component
SN75ALS191P
Public Made by Adomby adom
Texas Instruments RS-485 / RS-422 ICs, PDIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+45@@ -0,0 +1,45 @@+# SN75ALS191P++**Texas Instruments** · RS-485 / RS-422 ICs · PDIP-8++SN75ALS191P from Texas Instruments, in a PDIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VCC | power_in | 5 V power supply positive terminal; recommended supply is 4.75 V to 5.25 V (5 V nominal) with an absolute maximum of 7 V. |+| 2 | 1A | input | Single-ended data input for channel 1, TTL and CMOS compatible, with VIH of at least 2 V and VIL of at most 0.8 V. |+| 3 | 2A | input | Single-ended data input for channel 2, TTL and CMOS compatible, with VIH of at least 2 V and VIL of at most 0.8 V. |+| 4 | GND | power_in | Device ground terminal; all voltages are referenced to network ground. |+| 5 | 2Z | output | Inverting differential driver output for channel 2; it is low when input 2A is high and high when 2A is low, per the function table. |+| 6 | 2Y | output | Non-inverting differential driver output for channel 2; it follows input 2A (high when 2A is high, low when 2A is low) per the function table. |+| 7 | 1Z | output | Inverting differential driver output for channel 1; it is low when input 1A is high and high when 1A is low, per the function table. |+| 8 | 1Y | output | Non-inverting differential driver output for channel 1; it follows input 1A (high when 1A is high, low when 1A is low) per the function table. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | PDIP-8 |+| Category | Interface |+| Pins | 8 |++## CAD (KiCad official)++- Symbol: `SN75ALS191P`+- Footprint: `Package_DIP:DIP-8_W7.62mm`+- 3D model: PDIP-8 (KiCad packages3D, STEP)+- 3D model files: `sn75als191p-etched.step` / `sn75als191p-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sn75als191p.step` / `sn75als191p.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/sn75als191) (20 pp, sha256 `5f3d52313d5ecc3b`, retrieved 2026-10-07, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/sn75als191p-datasheet.pdf)
page.jsonadded+198@@ -0,0 +1,198 @@+{+ "slug": "sn75als191p",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments RS-485 / RS-422 ICs, PDIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "interface",+ "sn75als191p",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "sn75als191p.kicad_sym",+ "sn75als191p.kicad_mod",+ "sn75als191p.glb",+ "sn75als191p.step",+ "sn75als191p.lbr",+ "docs/hero.png",+ "docs/sn75als191p-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "sn75als191p-hero.glb",+ "sn75als191p-hero.overlay.json"+ ],+ "component": {+ "mpn": "SN75ALS191P",+ "manufacturer": "Texas Instruments",+ "package": "PDIP-8",+ "pin_count": 8,+ "category": "Interface",+ "subcategory": "RS-485 / RS-422 ICs",+ "datasheet": "https://www.ti.com/cn/lit/gpn/sn75als191",+ "parts": {+ "symbol": "sn75als191p.kicad_sym",+ "footprint": "sn75als191p.kicad_mod",+ "model_3d": "sn75als191p-hero.glb",+ "model_3d_plain": "sn75als191p.glb",+ "model_3d_step": "sn75als191p-etched.step",+ "model_3d_step_plain": "sn75als191p.step",+ "lbr": "sn75als191p.lbr"+ },+ "distributor_links": {+ "lcsc": "C1544624",+ "digikey": "296-9965-5-ND",+ "mouser": "595-SN75ALS191P"+ },+ "distributor_check": {+ "checked_at": "2026-10-07T22:02:28Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-9965-5-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-SN75ALS191P",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "VCC",+ "type": "power_in",+ "description": "5 V power supply positive terminal; recommended supply is 4.75 V to 5.25 V (5 V nominal) with an absolute maximum of 7 V."+ },+ {+ "number": "2",+ "name": "1A",+ "type": "input",+ "description": "Single-ended data input for channel 1, TTL and CMOS compatible, with VIH of at least 2 V and VIL of at most 0.8 V."+ },+ {+ "number": "3",+ "name": "2A",+ "type": "input",+ "description": "Single-ended data input for channel 2, TTL and CMOS compatible, with VIH of at least 2 V and VIL of at most 0.8 V."+ },+ {+ "number": "4",+ "name": "GND",+ "type": "power_in",+ "description": "Device ground terminal; all voltages are referenced to network ground."+ },+ {+ "number": "5",+ "name": "2Z",+ "type": "output",+ "description": "Inverting differential driver output for channel 2; it is low when input 2A is high and high when 2A is low, per the function table."+ },+ {+ "number": "6",+ "name": "2Y",+ "type": "output",+ "description": "Non-inverting differential driver output for channel 2; it follows input 2A (high when 2A is high, low when 2A is low) per the function table."+ },+ {+ "number": "7",+ "name": "1Z",+ "type": "output",+ "description": "Inverting differential driver output for channel 1; it is low when input 1A is high and high when 1A is low, per the function table."+ },+ {+ "number": "8",+ "name": "1Y",+ "type": "output",+ "description": "Non-inverting differential driver output for channel 1; it follows input 1A (high when 1A is high, low when 1A is low) per the function table."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [],+ "pages_sent": 20,+ "cost_usd": 0.059,+ "at": "2026-10-07T22:02:11"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/sn75als191",+ "pages": 20,+ "sha256": "5f3d52313d5ecc3b",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 8,+ "described": 8,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "sn75als191p.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "body on z = 0, through-hole leads below",+ "extents_mm": [+ 7.874,+ 9.27,+ 6.98+ ],+ "zmin_mm": -3.3,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "4a377a56a8d9e9c0b86c095ef9ecc1869ac19e7f5069a3247b294250bf4f235d",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "sn75als191p-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "body on z = 0, through-hole leads below",+ "extents_mm": [+ 7.874,+ 9.27,+ 6.98+ ],+ "zmin_mm": -3.3,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "73b74cef8d8e82f4b3d57b36eb98e50ba868eabfd551febab00f93ca8c6b6743",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}