← Commit history

Initial commit: component/sn74hc151pwr

Ray ·26f23f17da ·
2 files changed +258
README.mdadded+52
@@ -0,0 +1,52 @@+# SN74HC151PWR++**Texas Instruments** · Signal Switches, Multiplexers, Decoders · TSSOP-16++SN74HC151PWR from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | D3 | input | Data input 3, selected when C B A = L H H; unused inputs must be held at VCC or GND. |+| 2 | D2 | input | Data input 2, selected when C B A = L H L; unused inputs must be held at VCC or GND. |+| 3 | D1 | input | Data input 1, selected when C B A = L L H; unused inputs must be held at VCC or GND. |+| 4 | D0 | input | Data input 0, selected when C B A = L L L; unused inputs must be held at VCC or GND. |+| 5 | Y | output | Standard data output that follows the selected D input, forced low when strobe G is high, with ±6 mA drive at 5 V. |+| 6 | W | output | Inverted data output, forced high when strobe G is high. |+| 7 | G | input | Strobe input, active low; must be at a low logic level to enable the data inputs. |+| 8 | GND | power_in | Ground pin. |+| 9 | C | input | Data select input C (most significant select bit) for choosing one of eight data sources. |+| 10 | B | input | Data select input B for choosing one of eight data sources. |+| 11 | A | input | Data select input A (least significant select bit) for choosing one of eight data sources. |+| 12 | D7 | input | Data input 7, selected when C B A = H H H; unused inputs must be held at VCC or GND. |+| 13 | D6 | input | Data input 6, selected when C B A = H H L; unused inputs must be held at VCC or GND. |+| 14 | D5 | input | Data input 5, selected when C B A = H L H; unused inputs must be held at VCC or GND. |+| 15 | D4 | input | Data input 4, selected when C B A = H L L; unused inputs must be held at VCC or GND. |+| 16 | VCC | power_in | Supply voltage pin, 2 V to 6 V recommended, with a 0.1-μF bypass capacitor placed close to the pin. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | TSSOP-16 |+| Category | Logic |+| Pins | 16 |++## CAD (KiCad official)++- Symbol: `SN74HC151PWR`+- Footprint: `Package_SO:TSSOP-16_4.4x5mm_P0.65mm`+- 3D model: TSSOP-16 (KiCad packages3D, STEP)+- 3D model files: `sn74hc151pwr-etched.step` / `sn74hc151pwr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sn74hc151pwr.step` / `sn74hc151pwr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/sn74hc151.pdf) (28 pp, sha256 `14da31ada1c931b3`, retrieved 2026-09-30, tier: manufacturer)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/sn74hc151pwr-datasheet.pdf)
page.jsonadded+206
@@ -0,0 +1,206 @@+{+  "slug": "sn74hc151pwr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Signal Switches, Multiplexers, Decoders, TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "logic",+    "sn74hc151pwr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "sn74hc151pwr.kicad_sym",+    "sn74hc151pwr.kicad_mod",+    "sn74hc151pwr.glb",+    "sn74hc151pwr.step",+    "sn74hc151pwr.lbr",+    "docs/hero.png",+    "docs/sn74hc151pwr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "SN74HC151PWR",+    "manufacturer": "Texas Instruments",+    "package": "TSSOP-16",+    "pin_count": 16,+    "category": "Logic",+    "subcategory": "Signal Switches, Multiplexers, Decoders",+    "datasheet": "https://www.ti.com/lit/ds/symlink/sn74hc151.pdf",+    "parts": {+      "symbol": "sn74hc151pwr.kicad_sym",+      "footprint": "sn74hc151pwr.kicad_mod",+      "model_3d": "sn74hc151pwr-etched.glb",+      "model_3d_plain": "sn74hc151pwr.glb",+      "model_3d_step": "sn74hc151pwr-etched.step",+      "model_3d_step_plain": "sn74hc151pwr.step",+      "lbr": "sn74hc151pwr.lbr"+    },+    "distributor_links": {+      "lcsc": "C2653837",+      "digikey": "296-31785-2-ND",+      "mouser": "595-SN74HC151PWR"+    },+    "distributor_check": {+      "checked_at": "2026-09-30T00:02:02Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "296-31785-2-ND",+        "status": "found",+        "lifecycle": "Active"+      },+      "mouser": {+        "pn": "595-SN74HC151PWR",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "D3",+        "type": "input",+        "description": "Data input 3, selected when C B A = L H H; unused inputs must be held at VCC or GND."+      },+      {+        "number": "2",+        "name": "D2",+        "type": "input",+        "description": "Data input 2, selected when C B A = L H L; unused inputs must be held at VCC or GND."+      },+      {+        "number": "3",+        "name": "D1",+        "type": "input",+        "description": "Data input 1, selected when C B A = L L H; unused inputs must be held at VCC or GND."+      },+      {+        "number": "4",+        "name": "D0",+        "type": "input",+        "description": "Data input 0, selected when C B A = L L L; unused inputs must be held at VCC or GND."+      },+      {+        "number": "5",+        "name": "Y",+        "type": "output",+        "description": "Standard data output that follows the selected D input, forced low when strobe G is high, with ±6 mA drive at 5 V."+      },+      {+        "number": "6",+        "name": "W",+        "type": "output",+        "description": "Inverted data output, forced high when strobe G is high."+      },+      {+        "number": "7",+        "name": "G",+        "type": "input",+        "description": "Strobe input, active low; must be at a low logic level to enable the data inputs."+      },+      {+        "number": "8",+        "name": "GND",+        "type": "power_in",+        "description": "Ground pin."+      },+      {+        "number": "9",+        "name": "C",+        "type": "input",+        "description": "Data select input C (most significant select bit) for choosing one of eight data sources."+      },+      {+        "number": "10",+        "name": "B",+        "type": "input",+        "description": "Data select input B for choosing one of eight data sources."+      },+      {+        "number": "11",+        "name": "A",+        "type": "input",+        "description": "Data select input A (least significant select bit) for choosing one of eight data sources."+      },+      {+        "number": "12",+        "name": "D7",+        "type": "input",+        "description": "Data input 7, selected when C B A = H H H; unused inputs must be held at VCC or GND."+      },+      {+        "number": "13",+        "name": "D6",+        "type": "input",+        "description": "Data input 6, selected when C B A = H H L; unused inputs must be held at VCC or GND."+      },+      {+        "number": "14",+        "name": "D5",+        "type": "input",+        "description": "Data input 5, selected when C B A = H L H; unused inputs must be held at VCC or GND."+      },+      {+        "number": "15",+        "name": "D4",+        "type": "input",+        "description": "Data input 4, selected when C B A = H L L; unused inputs must be held at VCC or GND."+      },+      {+        "number": "16",+        "name": "VCC",+        "type": "power_in",+        "description": "Supply voltage pin, 2 V to 6 V recommended, with a 0.1-μF bypass capacitor placed close to the pin."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.3",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.3",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: The pin configuration diagram on PAGE 3 is formatted in ASCII art that appears corrupted or poorly r"+        ],+        "pages_sent": 28,+        "cost_usd": 0.1682,+        "at": "2026-09-30T00:01:44"+      },+      "datasheet": {+        "url": "https://www.ti.com/lit/ds/symlink/sn74hc151.pdf",+        "pages": 28,+        "sha256": "14da31ada1c931b3",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 16,+        "described": 16,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file