT", "title": "Part1-1792105365003.SLDPRT", "type": "part" }, "documentName": "Part1-1792105365003.SLDPRT", "durationMs": 10687, "error": "", "ops": [ "new_part", "new_assembly", "clear_part", "sketch", "sketch_rect", "sketch_circle", "extrude", "cut", "set_material", "set_appearance", "fillet", "chamfer", "shell", "revolve", "revolve_cut", "mirror", "hole", "linear_pattern", "circular_pattern", "set_prop", "save_as", "rebuild", "zoom_fit" ], "output": "{\"_hint\":\"Each step reports what it built. Verify with swx_inspect_bodies (the geometry) or swx_mass_properties (the mass) rather than trusting the step list. This document was created by the bridge, so swx_close_doc {save:false} discards the whole thing safely; swx_save_as puts it on disk. A step that fails stops the script and says which one, leaving what was already built in place.\",\"_timeoutHint\":\"ab waits up to 420s for this verb before the request times out. If it's a long operation (cloud open / download / export), DON'T treat a timeout as failure \u2014 the work usually keeps running on the bridge. Poll `swx_status` until it reports done.\",\"bridgeCreatedDocument\":true,\"created\":null,\"doc\":{\"config\":\"Default\",\"dirty\":true,\"path\":\"C:\\\\Users\\\\drew\\\\AppData\\\\Local\\\\adom-solidworks-bridge\\\\exports\\\\scratch\\\\Part1-1792105365003.SLDPRT\",\"title\":\"Part1-1792105365003.SLDPRT\",\"type\":\"part\"},\"documentName\":\"Part1-1792105365003.SLDPRT\",\"ops\":[\"new_part\",\"new_assembly\",\"clear_part\",\"sketch\",\"sketch_rect\",\"sketch_circle\",\"extrude\",\"cut\",\"set_material\",\"set_appearance\",\"fillet\",\"chamfer\",\"shell\",\"revolve\",\"revolve_cut\",\"mirror\",\"hole\",\"linear_pattern\",\"circular_pattern\",\"set_prop\",\"save_as\",\"rebuild\",\"zoom_fit\"],\"progress\":{\"confidence\":\"estimate\",\"elapsedSec\":8.5,\"estimatedSec\":30,\"etaSec\":0,\"percent\":100,\"phase\":\"run_script\",\"startKind\":\"warm\",\"stepLabel\":\"Running 5 modeling step(s)\"},\"readiness\":{\"basedOn\":[\"alreadyReadyThisSession\"],\"evaluatedAt\":\"gate\",\"readsAllowed\":true,\"ready\":true,\"running\":true,\"state\":\"ready\",\"why\":null},\"solidworksRevision\":\"34.3.0\",\"statusVerb\":\"swx_status\",\"stepCount\":5,\"steps\":[{\"op\":\"clear_part\",\"result\":{\"bodiesLeft\":0,\"cleared\":\"Part1-1792105365003.SLDPRT\",\"deleted\":[\"Sketch6\",\"Boss-Extrude5\",\"Plane2\",\"Sketch7\",\"Cut-Extrude2\"],\"featuresDeleted\":5,\"passes\":1,\"proven\":{\"live\":true,\"measuredOn\":[{\"bridge\":\"0.10.6\",\"by\":\"adom\",\"date\":\"2026-10-14\",\"edition\":\"connected\",\"major\":34,\"solidworks\":2026},{\"bridge\":\"0.10.9\",\"by\":\"community\",\"date\":\"2026-10-15\",\"edition\":\"desktop\",\"major\":29,\"solidworks\":2021}],\"variants\":[\"clear_part\"]},\"route\":\"DeleteSelection2(swDelete_Children | swDelete_Absorbed), repeated until the tree is empty\"},\"step\":1},{\"op\":\"sketch_rect\",\"result\":{\"createdPlane\":null,\"entities\":[{\"rect\":{\"cornersMm\":[[0.0,0.0],[100.0,20.0]]}}],\"heightMm\":20.0,\"mapped\":false,\"plane\":\"Front Plane\",\"planeFrames\":\"plane transforms (they match the measured Front/Top axes)\",\"proven\":{\"live\":true,\"measuredOn\":[{\"bridge\":\"0.10.3\",\"by\":\"adom\",\"date\":\"2026-10-14\",\"edition\":\"connected\",\"major\":34,\"solidworks\":2026},{\"bridge\":\"0.10.9\",\"by\":\"community\",\"date\":\"2026-10-15\",\"edition\":\"desktop\",\"major\":29,\"solidworks\":2021}],\"variants\":[\"sketch.plane.front\",\"sketch.rect\"]},\"resolvedPlane\":null,\"sketch\":\"Sketch8\",\"sketchNormal\":[0.0,0.0,1.0],\"sketchedOn\":\"Front Plane\",\"transformInverted\":false,\"widthMm\":100.0},\"step\":2},{\"op\":\"extrude\",\"result\":{\"depth2Mm\":null,\"depthMm\":60.0,\"dir\":{\"flippedToFollowTheReference\":false,\"reference\":null,\"sketchNormal\":[0.0,0.0,1.0],\"value\":false},\"direction\":\"one\",\"draftDeg\":null,\"draftInward\":null,\"endCondition\":0,\"feature\":\"Boss-Extrude6\",\"proven\":{\"live\":true,\"measuredOn\":[{\"bridge\":\"0.10.3\",\"by\":\"adom\",\"date\":\"2026-10-14\",\"edition\":\"connected\",\"major\":34,\"solidworks\":2026},{\"bridge\":\"0.10.9\",\"by\":\"community\",\"date\":\"2026-10-15\",\"edition\":\"desktop\",\"major\":29,\"solidworks\":2021}],\"variants\":[\"extrude.one\"]},\"reverse\":false,\"sketch\":\"Sketch8\",\"throughAll\":false,\"upToFace\":null},\"step\":3},{\"op\":\"hole\",\"result\":{\"depthMm\":null,\"diameterMm\":30.0,\"face\":{\"atPointMm\":[25.0,20.0,30.0],\"heightMm\":20.0,\"normal\":[-0.0,1.0,-0.0],\"pickedBy\":\"geometry\",\"plane\":\"Top Plane\"},\"feature\":\"Cut-Extrude3\",\"features\":[\"Cut-Extrude3\"],\"proven\":{\"live\":false,\"measuredOn\":[],\"unmeasured\":[{\"variant\":\"hole.simple\",\"what\":\"a plain hole: a circle on the face's plane, cut blind or through all\"}],\"variants\":[\"hole.simple\"],\"why\":\"not measured live: see `unmeasured` \u2014 verify this step's geometry with swx_inspect_bodies\"},\"steps\":[{\"op\":\"sketch\",\"result\":{\"createdPlane\":\"Plane3\",\"entities\":[{\"circle\":{\"centerMm\":[25.0,-30.0],\"radiusMm\":15.0}}],\"mapped\":true,\"plane\":{\"offsetFrom\":\"Top Plane\",\"offsetMm\":20.0},\"planeFrames\":\"plane transforms (they match the measured Front/Top axes)\",\"radiusMm\":15.0,\"resolvedPlane\":{\"offsetFrom\":\"Top Plane\",\"offsetMm\":20.0,\"plane\":\"Plane3\",\"verified\":true},\"sketch\":\"Sketch9\",\"sketchNormal\":[0.0,1.0,0.0],\"sketchedOn\":\"Plane3\",\"transformInverted\":false}},{\"op\":\"cut\",\"result\":{\"depth2Mm\":null,\"depthMm\":0.0,\"dir\":{\"flippedToFollowTheReference\":false,\"reference\":[0.0,1.0,0.0],\"sketchNormal\":[0.0,1.0,0.0],\"value\":false},\"direction\":\"one\",\"draftDeg\":null,\"draftInward\":null,\"endCondition\":1,\"feature\":\"Cut-Extrude3\",\"reverse\":false,\"sketch\":\"Sketch9\",\"throughAll\":true,\"upToFace\":null}}],\"throughAll\":true},\"step\":4},{\"op\":\"set_material\",\"result\":{\"appearanceReapplied\":[],\"current\":{\"database\":\"SOLIDWORKS Materials\",\"name\":\"6061 Alloy\"},\"database\":\"SOLIDWORKS Materials.sldmat\",\"densityKgM3\":2700.0,\"densityRequested\":2700.0,\"material\":\"6061 Alloy\",\"proven\":{\"live\":false,\"measuredOn\":[],\"unmeasured\":[{\"variant\":\"set_material.density\",\"what\":\"a density in kg/m\u00b3 (the document's own, or checked against the material's)\"}],\"variants\":[\"set_material\",\"set_material.density\"],\"why\":\"not measured live: see `unmeasured` \u2014 verify this step's geometry with swx_inspect_bodies\"}},\"step\":5}],\"success\":true,\"targetDocument\":\"Part1-1792105365003.SLDPRT\",\"timeoutSeconds\":420}", "progress": { "confidence": "estimate", "elapsedSec": 8.5, "estimatedSec": 30, "etaSec": 0, "percent": 100, "phase": "run_script", "startKind": "warm", "stepLabel": "Running 5 modeling step(s)" }, "readiness": { "basedOn": [ "alreadyReadyThisSession" ], "evaluatedAt": "gate", "readsAllowed": true, "ready": true, "running": true, "state": "ready", "why": null }, "schemaVersion": 1, "solidworksRevision": "34.3.0", "status": "ok", "statusVerb": "swx_status", "stepCount": 5, "steps": [ { "op": "clear_part", "result": { "bodiesLeft": 0, "cleared": "Part1-1792105365003.SLDPRT", "deleted": [ "Sketch6", "Boss-Extrude5", "Plane2", "Sketch7", "Cut-Extrude2" ], "featuresDeleted": 5, "passes": 1, "proven": { "live": true, "measuredOn": [ { "bridge": "0.10.6", "by": "adom", "date": "2026-10-14", "edition": "connected", "major": 34, "solidworks": 2026 }, { "bridge": "0.10.9", "by": "community", "date": "2026-10-15", "edition": "desktop", "major": 29, "solidworks": 2021 } ], "variants": [ "clear_part" ] }, "route": "DeleteSelection2(swDelete_Children | swDelete_Absorbed), repeated until the tree is empty" }, "step": 1 }, { "op": "sketch_rect", "result": { "createdPlane": null, "entities": [ { "rect": { "cornersMm": [ [ 0.0, 0.0 ], [ 100.0, 20.0 ] ] } } ], "heightMm": 20.0, "mapped": false, "plane": "Front Plane", "planeFrames": "plane transforms (they match the measured Front/Top axes)", "proven": { "live": true, "measuredOn": [ { "bridge": "0.10.3", "by": "adom", "date": "2026-10-14", "edition": "connected", "major": 34, "solidworks": 2026 }, { "bridge": "0.10.9", "by": "community", "date": "2026-10-15", "edition": "desktop", "major": 29, "solidworks": 2021 } ], "variants": [ "sketch.plane.front", "sketch.rect" ] }, "resolvedPlane": null, "sketch": "Sketch8", "sketchNormal": [ 0.0, 0.0, 1.0 ], "sketchedOn": "Front Plane", "transformInverted": false, "widthMm": 100.0 }, "step": 2 }, { "op": "extrude", "result": { "depth2Mm": null, "depthMm": 60.0, "dir": { "flippedToFollowTheReference": false, "reference": null, "sketchNormal": [ 0.0, 0.0, 1.0 ], "value": false }, "direction": "one", "draftDeg": null, "draftInward": null, "endCondition": 0, "feature": "Boss-Extrude6", "proven": { "live": true, "measuredOn": [ { "bridge": "0.10.3", "by": "adom", "date": "2026-10-14", "edition": "connected", "major": 34, "solidworks": 2026 }, { "bridge": "0.10.9", "by": "community", "date": "2026-10-15", "edition": "desktop", "major": 29, "solidworks": 2021 } ], "variants": [ "extrude.one" ] }, "reverse": false, "sketch": "Sketch8", "throughAll": false, "upToFace": null }, "step": 3 }, { "op": "hole", "result": { "depthMm": null, "diameterMm": 30.0, "face": { "atPointMm": [ 25.0, 20.0, 30.0 ], "heightMm": 20.0, "normal": [ -0.0, 1.0, -0.0 ], "pickedBy": "geometry", "plane": "Top Plane" }, "feature": "Cut-Extrude3", "features": [ "Cut-Extrude3" ], "proven": { "live": false, "measuredOn": [], "unmeasured": [ { "variant": "hole.simple", "what": "a plain hole: a circle on the face's plane, cut blind or through all" } ], "variants": [ "hole.simple" ], "why": "not measured live: see `unmeasured` \u2014 verify this step's geometry with swx_inspect_bodies" }, "steps": [ { "op": "sketch", "result": { "createdPlane": "Plane3", "entities": [ { "circle": { "centerMm": [ 25.0, -30.0 ], "radiusMm": 15.0 } } ], "mapped": true, "plane": { "offsetFrom": "Top Plane", "offsetMm": 20.0 }, "planeFrames": "plane transforms (they match the measured Front/Top axes)", "radiusMm": 15.0, "resolvedPlane": { "offsetFrom": "Top Plane", "offsetMm": 20.0, "plane": "Plane3", "verified": true }, "sketch": "Sketch9", "sketchNormal": [ 0.0, 1.0, 0.0 ], "sketchedOn": "Plane3", "transformInverted": false } }, { "op": "cut", "result": { "depth2Mm": null, "depthMm": 0.0, "dir": { "flippedToFollowTheReference": false, "reference": [ 0.0, 1.0, 0.0 ], "sketchNormal": [ 0.0, 1.0, 0.0 ], "value": false }, "direction": "one", "draftDeg": null, "draftInward": null, "endCondition": 1, "feature": "Cut-Extrude3", "reverse": false, "sketch": "Sketch9", "throughAll": true, "upToFace": null } } ], "throughAll": true }, "step": 4 }, { "op": "set_material", "result": { "appearanceReapplied": [], "current": { "database": "SOLIDWORKS Materials", "name": "6061 Alloy" }, "database": "SOLIDWORKS Materials.sldmat", "densityKgM3": 2700.0, "densityRequested": 2700.0, "material": "6061 Alloy", "proven": { "live": false, "measuredOn": [], "unmeasured": [ { "variant": "set_material.density", "what": "a density in kg/m\u00b3 (the document's own, or checked against the material's)" } ], "variants": [ "set_material", "set_material.density" ], "why": "not measured live: see `unmeasured` \u2014 verify this step's geometry with swx_inspect_bodies" } }, "step": 5 } ], "success": true, "targetDocument": "Part1-1792105365003.SLDPRT", "timeoutSeconds": 420 }, "massProperties": { "_hint": "SI units: kg, m^3, m^2, m. Mass is only as good as the material assignment \u2014 a 0 or default density means no material is set on the model, so report the density alongside the mass.", "_timeoutHint": "ab waits up to 120s for this verb before the request times out. If it's a long operation (cloud open / download / export), DON'T treat a timeout as failure \u2014 the work usually keeps running on the bridge. Poll `swx_status` until it reports done.", "boundingBox": [ 0.0, 0.0, 0.0, 0.1, 0.02, 0.06 ], "centerOfMass": [ 0.05333855767238339, 0.009999999999999998, 0.03 ], "centerOfMassMm": [ 53.338558, 10.0, 30.0 ], "density": 2700.0, "densityKgM3": 2700.0, "doc": { "config": "Default", "dirty": true, "path": "C:/Users/drew/AppData/Local/adom-solidworks-bridge/exports/scratch/Part1-1792105365003.SLDPRT", "title": "Part1-1792105365003.SLDPRT", "type": "part" }, "durationMs": 1085, "error": "", "massG": 285.829649258884, "massKg": 0.285829649258884, "materialName": "6061 Alloy", "output": "{\"_hint\":\"SI units: kg, m^3, m^2, m. Mass is only as good as the material assignment \u2014 a 0 or default density means no material is set on the model, so report the density alongside the mass.\",\"_timeoutHint\":\"ab waits up to 120s for this verb before the request times out. If it's a long operation (cloud open / download / export), DON'T treat a timeout as failure \u2014 the work usually keeps running on the bridge. Poll `swx_status` until it reports done.\",\"boundingBox\":[0.0,0.0,0.0,0.1,0.02,0.06],\"centerOfMass\":[0.05333855767238339,0.009999999999999998,0.03],\"centerOfMassMm\":[53.338558,10.0,30.0],\"density\":2700.0,\"densityKgM3\":2700.0,\"doc\":{\"config\":\"Default\",\"dirty\":true,\"path\":\"C:\\\\Users\\\\drew\\\\AppData\\\\Local\\\\adom-solidworks-bridge\\\\exports\\\\scratch\\\\Part1-1792105365003.SLDPRT\",\"title\":\"Part1-1792105365003.SLDPRT\",\"type\":\"part\"},\"massG\":285.829649258884,\"massKg\":0.285829649258884,\"materialName\":\"6061 Alloy\",\"readiness\":{\"basedOn\":[\"alreadyReadyThisSession\"],\"evaluatedAt\":\"gate\",\"readsAllowed\":true,\"ready\":true,\"running\":true,\"state\":\"ready\",\"why\":null},\"statusVerb\":\"swx_status\",\"success\":true,\"surfaceAreaM2\":0.01887123889803847,\"surfaceAreaMm2\":18871.238898038468,\"timeoutSeconds\":120,\"volumeM3\":0.00010586283305884592,\"volumeMm3\":105862.83305884592}", "readiness": { "basedOn": [ "alreadyReadyThisSession" ], "evaluatedAt": "gate", "readsAllowed": true, "ready": true, "running": true, "state": "ready", "why": null }, "schemaVersion": 1, "status": "ok", "statusVerb": "swx_status", "success": true, "surfaceAreaM2": 0.01887123889803847, "surfaceAreaMm2": 18871.238898038468, "timeoutSeconds": 120, "volumeM3": 0.00010586283305884592, "volumeMm3": 105862.83305884592 }, "pass": true, "checks": [ { "quantity": "massG", "expected": 285.83, "measured": 285.829649258884, "offPct": 0.00012270969317231364, "pass": true } ], "fails": [], "seconds": 11.8 }, { "id": "cswa-04-3dengr-q9-l-bracket", "title": "3dengr Q9: an L-bracket in AISI 1020, ONE polyline sketch", "official": false, "source": "https://www.3dengr.com/cswa-practice-questions.html", "expected": { "massG": 410.8, "centerOfMassMm": [ 26.54, 16.54, 20.0 ], "tolerancePct": 1.0 }, "material": { "name": "AISI 1020", "densityKgM3": 7900 }, "runScript": { "_hint": "Each step reports what it built. Verify with swx_inspect_bodies (the geometry) or swx_mass_properties (the mass) rather than trusting the step list. This document was created by the bridge, so swx_close_doc {save:false} discards the whole thing safely; swx_save_as puts it on disk. A step that fails stops the script and says which one, leaving what was already built in place.", "_timeoutHint": "ab waits up to 420s for this verb before the request times out. If it's a long operation (cloud open / download / export), DON'T treat a timeout as failure \u2014 the work usually keeps running on the bridge. Poll `swx_status` until it reports done.", "bridgeCreatedDocument": true, "created": null, "doc": { "config": "Default", "dirty": true, "path": "C:/Users/drew/AppData/Local/adom-solidworks-bridge/exports/scratch/Part1-1792105365003.SLDPRT", "title": "Part1-1792105365003.SLDPRT", "type": "part" }, "documentName": "Part1-1792105365003.SLDPRT", "durationMs": 6099, "error": "", "ops": [ "new_part", "new_assembly", "clear_part", "sketch", "sketch_rect", "sketch_circle", "extrude", "cut", "set_material", "set_appearance", "fillet", "chamfer", "shell", "revolve", "revolve_cut", "mirror", "hole", "linear_pattern", "circular_pattern", "set_prop", "save_as", "rebuild", "zoom_fit" ], "output": "{\"_hint\":\"Each step reports what it built. Verify with swx_inspect_bodies (the geometry) or swx_mass_properties (the mass) rather than trusting the step list. This document was created by the bridge, so swx_close_doc {save:false} discards the whole thing safely; swx_save_as puts it on disk. A step that fails stops the script and says which one, leaving what was already built in place.\",\"_timeoutHint\":\"ab waits up to 420s for this verb before the request times out. If it's a long operation (cloud open / download / export), DON'T treat a timeout as failure \u2014 the work usually keeps running on the bridge. Poll `swx_status` until it reports done.\",\"bridgeCreatedDocument\":true,\"created\":null,\"doc\":{\"config\":\"Default\",\"dirty\":true,\"path\":\"C:\\\\Users\\\\drew\\\\AppData\\\\Local\\\\adom-solidworks-bridge\\\\exports\\\\scratch\\\\Part1-1792105365003.SLDPRT\",\"title\":\"Part1-1792105365003.SLDPRT\",\"type\":\"part\"},\"documentName\":\"Part1-1792105365003.SLDPRT\",\"ops\":[\"new_part\",\"new_assembly\",\"clear_part\",\"sketch\",\"sketch_rect\",\"sketch_circle\",\"extrude\",\"cut\",\"set_material\",\"set_appearance\",\"fillet\",\"chamfer\",\"shell\",\"revolve\",\"revolve_cut\",\"mirror\",\"hole\",\"linear_pattern\",\"circular_pattern\",\"set_prop\",\"save_as\",\"rebuild\",\"zoom_fit\"],\"progress\":{\"confidence\":\"estimate\",\"elapsedSec\":4.7,\"estimatedSec\":30,\"etaSec\":0,\"percent\":100,\"phase\":\"run_script\",\"startKind\":\"warm\",\"stepLabel\":\"Running 4 modeling step(s)\"},\"readiness\":{\"basedOn\":[\"alreadyReadyThisSession\"],\"evaluatedAt\":\"gate\",\"readsAllowed\":true,\"ready\":true,\"running\":true,\"state\":\"ready\",\"why\":null},\"solidworksRevision\":\"34.3.0\",\"statusVerb\":\"swx_status\",\"stepCount\":4,\"steps\":[{\"op\":\"clear_part\",\"result\":{\"bodiesLeft\":0,\"cleared\":\"Part1-1792105365003.SLDPRT\",\"deleted\":[\"Sketch8\",\"Boss-Extrude6\",\"Plane3\",\"Sketch9\",\"Cut-Extrude3\"],\"featuresDeleted\":5,\"passes\":1,\"proven\":{\"live\":true,\"measuredOn\":[{\"bridge\":\"0.10.6\",\"by\":\"adom\",\"date\":\"2026-10-14\",\"edition\":\"connected\",\"major\":34,\"solidworks\":2026},{\"bridge\":\"0.10.9\",\"by\":\"community\",\"date\":\"2026-10-15\",\"edition\":\"desktop\",\"major\":29,\"solidworks\":2021}],\"variants\":[\"clear_part\"]},\"route\":\"DeleteSelection2(swDelete_Children | swDelete_Absorbed), repeated until the tree is empty\"},\"step\":1},{\"op\":\"sketch\",\"result\":{\"createdPlane\":null,\"entities\":[{\"line\":{\"fromMm\":[0.0,0.0],\"toMm\":[80.0,0.0]}},{\"line\":{\"fromMm\":[80.0,0.0],\"toMm\":[80.0,10.0]}},{\"line\":{\"fromMm\":[80.0,10.0],\"toMm\":[10.0,10.0]}},{\"line\":{\"fromMm\":[10.0,10.0],\"toMm\":[10.0,60.0]}},{\"line\":{\"fromMm\":[10.0,60.0],\"toMm\":[0.0,60.0]}},{\"line\":{\"fromMm\":[0.0,60.0],\"toMm\":[0.0,0.0]}}],\"mapped\":false,\"plane\":\"Front Plane\",\"planeFrames\":\"plane transforms (they match the measured Front/Top axes)\",\"proven\":{\"live\":false,\"measuredOn\":[],\"unmeasured\":[{\"variant\":\"sketch.line\",\"what\":\"lines of a closed contour (line, polyline, polygon, slot, rounded rect): ISketchManager::CreateLine\"}],\"variants\":[\"sketch.plane.front\",\"sketch.multiProfile\",\"sketch.line\"],\"why\":\"not measured live: see `unmeasured` \u2014 verify this step's geometry with swx_inspect_bodies\"},\"resolvedPlane\":null,\"sketch\":\"Sketch10\",\"sketchNormal\":[0.0,0.0,1.0],\"sketchedOn\":\"Front Plane\",\"transformInverted\":false},\"step\":2},{\"op\":\"extrude\",\"result\":{\"depth2Mm\":null,\"depthMm\":40.0,\"dir\":{\"flippedToFollowTheReference\":false,\"reference\":null,\"sketchNormal\":[0.0,0.0,1.0],\"value\":false},\"direction\":\"one\",\"draftDeg\":null,\"draftInward\":null,\"endCondition\":0,\"feature\":\"Boss-Extrude7\",\"proven\":{\"live\":true,\"measuredOn\":[{\"bridge\":\"0.10.3\",\"by\":\"adom\",\"date\":\"2026-10-14\",\"edition\":\"connected\",\"major\":34,\"solidworks\":2026},{\"bridge\":\"0.10.9\",\"by\":\"community\",\"date\":\"2026-10-15\",\"edition\":\"desktop\",\"major\":29,\"solidworks\":2021}],\"variants\":[\"extrude.one\"]},\"reverse\":false,\"sketch\":\"Sketch10\",\"throughAll\":false,\"upToFace\":null},\"step\":3},{\"op\":\"set_material\",\"result\":{\"appearanceReapplied\":[],\"current\":{\"database\":\"SOLIDWORKS Materials\",\"name\":\"AISI 1020\"},\"database\":\"SOLIDWORKS Materials.sldmat\",\"densityKgM3\":7900.000000000001,\"densityRequested\":7900.0,\"material\":\"AISI 1020\",\"proven\":{\"live\":false,\"measuredOn\":[],\"unmeasured\":[{\"variant\":\"set_material.density\",\"what\":\"a density in kg/m\u00b3 (the document's own, or checked against the material's)\"}],\"variants\":[\"set_material\",\"set_material.density\"],\"why\":\"not measured live: see `unmeasured` \u2014 verify this step's geometry with swx_inspect_bodies\"}},\"step\":4}],\"success\":true,\"targetDocument\":\"Part1-1792105365003.SLDPRT\",\"timeoutSeconds\":420}", "progress": { "confidence": "estimate", "elapsedSec": 4.7, "estimatedSec": 30, "etaSec": 0, "percent": 100, "phase": "run_script", "startKind": "warm", "stepLabel": "Running 4 modeling step(s)" }, "readiness": { "basedOn": [ "alreadyReadyThisSession" ], "evaluatedAt": "gate", "readsAllowed": true, "ready": true, "running": true, "state": "ready", "why": null }, "schemaVersion": 1, "solidworksRevision": "34.3.0", "status": "ok", "statusVerb": "swx_status", "stepCount": 4, "steps": [ { "op": "clear_part", "result": { "bodiesLeft": 0, "cleared": "Part1-1792105365003.SLDPRT", "deleted": [ "Sketch8", "Boss-Extrude6", "Plane3", "Sketch9", "Cut-Extrude3" ], "featuresDeleted": 5, "passes": 1, "proven": { "live": true, "measuredOn": [ { "bridge": "0.10.6", "by": "adom", "date": "2026-10-14", "edition": "connected", "major": 34, "solidworks": 2026 }, { "bridge": "0.10.9", "by": "community", "date": "2026-10-15", "edition": "desktop", "major": 29, "solidworks": 2021 } ], "variants": [ "clear_part" ] }, "route": "DeleteSelection2(swDelete_Children | swDelete_Absorbed), repeated until the tree is empty" }, "step": 1 }, { "op": "sketch", "result": { "createdPlane": null, "entities": [ { "line": { "fromMm": [ 0.0, 0.0 ], "toMm": [ 80.0, 0.0 ] } }, { "line": { "fromMm": [ 80.0, 0.0 ], "toMm": [ 80.0, 10.0 ] } }, { "line": { "fromMm": [ 80.0, 10.0 ], "toMm": [ 10.0, 10.0 ] } }, { "line": { "fromMm": [ 10.0, 10.0 ], "toMm": [ 10.0, 60.0 ] } }, { "line": { "fromMm": [ 10.0, 60.0 ], "toMm": [ 0.0, 60.0 ] } }, { "line": { "fromMm": [ 0.0, 60.0 ], "toMm": [ 0.0, 0.0 ] } } ], "mapped": false, "plane": "Front Plane", "planeFrames": "plane transforms (they match the measured Front/Top axes)", "proven": { "live": false, "measuredOn": [], "unmeasured": [ { "variant": "sketch.line", "what": "lines of a closed contour (line, polyline, polygon, slot, rounded rect): ISketchManager::CreateLine" } ], "variants": [ "sketch.plane.front", "sketch.multiProfile", "sketch.line" ], "why": "not measured live: see `unmeasured` \u2014 verify this step's geometry with swx_inspect_bodies" }, "resolvedPlane": null, "sketch": "Sketch10", "sketchNormal": [ 0.0, 0.0, 1.0 ], "sketchedOn": "Front Plane", "transformInverted": false }, "step": 2 }, { "op": "extrude", "result": { "depth2Mm": null, "depthMm": 40.0, "dir": { "flippedToFollowTheReference": false, "reference": null, "sketchNormal": [ 0.0, 0.0, 1.0 ], "value": false }, "direction": "one", "draftDeg": null, "draftInward": null, "endCondition": 0, "feature": "Boss-Extrude7", "proven": { "live": true, "measuredOn": [ { "bridge": "0.10.3", "by": "adom", "date": "2026-10-14", "edition": "connected", "major": 34, "solidworks": 2026 }, { "bridge": "0.10.9", "by": "community", "date": "2026-10-15", "edition": "desktop", "major": 29, "solidworks": 2021 } ], "variants": [ "extrude.one" ] }, "reverse": false, "sketch": "Sketch10", "throughAll": false, "upToFace": null }, "step": 3 }, { "op": "set_material", "result": { "appearanceReapplied": [], "current": { "database": "SOLIDWORKS Materials", "name": "AISI 1020" }, "database": "SOLIDWORKS Materials.sldmat", "densityKgM3": 7900.000000000001, "densityRequested": 7900.0, "material": "AISI 1020", "proven": { "live": false, "measuredOn": [], "unmeasured": [ { "variant": "set_material.density", "what": "a density in kg/m\u00b3 (the document's own, or checked against the material's)" } ], "variants": [ "set_material", "set_material.density" ], "why": "not measured live: see `unmeasured` \u2014 verify this step's geometry with swx_inspect_bodies" } }, "step": 4 } ], "success": true, "targetDocument": "Part1-1792105365003.SLDPRT", "timeoutSeconds": 420 }, "massProperties": { "_hint": "SI units: kg, m^3, m^2, m. Mass is only as good as the material assignment \u2014 a 0 or default density means no material is set on the model, so report the density alongside the mass.", "_timeoutHint": "ab waits up to 120s for this verb before the request times out. If it's a long operation (cloud open / download / export), DON'T treat a timeout as failure \u2014 the work usually keeps running on the bridge. Poll `swx_status` until it reports done.", "boundingBox": [ 0.0, 0.0, 0.0, 0.08, 0.06, 0.04 ], "centerOfMass": [ 0.026538461538461535, 0.016538461538461537, 0.019999999999999997 ], "centerOfMassMm": [ 26.538462, 16.538462, 20.0 ], "density": 7900.000000000001, "densityKgM3": 7900.000000000001, "doc": { "config": "Default", "dirty": true, "path": "C:/Users/drew/AppData/Local/adom-solidworks-bridge/exports/scratch/Part1-1792105365003.SLDPRT", "title": "Part1-1792105365003.SLDPRT", "type": "part" }, "durationMs": 1230, "error": "", "massG": 410.80000000000007, "massKg": 0.41080000000000005, "materialName": "AISI 1020", "output": "{\"_hint\":\"SI units: kg, m^3, m^2, m. Mass is only as good as the material assignment \u2014 a 0 or default density means no material is set on the model, so report the density alongside the mass.\",\"_timeoutHint\":\"ab waits up to 120s for this verb before the request times out. If it's a long operation (cloud open / download / export), DON'T treat a timeout as failure \u2014 the work usually keeps running on the bridge. Poll `swx_status` until it reports done.\",\"boundingBox\":[0.0,0.0,0.0,0.08,0.06,0.04],\"centerOfMass\":[0.026538461538461535,0.016538461538461537,0.019999999999999997],\"centerOfMassMm\":[26.538462,16.538462,20.0],\"density\":7900.000000000001,\"densityKgM3\":7900.000000000001,\"doc\":{\"config\":\"Default\",\"dirty\":true,\"path\":\"C:\\\\Users\\\\drew\\\\AppData\\\\Local\\\\adom-solidworks-bridge\\\\exports\\\\scratch\\\\Part1-1792105365003.SLDPRT\",\"title\":\"Part1-1792105365003.SLDPRT\",\"type\":\"part\"},\"massG\":410.80000000000007,\"massKg\":0.41080000000000005,\"materialName\":\"AISI 1020\",\"readiness\":{\"basedOn\":[\"alreadyReadyThisSession\"],\"evaluatedAt\":\"gate\",\"readsAllowed\":true,\"ready\":true,\"running\":true,\"state\":\"ready\",\"why\":null},\"statusVerb\":\"swx_status\",\"success\":true,\"surfaceAreaM2\":0.0138,\"surfaceAreaMm2\":13800.0,\"timeoutSeconds\":120,\"volumeM3\":0.000052,\"volumeMm3\":52000.0}", "readiness": { "basedOn": [ "alreadyReadyThisSession" ], "evaluatedAt": "gate", "readsAllowed": true, "ready": true, "running": true, "state": "ready", "why": null }, "schemaVersion": 1, "status": "ok", "statusVerb": "swx_status", "success": true, "surfaceAreaM2": 0.0138, "surfaceAreaMm2": 13800.0, "timeoutSeconds": 120, "volumeM3": 5.2e-05, "volumeMm3": 52000.0 }, "pass": true, "checks": [ { "quantity": "massG", "expected": 410.8, "measured": 410.80000000000007, "offPct": 1.3837248992407013e-14, "pass": true }, { "quantity": "centerOfMassMm", "expected": [ 26.54, 16.54, 20.0 ], "measured": [ 26.538462, 16.538462, 20.0 ], "pass": true } ], "fails": [], "seconds": 7.3 }, { "id": "cswa-05-tool-block-step1", "title": "Official Tool Block, Step 1 (Q3): A 81, B 57, C 43", "official": true, "source": "https://www.solidworks.com/sites/default/files/2017-12/CSWASampleExam.pdf (Dassault CSWA Sample Exam, 2017 edition; archive http://web.archive.org/web/20251230104817/https://www.solidworks.com/sites/default/files/2017-12/CSWASampleExam.pdf)", "expected": { "massG": 939.54, "tolerancePct": 1.0 }, "material": { "name": "AISI 1020", "densityKgM3": 7900 }, "runScript": { "_hint": "Each step reports what it built. Verify with swx_inspect_bodies (the geometry) or swx_mass_properties (the mass) rather than trusting the step list. This document was created by the bridge, so swx_close_doc {save:false} discards the whole thing safely; swx_save_as puts it on disk. A step that fails stops the script and says which one, leaving what was already built in place.", "_timeoutHint": "ab waits up to 420s for this verb before the request times out. If it's a long operation (cloud open / download / export), DON'T treat a timeout as failure \u2014 the work usually keeps running on the bridge. Poll `swx_status` until it reports done.", "bridgeCreatedDocument": true, "created": null, "doc": { "config": "Default", "dirty": true, "path": "C:/Users/drew/AppData/Local/adom-solidworks-bridge/exports/scratch/Part1-1792105365003.SLDPRT", "title": "Part1-1792105365003.SLDPRT", "type": "part" }, "documentName": "Part1-1792105365003.SLDPRT", "durationMs": 6621, "error": "", "ops": [ "new_part", "new_assembly", "clear_part", "sketch", "sketch_rect", "sketch_circle", "extrude", "cut", "set_material", "set_appearance", "fillet", "chamfer", "shell", "revolve", "revolve_cut", "mirror", "hole", "linear_pattern", "circular_pattern", "set_prop", "save_as", "rebuild", "zoom_fit" ], "output": "{\"_hint\":\"Each step reports what it built. Verify with swx_inspect_bodies (the geometry) or swx_mass_properties (the mass) rather than trusting the step list. This document was created by the bridge, so swx_close_doc {save:false} discards the whole thing safely; swx_save_as puts it on disk. A step that fails stops the script and says which one, leaving what was already built in place.\",\"_timeoutHint\":\"ab waits up to 420s for this verb before the request times out. If it's a long operation (cloud open / download / export), DON'T treat a timeout as failure \u2014 the work usually keeps running on the bridge. Poll `swx_status` until it reports done.\",\"bridgeCreatedDocument\":true,\"created\":null,\"doc\":{\"config\":\"Default\",\"dirty\":true,\"path\":\"C:\\\\Users\\\\drew\\\\AppData\\\\Local\\\\adom-solidworks-bridge\\\\exports\\\\scratch\\\\Part1-1792105365003.SLDPRT\",\"title\":\"Part1-1792105365003.SLDPRT\",\"type\":\"part\"},\"documentName\":\"Part1-1792105365003.SLDPRT\",\"ops\":[\"new_part\",\"new_assembly\",\"clear_part\",\"sketch\",\"sketch_rect\",\"sketch_circle\",\"extrude\",\"cut\",\"set_material\",\"set_appearance\",\"fillet\",\"chamfer\",\"shell\",\"revolve\",\"revolve_cut\",\"mirror\",\"hole\",\"linear_pattern\",\"circular_pattern\",\"set_prop\",\"save_as\",\"rebuild\",\"zoom_fit\"],\"progress\":{\"confidence\":\"estimate\",\"elapsedSec\":4.9,\"estimatedSec\":30,\"etaSec\":0,\"percent\":100,\"phase\":\"run_script\",\"startKind\":\"warm\",\"stepLabel\":\"Running 4 modeling step(s)\"},\"readiness\":{\"basedOn\":[\"alreadyReadyThisSession\"],\"evaluatedAt\":\"gate\",\"readsAllowed\":true,\"ready\":true,\"running\":true,\"state\":\"ready\",\"why\":null},\"solidworksRevision\":\"34.3.0\",\"statusVerb\":\"swx_status\",\"stepCount\":4,\"steps\":[{\"op\":\"clear_part\",\"result\":{\"bodiesLeft\":0,\"cleared\":\"Part1-1792105365003.SLDPRT\",\"deleted\":[\"Sketch10\",\"Boss-Extrude7\"],\"featuresDeleted\":2,\"passes\":1,\"proven\":{\"live\":true,\"measuredOn\":[{\"bridge\":\"0.10.6\",\"by\":\"adom\",\"date\":\"2026-10-14\",\"edition\":\"connected\",\"major\":34,\"solidworks\":2026},{\"bridge\":\"0.10.9\",\"by\":\"community\",\"date\":\"2026-10-15\",\"edition\":\"desktop\",\"major\":29,\"solidworks\":2021}],\"variants\":[\"clear_part\"]},\"route\":\"DeleteSelection2(swDelete_Children | swDelete_Absorbed), repeated until the tree is empty\"},\"step\":1},{\"op\":\"sketch\",\"result\":{\"createdPlane\":null,\"entities\":[{\"line\":{\"fromMm\":[0.0,18.0],\"toMm\":[18.243084987875623,14.783251905279968]}},{\"arc\":{\"ccw\":true,\"centerMm\":[21.5424003635473,33.494599212511915],\"endMm\":[38.0,24.0],\"radiusMm\":19.0,\"startMm\":[18.243084987875623,14.783251905279968]}},{\"line\":{\"fromMm\":[38.0,24.0],\"toMm\":[62.00000000000001,24.0]}},{\"line\":{\"fromMm\":[67.0,19.0],\"toMm\":[67.0,0.0]}},{\"line\":{\"fromMm\":[67.0,0.0],\"toMm\":[38.0,-33.0]}},{\"line\":{\"fromMm\":[38.0,-33.0],\"toMm\":[32.788067396763054,-33.0]}},{\"arc\":{\"ccw\":false,\"centerMm\":[54.69696969696975,-13.999999999999972],\"endMm\":[26.012264996781063,-18.264705882352946],\"radiusMm\":29.000000000000053,\"startMm\":[32.788067396763054,-33.0]}},{\"arc\":{\"ccw\":true,\"centerMm\":[21.066626255369176,-18.999999999999964],\"endMm\":[21.06662625536923,-14.0],\"radiusMm\":5.000000000000048,\"startMm\":[26.012264996781063,-18.264705882352946]}},{\"line\":{\"fromMm\":[21.06662625536923,-14.0],\"toMm\":[-7.0,-14.0]}},{\"line\":{\"fromMm\":[-14.0,-7.0],\"toMm\":[-14.0,11.000000000000002]}},{\"line\":{\"fromMm\":[-7.0,18.0],\"toMm\":[0.0,18.0]}},{\"line\":{\"fromMm\":[-14.0,11.000000000000002],\"toMm\":[-7.0,18.0]}},{\"line\":{\"fromMm\":[-7.0,-14.0],\"toMm\":[-14.0,-7.0]}},{\"line\":{\"fromMm\":[62.00000000000001,24.0],\"toMm\":[67.0,19.0]}},{\"circle\":{\"centerMm\":[0.0,0.0],\"radiusMm\":7.0}}],\"mapped\":false,\"plane\":\"Front Plane\",\"planeFrames\":\"plane transforms (they match the measured Front/Top axes)\",\"proven\":{\"live\":false,\"measuredOn\":[],\"unmeasured\":[{\"variant\":\"sketch.line\",\"what\":\"lines of a closed contour (line, polyline, polygon, slot, rounded rect): ISketchManager::CreateLine\"},{\"variant\":\"sketch.arc\",\"what\":\"arcs of a closed contour (arc, arc3, tangentArc, slot, rounded rect): ISketchManager::CreateArc\"}],\"variants\":[\"sketch.plane.front\",\"sketch.circle\",\"sketch.multiProfile\",\"sketch.line\",\"sketch.arc\"],\"why\":\"not measured live: see `unmeasured` \u2014 verify this step's geometry with swx_inspect_bodies\"},\"resolvedPlane\":null,\"sketch\":\"Sketch11\",\"sketchNormal\":[0.0,0.0,1.0],\"sketchedOn\":\"Front Plane\",\"transformInverted\":false},\"step\":2},{\"op\":\"extrude\",\"result\":{\"depth2Mm\":null,\"depthMm\":43.0,\"dir\":{\"flippedToFollowTheReference\":false,\"reference\":null,\"sketchNormal\":[0.0,0.0,1.0],\"value\":false},\"direction\":\"one\",\"draftDeg\":null,\"draftInward\":null,\"endCondition\":0,\"feature\":\"Boss-Extrude8\",\"proven\":{\"live\":true,\"measuredOn\":[{\"bridge\":\"0.10.3\",\"by\":\"adom\",\"date\":\"2026-10-14\",\"edition\":\"connected\",\"major\":34,\"solidworks\":2026},{\"bridge\":\"0.10.9\",\"by\":\"community\",\"date\":\"2026-10-15\",\"edition\":\"desktop\",\"major\":29,\"solidworks\":2021}],\"variants\":[\"extrude.one\"]},\"reverse\":false,\"sketch\":\"Sketch11\",\"throughAll\":false,\"upToFace\":null},\"step\":3},{\"op\":\"set_material\",\"result\":{\"appearanceReapplied\":[],\"current\":{\"database\":\"SOLIDWORKS Materials\",\"name\":\"AISI 1020\"},\"database\":\"SOLIDWORKS Materials.sldmat\",\"densityKgM3\":7900.0,\"densityRequested\":7900.0,\"material\":\"AISI 1020\",\"proven\":{\"live\":false,\"measuredOn\":[],\"unmeasured\":[{\"variant\":\"set_material.density\",\"what\":\"a density in kg/m\u00b3 (the document's own, or checked against the material's)\"}],\"variants\":[\"set_material\",\"set_material.density\"],\"why\":\"not measured live: see `unmeasured` \u2014 verify this step's geometry with swx_inspect_bodies\"}},\"step\":4}],\"success\":true,\"targetDocument\":\"Part1-1792105365003.SLDPRT\",\"timeoutSeconds\":420}", "progress": { "confidence": "estimate", "elapsedSec": 4.9, "estimatedSec": 30, "etaSec": 0, "percent": 100, "phase": "run_script", "startKind": "warm", "stepLabel": "Running 4 modeling step(s)" }, "readiness": { "basedOn": [ "alreadyReadyThisSession" ], "evaluatedAt": "gate", "readsAllowed": true, "ready": true, "running": true, "state": "ready", "why": null }, "schemaVersion": 1, "solidworksRevision": "34.3.0", "status": "ok", "statusVerb": "swx_status", "stepCount": 4, "steps": [ { "op": "clear_part", "result": { "bodiesLeft": 0, "cleared": "Part1-1792105365003.SLDPRT", "deleted": [ "Sketch10", "Boss-Extrude7" ], "featuresDeleted": 2, "passes": 1, "proven": { "live": true, "measuredOn": [ { "bridge": "0.10.6", "by": "adom", "date": "2026-10-14", "edition": "connected", "major": 34, "solidworks": 2026 }, { "bridge": "0.10.9", "by": "community", "date": "2026-10-15", "edition": "desktop", "major": 29, "solidworks": 2021 } ], "variants": [ "clear_part" ] }, "route": "DeleteSelection2(swDelete_Children | swDelete_Absorbed), repeated until the tree is empty" }, "step": 1 }, { "op": "sketch", "result": { "createdPlane": null, "entities": [ { "line": { "fromMm": [ 0.0, 18.0 ], "toMm": [ 18.243084987875623, 14.783251905279968 ] } }, { "arc": { "ccw": true, "centerMm": [ 21.5424003635473, 33.494599212511915 ], "endMm": [ 38.0, 24.0 ], "radiusMm": 19.0, "startMm": [ 18.243084987875623, 14.783251905279968 ] } }, { "line": { "fromMm": [ 38.0, 24.0 ], "toMm": [ 62.00000000000001, 24.0 ] } }, { "line": { "fromMm": [ 67.0, 19.0 ], "toMm": [ 67.0, 0.0 ] } }, { "line": { "fromMm": [ 67.0, 0.0 ], "toMm": [ 38.0, -33.0 ] } }, { "line": { "fromMm": [ 38.0, -33.0 ], "toMm": [ 32.788067396763054, -33.0 ] } }, { "arc": { "ccw": false, "centerMm": [ 54.69696969696975, -13.999999999999972 ], "endMm": [ 26.012264996781063, -18.264705882352946 ], "radiusMm": 29.000000000000053, "startMm": [ 32.788067396763054, -33.0 ] } }, { "arc": { "ccw": true, "centerMm": [ 21.066626255369176, -18.999999999999964 ], "endMm": [ 21.06662625536923, -14.0 ], "radiusMm": 5.000000000000048, "startMm": [ 26.012264996781063, -18.264705882352946 ] } }, { "line": { "fromMm": [ 21.06662625536923, -14.0 ], "toMm": [ -7.0, -14.0 ] } }, { "line": { "fromMm": [ -14.0, -7.0 ], "toMm": [ -14.0, 11.000000000000002 ] } }, { "line": { "fromMm": [ -7.0, 18.0 ], "toMm": [ 0.0, 18.0 ] } }, { "line": { "fromMm": [ -14.0, 11.000000000000002 ], "toMm": [ -7.0, 18.0 ] } }, { "line": { "fromMm": [ -7.0, -14.0 ], "toMm": [ -14.0, -7.0 ] } }, { "line": { "fromMm": [ 62.00000000000001, 24.0 ], "toMm": [ 67.0, 19.0 ] } }, { "circle": { "centerMm": [ 0.0, 0.0 ], "radiusMm": 7.0 } } ], "mapped": false, "plane": "Front Plane", "planeFrames": "plane transforms (they match the measured Front/Top axes)", "proven": { "live": false, "measuredOn": [], "unmeasured": [ { "variant": "sketch.line", "what": "lines of a closed contour (line, polyline, polygon, slot, rounded rect): ISketchManager::CreateLine" }, { "variant": "sketch.arc", "what": "arcs of a closed contour (arc, arc3, tangentArc, slot, rounded rect): ISketchManager::CreateArc" } ], "variants": [ "sketch.plane.front", "sketch.circle", "sketch.multiProfile", "sketch.line", "sketch.arc" ], "why": "not measured live: see `unmeasured` \u2014 verify this step's geometry with swx_inspect_bodies" }, "resolvedPlane": null, "sketch": "Sketch11", "sketchNormal": [ 0.0, 0.0, 1.0 ], "sketchedOn": "Front Plane", "transformInverted": false }, "step": 2 }, { "op": "extrude", "result": { "depth2Mm": null, "depthMm": 43.0, "dir": { "flippedToFollowTheReference": false, "reference": null, "sketchNormal": [ 0.0, 0.0, 1.0 ], "value": false }, "direction": "one", "draftDeg": null, "draftInward": null, "endCondition": 0, "feature": "Boss-Extrude8", "proven": { "live": true, "measuredOn": [ { "bridge": "0.10.3", "by": "adom", "date": "2026-10-14", "edition": "connected", "major": 34, "solidworks": 2026 }, { "bridge": "0.10.9", "by": "community", "date": "2026-10-15", "edition": "desktop", "major": 29, "solidworks": 2021 } ], "variants": [ "extrude.one" ] }, "reverse": false, "sketch": "Sketch11", "throughAll": false, "upToFace": null }, "step": 3 }, { "op": "set_material", "result": { "appearanceReapplied": [], "current": { "database": "SOLIDWORKS Materials", "name": "AISI 1020" }, "database": "SOLIDWORKS Materials.sldmat", "densityKgM3": 7900.0, "densityRequested": 7900.0, "material": "AISI 1020", "proven": { "live": false, "measuredOn": [], "unmeasured": [ { "variant": "set_material.density", "what": "a density in kg/m\u00b3 (the document's own, or checked against the material's)" } ], "variants": [ "set_material", "set_material.density" ], "why": "not measured live: see `unmeasured` \u2014 verify this step's geometry with swx_inspect_bodies" } }, "step": 4 } ], "success": true, "targetDocument": "Part1-1792105365003.SLDPRT", "timeoutSeconds": 420 }, "massProperties": { "_hint": "SI units: kg, m^3, m^2, m. Mass is only as good as the material assignment \u2014 a 0 or default density means no material is set on the model, so report the density alongside the mass.", "_timeoutHint": "ab waits up to 120s for this verb before the request times out. If it's a long operation (cloud open / download / export), DON'T treat a timeout as failure \u2014 the work usually keeps running on the bridge. Poll `swx_status` until it reports done.", "boundingBox": [ -0.014, -0.033, 0.0, 0.067, 0.024, 0.043 ], "centerOfMass": [ 0.03062236692252704, 0.0003076468646468399, 0.0215 ], "centerOfMassMm": [ 30.622367, 0.307647, 21.5 ], "density": 7900.0, "densityKgM3": 7900.0, "doc": { "config": "Default", "dirty": true, "path": "C:/Users/drew/AppData/Local/adom-solidworks-bridge/exports/scratch/Part1-1792105365003.SLDPRT", "title": "Part1-1792105365003.SLDPRT", "type": "part" }, "durationMs": 1094, "error": "", "massG": 939.5395682014018, "massKg": 0.9395395682014018, "materialName": "AISI 1020", "output": "{\"_hint\":\"SI units: kg, m^3, m^2, m. Mass is only as good as the material assignment \u2014 a 0 or default density means no material is set on the model, so report the density alongside the mass.\",\"_timeoutHint\":\"ab waits up to 120s for this verb before the request times out. If it's a long operation (cloud open / download / export), DON'T treat a timeout as failure \u2014 the work usually keeps running on the bridge. Poll `swx_status` until it reports done.\",\"boundingBox\":[-0.014,-0.033,0.0,0.067,0.024,0.043],\"centerOfMass\":[0.03062236692252704,0.0003076468646468399,0.0215],\"centerOfMassMm\":[30.622367,0.307647,21.5],\"density\":7900.0,\"densityKgM3\":7900.0,\"doc\":{\"config\":\"Default\",\"dirty\":true,\"path\":\"C:\\\\Users\\\\drew\\\\AppData\\\\Local\\\\adom-solidworks-bridge\\\\exports\\\\scratch\\\\Part1-1792105365003.SLDPRT\",\"title\":\"Part1-1792105365003.SLDPRT\",\"type\":\"part\"},\"massG\":939.5395682014018,\"massKg\":0.9395395682014018,\"materialName\":\"AISI 1020\",\"readiness\":{\"basedOn\":[\"alreadyReadyThisSession\"],\"evaluatedAt\":\"gate\",\"readsAllowed\":true,\"ready\":true,\"running\":true,\"state\":\"ready\",\"why\":null},\"statusVerb\":\"swx_status\",\"success\":true,\"surfaceAreaM2\":0.01763006429786853,\"surfaceAreaMm2\":17630.06429786853,\"timeoutSeconds\":120,\"volumeM3\":0.00011892905926600024,\"volumeMm3\":118929.05926600024}", "readiness": { "basedOn": [ "alreadyReadyThisSession" ], "evaluatedAt": "gate", "readsAllowed": true, "ready": true, "running": true, "state": "ready", "why": null }, "schemaVersion": 1, "status": "ok", "statusVerb": "swx_status", "success": true, "surfaceAreaM2": 0.01763006429786853, "surfaceAreaMm2": 17630.06429786853, "timeoutSeconds": 120, "volumeM3": 0.00011892905926600024, "volumeMm3": 118929.05926600024 }, "pass": true, "checks": [ { "quantity": "massG", "expected": 939.54, "measured": 939.5395682014018, "offPct": 4.595851141290499e-05, "pass": true } ], "fails": [], "seconds": 7.7 }, { "id": "cswa-06-tool-block-step2", "title": "Official Tool Block, Step 2 (Q4): A 84, B 59, C 45, all other dimensions the same", "official": true, "source": "https://www.solidworks.com/sites/default/files/2017-12/CSWASampleExam.pdf (Dassault CSWA Sample Exam, 2017 edition; archive http://web.archive.org/web/20251230104817/https://www.solidworks.com/sites/default/files/2017-12/CSWASampleExam.pdf)", "expected": { "massG": 1032.32, "tolerancePct": 1.0 }, "material": { "name": "AISI 1020", "densityKgM3": 7900 }, "runScript": { "_hint": "Each step reports what it built. Verify with swx_inspect_bodies (the geometry) or swx_mass_properties (the mass) rather than trusting the step list. This document was created by the bridge, so swx_close_doc {save:false} discards the whole thing safely; swx_save_as puts it on disk. A step that fails stops the script and says which one, leaving what was already built in place.", "_timeoutHint": "ab waits up to 420s for this verb before the request times out. If it's a long operation (cloud open / download / export), DON'T treat a timeout as failure \u2014 the work usually keeps running on the bridge. Poll `swx_status` until it reports done.", "bridgeCreatedDocument": true, "created": null, "doc": { "config": "Default", "dirty": true, "path": "C:/Users/drew/AppData/Local/adom-solidworks-bridge/exports/scratch/Part1-1792105365003.SLDPRT", "title": "Part1-1792105365003.SLDPRT", "type": "part" }, "documentName": "Part1-1792105365003.SLDPRT", "durationMs": 6408, "error": "", "ops": [ "new_part", "new_assembly", "clear_part", "sketch", "sketch_rect", "sketch_circle", "extrude", "cut", "set_material", "set_appearance", "fillet", "chamfer", "shell", "revolve", "revolve_cut", "mirror", "hole", "linear_pattern", "circular_pattern", "set_prop", "save_as", "rebuild", "zoom_fit" ], "output": "{\"_hint\":\"Each step reports what it built. Verify with swx_inspect_bodies (the geometry) or swx_mass_properties (the mass) rather than trusting the step list. This document was created by the bridge, so swx_close_doc {save:false} discards the whole thing safely; swx_save_as puts it on disk. A step that fails stops the script and says which one, leaving what was already built in place.\",\"_timeoutHint\":\"ab waits up to 420s for this verb before the request times out. If it's a long operation (cloud open / download / export), DON'T treat a timeout as failure \u2014 the work usually keeps running on the bridge. Poll `swx_status` until it reports done.\",\"bridgeCreatedDocument\":true,\"created\":null,\"doc\":{\"config\":\"Default\",\"dirty\":true,\"path\":\"C:\\\\Users\\\\drew\\\\AppData\\\\Local\\\\adom-solidworks-bridge\\\\exports\\\\scratch\\\\Part1-1792105365003.SLDPRT\",\"title\":\"Part1-1792105365003.SLDPRT\",\"type\":\"part\"},\"documentName\":\"Part1-1792105365003.SLDPRT\",\"ops\":[\"new_part\",\"new_assembly\",\"clear_part\",\"sketch\",\"sketch_rect\",\"sketch_circle\",\"extrude\",\"cut\",\"set_material\",\"set_appearance\",\"fillet\",\"chamfer\",\"shell\",\"revolve\",\"revolve_cut\",\"mirror\",\"hole\",\"linear_pattern\",\"circular_pattern\",\"set_prop\",\"save_as\",\"rebuild\",\"zoom_fit\"],\"progress\":{\"confidence\":\"estimate\",\"elapsedSec\":4.7,\"estimatedSec\":30,\"etaSec\":0,\"percent\":100,\"phase\":\"run_script\",\"startKind\":\"warm\",\"stepLabel\":\"Running 4 modeling step(s)\"},\"readiness\":{\"basedOn\":[\"alreadyReadyThisSession\"],\"evaluatedAt\":\"gate\",\"readsAllowed\":true,\"ready\":true,\"running\":true,\"state\":\"ready\",\"why\":null},\"solidworksRevision\":\"34.3.0\",\"statusVerb\":\"swx_status\",\"stepCount\":4,\"steps\":[{\"op\":\"clear_part\",\"result\":{\"bodiesLeft\":0,\"cleared\":\"Part1-1792105365003.SLDPRT\",\"deleted\":[\"Sketch11\",\"Boss-Extrude8\"],\"featuresDeleted\":2,\"passes\":1,\"proven\":{\"live\":true,\"measuredOn\":[{\"bridge\":\"0.10.6\",\"by\":\"adom\",\"date\":\"2026-10-14\",\"edition\":\"connected\",\"major\":34,\"solidworks\":2026},{\"bridge\":\"0.10.9\",\"by\":\"community\",\"date\":\"2026-10-15\",\"edition\":\"desktop\",\"major\":29,\"solidworks\":2021}],\"variants\":[\"clear_part\"]},\"route\":\"DeleteSelection2(swDelete_Children | swDelete_Absorbed), repeated until the tree is empty\"},\"step\":1},{\"op\":\"sketch\",\"result\":{\"createdPlane\":null,\"entities\":[{\"line\":{\"fromMm\":[0.0,18.0],\"toMm\":[20.10404235201319,14.455114912034407]}},{\"arc\":{\"ccw\":true,\"centerMm\":[23.40335772768487,33.166462219266364],\"endMm\":[41.0,26.0],\"radiusMm\":19.0,\"startMm\":[20.10404235201319,14.455114912034407]}},{\"line\":{\"fromMm\":[41.0,26.0],\"toMm\":[65.0,26.0]}},{\"line\":{\"fromMm\":[70.0,21.0],\"toMm\":[70.0,2.0]}},{\"line\":{\"fromMm\":[70.0,2.0],\"toMm\":[41.0,-33.0]}},{\"line\":{\"fromMm\":[41.0,-33.0],\"toMm\":[34.8339548426505,-33.0]}},{\"arc\":{\"ccw\":false,\"centerMm\":[56.74285714285731,-14.000000000000036],\"endMm\":[28.0581524426685,-18.264705882352946],\"radiusMm\":29.000000000000107,\"startMm\":[34.8339548426505,-33.0]}},{\"arc\":{\"ccw\":true,\"centerMm\":[23.112513701256617,-18.999999999999982],\"endMm\":[23.112513701256667,-14.0],\"radiusMm\":5.0000000000000515,\"startMm\":[28.0581524426685,-18.264705882352946]}},{\"line\":{\"fromMm\":[23.112513701256667,-14.0],\"toMm\":[-7.0,-14.0]}},{\"line\":{\"fromMm\":[-14.0,-7.0],\"toMm\":[-14.0,11.000000000000002]}},{\"line\":{\"fromMm\":[-7.0,18.0],\"toMm\":[0.0,18.0]}},{\"line\":{\"fromMm\":[-14.0,11.000000000000002],\"toMm\":[-7.0,18.0]}},{\"line\":{\"fromMm\":[-7.0,-14.0],\"toMm\":[-14.0,-7.0]}},{\"line\":{\"fromMm\":[65.0,26.0],\"toMm\":[70.0,21.0]}},{\"circle\":{\"centerMm\":[0.0,0.0],\"radiusMm\":7.0}}],\"mapped\":false,\"plane\":\"Front Plane\",\"planeFrames\":\"plane transforms (they match the measured Front/Top axes)\",\"proven\":{\"live\":false,\"measuredOn\":[],\"unmeasured\":[{\"variant\":\"sketch.line\",\"what\":\"lines of a closed contour (line, polyline, polygon, slot, rounded rect): ISketchManager::CreateLine\"},{\"variant\":\"sketch.arc\",\"what\":\"arcs of a closed contour (arc, arc3, tangentArc, slot, rounded rect): ISketchManager::CreateArc\"}],\"variants\":[\"sketch.plane.front\",\"sketch.circle\",\"sketch.multiProfile\",\"sketch.line\",\"sketch.arc\"],\"why\":\"not measured live: see `unmeasured` \u2014 verify this step's geometry with swx_inspect_bodies\"},\"resolvedPlane\":null,\"sketch\":\"Sketch12\",\"sketchNormal\":[0.0,0.0,1.0],\"sketchedOn\":\"Front Plane\",\"transformInverted\":false},\"step\":2},{\"op\":\"extrude\",\"result\":{\"depth2Mm\":null,\"depthMm\":45.0,\"dir\":{\"flippedToFollowTheReference\":false,\"reference\":null,\"sketchNormal\":[0.0,0.0,1.0],\"value\":false},\"direction\":\"one\",\"draftDeg\":null,\"draftInward\":null,\"endCondition\":0,\"feature\":\"Boss-Extrude9\",\"proven\":{\"live\":true,\"measuredOn\":[{\"bridge\":\"0.10.3\",\"by\":\"adom\",\"date\":\"2026-10-14\",\"edition\":\"connected\",\"major\":34,\"solidworks\":2026},{\"bridge\":\"0.10.9\",\"by\":\"community\",\"date\":\"2026-10-15\",\"edition\":\"desktop\",\"major\":29,\"solidworks\":2021}],\"variants\":[\"extrude.one\"]},\"reverse\":false,\"sketch\":\"Sketch12\",\"throughAll\":false,\"upToFace\":null},\"step\":3},{\"op\":\"set_material\",\"result\":{\"appearanceReapplied\":[],\"current\":{\"database\":\"SOLIDWORKS Materials\",\"name\":\"AISI 1020\"},\"database\":\"SOLIDWORKS Materials.sldmat\",\"densityKgM3\":7899.999999999999,\"densityRequested\":7900.0,\"material\":\"AISI 1020\",\"proven\":{\"live\":false,\"measuredOn\":[],\"unmeasured\":[{\"variant\":\"set_material.density\",\"what\":\"a density in kg/m\u00b3 (the document's own, or checked against the material's)\"}],\"variants\":[\"set_material\",\"set_material.density\"],\"why\":\"not measured live: see `unmeasured` \u2014 verify this step's geometry with swx_inspect_bodies\"}},\"step\":4}],\"success\":true,\"targetDocument\":\"Part1-1792105365003.SLDPRT\",\"timeoutSeconds\":420}", "progress": { "confidence": "estimate", "elapsedSec": 4.7, "estimatedSec": 30, "etaSec": 0, "percent": 100, "phase": "run_script", "startKind": "warm", "stepLabel": "Running 4 modeling step(s)" }, "readiness": { "basedOn": [ "alreadyReadyThisSession" ], "evaluatedAt": "gate", "readsAllowed": true, "ready": true, "running": true, "state": "ready", "why": null }, "schemaVersion": 1, "solidworksRevision": "34.3.0", "status": "ok", "statusVerb": "swx_status", "stepCount": 4, "steps": [ { "op": "clear_part", "result": { "bodiesLeft": 0, "cleared": "Part1-1792105365003.SLDPRT", "deleted": [ "Sketch11", "Boss-Extrude8" ], "featuresDeleted": 2, "passes": 1, "proven": { "live": true, "measuredOn": [ { "bridge": "0.10.6", "by": "adom", "date": "2026-10-14", "edition": "connected", "major": 34, "solidworks": 2026 }, { "bridge": "0.10.9", "by": "community", "date": "2026-10-15", "edition": "desktop", "major": 29, "solidworks": 2021 } ], "variants": [ "clear_part" ] }, "route": "DeleteSelection2(swDelete_Children | swDelete_Absorbed), repeated until the tree is empty" }, "step": 1 }, { "op": "sketch", "result": { "createdPlane": null, "entities": [ { "line": { "fromMm": [ 0.0, 18.0 ], "toMm": [ 20.10404235201319, 14.455114912034407 ] } }, { "arc": { "ccw": true, "centerMm": [ 23.40335772768487, 33.166462219266364 ], "endMm": [ 41.0, 26.0 ], "radiusMm": 19.0, "startMm": [ 20.10404235201319, 14.455114912034407 ] } }, { "line": { "fromMm": [ 41.0, 26.0 ], "toMm": [ 65.0, 26.0 ] } }, { "line": { "fromMm": [ 70.0, 21.0 ], "toMm": [ 70.0, 2.0 ] } }, { "line": { "fromMm": [ 70.0, 2.0 ], "toMm": [ 41.0, -33.0 ] } }, { "line": { "fromMm": [ 41.0, -33.0 ], "toMm": [ 34.8339548426505, -33.0 ] } }, { "arc": { "ccw": false, "centerMm": [ 56.74285714285731, -14.000000000000036 ], "endMm": [ 28.0581524426685, -18.264705882352946 ], "radiusMm": 29.000000000000107, "startMm": [ 34.8339548426505, -33.0 ] } }, { "arc": { "ccw": true, "centerMm": [ 23.112513701256617, -18.999999999999982 ], "endMm": [ 23.112513701256667, -14.0 ], "radiusMm": 5.0000000000000515, "startMm": [ 28.0581524426685, -18.264705882352946 ] } }, { "line": { "fromMm": [ 23.112513701256667, -14.0 ], "toMm": [ -7.0, -14.0 ] } }, { "line": { "fromMm": [ -14.0, -7.0 ], "toMm": [ -14.0, 11.000000000000002 ] } }, { "line": { "fromMm": [ -7.0, 18.0 ], "toMm": [ 0.0, 18.0 ] } }, { "line": { "fromMm": [ -14.0, 11.000000000000002 ], "toMm": [ -7.0, 18.0 ] } }, { "line": { "fromMm": [ -7.0, -14.0 ], "toMm": [ -14.0, -7.0 ] } }, { "line": { "fromMm": [ 65.0, 26.0 ], "toMm": [ 70.0, 21.0 ] } }, { "circle": { "centerMm": [ 0.0, 0.0 ], "radiusMm": 7.0 } } ], "mapped": false, "plane": "Front Plane", "planeFrames": "plane transforms (they match the measured Front/Top axes)", "proven": { "live": false, "measuredOn": [], "unmeasured": [ { "variant": "sketch.line", "what": "lines of a closed contour (line, polyline, polygon, slot, rounded rect): ISketchManager::CreateLine" }, { "variant": "sketch.arc", "what": "arcs of a closed contour (arc, arc3, tangentArc, slot, rounded rect): ISketchManager::CreateArc" } ], "variants": [ "sketch.plane.front", "sketch.circle", "sketch.multiProfile", "sketch.line", "sketch.arc" ], "why": "not measured live: see `unmeasured` \u2014 verify this step's geometry with swx_inspect_bodies" }, "resolvedPlane": null, "sketch": "Sketch12", "sketchNormal": [ 0.0, 0.0, 1.0 ], "sketchedOn": "Front Plane", "transformInverted": false }, "step": 2 }, { "op": "extrude", "result": { "depth2Mm": null, "depthMm": 45.0, "dir": { "flippedToFollowTheReference": false, "reference": null, "sketchNormal": [ 0.0, 0.0, 1.0 ], "value": false }, "direction": "one", "draftDeg": null, "draftInward": null, "endCondition": 0, "feature": "Boss-Extrude9", "proven": { "live": true, "measuredOn": [ { "bridge": "0.10.3", "by": "adom", "date": "2026-10-14", "edition": "connected", "major": 34, "solidworks": 2026 }, { "bridge": "0.10.9", "by": "community", "date": "2026-10-15", "edition": "desktop", "major": 29, "solidworks": 2021 } ], "variants": [ "extrude.one" ] }, "reverse": false, "sketch": "Sketch12", "throughAll": false, "upToFace": null }, "step": 3 }, { "op": "set_material", "result": { "appearanceReapplied": [], "current": { "database": "SOLIDWORKS Materials", "name": "AISI 1020" }, "database": "SOLIDWORKS Materials.sldmat", "densityKgM3": 7899.999999999999, "densityRequested": 7900.0, "material": "AISI 1020", "proven": { "live": false, "measuredOn": [], "unmeasured": [ { "variant": "set_material.density", "what": "a density in kg/m\u00b3 (the document's own, or checked against the material's)" } ], "variants": [ "set_material", "set_material.density" ], "why": "not measured live: see `unmeasured` \u2014 verify this step's geometry with swx_inspect_bodies" } }, "step": 4 } ], "success": true, "targetDocument": "Part1-1792105365003.SLDPRT", "timeoutSeconds": 420 }, "massProperties": { "_hint": "SI units: kg, m^3, m^2, m. Mass is only as good as the material assignment \u2014 a 0 or default density means no material is set on the model, so report the density alongside the mass.", "_timeoutHint": "ab waits up to 120s for this verb before the request times out. If it's a long operation (cloud open / download / export), DON'T treat a timeout as failure \u2014 the work usually keeps running on the bridge. Poll `swx_status` until it reports done.", "boundingBox": [ -0.014, -0.033, 0.0, 0.07, 0.026, 0.045 ], "centerOfMass": [ 0.03255336787850931, 0.0007907183444125464, 0.0225 ], "centerOfMassMm": [ 32.553368, 0.790718, 22.5 ], "density": 7899.999999999999, "densityKgM3": 7899.999999999999, "doc": { "config": "Default", "dirty": true, "path": "C:/Users/drew/AppData/Local/adom-solidworks-bridge/exports/scratch/Part1-1792105365003.SLDPRT", "title": "Part1-1792105365003.SLDPRT", "type": "part" }, "durationMs": 1037, "error": "", "massG": 1032.3206766712835, "massKg": 1.0323206766712836, "materialName": "AISI 1020", "output": "{\"_hint\":\"SI units: kg, m^3, m^2, m. Mass is only as good as the material assignment \u2014 a 0 or default density means no material is set on the model, so report the density alongside the mass.\",\"_timeoutHint\":\"ab waits up to 120s for this verb before the request times out. If it's a long operation (cloud open / download / export), DON'T treat a timeout as failure \u2014 the work usually keeps running on the bridge. Poll `swx_status` until it reports done.\",\"boundingBox\":[-0.014,-0.033,0.0,0.07,0.026,0.045],\"centerOfMass\":[0.03255336787850931,0.0007907183444125464,0.0225],\"centerOfMassMm\":[32.553368,0.790718,22.5],\"density\":7899.999999999999,\"densityKgM3\":7899.999999999999,\"doc\":{\"config\":\"Default\",\"dirty\":true,\"path\":\"C:\\\\Users\\\\drew\\\\AppData\\\\Local\\\\adom-solidworks-bridge\\\\exports\\\\scratch\\\\Part1-1792105365003.SLDPRT\",\"title\":\"Part1-1792105365003.SLDPRT\",\"type\":\"part\"},\"massG\":1032.3206766712835,\"massKg\":1.0323206766712836,\"materialName\":\"AISI 1020\",\"readiness\":{\"basedOn\":[\"alreadyReadyThisSession\"],\"evaluatedAt\":\"gate\",\"readsAllowed\":true,\"ready\":true,\"running\":true,\"state\":\"ready\",\"why\":null},\"statusVerb\":\"swx_status\",\"success\":true,\"surfaceAreaM2\":0.0188741376700506,\"surfaceAreaMm2\":18874.137670050597,\"timeoutSeconds\":120,\"volumeM3\":0.00013067350337611186,\"volumeMm3\":130673.50337611184}", "readiness": { "basedOn": [ "alreadyReadyThisSession" ], "evaluatedAt": "gate", "readsAllowed": true, "ready": true, "running": true, "state": "ready", "why": null }, "schemaVersion": 1, "status": "ok", "statusVerb": "swx_status", "success": true, "surfaceAreaM2": 0.0188741376700506, "surfaceAreaMm2": 18874.137670050597, "timeoutSeconds": 120, "volumeM3": 0.00013067350337611186, "volumeMm3": 130673.50337611184 }, "pass": true, "checks": [ { "quantity": "massG", "expected": 1032.32, "measured": 1032.3206766712835, "offPct": 6.55485976828616e-05, "pass": true } ], "fails": [], "seconds": 7.5 }, { "id": "cswa-07-tool-block-step3", "title": "Official Tool Block, Step 3 (Q5): A 86, B 58, C 44, then remove material", "official": true, "source": "https://www.solidworks.com/sites/default/files/2017-12/CSWASampleExam.pdf (Dassault CSWA Sample Exam, 2017 edition; archive http://web.archive.org/web/20251230104817/https://www.solidworks.com/sites/default/files/2017-12/CSWASampleExam.pdf)", "expected": { "massG": 628.18, "tolerancePct": 1.0 }, "material": { "name": "AISI 1020", "densityKgM3": 7900 }, "runScript": { "_hint": "Each step reports what it built. Verify with swx_inspect_bodies (the geometry) or swx_mass_properties (the mass) rather than trusting the step list. This document was created by the bridge, so swx_close_doc {save:false} discards the whole thing safely; swx_save_as puts it on disk. A step that fails stops the script and says which one, leaving what was already built in place.", "_timeoutHint": "ab waits up to 420s for this verb before the request times out. If it's a long operation (cloud open / download / export), DON'T treat a timeout as failure \u2014 the work usually keeps running on the bridge. Poll `swx_status` until it reports done.", "bridgeCreatedDocument": true, "created": null, "doc": { "config": "Default", "dirty": true, "path": "C:/Users/drew/AppData/Local/adom-solidworks-bridge/exports/scratch/Part1-1792105365003.SLDPRT", "title": "Part1-1792105365003.SLDPRT", "type": "part" }, "documentName": "Part1-1792105365003.SLDPRT", "durationMs": 20797, "error": "", "ops": [ "new_part", "new_assembly", "clear_part", "sketch", "sketch_rect", "sketch_circle", "extrude", "cut", "set_material", "set_appearance", "fillet", "chamfer", "shell", "revolve", "revolve_cut", "mirror", "hole", "linear_pattern", "circular_pattern", "set_prop", "save_as", "rebuild", "zoom_fit" ], "output": "{\"_hint\":\"Each step reports what it built. Verify with swx_inspect_bodies (the geometry) or swx_mass_properties (the mass) rather than trusting the step list. This document was created by the bridge, so swx_close_doc {save:false} discards the whole thing safely; swx_save_as puts it on disk. A step that fails stops the script and says which one, leaving what was already built in place.\",\"_timeoutHint\":\"ab waits up to 420s for this verb before the request times out. If it's a long operation (cloud open / download / export), DON'T treat a timeout as failure \u2014 the work usually keeps running on the bridge. Poll `swx_status` until it reports done.\",\"bridgeCreatedDocument\":true,\"created\":null,\"doc\":{\"config\":\"Default\",\"dirty\":true,\"path\":\"C:\\\\Users\\\\drew\\\\AppData\\\\Local\\\\adom-solidworks-bridge\\\\exports\\\\scratch\\\\Part1-1792105365003.SLDPRT\",\"title\":\"Part1-1792105365003.SLDPRT\",\"type\":\"part\"},\"documentName\":\"Part1-1792105365003.SLDPRT\",\"ops\":[\"new_part\",\"new_assembly\",\"clear_part\",\"sketch\",\"sketch_rect\",\"sketch_circle\",\"extrude\",\"cut\",\"set_material\",\"set_appearance\",\"fillet\",\"chamfer\",\"shell\",\"revolve\",\"revolve_cut\",\"mirror\",\"hole\",\"linear_pattern\",\"circular_pattern\",\"set_prop\",\"save_as\",\"rebuild\",\"zoom_fit\"],\"progress\":{\"confidence\":\"estimate\",\"elapsedSec\":18.7,\"estimatedSec\":30,\"etaSec\":0,\"percent\":100,\"phase\":\"run_script\",\"startKind\":\"warm\",\"stepLabel\":\"Running 11 modeling step(s)\"},\"readiness\":{\"basedOn\":[\"alreadyReadyThisSession\"],\"evaluatedAt\":\"gate\",\"readsAllowed\":true,\"ready\":true,\"running\":true,\"state\":\"ready\",\"why\":null},\"solidworksRevision\":\"34.3.0\",\"statusVerb\":\"swx_status\",\"stepCount\":11,\"steps\":[{\"op\":\"clear_part\",\"result\":{\"bodiesLeft\":0,\"cleared\":\"Part1-1792105365003.SLDPRT\",\"deleted\":[\"Sketch12\",\"Boss-Extrude9\"],\"featuresDeleted\":2,\"passes\":1,\"proven\":{\"live\":true,\"measuredOn\":[{\"bridge\":\"0.10.6\",\"by\":\"adom\",\"date\":\"2026-10-14\",\"edition\":\"connected\",\"major\":34,\"solidworks\":2026},{\"bridge\":\"0.10.9\",\"by\":\"community\",\"date\":\"2026-10-15\",\"edition\":\"desktop\",\"major\":29,\"solidworks\":2021}],\"variants\":[\"clear_part\"]},\"route\":\"DeleteSelection2(swDelete_Children | swDelete_Absorbed), repeated until the tree is empty\"},\"step\":1},{\"op\":\"sketch\",\"result\":{\"createdPlane\":null,\"entities\":[{\"line\":{\"fromMm\":[0.0,18.0],\"toMm\":[22.3613808357771,14.057085232755291]}},{\"arc\":{\"ccw\":true,\"centerMm\":[25.66069621144878,32.768432539987224],\"endMm\":[43.0,25.0],\"radiusMm\":18.99999999999998,\"startMm\":[22.3613808357771,14.057085232755291]}},{\"line\":{\"fromMm\":[43.0,25.0],\"toMm\":[67.0,25.0]}},{\"line\":{\"fromMm\":[72.0,20.0],\"toMm\":[72.0,1.0]}},{\"line\":{\"fromMm\":[72.0,1.0],\"toMm\":[43.0,-33.0]}},{\"line\":{\"fromMm\":[43.0,-33.0],\"toMm\":[37.296980052734526,-33.0]}},{\"arc\":{\"ccw\":false,\"centerMm\":[59.20588235294099,-13.99999999999998],\"endMm\":[30.521177652752534,-18.264705882352946],\"radiusMm\":28.999999999999883,\"startMm\":[37.296980052734526,-33.0]}},{\"arc\":{\"ccw\":true,\"centerMm\":[25.575538911340765,-18.99999999999997],\"endMm\":[25.5755389113407,-14.0],\"radiusMm\":4.9999999999999325,\"startMm\":[30.521177652752534,-18.264705882352946]}},{\"line\":{\"fromMm\":[25.5755389113407,-14.0],\"toMm\":[-7.0,-14.0]}},{\"line\":{\"fromMm\":[-14.0,-7.0],\"toMm\":[-14.0,11.000000000000002]}},{\"line\":{\"fromMm\":[-7.0,18.0],\"toMm\":[0.0,18.0]}},{\"line\":{\"fromMm\":[-14.0,11.000000000000002],\"toMm\":[-7.0,18.0]}},{\"line\":{\"fromMm\":[-7.0,-14.0],\"toMm\":[-14.0,-7.0]}},{\"line\":{\"fromMm\":[67.0,25.0],\"toMm\":[72.0,20.0]}},{\"circle\":{\"centerMm\":[0.0,0.0],\"radiusMm\":7.0}}],\"mapped\":false,\"plane\":\"Front Plane\",\"planeFrames\":\"plane transforms (they match the measured Front/Top axes)\",\"proven\":{\"live\":false,\"measuredOn\":[],\"unmeasured\":[{\"variant\":\"sketch.line\",\"what\":\"lines of a closed contour (line, polyline, polygon, slot, rounded rect): ISketchManager::CreateLine\"},{\"variant\":\"sketch.arc\",\"what\":\"arcs of a closed contour (arc, arc3, tangentArc, slot, rounded rect): ISketchManager::CreateArc\"}],\"variants\":[\"sketch.plane.front\",\"sketch.circle\",\"sketch.multiProfile\",\"sketch.line\",\"sketch.arc\"],\"why\":\"not measured live: see `unmeasured` \u2014 verify this step's geometry with swx_inspect_bodies\"},\"resolvedPlane\":null,\"sketch\":\"Sketch13\",\"sketchNormal\":[0.0,0.0,1.0],\"sketchedOn\":\"Front Plane\",\"transformInverted\":false},\"step\":2},{\"op\":\"extrude\",\"result\":{\"depth2Mm\":null,\"depthMm\":44.0,\"dir\":{\"flippedToFollowTheReference\":false,\"reference\":null,\"sketchNormal\":[0.0,0.0,1.0],\"value\":false},\"direction\":\"one\",\"draftDeg\":null,\"draftInward\":null,\"endCondition\":0,\"feature\":\"Boss-Extrude10\",\"proven\":{\"live\":true,\"measuredOn\":[{\"bridge\":\"0.10.3\",\"by\":\"adom\",\"date\":\"2026-10-14\",\"edition\":\"connected\",\"major\":34,\"solidworks\":2026},{\"bridge\":\"0.10.9\",\"by\":\"community\",\"date\":\"2026-10-15\",\"edition\":\"desktop\",\"major\":29,\"solidworks\":2021}],\"variants\":[\"extrude.one\"]},\"reverse\":false,\"sketch\":\"Sketch13\",\"throughAll\":false,\"upToFace\":null},\"step\":3},{\"op\":\"set_material\",\"result\":{\"appearanceReapplied\":[],\"current\":{\"database\":\"SOLIDWORKS Materials\",\"name\":\"AISI 1020\"},\"database\":\"SOLIDWORKS Materials.sldmat\",\"densityKgM3\":7899.999999999999,\"densityRequested\":7900.0,\"material\":\"AISI 1020\",\"proven\":{\"live\":false,\"measuredOn\":[],\"unmeasured\":[{\"variant\":\"set_material.density\",\"what\":\"a density in kg/m\u00b3 (the document's own, or checked against the material's)\"}],\"variants\":[\"set_material\",\"set_material.density\"],\"why\":\"not measured live: see `unmeasured` \u2014 verify this step's geometry with swx_inspect_bodies\"}},\"step\":4},{\"op\":\"sketch\",\"result\":{\"createdPlane\":\"Plane4\",\"entities\":[{\"circle\":{\"centerMm\":[72.0,28.70187343596344],\"radiusMm\":41.0}}],\"mapped\":true,\"plane\":{\"offsetFrom\":{\"face\":{\"atPointMm\":[-10.0,0.0,0.0]}},\"offsetMm\":-12.0},\"planeFrames\":\"plane transforms (they match the measured Front/Top axes)\",\"proven\":{\"live\":false,\"measuredOn\":[],\"unmeasured\":[{\"variant\":\"sketch.faceOffset\",\"what\":\"a sketch on a plane offset from a picked face (along its outward normal)\"}],\"variants\":[\"sketch.faceOffset\",\"sketch.circle\"],\"why\":\"not measured live: see `unmeasured` \u2014 verify this step's geometry with swx_inspect_bodies\"},\"radiusMm\":41.0,\"resolvedPlane\":{\"faceNormal\":[-0.0,-0.0,-1.0],\"faceOffsetMm\":-12.0,\"fromFace\":true,\"offsetFrom\":\"Front Plane\",\"offsetMm\":12.0,\"pickedBy\":\"geometry\",\"plane\":\"Plane4\",\"verified\":true},\"sketch\":\"Sketch14\",\"sketchNormal\":[0.0,0.0,1.0],\"sketchedOn\":\"Plane4\",\"transformInverted\":false},\"step\":5},{\"op\":\"cut\",\"result\":{\"depth2Mm\":null,\"depthMm\":24.0,\"dir\":{\"flippedToFollowTheReference\":true,\"reference\":[-0.0,-0.0,-1.0],\"sketchNormal\":[0.0,0.0,1.0],\"value\":true},\"direction\":\"one\",\"draftDeg\":null,\"draftInward\":null,\"endCondition\":0,\"feature\":\"Cut-Extrude4\",\"proven\":{\"live\":true,\"measuredOn\":[{\"bridge\":\"0.10.3\",\"by\":\"adom\",\"date\":\"2026-10-14\",\"edition\":\"connected\",\"major\":34,\"solidworks\":2026},{\"bridge\":\"0.10.9\",\"by\":\"community\",\"date\":\"2026-10-15\",\"edition\":\"desktop\",\"major\":29,\"solidworks\":2021}],\"variants\":[\"cut.one.reversed\"]},\"reverse\":false,\"sketch\":\"Sketch14\",\"throughAll\":false,\"upToFace\":null},\"step\":6},{\"op\":\"sketch\",\"result\":{\"createdPlane\":null,\"entities\":[{\"rect\":{\"cornersMm\":[[-20.0,-40.0],[85.99999999999999,-13.999999999999998]]}}],\"heightMm\":26.0,\"mapped\":true,\"plane\":{\"face\":{\"atPointMm\":[-10.0,0.0,44.0]}},\"planeFrames\":\"plane transforms (they match the measured Front/Top axes)\",\"proven\":{\"live\":false,\"measuredOn\":[],\"unmeasured\":[{\"variant\":\"sketch.face.front.positive\",\"what\":\"a sketch on a face facing +Z\"}],\"variants\":[\"sketch.face.front.positive\",\"sketch.rect\",\"select.multiSelectTyped\"],\"why\":\"not measured live: see `unmeasured` \u2014 verify this step's geometry with swx_inspect_bodies\"},\"resolvedPlane\":{\"faceNormal\":[0.0,0.0,1.0],\"offsetFrom\":\"Front Plane\",\"offsetMm\":44.0,\"pickedBy\":\"geometry\",\"selectedVia\":\"MultiSelect2(typed array)\",\"viewDependent\":false},\"sketch\":\"Sketch15\",\"sketchNormal\":[0.0,0.0,1.0],\"sketchedOn\":\"the picked face\",\"transformInverted\":false,\"widthMm\":106.0},\"step\":7},{\"op\":\"cut\",\"result\":{\"depth2Mm\":null,\"depthMm\":19.0,\"dir\":{\"flippedToFollowTheReference\":false,\"reference\":[0.0,0.0,1.0],\"sketchNormal\":[0.0,0.0,1.0],\"value\":false},\"direction\":\"one\",\"draftDeg\":null,\"draftInward\":null,\"endCondition\":0,\"feature\":\"Cut-Extrude5\",\"proven\":{\"live\":true,\"measuredOn\":[{\"bridge\":\"0.10.3\",\"by\":\"adom\",\"date\":\"2026-10-14\",\"edition\":\"connected\",\"major\":34,\"solidworks\":2026},{\"bridge\":\"0.10.9\",\"by\":\"community\",\"date\":\"2026-10-15\",\"edition\":\"desktop\",\"major\":29,\"solidworks\":2021}],\"variants\":[\"cut.one\"]},\"reverse\":false,\"sketch\":\"Sketch15\",\"throughAll\":false,\"upToFace\":null},\"step\":8},{\"op\":\"sketch\",\"result\":{\"createdPlane\":null,\"entities\":[{\"rect\":{\"cornersMm\":[[-20.0,-40.0],[20.0,40.0]]}}],\"heightMm\":80.0,\"mapped\":true,\"plane\":{\"face\":{\"atPointMm\":[-10.0,0.0,44.0]}},\"planeFrames\":\"plane transforms (they match the measured Front/Top axes)\",\"proven\":{\"live\":false,\"measuredOn\":[],\"unmeasured\":[{\"variant\":\"sketch.face.front.positive\",\"what\":\"a sketch on a face facing +Z\"}],\"variants\":[\"sketch.face.front.positive\",\"sketch.rect\",\"select.multiSelectTyped\"],\"why\":\"not measured live: see `unmeasured` \u2014 verify this step's geometry with swx_inspect_bodies\"},\"resolvedPlane\":{\"faceNormal\":[0.0,0.0,1.0],\"offsetFrom\":\"Front Plane\",\"offsetMm\":44.0,\"pickedBy\":\"geometry\",\"selectedVia\":\"MultiSelect2(typed array)\",\"viewDependent\":false},\"sketch\":\"Sketch16\",\"sketchNormal\":[0.0,0.0,1.0],\"sketchedOn\":\"the picked face\",\"transformInverted\":false,\"widthMm\":40.0},\"step\":9},{\"op\":\"cut\",\"result\":{\"depth2Mm\":null,\"depthMm\":19.0,\"dir\":{\"flippedToFollowTheReference\":false,\"reference\":[0.0,0.0,1.0],\"sketchNormal\":[0.0,0.0,1.0],\"value\":false},\"direction\":\"one\",\"draftDeg\":null,\"draftInward\":null,\"endCondition\":0,\"feature\":\"Cut-Extrude6\",\"proven\":{\"live\":true,\"measuredOn\":[{\"bridge\":\"0.10.3\",\"by\":\"adom\",\"date\":\"2026-10-14\",\"edition\":\"connected\",\"major\":34,\"solidworks\":2026},{\"bridge\":\"0.10.9\",\"by\":\"community\",\"date\":\"2026-10-15\",\"edition\":\"desktop\",\"major\":29,\"solidworks\":2021}],\"variants\":[\"cut.one\"]},\"reverse\":false,\"sketch\":\"Sketch16\",\"throughAll\":false,\"upToFace\":null},\"step\":10},{\"op\":\"hole\",\"result\":{\"depthMm\":null,\"diameterMm\":11.0,\"face\":{\"atPointMm\":[58.0,11.0,44.0],\"heightMm\":44.0,\"normal\":[0.0,0.0,1.0],\"pickedBy\":\"geometry\",\"plane\":\"Front Plane\"},\"feature\":\"Cut-Extrude7\",\"features\":[\"Cut-Extrude7\"],\"proven\":{\"live\":false,\"measuredOn\":[],\"unmeasured\":[{\"variant\":\"hole.simple\",\"what\":\"a plain hole: a circle on the face's plane, cut blind or through all\"}],\"variants\":[\"hole.simple\"],\"why\":\"not measured live: see `unmeasured` \u2014 verify this step's geometry with swx_inspect_bodies\"},\"steps\":[{\"op\":\"sketch\",\"result\":{\"createdPlane\":\"Plane5\",\"entities\":[{\"circle\":{\"centerMm\":[58.0,11.0],\"radiusMm\":5.5}}],\"mapped\":true,\"plane\":{\"offsetFrom\":\"Front Plane\",\"offsetMm\":44.0},\"planeFrames\":\"plane transforms (they match the measured Front/Top axes)\",\"radiusMm\":5.5,\"resolvedPlane\":{\"offsetFrom\":\"Front Plane\",\"offsetMm\":44.0,\"plane\":\"Plane5\",\"verified\":true},\"sketch\":\"Sketch17\",\"sketchNormal\":[0.0,0.0,1.0],\"sketchedOn\":\"Plane5\",\"transformInverted\":false}},{\"op\":\"cut\",\"result\":{\"depth2Mm\":null,\"depthMm\":0.0,\"dir\":{\"flippedToFollowTheReference\":false,\"reference\":[0.0,0.0,1.0],\"sketchNormal\":[0.0,0.0,1.0],\"value\":false},\"direction\":\"one\",\"draftDeg\":null,\"draftInward\":null,\"endCondition\":1,\"feature\":\"Cut-Extrude7\",\"reverse\":false,\"sketch\":\"Sketch17\",\"throughAll\":true,\"upToFace\":null}}],\"throughAll\":true},\"step\":11}],\"success\":true,\"targetDocument\":\"Part1-1792105365003.SLDPRT\",\"timeoutSeconds\":420}", "progress": { "confidence": "estimate", "elapsedSec": 18.7, "estimatedSec": 30, "etaSec": 0, "percent": 100, "phase": "run_script", "startKind": "warm", "stepLabel": "Running 11 modeling step(s)" }, "readiness": { "basedOn": [ "alreadyReadyThisSession" ], "evaluatedAt": "gate", "readsAllowed": true, "ready": true, "running": true, "state": "ready", "why": null }, "schemaVersion": 1, "solidworksRevision": "34.3.0", "status": "ok", "statusVerb": "swx_status", "stepCount": 11, "steps": [ { "op": "clear_part", "result": { "bodiesLeft": 0, "cleared": "Part1-1792105365003.SLDPRT", "deleted": [ "Sketch12", "Boss-Extrude9" ], "featuresDeleted": 2, "passes": 1, "proven": { "live": true, "measuredOn": [ { "bridge": "0.10.6", "by": "adom", "date": "2026-10-14", "edition": "connected", "major": 34, "solidworks": 2026 }, { "bridge": "0.10.9", "by": "community", "date": "2026-10-15", "edition": "desktop", "major": 29, "solidworks": 2021 } ], "variants": [ "clear_part" ] }, "route": "DeleteSelection2(swDelete_Children | swDelete_Absorbed), repeated until the tree is empty" }, "step": 1 }, { "op": "sketch", "result": { "createdPlane": null, "entities": [ { "line": { "fromMm": [ 0.0, 18.0 ], "toMm": [ 22.3613808357771, 14.057085232755291 ] } }, { "arc": { "ccw": true, "centerMm": [ 25.66069621144878, 32.768432539987224 ], "endMm": [ 43.0, 25.0 ], "radiusMm": 18.99999999999998, "startMm": [ 22.3613808357771, 14.057085232755291 ] } }, { "line": { "fromMm": [ 43.0, 25.0 ], "toMm": [ 67.0, 25.0 ] } }, { "line": { "fromMm": [ 72.0, 20.0 ], "toMm": [ 72.0, 1.0 ] } }, { "line": { "fromMm": [ 72.0, 1.0 ], "toMm": [ 43.0, -33.0 ] } }, { "line": { "fromMm": [ 43.0, -33.0 ], "toMm": [ 37.296980052734526, -33.0 ] } }, { "arc": { "ccw": false, "centerMm": [ 59.20588235294099, -13.99999999999998 ], "endMm": [ 30.521177652752534, -18.264705882352946 ], "radiusMm": 28.999999999999883, "startMm": [ 37.296980052734526, -33.0 ] } }, { "arc": { "ccw": true, "centerMm": [ 25.575538911340765, -18.99999999999997 ], "endMm": [ 25.5755389113407, -14.0 ], "radiusMm": 4.9999999999999325, "startMm": [ 30.521177652752534, -18.264705882352946 ] } }, { "line": { "fromMm": [ 25.5755389113407, -14.0 ], "toMm": [ -7.0, -14.0 ] } }, { "line": { "fromMm": [ -14.0, -7.0 ], "toMm": [ -14.0, 11.000000000000002 ] } }, { "line": { "fromMm": [ -7.0, 18.0 ], "toMm": [ 0.0, 18.0 ] } }, { "line": { "fromMm": [ -14.0, 11.000000000000002 ], "toMm": [ -7.0, 18.0 ] } }, { "line": { "fromMm": [ -7.0, -14.0 ], "toMm": [ -14.0, -7.0 ] } }, { "line": { "fromMm": [ 67.0, 25.0 ], "toMm": [ 72.0, 20.0 ] } }, { "circle": { "centerMm": [ 0.0, 0.0 ], "radiusMm": 7.0 } } ], "mapped": false, "plane": "Front Plane", "planeFrames": "plane transforms (they match the measured Front/Top axes)", "proven": { "live": false, "measuredOn": [], "unmeasured": [ { "variant": "sketch.line", "what": "lines of a closed contour (line, polyline, polygon, slot, rounded rect): ISketchManager::CreateLine" }, { "variant": "sketch.arc", "what": "arcs of a closed contour (arc, arc3, tangentArc, slot, rounded rect): ISketchManager::CreateArc" } ], "variants": [ "sketch.plane.front", "sketch.circle", "sketch.multiProfile", "sketch.line", "sketch.arc" ], "why": "not measured live: see `unmeasured` \u2014 verify this step's geometry with swx_inspect_bodies" }, "resolvedPlane": null, "sketch": "Sketch13", "sketchNormal": [ 0.0, 0.0, 1.0 ], "sketchedOn": "Front Plane", "transformInverted": false }, "step": 2 }, { "op": "extrude", "result": { "depth2Mm": null, "depthMm": 44.0, "dir": { "flippedToFollowTheReference": false, "reference": null, "sketchNormal": [ 0.0, 0.0, 1.0 ], "value": false }, "direction": "one", "draftDeg": null, "draftInward": null, "endCondition": 0, "feature": "Boss-Extrude10", "proven": { "live": true, "measuredOn": [ { "bridge": "0.10.3", "by": "adom", "date": "2026-10-14", "edition": "connected", "major": 34, "solidworks": 2026 }, { "bridge": "0.10.9", "by": "community", "date": "2026-10-15", "edition": "desktop", "major": 29, "solidworks": 2021 } ], "variants": [ "extrude.one" ] }, "reverse": false, "sketch": "Sketch13", "throughAll": false, "upToFace": null }, "step": 3 }, { "op": "set_material", "result": { "appearanceReapplied": [], "current": { "database": "SOLIDWORKS Materials", "name": "AISI 1020" }, "database": "SOLIDWORKS Materials.sldmat", "densityKgM3": 7899.999999999999, "densityRequested": 7900.0, "material": "AISI 1020", "proven": { "live": false, "measuredOn": [], "unmeasured": [ { "variant": "set_material.density", "what": "a density in kg/m\u00b3 (the document's own, or checked against the material's)" } ], "variants": [ "set_material", "set_material.density" ], "why": "not measured live: see `unmeasured` \u2014 verify this step's geometry with swx_inspect_bodies" } }, "step": 4 }, { "op": "sketch", "result": { "createdPlane": "Plane4", "entities": [ { "circle": { "centerMm": [ 72.0, 28.70187343596344 ], "radiusMm": 41.0 } } ], "mapped": true, "plane": { "offsetFrom": { "face": { "atPointMm": [ -10.0, 0.0, 0.0 ] } }, "offsetMm": -12.0 }, "planeFrames": "plane transforms (they match the measured Front/Top axes)", "proven": { "live": false, "measuredOn": [], "unmeasured": [ { "variant": "sketch.faceOffset", "what": "a sketch on a plane offset from a picked face (along its outward normal)" } ], "variants": [ "sketch.faceOffset", "sketch.circle" ], "why": "not measured live: see `unmeasured` \u2014 verify this step's geometry with swx_inspect_bodies" }, "radiusMm": 41.0, "resolvedPlane": { "faceNormal": [ -0.0, -0.0, -1.0 ], "faceOffsetMm": -12.0, "fromFace": true, "offsetFrom": "Front Plane", "offsetMm": 12.0, "pickedBy": "geometry", "plane": "Plane4", "verified": true }, "sketch": "Sketch14", "sketchNormal": [ 0.0, 0.0, 1.0 ], "sketchedOn": "Plane4", "transformInverted": false }, "step": 5 }, { "op": "cut", "result": { "depth2Mm": null, "depthMm": 24.0, "dir": { "flippedToFollowTheReference": true, "reference": [ -0.0, -0.0, -1.0 ], "sketchNormal": [ 0.0, 0.0, 1.0 ], "value": true }, "direction": "one", "draftDeg": null, "draftInward": null, "endCondition": 0, "feature": "Cut-Extrude4", "proven": { "live": true, "measuredOn": [ { "bridge": "0.10.3", "by": "adom", "date": "2026-10-14", "edition": "connected", "major": 34, "solidworks": 2026 }, { "bridge": "0.10.9", "by": "community", "date": "2026-10-15", "edition": "desktop", "major": 29, "solidworks": 2021 } ], "variants": [ "cut.one.reversed" ] }, "reverse": false, "sketch": "Sketch14", "throughAll": false, "upToFace": null }, "step": 6 }, { "op": "sketch", "result": { "createdPlane": null, "entities": [ { "rect": { "cornersMm": [ [ -20.0, -40.0 ], [ 85.99999999999999, -13.999999999999998 ] ] } } ], "heightMm": 26.0, "mapped": true, "plane": { "face": { "atPointMm": [ -10.0, 0.0, 44.0 ] } }, "planeFrames": "plane transforms (they match the measured Front/Top axes)", "proven": { "live": false, "measuredOn": [], "unmeasured": [ { "variant": "sketch.face.front.positive", "what": "a sketch on a face facing +Z" } ], "variants": [ "sketch.face.front.positive", "sketch.rect", "select.multiSelectTyped" ], "why": "not measured live: see `unmeasured` \u2014 verify this step's geometry with swx_inspect_bodies" }, "resolvedPlane": { "faceNormal": [ 0.0, 0.0, 1.0 ], "offsetFrom": "Front Plane", "offsetMm": 44.0, "pickedBy": "geometry", "selectedVia": "MultiSelect2(typed array)", "viewDependent": false }, "sketch": "Sketch15", "sketchNormal": [ 0.0, 0.0, 1.0 ], "sketchedOn": "the picked face", "transformInverted": false, "widthMm": 106.0 }, "step": 7 }, { "op": "cut", "result": { "depth2Mm": null, "depthMm": 19.0, "dir": { "flippedToFollowTheReference": false, "reference": [ 0.0, 0.0, 1.0 ], "sketchNormal": [ 0.0, 0.0, 1.0 ], "value": false }, "direction": "one", "draftDeg": null, "draftInward": null, "endCondition": 0, "feature": "Cut-Extrude5", "proven": { "live": true, "measuredOn": [ { "bridge": "0.10.3", "by": "adom", "date": "2026-10-14", "edition": "connected", "major": 34, "solidworks": 2026 }, { "bridge": "0.10.9", "by": "community", "date": "2026-10-15", "edition": "desktop", "major": 29, "solidworks": 2021 } ], "variants": [ "cut.one" ] }, "reverse": false, "sketch": "Sketch15", "throughAll": false, "upToFace": null }, "step": 8 }, { "op": "sketch", "result": { "createdPlane": null, "entities": [ { "rect": { "cornersMm": [ [ -20.0, -40.0 ], [ 20.0, 40.0 ] ] } } ], "heightMm": 80.0, "mapped": true, "plane": { "face": { "atPointMm": [ -10.0, 0.0, 44.0 ] } }, "planeFrames": "plane transforms (they match the measured Front/Top axes)", "proven": { "live": false, "measuredOn": [], "unmeasured": [ { "variant": "sketch.face.front.positive", "what": "a sketch on a face facing +Z" } ], "variants": [ "sketch.face.front.positive", "sketch.rect", "select.multiSelectTyped" ], "why": "not measured live: see `unmeasured` \u2014 verify this step's geometry with swx_inspect_bodies" }, "resolvedPlane": { "faceNormal": [ 0.0, 0.0, 1.0 ], "offsetFrom": "Front Plane", "offsetMm": 44.0, "pickedBy": "geometry", "selectedVia": "MultiSelect2(typed array)", "viewDependent": false }, "sketch": "Sketch16", "sketchNormal": [ 0.0, 0.0, 1.0 ], "sketchedOn": "the picked face", "transformInverted": false, "widthMm": 40.0 }, "step": 9 }, { "op": "cut", "result": { "depth2Mm": null, "depthMm": 19.0, "dir": { "flippedToFollowTheReference": false, "reference": [ 0.0, 0.0, 1.0 ], "sketchNormal": [ 0.0, 0.0, 1.0 ], "value": false }, "direction": "one", "draftDeg": null, "draftInward": null, "endCondition": 0, "feature": "Cut-Extrude6", "proven": { "live": true, "measuredOn": [ { "bridge": "0.10.3", "by": "adom", "date": "2026-10-14", "edition": "connected", "major": 34, "solidworks": 2026 }, { "bridge": "0.10.9", "by": "community", "date": "2026-10-15", "edition": "desktop", "major": 29, "solidworks": 2021 } ], "variants": [ "cut.one" ] }, "reverse": false, "sketch": "Sketch16", "throughAll": false, "upToFace": null }, "step": 10 }, { "op": "hole", "result": { "depthMm": null, "diameterMm": 11.0, "face": { "atPointMm": [ 58.0, 11.0, 44.0 ], "heightMm": 44.0, "normal": [ 0.0, 0.0, 1.0 ], "pickedBy": "geometry", "plane": "Front Plane" }, "feature": "Cut-Extrude7", "features": [ "Cut-Extrude7" ], "proven": { "live": false, "measuredOn": [], "unmeasured": [ { "variant": "hole.simple", "what": "a plain hole: a circle on the face's plane, cut blind or through all" } ], "variants": [ "hole.simple" ], "why": "not measured live: see `unmeasured` \u2014 verify this step's geometry with swx_inspect_bodies" }, "steps": [ { "op": "sketch", "result": { "createdPlane": "Plane5", "entities": [ { "circle": { "centerMm": [ 58.0, 11.0 ], "radiusMm": 5.5 } } ], "mapped": true, "plane": { "offsetFrom": "Front Plane", "offsetMm": 44.0 }, "planeFrames": "plane transforms (they match the measured Front/Top axes)", "radiusMm": 5.5, "resolvedPlane": { "offsetFrom": "Front Plane", "offsetMm": 44.0, "plane": "Plane5", "verified": true }, "sketch": "Sketch17", "sketchNormal": [ 0.0, 0.0, 1.0 ], "sketchedOn": "Plane5", "transformInverted": false } }, { "op": "cut", "result": { "depth2Mm": null, "depthMm": 0.0, "dir": { "flippedToFollowTheReference": false, "reference": [ 0.0, 0.0, 1.0 ], "sketchNormal": [ 0.0, 0.0, 1.0 ], "value": false }, "direction": "one", "draftDeg": null, "draftInward": null, "endCondition": 1, "feature": "Cut-Extrude7", "reverse": false, "sketch": "Sketch17", "throughAll": true, "upToFace": null } } ], "throughAll": true }, "step": 11 } ], "success": true, "targetDocument": "Part1-1792105365003.SLDPRT", "timeoutSeconds": 420 }, "massProperties": { "_hint": "SI units: kg, m^3, m^2, m. Mass is only as good as the material assignment \u2014 a 0 or default density means no material is set on the model, so report the density alongside the mass.", "_timeoutHint": "ab waits up to 120s for this verb before the request times out. If it's a long operation (cloud open / download / export), DON'T treat a timeout as failure \u2014 the work usually keeps running on the bridge. Poll `swx_status` until it reports done.", "boundingBox": [ -0.014, -0.033, 0.0, 0.07200000000000001, 0.025, 0.044 ], "centerOfMass": [ 0.03174279639698831, -0.0008683174573996883, 0.017834837095750275 ], "centerOfMassMm": [ 31.742796, -0.868317, 17.834837 ], "density": 7900.0, "densityKgM3": 7900.0, "doc": { "config": "Default", "dirty": true, "path": "C:/Users/drew/AppData/Local/adom-solidworks-bridge/exports/scratch/Part1-1792105365003.SLDPRT", "title": "Part1-1792105365003.SLDPRT", "type": "part" }, "durationMs": 2150, "error": "", "massG": 628.1833833399141, "massKg": 0.6281833833399142, "materialName": "AISI 1020", "output": "{\"_hint\":\"SI units: kg, m^3, m^2, m. Mass is only as good as the material assignment \u2014 a 0 or default density means no material is set on the model, so report the density alongside the mass.\",\"_timeoutHint\":\"ab waits up to 120s for this verb before the request times out. If it's a long operation (cloud open / download / export), DON'T treat a timeout as failure \u2014 the work usually keeps running on the bridge. Poll `swx_status` until it reports done.\",\"boundingBox\":[-0.014,-0.033,0.0,0.07200000000000001,0.025,0.044],\"centerOfMass\":[0.03174279639698831,-0.0008683174573996883,0.017834837095750275],\"centerOfMassMm\":[31.742796,-0.868317,17.834837],\"density\":7900.0,\"densityKgM3\":7900.0,\"doc\":{\"config\":\"Default\",\"dirty\":true,\"path\":\"C:\\\\Users\\\\drew\\\\AppData\\\\Local\\\\adom-solidworks-bridge\\\\exports\\\\scratch\\\\Part1-1792105365003.SLDPRT\",\"title\":\"Part1-1792105365003.SLDPRT\",\"type\":\"part\"},\"massG\":628.1833833399141,\"massKg\":0.6281833833399142,\"materialName\":\"AISI 1020\",\"readiness\":{\"basedOn\":[\"alreadyReadyThisSession\"],\"evaluatedAt\":\"gate\",\"readsAllowed\":true,\"ready\":true,\"running\":true,\"state\":\"ready\",\"why\":null},\"statusVerb\":\"swx_status\",\"success\":true,\"surfaceAreaM2\":0.01771252880409412,\"surfaceAreaMm2\":17712.52880409412,\"timeoutSeconds\":120,\"volumeM3\":0.00007951688396707775,\"volumeMm3\":79516.88396707775}", "readiness": { "basedOn": [ "alreadyReadyThisSession" ], "evaluatedAt": "gate", "readsAllowed": true, "ready": true, "running": true, "state": "ready", "why": null }, "schemaVersion": 1, "status": "ok", "statusVerb": "swx_status", "success": true, "surfaceAreaM2": 0.01771252880409412, "surfaceAreaMm2": 17712.52880409412, "timeoutSeconds": 120, "volumeM3": 7.951688396707775e-05, "volumeMm3": 79516.88396707775 }, "pass": true, "checks": [ { "quantity": "massG", "expected": 628.18, "measured": 628.1833833399141, "offPct": 0.0005385940198978062, "pass": true } ], "fails": [], "seconds": 23.0 }, { "id": "cswa-08-tool-block-step4", "title": "Official Tool Block, Step 4 (Q6): a pocket 1 mm inside the front face's outline", "official": true, "source": "https://www.solidworks.com/sites/default/files/2017-12/CSWASampleExam.pdf (Dassault CSWA Sample Exam, 2017 edition; archive http://web.archive.org/web/20251230104817/https://www.solidworks.com/sites/default/files/2017-12/CSWASampleExam.pdf)", "expected": { "massG": 432.58, "tolerancePct": 1.0 }, "material": { "name": "AISI 1020", "densityKgM3": 7900 }, "skipped": "needs ops the bridge does not have yet: offsetEntities" } ] }