← Commit history
README.md+17−18
@@ -2,28 +2,28 @@  **Texas Instruments** · Pre-ordered Chips · SSOP-16-208mil -SN74HCT139DBR from Texas Instruments, in a SSOP-16-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.+SN74HCT139DBR from Texas Instruments, in a SSOP-16-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.  ## Pinout  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | 1G | input | Active-low enable input for decoder 1; the decoder outputs are driven only when it is low, and it can serve as the data line in demultiplexing applications. |-| 2 | 1A | input | Select input A (least significant) of decoder 1, with a TTL-compatible input threshold (VIH min 2 V, VIL max 0.8 V). |-| 3 | 1B | input | Select input B (most significant) of decoder 1, with a TTL-compatible input threshold (VIH min 2 V, VIL max 0.8 V). |-| 4 | 1Y0 | output | Active-low output 0 of decoder 1, driven low when 1G is low and 1B and 1A are both low, with ±4 mA drive at 5 V. |-| 5 | 1Y1 | output | Active-low output 1 of decoder 1, driven low when 1G is low, 1B is low and 1A is high, with ±4 mA drive at 5 V. |-| 6 | 1Y2 | output | Active-low output 2 of decoder 1, driven low when 1G is low, 1B is high and 1A is low, with ±4 mA drive at 5 V. |-| 7 | 1Y3 | output | Active-low output 3 of decoder 1, driven low when 1G is low and 1B and 1A are both high, with ±4 mA drive at 5 V. |+| 1 | 1G | input | Active-low enable input for decoder 1; can be used as a data line in demultiplexing applications. |+| 2 | 1A | input | Select input A (LSB) for decoder 1; TTL-compatible with VIH 2 V min and VIL 0.8 V max. |+| 3 | 1B | input | Select input B (MSB) for decoder 1; TTL-compatible with VIH 2 V min and VIL 0.8 V max. |+| 4 | 1Y0 | output | Decoder 1 output Y0, active low, driving ±4 mA at 5 V. |+| 5 | 1Y1 | output | Decoder 1 output Y1, active low, driving ±4 mA at 5 V. |+| 6 | 1Y2 | output | Decoder 1 output Y2, active low, driving ±4 mA at 5 V. |+| 7 | 1Y3 | output | Decoder 1 output Y3, active low, driving ±4 mA at 5 V. | | 8 | GND | power_in | Ground reference for the device. |-| 9 | 2Y3 | output | Active-low output 3 of decoder 2, driven low when 2G is low and 2B and 2A are both high, with ±4 mA drive at 5 V. |-| 10 | 2Y2 | output | Active-low output 2 of decoder 2, driven low when 2G is low, 2B is high and 2A is low, with ±4 mA drive at 5 V. |-| 11 | 2Y1 | output | Active-low output 1 of decoder 2, driven low when 2G is low, 2B is low and 2A is high, with ±4 mA drive at 5 V. |-| 12 | 2Y0 | output | Active-low output 0 of decoder 2, driven low when 2G is low and 2B and 2A are both low, with ±4 mA drive at 5 V. |-| 13 | 2B | input | Select input B (most significant) of decoder 2, with a TTL-compatible input threshold (VIH min 2 V, VIL max 0.8 V). |-| 14 | 2A | input | Select input A (least significant) of decoder 2, with a TTL-compatible input threshold (VIH min 2 V, VIL max 0.8 V). |-| 15 | 2G | input | Active-low enable input for decoder 2; the decoder outputs are driven only when it is low, and it can serve as the data line in demultiplexing applications. |-| 16 | VCC | power_in | Supply voltage pin, recommended operating range 4.5 V to 5.5 V, with a 0.1 µF bypass capacitor recommended close to the pin. |+| 9 | 2Y3 | output | Decoder 2 output Y3, active low, driving ±4 mA at 5 V. |+| 10 | 2Y2 | output | Decoder 2 output Y2, active low, driving ±4 mA at 5 V. |+| 11 | 2Y1 | output | Decoder 2 output Y1, active low, driving ±4 mA at 5 V. |+| 12 | 2Y0 | output | Decoder 2 output Y0, active low, driving ±4 mA at 5 V. |+| 13 | 2B | input | Select input B (MSB) for decoder 2; TTL-compatible with VIH 2 V min and VIL 0.8 V max. |+| 14 | 2A | input | Select input A (LSB) for decoder 2; TTL-compatible with VIH 2 V min and VIL 0.8 V max. |+| 15 | 2G | input | Active-low enable input for decoder 2; can be used as a data line in demultiplexing applications. |+| 16 | VCC | power_in | Supply voltage, 4.5 V to 5.5 V recommended, with a 0.1-µF bypass capacitor placed close to the pin. |  ## Key specifications @@ -82,8 +82,7 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/sn74hct139dbr.pdf) (24 pp, sha256 `ae503827edbf70da`, retrieved 2026-11-12, tier: manufacturer)-- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/sn74hct139.pdf) (23 pp, sha256 `2008a255df648fb6`, retrieved 2026-11-13, tier: manufacturer) - **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0). 
docs/sn74hct139dbr-datasheet.pdf
⋯ 1 unchanged line ⋯
package.json+29−30
@@ -1,6 +1,6 @@ {   "slug": "sn74hct139dbr",-  "version": "0.1.0",+  "version": "0.1.1",   "type": "component",   "description": "Texas Instruments Pre-ordered Chips, SSOP-16-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",   "tags": [@@ -28,8 +28,7 @@     "viewers/symbol.html",     "viewers/footprint.html",     "sn74hct139dbr-hero.glb",-    "sn74hct139dbr-hero.overlay.json",-    "sn74hct139dbr-etched.glb"+    "sn74hct139dbr-hero.overlay.json"   ],   "component": {     "mpn": "SN74HCT139DBR",@@ -38,12 +37,12 @@     "pin_count": 16,     "category": "Interface ICs",     "subcategory": "Pre-ordered Chips",-    "datasheet": "https://www.ti.com/lit/ds/symlink/sn74hct139dbr.pdf",+    "datasheet": "https://www.ti.com/lit/ds/symlink/sn74hct139.pdf",     "parts": {       "symbol": "sn74hct139dbr.kicad_sym",       "footprint": "sn74hct139dbr.kicad_mod",       "model_3d": "sn74hct139dbr-hero.glb",-      "model_3d_plain": "sn74hct139dbr-etched.glb",+      "model_3d_plain": "sn74hct139dbr.glb",       "model_3d_step": "sn74hct139dbr-etched.step",       "model_3d_step_plain": "sn74hct139dbr.step",       "lbr": "sn74hct139dbr.lbr"@@ -54,7 +53,7 @@       "mouser": "595-SN74HCT139DBR"     },     "distributor_check": {-      "checked_at": "2026-11-12T04:58:55Z",+      "checked_at": "2026-11-13T07:49:20Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "296-SN74HCT139DBRTR-ND",@@ -70,43 +69,43 @@         "number": "1",         "name": "1G",         "type": "input",-        "description": "Active-low enable input for decoder 1; the decoder outputs are driven only when it is low, and it can serve as the data line in demultiplexing applications."+        "description": "Active-low enable input for decoder 1; can be used as a data line in demultiplexing applications."       },       {         "number": "2",         "name": "1A",         "type": "input",-        "description": "Select input A (least significant) of decoder 1, with a TTL-compatible input threshold (VIH min 2 V, VIL max 0.8 V)."+        "description": "Select input A (LSB) for decoder 1; TTL-compatible with VIH 2 V min and VIL 0.8 V max."       },       {         "number": "3",         "name": "1B",         "type": "input",-        "description": "Select input B (most significant) of decoder 1, with a TTL-compatible input threshold (VIH min 2 V, VIL max 0.8 V)."+        "description": "Select input B (MSB) for decoder 1; TTL-compatible with VIH 2 V min and VIL 0.8 V max."       },       {         "number": "4",         "name": "1Y0",         "type": "output",-        "description": "Active-low output 0 of decoder 1, driven low when 1G is low and 1B and 1A are both low, with ±4 mA drive at 5 V."+        "description": "Decoder 1 output Y0, active low, driving ±4 mA at 5 V."       },       {         "number": "5",         "name": "1Y1",         "type": "output",-        "description": "Active-low output 1 of decoder 1, driven low when 1G is low, 1B is low and 1A is high, with ±4 mA drive at 5 V."+        "description": "Decoder 1 output Y1, active low, driving ±4 mA at 5 V."       },       {         "number": "6",         "name": "1Y2",         "type": "output",-        "description": "Active-low output 2 of decoder 1, driven low when 1G is low, 1B is high and 1A is low, with ±4 mA drive at 5 V."+        "description": "Decoder 1 output Y2, active low, driving ±4 mA at 5 V."       },       {         "number": "7",         "name": "1Y3",         "type": "output",-        "description": "Active-low output 3 of decoder 1, driven low when 1G is low and 1B and 1A are both high, with ±4 mA drive at 5 V."+        "description": "Decoder 1 output Y3, active low, driving ±4 mA at 5 V."       },       {         "number": "8",@@ -118,49 +117,49 @@         "number": "9",         "name": "2Y3",         "type": "output",-        "description": "Active-low output 3 of decoder 2, driven low when 2G is low and 2B and 2A are both high, with ±4 mA drive at 5 V."+        "description": "Decoder 2 output Y3, active low, driving ±4 mA at 5 V."       },       {         "number": "10",         "name": "2Y2",         "type": "output",-        "description": "Active-low output 2 of decoder 2, driven low when 2G is low, 2B is high and 2A is low, with ±4 mA drive at 5 V."+        "description": "Decoder 2 output Y2, active low, driving ±4 mA at 5 V."       },       {         "number": "11",         "name": "2Y1",         "type": "output",-        "description": "Active-low output 1 of decoder 2, driven low when 2G is low, 2B is low and 2A is high, with ±4 mA drive at 5 V."+        "description": "Decoder 2 output Y1, active low, driving ±4 mA at 5 V."       },       {         "number": "12",         "name": "2Y0",         "type": "output",-        "description": "Active-low output 0 of decoder 2, driven low when 2G is low and 2B and 2A are both low, with ±4 mA drive at 5 V."+        "description": "Decoder 2 output Y0, active low, driving ±4 mA at 5 V."       },       {         "number": "13",         "name": "2B",         "type": "input",-        "description": "Select input B (most significant) of decoder 2, with a TTL-compatible input threshold (VIH min 2 V, VIL max 0.8 V)."+        "description": "Select input B (MSB) for decoder 2; TTL-compatible with VIH 2 V min and VIL 0.8 V max."       },       {         "number": "14",         "name": "2A",         "type": "input",-        "description": "Select input A (least significant) of decoder 2, with a TTL-compatible input threshold (VIH min 2 V, VIL max 0.8 V)."+        "description": "Select input A (LSB) for decoder 2; TTL-compatible with VIH 2 V min and VIL 0.8 V max."       },       {         "number": "15",         "name": "2G",         "type": "input",-        "description": "Active-low enable input for decoder 2; the decoder outputs are driven only when it is low, and it can serve as the data line in demultiplexing applications."+        "description": "Active-low enable input for decoder 2; can be used as a data line in demultiplexing applications."       },       {         "number": "16",         "name": "VCC",         "type": "power_in",-        "description": "Supply voltage pin, recommended operating range 4.5 V to 5.5 V, with a 0.1 µF bypass capacitor recommended close to the pin."+        "description": "Supply voltage, 4.5 V to 5.5 V recommended, with a 0.1-µF bypass capacitor placed close to the pin."       }     ],     "provenance": {@@ -176,14 +175,14 @@         "guard_notes": [           "vision extraction: provenance cannot be text-verified; needs consensus"         ],-        "pages_sent": 24,-        "cost_usd": 0.3254,-        "at": "2026-11-12T04:58:44"+        "pages_sent": 23,+        "cost_usd": 0.4096,+        "at": "2026-11-13T07:49:13"       },       "datasheet": {-        "url": "https://www.ti.com/lit/ds/symlink/sn74hct139dbr.pdf",-        "pages": 24,-        "sha256": "ae503827edbf70da",+        "url": "https://www.ti.com/lit/ds/symlink/sn74hct139.pdf",+        "pages": 23,+        "sha256": "2008a255df648fb6",         "source_tier": "mfr"       },       "cad": "KiCad official (CC-BY-SA 4.0)",@@ -215,7 +214,7 @@         "centre_offset_mm": 0.0,         "footprint_binding": "identity",         "sha256": "d0e11e46aeca5dbaa5c4bb538f3f4899761267cabdeba6486325ae9e979c03ef",-        "checked": "2026-11-12",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -233,8 +232,8 @@         "zmin_mm": 0.0,         "centre_offset_mm": 0.0,         "footprint_binding": "identity",-        "sha256": "d8c54c619916d6e14078f5cd91306c04b7698af1f7f2d5d6fe1be1f1799b86e7",-        "checked": "2026-11-12",+        "sha256": "53136c4eb3e62f1665b026b96204389367c0f667b22d735c9c1df81041371c3c",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ],
page.json+41−39
@@ -4,7 +4,7 @@   "slug": "sn74hct139dbr",   "title": "SN74HCT139DBR",   "brief": "Texas Instruments Pre-ordered Chips, SSOP-16-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.1.0",+  "version": "0.1.1",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -20,12 +20,12 @@     "pin_count": 16,     "category": "Interface ICs",     "subcategory": "Pre-ordered Chips",-    "datasheet": "https://www.ti.com/lit/ds/symlink/sn74hct139dbr.pdf",+    "datasheet": "https://www.ti.com/lit/ds/symlink/sn74hct139.pdf",     "parts": {       "symbol": "sn74hct139dbr.kicad_sym",       "footprint": "sn74hct139dbr.kicad_mod",       "model_3d": "sn74hct139dbr-hero.glb",-      "model_3d_plain": "sn74hct139dbr-etched.glb",+      "model_3d_plain": "sn74hct139dbr.glb",       "model_3d_step": "sn74hct139dbr-etched.step",       "model_3d_step_plain": "sn74hct139dbr.step",       "lbr": "sn74hct139dbr.lbr"@@ -36,7 +36,7 @@       "mouser": "595-SN74HCT139DBR"     },     "distributor_check": {-      "checked_at": "2026-11-12T04:58:55Z",+      "checked_at": "2026-11-13T07:49:20Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "296-SN74HCT139DBRTR-ND",@@ -52,43 +52,43 @@         "number": "1",         "name": "1G",         "type": "input",-        "description": "Active-low enable input for decoder 1; the decoder outputs are driven only when it is low, and it can serve as the data line in demultiplexing applications."+        "description": "Active-low enable input for decoder 1; can be used as a data line in demultiplexing applications."       },       {         "number": "2",         "name": "1A",         "type": "input",-        "description": "Select input A (least significant) of decoder 1, with a TTL-compatible input threshold (VIH min 2 V, VIL max 0.8 V)."+        "description": "Select input A (LSB) for decoder 1; TTL-compatible with VIH 2 V min and VIL 0.8 V max."       },       {         "number": "3",         "name": "1B",         "type": "input",-        "description": "Select input B (most significant) of decoder 1, with a TTL-compatible input threshold (VIH min 2 V, VIL max 0.8 V)."+        "description": "Select input B (MSB) for decoder 1; TTL-compatible with VIH 2 V min and VIL 0.8 V max."       },       {         "number": "4",         "name": "1Y0",         "type": "output",-        "description": "Active-low output 0 of decoder 1, driven low when 1G is low and 1B and 1A are both low, with ±4 mA drive at 5 V."+        "description": "Decoder 1 output Y0, active low, driving ±4 mA at 5 V."       },       {         "number": "5",         "name": "1Y1",         "type": "output",-        "description": "Active-low output 1 of decoder 1, driven low when 1G is low, 1B is low and 1A is high, with ±4 mA drive at 5 V."+        "description": "Decoder 1 output Y1, active low, driving ±4 mA at 5 V."       },       {         "number": "6",         "name": "1Y2",         "type": "output",-        "description": "Active-low output 2 of decoder 1, driven low when 1G is low, 1B is high and 1A is low, with ±4 mA drive at 5 V."+        "description": "Decoder 1 output Y2, active low, driving ±4 mA at 5 V."       },       {         "number": "7",         "name": "1Y3",         "type": "output",-        "description": "Active-low output 3 of decoder 1, driven low when 1G is low and 1B and 1A are both high, with ±4 mA drive at 5 V."+        "description": "Decoder 1 output Y3, active low, driving ±4 mA at 5 V."       },       {         "number": "8",@@ -100,49 +100,49 @@         "number": "9",         "name": "2Y3",         "type": "output",-        "description": "Active-low output 3 of decoder 2, driven low when 2G is low and 2B and 2A are both high, with ±4 mA drive at 5 V."+        "description": "Decoder 2 output Y3, active low, driving ±4 mA at 5 V."       },       {         "number": "10",         "name": "2Y2",         "type": "output",-        "description": "Active-low output 2 of decoder 2, driven low when 2G is low, 2B is high and 2A is low, with ±4 mA drive at 5 V."+        "description": "Decoder 2 output Y2, active low, driving ±4 mA at 5 V."       },       {         "number": "11",         "name": "2Y1",         "type": "output",-        "description": "Active-low output 1 of decoder 2, driven low when 2G is low, 2B is low and 2A is high, with ±4 mA drive at 5 V."+        "description": "Decoder 2 output Y1, active low, driving ±4 mA at 5 V."       },       {         "number": "12",         "name": "2Y0",         "type": "output",-        "description": "Active-low output 0 of decoder 2, driven low when 2G is low and 2B and 2A are both low, with ±4 mA drive at 5 V."+        "description": "Decoder 2 output Y0, active low, driving ±4 mA at 5 V."       },       {         "number": "13",         "name": "2B",         "type": "input",-        "description": "Select input B (most significant) of decoder 2, with a TTL-compatible input threshold (VIH min 2 V, VIL max 0.8 V)."+        "description": "Select input B (MSB) for decoder 2; TTL-compatible with VIH 2 V min and VIL 0.8 V max."       },       {         "number": "14",         "name": "2A",         "type": "input",-        "description": "Select input A (least significant) of decoder 2, with a TTL-compatible input threshold (VIH min 2 V, VIL max 0.8 V)."+        "description": "Select input A (LSB) for decoder 2; TTL-compatible with VIH 2 V min and VIL 0.8 V max."       },       {         "number": "15",         "name": "2G",         "type": "input",-        "description": "Active-low enable input for decoder 2; the decoder outputs are driven only when it is low, and it can serve as the data line in demultiplexing applications."+        "description": "Active-low enable input for decoder 2; can be used as a data line in demultiplexing applications."       },       {         "number": "16",         "name": "VCC",         "type": "power_in",-        "description": "Supply voltage pin, recommended operating range 4.5 V to 5.5 V, with a 0.1 µF bypass capacitor recommended close to the pin."+        "description": "Supply voltage, 4.5 V to 5.5 V recommended, with a 0.1-µF bypass capacitor placed close to the pin."       }     ],     "provenance": {@@ -158,14 +158,14 @@         "guard_notes": [           "vision extraction: provenance cannot be text-verified; needs consensus"         ],-        "pages_sent": 24,-        "cost_usd": 0.3254,-        "at": "2026-11-12T04:58:44"+        "pages_sent": 23,+        "cost_usd": 0.4096,+        "at": "2026-11-13T07:49:13"       },       "datasheet": {-        "url": "https://www.ti.com/lit/ds/symlink/sn74hct139dbr.pdf",-        "pages": 24,-        "sha256": "ae503827edbf70da",+        "url": "https://www.ti.com/lit/ds/symlink/sn74hct139.pdf",+        "pages": 23,+        "sha256": "2008a255df648fb6",         "source_tier": "mfr"       },       "cad": "KiCad official (CC-BY-SA 4.0)",@@ -193,11 +193,11 @@           6.2,           2.1         ],-        "zmin_mm": 0.0,-        "centre_offset_mm": 0.0,+        "zmin_mm": 0,+        "centre_offset_mm": 0,         "footprint_binding": "identity",         "sha256": "d0e11e46aeca5dbaa5c4bb538f3f4899761267cabdeba6486325ae9e979c03ef",-        "checked": "2026-11-12",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -212,11 +212,11 @@           6.2,           2.1         ],-        "zmin_mm": 0.0,-        "centre_offset_mm": 0.0,+        "zmin_mm": 0,+        "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "d8c54c619916d6e14078f5cd91306c04b7698af1f7f2d5d6fe1be1f1799b86e7",-        "checked": "2026-11-12",+        "sha256": "53136c4eb3e62f1665b026b96204389367c0f667b22d735c9c1df81041371c3c",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ],@@ -233,7 +233,7 @@       "E1": {         "nom_mm": 5.3,         "range_mm": [-          5.0,+          5,           5.6         ]       },@@ -252,10 +252,10 @@         ]       },       "A": {-        "nom_mm": 2.0,+        "nom_mm": 2,         "range_mm": [           null,-          2.0+          2         ]       },       "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",@@ -678,7 +678,9 @@     "viewers/symbol.html",     "viewers/footprint.html",     "sn74hct139dbr-hero.glb",-    "sn74hct139dbr-hero.overlay.json",-    "sn74hct139dbr-etched.glb"-  ]-}+    "sn74hct139dbr-hero.overlay.json"+  ],+  "description": "Texas Instruments Pre-ordered Chips, SSOP-16-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "visibility": "private",+  "org": "adom"+}\ No newline at end of file
sn74hct139dbr-hero.overlay.json+439−434
@@ -1,436 +1,441 @@ {-  "spec": "adom-hero 1.4",-  "mpn": "SN74HCT139DBR",-  "kind": "component + footprint reference art",-  "board_use": false,-  "plane_z_mm": -0.02,-  "units": "metre",-  "upAxis": "Z",-  "layers": {-    "pad_outlines": {-      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",-      "rgba": [-        0.0,-        0.902,-        0.863,-        0.5-      ],-      "pads": 16,-      "span_mm": 8.6,-      "dash_mm": 0.215,-      "gap_mm": 0.129,-      "pad_stroke_mm": 0.0516-    },-    "silkscreen": {-      "material": "Silkscreen reference lines - 30 percent opacity",-      "rgba": [-        0.92,-        0.96,-        1.0,-        0.3-      ],-      "footprint_items": 7,-      "pin1": {-        "source": "footprint silkscreen",-        "pad": "1"-      }-    },-    "signal_names": {-      "material": "Signal names - 50 percent opacity",-      "rgba": [-        0.92,-        0.96,-        1.0,-        0.5-      ],-      "font": "DejaVu Sans Mono",-      "labels": 16,-      "sides": "top + mirrored underside (single-sided)",-      "fallback_to_pad_number": 0-    }-  },-  "align": {-    "ok": true,-    "centre_offset_mm": 0.0,-    "tolerance_mm": 0.688,-    "orientation_flipped": false,-    "contacts_bbox_mm": [-      -3.9,-      3.9,-      -2.905,-      2.905-    ],-    "pads_bbox_mm": [-      -4.3,-      4.3,-      -2.525,-      2.525-    ],-    "seating_z_mm": 0.0-  },-  "sources": {-    "glb": "sn74hct139dbr-etched.glb",-    "glb_sha256": "d35ad5713d937626bc26651a8be288995e9067de2feb76fc0e55a114fa2f4536",-    "footprint": "sn74hct139dbr.kicad_mod",-    "footprint_sha256": "fb95d86f94d64e65b3a64e32a8f0ec8e18408e4bd871cbfbc47df2b6b66db93c",-    "pins": "page.json component.pins",-    "pins_sha256": "1155f6bf271e48fe5b63ed002861b604d5c5d107c59b9a2234f8b02257e9774a"-  },-  "generator": "adom-wiki 1.8.22 (component_hero)",-  "labels": [-    {-      "pad": "1",-      "text": "1G",-      "x": -4.4,-      "y": -2.275,-      "align": "right",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "2",-      "text": "1A",-      "x": -4.4,-      "y": -1.625,-      "align": "right",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "3",-      "text": "1B",-      "x": -4.4,-      "y": -0.975,-      "align": "right",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "4",-      "text": "1Y0",-      "x": -4.4,-      "y": -0.325,-      "align": "right",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "5",-      "text": "1Y1",-      "x": -4.4,-      "y": 0.325,-      "align": "right",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "6",-      "text": "1Y2",-      "x": -4.4,-      "y": 0.975,-      "align": "right",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "7",-      "text": "1Y3",-      "x": -4.4,-      "y": 1.625,-      "align": "right",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "8",-      "text": "GND",-      "x": -4.4,-      "y": 2.275,-      "align": "right",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "9",-      "text": "2Y3",-      "x": 4.4,-      "y": 2.275,-      "align": "left",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "10",-      "text": "2Y2",-      "x": 4.4,-      "y": 1.625,-      "align": "left",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "11",-      "text": "2Y1",-      "x": 4.4,-      "y": 0.975,-      "align": "left",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "12",-      "text": "2Y0",-      "x": 4.4,-      "y": 0.325,-      "align": "left",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "13",-      "text": "2B",-      "x": 4.4,-      "y": -0.325,-      "align": "left",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "14",-      "text": "2A",-      "x": 4.4,-      "y": -0.975,-      "align": "left",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "15",-      "text": "2G",-      "x": 4.4,-      "y": -1.625,-      "align": "left",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "16",-      "text": "VCC",-      "x": 4.4,-      "y": -2.275,-      "align": "left",-      "vertical": false,-      "h": 0.325-    }+ "spec": "adom-hero 1.4",+ "mpn": "SN74HCT139DBR",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+  "pad_outlines": {+   "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+   "rgba": [+    0.0,+    0.902,+    0.863,+    0.5+   ],+   "pads": 16,+   "span_mm": 8.6,+   "dash_mm": 0.215,+   "gap_mm": 0.129,+   "pad_stroke_mm": 0.0516+  },+  "silkscreen": {+   "material": "Silkscreen reference lines - 30 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.3+   ],+   "footprint_items": 7,+   "pin1": {+    "source": "footprint silkscreen",+    "pad": "1"+   }+  },+  "signal_names": {+   "material": "Signal names - 50 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.5+   ],+   "font": "DejaVu Sans Mono",+   "labels": 16,+   "sides": "top + mirrored underside (single-sided)",+   "omitted": null,+   "fallback_to_pad_number": 0+  }+ },+ "align": {+  "ok": true,+  "board_underside": true,+  "electrical_pads_without_contact": [],+  "mounting_pads_left_out": [],+  "centre_offset_mm": 0.0,+  "over_pads": true,+  "tolerance_mm": 0.688,+  "orientation_flipped": false,+  "contacts_bbox_mm": [+   -3.9,+   3.9,+   -2.905,+   2.905+  ],+  "pads_bbox_mm": [+   -4.3,+   4.3,+   -2.525,+   2.525   ],-  "pads": [-    {-      "number": "1",-      "shape": "roundrect",-      "center_mm": [-        -3.4125,-        -2.275-      ],-      "size_mm": [-        1.775,-        0.5-      ],-      "rot": 0.0-    },-    {-      "number": "2",-      "shape": "roundrect",-      "center_mm": [-        -3.4125,-        -1.625-      ],-      "size_mm": [-        1.775,-        0.5-      ],-      "rot": 0.0-    },-    {-      "number": "3",-      "shape": "roundrect",-      "center_mm": [-        -3.4125,-        -0.975-      ],-      "size_mm": [-        1.775,-        0.5-      ],-      "rot": 0.0-    },-    {-      "number": "4",-      "shape": "roundrect",-      "center_mm": [-        -3.4125,-        -0.325-      ],-      "size_mm": [-        1.775,-        0.5-      ],-      "rot": 0.0-    },-    {-      "number": "5",-      "shape": "roundrect",-      "center_mm": [-        -3.4125,-        0.325-      ],-      "size_mm": [-        1.775,-        0.5-      ],-      "rot": 0.0-    },-    {-      "number": "6",-      "shape": "roundrect",-      "center_mm": [-        -3.4125,-        0.975-      ],-      "size_mm": [-        1.775,-        0.5-      ],-      "rot": 0.0-    },-    {-      "number": "7",-      "shape": "roundrect",-      "center_mm": [-        -3.4125,-        1.625-      ],-      "size_mm": [-        1.775,-        0.5-      ],-      "rot": 0.0-    },-    {-      "number": "8",-      "shape": "roundrect",-      "center_mm": [-        -3.4125,-        2.275-      ],-      "size_mm": [-        1.775,-        0.5-      ],-      "rot": 0.0-    },-    {-      "number": "9",-      "shape": "roundrect",-      "center_mm": [-        3.4125,-        2.275-      ],-      "size_mm": [-        1.775,-        0.5-      ],-      "rot": 0.0-    },-    {-      "number": "10",-      "shape": "roundrect",-      "center_mm": [-        3.4125,-        1.625-      ],-      "size_mm": [-        1.775,-        0.5-      ],-      "rot": 0.0-    },-    {-      "number": "11",-      "shape": "roundrect",-      "center_mm": [-        3.4125,-        0.975-      ],-      "size_mm": [-        1.775,-        0.5-      ],-      "rot": 0.0-    },-    {-      "number": "12",-      "shape": "roundrect",-      "center_mm": [-        3.4125,-        0.325-      ],-      "size_mm": [-        1.775,-        0.5-      ],-      "rot": 0.0-    },-    {-      "number": "13",-      "shape": "roundrect",-      "center_mm": [-        3.4125,-        -0.325-      ],-      "size_mm": [-        1.775,-        0.5-      ],-      "rot": 0.0-    },-    {-      "number": "14",-      "shape": "roundrect",-      "center_mm": [-        3.4125,-        -0.975-      ],-      "size_mm": [-        1.775,-        0.5-      ],-      "rot": 0.0-    },-    {-      "number": "15",-      "shape": "roundrect",-      "center_mm": [-        3.4125,-        -1.625-      ],-      "size_mm": [-        1.775,-        0.5-      ],-      "rot": 0.0-    },-    {-      "number": "16",-      "shape": "roundrect",-      "center_mm": [-        3.4125,-        -2.275-      ],-      "size_mm": [-        1.775,-        0.5-      ],-      "rot": 0.0-    }-  ]-}+  "seating_z_mm": 0.0+ },+ "sources": {+  "glb": "sn74hct139dbr-etched.glb",+  "glb_sha256": "d35ad5713d937626bc26651a8be288995e9067de2feb76fc0e55a114fa2f4536",+  "footprint": "sn74hct139dbr.kicad_mod",+  "footprint_sha256": "fb95d86f94d64e65b3a64e32a8f0ec8e18408e4bd871cbfbc47df2b6b66db93c",+  "pins": "page.json component.pins",+  "pins_sha256": "1155f6bf271e48fe5b63ed002861b604d5c5d107c59b9a2234f8b02257e9774a"+ },+ "generator": "factory/hero_glb.py",+ "labels": [+  {+   "pad": "1",+   "text": "1G",+   "x": -4.4,+   "y": -2.275,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "2",+   "text": "1A",+   "x": -4.4,+   "y": -1.625,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "3",+   "text": "1B",+   "x": -4.4,+   "y": -0.975,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "4",+   "text": "1Y0",+   "x": -4.4,+   "y": -0.325,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "5",+   "text": "1Y1",+   "x": -4.4,+   "y": 0.325,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "6",+   "text": "1Y2",+   "x": -4.4,+   "y": 0.975,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "7",+   "text": "1Y3",+   "x": -4.4,+   "y": 1.625,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "8",+   "text": "GND",+   "x": -4.4,+   "y": 2.275,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "9",+   "text": "2Y3",+   "x": 4.4,+   "y": 2.275,+   "align": "left",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "10",+   "text": "2Y2",+   "x": 4.4,+   "y": 1.625,+   "align": "left",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "11",+   "text": "2Y1",+   "x": 4.4,+   "y": 0.975,+   "align": "left",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "12",+   "text": "2Y0",+   "x": 4.4,+   "y": 0.325,+   "align": "left",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "13",+   "text": "2B",+   "x": 4.4,+   "y": -0.325,+   "align": "left",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "14",+   "text": "2A",+   "x": 4.4,+   "y": -0.975,+   "align": "left",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "15",+   "text": "2G",+   "x": 4.4,+   "y": -1.625,+   "align": "left",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "16",+   "text": "VCC",+   "x": 4.4,+   "y": -2.275,+   "align": "left",+   "vertical": false,+   "h": 0.325+  }+ ],+ "pads": [+  {+   "number": "1",+   "shape": "roundrect",+   "center_mm": [+    -3.4125,+    -2.275+   ],+   "size_mm": [+    1.775,+    0.5+   ],+   "rot": 0.0+  },+  {+   "number": "2",+   "shape": "roundrect",+   "center_mm": [+    -3.4125,+    -1.625+   ],+   "size_mm": [+    1.775,+    0.5+   ],+   "rot": 0.0+  },+  {+   "number": "3",+   "shape": "roundrect",+   "center_mm": [+    -3.4125,+    -0.975+   ],+   "size_mm": [+    1.775,+    0.5+   ],+   "rot": 0.0+  },+  {+   "number": "4",+   "shape": "roundrect",+   "center_mm": [+    -3.4125,+    -0.325+   ],+   "size_mm": [+    1.775,+    0.5+   ],+   "rot": 0.0+  },+  {+   "number": "5",+   "shape": "roundrect",+   "center_mm": [+    -3.4125,+    0.325+   ],+   "size_mm": [+    1.775,+    0.5+   ],+   "rot": 0.0+  },+  {+   "number": "6",+   "shape": "roundrect",+   "center_mm": [+    -3.4125,+    0.975+   ],+   "size_mm": [+    1.775,+    0.5+   ],+   "rot": 0.0+  },+  {+   "number": "7",+   "shape": "roundrect",+   "center_mm": [+    -3.4125,+    1.625+   ],+   "size_mm": [+    1.775,+    0.5+   ],+   "rot": 0.0+  },+  {+   "number": "8",+   "shape": "roundrect",+   "center_mm": [+    -3.4125,+    2.275+   ],+   "size_mm": [+    1.775,+    0.5+   ],+   "rot": 0.0+  },+  {+   "number": "9",+   "shape": "roundrect",+   "center_mm": [+    3.4125,+    2.275+   ],+   "size_mm": [+    1.775,+    0.5+   ],+   "rot": 0.0+  },+  {+   "number": "10",+   "shape": "roundrect",+   "center_mm": [+    3.4125,+    1.625+   ],+   "size_mm": [+    1.775,+    0.5+   ],+   "rot": 0.0+  },+  {+   "number": "11",+   "shape": "roundrect",+   "center_mm": [+    3.4125,+    0.975+   ],+   "size_mm": [+    1.775,+    0.5+   ],+   "rot": 0.0+  },+  {+   "number": "12",+   "shape": "roundrect",+   "center_mm": [+    3.4125,+    0.325+   ],+   "size_mm": [+    1.775,+    0.5+   ],+   "rot": 0.0+  },+  {+   "number": "13",+   "shape": "roundrect",+   "center_mm": [+    3.4125,+    -0.325+   ],+   "size_mm": [+    1.775,+    0.5+   ],+   "rot": 0.0+  },+  {+   "number": "14",+   "shape": "roundrect",+   "center_mm": [+    3.4125,+    -0.975+   ],+   "size_mm": [+    1.775,+    0.5+   ],+   "rot": 0.0+  },+  {+   "number": "15",+   "shape": "roundrect",+   "center_mm": [+    3.4125,+    -1.625+   ],+   "size_mm": [+    1.775,+    0.5+   ],+   "rot": 0.0+  },+  {+   "number": "16",+   "shape": "roundrect",+   "center_mm": [+    3.4125,+    -2.275+   ],+   "size_mm": [+    1.775,+    0.5+   ],+   "rot": 0.0+  }+ ]+}\ No newline at end of file