← Commit history

Initial commit: component/sn74lv4046adr

Ray ·12fdcc4494 ·
2 files changed +241
README.mdadded+52
@@ -0,0 +1,52 @@+# SN74LV4046ADR++**Texas Instruments** · Clock Generators, PLLs, Frequency Synthesizers · SOIC-16++SN74LV4046ADR from Texas Instruments, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | PCPOUT | output | Phase comparator pulse output |+| 2 | PC1OUT | output | Phase comparator 1 output from exclusive OR phase detector |+| 3 | COMPIN | input | Comparator input for phase comparison |+| 4 | VCOOUT | output | VCO oscillator output with 50% duty cycle |+| 5 | INH | input | Inhibit input; LOW enables VCO and demodulator, HIGH disables for standby power reduction |+| 6 | C1A | passive | Capacitor C1 connection A for VCO timing; requires external capacitor ≥40 pF between C1A and C1B |+| 7 | C1B | passive | Capacitor C1 connection B for VCO timing; requires external capacitor ≥40 pF between C1A and C1B |+| 8 | GND | power_in | Ground (0 V) |+| 9 | VCOIN | input | VCO input for phase error signal from lowpass filter; operating voltage range 1.1 V to 3.2 V at 4.5 V to 5.5 V supply |+| 10 | DEMOUT | output | Demodulator output equal to VCO input voltage; connect load resistor RS (50 kΩ to 300 kΩ) to GND if used |+| 11 | R1 | passive | Resistor R1 connection for VCO frequency tuning; connect 3 kΩ to 50 kΩ resistor to GND |+| 12 | R2 | passive | Resistor R2 connection for VCO frequency offset; connect 3 kΩ to 50 kΩ resistor to GND, parallel combination with R1 must exceed 2.7 kΩ |+| 13 | PC2OUT | tri_state | Phase comparator 2 output from edge-triggered flip-flop detector with 3-state output control |+| 14 | SIGIN | input | Signal input for phase comparison; supports direct or AC-coupled (series capacitor) signal inputs |+| 15 | PC3OUT | output | Phase comparator 3 output from edge-triggered RS flip-flop phase detector |+| 16 | VCC | power_in | Positive supply voltage; recommended operating range 3 V to 5.5 V |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOIC-16 |+| Category | Clock/Timing |+| Pins | 16 |++## CAD (KiCad official)++- Symbol: `SN74LV4046ADR`+- Footprint: `Package_SO:SOIC-16_3.9x9.9mm_P1.27mm`+- 3D model: SOIC-16 (KiCad packages3D, STEP)+- 3D model files: `sn74lv4046adr-etched.step` / `sn74lv4046adr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sn74lv4046adr.step` / `sn74lv4046adr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/sn74lv4046a.pdf) (29 pp, sha256 `59629b0484cc44bb`, retrieved 2026-09-18, tier: manufacturer)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/sn74lv4046adr-datasheet.pdf)
page.jsonadded+189
@@ -0,0 +1,189 @@+{+  "slug": "sn74lv4046adr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Clock Generators, PLLs, Frequency Synthesizers, SOIC-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "clock-timing",+    "sn74lv4046adr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "sn74lv4046adr.kicad_sym",+    "sn74lv4046adr.kicad_mod",+    "sn74lv4046adr.glb",+    "sn74lv4046adr.step",+    "sn74lv4046adr.lbr",+    "docs/hero.png",+    "docs/sn74lv4046adr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "SN74LV4046ADR",+    "manufacturer": "Texas Instruments",+    "package": "SOIC-16",+    "pin_count": 16,+    "category": "Clock/Timing",+    "subcategory": "Clock Generators, PLLs, Frequency Synthesizers",+    "datasheet": "https://www.ti.com/lit/ds/symlink/sn74lv4046a.pdf",+    "parts": {+      "symbol": "sn74lv4046adr.kicad_sym",+      "footprint": "sn74lv4046adr.kicad_mod",+      "model_3d": "sn74lv4046adr-etched.glb",+      "model_3d_plain": "sn74lv4046adr.glb",+      "model_3d_step": "sn74lv4046adr-etched.step",+      "model_3d_step_plain": "sn74lv4046adr.step",+      "lbr": "sn74lv4046adr.lbr"+    },+    "distributor_links": {+      "lcsc": "C1535635"+    },+    "pins": [+      {+        "number": "1",+        "name": "PCPOUT",+        "type": "output",+        "description": "Phase comparator pulse output"+      },+      {+        "number": "2",+        "name": "PC1OUT",+        "type": "output",+        "description": "Phase comparator 1 output from exclusive OR phase detector"+      },+      {+        "number": "3",+        "name": "COMPIN",+        "type": "input",+        "description": "Comparator input for phase comparison"+      },+      {+        "number": "4",+        "name": "VCOOUT",+        "type": "output",+        "description": "VCO oscillator output with 50% duty cycle"+      },+      {+        "number": "5",+        "name": "INH",+        "type": "input",+        "description": "Inhibit input; LOW enables VCO and demodulator, HIGH disables for standby power reduction"+      },+      {+        "number": "6",+        "name": "C1A",+        "type": "passive",+        "description": "Capacitor C1 connection A for VCO timing; requires external capacitor ≥40 pF between C1A and C1B"+      },+      {+        "number": "7",+        "name": "C1B",+        "type": "passive",+        "description": "Capacitor C1 connection B for VCO timing; requires external capacitor ≥40 pF between C1A and C1B"+      },+      {+        "number": "8",+        "name": "GND",+        "type": "power_in",+        "description": "Ground (0 V)"+      },+      {+        "number": "9",+        "name": "VCOIN",+        "type": "input",+        "description": "VCO input for phase error signal from lowpass filter; operating voltage range 1.1 V to 3.2 V at 4.5 V to 5.5 V supply"+      },+      {+        "number": "10",+        "name": "DEMOUT",+        "type": "output",+        "description": "Demodulator output equal to VCO input voltage; connect load resistor RS (50 kΩ to 300 kΩ) to GND if used"+      },+      {+        "number": "11",+        "name": "R1",+        "type": "passive",+        "description": "Resistor R1 connection for VCO frequency tuning; connect 3 kΩ to 50 kΩ resistor to GND"+      },+      {+        "number": "12",+        "name": "R2",+        "type": "passive",+        "description": "Resistor R2 connection for VCO frequency offset; connect 3 kΩ to 50 kΩ resistor to GND, parallel combination with R1 must exceed 2.7 kΩ"+      },+      {+        "number": "13",+        "name": "PC2OUT",+        "type": "tri_state",+        "description": "Phase comparator 2 output from edge-triggered flip-flop detector with 3-state output control"+      },+      {+        "number": "14",+        "name": "SIGIN",+        "type": "input",+        "description": "Signal input for phase comparison; supports direct or AC-coupled (series capacitor) signal inputs"+      },+      {+        "number": "15",+        "name": "PC3OUT",+        "type": "output",+        "description": "Phase comparator 3 output from edge-triggered RS flip-flop phase detector"+      },+      {+        "number": "16",+        "name": "VCC",+        "type": "power_in",+        "description": "Positive supply voltage; recommended operating range 3 V to 5.5 V"+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 29,+        "cost_usd": 0.2657,+        "at": "2026-09-18T00:06:06"+      },+      "datasheet": {+        "url": "https://www.ti.com/lit/ds/symlink/sn74lv4046a.pdf",+        "pages": 29,+        "sha256": "59629b0484cc44bb",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 16,+        "described": 16,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file