component
SN74LS365ADR
Public Made by Adomby adom
Texas Instruments Buffers, Drivers, Receivers, Transceivers, SOIC-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+52@@ -0,0 +1,52 @@+# SN74LS365ADR++**Texas Instruments** · Buffers, Drivers, Receivers, Transceivers · SOIC-16++SN74LS365ADR from Texas Instruments, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | G1 | input | Active-low output-enable input G1, which is gated with G2 to enable the 3-state outputs of the hex bus driver. |+| 2 | A1 | input | Data input A1 of driver 1, non-inverting to Y1. |+| 3 | Y1 | tri_state | 3-state non-inverting output of driver 1, which follows A1 when enabled. |+| 4 | A2 | input | Data input A2 of driver 2, non-inverting to Y2. |+| 5 | Y2 | tri_state | 3-state non-inverting output of driver 2, which follows A2 when enabled. |+| 6 | A3 | input | Data input A3 of driver 3, non-inverting to Y3. |+| 7 | Y3 | tri_state | 3-state non-inverting output of driver 3, which follows A3 when enabled. |+| 8 | GND | power_in | Ground terminal; all voltage values are with respect to this network ground terminal. |+| 9 | Y4 | tri_state | 3-state non-inverting output of driver 4, which follows A4 when enabled. |+| 10 | A4 | input | Data input A4 of driver 4, non-inverting to Y4. |+| 11 | Y5 | tri_state | 3-state non-inverting output of driver 5, which follows A5 when enabled. |+| 12 | A5 | input | Data input A5 of driver 5, non-inverting to Y5. |+| 13 | Y6 | tri_state | 3-state non-inverting output of driver 6, which follows A6 when enabled. |+| 14 | A6 | input | Data input A6 of driver 6, non-inverting to Y6. |+| 15 | G2 | input | Active-low output-enable input G2, which is gated with G1 to enable the 3-state outputs of the hex bus driver. |+| 16 | VCC | power_in | Supply voltage pin; absolute maximum rating is 7 V with respect to ground. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOIC-16 |+| Category | Logic |+| Pins | 16 |++## CAD (KiCad official)++- Symbol: `SN74LS365ADR`+- Footprint: `Package_SO:SOIC-16_3.9x9.9mm_P1.27mm`+- 3D model: SOIC-16 (KiCad packages3D, STEP)+- 3D model files: `sn74ls365adr-etched.step` / `sn74ls365adr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sn74ls365adr.step` / `sn74ls365adr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/sn74ls365a.pdf) (28 pp, sha256 `f3660b50e9237779`, retrieved 2026-10-07, tier: manufacturer)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/sn74ls365adr-datasheet.pdf)
page.jsonadded+249@@ -0,0 +1,249 @@+{+ "slug": "sn74ls365adr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Buffers, Drivers, Receivers, Transceivers, SOIC-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "logic",+ "sn74ls365adr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "sn74ls365adr.kicad_sym",+ "sn74ls365adr.kicad_mod",+ "sn74ls365adr.glb",+ "sn74ls365adr.step",+ "sn74ls365adr.lbr",+ "docs/hero.png",+ "docs/sn74ls365adr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "sn74ls365adr-hero.glb",+ "sn74ls365adr-hero.overlay.json"+ ],+ "component": {+ "mpn": "SN74LS365ADR",+ "manufacturer": "Texas Instruments",+ "package": "SOIC-16",+ "pin_count": 16,+ "category": "Logic",+ "subcategory": "Buffers, Drivers, Receivers, Transceivers",+ "datasheet": "https://www.ti.com/lit/ds/symlink/sn74ls365a.pdf",+ "parts": {+ "symbol": "sn74ls365adr.kicad_sym",+ "footprint": "sn74ls365adr.kicad_mod",+ "model_3d": "sn74ls365adr-hero.glb",+ "model_3d_plain": "sn74ls365adr.glb",+ "model_3d_step": "sn74ls365adr-etched.step",+ "model_3d_step_plain": "sn74ls365adr.step",+ "lbr": "sn74ls365adr.lbr"+ },+ "distributor_links": {+ "lcsc": "C2675902",+ "digikey": "296-43284-2-ND",+ "mouser": "595-SN74LS365ADR"+ },+ "distributor_check": {+ "checked_at": "2026-10-07T22:25:44Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-43284-2-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-SN74LS365ADR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "G1",+ "type": "input",+ "description": "Active-low output-enable input G1, which is gated with G2 to enable the 3-state outputs of the hex bus driver."+ },+ {+ "number": "2",+ "name": "A1",+ "type": "input",+ "description": "Data input A1 of driver 1, non-inverting to Y1."+ },+ {+ "number": "3",+ "name": "Y1",+ "type": "tri_state",+ "description": "3-state non-inverting output of driver 1, which follows A1 when enabled."+ },+ {+ "number": "4",+ "name": "A2",+ "type": "input",+ "description": "Data input A2 of driver 2, non-inverting to Y2."+ },+ {+ "number": "5",+ "name": "Y2",+ "type": "tri_state",+ "description": "3-state non-inverting output of driver 2, which follows A2 when enabled."+ },+ {+ "number": "6",+ "name": "A3",+ "type": "input",+ "description": "Data input A3 of driver 3, non-inverting to Y3."+ },+ {+ "number": "7",+ "name": "Y3",+ "type": "tri_state",+ "description": "3-state non-inverting output of driver 3, which follows A3 when enabled."+ },+ {+ "number": "8",+ "name": "GND",+ "type": "power_in",+ "description": "Ground terminal; all voltage values are with respect to this network ground terminal."+ },+ {+ "number": "9",+ "name": "Y4",+ "type": "tri_state",+ "description": "3-state non-inverting output of driver 4, which follows A4 when enabled."+ },+ {+ "number": "10",+ "name": "A4",+ "type": "input",+ "description": "Data input A4 of driver 4, non-inverting to Y4."+ },+ {+ "number": "11",+ "name": "Y5",+ "type": "tri_state",+ "description": "3-state non-inverting output of driver 5, which follows A5 when enabled."+ },+ {+ "number": "12",+ "name": "A5",+ "type": "input",+ "description": "Data input A5 of driver 5, non-inverting to Y5."+ },+ {+ "number": "13",+ "name": "Y6",+ "type": "tri_state",+ "description": "3-state non-inverting output of driver 6, which follows A6 when enabled."+ },+ {+ "number": "14",+ "name": "A6",+ "type": "input",+ "description": "Data input A6 of driver 6, non-inverting to Y6."+ },+ {+ "number": "15",+ "name": "G2",+ "type": "input",+ "description": "Active-low output-enable input G2, which is gated with G1 to enable the 3-state outputs of the hex bus driver."+ },+ {+ "number": "16",+ "name": "VCC",+ "type": "power_in",+ "description": "Supply voltage pin; absolute maximum rating is 7 V with respect to ground."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-sonnet-5-5",+ "primary_mode": "vision",+ "consensus_model": "claude-opus-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The datasheet covers the whole SN54/74LS365A-368A family. Pinout taken from the 'SN74LS365A ... D or",+ "vision extraction: provenance cannot be text-verified; needs consensus"+ ],+ "pages_sent": 12,+ "cost_usd": 0.2837,+ "at": "2026-10-07T22:25:10"+ },+ "datasheet": {+ "url": "https://www.ti.com/lit/ds/symlink/sn74ls365a.pdf",+ "pages": 28,+ "sha256": "f3660b50e9237779",+ "source_tier": "mfr"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 16,+ "described": 16,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "sn74ls365adr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6,+ 9.9,+ 1.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "sn74ls365adr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6,+ 9.9,+ 1.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "58511a3b26f199c9e8add9982030074f47b5dbf8c74ed5387dd2f7fe1c73a4c6",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}