← Commit history

Initial commit: component/sn74hc191dr

Ray ·98d5918fcb ·
2 files changed +257
README.mdadded+52
@@ -0,0 +1,52 @@+# SN74HC191DR++**Texas Instruments** · Counters, Dividers · SOIC-16++SN74HC191DR from Texas Instruments, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | B | input | Data input B for parallel load of counter bit 1; active when LOAD is low, allowing the data to be transferred to output QB asynchronously. |+| 2 | QB | output | Counter output bit 1; asynchronously affected by LOAD input data and synchronously affected by CLK when CTEN is low. |+| 3 | QA | output | Counter output bit 0 (least significant bit); asynchronously affected by LOAD input data and synchronously affected by CLK when CTEN is low. |+| 4 | CTEN | input | Count enable input; when low, enables counting; when high, inhibits counting and holds the counter outputs. |+| 5 | D/U | input | Down/up direction control input; when low, counter counts up; when high, counter counts down. |+| 6 | QC | output | Counter output bit 2; asynchronously affected by LOAD input data and synchronously affected by CLK when CTEN is low. |+| 7 | QD | output | Counter output bit 3 (most significant bit); asynchronously affected by LOAD input data and synchronously affected by CLK when CTEN is low. |+| 8 | GND | power_in | Ground reference (0 V connection). |+| 9 | D | input | Data input D for parallel load of counter bit 3 (most significant bit); active when LOAD is low, allowing the data to be transferred to output QD asynchronously. |+| 10 | C | input | Data input C for parallel load of counter bit 2; active when LOAD is low, allowing the data to be transferred to output QC asynchronously. |+| 11 | LOAD | input | Parallel load control input; when low, asynchronously loads data from inputs A, B, C, D into outputs QA, QB, QC, QD, overriding the count operation. |+| 12 | MAX/MIN | output | Maximum/minimum count output; produces a high-level pulse approximately one clock cycle duration when count reaches zero (all outputs low) while counting down or maximum (binary 15) while counting up. |+| 13 | RCO | output | Ripple clock output; produces a low-level pulse under the same conditions as MAX/MIN but only while CLK is low, used for cascading multiple counters. |+| 14 | CLK | input | Clock input; counter outputs change on the low-to-high transition when CTEN is low; operating frequency 2 V to 6 V per recommended operating conditions. |+| 15 | A | input | Data input A for parallel load of counter bit 0 (least significant bit); active when LOAD is low, allowing the data to be transferred to output QA asynchronously. |+| 16 | VCC | power_in | Positive power supply voltage ranging from 2 V to 6 V per recommended operating conditions. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOIC-16 |+| Category | Logic |+| Pins | 16 |++## CAD (KiCad official)++- Symbol: `SN74HC191DR`+- Footprint: `Package_SO:SOIC-16_3.9x9.9mm_P1.27mm`+- 3D model: SOIC-16 (KiCad packages3D, STEP)+- 3D model files: `sn74hc191dr-etched.step` / `sn74hc191dr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sn74hc191dr.step` / `sn74hc191dr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/sn74hc191.pdf) (22 pp, sha256 `ca8f1cf1eb9fc572`, retrieved 2026-09-26, tier: manufacturer)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/sn74hc191dr-datasheet.pdf)
page.jsonadded+205
@@ -0,0 +1,205 @@+{+  "slug": "sn74hc191dr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Counters, Dividers, SOIC-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "logic",+    "sn74hc191dr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "sn74hc191dr.kicad_sym",+    "sn74hc191dr.kicad_mod",+    "sn74hc191dr.glb",+    "sn74hc191dr.step",+    "sn74hc191dr.lbr",+    "docs/hero.png",+    "docs/sn74hc191dr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "SN74HC191DR",+    "manufacturer": "Texas Instruments",+    "package": "SOIC-16",+    "pin_count": 16,+    "category": "Logic",+    "subcategory": "Counters, Dividers",+    "datasheet": "https://www.ti.com/lit/ds/symlink/sn74hc191.pdf",+    "parts": {+      "symbol": "sn74hc191dr.kicad_sym",+      "footprint": "sn74hc191dr.kicad_mod",+      "model_3d": "sn74hc191dr-etched.glb",+      "model_3d_plain": "sn74hc191dr.glb",+      "model_3d_step": "sn74hc191dr-etched.step",+      "model_3d_step_plain": "sn74hc191dr.step",+      "lbr": "sn74hc191dr.lbr"+    },+    "distributor_links": {+      "lcsc": "C484752",+      "digikey": "296-14841-2-ND",+      "mouser": "595-SN74HC191DR"+    },+    "distributor_check": {+      "checked_at": "2026-09-26T21:50:34Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "296-14841-2-ND",+        "status": "found"+      },+      "mouser": {+        "pn": "595-SN74HC191DR",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "B",+        "type": "input",+        "description": "Data input B for parallel load of counter bit 1; active when LOAD is low, allowing the data to be transferred to output QB asynchronously."+      },+      {+        "number": "2",+        "name": "QB",+        "type": "output",+        "description": "Counter output bit 1; asynchronously affected by LOAD input data and synchronously affected by CLK when CTEN is low."+      },+      {+        "number": "3",+        "name": "QA",+        "type": "output",+        "description": "Counter output bit 0 (least significant bit); asynchronously affected by LOAD input data and synchronously affected by CLK when CTEN is low."+      },+      {+        "number": "4",+        "name": "CTEN",+        "type": "input",+        "description": "Count enable input; when low, enables counting; when high, inhibits counting and holds the counter outputs."+      },+      {+        "number": "5",+        "name": "D/U",+        "type": "input",+        "description": "Down/up direction control input; when low, counter counts up; when high, counter counts down."+      },+      {+        "number": "6",+        "name": "QC",+        "type": "output",+        "description": "Counter output bit 2; asynchronously affected by LOAD input data and synchronously affected by CLK when CTEN is low."+      },+      {+        "number": "7",+        "name": "QD",+        "type": "output",+        "description": "Counter output bit 3 (most significant bit); asynchronously affected by LOAD input data and synchronously affected by CLK when CTEN is low."+      },+      {+        "number": "8",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference (0 V connection)."+      },+      {+        "number": "9",+        "name": "D",+        "type": "input",+        "description": "Data input D for parallel load of counter bit 3 (most significant bit); active when LOAD is low, allowing the data to be transferred to output QD asynchronously."+      },+      {+        "number": "10",+        "name": "C",+        "type": "input",+        "description": "Data input C for parallel load of counter bit 2; active when LOAD is low, allowing the data to be transferred to output QC asynchronously."+      },+      {+        "number": "11",+        "name": "LOAD",+        "type": "input",+        "description": "Parallel load control input; when low, asynchronously loads data from inputs A, B, C, D into outputs QA, QB, QC, QD, overriding the count operation."+      },+      {+        "number": "12",+        "name": "MAX/MIN",+        "type": "output",+        "description": "Maximum/minimum count output; produces a high-level pulse approximately one clock cycle duration when count reaches zero (all outputs low) while counting down or maximum (binary 15) while counting up."+      },+      {+        "number": "13",+        "name": "RCO",+        "type": "output",+        "description": "Ripple clock output; produces a low-level pulse under the same conditions as MAX/MIN but only while CLK is low, used for cascading multiple counters."+      },+      {+        "number": "14",+        "name": "CLK",+        "type": "input",+        "description": "Clock input; counter outputs change on the low-to-high transition when CTEN is low; operating frequency 2 V to 6 V per recommended operating conditions."+      },+      {+        "number": "15",+        "name": "A",+        "type": "input",+        "description": "Data input A for parallel load of counter bit 0 (least significant bit); active when LOAD is low, allowing the data to be transferred to output QA asynchronously."+      },+      {+        "number": "16",+        "name": "VCC",+        "type": "power_in",+        "description": "Positive power supply voltage ranging from 2 V to 6 V per recommended operating conditions."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: Pin identification extracted from text layout representation on PAGE 1 showing pin numbers paired wi"+        ],+        "pages_sent": 22,+        "cost_usd": 0.2343,+        "at": "2026-09-26T21:50:13"+      },+      "datasheet": {+        "url": "https://www.ti.com/lit/ds/symlink/sn74hc191.pdf",+        "pages": 22,+        "sha256": "ca8f1cf1eb9fc572",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 16,+        "described": 16,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file