component
SN74LS05NSR
Public Made by Adomby adom
Texas Instruments Inverters, SOIC-14-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+50@@ -0,0 +1,50 @@+# SN74LS05NSR++**Texas Instruments** · Inverters · SOIC-14-208mil++SN74LS05NSR from Texas Instruments, in a SOIC-14-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | 1A | input | Input of inverter 1; a logic low input gives a high output (Y = A̅ per the function table, H-to-L and L-to-H). |+| 2 | 1Y | output | Open-collector output of inverter 1; requires an external pullup resistor, and the off-state output voltage is rated at 7 V maximum. |+| 3 | 2A | input | Input of inverter 2; input voltage is rated at 7 V maximum for the LS family. |+| 4 | 2Y | output | Open-collector output of inverter 2; requires an external pullup resistor, and the off-state output voltage is rated at 7 V maximum. |+| 5 | 3A | input | Input of inverter 3; input voltage is rated at 7 V maximum for the LS family. |+| 6 | 3Y | output | Open-collector output of inverter 3; requires an external pullup resistor, and the off-state output voltage is rated at 7 V maximum. |+| 7 | GND | power_in | Ground reference; voltages are specified with respect to the network ground terminal. |+| 8 | 4Y | output | Open-collector output of inverter 4; requires an external pullup resistor, and the off-state output voltage is rated at 7 V maximum. |+| 9 | 4A | input | Input of inverter 4; input voltage is rated at 7 V maximum for the LS family. |+| 10 | 5Y | output | Open-collector output of inverter 5; requires an external pullup resistor, and the off-state output voltage is rated at 7 V maximum. |+| 11 | 5A | input | Input of inverter 5; input voltage is rated at 7 V maximum for the LS family. |+| 12 | 6Y | output | Open-collector output of inverter 6; requires an external pullup resistor, and the off-state output voltage is rated at 7 V maximum. |+| 13 | 6A | input | Input of inverter 6; input voltage is rated at 7 V maximum for the LS family. |+| 14 | VCC | power_in | Supply voltage; recommended range is 4.75 V to 5.25 V for SN74LS05 and the absolute maximum is 7 V. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOIC-14-208mil |+| Category | Logic |+| Pins | 14 |++## CAD (KiCad official)++- Symbol: `SN74LS05NSR`+- Footprint: `Package_SO:SOIC-14_3.9x8.7mm_P1.27mm`+- 3D model: SOIC-14-208mil (KiCad packages3D, STEP)+- 3D model files: `sn74ls05nsr-etched.step` / `sn74ls05nsr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sn74ls05nsr.step` / `sn74ls05nsr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/sn54s05) (28 pp, sha256 `06bfc733a844b0c4`, retrieved 2026-10-08, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/sn74ls05nsr-datasheet.pdf)
page.jsonadded+236@@ -0,0 +1,236 @@+{+ "slug": "sn74ls05nsr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Inverters, SOIC-14-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "logic",+ "sn74ls05nsr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "sn74ls05nsr.kicad_sym",+ "sn74ls05nsr.kicad_mod",+ "sn74ls05nsr.glb",+ "sn74ls05nsr.step",+ "sn74ls05nsr.lbr",+ "docs/hero.png",+ "docs/sn74ls05nsr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "sn74ls05nsr-hero.glb",+ "sn74ls05nsr-hero.overlay.json"+ ],+ "component": {+ "mpn": "SN74LS05NSR",+ "manufacturer": "Texas Instruments",+ "package": "SOIC-14-208mil",+ "pin_count": 14,+ "category": "Logic",+ "subcategory": "Inverters",+ "datasheet": "https://www.ti.com/cn/lit/gpn/sn54s05",+ "parts": {+ "symbol": "sn74ls05nsr.kicad_sym",+ "footprint": "sn74ls05nsr.kicad_mod",+ "model_3d": "sn74ls05nsr-hero.glb",+ "model_3d_plain": "sn74ls05nsr.glb",+ "model_3d_step": "sn74ls05nsr-etched.step",+ "model_3d_step_plain": "sn74ls05nsr.step",+ "lbr": "sn74ls05nsr.lbr"+ },+ "distributor_links": {+ "lcsc": "C2872687",+ "digikey": "296-26502-2-ND",+ "mouser": "595-SN74LS05NSR"+ },+ "distributor_check": {+ "checked_at": "2026-10-08T17:06:11Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-26502-2-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-SN74LS05NSR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "1A",+ "type": "input",+ "description": "Input of inverter 1; a logic low input gives a high output (Y = A̅ per the function table, H-to-L and L-to-H)."+ },+ {+ "number": "2",+ "name": "1Y",+ "type": "output",+ "description": "Open-collector output of inverter 1; requires an external pullup resistor, and the off-state output voltage is rated at 7 V maximum."+ },+ {+ "number": "3",+ "name": "2A",+ "type": "input",+ "description": "Input of inverter 2; input voltage is rated at 7 V maximum for the LS family."+ },+ {+ "number": "4",+ "name": "2Y",+ "type": "output",+ "description": "Open-collector output of inverter 2; requires an external pullup resistor, and the off-state output voltage is rated at 7 V maximum."+ },+ {+ "number": "5",+ "name": "3A",+ "type": "input",+ "description": "Input of inverter 3; input voltage is rated at 7 V maximum for the LS family."+ },+ {+ "number": "6",+ "name": "3Y",+ "type": "output",+ "description": "Open-collector output of inverter 3; requires an external pullup resistor, and the off-state output voltage is rated at 7 V maximum."+ },+ {+ "number": "7",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference; voltages are specified with respect to the network ground terminal."+ },+ {+ "number": "8",+ "name": "4Y",+ "type": "output",+ "description": "Open-collector output of inverter 4; requires an external pullup resistor, and the off-state output voltage is rated at 7 V maximum."+ },+ {+ "number": "9",+ "name": "4A",+ "type": "input",+ "description": "Input of inverter 4; input voltage is rated at 7 V maximum for the LS family."+ },+ {+ "number": "10",+ "name": "5Y",+ "type": "output",+ "description": "Open-collector output of inverter 5; requires an external pullup resistor, and the off-state output voltage is rated at 7 V maximum."+ },+ {+ "number": "11",+ "name": "5A",+ "type": "input",+ "description": "Input of inverter 5; input voltage is rated at 7 V maximum for the LS family."+ },+ {+ "number": "12",+ "name": "6Y",+ "type": "output",+ "description": "Open-collector output of inverter 6; requires an external pullup resistor, and the off-state output voltage is rated at 7 V maximum."+ },+ {+ "number": "13",+ "name": "6A",+ "type": "input",+ "description": "Input of inverter 6; input voltage is rated at 7 V maximum for the LS family."+ },+ {+ "number": "14",+ "name": "VCC",+ "type": "power_in",+ "description": "Supply voltage; recommended range is 4.75 V to 5.25 V for SN74LS05 and the absolute maximum is 7 V."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The top-view pin listing for the D/DB/N/NS packages is garbled in the extracted text. The pin-to-sig; The datasheet has no NS (SOP) package outline or drawing. The only outlines are D (SOIC) and DB (SSO; The LS family ratings in the pin descriptions (input 7 V, off-state output 7 V, VCC 4.75 to 5.25 V r"+ ],+ "pages_sent": 28,+ "cost_usd": 0.1028,+ "at": "2026-10-08T17:05:51"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/sn54s05",+ "pages": 28,+ "sha256": "06bfc733a844b0c4",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 14,+ "described": 14,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "sn74ls05nsr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6,+ 8.7,+ 1.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "3b9a775da256c8afcc28dcddfbc2eb3f266107fe61ce8446d96f2c52b6f44a70",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "sn74ls05nsr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6,+ 8.7,+ 1.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "1312e4802884c9fb87e154d5d56753fe665d32ec695a69195c8923eb22817638",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}