component
SN74AVC16827DGGR
Public Made by Adomby adom
Texas Instruments Buffers, Drivers, Receivers, Transceivers, TSSOP-56(6.1x14). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
Publish 0.1.0
14 files changed
+20872
README.md+92docs/hero.pngdocs/sn74avc16827dggr-datasheet.pdfpackage.json+482page.json+488sn74avc16827dggr-hero.glbsn74avc16827dggr-hero.overlay.json+1316sn74avc16827dggr.glbsn74avc16827dggr.kicad_mod+552sn74avc16827dggr.kicad_sym+237sn74avc16827dggr.lbr+270sn74avc16827dggr.step+17433viewers/footprint.html+1viewers/symbol.html+1README.mdadded+92@@ -0,0 +1,92 @@+# SN74AVC16827DGGR++**Texas Instruments** · Buffers, Drivers, Receivers, Transceivers · TSSOP-56(6.1x14)++SN74AVC16827DGGR from Texas Instruments, in a TSSOP-56(6.1x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | 1OE1 | input | Active-low output enable for the first 10-bit section; with 1OE2 also low, outputs 1Y1-1Y10 are active, and a high level forces them to high impedance. Tie OE to VCC through a pullup resistor to keep outputs high-impedance during power up or power down. |+| 2 | 1Y1 | tri_state | Noninverting 3-state output of channel 1A1; active only when 1OE1 and 1OE2 are both low, otherwise high impedance. |+| 3 | 1Y2 | tri_state | Noninverting 3-state output of channel 1A2; active only when 1OE1 and 1OE2 are both low, otherwise high impedance. |+| 4 | GND | power_in | Ground reference for the device. |+| 5 | 1Y3 | tri_state | Noninverting 3-state output of channel 1A3; active only when 1OE1 and 1OE2 are both low, otherwise high impedance. |+| 6 | 1Y4 | tri_state | Noninverting 3-state output of channel 1A4; active only when 1OE1 and 1OE2 are both low, otherwise high impedance. |+| 7 | VCC | power_in | Supply voltage: operable from 1.2 V to 3.6 V and designed specifically for 1.65 V to 3.6 V operation. |+| 8 | 1Y5 | tri_state | Noninverting 3-state output of channel 1A5; active only when 1OE1 and 1OE2 are both low, otherwise high impedance. |+| 9 | 1Y6 | tri_state | Noninverting 3-state output of channel 1A6; active only when 1OE1 and 1OE2 are both low, otherwise high impedance. |+| 10 | 1Y7 | tri_state | Noninverting 3-state output of channel 1A7; active only when 1OE1 and 1OE2 are both low, otherwise high impedance. |+| 11 | GND | power_in | Ground reference for the device. |+| 12 | 1Y8 | tri_state | Noninverting 3-state output of channel 1A8; active only when 1OE1 and 1OE2 are both low, otherwise high impedance. |+| 13 | 1Y9 | tri_state | Noninverting 3-state output of channel 1A9; active only when 1OE1 and 1OE2 are both low, otherwise high impedance. |+| 14 | 1Y10 | tri_state | Noninverting 3-state output of channel 1A10; active only when 1OE1 and 1OE2 are both low, otherwise high impedance. |+| 15 | 2Y1 | tri_state | Noninverting 3-state output of channel 2A1; active only when 2OE1 and 2OE2 are both low, otherwise high impedance. |+| 16 | 2Y2 | tri_state | Noninverting 3-state output of channel 2A2; active only when 2OE1 and 2OE2 are both low, otherwise high impedance. |+| 17 | 2Y3 | tri_state | Noninverting 3-state output of channel 2A3; active only when 2OE1 and 2OE2 are both low, otherwise high impedance. |+| 18 | GND | power_in | Ground reference for the device. |+| 19 | 2Y4 | tri_state | Noninverting 3-state output of channel 2A4; active only when 2OE1 and 2OE2 are both low, otherwise high impedance. |+| 20 | 2Y5 | tri_state | Noninverting 3-state output of channel 2A5; active only when 2OE1 and 2OE2 are both low, otherwise high impedance. |+| 21 | 2Y6 | tri_state | Noninverting 3-state output of channel 2A6; active only when 2OE1 and 2OE2 are both low, otherwise high impedance. |+| 22 | VCC | power_in | Supply voltage: operable from 1.2 V to 3.6 V and designed specifically for 1.65 V to 3.6 V operation. |+| 23 | 2Y7 | tri_state | Noninverting 3-state output of channel 2A7; active only when 2OE1 and 2OE2 are both low, otherwise high impedance. |+| 24 | 2Y8 | tri_state | Noninverting 3-state output of channel 2A8; active only when 2OE1 and 2OE2 are both low, otherwise high impedance. |+| 25 | GND | power_in | Ground reference for the device. |+| 26 | 2Y9 | tri_state | Noninverting 3-state output of channel 2A9; active only when 2OE1 and 2OE2 are both low, otherwise high impedance. |+| 27 | 2Y10 | tri_state | Noninverting 3-state output of channel 2A10; active only when 2OE1 and 2OE2 are both low, otherwise high impedance. |+| 28 | 2OE1 | input | Active-low output enable for the second 10-bit section; with 2OE2 also low, outputs 2Y1-2Y10 are active, and a high level forces them to high impedance. |+| 29 | 2OE2 | input | Active-low output enable for the second 10-bit section; with 2OE1 also low, outputs 2Y1-2Y10 are active, and a high level forces them to high impedance. |+| 30 | 2A10 | input | Data input of channel 2A10 to the noninverting buffer driver, passed to output 2Y10 when enabled. |+| 31 | 2A9 | input | Data input of channel 2A9 to the noninverting buffer driver, passed to output 2Y9 when enabled. |+| 32 | GND | power_in | Ground reference for the device. |+| 33 | 2A8 | input | Data input of channel 2A8 to the noninverting buffer driver, passed to output 2Y8 when enabled. |+| 34 | 2A7 | input | Data input of channel 2A7 to the noninverting buffer driver, passed to output 2Y7 when enabled. |+| 35 | VCC | power_in | Supply voltage: operable from 1.2 V to 3.6 V and designed specifically for 1.65 V to 3.6 V operation. |+| 36 | 2A6 | input | Data input of channel 2A6 to the noninverting buffer driver, passed to output 2Y6 when enabled. |+| 37 | 2A5 | input | Data input of channel 2A5 to the noninverting buffer driver, passed to output 2Y5 when enabled. |+| 38 | 2A4 | input | Data input of channel 2A4 to the noninverting buffer driver, passed to output 2Y4 when enabled. |+| 39 | GND | power_in | Ground reference for the device. |+| 40 | 2A3 | input | Data input of channel 2A3 to the noninverting buffer driver, passed to output 2Y3 when enabled. |+| 41 | 2A2 | input | Data input of channel 2A2 to the noninverting buffer driver, passed to output 2Y2 when enabled. |+| 42 | 2A1 | input | Data input of channel 2A1 to the noninverting buffer driver, passed to output 2Y1 when enabled. |+| 43 | 1A10 | input | Data input of channel 1A10 to the noninverting buffer driver, passed to output 1Y10 when enabled. |+| 44 | 1A9 | input | Data input of channel 1A9 to the noninverting buffer driver, passed to output 1Y9 when enabled. |+| 45 | 1A8 | input | Data input of channel 1A8 to the noninverting buffer driver, passed to output 1Y8 when enabled. |+| 46 | GND | power_in | Ground reference for the device. |+| 47 | 1A7 | input | Data input of channel 1A7 to the noninverting buffer driver, passed to output 1Y7 when enabled. |+| 48 | 1A6 | input | Data input of channel 1A6 to the noninverting buffer driver, passed to output 1Y6 when enabled. |+| 49 | 1A5 | input | Data input of channel 1A5 to the noninverting buffer driver, passed to output 1Y5 when enabled. |+| 50 | VCC | power_in | Supply voltage: operable from 1.2 V to 3.6 V and designed specifically for 1.65 V to 3.6 V operation. |+| 51 | 1A4 | input | Data input of channel 1A4 to the noninverting buffer driver, passed to output 1Y4 when enabled. |+| 52 | 1A3 | input | Data input of channel 1A3 to the noninverting buffer driver, passed to output 1Y3 when enabled. |+| 53 | GND | power_in | Ground reference for the device. |+| 54 | 1A2 | input | Data input of channel 1A2 to the noninverting buffer driver, passed to output 1Y2 when enabled. |+| 55 | 1A1 | input | Data input of channel 1A1 to the noninverting buffer driver, passed to output 1Y1 when enabled. |+| 56 | 1OE2 | input | Active-low output enable for the first 10-bit section; with 1OE1 also low, outputs 1Y1-1Y10 are active, and a high level forces them to high impedance. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | TSSOP-56(6.1x14) |+| Category | Logic |+| Pins | 56 |++## CAD (KiCad official)++- Symbol: `SN74AVC16827DGGR`+- Footprint: `Package_SO:TSSOP-56_6.1x14mm_P0.5mm`+- 3D model: TSSOP-56(6.1x14) (KiCad packages3D, STEP)+- 3D model files: `sn74avc16827dggr-etched.step` / `sn74avc16827dggr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sn74avc16827dggr.step` / `sn74avc16827dggr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/sn74avc16827) (21 pp, sha256 `2df86698312b9f26`, retrieved 2026-10-10, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/sn74avc16827dggr-datasheet.pdf)
docs/hero.pngadded⋯ 1 unchanged line ⋯
docs/sn74avc16827dggr-datasheet.pdfadded⋯ 1 unchanged line ⋯
package.jsonadded+482@@ -0,0 +1,482 @@+{+ "slug": "sn74avc16827dggr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Buffers, Drivers, Receivers, Transceivers, TSSOP-56(6.1x14). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "logic",+ "sn74avc16827dggr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "sn74avc16827dggr.kicad_sym",+ "sn74avc16827dggr.kicad_mod",+ "sn74avc16827dggr.glb",+ "sn74avc16827dggr.step",+ "sn74avc16827dggr.lbr",+ "docs/hero.png",+ "docs/sn74avc16827dggr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "sn74avc16827dggr-hero.glb",+ "sn74avc16827dggr-hero.overlay.json"+ ],+ "component": {+ "mpn": "SN74AVC16827DGGR",+ "manufacturer": "Texas Instruments",+ "package": "TSSOP-56(6.1x14)",+ "pin_count": 56,+ "category": "Logic",+ "subcategory": "Buffers, Drivers, Receivers, Transceivers",+ "datasheet": "https://www.ti.com/cn/lit/gpn/sn74avc16827",+ "parts": {+ "symbol": "sn74avc16827dggr.kicad_sym",+ "footprint": "sn74avc16827dggr.kicad_mod",+ "model_3d": "sn74avc16827dggr-hero.glb",+ "model_3d_plain": "sn74avc16827dggr.glb",+ "model_3d_step": "sn74avc16827dggr-etched.step",+ "model_3d_step_plain": "sn74avc16827dggr.step",+ "lbr": "sn74avc16827dggr.lbr"+ },+ "distributor_links": {+ "lcsc": "C1513835",+ "digikey": "296-9800-2-ND",+ "mouser": "595-SN74AVC16827DGGR"+ },+ "distributor_check": {+ "checked_at": "2026-10-10T23:29:53Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-9800-2-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-SN74AVC16827DGGR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "1OE1",+ "type": "input",+ "description": "Active-low output enable for the first 10-bit section; with 1OE2 also low, outputs 1Y1-1Y10 are active, and a high level forces them to high impedance. Tie OE to VCC through a pullup resistor to keep outputs high-impedance during power up or power down."+ },+ {+ "number": "2",+ "name": "1Y1",+ "type": "tri_state",+ "description": "Noninverting 3-state output of channel 1A1; active only when 1OE1 and 1OE2 are both low, otherwise high impedance."+ },+ {+ "number": "3",+ "name": "1Y2",+ "type": "tri_state",+ "description": "Noninverting 3-state output of channel 1A2; active only when 1OE1 and 1OE2 are both low, otherwise high impedance."+ },+ {+ "number": "4",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device."+ },+ {+ "number": "5",+ "name": "1Y3",+ "type": "tri_state",+ "description": "Noninverting 3-state output of channel 1A3; active only when 1OE1 and 1OE2 are both low, otherwise high impedance."+ },+ {+ "number": "6",+ "name": "1Y4",+ "type": "tri_state",+ "description": "Noninverting 3-state output of channel 1A4; active only when 1OE1 and 1OE2 are both low, otherwise high impedance."+ },+ {+ "number": "7",+ "name": "VCC",+ "type": "power_in",+ "description": "Supply voltage: operable from 1.2 V to 3.6 V and designed specifically for 1.65 V to 3.6 V operation."+ },+ {+ "number": "8",+ "name": "1Y5",+ "type": "tri_state",+ "description": "Noninverting 3-state output of channel 1A5; active only when 1OE1 and 1OE2 are both low, otherwise high impedance."+ },+ {+ "number": "9",+ "name": "1Y6",+ "type": "tri_state",+ "description": "Noninverting 3-state output of channel 1A6; active only when 1OE1 and 1OE2 are both low, otherwise high impedance."+ },+ {+ "number": "10",+ "name": "1Y7",+ "type": "tri_state",+ "description": "Noninverting 3-state output of channel 1A7; active only when 1OE1 and 1OE2 are both low, otherwise high impedance."+ },+ {+ "number": "11",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device."+ },+ {+ "number": "12",+ "name": "1Y8",+ "type": "tri_state",+ "description": "Noninverting 3-state output of channel 1A8; active only when 1OE1 and 1OE2 are both low, otherwise high impedance."+ },+ {+ "number": "13",+ "name": "1Y9",+ "type": "tri_state",+ "description": "Noninverting 3-state output of channel 1A9; active only when 1OE1 and 1OE2 are both low, otherwise high impedance."+ },+ {+ "number": "14",+ "name": "1Y10",+ "type": "tri_state",+ "description": "Noninverting 3-state output of channel 1A10; active only when 1OE1 and 1OE2 are both low, otherwise high impedance."+ },+ {+ "number": "15",+ "name": "2Y1",+ "type": "tri_state",+ "description": "Noninverting 3-state output of channel 2A1; active only when 2OE1 and 2OE2 are both low, otherwise high impedance."+ },+ {+ "number": "16",+ "name": "2Y2",+ "type": "tri_state",+ "description": "Noninverting 3-state output of channel 2A2; active only when 2OE1 and 2OE2 are both low, otherwise high impedance."+ },+ {+ "number": "17",+ "name": "2Y3",+ "type": "tri_state",+ "description": "Noninverting 3-state output of channel 2A3; active only when 2OE1 and 2OE2 are both low, otherwise high impedance."+ },+ {+ "number": "18",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device."+ },+ {+ "number": "19",+ "name": "2Y4",+ "type": "tri_state",+ "description": "Noninverting 3-state output of channel 2A4; active only when 2OE1 and 2OE2 are both low, otherwise high impedance."+ },+ {+ "number": "20",+ "name": "2Y5",+ "type": "tri_state",+ "description": "Noninverting 3-state output of channel 2A5; active only when 2OE1 and 2OE2 are both low, otherwise high impedance."+ },+ {+ "number": "21",+ "name": "2Y6",+ "type": "tri_state",+ "description": "Noninverting 3-state output of channel 2A6; active only when 2OE1 and 2OE2 are both low, otherwise high impedance."+ },+ {+ "number": "22",+ "name": "VCC",+ "type": "power_in",+ "description": "Supply voltage: operable from 1.2 V to 3.6 V and designed specifically for 1.65 V to 3.6 V operation."+ },+ {+ "number": "23",+ "name": "2Y7",+ "type": "tri_state",+ "description": "Noninverting 3-state output of channel 2A7; active only when 2OE1 and 2OE2 are both low, otherwise high impedance."+ },+ {+ "number": "24",+ "name": "2Y8",+ "type": "tri_state",+ "description": "Noninverting 3-state output of channel 2A8; active only when 2OE1 and 2OE2 are both low, otherwise high impedance."+ },+ {+ "number": "25",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device."+ },+ {+ "number": "26",+ "name": "2Y9",+ "type": "tri_state",+ "description": "Noninverting 3-state output of channel 2A9; active only when 2OE1 and 2OE2 are both low, otherwise high impedance."+ },+ {+ "number": "27",+ "name": "2Y10",+ "type": "tri_state",+ "description": "Noninverting 3-state output of channel 2A10; active only when 2OE1 and 2OE2 are both low, otherwise high impedance."+ },+ {+ "number": "28",+ "name": "2OE1",+ "type": "input",+ "description": "Active-low output enable for the second 10-bit section; with 2OE2 also low, outputs 2Y1-2Y10 are active, and a high level forces them to high impedance."+ },+ {+ "number": "29",+ "name": "2OE2",+ "type": "input",+ "description": "Active-low output enable for the second 10-bit section; with 2OE1 also low, outputs 2Y1-2Y10 are active, and a high level forces them to high impedance."+ },+ {+ "number": "30",+ "name": "2A10",+ "type": "input",+ "description": "Data input of channel 2A10 to the noninverting buffer driver, passed to output 2Y10 when enabled."+ },+ {+ "number": "31",+ "name": "2A9",+ "type": "input",+ "description": "Data input of channel 2A9 to the noninverting buffer driver, passed to output 2Y9 when enabled."+ },+ {+ "number": "32",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device."+ },+ {+ "number": "33",+ "name": "2A8",+ "type": "input",+ "description": "Data input of channel 2A8 to the noninverting buffer driver, passed to output 2Y8 when enabled."+ },+ {+ "number": "34",+ "name": "2A7",+ "type": "input",+ "description": "Data input of channel 2A7 to the noninverting buffer driver, passed to output 2Y7 when enabled."+ },+ {+ "number": "35",+ "name": "VCC",+ "type": "power_in",+ "description": "Supply voltage: operable from 1.2 V to 3.6 V and designed specifically for 1.65 V to 3.6 V operation."+ },+ {+ "number": "36",+ "name": "2A6",+ "type": "input",+ "description": "Data input of channel 2A6 to the noninverting buffer driver, passed to output 2Y6 when enabled."+ },+ {+ "number": "37",+ "name": "2A5",+ "type": "input",+ "description": "Data input of channel 2A5 to the noninverting buffer driver, passed to output 2Y5 when enabled."+ },+ {+ "number": "38",+ "name": "2A4",+ "type": "input",+ "description": "Data input of channel 2A4 to the noninverting buffer driver, passed to output 2Y4 when enabled."+ },+ {+ "number": "39",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device."+ },+ {+ "number": "40",+ "name": "2A3",+ "type": "input",+ "description": "Data input of channel 2A3 to the noninverting buffer driver, passed to output 2Y3 when enabled."+ },+ {+ "number": "41",+ "name": "2A2",+ "type": "input",+ "description": "Data input of channel 2A2 to the noninverting buffer driver, passed to output 2Y2 when enabled."+ },+ {+ "number": "42",+ "name": "2A1",+ "type": "input",+ "description": "Data input of channel 2A1 to the noninverting buffer driver, passed to output 2Y1 when enabled."+ },+ {+ "number": "43",+ "name": "1A10",+ "type": "input",+ "description": "Data input of channel 1A10 to the noninverting buffer driver, passed to output 1Y10 when enabled."+ },+ {+ "number": "44",+ "name": "1A9",+ "type": "input",+ "description": "Data input of channel 1A9 to the noninverting buffer driver, passed to output 1Y9 when enabled."+ },+ {+ "number": "45",+ "name": "1A8",+ "type": "input",+ "description": "Data input of channel 1A8 to the noninverting buffer driver, passed to output 1Y8 when enabled."+ },+ {+ "number": "46",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device."+ },+ {+ "number": "47",+ "name": "1A7",+ "type": "input",+ "description": "Data input of channel 1A7 to the noninverting buffer driver, passed to output 1Y7 when enabled."+ },+ {+ "number": "48",+ "name": "1A6",+ "type": "input",+ "description": "Data input of channel 1A6 to the noninverting buffer driver, passed to output 1Y6 when enabled."+ },+ {+ "number": "49",+ "name": "1A5",+ "type": "input",+ "description": "Data input of channel 1A5 to the noninverting buffer driver, passed to output 1Y5 when enabled."+ },+ {+ "number": "50",+ "name": "VCC",+ "type": "power_in",+ "description": "Supply voltage: operable from 1.2 V to 3.6 V and designed specifically for 1.65 V to 3.6 V operation."+ },+ {+ "number": "51",+ "name": "1A4",+ "type": "input",+ "description": "Data input of channel 1A4 to the noninverting buffer driver, passed to output 1Y4 when enabled."+ },+ {+ "number": "52",+ "name": "1A3",+ "type": "input",+ "description": "Data input of channel 1A3 to the noninverting buffer driver, passed to output 1Y3 when enabled."+ },+ {+ "number": "53",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device."+ },+ {+ "number": "54",+ "name": "1A2",+ "type": "input",+ "description": "Data input of channel 1A2 to the noninverting buffer driver, passed to output 1Y2 when enabled."+ },+ {+ "number": "55",+ "name": "1A1",+ "type": "input",+ "description": "Data input of channel 1A1 to the noninverting buffer driver, passed to output 1Y1 when enabled."+ },+ {+ "number": "56",+ "name": "1OE2",+ "type": "input",+ "description": "Active-low output enable for the first 10-bit section; with 1OE1 also low, outputs 1Y1-1Y10 are active, and a high level forces them to high impedance."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The terminal-assignment table is text-extracted, so the pin-number-to-name mapping was reconstructed; The DGG (TSSOP-56) and DGV (TVSOP-56) packages share one terminal assignment on page 2, so this pino"+ ],+ "pages_sent": 21,+ "cost_usd": 0.115,+ "at": "2026-10-10T23:29:28"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/sn74avc16827",+ "pages": 21,+ "sha256": "2df86698312b9f26",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 56,+ "described": 56,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "sn74avc16827dggr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 8.1,+ 14.0,+ 1.05+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "08865a2fbb8eeb77175ee9f142024957eb3cd68f52d46f1ca8c9eb5f0600cc20",+ "checked": "2026-10-10",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "sn74avc16827dggr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 8.1,+ 14.0,+ 1.05+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "19ee0698d3a0dc1f3c5cd8fc871681b0cd58e1d6503fe2a4a4f27394bfca90c0",+ "checked": "2026-10-10",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ }+}
page.jsonadded+488@@ -0,0 +1,488 @@+{+ "slug": "sn74avc16827dggr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Buffers, Drivers, Receivers, Transceivers, TSSOP-56(6.1x14). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "logic",+ "sn74avc16827dggr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "sn74avc16827dggr.kicad_sym",+ "sn74avc16827dggr.kicad_mod",+ "sn74avc16827dggr.glb",+ "sn74avc16827dggr.step",+ "sn74avc16827dggr.lbr",+ "docs/hero.png",+ "docs/sn74avc16827dggr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "sn74avc16827dggr-hero.glb",+ "sn74avc16827dggr-hero.overlay.json"+ ],+ "component": {+ "mpn": "SN74AVC16827DGGR",+ "manufacturer": "Texas Instruments",+ "package": "TSSOP-56(6.1x14)",+ "pin_count": 56,+ "category": "Logic",+ "subcategory": "Buffers, Drivers, Receivers, Transceivers",+ "datasheet": "https://www.ti.com/cn/lit/gpn/sn74avc16827",+ "parts": {+ "symbol": "sn74avc16827dggr.kicad_sym",+ "footprint": "sn74avc16827dggr.kicad_mod",+ "model_3d": "sn74avc16827dggr-hero.glb",+ "model_3d_plain": "sn74avc16827dggr.glb",+ "model_3d_step": "sn74avc16827dggr-etched.step",+ "model_3d_step_plain": "sn74avc16827dggr.step",+ "lbr": "sn74avc16827dggr.lbr"+ },+ "distributor_links": {+ "lcsc": "C1513835",+ "digikey": "296-9800-2-ND",+ "mouser": "595-SN74AVC16827DGGR"+ },+ "distributor_check": {+ "checked_at": "2026-10-10T23:29:53Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-9800-2-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-SN74AVC16827DGGR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "1OE1",+ "type": "input",+ "description": "Active-low output enable for the first 10-bit section; with 1OE2 also low, outputs 1Y1-1Y10 are active, and a high level forces them to high impedance. Tie OE to VCC through a pullup resistor to keep outputs high-impedance during power up or power down."+ },+ {+ "number": "2",+ "name": "1Y1",+ "type": "tri_state",+ "description": "Noninverting 3-state output of channel 1A1; active only when 1OE1 and 1OE2 are both low, otherwise high impedance."+ },+ {+ "number": "3",+ "name": "1Y2",+ "type": "tri_state",+ "description": "Noninverting 3-state output of channel 1A2; active only when 1OE1 and 1OE2 are both low, otherwise high impedance."+ },+ {+ "number": "4",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device."+ },+ {+ "number": "5",+ "name": "1Y3",+ "type": "tri_state",+ "description": "Noninverting 3-state output of channel 1A3; active only when 1OE1 and 1OE2 are both low, otherwise high impedance."+ },+ {+ "number": "6",+ "name": "1Y4",+ "type": "tri_state",+ "description": "Noninverting 3-state output of channel 1A4; active only when 1OE1 and 1OE2 are both low, otherwise high impedance."+ },+ {+ "number": "7",+ "name": "VCC",+ "type": "power_in",+ "description": "Supply voltage: operable from 1.2 V to 3.6 V and designed specifically for 1.65 V to 3.6 V operation."+ },+ {+ "number": "8",+ "name": "1Y5",+ "type": "tri_state",+ "description": "Noninverting 3-state output of channel 1A5; active only when 1OE1 and 1OE2 are both low, otherwise high impedance."+ },+ {+ "number": "9",+ "name": "1Y6",+ "type": "tri_state",+ "description": "Noninverting 3-state output of channel 1A6; active only when 1OE1 and 1OE2 are both low, otherwise high impedance."+ },+ {+ "number": "10",+ "name": "1Y7",+ "type": "tri_state",+ "description": "Noninverting 3-state output of channel 1A7; active only when 1OE1 and 1OE2 are both low, otherwise high impedance."+ },+ {+ "number": "11",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device."+ },+ {+ "number": "12",+ "name": "1Y8",+ "type": "tri_state",+ "description": "Noninverting 3-state output of channel 1A8; active only when 1OE1 and 1OE2 are both low, otherwise high impedance."+ },+ {+ "number": "13",+ "name": "1Y9",+ "type": "tri_state",+ "description": "Noninverting 3-state output of channel 1A9; active only when 1OE1 and 1OE2 are both low, otherwise high impedance."+ },+ {+ "number": "14",+ "name": "1Y10",+ "type": "tri_state",+ "description": "Noninverting 3-state output of channel 1A10; active only when 1OE1 and 1OE2 are both low, otherwise high impedance."+ },+ {+ "number": "15",+ "name": "2Y1",+ "type": "tri_state",+ "description": "Noninverting 3-state output of channel 2A1; active only when 2OE1 and 2OE2 are both low, otherwise high impedance."+ },+ {+ "number": "16",+ "name": "2Y2",+ "type": "tri_state",+ "description": "Noninverting 3-state output of channel 2A2; active only when 2OE1 and 2OE2 are both low, otherwise high impedance."+ },+ {+ "number": "17",+ "name": "2Y3",+ "type": "tri_state",+ "description": "Noninverting 3-state output of channel 2A3; active only when 2OE1 and 2OE2 are both low, otherwise high impedance."+ },+ {+ "number": "18",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device."+ },+ {+ "number": "19",+ "name": "2Y4",+ "type": "tri_state",+ "description": "Noninverting 3-state output of channel 2A4; active only when 2OE1 and 2OE2 are both low, otherwise high impedance."+ },+ {+ "number": "20",+ "name": "2Y5",+ "type": "tri_state",+ "description": "Noninverting 3-state output of channel 2A5; active only when 2OE1 and 2OE2 are both low, otherwise high impedance."+ },+ {+ "number": "21",+ "name": "2Y6",+ "type": "tri_state",+ "description": "Noninverting 3-state output of channel 2A6; active only when 2OE1 and 2OE2 are both low, otherwise high impedance."+ },+ {+ "number": "22",+ "name": "VCC",+ "type": "power_in",+ "description": "Supply voltage: operable from 1.2 V to 3.6 V and designed specifically for 1.65 V to 3.6 V operation."+ },+ {+ "number": "23",+ "name": "2Y7",+ "type": "tri_state",+ "description": "Noninverting 3-state output of channel 2A7; active only when 2OE1 and 2OE2 are both low, otherwise high impedance."+ },+ {+ "number": "24",+ "name": "2Y8",+ "type": "tri_state",+ "description": "Noninverting 3-state output of channel 2A8; active only when 2OE1 and 2OE2 are both low, otherwise high impedance."+ },+ {+ "number": "25",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device."+ },+ {+ "number": "26",+ "name": "2Y9",+ "type": "tri_state",+ "description": "Noninverting 3-state output of channel 2A9; active only when 2OE1 and 2OE2 are both low, otherwise high impedance."+ },+ {+ "number": "27",+ "name": "2Y10",+ "type": "tri_state",+ "description": "Noninverting 3-state output of channel 2A10; active only when 2OE1 and 2OE2 are both low, otherwise high impedance."+ },+ {+ "number": "28",+ "name": "2OE1",+ "type": "input",+ "description": "Active-low output enable for the second 10-bit section; with 2OE2 also low, outputs 2Y1-2Y10 are active, and a high level forces them to high impedance."+ },+ {+ "number": "29",+ "name": "2OE2",+ "type": "input",+ "description": "Active-low output enable for the second 10-bit section; with 2OE1 also low, outputs 2Y1-2Y10 are active, and a high level forces them to high impedance."+ },+ {+ "number": "30",+ "name": "2A10",+ "type": "input",+ "description": "Data input of channel 2A10 to the noninverting buffer driver, passed to output 2Y10 when enabled."+ },+ {+ "number": "31",+ "name": "2A9",+ "type": "input",+ "description": "Data input of channel 2A9 to the noninverting buffer driver, passed to output 2Y9 when enabled."+ },+ {+ "number": "32",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device."+ },+ {+ "number": "33",+ "name": "2A8",+ "type": "input",+ "description": "Data input of channel 2A8 to the noninverting buffer driver, passed to output 2Y8 when enabled."+ },+ {+ "number": "34",+ "name": "2A7",+ "type": "input",+ "description": "Data input of channel 2A7 to the noninverting buffer driver, passed to output 2Y7 when enabled."+ },+ {+ "number": "35",+ "name": "VCC",+ "type": "power_in",+ "description": "Supply voltage: operable from 1.2 V to 3.6 V and designed specifically for 1.65 V to 3.6 V operation."+ },+ {+ "number": "36",+ "name": "2A6",+ "type": "input",+ "description": "Data input of channel 2A6 to the noninverting buffer driver, passed to output 2Y6 when enabled."+ },+ {+ "number": "37",+ "name": "2A5",+ "type": "input",+ "description": "Data input of channel 2A5 to the noninverting buffer driver, passed to output 2Y5 when enabled."+ },+ {+ "number": "38",+ "name": "2A4",+ "type": "input",+ "description": "Data input of channel 2A4 to the noninverting buffer driver, passed to output 2Y4 when enabled."+ },+ {+ "number": "39",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device."+ },+ {+ "number": "40",+ "name": "2A3",+ "type": "input",+ "description": "Data input of channel 2A3 to the noninverting buffer driver, passed to output 2Y3 when enabled."+ },+ {+ "number": "41",+ "name": "2A2",+ "type": "input",+ "description": "Data input of channel 2A2 to the noninverting buffer driver, passed to output 2Y2 when enabled."+ },+ {+ "number": "42",+ "name": "2A1",+ "type": "input",+ "description": "Data input of channel 2A1 to the noninverting buffer driver, passed to output 2Y1 when enabled."+ },+ {+ "number": "43",+ "name": "1A10",+ "type": "input",+ "description": "Data input of channel 1A10 to the noninverting buffer driver, passed to output 1Y10 when enabled."+ },+ {+ "number": "44",+ "name": "1A9",+ "type": "input",+ "description": "Data input of channel 1A9 to the noninverting buffer driver, passed to output 1Y9 when enabled."+ },+ {+ "number": "45",+ "name": "1A8",+ "type": "input",+ "description": "Data input of channel 1A8 to the noninverting buffer driver, passed to output 1Y8 when enabled."+ },+ {+ "number": "46",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device."+ },+ {+ "number": "47",+ "name": "1A7",+ "type": "input",+ "description": "Data input of channel 1A7 to the noninverting buffer driver, passed to output 1Y7 when enabled."+ },+ {+ "number": "48",+ "name": "1A6",+ "type": "input",+ "description": "Data input of channel 1A6 to the noninverting buffer driver, passed to output 1Y6 when enabled."+ },+ {+ "number": "49",+ "name": "1A5",+ "type": "input",+ "description": "Data input of channel 1A5 to the noninverting buffer driver, passed to output 1Y5 when enabled."+ },+ {+ "number": "50",+ "name": "VCC",+ "type": "power_in",+ "description": "Supply voltage: operable from 1.2 V to 3.6 V and designed specifically for 1.65 V to 3.6 V operation."+ },+ {+ "number": "51",+ "name": "1A4",+ "type": "input",+ "description": "Data input of channel 1A4 to the noninverting buffer driver, passed to output 1Y4 when enabled."+ },+ {+ "number": "52",+ "name": "1A3",+ "type": "input",+ "description": "Data input of channel 1A3 to the noninverting buffer driver, passed to output 1Y3 when enabled."+ },+ {+ "number": "53",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device."+ },+ {+ "number": "54",+ "name": "1A2",+ "type": "input",+ "description": "Data input of channel 1A2 to the noninverting buffer driver, passed to output 1Y2 when enabled."+ },+ {+ "number": "55",+ "name": "1A1",+ "type": "input",+ "description": "Data input of channel 1A1 to the noninverting buffer driver, passed to output 1Y1 when enabled."+ },+ {+ "number": "56",+ "name": "1OE2",+ "type": "input",+ "description": "Active-low output enable for the first 10-bit section; with 1OE1 also low, outputs 1Y1-1Y10 are active, and a high level forces them to high impedance."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The terminal-assignment table is text-extracted, so the pin-number-to-name mapping was reconstructed; The DGG (TSSOP-56) and DGV (TVSOP-56) packages share one terminal assignment on page 2, so this pino"+ ],+ "pages_sent": 21,+ "cost_usd": 0.115,+ "at": "2026-10-10T23:29:28"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/sn74avc16827",+ "pages": 21,+ "sha256": "2df86698312b9f26",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 56,+ "described": 56,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "sn74avc16827dggr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 8.1,+ 14,+ 1.05+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "08865a2fbb8eeb77175ee9f142024957eb3cd68f52d46f1ca8c9eb5f0600cc20",+ "checked": "2026-10-10",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "sn74avc16827dggr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 8.1,+ 14,+ 1.05+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "19ee0698d3a0dc1f3c5cd8fc871681b0cd58e1d6503fe2a4a4f27394bfca90c0",+ "checked": "2026-10-10",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}
sn74avc16827dggr-hero.glbadded⋯ 1 unchanged line ⋯
sn74avc16827dggr-hero.overlay.jsonadded+1316@@ -0,0 +1,1316 @@+{+ "spec": "adom-hero 1.4",+ "mpn": "SN74AVC16827DGGR",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 56,+ "span_mm": 13.8,+ "dash_mm": 0.345,+ "gap_mm": 0.207,+ "pad_stroke_mm": 0.0828+ },+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 3,+ "pin1": {+ "source": "footprint silkscreen",+ "pad": "1"+ }+ },+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 56,+ "sides": "top + mirrored underside (single-sided)",+ "fallback_to_pad_number": 0+ }+ },+ "align": {+ "ok": true,+ "centre_offset_mm": 0.0,+ "tolerance_mm": 1.104,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -4.05,+ 4.05,+ -6.86,+ 6.86+ ],+ "pads_bbox_mm": [+ -4.45,+ 4.45,+ -6.9,+ 6.9+ ],+ "seating_z_mm": 0.0+ },+ "sources": {+ "glb": "sn74avc16827dggr.glb",+ "glb_sha256": "2a38b446b43c2668079f457c3ffc8779a08b1f38634bbaf3b3a3a9464dcc6bf4",+ "footprint": "sn74avc16827dggr.kicad_mod",+ "footprint_sha256": "4837122e761e8c4750f29636d09aaca5a3fb7f83b24e3f08c3a5ca8a121e52de",+ "pins": "page.json component.pins",+ "pins_sha256": "b0f1b8c9f4340221bf44a3fed1bc7f2fd4a4cc2d7a20d80e07d92be7483d6a14"+ },+ "generator": "adom-wiki 1.7.69 (component_hero)",+ "labels": [+ {+ "pad": "1",+ "text": "1OE1",+ "x": -5.14,+ "y": -6.75,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "2",+ "text": "1Y1",+ "x": -4.55,+ "y": -6.25,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "3",+ "text": "1Y2",+ "x": -4.55,+ "y": -5.75,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "4",+ "text": "GND",+ "x": -4.55,+ "y": -5.25,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "5",+ "text": "1Y3",+ "x": -4.55,+ "y": -4.75,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "6",+ "text": "1Y4",+ "x": -4.55,+ "y": -4.25,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "7",+ "text": "VCC",+ "x": -4.55,+ "y": -3.75,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "8",+ "text": "1Y5",+ "x": -4.55,+ "y": -3.25,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "9",+ "text": "1Y6",+ "x": -4.55,+ "y": -2.75,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "10",+ "text": "1Y7",+ "x": -4.55,+ "y": -2.25,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "11",+ "text": "GND",+ "x": -4.55,+ "y": -1.75,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "12",+ "text": "1Y8",+ "x": -4.55,+ "y": -1.25,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "13",+ "text": "1Y9",+ "x": -4.55,+ "y": -0.75,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "14",+ "text": "1Y10",+ "x": -4.55,+ "y": -0.25,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "15",+ "text": "2Y1",+ "x": -4.55,+ "y": 0.25,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "16",+ "text": "2Y2",+ "x": -4.55,+ "y": 0.75,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "17",+ "text": "2Y3",+ "x": -4.55,+ "y": 1.25,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "18",+ "text": "GND",+ "x": -4.55,+ "y": 1.75,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "19",+ "text": "2Y4",+ "x": -4.55,+ "y": 2.25,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "20",+ "text": "2Y5",+ "x": -4.55,+ "y": 2.75,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "21",+ "text": "2Y6",+ "x": -4.55,+ "y": 3.25,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "22",+ "text": "VCC",+ "x": -4.55,+ "y": 3.75,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "23",+ "text": "2Y7",+ "x": -4.55,+ "y": 4.25,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "24",+ "text": "2Y8",+ "x": -4.55,+ "y": 4.75,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "25",+ "text": "GND",+ "x": -4.55,+ "y": 5.25,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "26",+ "text": "2Y9",+ "x": -4.55,+ "y": 5.75,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "27",+ "text": "2Y10",+ "x": -4.55,+ "y": 6.25,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "28",+ "text": "2OE1",+ "x": -4.55,+ "y": 6.75,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "29",+ "text": "2OE2",+ "x": 4.55,+ "y": 6.75,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "30",+ "text": "2A10",+ "x": 4.55,+ "y": 6.25,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "31",+ "text": "2A9",+ "x": 4.55,+ "y": 5.75,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "32",+ "text": "GND",+ "x": 4.55,+ "y": 5.25,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "33",+ "text": "2A8",+ "x": 4.55,+ "y": 4.75,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "34",+ "text": "2A7",+ "x": 4.55,+ "y": 4.25,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "35",+ "text": "VCC",+ "x": 4.55,+ "y": 3.75,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "36",+ "text": "2A6",+ "x": 4.55,+ "y": 3.25,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "37",+ "text": "2A5",+ "x": 4.55,+ "y": 2.75,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "38",+ "text": "2A4",+ "x": 4.55,+ "y": 2.25,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "39",+ "text": "GND",+ "x": 4.55,+ "y": 1.75,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "40",+ "text": "2A3",+ "x": 4.55,+ "y": 1.25,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "41",+ "text": "2A2",+ "x": 4.55,+ "y": 0.75,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "42",+ "text": "2A1",+ "x": 4.55,+ "y": 0.25,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "43",+ "text": "1A10",+ "x": 4.55,+ "y": -0.25,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "44",+ "text": "1A9",+ "x": 4.55,+ "y": -0.75,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "45",+ "text": "1A8",+ "x": 4.55,+ "y": -1.25,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "46",+ "text": "GND",+ "x": 4.55,+ "y": -1.75,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "47",+ "text": "1A7",+ "x": 4.55,+ "y": -2.25,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "48",+ "text": "1A6",+ "x": 4.55,+ "y": -2.75,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "49",+ "text": "1A5",+ "x": 4.55,+ "y": -3.25,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "50",+ "text": "VCC",+ "x": 4.55,+ "y": -3.75,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "51",+ "text": "1A4",+ "x": 4.55,+ "y": -4.25,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "52",+ "text": "1A3",+ "x": 4.55,+ "y": -4.75,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "53",+ "text": "GND",+ "x": 4.55,+ "y": -5.25,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "54",+ "text": "1A2",+ "x": 4.55,+ "y": -5.75,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "55",+ "text": "1A1",+ "x": 4.55,+ "y": -6.25,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "56",+ "text": "1OE2",+ "x": 4.55,+ "y": -6.75,+ "align": "left",+ "vertical": false,+ "h": 0.25+ }+ ],+ "pads": [+ {+ "number": "1",+ "shape": "roundrect",+ "center_mm": [+ -3.7125,+ -6.75+ ],+ "size_mm": [+ 1.475,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "roundrect",+ "center_mm": [+ -3.7125,+ -6.25+ ],+ "size_mm": [+ 1.475,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "3",+ "shape": "roundrect",+ "center_mm": [+ -3.7125,+ -5.75+ ],+ "size_mm": [+ 1.475,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "4",+ "shape": "roundrect",+ "center_mm": [+ -3.7125,+ -5.25+ ],+ "size_mm": [+ 1.475,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "5",+ "shape": "roundrect",+ "center_mm": [+ -3.7125,+ -4.75+ ],+ "size_mm": [+ 1.475,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "6",+ "shape": "roundrect",+ "center_mm": [+ -3.7125,+ -4.25+ ],+ "size_mm": [+ 1.475,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "7",+ "shape": "roundrect",+ "center_mm": [+ -3.7125,+ -3.75+ ],+ "size_mm": [+ 1.475,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "8",+ "shape": "roundrect",+ "center_mm": [+ -3.7125,+ -3.25+ ],+ "size_mm": [+ 1.475,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "9",+ "shape": "roundrect",+ "center_mm": [+ -3.7125,+ -2.75+ ],+ "size_mm": [+ 1.475,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "10",+ "shape": "roundrect",+ "center_mm": [+ -3.7125,+ -2.25+ ],+ "size_mm": [+ 1.475,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "11",+ "shape": "roundrect",+ "center_mm": [+ -3.7125,+ -1.75+ ],+ "size_mm": [+ 1.475,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "12",+ "shape": "roundrect",+ "center_mm": [+ -3.7125,+ -1.25+ ],+ "size_mm": [+ 1.475,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "13",+ "shape": "roundrect",+ "center_mm": [+ -3.7125,+ -0.75+ ],+ "size_mm": [+ 1.475,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "14",+ "shape": "roundrect",+ "center_mm": [+ -3.7125,+ -0.25+ ],+ "size_mm": [+ 1.475,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "15",+ "shape": "roundrect",+ "center_mm": [+ -3.7125,+ 0.25+ ],+ "size_mm": [+ 1.475,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "16",+ "shape": "roundrect",+ "center_mm": [+ -3.7125,+ 0.75+ ],+ "size_mm": [+ 1.475,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "17",+ "shape": "roundrect",+ "center_mm": [+ -3.7125,+ 1.25+ ],+ "size_mm": [+ 1.475,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "18",+ "shape": "roundrect",+ "center_mm": [+ -3.7125,+ 1.75+ ],+ "size_mm": [+ 1.475,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "19",+ "shape": "roundrect",+ "center_mm": [+ -3.7125,+ 2.25+ ],+ "size_mm": [+ 1.475,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "20",+ "shape": "roundrect",+ "center_mm": [+ -3.7125,+ 2.75+ ],+ "size_mm": [+ 1.475,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "21",+ "shape": "roundrect",+ "center_mm": [+ -3.7125,+ 3.25+ ],+ "size_mm": [+ 1.475,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "22",+ "shape": "roundrect",+ "center_mm": [+ -3.7125,+ 3.75+ ],+ "size_mm": [+ 1.475,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "23",+ "shape": "roundrect",+ "center_mm": [+ -3.7125,+ 4.25+ ],+ "size_mm": [+ 1.475,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "24",+ "shape": "roundrect",+ "center_mm": [+ -3.7125,+ 4.75+ ],+ "size_mm": [+ 1.475,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "25",+ "shape": "roundrect",+ "center_mm": [+ -3.7125,+ 5.25+ ],+ "size_mm": [+ 1.475,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "26",+ "shape": "roundrect",+ "center_mm": [+ -3.7125,+ 5.75+ ],+ "size_mm": [+ 1.475,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "27",+ "shape": "roundrect",+ "center_mm": [+ -3.7125,+ 6.25+ ],+ "size_mm": [+ 1.475,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "28",+ "shape": "roundrect",+ "center_mm": [+ -3.7125,+ 6.75+ ],+ "size_mm": [+ 1.475,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "29",+ "shape": "roundrect",+ "center_mm": [+ 3.7125,+ 6.75+ ],+ "size_mm": [+ 1.475,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "30",+ "shape": "roundrect",+ "center_mm": [+ 3.7125,+ 6.25+ ],+ "size_mm": [+ 1.475,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "31",+ "shape": "roundrect",+ "center_mm": [+ 3.7125,+ 5.75+ ],+ "size_mm": [+ 1.475,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "32",+ "shape": "roundrect",+ "center_mm": [+ 3.7125,+ 5.25+ ],+ "size_mm": [+ 1.475,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "33",+ "shape": "roundrect",+ "center_mm": [+ 3.7125,+ 4.75+ ],+ "size_mm": [+ 1.475,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "34",+ "shape": "roundrect",+ "center_mm": [+ 3.7125,+ 4.25+ ],+ "size_mm": [+ 1.475,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "35",+ "shape": "roundrect",+ "center_mm": [+ 3.7125,+ 3.75+ ],+ "size_mm": [+ 1.475,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "36",+ "shape": "roundrect",+ "center_mm": [+ 3.7125,+ 3.25+ ],+ "size_mm": [+ 1.475,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "37",+ "shape": "roundrect",+ "center_mm": [+ 3.7125,+ 2.75+ ],+ "size_mm": [+ 1.475,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "38",+ "shape": "roundrect",+ "center_mm": [+ 3.7125,+ 2.25+ ],+ "size_mm": [+ 1.475,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "39",+ "shape": "roundrect",+ "center_mm": [+ 3.7125,+ 1.75+ ],+ "size_mm": [+ 1.475,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "40",+ "shape": "roundrect",+ "center_mm": [+ 3.7125,+ 1.25+ ],+ "size_mm": [+ 1.475,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "41",+ "shape": "roundrect",+ "center_mm": [+ 3.7125,+ 0.75+ ],+ "size_mm": [+ 1.475,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "42",+ "shape": "roundrect",+ "center_mm": [+ 3.7125,+ 0.25+ ],+ "size_mm": [+ 1.475,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "43",+ "shape": "roundrect",+ "center_mm": [+ 3.7125,+ -0.25+ ],+ "size_mm": [+ 1.475,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "44",+ "shape": "roundrect",+ "center_mm": [+ 3.7125,+ -0.75+ ],+ "size_mm": [+ 1.475,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "45",+ "shape": "roundrect",+ "center_mm": [+ 3.7125,+ -1.25+ ],+ "size_mm": [+ 1.475,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "46",+ "shape": "roundrect",+ "center_mm": [+ 3.7125,+ -1.75+ ],+ "size_mm": [+ 1.475,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "47",+ "shape": "roundrect",+ "center_mm": [+ 3.7125,+ -2.25+ ],+ "size_mm": [+ 1.475,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "48",+ "shape": "roundrect",+ "center_mm": [+ 3.7125,+ -2.75+ ],+ "size_mm": [+ 1.475,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "49",+ "shape": "roundrect",+ "center_mm": [+ 3.7125,+ -3.25+ ],+ "size_mm": [+ 1.475,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "50",+ "shape": "roundrect",+ "center_mm": [+ 3.7125,+ -3.75+ ],+ "size_mm": [+ 1.475,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "51",+ "shape": "roundrect",+ "center_mm": [+ 3.7125,+ -4.25+ ],+ "size_mm": [+ 1.475,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "52",+ "shape": "roundrect",+ "center_mm": [+ 3.7125,+ -4.75+ ],+ "size_mm": [+ 1.475,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "53",+ "shape": "roundrect",+ "center_mm": [+ 3.7125,+ -5.25+ ],+ "size_mm": [+ 1.475,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "54",+ "shape": "roundrect",+ "center_mm": [+ 3.7125,+ -5.75+ ],+ "size_mm": [+ 1.475,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "55",+ "shape": "roundrect",+ "center_mm": [+ 3.7125,+ -6.25+ ],+ "size_mm": [+ 1.475,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "56",+ "shape": "roundrect",+ "center_mm": [+ 3.7125,+ -6.75+ ],+ "size_mm": [+ 1.475,+ 0.3+ ],+ "rot": 0.0+ }+ ]+}
sn74avc16827dggr.glbadded⋯ 1 unchanged line ⋯
sn74avc16827dggr.kicad_modadded+552@@ -0,0 +1,552 @@+(footprint "TSSOP-56_6.1x14mm_P0.5mm"+ (version 20260206)+ (generator "kicad-footprint-generator")+ (layer "F.Cu")+ (descr "TSSOP, 56 Pin (JEDEC MO-153 Var EE https://www.jedec.org/document_search?search_api_views_fulltext=MO-153)")+ (tags "TSSOP SO")+ (property "Reference" "REF**"+ (at 0 -7.95 0)+ (layer "F.SilkS")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (property "Value" "TSSOP-56_6.1x14mm_P0.5mm"+ (at 0 7.95 0)+ (layer "F.Fab")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (property "KiLib_Generator" "package/gullwing"+ (at 0 0 0)+ (layer "F.SilkS")+ (hide yes)+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (attr smd)+ (duplicate_pad_numbers_are_jumpers no)+ (fp_line+ (start -3.16 -7.16)+ (end 3.16 -7.16)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_line+ (start 3.16 7.16)+ (end -3.16 7.16)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_poly+ (pts+ (xy -4.71 -6.75)+ (xy -5.04 -6.51)+ (xy -5.04 -6.99)+ )+ (stroke+ (width 0.12)+ (type solid)+ )+ (fill yes)+ (layer "F.SilkS")+ )+ (fp_line+ (start -4.7 -7.15)+ (end -3.3 -7.15)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start -4.7 7.15)+ (end -4.7 -7.15)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start -3.3 -7.25)+ (end 3.3 -7.25)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start -3.3 -7.15)+ (end -3.3 -7.25)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start -3.3 7.15)+ (end -4.7 7.15)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start -3.3 7.25)+ (end -3.3 7.15)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 3.3 -7.25)+ (end 3.3 -7.15)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 3.3 -7.15)+ (end 4.7 -7.15)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 3.3 7.15)+ (end 3.3 7.25)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 3.3 7.25)+ (end -3.3 7.25)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 4.7 -7.15)+ (end 4.7 7.15)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 4.7 7.15)+ (end 3.3 7.15)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_poly+ (pts+ (xy -2.05 -7)+ (xy 3.05 -7)+ (xy 3.05 7)+ (xy -3.05 7)+ (xy -3.05 -6)+ )+ (stroke+ (width 0.1)+ (type solid)+ )+ (fill no)+ (layer "F.Fab")+ )+ (fp_text user "${REFERENCE}"+ (at 0 0 0)+ (layer "F.Fab")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (pad "1" smd roundrect+ (at -3.7125 -6.75)+ (size 1.475 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "2" smd roundrect+ (at -3.7125 -6.25)+ (size 1.475 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "3" smd roundrect+ (at -3.7125 -5.75)+ (size 1.475 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "4" smd roundrect+ (at -3.7125 -5.25)+ (size 1.475 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "5" smd roundrect+ (at -3.7125 -4.75)+ (size 1.475 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "6" smd roundrect+ (at -3.7125 -4.25)+ (size 1.475 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "7" smd roundrect+ (at -3.7125 -3.75)+ (size 1.475 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "8" smd roundrect+ (at -3.7125 -3.25)+ (size 1.475 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "9" smd roundrect+ (at -3.7125 -2.75)+ (size 1.475 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "10" smd roundrect+ (at -3.7125 -2.25)+ (size 1.475 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "11" smd roundrect+ (at -3.7125 -1.75)+ (size 1.475 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "12" smd roundrect+ (at -3.7125 -1.25)+ (size 1.475 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "13" smd roundrect+ (at -3.7125 -0.75)+ (size 1.475 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "14" smd roundrect+ (at -3.7125 -0.25)+ (size 1.475 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "15" smd roundrect+ (at -3.7125 0.25)+ (size 1.475 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "16" smd roundrect+ (at -3.7125 0.75)+ (size 1.475 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "17" smd roundrect+ (at -3.7125 1.25)+ (size 1.475 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "18" smd roundrect+ (at -3.7125 1.75)+ (size 1.475 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "19" smd roundrect+ (at -3.7125 2.25)+ (size 1.475 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "20" smd roundrect+ (at -3.7125 2.75)+ (size 1.475 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "21" smd roundrect+ (at -3.7125 3.25)+ (size 1.475 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "22" smd roundrect+ (at -3.7125 3.75)+ (size 1.475 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "23" smd roundrect+ (at -3.7125 4.25)+ (size 1.475 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "24" smd roundrect+ (at -3.7125 4.75)+ (size 1.475 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "25" smd roundrect+ (at -3.7125 5.25)+ (size 1.475 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "26" smd roundrect+ (at -3.7125 5.75)+ (size 1.475 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "27" smd roundrect+ (at -3.7125 6.25)+ (size 1.475 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "28" smd roundrect+ (at -3.7125 6.75)+ (size 1.475 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "29" smd roundrect+ (at 3.7125 6.75)+ (size 1.475 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "30" smd roundrect+ (at 3.7125 6.25)+ (size 1.475 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "31" smd roundrect+ (at 3.7125 5.75)+ (size 1.475 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "32" smd roundrect+ (at 3.7125 5.25)+ (size 1.475 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "33" smd roundrect+ (at 3.7125 4.75)+ (size 1.475 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "34" smd roundrect+ (at 3.7125 4.25)+ (size 1.475 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "35" smd roundrect+ (at 3.7125 3.75)+ (size 1.475 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "36" smd roundrect+ (at 3.7125 3.25)+ (size 1.475 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "37" smd roundrect+ (at 3.7125 2.75)+ (size 1.475 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "38" smd roundrect+ (at 3.7125 2.25)+ (size 1.475 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "39" smd roundrect+ (at 3.7125 1.75)+ (size 1.475 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "40" smd roundrect+ (at 3.7125 1.25)+ (size 1.475 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "41" smd roundrect+ (at 3.7125 0.75)+ (size 1.475 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "42" smd roundrect+ (at 3.7125 0.25)+ (size 1.475 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "43" smd roundrect+ (at 3.7125 -0.25)+ (size 1.475 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "44" smd roundrect+ (at 3.7125 -0.75)+ (size 1.475 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "45" smd roundrect+ (at 3.7125 -1.25)+ (size 1.475 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "46" smd roundrect+ (at 3.7125 -1.75)+ (size 1.475 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "47" smd roundrect+ (at 3.7125 -2.25)+ (size 1.475 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "48" smd roundrect+ (at 3.7125 -2.75)+ (size 1.475 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "49" smd roundrect+ (at 3.7125 -3.25)+ (size 1.475 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "50" smd roundrect+ (at 3.7125 -3.75)+ (size 1.475 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "51" smd roundrect+ (at 3.7125 -4.25)+ (size 1.475 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "52" smd roundrect+ (at 3.7125 -4.75)+ (size 1.475 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "53" smd roundrect+ (at 3.7125 -5.25)+ (size 1.475 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "54" smd roundrect+ (at 3.7125 -5.75)+ (size 1.475 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "55" smd roundrect+ (at 3.7125 -6.25)+ (size 1.475 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "56" smd roundrect+ (at 3.7125 -6.75)+ (size 1.475 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (embedded_fonts no)+ (model "${KICAD10_3DMODEL_DIR}/Package_SO.3dshapes/TSSOP-56_6.1x14mm_P0.5mm.step"+ (offset+ (xyz 0 0 0)+ )+ (scale+ (xyz 1 1 1)+ )+ (rotate+ (xyz 0 0 0)+ )+ )+)
sn74avc16827dggr.kicad_symadded+237@@ -0,0 +1,237 @@+(kicad_symbol_lib (version 20211014) (generator ds2sf_rect)+ (symbol "SN74AVC16827DGGR" (in_bom yes) (on_board yes)+ (property "Reference" "U" (at 0 38.10 0) (effects (font (size 1.27 1.27))))+ (property "Value" "SN74AVC16827DGGR" (at 0 -40.64 0) (effects (font (size 1.27 1.27))))+ (property "Footprint" "" (at 0 0 0) (effects (font (size 1.27 1.27)) hide))+ (symbol "SN74AVC16827DGGR_0_1"+ (rectangle (start -12.70 35.56) (end 12.70 -38.10)+ (stroke (width 0.254) (type default)) (fill (type background)))+ )+ (symbol "SN74AVC16827DGGR_1_1"+ (pin input line (at -17.78 33.02 0) (length 5.08)+ (name "1OE1" (effects (font (size 1.27 1.27))))+ (number "1" (effects (font (size 1.27 1.27))))+ )+ (pin tri_state line (at -17.78 30.48 0) (length 5.08)+ (name "1Y1" (effects (font (size 1.27 1.27))))+ (number "2" (effects (font (size 1.27 1.27))))+ )+ (pin tri_state line (at -17.78 27.94 0) (length 5.08)+ (name "1Y2" (effects (font (size 1.27 1.27))))+ (number "3" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at -17.78 25.40 0) (length 5.08)+ (name "GND" (effects (font (size 1.27 1.27))))+ (number "4" (effects (font (size 1.27 1.27))))+ )+ (pin tri_state line (at -17.78 22.86 0) (length 5.08)+ (name "1Y3" (effects (font (size 1.27 1.27))))+ (number "5" (effects (font (size 1.27 1.27))))+ )+ (pin tri_state line (at -17.78 20.32 0) (length 5.08)+ (name "1Y4" (effects (font (size 1.27 1.27))))+ (number "6" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at -17.78 17.78 0) (length 5.08)+ (name "VCC" (effects (font (size 1.27 1.27))))+ (number "7" (effects (font (size 1.27 1.27))))+ )+ (pin tri_state line (at -17.78 15.24 0) (length 5.08)+ (name "1Y5" (effects (font (size 1.27 1.27))))+ (number "8" (effects (font (size 1.27 1.27))))+ )+ (pin tri_state line (at -17.78 12.70 0) (length 5.08)+ (name "1Y6" (effects (font (size 1.27 1.27))))+ (number "9" (effects (font (size 1.27 1.27))))+ )+ (pin tri_state line (at -17.78 10.16 0) (length 5.08)+ (name "1Y7" (effects (font (size 1.27 1.27))))+ (number "10" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at -17.78 7.62 0) (length 5.08)+ (name "GND" (effects (font (size 1.27 1.27))))+ (number "11" (effects (font (size 1.27 1.27))))+ )+ (pin tri_state line (at -17.78 5.08 0) (length 5.08)+ (name "1Y8" (effects (font (size 1.27 1.27))))+ (number "12" (effects (font (size 1.27 1.27))))+ )+ (pin tri_state line (at -17.78 2.54 0) (length 5.08)+ (name "1Y9" (effects (font (size 1.27 1.27))))+ (number "13" (effects (font (size 1.27 1.27))))+ )+ (pin tri_state line (at -17.78 0.00 0) (length 5.08)+ (name "1Y10" (effects (font (size 1.27 1.27))))+ (number "14" (effects (font (size 1.27 1.27))))+ )+ (pin tri_state line (at -17.78 -2.54 0) (length 5.08)+ (name "2Y1" (effects (font (size 1.27 1.27))))+ (number "15" (effects (font (size 1.27 1.27))))+ )+ (pin tri_state line (at -17.78 -5.08 0) (length 5.08)+ (name "2Y2" (effects (font (size 1.27 1.27))))+ (number "16" (effects (font (size 1.27 1.27))))+ )+ (pin tri_state line (at -17.78 -7.62 0) (length 5.08)+ (name "2Y3" (effects (font (size 1.27 1.27))))+ (number "17" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at -17.78 -10.16 0) (length 5.08)+ (name "GND" (effects (font (size 1.27 1.27))))+ (number "18" (effects (font (size 1.27 1.27))))+ )+ (pin tri_state line (at -17.78 -12.70 0) (length 5.08)+ (name "2Y4" (effects (font (size 1.27 1.27))))+ (number "19" (effects (font (size 1.27 1.27))))+ )+ (pin tri_state line (at -17.78 -15.24 0) (length 5.08)+ (name "2Y5" (effects (font (size 1.27 1.27))))+ (number "20" (effects (font (size 1.27 1.27))))+ )+ (pin tri_state line (at -17.78 -17.78 0) (length 5.08)+ (name "2Y6" (effects (font (size 1.27 1.27))))+ (number "21" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at -17.78 -20.32 0) (length 5.08)+ (name "VCC" (effects (font (size 1.27 1.27))))+ (number "22" (effects (font (size 1.27 1.27))))+ )+ (pin tri_state line (at -17.78 -22.86 0) (length 5.08)+ (name "2Y7" (effects (font (size 1.27 1.27))))+ (number "23" (effects (font (size 1.27 1.27))))+ )+ (pin tri_state line (at -17.78 -25.40 0) (length 5.08)+ (name "2Y8" (effects (font (size 1.27 1.27))))+ (number "24" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at -17.78 -27.94 0) (length 5.08)+ (name "GND" (effects (font (size 1.27 1.27))))+ (number "25" (effects (font (size 1.27 1.27))))+ )+ (pin tri_state line (at -17.78 -30.48 0) (length 5.08)+ (name "2Y9" (effects (font (size 1.27 1.27))))+ (number "26" (effects (font (size 1.27 1.27))))+ )+ (pin tri_state line (at -17.78 -33.02 0) (length 5.08)+ (name "2Y10" (effects (font (size 1.27 1.27))))+ (number "27" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at -17.78 -35.56 0) (length 5.08)+ (name "2OE1" (effects (font (size 1.27 1.27))))+ (number "28" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 33.02 180) (length 5.08)+ (name "1OE2" (effects (font (size 1.27 1.27))))+ (number "56" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 30.48 180) (length 5.08)+ (name "1A1" (effects (font (size 1.27 1.27))))+ (number "55" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 27.94 180) (length 5.08)+ (name "1A2" (effects (font (size 1.27 1.27))))+ (number "54" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at 17.78 25.40 180) (length 5.08)+ (name "GND" (effects (font (size 1.27 1.27))))+ (number "53" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 22.86 180) (length 5.08)+ (name "1A3" (effects (font (size 1.27 1.27))))+ (number "52" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 20.32 180) (length 5.08)+ (name "1A4" (effects (font (size 1.27 1.27))))+ (number "51" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at 17.78 17.78 180) (length 5.08)+ (name "VCC" (effects (font (size 1.27 1.27))))+ (number "50" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 15.24 180) (length 5.08)+ (name "1A5" (effects (font (size 1.27 1.27))))+ (number "49" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 12.70 180) (length 5.08)+ (name "1A6" (effects (font (size 1.27 1.27))))+ (number "48" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 10.16 180) (length 5.08)+ (name "1A7" (effects (font (size 1.27 1.27))))+ (number "47" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at 17.78 7.62 180) (length 5.08)+ (name "GND" (effects (font (size 1.27 1.27))))+ (number "46" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 5.08 180) (length 5.08)+ (name "1A8" (effects (font (size 1.27 1.27))))+ (number "45" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 2.54 180) (length 5.08)+ (name "1A9" (effects (font (size 1.27 1.27))))+ (number "44" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 0.00 180) (length 5.08)+ (name "1A10" (effects (font (size 1.27 1.27))))+ (number "43" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 -2.54 180) (length 5.08)+ (name "2A1" (effects (font (size 1.27 1.27))))+ (number "42" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 -5.08 180) (length 5.08)+ (name "2A2" (effects (font (size 1.27 1.27))))+ (number "41" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 -7.62 180) (length 5.08)+ (name "2A3" (effects (font (size 1.27 1.27))))+ (number "40" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at 17.78 -10.16 180) (length 5.08)+ (name "GND" (effects (font (size 1.27 1.27))))+ (number "39" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 -12.70 180) (length 5.08)+ (name "2A4" (effects (font (size 1.27 1.27))))+ (number "38" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 -15.24 180) (length 5.08)+ (name "2A5" (effects (font (size 1.27 1.27))))+ (number "37" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 -17.78 180) (length 5.08)+ (name "2A6" (effects (font (size 1.27 1.27))))+ (number "36" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at 17.78 -20.32 180) (length 5.08)+ (name "VCC" (effects (font (size 1.27 1.27))))+ (number "35" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 -22.86 180) (length 5.08)+ (name "2A7" (effects (font (size 1.27 1.27))))+ (number "34" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 -25.40 180) (length 5.08)+ (name "2A8" (effects (font (size 1.27 1.27))))+ (number "33" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at 17.78 -27.94 180) (length 5.08)+ (name "GND" (effects (font (size 1.27 1.27))))+ (number "32" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 -30.48 180) (length 5.08)+ (name "2A9" (effects (font (size 1.27 1.27))))+ (number "31" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 -33.02 180) (length 5.08)+ (name "2A10" (effects (font (size 1.27 1.27))))+ (number "30" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 -35.56 180) (length 5.08)+ (name "2OE2" (effects (font (size 1.27 1.27))))+ (number "29" (effects (font (size 1.27 1.27))))+ )+ )+ )+)
sn74avc16827dggr.lbradded+270@@ -0,0 +1,270 @@+<?xml version="1.0" encoding="utf-8"?>+<!DOCTYPE eagle SYSTEM "eagle.dtd">+<eagle version="9.6.2">+<drawing>+<settings><setting alwaysvectorfont="no"/></settings>+<grid distance="0.1" unitdist="inch" unit="inch" style="lines" multiple="1" display="no" altdistance="0.01" altunitdist="inch" altunit="inch"/>+<layers>+<layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>+<layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>+<layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>+<layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>+<layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>+<layer number="20" name="Dimension" color="15" fill="1" visible="yes" active="yes"/>+<layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="24" name="bOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="25" name="tNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="26" name="bNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="27" name="tValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="28" name="bValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="29" name="tStop" color="7" fill="3" visible="no" active="yes"/>+<layer number="30" name="bStop" color="7" fill="6" visible="no" active="yes"/>+<layer number="31" name="tCream" color="7" fill="4" visible="no" active="yes"/>+<layer number="32" name="bCream" color="7" fill="5" visible="no" active="yes"/>+<layer number="33" name="tFinish" color="6" fill="3" visible="no" active="yes"/>+<layer number="34" name="bFinish" color="6" fill="6" visible="no" active="yes"/>+<layer number="35" name="tGlue" color="7" fill="4" visible="no" active="yes"/>+<layer number="36" name="bGlue" color="7" fill="5" visible="no" active="yes"/>+<layer number="37" name="tTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="38" name="bTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="39" name="tKeepout" color="4" fill="11" visible="no" active="yes"/>+<layer number="40" name="bKeepout" color="1" fill="11" visible="no" active="yes"/>+<layer number="41" name="tRestrict" color="4" fill="10" visible="no" active="yes"/>+<layer number="42" name="bRestrict" color="1" fill="10" visible="no" active="yes"/>+<layer number="43" name="vRestrict" color="2" fill="10" visible="no" active="yes"/>+<layer number="44" name="Drills" color="7" fill="1" visible="no" active="yes"/>+<layer number="45" name="Holes" color="7" fill="1" visible="no" active="yes"/>+<layer number="46" name="Milling" color="3" fill="1" visible="no" active="yes"/>+<layer number="47" name="Measures" color="7" fill="1" visible="no" active="yes"/>+<layer number="48" name="Document" color="7" fill="1" visible="yes" active="yes"/>+<layer number="49" name="Reference" color="7" fill="1" visible="yes" active="yes"/>+<layer number="91" name="Nets" color="2" fill="1" visible="yes" active="yes"/>+<layer number="92" name="Busses" color="1" fill="1" visible="yes" active="yes"/>+<layer number="93" name="Pins" color="2" fill="1" visible="no" active="yes"/>+<layer number="94" name="Symbols" color="4" fill="1" visible="yes" active="yes"/>+<layer number="95" name="Names" color="7" fill="1" visible="yes" active="yes"/>+<layer number="96" name="Values" color="7" fill="1" visible="yes" active="yes"/>+<layer number="97" name="Info" color="7" fill="1" visible="yes" active="yes"/>+<layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/>+</layers>+<library>+<description></description>+<packages>+<package name="TSSOP-56_6.1x14mm_P0.5mm">+ <description>TSSOP-56, 6.1 x 14 mm, 0.5 mm pitch</description>+ <smd name="1" x="-3.7125" y="6.7500" dx="1.4750" dy="0.3000" layer="1" roundness="50"/>+ <smd name="2" x="-3.7125" y="6.2500" dx="1.4750" dy="0.3000" layer="1" roundness="50"/>+ <smd name="3" x="-3.7125" y="5.7500" dx="1.4750" dy="0.3000" layer="1" roundness="50"/>+ <smd name="4" x="-3.7125" y="5.2500" dx="1.4750" dy="0.3000" layer="1" roundness="50"/>+ <smd name="5" x="-3.7125" y="4.7500" dx="1.4750" dy="0.3000" layer="1" roundness="50"/>+ <smd name="6" x="-3.7125" y="4.2500" dx="1.4750" dy="0.3000" layer="1" roundness="50"/>+ <smd name="7" x="-3.7125" y="3.7500" dx="1.4750" dy="0.3000" layer="1" roundness="50"/>+ <smd name="8" x="-3.7125" y="3.2500" dx="1.4750" dy="0.3000" layer="1" roundness="50"/>+ <smd name="9" x="-3.7125" y="2.7500" dx="1.4750" dy="0.3000" layer="1" roundness="50"/>+ <smd name="10" x="-3.7125" y="2.2500" dx="1.4750" dy="0.3000" layer="1" roundness="50"/>+ <smd name="11" x="-3.7125" y="1.7500" dx="1.4750" dy="0.3000" layer="1" roundness="50"/>+ <smd name="12" x="-3.7125" y="1.2500" dx="1.4750" dy="0.3000" layer="1" roundness="50"/>+ <smd name="13" x="-3.7125" y="0.7500" dx="1.4750" dy="0.3000" layer="1" roundness="50"/>+ <smd name="14" x="-3.7125" y="0.2500" dx="1.4750" dy="0.3000" layer="1" roundness="50"/>+ <smd name="15" x="-3.7125" y="-0.2500" dx="1.4750" dy="0.3000" layer="1" roundness="50"/>+ <smd name="16" x="-3.7125" y="-0.7500" dx="1.4750" dy="0.3000" layer="1" roundness="50"/>+ <smd name="17" x="-3.7125" y="-1.2500" dx="1.4750" dy="0.3000" layer="1" roundness="50"/>+ <smd name="18" x="-3.7125" y="-1.7500" dx="1.4750" dy="0.3000" layer="1" roundness="50"/>+ <smd name="19" x="-3.7125" y="-2.2500" dx="1.4750" dy="0.3000" layer="1" roundness="50"/>+ <smd name="20" x="-3.7125" y="-2.7500" dx="1.4750" dy="0.3000" layer="1" roundness="50"/>+ <smd name="21" x="-3.7125" y="-3.2500" dx="1.4750" dy="0.3000" layer="1" roundness="50"/>+ <smd name="22" x="-3.7125" y="-3.7500" dx="1.4750" dy="0.3000" layer="1" roundness="50"/>+ <smd name="23" x="-3.7125" y="-4.2500" dx="1.4750" dy="0.3000" layer="1" roundness="50"/>+ <smd name="24" x="-3.7125" y="-4.7500" dx="1.4750" dy="0.3000" layer="1" roundness="50"/>+ <smd name="25" x="-3.7125" y="-5.2500" dx="1.4750" dy="0.3000" layer="1" roundness="50"/>+ <smd name="26" x="-3.7125" y="-5.7500" dx="1.4750" dy="0.3000" layer="1" roundness="50"/>+ <smd name="27" x="-3.7125" y="-6.2500" dx="1.4750" dy="0.3000" layer="1" roundness="50"/>+ <smd name="28" x="-3.7125" y="-6.7500" dx="1.4750" dy="0.3000" layer="1" roundness="50"/>+ <smd name="29" x="3.7125" y="-6.7500" dx="1.4750" dy="0.3000" layer="1" roundness="50"/>+ <smd name="30" x="3.7125" y="-6.2500" dx="1.4750" dy="0.3000" layer="1" roundness="50"/>+ <smd name="31" x="3.7125" y="-5.7500" dx="1.4750" dy="0.3000" layer="1" roundness="50"/>+ <smd name="32" x="3.7125" y="-5.2500" dx="1.4750" dy="0.3000" layer="1" roundness="50"/>+ <smd name="33" x="3.7125" y="-4.7500" dx="1.4750" dy="0.3000" layer="1" roundness="50"/>+ <smd name="34" x="3.7125" y="-4.2500" dx="1.4750" dy="0.3000" layer="1" roundness="50"/>+ <smd name="35" x="3.7125" y="-3.7500" dx="1.4750" dy="0.3000" layer="1" roundness="50"/>+ <smd name="36" x="3.7125" y="-3.2500" dx="1.4750" dy="0.3000" layer="1" roundness="50"/>+ <smd name="37" x="3.7125" y="-2.7500" dx="1.4750" dy="0.3000" layer="1" roundness="50"/>+ <smd name="38" x="3.7125" y="-2.2500" dx="1.4750" dy="0.3000" layer="1" roundness="50"/>+ <smd name="39" x="3.7125" y="-1.7500" dx="1.4750" dy="0.3000" layer="1" roundness="50"/>+ <smd name="40" x="3.7125" y="-1.2500" dx="1.4750" dy="0.3000" layer="1" roundness="50"/>+ <smd name="41" x="3.7125" y="-0.7500" dx="1.4750" dy="0.3000" layer="1" roundness="50"/>+ <smd name="42" x="3.7125" y="-0.2500" dx="1.4750" dy="0.3000" layer="1" roundness="50"/>+ <smd name="43" x="3.7125" y="0.2500" dx="1.4750" dy="0.3000" layer="1" roundness="50"/>+ <smd name="44" x="3.7125" y="0.7500" dx="1.4750" dy="0.3000" layer="1" roundness="50"/>+ <smd name="45" x="3.7125" y="1.2500" dx="1.4750" dy="0.3000" layer="1" roundness="50"/>+ <smd name="46" x="3.7125" y="1.7500" dx="1.4750" dy="0.3000" layer="1" roundness="50"/>+ <smd name="47" x="3.7125" y="2.2500" dx="1.4750" dy="0.3000" layer="1" roundness="50"/>+ <smd name="48" x="3.7125" y="2.7500" dx="1.4750" dy="0.3000" layer="1" roundness="50"/>+ <smd name="49" x="3.7125" y="3.2500" dx="1.4750" dy="0.3000" layer="1" roundness="50"/>+ <smd name="50" x="3.7125" y="3.7500" dx="1.4750" dy="0.3000" layer="1" roundness="50"/>+ <smd name="51" x="3.7125" y="4.2500" dx="1.4750" dy="0.3000" layer="1" roundness="50"/>+ <smd name="52" x="3.7125" y="4.7500" dx="1.4750" dy="0.3000" layer="1" roundness="50"/>+ <smd name="53" x="3.7125" y="5.2500" dx="1.4750" dy="0.3000" layer="1" roundness="50"/>+ <smd name="54" x="3.7125" y="5.7500" dx="1.4750" dy="0.3000" layer="1" roundness="50"/>+ <smd name="55" x="3.7125" y="6.2500" dx="1.4750" dy="0.3000" layer="1" roundness="50"/>+ <smd name="56" x="3.7125" y="6.7500" dx="1.4750" dy="0.3000" layer="1" roundness="50"/>+ <polygon width="0.1200" layer="21">+ <vertex x="-4.7100" y="6.7500"/>+ <vertex x="-5.0400" y="6.5100"/>+ <vertex x="-5.0400" y="6.9900"/>+ </polygon>+ <polygon width="0.1000" layer="51">+ <vertex x="-2.0500" y="7.0000"/>+ <vertex x="3.0500" y="7.0000"/>+ <vertex x="3.0500" y="-7.0000"/>+ <vertex x="-3.0500" y="-7.0000"/>+ <vertex x="-3.0500" y="6.0000"/>+ </polygon>+ <wire x1="-3.1600" y1="7.1600" x2="3.1600" y2="7.1600" width="0.1200" layer="21"/>+ <wire x1="3.1600" y1="-7.1600" x2="-3.1600" y2="-7.1600" width="0.1200" layer="21"/>+ <text x="0" y="8.088" size="1.27" layer="25" align="bottom-center">>NAME</text>+ <text x="0" y="-8.088" size="1.27" layer="27" align="top-center">>VALUE</text>+</package>+</packages>+<symbols>+<symbol name="SN74AVC16827DGGR">+ <wire x1="-12.7" y1="35.56" x2="12.7" y2="35.56" width="0.254" layer="94"/>+ <wire x1="12.7" y1="35.56" x2="12.7" y2="-38.1" width="0.254" layer="94"/>+ <wire x1="12.7" y1="-38.1" x2="-12.7" y2="-38.1" width="0.254" layer="94"/>+ <wire x1="-12.7" y1="-38.1" x2="-12.7" y2="35.56" width="0.254" layer="94"/>+ <text x="0.0000" y="38.1000" size="1.27" layer="95" align="center">>NAME</text>+ <text x="0.0000" y="-40.6400" size="1.27" layer="96" align="center">>VALUE</text>+ <pin name="1OE1" x="-17.78" y="33.02" length="middle" direction="in"/>+ <pin name="1Y1" x="-17.78" y="30.48" length="middle" direction="hiz"/>+ <pin name="1Y2" x="-17.78" y="27.94" length="middle" direction="hiz"/>+ <pin name="GND" x="-17.78" y="25.4" length="middle" direction="pwr"/>+ <pin name="1Y3" x="-17.78" y="22.86" length="middle" direction="hiz"/>+ <pin name="1Y4" x="-17.78" y="20.32" length="middle" direction="hiz"/>+ <pin name="VCC" x="-17.78" y="17.78" length="middle" direction="pwr"/>+ <pin name="1Y5" x="-17.78" y="15.24" length="middle" direction="hiz"/>+ <pin name="1Y6" x="-17.78" y="12.7" length="middle" direction="hiz"/>+ <pin name="1Y7" x="-17.78" y="10.16" length="middle" direction="hiz"/>+ <pin name="GND@2" x="-17.78" y="7.62" length="middle" direction="pwr"/>+ <pin name="1Y8" x="-17.78" y="5.08" length="middle" direction="hiz"/>+ <pin name="1Y9" x="-17.78" y="2.54" length="middle" direction="hiz"/>+ <pin name="1Y10" x="-17.78" y="0" length="middle" direction="hiz"/>+ <pin name="2Y1" x="-17.78" y="-2.54" length="middle" direction="hiz"/>+ <pin name="2Y2" x="-17.78" y="-5.08" length="middle" direction="hiz"/>+ <pin name="2Y3" x="-17.78" y="-7.62" length="middle" direction="hiz"/>+ <pin name="GND@3" x="-17.78" y="-10.16" length="middle" direction="pwr"/>+ <pin name="2Y4" x="-17.78" y="-12.7" length="middle" direction="hiz"/>+ <pin name="2Y5" x="-17.78" y="-15.24" length="middle" direction="hiz"/>+ <pin name="2Y6" x="-17.78" y="-17.78" length="middle" direction="hiz"/>+ <pin name="VCC@2" x="-17.78" y="-20.32" length="middle" direction="pwr"/>+ <pin name="2Y7" x="-17.78" y="-22.86" length="middle" direction="hiz"/>+ <pin name="2Y8" x="-17.78" y="-25.4" length="middle" direction="hiz"/>+ <pin name="GND@4" x="-17.78" y="-27.94" length="middle" direction="pwr"/>+ <pin name="2Y9" x="-17.78" y="-30.48" length="middle" direction="hiz"/>+ <pin name="2Y10" x="-17.78" y="-33.02" length="middle" direction="hiz"/>+ <pin name="2OE1" x="-17.78" y="-35.56" length="middle" direction="in"/>+ <pin name="1OE2" x="17.78" y="33.02" length="middle" direction="in" rot="R180"/>+ <pin name="1A1" x="17.78" y="30.48" length="middle" direction="in" rot="R180"/>+ <pin name="1A2" x="17.78" y="27.94" length="middle" direction="in" rot="R180"/>+ <pin name="GND@5" x="17.78" y="25.4" length="middle" direction="pwr" rot="R180"/>+ <pin name="1A3" x="17.78" y="22.86" length="middle" direction="in" rot="R180"/>+ <pin name="1A4" x="17.78" y="20.32" length="middle" direction="in" rot="R180"/>+ <pin name="VCC@3" x="17.78" y="17.78" length="middle" direction="pwr" rot="R180"/>+ <pin name="1A5" x="17.78" y="15.24" length="middle" direction="in" rot="R180"/>+ <pin name="1A6" x="17.78" y="12.7" length="middle" direction="in" rot="R180"/>+ <pin name="1A7" x="17.78" y="10.16" length="middle" direction="in" rot="R180"/>+ <pin name="GND@6" x="17.78" y="7.62" length="middle" direction="pwr" rot="R180"/>+ <pin name="1A8" x="17.78" y="5.08" length="middle" direction="in" rot="R180"/>+ <pin name="1A9" x="17.78" y="2.54" length="middle" direction="in" rot="R180"/>+ <pin name="1A10" x="17.78" y="0" length="middle" direction="in" rot="R180"/>+ <pin name="2A1" x="17.78" y="-2.54" length="middle" direction="in" rot="R180"/>+ <pin name="2A2" x="17.78" y="-5.08" length="middle" direction="in" rot="R180"/>+ <pin name="2A3" x="17.78" y="-7.62" length="middle" direction="in" rot="R180"/>+ <pin name="GND@7" x="17.78" y="-10.16" length="middle" direction="pwr" rot="R180"/>+ <pin name="2A4" x="17.78" y="-12.7" length="middle" direction="in" rot="R180"/>+ <pin name="2A5" x="17.78" y="-15.24" length="middle" direction="in" rot="R180"/>+ <pin name="2A6" x="17.78" y="-17.78" length="middle" direction="in" rot="R180"/>+ <pin name="VCC@4" x="17.78" y="-20.32" length="middle" direction="pwr" rot="R180"/>+ <pin name="2A7" x="17.78" y="-22.86" length="middle" direction="in" rot="R180"/>+ <pin name="2A8" x="17.78" y="-25.4" length="middle" direction="in" rot="R180"/>+ <pin name="GND@8" x="17.78" y="-27.94" length="middle" direction="pwr" rot="R180"/>+ <pin name="2A9" x="17.78" y="-30.48" length="middle" direction="in" rot="R180"/>+ <pin name="2A10" x="17.78" y="-33.02" length="middle" direction="in" rot="R180"/>+ <pin name="2OE2" x="17.78" y="-35.56" length="middle" direction="in" rot="R180"/>+</symbol>+</symbols>+<devicesets>+<deviceset name="SN74AVC16827DGGR" prefix="U">+ <description></description>+ <gates>+ <gate name="G$1" symbol="SN74AVC16827DGGR" x="0" y="0"/>+ </gates>+ <devices>+ <device name="" package="TSSOP-56_6.1x14mm_P0.5mm">+ <connects>+ <connect gate="G$1" pin="1OE1" pad="1"/>+ <connect gate="G$1" pin="1Y1" pad="2"/>+ <connect gate="G$1" pin="1Y2" pad="3"/>+ <connect gate="G$1" pin="GND" pad="4"/>+ <connect gate="G$1" pin="1Y3" pad="5"/>+ <connect gate="G$1" pin="1Y4" pad="6"/>+ <connect gate="G$1" pin="VCC" pad="7"/>+ <connect gate="G$1" pin="1Y5" pad="8"/>+ <connect gate="G$1" pin="1Y6" pad="9"/>+ <connect gate="G$1" pin="1Y7" pad="10"/>+ <connect gate="G$1" pin="GND@2" pad="11"/>+ <connect gate="G$1" pin="1Y8" pad="12"/>+ <connect gate="G$1" pin="1Y9" pad="13"/>+ <connect gate="G$1" pin="1Y10" pad="14"/>+ <connect gate="G$1" pin="2Y1" pad="15"/>+ <connect gate="G$1" pin="2Y2" pad="16"/>+ <connect gate="G$1" pin="2Y3" pad="17"/>+ <connect gate="G$1" pin="GND@3" pad="18"/>+ <connect gate="G$1" pin="2Y4" pad="19"/>+ <connect gate="G$1" pin="2Y5" pad="20"/>+ <connect gate="G$1" pin="2Y6" pad="21"/>+ <connect gate="G$1" pin="VCC@2" pad="22"/>+ <connect gate="G$1" pin="2Y7" pad="23"/>+ <connect gate="G$1" pin="2Y8" pad="24"/>+ <connect gate="G$1" pin="GND@4" pad="25"/>+ <connect gate="G$1" pin="2Y9" pad="26"/>+ <connect gate="G$1" pin="2Y10" pad="27"/>+ <connect gate="G$1" pin="2OE1" pad="28"/>+ <connect gate="G$1" pin="1OE2" pad="56"/>+ <connect gate="G$1" pin="1A1" pad="55"/>+ <connect gate="G$1" pin="1A2" pad="54"/>+ <connect gate="G$1" pin="GND@5" pad="53"/>+ <connect gate="G$1" pin="1A3" pad="52"/>+ <connect gate="G$1" pin="1A4" pad="51"/>+ <connect gate="G$1" pin="VCC@3" pad="50"/>+ <connect gate="G$1" pin="1A5" pad="49"/>+ <connect gate="G$1" pin="1A6" pad="48"/>+ <connect gate="G$1" pin="1A7" pad="47"/>+ <connect gate="G$1" pin="GND@6" pad="46"/>+ <connect gate="G$1" pin="1A8" pad="45"/>+ <connect gate="G$1" pin="1A9" pad="44"/>+ <connect gate="G$1" pin="1A10" pad="43"/>+ <connect gate="G$1" pin="2A1" pad="42"/>+ <connect gate="G$1" pin="2A2" pad="41"/>+ <connect gate="G$1" pin="2A3" pad="40"/>+ <connect gate="G$1" pin="GND@7" pad="39"/>+ <connect gate="G$1" pin="2A4" pad="38"/>+ <connect gate="G$1" pin="2A5" pad="37"/>+ <connect gate="G$1" pin="2A6" pad="36"/>+ <connect gate="G$1" pin="VCC@4" pad="35"/>+ <connect gate="G$1" pin="2A7" pad="34"/>+ <connect gate="G$1" pin="2A8" pad="33"/>+ <connect gate="G$1" pin="GND@8" pad="32"/>+ <connect gate="G$1" pin="2A9" pad="31"/>+ <connect gate="G$1" pin="2A10" pad="30"/>+ <connect gate="G$1" pin="2OE2" pad="29"/>+ </connects>+ <technologies><technology name=""/></technologies>+ </device>+ </devices>+</deviceset>+</devicesets>+</library>+</drawing>+</eagle>
sn74avc16827dggr.stepadded+17433@@ -0,0 +1,17433 @@+ISO-10303-21;+HEADER;+/* TSSOP-56_6.1x14mm_P0.5mm.step 3D STEP model for use in ECAD systems+ * Copyright (C) 2025, KiCAD+ *+ * This work is licensed under the+ * [Creative Commons CC-BY-SA 4.0 License](https://creativecommons.org/licenses/by-sa/4.0/legalcode),+ * with the following exception:+ *+ * To the extent that the creation of electronic designs that use 'Licensed Material' can be+ * considered to be 'Adapted Material', then the copyright holder waives article 3 of the license+ * with respect to these designs and any generated files which use data provided as part of the+ * 'Licensed Material'.+ *+ * You are free to use the library data in your own projects without the obligation to share your+ * project files under this or any other license agreement. However, if you wish to distribute+ * these libraries, or parts thereof (including in modified form) as a collection then the exception+ * above does not apply. Please refer to+ * https://gitlab.com/kicad/libraries/kicad-packages3D/-/blob/master/LICENSE.md for further clarification+ * of the exception.+ *+ * Disclaimer of Warranties and Limitation of Liability.+ * These libraries are provided in the hope that they will be useful, but are provided without warranty of any kind, express or implied.+ * USE 3D CAD DATA AT YOUR OWN RISK+ * DO NOT RELY UPON ANY INFORMATION FOUND HERE WITHOUT INDEPENDENT VERIFICATION.+ */++FILE_DESCRIPTION(+/* description */ ('model of TSSOP-56_6.1x14mm_P0.5mm'),+/* implementation_level */ '2;1');++FILE_NAME(+/* name */ 'TSSOP-56_6.1x14mm_P0.5mm.step',+/* time_stamp */ '1970-01-01T00:00:00',+/* author */ ('KiCAD','kicad'),+/* organization */ ('OCCT'),+/* preprocessor_version */ '',+/* originating_system */ 'KiCAD',+/* authorisation */ '');++FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));+ENDSEC;++DATA;+#1=APPLICATION_PROTOCOL_DEFINITION('international standard','automotive_design',2000,#2);+#2=APPLICATION_CONTEXT('core data for automotive mechanical design processes');+#3=SHAPE_DEFINITION_REPRESENTATION(#4,#10);+#4=PRODUCT_DEFINITION_SHAPE('','',#5);+#5=PRODUCT_DEFINITION('design','',#6,#9);+#6=PRODUCT_DEFINITION_FORMATION('','',#7);+#7=PRODUCT('TSSOP-56_6.1x14mm_P0.5mm','TSSOP-56_6.1x14mm_P0.5mm','',(#8));+#8=PRODUCT_CONTEXT('',#2,'mechanical');+#9=PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#10=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#15),#16489);+#11=AXIS2_PLACEMENT_3D('',#12,#13,#14);+#12=CARTESIAN_POINT('',(0.,0.,0.));+#13=DIRECTION('',(0.,0.,1.));+#14=DIRECTION('',(1.,0.,-0.));+#15=MANIFOLD_SOLID_BREP('',#16);+#16=CLOSED_SHELL('',(#17,#43,#96,#109,#128,#141,#378,#615,#628,#641,#650,#665,#729,#740,#759,#784,#802,#823,#841,#862,#880,#901,#919,#940,#958,#979,#997,#1018,#1036,#1057,#1075,#1096,#1114,#1135,#1153,#1174,#1192,#1213,#1231,#1252,#1270,#1291,#1309,#1330,#1348,#1369,#1387,#1408,#1426,#1447,#1465,#1486,#1504,#1525,#1543,#1564,#1582,#1603,#1621,#1642,#1660,#1681,#1699,#1720,#1738,#1759,#1777,#1798,#1816,#1837,#1847,#1859,#1880,#1898,#1919,#1937,#1958,#1976,#1997,#2015,#2036,#2054,#2075,#2093,#2114,#2132,#2153,#2171,#2192,#2210,#2231,#2249,#2270,#2288,#2309,#2327,#2348,#2366,#2387,#2405,#2426,#2444,#2465,#2483,#2504,#2522,#2543,#2561,#2582,#2600,#2621,#2639,#2660,#2678,#2699,#2717,#2738,#2756,#2777,#2795,#2816,#2834,#2855,#2873,#2894,#2912,#2933,#2950,#2965,#2980,#2991,#3015,#3253,#3267,#3281,#3295,#3533,#3553,#3584,#3656,#3674,#3727,#3738,#3798,#3815,#3868,#3879,#3939,#3956,#4009,#4020,#4080,#4097,#4150,#4161,#4221,#4238,#4291,#4302,#4362,#4379,#4432,#4443,#4503,#4520,#4573,#4584,#4644,#4661,#4714,#4725,#4785,#4802,#4855,#4866,#4926,#4943,#4996,#5007,#5067,#5084,#5137,#5148,#5208,#5225,#5278,#5289,#5349,#5366,#5419,#5430,#5490,#5507,#5560,#5571,#5631,#5648,#5701,#5712,#5772,#5789,#5842,#5853,#5913,#5930,#5983,#5994,#6054,#6071,#6124,#6135,#6195,#6212,#6265,#6276,#6336,#6353,#6406,#6417,#6477,#6494,#6547,#6558,#6618,#6635,#6688,#6699,#6759,#6776,#6829,#6840,#6900,#6917,#6970,#6981,#7041,#7058,#7111,#7122,#7182,#7199,#7252,#7263,#7323,#7340,#7393,#7401,#7459,#7476,#7524,#7590,#7606,#7654,#7664,#7724,#7740,#7793,#7804,#7864,#7880,#7933,#7944,#8004,#8020,#8073,#8084,#8144,#8160,#8213,#8224,#8284,#8300,#8353,#8364,#8424,#8440,#8493,#8504,#8564,#8580,#8633,#8644,#8704,#8720,#8773,#8784,#8844,#8860,#8913,#8924,#8984,#9000,#9053,#9064,#9124,#9140,#9193,#9204,#9264,#9280,#9333,#9344,#9404,#9420,#9473,#9484,#9544,#9560,#9613,#9624,#9684,#9700,#9753,#9764,#9824,#9840,#9893,#9904,#9964,#9980,#10033,#10044,#10104,#10120,#10173,#10184,#10244,#10260,#10313,#10324,#10384,#10400,#10453,#10464,#10524,#10540,#10593,#10604,#10664,#10680,#10733,#10744,#10804,#10820,#10873,#10884,#10944,#10960,#11013,#11024,#11084,#11100,#11153,#11164,#11224,#11240,#11293,#11304,#11364,#11380,#11431,#11441,#11453,#11465,#11477,#11489,#11501,#11513,#11525,#11537,#11549,#11561,#11573,#11585,#11597,#11609,#11621,#11633,#11645,#11657,#11669,#11681,#11693,#11705,#11717,#11729,#11741,#11753,#11765,#11799,#11809,#11821,#11833,#11845,#11857,#11869,#11881,#11893,#11905,#11917,#11929,#11941,#11953,#11965,#11977,#11989,#12001,#12013,#12025,#12037,#12049,#12061,#12073,#12085,#12097,#12109,#12121,#12133,#12143,#12153,#12161,#12171,#12182,#12192,#12202,#12212,#12222,#12232,#12241,#12251,#12261,#12271,#12281,#12291,#12301,#12311,#12319,#12329,#12339,#12349,#12359,#12369,#12379,#12389,#12397,#12407,#12417,#12427,#12437,#12447,#12457,#12467,#12475,#12485,#12495,#12505,#12515,#12525,#12535,#12545,#12553,#12563,#12573,#12583,#12593,#12603,#12613,#12623,#12631,#12641,#12651,#12661,#12671,#12681,#12691,#12701,#12709,#12719,#12729,#12739,#12749,#12759,#12769,#12779,#12787,#12797,#12807,#12817,#12827,#12837,#12847,#12857,#12865,#12875,#12885,#12895,#12905,#12915,#12925,#12935,#12943,#12953,#12963,#12973,#12983,#12993,#13003,#13013,#13021,#13031,#13041,#13051,#13061,#13071,#13081,#13091,#13099,#13109,#13119,#13129,#13139,#13149,#13159,#13169,#13177,#13187,#13197,#13207,#13217,#13227,#13237,#13247,#13255,#13265,#13275,#13285,#13295,#13305,#13315,#13325,#13333,#13343,#13353,#13363,#13373,#13383,#13393,#13403,#13411,#13421,#13431,#13441,#13451,#13461,#13471,#13481,#13489,#13499,#13509,#13519,#13529,#13539,#13549,#13559,#13567,#13577,#13587,#13597,#13607,#13617,#13627,#13637,#13645,#13655,#13665,#13675,#13685,#13695,#13705,#13715,#13723,#13733,#13743,#13753,#13763,#13773,#13783,#13793,#13801,#13811,#13821,#13831,#13841,#13851,#13861,#13871,#13879,#13889,#13899,#13909,#13919,#13929,#13939,#13949,#13957,#13967,#13977,#13987,#13997,#14007,#14017,#14027,#14035,#14045,#14055,#14065,#14075,#14085,#14095,#14105,#14113,#14123,#14133,#14143,#14153,#14163,#14173,#14183,#14191,#14201,#14211,#14221,#14231,#14241,#14251,#14261,#14269,#14279,#14289,#14299,#14309,#14319,#14329,#14337,#14348,#14357,#14367,#14377,#14387,#14397,#14406,#14416,#14426,#14435,#14445,#14455,#14465,#14475,#14483,#14493,#14503,#14512,#14522,#14532,#14542,#14552,#14560,#14570,#14580,#14589,#14599,#14609,#14619,#14629,#14637,#14647,#14657,#14666,#14676,#14686,#14696,#14706,#14714,#14724,#14734,#14743,#14753,#14763,#14773,#14783,#14791,#14801,#14811,#14820,#14830,#14840,#14850,#14860,#14868,#14878,#14888,#14897,#14907,#14917,#14927,#14937,#14945,#14955,#14965,#14974,#14984,#14994,#15004,#15014,#15022,#15032,#15042,#15051,#15061,#15071,#15081,#15091,#15099,#15109,#15119,#15128,#15138,#15148,#15158,#15168,#15176,#15186,#15196,#15205,#15215,#15225,#15235,#15245,#15253,#15263,#15273,#15282,#15292,#15302,#15312,#15322,#15330,#15340,#15350,#15359,#15369,#15379,#15389,#15399,#15407,#15417,#15427,#15436,#15446,#15456,#15466,#15476,#15484,#15494,#15504,#15513,#15523,#15533,#15543,#15553,#15561,#15571,#15581,#15590,#15600,#15610,#15620,#15630,#15638,#15648,#15658,#15667,#15677,#15687,#15697,#15707,#15715,#15725,#15735,#15744,#15754,#15764,#15774,#15784,#15792,#15802,#15812,#15821,#15831,#15841,#15851,#15861,#15869,#15879,#15889,#15898,#15908,#15918,#15928,#15938,#15946,#15956,#15966,#15975,#15985,#15995,#16005,#16015,#16023,#16033,#16043,#16052,#16062,#16072,#16082,#16092,#16100,#16110,#16120,#16129,#16139,#16149,#16159,#16169,#16177,#16187,#16197,#16206,#16216,#16226,#16236,#16246,#16254,#16264,#16274,#16283,#16293,#16303,#16313,#16323,#16331,#16341,#16351,#16360,#16370,#16380,#16390,#16400,#16408,#16418,#16428,#16437,#16447,#16457,#16467,#16477,#16485));+#17=ADVANCED_FACE('',(#18),#42,.F.);+#18=FACE_BOUND('',#19,.F.);+#19=EDGE_LOOP('',(#20,#29,#34,#39));+#20=ORIENTED_EDGE('',*,*,#21,.T.);+#21=EDGE_CURVE('',#22,#24,#26,.T.);+#22=VERTEX_POINT('',#23);+#23=CARTESIAN_POINT('',(-2.917488687666,6.914977375332,0.1));+#24=VERTEX_POINT('',#25);+#25=CARTESIAN_POINT('',(2.917488687666,6.914977375332,0.1));+#26=LINE('',#23,#27);+#27=VECTOR('',#28,1.);+#28=DIRECTION('',(1.,1.110223024625E-16,0.));+#29=ORIENTED_EDGE('',*,*,#30,.T.);+#30=EDGE_CURVE('',#24,#31,#33,.T.);+#31=VERTEX_POINT('',#32);+#32=CARTESIAN_POINT('',(2.96,7.,0.5));+#33=B_SPLINE_CURVE_WITH_KNOTS('',1,(#25,#32),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#34=ORIENTED_EDGE('',*,*,#35,.F.);+#35=EDGE_CURVE('',#36,#31,#38,.T.);+#36=VERTEX_POINT('',#37);+#37=CARTESIAN_POINT('',(-2.96,7.,0.5));+#38=LINE('',#37,#27);+#39=ORIENTED_EDGE('',*,*,#40,.F.);+#40=EDGE_CURVE('',#22,#36,#41,.T.);+#41=B_SPLINE_CURVE_WITH_KNOTS('',1,(#23,#37),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#42=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#23,#37),(#25,#32)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,5.92),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#43=ADVANCED_FACE('',(#44),#93,.F.);+#44=FACE_BOUND('',#45,.T.);+#45=EDGE_LOOP('',(#20,#46,#53,#60,#67,#74,#81,#88));+#46=ORIENTED_EDGE('',*,*,#47,.T.);+#47=EDGE_CURVE('',#24,#48,#50,.T.);+#48=VERTEX_POINT('',#49);+#49=CARTESIAN_POINT('',(2.964977375332,6.867488687666,0.1));+#50=LINE('',#25,#51);+#51=VECTOR('',#52,1.);+#52=DIRECTION('',(0.707106781187,-0.707106781187,0.));+#53=ORIENTED_EDGE('',*,*,#54,.T.);+#54=EDGE_CURVE('',#48,#55,#57,.T.);+#55=VERTEX_POINT('',#56);+#56=CARTESIAN_POINT('',(2.964977375332,-6.867488687666,0.1));+#57=LINE('',#49,#58);+#58=VECTOR('',#59,1.);+#59=DIRECTION('',(1.110223024625E-16,-1.,0.));+#60=ORIENTED_EDGE('',*,*,#61,.T.);+#61=EDGE_CURVE('',#55,#62,#64,.T.);+#62=VERTEX_POINT('',#63);+#63=CARTESIAN_POINT('',(2.917488687666,-6.914977375332,0.1));+#64=LINE('',#56,#65);+#65=VECTOR('',#66,1.);+#66=DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#67=ORIENTED_EDGE('',*,*,#68,.T.);+#68=EDGE_CURVE('',#62,#69,#71,.T.);+#69=VERTEX_POINT('',#70);+#70=CARTESIAN_POINT('',(-2.917488687666,-6.914977375332,0.1));+#71=LINE('',#63,#72);+#72=VECTOR('',#73,1.);+#73=DIRECTION('',(-1.,-1.110223024625E-16,0.));+#74=ORIENTED_EDGE('',*,*,#75,.T.);+#75=EDGE_CURVE('',#69,#76,#78,.T.);+#76=VERTEX_POINT('',#77);+#77=CARTESIAN_POINT('',(-2.964977375332,-6.867488687666,0.1));+#78=LINE('',#70,#79);+#79=VECTOR('',#80,1.);+#80=DIRECTION('',(-0.707106781187,0.707106781187,0.));+#81=ORIENTED_EDGE('',*,*,#82,.T.);+#82=EDGE_CURVE('',#76,#83,#85,.T.);+#83=VERTEX_POINT('',#84);+#84=CARTESIAN_POINT('',(-2.964977375332,6.867488687666,0.1));+#85=LINE('',#77,#86);+#86=VECTOR('',#87,1.);+#87=DIRECTION('',(-1.110223024625E-16,1.,0.));+#88=ORIENTED_EDGE('',*,*,#89,.T.);+#89=EDGE_CURVE('',#83,#22,#90,.T.);+#90=LINE('',#84,#91);+#91=VECTOR('',#92,1.);+#92=DIRECTION('',(0.707106781187,0.707106781187,0.));+#93=PLANE('',#94);+#94=AXIS2_PLACEMENT_3D('',#23,#13,#95);+#95=DIRECTION('',(0.388726815289,-0.921353061033,0.));+#96=ADVANCED_FACE('',(#97),#108,.F.);+#97=FACE_BOUND('',#98,.F.);+#98=EDGE_LOOP('',(#46,#99,#104,#107));+#99=ORIENTED_EDGE('',*,*,#100,.T.);+#100=EDGE_CURVE('',#48,#101,#103,.T.);+#101=VERTEX_POINT('',#102);+#102=CARTESIAN_POINT('',(3.05,6.91,0.5));+#103=B_SPLINE_CURVE_WITH_KNOTS('',1,(#49,#102),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#104=ORIENTED_EDGE('',*,*,#105,.F.);+#105=EDGE_CURVE('',#31,#101,#106,.T.);+#106=LINE('',#32,#51);+#107=ORIENTED_EDGE('',*,*,#30,.F.);+#108=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#25,#32),(#49,#102)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.127279220614),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#109=ADVANCED_FACE('',(#110),#126,.F.);+#110=FACE_BOUND('',#111,.F.);+#111=EDGE_LOOP('',(#112,#113,#118,#123));+#112=ORIENTED_EDGE('',*,*,#35,.T.);+#113=ORIENTED_EDGE('',*,*,#114,.T.);+#114=EDGE_CURVE('',#31,#115,#117,.T.);+#115=VERTEX_POINT('',#116);+#116=CARTESIAN_POINT('',(2.96,7.,0.65));+#117=B_SPLINE_CURVE_WITH_KNOTS('',1,(#32,#116),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#118=ORIENTED_EDGE('',*,*,#119,.F.);+#119=EDGE_CURVE('',#120,#115,#122,.T.);+#120=VERTEX_POINT('',#121);+#121=CARTESIAN_POINT('',(-2.96,7.,0.65));+#122=LINE('',#121,#27);+#123=ORIENTED_EDGE('',*,*,#124,.F.);+#124=EDGE_CURVE('',#36,#120,#125,.T.);+#125=B_SPLINE_CURVE_WITH_KNOTS('',1,(#37,#121),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#126=PLANE('',#127);+#127=AXIS2_PLACEMENT_3D('',#121,#59,#28);+#128=ADVANCED_FACE('',(#129),#140,.F.);+#129=FACE_BOUND('',#130,.F.);+#130=EDGE_LOOP('',(#88,#131,#132,#137));+#131=ORIENTED_EDGE('',*,*,#40,.T.);+#132=ORIENTED_EDGE('',*,*,#133,.F.);+#133=EDGE_CURVE('',#134,#36,#136,.T.);+#134=VERTEX_POINT('',#135);+#135=CARTESIAN_POINT('',(-3.05,6.91,0.5));+#136=LINE('',#135,#91);+#137=ORIENTED_EDGE('',*,*,#138,.F.);+#138=EDGE_CURVE('',#83,#134,#139,.T.);+#139=B_SPLINE_CURVE_WITH_KNOTS('',1,(#84,#135),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#140=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#84,#135),(#23,#37)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.127279220614),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#141=ADVANCED_FACE('',(#142),#377,.F.);+#142=FACE_BOUND('',#143,.F.);+#143=EDGE_LOOP('',(#81,#144,#145,#151,#155,#159,#163,#167,#171,#175,#179,#183,#187,#191,#195,#199,#203,#207,#211,#215,#219,#223,#227,#231,#235,#239,#243,#247,#251,#255,#259,#263,#267,#271,#275,#279,#283,#287,#291,#295,#299,#303,#307,#311,#315,#319,#323,#327,#331,#335,#339,#343,#347,#351,#355,#359,#363,#367,#371,#374));+#144=ORIENTED_EDGE('',*,*,#138,.T.);+#145=ORIENTED_EDGE('',*,*,#146,.F.);+#146=EDGE_CURVE('',#147,#134,#149,.T.);+#147=VERTEX_POINT('',#148);+#148=CARTESIAN_POINT('',(-3.05,6.86,0.5));+#149=LINE('',#150,#86);+#150=CARTESIAN_POINT('',(-3.05,-6.91,0.5));+#151=ORIENTED_EDGE('',*,*,#152,.F.);+#152=EDGE_CURVE('',#153,#147,#149,.T.);+#153=VERTEX_POINT('',#154);+#154=CARTESIAN_POINT('',(-3.05,6.64,0.5));+#155=ORIENTED_EDGE('',*,*,#156,.F.);+#156=EDGE_CURVE('',#157,#153,#149,.T.);+#157=VERTEX_POINT('',#158);+#158=CARTESIAN_POINT('',(-3.05,6.36,0.5));+#159=ORIENTED_EDGE('',*,*,#160,.F.);+#160=EDGE_CURVE('',#161,#157,#149,.T.);+#161=VERTEX_POINT('',#162);+#162=CARTESIAN_POINT('',(-3.05,6.14,0.5));+#163=ORIENTED_EDGE('',*,*,#164,.F.);+#164=EDGE_CURVE('',#165,#161,#149,.T.);+#165=VERTEX_POINT('',#166);+#166=CARTESIAN_POINT('',(-3.05,5.86,0.5));+#167=ORIENTED_EDGE('',*,*,#168,.F.);+#168=EDGE_CURVE('',#169,#165,#149,.T.);+#169=VERTEX_POINT('',#170);+#170=CARTESIAN_POINT('',(-3.05,5.64,0.5));+#171=ORIENTED_EDGE('',*,*,#172,.F.);+#172=EDGE_CURVE('',#173,#169,#149,.T.);+#173=VERTEX_POINT('',#174);+#174=CARTESIAN_POINT('',(-3.05,5.36,0.5));+#175=ORIENTED_EDGE('',*,*,#176,.F.);+#176=EDGE_CURVE('',#177,#173,#149,.T.);+#177=VERTEX_POINT('',#178);+#178=CARTESIAN_POINT('',(-3.05,5.14,0.5));+#179=ORIENTED_EDGE('',*,*,#180,.F.);+#180=EDGE_CURVE('',#181,#177,#149,.T.);+#181=VERTEX_POINT('',#182);+#182=CARTESIAN_POINT('',(-3.05,4.86,0.5));+#183=ORIENTED_EDGE('',*,*,#184,.F.);+#184=EDGE_CURVE('',#185,#181,#149,.T.);+#185=VERTEX_POINT('',#186);+#186=CARTESIAN_POINT('',(-3.05,4.64,0.5));+#187=ORIENTED_EDGE('',*,*,#188,.F.);+#188=EDGE_CURVE('',#189,#185,#149,.T.);+#189=VERTEX_POINT('',#190);+#190=CARTESIAN_POINT('',(-3.05,4.36,0.5));+#191=ORIENTED_EDGE('',*,*,#192,.F.);+#192=EDGE_CURVE('',#193,#189,#149,.T.);+#193=VERTEX_POINT('',#194);+#194=CARTESIAN_POINT('',(-3.05,4.14,0.5));+#195=ORIENTED_EDGE('',*,*,#196,.F.);+#196=EDGE_CURVE('',#197,#193,#149,.T.);+#197=VERTEX_POINT('',#198);+#198=CARTESIAN_POINT('',(-3.05,3.86,0.5));+#199=ORIENTED_EDGE('',*,*,#200,.F.);+#200=EDGE_CURVE('',#201,#197,#149,.T.);+#201=VERTEX_POINT('',#202);+#202=CARTESIAN_POINT('',(-3.05,3.64,0.5));+#203=ORIENTED_EDGE('',*,*,#204,.F.);+#204=EDGE_CURVE('',#205,#201,#149,.T.);+#205=VERTEX_POINT('',#206);+#206=CARTESIAN_POINT('',(-3.05,3.36,0.5));+#207=ORIENTED_EDGE('',*,*,#208,.F.);+#208=EDGE_CURVE('',#209,#205,#149,.T.);+#209=VERTEX_POINT('',#210);+#210=CARTESIAN_POINT('',(-3.05,3.14,0.5));+#211=ORIENTED_EDGE('',*,*,#212,.F.);+#212=EDGE_CURVE('',#213,#209,#149,.T.);+#213=VERTEX_POINT('',#214);+#214=CARTESIAN_POINT('',(-3.05,2.86,0.5));+#215=ORIENTED_EDGE('',*,*,#216,.F.);+#216=EDGE_CURVE('',#217,#213,#149,.T.);+#217=VERTEX_POINT('',#218);+#218=CARTESIAN_POINT('',(-3.05,2.64,0.5));+#219=ORIENTED_EDGE('',*,*,#220,.F.);+#220=EDGE_CURVE('',#221,#217,#149,.T.);+#221=VERTEX_POINT('',#222);+#222=CARTESIAN_POINT('',(-3.05,2.36,0.5));+#223=ORIENTED_EDGE('',*,*,#224,.F.);+#224=EDGE_CURVE('',#225,#221,#149,.T.);+#225=VERTEX_POINT('',#226);+#226=CARTESIAN_POINT('',(-3.05,2.14,0.5));+#227=ORIENTED_EDGE('',*,*,#228,.F.);+#228=EDGE_CURVE('',#229,#225,#149,.T.);+#229=VERTEX_POINT('',#230);+#230=CARTESIAN_POINT('',(-3.05,1.86,0.5));+#231=ORIENTED_EDGE('',*,*,#232,.F.);+#232=EDGE_CURVE('',#233,#229,#149,.T.);+#233=VERTEX_POINT('',#234);+#234=CARTESIAN_POINT('',(-3.05,1.64,0.5));+#235=ORIENTED_EDGE('',*,*,#236,.F.);+#236=EDGE_CURVE('',#237,#233,#149,.T.);+#237=VERTEX_POINT('',#238);+#238=CARTESIAN_POINT('',(-3.05,1.36,0.5));+#239=ORIENTED_EDGE('',*,*,#240,.F.);+#240=EDGE_CURVE('',#241,#237,#149,.T.);+#241=VERTEX_POINT('',#242);+#242=CARTESIAN_POINT('',(-3.05,1.14,0.5));+#243=ORIENTED_EDGE('',*,*,#244,.F.);+#244=EDGE_CURVE('',#245,#241,#149,.T.);+#245=VERTEX_POINT('',#246);+#246=CARTESIAN_POINT('',(-3.05,0.86,0.5));+#247=ORIENTED_EDGE('',*,*,#248,.F.);+#248=EDGE_CURVE('',#249,#245,#149,.T.);+#249=VERTEX_POINT('',#250);+#250=CARTESIAN_POINT('',(-3.05,0.64,0.5));+#251=ORIENTED_EDGE('',*,*,#252,.F.);+#252=EDGE_CURVE('',#253,#249,#149,.T.);+#253=VERTEX_POINT('',#254);+#254=CARTESIAN_POINT('',(-3.05,0.36,0.5));+#255=ORIENTED_EDGE('',*,*,#256,.F.);+#256=EDGE_CURVE('',#257,#253,#149,.T.);+#257=VERTEX_POINT('',#258);+#258=CARTESIAN_POINT('',(-3.05,0.14,0.5));+#259=ORIENTED_EDGE('',*,*,#260,.F.);+#260=EDGE_CURVE('',#261,#257,#149,.T.);+#261=VERTEX_POINT('',#262);+#262=CARTESIAN_POINT('',(-3.05,-0.14,0.5));+#263=ORIENTED_EDGE('',*,*,#264,.F.);+#264=EDGE_CURVE('',#265,#261,#149,.T.);+#265=VERTEX_POINT('',#266);+#266=CARTESIAN_POINT('',(-3.05,-0.36,0.5));+#267=ORIENTED_EDGE('',*,*,#268,.F.);+#268=EDGE_CURVE('',#269,#265,#149,.T.);+#269=VERTEX_POINT('',#270);+#270=CARTESIAN_POINT('',(-3.05,-0.64,0.5));+#271=ORIENTED_EDGE('',*,*,#272,.F.);+#272=EDGE_CURVE('',#273,#269,#149,.T.);+#273=VERTEX_POINT('',#274);+#274=CARTESIAN_POINT('',(-3.05,-0.86,0.5));+#275=ORIENTED_EDGE('',*,*,#276,.F.);+#276=EDGE_CURVE('',#277,#273,#149,.T.);+#277=VERTEX_POINT('',#278);+#278=CARTESIAN_POINT('',(-3.05,-1.14,0.5));+#279=ORIENTED_EDGE('',*,*,#280,.F.);+#280=EDGE_CURVE('',#281,#277,#149,.T.);+#281=VERTEX_POINT('',#282);+#282=CARTESIAN_POINT('',(-3.05,-1.36,0.5));+#283=ORIENTED_EDGE('',*,*,#284,.F.);+#284=EDGE_CURVE('',#285,#281,#149,.T.);+#285=VERTEX_POINT('',#286);+#286=CARTESIAN_POINT('',(-3.05,-1.64,0.5));+#287=ORIENTED_EDGE('',*,*,#288,.F.);+#288=EDGE_CURVE('',#289,#285,#149,.T.);+#289=VERTEX_POINT('',#290);+#290=CARTESIAN_POINT('',(-3.05,-1.86,0.5));+#291=ORIENTED_EDGE('',*,*,#292,.F.);+#292=EDGE_CURVE('',#293,#289,#149,.T.);+#293=VERTEX_POINT('',#294);+#294=CARTESIAN_POINT('',(-3.05,-2.14,0.5));+#295=ORIENTED_EDGE('',*,*,#296,.F.);+#296=EDGE_CURVE('',#297,#293,#149,.T.);+#297=VERTEX_POINT('',#298);+#298=CARTESIAN_POINT('',(-3.05,-2.36,0.5));+#299=ORIENTED_EDGE('',*,*,#300,.F.);+#300=EDGE_CURVE('',#301,#297,#149,.T.);+#301=VERTEX_POINT('',#302);+#302=CARTESIAN_POINT('',(-3.05,-2.64,0.5));+#303=ORIENTED_EDGE('',*,*,#304,.F.);+#304=EDGE_CURVE('',#305,#301,#149,.T.);+#305=VERTEX_POINT('',#306);+#306=CARTESIAN_POINT('',(-3.05,-2.86,0.5));+#307=ORIENTED_EDGE('',*,*,#308,.F.);+#308=EDGE_CURVE('',#309,#305,#149,.T.);+#309=VERTEX_POINT('',#310);+#310=CARTESIAN_POINT('',(-3.05,-3.14,0.5));+#311=ORIENTED_EDGE('',*,*,#312,.F.);+#312=EDGE_CURVE('',#313,#309,#149,.T.);+#313=VERTEX_POINT('',#314);+#314=CARTESIAN_POINT('',(-3.05,-3.36,0.5));+#315=ORIENTED_EDGE('',*,*,#316,.F.);+#316=EDGE_CURVE('',#317,#313,#149,.T.);+#317=VERTEX_POINT('',#318);+#318=CARTESIAN_POINT('',(-3.05,-3.64,0.5));+#319=ORIENTED_EDGE('',*,*,#320,.F.);+#320=EDGE_CURVE('',#321,#317,#149,.T.);+#321=VERTEX_POINT('',#322);+#322=CARTESIAN_POINT('',(-3.05,-3.86,0.5));+#323=ORIENTED_EDGE('',*,*,#324,.F.);+#324=EDGE_CURVE('',#325,#321,#149,.T.);+#325=VERTEX_POINT('',#326);+#326=CARTESIAN_POINT('',(-3.05,-4.14,0.5));+#327=ORIENTED_EDGE('',*,*,#328,.F.);+#328=EDGE_CURVE('',#329,#325,#149,.T.);+#329=VERTEX_POINT('',#330);+#330=CARTESIAN_POINT('',(-3.05,-4.36,0.5));+#331=ORIENTED_EDGE('',*,*,#332,.F.);+#332=EDGE_CURVE('',#333,#329,#149,.T.);+#333=VERTEX_POINT('',#334);+#334=CARTESIAN_POINT('',(-3.05,-4.64,0.5));+#335=ORIENTED_EDGE('',*,*,#336,.F.);+#336=EDGE_CURVE('',#337,#333,#149,.T.);+#337=VERTEX_POINT('',#338);+#338=CARTESIAN_POINT('',(-3.05,-4.86,0.5));+#339=ORIENTED_EDGE('',*,*,#340,.F.);+#340=EDGE_CURVE('',#341,#337,#149,.T.);+#341=VERTEX_POINT('',#342);+#342=CARTESIAN_POINT('',(-3.05,-5.14,0.5));+#343=ORIENTED_EDGE('',*,*,#344,.F.);+#344=EDGE_CURVE('',#345,#341,#149,.T.);+#345=VERTEX_POINT('',#346);+#346=CARTESIAN_POINT('',(-3.05,-5.36,0.5));+#347=ORIENTED_EDGE('',*,*,#348,.F.);+#348=EDGE_CURVE('',#349,#345,#149,.T.);+#349=VERTEX_POINT('',#350);+#350=CARTESIAN_POINT('',(-3.05,-5.64,0.5));+#351=ORIENTED_EDGE('',*,*,#352,.F.);+#352=EDGE_CURVE('',#353,#349,#149,.T.);+#353=VERTEX_POINT('',#354);+#354=CARTESIAN_POINT('',(-3.05,-5.86,0.5));+#355=ORIENTED_EDGE('',*,*,#356,.F.);+#356=EDGE_CURVE('',#357,#353,#149,.T.);+#357=VERTEX_POINT('',#358);+#358=CARTESIAN_POINT('',(-3.05,-6.14,0.5));+#359=ORIENTED_EDGE('',*,*,#360,.F.);+#360=EDGE_CURVE('',#361,#357,#149,.T.);+#361=VERTEX_POINT('',#362);+#362=CARTESIAN_POINT('',(-3.05,-6.36,0.5));+#363=ORIENTED_EDGE('',*,*,#364,.F.);+#364=EDGE_CURVE('',#365,#361,#149,.T.);+#365=VERTEX_POINT('',#366);+#366=CARTESIAN_POINT('',(-3.05,-6.64,0.5));+#367=ORIENTED_EDGE('',*,*,#368,.F.);+#368=EDGE_CURVE('',#369,#365,#149,.T.);+#369=VERTEX_POINT('',#370);+#370=CARTESIAN_POINT('',(-3.05,-6.86,0.5));+#371=ORIENTED_EDGE('',*,*,#372,.F.);+#372=EDGE_CURVE('',#373,#369,#149,.T.);+#373=VERTEX_POINT('',#150);+#374=ORIENTED_EDGE('',*,*,#375,.F.);+#375=EDGE_CURVE('',#76,#373,#376,.T.);+#376=B_SPLINE_CURVE_WITH_KNOTS('',1,(#77,#150),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#377=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#77,#150),(#84,#135)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,13.82),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#378=ADVANCED_FACE('',(#379),#614,.F.);+#379=FACE_BOUND('',#380,.F.);+#380=EDGE_LOOP('',(#53,#381,#386,#391,#395,#399,#403,#407,#411,#415,#419,#423,#427,#431,#435,#439,#443,#447,#451,#455,#459,#463,#467,#471,#475,#479,#483,#487,#491,#495,#499,#503,#507,#511,#515,#519,#523,#527,#531,#535,#539,#543,#547,#551,#555,#559,#563,#567,#571,#575,#579,#583,#587,#591,#595,#599,#603,#607,#611,#613));+#381=ORIENTED_EDGE('',*,*,#382,.T.);+#382=EDGE_CURVE('',#55,#383,#385,.T.);+#383=VERTEX_POINT('',#384);+#384=CARTESIAN_POINT('',(3.05,-6.91,0.5));+#385=B_SPLINE_CURVE_WITH_KNOTS('',1,(#56,#384),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#386=ORIENTED_EDGE('',*,*,#387,.F.);+#387=EDGE_CURVE('',#388,#383,#390,.T.);+#388=VERTEX_POINT('',#389);+#389=CARTESIAN_POINT('',(3.05,-6.86,0.5));+#390=LINE('',#102,#58);+#391=ORIENTED_EDGE('',*,*,#392,.F.);+#392=EDGE_CURVE('',#393,#388,#390,.T.);+#393=VERTEX_POINT('',#394);+#394=CARTESIAN_POINT('',(3.05,-6.64,0.5));+#395=ORIENTED_EDGE('',*,*,#396,.F.);+#396=EDGE_CURVE('',#397,#393,#390,.T.);+#397=VERTEX_POINT('',#398);+#398=CARTESIAN_POINT('',(3.05,-6.36,0.5));+#399=ORIENTED_EDGE('',*,*,#400,.F.);+#400=EDGE_CURVE('',#401,#397,#390,.T.);+#401=VERTEX_POINT('',#402);+#402=CARTESIAN_POINT('',(3.05,-6.14,0.5));+#403=ORIENTED_EDGE('',*,*,#404,.F.);+#404=EDGE_CURVE('',#405,#401,#390,.T.);+#405=VERTEX_POINT('',#406);+#406=CARTESIAN_POINT('',(3.05,-5.86,0.5));+#407=ORIENTED_EDGE('',*,*,#408,.F.);+#408=EDGE_CURVE('',#409,#405,#390,.T.);+#409=VERTEX_POINT('',#410);+#410=CARTESIAN_POINT('',(3.05,-5.64,0.5));+#411=ORIENTED_EDGE('',*,*,#412,.F.);+#412=EDGE_CURVE('',#413,#409,#390,.T.);+#413=VERTEX_POINT('',#414);+#414=CARTESIAN_POINT('',(3.05,-5.36,0.5));+#415=ORIENTED_EDGE('',*,*,#416,.F.);+#416=EDGE_CURVE('',#417,#413,#390,.T.);+#417=VERTEX_POINT('',#418);+#418=CARTESIAN_POINT('',(3.05,-5.14,0.5));+#419=ORIENTED_EDGE('',*,*,#420,.F.);+#420=EDGE_CURVE('',#421,#417,#390,.T.);+#421=VERTEX_POINT('',#422);+#422=CARTESIAN_POINT('',(3.05,-4.86,0.5));+#423=ORIENTED_EDGE('',*,*,#424,.F.);+#424=EDGE_CURVE('',#425,#421,#390,.T.);+#425=VERTEX_POINT('',#426);+#426=CARTESIAN_POINT('',(3.05,-4.64,0.5));+#427=ORIENTED_EDGE('',*,*,#428,.F.);+#428=EDGE_CURVE('',#429,#425,#390,.T.);+#429=VERTEX_POINT('',#430);+#430=CARTESIAN_POINT('',(3.05,-4.36,0.5));+#431=ORIENTED_EDGE('',*,*,#432,.F.);+#432=EDGE_CURVE('',#433,#429,#390,.T.);+#433=VERTEX_POINT('',#434);+#434=CARTESIAN_POINT('',(3.05,-4.14,0.5));+#435=ORIENTED_EDGE('',*,*,#436,.F.);+#436=EDGE_CURVE('',#437,#433,#390,.T.);+#437=VERTEX_POINT('',#438);+#438=CARTESIAN_POINT('',(3.05,-3.86,0.5));+#439=ORIENTED_EDGE('',*,*,#440,.F.);+#440=EDGE_CURVE('',#441,#437,#390,.T.);+#441=VERTEX_POINT('',#442);+#442=CARTESIAN_POINT('',(3.05,-3.64,0.5));+#443=ORIENTED_EDGE('',*,*,#444,.F.);+#444=EDGE_CURVE('',#445,#441,#390,.T.);+#445=VERTEX_POINT('',#446);+#446=CARTESIAN_POINT('',(3.05,-3.36,0.5));+#447=ORIENTED_EDGE('',*,*,#448,.F.);+#448=EDGE_CURVE('',#449,#445,#390,.T.);+#449=VERTEX_POINT('',#450);+#450=CARTESIAN_POINT('',(3.05,-3.14,0.5));+#451=ORIENTED_EDGE('',*,*,#452,.F.);+#452=EDGE_CURVE('',#453,#449,#390,.T.);+#453=VERTEX_POINT('',#454);+#454=CARTESIAN_POINT('',(3.05,-2.86,0.5));+#455=ORIENTED_EDGE('',*,*,#456,.F.);+#456=EDGE_CURVE('',#457,#453,#390,.T.);+#457=VERTEX_POINT('',#458);+#458=CARTESIAN_POINT('',(3.05,-2.64,0.5));+#459=ORIENTED_EDGE('',*,*,#460,.F.);+#460=EDGE_CURVE('',#461,#457,#390,.T.);+#461=VERTEX_POINT('',#462);+#462=CARTESIAN_POINT('',(3.05,-2.36,0.5));+#463=ORIENTED_EDGE('',*,*,#464,.F.);+#464=EDGE_CURVE('',#465,#461,#390,.T.);+#465=VERTEX_POINT('',#466);+#466=CARTESIAN_POINT('',(3.05,-2.14,0.5));+#467=ORIENTED_EDGE('',*,*,#468,.F.);+#468=EDGE_CURVE('',#469,#465,#390,.T.);+#469=VERTEX_POINT('',#470);+#470=CARTESIAN_POINT('',(3.05,-1.86,0.5));+#471=ORIENTED_EDGE('',*,*,#472,.F.);+#472=EDGE_CURVE('',#473,#469,#390,.T.);+#473=VERTEX_POINT('',#474);+#474=CARTESIAN_POINT('',(3.05,-1.64,0.5));+#475=ORIENTED_EDGE('',*,*,#476,.F.);+#476=EDGE_CURVE('',#477,#473,#390,.T.);+#477=VERTEX_POINT('',#478);+#478=CARTESIAN_POINT('',(3.05,-1.36,0.5));+#479=ORIENTED_EDGE('',*,*,#480,.F.);+#480=EDGE_CURVE('',#481,#477,#390,.T.);+#481=VERTEX_POINT('',#482);+#482=CARTESIAN_POINT('',(3.05,-1.14,0.5));+#483=ORIENTED_EDGE('',*,*,#484,.F.);+#484=EDGE_CURVE('',#485,#481,#390,.T.);+#485=VERTEX_POINT('',#486);+#486=CARTESIAN_POINT('',(3.05,-0.86,0.5));+#487=ORIENTED_EDGE('',*,*,#488,.F.);+#488=EDGE_CURVE('',#489,#485,#390,.T.);+#489=VERTEX_POINT('',#490);+#490=CARTESIAN_POINT('',(3.05,-0.64,0.5));+#491=ORIENTED_EDGE('',*,*,#492,.F.);+#492=EDGE_CURVE('',#493,#489,#390,.T.);+#493=VERTEX_POINT('',#494);+#494=CARTESIAN_POINT('',(3.05,-0.36,0.5));+#495=ORIENTED_EDGE('',*,*,#496,.F.);+#496=EDGE_CURVE('',#497,#493,#390,.T.);+#497=VERTEX_POINT('',#498);+#498=CARTESIAN_POINT('',(3.05,-0.14,0.5));+#499=ORIENTED_EDGE('',*,*,#500,.F.);+#500=EDGE_CURVE('',#501,#497,#390,.T.);+#501=VERTEX_POINT('',#502);+#502=CARTESIAN_POINT('',(3.05,0.14,0.5));+#503=ORIENTED_EDGE('',*,*,#504,.F.);+#504=EDGE_CURVE('',#505,#501,#390,.T.);+#505=VERTEX_POINT('',#506);+#506=CARTESIAN_POINT('',(3.05,0.36,0.5));+#507=ORIENTED_EDGE('',*,*,#508,.F.);+#508=EDGE_CURVE('',#509,#505,#390,.T.);+#509=VERTEX_POINT('',#510);+#510=CARTESIAN_POINT('',(3.05,0.64,0.5));+#511=ORIENTED_EDGE('',*,*,#512,.F.);+#512=EDGE_CURVE('',#513,#509,#390,.T.);+#513=VERTEX_POINT('',#514);+#514=CARTESIAN_POINT('',(3.05,0.86,0.5));+#515=ORIENTED_EDGE('',*,*,#516,.F.);+#516=EDGE_CURVE('',#517,#513,#390,.T.);+#517=VERTEX_POINT('',#518);+#518=CARTESIAN_POINT('',(3.05,1.14,0.5));+#519=ORIENTED_EDGE('',*,*,#520,.F.);+#520=EDGE_CURVE('',#521,#517,#390,.T.);+#521=VERTEX_POINT('',#522);+#522=CARTESIAN_POINT('',(3.05,1.36,0.5));+#523=ORIENTED_EDGE('',*,*,#524,.F.);+#524=EDGE_CURVE('',#525,#521,#390,.T.);+#525=VERTEX_POINT('',#526);+#526=CARTESIAN_POINT('',(3.05,1.64,0.5));+#527=ORIENTED_EDGE('',*,*,#528,.F.);+#528=EDGE_CURVE('',#529,#525,#390,.T.);+#529=VERTEX_POINT('',#530);+#530=CARTESIAN_POINT('',(3.05,1.86,0.5));+#531=ORIENTED_EDGE('',*,*,#532,.F.);+#532=EDGE_CURVE('',#533,#529,#390,.T.);+#533=VERTEX_POINT('',#534);+#534=CARTESIAN_POINT('',(3.05,2.14,0.5));+#535=ORIENTED_EDGE('',*,*,#536,.F.);+#536=EDGE_CURVE('',#537,#533,#390,.T.);+#537=VERTEX_POINT('',#538);+#538=CARTESIAN_POINT('',(3.05,2.36,0.5));+#539=ORIENTED_EDGE('',*,*,#540,.F.);+#540=EDGE_CURVE('',#541,#537,#390,.T.);+#541=VERTEX_POINT('',#542);+#542=CARTESIAN_POINT('',(3.05,2.64,0.5));+#543=ORIENTED_EDGE('',*,*,#544,.F.);+#544=EDGE_CURVE('',#545,#541,#390,.T.);+#545=VERTEX_POINT('',#546);+#546=CARTESIAN_POINT('',(3.05,2.86,0.5));+#547=ORIENTED_EDGE('',*,*,#548,.F.);+#548=EDGE_CURVE('',#549,#545,#390,.T.);+#549=VERTEX_POINT('',#550);+#550=CARTESIAN_POINT('',(3.05,3.14,0.5));+#551=ORIENTED_EDGE('',*,*,#552,.F.);+#552=EDGE_CURVE('',#553,#549,#390,.T.);+#553=VERTEX_POINT('',#554);+#554=CARTESIAN_POINT('',(3.05,3.36,0.5));+#555=ORIENTED_EDGE('',*,*,#556,.F.);+#556=EDGE_CURVE('',#557,#553,#390,.T.);+#557=VERTEX_POINT('',#558);+#558=CARTESIAN_POINT('',(3.05,3.64,0.5));+#559=ORIENTED_EDGE('',*,*,#560,.F.);+#560=EDGE_CURVE('',#561,#557,#390,.T.);+#561=VERTEX_POINT('',#562);+#562=CARTESIAN_POINT('',(3.05,3.86,0.5));+#563=ORIENTED_EDGE('',*,*,#564,.F.);+#564=EDGE_CURVE('',#565,#561,#390,.T.);+#565=VERTEX_POINT('',#566);+#566=CARTESIAN_POINT('',(3.05,4.14,0.5));+#567=ORIENTED_EDGE('',*,*,#568,.F.);+#568=EDGE_CURVE('',#569,#565,#390,.T.);+#569=VERTEX_POINT('',#570);+#570=CARTESIAN_POINT('',(3.05,4.36,0.5));+#571=ORIENTED_EDGE('',*,*,#572,.F.);+#572=EDGE_CURVE('',#573,#569,#390,.T.);+#573=VERTEX_POINT('',#574);+#574=CARTESIAN_POINT('',(3.05,4.64,0.5));+#575=ORIENTED_EDGE('',*,*,#576,.F.);+#576=EDGE_CURVE('',#577,#573,#390,.T.);+#577=VERTEX_POINT('',#578);+#578=CARTESIAN_POINT('',(3.05,4.86,0.5));+#579=ORIENTED_EDGE('',*,*,#580,.F.);+#580=EDGE_CURVE('',#581,#577,#390,.T.);+#581=VERTEX_POINT('',#582);+#582=CARTESIAN_POINT('',(3.05,5.14,0.5));+#583=ORIENTED_EDGE('',*,*,#584,.F.);+#584=EDGE_CURVE('',#585,#581,#390,.T.);+#585=VERTEX_POINT('',#586);+#586=CARTESIAN_POINT('',(3.05,5.36,0.5));+#587=ORIENTED_EDGE('',*,*,#588,.F.);+#588=EDGE_CURVE('',#589,#585,#390,.T.);+#589=VERTEX_POINT('',#590);+#590=CARTESIAN_POINT('',(3.05,5.64,0.5));+#591=ORIENTED_EDGE('',*,*,#592,.F.);+#592=EDGE_CURVE('',#593,#589,#390,.T.);+#593=VERTEX_POINT('',#594);+#594=CARTESIAN_POINT('',(3.05,5.86,0.5));+#595=ORIENTED_EDGE('',*,*,#596,.F.);+#596=EDGE_CURVE('',#597,#593,#390,.T.);+#597=VERTEX_POINT('',#598);+#598=CARTESIAN_POINT('',(3.05,6.14,0.5));+#599=ORIENTED_EDGE('',*,*,#600,.F.);+#600=EDGE_CURVE('',#601,#597,#390,.T.);+#601=VERTEX_POINT('',#602);+#602=CARTESIAN_POINT('',(3.05,6.36,0.5));+#603=ORIENTED_EDGE('',*,*,#604,.F.);+#604=EDGE_CURVE('',#605,#601,#390,.T.);+#605=VERTEX_POINT('',#606);+#606=CARTESIAN_POINT('',(3.05,6.64,0.5));+#607=ORIENTED_EDGE('',*,*,#608,.F.);+#608=EDGE_CURVE('',#609,#605,#390,.T.);+#609=VERTEX_POINT('',#610);+#610=CARTESIAN_POINT('',(3.05,6.86,0.5));+#611=ORIENTED_EDGE('',*,*,#612,.F.);+#612=EDGE_CURVE('',#101,#609,#390,.T.);+#613=ORIENTED_EDGE('',*,*,#100,.F.);+#614=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#49,#102),(#56,#384)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,13.82),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#615=ADVANCED_FACE('',(#616),#627,.F.);+#616=FACE_BOUND('',#617,.F.);+#617=EDGE_LOOP('',(#74,#618,#619,#624));+#618=ORIENTED_EDGE('',*,*,#375,.T.);+#619=ORIENTED_EDGE('',*,*,#620,.F.);+#620=EDGE_CURVE('',#621,#373,#623,.T.);+#621=VERTEX_POINT('',#622);+#622=CARTESIAN_POINT('',(-2.96,-7.,0.5));+#623=LINE('',#622,#79);+#624=ORIENTED_EDGE('',*,*,#625,.F.);+#625=EDGE_CURVE('',#69,#621,#626,.T.);+#626=B_SPLINE_CURVE_WITH_KNOTS('',1,(#70,#622),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#627=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#70,#622),(#77,#150)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.127279220614),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#628=ADVANCED_FACE('',(#629),#640,.F.);+#629=FACE_BOUND('',#630,.F.);+#630=EDGE_LOOP('',(#60,#631,#636,#639));+#631=ORIENTED_EDGE('',*,*,#632,.T.);+#632=EDGE_CURVE('',#62,#633,#635,.T.);+#633=VERTEX_POINT('',#634);+#634=CARTESIAN_POINT('',(2.96,-7.,0.5));+#635=B_SPLINE_CURVE_WITH_KNOTS('',1,(#63,#634),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#636=ORIENTED_EDGE('',*,*,#637,.F.);+#637=EDGE_CURVE('',#383,#633,#638,.T.);+#638=LINE('',#384,#65);+#639=ORIENTED_EDGE('',*,*,#382,.F.);+#640=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#56,#384),(#63,#634)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.127279220614),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#641=ADVANCED_FACE('',(#642),#649,.F.);+#642=FACE_BOUND('',#643,.F.);+#643=EDGE_LOOP('',(#67,#644,#645,#648));+#644=ORIENTED_EDGE('',*,*,#625,.T.);+#645=ORIENTED_EDGE('',*,*,#646,.F.);+#646=EDGE_CURVE('',#633,#621,#647,.T.);+#647=LINE('',#634,#72);+#648=ORIENTED_EDGE('',*,*,#632,.F.);+#649=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#63,#634),(#70,#622)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,5.92),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#650=ADVANCED_FACE('',(#651),#663,.F.);+#651=FACE_BOUND('',#652,.F.);+#652=EDGE_LOOP('',(#653,#654,#659,#662));+#653=ORIENTED_EDGE('',*,*,#105,.T.);+#654=ORIENTED_EDGE('',*,*,#655,.T.);+#655=EDGE_CURVE('',#101,#656,#658,.T.);+#656=VERTEX_POINT('',#657);+#657=CARTESIAN_POINT('',(3.05,6.91,0.65));+#658=B_SPLINE_CURVE_WITH_KNOTS('',1,(#102,#657),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#659=ORIENTED_EDGE('',*,*,#660,.F.);+#660=EDGE_CURVE('',#115,#656,#661,.T.);+#661=LINE('',#116,#51);+#662=ORIENTED_EDGE('',*,*,#114,.F.);+#663=PLANE('',#664);+#664=AXIS2_PLACEMENT_3D('',#116,#66,#52);+#665=ADVANCED_FACE('',(#666),#724,.F.);+#666=FACE_BOUND('',#667,.F.);+#667=EDGE_LOOP('',(#668,#673,#674,#675,#680,#686,#691,#696,#701,#706,#712,#720));+#668=ORIENTED_EDGE('',*,*,#669,.T.);+#669=EDGE_CURVE('',#670,#120,#672,.T.);+#670=VERTEX_POINT('',#671);+#671=CARTESIAN_POINT('',(-3.05,6.91,0.65));+#672=LINE('',#671,#91);+#673=ORIENTED_EDGE('',*,*,#119,.T.);+#674=ORIENTED_EDGE('',*,*,#660,.T.);+#675=ORIENTED_EDGE('',*,*,#676,.T.);+#676=EDGE_CURVE('',#656,#677,#679,.T.);+#677=VERTEX_POINT('',#678);+#678=CARTESIAN_POINT('',(3.05,6.86,0.65));+#679=LINE('',#657,#58);+#680=ORIENTED_EDGE('',*,*,#681,.T.);+#681=EDGE_CURVE('',#677,#682,#684,.T.);+#682=VERTEX_POINT('',#683);+#683=CARTESIAN_POINT('',(3.,6.86,0.65));+#684=LINE('',#685,#72);+#685=CARTESIAN_POINT('',(3.25,6.86,0.65));+#686=ORIENTED_EDGE('',*,*,#687,.F.);+#687=EDGE_CURVE('',#688,#682,#690,.T.);+#688=VERTEX_POINT('',#689);+#689=CARTESIAN_POINT('',(3.,6.885,0.65));+#690=LINE('',#689,#58);+#691=ORIENTED_EDGE('',*,*,#692,.F.);+#692=EDGE_CURVE('',#693,#688,#695,.T.);+#693=VERTEX_POINT('',#694);+#694=CARTESIAN_POINT('',(2.935,6.95,0.65));+#695=LINE('',#694,#51);+#696=ORIENTED_EDGE('',*,*,#697,.F.);+#697=EDGE_CURVE('',#698,#693,#700,.T.);+#698=VERTEX_POINT('',#699);+#699=CARTESIAN_POINT('',(-2.935,6.95,0.65));+#700=LINE('',#699,#27);+#701=ORIENTED_EDGE('',*,*,#702,.F.);+#702=EDGE_CURVE('',#703,#698,#705,.T.);+#703=VERTEX_POINT('',#704);+#704=CARTESIAN_POINT('',(-3.,6.885,0.65));+#705=LINE('',#704,#91);+#706=ORIENTED_EDGE('',*,*,#707,.F.);+#707=EDGE_CURVE('',#708,#703,#710,.T.);+#708=VERTEX_POINT('',#709);+#709=CARTESIAN_POINT('',(-3.,6.86,0.65));+#710=LINE('',#711,#86);+#711=CARTESIAN_POINT('',(-3.,-6.885,0.65));+#712=ORIENTED_EDGE('',*,*,#713,.F.);+#713=EDGE_CURVE('',#714,#708,#716,.T.);+#714=VERTEX_POINT('',#715);+#715=CARTESIAN_POINT('',(-3.05,6.86,0.65));+#716=LINE('',#717,#718);+#717=CARTESIAN_POINT('',(-3.25,6.86,0.65));+#718=VECTOR('',#719,1.);+#719=DIRECTION('',(1.,-1.144237745222E-17,0.));+#720=ORIENTED_EDGE('',*,*,#721,.T.);+#721=EDGE_CURVE('',#714,#670,#722,.T.);+#722=LINE('',#723,#86);+#723=CARTESIAN_POINT('',(-3.05,-6.91,0.65));+#724=PLANE('',#725);+#725=AXIS2_PLACEMENT_3D('',#726,#727,#728);+#726=CARTESIAN_POINT('',(-8.294329410624E-16,6.975,0.65));+#727=DIRECTION('',(-1.027263509324E-17,9.691555975074E-27,-1.));+#728=DIRECTION('',(1.,1.359749808472E-16,-1.027263509324E-17));+#729=ADVANCED_FACE('',(#730),#738,.F.);+#730=FACE_BOUND('',#731,.F.);+#731=EDGE_LOOP('',(#732,#733,#734,#735));+#732=ORIENTED_EDGE('',*,*,#133,.T.);+#733=ORIENTED_EDGE('',*,*,#124,.T.);+#734=ORIENTED_EDGE('',*,*,#669,.F.);+#735=ORIENTED_EDGE('',*,*,#736,.F.);+#736=EDGE_CURVE('',#134,#670,#737,.T.);+#737=B_SPLINE_CURVE_WITH_KNOTS('',1,(#135,#671),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#738=PLANE('',#739);+#739=AXIS2_PLACEMENT_3D('',#671,#52,#92);+#740=ADVANCED_FACE('',(#741),#757,.F.);+#741=FACE_BOUND('',#742,.F.);+#742=EDGE_LOOP('',(#743,#747,#748,#755));+#743=ORIENTED_EDGE('',*,*,#744,.F.);+#744=EDGE_CURVE('',#373,#745,#746,.T.);+#745=VERTEX_POINT('',#723);+#746=B_SPLINE_CURVE_WITH_KNOTS('',1,(#150,#723),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#747=ORIENTED_EDGE('',*,*,#372,.T.);+#748=ORIENTED_EDGE('',*,*,#749,.T.);+#749=EDGE_CURVE('',#369,#750,#752,.T.);+#750=VERTEX_POINT('',#751);+#751=CARTESIAN_POINT('',(-3.05,-6.86,0.65));+#752=LINE('',#753,#754);+#753=CARTESIAN_POINT('',(-3.05,-6.86,0.477669411398));+#754=VECTOR('',#13,1.);+#755=ORIENTED_EDGE('',*,*,#756,.F.);+#756=EDGE_CURVE('',#745,#750,#722,.T.);+#757=PLANE('',#758);+#758=AXIS2_PLACEMENT_3D('',#723,#28,#87);+#759=ADVANCED_FACE('',(#760),#782,.F.);+#760=FACE_BOUND('',#761,.F.);+#761=EDGE_LOOP('',(#762,#770,#771,#777));+#762=ORIENTED_EDGE('',*,*,#763,.F.);+#763=EDGE_CURVE('',#369,#764,#766,.T.);+#764=VERTEX_POINT('',#765);+#765=CARTESIAN_POINT('',(-3.25,-6.86,0.5));+#766=LINE('',#767,#768);+#767=CARTESIAN_POINT('',(-2.95,-6.86,0.5));+#768=VECTOR('',#769,1.);+#769=DIRECTION('',(-1.,1.144237745222E-17,0.));+#770=ORIENTED_EDGE('',*,*,#368,.T.);+#771=ORIENTED_EDGE('',*,*,#772,.T.);+#772=EDGE_CURVE('',#365,#773,#775,.T.);+#773=VERTEX_POINT('',#774);+#774=CARTESIAN_POINT('',(-3.25,-6.64,0.5));+#775=LINE('',#776,#768);+#776=CARTESIAN_POINT('',(-2.95,-6.64,0.5));+#777=ORIENTED_EDGE('',*,*,#778,.F.);+#778=EDGE_CURVE('',#764,#773,#779,.T.);+#779=LINE('',#765,#780);+#780=VECTOR('',#781,1.);+#781=DIRECTION('',(1.144237745222E-17,1.,0.));+#782=PLANE('',#783);+#783=AXIS2_PLACEMENT_3D('',#767,#13,#769);+#784=ADVANCED_FACE('',(#785),#757,.F.);+#785=FACE_BOUND('',#786,.F.);+#786=EDGE_LOOP('',(#787,#793,#794,#800));+#787=ORIENTED_EDGE('',*,*,#788,.F.);+#788=EDGE_CURVE('',#365,#789,#791,.T.);+#789=VERTEX_POINT('',#790);+#790=CARTESIAN_POINT('',(-3.05,-6.64,0.65));+#791=LINE('',#792,#754);+#792=CARTESIAN_POINT('',(-3.05,-6.64,0.477669411398));+#793=ORIENTED_EDGE('',*,*,#364,.T.);+#794=ORIENTED_EDGE('',*,*,#795,.T.);+#795=EDGE_CURVE('',#361,#796,#798,.T.);+#796=VERTEX_POINT('',#797);+#797=CARTESIAN_POINT('',(-3.05,-6.36,0.65));+#798=LINE('',#799,#754);+#799=CARTESIAN_POINT('',(-3.05,-6.36,0.477669411398));+#800=ORIENTED_EDGE('',*,*,#801,.F.);+#801=EDGE_CURVE('',#789,#796,#722,.T.);+#802=ADVANCED_FACE('',(#803),#821,.F.);+#803=FACE_BOUND('',#804,.F.);+#804=EDGE_LOOP('',(#805,#811,#812,#818));+#805=ORIENTED_EDGE('',*,*,#806,.F.);+#806=EDGE_CURVE('',#361,#807,#809,.T.);+#807=VERTEX_POINT('',#808);+#808=CARTESIAN_POINT('',(-3.25,-6.36,0.5));+#809=LINE('',#810,#768);+#810=CARTESIAN_POINT('',(-2.95,-6.36,0.5));+#811=ORIENTED_EDGE('',*,*,#360,.T.);+#812=ORIENTED_EDGE('',*,*,#813,.T.);+#813=EDGE_CURVE('',#357,#814,#816,.T.);+#814=VERTEX_POINT('',#815);+#815=CARTESIAN_POINT('',(-3.25,-6.14,0.5));+#816=LINE('',#817,#768);+#817=CARTESIAN_POINT('',(-2.95,-6.14,0.5));+#818=ORIENTED_EDGE('',*,*,#819,.F.);+#819=EDGE_CURVE('',#807,#814,#820,.T.);+#820=LINE('',#808,#780);+#821=PLANE('',#822);+#822=AXIS2_PLACEMENT_3D('',#810,#13,#769);+#823=ADVANCED_FACE('',(#824),#757,.F.);+#824=FACE_BOUND('',#825,.F.);+#825=EDGE_LOOP('',(#826,#832,#833,#839));+#826=ORIENTED_EDGE('',*,*,#827,.F.);+#827=EDGE_CURVE('',#357,#828,#830,.T.);+#828=VERTEX_POINT('',#829);+#829=CARTESIAN_POINT('',(-3.05,-6.14,0.65));+#830=LINE('',#831,#754);+#831=CARTESIAN_POINT('',(-3.05,-6.14,0.477669411398));+#832=ORIENTED_EDGE('',*,*,#356,.T.);+#833=ORIENTED_EDGE('',*,*,#834,.T.);+#834=EDGE_CURVE('',#353,#835,#837,.T.);+#835=VERTEX_POINT('',#836);+#836=CARTESIAN_POINT('',(-3.05,-5.86,0.65));+#837=LINE('',#838,#754);+#838=CARTESIAN_POINT('',(-3.05,-5.86,0.477669411398));+#839=ORIENTED_EDGE('',*,*,#840,.F.);+#840=EDGE_CURVE('',#828,#835,#722,.T.);+#841=ADVANCED_FACE('',(#842),#860,.F.);+#842=FACE_BOUND('',#843,.F.);+#843=EDGE_LOOP('',(#844,#850,#851,#857));+#844=ORIENTED_EDGE('',*,*,#845,.F.);+#845=EDGE_CURVE('',#353,#846,#848,.T.);+#846=VERTEX_POINT('',#847);+#847=CARTESIAN_POINT('',(-3.25,-5.86,0.5));+#848=LINE('',#849,#768);+#849=CARTESIAN_POINT('',(-2.95,-5.86,0.5));+#850=ORIENTED_EDGE('',*,*,#352,.T.);+#851=ORIENTED_EDGE('',*,*,#852,.T.);+#852=EDGE_CURVE('',#349,#853,#855,.T.);+#853=VERTEX_POINT('',#854);+#854=CARTESIAN_POINT('',(-3.25,-5.64,0.5));+#855=LINE('',#856,#768);+#856=CARTESIAN_POINT('',(-2.95,-5.64,0.5));+#857=ORIENTED_EDGE('',*,*,#858,.F.);+#858=EDGE_CURVE('',#846,#853,#859,.T.);+#859=LINE('',#847,#780);+#860=PLANE('',#861);+#861=AXIS2_PLACEMENT_3D('',#849,#13,#769);+#862=ADVANCED_FACE('',(#863),#757,.F.);+#863=FACE_BOUND('',#864,.F.);+#864=EDGE_LOOP('',(#865,#871,#872,#878));+#865=ORIENTED_EDGE('',*,*,#866,.F.);+#866=EDGE_CURVE('',#349,#867,#869,.T.);+#867=VERTEX_POINT('',#868);+#868=CARTESIAN_POINT('',(-3.05,-5.64,0.65));+#869=LINE('',#870,#754);+#870=CARTESIAN_POINT('',(-3.05,-5.64,0.477669411398));+#871=ORIENTED_EDGE('',*,*,#348,.T.);+#872=ORIENTED_EDGE('',*,*,#873,.T.);+#873=EDGE_CURVE('',#345,#874,#876,.T.);+#874=VERTEX_POINT('',#875);+#875=CARTESIAN_POINT('',(-3.05,-5.36,0.65));+#876=LINE('',#877,#754);+#877=CARTESIAN_POINT('',(-3.05,-5.36,0.477669411398));+#878=ORIENTED_EDGE('',*,*,#879,.F.);+#879=EDGE_CURVE('',#867,#874,#722,.T.);+#880=ADVANCED_FACE('',(#881),#899,.F.);+#881=FACE_BOUND('',#882,.F.);+#882=EDGE_LOOP('',(#883,#889,#890,#896));+#883=ORIENTED_EDGE('',*,*,#884,.F.);+#884=EDGE_CURVE('',#345,#885,#887,.T.);+#885=VERTEX_POINT('',#886);+#886=CARTESIAN_POINT('',(-3.25,-5.36,0.5));+#887=LINE('',#888,#768);+#888=CARTESIAN_POINT('',(-2.95,-5.36,0.5));+#889=ORIENTED_EDGE('',*,*,#344,.T.);+#890=ORIENTED_EDGE('',*,*,#891,.T.);+#891=EDGE_CURVE('',#341,#892,#894,.T.);+#892=VERTEX_POINT('',#893);+#893=CARTESIAN_POINT('',(-3.25,-5.14,0.5));+#894=LINE('',#895,#768);+#895=CARTESIAN_POINT('',(-2.95,-5.14,0.5));+#896=ORIENTED_EDGE('',*,*,#897,.F.);+#897=EDGE_CURVE('',#885,#892,#898,.T.);+#898=LINE('',#886,#780);+#899=PLANE('',#900);+#900=AXIS2_PLACEMENT_3D('',#888,#13,#769);+#901=ADVANCED_FACE('',(#902),#757,.F.);+#902=FACE_BOUND('',#903,.F.);+#903=EDGE_LOOP('',(#904,#910,#911,#917));+#904=ORIENTED_EDGE('',*,*,#905,.F.);+#905=EDGE_CURVE('',#341,#906,#908,.T.);+#906=VERTEX_POINT('',#907);+#907=CARTESIAN_POINT('',(-3.05,-5.14,0.65));+#908=LINE('',#909,#754);+#909=CARTESIAN_POINT('',(-3.05,-5.14,0.477669411398));+#910=ORIENTED_EDGE('',*,*,#340,.T.);+#911=ORIENTED_EDGE('',*,*,#912,.T.);+#912=EDGE_CURVE('',#337,#913,#915,.T.);+#913=VERTEX_POINT('',#914);+#914=CARTESIAN_POINT('',(-3.05,-4.86,0.65));+#915=LINE('',#916,#754);+#916=CARTESIAN_POINT('',(-3.05,-4.86,0.477669411398));+#917=ORIENTED_EDGE('',*,*,#918,.F.);+#918=EDGE_CURVE('',#906,#913,#722,.T.);+#919=ADVANCED_FACE('',(#920),#938,.F.);+#920=FACE_BOUND('',#921,.F.);+#921=EDGE_LOOP('',(#922,#928,#929,#935));+#922=ORIENTED_EDGE('',*,*,#923,.F.);+#923=EDGE_CURVE('',#337,#924,#926,.T.);+#924=VERTEX_POINT('',#925);+#925=CARTESIAN_POINT('',(-3.25,-4.86,0.5));+#926=LINE('',#927,#768);+#927=CARTESIAN_POINT('',(-2.95,-4.86,0.5));+#928=ORIENTED_EDGE('',*,*,#336,.T.);+#929=ORIENTED_EDGE('',*,*,#930,.T.);+#930=EDGE_CURVE('',#333,#931,#933,.T.);+#931=VERTEX_POINT('',#932);+#932=CARTESIAN_POINT('',(-3.25,-4.64,0.5));+#933=LINE('',#934,#768);+#934=CARTESIAN_POINT('',(-2.95,-4.64,0.5));+#935=ORIENTED_EDGE('',*,*,#936,.F.);+#936=EDGE_CURVE('',#924,#931,#937,.T.);+#937=LINE('',#925,#780);+#938=PLANE('',#939);+#939=AXIS2_PLACEMENT_3D('',#927,#13,#769);+#940=ADVANCED_FACE('',(#941),#757,.F.);+#941=FACE_BOUND('',#942,.F.);+#942=EDGE_LOOP('',(#943,#949,#950,#956));+#943=ORIENTED_EDGE('',*,*,#944,.F.);+#944=EDGE_CURVE('',#333,#945,#947,.T.);+#945=VERTEX_POINT('',#946);+#946=CARTESIAN_POINT('',(-3.05,-4.64,0.65));+#947=LINE('',#948,#754);+#948=CARTESIAN_POINT('',(-3.05,-4.64,0.477669411398));+#949=ORIENTED_EDGE('',*,*,#332,.T.);+#950=ORIENTED_EDGE('',*,*,#951,.T.);+#951=EDGE_CURVE('',#329,#952,#954,.T.);+#952=VERTEX_POINT('',#953);+#953=CARTESIAN_POINT('',(-3.05,-4.36,0.65));+#954=LINE('',#955,#754);+#955=CARTESIAN_POINT('',(-3.05,-4.36,0.477669411398));+#956=ORIENTED_EDGE('',*,*,#957,.F.);+#957=EDGE_CURVE('',#945,#952,#722,.T.);+#958=ADVANCED_FACE('',(#959),#977,.F.);+#959=FACE_BOUND('',#960,.F.);+#960=EDGE_LOOP('',(#961,#967,#968,#974));+#961=ORIENTED_EDGE('',*,*,#962,.F.);+#962=EDGE_CURVE('',#329,#963,#965,.T.);+#963=VERTEX_POINT('',#964);+#964=CARTESIAN_POINT('',(-3.25,-4.36,0.5));+#965=LINE('',#966,#768);+#966=CARTESIAN_POINT('',(-2.95,-4.36,0.5));+#967=ORIENTED_EDGE('',*,*,#328,.T.);+#968=ORIENTED_EDGE('',*,*,#969,.T.);+#969=EDGE_CURVE('',#325,#970,#972,.T.);+#970=VERTEX_POINT('',#971);+#971=CARTESIAN_POINT('',(-3.25,-4.14,0.5));+#972=LINE('',#973,#768);+#973=CARTESIAN_POINT('',(-2.95,-4.14,0.5));+#974=ORIENTED_EDGE('',*,*,#975,.F.);+#975=EDGE_CURVE('',#963,#970,#976,.T.);+#976=LINE('',#964,#780);+#977=PLANE('',#978);+#978=AXIS2_PLACEMENT_3D('',#966,#13,#769);+#979=ADVANCED_FACE('',(#980),#757,.F.);+#980=FACE_BOUND('',#981,.F.);+#981=EDGE_LOOP('',(#982,#988,#989,#995));+#982=ORIENTED_EDGE('',*,*,#983,.F.);+#983=EDGE_CURVE('',#325,#984,#986,.T.);+#984=VERTEX_POINT('',#985);+#985=CARTESIAN_POINT('',(-3.05,-4.14,0.65));+#986=LINE('',#987,#754);+#987=CARTESIAN_POINT('',(-3.05,-4.14,0.477669411398));+#988=ORIENTED_EDGE('',*,*,#324,.T.);+#989=ORIENTED_EDGE('',*,*,#990,.T.);+#990=EDGE_CURVE('',#321,#991,#993,.T.);+#991=VERTEX_POINT('',#992);+#992=CARTESIAN_POINT('',(-3.05,-3.86,0.65));+#993=LINE('',#994,#754);+#994=CARTESIAN_POINT('',(-3.05,-3.86,0.477669411398));+#995=ORIENTED_EDGE('',*,*,#996,.F.);+#996=EDGE_CURVE('',#984,#991,#722,.T.);+#997=ADVANCED_FACE('',(#998),#1016,.F.);+#998=FACE_BOUND('',#999,.F.);+#999=EDGE_LOOP('',(#1000,#1006,#1007,#1013));+#1000=ORIENTED_EDGE('',*,*,#1001,.F.);+#1001=EDGE_CURVE('',#321,#1002,#1004,.T.);+#1002=VERTEX_POINT('',#1003);+#1003=CARTESIAN_POINT('',(-3.25,-3.86,0.5));+#1004=LINE('',#1005,#768);+#1005=CARTESIAN_POINT('',(-2.95,-3.86,0.5));+#1006=ORIENTED_EDGE('',*,*,#320,.T.);+#1007=ORIENTED_EDGE('',*,*,#1008,.T.);+#1008=EDGE_CURVE('',#317,#1009,#1011,.T.);+#1009=VERTEX_POINT('',#1010);+#1010=CARTESIAN_POINT('',(-3.25,-3.64,0.5));+#1011=LINE('',#1012,#768);+#1012=CARTESIAN_POINT('',(-2.95,-3.64,0.5));+#1013=ORIENTED_EDGE('',*,*,#1014,.F.);+#1014=EDGE_CURVE('',#1002,#1009,#1015,.T.);+#1015=LINE('',#1003,#780);+#1016=PLANE('',#1017);+#1017=AXIS2_PLACEMENT_3D('',#1005,#13,#769);+#1018=ADVANCED_FACE('',(#1019),#757,.F.);+#1019=FACE_BOUND('',#1020,.F.);+#1020=EDGE_LOOP('',(#1021,#1027,#1028,#1034));+#1021=ORIENTED_EDGE('',*,*,#1022,.F.);+#1022=EDGE_CURVE('',#317,#1023,#1025,.T.);+#1023=VERTEX_POINT('',#1024);+#1024=CARTESIAN_POINT('',(-3.05,-3.64,0.65));+#1025=LINE('',#1026,#754);+#1026=CARTESIAN_POINT('',(-3.05,-3.64,0.477669411398));+#1027=ORIENTED_EDGE('',*,*,#316,.T.);+#1028=ORIENTED_EDGE('',*,*,#1029,.T.);+#1029=EDGE_CURVE('',#313,#1030,#1032,.T.);+#1030=VERTEX_POINT('',#1031);+#1031=CARTESIAN_POINT('',(-3.05,-3.36,0.65));+#1032=LINE('',#1033,#754);+#1033=CARTESIAN_POINT('',(-3.05,-3.36,0.477669411398));+#1034=ORIENTED_EDGE('',*,*,#1035,.F.);+#1035=EDGE_CURVE('',#1023,#1030,#722,.T.);+#1036=ADVANCED_FACE('',(#1037),#1055,.F.);+#1037=FACE_BOUND('',#1038,.F.);+#1038=EDGE_LOOP('',(#1039,#1045,#1046,#1052));+#1039=ORIENTED_EDGE('',*,*,#1040,.F.);+#1040=EDGE_CURVE('',#313,#1041,#1043,.T.);+#1041=VERTEX_POINT('',#1042);+#1042=CARTESIAN_POINT('',(-3.25,-3.36,0.5));+#1043=LINE('',#1044,#768);+#1044=CARTESIAN_POINT('',(-2.95,-3.36,0.5));+#1045=ORIENTED_EDGE('',*,*,#312,.T.);+#1046=ORIENTED_EDGE('',*,*,#1047,.T.);+#1047=EDGE_CURVE('',#309,#1048,#1050,.T.);+#1048=VERTEX_POINT('',#1049);+#1049=CARTESIAN_POINT('',(-3.25,-3.14,0.5));+#1050=LINE('',#1051,#768);+#1051=CARTESIAN_POINT('',(-2.95,-3.14,0.5));+#1052=ORIENTED_EDGE('',*,*,#1053,.F.);+#1053=EDGE_CURVE('',#1041,#1048,#1054,.T.);+#1054=LINE('',#1042,#780);+#1055=PLANE('',#1056);+#1056=AXIS2_PLACEMENT_3D('',#1044,#13,#769);+#1057=ADVANCED_FACE('',(#1058),#757,.F.);+#1058=FACE_BOUND('',#1059,.F.);+#1059=EDGE_LOOP('',(#1060,#1066,#1067,#1073));+#1060=ORIENTED_EDGE('',*,*,#1061,.F.);+#1061=EDGE_CURVE('',#309,#1062,#1064,.T.);+#1062=VERTEX_POINT('',#1063);+#1063=CARTESIAN_POINT('',(-3.05,-3.14,0.65));+#1064=LINE('',#1065,#754);+#1065=CARTESIAN_POINT('',(-3.05,-3.14,0.477669411398));+#1066=ORIENTED_EDGE('',*,*,#308,.T.);+#1067=ORIENTED_EDGE('',*,*,#1068,.T.);+#1068=EDGE_CURVE('',#305,#1069,#1071,.T.);+#1069=VERTEX_POINT('',#1070);+#1070=CARTESIAN_POINT('',(-3.05,-2.86,0.65));+#1071=LINE('',#1072,#754);+#1072=CARTESIAN_POINT('',(-3.05,-2.86,0.477669411398));+#1073=ORIENTED_EDGE('',*,*,#1074,.F.);+#1074=EDGE_CURVE('',#1062,#1069,#722,.T.);+#1075=ADVANCED_FACE('',(#1076),#1094,.F.);+#1076=FACE_BOUND('',#1077,.F.);+#1077=EDGE_LOOP('',(#1078,#1084,#1085,#1091));+#1078=ORIENTED_EDGE('',*,*,#1079,.F.);+#1079=EDGE_CURVE('',#305,#1080,#1082,.T.);+#1080=VERTEX_POINT('',#1081);+#1081=CARTESIAN_POINT('',(-3.25,-2.86,0.5));+#1082=LINE('',#1083,#768);+#1083=CARTESIAN_POINT('',(-2.95,-2.86,0.5));+#1084=ORIENTED_EDGE('',*,*,#304,.T.);+#1085=ORIENTED_EDGE('',*,*,#1086,.T.);+#1086=EDGE_CURVE('',#301,#1087,#1089,.T.);+#1087=VERTEX_POINT('',#1088);+#1088=CARTESIAN_POINT('',(-3.25,-2.64,0.5));+#1089=LINE('',#1090,#768);+#1090=CARTESIAN_POINT('',(-2.95,-2.64,0.5));+#1091=ORIENTED_EDGE('',*,*,#1092,.F.);+#1092=EDGE_CURVE('',#1080,#1087,#1093,.T.);+#1093=LINE('',#1081,#780);+#1094=PLANE('',#1095);+#1095=AXIS2_PLACEMENT_3D('',#1083,#13,#769);+#1096=ADVANCED_FACE('',(#1097),#757,.F.);+#1097=FACE_BOUND('',#1098,.F.);+#1098=EDGE_LOOP('',(#1099,#1105,#1106,#1112));+#1099=ORIENTED_EDGE('',*,*,#1100,.F.);+#1100=EDGE_CURVE('',#301,#1101,#1103,.T.);+#1101=VERTEX_POINT('',#1102);+#1102=CARTESIAN_POINT('',(-3.05,-2.64,0.65));+#1103=LINE('',#1104,#754);+#1104=CARTESIAN_POINT('',(-3.05,-2.64,0.477669411398));+#1105=ORIENTED_EDGE('',*,*,#300,.T.);+#1106=ORIENTED_EDGE('',*,*,#1107,.T.);+#1107=EDGE_CURVE('',#297,#1108,#1110,.T.);+#1108=VERTEX_POINT('',#1109);+#1109=CARTESIAN_POINT('',(-3.05,-2.36,0.65));+#1110=LINE('',#1111,#754);+#1111=CARTESIAN_POINT('',(-3.05,-2.36,0.477669411398));+#1112=ORIENTED_EDGE('',*,*,#1113,.F.);+#1113=EDGE_CURVE('',#1101,#1108,#722,.T.);+#1114=ADVANCED_FACE('',(#1115),#1133,.F.);+#1115=FACE_BOUND('',#1116,.F.);+#1116=EDGE_LOOP('',(#1117,#1123,#1124,#1130));+#1117=ORIENTED_EDGE('',*,*,#1118,.F.);+#1118=EDGE_CURVE('',#297,#1119,#1121,.T.);+#1119=VERTEX_POINT('',#1120);+#1120=CARTESIAN_POINT('',(-3.25,-2.36,0.5));+#1121=LINE('',#1122,#768);+#1122=CARTESIAN_POINT('',(-2.95,-2.36,0.5));+#1123=ORIENTED_EDGE('',*,*,#296,.T.);+#1124=ORIENTED_EDGE('',*,*,#1125,.T.);+#1125=EDGE_CURVE('',#293,#1126,#1128,.T.);+#1126=VERTEX_POINT('',#1127);+#1127=CARTESIAN_POINT('',(-3.25,-2.14,0.5));+#1128=LINE('',#1129,#768);+#1129=CARTESIAN_POINT('',(-2.95,-2.14,0.5));+#1130=ORIENTED_EDGE('',*,*,#1131,.F.);+#1131=EDGE_CURVE('',#1119,#1126,#1132,.T.);+#1132=LINE('',#1120,#780);+#1133=PLANE('',#1134);+#1134=AXIS2_PLACEMENT_3D('',#1122,#13,#769);+#1135=ADVANCED_FACE('',(#1136),#757,.F.);+#1136=FACE_BOUND('',#1137,.F.);+#1137=EDGE_LOOP('',(#1138,#1144,#1145,#1151));+#1138=ORIENTED_EDGE('',*,*,#1139,.F.);+#1139=EDGE_CURVE('',#293,#1140,#1142,.T.);+#1140=VERTEX_POINT('',#1141);+#1141=CARTESIAN_POINT('',(-3.05,-2.14,0.65));+#1142=LINE('',#1143,#754);+#1143=CARTESIAN_POINT('',(-3.05,-2.14,0.477669411398));+#1144=ORIENTED_EDGE('',*,*,#292,.T.);+#1145=ORIENTED_EDGE('',*,*,#1146,.T.);+#1146=EDGE_CURVE('',#289,#1147,#1149,.T.);+#1147=VERTEX_POINT('',#1148);+#1148=CARTESIAN_POINT('',(-3.05,-1.86,0.65));+#1149=LINE('',#1150,#754);+#1150=CARTESIAN_POINT('',(-3.05,-1.86,0.477669411398));+#1151=ORIENTED_EDGE('',*,*,#1152,.F.);+#1152=EDGE_CURVE('',#1140,#1147,#722,.T.);+#1153=ADVANCED_FACE('',(#1154),#1172,.F.);+#1154=FACE_BOUND('',#1155,.F.);+#1155=EDGE_LOOP('',(#1156,#1162,#1163,#1169));+#1156=ORIENTED_EDGE('',*,*,#1157,.F.);+#1157=EDGE_CURVE('',#289,#1158,#1160,.T.);+#1158=VERTEX_POINT('',#1159);+#1159=CARTESIAN_POINT('',(-3.25,-1.86,0.5));+#1160=LINE('',#1161,#768);+#1161=CARTESIAN_POINT('',(-2.95,-1.86,0.5));+#1162=ORIENTED_EDGE('',*,*,#288,.T.);+#1163=ORIENTED_EDGE('',*,*,#1164,.T.);+#1164=EDGE_CURVE('',#285,#1165,#1167,.T.);+#1165=VERTEX_POINT('',#1166);+#1166=CARTESIAN_POINT('',(-3.25,-1.64,0.5));+#1167=LINE('',#1168,#768);+#1168=CARTESIAN_POINT('',(-2.95,-1.64,0.5));+#1169=ORIENTED_EDGE('',*,*,#1170,.F.);+#1170=EDGE_CURVE('',#1158,#1165,#1171,.T.);+#1171=LINE('',#1159,#780);+#1172=PLANE('',#1173);+#1173=AXIS2_PLACEMENT_3D('',#1161,#13,#769);+#1174=ADVANCED_FACE('',(#1175),#757,.F.);+#1175=FACE_BOUND('',#1176,.F.);+#1176=EDGE_LOOP('',(#1177,#1183,#1184,#1190));+#1177=ORIENTED_EDGE('',*,*,#1178,.F.);+#1178=EDGE_CURVE('',#285,#1179,#1181,.T.);+#1179=VERTEX_POINT('',#1180);+#1180=CARTESIAN_POINT('',(-3.05,-1.64,0.65));+#1181=LINE('',#1182,#754);+#1182=CARTESIAN_POINT('',(-3.05,-1.64,0.477669411398));+#1183=ORIENTED_EDGE('',*,*,#284,.T.);+#1184=ORIENTED_EDGE('',*,*,#1185,.T.);+#1185=EDGE_CURVE('',#281,#1186,#1188,.T.);+#1186=VERTEX_POINT('',#1187);+#1187=CARTESIAN_POINT('',(-3.05,-1.36,0.65));+#1188=LINE('',#1189,#754);+#1189=CARTESIAN_POINT('',(-3.05,-1.36,0.477669411398));+#1190=ORIENTED_EDGE('',*,*,#1191,.F.);+#1191=EDGE_CURVE('',#1179,#1186,#722,.T.);+#1192=ADVANCED_FACE('',(#1193),#1211,.F.);+#1193=FACE_BOUND('',#1194,.F.);+#1194=EDGE_LOOP('',(#1195,#1201,#1202,#1208));+#1195=ORIENTED_EDGE('',*,*,#1196,.F.);+#1196=EDGE_CURVE('',#281,#1197,#1199,.T.);+#1197=VERTEX_POINT('',#1198);+#1198=CARTESIAN_POINT('',(-3.25,-1.36,0.5));+#1199=LINE('',#1200,#768);+#1200=CARTESIAN_POINT('',(-2.95,-1.36,0.5));+#1201=ORIENTED_EDGE('',*,*,#280,.T.);+#1202=ORIENTED_EDGE('',*,*,#1203,.T.);+#1203=EDGE_CURVE('',#277,#1204,#1206,.T.);+#1204=VERTEX_POINT('',#1205);+#1205=CARTESIAN_POINT('',(-3.25,-1.14,0.5));+#1206=LINE('',#1207,#768);+#1207=CARTESIAN_POINT('',(-2.95,-1.14,0.5));+#1208=ORIENTED_EDGE('',*,*,#1209,.F.);+#1209=EDGE_CURVE('',#1197,#1204,#1210,.T.);+#1210=LINE('',#1198,#780);+#1211=PLANE('',#1212);+#1212=AXIS2_PLACEMENT_3D('',#1200,#13,#769);+#1213=ADVANCED_FACE('',(#1214),#757,.F.);+#1214=FACE_BOUND('',#1215,.F.);+#1215=EDGE_LOOP('',(#1216,#1222,#1223,#1229));+#1216=ORIENTED_EDGE('',*,*,#1217,.F.);+#1217=EDGE_CURVE('',#277,#1218,#1220,.T.);+#1218=VERTEX_POINT('',#1219);+#1219=CARTESIAN_POINT('',(-3.05,-1.14,0.65));+#1220=LINE('',#1221,#754);+#1221=CARTESIAN_POINT('',(-3.05,-1.14,0.477669411398));+#1222=ORIENTED_EDGE('',*,*,#276,.T.);+#1223=ORIENTED_EDGE('',*,*,#1224,.T.);+#1224=EDGE_CURVE('',#273,#1225,#1227,.T.);+#1225=VERTEX_POINT('',#1226);+#1226=CARTESIAN_POINT('',(-3.05,-0.86,0.65));+#1227=LINE('',#1228,#754);+#1228=CARTESIAN_POINT('',(-3.05,-0.86,0.477669411398));+#1229=ORIENTED_EDGE('',*,*,#1230,.F.);+#1230=EDGE_CURVE('',#1218,#1225,#722,.T.);+#1231=ADVANCED_FACE('',(#1232),#1250,.F.);+#1232=FACE_BOUND('',#1233,.F.);+#1233=EDGE_LOOP('',(#1234,#1240,#1241,#1247));+#1234=ORIENTED_EDGE('',*,*,#1235,.F.);+#1235=EDGE_CURVE('',#273,#1236,#1238,.T.);+#1236=VERTEX_POINT('',#1237);+#1237=CARTESIAN_POINT('',(-3.25,-0.86,0.5));+#1238=LINE('',#1239,#768);+#1239=CARTESIAN_POINT('',(-2.95,-0.86,0.5));+#1240=ORIENTED_EDGE('',*,*,#272,.T.);+#1241=ORIENTED_EDGE('',*,*,#1242,.T.);+#1242=EDGE_CURVE('',#269,#1243,#1245,.T.);+#1243=VERTEX_POINT('',#1244);+#1244=CARTESIAN_POINT('',(-3.25,-0.64,0.5));+#1245=LINE('',#1246,#768);+#1246=CARTESIAN_POINT('',(-2.95,-0.64,0.5));+#1247=ORIENTED_EDGE('',*,*,#1248,.F.);+#1248=EDGE_CURVE('',#1236,#1243,#1249,.T.);+#1249=LINE('',#1237,#780);+#1250=PLANE('',#1251);+#1251=AXIS2_PLACEMENT_3D('',#1239,#13,#769);+#1252=ADVANCED_FACE('',(#1253),#757,.F.);+#1253=FACE_BOUND('',#1254,.F.);+#1254=EDGE_LOOP('',(#1255,#1261,#1262,#1268));+#1255=ORIENTED_EDGE('',*,*,#1256,.F.);+#1256=EDGE_CURVE('',#269,#1257,#1259,.T.);+#1257=VERTEX_POINT('',#1258);+#1258=CARTESIAN_POINT('',(-3.05,-0.64,0.65));+#1259=LINE('',#1260,#754);+#1260=CARTESIAN_POINT('',(-3.05,-0.64,0.477669411398));+#1261=ORIENTED_EDGE('',*,*,#268,.T.);+#1262=ORIENTED_EDGE('',*,*,#1263,.T.);+#1263=EDGE_CURVE('',#265,#1264,#1266,.T.);+#1264=VERTEX_POINT('',#1265);+#1265=CARTESIAN_POINT('',(-3.05,-0.36,0.65));+#1266=LINE('',#1267,#754);+#1267=CARTESIAN_POINT('',(-3.05,-0.36,0.477669411398));+#1268=ORIENTED_EDGE('',*,*,#1269,.F.);+#1269=EDGE_CURVE('',#1257,#1264,#722,.T.);+#1270=ADVANCED_FACE('',(#1271),#1289,.F.);+#1271=FACE_BOUND('',#1272,.F.);+#1272=EDGE_LOOP('',(#1273,#1279,#1280,#1286));+#1273=ORIENTED_EDGE('',*,*,#1274,.F.);+#1274=EDGE_CURVE('',#265,#1275,#1277,.T.);+#1275=VERTEX_POINT('',#1276);+#1276=CARTESIAN_POINT('',(-3.25,-0.36,0.5));+#1277=LINE('',#1278,#768);+#1278=CARTESIAN_POINT('',(-2.95,-0.36,0.5));+#1279=ORIENTED_EDGE('',*,*,#264,.T.);+#1280=ORIENTED_EDGE('',*,*,#1281,.T.);+#1281=EDGE_CURVE('',#261,#1282,#1284,.T.);+#1282=VERTEX_POINT('',#1283);+#1283=CARTESIAN_POINT('',(-3.25,-0.14,0.5));+#1284=LINE('',#1285,#768);+#1285=CARTESIAN_POINT('',(-2.95,-0.14,0.5));+#1286=ORIENTED_EDGE('',*,*,#1287,.F.);+#1287=EDGE_CURVE('',#1275,#1282,#1288,.T.);+#1288=LINE('',#1276,#780);+#1289=PLANE('',#1290);+#1290=AXIS2_PLACEMENT_3D('',#1278,#13,#769);+#1291=ADVANCED_FACE('',(#1292),#757,.F.);+#1292=FACE_BOUND('',#1293,.F.);+#1293=EDGE_LOOP('',(#1294,#1300,#1301,#1307));+#1294=ORIENTED_EDGE('',*,*,#1295,.F.);+#1295=EDGE_CURVE('',#261,#1296,#1298,.T.);+#1296=VERTEX_POINT('',#1297);+#1297=CARTESIAN_POINT('',(-3.05,-0.14,0.65));+#1298=LINE('',#1299,#754);+#1299=CARTESIAN_POINT('',(-3.05,-0.14,0.477669411398));+#1300=ORIENTED_EDGE('',*,*,#260,.T.);+#1301=ORIENTED_EDGE('',*,*,#1302,.T.);+#1302=EDGE_CURVE('',#257,#1303,#1305,.T.);+#1303=VERTEX_POINT('',#1304);+#1304=CARTESIAN_POINT('',(-3.05,0.14,0.65));+#1305=LINE('',#1306,#754);+#1306=CARTESIAN_POINT('',(-3.05,0.14,0.477669411398));+#1307=ORIENTED_EDGE('',*,*,#1308,.F.);+#1308=EDGE_CURVE('',#1296,#1303,#722,.T.);+#1309=ADVANCED_FACE('',(#1310),#1328,.F.);+#1310=FACE_BOUND('',#1311,.F.);+#1311=EDGE_LOOP('',(#1312,#1318,#1319,#1325));+#1312=ORIENTED_EDGE('',*,*,#1313,.F.);+#1313=EDGE_CURVE('',#257,#1314,#1316,.T.);+#1314=VERTEX_POINT('',#1315);+#1315=CARTESIAN_POINT('',(-3.25,0.14,0.5));+#1316=LINE('',#1317,#768);+#1317=CARTESIAN_POINT('',(-2.95,0.14,0.5));+#1318=ORIENTED_EDGE('',*,*,#256,.T.);+#1319=ORIENTED_EDGE('',*,*,#1320,.T.);+#1320=EDGE_CURVE('',#253,#1321,#1323,.T.);+#1321=VERTEX_POINT('',#1322);+#1322=CARTESIAN_POINT('',(-3.25,0.36,0.5));+#1323=LINE('',#1324,#768);+#1324=CARTESIAN_POINT('',(-2.95,0.36,0.5));+#1325=ORIENTED_EDGE('',*,*,#1326,.F.);+#1326=EDGE_CURVE('',#1314,#1321,#1327,.T.);+#1327=LINE('',#1315,#780);+#1328=PLANE('',#1329);+#1329=AXIS2_PLACEMENT_3D('',#1317,#13,#769);+#1330=ADVANCED_FACE('',(#1331),#757,.F.);+#1331=FACE_BOUND('',#1332,.F.);+#1332=EDGE_LOOP('',(#1333,#1339,#1340,#1346));+#1333=ORIENTED_EDGE('',*,*,#1334,.F.);+#1334=EDGE_CURVE('',#253,#1335,#1337,.T.);+#1335=VERTEX_POINT('',#1336);+#1336=CARTESIAN_POINT('',(-3.05,0.36,0.65));+#1337=LINE('',#1338,#754);+#1338=CARTESIAN_POINT('',(-3.05,0.36,0.477669411398));+#1339=ORIENTED_EDGE('',*,*,#252,.T.);+#1340=ORIENTED_EDGE('',*,*,#1341,.T.);+#1341=EDGE_CURVE('',#249,#1342,#1344,.T.);+#1342=VERTEX_POINT('',#1343);+#1343=CARTESIAN_POINT('',(-3.05,0.64,0.65));+#1344=LINE('',#1345,#754);+#1345=CARTESIAN_POINT('',(-3.05,0.64,0.477669411398));+#1346=ORIENTED_EDGE('',*,*,#1347,.F.);+#1347=EDGE_CURVE('',#1335,#1342,#722,.T.);+#1348=ADVANCED_FACE('',(#1349),#1367,.F.);+#1349=FACE_BOUND('',#1350,.F.);+#1350=EDGE_LOOP('',(#1351,#1357,#1358,#1364));+#1351=ORIENTED_EDGE('',*,*,#1352,.F.);+#1352=EDGE_CURVE('',#249,#1353,#1355,.T.);+#1353=VERTEX_POINT('',#1354);+#1354=CARTESIAN_POINT('',(-3.25,0.64,0.5));+#1355=LINE('',#1356,#768);+#1356=CARTESIAN_POINT('',(-2.95,0.64,0.5));+#1357=ORIENTED_EDGE('',*,*,#248,.T.);+#1358=ORIENTED_EDGE('',*,*,#1359,.T.);+#1359=EDGE_CURVE('',#245,#1360,#1362,.T.);+#1360=VERTEX_POINT('',#1361);+#1361=CARTESIAN_POINT('',(-3.25,0.86,0.5));+#1362=LINE('',#1363,#768);+#1363=CARTESIAN_POINT('',(-2.95,0.86,0.5));+#1364=ORIENTED_EDGE('',*,*,#1365,.F.);+#1365=EDGE_CURVE('',#1353,#1360,#1366,.T.);+#1366=LINE('',#1354,#780);+#1367=PLANE('',#1368);+#1368=AXIS2_PLACEMENT_3D('',#1356,#13,#769);+#1369=ADVANCED_FACE('',(#1370),#757,.F.);+#1370=FACE_BOUND('',#1371,.F.);+#1371=EDGE_LOOP('',(#1372,#1378,#1379,#1385));+#1372=ORIENTED_EDGE('',*,*,#1373,.F.);+#1373=EDGE_CURVE('',#245,#1374,#1376,.T.);+#1374=VERTEX_POINT('',#1375);+#1375=CARTESIAN_POINT('',(-3.05,0.86,0.65));+#1376=LINE('',#1377,#754);+#1377=CARTESIAN_POINT('',(-3.05,0.86,0.477669411398));+#1378=ORIENTED_EDGE('',*,*,#244,.T.);+#1379=ORIENTED_EDGE('',*,*,#1380,.T.);+#1380=EDGE_CURVE('',#241,#1381,#1383,.T.);+#1381=VERTEX_POINT('',#1382);+#1382=CARTESIAN_POINT('',(-3.05,1.14,0.65));+#1383=LINE('',#1384,#754);+#1384=CARTESIAN_POINT('',(-3.05,1.14,0.477669411398));+#1385=ORIENTED_EDGE('',*,*,#1386,.F.);+#1386=EDGE_CURVE('',#1374,#1381,#722,.T.);+#1387=ADVANCED_FACE('',(#1388),#1406,.F.);+#1388=FACE_BOUND('',#1389,.F.);+#1389=EDGE_LOOP('',(#1390,#1396,#1397,#1403));+#1390=ORIENTED_EDGE('',*,*,#1391,.F.);+#1391=EDGE_CURVE('',#241,#1392,#1394,.T.);+#1392=VERTEX_POINT('',#1393);+#1393=CARTESIAN_POINT('',(-3.25,1.14,0.5));+#1394=LINE('',#1395,#768);+#1395=CARTESIAN_POINT('',(-2.95,1.14,0.5));+#1396=ORIENTED_EDGE('',*,*,#240,.T.);+#1397=ORIENTED_EDGE('',*,*,#1398,.T.);+#1398=EDGE_CURVE('',#237,#1399,#1401,.T.);+#1399=VERTEX_POINT('',#1400);+#1400=CARTESIAN_POINT('',(-3.25,1.36,0.5));+#1401=LINE('',#1402,#768);+#1402=CARTESIAN_POINT('',(-2.95,1.36,0.5));+#1403=ORIENTED_EDGE('',*,*,#1404,.F.);+#1404=EDGE_CURVE('',#1392,#1399,#1405,.T.);+#1405=LINE('',#1393,#780);+#1406=PLANE('',#1407);+#1407=AXIS2_PLACEMENT_3D('',#1395,#13,#769);+#1408=ADVANCED_FACE('',(#1409),#757,.F.);+#1409=FACE_BOUND('',#1410,.F.);+#1410=EDGE_LOOP('',(#1411,#1417,#1418,#1424));+#1411=ORIENTED_EDGE('',*,*,#1412,.F.);+#1412=EDGE_CURVE('',#237,#1413,#1415,.T.);+#1413=VERTEX_POINT('',#1414);+#1414=CARTESIAN_POINT('',(-3.05,1.36,0.65));+#1415=LINE('',#1416,#754);+#1416=CARTESIAN_POINT('',(-3.05,1.36,0.477669411398));+#1417=ORIENTED_EDGE('',*,*,#236,.T.);+#1418=ORIENTED_EDGE('',*,*,#1419,.T.);+#1419=EDGE_CURVE('',#233,#1420,#1422,.T.);+#1420=VERTEX_POINT('',#1421);+#1421=CARTESIAN_POINT('',(-3.05,1.64,0.65));+#1422=LINE('',#1423,#754);+#1423=CARTESIAN_POINT('',(-3.05,1.64,0.477669411398));+#1424=ORIENTED_EDGE('',*,*,#1425,.F.);+#1425=EDGE_CURVE('',#1413,#1420,#722,.T.);+#1426=ADVANCED_FACE('',(#1427),#1445,.F.);+#1427=FACE_BOUND('',#1428,.F.);+#1428=EDGE_LOOP('',(#1429,#1435,#1436,#1442));+#1429=ORIENTED_EDGE('',*,*,#1430,.F.);+#1430=EDGE_CURVE('',#233,#1431,#1433,.T.);+#1431=VERTEX_POINT('',#1432);+#1432=CARTESIAN_POINT('',(-3.25,1.64,0.5));+#1433=LINE('',#1434,#768);+#1434=CARTESIAN_POINT('',(-2.95,1.64,0.5));+#1435=ORIENTED_EDGE('',*,*,#232,.T.);+#1436=ORIENTED_EDGE('',*,*,#1437,.T.);+#1437=EDGE_CURVE('',#229,#1438,#1440,.T.);+#1438=VERTEX_POINT('',#1439);+#1439=CARTESIAN_POINT('',(-3.25,1.86,0.5));+#1440=LINE('',#1441,#768);+#1441=CARTESIAN_POINT('',(-2.95,1.86,0.5));+#1442=ORIENTED_EDGE('',*,*,#1443,.F.);+#1443=EDGE_CURVE('',#1431,#1438,#1444,.T.);+#1444=LINE('',#1432,#780);+#1445=PLANE('',#1446);+#1446=AXIS2_PLACEMENT_3D('',#1434,#13,#769);+#1447=ADVANCED_FACE('',(#1448),#757,.F.);+#1448=FACE_BOUND('',#1449,.F.);+#1449=EDGE_LOOP('',(#1450,#1456,#1457,#1463));+#1450=ORIENTED_EDGE('',*,*,#1451,.F.);+#1451=EDGE_CURVE('',#229,#1452,#1454,.T.);+#1452=VERTEX_POINT('',#1453);+#1453=CARTESIAN_POINT('',(-3.05,1.86,0.65));+#1454=LINE('',#1455,#754);+#1455=CARTESIAN_POINT('',(-3.05,1.86,0.477669411398));+#1456=ORIENTED_EDGE('',*,*,#228,.T.);+#1457=ORIENTED_EDGE('',*,*,#1458,.T.);+#1458=EDGE_CURVE('',#225,#1459,#1461,.T.);+#1459=VERTEX_POINT('',#1460);+#1460=CARTESIAN_POINT('',(-3.05,2.14,0.65));+#1461=LINE('',#1462,#754);+#1462=CARTESIAN_POINT('',(-3.05,2.14,0.477669411398));+#1463=ORIENTED_EDGE('',*,*,#1464,.F.);+#1464=EDGE_CURVE('',#1452,#1459,#722,.T.);+#1465=ADVANCED_FACE('',(#1466),#1484,.F.);+#1466=FACE_BOUND('',#1467,.F.);+#1467=EDGE_LOOP('',(#1468,#1474,#1475,#1481));+#1468=ORIENTED_EDGE('',*,*,#1469,.F.);+#1469=EDGE_CURVE('',#225,#1470,#1472,.T.);+#1470=VERTEX_POINT('',#1471);+#1471=CARTESIAN_POINT('',(-3.25,2.14,0.5));+#1472=LINE('',#1473,#768);+#1473=CARTESIAN_POINT('',(-2.95,2.14,0.5));+#1474=ORIENTED_EDGE('',*,*,#224,.T.);+#1475=ORIENTED_EDGE('',*,*,#1476,.T.);+#1476=EDGE_CURVE('',#221,#1477,#1479,.T.);+#1477=VERTEX_POINT('',#1478);+#1478=CARTESIAN_POINT('',(-3.25,2.36,0.5));+#1479=LINE('',#1480,#768);+#1480=CARTESIAN_POINT('',(-2.95,2.36,0.5));+#1481=ORIENTED_EDGE('',*,*,#1482,.F.);+#1482=EDGE_CURVE('',#1470,#1477,#1483,.T.);+#1483=LINE('',#1471,#780);+#1484=PLANE('',#1485);+#1485=AXIS2_PLACEMENT_3D('',#1473,#13,#769);+#1486=ADVANCED_FACE('',(#1487),#757,.F.);+#1487=FACE_BOUND('',#1488,.F.);+#1488=EDGE_LOOP('',(#1489,#1495,#1496,#1502));+#1489=ORIENTED_EDGE('',*,*,#1490,.F.);+#1490=EDGE_CURVE('',#221,#1491,#1493,.T.);+#1491=VERTEX_POINT('',#1492);+#1492=CARTESIAN_POINT('',(-3.05,2.36,0.65));+#1493=LINE('',#1494,#754);+#1494=CARTESIAN_POINT('',(-3.05,2.36,0.477669411398));+#1495=ORIENTED_EDGE('',*,*,#220,.T.);+#1496=ORIENTED_EDGE('',*,*,#1497,.T.);+#1497=EDGE_CURVE('',#217,#1498,#1500,.T.);+#1498=VERTEX_POINT('',#1499);+#1499=CARTESIAN_POINT('',(-3.05,2.64,0.65));+#1500=LINE('',#1501,#754);+#1501=CARTESIAN_POINT('',(-3.05,2.64,0.477669411398));+#1502=ORIENTED_EDGE('',*,*,#1503,.F.);+#1503=EDGE_CURVE('',#1491,#1498,#722,.T.);+#1504=ADVANCED_FACE('',(#1505),#1523,.F.);+#1505=FACE_BOUND('',#1506,.F.);+#1506=EDGE_LOOP('',(#1507,#1513,#1514,#1520));+#1507=ORIENTED_EDGE('',*,*,#1508,.F.);+#1508=EDGE_CURVE('',#217,#1509,#1511,.T.);+#1509=VERTEX_POINT('',#1510);+#1510=CARTESIAN_POINT('',(-3.25,2.64,0.5));+#1511=LINE('',#1512,#768);+#1512=CARTESIAN_POINT('',(-2.95,2.64,0.5));+#1513=ORIENTED_EDGE('',*,*,#216,.T.);+#1514=ORIENTED_EDGE('',*,*,#1515,.T.);+#1515=EDGE_CURVE('',#213,#1516,#1518,.T.);+#1516=VERTEX_POINT('',#1517);+#1517=CARTESIAN_POINT('',(-3.25,2.86,0.5));+#1518=LINE('',#1519,#768);+#1519=CARTESIAN_POINT('',(-2.95,2.86,0.5));+#1520=ORIENTED_EDGE('',*,*,#1521,.F.);+#1521=EDGE_CURVE('',#1509,#1516,#1522,.T.);+#1522=LINE('',#1510,#780);+#1523=PLANE('',#1524);+#1524=AXIS2_PLACEMENT_3D('',#1512,#13,#769);+#1525=ADVANCED_FACE('',(#1526),#757,.F.);+#1526=FACE_BOUND('',#1527,.F.);+#1527=EDGE_LOOP('',(#1528,#1534,#1535,#1541));+#1528=ORIENTED_EDGE('',*,*,#1529,.F.);+#1529=EDGE_CURVE('',#213,#1530,#1532,.T.);+#1530=VERTEX_POINT('',#1531);+#1531=CARTESIAN_POINT('',(-3.05,2.86,0.65));+#1532=LINE('',#1533,#754);+#1533=CARTESIAN_POINT('',(-3.05,2.86,0.477669411398));+#1534=ORIENTED_EDGE('',*,*,#212,.T.);+#1535=ORIENTED_EDGE('',*,*,#1536,.T.);+#1536=EDGE_CURVE('',#209,#1537,#1539,.T.);+#1537=VERTEX_POINT('',#1538);+#1538=CARTESIAN_POINT('',(-3.05,3.14,0.65));+#1539=LINE('',#1540,#754);+#1540=CARTESIAN_POINT('',(-3.05,3.14,0.477669411398));+#1541=ORIENTED_EDGE('',*,*,#1542,.F.);+#1542=EDGE_CURVE('',#1530,#1537,#722,.T.);+#1543=ADVANCED_FACE('',(#1544),#1562,.F.);+#1544=FACE_BOUND('',#1545,.F.);+#1545=EDGE_LOOP('',(#1546,#1552,#1553,#1559));+#1546=ORIENTED_EDGE('',*,*,#1547,.F.);+#1547=EDGE_CURVE('',#209,#1548,#1550,.T.);+#1548=VERTEX_POINT('',#1549);+#1549=CARTESIAN_POINT('',(-3.25,3.14,0.5));+#1550=LINE('',#1551,#768);+#1551=CARTESIAN_POINT('',(-2.95,3.14,0.5));+#1552=ORIENTED_EDGE('',*,*,#208,.T.);+#1553=ORIENTED_EDGE('',*,*,#1554,.T.);+#1554=EDGE_CURVE('',#205,#1555,#1557,.T.);+#1555=VERTEX_POINT('',#1556);+#1556=CARTESIAN_POINT('',(-3.25,3.36,0.5));+#1557=LINE('',#1558,#768);+#1558=CARTESIAN_POINT('',(-2.95,3.36,0.5));+#1559=ORIENTED_EDGE('',*,*,#1560,.F.);+#1560=EDGE_CURVE('',#1548,#1555,#1561,.T.);+#1561=LINE('',#1549,#780);+#1562=PLANE('',#1563);+#1563=AXIS2_PLACEMENT_3D('',#1551,#13,#769);+#1564=ADVANCED_FACE('',(#1565),#757,.F.);+#1565=FACE_BOUND('',#1566,.F.);+#1566=EDGE_LOOP('',(#1567,#1573,#1574,#1580));+#1567=ORIENTED_EDGE('',*,*,#1568,.F.);+#1568=EDGE_CURVE('',#205,#1569,#1571,.T.);+#1569=VERTEX_POINT('',#1570);+#1570=CARTESIAN_POINT('',(-3.05,3.36,0.65));+#1571=LINE('',#1572,#754);+#1572=CARTESIAN_POINT('',(-3.05,3.36,0.477669411398));+#1573=ORIENTED_EDGE('',*,*,#204,.T.);+#1574=ORIENTED_EDGE('',*,*,#1575,.T.);+#1575=EDGE_CURVE('',#201,#1576,#1578,.T.);+#1576=VERTEX_POINT('',#1577);+#1577=CARTESIAN_POINT('',(-3.05,3.64,0.65));+#1578=LINE('',#1579,#754);+#1579=CARTESIAN_POINT('',(-3.05,3.64,0.477669411398));+#1580=ORIENTED_EDGE('',*,*,#1581,.F.);+#1581=EDGE_CURVE('',#1569,#1576,#722,.T.);+#1582=ADVANCED_FACE('',(#1583),#1601,.F.);+#1583=FACE_BOUND('',#1584,.F.);+#1584=EDGE_LOOP('',(#1585,#1591,#1592,#1598));+#1585=ORIENTED_EDGE('',*,*,#1586,.F.);+#1586=EDGE_CURVE('',#201,#1587,#1589,.T.);+#1587=VERTEX_POINT('',#1588);+#1588=CARTESIAN_POINT('',(-3.25,3.64,0.5));+#1589=LINE('',#1590,#768);+#1590=CARTESIAN_POINT('',(-2.95,3.64,0.5));+#1591=ORIENTED_EDGE('',*,*,#200,.T.);+#1592=ORIENTED_EDGE('',*,*,#1593,.T.);+#1593=EDGE_CURVE('',#197,#1594,#1596,.T.);+#1594=VERTEX_POINT('',#1595);+#1595=CARTESIAN_POINT('',(-3.25,3.86,0.5));+#1596=LINE('',#1597,#768);+#1597=CARTESIAN_POINT('',(-2.95,3.86,0.5));+#1598=ORIENTED_EDGE('',*,*,#1599,.F.);+#1599=EDGE_CURVE('',#1587,#1594,#1600,.T.);+#1600=LINE('',#1588,#780);+#1601=PLANE('',#1602);+#1602=AXIS2_PLACEMENT_3D('',#1590,#13,#769);+#1603=ADVANCED_FACE('',(#1604),#757,.F.);+#1604=FACE_BOUND('',#1605,.F.);+#1605=EDGE_LOOP('',(#1606,#1612,#1613,#1619));+#1606=ORIENTED_EDGE('',*,*,#1607,.F.);+#1607=EDGE_CURVE('',#197,#1608,#1610,.T.);+#1608=VERTEX_POINT('',#1609);+#1609=CARTESIAN_POINT('',(-3.05,3.86,0.65));+#1610=LINE('',#1611,#754);+#1611=CARTESIAN_POINT('',(-3.05,3.86,0.477669411398));+#1612=ORIENTED_EDGE('',*,*,#196,.T.);+#1613=ORIENTED_EDGE('',*,*,#1614,.T.);+#1614=EDGE_CURVE('',#193,#1615,#1617,.T.);+#1615=VERTEX_POINT('',#1616);+#1616=CARTESIAN_POINT('',(-3.05,4.14,0.65));+#1617=LINE('',#1618,#754);+#1618=CARTESIAN_POINT('',(-3.05,4.14,0.477669411398));+#1619=ORIENTED_EDGE('',*,*,#1620,.F.);+#1620=EDGE_CURVE('',#1608,#1615,#722,.T.);+#1621=ADVANCED_FACE('',(#1622),#1640,.F.);+#1622=FACE_BOUND('',#1623,.F.);+#1623=EDGE_LOOP('',(#1624,#1630,#1631,#1637));+#1624=ORIENTED_EDGE('',*,*,#1625,.F.);+#1625=EDGE_CURVE('',#193,#1626,#1628,.T.);+#1626=VERTEX_POINT('',#1627);+#1627=CARTESIAN_POINT('',(-3.25,4.14,0.5));+#1628=LINE('',#1629,#768);+#1629=CARTESIAN_POINT('',(-2.95,4.14,0.5));+#1630=ORIENTED_EDGE('',*,*,#192,.T.);+#1631=ORIENTED_EDGE('',*,*,#1632,.T.);+#1632=EDGE_CURVE('',#189,#1633,#1635,.T.);+#1633=VERTEX_POINT('',#1634);+#1634=CARTESIAN_POINT('',(-3.25,4.36,0.5));+#1635=LINE('',#1636,#768);+#1636=CARTESIAN_POINT('',(-2.95,4.36,0.5));+#1637=ORIENTED_EDGE('',*,*,#1638,.F.);+#1638=EDGE_CURVE('',#1626,#1633,#1639,.T.);+#1639=LINE('',#1627,#780);+#1640=PLANE('',#1641);+#1641=AXIS2_PLACEMENT_3D('',#1629,#13,#769);+#1642=ADVANCED_FACE('',(#1643),#757,.F.);+#1643=FACE_BOUND('',#1644,.F.);+#1644=EDGE_LOOP('',(#1645,#1651,#1652,#1658));+#1645=ORIENTED_EDGE('',*,*,#1646,.F.);+#1646=EDGE_CURVE('',#189,#1647,#1649,.T.);+#1647=VERTEX_POINT('',#1648);+#1648=CARTESIAN_POINT('',(-3.05,4.36,0.65));+#1649=LINE('',#1650,#754);+#1650=CARTESIAN_POINT('',(-3.05,4.36,0.477669411398));+#1651=ORIENTED_EDGE('',*,*,#188,.T.);+#1652=ORIENTED_EDGE('',*,*,#1653,.T.);+#1653=EDGE_CURVE('',#185,#1654,#1656,.T.);+#1654=VERTEX_POINT('',#1655);+#1655=CARTESIAN_POINT('',(-3.05,4.64,0.65));+#1656=LINE('',#1657,#754);+#1657=CARTESIAN_POINT('',(-3.05,4.64,0.477669411398));+#1658=ORIENTED_EDGE('',*,*,#1659,.F.);+#1659=EDGE_CURVE('',#1647,#1654,#722,.T.);+#1660=ADVANCED_FACE('',(#1661),#1679,.F.);+#1661=FACE_BOUND('',#1662,.F.);+#1662=EDGE_LOOP('',(#1663,#1669,#1670,#1676));+#1663=ORIENTED_EDGE('',*,*,#1664,.F.);+#1664=EDGE_CURVE('',#185,#1665,#1667,.T.);+#1665=VERTEX_POINT('',#1666);+#1666=CARTESIAN_POINT('',(-3.25,4.64,0.5));+#1667=LINE('',#1668,#768);+#1668=CARTESIAN_POINT('',(-2.95,4.64,0.5));+#1669=ORIENTED_EDGE('',*,*,#184,.T.);+#1670=ORIENTED_EDGE('',*,*,#1671,.T.);+#1671=EDGE_CURVE('',#181,#1672,#1674,.T.);+#1672=VERTEX_POINT('',#1673);+#1673=CARTESIAN_POINT('',(-3.25,4.86,0.5));+#1674=LINE('',#1675,#768);+#1675=CARTESIAN_POINT('',(-2.95,4.86,0.5));+#1676=ORIENTED_EDGE('',*,*,#1677,.F.);+#1677=EDGE_CURVE('',#1665,#1672,#1678,.T.);+#1678=LINE('',#1666,#780);+#1679=PLANE('',#1680);+#1680=AXIS2_PLACEMENT_3D('',#1668,#13,#769);+#1681=ADVANCED_FACE('',(#1682),#757,.F.);+#1682=FACE_BOUND('',#1683,.F.);+#1683=EDGE_LOOP('',(#1684,#1690,#1691,#1697));+#1684=ORIENTED_EDGE('',*,*,#1685,.F.);+#1685=EDGE_CURVE('',#181,#1686,#1688,.T.);+#1686=VERTEX_POINT('',#1687);+#1687=CARTESIAN_POINT('',(-3.05,4.86,0.65));+#1688=LINE('',#1689,#754);+#1689=CARTESIAN_POINT('',(-3.05,4.86,0.477669411398));+#1690=ORIENTED_EDGE('',*,*,#180,.T.);+#1691=ORIENTED_EDGE('',*,*,#1692,.T.);+#1692=EDGE_CURVE('',#177,#1693,#1695,.T.);+#1693=VERTEX_POINT('',#1694);+#1694=CARTESIAN_POINT('',(-3.05,5.14,0.65));+#1695=LINE('',#1696,#754);+#1696=CARTESIAN_POINT('',(-3.05,5.14,0.477669411398));+#1697=ORIENTED_EDGE('',*,*,#1698,.F.);+#1698=EDGE_CURVE('',#1686,#1693,#722,.T.);+#1699=ADVANCED_FACE('',(#1700),#1718,.F.);+#1700=FACE_BOUND('',#1701,.F.);+#1701=EDGE_LOOP('',(#1702,#1708,#1709,#1715));+#1702=ORIENTED_EDGE('',*,*,#1703,.F.);+#1703=EDGE_CURVE('',#177,#1704,#1706,.T.);+#1704=VERTEX_POINT('',#1705);+#1705=CARTESIAN_POINT('',(-3.25,5.14,0.5));+#1706=LINE('',#1707,#768);+#1707=CARTESIAN_POINT('',(-2.95,5.14,0.5));+#1708=ORIENTED_EDGE('',*,*,#176,.T.);+#1709=ORIENTED_EDGE('',*,*,#1710,.T.);+#1710=EDGE_CURVE('',#173,#1711,#1713,.T.);+#1711=VERTEX_POINT('',#1712);+#1712=CARTESIAN_POINT('',(-3.25,5.36,0.5));+#1713=LINE('',#1714,#768);+#1714=CARTESIAN_POINT('',(-2.95,5.36,0.5));+#1715=ORIENTED_EDGE('',*,*,#1716,.F.);+#1716=EDGE_CURVE('',#1704,#1711,#1717,.T.);+#1717=LINE('',#1705,#780);+#1718=PLANE('',#1719);+#1719=AXIS2_PLACEMENT_3D('',#1707,#13,#769);+#1720=ADVANCED_FACE('',(#1721),#757,.F.);+#1721=FACE_BOUND('',#1722,.F.);+#1722=EDGE_LOOP('',(#1723,#1729,#1730,#1736));+#1723=ORIENTED_EDGE('',*,*,#1724,.F.);+#1724=EDGE_CURVE('',#173,#1725,#1727,.T.);+#1725=VERTEX_POINT('',#1726);+#1726=CARTESIAN_POINT('',(-3.05,5.36,0.65));+#1727=LINE('',#1728,#754);+#1728=CARTESIAN_POINT('',(-3.05,5.36,0.477669411398));+#1729=ORIENTED_EDGE('',*,*,#172,.T.);+#1730=ORIENTED_EDGE('',*,*,#1731,.T.);+#1731=EDGE_CURVE('',#169,#1732,#1734,.T.);+#1732=VERTEX_POINT('',#1733);+#1733=CARTESIAN_POINT('',(-3.05,5.64,0.65));+#1734=LINE('',#1735,#754);+#1735=CARTESIAN_POINT('',(-3.05,5.64,0.477669411398));+#1736=ORIENTED_EDGE('',*,*,#1737,.F.);+#1737=EDGE_CURVE('',#1725,#1732,#722,.T.);+#1738=ADVANCED_FACE('',(#1739),#1757,.F.);+#1739=FACE_BOUND('',#1740,.F.);+#1740=EDGE_LOOP('',(#1741,#1747,#1748,#1754));+#1741=ORIENTED_EDGE('',*,*,#1742,.F.);+#1742=EDGE_CURVE('',#169,#1743,#1745,.T.);+#1743=VERTEX_POINT('',#1744);+#1744=CARTESIAN_POINT('',(-3.25,5.64,0.5));+#1745=LINE('',#1746,#768);+#1746=CARTESIAN_POINT('',(-2.95,5.64,0.5));+#1747=ORIENTED_EDGE('',*,*,#168,.T.);+#1748=ORIENTED_EDGE('',*,*,#1749,.T.);+#1749=EDGE_CURVE('',#165,#1750,#1752,.T.);+#1750=VERTEX_POINT('',#1751);+#1751=CARTESIAN_POINT('',(-3.25,5.86,0.5));+#1752=LINE('',#1753,#768);+#1753=CARTESIAN_POINT('',(-2.95,5.86,0.5));+#1754=ORIENTED_EDGE('',*,*,#1755,.F.);+#1755=EDGE_CURVE('',#1743,#1750,#1756,.T.);+#1756=LINE('',#1744,#780);+#1757=PLANE('',#1758);+#1758=AXIS2_PLACEMENT_3D('',#1746,#13,#769);+#1759=ADVANCED_FACE('',(#1760),#757,.F.);+#1760=FACE_BOUND('',#1761,.F.);+#1761=EDGE_LOOP('',(#1762,#1768,#1769,#1775));+#1762=ORIENTED_EDGE('',*,*,#1763,.F.);+#1763=EDGE_CURVE('',#165,#1764,#1766,.T.);+#1764=VERTEX_POINT('',#1765);+#1765=CARTESIAN_POINT('',(-3.05,5.86,0.65));+#1766=LINE('',#1767,#754);+#1767=CARTESIAN_POINT('',(-3.05,5.86,0.477669411398));+#1768=ORIENTED_EDGE('',*,*,#164,.T.);+#1769=ORIENTED_EDGE('',*,*,#1770,.T.);+#1770=EDGE_CURVE('',#161,#1771,#1773,.T.);+#1771=VERTEX_POINT('',#1772);+#1772=CARTESIAN_POINT('',(-3.05,6.14,0.65));+#1773=LINE('',#1774,#754);+#1774=CARTESIAN_POINT('',(-3.05,6.14,0.477669411398));+#1775=ORIENTED_EDGE('',*,*,#1776,.F.);+#1776=EDGE_CURVE('',#1764,#1771,#722,.T.);+#1777=ADVANCED_FACE('',(#1778),#1796,.F.);+#1778=FACE_BOUND('',#1779,.F.);+#1779=EDGE_LOOP('',(#1780,#1786,#1787,#1793));+#1780=ORIENTED_EDGE('',*,*,#1781,.F.);+#1781=EDGE_CURVE('',#161,#1782,#1784,.T.);+#1782=VERTEX_POINT('',#1783);+#1783=CARTESIAN_POINT('',(-3.25,6.14,0.5));+#1784=LINE('',#1785,#768);+#1785=CARTESIAN_POINT('',(-2.95,6.14,0.5));+#1786=ORIENTED_EDGE('',*,*,#160,.T.);+#1787=ORIENTED_EDGE('',*,*,#1788,.T.);+#1788=EDGE_CURVE('',#157,#1789,#1791,.T.);+#1789=VERTEX_POINT('',#1790);+#1790=CARTESIAN_POINT('',(-3.25,6.36,0.5));+#1791=LINE('',#1792,#768);+#1792=CARTESIAN_POINT('',(-2.95,6.36,0.5));+#1793=ORIENTED_EDGE('',*,*,#1794,.F.);+#1794=EDGE_CURVE('',#1782,#1789,#1795,.T.);+#1795=LINE('',#1783,#780);+#1796=PLANE('',#1797);+#1797=AXIS2_PLACEMENT_3D('',#1785,#13,#769);+#1798=ADVANCED_FACE('',(#1799),#757,.F.);+#1799=FACE_BOUND('',#1800,.F.);+#1800=EDGE_LOOP('',(#1801,#1807,#1808,#1814));+#1801=ORIENTED_EDGE('',*,*,#1802,.F.);+#1802=EDGE_CURVE('',#157,#1803,#1805,.T.);+#1803=VERTEX_POINT('',#1804);+#1804=CARTESIAN_POINT('',(-3.05,6.36,0.65));+#1805=LINE('',#1806,#754);+#1806=CARTESIAN_POINT('',(-3.05,6.36,0.477669411398));+#1807=ORIENTED_EDGE('',*,*,#156,.T.);+#1808=ORIENTED_EDGE('',*,*,#1809,.T.);+#1809=EDGE_CURVE('',#153,#1810,#1812,.T.);+#1810=VERTEX_POINT('',#1811);+#1811=CARTESIAN_POINT('',(-3.05,6.64,0.65));+#1812=LINE('',#1813,#754);+#1813=CARTESIAN_POINT('',(-3.05,6.64,0.477669411398));+#1814=ORIENTED_EDGE('',*,*,#1815,.F.);+#1815=EDGE_CURVE('',#1803,#1810,#722,.T.);+#1816=ADVANCED_FACE('',(#1817),#1835,.F.);+#1817=FACE_BOUND('',#1818,.F.);+#1818=EDGE_LOOP('',(#1819,#1825,#1826,#1832));+#1819=ORIENTED_EDGE('',*,*,#1820,.F.);+#1820=EDGE_CURVE('',#153,#1821,#1823,.T.);+#1821=VERTEX_POINT('',#1822);+#1822=CARTESIAN_POINT('',(-3.25,6.64,0.5));+#1823=LINE('',#1824,#768);+#1824=CARTESIAN_POINT('',(-2.95,6.64,0.5));+#1825=ORIENTED_EDGE('',*,*,#152,.T.);+#1826=ORIENTED_EDGE('',*,*,#1827,.T.);+#1827=EDGE_CURVE('',#147,#1828,#1830,.T.);+#1828=VERTEX_POINT('',#1829);+#1829=CARTESIAN_POINT('',(-3.25,6.86,0.5));+#1830=LINE('',#1831,#768);+#1831=CARTESIAN_POINT('',(-2.95,6.86,0.5));+#1832=ORIENTED_EDGE('',*,*,#1833,.F.);+#1833=EDGE_CURVE('',#1821,#1828,#1834,.T.);+#1834=LINE('',#1822,#780);+#1835=PLANE('',#1836);+#1836=AXIS2_PLACEMENT_3D('',#1824,#13,#769);+#1837=ADVANCED_FACE('',(#1838),#757,.F.);+#1838=FACE_BOUND('',#1839,.F.);+#1839=EDGE_LOOP('',(#1840,#1844,#1845,#1846));+#1840=ORIENTED_EDGE('',*,*,#1841,.F.);+#1841=EDGE_CURVE('',#147,#714,#1842,.T.);+#1842=LINE('',#1843,#754);+#1843=CARTESIAN_POINT('',(-3.05,6.86,0.477669411398));+#1844=ORIENTED_EDGE('',*,*,#146,.T.);+#1845=ORIENTED_EDGE('',*,*,#736,.T.);+#1846=ORIENTED_EDGE('',*,*,#721,.F.);+#1847=ADVANCED_FACE('',(#1848),#1857,.F.);+#1848=FACE_BOUND('',#1849,.F.);+#1849=EDGE_LOOP('',(#1850,#1851,#1852,#1856));+#1850=ORIENTED_EDGE('',*,*,#655,.F.);+#1851=ORIENTED_EDGE('',*,*,#612,.T.);+#1852=ORIENTED_EDGE('',*,*,#1853,.T.);+#1853=EDGE_CURVE('',#609,#677,#1854,.T.);+#1854=LINE('',#1855,#754);+#1855=CARTESIAN_POINT('',(3.05,6.86,0.477669411398));+#1856=ORIENTED_EDGE('',*,*,#676,.F.);+#1857=PLANE('',#1858);+#1858=AXIS2_PLACEMENT_3D('',#657,#73,#59);+#1859=ADVANCED_FACE('',(#1860),#1878,.F.);+#1860=FACE_BOUND('',#1861,.F.);+#1861=EDGE_LOOP('',(#1862,#1868,#1869,#1875));+#1862=ORIENTED_EDGE('',*,*,#1863,.F.);+#1863=EDGE_CURVE('',#609,#1864,#1866,.T.);+#1864=VERTEX_POINT('',#1865);+#1865=CARTESIAN_POINT('',(3.25,6.86,0.5));+#1866=LINE('',#1867,#27);+#1867=CARTESIAN_POINT('',(2.95,6.86,0.5));+#1868=ORIENTED_EDGE('',*,*,#608,.T.);+#1869=ORIENTED_EDGE('',*,*,#1870,.T.);+#1870=EDGE_CURVE('',#605,#1871,#1873,.T.);+#1871=VERTEX_POINT('',#1872);+#1872=CARTESIAN_POINT('',(3.25,6.64,0.5));+#1873=LINE('',#1874,#27);+#1874=CARTESIAN_POINT('',(2.95,6.64,0.5));+#1875=ORIENTED_EDGE('',*,*,#1876,.F.);+#1876=EDGE_CURVE('',#1864,#1871,#1877,.T.);+#1877=LINE('',#1865,#58);+#1878=PLANE('',#1879);+#1879=AXIS2_PLACEMENT_3D('',#1867,#13,#28);+#1880=ADVANCED_FACE('',(#1881),#1857,.F.);+#1881=FACE_BOUND('',#1882,.F.);+#1882=EDGE_LOOP('',(#1883,#1889,#1890,#1896));+#1883=ORIENTED_EDGE('',*,*,#1884,.F.);+#1884=EDGE_CURVE('',#605,#1885,#1887,.T.);+#1885=VERTEX_POINT('',#1886);+#1886=CARTESIAN_POINT('',(3.05,6.64,0.65));+#1887=LINE('',#1888,#754);+#1888=CARTESIAN_POINT('',(3.05,6.64,0.477669411398));+#1889=ORIENTED_EDGE('',*,*,#604,.T.);+#1890=ORIENTED_EDGE('',*,*,#1891,.T.);+#1891=EDGE_CURVE('',#601,#1892,#1894,.T.);+#1892=VERTEX_POINT('',#1893);+#1893=CARTESIAN_POINT('',(3.05,6.36,0.65));+#1894=LINE('',#1895,#754);+#1895=CARTESIAN_POINT('',(3.05,6.36,0.477669411398));+#1896=ORIENTED_EDGE('',*,*,#1897,.F.);+#1897=EDGE_CURVE('',#1885,#1892,#679,.T.);+#1898=ADVANCED_FACE('',(#1899),#1917,.F.);+#1899=FACE_BOUND('',#1900,.F.);+#1900=EDGE_LOOP('',(#1901,#1907,#1908,#1914));+#1901=ORIENTED_EDGE('',*,*,#1902,.F.);+#1902=EDGE_CURVE('',#601,#1903,#1905,.T.);+#1903=VERTEX_POINT('',#1904);+#1904=CARTESIAN_POINT('',(3.25,6.36,0.5));+#1905=LINE('',#1906,#27);+#1906=CARTESIAN_POINT('',(2.95,6.36,0.5));+#1907=ORIENTED_EDGE('',*,*,#600,.T.);+#1908=ORIENTED_EDGE('',*,*,#1909,.T.);+#1909=EDGE_CURVE('',#597,#1910,#1912,.T.);+#1910=VERTEX_POINT('',#1911);+#1911=CARTESIAN_POINT('',(3.25,6.14,0.5));+#1912=LINE('',#1913,#27);+#1913=CARTESIAN_POINT('',(2.95,6.14,0.5));+#1914=ORIENTED_EDGE('',*,*,#1915,.F.);+#1915=EDGE_CURVE('',#1903,#1910,#1916,.T.);+#1916=LINE('',#1904,#58);+#1917=PLANE('',#1918);+#1918=AXIS2_PLACEMENT_3D('',#1906,#13,#28);+#1919=ADVANCED_FACE('',(#1920),#1857,.F.);+#1920=FACE_BOUND('',#1921,.F.);+#1921=EDGE_LOOP('',(#1922,#1928,#1929,#1935));+#1922=ORIENTED_EDGE('',*,*,#1923,.F.);+#1923=EDGE_CURVE('',#597,#1924,#1926,.T.);+#1924=VERTEX_POINT('',#1925);+#1925=CARTESIAN_POINT('',(3.05,6.14,0.65));+#1926=LINE('',#1927,#754);+#1927=CARTESIAN_POINT('',(3.05,6.14,0.477669411398));+#1928=ORIENTED_EDGE('',*,*,#596,.T.);+#1929=ORIENTED_EDGE('',*,*,#1930,.T.);+#1930=EDGE_CURVE('',#593,#1931,#1933,.T.);+#1931=VERTEX_POINT('',#1932);+#1932=CARTESIAN_POINT('',(3.05,5.86,0.65));+#1933=LINE('',#1934,#754);+#1934=CARTESIAN_POINT('',(3.05,5.86,0.477669411398));+#1935=ORIENTED_EDGE('',*,*,#1936,.F.);+#1936=EDGE_CURVE('',#1924,#1931,#679,.T.);+#1937=ADVANCED_FACE('',(#1938),#1956,.F.);+#1938=FACE_BOUND('',#1939,.F.);+#1939=EDGE_LOOP('',(#1940,#1946,#1947,#1953));+#1940=ORIENTED_EDGE('',*,*,#1941,.F.);+#1941=EDGE_CURVE('',#593,#1942,#1944,.T.);+#1942=VERTEX_POINT('',#1943);+#1943=CARTESIAN_POINT('',(3.25,5.86,0.5));+#1944=LINE('',#1945,#27);+#1945=CARTESIAN_POINT('',(2.95,5.86,0.5));+#1946=ORIENTED_EDGE('',*,*,#592,.T.);+#1947=ORIENTED_EDGE('',*,*,#1948,.T.);+#1948=EDGE_CURVE('',#589,#1949,#1951,.T.);+#1949=VERTEX_POINT('',#1950);+#1950=CARTESIAN_POINT('',(3.25,5.64,0.5));+#1951=LINE('',#1952,#27);+#1952=CARTESIAN_POINT('',(2.95,5.64,0.5));+#1953=ORIENTED_EDGE('',*,*,#1954,.F.);+#1954=EDGE_CURVE('',#1942,#1949,#1955,.T.);+#1955=LINE('',#1943,#58);+#1956=PLANE('',#1957);+#1957=AXIS2_PLACEMENT_3D('',#1945,#13,#28);+#1958=ADVANCED_FACE('',(#1959),#1857,.F.);+#1959=FACE_BOUND('',#1960,.F.);+#1960=EDGE_LOOP('',(#1961,#1967,#1968,#1974));+#1961=ORIENTED_EDGE('',*,*,#1962,.F.);+#1962=EDGE_CURVE('',#589,#1963,#1965,.T.);+#1963=VERTEX_POINT('',#1964);+#1964=CARTESIAN_POINT('',(3.05,5.64,0.65));+#1965=LINE('',#1966,#754);+#1966=CARTESIAN_POINT('',(3.05,5.64,0.477669411398));+#1967=ORIENTED_EDGE('',*,*,#588,.T.);+#1968=ORIENTED_EDGE('',*,*,#1969,.T.);+#1969=EDGE_CURVE('',#585,#1970,#1972,.T.);+#1970=VERTEX_POINT('',#1971);+#1971=CARTESIAN_POINT('',(3.05,5.36,0.65));+#1972=LINE('',#1973,#754);+#1973=CARTESIAN_POINT('',(3.05,5.36,0.477669411398));+#1974=ORIENTED_EDGE('',*,*,#1975,.F.);+#1975=EDGE_CURVE('',#1963,#1970,#679,.T.);+#1976=ADVANCED_FACE('',(#1977),#1995,.F.);+#1977=FACE_BOUND('',#1978,.F.);+#1978=EDGE_LOOP('',(#1979,#1985,#1986,#1992));+#1979=ORIENTED_EDGE('',*,*,#1980,.F.);+#1980=EDGE_CURVE('',#585,#1981,#1983,.T.);+#1981=VERTEX_POINT('',#1982);+#1982=CARTESIAN_POINT('',(3.25,5.36,0.5));+#1983=LINE('',#1984,#27);+#1984=CARTESIAN_POINT('',(2.95,5.36,0.5));+#1985=ORIENTED_EDGE('',*,*,#584,.T.);+#1986=ORIENTED_EDGE('',*,*,#1987,.T.);+#1987=EDGE_CURVE('',#581,#1988,#1990,.T.);+#1988=VERTEX_POINT('',#1989);+#1989=CARTESIAN_POINT('',(3.25,5.14,0.5));+#1990=LINE('',#1991,#27);+#1991=CARTESIAN_POINT('',(2.95,5.14,0.5));+#1992=ORIENTED_EDGE('',*,*,#1993,.F.);+#1993=EDGE_CURVE('',#1981,#1988,#1994,.T.);+#1994=LINE('',#1982,#58);+#1995=PLANE('',#1996);+#1996=AXIS2_PLACEMENT_3D('',#1984,#13,#28);+#1997=ADVANCED_FACE('',(#1998),#1857,.F.);+#1998=FACE_BOUND('',#1999,.F.);+#1999=EDGE_LOOP('',(#2000,#2006,#2007,#2013));+#2000=ORIENTED_EDGE('',*,*,#2001,.F.);+#2001=EDGE_CURVE('',#581,#2002,#2004,.T.);+#2002=VERTEX_POINT('',#2003);+#2003=CARTESIAN_POINT('',(3.05,5.14,0.65));+#2004=LINE('',#2005,#754);+#2005=CARTESIAN_POINT('',(3.05,5.14,0.477669411398));+#2006=ORIENTED_EDGE('',*,*,#580,.T.);+#2007=ORIENTED_EDGE('',*,*,#2008,.T.);+#2008=EDGE_CURVE('',#577,#2009,#2011,.T.);+#2009=VERTEX_POINT('',#2010);+#2010=CARTESIAN_POINT('',(3.05,4.86,0.65));+#2011=LINE('',#2012,#754);+#2012=CARTESIAN_POINT('',(3.05,4.86,0.477669411398));+#2013=ORIENTED_EDGE('',*,*,#2014,.F.);+#2014=EDGE_CURVE('',#2002,#2009,#679,.T.);+#2015=ADVANCED_FACE('',(#2016),#2034,.F.);+#2016=FACE_BOUND('',#2017,.F.);+#2017=EDGE_LOOP('',(#2018,#2024,#2025,#2031));+#2018=ORIENTED_EDGE('',*,*,#2019,.F.);+#2019=EDGE_CURVE('',#577,#2020,#2022,.T.);+#2020=VERTEX_POINT('',#2021);+#2021=CARTESIAN_POINT('',(3.25,4.86,0.5));+#2022=LINE('',#2023,#27);+#2023=CARTESIAN_POINT('',(2.95,4.86,0.5));+#2024=ORIENTED_EDGE('',*,*,#576,.T.);+#2025=ORIENTED_EDGE('',*,*,#2026,.T.);+#2026=EDGE_CURVE('',#573,#2027,#2029,.T.);+#2027=VERTEX_POINT('',#2028);+#2028=CARTESIAN_POINT('',(3.25,4.64,0.5));+#2029=LINE('',#2030,#27);+#2030=CARTESIAN_POINT('',(2.95,4.64,0.5));+#2031=ORIENTED_EDGE('',*,*,#2032,.F.);+#2032=EDGE_CURVE('',#2020,#2027,#2033,.T.);+#2033=LINE('',#2021,#58);+#2034=PLANE('',#2035);+#2035=AXIS2_PLACEMENT_3D('',#2023,#13,#28);+#2036=ADVANCED_FACE('',(#2037),#1857,.F.);+#2037=FACE_BOUND('',#2038,.F.);+#2038=EDGE_LOOP('',(#2039,#2045,#2046,#2052));+#2039=ORIENTED_EDGE('',*,*,#2040,.F.);+#2040=EDGE_CURVE('',#573,#2041,#2043,.T.);+#2041=VERTEX_POINT('',#2042);+#2042=CARTESIAN_POINT('',(3.05,4.64,0.65));+#2043=LINE('',#2044,#754);+#2044=CARTESIAN_POINT('',(3.05,4.64,0.477669411398));+#2045=ORIENTED_EDGE('',*,*,#572,.T.);+#2046=ORIENTED_EDGE('',*,*,#2047,.T.);+#2047=EDGE_CURVE('',#569,#2048,#2050,.T.);+#2048=VERTEX_POINT('',#2049);+#2049=CARTESIAN_POINT('',(3.05,4.36,0.65));+#2050=LINE('',#2051,#754);+#2051=CARTESIAN_POINT('',(3.05,4.36,0.477669411398));+#2052=ORIENTED_EDGE('',*,*,#2053,.F.);+#2053=EDGE_CURVE('',#2041,#2048,#679,.T.);+#2054=ADVANCED_FACE('',(#2055),#2073,.F.);+#2055=FACE_BOUND('',#2056,.F.);+#2056=EDGE_LOOP('',(#2057,#2063,#2064,#2070));+#2057=ORIENTED_EDGE('',*,*,#2058,.F.);+#2058=EDGE_CURVE('',#569,#2059,#2061,.T.);+#2059=VERTEX_POINT('',#2060);+#2060=CARTESIAN_POINT('',(3.25,4.36,0.5));+#2061=LINE('',#2062,#27);+#2062=CARTESIAN_POINT('',(2.95,4.36,0.5));+#2063=ORIENTED_EDGE('',*,*,#568,.T.);+#2064=ORIENTED_EDGE('',*,*,#2065,.T.);+#2065=EDGE_CURVE('',#565,#2066,#2068,.T.);+#2066=VERTEX_POINT('',#2067);+#2067=CARTESIAN_POINT('',(3.25,4.14,0.5));+#2068=LINE('',#2069,#27);+#2069=CARTESIAN_POINT('',(2.95,4.14,0.5));+#2070=ORIENTED_EDGE('',*,*,#2071,.F.);+#2071=EDGE_CURVE('',#2059,#2066,#2072,.T.);+#2072=LINE('',#2060,#58);+#2073=PLANE('',#2074);+#2074=AXIS2_PLACEMENT_3D('',#2062,#13,#28);+#2075=ADVANCED_FACE('',(#2076),#1857,.F.);+#2076=FACE_BOUND('',#2077,.F.);+#2077=EDGE_LOOP('',(#2078,#2084,#2085,#2091));+#2078=ORIENTED_EDGE('',*,*,#2079,.F.);+#2079=EDGE_CURVE('',#565,#2080,#2082,.T.);+#2080=VERTEX_POINT('',#2081);+#2081=CARTESIAN_POINT('',(3.05,4.14,0.65));+#2082=LINE('',#2083,#754);+#2083=CARTESIAN_POINT('',(3.05,4.14,0.477669411398));+#2084=ORIENTED_EDGE('',*,*,#564,.T.);+#2085=ORIENTED_EDGE('',*,*,#2086,.T.);+#2086=EDGE_CURVE('',#561,#2087,#2089,.T.);+#2087=VERTEX_POINT('',#2088);+#2088=CARTESIAN_POINT('',(3.05,3.86,0.65));+#2089=LINE('',#2090,#754);+#2090=CARTESIAN_POINT('',(3.05,3.86,0.477669411398));+#2091=ORIENTED_EDGE('',*,*,#2092,.F.);+#2092=EDGE_CURVE('',#2080,#2087,#679,.T.);+#2093=ADVANCED_FACE('',(#2094),#2112,.F.);+#2094=FACE_BOUND('',#2095,.F.);+#2095=EDGE_LOOP('',(#2096,#2102,#2103,#2109));+#2096=ORIENTED_EDGE('',*,*,#2097,.F.);+#2097=EDGE_CURVE('',#561,#2098,#2100,.T.);+#2098=VERTEX_POINT('',#2099);+#2099=CARTESIAN_POINT('',(3.25,3.86,0.5));+#2100=LINE('',#2101,#27);+#2101=CARTESIAN_POINT('',(2.95,3.86,0.5));+#2102=ORIENTED_EDGE('',*,*,#560,.T.);+#2103=ORIENTED_EDGE('',*,*,#2104,.T.);+#2104=EDGE_CURVE('',#557,#2105,#2107,.T.);+#2105=VERTEX_POINT('',#2106);+#2106=CARTESIAN_POINT('',(3.25,3.64,0.5));+#2107=LINE('',#2108,#27);+#2108=CARTESIAN_POINT('',(2.95,3.64,0.5));+#2109=ORIENTED_EDGE('',*,*,#2110,.F.);+#2110=EDGE_CURVE('',#2098,#2105,#2111,.T.);+#2111=LINE('',#2099,#58);+#2112=PLANE('',#2113);+#2113=AXIS2_PLACEMENT_3D('',#2101,#13,#28);+#2114=ADVANCED_FACE('',(#2115),#1857,.F.);+#2115=FACE_BOUND('',#2116,.F.);+#2116=EDGE_LOOP('',(#2117,#2123,#2124,#2130));+#2117=ORIENTED_EDGE('',*,*,#2118,.F.);+#2118=EDGE_CURVE('',#557,#2119,#2121,.T.);+#2119=VERTEX_POINT('',#2120);+#2120=CARTESIAN_POINT('',(3.05,3.64,0.65));+#2121=LINE('',#2122,#754);+#2122=CARTESIAN_POINT('',(3.05,3.64,0.477669411398));+#2123=ORIENTED_EDGE('',*,*,#556,.T.);+#2124=ORIENTED_EDGE('',*,*,#2125,.T.);+#2125=EDGE_CURVE('',#553,#2126,#2128,.T.);+#2126=VERTEX_POINT('',#2127);+#2127=CARTESIAN_POINT('',(3.05,3.36,0.65));+#2128=LINE('',#2129,#754);+#2129=CARTESIAN_POINT('',(3.05,3.36,0.477669411398));+#2130=ORIENTED_EDGE('',*,*,#2131,.F.);+#2131=EDGE_CURVE('',#2119,#2126,#679,.T.);+#2132=ADVANCED_FACE('',(#2133),#2151,.F.);+#2133=FACE_BOUND('',#2134,.F.);+#2134=EDGE_LOOP('',(#2135,#2141,#2142,#2148));+#2135=ORIENTED_EDGE('',*,*,#2136,.F.);+#2136=EDGE_CURVE('',#553,#2137,#2139,.T.);+#2137=VERTEX_POINT('',#2138);+#2138=CARTESIAN_POINT('',(3.25,3.36,0.5));+#2139=LINE('',#2140,#27);+#2140=CARTESIAN_POINT('',(2.95,3.36,0.5));+#2141=ORIENTED_EDGE('',*,*,#552,.T.);+#2142=ORIENTED_EDGE('',*,*,#2143,.T.);+#2143=EDGE_CURVE('',#549,#2144,#2146,.T.);+#2144=VERTEX_POINT('',#2145);+#2145=CARTESIAN_POINT('',(3.25,3.14,0.5));+#2146=LINE('',#2147,#27);+#2147=CARTESIAN_POINT('',(2.95,3.14,0.5));+#2148=ORIENTED_EDGE('',*,*,#2149,.F.);+#2149=EDGE_CURVE('',#2137,#2144,#2150,.T.);+#2150=LINE('',#2138,#58);+#2151=PLANE('',#2152);+#2152=AXIS2_PLACEMENT_3D('',#2140,#13,#28);+#2153=ADVANCED_FACE('',(#2154),#1857,.F.);+#2154=FACE_BOUND('',#2155,.F.);+#2155=EDGE_LOOP('',(#2156,#2162,#2163,#2169));+#2156=ORIENTED_EDGE('',*,*,#2157,.F.);+#2157=EDGE_CURVE('',#549,#2158,#2160,.T.);+#2158=VERTEX_POINT('',#2159);+#2159=CARTESIAN_POINT('',(3.05,3.14,0.65));+#2160=LINE('',#2161,#754);+#2161=CARTESIAN_POINT('',(3.05,3.14,0.477669411398));+#2162=ORIENTED_EDGE('',*,*,#548,.T.);+#2163=ORIENTED_EDGE('',*,*,#2164,.T.);+#2164=EDGE_CURVE('',#545,#2165,#2167,.T.);+#2165=VERTEX_POINT('',#2166);+#2166=CARTESIAN_POINT('',(3.05,2.86,0.65));+#2167=LINE('',#2168,#754);+#2168=CARTESIAN_POINT('',(3.05,2.86,0.477669411398));+#2169=ORIENTED_EDGE('',*,*,#2170,.F.);+#2170=EDGE_CURVE('',#2158,#2165,#679,.T.);+#2171=ADVANCED_FACE('',(#2172),#2190,.F.);+#2172=FACE_BOUND('',#2173,.F.);+#2173=EDGE_LOOP('',(#2174,#2180,#2181,#2187));+#2174=ORIENTED_EDGE('',*,*,#2175,.F.);+#2175=EDGE_CURVE('',#545,#2176,#2178,.T.);+#2176=VERTEX_POINT('',#2177);+#2177=CARTESIAN_POINT('',(3.25,2.86,0.5));+#2178=LINE('',#2179,#27);+#2179=CARTESIAN_POINT('',(2.95,2.86,0.5));+#2180=ORIENTED_EDGE('',*,*,#544,.T.);+#2181=ORIENTED_EDGE('',*,*,#2182,.T.);+#2182=EDGE_CURVE('',#541,#2183,#2185,.T.);+#2183=VERTEX_POINT('',#2184);+#2184=CARTESIAN_POINT('',(3.25,2.64,0.5));+#2185=LINE('',#2186,#27);+#2186=CARTESIAN_POINT('',(2.95,2.64,0.5));+#2187=ORIENTED_EDGE('',*,*,#2188,.F.);+#2188=EDGE_CURVE('',#2176,#2183,#2189,.T.);+#2189=LINE('',#2177,#58);+#2190=PLANE('',#2191);+#2191=AXIS2_PLACEMENT_3D('',#2179,#13,#28);+#2192=ADVANCED_FACE('',(#2193),#1857,.F.);+#2193=FACE_BOUND('',#2194,.F.);+#2194=EDGE_LOOP('',(#2195,#2201,#2202,#2208));+#2195=ORIENTED_EDGE('',*,*,#2196,.F.);+#2196=EDGE_CURVE('',#541,#2197,#2199,.T.);+#2197=VERTEX_POINT('',#2198);+#2198=CARTESIAN_POINT('',(3.05,2.64,0.65));+#2199=LINE('',#2200,#754);+#2200=CARTESIAN_POINT('',(3.05,2.64,0.477669411398));+#2201=ORIENTED_EDGE('',*,*,#540,.T.);+#2202=ORIENTED_EDGE('',*,*,#2203,.T.);+#2203=EDGE_CURVE('',#537,#2204,#2206,.T.);+#2204=VERTEX_POINT('',#2205);+#2205=CARTESIAN_POINT('',(3.05,2.36,0.65));+#2206=LINE('',#2207,#754);+#2207=CARTESIAN_POINT('',(3.05,2.36,0.477669411398));+#2208=ORIENTED_EDGE('',*,*,#2209,.F.);+#2209=EDGE_CURVE('',#2197,#2204,#679,.T.);+#2210=ADVANCED_FACE('',(#2211),#2229,.F.);+#2211=FACE_BOUND('',#2212,.F.);+#2212=EDGE_LOOP('',(#2213,#2219,#2220,#2226));+#2213=ORIENTED_EDGE('',*,*,#2214,.F.);+#2214=EDGE_CURVE('',#537,#2215,#2217,.T.);+#2215=VERTEX_POINT('',#2216);+#2216=CARTESIAN_POINT('',(3.25,2.36,0.5));+#2217=LINE('',#2218,#27);+#2218=CARTESIAN_POINT('',(2.95,2.36,0.5));+#2219=ORIENTED_EDGE('',*,*,#536,.T.);+#2220=ORIENTED_EDGE('',*,*,#2221,.T.);+#2221=EDGE_CURVE('',#533,#2222,#2224,.T.);+#2222=VERTEX_POINT('',#2223);+#2223=CARTESIAN_POINT('',(3.25,2.14,0.5));+#2224=LINE('',#2225,#27);+#2225=CARTESIAN_POINT('',(2.95,2.14,0.5));+#2226=ORIENTED_EDGE('',*,*,#2227,.F.);+#2227=EDGE_CURVE('',#2215,#2222,#2228,.T.);+#2228=LINE('',#2216,#58);+#2229=PLANE('',#2230);+#2230=AXIS2_PLACEMENT_3D('',#2218,#13,#28);+#2231=ADVANCED_FACE('',(#2232),#1857,.F.);+#2232=FACE_BOUND('',#2233,.F.);+#2233=EDGE_LOOP('',(#2234,#2240,#2241,#2247));+#2234=ORIENTED_EDGE('',*,*,#2235,.F.);+#2235=EDGE_CURVE('',#533,#2236,#2238,.T.);+#2236=VERTEX_POINT('',#2237);+#2237=CARTESIAN_POINT('',(3.05,2.14,0.65));+#2238=LINE('',#2239,#754);+#2239=CARTESIAN_POINT('',(3.05,2.14,0.477669411398));+#2240=ORIENTED_EDGE('',*,*,#532,.T.);+#2241=ORIENTED_EDGE('',*,*,#2242,.T.);+#2242=EDGE_CURVE('',#529,#2243,#2245,.T.);+#2243=VERTEX_POINT('',#2244);+#2244=CARTESIAN_POINT('',(3.05,1.86,0.65));+#2245=LINE('',#2246,#754);+#2246=CARTESIAN_POINT('',(3.05,1.86,0.477669411398));+#2247=ORIENTED_EDGE('',*,*,#2248,.F.);+#2248=EDGE_CURVE('',#2236,#2243,#679,.T.);+#2249=ADVANCED_FACE('',(#2250),#2268,.F.);+#2250=FACE_BOUND('',#2251,.F.);+#2251=EDGE_LOOP('',(#2252,#2258,#2259,#2265));+#2252=ORIENTED_EDGE('',*,*,#2253,.F.);+#2253=EDGE_CURVE('',#529,#2254,#2256,.T.);+#2254=VERTEX_POINT('',#2255);+#2255=CARTESIAN_POINT('',(3.25,1.86,0.5));+#2256=LINE('',#2257,#27);+#2257=CARTESIAN_POINT('',(2.95,1.86,0.5));+#2258=ORIENTED_EDGE('',*,*,#528,.T.);+#2259=ORIENTED_EDGE('',*,*,#2260,.T.);+#2260=EDGE_CURVE('',#525,#2261,#2263,.T.);+#2261=VERTEX_POINT('',#2262);+#2262=CARTESIAN_POINT('',(3.25,1.64,0.5));+#2263=LINE('',#2264,#27);+#2264=CARTESIAN_POINT('',(2.95,1.64,0.5));+#2265=ORIENTED_EDGE('',*,*,#2266,.F.);+#2266=EDGE_CURVE('',#2254,#2261,#2267,.T.);+#2267=LINE('',#2255,#58);+#2268=PLANE('',#2269);+#2269=AXIS2_PLACEMENT_3D('',#2257,#13,#28);+#2270=ADVANCED_FACE('',(#2271),#1857,.F.);+#2271=FACE_BOUND('',#2272,.F.);+#2272=EDGE_LOOP('',(#2273,#2279,#2280,#2286));+#2273=ORIENTED_EDGE('',*,*,#2274,.F.);+#2274=EDGE_CURVE('',#525,#2275,#2277,.T.);+#2275=VERTEX_POINT('',#2276);+#2276=CARTESIAN_POINT('',(3.05,1.64,0.65));+#2277=LINE('',#2278,#754);+#2278=CARTESIAN_POINT('',(3.05,1.64,0.477669411398));+#2279=ORIENTED_EDGE('',*,*,#524,.T.);+#2280=ORIENTED_EDGE('',*,*,#2281,.T.);+#2281=EDGE_CURVE('',#521,#2282,#2284,.T.);+#2282=VERTEX_POINT('',#2283);+#2283=CARTESIAN_POINT('',(3.05,1.36,0.65));+#2284=LINE('',#2285,#754);+#2285=CARTESIAN_POINT('',(3.05,1.36,0.477669411398));+#2286=ORIENTED_EDGE('',*,*,#2287,.F.);+#2287=EDGE_CURVE('',#2275,#2282,#679,.T.);+#2288=ADVANCED_FACE('',(#2289),#2307,.F.);+#2289=FACE_BOUND('',#2290,.F.);+#2290=EDGE_LOOP('',(#2291,#2297,#2298,#2304));+#2291=ORIENTED_EDGE('',*,*,#2292,.F.);+#2292=EDGE_CURVE('',#521,#2293,#2295,.T.);+#2293=VERTEX_POINT('',#2294);+#2294=CARTESIAN_POINT('',(3.25,1.36,0.5));+#2295=LINE('',#2296,#27);+#2296=CARTESIAN_POINT('',(2.95,1.36,0.5));+#2297=ORIENTED_EDGE('',*,*,#520,.T.);+#2298=ORIENTED_EDGE('',*,*,#2299,.T.);+#2299=EDGE_CURVE('',#517,#2300,#2302,.T.);+#2300=VERTEX_POINT('',#2301);+#2301=CARTESIAN_POINT('',(3.25,1.14,0.5));+#2302=LINE('',#2303,#27);+#2303=CARTESIAN_POINT('',(2.95,1.14,0.5));+#2304=ORIENTED_EDGE('',*,*,#2305,.F.);+#2305=EDGE_CURVE('',#2293,#2300,#2306,.T.);+#2306=LINE('',#2294,#58);+#2307=PLANE('',#2308);+#2308=AXIS2_PLACEMENT_3D('',#2296,#13,#28);+#2309=ADVANCED_FACE('',(#2310),#1857,.F.);+#2310=FACE_BOUND('',#2311,.F.);+#2311=EDGE_LOOP('',(#2312,#2318,#2319,#2325));+#2312=ORIENTED_EDGE('',*,*,#2313,.F.);+#2313=EDGE_CURVE('',#517,#2314,#2316,.T.);+#2314=VERTEX_POINT('',#2315);+#2315=CARTESIAN_POINT('',(3.05,1.14,0.65));+#2316=LINE('',#2317,#754);+#2317=CARTESIAN_POINT('',(3.05,1.14,0.477669411398));+#2318=ORIENTED_EDGE('',*,*,#516,.T.);+#2319=ORIENTED_EDGE('',*,*,#2320,.T.);+#2320=EDGE_CURVE('',#513,#2321,#2323,.T.);+#2321=VERTEX_POINT('',#2322);+#2322=CARTESIAN_POINT('',(3.05,0.86,0.65));+#2323=LINE('',#2324,#754);+#2324=CARTESIAN_POINT('',(3.05,0.86,0.477669411398));+#2325=ORIENTED_EDGE('',*,*,#2326,.F.);+#2326=EDGE_CURVE('',#2314,#2321,#679,.T.);+#2327=ADVANCED_FACE('',(#2328),#2346,.F.);+#2328=FACE_BOUND('',#2329,.F.);+#2329=EDGE_LOOP('',(#2330,#2336,#2337,#2343));+#2330=ORIENTED_EDGE('',*,*,#2331,.F.);+#2331=EDGE_CURVE('',#513,#2332,#2334,.T.);+#2332=VERTEX_POINT('',#2333);+#2333=CARTESIAN_POINT('',(3.25,0.86,0.5));+#2334=LINE('',#2335,#27);+#2335=CARTESIAN_POINT('',(2.95,0.86,0.5));+#2336=ORIENTED_EDGE('',*,*,#512,.T.);+#2337=ORIENTED_EDGE('',*,*,#2338,.T.);+#2338=EDGE_CURVE('',#509,#2339,#2341,.T.);+#2339=VERTEX_POINT('',#2340);+#2340=CARTESIAN_POINT('',(3.25,0.64,0.5));+#2341=LINE('',#2342,#27);+#2342=CARTESIAN_POINT('',(2.95,0.64,0.5));+#2343=ORIENTED_EDGE('',*,*,#2344,.F.);+#2344=EDGE_CURVE('',#2332,#2339,#2345,.T.);+#2345=LINE('',#2333,#58);+#2346=PLANE('',#2347);+#2347=AXIS2_PLACEMENT_3D('',#2335,#13,#28);+#2348=ADVANCED_FACE('',(#2349),#1857,.F.);+#2349=FACE_BOUND('',#2350,.F.);+#2350=EDGE_LOOP('',(#2351,#2357,#2358,#2364));+#2351=ORIENTED_EDGE('',*,*,#2352,.F.);+#2352=EDGE_CURVE('',#509,#2353,#2355,.T.);+#2353=VERTEX_POINT('',#2354);+#2354=CARTESIAN_POINT('',(3.05,0.64,0.65));+#2355=LINE('',#2356,#754);+#2356=CARTESIAN_POINT('',(3.05,0.64,0.477669411398));+#2357=ORIENTED_EDGE('',*,*,#508,.T.);+#2358=ORIENTED_EDGE('',*,*,#2359,.T.);+#2359=EDGE_CURVE('',#505,#2360,#2362,.T.);+#2360=VERTEX_POINT('',#2361);+#2361=CARTESIAN_POINT('',(3.05,0.36,0.65));+#2362=LINE('',#2363,#754);+#2363=CARTESIAN_POINT('',(3.05,0.36,0.477669411398));+#2364=ORIENTED_EDGE('',*,*,#2365,.F.);+#2365=EDGE_CURVE('',#2353,#2360,#679,.T.);+#2366=ADVANCED_FACE('',(#2367),#2385,.F.);+#2367=FACE_BOUND('',#2368,.F.);+#2368=EDGE_LOOP('',(#2369,#2375,#2376,#2382));+#2369=ORIENTED_EDGE('',*,*,#2370,.F.);+#2370=EDGE_CURVE('',#505,#2371,#2373,.T.);+#2371=VERTEX_POINT('',#2372);+#2372=CARTESIAN_POINT('',(3.25,0.36,0.5));+#2373=LINE('',#2374,#27);+#2374=CARTESIAN_POINT('',(2.95,0.36,0.5));+#2375=ORIENTED_EDGE('',*,*,#504,.T.);+#2376=ORIENTED_EDGE('',*,*,#2377,.T.);+#2377=EDGE_CURVE('',#501,#2378,#2380,.T.);+#2378=VERTEX_POINT('',#2379);+#2379=CARTESIAN_POINT('',(3.25,0.14,0.5));+#2380=LINE('',#2381,#27);+#2381=CARTESIAN_POINT('',(2.95,0.14,0.5));+#2382=ORIENTED_EDGE('',*,*,#2383,.F.);+#2383=EDGE_CURVE('',#2371,#2378,#2384,.T.);+#2384=LINE('',#2372,#58);+#2385=PLANE('',#2386);+#2386=AXIS2_PLACEMENT_3D('',#2374,#13,#28);+#2387=ADVANCED_FACE('',(#2388),#1857,.F.);+#2388=FACE_BOUND('',#2389,.F.);+#2389=EDGE_LOOP('',(#2390,#2396,#2397,#2403));+#2390=ORIENTED_EDGE('',*,*,#2391,.F.);+#2391=EDGE_CURVE('',#501,#2392,#2394,.T.);+#2392=VERTEX_POINT('',#2393);+#2393=CARTESIAN_POINT('',(3.05,0.14,0.65));+#2394=LINE('',#2395,#754);+#2395=CARTESIAN_POINT('',(3.05,0.14,0.477669411398));+#2396=ORIENTED_EDGE('',*,*,#500,.T.);+#2397=ORIENTED_EDGE('',*,*,#2398,.T.);+#2398=EDGE_CURVE('',#497,#2399,#2401,.T.);+#2399=VERTEX_POINT('',#2400);+#2400=CARTESIAN_POINT('',(3.05,-0.14,0.65));+#2401=LINE('',#2402,#754);+#2402=CARTESIAN_POINT('',(3.05,-0.14,0.477669411398));+#2403=ORIENTED_EDGE('',*,*,#2404,.F.);+#2404=EDGE_CURVE('',#2392,#2399,#679,.T.);+#2405=ADVANCED_FACE('',(#2406),#2424,.F.);+#2406=FACE_BOUND('',#2407,.F.);+#2407=EDGE_LOOP('',(#2408,#2414,#2415,#2421));+#2408=ORIENTED_EDGE('',*,*,#2409,.F.);+#2409=EDGE_CURVE('',#497,#2410,#2412,.T.);+#2410=VERTEX_POINT('',#2411);+#2411=CARTESIAN_POINT('',(3.25,-0.14,0.5));+#2412=LINE('',#2413,#27);+#2413=CARTESIAN_POINT('',(2.95,-0.14,0.5));+#2414=ORIENTED_EDGE('',*,*,#496,.T.);+#2415=ORIENTED_EDGE('',*,*,#2416,.T.);+#2416=EDGE_CURVE('',#493,#2417,#2419,.T.);+#2417=VERTEX_POINT('',#2418);+#2418=CARTESIAN_POINT('',(3.25,-0.36,0.5));+#2419=LINE('',#2420,#27);+#2420=CARTESIAN_POINT('',(2.95,-0.36,0.5));+#2421=ORIENTED_EDGE('',*,*,#2422,.F.);+#2422=EDGE_CURVE('',#2410,#2417,#2423,.T.);+#2423=LINE('',#2411,#58);+#2424=PLANE('',#2425);+#2425=AXIS2_PLACEMENT_3D('',#2413,#13,#28);+#2426=ADVANCED_FACE('',(#2427),#1857,.F.);+#2427=FACE_BOUND('',#2428,.F.);+#2428=EDGE_LOOP('',(#2429,#2435,#2436,#2442));+#2429=ORIENTED_EDGE('',*,*,#2430,.F.);+#2430=EDGE_CURVE('',#493,#2431,#2433,.T.);+#2431=VERTEX_POINT('',#2432);+#2432=CARTESIAN_POINT('',(3.05,-0.36,0.65));+#2433=LINE('',#2434,#754);+#2434=CARTESIAN_POINT('',(3.05,-0.36,0.477669411398));+#2435=ORIENTED_EDGE('',*,*,#492,.T.);+#2436=ORIENTED_EDGE('',*,*,#2437,.T.);+#2437=EDGE_CURVE('',#489,#2438,#2440,.T.);+#2438=VERTEX_POINT('',#2439);+#2439=CARTESIAN_POINT('',(3.05,-0.64,0.65));+#2440=LINE('',#2441,#754);+#2441=CARTESIAN_POINT('',(3.05,-0.64,0.477669411398));+#2442=ORIENTED_EDGE('',*,*,#2443,.F.);+#2443=EDGE_CURVE('',#2431,#2438,#679,.T.);+#2444=ADVANCED_FACE('',(#2445),#2463,.F.);+#2445=FACE_BOUND('',#2446,.F.);+#2446=EDGE_LOOP('',(#2447,#2453,#2454,#2460));+#2447=ORIENTED_EDGE('',*,*,#2448,.F.);+#2448=EDGE_CURVE('',#489,#2449,#2451,.T.);+#2449=VERTEX_POINT('',#2450);+#2450=CARTESIAN_POINT('',(3.25,-0.64,0.5));+#2451=LINE('',#2452,#27);+#2452=CARTESIAN_POINT('',(2.95,-0.64,0.5));+#2453=ORIENTED_EDGE('',*,*,#488,.T.);+#2454=ORIENTED_EDGE('',*,*,#2455,.T.);+#2455=EDGE_CURVE('',#485,#2456,#2458,.T.);+#2456=VERTEX_POINT('',#2457);+#2457=CARTESIAN_POINT('',(3.25,-0.86,0.5));+#2458=LINE('',#2459,#27);+#2459=CARTESIAN_POINT('',(2.95,-0.86,0.5));+#2460=ORIENTED_EDGE('',*,*,#2461,.F.);+#2461=EDGE_CURVE('',#2449,#2456,#2462,.T.);+#2462=LINE('',#2450,#58);+#2463=PLANE('',#2464);+#2464=AXIS2_PLACEMENT_3D('',#2452,#13,#28);+#2465=ADVANCED_FACE('',(#2466),#1857,.F.);+#2466=FACE_BOUND('',#2467,.F.);+#2467=EDGE_LOOP('',(#2468,#2474,#2475,#2481));+#2468=ORIENTED_EDGE('',*,*,#2469,.F.);+#2469=EDGE_CURVE('',#485,#2470,#2472,.T.);+#2470=VERTEX_POINT('',#2471);+#2471=CARTESIAN_POINT('',(3.05,-0.86,0.65));+#2472=LINE('',#2473,#754);+#2473=CARTESIAN_POINT('',(3.05,-0.86,0.477669411398));+#2474=ORIENTED_EDGE('',*,*,#484,.T.);+#2475=ORIENTED_EDGE('',*,*,#2476,.T.);+#2476=EDGE_CURVE('',#481,#2477,#2479,.T.);+#2477=VERTEX_POINT('',#2478);+#2478=CARTESIAN_POINT('',(3.05,-1.14,0.65));+#2479=LINE('',#2480,#754);+#2480=CARTESIAN_POINT('',(3.05,-1.14,0.477669411398));+#2481=ORIENTED_EDGE('',*,*,#2482,.F.);+#2482=EDGE_CURVE('',#2470,#2477,#679,.T.);+#2483=ADVANCED_FACE('',(#2484),#2502,.F.);+#2484=FACE_BOUND('',#2485,.F.);+#2485=EDGE_LOOP('',(#2486,#2492,#2493,#2499));+#2486=ORIENTED_EDGE('',*,*,#2487,.F.);+#2487=EDGE_CURVE('',#481,#2488,#2490,.T.);+#2488=VERTEX_POINT('',#2489);+#2489=CARTESIAN_POINT('',(3.25,-1.14,0.5));+#2490=LINE('',#2491,#27);+#2491=CARTESIAN_POINT('',(2.95,-1.14,0.5));+#2492=ORIENTED_EDGE('',*,*,#480,.T.);+#2493=ORIENTED_EDGE('',*,*,#2494,.T.);+#2494=EDGE_CURVE('',#477,#2495,#2497,.T.);+#2495=VERTEX_POINT('',#2496);+#2496=CARTESIAN_POINT('',(3.25,-1.36,0.5));+#2497=LINE('',#2498,#27);+#2498=CARTESIAN_POINT('',(2.95,-1.36,0.5));+#2499=ORIENTED_EDGE('',*,*,#2500,.F.);+#2500=EDGE_CURVE('',#2488,#2495,#2501,.T.);+#2501=LINE('',#2489,#58);+#2502=PLANE('',#2503);+#2503=AXIS2_PLACEMENT_3D('',#2491,#13,#28);+#2504=ADVANCED_FACE('',(#2505),#1857,.F.);+#2505=FACE_BOUND('',#2506,.F.);+#2506=EDGE_LOOP('',(#2507,#2513,#2514,#2520));+#2507=ORIENTED_EDGE('',*,*,#2508,.F.);+#2508=EDGE_CURVE('',#477,#2509,#2511,.T.);+#2509=VERTEX_POINT('',#2510);+#2510=CARTESIAN_POINT('',(3.05,-1.36,0.65));+#2511=LINE('',#2512,#754);+#2512=CARTESIAN_POINT('',(3.05,-1.36,0.477669411398));+#2513=ORIENTED_EDGE('',*,*,#476,.T.);+#2514=ORIENTED_EDGE('',*,*,#2515,.T.);+#2515=EDGE_CURVE('',#473,#2516,#2518,.T.);+#2516=VERTEX_POINT('',#2517);+#2517=CARTESIAN_POINT('',(3.05,-1.64,0.65));+#2518=LINE('',#2519,#754);+#2519=CARTESIAN_POINT('',(3.05,-1.64,0.477669411398));+#2520=ORIENTED_EDGE('',*,*,#2521,.F.);+#2521=EDGE_CURVE('',#2509,#2516,#679,.T.);+#2522=ADVANCED_FACE('',(#2523),#2541,.F.);+#2523=FACE_BOUND('',#2524,.F.);+#2524=EDGE_LOOP('',(#2525,#2531,#2532,#2538));+#2525=ORIENTED_EDGE('',*,*,#2526,.F.);+#2526=EDGE_CURVE('',#473,#2527,#2529,.T.);+#2527=VERTEX_POINT('',#2528);+#2528=CARTESIAN_POINT('',(3.25,-1.64,0.5));+#2529=LINE('',#2530,#27);+#2530=CARTESIAN_POINT('',(2.95,-1.64,0.5));+#2531=ORIENTED_EDGE('',*,*,#472,.T.);+#2532=ORIENTED_EDGE('',*,*,#2533,.T.);+#2533=EDGE_CURVE('',#469,#2534,#2536,.T.);+#2534=VERTEX_POINT('',#2535);+#2535=CARTESIAN_POINT('',(3.25,-1.86,0.5));+#2536=LINE('',#2537,#27);+#2537=CARTESIAN_POINT('',(2.95,-1.86,0.5));+#2538=ORIENTED_EDGE('',*,*,#2539,.F.);+#2539=EDGE_CURVE('',#2527,#2534,#2540,.T.);+#2540=LINE('',#2528,#58);+#2541=PLANE('',#2542);+#2542=AXIS2_PLACEMENT_3D('',#2530,#13,#28);+#2543=ADVANCED_FACE('',(#2544),#1857,.F.);+#2544=FACE_BOUND('',#2545,.F.);+#2545=EDGE_LOOP('',(#2546,#2552,#2553,#2559));+#2546=ORIENTED_EDGE('',*,*,#2547,.F.);+#2547=EDGE_CURVE('',#469,#2548,#2550,.T.);+#2548=VERTEX_POINT('',#2549);+#2549=CARTESIAN_POINT('',(3.05,-1.86,0.65));+#2550=LINE('',#2551,#754);+#2551=CARTESIAN_POINT('',(3.05,-1.86,0.477669411398));+#2552=ORIENTED_EDGE('',*,*,#468,.T.);+#2553=ORIENTED_EDGE('',*,*,#2554,.T.);+#2554=EDGE_CURVE('',#465,#2555,#2557,.T.);+#2555=VERTEX_POINT('',#2556);+#2556=CARTESIAN_POINT('',(3.05,-2.14,0.65));+#2557=LINE('',#2558,#754);+#2558=CARTESIAN_POINT('',(3.05,-2.14,0.477669411398));+#2559=ORIENTED_EDGE('',*,*,#2560,.F.);+#2560=EDGE_CURVE('',#2548,#2555,#679,.T.);+#2561=ADVANCED_FACE('',(#2562),#2580,.F.);+#2562=FACE_BOUND('',#2563,.F.);+#2563=EDGE_LOOP('',(#2564,#2570,#2571,#2577));+#2564=ORIENTED_EDGE('',*,*,#2565,.F.);+#2565=EDGE_CURVE('',#465,#2566,#2568,.T.);+#2566=VERTEX_POINT('',#2567);+#2567=CARTESIAN_POINT('',(3.25,-2.14,0.5));+#2568=LINE('',#2569,#27);+#2569=CARTESIAN_POINT('',(2.95,-2.14,0.5));+#2570=ORIENTED_EDGE('',*,*,#464,.T.);+#2571=ORIENTED_EDGE('',*,*,#2572,.T.);+#2572=EDGE_CURVE('',#461,#2573,#2575,.T.);+#2573=VERTEX_POINT('',#2574);+#2574=CARTESIAN_POINT('',(3.25,-2.36,0.5));+#2575=LINE('',#2576,#27);+#2576=CARTESIAN_POINT('',(2.95,-2.36,0.5));+#2577=ORIENTED_EDGE('',*,*,#2578,.F.);+#2578=EDGE_CURVE('',#2566,#2573,#2579,.T.);+#2579=LINE('',#2567,#58);+#2580=PLANE('',#2581);+#2581=AXIS2_PLACEMENT_3D('',#2569,#13,#28);+#2582=ADVANCED_FACE('',(#2583),#1857,.F.);+#2583=FACE_BOUND('',#2584,.F.);+#2584=EDGE_LOOP('',(#2585,#2591,#2592,#2598));+#2585=ORIENTED_EDGE('',*,*,#2586,.F.);+#2586=EDGE_CURVE('',#461,#2587,#2589,.T.);+#2587=VERTEX_POINT('',#2588);+#2588=CARTESIAN_POINT('',(3.05,-2.36,0.65));+#2589=LINE('',#2590,#754);+#2590=CARTESIAN_POINT('',(3.05,-2.36,0.477669411398));+#2591=ORIENTED_EDGE('',*,*,#460,.T.);+#2592=ORIENTED_EDGE('',*,*,#2593,.T.);+#2593=EDGE_CURVE('',#457,#2594,#2596,.T.);+#2594=VERTEX_POINT('',#2595);+#2595=CARTESIAN_POINT('',(3.05,-2.64,0.65));+#2596=LINE('',#2597,#754);+#2597=CARTESIAN_POINT('',(3.05,-2.64,0.477669411398));+#2598=ORIENTED_EDGE('',*,*,#2599,.F.);+#2599=EDGE_CURVE('',#2587,#2594,#679,.T.);+#2600=ADVANCED_FACE('',(#2601),#2619,.F.);+#2601=FACE_BOUND('',#2602,.F.);+#2602=EDGE_LOOP('',(#2603,#2609,#2610,#2616));+#2603=ORIENTED_EDGE('',*,*,#2604,.F.);+#2604=EDGE_CURVE('',#457,#2605,#2607,.T.);+#2605=VERTEX_POINT('',#2606);+#2606=CARTESIAN_POINT('',(3.25,-2.64,0.5));+#2607=LINE('',#2608,#27);+#2608=CARTESIAN_POINT('',(2.95,-2.64,0.5));+#2609=ORIENTED_EDGE('',*,*,#456,.T.);+#2610=ORIENTED_EDGE('',*,*,#2611,.T.);+#2611=EDGE_CURVE('',#453,#2612,#2614,.T.);+#2612=VERTEX_POINT('',#2613);+#2613=CARTESIAN_POINT('',(3.25,-2.86,0.5));+#2614=LINE('',#2615,#27);+#2615=CARTESIAN_POINT('',(2.95,-2.86,0.5));+#2616=ORIENTED_EDGE('',*,*,#2617,.F.);+#2617=EDGE_CURVE('',#2605,#2612,#2618,.T.);+#2618=LINE('',#2606,#58);+#2619=PLANE('',#2620);+#2620=AXIS2_PLACEMENT_3D('',#2608,#13,#28);+#2621=ADVANCED_FACE('',(#2622),#1857,.F.);+#2622=FACE_BOUND('',#2623,.F.);+#2623=EDGE_LOOP('',(#2624,#2630,#2631,#2637));+#2624=ORIENTED_EDGE('',*,*,#2625,.F.);+#2625=EDGE_CURVE('',#453,#2626,#2628,.T.);+#2626=VERTEX_POINT('',#2627);+#2627=CARTESIAN_POINT('',(3.05,-2.86,0.65));+#2628=LINE('',#2629,#754);+#2629=CARTESIAN_POINT('',(3.05,-2.86,0.477669411398));+#2630=ORIENTED_EDGE('',*,*,#452,.T.);+#2631=ORIENTED_EDGE('',*,*,#2632,.T.);+#2632=EDGE_CURVE('',#449,#2633,#2635,.T.);+#2633=VERTEX_POINT('',#2634);+#2634=CARTESIAN_POINT('',(3.05,-3.14,0.65));+#2635=LINE('',#2636,#754);+#2636=CARTESIAN_POINT('',(3.05,-3.14,0.477669411398));+#2637=ORIENTED_EDGE('',*,*,#2638,.F.);+#2638=EDGE_CURVE('',#2626,#2633,#679,.T.);+#2639=ADVANCED_FACE('',(#2640),#2658,.F.);+#2640=FACE_BOUND('',#2641,.F.);+#2641=EDGE_LOOP('',(#2642,#2648,#2649,#2655));+#2642=ORIENTED_EDGE('',*,*,#2643,.F.);+#2643=EDGE_CURVE('',#449,#2644,#2646,.T.);+#2644=VERTEX_POINT('',#2645);+#2645=CARTESIAN_POINT('',(3.25,-3.14,0.5));+#2646=LINE('',#2647,#27);+#2647=CARTESIAN_POINT('',(2.95,-3.14,0.5));+#2648=ORIENTED_EDGE('',*,*,#448,.T.);+#2649=ORIENTED_EDGE('',*,*,#2650,.T.);+#2650=EDGE_CURVE('',#445,#2651,#2653,.T.);+#2651=VERTEX_POINT('',#2652);+#2652=CARTESIAN_POINT('',(3.25,-3.36,0.5));+#2653=LINE('',#2654,#27);+#2654=CARTESIAN_POINT('',(2.95,-3.36,0.5));+#2655=ORIENTED_EDGE('',*,*,#2656,.F.);+#2656=EDGE_CURVE('',#2644,#2651,#2657,.T.);+#2657=LINE('',#2645,#58);+#2658=PLANE('',#2659);+#2659=AXIS2_PLACEMENT_3D('',#2647,#13,#28);+#2660=ADVANCED_FACE('',(#2661),#1857,.F.);+#2661=FACE_BOUND('',#2662,.F.);+#2662=EDGE_LOOP('',(#2663,#2669,#2670,#2676));+#2663=ORIENTED_EDGE('',*,*,#2664,.F.);+#2664=EDGE_CURVE('',#445,#2665,#2667,.T.);+#2665=VERTEX_POINT('',#2666);+#2666=CARTESIAN_POINT('',(3.05,-3.36,0.65));+#2667=LINE('',#2668,#754);+#2668=CARTESIAN_POINT('',(3.05,-3.36,0.477669411398));+#2669=ORIENTED_EDGE('',*,*,#444,.T.);+#2670=ORIENTED_EDGE('',*,*,#2671,.T.);+#2671=EDGE_CURVE('',#441,#2672,#2674,.T.);+#2672=VERTEX_POINT('',#2673);+#2673=CARTESIAN_POINT('',(3.05,-3.64,0.65));+#2674=LINE('',#2675,#754);+#2675=CARTESIAN_POINT('',(3.05,-3.64,0.477669411398));+#2676=ORIENTED_EDGE('',*,*,#2677,.F.);+#2677=EDGE_CURVE('',#2665,#2672,#679,.T.);+#2678=ADVANCED_FACE('',(#2679),#2697,.F.);+#2679=FACE_BOUND('',#2680,.F.);+#2680=EDGE_LOOP('',(#2681,#2687,#2688,#2694));+#2681=ORIENTED_EDGE('',*,*,#2682,.F.);+#2682=EDGE_CURVE('',#441,#2683,#2685,.T.);+#2683=VERTEX_POINT('',#2684);+#2684=CARTESIAN_POINT('',(3.25,-3.64,0.5));+#2685=LINE('',#2686,#27);+#2686=CARTESIAN_POINT('',(2.95,-3.64,0.5));+#2687=ORIENTED_EDGE('',*,*,#440,.T.);+#2688=ORIENTED_EDGE('',*,*,#2689,.T.);+#2689=EDGE_CURVE('',#437,#2690,#2692,.T.);+#2690=VERTEX_POINT('',#2691);+#2691=CARTESIAN_POINT('',(3.25,-3.86,0.5));+#2692=LINE('',#2693,#27);+#2693=CARTESIAN_POINT('',(2.95,-3.86,0.5));+#2694=ORIENTED_EDGE('',*,*,#2695,.F.);+#2695=EDGE_CURVE('',#2683,#2690,#2696,.T.);+#2696=LINE('',#2684,#58);+#2697=PLANE('',#2698);+#2698=AXIS2_PLACEMENT_3D('',#2686,#13,#28);+#2699=ADVANCED_FACE('',(#2700),#1857,.F.);+#2700=FACE_BOUND('',#2701,.F.);+#2701=EDGE_LOOP('',(#2702,#2708,#2709,#2715));+#2702=ORIENTED_EDGE('',*,*,#2703,.F.);+#2703=EDGE_CURVE('',#437,#2704,#2706,.T.);+#2704=VERTEX_POINT('',#2705);+#2705=CARTESIAN_POINT('',(3.05,-3.86,0.65));+#2706=LINE('',#2707,#754);+#2707=CARTESIAN_POINT('',(3.05,-3.86,0.477669411398));+#2708=ORIENTED_EDGE('',*,*,#436,.T.);+#2709=ORIENTED_EDGE('',*,*,#2710,.T.);+#2710=EDGE_CURVE('',#433,#2711,#2713,.T.);+#2711=VERTEX_POINT('',#2712);+#2712=CARTESIAN_POINT('',(3.05,-4.14,0.65));+#2713=LINE('',#2714,#754);+#2714=CARTESIAN_POINT('',(3.05,-4.14,0.477669411398));+#2715=ORIENTED_EDGE('',*,*,#2716,.F.);+#2716=EDGE_CURVE('',#2704,#2711,#679,.T.);+#2717=ADVANCED_FACE('',(#2718),#2736,.F.);+#2718=FACE_BOUND('',#2719,.F.);+#2719=EDGE_LOOP('',(#2720,#2726,#2727,#2733));+#2720=ORIENTED_EDGE('',*,*,#2721,.F.);+#2721=EDGE_CURVE('',#433,#2722,#2724,.T.);+#2722=VERTEX_POINT('',#2723);+#2723=CARTESIAN_POINT('',(3.25,-4.14,0.5));+#2724=LINE('',#2725,#27);+#2725=CARTESIAN_POINT('',(2.95,-4.14,0.5));+#2726=ORIENTED_EDGE('',*,*,#432,.T.);+#2727=ORIENTED_EDGE('',*,*,#2728,.T.);+#2728=EDGE_CURVE('',#429,#2729,#2731,.T.);+#2729=VERTEX_POINT('',#2730);+#2730=CARTESIAN_POINT('',(3.25,-4.36,0.5));+#2731=LINE('',#2732,#27);+#2732=CARTESIAN_POINT('',(2.95,-4.36,0.5));+#2733=ORIENTED_EDGE('',*,*,#2734,.F.);+#2734=EDGE_CURVE('',#2722,#2729,#2735,.T.);+#2735=LINE('',#2723,#58);+#2736=PLANE('',#2737);+#2737=AXIS2_PLACEMENT_3D('',#2725,#13,#28);+#2738=ADVANCED_FACE('',(#2739),#1857,.F.);+#2739=FACE_BOUND('',#2740,.F.);+#2740=EDGE_LOOP('',(#2741,#2747,#2748,#2754));+#2741=ORIENTED_EDGE('',*,*,#2742,.F.);+#2742=EDGE_CURVE('',#429,#2743,#2745,.T.);+#2743=VERTEX_POINT('',#2744);+#2744=CARTESIAN_POINT('',(3.05,-4.36,0.65));+#2745=LINE('',#2746,#754);+#2746=CARTESIAN_POINT('',(3.05,-4.36,0.477669411398));+#2747=ORIENTED_EDGE('',*,*,#428,.T.);+#2748=ORIENTED_EDGE('',*,*,#2749,.T.);+#2749=EDGE_CURVE('',#425,#2750,#2752,.T.);+#2750=VERTEX_POINT('',#2751);+#2751=CARTESIAN_POINT('',(3.05,-4.64,0.65));+#2752=LINE('',#2753,#754);+#2753=CARTESIAN_POINT('',(3.05,-4.64,0.477669411398));+#2754=ORIENTED_EDGE('',*,*,#2755,.F.);+#2755=EDGE_CURVE('',#2743,#2750,#679,.T.);+#2756=ADVANCED_FACE('',(#2757),#2775,.F.);+#2757=FACE_BOUND('',#2758,.F.);+#2758=EDGE_LOOP('',(#2759,#2765,#2766,#2772));+#2759=ORIENTED_EDGE('',*,*,#2760,.F.);+#2760=EDGE_CURVE('',#425,#2761,#2763,.T.);+#2761=VERTEX_POINT('',#2762);+#2762=CARTESIAN_POINT('',(3.25,-4.64,0.5));+#2763=LINE('',#2764,#27);+#2764=CARTESIAN_POINT('',(2.95,-4.64,0.5));+#2765=ORIENTED_EDGE('',*,*,#424,.T.);+#2766=ORIENTED_EDGE('',*,*,#2767,.T.);+#2767=EDGE_CURVE('',#421,#2768,#2770,.T.);+#2768=VERTEX_POINT('',#2769);+#2769=CARTESIAN_POINT('',(3.25,-4.86,0.5));+#2770=LINE('',#2771,#27);+#2771=CARTESIAN_POINT('',(2.95,-4.86,0.5));+#2772=ORIENTED_EDGE('',*,*,#2773,.F.);+#2773=EDGE_CURVE('',#2761,#2768,#2774,.T.);+#2774=LINE('',#2762,#58);+#2775=PLANE('',#2776);+#2776=AXIS2_PLACEMENT_3D('',#2764,#13,#28);+#2777=ADVANCED_FACE('',(#2778),#1857,.F.);+#2778=FACE_BOUND('',#2779,.F.);+#2779=EDGE_LOOP('',(#2780,#2786,#2787,#2793));+#2780=ORIENTED_EDGE('',*,*,#2781,.F.);+#2781=EDGE_CURVE('',#421,#2782,#2784,.T.);+#2782=VERTEX_POINT('',#2783);+#2783=CARTESIAN_POINT('',(3.05,-4.86,0.65));+#2784=LINE('',#2785,#754);+#2785=CARTESIAN_POINT('',(3.05,-4.86,0.477669411398));+#2786=ORIENTED_EDGE('',*,*,#420,.T.);+#2787=ORIENTED_EDGE('',*,*,#2788,.T.);+#2788=EDGE_CURVE('',#417,#2789,#2791,.T.);+#2789=VERTEX_POINT('',#2790);+#2790=CARTESIAN_POINT('',(3.05,-5.14,0.65));+#2791=LINE('',#2792,#754);+#2792=CARTESIAN_POINT('',(3.05,-5.14,0.477669411398));+#2793=ORIENTED_EDGE('',*,*,#2794,.F.);+#2794=EDGE_CURVE('',#2782,#2789,#679,.T.);+#2795=ADVANCED_FACE('',(#2796),#2814,.F.);+#2796=FACE_BOUND('',#2797,.F.);+#2797=EDGE_LOOP('',(#2798,#2804,#2805,#2811));+#2798=ORIENTED_EDGE('',*,*,#2799,.F.);+#2799=EDGE_CURVE('',#417,#2800,#2802,.T.);+#2800=VERTEX_POINT('',#2801);+#2801=CARTESIAN_POINT('',(3.25,-5.14,0.5));+#2802=LINE('',#2803,#27);+#2803=CARTESIAN_POINT('',(2.95,-5.14,0.5));+#2804=ORIENTED_EDGE('',*,*,#416,.T.);+#2805=ORIENTED_EDGE('',*,*,#2806,.T.);+#2806=EDGE_CURVE('',#413,#2807,#2809,.T.);+#2807=VERTEX_POINT('',#2808);+#2808=CARTESIAN_POINT('',(3.25,-5.36,0.5));+#2809=LINE('',#2810,#27);+#2810=CARTESIAN_POINT('',(2.95,-5.36,0.5));+#2811=ORIENTED_EDGE('',*,*,#2812,.F.);+#2812=EDGE_CURVE('',#2800,#2807,#2813,.T.);+#2813=LINE('',#2801,#58);+#2814=PLANE('',#2815);+#2815=AXIS2_PLACEMENT_3D('',#2803,#13,#28);+#2816=ADVANCED_FACE('',(#2817),#1857,.F.);+#2817=FACE_BOUND('',#2818,.F.);+#2818=EDGE_LOOP('',(#2819,#2825,#2826,#2832));+#2819=ORIENTED_EDGE('',*,*,#2820,.F.);+#2820=EDGE_CURVE('',#413,#2821,#2823,.T.);+#2821=VERTEX_POINT('',#2822);+#2822=CARTESIAN_POINT('',(3.05,-5.36,0.65));+#2823=LINE('',#2824,#754);+#2824=CARTESIAN_POINT('',(3.05,-5.36,0.477669411398));+#2825=ORIENTED_EDGE('',*,*,#412,.T.);+#2826=ORIENTED_EDGE('',*,*,#2827,.T.);+#2827=EDGE_CURVE('',#409,#2828,#2830,.T.);+#2828=VERTEX_POINT('',#2829);+#2829=CARTESIAN_POINT('',(3.05,-5.64,0.65));+#2830=LINE('',#2831,#754);+#2831=CARTESIAN_POINT('',(3.05,-5.64,0.477669411398));+#2832=ORIENTED_EDGE('',*,*,#2833,.F.);+#2833=EDGE_CURVE('',#2821,#2828,#679,.T.);+#2834=ADVANCED_FACE('',(#2835),#2853,.F.);+#2835=FACE_BOUND('',#2836,.F.);+#2836=EDGE_LOOP('',(#2837,#2843,#2844,#2850));+#2837=ORIENTED_EDGE('',*,*,#2838,.F.);+#2838=EDGE_CURVE('',#409,#2839,#2841,.T.);+#2839=VERTEX_POINT('',#2840);+#2840=CARTESIAN_POINT('',(3.25,-5.64,0.5));+#2841=LINE('',#2842,#27);+#2842=CARTESIAN_POINT('',(2.95,-5.64,0.5));+#2843=ORIENTED_EDGE('',*,*,#408,.T.);+#2844=ORIENTED_EDGE('',*,*,#2845,.T.);+#2845=EDGE_CURVE('',#405,#2846,#2848,.T.);+#2846=VERTEX_POINT('',#2847);+#2847=CARTESIAN_POINT('',(3.25,-5.86,0.5));+#2848=LINE('',#2849,#27);+#2849=CARTESIAN_POINT('',(2.95,-5.86,0.5));+#2850=ORIENTED_EDGE('',*,*,#2851,.F.);+#2851=EDGE_CURVE('',#2839,#2846,#2852,.T.);+#2852=LINE('',#2840,#58);+#2853=PLANE('',#2854);+#2854=AXIS2_PLACEMENT_3D('',#2842,#13,#28);+#2855=ADVANCED_FACE('',(#2856),#1857,.F.);+#2856=FACE_BOUND('',#2857,.F.);+#2857=EDGE_LOOP('',(#2858,#2864,#2865,#2871));+#2858=ORIENTED_EDGE('',*,*,#2859,.F.);+#2859=EDGE_CURVE('',#405,#2860,#2862,.T.);+#2860=VERTEX_POINT('',#2861);+#2861=CARTESIAN_POINT('',(3.05,-5.86,0.65));+#2862=LINE('',#2863,#754);+#2863=CARTESIAN_POINT('',(3.05,-5.86,0.477669411398));+#2864=ORIENTED_EDGE('',*,*,#404,.T.);+#2865=ORIENTED_EDGE('',*,*,#2866,.T.);+#2866=EDGE_CURVE('',#401,#2867,#2869,.T.);+#2867=VERTEX_POINT('',#2868);+#2868=CARTESIAN_POINT('',(3.05,-6.14,0.65));+#2869=LINE('',#2870,#754);+#2870=CARTESIAN_POINT('',(3.05,-6.14,0.477669411398));+#2871=ORIENTED_EDGE('',*,*,#2872,.F.);+#2872=EDGE_CURVE('',#2860,#2867,#679,.T.);+#2873=ADVANCED_FACE('',(#2874),#2892,.F.);+#2874=FACE_BOUND('',#2875,.F.);+#2875=EDGE_LOOP('',(#2876,#2882,#2883,#2889));+#2876=ORIENTED_EDGE('',*,*,#2877,.F.);+#2877=EDGE_CURVE('',#401,#2878,#2880,.T.);+#2878=VERTEX_POINT('',#2879);+#2879=CARTESIAN_POINT('',(3.25,-6.14,0.5));+#2880=LINE('',#2881,#27);+#2881=CARTESIAN_POINT('',(2.95,-6.14,0.5));+#2882=ORIENTED_EDGE('',*,*,#400,.T.);+#2883=ORIENTED_EDGE('',*,*,#2884,.T.);+#2884=EDGE_CURVE('',#397,#2885,#2887,.T.);+#2885=VERTEX_POINT('',#2886);+#2886=CARTESIAN_POINT('',(3.25,-6.36,0.5));+#2887=LINE('',#2888,#27);+#2888=CARTESIAN_POINT('',(2.95,-6.36,0.5));+#2889=ORIENTED_EDGE('',*,*,#2890,.F.);+#2890=EDGE_CURVE('',#2878,#2885,#2891,.T.);+#2891=LINE('',#2879,#58);+#2892=PLANE('',#2893);+#2893=AXIS2_PLACEMENT_3D('',#2881,#13,#28);+#2894=ADVANCED_FACE('',(#2895),#1857,.F.);+#2895=FACE_BOUND('',#2896,.F.);+#2896=EDGE_LOOP('',(#2897,#2903,#2904,#2910));+#2897=ORIENTED_EDGE('',*,*,#2898,.F.);+#2898=EDGE_CURVE('',#397,#2899,#2901,.T.);+#2899=VERTEX_POINT('',#2900);+#2900=CARTESIAN_POINT('',(3.05,-6.36,0.65));+#2901=LINE('',#2902,#754);+#2902=CARTESIAN_POINT('',(3.05,-6.36,0.477669411398));+#2903=ORIENTED_EDGE('',*,*,#396,.T.);+#2904=ORIENTED_EDGE('',*,*,#2905,.T.);+#2905=EDGE_CURVE('',#393,#2906,#2908,.T.);+#2906=VERTEX_POINT('',#2907);+#2907=CARTESIAN_POINT('',(3.05,-6.64,0.65));+#2908=LINE('',#2909,#754);+#2909=CARTESIAN_POINT('',(3.05,-6.64,0.477669411398));+#2910=ORIENTED_EDGE('',*,*,#2911,.F.);+#2911=EDGE_CURVE('',#2899,#2906,#679,.T.);+#2912=ADVANCED_FACE('',(#2913),#2931,.F.);+#2913=FACE_BOUND('',#2914,.F.);+#2914=EDGE_LOOP('',(#2915,#2921,#2922,#2928));+#2915=ORIENTED_EDGE('',*,*,#2916,.F.);+#2916=EDGE_CURVE('',#393,#2917,#2919,.T.);+#2917=VERTEX_POINT('',#2918);+#2918=CARTESIAN_POINT('',(3.25,-6.64,0.5));+#2919=LINE('',#2920,#27);+#2920=CARTESIAN_POINT('',(2.95,-6.64,0.5));+#2921=ORIENTED_EDGE('',*,*,#392,.T.);+#2922=ORIENTED_EDGE('',*,*,#2923,.T.);+#2923=EDGE_CURVE('',#388,#2924,#2926,.T.);+#2924=VERTEX_POINT('',#2925);+#2925=CARTESIAN_POINT('',(3.25,-6.86,0.5));+#2926=LINE('',#2927,#27);+#2927=CARTESIAN_POINT('',(2.95,-6.86,0.5));+#2928=ORIENTED_EDGE('',*,*,#2929,.F.);+#2929=EDGE_CURVE('',#2917,#2924,#2930,.T.);+#2930=LINE('',#2918,#58);+#2931=PLANE('',#2932);+#2932=AXIS2_PLACEMENT_3D('',#2920,#13,#28);+#2933=ADVANCED_FACE('',(#2934),#1857,.F.);+#2934=FACE_BOUND('',#2935,.F.);+#2935=EDGE_LOOP('',(#2936,#2942,#2943,#2948));+#2936=ORIENTED_EDGE('',*,*,#2937,.F.);+#2937=EDGE_CURVE('',#388,#2938,#2940,.T.);+#2938=VERTEX_POINT('',#2939);+#2939=CARTESIAN_POINT('',(3.05,-6.86,0.65));+#2940=LINE('',#2941,#754);+#2941=CARTESIAN_POINT('',(3.05,-6.86,0.477669411398));+#2942=ORIENTED_EDGE('',*,*,#387,.T.);+#2943=ORIENTED_EDGE('',*,*,#2944,.T.);+#2944=EDGE_CURVE('',#383,#2945,#2947,.T.);+#2945=VERTEX_POINT('',#2946);+#2946=CARTESIAN_POINT('',(3.05,-6.91,0.65));+#2947=B_SPLINE_CURVE_WITH_KNOTS('',1,(#384,#2946),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2948=ORIENTED_EDGE('',*,*,#2949,.F.);+#2949=EDGE_CURVE('',#2938,#2945,#679,.T.);+#2950=ADVANCED_FACE('',(#2951),#2963,.F.);+#2951=FACE_BOUND('',#2952,.F.);+#2952=EDGE_LOOP('',(#2953,#2954,#2955,#2960));+#2953=ORIENTED_EDGE('',*,*,#620,.T.);+#2954=ORIENTED_EDGE('',*,*,#744,.T.);+#2955=ORIENTED_EDGE('',*,*,#2956,.F.);+#2956=EDGE_CURVE('',#2957,#745,#2959,.T.);+#2957=VERTEX_POINT('',#2958);+#2958=CARTESIAN_POINT('',(-2.96,-7.,0.65));+#2959=LINE('',#2958,#79);+#2960=ORIENTED_EDGE('',*,*,#2961,.F.);+#2961=EDGE_CURVE('',#621,#2957,#2962,.T.);+#2962=B_SPLINE_CURVE_WITH_KNOTS('',1,(#622,#2958),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2963=PLANE('',#2964);+#2964=AXIS2_PLACEMENT_3D('',#2958,#92,#80);+#2965=ADVANCED_FACE('',(#2966),#2978,.F.);+#2966=FACE_BOUND('',#2967,.F.);+#2967=EDGE_LOOP('',(#2968,#2969,#2974,#2977));+#2968=ORIENTED_EDGE('',*,*,#637,.T.);+#2969=ORIENTED_EDGE('',*,*,#2970,.T.);+#2970=EDGE_CURVE('',#633,#2971,#2973,.T.);+#2971=VERTEX_POINT('',#2972);+#2972=CARTESIAN_POINT('',(2.96,-7.,0.65));+#2973=B_SPLINE_CURVE_WITH_KNOTS('',1,(#634,#2972),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2974=ORIENTED_EDGE('',*,*,#2975,.F.);+#2975=EDGE_CURVE('',#2945,#2971,#2976,.T.);+#2976=LINE('',#2946,#65);+#2977=ORIENTED_EDGE('',*,*,#2944,.F.);+#2978=PLANE('',#2979);+#2979=AXIS2_PLACEMENT_3D('',#2946,#80,#66);+#2980=ADVANCED_FACE('',(#2981),#2989,.F.);+#2981=FACE_BOUND('',#2982,.F.);+#2982=EDGE_LOOP('',(#2983,#2984,#2985,#2988));+#2983=ORIENTED_EDGE('',*,*,#646,.T.);+#2984=ORIENTED_EDGE('',*,*,#2961,.T.);+#2985=ORIENTED_EDGE('',*,*,#2986,.F.);+#2986=EDGE_CURVE('',#2971,#2957,#2987,.T.);+#2987=LINE('',#2972,#72);+#2988=ORIENTED_EDGE('',*,*,#2970,.F.);+#2989=PLANE('',#2990);+#2990=AXIS2_PLACEMENT_3D('',#2972,#87,#73);+#2991=ADVANCED_FACE('',(#2992),#3012,.F.);+#2992=FACE_BOUND('',#2993,.F.);+#2993=EDGE_LOOP('',(#2994,#2999,#3003,#3005,#3006,#3010));+#2994=ORIENTED_EDGE('',*,*,#2995,.F.);+#2995=EDGE_CURVE('',#2996,#1810,#2998,.T.);+#2996=VERTEX_POINT('',#2997);+#2997=CARTESIAN_POINT('',(-3.25,6.64,0.65));+#2998=LINE('',#2997,#718);+#2999=ORIENTED_EDGE('',*,*,#3000,.T.);+#3000=EDGE_CURVE('',#2996,#3001,#3002,.T.);+#3001=VERTEX_POINT('',#717);+#3002=LINE('',#2997,#780);+#3003=ORIENTED_EDGE('',*,*,#3004,.T.);+#3004=EDGE_CURVE('',#3001,#714,#716,.T.);+#3005=ORIENTED_EDGE('',*,*,#713,.T.);+#3006=ORIENTED_EDGE('',*,*,#3007,.F.);+#3007=EDGE_CURVE('',#3008,#708,#710,.T.);+#3008=VERTEX_POINT('',#3009);+#3009=CARTESIAN_POINT('',(-3.,6.64,0.65));+#3010=ORIENTED_EDGE('',*,*,#3011,.F.);+#3011=EDGE_CURVE('',#1810,#3008,#2998,.T.);+#3012=PLANE('',#3013);+#3013=AXIS2_PLACEMENT_3D('',#2997,#3014,#719);+#3014=DIRECTION('',(0.,0.,-1.));+#3015=ADVANCED_FACE('',(#3016),#3252,.F.);+#3016=FACE_BOUND('',#3017,.F.);+#3017=EDGE_LOOP('',(#3018,#3023,#3027,#3031,#3035,#3039,#3043,#3047,#3051,#3055,#3059,#3063,#3067,#3071,#3075,#3079,#3083,#3087,#3091,#3095,#3099,#3103,#3107,#3111,#3115,#3119,#3123,#3127,#3131,#3135,#3139,#3143,#3147,#3151,#3155,#3159,#3163,#3167,#3171,#3175,#3179,#3183,#3187,#3191,#3195,#3199,#3203,#3207,#3211,#3215,#3219,#3223,#3227,#3231,#3235,#3237,#3238,#3239,#3244,#3249));+#3018=ORIENTED_EDGE('',*,*,#3019,.T.);+#3019=EDGE_CURVE('',#3020,#3021,#710,.T.);+#3020=VERTEX_POINT('',#711);+#3021=VERTEX_POINT('',#3022);+#3022=CARTESIAN_POINT('',(-3.,-6.86,0.65));+#3023=ORIENTED_EDGE('',*,*,#3024,.T.);+#3024=EDGE_CURVE('',#3021,#3025,#710,.T.);+#3025=VERTEX_POINT('',#3026);+#3026=CARTESIAN_POINT('',(-3.,-6.64,0.65));+#3027=ORIENTED_EDGE('',*,*,#3028,.T.);+#3028=EDGE_CURVE('',#3025,#3029,#710,.T.);+#3029=VERTEX_POINT('',#3030);+#3030=CARTESIAN_POINT('',(-3.,-6.36,0.65));+#3031=ORIENTED_EDGE('',*,*,#3032,.T.);+#3032=EDGE_CURVE('',#3029,#3033,#710,.T.);+#3033=VERTEX_POINT('',#3034);+#3034=CARTESIAN_POINT('',(-3.,-6.14,0.65));+#3035=ORIENTED_EDGE('',*,*,#3036,.T.);+#3036=EDGE_CURVE('',#3033,#3037,#710,.T.);+#3037=VERTEX_POINT('',#3038);+#3038=CARTESIAN_POINT('',(-3.,-5.86,0.65));+#3039=ORIENTED_EDGE('',*,*,#3040,.T.);+#3040=EDGE_CURVE('',#3037,#3041,#710,.T.);+#3041=VERTEX_POINT('',#3042);+#3042=CARTESIAN_POINT('',(-3.,-5.64,0.65));+#3043=ORIENTED_EDGE('',*,*,#3044,.T.);+#3044=EDGE_CURVE('',#3041,#3045,#710,.T.);+#3045=VERTEX_POINT('',#3046);+#3046=CARTESIAN_POINT('',(-3.,-5.36,0.65));+#3047=ORIENTED_EDGE('',*,*,#3048,.T.);+#3048=EDGE_CURVE('',#3045,#3049,#710,.T.);+#3049=VERTEX_POINT('',#3050);+#3050=CARTESIAN_POINT('',(-3.,-5.14,0.65));+#3051=ORIENTED_EDGE('',*,*,#3052,.T.);+#3052=EDGE_CURVE('',#3049,#3053,#710,.T.);+#3053=VERTEX_POINT('',#3054);+#3054=CARTESIAN_POINT('',(-3.,-4.86,0.65));+#3055=ORIENTED_EDGE('',*,*,#3056,.T.);+#3056=EDGE_CURVE('',#3053,#3057,#710,.T.);+#3057=VERTEX_POINT('',#3058);+#3058=CARTESIAN_POINT('',(-3.,-4.64,0.65));+#3059=ORIENTED_EDGE('',*,*,#3060,.T.);+#3060=EDGE_CURVE('',#3057,#3061,#710,.T.);+#3061=VERTEX_POINT('',#3062);+#3062=CARTESIAN_POINT('',(-3.,-4.36,0.65));+#3063=ORIENTED_EDGE('',*,*,#3064,.T.);+#3064=EDGE_CURVE('',#3061,#3065,#710,.T.);+#3065=VERTEX_POINT('',#3066);+#3066=CARTESIAN_POINT('',(-3.,-4.14,0.65));+#3067=ORIENTED_EDGE('',*,*,#3068,.T.);+#3068=EDGE_CURVE('',#3065,#3069,#710,.T.);+#3069=VERTEX_POINT('',#3070);+#3070=CARTESIAN_POINT('',(-3.,-3.86,0.65));+#3071=ORIENTED_EDGE('',*,*,#3072,.T.);+#3072=EDGE_CURVE('',#3069,#3073,#710,.T.);+#3073=VERTEX_POINT('',#3074);+#3074=CARTESIAN_POINT('',(-3.,-3.64,0.65));+#3075=ORIENTED_EDGE('',*,*,#3076,.T.);+#3076=EDGE_CURVE('',#3073,#3077,#710,.T.);+#3077=VERTEX_POINT('',#3078);+#3078=CARTESIAN_POINT('',(-3.,-3.36,0.65));+#3079=ORIENTED_EDGE('',*,*,#3080,.T.);+#3080=EDGE_CURVE('',#3077,#3081,#710,.T.);+#3081=VERTEX_POINT('',#3082);+#3082=CARTESIAN_POINT('',(-3.,-3.14,0.65));+#3083=ORIENTED_EDGE('',*,*,#3084,.T.);+#3084=EDGE_CURVE('',#3081,#3085,#710,.T.);+#3085=VERTEX_POINT('',#3086);+#3086=CARTESIAN_POINT('',(-3.,-2.86,0.65));+#3087=ORIENTED_EDGE('',*,*,#3088,.T.);+#3088=EDGE_CURVE('',#3085,#3089,#710,.T.);+#3089=VERTEX_POINT('',#3090);+#3090=CARTESIAN_POINT('',(-3.,-2.64,0.65));+#3091=ORIENTED_EDGE('',*,*,#3092,.T.);+#3092=EDGE_CURVE('',#3089,#3093,#710,.T.);+#3093=VERTEX_POINT('',#3094);+#3094=CARTESIAN_POINT('',(-3.,-2.36,0.65));+#3095=ORIENTED_EDGE('',*,*,#3096,.T.);+#3096=EDGE_CURVE('',#3093,#3097,#710,.T.);+#3097=VERTEX_POINT('',#3098);+#3098=CARTESIAN_POINT('',(-3.,-2.14,0.65));+#3099=ORIENTED_EDGE('',*,*,#3100,.T.);+#3100=EDGE_CURVE('',#3097,#3101,#710,.T.);+#3101=VERTEX_POINT('',#3102);+#3102=CARTESIAN_POINT('',(-3.,-1.86,0.65));+#3103=ORIENTED_EDGE('',*,*,#3104,.T.);+#3104=EDGE_CURVE('',#3101,#3105,#710,.T.);+#3105=VERTEX_POINT('',#3106);+#3106=CARTESIAN_POINT('',(-3.,-1.64,0.65));+#3107=ORIENTED_EDGE('',*,*,#3108,.T.);+#3108=EDGE_CURVE('',#3105,#3109,#710,.T.);+#3109=VERTEX_POINT('',#3110);+#3110=CARTESIAN_POINT('',(-3.,-1.36,0.65));+#3111=ORIENTED_EDGE('',*,*,#3112,.T.);+#3112=EDGE_CURVE('',#3109,#3113,#710,.T.);+#3113=VERTEX_POINT('',#3114);+#3114=CARTESIAN_POINT('',(-3.,-1.14,0.65));+#3115=ORIENTED_EDGE('',*,*,#3116,.T.);+#3116=EDGE_CURVE('',#3113,#3117,#710,.T.);+#3117=VERTEX_POINT('',#3118);+#3118=CARTESIAN_POINT('',(-3.,-0.86,0.65));+#3119=ORIENTED_EDGE('',*,*,#3120,.T.);+#3120=EDGE_CURVE('',#3117,#3121,#710,.T.);+#3121=VERTEX_POINT('',#3122);+#3122=CARTESIAN_POINT('',(-3.,-0.64,0.65));+#3123=ORIENTED_EDGE('',*,*,#3124,.T.);+#3124=EDGE_CURVE('',#3121,#3125,#710,.T.);+#3125=VERTEX_POINT('',#3126);+#3126=CARTESIAN_POINT('',(-3.,-0.36,0.65));+#3127=ORIENTED_EDGE('',*,*,#3128,.T.);+#3128=EDGE_CURVE('',#3125,#3129,#710,.T.);+#3129=VERTEX_POINT('',#3130);+#3130=CARTESIAN_POINT('',(-3.,-0.14,0.65));+#3131=ORIENTED_EDGE('',*,*,#3132,.T.);+#3132=EDGE_CURVE('',#3129,#3133,#710,.T.);+#3133=VERTEX_POINT('',#3134);+#3134=CARTESIAN_POINT('',(-3.,0.14,0.65));+#3135=ORIENTED_EDGE('',*,*,#3136,.T.);+#3136=EDGE_CURVE('',#3133,#3137,#710,.T.);+#3137=VERTEX_POINT('',#3138);+#3138=CARTESIAN_POINT('',(-3.,0.36,0.65));+#3139=ORIENTED_EDGE('',*,*,#3140,.T.);+#3140=EDGE_CURVE('',#3137,#3141,#710,.T.);+#3141=VERTEX_POINT('',#3142);+#3142=CARTESIAN_POINT('',(-3.,0.64,0.65));+#3143=ORIENTED_EDGE('',*,*,#3144,.T.);+#3144=EDGE_CURVE('',#3141,#3145,#710,.T.);+#3145=VERTEX_POINT('',#3146);+#3146=CARTESIAN_POINT('',(-3.,0.86,0.65));+#3147=ORIENTED_EDGE('',*,*,#3148,.T.);+#3148=EDGE_CURVE('',#3145,#3149,#710,.T.);+#3149=VERTEX_POINT('',#3150);+#3150=CARTESIAN_POINT('',(-3.,1.14,0.65));+#3151=ORIENTED_EDGE('',*,*,#3152,.T.);+#3152=EDGE_CURVE('',#3149,#3153,#710,.T.);+#3153=VERTEX_POINT('',#3154);+#3154=CARTESIAN_POINT('',(-3.,1.36,0.65));+#3155=ORIENTED_EDGE('',*,*,#3156,.T.);+#3156=EDGE_CURVE('',#3153,#3157,#710,.T.);+#3157=VERTEX_POINT('',#3158);+#3158=CARTESIAN_POINT('',(-3.,1.64,0.65));+#3159=ORIENTED_EDGE('',*,*,#3160,.T.);+#3160=EDGE_CURVE('',#3157,#3161,#710,.T.);+#3161=VERTEX_POINT('',#3162);+#3162=CARTESIAN_POINT('',(-3.,1.86,0.65));+#3163=ORIENTED_EDGE('',*,*,#3164,.T.);+#3164=EDGE_CURVE('',#3161,#3165,#710,.T.);+#3165=VERTEX_POINT('',#3166);+#3166=CARTESIAN_POINT('',(-3.,2.14,0.65));+#3167=ORIENTED_EDGE('',*,*,#3168,.T.);+#3168=EDGE_CURVE('',#3165,#3169,#710,.T.);+#3169=VERTEX_POINT('',#3170);+#3170=CARTESIAN_POINT('',(-3.,2.36,0.65));+#3171=ORIENTED_EDGE('',*,*,#3172,.T.);+#3172=EDGE_CURVE('',#3169,#3173,#710,.T.);+#3173=VERTEX_POINT('',#3174);+#3174=CARTESIAN_POINT('',(-3.,2.64,0.65));+#3175=ORIENTED_EDGE('',*,*,#3176,.T.);+#3176=EDGE_CURVE('',#3173,#3177,#710,.T.);+#3177=VERTEX_POINT('',#3178);+#3178=CARTESIAN_POINT('',(-3.,2.86,0.65));+#3179=ORIENTED_EDGE('',*,*,#3180,.T.);+#3180=EDGE_CURVE('',#3177,#3181,#710,.T.);+#3181=VERTEX_POINT('',#3182);+#3182=CARTESIAN_POINT('',(-3.,3.14,0.65));+#3183=ORIENTED_EDGE('',*,*,#3184,.T.);+#3184=EDGE_CURVE('',#3181,#3185,#710,.T.);+#3185=VERTEX_POINT('',#3186);+#3186=CARTESIAN_POINT('',(-3.,3.36,0.65));+#3187=ORIENTED_EDGE('',*,*,#3188,.T.);+#3188=EDGE_CURVE('',#3185,#3189,#710,.T.);+#3189=VERTEX_POINT('',#3190);+#3190=CARTESIAN_POINT('',(-3.,3.64,0.65));+#3191=ORIENTED_EDGE('',*,*,#3192,.T.);+#3192=EDGE_CURVE('',#3189,#3193,#710,.T.);+#3193=VERTEX_POINT('',#3194);+#3194=CARTESIAN_POINT('',(-3.,3.86,0.65));+#3195=ORIENTED_EDGE('',*,*,#3196,.T.);+#3196=EDGE_CURVE('',#3193,#3197,#710,.T.);+#3197=VERTEX_POINT('',#3198);+#3198=CARTESIAN_POINT('',(-3.,4.14,0.65));+#3199=ORIENTED_EDGE('',*,*,#3200,.T.);+#3200=EDGE_CURVE('',#3197,#3201,#710,.T.);+#3201=VERTEX_POINT('',#3202);+#3202=CARTESIAN_POINT('',(-3.,4.36,0.65));+#3203=ORIENTED_EDGE('',*,*,#3204,.T.);+#3204=EDGE_CURVE('',#3201,#3205,#710,.T.);+#3205=VERTEX_POINT('',#3206);+#3206=CARTESIAN_POINT('',(-3.,4.64,0.65));+#3207=ORIENTED_EDGE('',*,*,#3208,.T.);+#3208=EDGE_CURVE('',#3205,#3209,#710,.T.);+#3209=VERTEX_POINT('',#3210);+#3210=CARTESIAN_POINT('',(-3.,4.86,0.65));+#3211=ORIENTED_EDGE('',*,*,#3212,.T.);+#3212=EDGE_CURVE('',#3209,#3213,#710,.T.);+#3213=VERTEX_POINT('',#3214);+#3214=CARTESIAN_POINT('',(-3.,5.14,0.65));+#3215=ORIENTED_EDGE('',*,*,#3216,.T.);+#3216=EDGE_CURVE('',#3213,#3217,#710,.T.);+#3217=VERTEX_POINT('',#3218);+#3218=CARTESIAN_POINT('',(-3.,5.36,0.65));+#3219=ORIENTED_EDGE('',*,*,#3220,.T.);+#3220=EDGE_CURVE('',#3217,#3221,#710,.T.);+#3221=VERTEX_POINT('',#3222);+#3222=CARTESIAN_POINT('',(-3.,5.64,0.65));+#3223=ORIENTED_EDGE('',*,*,#3224,.T.);+#3224=EDGE_CURVE('',#3221,#3225,#710,.T.);+#3225=VERTEX_POINT('',#3226);+#3226=CARTESIAN_POINT('',(-3.,5.86,0.65));+#3227=ORIENTED_EDGE('',*,*,#3228,.T.);+#3228=EDGE_CURVE('',#3225,#3229,#710,.T.);+#3229=VERTEX_POINT('',#3230);+#3230=CARTESIAN_POINT('',(-3.,6.14,0.65));+#3231=ORIENTED_EDGE('',*,*,#3232,.T.);+#3232=EDGE_CURVE('',#3229,#3233,#710,.T.);+#3233=VERTEX_POINT('',#3234);+#3234=CARTESIAN_POINT('',(-3.,6.36,0.65));+#3235=ORIENTED_EDGE('',*,*,#3236,.T.);+#3236=EDGE_CURVE('',#3233,#3008,#710,.T.);+#3237=ORIENTED_EDGE('',*,*,#3007,.T.);+#3238=ORIENTED_EDGE('',*,*,#707,.T.);+#3239=ORIENTED_EDGE('',*,*,#3240,.T.);+#3240=EDGE_CURVE('',#703,#3241,#3243,.T.);+#3241=VERTEX_POINT('',#3242);+#3242=CARTESIAN_POINT('',(-2.914977375332,6.842488687666,1.05));+#3243=B_SPLINE_CURVE_WITH_KNOTS('',1,(#704,#3242),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3244=ORIENTED_EDGE('',*,*,#3245,.F.);+#3245=EDGE_CURVE('',#3246,#3241,#3248,.T.);+#3246=VERTEX_POINT('',#3247);+#3247=CARTESIAN_POINT('',(-2.914977375332,-6.842488687666,1.05));+#3248=LINE('',#3247,#86);+#3249=ORIENTED_EDGE('',*,*,#3250,.F.);+#3250=EDGE_CURVE('',#3020,#3246,#3251,.T.);+#3251=B_SPLINE_CURVE_WITH_KNOTS('',1,(#711,#3247),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3252=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#711,#3247),(#704,#3242)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,13.77),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3253=ADVANCED_FACE('',(#3254),#3266,.F.);+#3254=FACE_BOUND('',#3255,.F.);+#3255=EDGE_LOOP('',(#3256,#3257,#3262,#3265));+#3256=ORIENTED_EDGE('',*,*,#702,.T.);+#3257=ORIENTED_EDGE('',*,*,#3258,.T.);+#3258=EDGE_CURVE('',#698,#3259,#3261,.T.);+#3259=VERTEX_POINT('',#3260);+#3260=CARTESIAN_POINT('',(-2.892488687666,6.864977375332,1.05));+#3261=B_SPLINE_CURVE_WITH_KNOTS('',1,(#699,#3260),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3262=ORIENTED_EDGE('',*,*,#3263,.F.);+#3263=EDGE_CURVE('',#3241,#3259,#3264,.T.);+#3264=LINE('',#3242,#91);+#3265=ORIENTED_EDGE('',*,*,#3240,.F.);+#3266=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#704,#3242),(#699,#3260)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,9.192388155425E-02),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3267=ADVANCED_FACE('',(#3268),#3280,.F.);+#3268=FACE_BOUND('',#3269,.F.);+#3269=EDGE_LOOP('',(#3270,#3271,#3276,#3279));+#3270=ORIENTED_EDGE('',*,*,#697,.T.);+#3271=ORIENTED_EDGE('',*,*,#3272,.T.);+#3272=EDGE_CURVE('',#693,#3273,#3275,.T.);+#3273=VERTEX_POINT('',#3274);+#3274=CARTESIAN_POINT('',(2.892488687666,6.864977375332,1.05));+#3275=B_SPLINE_CURVE_WITH_KNOTS('',1,(#694,#3274),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3276=ORIENTED_EDGE('',*,*,#3277,.F.);+#3277=EDGE_CURVE('',#3259,#3273,#3278,.T.);+#3278=LINE('',#3260,#27);+#3279=ORIENTED_EDGE('',*,*,#3258,.F.);+#3280=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#699,#3260),(#694,#3274)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,5.87),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3281=ADVANCED_FACE('',(#3282),#3294,.F.);+#3282=FACE_BOUND('',#3283,.F.);+#3283=EDGE_LOOP('',(#3284,#3285,#3290,#3293));+#3284=ORIENTED_EDGE('',*,*,#692,.T.);+#3285=ORIENTED_EDGE('',*,*,#3286,.T.);+#3286=EDGE_CURVE('',#688,#3287,#3289,.T.);+#3287=VERTEX_POINT('',#3288);+#3288=CARTESIAN_POINT('',(2.914977375332,6.842488687666,1.05));+#3289=B_SPLINE_CURVE_WITH_KNOTS('',1,(#689,#3288),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3290=ORIENTED_EDGE('',*,*,#3291,.F.);+#3291=EDGE_CURVE('',#3273,#3287,#3292,.T.);+#3292=LINE('',#3274,#51);+#3293=ORIENTED_EDGE('',*,*,#3272,.F.);+#3294=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#694,#3274),(#689,#3288)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,9.192388155425E-02),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3295=ADVANCED_FACE('',(#3296),#3532,.F.);+#3296=FACE_BOUND('',#3297,.F.);+#3297=EDGE_LOOP('',(#3298,#3299,#3303,#3307,#3311,#3315,#3319,#3323,#3327,#3331,#3335,#3339,#3343,#3347,#3351,#3355,#3359,#3363,#3367,#3371,#3375,#3379,#3383,#3387,#3391,#3395,#3399,#3403,#3407,#3411,#3415,#3419,#3423,#3427,#3431,#3435,#3439,#3443,#3447,#3451,#3455,#3459,#3463,#3467,#3471,#3475,#3479,#3483,#3487,#3491,#3495,#3499,#3503,#3507,#3511,#3515,#3519,#3523,#3528,#3531));+#3298=ORIENTED_EDGE('',*,*,#687,.T.);+#3299=ORIENTED_EDGE('',*,*,#3300,.T.);+#3300=EDGE_CURVE('',#682,#3301,#690,.T.);+#3301=VERTEX_POINT('',#3302);+#3302=CARTESIAN_POINT('',(3.,6.64,0.65));+#3303=ORIENTED_EDGE('',*,*,#3304,.T.);+#3304=EDGE_CURVE('',#3301,#3305,#690,.T.);+#3305=VERTEX_POINT('',#3306);+#3306=CARTESIAN_POINT('',(3.,6.36,0.65));+#3307=ORIENTED_EDGE('',*,*,#3308,.T.);+#3308=EDGE_CURVE('',#3305,#3309,#690,.T.);+#3309=VERTEX_POINT('',#3310);+#3310=CARTESIAN_POINT('',(3.,6.14,0.65));+#3311=ORIENTED_EDGE('',*,*,#3312,.T.);+#3312=EDGE_CURVE('',#3309,#3313,#690,.T.);+#3313=VERTEX_POINT('',#3314);+#3314=CARTESIAN_POINT('',(3.,5.86,0.65));+#3315=ORIENTED_EDGE('',*,*,#3316,.T.);+#3316=EDGE_CURVE('',#3313,#3317,#690,.T.);+#3317=VERTEX_POINT('',#3318);+#3318=CARTESIAN_POINT('',(3.,5.64,0.65));+#3319=ORIENTED_EDGE('',*,*,#3320,.T.);+#3320=EDGE_CURVE('',#3317,#3321,#690,.T.);+#3321=VERTEX_POINT('',#3322);+#3322=CARTESIAN_POINT('',(3.,5.36,0.65));+#3323=ORIENTED_EDGE('',*,*,#3324,.T.);+#3324=EDGE_CURVE('',#3321,#3325,#690,.T.);+#3325=VERTEX_POINT('',#3326);+#3326=CARTESIAN_POINT('',(3.,5.14,0.65));+#3327=ORIENTED_EDGE('',*,*,#3328,.T.);+#3328=EDGE_CURVE('',#3325,#3329,#690,.T.);+#3329=VERTEX_POINT('',#3330);+#3330=CARTESIAN_POINT('',(3.,4.86,0.65));+#3331=ORIENTED_EDGE('',*,*,#3332,.T.);+#3332=EDGE_CURVE('',#3329,#3333,#690,.T.);+#3333=VERTEX_POINT('',#3334);+#3334=CARTESIAN_POINT('',(3.,4.64,0.65));+#3335=ORIENTED_EDGE('',*,*,#3336,.T.);+#3336=EDGE_CURVE('',#3333,#3337,#690,.T.);+#3337=VERTEX_POINT('',#3338);+#3338=CARTESIAN_POINT('',(3.,4.36,0.65));+#3339=ORIENTED_EDGE('',*,*,#3340,.T.);+#3340=EDGE_CURVE('',#3337,#3341,#690,.T.);+#3341=VERTEX_POINT('',#3342);+#3342=CARTESIAN_POINT('',(3.,4.14,0.65));+#3343=ORIENTED_EDGE('',*,*,#3344,.T.);+#3344=EDGE_CURVE('',#3341,#3345,#690,.T.);+#3345=VERTEX_POINT('',#3346);+#3346=CARTESIAN_POINT('',(3.,3.86,0.65));+#3347=ORIENTED_EDGE('',*,*,#3348,.T.);+#3348=EDGE_CURVE('',#3345,#3349,#690,.T.);+#3349=VERTEX_POINT('',#3350);+#3350=CARTESIAN_POINT('',(3.,3.64,0.65));+#3351=ORIENTED_EDGE('',*,*,#3352,.T.);+#3352=EDGE_CURVE('',#3349,#3353,#690,.T.);+#3353=VERTEX_POINT('',#3354);+#3354=CARTESIAN_POINT('',(3.,3.36,0.65));+#3355=ORIENTED_EDGE('',*,*,#3356,.T.);+#3356=EDGE_CURVE('',#3353,#3357,#690,.T.);+#3357=VERTEX_POINT('',#3358);+#3358=CARTESIAN_POINT('',(3.,3.14,0.65));+#3359=ORIENTED_EDGE('',*,*,#3360,.T.);+#3360=EDGE_CURVE('',#3357,#3361,#690,.T.);+#3361=VERTEX_POINT('',#3362);+#3362=CARTESIAN_POINT('',(3.,2.86,0.65));+#3363=ORIENTED_EDGE('',*,*,#3364,.T.);+#3364=EDGE_CURVE('',#3361,#3365,#690,.T.);+#3365=VERTEX_POINT('',#3366);+#3366=CARTESIAN_POINT('',(3.,2.64,0.65));+#3367=ORIENTED_EDGE('',*,*,#3368,.T.);+#3368=EDGE_CURVE('',#3365,#3369,#690,.T.);+#3369=VERTEX_POINT('',#3370);+#3370=CARTESIAN_POINT('',(3.,2.36,0.65));+#3371=ORIENTED_EDGE('',*,*,#3372,.T.);+#3372=EDGE_CURVE('',#3369,#3373,#690,.T.);+#3373=VERTEX_POINT('',#3374);+#3374=CARTESIAN_POINT('',(3.,2.14,0.65));+#3375=ORIENTED_EDGE('',*,*,#3376,.T.);+#3376=EDGE_CURVE('',#3373,#3377,#690,.T.);+#3377=VERTEX_POINT('',#3378);+#3378=CARTESIAN_POINT('',(3.,1.86,0.65));+#3379=ORIENTED_EDGE('',*,*,#3380,.T.);+#3380=EDGE_CURVE('',#3377,#3381,#690,.T.);+#3381=VERTEX_POINT('',#3382);+#3382=CARTESIAN_POINT('',(3.,1.64,0.65));+#3383=ORIENTED_EDGE('',*,*,#3384,.T.);+#3384=EDGE_CURVE('',#3381,#3385,#690,.T.);+#3385=VERTEX_POINT('',#3386);+#3386=CARTESIAN_POINT('',(3.,1.36,0.65));+#3387=ORIENTED_EDGE('',*,*,#3388,.T.);+#3388=EDGE_CURVE('',#3385,#3389,#690,.T.);+#3389=VERTEX_POINT('',#3390);+#3390=CARTESIAN_POINT('',(3.,1.14,0.65));+#3391=ORIENTED_EDGE('',*,*,#3392,.T.);+#3392=EDGE_CURVE('',#3389,#3393,#690,.T.);+#3393=VERTEX_POINT('',#3394);+#3394=CARTESIAN_POINT('',(3.,0.86,0.65));+#3395=ORIENTED_EDGE('',*,*,#3396,.T.);+#3396=EDGE_CURVE('',#3393,#3397,#690,.T.);+#3397=VERTEX_POINT('',#3398);+#3398=CARTESIAN_POINT('',(3.,0.64,0.65));+#3399=ORIENTED_EDGE('',*,*,#3400,.T.);+#3400=EDGE_CURVE('',#3397,#3401,#690,.T.);+#3401=VERTEX_POINT('',#3402);+#3402=CARTESIAN_POINT('',(3.,0.36,0.65));+#3403=ORIENTED_EDGE('',*,*,#3404,.T.);+#3404=EDGE_CURVE('',#3401,#3405,#690,.T.);+#3405=VERTEX_POINT('',#3406);+#3406=CARTESIAN_POINT('',(3.,0.14,0.65));+#3407=ORIENTED_EDGE('',*,*,#3408,.T.);+#3408=EDGE_CURVE('',#3405,#3409,#690,.T.);+#3409=VERTEX_POINT('',#3410);+#3410=CARTESIAN_POINT('',(3.,-0.14,0.65));+#3411=ORIENTED_EDGE('',*,*,#3412,.T.);+#3412=EDGE_CURVE('',#3409,#3413,#690,.T.);+#3413=VERTEX_POINT('',#3414);+#3414=CARTESIAN_POINT('',(3.,-0.36,0.65));+#3415=ORIENTED_EDGE('',*,*,#3416,.T.);+#3416=EDGE_CURVE('',#3413,#3417,#690,.T.);+#3417=VERTEX_POINT('',#3418);+#3418=CARTESIAN_POINT('',(3.,-0.64,0.65));+#3419=ORIENTED_EDGE('',*,*,#3420,.T.);+#3420=EDGE_CURVE('',#3417,#3421,#690,.T.);+#3421=VERTEX_POINT('',#3422);+#3422=CARTESIAN_POINT('',(3.,-0.86,0.65));+#3423=ORIENTED_EDGE('',*,*,#3424,.T.);+#3424=EDGE_CURVE('',#3421,#3425,#690,.T.);+#3425=VERTEX_POINT('',#3426);+#3426=CARTESIAN_POINT('',(3.,-1.14,0.65));+#3427=ORIENTED_EDGE('',*,*,#3428,.T.);+#3428=EDGE_CURVE('',#3425,#3429,#690,.T.);+#3429=VERTEX_POINT('',#3430);+#3430=CARTESIAN_POINT('',(3.,-1.36,0.65));+#3431=ORIENTED_EDGE('',*,*,#3432,.T.);+#3432=EDGE_CURVE('',#3429,#3433,#690,.T.);+#3433=VERTEX_POINT('',#3434);+#3434=CARTESIAN_POINT('',(3.,-1.64,0.65));+#3435=ORIENTED_EDGE('',*,*,#3436,.T.);+#3436=EDGE_CURVE('',#3433,#3437,#690,.T.);+#3437=VERTEX_POINT('',#3438);+#3438=CARTESIAN_POINT('',(3.,-1.86,0.65));+#3439=ORIENTED_EDGE('',*,*,#3440,.T.);+#3440=EDGE_CURVE('',#3437,#3441,#690,.T.);+#3441=VERTEX_POINT('',#3442);+#3442=CARTESIAN_POINT('',(3.,-2.14,0.65));+#3443=ORIENTED_EDGE('',*,*,#3444,.T.);+#3444=EDGE_CURVE('',#3441,#3445,#690,.T.);+#3445=VERTEX_POINT('',#3446);+#3446=CARTESIAN_POINT('',(3.,-2.36,0.65));+#3447=ORIENTED_EDGE('',*,*,#3448,.T.);+#3448=EDGE_CURVE('',#3445,#3449,#690,.T.);+#3449=VERTEX_POINT('',#3450);+#3450=CARTESIAN_POINT('',(3.,-2.64,0.65));+#3451=ORIENTED_EDGE('',*,*,#3452,.T.);+#3452=EDGE_CURVE('',#3449,#3453,#690,.T.);+#3453=VERTEX_POINT('',#3454);+#3454=CARTESIAN_POINT('',(3.,-2.86,0.65));+#3455=ORIENTED_EDGE('',*,*,#3456,.T.);+#3456=EDGE_CURVE('',#3453,#3457,#690,.T.);+#3457=VERTEX_POINT('',#3458);+#3458=CARTESIAN_POINT('',(3.,-3.14,0.65));+#3459=ORIENTED_EDGE('',*,*,#3460,.T.);+#3460=EDGE_CURVE('',#3457,#3461,#690,.T.);+#3461=VERTEX_POINT('',#3462);+#3462=CARTESIAN_POINT('',(3.,-3.36,0.65));+#3463=ORIENTED_EDGE('',*,*,#3464,.T.);+#3464=EDGE_CURVE('',#3461,#3465,#690,.T.);+#3465=VERTEX_POINT('',#3466);+#3466=CARTESIAN_POINT('',(3.,-3.64,0.65));+#3467=ORIENTED_EDGE('',*,*,#3468,.T.);+#3468=EDGE_CURVE('',#3465,#3469,#690,.T.);+#3469=VERTEX_POINT('',#3470);+#3470=CARTESIAN_POINT('',(3.,-3.86,0.65));+#3471=ORIENTED_EDGE('',*,*,#3472,.T.);+#3472=EDGE_CURVE('',#3469,#3473,#690,.T.);+#3473=VERTEX_POINT('',#3474);+#3474=CARTESIAN_POINT('',(3.,-4.14,0.65));+#3475=ORIENTED_EDGE('',*,*,#3476,.T.);+#3476=EDGE_CURVE('',#3473,#3477,#690,.T.);+#3477=VERTEX_POINT('',#3478);+#3478=CARTESIAN_POINT('',(3.,-4.36,0.65));+#3479=ORIENTED_EDGE('',*,*,#3480,.T.);+#3480=EDGE_CURVE('',#3477,#3481,#690,.T.);+#3481=VERTEX_POINT('',#3482);+#3482=CARTESIAN_POINT('',(3.,-4.64,0.65));+#3483=ORIENTED_EDGE('',*,*,#3484,.T.);+#3484=EDGE_CURVE('',#3481,#3485,#690,.T.);+#3485=VERTEX_POINT('',#3486);+#3486=CARTESIAN_POINT('',(3.,-4.86,0.65));+#3487=ORIENTED_EDGE('',*,*,#3488,.T.);+#3488=EDGE_CURVE('',#3485,#3489,#690,.T.);+#3489=VERTEX_POINT('',#3490);+#3490=CARTESIAN_POINT('',(3.,-5.14,0.65));+#3491=ORIENTED_EDGE('',*,*,#3492,.T.);+#3492=EDGE_CURVE('',#3489,#3493,#690,.T.);+#3493=VERTEX_POINT('',#3494);+#3494=CARTESIAN_POINT('',(3.,-5.36,0.65));+#3495=ORIENTED_EDGE('',*,*,#3496,.T.);+#3496=EDGE_CURVE('',#3493,#3497,#690,.T.);+#3497=VERTEX_POINT('',#3498);+#3498=CARTESIAN_POINT('',(3.,-5.64,0.65));+#3499=ORIENTED_EDGE('',*,*,#3500,.T.);+#3500=EDGE_CURVE('',#3497,#3501,#690,.T.);+#3501=VERTEX_POINT('',#3502);+#3502=CARTESIAN_POINT('',(3.,-5.86,0.65));+#3503=ORIENTED_EDGE('',*,*,#3504,.T.);+#3504=EDGE_CURVE('',#3501,#3505,#690,.T.);+#3505=VERTEX_POINT('',#3506);+#3506=CARTESIAN_POINT('',(3.,-6.14,0.65));+#3507=ORIENTED_EDGE('',*,*,#3508,.T.);+#3508=EDGE_CURVE('',#3505,#3509,#690,.T.);+#3509=VERTEX_POINT('',#3510);+#3510=CARTESIAN_POINT('',(3.,-6.36,0.65));+#3511=ORIENTED_EDGE('',*,*,#3512,.T.);+#3512=EDGE_CURVE('',#3509,#3513,#690,.T.);+#3513=VERTEX_POINT('',#3514);+#3514=CARTESIAN_POINT('',(3.,-6.64,0.65));+#3515=ORIENTED_EDGE('',*,*,#3516,.T.);+#3516=EDGE_CURVE('',#3513,#3517,#690,.T.);+#3517=VERTEX_POINT('',#3518);+#3518=CARTESIAN_POINT('',(3.,-6.86,0.65));+#3519=ORIENTED_EDGE('',*,*,#3520,.T.);+#3520=EDGE_CURVE('',#3517,#3521,#690,.T.);+#3521=VERTEX_POINT('',#3522);+#3522=CARTESIAN_POINT('',(3.,-6.885,0.65));+#3523=ORIENTED_EDGE('',*,*,#3524,.T.);+#3524=EDGE_CURVE('',#3521,#3525,#3527,.T.);+#3525=VERTEX_POINT('',#3526);+#3526=CARTESIAN_POINT('',(2.914977375332,-6.842488687666,1.05));+#3527=B_SPLINE_CURVE_WITH_KNOTS('',1,(#3522,#3526),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3528=ORIENTED_EDGE('',*,*,#3529,.F.);+#3529=EDGE_CURVE('',#3287,#3525,#3530,.T.);+#3530=LINE('',#3288,#58);+#3531=ORIENTED_EDGE('',*,*,#3286,.F.);+#3532=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#689,#3288),(#3522,#3526)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,13.77),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3533=ADVANCED_FACE('',(#3534),#3551,.F.);+#3534=FACE_BOUND('',#3535,.F.);+#3535=EDGE_LOOP('',(#3536,#3539,#3544,#3547,#3549,#3550));+#3536=ORIENTED_EDGE('',*,*,#3537,.F.);+#3537=EDGE_CURVE('',#3538,#677,#684,.T.);+#3538=VERTEX_POINT('',#685);+#3539=ORIENTED_EDGE('',*,*,#3540,.T.);+#3540=EDGE_CURVE('',#3538,#3541,#3543,.T.);+#3541=VERTEX_POINT('',#3542);+#3542=CARTESIAN_POINT('',(3.25,6.64,0.65));+#3543=LINE('',#685,#58);+#3544=ORIENTED_EDGE('',*,*,#3545,.T.);+#3545=EDGE_CURVE('',#3541,#1885,#3546,.T.);+#3546=LINE('',#3542,#72);+#3547=ORIENTED_EDGE('',*,*,#3548,.T.);+#3548=EDGE_CURVE('',#1885,#3301,#3546,.T.);+#3549=ORIENTED_EDGE('',*,*,#3300,.F.);+#3550=ORIENTED_EDGE('',*,*,#681,.F.);+#3551=PLANE('',#3552);+#3552=AXIS2_PLACEMENT_3D('',#685,#3014,#73);+#3553=ADVANCED_FACE('',(#3554),#724,.F.);+#3554=FACE_BOUND('',#3555,.F.);+#3555=EDGE_LOOP('',(#3556,#3557,#3561,#3562,#3567,#3572,#3575,#3576,#3580,#3581,#3582,#3583));+#3556=ORIENTED_EDGE('',*,*,#756,.T.);+#3557=ORIENTED_EDGE('',*,*,#3558,.T.);+#3558=EDGE_CURVE('',#750,#3021,#3559,.T.);+#3559=LINE('',#3560,#718);+#3560=CARTESIAN_POINT('',(-3.25,-6.86,0.65));+#3561=ORIENTED_EDGE('',*,*,#3019,.F.);+#3562=ORIENTED_EDGE('',*,*,#3563,.F.);+#3563=EDGE_CURVE('',#3564,#3020,#3566,.T.);+#3564=VERTEX_POINT('',#3565);+#3565=CARTESIAN_POINT('',(-2.935,-6.95,0.65));+#3566=LINE('',#3565,#79);+#3567=ORIENTED_EDGE('',*,*,#3568,.F.);+#3568=EDGE_CURVE('',#3569,#3564,#3571,.T.);+#3569=VERTEX_POINT('',#3570);+#3570=CARTESIAN_POINT('',(2.935,-6.95,0.65));+#3571=LINE('',#3570,#72);+#3572=ORIENTED_EDGE('',*,*,#3573,.F.);+#3573=EDGE_CURVE('',#3521,#3569,#3574,.T.);+#3574=LINE('',#3522,#65);+#3575=ORIENTED_EDGE('',*,*,#3520,.F.);+#3576=ORIENTED_EDGE('',*,*,#3577,.F.);+#3577=EDGE_CURVE('',#2938,#3517,#3578,.T.);+#3578=LINE('',#3579,#72);+#3579=CARTESIAN_POINT('',(3.25,-6.86,0.65));+#3580=ORIENTED_EDGE('',*,*,#2949,.T.);+#3581=ORIENTED_EDGE('',*,*,#2975,.T.);+#3582=ORIENTED_EDGE('',*,*,#2986,.T.);+#3583=ORIENTED_EDGE('',*,*,#2956,.T.);+#3584=ADVANCED_FACE('',(#3585),#3653,.F.);+#3585=FACE_BOUND('',#3586,.F.);+#3586=EDGE_LOOP('',(#3587,#3588,#3589,#3598,#3605,#3614,#3619,#3624,#3629,#3637,#3644,#3651));+#3587=ORIENTED_EDGE('',*,*,#749,.F.);+#3588=ORIENTED_EDGE('',*,*,#763,.T.);+#3589=ORIENTED_EDGE('',*,*,#3590,.T.);+#3590=EDGE_CURVE('',#764,#3591,#3593,.T.);+#3591=VERTEX_POINT('',#3592);+#3592=CARTESIAN_POINT('',(-3.348480775301,-6.86,0.417364817767));+#3593=CIRCLE('',#3594,0.1);+#3594=AXIS2_PLACEMENT_3D('',#3595,#3596,#3597);+#3595=CARTESIAN_POINT('',(-3.25,-6.86,0.4));+#3596=DIRECTION('',(-1.144237745222E-17,-1.,4.379057701015E-47));+#3597=DIRECTION('',(-4.440892098501E-15,5.081436361562E-32,1.));+#3598=ORIENTED_EDGE('',*,*,#3599,.T.);+#3599=EDGE_CURVE('',#3591,#3600,#3602,.T.);+#3600=VERTEX_POINT('',#3601);+#3601=CARTESIAN_POINT('',(-3.380247108853,-6.86,0.206587955583));+#3602=LINE('',#3592,#3603);+#3603=VECTOR('',#3604,1.);+#3604=DIRECTION('',(-0.14902773993,1.705231651125E-18,-0.988833015595));+#3605=ORIENTED_EDGE('',*,*,#3606,.T.);+#3606=EDGE_CURVE('',#3600,#3607,#3609,.T.);+#3607=VERTEX_POINT('',#3608);+#3608=CARTESIAN_POINT('',(-3.626449047106,-6.86,5.551115123126E-17));+#3609=CIRCLE('',#3610,0.25);+#3610=AXIS2_PLACEMENT_3D('',#3611,#3612,#3613);+#3611=CARTESIAN_POINT('',(-3.626449047106,-6.86,0.25));+#3612=DIRECTION('',(1.144237745222E-17,1.,-1.155557966632E-33));+#3613=DIRECTION('',(0.984807753012,-1.126854202784E-17,-0.173648177667));+#3614=ORIENTED_EDGE('',*,*,#3615,.T.);+#3615=EDGE_CURVE('',#3607,#3616,#3618,.T.);+#3616=VERTEX_POINT('',#3617);+#3617=CARTESIAN_POINT('',(-4.05,-6.86,5.551115123126E-17));+#3618=LINE('',#3608,#768);+#3619=ORIENTED_EDGE('',*,*,#3620,.T.);+#3620=EDGE_CURVE('',#3616,#3621,#3623,.T.);+#3621=VERTEX_POINT('',#3622);+#3622=CARTESIAN_POINT('',(-4.05,-6.86,0.15));+#3623=LINE('',#3617,#754);+#3624=ORIENTED_EDGE('',*,*,#3625,.T.);+#3625=EDGE_CURVE('',#3621,#3626,#3628,.T.);+#3626=VERTEX_POINT('',#3627);+#3627=CARTESIAN_POINT('',(-3.626449047106,-6.86,0.15));+#3628=LINE('',#3622,#718);+#3629=ORIENTED_EDGE('',*,*,#3630,.T.);+#3630=EDGE_CURVE('',#3626,#3631,#3633,.T.);+#3631=VERTEX_POINT('',#3632);+#3632=CARTESIAN_POINT('',(-3.527968271805,-6.86,0.232635182233));+#3633=CIRCLE('',#3634,0.1);+#3634=AXIS2_PLACEMENT_3D('',#3611,#3635,#3636);+#3635=DIRECTION('',(-1.144237745222E-17,-1.,1.094764425254E-47));+#3636=DIRECTION('',(4.440892098501E-15,-5.081436361562E-32,-1.));+#3637=ORIENTED_EDGE('',*,*,#3638,.T.);+#3638=EDGE_CURVE('',#3631,#3639,#3641,.T.);+#3639=VERTEX_POINT('',#3640);+#3640=CARTESIAN_POINT('',(-3.496201938253,-6.86,0.443412044417));+#3641=LINE('',#3632,#3642);+#3642=VECTOR('',#3643,1.);+#3643=DIRECTION('',(0.14902773993,-1.705231651125E-18,0.988833015595));+#3644=ORIENTED_EDGE('',*,*,#3645,.T.);+#3645=EDGE_CURVE('',#3639,#3646,#3647,.T.);+#3646=VERTEX_POINT('',#3560);+#3647=CIRCLE('',#3648,0.25);+#3648=AXIS2_PLACEMENT_3D('',#3595,#3649,#3650);+#3649=DIRECTION('',(1.144237745222E-17,1.,-3.851859888774E-34));+#3650=DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667));+#3651=ORIENTED_EDGE('',*,*,#3652,.T.);+#3652=EDGE_CURVE('',#3646,#750,#3559,.T.);+#3653=PLANE('',#3654);+#3654=AXIS2_PLACEMENT_3D('',#3655,#781,#13);+#3655=CARTESIAN_POINT('',(-3.487377466565,-6.86,0.305338822795));+#3656=ADVANCED_FACE('',(#3657),#3671,.F.);+#3657=FACE_BOUND('',#3658,.F.);+#3658=EDGE_LOOP('',(#3659,#3660,#3667,#3670));+#3659=ORIENTED_EDGE('',*,*,#778,.T.);+#3660=ORIENTED_EDGE('',*,*,#3661,.T.);+#3661=EDGE_CURVE('',#773,#3662,#3664,.T.);+#3662=VERTEX_POINT('',#3663);+#3663=CARTESIAN_POINT('',(-3.348480775301,-6.64,0.417364817767));+#3664=CIRCLE('',#3665,0.1);+#3665=AXIS2_PLACEMENT_3D('',#3666,#3596,#3597);+#3666=CARTESIAN_POINT('',(-3.25,-6.64,0.4));+#3667=ORIENTED_EDGE('',*,*,#3668,.F.);+#3668=EDGE_CURVE('',#3591,#3662,#3669,.T.);+#3669=LINE('',#3592,#780);+#3670=ORIENTED_EDGE('',*,*,#3590,.F.);+#3671=CYLINDRICAL_SURFACE('',#3672,0.1);+#3672=AXIS2_PLACEMENT_3D('',#3595,#3673,#3597);+#3673=DIRECTION('',(-1.144237745222E-17,-1.,0.));+#3674=ADVANCED_FACE('',(#3675),#3724,.T.);+#3675=FACE_BOUND('',#3676,.T.);+#3676=EDGE_LOOP('',(#787,#771,#3660,#3677,#3682,#3689,#3694,#3699,#3704,#3710,#3715,#3721));+#3677=ORIENTED_EDGE('',*,*,#3678,.T.);+#3678=EDGE_CURVE('',#3662,#3679,#3681,.T.);+#3679=VERTEX_POINT('',#3680);+#3680=CARTESIAN_POINT('',(-3.380247108853,-6.64,0.206587955583));+#3681=LINE('',#3663,#3603);+#3682=ORIENTED_EDGE('',*,*,#3683,.T.);+#3683=EDGE_CURVE('',#3679,#3684,#3686,.T.);+#3684=VERTEX_POINT('',#3685);+#3685=CARTESIAN_POINT('',(-3.626449047106,-6.64,5.551115123126E-17));+#3686=CIRCLE('',#3687,0.25);+#3687=AXIS2_PLACEMENT_3D('',#3688,#3612,#3613);+#3688=CARTESIAN_POINT('',(-3.626449047106,-6.64,0.25));+#3689=ORIENTED_EDGE('',*,*,#3690,.T.);+#3690=EDGE_CURVE('',#3684,#3691,#3693,.T.);+#3691=VERTEX_POINT('',#3692);+#3692=CARTESIAN_POINT('',(-4.05,-6.64,5.551115123126E-17));+#3693=LINE('',#3685,#768);+#3694=ORIENTED_EDGE('',*,*,#3695,.T.);+#3695=EDGE_CURVE('',#3691,#3696,#3698,.T.);+#3696=VERTEX_POINT('',#3697);+#3697=CARTESIAN_POINT('',(-4.05,-6.64,0.15));+#3698=LINE('',#3692,#754);+#3699=ORIENTED_EDGE('',*,*,#3700,.T.);+#3700=EDGE_CURVE('',#3696,#3701,#3703,.T.);+#3701=VERTEX_POINT('',#3702);+#3702=CARTESIAN_POINT('',(-3.626449047106,-6.64,0.15));+#3703=LINE('',#3697,#718);+#3704=ORIENTED_EDGE('',*,*,#3705,.T.);+#3705=EDGE_CURVE('',#3701,#3706,#3708,.T.);+#3706=VERTEX_POINT('',#3707);+#3707=CARTESIAN_POINT('',(-3.527968271805,-6.64,0.232635182233));+#3708=CIRCLE('',#3709,0.1);+#3709=AXIS2_PLACEMENT_3D('',#3688,#3635,#3636);+#3710=ORIENTED_EDGE('',*,*,#3711,.T.);+#3711=EDGE_CURVE('',#3706,#3712,#3714,.T.);+#3712=VERTEX_POINT('',#3713);+#3713=CARTESIAN_POINT('',(-3.496201938253,-6.64,0.443412044417));+#3714=LINE('',#3707,#3642);+#3715=ORIENTED_EDGE('',*,*,#3716,.T.);+#3716=EDGE_CURVE('',#3712,#3717,#3719,.T.);+#3717=VERTEX_POINT('',#3718);+#3718=CARTESIAN_POINT('',(-3.25,-6.64,0.65));+#3719=CIRCLE('',#3720,0.25);+#3720=AXIS2_PLACEMENT_3D('',#3666,#3649,#3650);+#3721=ORIENTED_EDGE('',*,*,#3722,.T.);+#3722=EDGE_CURVE('',#3717,#789,#3723,.T.);+#3723=LINE('',#3718,#718);+#3724=PLANE('',#3725);+#3725=AXIS2_PLACEMENT_3D('',#3726,#781,#13);+#3726=CARTESIAN_POINT('',(-3.487377466565,-6.64,0.305338822795));+#3727=ADVANCED_FACE('',(#3728),#724,.F.);+#3728=FACE_BOUND('',#3729,.F.);+#3729=EDGE_LOOP('',(#3730,#3731,#3735,#3736));+#3730=ORIENTED_EDGE('',*,*,#801,.T.);+#3731=ORIENTED_EDGE('',*,*,#3732,.T.);+#3732=EDGE_CURVE('',#796,#3029,#3733,.T.);+#3733=LINE('',#3734,#718);+#3734=CARTESIAN_POINT('',(-3.25,-6.36,0.65));+#3735=ORIENTED_EDGE('',*,*,#3028,.F.);+#3736=ORIENTED_EDGE('',*,*,#3737,.F.);+#3737=EDGE_CURVE('',#789,#3025,#3723,.T.);+#3738=ADVANCED_FACE('',(#3739),#3795,.F.);+#3739=FACE_BOUND('',#3740,.F.);+#3740=EDGE_LOOP('',(#3741,#3742,#3743,#3750,#3755,#3762,#3767,#3772,#3777,#3783,#3788,#3793));+#3741=ORIENTED_EDGE('',*,*,#795,.F.);+#3742=ORIENTED_EDGE('',*,*,#806,.T.);+#3743=ORIENTED_EDGE('',*,*,#3744,.T.);+#3744=EDGE_CURVE('',#807,#3745,#3747,.T.);+#3745=VERTEX_POINT('',#3746);+#3746=CARTESIAN_POINT('',(-3.348480775301,-6.36,0.417364817767));+#3747=CIRCLE('',#3748,0.1);+#3748=AXIS2_PLACEMENT_3D('',#3749,#3596,#3597);+#3749=CARTESIAN_POINT('',(-3.25,-6.36,0.4));+#3750=ORIENTED_EDGE('',*,*,#3751,.T.);+#3751=EDGE_CURVE('',#3745,#3752,#3754,.T.);+#3752=VERTEX_POINT('',#3753);+#3753=CARTESIAN_POINT('',(-3.380247108853,-6.36,0.206587955583));+#3754=LINE('',#3746,#3603);+#3755=ORIENTED_EDGE('',*,*,#3756,.T.);+#3756=EDGE_CURVE('',#3752,#3757,#3759,.T.);+#3757=VERTEX_POINT('',#3758);+#3758=CARTESIAN_POINT('',(-3.626449047106,-6.36,5.551115123126E-17));+#3759=CIRCLE('',#3760,0.25);+#3760=AXIS2_PLACEMENT_3D('',#3761,#3612,#3613);+#3761=CARTESIAN_POINT('',(-3.626449047106,-6.36,0.25));+#3762=ORIENTED_EDGE('',*,*,#3763,.T.);+#3763=EDGE_CURVE('',#3757,#3764,#3766,.T.);+#3764=VERTEX_POINT('',#3765);+#3765=CARTESIAN_POINT('',(-4.05,-6.36,5.551115123126E-17));+#3766=LINE('',#3758,#768);+#3767=ORIENTED_EDGE('',*,*,#3768,.T.);+#3768=EDGE_CURVE('',#3764,#3769,#3771,.T.);+#3769=VERTEX_POINT('',#3770);+#3770=CARTESIAN_POINT('',(-4.05,-6.36,0.15));+#3771=LINE('',#3765,#754);+#3772=ORIENTED_EDGE('',*,*,#3773,.T.);+#3773=EDGE_CURVE('',#3769,#3774,#3776,.T.);+#3774=VERTEX_POINT('',#3775);+#3775=CARTESIAN_POINT('',(-3.626449047106,-6.36,0.15));+#3776=LINE('',#3770,#718);+#3777=ORIENTED_EDGE('',*,*,#3778,.T.);+#3778=EDGE_CURVE('',#3774,#3779,#3781,.T.);+#3779=VERTEX_POINT('',#3780);+#3780=CARTESIAN_POINT('',(-3.527968271805,-6.36,0.232635182233));+#3781=CIRCLE('',#3782,0.1);+#3782=AXIS2_PLACEMENT_3D('',#3761,#3635,#3636);+#3783=ORIENTED_EDGE('',*,*,#3784,.T.);+#3784=EDGE_CURVE('',#3779,#3785,#3787,.T.);+#3785=VERTEX_POINT('',#3786);+#3786=CARTESIAN_POINT('',(-3.496201938253,-6.36,0.443412044417));+#3787=LINE('',#3780,#3642);+#3788=ORIENTED_EDGE('',*,*,#3789,.T.);+#3789=EDGE_CURVE('',#3785,#3790,#3791,.T.);+#3790=VERTEX_POINT('',#3734);+#3791=CIRCLE('',#3792,0.25);+#3792=AXIS2_PLACEMENT_3D('',#3749,#3649,#3650);+#3793=ORIENTED_EDGE('',*,*,#3794,.T.);+#3794=EDGE_CURVE('',#3790,#796,#3733,.T.);+#3795=PLANE('',#3796);+#3796=AXIS2_PLACEMENT_3D('',#3797,#781,#13);+#3797=CARTESIAN_POINT('',(-3.487377466565,-6.36,0.305338822795));+#3798=ADVANCED_FACE('',(#3799),#3813,.F.);+#3799=FACE_BOUND('',#3800,.F.);+#3800=EDGE_LOOP('',(#3801,#3802,#3809,#3812));+#3801=ORIENTED_EDGE('',*,*,#819,.T.);+#3802=ORIENTED_EDGE('',*,*,#3803,.T.);+#3803=EDGE_CURVE('',#814,#3804,#3806,.T.);+#3804=VERTEX_POINT('',#3805);+#3805=CARTESIAN_POINT('',(-3.348480775301,-6.14,0.417364817767));+#3806=CIRCLE('',#3807,0.1);+#3807=AXIS2_PLACEMENT_3D('',#3808,#3596,#3597);+#3808=CARTESIAN_POINT('',(-3.25,-6.14,0.4));+#3809=ORIENTED_EDGE('',*,*,#3810,.F.);+#3810=EDGE_CURVE('',#3745,#3804,#3811,.T.);+#3811=LINE('',#3746,#780);+#3812=ORIENTED_EDGE('',*,*,#3744,.F.);+#3813=CYLINDRICAL_SURFACE('',#3814,0.1);+#3814=AXIS2_PLACEMENT_3D('',#3749,#3673,#3597);+#3815=ADVANCED_FACE('',(#3816),#3865,.T.);+#3816=FACE_BOUND('',#3817,.T.);+#3817=EDGE_LOOP('',(#826,#812,#3802,#3818,#3823,#3830,#3835,#3840,#3845,#3851,#3856,#3862));+#3818=ORIENTED_EDGE('',*,*,#3819,.T.);+#3819=EDGE_CURVE('',#3804,#3820,#3822,.T.);+#3820=VERTEX_POINT('',#3821);+#3821=CARTESIAN_POINT('',(-3.380247108853,-6.14,0.206587955583));+#3822=LINE('',#3805,#3603);+#3823=ORIENTED_EDGE('',*,*,#3824,.T.);+#3824=EDGE_CURVE('',#3820,#3825,#3827,.T.);+#3825=VERTEX_POINT('',#3826);+#3826=CARTESIAN_POINT('',(-3.626449047106,-6.14,5.551115123126E-17));+#3827=CIRCLE('',#3828,0.25);+#3828=AXIS2_PLACEMENT_3D('',#3829,#3612,#3613);+#3829=CARTESIAN_POINT('',(-3.626449047106,-6.14,0.25));+#3830=ORIENTED_EDGE('',*,*,#3831,.T.);+#3831=EDGE_CURVE('',#3825,#3832,#3834,.T.);+#3832=VERTEX_POINT('',#3833);+#3833=CARTESIAN_POINT('',(-4.05,-6.14,5.551115123126E-17));+#3834=LINE('',#3826,#768);+#3835=ORIENTED_EDGE('',*,*,#3836,.T.);+#3836=EDGE_CURVE('',#3832,#3837,#3839,.T.);+#3837=VERTEX_POINT('',#3838);+#3838=CARTESIAN_POINT('',(-4.05,-6.14,0.15));+#3839=LINE('',#3833,#754);+#3840=ORIENTED_EDGE('',*,*,#3841,.T.);+#3841=EDGE_CURVE('',#3837,#3842,#3844,.T.);+#3842=VERTEX_POINT('',#3843);+#3843=CARTESIAN_POINT('',(-3.626449047106,-6.14,0.15));+#3844=LINE('',#3838,#718);+#3845=ORIENTED_EDGE('',*,*,#3846,.T.);+#3846=EDGE_CURVE('',#3842,#3847,#3849,.T.);+#3847=VERTEX_POINT('',#3848);+#3848=CARTESIAN_POINT('',(-3.527968271805,-6.14,0.232635182233));+#3849=CIRCLE('',#3850,0.1);+#3850=AXIS2_PLACEMENT_3D('',#3829,#3635,#3636);+#3851=ORIENTED_EDGE('',*,*,#3852,.T.);+#3852=EDGE_CURVE('',#3847,#3853,#3855,.T.);+#3853=VERTEX_POINT('',#3854);+#3854=CARTESIAN_POINT('',(-3.496201938253,-6.14,0.443412044417));+#3855=LINE('',#3848,#3642);+#3856=ORIENTED_EDGE('',*,*,#3857,.T.);+#3857=EDGE_CURVE('',#3853,#3858,#3860,.T.);+#3858=VERTEX_POINT('',#3859);+#3859=CARTESIAN_POINT('',(-3.25,-6.14,0.65));+#3860=CIRCLE('',#3861,0.25);+#3861=AXIS2_PLACEMENT_3D('',#3808,#3649,#3650);+#3862=ORIENTED_EDGE('',*,*,#3863,.T.);+#3863=EDGE_CURVE('',#3858,#828,#3864,.T.);+#3864=LINE('',#3859,#718);+#3865=PLANE('',#3866);+#3866=AXIS2_PLACEMENT_3D('',#3867,#781,#13);+#3867=CARTESIAN_POINT('',(-3.487377466565,-6.14,0.305338822795));+#3868=ADVANCED_FACE('',(#3869),#724,.F.);+#3869=FACE_BOUND('',#3870,.F.);+#3870=EDGE_LOOP('',(#3871,#3872,#3876,#3877));+#3871=ORIENTED_EDGE('',*,*,#840,.T.);+#3872=ORIENTED_EDGE('',*,*,#3873,.T.);+#3873=EDGE_CURVE('',#835,#3037,#3874,.T.);+#3874=LINE('',#3875,#718);+#3875=CARTESIAN_POINT('',(-3.25,-5.86,0.65));+#3876=ORIENTED_EDGE('',*,*,#3036,.F.);+#3877=ORIENTED_EDGE('',*,*,#3878,.F.);+#3878=EDGE_CURVE('',#828,#3033,#3864,.T.);+#3879=ADVANCED_FACE('',(#3880),#3936,.F.);+#3880=FACE_BOUND('',#3881,.F.);+#3881=EDGE_LOOP('',(#3882,#3883,#3884,#3891,#3896,#3903,#3908,#3913,#3918,#3924,#3929,#3934));+#3882=ORIENTED_EDGE('',*,*,#834,.F.);+#3883=ORIENTED_EDGE('',*,*,#845,.T.);+#3884=ORIENTED_EDGE('',*,*,#3885,.T.);+#3885=EDGE_CURVE('',#846,#3886,#3888,.T.);+#3886=VERTEX_POINT('',#3887);+#3887=CARTESIAN_POINT('',(-3.348480775301,-5.86,0.417364817767));+#3888=CIRCLE('',#3889,0.1);+#3889=AXIS2_PLACEMENT_3D('',#3890,#3596,#3597);+#3890=CARTESIAN_POINT('',(-3.25,-5.86,0.4));+#3891=ORIENTED_EDGE('',*,*,#3892,.T.);+#3892=EDGE_CURVE('',#3886,#3893,#3895,.T.);+#3893=VERTEX_POINT('',#3894);+#3894=CARTESIAN_POINT('',(-3.380247108853,-5.86,0.206587955583));+#3895=LINE('',#3887,#3603);+#3896=ORIENTED_EDGE('',*,*,#3897,.T.);+#3897=EDGE_CURVE('',#3893,#3898,#3900,.T.);+#3898=VERTEX_POINT('',#3899);+#3899=CARTESIAN_POINT('',(-3.626449047106,-5.86,5.551115123126E-17));+#3900=CIRCLE('',#3901,0.25);+#3901=AXIS2_PLACEMENT_3D('',#3902,#3612,#3613);+#3902=CARTESIAN_POINT('',(-3.626449047106,-5.86,0.25));+#3903=ORIENTED_EDGE('',*,*,#3904,.T.);+#3904=EDGE_CURVE('',#3898,#3905,#3907,.T.);+#3905=VERTEX_POINT('',#3906);+#3906=CARTESIAN_POINT('',(-4.05,-5.86,5.551115123126E-17));+#3907=LINE('',#3899,#768);+#3908=ORIENTED_EDGE('',*,*,#3909,.T.);+#3909=EDGE_CURVE('',#3905,#3910,#3912,.T.);+#3910=VERTEX_POINT('',#3911);+#3911=CARTESIAN_POINT('',(-4.05,-5.86,0.15));+#3912=LINE('',#3906,#754);+#3913=ORIENTED_EDGE('',*,*,#3914,.T.);+#3914=EDGE_CURVE('',#3910,#3915,#3917,.T.);+#3915=VERTEX_POINT('',#3916);+#3916=CARTESIAN_POINT('',(-3.626449047106,-5.86,0.15));+#3917=LINE('',#3911,#718);+#3918=ORIENTED_EDGE('',*,*,#3919,.T.);+#3919=EDGE_CURVE('',#3915,#3920,#3922,.T.);+#3920=VERTEX_POINT('',#3921);+#3921=CARTESIAN_POINT('',(-3.527968271805,-5.86,0.232635182233));+#3922=CIRCLE('',#3923,0.1);+#3923=AXIS2_PLACEMENT_3D('',#3902,#3635,#3636);+#3924=ORIENTED_EDGE('',*,*,#3925,.T.);+#3925=EDGE_CURVE('',#3920,#3926,#3928,.T.);+#3926=VERTEX_POINT('',#3927);+#3927=CARTESIAN_POINT('',(-3.496201938253,-5.86,0.443412044417));+#3928=LINE('',#3921,#3642);+#3929=ORIENTED_EDGE('',*,*,#3930,.T.);+#3930=EDGE_CURVE('',#3926,#3931,#3932,.T.);+#3931=VERTEX_POINT('',#3875);+#3932=CIRCLE('',#3933,0.25);+#3933=AXIS2_PLACEMENT_3D('',#3890,#3649,#3650);+#3934=ORIENTED_EDGE('',*,*,#3935,.T.);+#3935=EDGE_CURVE('',#3931,#835,#3874,.T.);+#3936=PLANE('',#3937);+#3937=AXIS2_PLACEMENT_3D('',#3938,#781,#13);+#3938=CARTESIAN_POINT('',(-3.487377466565,-5.86,0.305338822795));+#3939=ADVANCED_FACE('',(#3940),#3954,.F.);+#3940=FACE_BOUND('',#3941,.F.);+#3941=EDGE_LOOP('',(#3942,#3943,#3950,#3953));+#3942=ORIENTED_EDGE('',*,*,#858,.T.);+#3943=ORIENTED_EDGE('',*,*,#3944,.T.);+#3944=EDGE_CURVE('',#853,#3945,#3947,.T.);+#3945=VERTEX_POINT('',#3946);+#3946=CARTESIAN_POINT('',(-3.348480775301,-5.64,0.417364817767));+#3947=CIRCLE('',#3948,0.1);+#3948=AXIS2_PLACEMENT_3D('',#3949,#3596,#3597);+#3949=CARTESIAN_POINT('',(-3.25,-5.64,0.4));+#3950=ORIENTED_EDGE('',*,*,#3951,.F.);+#3951=EDGE_CURVE('',#3886,#3945,#3952,.T.);+#3952=LINE('',#3887,#780);+#3953=ORIENTED_EDGE('',*,*,#3885,.F.);+#3954=CYLINDRICAL_SURFACE('',#3955,0.1);+#3955=AXIS2_PLACEMENT_3D('',#3890,#3673,#3597);+#3956=ADVANCED_FACE('',(#3957),#4006,.T.);+#3957=FACE_BOUND('',#3958,.T.);+#3958=EDGE_LOOP('',(#865,#851,#3943,#3959,#3964,#3971,#3976,#3981,#3986,#3992,#3997,#4003));+#3959=ORIENTED_EDGE('',*,*,#3960,.T.);+#3960=EDGE_CURVE('',#3945,#3961,#3963,.T.);+#3961=VERTEX_POINT('',#3962);+#3962=CARTESIAN_POINT('',(-3.380247108853,-5.64,0.206587955583));+#3963=LINE('',#3946,#3603);+#3964=ORIENTED_EDGE('',*,*,#3965,.T.);+#3965=EDGE_CURVE('',#3961,#3966,#3968,.T.);+#3966=VERTEX_POINT('',#3967);+#3967=CARTESIAN_POINT('',(-3.626449047106,-5.64,5.551115123126E-17));+#3968=CIRCLE('',#3969,0.25);+#3969=AXIS2_PLACEMENT_3D('',#3970,#3612,#3613);+#3970=CARTESIAN_POINT('',(-3.626449047106,-5.64,0.25));+#3971=ORIENTED_EDGE('',*,*,#3972,.T.);+#3972=EDGE_CURVE('',#3966,#3973,#3975,.T.);+#3973=VERTEX_POINT('',#3974);+#3974=CARTESIAN_POINT('',(-4.05,-5.64,5.551115123126E-17));+#3975=LINE('',#3967,#768);+#3976=ORIENTED_EDGE('',*,*,#3977,.T.);+#3977=EDGE_CURVE('',#3973,#3978,#3980,.T.);+#3978=VERTEX_POINT('',#3979);+#3979=CARTESIAN_POINT('',(-4.05,-5.64,0.15));+#3980=LINE('',#3974,#754);+#3981=ORIENTED_EDGE('',*,*,#3982,.T.);+#3982=EDGE_CURVE('',#3978,#3983,#3985,.T.);+#3983=VERTEX_POINT('',#3984);+#3984=CARTESIAN_POINT('',(-3.626449047106,-5.64,0.15));+#3985=LINE('',#3979,#718);+#3986=ORIENTED_EDGE('',*,*,#3987,.T.);+#3987=EDGE_CURVE('',#3983,#3988,#3990,.T.);+#3988=VERTEX_POINT('',#3989);+#3989=CARTESIAN_POINT('',(-3.527968271805,-5.64,0.232635182233));+#3990=CIRCLE('',#3991,0.1);+#3991=AXIS2_PLACEMENT_3D('',#3970,#3635,#3636);+#3992=ORIENTED_EDGE('',*,*,#3993,.T.);+#3993=EDGE_CURVE('',#3988,#3994,#3996,.T.);+#3994=VERTEX_POINT('',#3995);+#3995=CARTESIAN_POINT('',(-3.496201938253,-5.64,0.443412044417));+#3996=LINE('',#3989,#3642);+#3997=ORIENTED_EDGE('',*,*,#3998,.T.);+#3998=EDGE_CURVE('',#3994,#3999,#4001,.T.);+#3999=VERTEX_POINT('',#4000);+#4000=CARTESIAN_POINT('',(-3.25,-5.64,0.65));+#4001=CIRCLE('',#4002,0.25);+#4002=AXIS2_PLACEMENT_3D('',#3949,#3649,#3650);+#4003=ORIENTED_EDGE('',*,*,#4004,.T.);+#4004=EDGE_CURVE('',#3999,#867,#4005,.T.);+#4005=LINE('',#4000,#718);+#4006=PLANE('',#4007);+#4007=AXIS2_PLACEMENT_3D('',#4008,#781,#13);+#4008=CARTESIAN_POINT('',(-3.487377466565,-5.64,0.305338822795));+#4009=ADVANCED_FACE('',(#4010),#724,.F.);+#4010=FACE_BOUND('',#4011,.F.);+#4011=EDGE_LOOP('',(#4012,#4013,#4017,#4018));+#4012=ORIENTED_EDGE('',*,*,#879,.T.);+#4013=ORIENTED_EDGE('',*,*,#4014,.T.);+#4014=EDGE_CURVE('',#874,#3045,#4015,.T.);+#4015=LINE('',#4016,#718);+#4016=CARTESIAN_POINT('',(-3.25,-5.36,0.65));+#4017=ORIENTED_EDGE('',*,*,#3044,.F.);+#4018=ORIENTED_EDGE('',*,*,#4019,.F.);+#4019=EDGE_CURVE('',#867,#3041,#4005,.T.);+#4020=ADVANCED_FACE('',(#4021),#4077,.F.);+#4021=FACE_BOUND('',#4022,.F.);+#4022=EDGE_LOOP('',(#4023,#4024,#4025,#4032,#4037,#4044,#4049,#4054,#4059,#4065,#4070,#4075));+#4023=ORIENTED_EDGE('',*,*,#873,.F.);+#4024=ORIENTED_EDGE('',*,*,#884,.T.);+#4025=ORIENTED_EDGE('',*,*,#4026,.T.);+#4026=EDGE_CURVE('',#885,#4027,#4029,.T.);+#4027=VERTEX_POINT('',#4028);+#4028=CARTESIAN_POINT('',(-3.348480775301,-5.36,0.417364817767));+#4029=CIRCLE('',#4030,0.1);+#4030=AXIS2_PLACEMENT_3D('',#4031,#3596,#3597);+#4031=CARTESIAN_POINT('',(-3.25,-5.36,0.4));+#4032=ORIENTED_EDGE('',*,*,#4033,.T.);+#4033=EDGE_CURVE('',#4027,#4034,#4036,.T.);+#4034=VERTEX_POINT('',#4035);+#4035=CARTESIAN_POINT('',(-3.380247108853,-5.36,0.206587955583));+#4036=LINE('',#4028,#3603);+#4037=ORIENTED_EDGE('',*,*,#4038,.T.);+#4038=EDGE_CURVE('',#4034,#4039,#4041,.T.);+#4039=VERTEX_POINT('',#4040);+#4040=CARTESIAN_POINT('',(-3.626449047106,-5.36,5.551115123126E-17));+#4041=CIRCLE('',#4042,0.25);+#4042=AXIS2_PLACEMENT_3D('',#4043,#3612,#3613);+#4043=CARTESIAN_POINT('',(-3.626449047106,-5.36,0.25));+#4044=ORIENTED_EDGE('',*,*,#4045,.T.);+#4045=EDGE_CURVE('',#4039,#4046,#4048,.T.);+#4046=VERTEX_POINT('',#4047);+#4047=CARTESIAN_POINT('',(-4.05,-5.36,5.551115123126E-17));+#4048=LINE('',#4040,#768);+#4049=ORIENTED_EDGE('',*,*,#4050,.T.);+#4050=EDGE_CURVE('',#4046,#4051,#4053,.T.);+#4051=VERTEX_POINT('',#4052);+#4052=CARTESIAN_POINT('',(-4.05,-5.36,0.15));+#4053=LINE('',#4047,#754);+#4054=ORIENTED_EDGE('',*,*,#4055,.T.);+#4055=EDGE_CURVE('',#4051,#4056,#4058,.T.);+#4056=VERTEX_POINT('',#4057);+#4057=CARTESIAN_POINT('',(-3.626449047106,-5.36,0.15));+#4058=LINE('',#4052,#718);+#4059=ORIENTED_EDGE('',*,*,#4060,.T.);+#4060=EDGE_CURVE('',#4056,#4061,#4063,.T.);+#4061=VERTEX_POINT('',#4062);+#4062=CARTESIAN_POINT('',(-3.527968271805,-5.36,0.232635182233));+#4063=CIRCLE('',#4064,0.1);+#4064=AXIS2_PLACEMENT_3D('',#4043,#3635,#3636);+#4065=ORIENTED_EDGE('',*,*,#4066,.T.);+#4066=EDGE_CURVE('',#4061,#4067,#4069,.T.);+#4067=VERTEX_POINT('',#4068);+#4068=CARTESIAN_POINT('',(-3.496201938253,-5.36,0.443412044417));+#4069=LINE('',#4062,#3642);+#4070=ORIENTED_EDGE('',*,*,#4071,.T.);+#4071=EDGE_CURVE('',#4067,#4072,#4073,.T.);+#4072=VERTEX_POINT('',#4016);+#4073=CIRCLE('',#4074,0.25);+#4074=AXIS2_PLACEMENT_3D('',#4031,#3649,#3650);+#4075=ORIENTED_EDGE('',*,*,#4076,.T.);+#4076=EDGE_CURVE('',#4072,#874,#4015,.T.);+#4077=PLANE('',#4078);+#4078=AXIS2_PLACEMENT_3D('',#4079,#781,#13);+#4079=CARTESIAN_POINT('',(-3.487377466565,-5.36,0.305338822795));+#4080=ADVANCED_FACE('',(#4081),#4095,.F.);+#4081=FACE_BOUND('',#4082,.F.);+#4082=EDGE_LOOP('',(#4083,#4084,#4091,#4094));+#4083=ORIENTED_EDGE('',*,*,#897,.T.);+#4084=ORIENTED_EDGE('',*,*,#4085,.T.);+#4085=EDGE_CURVE('',#892,#4086,#4088,.T.);+#4086=VERTEX_POINT('',#4087);+#4087=CARTESIAN_POINT('',(-3.348480775301,-5.14,0.417364817767));+#4088=CIRCLE('',#4089,0.1);+#4089=AXIS2_PLACEMENT_3D('',#4090,#3596,#3597);+#4090=CARTESIAN_POINT('',(-3.25,-5.14,0.4));+#4091=ORIENTED_EDGE('',*,*,#4092,.F.);+#4092=EDGE_CURVE('',#4027,#4086,#4093,.T.);+#4093=LINE('',#4028,#780);+#4094=ORIENTED_EDGE('',*,*,#4026,.F.);+#4095=CYLINDRICAL_SURFACE('',#4096,0.1);+#4096=AXIS2_PLACEMENT_3D('',#4031,#3673,#3597);+#4097=ADVANCED_FACE('',(#4098),#4147,.T.);+#4098=FACE_BOUND('',#4099,.T.);+#4099=EDGE_LOOP('',(#904,#890,#4084,#4100,#4105,#4112,#4117,#4122,#4127,#4133,#4138,#4144));+#4100=ORIENTED_EDGE('',*,*,#4101,.T.);+#4101=EDGE_CURVE('',#4086,#4102,#4104,.T.);+#4102=VERTEX_POINT('',#4103);+#4103=CARTESIAN_POINT('',(-3.380247108853,-5.14,0.206587955583));+#4104=LINE('',#4087,#3603);+#4105=ORIENTED_EDGE('',*,*,#4106,.T.);+#4106=EDGE_CURVE('',#4102,#4107,#4109,.T.);+#4107=VERTEX_POINT('',#4108);+#4108=CARTESIAN_POINT('',(-3.626449047106,-5.14,5.551115123126E-17));+#4109=CIRCLE('',#4110,0.25);+#4110=AXIS2_PLACEMENT_3D('',#4111,#3612,#3613);+#4111=CARTESIAN_POINT('',(-3.626449047106,-5.14,0.25));+#4112=ORIENTED_EDGE('',*,*,#4113,.T.);+#4113=EDGE_CURVE('',#4107,#4114,#4116,.T.);+#4114=VERTEX_POINT('',#4115);+#4115=CARTESIAN_POINT('',(-4.05,-5.14,5.551115123126E-17));+#4116=LINE('',#4108,#768);+#4117=ORIENTED_EDGE('',*,*,#4118,.T.);+#4118=EDGE_CURVE('',#4114,#4119,#4121,.T.);+#4119=VERTEX_POINT('',#4120);+#4120=CARTESIAN_POINT('',(-4.05,-5.14,0.15));+#4121=LINE('',#4115,#754);+#4122=ORIENTED_EDGE('',*,*,#4123,.T.);+#4123=EDGE_CURVE('',#4119,#4124,#4126,.T.);+#4124=VERTEX_POINT('',#4125);+#4125=CARTESIAN_POINT('',(-3.626449047106,-5.14,0.15));+#4126=LINE('',#4120,#718);+#4127=ORIENTED_EDGE('',*,*,#4128,.T.);+#4128=EDGE_CURVE('',#4124,#4129,#4131,.T.);+#4129=VERTEX_POINT('',#4130);+#4130=CARTESIAN_POINT('',(-3.527968271805,-5.14,0.232635182233));+#4131=CIRCLE('',#4132,0.1);+#4132=AXIS2_PLACEMENT_3D('',#4111,#3635,#3636);+#4133=ORIENTED_EDGE('',*,*,#4134,.T.);+#4134=EDGE_CURVE('',#4129,#4135,#4137,.T.);+#4135=VERTEX_POINT('',#4136);+#4136=CARTESIAN_POINT('',(-3.496201938253,-5.14,0.443412044417));+#4137=LINE('',#4130,#3642);+#4138=ORIENTED_EDGE('',*,*,#4139,.T.);+#4139=EDGE_CURVE('',#4135,#4140,#4142,.T.);+#4140=VERTEX_POINT('',#4141);+#4141=CARTESIAN_POINT('',(-3.25,-5.14,0.65));+#4142=CIRCLE('',#4143,0.25);+#4143=AXIS2_PLACEMENT_3D('',#4090,#3649,#3650);+#4144=ORIENTED_EDGE('',*,*,#4145,.T.);+#4145=EDGE_CURVE('',#4140,#906,#4146,.T.);+#4146=LINE('',#4141,#718);+#4147=PLANE('',#4148);+#4148=AXIS2_PLACEMENT_3D('',#4149,#781,#13);+#4149=CARTESIAN_POINT('',(-3.487377466565,-5.14,0.305338822795));+#4150=ADVANCED_FACE('',(#4151),#724,.F.);+#4151=FACE_BOUND('',#4152,.F.);+#4152=EDGE_LOOP('',(#4153,#4154,#4158,#4159));+#4153=ORIENTED_EDGE('',*,*,#918,.T.);+#4154=ORIENTED_EDGE('',*,*,#4155,.T.);+#4155=EDGE_CURVE('',#913,#3053,#4156,.T.);+#4156=LINE('',#4157,#718);+#4157=CARTESIAN_POINT('',(-3.25,-4.86,0.65));+#4158=ORIENTED_EDGE('',*,*,#3052,.F.);+#4159=ORIENTED_EDGE('',*,*,#4160,.F.);+#4160=EDGE_CURVE('',#906,#3049,#4146,.T.);+#4161=ADVANCED_FACE('',(#4162),#4218,.F.);+#4162=FACE_BOUND('',#4163,.F.);+#4163=EDGE_LOOP('',(#4164,#4165,#4166,#4173,#4178,#4185,#4190,#4195,#4200,#4206,#4211,#4216));+#4164=ORIENTED_EDGE('',*,*,#912,.F.);+#4165=ORIENTED_EDGE('',*,*,#923,.T.);+#4166=ORIENTED_EDGE('',*,*,#4167,.T.);+#4167=EDGE_CURVE('',#924,#4168,#4170,.T.);+#4168=VERTEX_POINT('',#4169);+#4169=CARTESIAN_POINT('',(-3.348480775301,-4.86,0.417364817767));+#4170=CIRCLE('',#4171,0.1);+#4171=AXIS2_PLACEMENT_3D('',#4172,#3596,#3597);+#4172=CARTESIAN_POINT('',(-3.25,-4.86,0.4));+#4173=ORIENTED_EDGE('',*,*,#4174,.T.);+#4174=EDGE_CURVE('',#4168,#4175,#4177,.T.);+#4175=VERTEX_POINT('',#4176);+#4176=CARTESIAN_POINT('',(-3.380247108853,-4.86,0.206587955583));+#4177=LINE('',#4169,#3603);+#4178=ORIENTED_EDGE('',*,*,#4179,.T.);+#4179=EDGE_CURVE('',#4175,#4180,#4182,.T.);+#4180=VERTEX_POINT('',#4181);+#4181=CARTESIAN_POINT('',(-3.626449047106,-4.86,5.551115123126E-17));+#4182=CIRCLE('',#4183,0.25);+#4183=AXIS2_PLACEMENT_3D('',#4184,#3612,#3613);+#4184=CARTESIAN_POINT('',(-3.626449047106,-4.86,0.25));+#4185=ORIENTED_EDGE('',*,*,#4186,.T.);+#4186=EDGE_CURVE('',#4180,#4187,#4189,.T.);+#4187=VERTEX_POINT('',#4188);+#4188=CARTESIAN_POINT('',(-4.05,-4.86,5.551115123126E-17));+#4189=LINE('',#4181,#768);+#4190=ORIENTED_EDGE('',*,*,#4191,.T.);+#4191=EDGE_CURVE('',#4187,#4192,#4194,.T.);+#4192=VERTEX_POINT('',#4193);+#4193=CARTESIAN_POINT('',(-4.05,-4.86,0.15));+#4194=LINE('',#4188,#754);+#4195=ORIENTED_EDGE('',*,*,#4196,.T.);+#4196=EDGE_CURVE('',#4192,#4197,#4199,.T.);+#4197=VERTEX_POINT('',#4198);+#4198=CARTESIAN_POINT('',(-3.626449047106,-4.86,0.15));+#4199=LINE('',#4193,#718);+#4200=ORIENTED_EDGE('',*,*,#4201,.T.);+#4201=EDGE_CURVE('',#4197,#4202,#4204,.T.);+#4202=VERTEX_POINT('',#4203);+#4203=CARTESIAN_POINT('',(-3.527968271805,-4.86,0.232635182233));+#4204=CIRCLE('',#4205,0.1);+#4205=AXIS2_PLACEMENT_3D('',#4184,#3635,#3636);+#4206=ORIENTED_EDGE('',*,*,#4207,.T.);+#4207=EDGE_CURVE('',#4202,#4208,#4210,.T.);+#4208=VERTEX_POINT('',#4209);+#4209=CARTESIAN_POINT('',(-3.496201938253,-4.86,0.443412044417));+#4210=LINE('',#4203,#3642);+#4211=ORIENTED_EDGE('',*,*,#4212,.T.);+#4212=EDGE_CURVE('',#4208,#4213,#4214,.T.);+#4213=VERTEX_POINT('',#4157);+#4214=CIRCLE('',#4215,0.25);+#4215=AXIS2_PLACEMENT_3D('',#4172,#3649,#3650);+#4216=ORIENTED_EDGE('',*,*,#4217,.T.);+#4217=EDGE_CURVE('',#4213,#913,#4156,.T.);+#4218=PLANE('',#4219);+#4219=AXIS2_PLACEMENT_3D('',#4220,#781,#13);+#4220=CARTESIAN_POINT('',(-3.487377466565,-4.86,0.305338822795));+#4221=ADVANCED_FACE('',(#4222),#4236,.F.);+#4222=FACE_BOUND('',#4223,.F.);+#4223=EDGE_LOOP('',(#4224,#4225,#4232,#4235));+#4224=ORIENTED_EDGE('',*,*,#936,.T.);+#4225=ORIENTED_EDGE('',*,*,#4226,.T.);+#4226=EDGE_CURVE('',#931,#4227,#4229,.T.);+#4227=VERTEX_POINT('',#4228);+#4228=CARTESIAN_POINT('',(-3.348480775301,-4.64,0.417364817767));+#4229=CIRCLE('',#4230,0.1);+#4230=AXIS2_PLACEMENT_3D('',#4231,#3596,#3597);+#4231=CARTESIAN_POINT('',(-3.25,-4.64,0.4));+#4232=ORIENTED_EDGE('',*,*,#4233,.F.);+#4233=EDGE_CURVE('',#4168,#4227,#4234,.T.);+#4234=LINE('',#4169,#780);+#4235=ORIENTED_EDGE('',*,*,#4167,.F.);+#4236=CYLINDRICAL_SURFACE('',#4237,0.1);+#4237=AXIS2_PLACEMENT_3D('',#4172,#3673,#3597);+#4238=ADVANCED_FACE('',(#4239),#4288,.T.);+#4239=FACE_BOUND('',#4240,.T.);+#4240=EDGE_LOOP('',(#943,#929,#4225,#4241,#4246,#4253,#4258,#4263,#4268,#4274,#4279,#4285));+#4241=ORIENTED_EDGE('',*,*,#4242,.T.);+#4242=EDGE_CURVE('',#4227,#4243,#4245,.T.);+#4243=VERTEX_POINT('',#4244);+#4244=CARTESIAN_POINT('',(-3.380247108853,-4.64,0.206587955583));+#4245=LINE('',#4228,#3603);+#4246=ORIENTED_EDGE('',*,*,#4247,.T.);+#4247=EDGE_CURVE('',#4243,#4248,#4250,.T.);+#4248=VERTEX_POINT('',#4249);+#4249=CARTESIAN_POINT('',(-3.626449047106,-4.64,5.551115123126E-17));+#4250=CIRCLE('',#4251,0.25);+#4251=AXIS2_PLACEMENT_3D('',#4252,#3612,#3613);+#4252=CARTESIAN_POINT('',(-3.626449047106,-4.64,0.25));+#4253=ORIENTED_EDGE('',*,*,#4254,.T.);+#4254=EDGE_CURVE('',#4248,#4255,#4257,.T.);+#4255=VERTEX_POINT('',#4256);+#4256=CARTESIAN_POINT('',(-4.05,-4.64,5.551115123126E-17));+#4257=LINE('',#4249,#768);+#4258=ORIENTED_EDGE('',*,*,#4259,.T.);+#4259=EDGE_CURVE('',#4255,#4260,#4262,.T.);+#4260=VERTEX_POINT('',#4261);+#4261=CARTESIAN_POINT('',(-4.05,-4.64,0.15));+#4262=LINE('',#4256,#754);+#4263=ORIENTED_EDGE('',*,*,#4264,.T.);+#4264=EDGE_CURVE('',#4260,#4265,#4267,.T.);+#4265=VERTEX_POINT('',#4266);+#4266=CARTESIAN_POINT('',(-3.626449047106,-4.64,0.15));+#4267=LINE('',#4261,#718);+#4268=ORIENTED_EDGE('',*,*,#4269,.T.);+#4269=EDGE_CURVE('',#4265,#4270,#4272,.T.);+#4270=VERTEX_POINT('',#4271);+#4271=CARTESIAN_POINT('',(-3.527968271805,-4.64,0.232635182233));+#4272=CIRCLE('',#4273,0.1);+#4273=AXIS2_PLACEMENT_3D('',#4252,#3635,#3636);+#4274=ORIENTED_EDGE('',*,*,#4275,.T.);+#4275=EDGE_CURVE('',#4270,#4276,#4278,.T.);+#4276=VERTEX_POINT('',#4277);+#4277=CARTESIAN_POINT('',(-3.496201938253,-4.64,0.443412044417));+#4278=LINE('',#4271,#3642);+#4279=ORIENTED_EDGE('',*,*,#4280,.T.);+#4280=EDGE_CURVE('',#4276,#4281,#4283,.T.);+#4281=VERTEX_POINT('',#4282);+#4282=CARTESIAN_POINT('',(-3.25,-4.64,0.65));+#4283=CIRCLE('',#4284,0.25);+#4284=AXIS2_PLACEMENT_3D('',#4231,#3649,#3650);+#4285=ORIENTED_EDGE('',*,*,#4286,.T.);+#4286=EDGE_CURVE('',#4281,#945,#4287,.T.);+#4287=LINE('',#4282,#718);+#4288=PLANE('',#4289);+#4289=AXIS2_PLACEMENT_3D('',#4290,#781,#13);+#4290=CARTESIAN_POINT('',(-3.487377466565,-4.64,0.305338822795));+#4291=ADVANCED_FACE('',(#4292),#724,.F.);+#4292=FACE_BOUND('',#4293,.F.);+#4293=EDGE_LOOP('',(#4294,#4295,#4299,#4300));+#4294=ORIENTED_EDGE('',*,*,#957,.T.);+#4295=ORIENTED_EDGE('',*,*,#4296,.T.);+#4296=EDGE_CURVE('',#952,#3061,#4297,.T.);+#4297=LINE('',#4298,#718);+#4298=CARTESIAN_POINT('',(-3.25,-4.36,0.65));+#4299=ORIENTED_EDGE('',*,*,#3060,.F.);+#4300=ORIENTED_EDGE('',*,*,#4301,.F.);+#4301=EDGE_CURVE('',#945,#3057,#4287,.T.);+#4302=ADVANCED_FACE('',(#4303),#4359,.F.);+#4303=FACE_BOUND('',#4304,.F.);+#4304=EDGE_LOOP('',(#4305,#4306,#4307,#4314,#4319,#4326,#4331,#4336,#4341,#4347,#4352,#4357));+#4305=ORIENTED_EDGE('',*,*,#951,.F.);+#4306=ORIENTED_EDGE('',*,*,#962,.T.);+#4307=ORIENTED_EDGE('',*,*,#4308,.T.);+#4308=EDGE_CURVE('',#963,#4309,#4311,.T.);+#4309=VERTEX_POINT('',#4310);+#4310=CARTESIAN_POINT('',(-3.348480775301,-4.36,0.417364817767));+#4311=CIRCLE('',#4312,0.1);+#4312=AXIS2_PLACEMENT_3D('',#4313,#3596,#3597);+#4313=CARTESIAN_POINT('',(-3.25,-4.36,0.4));+#4314=ORIENTED_EDGE('',*,*,#4315,.T.);+#4315=EDGE_CURVE('',#4309,#4316,#4318,.T.);+#4316=VERTEX_POINT('',#4317);+#4317=CARTESIAN_POINT('',(-3.380247108853,-4.36,0.206587955583));+#4318=LINE('',#4310,#3603);+#4319=ORIENTED_EDGE('',*,*,#4320,.T.);+#4320=EDGE_CURVE('',#4316,#4321,#4323,.T.);+#4321=VERTEX_POINT('',#4322);+#4322=CARTESIAN_POINT('',(-3.626449047106,-4.36,5.551115123126E-17));+#4323=CIRCLE('',#4324,0.25);+#4324=AXIS2_PLACEMENT_3D('',#4325,#3612,#3613);+#4325=CARTESIAN_POINT('',(-3.626449047106,-4.36,0.25));+#4326=ORIENTED_EDGE('',*,*,#4327,.T.);+#4327=EDGE_CURVE('',#4321,#4328,#4330,.T.);+#4328=VERTEX_POINT('',#4329);+#4329=CARTESIAN_POINT('',(-4.05,-4.36,5.551115123126E-17));+#4330=LINE('',#4322,#768);+#4331=ORIENTED_EDGE('',*,*,#4332,.T.);+#4332=EDGE_CURVE('',#4328,#4333,#4335,.T.);+#4333=VERTEX_POINT('',#4334);+#4334=CARTESIAN_POINT('',(-4.05,-4.36,0.15));+#4335=LINE('',#4329,#754);+#4336=ORIENTED_EDGE('',*,*,#4337,.T.);+#4337=EDGE_CURVE('',#4333,#4338,#4340,.T.);+#4338=VERTEX_POINT('',#4339);+#4339=CARTESIAN_POINT('',(-3.626449047106,-4.36,0.15));+#4340=LINE('',#4334,#718);+#4341=ORIENTED_EDGE('',*,*,#4342,.T.);+#4342=EDGE_CURVE('',#4338,#4343,#4345,.T.);+#4343=VERTEX_POINT('',#4344);+#4344=CARTESIAN_POINT('',(-3.527968271805,-4.36,0.232635182233));+#4345=CIRCLE('',#4346,0.1);+#4346=AXIS2_PLACEMENT_3D('',#4325,#3635,#3636);+#4347=ORIENTED_EDGE('',*,*,#4348,.T.);+#4348=EDGE_CURVE('',#4343,#4349,#4351,.T.);+#4349=VERTEX_POINT('',#4350);+#4350=CARTESIAN_POINT('',(-3.496201938253,-4.36,0.443412044417));+#4351=LINE('',#4344,#3642);+#4352=ORIENTED_EDGE('',*,*,#4353,.T.);+#4353=EDGE_CURVE('',#4349,#4354,#4355,.T.);+#4354=VERTEX_POINT('',#4298);+#4355=CIRCLE('',#4356,0.25);+#4356=AXIS2_PLACEMENT_3D('',#4313,#3649,#3650);+#4357=ORIENTED_EDGE('',*,*,#4358,.T.);+#4358=EDGE_CURVE('',#4354,#952,#4297,.T.);+#4359=PLANE('',#4360);+#4360=AXIS2_PLACEMENT_3D('',#4361,#781,#13);+#4361=CARTESIAN_POINT('',(-3.487377466565,-4.36,0.305338822795));+#4362=ADVANCED_FACE('',(#4363),#4377,.F.);+#4363=FACE_BOUND('',#4364,.F.);+#4364=EDGE_LOOP('',(#4365,#4366,#4373,#4376));+#4365=ORIENTED_EDGE('',*,*,#975,.T.);+#4366=ORIENTED_EDGE('',*,*,#4367,.T.);+#4367=EDGE_CURVE('',#970,#4368,#4370,.T.);+#4368=VERTEX_POINT('',#4369);+#4369=CARTESIAN_POINT('',(-3.348480775301,-4.14,0.417364817767));+#4370=CIRCLE('',#4371,0.1);+#4371=AXIS2_PLACEMENT_3D('',#4372,#3596,#3597);+#4372=CARTESIAN_POINT('',(-3.25,-4.14,0.4));+#4373=ORIENTED_EDGE('',*,*,#4374,.F.);+#4374=EDGE_CURVE('',#4309,#4368,#4375,.T.);+#4375=LINE('',#4310,#780);+#4376=ORIENTED_EDGE('',*,*,#4308,.F.);+#4377=CYLINDRICAL_SURFACE('',#4378,0.1);+#4378=AXIS2_PLACEMENT_3D('',#4313,#3673,#3597);+#4379=ADVANCED_FACE('',(#4380),#4429,.T.);+#4380=FACE_BOUND('',#4381,.T.);+#4381=EDGE_LOOP('',(#982,#968,#4366,#4382,#4387,#4394,#4399,#4404,#4409,#4415,#4420,#4426));+#4382=ORIENTED_EDGE('',*,*,#4383,.T.);+#4383=EDGE_CURVE('',#4368,#4384,#4386,.T.);+#4384=VERTEX_POINT('',#4385);+#4385=CARTESIAN_POINT('',(-3.380247108853,-4.14,0.206587955583));+#4386=LINE('',#4369,#3603);+#4387=ORIENTED_EDGE('',*,*,#4388,.T.);+#4388=EDGE_CURVE('',#4384,#4389,#4391,.T.);+#4389=VERTEX_POINT('',#4390);+#4390=CARTESIAN_POINT('',(-3.626449047106,-4.14,5.551115123126E-17));+#4391=CIRCLE('',#4392,0.25);+#4392=AXIS2_PLACEMENT_3D('',#4393,#3612,#3613);+#4393=CARTESIAN_POINT('',(-3.626449047106,-4.14,0.25));+#4394=ORIENTED_EDGE('',*,*,#4395,.T.);+#4395=EDGE_CURVE('',#4389,#4396,#4398,.T.);+#4396=VERTEX_POINT('',#4397);+#4397=CARTESIAN_POINT('',(-4.05,-4.14,5.551115123126E-17));+#4398=LINE('',#4390,#768);+#4399=ORIENTED_EDGE('',*,*,#4400,.T.);+#4400=EDGE_CURVE('',#4396,#4401,#4403,.T.);+#4401=VERTEX_POINT('',#4402);+#4402=CARTESIAN_POINT('',(-4.05,-4.14,0.15));+#4403=LINE('',#4397,#754);+#4404=ORIENTED_EDGE('',*,*,#4405,.T.);+#4405=EDGE_CURVE('',#4401,#4406,#4408,.T.);+#4406=VERTEX_POINT('',#4407);+#4407=CARTESIAN_POINT('',(-3.626449047106,-4.14,0.15));+#4408=LINE('',#4402,#718);+#4409=ORIENTED_EDGE('',*,*,#4410,.T.);+#4410=EDGE_CURVE('',#4406,#4411,#4413,.T.);+#4411=VERTEX_POINT('',#4412);+#4412=CARTESIAN_POINT('',(-3.527968271805,-4.14,0.232635182233));+#4413=CIRCLE('',#4414,0.1);+#4414=AXIS2_PLACEMENT_3D('',#4393,#3635,#3636);+#4415=ORIENTED_EDGE('',*,*,#4416,.T.);+#4416=EDGE_CURVE('',#4411,#4417,#4419,.T.);+#4417=VERTEX_POINT('',#4418);+#4418=CARTESIAN_POINT('',(-3.496201938253,-4.14,0.443412044417));+#4419=LINE('',#4412,#3642);+#4420=ORIENTED_EDGE('',*,*,#4421,.T.);+#4421=EDGE_CURVE('',#4417,#4422,#4424,.T.);+#4422=VERTEX_POINT('',#4423);+#4423=CARTESIAN_POINT('',(-3.25,-4.14,0.65));+#4424=CIRCLE('',#4425,0.25);+#4425=AXIS2_PLACEMENT_3D('',#4372,#3649,#3650);+#4426=ORIENTED_EDGE('',*,*,#4427,.T.);+#4427=EDGE_CURVE('',#4422,#984,#4428,.T.);+#4428=LINE('',#4423,#718);+#4429=PLANE('',#4430);+#4430=AXIS2_PLACEMENT_3D('',#4431,#781,#13);+#4431=CARTESIAN_POINT('',(-3.487377466565,-4.14,0.305338822795));+#4432=ADVANCED_FACE('',(#4433),#724,.F.);+#4433=FACE_BOUND('',#4434,.F.);+#4434=EDGE_LOOP('',(#4435,#4436,#4440,#4441));+#4435=ORIENTED_EDGE('',*,*,#996,.T.);+#4436=ORIENTED_EDGE('',*,*,#4437,.T.);+#4437=EDGE_CURVE('',#991,#3069,#4438,.T.);+#4438=LINE('',#4439,#718);+#4439=CARTESIAN_POINT('',(-3.25,-3.86,0.65));+#4440=ORIENTED_EDGE('',*,*,#3068,.F.);+#4441=ORIENTED_EDGE('',*,*,#4442,.F.);+#4442=EDGE_CURVE('',#984,#3065,#4428,.T.);+#4443=ADVANCED_FACE('',(#4444),#4500,.F.);+#4444=FACE_BOUND('',#4445,.F.);+#4445=EDGE_LOOP('',(#4446,#4447,#4448,#4455,#4460,#4467,#4472,#4477,#4482,#4488,#4493,#4498));+#4446=ORIENTED_EDGE('',*,*,#990,.F.);+#4447=ORIENTED_EDGE('',*,*,#1001,.T.);+#4448=ORIENTED_EDGE('',*,*,#4449,.T.);+#4449=EDGE_CURVE('',#1002,#4450,#4452,.T.);+#4450=VERTEX_POINT('',#4451);+#4451=CARTESIAN_POINT('',(-3.348480775301,-3.86,0.417364817767));+#4452=CIRCLE('',#4453,0.1);+#4453=AXIS2_PLACEMENT_3D('',#4454,#3596,#3597);+#4454=CARTESIAN_POINT('',(-3.25,-3.86,0.4));+#4455=ORIENTED_EDGE('',*,*,#4456,.T.);+#4456=EDGE_CURVE('',#4450,#4457,#4459,.T.);+#4457=VERTEX_POINT('',#4458);+#4458=CARTESIAN_POINT('',(-3.380247108853,-3.86,0.206587955583));+#4459=LINE('',#4451,#3603);+#4460=ORIENTED_EDGE('',*,*,#4461,.T.);+#4461=EDGE_CURVE('',#4457,#4462,#4464,.T.);+#4462=VERTEX_POINT('',#4463);+#4463=CARTESIAN_POINT('',(-3.626449047106,-3.86,5.551115123126E-17));+#4464=CIRCLE('',#4465,0.25);+#4465=AXIS2_PLACEMENT_3D('',#4466,#3612,#3613);+#4466=CARTESIAN_POINT('',(-3.626449047106,-3.86,0.25));+#4467=ORIENTED_EDGE('',*,*,#4468,.T.);+#4468=EDGE_CURVE('',#4462,#4469,#4471,.T.);+#4469=VERTEX_POINT('',#4470);+#4470=CARTESIAN_POINT('',(-4.05,-3.86,5.551115123126E-17));+#4471=LINE('',#4463,#768);+#4472=ORIENTED_EDGE('',*,*,#4473,.T.);+#4473=EDGE_CURVE('',#4469,#4474,#4476,.T.);+#4474=VERTEX_POINT('',#4475);+#4475=CARTESIAN_POINT('',(-4.05,-3.86,0.15));+#4476=LINE('',#4470,#754);+#4477=ORIENTED_EDGE('',*,*,#4478,.T.);+#4478=EDGE_CURVE('',#4474,#4479,#4481,.T.);+#4479=VERTEX_POINT('',#4480);+#4480=CARTESIAN_POINT('',(-3.626449047106,-3.86,0.15));+#4481=LINE('',#4475,#718);+#4482=ORIENTED_EDGE('',*,*,#4483,.T.);+#4483=EDGE_CURVE('',#4479,#4484,#4486,.T.);+#4484=VERTEX_POINT('',#4485);+#4485=CARTESIAN_POINT('',(-3.527968271805,-3.86,0.232635182233));+#4486=CIRCLE('',#4487,0.1);+#4487=AXIS2_PLACEMENT_3D('',#4466,#3635,#3636);+#4488=ORIENTED_EDGE('',*,*,#4489,.T.);+#4489=EDGE_CURVE('',#4484,#4490,#4492,.T.);+#4490=VERTEX_POINT('',#4491);+#4491=CARTESIAN_POINT('',(-3.496201938253,-3.86,0.443412044417));+#4492=LINE('',#4485,#3642);+#4493=ORIENTED_EDGE('',*,*,#4494,.T.);+#4494=EDGE_CURVE('',#4490,#4495,#4496,.T.);+#4495=VERTEX_POINT('',#4439);+#4496=CIRCLE('',#4497,0.25);+#4497=AXIS2_PLACEMENT_3D('',#4454,#3649,#3650);+#4498=ORIENTED_EDGE('',*,*,#4499,.T.);+#4499=EDGE_CURVE('',#4495,#991,#4438,.T.);+#4500=PLANE('',#4501);+#4501=AXIS2_PLACEMENT_3D('',#4502,#781,#13);+#4502=CARTESIAN_POINT('',(-3.487377466565,-3.86,0.305338822795));+#4503=ADVANCED_FACE('',(#4504),#4518,.F.);+#4504=FACE_BOUND('',#4505,.F.);+#4505=EDGE_LOOP('',(#4506,#4507,#4514,#4517));+#4506=ORIENTED_EDGE('',*,*,#1014,.T.);+#4507=ORIENTED_EDGE('',*,*,#4508,.T.);+#4508=EDGE_CURVE('',#1009,#4509,#4511,.T.);+#4509=VERTEX_POINT('',#4510);+#4510=CARTESIAN_POINT('',(-3.348480775301,-3.64,0.417364817767));+#4511=CIRCLE('',#4512,0.1);+#4512=AXIS2_PLACEMENT_3D('',#4513,#3596,#3597);+#4513=CARTESIAN_POINT('',(-3.25,-3.64,0.4));+#4514=ORIENTED_EDGE('',*,*,#4515,.F.);+#4515=EDGE_CURVE('',#4450,#4509,#4516,.T.);+#4516=LINE('',#4451,#780);+#4517=ORIENTED_EDGE('',*,*,#4449,.F.);+#4518=CYLINDRICAL_SURFACE('',#4519,0.1);+#4519=AXIS2_PLACEMENT_3D('',#4454,#3673,#3597);+#4520=ADVANCED_FACE('',(#4521),#4570,.T.);+#4521=FACE_BOUND('',#4522,.T.);+#4522=EDGE_LOOP('',(#1021,#1007,#4507,#4523,#4528,#4535,#4540,#4545,#4550,#4556,#4561,#4567));+#4523=ORIENTED_EDGE('',*,*,#4524,.T.);+#4524=EDGE_CURVE('',#4509,#4525,#4527,.T.);+#4525=VERTEX_POINT('',#4526);+#4526=CARTESIAN_POINT('',(-3.380247108853,-3.64,0.206587955583));+#4527=LINE('',#4510,#3603);+#4528=ORIENTED_EDGE('',*,*,#4529,.T.);+#4529=EDGE_CURVE('',#4525,#4530,#4532,.T.);+#4530=VERTEX_POINT('',#4531);+#4531=CARTESIAN_POINT('',(-3.626449047106,-3.64,5.551115123126E-17));+#4532=CIRCLE('',#4533,0.25);+#4533=AXIS2_PLACEMENT_3D('',#4534,#3612,#3613);+#4534=CARTESIAN_POINT('',(-3.626449047106,-3.64,0.25));+#4535=ORIENTED_EDGE('',*,*,#4536,.T.);+#4536=EDGE_CURVE('',#4530,#4537,#4539,.T.);+#4537=VERTEX_POINT('',#4538);+#4538=CARTESIAN_POINT('',(-4.05,-3.64,5.551115123126E-17));+#4539=LINE('',#4531,#768);+#4540=ORIENTED_EDGE('',*,*,#4541,.T.);+#4541=EDGE_CURVE('',#4537,#4542,#4544,.T.);+#4542=VERTEX_POINT('',#4543);+#4543=CARTESIAN_POINT('',(-4.05,-3.64,0.15));+#4544=LINE('',#4538,#754);+#4545=ORIENTED_EDGE('',*,*,#4546,.T.);+#4546=EDGE_CURVE('',#4542,#4547,#4549,.T.);+#4547=VERTEX_POINT('',#4548);+#4548=CARTESIAN_POINT('',(-3.626449047106,-3.64,0.15));+#4549=LINE('',#4543,#718);+#4550=ORIENTED_EDGE('',*,*,#4551,.T.);+#4551=EDGE_CURVE('',#4547,#4552,#4554,.T.);+#4552=VERTEX_POINT('',#4553);+#4553=CARTESIAN_POINT('',(-3.527968271805,-3.64,0.232635182233));+#4554=CIRCLE('',#4555,0.1);+#4555=AXIS2_PLACEMENT_3D('',#4534,#3635,#3636);+#4556=ORIENTED_EDGE('',*,*,#4557,.T.);+#4557=EDGE_CURVE('',#4552,#4558,#4560,.T.);+#4558=VERTEX_POINT('',#4559);+#4559=CARTESIAN_POINT('',(-3.496201938253,-3.64,0.443412044417));+#4560=LINE('',#4553,#3642);+#4561=ORIENTED_EDGE('',*,*,#4562,.T.);+#4562=EDGE_CURVE('',#4558,#4563,#4565,.T.);+#4563=VERTEX_POINT('',#4564);+#4564=CARTESIAN_POINT('',(-3.25,-3.64,0.65));+#4565=CIRCLE('',#4566,0.25);+#4566=AXIS2_PLACEMENT_3D('',#4513,#3649,#3650);+#4567=ORIENTED_EDGE('',*,*,#4568,.T.);+#4568=EDGE_CURVE('',#4563,#1023,#4569,.T.);+#4569=LINE('',#4564,#718);+#4570=PLANE('',#4571);+#4571=AXIS2_PLACEMENT_3D('',#4572,#781,#13);+#4572=CARTESIAN_POINT('',(-3.487377466565,-3.64,0.305338822795));+#4573=ADVANCED_FACE('',(#4574),#724,.F.);+#4574=FACE_BOUND('',#4575,.F.);+#4575=EDGE_LOOP('',(#4576,#4577,#4581,#4582));+#4576=ORIENTED_EDGE('',*,*,#1035,.T.);+#4577=ORIENTED_EDGE('',*,*,#4578,.T.);+#4578=EDGE_CURVE('',#1030,#3077,#4579,.T.);+#4579=LINE('',#4580,#718);+#4580=CARTESIAN_POINT('',(-3.25,-3.36,0.65));+#4581=ORIENTED_EDGE('',*,*,#3076,.F.);+#4582=ORIENTED_EDGE('',*,*,#4583,.F.);+#4583=EDGE_CURVE('',#1023,#3073,#4569,.T.);+#4584=ADVANCED_FACE('',(#4585),#4641,.F.);+#4585=FACE_BOUND('',#4586,.F.);+#4586=EDGE_LOOP('',(#4587,#4588,#4589,#4596,#4601,#4608,#4613,#4618,#4623,#4629,#4634,#4639));+#4587=ORIENTED_EDGE('',*,*,#1029,.F.);+#4588=ORIENTED_EDGE('',*,*,#1040,.T.);+#4589=ORIENTED_EDGE('',*,*,#4590,.T.);+#4590=EDGE_CURVE('',#1041,#4591,#4593,.T.);+#4591=VERTEX_POINT('',#4592);+#4592=CARTESIAN_POINT('',(-3.348480775301,-3.36,0.417364817767));+#4593=CIRCLE('',#4594,0.1);+#4594=AXIS2_PLACEMENT_3D('',#4595,#3596,#3597);+#4595=CARTESIAN_POINT('',(-3.25,-3.36,0.4));+#4596=ORIENTED_EDGE('',*,*,#4597,.T.);+#4597=EDGE_CURVE('',#4591,#4598,#4600,.T.);+#4598=VERTEX_POINT('',#4599);+#4599=CARTESIAN_POINT('',(-3.380247108853,-3.36,0.206587955583));+#4600=LINE('',#4592,#3603);+#4601=ORIENTED_EDGE('',*,*,#4602,.T.);+#4602=EDGE_CURVE('',#4598,#4603,#4605,.T.);+#4603=VERTEX_POINT('',#4604);+#4604=CARTESIAN_POINT('',(-3.626449047106,-3.36,5.551115123126E-17));+#4605=CIRCLE('',#4606,0.25);+#4606=AXIS2_PLACEMENT_3D('',#4607,#3612,#3613);+#4607=CARTESIAN_POINT('',(-3.626449047106,-3.36,0.25));+#4608=ORIENTED_EDGE('',*,*,#4609,.T.);+#4609=EDGE_CURVE('',#4603,#4610,#4612,.T.);+#4610=VERTEX_POINT('',#4611);+#4611=CARTESIAN_POINT('',(-4.05,-3.36,5.551115123126E-17));+#4612=LINE('',#4604,#768);+#4613=ORIENTED_EDGE('',*,*,#4614,.T.);+#4614=EDGE_CURVE('',#4610,#4615,#4617,.T.);+#4615=VERTEX_POINT('',#4616);+#4616=CARTESIAN_POINT('',(-4.05,-3.36,0.15));+#4617=LINE('',#4611,#754);+#4618=ORIENTED_EDGE('',*,*,#4619,.T.);+#4619=EDGE_CURVE('',#4615,#4620,#4622,.T.);+#4620=VERTEX_POINT('',#4621);+#4621=CARTESIAN_POINT('',(-3.626449047106,-3.36,0.15));+#4622=LINE('',#4616,#718);+#4623=ORIENTED_EDGE('',*,*,#4624,.T.);+#4624=EDGE_CURVE('',#4620,#4625,#4627,.T.);+#4625=VERTEX_POINT('',#4626);+#4626=CARTESIAN_POINT('',(-3.527968271805,-3.36,0.232635182233));+#4627=CIRCLE('',#4628,0.1);+#4628=AXIS2_PLACEMENT_3D('',#4607,#3635,#3636);+#4629=ORIENTED_EDGE('',*,*,#4630,.T.);+#4630=EDGE_CURVE('',#4625,#4631,#4633,.T.);+#4631=VERTEX_POINT('',#4632);+#4632=CARTESIAN_POINT('',(-3.496201938253,-3.36,0.443412044417));+#4633=LINE('',#4626,#3642);+#4634=ORIENTED_EDGE('',*,*,#4635,.T.);+#4635=EDGE_CURVE('',#4631,#4636,#4637,.T.);+#4636=VERTEX_POINT('',#4580);+#4637=CIRCLE('',#4638,0.25);+#4638=AXIS2_PLACEMENT_3D('',#4595,#3649,#3650);+#4639=ORIENTED_EDGE('',*,*,#4640,.T.);+#4640=EDGE_CURVE('',#4636,#1030,#4579,.T.);+#4641=PLANE('',#4642);+#4642=AXIS2_PLACEMENT_3D('',#4643,#781,#13);+#4643=CARTESIAN_POINT('',(-3.487377466565,-3.36,0.305338822795));+#4644=ADVANCED_FACE('',(#4645),#4659,.F.);+#4645=FACE_BOUND('',#4646,.F.);+#4646=EDGE_LOOP('',(#4647,#4648,#4655,#4658));+#4647=ORIENTED_EDGE('',*,*,#1053,.T.);+#4648=ORIENTED_EDGE('',*,*,#4649,.T.);+#4649=EDGE_CURVE('',#1048,#4650,#4652,.T.);+#4650=VERTEX_POINT('',#4651);+#4651=CARTESIAN_POINT('',(-3.348480775301,-3.14,0.417364817767));+#4652=CIRCLE('',#4653,0.1);+#4653=AXIS2_PLACEMENT_3D('',#4654,#3596,#3597);+#4654=CARTESIAN_POINT('',(-3.25,-3.14,0.4));+#4655=ORIENTED_EDGE('',*,*,#4656,.F.);+#4656=EDGE_CURVE('',#4591,#4650,#4657,.T.);+#4657=LINE('',#4592,#780);+#4658=ORIENTED_EDGE('',*,*,#4590,.F.);+#4659=CYLINDRICAL_SURFACE('',#4660,0.1);+#4660=AXIS2_PLACEMENT_3D('',#4595,#3673,#3597);+#4661=ADVANCED_FACE('',(#4662),#4711,.T.);+#4662=FACE_BOUND('',#4663,.T.);+#4663=EDGE_LOOP('',(#1060,#1046,#4648,#4664,#4669,#4676,#4681,#4686,#4691,#4697,#4702,#4708));+#4664=ORIENTED_EDGE('',*,*,#4665,.T.);+#4665=EDGE_CURVE('',#4650,#4666,#4668,.T.);+#4666=VERTEX_POINT('',#4667);+#4667=CARTESIAN_POINT('',(-3.380247108853,-3.14,0.206587955583));+#4668=LINE('',#4651,#3603);+#4669=ORIENTED_EDGE('',*,*,#4670,.T.);+#4670=EDGE_CURVE('',#4666,#4671,#4673,.T.);+#4671=VERTEX_POINT('',#4672);+#4672=CARTESIAN_POINT('',(-3.626449047106,-3.14,5.551115123126E-17));+#4673=CIRCLE('',#4674,0.25);+#4674=AXIS2_PLACEMENT_3D('',#4675,#3612,#3613);+#4675=CARTESIAN_POINT('',(-3.626449047106,-3.14,0.25));+#4676=ORIENTED_EDGE('',*,*,#4677,.T.);+#4677=EDGE_CURVE('',#4671,#4678,#4680,.T.);+#4678=VERTEX_POINT('',#4679);+#4679=CARTESIAN_POINT('',(-4.05,-3.14,5.551115123126E-17));+#4680=LINE('',#4672,#768);+#4681=ORIENTED_EDGE('',*,*,#4682,.T.);+#4682=EDGE_CURVE('',#4678,#4683,#4685,.T.);+#4683=VERTEX_POINT('',#4684);+#4684=CARTESIAN_POINT('',(-4.05,-3.14,0.15));+#4685=LINE('',#4679,#754);+#4686=ORIENTED_EDGE('',*,*,#4687,.T.);+#4687=EDGE_CURVE('',#4683,#4688,#4690,.T.);+#4688=VERTEX_POINT('',#4689);+#4689=CARTESIAN_POINT('',(-3.626449047106,-3.14,0.15));+#4690=LINE('',#4684,#718);+#4691=ORIENTED_EDGE('',*,*,#4692,.T.);+#4692=EDGE_CURVE('',#4688,#4693,#4695,.T.);+#4693=VERTEX_POINT('',#4694);+#4694=CARTESIAN_POINT('',(-3.527968271805,-3.14,0.232635182233));+#4695=CIRCLE('',#4696,0.1);+#4696=AXIS2_PLACEMENT_3D('',#4675,#3635,#3636);+#4697=ORIENTED_EDGE('',*,*,#4698,.T.);+#4698=EDGE_CURVE('',#4693,#4699,#4701,.T.);+#4699=VERTEX_POINT('',#4700);+#4700=CARTESIAN_POINT('',(-3.496201938253,-3.14,0.443412044417));+#4701=LINE('',#4694,#3642);+#4702=ORIENTED_EDGE('',*,*,#4703,.T.);+#4703=EDGE_CURVE('',#4699,#4704,#4706,.T.);+#4704=VERTEX_POINT('',#4705);+#4705=CARTESIAN_POINT('',(-3.25,-3.14,0.65));+#4706=CIRCLE('',#4707,0.25);+#4707=AXIS2_PLACEMENT_3D('',#4654,#3649,#3650);+#4708=ORIENTED_EDGE('',*,*,#4709,.T.);+#4709=EDGE_CURVE('',#4704,#1062,#4710,.T.);+#4710=LINE('',#4705,#718);+#4711=PLANE('',#4712);+#4712=AXIS2_PLACEMENT_3D('',#4713,#781,#13);+#4713=CARTESIAN_POINT('',(-3.487377466565,-3.14,0.305338822795));+#4714=ADVANCED_FACE('',(#4715),#724,.F.);+#4715=FACE_BOUND('',#4716,.F.);+#4716=EDGE_LOOP('',(#4717,#4718,#4722,#4723));+#4717=ORIENTED_EDGE('',*,*,#1074,.T.);+#4718=ORIENTED_EDGE('',*,*,#4719,.T.);+#4719=EDGE_CURVE('',#1069,#3085,#4720,.T.);+#4720=LINE('',#4721,#718);+#4721=CARTESIAN_POINT('',(-3.25,-2.86,0.65));+#4722=ORIENTED_EDGE('',*,*,#3084,.F.);+#4723=ORIENTED_EDGE('',*,*,#4724,.F.);+#4724=EDGE_CURVE('',#1062,#3081,#4710,.T.);+#4725=ADVANCED_FACE('',(#4726),#4782,.F.);+#4726=FACE_BOUND('',#4727,.F.);+#4727=EDGE_LOOP('',(#4728,#4729,#4730,#4737,#4742,#4749,#4754,#4759,#4764,#4770,#4775,#4780));+#4728=ORIENTED_EDGE('',*,*,#1068,.F.);+#4729=ORIENTED_EDGE('',*,*,#1079,.T.);+#4730=ORIENTED_EDGE('',*,*,#4731,.T.);+#4731=EDGE_CURVE('',#1080,#4732,#4734,.T.);+#4732=VERTEX_POINT('',#4733);+#4733=CARTESIAN_POINT('',(-3.348480775301,-2.86,0.417364817767));+#4734=CIRCLE('',#4735,0.1);+#4735=AXIS2_PLACEMENT_3D('',#4736,#3596,#3597);+#4736=CARTESIAN_POINT('',(-3.25,-2.86,0.4));+#4737=ORIENTED_EDGE('',*,*,#4738,.T.);+#4738=EDGE_CURVE('',#4732,#4739,#4741,.T.);+#4739=VERTEX_POINT('',#4740);+#4740=CARTESIAN_POINT('',(-3.380247108853,-2.86,0.206587955583));+#4741=LINE('',#4733,#3603);+#4742=ORIENTED_EDGE('',*,*,#4743,.T.);+#4743=EDGE_CURVE('',#4739,#4744,#4746,.T.);+#4744=VERTEX_POINT('',#4745);+#4745=CARTESIAN_POINT('',(-3.626449047106,-2.86,5.551115123126E-17));+#4746=CIRCLE('',#4747,0.25);+#4747=AXIS2_PLACEMENT_3D('',#4748,#3612,#3613);+#4748=CARTESIAN_POINT('',(-3.626449047106,-2.86,0.25));+#4749=ORIENTED_EDGE('',*,*,#4750,.T.);+#4750=EDGE_CURVE('',#4744,#4751,#4753,.T.);+#4751=VERTEX_POINT('',#4752);+#4752=CARTESIAN_POINT('',(-4.05,-2.86,5.551115123126E-17));+#4753=LINE('',#4745,#768);+#4754=ORIENTED_EDGE('',*,*,#4755,.T.);+#4755=EDGE_CURVE('',#4751,#4756,#4758,.T.);+#4756=VERTEX_POINT('',#4757);+#4757=CARTESIAN_POINT('',(-4.05,-2.86,0.15));+#4758=LINE('',#4752,#754);+#4759=ORIENTED_EDGE('',*,*,#4760,.T.);+#4760=EDGE_CURVE('',#4756,#4761,#4763,.T.);+#4761=VERTEX_POINT('',#4762);+#4762=CARTESIAN_POINT('',(-3.626449047106,-2.86,0.15));+#4763=LINE('',#4757,#718);+#4764=ORIENTED_EDGE('',*,*,#4765,.T.);+#4765=EDGE_CURVE('',#4761,#4766,#4768,.T.);+#4766=VERTEX_POINT('',#4767);+#4767=CARTESIAN_POINT('',(-3.527968271805,-2.86,0.232635182233));+#4768=CIRCLE('',#4769,0.1);+#4769=AXIS2_PLACEMENT_3D('',#4748,#3635,#3636);+#4770=ORIENTED_EDGE('',*,*,#4771,.T.);+#4771=EDGE_CURVE('',#4766,#4772,#4774,.T.);+#4772=VERTEX_POINT('',#4773);+#4773=CARTESIAN_POINT('',(-3.496201938253,-2.86,0.443412044417));+#4774=LINE('',#4767,#3642);+#4775=ORIENTED_EDGE('',*,*,#4776,.T.);+#4776=EDGE_CURVE('',#4772,#4777,#4778,.T.);+#4777=VERTEX_POINT('',#4721);+#4778=CIRCLE('',#4779,0.25);+#4779=AXIS2_PLACEMENT_3D('',#4736,#3649,#3650);+#4780=ORIENTED_EDGE('',*,*,#4781,.T.);+#4781=EDGE_CURVE('',#4777,#1069,#4720,.T.);+#4782=PLANE('',#4783);+#4783=AXIS2_PLACEMENT_3D('',#4784,#781,#13);+#4784=CARTESIAN_POINT('',(-3.487377466565,-2.86,0.305338822795));+#4785=ADVANCED_FACE('',(#4786),#4800,.F.);+#4786=FACE_BOUND('',#4787,.F.);+#4787=EDGE_LOOP('',(#4788,#4789,#4796,#4799));+#4788=ORIENTED_EDGE('',*,*,#1092,.T.);+#4789=ORIENTED_EDGE('',*,*,#4790,.T.);+#4790=EDGE_CURVE('',#1087,#4791,#4793,.T.);+#4791=VERTEX_POINT('',#4792);+#4792=CARTESIAN_POINT('',(-3.348480775301,-2.64,0.417364817767));+#4793=CIRCLE('',#4794,0.1);+#4794=AXIS2_PLACEMENT_3D('',#4795,#3596,#3597);+#4795=CARTESIAN_POINT('',(-3.25,-2.64,0.4));+#4796=ORIENTED_EDGE('',*,*,#4797,.F.);+#4797=EDGE_CURVE('',#4732,#4791,#4798,.T.);+#4798=LINE('',#4733,#780);+#4799=ORIENTED_EDGE('',*,*,#4731,.F.);+#4800=CYLINDRICAL_SURFACE('',#4801,0.1);+#4801=AXIS2_PLACEMENT_3D('',#4736,#3673,#3597);+#4802=ADVANCED_FACE('',(#4803),#4852,.T.);+#4803=FACE_BOUND('',#4804,.T.);+#4804=EDGE_LOOP('',(#1099,#1085,#4789,#4805,#4810,#4817,#4822,#4827,#4832,#4838,#4843,#4849));+#4805=ORIENTED_EDGE('',*,*,#4806,.T.);+#4806=EDGE_CURVE('',#4791,#4807,#4809,.T.);+#4807=VERTEX_POINT('',#4808);+#4808=CARTESIAN_POINT('',(-3.380247108853,-2.64,0.206587955583));+#4809=LINE('',#4792,#3603);+#4810=ORIENTED_EDGE('',*,*,#4811,.T.);+#4811=EDGE_CURVE('',#4807,#4812,#4814,.T.);+#4812=VERTEX_POINT('',#4813);+#4813=CARTESIAN_POINT('',(-3.626449047106,-2.64,5.551115123126E-17));+#4814=CIRCLE('',#4815,0.25);+#4815=AXIS2_PLACEMENT_3D('',#4816,#3612,#3613);+#4816=CARTESIAN_POINT('',(-3.626449047106,-2.64,0.25));+#4817=ORIENTED_EDGE('',*,*,#4818,.T.);+#4818=EDGE_CURVE('',#4812,#4819,#4821,.T.);+#4819=VERTEX_POINT('',#4820);+#4820=CARTESIAN_POINT('',(-4.05,-2.64,5.551115123126E-17));+#4821=LINE('',#4813,#768);+#4822=ORIENTED_EDGE('',*,*,#4823,.T.);+#4823=EDGE_CURVE('',#4819,#4824,#4826,.T.);+#4824=VERTEX_POINT('',#4825);+#4825=CARTESIAN_POINT('',(-4.05,-2.64,0.15));+#4826=LINE('',#4820,#754);+#4827=ORIENTED_EDGE('',*,*,#4828,.T.);+#4828=EDGE_CURVE('',#4824,#4829,#4831,.T.);+#4829=VERTEX_POINT('',#4830);+#4830=CARTESIAN_POINT('',(-3.626449047106,-2.64,0.15));+#4831=LINE('',#4825,#718);+#4832=ORIENTED_EDGE('',*,*,#4833,.T.);+#4833=EDGE_CURVE('',#4829,#4834,#4836,.T.);+#4834=VERTEX_POINT('',#4835);+#4835=CARTESIAN_POINT('',(-3.527968271805,-2.64,0.232635182233));+#4836=CIRCLE('',#4837,0.1);+#4837=AXIS2_PLACEMENT_3D('',#4816,#3635,#3636);+#4838=ORIENTED_EDGE('',*,*,#4839,.T.);+#4839=EDGE_CURVE('',#4834,#4840,#4842,.T.);+#4840=VERTEX_POINT('',#4841);+#4841=CARTESIAN_POINT('',(-3.496201938253,-2.64,0.443412044417));+#4842=LINE('',#4835,#3642);+#4843=ORIENTED_EDGE('',*,*,#4844,.T.);+#4844=EDGE_CURVE('',#4840,#4845,#4847,.T.);+#4845=VERTEX_POINT('',#4846);+#4846=CARTESIAN_POINT('',(-3.25,-2.64,0.65));+#4847=CIRCLE('',#4848,0.25);+#4848=AXIS2_PLACEMENT_3D('',#4795,#3649,#3650);+#4849=ORIENTED_EDGE('',*,*,#4850,.T.);+#4850=EDGE_CURVE('',#4845,#1101,#4851,.T.);+#4851=LINE('',#4846,#718);+#4852=PLANE('',#4853);+#4853=AXIS2_PLACEMENT_3D('',#4854,#781,#13);+#4854=CARTESIAN_POINT('',(-3.487377466565,-2.64,0.305338822795));+#4855=ADVANCED_FACE('',(#4856),#724,.F.);+#4856=FACE_BOUND('',#4857,.F.);+#4857=EDGE_LOOP('',(#4858,#4859,#4863,#4864));+#4858=ORIENTED_EDGE('',*,*,#1113,.T.);+#4859=ORIENTED_EDGE('',*,*,#4860,.T.);+#4860=EDGE_CURVE('',#1108,#3093,#4861,.T.);+#4861=LINE('',#4862,#718);+#4862=CARTESIAN_POINT('',(-3.25,-2.36,0.65));+#4863=ORIENTED_EDGE('',*,*,#3092,.F.);+#4864=ORIENTED_EDGE('',*,*,#4865,.F.);+#4865=EDGE_CURVE('',#1101,#3089,#4851,.T.);+#4866=ADVANCED_FACE('',(#4867),#4923,.F.);+#4867=FACE_BOUND('',#4868,.F.);+#4868=EDGE_LOOP('',(#4869,#4870,#4871,#4878,#4883,#4890,#4895,#4900,#4905,#4911,#4916,#4921));+#4869=ORIENTED_EDGE('',*,*,#1107,.F.);+#4870=ORIENTED_EDGE('',*,*,#1118,.T.);+#4871=ORIENTED_EDGE('',*,*,#4872,.T.);+#4872=EDGE_CURVE('',#1119,#4873,#4875,.T.);+#4873=VERTEX_POINT('',#4874);+#4874=CARTESIAN_POINT('',(-3.348480775301,-2.36,0.417364817767));+#4875=CIRCLE('',#4876,0.1);+#4876=AXIS2_PLACEMENT_3D('',#4877,#3596,#3597);+#4877=CARTESIAN_POINT('',(-3.25,-2.36,0.4));+#4878=ORIENTED_EDGE('',*,*,#4879,.T.);+#4879=EDGE_CURVE('',#4873,#4880,#4882,.T.);+#4880=VERTEX_POINT('',#4881);+#4881=CARTESIAN_POINT('',(-3.380247108853,-2.36,0.206587955583));+#4882=LINE('',#4874,#3603);+#4883=ORIENTED_EDGE('',*,*,#4884,.T.);+#4884=EDGE_CURVE('',#4880,#4885,#4887,.T.);+#4885=VERTEX_POINT('',#4886);+#4886=CARTESIAN_POINT('',(-3.626449047106,-2.36,5.551115123126E-17));+#4887=CIRCLE('',#4888,0.25);+#4888=AXIS2_PLACEMENT_3D('',#4889,#3612,#3613);+#4889=CARTESIAN_POINT('',(-3.626449047106,-2.36,0.25));+#4890=ORIENTED_EDGE('',*,*,#4891,.T.);+#4891=EDGE_CURVE('',#4885,#4892,#4894,.T.);+#4892=VERTEX_POINT('',#4893);+#4893=CARTESIAN_POINT('',(-4.05,-2.36,5.551115123126E-17));+#4894=LINE('',#4886,#768);+#4895=ORIENTED_EDGE('',*,*,#4896,.T.);+#4896=EDGE_CURVE('',#4892,#4897,#4899,.T.);+#4897=VERTEX_POINT('',#4898);+#4898=CARTESIAN_POINT('',(-4.05,-2.36,0.15));+#4899=LINE('',#4893,#754);+#4900=ORIENTED_EDGE('',*,*,#4901,.T.);+#4901=EDGE_CURVE('',#4897,#4902,#4904,.T.);+#4902=VERTEX_POINT('',#4903);+#4903=CARTESIAN_POINT('',(-3.626449047106,-2.36,0.15));+#4904=LINE('',#4898,#718);+#4905=ORIENTED_EDGE('',*,*,#4906,.T.);+#4906=EDGE_CURVE('',#4902,#4907,#4909,.T.);+#4907=VERTEX_POINT('',#4908);+#4908=CARTESIAN_POINT('',(-3.527968271805,-2.36,0.232635182233));+#4909=CIRCLE('',#4910,0.1);+#4910=AXIS2_PLACEMENT_3D('',#4889,#3635,#3636);+#4911=ORIENTED_EDGE('',*,*,#4912,.T.);+#4912=EDGE_CURVE('',#4907,#4913,#4915,.T.);+#4913=VERTEX_POINT('',#4914);+#4914=CARTESIAN_POINT('',(-3.496201938253,-2.36,0.443412044417));+#4915=LINE('',#4908,#3642);+#4916=ORIENTED_EDGE('',*,*,#4917,.T.);+#4917=EDGE_CURVE('',#4913,#4918,#4919,.T.);+#4918=VERTEX_POINT('',#4862);+#4919=CIRCLE('',#4920,0.25);+#4920=AXIS2_PLACEMENT_3D('',#4877,#3649,#3650);+#4921=ORIENTED_EDGE('',*,*,#4922,.T.);+#4922=EDGE_CURVE('',#4918,#1108,#4861,.T.);+#4923=PLANE('',#4924);+#4924=AXIS2_PLACEMENT_3D('',#4925,#781,#13);+#4925=CARTESIAN_POINT('',(-3.487377466565,-2.36,0.305338822795));+#4926=ADVANCED_FACE('',(#4927),#4941,.F.);+#4927=FACE_BOUND('',#4928,.F.);+#4928=EDGE_LOOP('',(#4929,#4930,#4937,#4940));+#4929=ORIENTED_EDGE('',*,*,#1131,.T.);+#4930=ORIENTED_EDGE('',*,*,#4931,.T.);+#4931=EDGE_CURVE('',#1126,#4932,#4934,.T.);+#4932=VERTEX_POINT('',#4933);+#4933=CARTESIAN_POINT('',(-3.348480775301,-2.14,0.417364817767));+#4934=CIRCLE('',#4935,0.1);+#4935=AXIS2_PLACEMENT_3D('',#4936,#3596,#3597);+#4936=CARTESIAN_POINT('',(-3.25,-2.14,0.4));+#4937=ORIENTED_EDGE('',*,*,#4938,.F.);+#4938=EDGE_CURVE('',#4873,#4932,#4939,.T.);+#4939=LINE('',#4874,#780);+#4940=ORIENTED_EDGE('',*,*,#4872,.F.);+#4941=CYLINDRICAL_SURFACE('',#4942,0.1);+#4942=AXIS2_PLACEMENT_3D('',#4877,#3673,#3597);+#4943=ADVANCED_FACE('',(#4944),#4993,.T.);+#4944=FACE_BOUND('',#4945,.T.);+#4945=EDGE_LOOP('',(#1138,#1124,#4930,#4946,#4951,#4958,#4963,#4968,#4973,#4979,#4984,#4990));+#4946=ORIENTED_EDGE('',*,*,#4947,.T.);+#4947=EDGE_CURVE('',#4932,#4948,#4950,.T.);+#4948=VERTEX_POINT('',#4949);+#4949=CARTESIAN_POINT('',(-3.380247108853,-2.14,0.206587955583));+#4950=LINE('',#4933,#3603);+#4951=ORIENTED_EDGE('',*,*,#4952,.T.);+#4952=EDGE_CURVE('',#4948,#4953,#4955,.T.);+#4953=VERTEX_POINT('',#4954);+#4954=CARTESIAN_POINT('',(-3.626449047106,-2.14,5.551115123126E-17));+#4955=CIRCLE('',#4956,0.25);+#4956=AXIS2_PLACEMENT_3D('',#4957,#3612,#3613);+#4957=CARTESIAN_POINT('',(-3.626449047106,-2.14,0.25));+#4958=ORIENTED_EDGE('',*,*,#4959,.T.);+#4959=EDGE_CURVE('',#4953,#4960,#4962,.T.);+#4960=VERTEX_POINT('',#4961);+#4961=CARTESIAN_POINT('',(-4.05,-2.14,5.551115123126E-17));+#4962=LINE('',#4954,#768);+#4963=ORIENTED_EDGE('',*,*,#4964,.T.);+#4964=EDGE_CURVE('',#4960,#4965,#4967,.T.);+#4965=VERTEX_POINT('',#4966);+#4966=CARTESIAN_POINT('',(-4.05,-2.14,0.15));+#4967=LINE('',#4961,#754);+#4968=ORIENTED_EDGE('',*,*,#4969,.T.);+#4969=EDGE_CURVE('',#4965,#4970,#4972,.T.);+#4970=VERTEX_POINT('',#4971);+#4971=CARTESIAN_POINT('',(-3.626449047106,-2.14,0.15));+#4972=LINE('',#4966,#718);+#4973=ORIENTED_EDGE('',*,*,#4974,.T.);+#4974=EDGE_CURVE('',#4970,#4975,#4977,.T.);+#4975=VERTEX_POINT('',#4976);+#4976=CARTESIAN_POINT('',(-3.527968271805,-2.14,0.232635182233));+#4977=CIRCLE('',#4978,0.1);+#4978=AXIS2_PLACEMENT_3D('',#4957,#3635,#3636);+#4979=ORIENTED_EDGE('',*,*,#4980,.T.);+#4980=EDGE_CURVE('',#4975,#4981,#4983,.T.);+#4981=VERTEX_POINT('',#4982);+#4982=CARTESIAN_POINT('',(-3.496201938253,-2.14,0.443412044417));+#4983=LINE('',#4976,#3642);+#4984=ORIENTED_EDGE('',*,*,#4985,.T.);+#4985=EDGE_CURVE('',#4981,#4986,#4988,.T.);+#4986=VERTEX_POINT('',#4987);+#4987=CARTESIAN_POINT('',(-3.25,-2.14,0.65));+#4988=CIRCLE('',#4989,0.25);+#4989=AXIS2_PLACEMENT_3D('',#4936,#3649,#3650);+#4990=ORIENTED_EDGE('',*,*,#4991,.T.);+#4991=EDGE_CURVE('',#4986,#1140,#4992,.T.);+#4992=LINE('',#4987,#718);+#4993=PLANE('',#4994);+#4994=AXIS2_PLACEMENT_3D('',#4995,#781,#13);+#4995=CARTESIAN_POINT('',(-3.487377466565,-2.14,0.305338822795));+#4996=ADVANCED_FACE('',(#4997),#724,.F.);+#4997=FACE_BOUND('',#4998,.F.);+#4998=EDGE_LOOP('',(#4999,#5000,#5004,#5005));+#4999=ORIENTED_EDGE('',*,*,#1152,.T.);+#5000=ORIENTED_EDGE('',*,*,#5001,.T.);+#5001=EDGE_CURVE('',#1147,#3101,#5002,.T.);+#5002=LINE('',#5003,#718);+#5003=CARTESIAN_POINT('',(-3.25,-1.86,0.65));+#5004=ORIENTED_EDGE('',*,*,#3100,.F.);+#5005=ORIENTED_EDGE('',*,*,#5006,.F.);+#5006=EDGE_CURVE('',#1140,#3097,#4992,.T.);+#5007=ADVANCED_FACE('',(#5008),#5064,.F.);+#5008=FACE_BOUND('',#5009,.F.);+#5009=EDGE_LOOP('',(#5010,#5011,#5012,#5019,#5024,#5031,#5036,#5041,#5046,#5052,#5057,#5062));+#5010=ORIENTED_EDGE('',*,*,#1146,.F.);+#5011=ORIENTED_EDGE('',*,*,#1157,.T.);+#5012=ORIENTED_EDGE('',*,*,#5013,.T.);+#5013=EDGE_CURVE('',#1158,#5014,#5016,.T.);+#5014=VERTEX_POINT('',#5015);+#5015=CARTESIAN_POINT('',(-3.348480775301,-1.86,0.417364817767));+#5016=CIRCLE('',#5017,0.1);+#5017=AXIS2_PLACEMENT_3D('',#5018,#3596,#3597);+#5018=CARTESIAN_POINT('',(-3.25,-1.86,0.4));+#5019=ORIENTED_EDGE('',*,*,#5020,.T.);+#5020=EDGE_CURVE('',#5014,#5021,#5023,.T.);+#5021=VERTEX_POINT('',#5022);+#5022=CARTESIAN_POINT('',(-3.380247108853,-1.86,0.206587955583));+#5023=LINE('',#5015,#3603);+#5024=ORIENTED_EDGE('',*,*,#5025,.T.);+#5025=EDGE_CURVE('',#5021,#5026,#5028,.T.);+#5026=VERTEX_POINT('',#5027);+#5027=CARTESIAN_POINT('',(-3.626449047106,-1.86,5.551115123126E-17));+#5028=CIRCLE('',#5029,0.25);+#5029=AXIS2_PLACEMENT_3D('',#5030,#3612,#3613);+#5030=CARTESIAN_POINT('',(-3.626449047106,-1.86,0.25));+#5031=ORIENTED_EDGE('',*,*,#5032,.T.);+#5032=EDGE_CURVE('',#5026,#5033,#5035,.T.);+#5033=VERTEX_POINT('',#5034);+#5034=CARTESIAN_POINT('',(-4.05,-1.86,5.551115123126E-17));+#5035=LINE('',#5027,#768);+#5036=ORIENTED_EDGE('',*,*,#5037,.T.);+#5037=EDGE_CURVE('',#5033,#5038,#5040,.T.);+#5038=VERTEX_POINT('',#5039);+#5039=CARTESIAN_POINT('',(-4.05,-1.86,0.15));+#5040=LINE('',#5034,#754);+#5041=ORIENTED_EDGE('',*,*,#5042,.T.);+#5042=EDGE_CURVE('',#5038,#5043,#5045,.T.);+#5043=VERTEX_POINT('',#5044);+#5044=CARTESIAN_POINT('',(-3.626449047106,-1.86,0.15));+#5045=LINE('',#5039,#718);+#5046=ORIENTED_EDGE('',*,*,#5047,.T.);+#5047=EDGE_CURVE('',#5043,#5048,#5050,.T.);+#5048=VERTEX_POINT('',#5049);+#5049=CARTESIAN_POINT('',(-3.527968271805,-1.86,0.232635182233));+#5050=CIRCLE('',#5051,0.1);+#5051=AXIS2_PLACEMENT_3D('',#5030,#3635,#3636);+#5052=ORIENTED_EDGE('',*,*,#5053,.T.);+#5053=EDGE_CURVE('',#5048,#5054,#5056,.T.);+#5054=VERTEX_POINT('',#5055);+#5055=CARTESIAN_POINT('',(-3.496201938253,-1.86,0.443412044417));+#5056=LINE('',#5049,#3642);+#5057=ORIENTED_EDGE('',*,*,#5058,.T.);+#5058=EDGE_CURVE('',#5054,#5059,#5060,.T.);+#5059=VERTEX_POINT('',#5003);+#5060=CIRCLE('',#5061,0.25);+#5061=AXIS2_PLACEMENT_3D('',#5018,#3649,#3650);+#5062=ORIENTED_EDGE('',*,*,#5063,.T.);+#5063=EDGE_CURVE('',#5059,#1147,#5002,.T.);+#5064=PLANE('',#5065);+#5065=AXIS2_PLACEMENT_3D('',#5066,#781,#13);+#5066=CARTESIAN_POINT('',(-3.487377466565,-1.86,0.305338822795));+#5067=ADVANCED_FACE('',(#5068),#5082,.F.);+#5068=FACE_BOUND('',#5069,.F.);+#5069=EDGE_LOOP('',(#5070,#5071,#5078,#5081));+#5070=ORIENTED_EDGE('',*,*,#1170,.T.);+#5071=ORIENTED_EDGE('',*,*,#5072,.T.);+#5072=EDGE_CURVE('',#1165,#5073,#5075,.T.);+#5073=VERTEX_POINT('',#5074);+#5074=CARTESIAN_POINT('',(-3.348480775301,-1.64,0.417364817767));+#5075=CIRCLE('',#5076,0.1);+#5076=AXIS2_PLACEMENT_3D('',#5077,#3596,#3597);+#5077=CARTESIAN_POINT('',(-3.25,-1.64,0.4));+#5078=ORIENTED_EDGE('',*,*,#5079,.F.);+#5079=EDGE_CURVE('',#5014,#5073,#5080,.T.);+#5080=LINE('',#5015,#780);+#5081=ORIENTED_EDGE('',*,*,#5013,.F.);+#5082=CYLINDRICAL_SURFACE('',#5083,0.1);+#5083=AXIS2_PLACEMENT_3D('',#5018,#3673,#3597);+#5084=ADVANCED_FACE('',(#5085),#5134,.T.);+#5085=FACE_BOUND('',#5086,.T.);+#5086=EDGE_LOOP('',(#1177,#1163,#5071,#5087,#5092,#5099,#5104,#5109,#5114,#5120,#5125,#5131));+#5087=ORIENTED_EDGE('',*,*,#5088,.T.);+#5088=EDGE_CURVE('',#5073,#5089,#5091,.T.);+#5089=VERTEX_POINT('',#5090);+#5090=CARTESIAN_POINT('',(-3.380247108853,-1.64,0.206587955583));+#5091=LINE('',#5074,#3603);+#5092=ORIENTED_EDGE('',*,*,#5093,.T.);+#5093=EDGE_CURVE('',#5089,#5094,#5096,.T.);+#5094=VERTEX_POINT('',#5095);+#5095=CARTESIAN_POINT('',(-3.626449047106,-1.64,5.551115123126E-17));+#5096=CIRCLE('',#5097,0.25);+#5097=AXIS2_PLACEMENT_3D('',#5098,#3612,#3613);+#5098=CARTESIAN_POINT('',(-3.626449047106,-1.64,0.25));+#5099=ORIENTED_EDGE('',*,*,#5100,.T.);+#5100=EDGE_CURVE('',#5094,#5101,#5103,.T.);+#5101=VERTEX_POINT('',#5102);+#5102=CARTESIAN_POINT('',(-4.05,-1.64,5.551115123126E-17));+#5103=LINE('',#5095,#768);+#5104=ORIENTED_EDGE('',*,*,#5105,.T.);+#5105=EDGE_CURVE('',#5101,#5106,#5108,.T.);+#5106=VERTEX_POINT('',#5107);+#5107=CARTESIAN_POINT('',(-4.05,-1.64,0.15));+#5108=LINE('',#5102,#754);+#5109=ORIENTED_EDGE('',*,*,#5110,.T.);+#5110=EDGE_CURVE('',#5106,#5111,#5113,.T.);+#5111=VERTEX_POINT('',#5112);+#5112=CARTESIAN_POINT('',(-3.626449047106,-1.64,0.15));+#5113=LINE('',#5107,#718);+#5114=ORIENTED_EDGE('',*,*,#5115,.T.);+#5115=EDGE_CURVE('',#5111,#5116,#5118,.T.);+#5116=VERTEX_POINT('',#5117);+#5117=CARTESIAN_POINT('',(-3.527968271805,-1.64,0.232635182233));+#5118=CIRCLE('',#5119,0.1);+#5119=AXIS2_PLACEMENT_3D('',#5098,#3635,#3636);+#5120=ORIENTED_EDGE('',*,*,#5121,.T.);+#5121=EDGE_CURVE('',#5116,#5122,#5124,.T.);+#5122=VERTEX_POINT('',#5123);+#5123=CARTESIAN_POINT('',(-3.496201938253,-1.64,0.443412044417));+#5124=LINE('',#5117,#3642);+#5125=ORIENTED_EDGE('',*,*,#5126,.T.);+#5126=EDGE_CURVE('',#5122,#5127,#5129,.T.);+#5127=VERTEX_POINT('',#5128);+#5128=CARTESIAN_POINT('',(-3.25,-1.64,0.65));+#5129=CIRCLE('',#5130,0.25);+#5130=AXIS2_PLACEMENT_3D('',#5077,#3649,#3650);+#5131=ORIENTED_EDGE('',*,*,#5132,.T.);+#5132=EDGE_CURVE('',#5127,#1179,#5133,.T.);+#5133=LINE('',#5128,#718);+#5134=PLANE('',#5135);+#5135=AXIS2_PLACEMENT_3D('',#5136,#781,#13);+#5136=CARTESIAN_POINT('',(-3.487377466565,-1.64,0.305338822795));+#5137=ADVANCED_FACE('',(#5138),#724,.F.);+#5138=FACE_BOUND('',#5139,.F.);+#5139=EDGE_LOOP('',(#5140,#5141,#5145,#5146));+#5140=ORIENTED_EDGE('',*,*,#1191,.T.);+#5141=ORIENTED_EDGE('',*,*,#5142,.T.);+#5142=EDGE_CURVE('',#1186,#3109,#5143,.T.);+#5143=LINE('',#5144,#718);+#5144=CARTESIAN_POINT('',(-3.25,-1.36,0.65));+#5145=ORIENTED_EDGE('',*,*,#3108,.F.);+#5146=ORIENTED_EDGE('',*,*,#5147,.F.);+#5147=EDGE_CURVE('',#1179,#3105,#5133,.T.);+#5148=ADVANCED_FACE('',(#5149),#5205,.F.);+#5149=FACE_BOUND('',#5150,.F.);+#5150=EDGE_LOOP('',(#5151,#5152,#5153,#5160,#5165,#5172,#5177,#5182,#5187,#5193,#5198,#5203));+#5151=ORIENTED_EDGE('',*,*,#1185,.F.);+#5152=ORIENTED_EDGE('',*,*,#1196,.T.);+#5153=ORIENTED_EDGE('',*,*,#5154,.T.);+#5154=EDGE_CURVE('',#1197,#5155,#5157,.T.);+#5155=VERTEX_POINT('',#5156);+#5156=CARTESIAN_POINT('',(-3.348480775301,-1.36,0.417364817767));+#5157=CIRCLE('',#5158,0.1);+#5158=AXIS2_PLACEMENT_3D('',#5159,#3596,#3597);+#5159=CARTESIAN_POINT('',(-3.25,-1.36,0.4));+#5160=ORIENTED_EDGE('',*,*,#5161,.T.);+#5161=EDGE_CURVE('',#5155,#5162,#5164,.T.);+#5162=VERTEX_POINT('',#5163);+#5163=CARTESIAN_POINT('',(-3.380247108853,-1.36,0.206587955583));+#5164=LINE('',#5156,#3603);+#5165=ORIENTED_EDGE('',*,*,#5166,.T.);+#5166=EDGE_CURVE('',#5162,#5167,#5169,.T.);+#5167=VERTEX_POINT('',#5168);+#5168=CARTESIAN_POINT('',(-3.626449047106,-1.36,5.551115123126E-17));+#5169=CIRCLE('',#5170,0.25);+#5170=AXIS2_PLACEMENT_3D('',#5171,#3612,#3613);+#5171=CARTESIAN_POINT('',(-3.626449047106,-1.36,0.25));+#5172=ORIENTED_EDGE('',*,*,#5173,.T.);+#5173=EDGE_CURVE('',#5167,#5174,#5176,.T.);+#5174=VERTEX_POINT('',#5175);+#5175=CARTESIAN_POINT('',(-4.05,-1.36,5.551115123126E-17));+#5176=LINE('',#5168,#768);+#5177=ORIENTED_EDGE('',*,*,#5178,.T.);+#5178=EDGE_CURVE('',#5174,#5179,#5181,.T.);+#5179=VERTEX_POINT('',#5180);+#5180=CARTESIAN_POINT('',(-4.05,-1.36,0.15));+#5181=LINE('',#5175,#754);+#5182=ORIENTED_EDGE('',*,*,#5183,.T.);+#5183=EDGE_CURVE('',#5179,#5184,#5186,.T.);+#5184=VERTEX_POINT('',#5185);+#5185=CARTESIAN_POINT('',(-3.626449047106,-1.36,0.15));+#5186=LINE('',#5180,#718);+#5187=ORIENTED_EDGE('',*,*,#5188,.T.);+#5188=EDGE_CURVE('',#5184,#5189,#5191,.T.);+#5189=VERTEX_POINT('',#5190);+#5190=CARTESIAN_POINT('',(-3.527968271805,-1.36,0.232635182233));+#5191=CIRCLE('',#5192,0.1);+#5192=AXIS2_PLACEMENT_3D('',#5171,#3635,#3636);+#5193=ORIENTED_EDGE('',*,*,#5194,.T.);+#5194=EDGE_CURVE('',#5189,#5195,#5197,.T.);+#5195=VERTEX_POINT('',#5196);+#5196=CARTESIAN_POINT('',(-3.496201938253,-1.36,0.443412044417));+#5197=LINE('',#5190,#3642);+#5198=ORIENTED_EDGE('',*,*,#5199,.T.);+#5199=EDGE_CURVE('',#5195,#5200,#5201,.T.);+#5200=VERTEX_POINT('',#5144);+#5201=CIRCLE('',#5202,0.25);+#5202=AXIS2_PLACEMENT_3D('',#5159,#3649,#3650);+#5203=ORIENTED_EDGE('',*,*,#5204,.T.);+#5204=EDGE_CURVE('',#5200,#1186,#5143,.T.);+#5205=PLANE('',#5206);+#5206=AXIS2_PLACEMENT_3D('',#5207,#781,#13);+#5207=CARTESIAN_POINT('',(-3.487377466565,-1.36,0.305338822795));+#5208=ADVANCED_FACE('',(#5209),#5223,.F.);+#5209=FACE_BOUND('',#5210,.F.);+#5210=EDGE_LOOP('',(#5211,#5212,#5219,#5222));+#5211=ORIENTED_EDGE('',*,*,#1209,.T.);+#5212=ORIENTED_EDGE('',*,*,#5213,.T.);+#5213=EDGE_CURVE('',#1204,#5214,#5216,.T.);+#5214=VERTEX_POINT('',#5215);+#5215=CARTESIAN_POINT('',(-3.348480775301,-1.14,0.417364817767));+#5216=CIRCLE('',#5217,0.1);+#5217=AXIS2_PLACEMENT_3D('',#5218,#3596,#3597);+#5218=CARTESIAN_POINT('',(-3.25,-1.14,0.4));+#5219=ORIENTED_EDGE('',*,*,#5220,.F.);+#5220=EDGE_CURVE('',#5155,#5214,#5221,.T.);+#5221=LINE('',#5156,#780);+#5222=ORIENTED_EDGE('',*,*,#5154,.F.);+#5223=CYLINDRICAL_SURFACE('',#5224,0.1);+#5224=AXIS2_PLACEMENT_3D('',#5159,#3673,#3597);+#5225=ADVANCED_FACE('',(#5226),#5275,.T.);+#5226=FACE_BOUND('',#5227,.T.);+#5227=EDGE_LOOP('',(#1216,#1202,#5212,#5228,#5233,#5240,#5245,#5250,#5255,#5261,#5266,#5272));+#5228=ORIENTED_EDGE('',*,*,#5229,.T.);+#5229=EDGE_CURVE('',#5214,#5230,#5232,.T.);+#5230=VERTEX_POINT('',#5231);+#5231=CARTESIAN_POINT('',(-3.380247108853,-1.14,0.206587955583));+#5232=LINE('',#5215,#3603);+#5233=ORIENTED_EDGE('',*,*,#5234,.T.);+#5234=EDGE_CURVE('',#5230,#5235,#5237,.T.);+#5235=VERTEX_POINT('',#5236);+#5236=CARTESIAN_POINT('',(-3.626449047106,-1.14,5.551115123126E-17));+#5237=CIRCLE('',#5238,0.25);+#5238=AXIS2_PLACEMENT_3D('',#5239,#3612,#3613);+#5239=CARTESIAN_POINT('',(-3.626449047106,-1.14,0.25));+#5240=ORIENTED_EDGE('',*,*,#5241,.T.);+#5241=EDGE_CURVE('',#5235,#5242,#5244,.T.);+#5242=VERTEX_POINT('',#5243);+#5243=CARTESIAN_POINT('',(-4.05,-1.14,5.551115123126E-17));+#5244=LINE('',#5236,#768);+#5245=ORIENTED_EDGE('',*,*,#5246,.T.);+#5246=EDGE_CURVE('',#5242,#5247,#5249,.T.);+#5247=VERTEX_POINT('',#5248);+#5248=CARTESIAN_POINT('',(-4.05,-1.14,0.15));+#5249=LINE('',#5243,#754);+#5250=ORIENTED_EDGE('',*,*,#5251,.T.);+#5251=EDGE_CURVE('',#5247,#5252,#5254,.T.);+#5252=VERTEX_POINT('',#5253);+#5253=CARTESIAN_POINT('',(-3.626449047106,-1.14,0.15));+#5254=LINE('',#5248,#718);+#5255=ORIENTED_EDGE('',*,*,#5256,.T.);+#5256=EDGE_CURVE('',#5252,#5257,#5259,.T.);+#5257=VERTEX_POINT('',#5258);+#5258=CARTESIAN_POINT('',(-3.527968271805,-1.14,0.232635182233));+#5259=CIRCLE('',#5260,0.1);+#5260=AXIS2_PLACEMENT_3D('',#5239,#3635,#3636);+#5261=ORIENTED_EDGE('',*,*,#5262,.T.);+#5262=EDGE_CURVE('',#5257,#5263,#5265,.T.);+#5263=VERTEX_POINT('',#5264);+#5264=CARTESIAN_POINT('',(-3.496201938253,-1.14,0.443412044417));+#5265=LINE('',#5258,#3642);+#5266=ORIENTED_EDGE('',*,*,#5267,.T.);+#5267=EDGE_CURVE('',#5263,#5268,#5270,.T.);+#5268=VERTEX_POINT('',#5269);+#5269=CARTESIAN_POINT('',(-3.25,-1.14,0.65));+#5270=CIRCLE('',#5271,0.25);+#5271=AXIS2_PLACEMENT_3D('',#5218,#3649,#3650);+#5272=ORIENTED_EDGE('',*,*,#5273,.T.);+#5273=EDGE_CURVE('',#5268,#1218,#5274,.T.);+#5274=LINE('',#5269,#718);+#5275=PLANE('',#5276);+#5276=AXIS2_PLACEMENT_3D('',#5277,#781,#13);+#5277=CARTESIAN_POINT('',(-3.487377466565,-1.14,0.305338822795));+#5278=ADVANCED_FACE('',(#5279),#724,.F.);+#5279=FACE_BOUND('',#5280,.F.);+#5280=EDGE_LOOP('',(#5281,#5282,#5286,#5287));+#5281=ORIENTED_EDGE('',*,*,#1230,.T.);+#5282=ORIENTED_EDGE('',*,*,#5283,.T.);+#5283=EDGE_CURVE('',#1225,#3117,#5284,.T.);+#5284=LINE('',#5285,#718);+#5285=CARTESIAN_POINT('',(-3.25,-0.86,0.65));+#5286=ORIENTED_EDGE('',*,*,#3116,.F.);+#5287=ORIENTED_EDGE('',*,*,#5288,.F.);+#5288=EDGE_CURVE('',#1218,#3113,#5274,.T.);+#5289=ADVANCED_FACE('',(#5290),#5346,.F.);+#5290=FACE_BOUND('',#5291,.F.);+#5291=EDGE_LOOP('',(#5292,#5293,#5294,#5301,#5306,#5313,#5318,#5323,#5328,#5334,#5339,#5344));+#5292=ORIENTED_EDGE('',*,*,#1224,.F.);+#5293=ORIENTED_EDGE('',*,*,#1235,.T.);+#5294=ORIENTED_EDGE('',*,*,#5295,.T.);+#5295=EDGE_CURVE('',#1236,#5296,#5298,.T.);+#5296=VERTEX_POINT('',#5297);+#5297=CARTESIAN_POINT('',(-3.348480775301,-0.86,0.417364817767));+#5298=CIRCLE('',#5299,0.1);+#5299=AXIS2_PLACEMENT_3D('',#5300,#3596,#3597);+#5300=CARTESIAN_POINT('',(-3.25,-0.86,0.4));+#5301=ORIENTED_EDGE('',*,*,#5302,.T.);+#5302=EDGE_CURVE('',#5296,#5303,#5305,.T.);+#5303=VERTEX_POINT('',#5304);+#5304=CARTESIAN_POINT('',(-3.380247108853,-0.86,0.206587955583));+#5305=LINE('',#5297,#3603);+#5306=ORIENTED_EDGE('',*,*,#5307,.T.);+#5307=EDGE_CURVE('',#5303,#5308,#5310,.T.);+#5308=VERTEX_POINT('',#5309);+#5309=CARTESIAN_POINT('',(-3.626449047106,-0.86,5.551115123126E-17));+#5310=CIRCLE('',#5311,0.25);+#5311=AXIS2_PLACEMENT_3D('',#5312,#3612,#3613);+#5312=CARTESIAN_POINT('',(-3.626449047106,-0.86,0.25));+#5313=ORIENTED_EDGE('',*,*,#5314,.T.);+#5314=EDGE_CURVE('',#5308,#5315,#5317,.T.);+#5315=VERTEX_POINT('',#5316);+#5316=CARTESIAN_POINT('',(-4.05,-0.86,5.551115123126E-17));+#5317=LINE('',#5309,#768);+#5318=ORIENTED_EDGE('',*,*,#5319,.T.);+#5319=EDGE_CURVE('',#5315,#5320,#5322,.T.);+#5320=VERTEX_POINT('',#5321);+#5321=CARTESIAN_POINT('',(-4.05,-0.86,0.15));+#5322=LINE('',#5316,#754);+#5323=ORIENTED_EDGE('',*,*,#5324,.T.);+#5324=EDGE_CURVE('',#5320,#5325,#5327,.T.);+#5325=VERTEX_POINT('',#5326);+#5326=CARTESIAN_POINT('',(-3.626449047106,-0.86,0.15));+#5327=LINE('',#5321,#718);+#5328=ORIENTED_EDGE('',*,*,#5329,.T.);+#5329=EDGE_CURVE('',#5325,#5330,#5332,.T.);+#5330=VERTEX_POINT('',#5331);+#5331=CARTESIAN_POINT('',(-3.527968271805,-0.86,0.232635182233));+#5332=CIRCLE('',#5333,0.1);+#5333=AXIS2_PLACEMENT_3D('',#5312,#3635,#3636);+#5334=ORIENTED_EDGE('',*,*,#5335,.T.);+#5335=EDGE_CURVE('',#5330,#5336,#5338,.T.);+#5336=VERTEX_POINT('',#5337);+#5337=CARTESIAN_POINT('',(-3.496201938253,-0.86,0.443412044417));+#5338=LINE('',#5331,#3642);+#5339=ORIENTED_EDGE('',*,*,#5340,.T.);+#5340=EDGE_CURVE('',#5336,#5341,#5342,.T.);+#5341=VERTEX_POINT('',#5285);+#5342=CIRCLE('',#5343,0.25);+#5343=AXIS2_PLACEMENT_3D('',#5300,#3649,#3650);+#5344=ORIENTED_EDGE('',*,*,#5345,.T.);+#5345=EDGE_CURVE('',#5341,#1225,#5284,.T.);+#5346=PLANE('',#5347);+#5347=AXIS2_PLACEMENT_3D('',#5348,#781,#13);+#5348=CARTESIAN_POINT('',(-3.487377466565,-0.86,0.305338822795));+#5349=ADVANCED_FACE('',(#5350),#5364,.F.);+#5350=FACE_BOUND('',#5351,.F.);+#5351=EDGE_LOOP('',(#5352,#5353,#5360,#5363));+#5352=ORIENTED_EDGE('',*,*,#1248,.T.);+#5353=ORIENTED_EDGE('',*,*,#5354,.T.);+#5354=EDGE_CURVE('',#1243,#5355,#5357,.T.);+#5355=VERTEX_POINT('',#5356);+#5356=CARTESIAN_POINT('',(-3.348480775301,-0.64,0.417364817767));+#5357=CIRCLE('',#5358,0.1);+#5358=AXIS2_PLACEMENT_3D('',#5359,#3596,#3597);+#5359=CARTESIAN_POINT('',(-3.25,-0.64,0.4));+#5360=ORIENTED_EDGE('',*,*,#5361,.F.);+#5361=EDGE_CURVE('',#5296,#5355,#5362,.T.);+#5362=LINE('',#5297,#780);+#5363=ORIENTED_EDGE('',*,*,#5295,.F.);+#5364=CYLINDRICAL_SURFACE('',#5365,0.1);+#5365=AXIS2_PLACEMENT_3D('',#5300,#3673,#3597);+#5366=ADVANCED_FACE('',(#5367),#5416,.T.);+#5367=FACE_BOUND('',#5368,.T.);+#5368=EDGE_LOOP('',(#1255,#1241,#5353,#5369,#5374,#5381,#5386,#5391,#5396,#5402,#5407,#5413));+#5369=ORIENTED_EDGE('',*,*,#5370,.T.);+#5370=EDGE_CURVE('',#5355,#5371,#5373,.T.);+#5371=VERTEX_POINT('',#5372);+#5372=CARTESIAN_POINT('',(-3.380247108853,-0.64,0.206587955583));+#5373=LINE('',#5356,#3603);+#5374=ORIENTED_EDGE('',*,*,#5375,.T.);+#5375=EDGE_CURVE('',#5371,#5376,#5378,.T.);+#5376=VERTEX_POINT('',#5377);+#5377=CARTESIAN_POINT('',(-3.626449047106,-0.64,5.551115123126E-17));+#5378=CIRCLE('',#5379,0.25);+#5379=AXIS2_PLACEMENT_3D('',#5380,#3612,#3613);+#5380=CARTESIAN_POINT('',(-3.626449047106,-0.64,0.25));+#5381=ORIENTED_EDGE('',*,*,#5382,.T.);+#5382=EDGE_CURVE('',#5376,#5383,#5385,.T.);+#5383=VERTEX_POINT('',#5384);+#5384=CARTESIAN_POINT('',(-4.05,-0.64,5.551115123126E-17));+#5385=LINE('',#5377,#768);+#5386=ORIENTED_EDGE('',*,*,#5387,.T.);+#5387=EDGE_CURVE('',#5383,#5388,#5390,.T.);+#5388=VERTEX_POINT('',#5389);+#5389=CARTESIAN_POINT('',(-4.05,-0.64,0.15));+#5390=LINE('',#5384,#754);+#5391=ORIENTED_EDGE('',*,*,#5392,.T.);+#5392=EDGE_CURVE('',#5388,#5393,#5395,.T.);+#5393=VERTEX_POINT('',#5394);+#5394=CARTESIAN_POINT('',(-3.626449047106,-0.64,0.15));+#5395=LINE('',#5389,#718);+#5396=ORIENTED_EDGE('',*,*,#5397,.T.);+#5397=EDGE_CURVE('',#5393,#5398,#5400,.T.);+#5398=VERTEX_POINT('',#5399);+#5399=CARTESIAN_POINT('',(-3.527968271805,-0.64,0.232635182233));+#5400=CIRCLE('',#5401,0.1);+#5401=AXIS2_PLACEMENT_3D('',#5380,#3635,#3636);+#5402=ORIENTED_EDGE('',*,*,#5403,.T.);+#5403=EDGE_CURVE('',#5398,#5404,#5406,.T.);+#5404=VERTEX_POINT('',#5405);+#5405=CARTESIAN_POINT('',(-3.496201938253,-0.64,0.443412044417));+#5406=LINE('',#5399,#3642);+#5407=ORIENTED_EDGE('',*,*,#5408,.T.);+#5408=EDGE_CURVE('',#5404,#5409,#5411,.T.);+#5409=VERTEX_POINT('',#5410);+#5410=CARTESIAN_POINT('',(-3.25,-0.64,0.65));+#5411=CIRCLE('',#5412,0.25);+#5412=AXIS2_PLACEMENT_3D('',#5359,#3649,#3650);+#5413=ORIENTED_EDGE('',*,*,#5414,.T.);+#5414=EDGE_CURVE('',#5409,#1257,#5415,.T.);+#5415=LINE('',#5410,#718);+#5416=PLANE('',#5417);+#5417=AXIS2_PLACEMENT_3D('',#5418,#781,#13);+#5418=CARTESIAN_POINT('',(-3.487377466565,-0.64,0.305338822795));+#5419=ADVANCED_FACE('',(#5420),#724,.F.);+#5420=FACE_BOUND('',#5421,.F.);+#5421=EDGE_LOOP('',(#5422,#5423,#5427,#5428));+#5422=ORIENTED_EDGE('',*,*,#1269,.T.);+#5423=ORIENTED_EDGE('',*,*,#5424,.T.);+#5424=EDGE_CURVE('',#1264,#3125,#5425,.T.);+#5425=LINE('',#5426,#718);+#5426=CARTESIAN_POINT('',(-3.25,-0.36,0.65));+#5427=ORIENTED_EDGE('',*,*,#3124,.F.);+#5428=ORIENTED_EDGE('',*,*,#5429,.F.);+#5429=EDGE_CURVE('',#1257,#3121,#5415,.T.);+#5430=ADVANCED_FACE('',(#5431),#5487,.F.);+#5431=FACE_BOUND('',#5432,.F.);+#5432=EDGE_LOOP('',(#5433,#5434,#5435,#5442,#5447,#5454,#5459,#5464,#5469,#5475,#5480,#5485));+#5433=ORIENTED_EDGE('',*,*,#1263,.F.);+#5434=ORIENTED_EDGE('',*,*,#1274,.T.);+#5435=ORIENTED_EDGE('',*,*,#5436,.T.);+#5436=EDGE_CURVE('',#1275,#5437,#5439,.T.);+#5437=VERTEX_POINT('',#5438);+#5438=CARTESIAN_POINT('',(-3.348480775301,-0.36,0.417364817767));+#5439=CIRCLE('',#5440,0.1);+#5440=AXIS2_PLACEMENT_3D('',#5441,#3596,#3597);+#5441=CARTESIAN_POINT('',(-3.25,-0.36,0.4));+#5442=ORIENTED_EDGE('',*,*,#5443,.T.);+#5443=EDGE_CURVE('',#5437,#5444,#5446,.T.);+#5444=VERTEX_POINT('',#5445);+#5445=CARTESIAN_POINT('',(-3.380247108853,-0.36,0.206587955583));+#5446=LINE('',#5438,#3603);+#5447=ORIENTED_EDGE('',*,*,#5448,.T.);+#5448=EDGE_CURVE('',#5444,#5449,#5451,.T.);+#5449=VERTEX_POINT('',#5450);+#5450=CARTESIAN_POINT('',(-3.626449047106,-0.36,5.551115123126E-17));+#5451=CIRCLE('',#5452,0.25);+#5452=AXIS2_PLACEMENT_3D('',#5453,#3612,#3613);+#5453=CARTESIAN_POINT('',(-3.626449047106,-0.36,0.25));+#5454=ORIENTED_EDGE('',*,*,#5455,.T.);+#5455=EDGE_CURVE('',#5449,#5456,#5458,.T.);+#5456=VERTEX_POINT('',#5457);+#5457=CARTESIAN_POINT('',(-4.05,-0.36,5.551115123126E-17));+#5458=LINE('',#5450,#768);+#5459=ORIENTED_EDGE('',*,*,#5460,.T.);+#5460=EDGE_CURVE('',#5456,#5461,#5463,.T.);+#5461=VERTEX_POINT('',#5462);+#5462=CARTESIAN_POINT('',(-4.05,-0.36,0.15));+#5463=LINE('',#5457,#754);+#5464=ORIENTED_EDGE('',*,*,#5465,.T.);+#5465=EDGE_CURVE('',#5461,#5466,#5468,.T.);+#5466=VERTEX_POINT('',#5467);+#5467=CARTESIAN_POINT('',(-3.626449047106,-0.36,0.15));+#5468=LINE('',#5462,#718);+#5469=ORIENTED_EDGE('',*,*,#5470,.T.);+#5470=EDGE_CURVE('',#5466,#5471,#5473,.T.);+#5471=VERTEX_POINT('',#5472);+#5472=CARTESIAN_POINT('',(-3.527968271805,-0.36,0.232635182233));+#5473=CIRCLE('',#5474,0.1);+#5474=AXIS2_PLACEMENT_3D('',#5453,#3635,#3636);+#5475=ORIENTED_EDGE('',*,*,#5476,.T.);+#5476=EDGE_CURVE('',#5471,#5477,#5479,.T.);+#5477=VERTEX_POINT('',#5478);+#5478=CARTESIAN_POINT('',(-3.496201938253,-0.36,0.443412044417));+#5479=LINE('',#5472,#3642);+#5480=ORIENTED_EDGE('',*,*,#5481,.T.);+#5481=EDGE_CURVE('',#5477,#5482,#5483,.T.);+#5482=VERTEX_POINT('',#5426);+#5483=CIRCLE('',#5484,0.25);+#5484=AXIS2_PLACEMENT_3D('',#5441,#3649,#3650);+#5485=ORIENTED_EDGE('',*,*,#5486,.T.);+#5486=EDGE_CURVE('',#5482,#1264,#5425,.T.);+#5487=PLANE('',#5488);+#5488=AXIS2_PLACEMENT_3D('',#5489,#781,#13);+#5489=CARTESIAN_POINT('',(-3.487377466565,-0.36,0.305338822795));+#5490=ADVANCED_FACE('',(#5491),#5505,.F.);+#5491=FACE_BOUND('',#5492,.F.);+#5492=EDGE_LOOP('',(#5493,#5494,#5501,#5504));+#5493=ORIENTED_EDGE('',*,*,#1287,.T.);+#5494=ORIENTED_EDGE('',*,*,#5495,.T.);+#5495=EDGE_CURVE('',#1282,#5496,#5498,.T.);+#5496=VERTEX_POINT('',#5497);+#5497=CARTESIAN_POINT('',(-3.348480775301,-0.14,0.417364817767));+#5498=CIRCLE('',#5499,0.1);+#5499=AXIS2_PLACEMENT_3D('',#5500,#3596,#3597);+#5500=CARTESIAN_POINT('',(-3.25,-0.14,0.4));+#5501=ORIENTED_EDGE('',*,*,#5502,.F.);+#5502=EDGE_CURVE('',#5437,#5496,#5503,.T.);+#5503=LINE('',#5438,#780);+#5504=ORIENTED_EDGE('',*,*,#5436,.F.);+#5505=CYLINDRICAL_SURFACE('',#5506,0.1);+#5506=AXIS2_PLACEMENT_3D('',#5441,#3673,#3597);+#5507=ADVANCED_FACE('',(#5508),#5557,.T.);+#5508=FACE_BOUND('',#5509,.T.);+#5509=EDGE_LOOP('',(#1294,#1280,#5494,#5510,#5515,#5522,#5527,#5532,#5537,#5543,#5548,#5554));+#5510=ORIENTED_EDGE('',*,*,#5511,.T.);+#5511=EDGE_CURVE('',#5496,#5512,#5514,.T.);+#5512=VERTEX_POINT('',#5513);+#5513=CARTESIAN_POINT('',(-3.380247108853,-0.14,0.206587955583));+#5514=LINE('',#5497,#3603);+#5515=ORIENTED_EDGE('',*,*,#5516,.T.);+#5516=EDGE_CURVE('',#5512,#5517,#5519,.T.);+#5517=VERTEX_POINT('',#5518);+#5518=CARTESIAN_POINT('',(-3.626449047106,-0.14,5.551115123126E-17));+#5519=CIRCLE('',#5520,0.25);+#5520=AXIS2_PLACEMENT_3D('',#5521,#3612,#3613);+#5521=CARTESIAN_POINT('',(-3.626449047106,-0.14,0.25));+#5522=ORIENTED_EDGE('',*,*,#5523,.T.);+#5523=EDGE_CURVE('',#5517,#5524,#5526,.T.);+#5524=VERTEX_POINT('',#5525);+#5525=CARTESIAN_POINT('',(-4.05,-0.14,5.551115123126E-17));+#5526=LINE('',#5518,#768);+#5527=ORIENTED_EDGE('',*,*,#5528,.T.);+#5528=EDGE_CURVE('',#5524,#5529,#5531,.T.);+#5529=VERTEX_POINT('',#5530);+#5530=CARTESIAN_POINT('',(-4.05,-0.14,0.15));+#5531=LINE('',#5525,#754);+#5532=ORIENTED_EDGE('',*,*,#5533,.T.);+#5533=EDGE_CURVE('',#5529,#5534,#5536,.T.);+#5534=VERTEX_POINT('',#5535);+#5535=CARTESIAN_POINT('',(-3.626449047106,-0.14,0.15));+#5536=LINE('',#5530,#718);+#5537=ORIENTED_EDGE('',*,*,#5538,.T.);+#5538=EDGE_CURVE('',#5534,#5539,#5541,.T.);+#5539=VERTEX_POINT('',#5540);+#5540=CARTESIAN_POINT('',(-3.527968271805,-0.14,0.232635182233));+#5541=CIRCLE('',#5542,0.1);+#5542=AXIS2_PLACEMENT_3D('',#5521,#3635,#3636);+#5543=ORIENTED_EDGE('',*,*,#5544,.T.);+#5544=EDGE_CURVE('',#5539,#5545,#5547,.T.);+#5545=VERTEX_POINT('',#5546);+#5546=CARTESIAN_POINT('',(-3.496201938253,-0.14,0.443412044417));+#5547=LINE('',#5540,#3642);+#5548=ORIENTED_EDGE('',*,*,#5549,.T.);+#5549=EDGE_CURVE('',#5545,#5550,#5552,.T.);+#5550=VERTEX_POINT('',#5551);+#5551=CARTESIAN_POINT('',(-3.25,-0.14,0.65));+#5552=CIRCLE('',#5553,0.25);+#5553=AXIS2_PLACEMENT_3D('',#5500,#3649,#3650);+#5554=ORIENTED_EDGE('',*,*,#5555,.T.);+#5555=EDGE_CURVE('',#5550,#1296,#5556,.T.);+#5556=LINE('',#5551,#718);+#5557=PLANE('',#5558);+#5558=AXIS2_PLACEMENT_3D('',#5559,#781,#13);+#5559=CARTESIAN_POINT('',(-3.487377466565,-0.14,0.305338822795));+#5560=ADVANCED_FACE('',(#5561),#724,.F.);+#5561=FACE_BOUND('',#5562,.F.);+#5562=EDGE_LOOP('',(#5563,#5564,#5568,#5569));+#5563=ORIENTED_EDGE('',*,*,#1308,.T.);+#5564=ORIENTED_EDGE('',*,*,#5565,.T.);+#5565=EDGE_CURVE('',#1303,#3133,#5566,.T.);+#5566=LINE('',#5567,#718);+#5567=CARTESIAN_POINT('',(-3.25,0.14,0.65));+#5568=ORIENTED_EDGE('',*,*,#3132,.F.);+#5569=ORIENTED_EDGE('',*,*,#5570,.F.);+#5570=EDGE_CURVE('',#1296,#3129,#5556,.T.);+#5571=ADVANCED_FACE('',(#5572),#5628,.F.);+#5572=FACE_BOUND('',#5573,.F.);+#5573=EDGE_LOOP('',(#5574,#5575,#5576,#5583,#5588,#5595,#5600,#5605,#5610,#5616,#5621,#5626));+#5574=ORIENTED_EDGE('',*,*,#1302,.F.);+#5575=ORIENTED_EDGE('',*,*,#1313,.T.);+#5576=ORIENTED_EDGE('',*,*,#5577,.T.);+#5577=EDGE_CURVE('',#1314,#5578,#5580,.T.);+#5578=VERTEX_POINT('',#5579);+#5579=CARTESIAN_POINT('',(-3.348480775301,0.14,0.417364817767));+#5580=CIRCLE('',#5581,0.1);+#5581=AXIS2_PLACEMENT_3D('',#5582,#3596,#3597);+#5582=CARTESIAN_POINT('',(-3.25,0.14,0.4));+#5583=ORIENTED_EDGE('',*,*,#5584,.T.);+#5584=EDGE_CURVE('',#5578,#5585,#5587,.T.);+#5585=VERTEX_POINT('',#5586);+#5586=CARTESIAN_POINT('',(-3.380247108853,0.14,0.206587955583));+#5587=LINE('',#5579,#3603);+#5588=ORIENTED_EDGE('',*,*,#5589,.T.);+#5589=EDGE_CURVE('',#5585,#5590,#5592,.T.);+#5590=VERTEX_POINT('',#5591);+#5591=CARTESIAN_POINT('',(-3.626449047106,0.14,5.551115123126E-17));+#5592=CIRCLE('',#5593,0.25);+#5593=AXIS2_PLACEMENT_3D('',#5594,#3612,#3613);+#5594=CARTESIAN_POINT('',(-3.626449047106,0.14,0.25));+#5595=ORIENTED_EDGE('',*,*,#5596,.T.);+#5596=EDGE_CURVE('',#5590,#5597,#5599,.T.);+#5597=VERTEX_POINT('',#5598);+#5598=CARTESIAN_POINT('',(-4.05,0.14,5.551115123126E-17));+#5599=LINE('',#5591,#768);+#5600=ORIENTED_EDGE('',*,*,#5601,.T.);+#5601=EDGE_CURVE('',#5597,#5602,#5604,.T.);+#5602=VERTEX_POINT('',#5603);+#5603=CARTESIAN_POINT('',(-4.05,0.14,0.15));+#5604=LINE('',#5598,#754);+#5605=ORIENTED_EDGE('',*,*,#5606,.T.);+#5606=EDGE_CURVE('',#5602,#5607,#5609,.T.);+#5607=VERTEX_POINT('',#5608);+#5608=CARTESIAN_POINT('',(-3.626449047106,0.14,0.15));+#5609=LINE('',#5603,#718);+#5610=ORIENTED_EDGE('',*,*,#5611,.T.);+#5611=EDGE_CURVE('',#5607,#5612,#5614,.T.);+#5612=VERTEX_POINT('',#5613);+#5613=CARTESIAN_POINT('',(-3.527968271805,0.14,0.232635182233));+#5614=CIRCLE('',#5615,0.1);+#5615=AXIS2_PLACEMENT_3D('',#5594,#3635,#3636);+#5616=ORIENTED_EDGE('',*,*,#5617,.T.);+#5617=EDGE_CURVE('',#5612,#5618,#5620,.T.);+#5618=VERTEX_POINT('',#5619);+#5619=CARTESIAN_POINT('',(-3.496201938253,0.14,0.443412044417));+#5620=LINE('',#5613,#3642);+#5621=ORIENTED_EDGE('',*,*,#5622,.T.);+#5622=EDGE_CURVE('',#5618,#5623,#5624,.T.);+#5623=VERTEX_POINT('',#5567);+#5624=CIRCLE('',#5625,0.25);+#5625=AXIS2_PLACEMENT_3D('',#5582,#3649,#3650);+#5626=ORIENTED_EDGE('',*,*,#5627,.T.);+#5627=EDGE_CURVE('',#5623,#1303,#5566,.T.);+#5628=PLANE('',#5629);+#5629=AXIS2_PLACEMENT_3D('',#5630,#781,#13);+#5630=CARTESIAN_POINT('',(-3.487377466565,0.14,0.305338822795));+#5631=ADVANCED_FACE('',(#5632),#5646,.F.);+#5632=FACE_BOUND('',#5633,.F.);+#5633=EDGE_LOOP('',(#5634,#5635,#5642,#5645));+#5634=ORIENTED_EDGE('',*,*,#1326,.T.);+#5635=ORIENTED_EDGE('',*,*,#5636,.T.);+#5636=EDGE_CURVE('',#1321,#5637,#5639,.T.);+#5637=VERTEX_POINT('',#5638);+#5638=CARTESIAN_POINT('',(-3.348480775301,0.36,0.417364817767));+#5639=CIRCLE('',#5640,0.1);+#5640=AXIS2_PLACEMENT_3D('',#5641,#3596,#3597);+#5641=CARTESIAN_POINT('',(-3.25,0.36,0.4));+#5642=ORIENTED_EDGE('',*,*,#5643,.F.);+#5643=EDGE_CURVE('',#5578,#5637,#5644,.T.);+#5644=LINE('',#5579,#780);+#5645=ORIENTED_EDGE('',*,*,#5577,.F.);+#5646=CYLINDRICAL_SURFACE('',#5647,0.1);+#5647=AXIS2_PLACEMENT_3D('',#5582,#3673,#3597);+#5648=ADVANCED_FACE('',(#5649),#5698,.T.);+#5649=FACE_BOUND('',#5650,.T.);+#5650=EDGE_LOOP('',(#1333,#1319,#5635,#5651,#5656,#5663,#5668,#5673,#5678,#5684,#5689,#5695));+#5651=ORIENTED_EDGE('',*,*,#5652,.T.);+#5652=EDGE_CURVE('',#5637,#5653,#5655,.T.);+#5653=VERTEX_POINT('',#5654);+#5654=CARTESIAN_POINT('',(-3.380247108853,0.36,0.206587955583));+#5655=LINE('',#5638,#3603);+#5656=ORIENTED_EDGE('',*,*,#5657,.T.);+#5657=EDGE_CURVE('',#5653,#5658,#5660,.T.);+#5658=VERTEX_POINT('',#5659);+#5659=CARTESIAN_POINT('',(-3.626449047106,0.36,5.551115123126E-17));+#5660=CIRCLE('',#5661,0.25);+#5661=AXIS2_PLACEMENT_3D('',#5662,#3612,#3613);+#5662=CARTESIAN_POINT('',(-3.626449047106,0.36,0.25));+#5663=ORIENTED_EDGE('',*,*,#5664,.T.);+#5664=EDGE_CURVE('',#5658,#5665,#5667,.T.);+#5665=VERTEX_POINT('',#5666);+#5666=CARTESIAN_POINT('',(-4.05,0.36,5.551115123126E-17));+#5667=LINE('',#5659,#768);+#5668=ORIENTED_EDGE('',*,*,#5669,.T.);+#5669=EDGE_CURVE('',#5665,#5670,#5672,.T.);+#5670=VERTEX_POINT('',#5671);+#5671=CARTESIAN_POINT('',(-4.05,0.36,0.15));+#5672=LINE('',#5666,#754);+#5673=ORIENTED_EDGE('',*,*,#5674,.T.);+#5674=EDGE_CURVE('',#5670,#5675,#5677,.T.);+#5675=VERTEX_POINT('',#5676);+#5676=CARTESIAN_POINT('',(-3.626449047106,0.36,0.15));+#5677=LINE('',#5671,#718);+#5678=ORIENTED_EDGE('',*,*,#5679,.T.);+#5679=EDGE_CURVE('',#5675,#5680,#5682,.T.);+#5680=VERTEX_POINT('',#5681);+#5681=CARTESIAN_POINT('',(-3.527968271805,0.36,0.232635182233));+#5682=CIRCLE('',#5683,0.1);+#5683=AXIS2_PLACEMENT_3D('',#5662,#3635,#3636);+#5684=ORIENTED_EDGE('',*,*,#5685,.T.);+#5685=EDGE_CURVE('',#5680,#5686,#5688,.T.);+#5686=VERTEX_POINT('',#5687);+#5687=CARTESIAN_POINT('',(-3.496201938253,0.36,0.443412044417));+#5688=LINE('',#5681,#3642);+#5689=ORIENTED_EDGE('',*,*,#5690,.T.);+#5690=EDGE_CURVE('',#5686,#5691,#5693,.T.);+#5691=VERTEX_POINT('',#5692);+#5692=CARTESIAN_POINT('',(-3.25,0.36,0.65));+#5693=CIRCLE('',#5694,0.25);+#5694=AXIS2_PLACEMENT_3D('',#5641,#3649,#3650);+#5695=ORIENTED_EDGE('',*,*,#5696,.T.);+#5696=EDGE_CURVE('',#5691,#1335,#5697,.T.);+#5697=LINE('',#5692,#718);+#5698=PLANE('',#5699);+#5699=AXIS2_PLACEMENT_3D('',#5700,#781,#13);+#5700=CARTESIAN_POINT('',(-3.487377466565,0.36,0.305338822795));+#5701=ADVANCED_FACE('',(#5702),#724,.F.);+#5702=FACE_BOUND('',#5703,.F.);+#5703=EDGE_LOOP('',(#5704,#5705,#5709,#5710));+#5704=ORIENTED_EDGE('',*,*,#1347,.T.);+#5705=ORIENTED_EDGE('',*,*,#5706,.T.);+#5706=EDGE_CURVE('',#1342,#3141,#5707,.T.);+#5707=LINE('',#5708,#718);+#5708=CARTESIAN_POINT('',(-3.25,0.64,0.65));+#5709=ORIENTED_EDGE('',*,*,#3140,.F.);+#5710=ORIENTED_EDGE('',*,*,#5711,.F.);+#5711=EDGE_CURVE('',#1335,#3137,#5697,.T.);+#5712=ADVANCED_FACE('',(#5713),#5769,.F.);+#5713=FACE_BOUND('',#5714,.F.);+#5714=EDGE_LOOP('',(#5715,#5716,#5717,#5724,#5729,#5736,#5741,#5746,#5751,#5757,#5762,#5767));+#5715=ORIENTED_EDGE('',*,*,#1341,.F.);+#5716=ORIENTED_EDGE('',*,*,#1352,.T.);+#5717=ORIENTED_EDGE('',*,*,#5718,.T.);+#5718=EDGE_CURVE('',#1353,#5719,#5721,.T.);+#5719=VERTEX_POINT('',#5720);+#5720=CARTESIAN_POINT('',(-3.348480775301,0.64,0.417364817767));+#5721=CIRCLE('',#5722,0.1);+#5722=AXIS2_PLACEMENT_3D('',#5723,#3596,#3597);+#5723=CARTESIAN_POINT('',(-3.25,0.64,0.4));+#5724=ORIENTED_EDGE('',*,*,#5725,.T.);+#5725=EDGE_CURVE('',#5719,#5726,#5728,.T.);+#5726=VERTEX_POINT('',#5727);+#5727=CARTESIAN_POINT('',(-3.380247108853,0.64,0.206587955583));+#5728=LINE('',#5720,#3603);+#5729=ORIENTED_EDGE('',*,*,#5730,.T.);+#5730=EDGE_CURVE('',#5726,#5731,#5733,.T.);+#5731=VERTEX_POINT('',#5732);+#5732=CARTESIAN_POINT('',(-3.626449047106,0.64,5.551115123126E-17));+#5733=CIRCLE('',#5734,0.25);+#5734=AXIS2_PLACEMENT_3D('',#5735,#3612,#3613);+#5735=CARTESIAN_POINT('',(-3.626449047106,0.64,0.25));+#5736=ORIENTED_EDGE('',*,*,#5737,.T.);+#5737=EDGE_CURVE('',#5731,#5738,#5740,.T.);+#5738=VERTEX_POINT('',#5739);+#5739=CARTESIAN_POINT('',(-4.05,0.64,5.551115123126E-17));+#5740=LINE('',#5732,#768);+#5741=ORIENTED_EDGE('',*,*,#5742,.T.);+#5742=EDGE_CURVE('',#5738,#5743,#5745,.T.);+#5743=VERTEX_POINT('',#5744);+#5744=CARTESIAN_POINT('',(-4.05,0.64,0.15));+#5745=LINE('',#5739,#754);+#5746=ORIENTED_EDGE('',*,*,#5747,.T.);+#5747=EDGE_CURVE('',#5743,#5748,#5750,.T.);+#5748=VERTEX_POINT('',#5749);+#5749=CARTESIAN_POINT('',(-3.626449047106,0.64,0.15));+#5750=LINE('',#5744,#718);+#5751=ORIENTED_EDGE('',*,*,#5752,.T.);+#5752=EDGE_CURVE('',#5748,#5753,#5755,.T.);+#5753=VERTEX_POINT('',#5754);+#5754=CARTESIAN_POINT('',(-3.527968271805,0.64,0.232635182233));+#5755=CIRCLE('',#5756,0.1);+#5756=AXIS2_PLACEMENT_3D('',#5735,#3635,#3636);+#5757=ORIENTED_EDGE('',*,*,#5758,.T.);+#5758=EDGE_CURVE('',#5753,#5759,#5761,.T.);+#5759=VERTEX_POINT('',#5760);+#5760=CARTESIAN_POINT('',(-3.496201938253,0.64,0.443412044417));+#5761=LINE('',#5754,#3642);+#5762=ORIENTED_EDGE('',*,*,#5763,.T.);+#5763=EDGE_CURVE('',#5759,#5764,#5765,.T.);+#5764=VERTEX_POINT('',#5708);+#5765=CIRCLE('',#5766,0.25);+#5766=AXIS2_PLACEMENT_3D('',#5723,#3649,#3650);+#5767=ORIENTED_EDGE('',*,*,#5768,.T.);+#5768=EDGE_CURVE('',#5764,#1342,#5707,.T.);+#5769=PLANE('',#5770);+#5770=AXIS2_PLACEMENT_3D('',#5771,#781,#13);+#5771=CARTESIAN_POINT('',(-3.487377466565,0.64,0.305338822795));+#5772=ADVANCED_FACE('',(#5773),#5787,.F.);+#5773=FACE_BOUND('',#5774,.F.);+#5774=EDGE_LOOP('',(#5775,#5776,#5783,#5786));+#5775=ORIENTED_EDGE('',*,*,#1365,.T.);+#5776=ORIENTED_EDGE('',*,*,#5777,.T.);+#5777=EDGE_CURVE('',#1360,#5778,#5780,.T.);+#5778=VERTEX_POINT('',#5779);+#5779=CARTESIAN_POINT('',(-3.348480775301,0.86,0.417364817767));+#5780=CIRCLE('',#5781,0.1);+#5781=AXIS2_PLACEMENT_3D('',#5782,#3596,#3597);+#5782=CARTESIAN_POINT('',(-3.25,0.86,0.4));+#5783=ORIENTED_EDGE('',*,*,#5784,.F.);+#5784=EDGE_CURVE('',#5719,#5778,#5785,.T.);+#5785=LINE('',#5720,#780);+#5786=ORIENTED_EDGE('',*,*,#5718,.F.);+#5787=CYLINDRICAL_SURFACE('',#5788,0.1);+#5788=AXIS2_PLACEMENT_3D('',#5723,#3673,#3597);+#5789=ADVANCED_FACE('',(#5790),#5839,.T.);+#5790=FACE_BOUND('',#5791,.T.);+#5791=EDGE_LOOP('',(#1372,#1358,#5776,#5792,#5797,#5804,#5809,#5814,#5819,#5825,#5830,#5836));+#5792=ORIENTED_EDGE('',*,*,#5793,.T.);+#5793=EDGE_CURVE('',#5778,#5794,#5796,.T.);+#5794=VERTEX_POINT('',#5795);+#5795=CARTESIAN_POINT('',(-3.380247108853,0.86,0.206587955583));+#5796=LINE('',#5779,#3603);+#5797=ORIENTED_EDGE('',*,*,#5798,.T.);+#5798=EDGE_CURVE('',#5794,#5799,#5801,.T.);+#5799=VERTEX_POINT('',#5800);+#5800=CARTESIAN_POINT('',(-3.626449047106,0.86,5.551115123126E-17));+#5801=CIRCLE('',#5802,0.25);+#5802=AXIS2_PLACEMENT_3D('',#5803,#3612,#3613);+#5803=CARTESIAN_POINT('',(-3.626449047106,0.86,0.25));+#5804=ORIENTED_EDGE('',*,*,#5805,.T.);+#5805=EDGE_CURVE('',#5799,#5806,#5808,.T.);+#5806=VERTEX_POINT('',#5807);+#5807=CARTESIAN_POINT('',(-4.05,0.86,5.551115123126E-17));+#5808=LINE('',#5800,#768);+#5809=ORIENTED_EDGE('',*,*,#5810,.T.);+#5810=EDGE_CURVE('',#5806,#5811,#5813,.T.);+#5811=VERTEX_POINT('',#5812);+#5812=CARTESIAN_POINT('',(-4.05,0.86,0.15));+#5813=LINE('',#5807,#754);+#5814=ORIENTED_EDGE('',*,*,#5815,.T.);+#5815=EDGE_CURVE('',#5811,#5816,#5818,.T.);+#5816=VERTEX_POINT('',#5817);+#5817=CARTESIAN_POINT('',(-3.626449047106,0.86,0.15));+#5818=LINE('',#5812,#718);+#5819=ORIENTED_EDGE('',*,*,#5820,.T.);+#5820=EDGE_CURVE('',#5816,#5821,#5823,.T.);+#5821=VERTEX_POINT('',#5822);+#5822=CARTESIAN_POINT('',(-3.527968271805,0.86,0.232635182233));+#5823=CIRCLE('',#5824,0.1);+#5824=AXIS2_PLACEMENT_3D('',#5803,#3635,#3636);+#5825=ORIENTED_EDGE('',*,*,#5826,.T.);+#5826=EDGE_CURVE('',#5821,#5827,#5829,.T.);+#5827=VERTEX_POINT('',#5828);+#5828=CARTESIAN_POINT('',(-3.496201938253,0.86,0.443412044417));+#5829=LINE('',#5822,#3642);+#5830=ORIENTED_EDGE('',*,*,#5831,.T.);+#5831=EDGE_CURVE('',#5827,#5832,#5834,.T.);+#5832=VERTEX_POINT('',#5833);+#5833=CARTESIAN_POINT('',(-3.25,0.86,0.65));+#5834=CIRCLE('',#5835,0.25);+#5835=AXIS2_PLACEMENT_3D('',#5782,#3649,#3650);+#5836=ORIENTED_EDGE('',*,*,#5837,.T.);+#5837=EDGE_CURVE('',#5832,#1374,#5838,.T.);+#5838=LINE('',#5833,#718);+#5839=PLANE('',#5840);+#5840=AXIS2_PLACEMENT_3D('',#5841,#781,#13);+#5841=CARTESIAN_POINT('',(-3.487377466565,0.86,0.305338822795));+#5842=ADVANCED_FACE('',(#5843),#724,.F.);+#5843=FACE_BOUND('',#5844,.F.);+#5844=EDGE_LOOP('',(#5845,#5846,#5850,#5851));+#5845=ORIENTED_EDGE('',*,*,#1386,.T.);+#5846=ORIENTED_EDGE('',*,*,#5847,.T.);+#5847=EDGE_CURVE('',#1381,#3149,#5848,.T.);+#5848=LINE('',#5849,#718);+#5849=CARTESIAN_POINT('',(-3.25,1.14,0.65));+#5850=ORIENTED_EDGE('',*,*,#3148,.F.);+#5851=ORIENTED_EDGE('',*,*,#5852,.F.);+#5852=EDGE_CURVE('',#1374,#3145,#5838,.T.);+#5853=ADVANCED_FACE('',(#5854),#5910,.F.);+#5854=FACE_BOUND('',#5855,.F.);+#5855=EDGE_LOOP('',(#5856,#5857,#5858,#5865,#5870,#5877,#5882,#5887,#5892,#5898,#5903,#5908));+#5856=ORIENTED_EDGE('',*,*,#1380,.F.);+#5857=ORIENTED_EDGE('',*,*,#1391,.T.);+#5858=ORIENTED_EDGE('',*,*,#5859,.T.);+#5859=EDGE_CURVE('',#1392,#5860,#5862,.T.);+#5860=VERTEX_POINT('',#5861);+#5861=CARTESIAN_POINT('',(-3.348480775301,1.14,0.417364817767));+#5862=CIRCLE('',#5863,0.1);+#5863=AXIS2_PLACEMENT_3D('',#5864,#3596,#3597);+#5864=CARTESIAN_POINT('',(-3.25,1.14,0.4));+#5865=ORIENTED_EDGE('',*,*,#5866,.T.);+#5866=EDGE_CURVE('',#5860,#5867,#5869,.T.);+#5867=VERTEX_POINT('',#5868);+#5868=CARTESIAN_POINT('',(-3.380247108853,1.14,0.206587955583));+#5869=LINE('',#5861,#3603);+#5870=ORIENTED_EDGE('',*,*,#5871,.T.);+#5871=EDGE_CURVE('',#5867,#5872,#5874,.T.);+#5872=VERTEX_POINT('',#5873);+#5873=CARTESIAN_POINT('',(-3.626449047106,1.14,5.551115123126E-17));+#5874=CIRCLE('',#5875,0.25);+#5875=AXIS2_PLACEMENT_3D('',#5876,#3612,#3613);+#5876=CARTESIAN_POINT('',(-3.626449047106,1.14,0.25));+#5877=ORIENTED_EDGE('',*,*,#5878,.T.);+#5878=EDGE_CURVE('',#5872,#5879,#5881,.T.);+#5879=VERTEX_POINT('',#5880);+#5880=CARTESIAN_POINT('',(-4.05,1.14,5.551115123126E-17));+#5881=LINE('',#5873,#768);+#5882=ORIENTED_EDGE('',*,*,#5883,.T.);+#5883=EDGE_CURVE('',#5879,#5884,#5886,.T.);+#5884=VERTEX_POINT('',#5885);+#5885=CARTESIAN_POINT('',(-4.05,1.14,0.15));+#5886=LINE('',#5880,#754);+#5887=ORIENTED_EDGE('',*,*,#5888,.T.);+#5888=EDGE_CURVE('',#5884,#5889,#5891,.T.);+#5889=VERTEX_POINT('',#5890);+#5890=CARTESIAN_POINT('',(-3.626449047106,1.14,0.15));+#5891=LINE('',#5885,#718);+#5892=ORIENTED_EDGE('',*,*,#5893,.T.);+#5893=EDGE_CURVE('',#5889,#5894,#5896,.T.);+#5894=VERTEX_POINT('',#5895);+#5895=CARTESIAN_POINT('',(-3.527968271805,1.14,0.232635182233));+#5896=CIRCLE('',#5897,0.1);+#5897=AXIS2_PLACEMENT_3D('',#5876,#3635,#3636);+#5898=ORIENTED_EDGE('',*,*,#5899,.T.);+#5899=EDGE_CURVE('',#5894,#5900,#5902,.T.);+#5900=VERTEX_POINT('',#5901);+#5901=CARTESIAN_POINT('',(-3.496201938253,1.14,0.443412044417));+#5902=LINE('',#5895,#3642);+#5903=ORIENTED_EDGE('',*,*,#5904,.T.);+#5904=EDGE_CURVE('',#5900,#5905,#5906,.T.);+#5905=VERTEX_POINT('',#5849);+#5906=CIRCLE('',#5907,0.25);+#5907=AXIS2_PLACEMENT_3D('',#5864,#3649,#3650);+#5908=ORIENTED_EDGE('',*,*,#5909,.T.);+#5909=EDGE_CURVE('',#5905,#1381,#5848,.T.);+#5910=PLANE('',#5911);+#5911=AXIS2_PLACEMENT_3D('',#5912,#781,#13);+#5912=CARTESIAN_POINT('',(-3.487377466565,1.14,0.305338822795));+#5913=ADVANCED_FACE('',(#5914),#5928,.F.);+#5914=FACE_BOUND('',#5915,.F.);+#5915=EDGE_LOOP('',(#5916,#5917,#5924,#5927));+#5916=ORIENTED_EDGE('',*,*,#1404,.T.);+#5917=ORIENTED_EDGE('',*,*,#5918,.T.);+#5918=EDGE_CURVE('',#1399,#5919,#5921,.T.);+#5919=VERTEX_POINT('',#5920);+#5920=CARTESIAN_POINT('',(-3.348480775301,1.36,0.417364817767));+#5921=CIRCLE('',#5922,0.1);+#5922=AXIS2_PLACEMENT_3D('',#5923,#3596,#3597);+#5923=CARTESIAN_POINT('',(-3.25,1.36,0.4));+#5924=ORIENTED_EDGE('',*,*,#5925,.F.);+#5925=EDGE_CURVE('',#5860,#5919,#5926,.T.);+#5926=LINE('',#5861,#780);+#5927=ORIENTED_EDGE('',*,*,#5859,.F.);+#5928=CYLINDRICAL_SURFACE('',#5929,0.1);+#5929=AXIS2_PLACEMENT_3D('',#5864,#3673,#3597);+#5930=ADVANCED_FACE('',(#5931),#5980,.T.);+#5931=FACE_BOUND('',#5932,.T.);+#5932=EDGE_LOOP('',(#1411,#1397,#5917,#5933,#5938,#5945,#5950,#5955,#5960,#5966,#5971,#5977));+#5933=ORIENTED_EDGE('',*,*,#5934,.T.);+#5934=EDGE_CURVE('',#5919,#5935,#5937,.T.);+#5935=VERTEX_POINT('',#5936);+#5936=CARTESIAN_POINT('',(-3.380247108853,1.36,0.206587955583));+#5937=LINE('',#5920,#3603);+#5938=ORIENTED_EDGE('',*,*,#5939,.T.);+#5939=EDGE_CURVE('',#5935,#5940,#5942,.T.);+#5940=VERTEX_POINT('',#5941);+#5941=CARTESIAN_POINT('',(-3.626449047106,1.36,5.551115123126E-17));+#5942=CIRCLE('',#5943,0.25);+#5943=AXIS2_PLACEMENT_3D('',#5944,#3612,#3613);+#5944=CARTESIAN_POINT('',(-3.626449047106,1.36,0.25));+#5945=ORIENTED_EDGE('',*,*,#5946,.T.);+#5946=EDGE_CURVE('',#5940,#5947,#5949,.T.);+#5947=VERTEX_POINT('',#5948);+#5948=CARTESIAN_POINT('',(-4.05,1.36,5.551115123126E-17));+#5949=LINE('',#5941,#768);+#5950=ORIENTED_EDGE('',*,*,#5951,.T.);+#5951=EDGE_CURVE('',#5947,#5952,#5954,.T.);+#5952=VERTEX_POINT('',#5953);+#5953=CARTESIAN_POINT('',(-4.05,1.36,0.15));+#5954=LINE('',#5948,#754);+#5955=ORIENTED_EDGE('',*,*,#5956,.T.);+#5956=EDGE_CURVE('',#5952,#5957,#5959,.T.);+#5957=VERTEX_POINT('',#5958);+#5958=CARTESIAN_POINT('',(-3.626449047106,1.36,0.15));+#5959=LINE('',#5953,#718);+#5960=ORIENTED_EDGE('',*,*,#5961,.T.);+#5961=EDGE_CURVE('',#5957,#5962,#5964,.T.);+#5962=VERTEX_POINT('',#5963);+#5963=CARTESIAN_POINT('',(-3.527968271805,1.36,0.232635182233));+#5964=CIRCLE('',#5965,0.1);+#5965=AXIS2_PLACEMENT_3D('',#5944,#3635,#3636);+#5966=ORIENTED_EDGE('',*,*,#5967,.T.);+#5967=EDGE_CURVE('',#5962,#5968,#5970,.T.);+#5968=VERTEX_POINT('',#5969);+#5969=CARTESIAN_POINT('',(-3.496201938253,1.36,0.443412044417));+#5970=LINE('',#5963,#3642);+#5971=ORIENTED_EDGE('',*,*,#5972,.T.);+#5972=EDGE_CURVE('',#5968,#5973,#5975,.T.);+#5973=VERTEX_POINT('',#5974);+#5974=CARTESIAN_POINT('',(-3.25,1.36,0.65));+#5975=CIRCLE('',#5976,0.25);+#5976=AXIS2_PLACEMENT_3D('',#5923,#3649,#3650);+#5977=ORIENTED_EDGE('',*,*,#5978,.T.);+#5978=EDGE_CURVE('',#5973,#1413,#5979,.T.);+#5979=LINE('',#5974,#718);+#5980=PLANE('',#5981);+#5981=AXIS2_PLACEMENT_3D('',#5982,#781,#13);+#5982=CARTESIAN_POINT('',(-3.487377466565,1.36,0.305338822795));+#5983=ADVANCED_FACE('',(#5984),#724,.F.);+#5984=FACE_BOUND('',#5985,.F.);+#5985=EDGE_LOOP('',(#5986,#5987,#5991,#5992));+#5986=ORIENTED_EDGE('',*,*,#1425,.T.);+#5987=ORIENTED_EDGE('',*,*,#5988,.T.);+#5988=EDGE_CURVE('',#1420,#3157,#5989,.T.);+#5989=LINE('',#5990,#718);+#5990=CARTESIAN_POINT('',(-3.25,1.64,0.65));+#5991=ORIENTED_EDGE('',*,*,#3156,.F.);+#5992=ORIENTED_EDGE('',*,*,#5993,.F.);+#5993=EDGE_CURVE('',#1413,#3153,#5979,.T.);+#5994=ADVANCED_FACE('',(#5995),#6051,.F.);+#5995=FACE_BOUND('',#5996,.F.);+#5996=EDGE_LOOP('',(#5997,#5998,#5999,#6006,#6011,#6018,#6023,#6028,#6033,#6039,#6044,#6049));+#5997=ORIENTED_EDGE('',*,*,#1419,.F.);+#5998=ORIENTED_EDGE('',*,*,#1430,.T.);+#5999=ORIENTED_EDGE('',*,*,#6000,.T.);+#6000=EDGE_CURVE('',#1431,#6001,#6003,.T.);+#6001=VERTEX_POINT('',#6002);+#6002=CARTESIAN_POINT('',(-3.348480775301,1.64,0.417364817767));+#6003=CIRCLE('',#6004,0.1);+#6004=AXIS2_PLACEMENT_3D('',#6005,#3596,#3597);+#6005=CARTESIAN_POINT('',(-3.25,1.64,0.4));+#6006=ORIENTED_EDGE('',*,*,#6007,.T.);+#6007=EDGE_CURVE('',#6001,#6008,#6010,.T.);+#6008=VERTEX_POINT('',#6009);+#6009=CARTESIAN_POINT('',(-3.380247108853,1.64,0.206587955583));+#6010=LINE('',#6002,#3603);+#6011=ORIENTED_EDGE('',*,*,#6012,.T.);+#6012=EDGE_CURVE('',#6008,#6013,#6015,.T.);+#6013=VERTEX_POINT('',#6014);+#6014=CARTESIAN_POINT('',(-3.626449047106,1.64,5.551115123126E-17));+#6015=CIRCLE('',#6016,0.25);+#6016=AXIS2_PLACEMENT_3D('',#6017,#3612,#3613);+#6017=CARTESIAN_POINT('',(-3.626449047106,1.64,0.25));+#6018=ORIENTED_EDGE('',*,*,#6019,.T.);+#6019=EDGE_CURVE('',#6013,#6020,#6022,.T.);+#6020=VERTEX_POINT('',#6021);+#6021=CARTESIAN_POINT('',(-4.05,1.64,5.551115123126E-17));+#6022=LINE('',#6014,#768);+#6023=ORIENTED_EDGE('',*,*,#6024,.T.);+#6024=EDGE_CURVE('',#6020,#6025,#6027,.T.);+#6025=VERTEX_POINT('',#6026);+#6026=CARTESIAN_POINT('',(-4.05,1.64,0.15));+#6027=LINE('',#6021,#754);+#6028=ORIENTED_EDGE('',*,*,#6029,.T.);+#6029=EDGE_CURVE('',#6025,#6030,#6032,.T.);+#6030=VERTEX_POINT('',#6031);+#6031=CARTESIAN_POINT('',(-3.626449047106,1.64,0.15));+#6032=LINE('',#6026,#718);+#6033=ORIENTED_EDGE('',*,*,#6034,.T.);+#6034=EDGE_CURVE('',#6030,#6035,#6037,.T.);+#6035=VERTEX_POINT('',#6036);+#6036=CARTESIAN_POINT('',(-3.527968271805,1.64,0.232635182233));+#6037=CIRCLE('',#6038,0.1);+#6038=AXIS2_PLACEMENT_3D('',#6017,#3635,#3636);+#6039=ORIENTED_EDGE('',*,*,#6040,.T.);+#6040=EDGE_CURVE('',#6035,#6041,#6043,.T.);+#6041=VERTEX_POINT('',#6042);+#6042=CARTESIAN_POINT('',(-3.496201938253,1.64,0.443412044417));+#6043=LINE('',#6036,#3642);+#6044=ORIENTED_EDGE('',*,*,#6045,.T.);+#6045=EDGE_CURVE('',#6041,#6046,#6047,.T.);+#6046=VERTEX_POINT('',#5990);+#6047=CIRCLE('',#6048,0.25);+#6048=AXIS2_PLACEMENT_3D('',#6005,#3649,#3650);+#6049=ORIENTED_EDGE('',*,*,#6050,.T.);+#6050=EDGE_CURVE('',#6046,#1420,#5989,.T.);+#6051=PLANE('',#6052);+#6052=AXIS2_PLACEMENT_3D('',#6053,#781,#13);+#6053=CARTESIAN_POINT('',(-3.487377466565,1.64,0.305338822795));+#6054=ADVANCED_FACE('',(#6055),#6069,.F.);+#6055=FACE_BOUND('',#6056,.F.);+#6056=EDGE_LOOP('',(#6057,#6058,#6065,#6068));+#6057=ORIENTED_EDGE('',*,*,#1443,.T.);+#6058=ORIENTED_EDGE('',*,*,#6059,.T.);+#6059=EDGE_CURVE('',#1438,#6060,#6062,.T.);+#6060=VERTEX_POINT('',#6061);+#6061=CARTESIAN_POINT('',(-3.348480775301,1.86,0.417364817767));+#6062=CIRCLE('',#6063,0.1);+#6063=AXIS2_PLACEMENT_3D('',#6064,#3596,#3597);+#6064=CARTESIAN_POINT('',(-3.25,1.86,0.4));+#6065=ORIENTED_EDGE('',*,*,#6066,.F.);+#6066=EDGE_CURVE('',#6001,#6060,#6067,.T.);+#6067=LINE('',#6002,#780);+#6068=ORIENTED_EDGE('',*,*,#6000,.F.);+#6069=CYLINDRICAL_SURFACE('',#6070,0.1);+#6070=AXIS2_PLACEMENT_3D('',#6005,#3673,#3597);+#6071=ADVANCED_FACE('',(#6072),#6121,.T.);+#6072=FACE_BOUND('',#6073,.T.);+#6073=EDGE_LOOP('',(#1450,#1436,#6058,#6074,#6079,#6086,#6091,#6096,#6101,#6107,#6112,#6118));+#6074=ORIENTED_EDGE('',*,*,#6075,.T.);+#6075=EDGE_CURVE('',#6060,#6076,#6078,.T.);+#6076=VERTEX_POINT('',#6077);+#6077=CARTESIAN_POINT('',(-3.380247108853,1.86,0.206587955583));+#6078=LINE('',#6061,#3603);+#6079=ORIENTED_EDGE('',*,*,#6080,.T.);+#6080=EDGE_CURVE('',#6076,#6081,#6083,.T.);+#6081=VERTEX_POINT('',#6082);+#6082=CARTESIAN_POINT('',(-3.626449047106,1.86,5.551115123126E-17));+#6083=CIRCLE('',#6084,0.25);+#6084=AXIS2_PLACEMENT_3D('',#6085,#3612,#3613);+#6085=CARTESIAN_POINT('',(-3.626449047106,1.86,0.25));+#6086=ORIENTED_EDGE('',*,*,#6087,.T.);+#6087=EDGE_CURVE('',#6081,#6088,#6090,.T.);+#6088=VERTEX_POINT('',#6089);+#6089=CARTESIAN_POINT('',(-4.05,1.86,5.551115123126E-17));+#6090=LINE('',#6082,#768);+#6091=ORIENTED_EDGE('',*,*,#6092,.T.);+#6092=EDGE_CURVE('',#6088,#6093,#6095,.T.);+#6093=VERTEX_POINT('',#6094);+#6094=CARTESIAN_POINT('',(-4.05,1.86,0.15));+#6095=LINE('',#6089,#754);+#6096=ORIENTED_EDGE('',*,*,#6097,.T.);+#6097=EDGE_CURVE('',#6093,#6098,#6100,.T.);+#6098=VERTEX_POINT('',#6099);+#6099=CARTESIAN_POINT('',(-3.626449047106,1.86,0.15));+#6100=LINE('',#6094,#718);+#6101=ORIENTED_EDGE('',*,*,#6102,.T.);+#6102=EDGE_CURVE('',#6098,#6103,#6105,.T.);+#6103=VERTEX_POINT('',#6104);+#6104=CARTESIAN_POINT('',(-3.527968271805,1.86,0.232635182233));+#6105=CIRCLE('',#6106,0.1);+#6106=AXIS2_PLACEMENT_3D('',#6085,#3635,#3636);+#6107=ORIENTED_EDGE('',*,*,#6108,.T.);+#6108=EDGE_CURVE('',#6103,#6109,#6111,.T.);+#6109=VERTEX_POINT('',#6110);+#6110=CARTESIAN_POINT('',(-3.496201938253,1.86,0.443412044417));+#6111=LINE('',#6104,#3642);+#6112=ORIENTED_EDGE('',*,*,#6113,.T.);+#6113=EDGE_CURVE('',#6109,#6114,#6116,.T.);+#6114=VERTEX_POINT('',#6115);+#6115=CARTESIAN_POINT('',(-3.25,1.86,0.65));+#6116=CIRCLE('',#6117,0.25);+#6117=AXIS2_PLACEMENT_3D('',#6064,#3649,#3650);+#6118=ORIENTED_EDGE('',*,*,#6119,.T.);+#6119=EDGE_CURVE('',#6114,#1452,#6120,.T.);+#6120=LINE('',#6115,#718);+#6121=PLANE('',#6122);+#6122=AXIS2_PLACEMENT_3D('',#6123,#781,#13);+#6123=CARTESIAN_POINT('',(-3.487377466565,1.86,0.305338822795));+#6124=ADVANCED_FACE('',(#6125),#724,.F.);+#6125=FACE_BOUND('',#6126,.F.);+#6126=EDGE_LOOP('',(#6127,#6128,#6132,#6133));+#6127=ORIENTED_EDGE('',*,*,#1464,.T.);+#6128=ORIENTED_EDGE('',*,*,#6129,.T.);+#6129=EDGE_CURVE('',#1459,#3165,#6130,.T.);+#6130=LINE('',#6131,#718);+#6131=CARTESIAN_POINT('',(-3.25,2.14,0.65));+#6132=ORIENTED_EDGE('',*,*,#3164,.F.);+#6133=ORIENTED_EDGE('',*,*,#6134,.F.);+#6134=EDGE_CURVE('',#1452,#3161,#6120,.T.);+#6135=ADVANCED_FACE('',(#6136),#6192,.F.);+#6136=FACE_BOUND('',#6137,.F.);+#6137=EDGE_LOOP('',(#6138,#6139,#6140,#6147,#6152,#6159,#6164,#6169,#6174,#6180,#6185,#6190));+#6138=ORIENTED_EDGE('',*,*,#1458,.F.);+#6139=ORIENTED_EDGE('',*,*,#1469,.T.);+#6140=ORIENTED_EDGE('',*,*,#6141,.T.);+#6141=EDGE_CURVE('',#1470,#6142,#6144,.T.);+#6142=VERTEX_POINT('',#6143);+#6143=CARTESIAN_POINT('',(-3.348480775301,2.14,0.417364817767));+#6144=CIRCLE('',#6145,0.1);+#6145=AXIS2_PLACEMENT_3D('',#6146,#3596,#3597);+#6146=CARTESIAN_POINT('',(-3.25,2.14,0.4));+#6147=ORIENTED_EDGE('',*,*,#6148,.T.);+#6148=EDGE_CURVE('',#6142,#6149,#6151,.T.);+#6149=VERTEX_POINT('',#6150);+#6150=CARTESIAN_POINT('',(-3.380247108853,2.14,0.206587955583));+#6151=LINE('',#6143,#3603);+#6152=ORIENTED_EDGE('',*,*,#6153,.T.);+#6153=EDGE_CURVE('',#6149,#6154,#6156,.T.);+#6154=VERTEX_POINT('',#6155);+#6155=CARTESIAN_POINT('',(-3.626449047106,2.14,5.551115123126E-17));+#6156=CIRCLE('',#6157,0.25);+#6157=AXIS2_PLACEMENT_3D('',#6158,#3612,#3613);+#6158=CARTESIAN_POINT('',(-3.626449047106,2.14,0.25));+#6159=ORIENTED_EDGE('',*,*,#6160,.T.);+#6160=EDGE_CURVE('',#6154,#6161,#6163,.T.);+#6161=VERTEX_POINT('',#6162);+#6162=CARTESIAN_POINT('',(-4.05,2.14,5.551115123126E-17));+#6163=LINE('',#6155,#768);+#6164=ORIENTED_EDGE('',*,*,#6165,.T.);+#6165=EDGE_CURVE('',#6161,#6166,#6168,.T.);+#6166=VERTEX_POINT('',#6167);+#6167=CARTESIAN_POINT('',(-4.05,2.14,0.15));+#6168=LINE('',#6162,#754);+#6169=ORIENTED_EDGE('',*,*,#6170,.T.);+#6170=EDGE_CURVE('',#6166,#6171,#6173,.T.);+#6171=VERTEX_POINT('',#6172);+#6172=CARTESIAN_POINT('',(-3.626449047106,2.14,0.15));+#6173=LINE('',#6167,#718);+#6174=ORIENTED_EDGE('',*,*,#6175,.T.);+#6175=EDGE_CURVE('',#6171,#6176,#6178,.T.);+#6176=VERTEX_POINT('',#6177);+#6177=CARTESIAN_POINT('',(-3.527968271805,2.14,0.232635182233));+#6178=CIRCLE('',#6179,0.1);+#6179=AXIS2_PLACEMENT_3D('',#6158,#3635,#3636);+#6180=ORIENTED_EDGE('',*,*,#6181,.T.);+#6181=EDGE_CURVE('',#6176,#6182,#6184,.T.);+#6182=VERTEX_POINT('',#6183);+#6183=CARTESIAN_POINT('',(-3.496201938253,2.14,0.443412044417));+#6184=LINE('',#6177,#3642);+#6185=ORIENTED_EDGE('',*,*,#6186,.T.);+#6186=EDGE_CURVE('',#6182,#6187,#6188,.T.);+#6187=VERTEX_POINT('',#6131);+#6188=CIRCLE('',#6189,0.25);+#6189=AXIS2_PLACEMENT_3D('',#6146,#3649,#3650);+#6190=ORIENTED_EDGE('',*,*,#6191,.T.);+#6191=EDGE_CURVE('',#6187,#1459,#6130,.T.);+#6192=PLANE('',#6193);+#6193=AXIS2_PLACEMENT_3D('',#6194,#781,#13);+#6194=CARTESIAN_POINT('',(-3.487377466565,2.14,0.305338822795));+#6195=ADVANCED_FACE('',(#6196),#6210,.F.);+#6196=FACE_BOUND('',#6197,.F.);+#6197=EDGE_LOOP('',(#6198,#6199,#6206,#6209));+#6198=ORIENTED_EDGE('',*,*,#1482,.T.);+#6199=ORIENTED_EDGE('',*,*,#6200,.T.);+#6200=EDGE_CURVE('',#1477,#6201,#6203,.T.);+#6201=VERTEX_POINT('',#6202);+#6202=CARTESIAN_POINT('',(-3.348480775301,2.36,0.417364817767));+#6203=CIRCLE('',#6204,0.1);+#6204=AXIS2_PLACEMENT_3D('',#6205,#3596,#3597);+#6205=CARTESIAN_POINT('',(-3.25,2.36,0.4));+#6206=ORIENTED_EDGE('',*,*,#6207,.F.);+#6207=EDGE_CURVE('',#6142,#6201,#6208,.T.);+#6208=LINE('',#6143,#780);+#6209=ORIENTED_EDGE('',*,*,#6141,.F.);+#6210=CYLINDRICAL_SURFACE('',#6211,0.1);+#6211=AXIS2_PLACEMENT_3D('',#6146,#3673,#3597);+#6212=ADVANCED_FACE('',(#6213),#6262,.T.);+#6213=FACE_BOUND('',#6214,.T.);+#6214=EDGE_LOOP('',(#1489,#1475,#6199,#6215,#6220,#6227,#6232,#6237,#6242,#6248,#6253,#6259));+#6215=ORIENTED_EDGE('',*,*,#6216,.T.);+#6216=EDGE_CURVE('',#6201,#6217,#6219,.T.);+#6217=VERTEX_POINT('',#6218);+#6218=CARTESIAN_POINT('',(-3.380247108853,2.36,0.206587955583));+#6219=LINE('',#6202,#3603);+#6220=ORIENTED_EDGE('',*,*,#6221,.T.);+#6221=EDGE_CURVE('',#6217,#6222,#6224,.T.);+#6222=VERTEX_POINT('',#6223);+#6223=CARTESIAN_POINT('',(-3.626449047106,2.36,5.551115123126E-17));+#6224=CIRCLE('',#6225,0.25);+#6225=AXIS2_PLACEMENT_3D('',#6226,#3612,#3613);+#6226=CARTESIAN_POINT('',(-3.626449047106,2.36,0.25));+#6227=ORIENTED_EDGE('',*,*,#6228,.T.);+#6228=EDGE_CURVE('',#6222,#6229,#6231,.T.);+#6229=VERTEX_POINT('',#6230);+#6230=CARTESIAN_POINT('',(-4.05,2.36,5.551115123126E-17));+#6231=LINE('',#6223,#768);+#6232=ORIENTED_EDGE('',*,*,#6233,.T.);+#6233=EDGE_CURVE('',#6229,#6234,#6236,.T.);+#6234=VERTEX_POINT('',#6235);+#6235=CARTESIAN_POINT('',(-4.05,2.36,0.15));+#6236=LINE('',#6230,#754);+#6237=ORIENTED_EDGE('',*,*,#6238,.T.);+#6238=EDGE_CURVE('',#6234,#6239,#6241,.T.);+#6239=VERTEX_POINT('',#6240);+#6240=CARTESIAN_POINT('',(-3.626449047106,2.36,0.15));+#6241=LINE('',#6235,#718);+#6242=ORIENTED_EDGE('',*,*,#6243,.T.);+#6243=EDGE_CURVE('',#6239,#6244,#6246,.T.);+#6244=VERTEX_POINT('',#6245);+#6245=CARTESIAN_POINT('',(-3.527968271805,2.36,0.232635182233));+#6246=CIRCLE('',#6247,0.1);+#6247=AXIS2_PLACEMENT_3D('',#6226,#3635,#3636);+#6248=ORIENTED_EDGE('',*,*,#6249,.T.);+#6249=EDGE_CURVE('',#6244,#6250,#6252,.T.);+#6250=VERTEX_POINT('',#6251);+#6251=CARTESIAN_POINT('',(-3.496201938253,2.36,0.443412044417));+#6252=LINE('',#6245,#3642);+#6253=ORIENTED_EDGE('',*,*,#6254,.T.);+#6254=EDGE_CURVE('',#6250,#6255,#6257,.T.);+#6255=VERTEX_POINT('',#6256);+#6256=CARTESIAN_POINT('',(-3.25,2.36,0.65));+#6257=CIRCLE('',#6258,0.25);+#6258=AXIS2_PLACEMENT_3D('',#6205,#3649,#3650);+#6259=ORIENTED_EDGE('',*,*,#6260,.T.);+#6260=EDGE_CURVE('',#6255,#1491,#6261,.T.);+#6261=LINE('',#6256,#718);+#6262=PLANE('',#6263);+#6263=AXIS2_PLACEMENT_3D('',#6264,#781,#13);+#6264=CARTESIAN_POINT('',(-3.487377466565,2.36,0.305338822795));+#6265=ADVANCED_FACE('',(#6266),#724,.F.);+#6266=FACE_BOUND('',#6267,.F.);+#6267=EDGE_LOOP('',(#6268,#6269,#6273,#6274));+#6268=ORIENTED_EDGE('',*,*,#1503,.T.);+#6269=ORIENTED_EDGE('',*,*,#6270,.T.);+#6270=EDGE_CURVE('',#1498,#3173,#6271,.T.);+#6271=LINE('',#6272,#718);+#6272=CARTESIAN_POINT('',(-3.25,2.64,0.65));+#6273=ORIENTED_EDGE('',*,*,#3172,.F.);+#6274=ORIENTED_EDGE('',*,*,#6275,.F.);+#6275=EDGE_CURVE('',#1491,#3169,#6261,.T.);+#6276=ADVANCED_FACE('',(#6277),#6333,.F.);+#6277=FACE_BOUND('',#6278,.F.);+#6278=EDGE_LOOP('',(#6279,#6280,#6281,#6288,#6293,#6300,#6305,#6310,#6315,#6321,#6326,#6331));+#6279=ORIENTED_EDGE('',*,*,#1497,.F.);+#6280=ORIENTED_EDGE('',*,*,#1508,.T.);+#6281=ORIENTED_EDGE('',*,*,#6282,.T.);+#6282=EDGE_CURVE('',#1509,#6283,#6285,.T.);+#6283=VERTEX_POINT('',#6284);+#6284=CARTESIAN_POINT('',(-3.348480775301,2.64,0.417364817767));+#6285=CIRCLE('',#6286,0.1);+#6286=AXIS2_PLACEMENT_3D('',#6287,#3596,#3597);+#6287=CARTESIAN_POINT('',(-3.25,2.64,0.4));+#6288=ORIENTED_EDGE('',*,*,#6289,.T.);+#6289=EDGE_CURVE('',#6283,#6290,#6292,.T.);+#6290=VERTEX_POINT('',#6291);+#6291=CARTESIAN_POINT('',(-3.380247108853,2.64,0.206587955583));+#6292=LINE('',#6284,#3603);+#6293=ORIENTED_EDGE('',*,*,#6294,.T.);+#6294=EDGE_CURVE('',#6290,#6295,#6297,.T.);+#6295=VERTEX_POINT('',#6296);+#6296=CARTESIAN_POINT('',(-3.626449047106,2.64,5.551115123126E-17));+#6297=CIRCLE('',#6298,0.25);+#6298=AXIS2_PLACEMENT_3D('',#6299,#3612,#3613);+#6299=CARTESIAN_POINT('',(-3.626449047106,2.64,0.25));+#6300=ORIENTED_EDGE('',*,*,#6301,.T.);+#6301=EDGE_CURVE('',#6295,#6302,#6304,.T.);+#6302=VERTEX_POINT('',#6303);+#6303=CARTESIAN_POINT('',(-4.05,2.64,5.551115123126E-17));+#6304=LINE('',#6296,#768);+#6305=ORIENTED_EDGE('',*,*,#6306,.T.);+#6306=EDGE_CURVE('',#6302,#6307,#6309,.T.);+#6307=VERTEX_POINT('',#6308);+#6308=CARTESIAN_POINT('',(-4.05,2.64,0.15));+#6309=LINE('',#6303,#754);+#6310=ORIENTED_EDGE('',*,*,#6311,.T.);+#6311=EDGE_CURVE('',#6307,#6312,#6314,.T.);+#6312=VERTEX_POINT('',#6313);+#6313=CARTESIAN_POINT('',(-3.626449047106,2.64,0.15));+#6314=LINE('',#6308,#718);+#6315=ORIENTED_EDGE('',*,*,#6316,.T.);+#6316=EDGE_CURVE('',#6312,#6317,#6319,.T.);+#6317=VERTEX_POINT('',#6318);+#6318=CARTESIAN_POINT('',(-3.527968271805,2.64,0.232635182233));+#6319=CIRCLE('',#6320,0.1);+#6320=AXIS2_PLACEMENT_3D('',#6299,#3635,#3636);+#6321=ORIENTED_EDGE('',*,*,#6322,.T.);+#6322=EDGE_CURVE('',#6317,#6323,#6325,.T.);+#6323=VERTEX_POINT('',#6324);+#6324=CARTESIAN_POINT('',(-3.496201938253,2.64,0.443412044417));+#6325=LINE('',#6318,#3642);+#6326=ORIENTED_EDGE('',*,*,#6327,.T.);+#6327=EDGE_CURVE('',#6323,#6328,#6329,.T.);+#6328=VERTEX_POINT('',#6272);+#6329=CIRCLE('',#6330,0.25);+#6330=AXIS2_PLACEMENT_3D('',#6287,#3649,#3650);+#6331=ORIENTED_EDGE('',*,*,#6332,.T.);+#6332=EDGE_CURVE('',#6328,#1498,#6271,.T.);+#6333=PLANE('',#6334);+#6334=AXIS2_PLACEMENT_3D('',#6335,#781,#13);+#6335=CARTESIAN_POINT('',(-3.487377466565,2.64,0.305338822795));+#6336=ADVANCED_FACE('',(#6337),#6351,.F.);+#6337=FACE_BOUND('',#6338,.F.);+#6338=EDGE_LOOP('',(#6339,#6340,#6347,#6350));+#6339=ORIENTED_EDGE('',*,*,#1521,.T.);+#6340=ORIENTED_EDGE('',*,*,#6341,.T.);+#6341=EDGE_CURVE('',#1516,#6342,#6344,.T.);+#6342=VERTEX_POINT('',#6343);+#6343=CARTESIAN_POINT('',(-3.348480775301,2.86,0.417364817767));+#6344=CIRCLE('',#6345,0.1);+#6345=AXIS2_PLACEMENT_3D('',#6346,#3596,#3597);+#6346=CARTESIAN_POINT('',(-3.25,2.86,0.4));+#6347=ORIENTED_EDGE('',*,*,#6348,.F.);+#6348=EDGE_CURVE('',#6283,#6342,#6349,.T.);+#6349=LINE('',#6284,#780);+#6350=ORIENTED_EDGE('',*,*,#6282,.F.);+#6351=CYLINDRICAL_SURFACE('',#6352,0.1);+#6352=AXIS2_PLACEMENT_3D('',#6287,#3673,#3597);+#6353=ADVANCED_FACE('',(#6354),#6403,.T.);+#6354=FACE_BOUND('',#6355,.T.);+#6355=EDGE_LOOP('',(#1528,#1514,#6340,#6356,#6361,#6368,#6373,#6378,#6383,#6389,#6394,#6400));+#6356=ORIENTED_EDGE('',*,*,#6357,.T.);+#6357=EDGE_CURVE('',#6342,#6358,#6360,.T.);+#6358=VERTEX_POINT('',#6359);+#6359=CARTESIAN_POINT('',(-3.380247108853,2.86,0.206587955583));+#6360=LINE('',#6343,#3603);+#6361=ORIENTED_EDGE('',*,*,#6362,.T.);+#6362=EDGE_CURVE('',#6358,#6363,#6365,.T.);+#6363=VERTEX_POINT('',#6364);+#6364=CARTESIAN_POINT('',(-3.626449047106,2.86,5.551115123126E-17));+#6365=CIRCLE('',#6366,0.25);+#6366=AXIS2_PLACEMENT_3D('',#6367,#3612,#3613);+#6367=CARTESIAN_POINT('',(-3.626449047106,2.86,0.25));+#6368=ORIENTED_EDGE('',*,*,#6369,.T.);+#6369=EDGE_CURVE('',#6363,#6370,#6372,.T.);+#6370=VERTEX_POINT('',#6371);+#6371=CARTESIAN_POINT('',(-4.05,2.86,5.551115123126E-17));+#6372=LINE('',#6364,#768);+#6373=ORIENTED_EDGE('',*,*,#6374,.T.);+#6374=EDGE_CURVE('',#6370,#6375,#6377,.T.);+#6375=VERTEX_POINT('',#6376);+#6376=CARTESIAN_POINT('',(-4.05,2.86,0.15));+#6377=LINE('',#6371,#754);+#6378=ORIENTED_EDGE('',*,*,#6379,.T.);+#6379=EDGE_CURVE('',#6375,#6380,#6382,.T.);+#6380=VERTEX_POINT('',#6381);+#6381=CARTESIAN_POINT('',(-3.626449047106,2.86,0.15));+#6382=LINE('',#6376,#718);+#6383=ORIENTED_EDGE('',*,*,#6384,.T.);+#6384=EDGE_CURVE('',#6380,#6385,#6387,.T.);+#6385=VERTEX_POINT('',#6386);+#6386=CARTESIAN_POINT('',(-3.527968271805,2.86,0.232635182233));+#6387=CIRCLE('',#6388,0.1);+#6388=AXIS2_PLACEMENT_3D('',#6367,#3635,#3636);+#6389=ORIENTED_EDGE('',*,*,#6390,.T.);+#6390=EDGE_CURVE('',#6385,#6391,#6393,.T.);+#6391=VERTEX_POINT('',#6392);+#6392=CARTESIAN_POINT('',(-3.496201938253,2.86,0.443412044417));+#6393=LINE('',#6386,#3642);+#6394=ORIENTED_EDGE('',*,*,#6395,.T.);+#6395=EDGE_CURVE('',#6391,#6396,#6398,.T.);+#6396=VERTEX_POINT('',#6397);+#6397=CARTESIAN_POINT('',(-3.25,2.86,0.65));+#6398=CIRCLE('',#6399,0.25);+#6399=AXIS2_PLACEMENT_3D('',#6346,#3649,#3650);+#6400=ORIENTED_EDGE('',*,*,#6401,.T.);+#6401=EDGE_CURVE('',#6396,#1530,#6402,.T.);+#6402=LINE('',#6397,#718);+#6403=PLANE('',#6404);+#6404=AXIS2_PLACEMENT_3D('',#6405,#781,#13);+#6405=CARTESIAN_POINT('',(-3.487377466565,2.86,0.305338822795));+#6406=ADVANCED_FACE('',(#6407),#724,.F.);+#6407=FACE_BOUND('',#6408,.F.);+#6408=EDGE_LOOP('',(#6409,#6410,#6414,#6415));+#6409=ORIENTED_EDGE('',*,*,#1542,.T.);+#6410=ORIENTED_EDGE('',*,*,#6411,.T.);+#6411=EDGE_CURVE('',#1537,#3181,#6412,.T.);+#6412=LINE('',#6413,#718);+#6413=CARTESIAN_POINT('',(-3.25,3.14,0.65));+#6414=ORIENTED_EDGE('',*,*,#3180,.F.);+#6415=ORIENTED_EDGE('',*,*,#6416,.F.);+#6416=EDGE_CURVE('',#1530,#3177,#6402,.T.);+#6417=ADVANCED_FACE('',(#6418),#6474,.F.);+#6418=FACE_BOUND('',#6419,.F.);+#6419=EDGE_LOOP('',(#6420,#6421,#6422,#6429,#6434,#6441,#6446,#6451,#6456,#6462,#6467,#6472));+#6420=ORIENTED_EDGE('',*,*,#1536,.F.);+#6421=ORIENTED_EDGE('',*,*,#1547,.T.);+#6422=ORIENTED_EDGE('',*,*,#6423,.T.);+#6423=EDGE_CURVE('',#1548,#6424,#6426,.T.);+#6424=VERTEX_POINT('',#6425);+#6425=CARTESIAN_POINT('',(-3.348480775301,3.14,0.417364817767));+#6426=CIRCLE('',#6427,0.1);+#6427=AXIS2_PLACEMENT_3D('',#6428,#3596,#3597);+#6428=CARTESIAN_POINT('',(-3.25,3.14,0.4));+#6429=ORIENTED_EDGE('',*,*,#6430,.T.);+#6430=EDGE_CURVE('',#6424,#6431,#6433,.T.);+#6431=VERTEX_POINT('',#6432);+#6432=CARTESIAN_POINT('',(-3.380247108853,3.14,0.206587955583));+#6433=LINE('',#6425,#3603);+#6434=ORIENTED_EDGE('',*,*,#6435,.T.);+#6435=EDGE_CURVE('',#6431,#6436,#6438,.T.);+#6436=VERTEX_POINT('',#6437);+#6437=CARTESIAN_POINT('',(-3.626449047106,3.14,5.551115123126E-17));+#6438=CIRCLE('',#6439,0.25);+#6439=AXIS2_PLACEMENT_3D('',#6440,#3612,#3613);+#6440=CARTESIAN_POINT('',(-3.626449047106,3.14,0.25));+#6441=ORIENTED_EDGE('',*,*,#6442,.T.);+#6442=EDGE_CURVE('',#6436,#6443,#6445,.T.);+#6443=VERTEX_POINT('',#6444);+#6444=CARTESIAN_POINT('',(-4.05,3.14,5.551115123126E-17));+#6445=LINE('',#6437,#768);+#6446=ORIENTED_EDGE('',*,*,#6447,.T.);+#6447=EDGE_CURVE('',#6443,#6448,#6450,.T.);+#6448=VERTEX_POINT('',#6449);+#6449=CARTESIAN_POINT('',(-4.05,3.14,0.15));+#6450=LINE('',#6444,#754);+#6451=ORIENTED_EDGE('',*,*,#6452,.T.);+#6452=EDGE_CURVE('',#6448,#6453,#6455,.T.);+#6453=VERTEX_POINT('',#6454);+#6454=CARTESIAN_POINT('',(-3.626449047106,3.14,0.15));+#6455=LINE('',#6449,#718);+#6456=ORIENTED_EDGE('',*,*,#6457,.T.);+#6457=EDGE_CURVE('',#6453,#6458,#6460,.T.);+#6458=VERTEX_POINT('',#6459);+#6459=CARTESIAN_POINT('',(-3.527968271805,3.14,0.232635182233));+#6460=CIRCLE('',#6461,0.1);+#6461=AXIS2_PLACEMENT_3D('',#6440,#3635,#3636);+#6462=ORIENTED_EDGE('',*,*,#6463,.T.);+#6463=EDGE_CURVE('',#6458,#6464,#6466,.T.);+#6464=VERTEX_POINT('',#6465);+#6465=CARTESIAN_POINT('',(-3.496201938253,3.14,0.443412044417));+#6466=LINE('',#6459,#3642);+#6467=ORIENTED_EDGE('',*,*,#6468,.T.);+#6468=EDGE_CURVE('',#6464,#6469,#6470,.T.);+#6469=VERTEX_POINT('',#6413);+#6470=CIRCLE('',#6471,0.25);+#6471=AXIS2_PLACEMENT_3D('',#6428,#3649,#3650);+#6472=ORIENTED_EDGE('',*,*,#6473,.T.);+#6473=EDGE_CURVE('',#6469,#1537,#6412,.T.);+#6474=PLANE('',#6475);+#6475=AXIS2_PLACEMENT_3D('',#6476,#781,#13);+#6476=CARTESIAN_POINT('',(-3.487377466565,3.14,0.305338822795));+#6477=ADVANCED_FACE('',(#6478),#6492,.F.);+#6478=FACE_BOUND('',#6479,.F.);+#6479=EDGE_LOOP('',(#6480,#6481,#6488,#6491));+#6480=ORIENTED_EDGE('',*,*,#1560,.T.);+#6481=ORIENTED_EDGE('',*,*,#6482,.T.);+#6482=EDGE_CURVE('',#1555,#6483,#6485,.T.);+#6483=VERTEX_POINT('',#6484);+#6484=CARTESIAN_POINT('',(-3.348480775301,3.36,0.417364817767));+#6485=CIRCLE('',#6486,0.1);+#6486=AXIS2_PLACEMENT_3D('',#6487,#3596,#3597);+#6487=CARTESIAN_POINT('',(-3.25,3.36,0.4));+#6488=ORIENTED_EDGE('',*,*,#6489,.F.);+#6489=EDGE_CURVE('',#6424,#6483,#6490,.T.);+#6490=LINE('',#6425,#780);+#6491=ORIENTED_EDGE('',*,*,#6423,.F.);+#6492=CYLINDRICAL_SURFACE('',#6493,0.1);+#6493=AXIS2_PLACEMENT_3D('',#6428,#3673,#3597);+#6494=ADVANCED_FACE('',(#6495),#6544,.T.);+#6495=FACE_BOUND('',#6496,.T.);+#6496=EDGE_LOOP('',(#1567,#1553,#6481,#6497,#6502,#6509,#6514,#6519,#6524,#6530,#6535,#6541));+#6497=ORIENTED_EDGE('',*,*,#6498,.T.);+#6498=EDGE_CURVE('',#6483,#6499,#6501,.T.);+#6499=VERTEX_POINT('',#6500);+#6500=CARTESIAN_POINT('',(-3.380247108853,3.36,0.206587955583));+#6501=LINE('',#6484,#3603);+#6502=ORIENTED_EDGE('',*,*,#6503,.T.);+#6503=EDGE_CURVE('',#6499,#6504,#6506,.T.);+#6504=VERTEX_POINT('',#6505);+#6505=CARTESIAN_POINT('',(-3.626449047106,3.36,5.551115123126E-17));+#6506=CIRCLE('',#6507,0.25);+#6507=AXIS2_PLACEMENT_3D('',#6508,#3612,#3613);+#6508=CARTESIAN_POINT('',(-3.626449047106,3.36,0.25));+#6509=ORIENTED_EDGE('',*,*,#6510,.T.);+#6510=EDGE_CURVE('',#6504,#6511,#6513,.T.);+#6511=VERTEX_POINT('',#6512);+#6512=CARTESIAN_POINT('',(-4.05,3.36,5.551115123126E-17));+#6513=LINE('',#6505,#768);+#6514=ORIENTED_EDGE('',*,*,#6515,.T.);+#6515=EDGE_CURVE('',#6511,#6516,#6518,.T.);+#6516=VERTEX_POINT('',#6517);+#6517=CARTESIAN_POINT('',(-4.05,3.36,0.15));+#6518=LINE('',#6512,#754);+#6519=ORIENTED_EDGE('',*,*,#6520,.T.);+#6520=EDGE_CURVE('',#6516,#6521,#6523,.T.);+#6521=VERTEX_POINT('',#6522);+#6522=CARTESIAN_POINT('',(-3.626449047106,3.36,0.15));+#6523=LINE('',#6517,#718);+#6524=ORIENTED_EDGE('',*,*,#6525,.T.);+#6525=EDGE_CURVE('',#6521,#6526,#6528,.T.);+#6526=VERTEX_POINT('',#6527);+#6527=CARTESIAN_POINT('',(-3.527968271805,3.36,0.232635182233));+#6528=CIRCLE('',#6529,0.1);+#6529=AXIS2_PLACEMENT_3D('',#6508,#3635,#3636);+#6530=ORIENTED_EDGE('',*,*,#6531,.T.);+#6531=EDGE_CURVE('',#6526,#6532,#6534,.T.);+#6532=VERTEX_POINT('',#6533);+#6533=CARTESIAN_POINT('',(-3.496201938253,3.36,0.443412044417));+#6534=LINE('',#6527,#3642);+#6535=ORIENTED_EDGE('',*,*,#6536,.T.);+#6536=EDGE_CURVE('',#6532,#6537,#6539,.T.);+#6537=VERTEX_POINT('',#6538);+#6538=CARTESIAN_POINT('',(-3.25,3.36,0.65));+#6539=CIRCLE('',#6540,0.25);+#6540=AXIS2_PLACEMENT_3D('',#6487,#3649,#3650);+#6541=ORIENTED_EDGE('',*,*,#6542,.T.);+#6542=EDGE_CURVE('',#6537,#1569,#6543,.T.);+#6543=LINE('',#6538,#718);+#6544=PLANE('',#6545);+#6545=AXIS2_PLACEMENT_3D('',#6546,#781,#13);+#6546=CARTESIAN_POINT('',(-3.487377466565,3.36,0.305338822795));+#6547=ADVANCED_FACE('',(#6548),#724,.F.);+#6548=FACE_BOUND('',#6549,.F.);+#6549=EDGE_LOOP('',(#6550,#6551,#6555,#6556));+#6550=ORIENTED_EDGE('',*,*,#1581,.T.);+#6551=ORIENTED_EDGE('',*,*,#6552,.T.);+#6552=EDGE_CURVE('',#1576,#3189,#6553,.T.);+#6553=LINE('',#6554,#718);+#6554=CARTESIAN_POINT('',(-3.25,3.64,0.65));+#6555=ORIENTED_EDGE('',*,*,#3188,.F.);+#6556=ORIENTED_EDGE('',*,*,#6557,.F.);+#6557=EDGE_CURVE('',#1569,#3185,#6543,.T.);+#6558=ADVANCED_FACE('',(#6559),#6615,.F.);+#6559=FACE_BOUND('',#6560,.F.);+#6560=EDGE_LOOP('',(#6561,#6562,#6563,#6570,#6575,#6582,#6587,#6592,#6597,#6603,#6608,#6613));+#6561=ORIENTED_EDGE('',*,*,#1575,.F.);+#6562=ORIENTED_EDGE('',*,*,#1586,.T.);+#6563=ORIENTED_EDGE('',*,*,#6564,.T.);+#6564=EDGE_CURVE('',#1587,#6565,#6567,.T.);+#6565=VERTEX_POINT('',#6566);+#6566=CARTESIAN_POINT('',(-3.348480775301,3.64,0.417364817767));+#6567=CIRCLE('',#6568,0.1);+#6568=AXIS2_PLACEMENT_3D('',#6569,#3596,#3597);+#6569=CARTESIAN_POINT('',(-3.25,3.64,0.4));+#6570=ORIENTED_EDGE('',*,*,#6571,.T.);+#6571=EDGE_CURVE('',#6565,#6572,#6574,.T.);+#6572=VERTEX_POINT('',#6573);+#6573=CARTESIAN_POINT('',(-3.380247108853,3.64,0.206587955583));+#6574=LINE('',#6566,#3603);+#6575=ORIENTED_EDGE('',*,*,#6576,.T.);+#6576=EDGE_CURVE('',#6572,#6577,#6579,.T.);+#6577=VERTEX_POINT('',#6578);+#6578=CARTESIAN_POINT('',(-3.626449047106,3.64,5.551115123126E-17));+#6579=CIRCLE('',#6580,0.25);+#6580=AXIS2_PLACEMENT_3D('',#6581,#3612,#3613);+#6581=CARTESIAN_POINT('',(-3.626449047106,3.64,0.25));+#6582=ORIENTED_EDGE('',*,*,#6583,.T.);+#6583=EDGE_CURVE('',#6577,#6584,#6586,.T.);+#6584=VERTEX_POINT('',#6585);+#6585=CARTESIAN_POINT('',(-4.05,3.64,5.551115123126E-17));+#6586=LINE('',#6578,#768);+#6587=ORIENTED_EDGE('',*,*,#6588,.T.);+#6588=EDGE_CURVE('',#6584,#6589,#6591,.T.);+#6589=VERTEX_POINT('',#6590);+#6590=CARTESIAN_POINT('',(-4.05,3.64,0.15));+#6591=LINE('',#6585,#754);+#6592=ORIENTED_EDGE('',*,*,#6593,.T.);+#6593=EDGE_CURVE('',#6589,#6594,#6596,.T.);+#6594=VERTEX_POINT('',#6595);+#6595=CARTESIAN_POINT('',(-3.626449047106,3.64,0.15));+#6596=LINE('',#6590,#718);+#6597=ORIENTED_EDGE('',*,*,#6598,.T.);+#6598=EDGE_CURVE('',#6594,#6599,#6601,.T.);+#6599=VERTEX_POINT('',#6600);+#6600=CARTESIAN_POINT('',(-3.527968271805,3.64,0.232635182233));+#6601=CIRCLE('',#6602,0.1);+#6602=AXIS2_PLACEMENT_3D('',#6581,#3635,#3636);+#6603=ORIENTED_EDGE('',*,*,#6604,.T.);+#6604=EDGE_CURVE('',#6599,#6605,#6607,.T.);+#6605=VERTEX_POINT('',#6606);+#6606=CARTESIAN_POINT('',(-3.496201938253,3.64,0.443412044417));+#6607=LINE('',#6600,#3642);+#6608=ORIENTED_EDGE('',*,*,#6609,.T.);+#6609=EDGE_CURVE('',#6605,#6610,#6611,.T.);+#6610=VERTEX_POINT('',#6554);+#6611=CIRCLE('',#6612,0.25);+#6612=AXIS2_PLACEMENT_3D('',#6569,#3649,#3650);+#6613=ORIENTED_EDGE('',*,*,#6614,.T.);+#6614=EDGE_CURVE('',#6610,#1576,#6553,.T.);+#6615=PLANE('',#6616);+#6616=AXIS2_PLACEMENT_3D('',#6617,#781,#13);+#6617=CARTESIAN_POINT('',(-3.487377466565,3.64,0.305338822795));+#6618=ADVANCED_FACE('',(#6619),#6633,.F.);+#6619=FACE_BOUND('',#6620,.F.);+#6620=EDGE_LOOP('',(#6621,#6622,#6629,#6632));+#6621=ORIENTED_EDGE('',*,*,#1599,.T.);+#6622=ORIENTED_EDGE('',*,*,#6623,.T.);+#6623=EDGE_CURVE('',#1594,#6624,#6626,.T.);+#6624=VERTEX_POINT('',#6625);+#6625=CARTESIAN_POINT('',(-3.348480775301,3.86,0.417364817767));+#6626=CIRCLE('',#6627,0.1);+#6627=AXIS2_PLACEMENT_3D('',#6628,#3596,#3597);+#6628=CARTESIAN_POINT('',(-3.25,3.86,0.4));+#6629=ORIENTED_EDGE('',*,*,#6630,.F.);+#6630=EDGE_CURVE('',#6565,#6624,#6631,.T.);+#6631=LINE('',#6566,#780);+#6632=ORIENTED_EDGE('',*,*,#6564,.F.);+#6633=CYLINDRICAL_SURFACE('',#6634,0.1);+#6634=AXIS2_PLACEMENT_3D('',#6569,#3673,#3597);+#6635=ADVANCED_FACE('',(#6636),#6685,.T.);+#6636=FACE_BOUND('',#6637,.T.);+#6637=EDGE_LOOP('',(#1606,#1592,#6622,#6638,#6643,#6650,#6655,#6660,#6665,#6671,#6676,#6682));+#6638=ORIENTED_EDGE('',*,*,#6639,.T.);+#6639=EDGE_CURVE('',#6624,#6640,#6642,.T.);+#6640=VERTEX_POINT('',#6641);+#6641=CARTESIAN_POINT('',(-3.380247108853,3.86,0.206587955583));+#6642=LINE('',#6625,#3603);+#6643=ORIENTED_EDGE('',*,*,#6644,.T.);+#6644=EDGE_CURVE('',#6640,#6645,#6647,.T.);+#6645=VERTEX_POINT('',#6646);+#6646=CARTESIAN_POINT('',(-3.626449047106,3.86,5.551115123126E-17));+#6647=CIRCLE('',#6648,0.25);+#6648=AXIS2_PLACEMENT_3D('',#6649,#3612,#3613);+#6649=CARTESIAN_POINT('',(-3.626449047106,3.86,0.25));+#6650=ORIENTED_EDGE('',*,*,#6651,.T.);+#6651=EDGE_CURVE('',#6645,#6652,#6654,.T.);+#6652=VERTEX_POINT('',#6653);+#6653=CARTESIAN_POINT('',(-4.05,3.86,5.551115123126E-17));+#6654=LINE('',#6646,#768);+#6655=ORIENTED_EDGE('',*,*,#6656,.T.);+#6656=EDGE_CURVE('',#6652,#6657,#6659,.T.);+#6657=VERTEX_POINT('',#6658);+#6658=CARTESIAN_POINT('',(-4.05,3.86,0.15));+#6659=LINE('',#6653,#754);+#6660=ORIENTED_EDGE('',*,*,#6661,.T.);+#6661=EDGE_CURVE('',#6657,#6662,#6664,.T.);+#6662=VERTEX_POINT('',#6663);+#6663=CARTESIAN_POINT('',(-3.626449047106,3.86,0.15));+#6664=LINE('',#6658,#718);+#6665=ORIENTED_EDGE('',*,*,#6666,.T.);+#6666=EDGE_CURVE('',#6662,#6667,#6669,.T.);+#6667=VERTEX_POINT('',#6668);+#6668=CARTESIAN_POINT('',(-3.527968271805,3.86,0.232635182233));+#6669=CIRCLE('',#6670,0.1);+#6670=AXIS2_PLACEMENT_3D('',#6649,#3635,#3636);+#6671=ORIENTED_EDGE('',*,*,#6672,.T.);+#6672=EDGE_CURVE('',#6667,#6673,#6675,.T.);+#6673=VERTEX_POINT('',#6674);+#6674=CARTESIAN_POINT('',(-3.496201938253,3.86,0.443412044417));+#6675=LINE('',#6668,#3642);+#6676=ORIENTED_EDGE('',*,*,#6677,.T.);+#6677=EDGE_CURVE('',#6673,#6678,#6680,.T.);+#6678=VERTEX_POINT('',#6679);+#6679=CARTESIAN_POINT('',(-3.25,3.86,0.65));+#6680=CIRCLE('',#6681,0.25);+#6681=AXIS2_PLACEMENT_3D('',#6628,#3649,#3650);+#6682=ORIENTED_EDGE('',*,*,#6683,.T.);+#6683=EDGE_CURVE('',#6678,#1608,#6684,.T.);+#6684=LINE('',#6679,#718);+#6685=PLANE('',#6686);+#6686=AXIS2_PLACEMENT_3D('',#6687,#781,#13);+#6687=CARTESIAN_POINT('',(-3.487377466565,3.86,0.305338822795));+#6688=ADVANCED_FACE('',(#6689),#724,.F.);+#6689=FACE_BOUND('',#6690,.F.);+#6690=EDGE_LOOP('',(#6691,#6692,#6696,#6697));+#6691=ORIENTED_EDGE('',*,*,#1620,.T.);+#6692=ORIENTED_EDGE('',*,*,#6693,.T.);+#6693=EDGE_CURVE('',#1615,#3197,#6694,.T.);+#6694=LINE('',#6695,#718);+#6695=CARTESIAN_POINT('',(-3.25,4.14,0.65));+#6696=ORIENTED_EDGE('',*,*,#3196,.F.);+#6697=ORIENTED_EDGE('',*,*,#6698,.F.);+#6698=EDGE_CURVE('',#1608,#3193,#6684,.T.);+#6699=ADVANCED_FACE('',(#6700),#6756,.F.);+#6700=FACE_BOUND('',#6701,.F.);+#6701=EDGE_LOOP('',(#6702,#6703,#6704,#6711,#6716,#6723,#6728,#6733,#6738,#6744,#6749,#6754));+#6702=ORIENTED_EDGE('',*,*,#1614,.F.);+#6703=ORIENTED_EDGE('',*,*,#1625,.T.);+#6704=ORIENTED_EDGE('',*,*,#6705,.T.);+#6705=EDGE_CURVE('',#1626,#6706,#6708,.T.);+#6706=VERTEX_POINT('',#6707);+#6707=CARTESIAN_POINT('',(-3.348480775301,4.14,0.417364817767));+#6708=CIRCLE('',#6709,0.1);+#6709=AXIS2_PLACEMENT_3D('',#6710,#3596,#3597);+#6710=CARTESIAN_POINT('',(-3.25,4.14,0.4));+#6711=ORIENTED_EDGE('',*,*,#6712,.T.);+#6712=EDGE_CURVE('',#6706,#6713,#6715,.T.);+#6713=VERTEX_POINT('',#6714);+#6714=CARTESIAN_POINT('',(-3.380247108853,4.14,0.206587955583));+#6715=LINE('',#6707,#3603);+#6716=ORIENTED_EDGE('',*,*,#6717,.T.);+#6717=EDGE_CURVE('',#6713,#6718,#6720,.T.);+#6718=VERTEX_POINT('',#6719);+#6719=CARTESIAN_POINT('',(-3.626449047106,4.14,5.551115123126E-17));+#6720=CIRCLE('',#6721,0.25);+#6721=AXIS2_PLACEMENT_3D('',#6722,#3612,#3613);+#6722=CARTESIAN_POINT('',(-3.626449047106,4.14,0.25));+#6723=ORIENTED_EDGE('',*,*,#6724,.T.);+#6724=EDGE_CURVE('',#6718,#6725,#6727,.T.);+#6725=VERTEX_POINT('',#6726);+#6726=CARTESIAN_POINT('',(-4.05,4.14,5.551115123126E-17));+#6727=LINE('',#6719,#768);+#6728=ORIENTED_EDGE('',*,*,#6729,.T.);+#6729=EDGE_CURVE('',#6725,#6730,#6732,.T.);+#6730=VERTEX_POINT('',#6731);+#6731=CARTESIAN_POINT('',(-4.05,4.14,0.15));+#6732=LINE('',#6726,#754);+#6733=ORIENTED_EDGE('',*,*,#6734,.T.);+#6734=EDGE_CURVE('',#6730,#6735,#6737,.T.);+#6735=VERTEX_POINT('',#6736);+#6736=CARTESIAN_POINT('',(-3.626449047106,4.14,0.15));+#6737=LINE('',#6731,#718);+#6738=ORIENTED_EDGE('',*,*,#6739,.T.);+#6739=EDGE_CURVE('',#6735,#6740,#6742,.T.);+#6740=VERTEX_POINT('',#6741);+#6741=CARTESIAN_POINT('',(-3.527968271805,4.14,0.232635182233));+#6742=CIRCLE('',#6743,0.1);+#6743=AXIS2_PLACEMENT_3D('',#6722,#3635,#3636);+#6744=ORIENTED_EDGE('',*,*,#6745,.T.);+#6745=EDGE_CURVE('',#6740,#6746,#6748,.T.);+#6746=VERTEX_POINT('',#6747);+#6747=CARTESIAN_POINT('',(-3.496201938253,4.14,0.443412044417));+#6748=LINE('',#6741,#3642);+#6749=ORIENTED_EDGE('',*,*,#6750,.T.);+#6750=EDGE_CURVE('',#6746,#6751,#6752,.T.);+#6751=VERTEX_POINT('',#6695);+#6752=CIRCLE('',#6753,0.25);+#6753=AXIS2_PLACEMENT_3D('',#6710,#3649,#3650);+#6754=ORIENTED_EDGE('',*,*,#6755,.T.);+#6755=EDGE_CURVE('',#6751,#1615,#6694,.T.);+#6756=PLANE('',#6757);+#6757=AXIS2_PLACEMENT_3D('',#6758,#781,#13);+#6758=CARTESIAN_POINT('',(-3.487377466565,4.14,0.305338822795));+#6759=ADVANCED_FACE('',(#6760),#6774,.F.);+#6760=FACE_BOUND('',#6761,.F.);+#6761=EDGE_LOOP('',(#6762,#6763,#6770,#6773));+#6762=ORIENTED_EDGE('',*,*,#1638,.T.);+#6763=ORIENTED_EDGE('',*,*,#6764,.T.);+#6764=EDGE_CURVE('',#1633,#6765,#6767,.T.);+#6765=VERTEX_POINT('',#6766);+#6766=CARTESIAN_POINT('',(-3.348480775301,4.36,0.417364817767));+#6767=CIRCLE('',#6768,0.1);+#6768=AXIS2_PLACEMENT_3D('',#6769,#3596,#3597);+#6769=CARTESIAN_POINT('',(-3.25,4.36,0.4));+#6770=ORIENTED_EDGE('',*,*,#6771,.F.);+#6771=EDGE_CURVE('',#6706,#6765,#6772,.T.);+#6772=LINE('',#6707,#780);+#6773=ORIENTED_EDGE('',*,*,#6705,.F.);+#6774=CYLINDRICAL_SURFACE('',#6775,0.1);+#6775=AXIS2_PLACEMENT_3D('',#6710,#3673,#3597);+#6776=ADVANCED_FACE('',(#6777),#6826,.T.);+#6777=FACE_BOUND('',#6778,.T.);+#6778=EDGE_LOOP('',(#1645,#1631,#6763,#6779,#6784,#6791,#6796,#6801,#6806,#6812,#6817,#6823));+#6779=ORIENTED_EDGE('',*,*,#6780,.T.);+#6780=EDGE_CURVE('',#6765,#6781,#6783,.T.);+#6781=VERTEX_POINT('',#6782);+#6782=CARTESIAN_POINT('',(-3.380247108853,4.36,0.206587955583));+#6783=LINE('',#6766,#3603);+#6784=ORIENTED_EDGE('',*,*,#6785,.T.);+#6785=EDGE_CURVE('',#6781,#6786,#6788,.T.);+#6786=VERTEX_POINT('',#6787);+#6787=CARTESIAN_POINT('',(-3.626449047106,4.36,5.551115123126E-17));+#6788=CIRCLE('',#6789,0.25);+#6789=AXIS2_PLACEMENT_3D('',#6790,#3612,#3613);+#6790=CARTESIAN_POINT('',(-3.626449047106,4.36,0.25));+#6791=ORIENTED_EDGE('',*,*,#6792,.T.);+#6792=EDGE_CURVE('',#6786,#6793,#6795,.T.);+#6793=VERTEX_POINT('',#6794);+#6794=CARTESIAN_POINT('',(-4.05,4.36,5.551115123126E-17));+#6795=LINE('',#6787,#768);+#6796=ORIENTED_EDGE('',*,*,#6797,.T.);+#6797=EDGE_CURVE('',#6793,#6798,#6800,.T.);+#6798=VERTEX_POINT('',#6799);+#6799=CARTESIAN_POINT('',(-4.05,4.36,0.15));+#6800=LINE('',#6794,#754);+#6801=ORIENTED_EDGE('',*,*,#6802,.T.);+#6802=EDGE_CURVE('',#6798,#6803,#6805,.T.);+#6803=VERTEX_POINT('',#6804);+#6804=CARTESIAN_POINT('',(-3.626449047106,4.36,0.15));+#6805=LINE('',#6799,#718);+#6806=ORIENTED_EDGE('',*,*,#6807,.T.);+#6807=EDGE_CURVE('',#6803,#6808,#6810,.T.);+#6808=VERTEX_POINT('',#6809);+#6809=CARTESIAN_POINT('',(-3.527968271805,4.36,0.232635182233));+#6810=CIRCLE('',#6811,0.1);+#6811=AXIS2_PLACEMENT_3D('',#6790,#3635,#3636);+#6812=ORIENTED_EDGE('',*,*,#6813,.T.);+#6813=EDGE_CURVE('',#6808,#6814,#6816,.T.);+#6814=VERTEX_POINT('',#6815);+#6815=CARTESIAN_POINT('',(-3.496201938253,4.36,0.443412044417));+#6816=LINE('',#6809,#3642);+#6817=ORIENTED_EDGE('',*,*,#6818,.T.);+#6818=EDGE_CURVE('',#6814,#6819,#6821,.T.);+#6819=VERTEX_POINT('',#6820);+#6820=CARTESIAN_POINT('',(-3.25,4.36,0.65));+#6821=CIRCLE('',#6822,0.25);+#6822=AXIS2_PLACEMENT_3D('',#6769,#3649,#3650);+#6823=ORIENTED_EDGE('',*,*,#6824,.T.);+#6824=EDGE_CURVE('',#6819,#1647,#6825,.T.);+#6825=LINE('',#6820,#718);+#6826=PLANE('',#6827);+#6827=AXIS2_PLACEMENT_3D('',#6828,#781,#13);+#6828=CARTESIAN_POINT('',(-3.487377466565,4.36,0.305338822795));+#6829=ADVANCED_FACE('',(#6830),#724,.F.);+#6830=FACE_BOUND('',#6831,.F.);+#6831=EDGE_LOOP('',(#6832,#6833,#6837,#6838));+#6832=ORIENTED_EDGE('',*,*,#1659,.T.);+#6833=ORIENTED_EDGE('',*,*,#6834,.T.);+#6834=EDGE_CURVE('',#1654,#3205,#6835,.T.);+#6835=LINE('',#6836,#718);+#6836=CARTESIAN_POINT('',(-3.25,4.64,0.65));+#6837=ORIENTED_EDGE('',*,*,#3204,.F.);+#6838=ORIENTED_EDGE('',*,*,#6839,.F.);+#6839=EDGE_CURVE('',#1647,#3201,#6825,.T.);+#6840=ADVANCED_FACE('',(#6841),#6897,.F.);+#6841=FACE_BOUND('',#6842,.F.);+#6842=EDGE_LOOP('',(#6843,#6844,#6845,#6852,#6857,#6864,#6869,#6874,#6879,#6885,#6890,#6895));+#6843=ORIENTED_EDGE('',*,*,#1653,.F.);+#6844=ORIENTED_EDGE('',*,*,#1664,.T.);+#6845=ORIENTED_EDGE('',*,*,#6846,.T.);+#6846=EDGE_CURVE('',#1665,#6847,#6849,.T.);+#6847=VERTEX_POINT('',#6848);+#6848=CARTESIAN_POINT('',(-3.348480775301,4.64,0.417364817767));+#6849=CIRCLE('',#6850,0.1);+#6850=AXIS2_PLACEMENT_3D('',#6851,#3596,#3597);+#6851=CARTESIAN_POINT('',(-3.25,4.64,0.4));+#6852=ORIENTED_EDGE('',*,*,#6853,.T.);+#6853=EDGE_CURVE('',#6847,#6854,#6856,.T.);+#6854=VERTEX_POINT('',#6855);+#6855=CARTESIAN_POINT('',(-3.380247108853,4.64,0.206587955583));+#6856=LINE('',#6848,#3603);+#6857=ORIENTED_EDGE('',*,*,#6858,.T.);+#6858=EDGE_CURVE('',#6854,#6859,#6861,.T.);+#6859=VERTEX_POINT('',#6860);+#6860=CARTESIAN_POINT('',(-3.626449047106,4.64,5.551115123126E-17));+#6861=CIRCLE('',#6862,0.25);+#6862=AXIS2_PLACEMENT_3D('',#6863,#3612,#3613);+#6863=CARTESIAN_POINT('',(-3.626449047106,4.64,0.25));+#6864=ORIENTED_EDGE('',*,*,#6865,.T.);+#6865=EDGE_CURVE('',#6859,#6866,#6868,.T.);+#6866=VERTEX_POINT('',#6867);+#6867=CARTESIAN_POINT('',(-4.05,4.64,5.551115123126E-17));+#6868=LINE('',#6860,#768);+#6869=ORIENTED_EDGE('',*,*,#6870,.T.);+#6870=EDGE_CURVE('',#6866,#6871,#6873,.T.);+#6871=VERTEX_POINT('',#6872);+#6872=CARTESIAN_POINT('',(-4.05,4.64,0.15));+#6873=LINE('',#6867,#754);+#6874=ORIENTED_EDGE('',*,*,#6875,.T.);+#6875=EDGE_CURVE('',#6871,#6876,#6878,.T.);+#6876=VERTEX_POINT('',#6877);+#6877=CARTESIAN_POINT('',(-3.626449047106,4.64,0.15));+#6878=LINE('',#6872,#718);+#6879=ORIENTED_EDGE('',*,*,#6880,.T.);+#6880=EDGE_CURVE('',#6876,#6881,#6883,.T.);+#6881=VERTEX_POINT('',#6882);+#6882=CARTESIAN_POINT('',(-3.527968271805,4.64,0.232635182233));+#6883=CIRCLE('',#6884,0.1);+#6884=AXIS2_PLACEMENT_3D('',#6863,#3635,#3636);+#6885=ORIENTED_EDGE('',*,*,#6886,.T.);+#6886=EDGE_CURVE('',#6881,#6887,#6889,.T.);+#6887=VERTEX_POINT('',#6888);+#6888=CARTESIAN_POINT('',(-3.496201938253,4.64,0.443412044417));+#6889=LINE('',#6882,#3642);+#6890=ORIENTED_EDGE('',*,*,#6891,.T.);+#6891=EDGE_CURVE('',#6887,#6892,#6893,.T.);+#6892=VERTEX_POINT('',#6836);+#6893=CIRCLE('',#6894,0.25);+#6894=AXIS2_PLACEMENT_3D('',#6851,#3649,#3650);+#6895=ORIENTED_EDGE('',*,*,#6896,.T.);+#6896=EDGE_CURVE('',#6892,#1654,#6835,.T.);+#6897=PLANE('',#6898);+#6898=AXIS2_PLACEMENT_3D('',#6899,#781,#13);+#6899=CARTESIAN_POINT('',(-3.487377466565,4.64,0.305338822795));+#6900=ADVANCED_FACE('',(#6901),#6915,.F.);+#6901=FACE_BOUND('',#6902,.F.);+#6902=EDGE_LOOP('',(#6903,#6904,#6911,#6914));+#6903=ORIENTED_EDGE('',*,*,#1677,.T.);+#6904=ORIENTED_EDGE('',*,*,#6905,.T.);+#6905=EDGE_CURVE('',#1672,#6906,#6908,.T.);+#6906=VERTEX_POINT('',#6907);+#6907=CARTESIAN_POINT('',(-3.348480775301,4.86,0.417364817767));+#6908=CIRCLE('',#6909,0.1);+#6909=AXIS2_PLACEMENT_3D('',#6910,#3596,#3597);+#6910=CARTESIAN_POINT('',(-3.25,4.86,0.4));+#6911=ORIENTED_EDGE('',*,*,#6912,.F.);+#6912=EDGE_CURVE('',#6847,#6906,#6913,.T.);+#6913=LINE('',#6848,#780);+#6914=ORIENTED_EDGE('',*,*,#6846,.F.);+#6915=CYLINDRICAL_SURFACE('',#6916,0.1);+#6916=AXIS2_PLACEMENT_3D('',#6851,#3673,#3597);+#6917=ADVANCED_FACE('',(#6918),#6967,.T.);+#6918=FACE_BOUND('',#6919,.T.);+#6919=EDGE_LOOP('',(#1684,#1670,#6904,#6920,#6925,#6932,#6937,#6942,#6947,#6953,#6958,#6964));+#6920=ORIENTED_EDGE('',*,*,#6921,.T.);+#6921=EDGE_CURVE('',#6906,#6922,#6924,.T.);+#6922=VERTEX_POINT('',#6923);+#6923=CARTESIAN_POINT('',(-3.380247108853,4.86,0.206587955583));+#6924=LINE('',#6907,#3603);+#6925=ORIENTED_EDGE('',*,*,#6926,.T.);+#6926=EDGE_CURVE('',#6922,#6927,#6929,.T.);+#6927=VERTEX_POINT('',#6928);+#6928=CARTESIAN_POINT('',(-3.626449047106,4.86,5.551115123126E-17));+#6929=CIRCLE('',#6930,0.25);+#6930=AXIS2_PLACEMENT_3D('',#6931,#3612,#3613);+#6931=CARTESIAN_POINT('',(-3.626449047106,4.86,0.25));+#6932=ORIENTED_EDGE('',*,*,#6933,.T.);+#6933=EDGE_CURVE('',#6927,#6934,#6936,.T.);+#6934=VERTEX_POINT('',#6935);+#6935=CARTESIAN_POINT('',(-4.05,4.86,5.551115123126E-17));+#6936=LINE('',#6928,#768);+#6937=ORIENTED_EDGE('',*,*,#6938,.T.);+#6938=EDGE_CURVE('',#6934,#6939,#6941,.T.);+#6939=VERTEX_POINT('',#6940);+#6940=CARTESIAN_POINT('',(-4.05,4.86,0.15));+#6941=LINE('',#6935,#754);+#6942=ORIENTED_EDGE('',*,*,#6943,.T.);+#6943=EDGE_CURVE('',#6939,#6944,#6946,.T.);+#6944=VERTEX_POINT('',#6945);+#6945=CARTESIAN_POINT('',(-3.626449047106,4.86,0.15));+#6946=LINE('',#6940,#718);+#6947=ORIENTED_EDGE('',*,*,#6948,.T.);+#6948=EDGE_CURVE('',#6944,#6949,#6951,.T.);+#6949=VERTEX_POINT('',#6950);+#6950=CARTESIAN_POINT('',(-3.527968271805,4.86,0.232635182233));+#6951=CIRCLE('',#6952,0.1);+#6952=AXIS2_PLACEMENT_3D('',#6931,#3635,#3636);+#6953=ORIENTED_EDGE('',*,*,#6954,.T.);+#6954=EDGE_CURVE('',#6949,#6955,#6957,.T.);+#6955=VERTEX_POINT('',#6956);+#6956=CARTESIAN_POINT('',(-3.496201938253,4.86,0.443412044417));+#6957=LINE('',#6950,#3642);+#6958=ORIENTED_EDGE('',*,*,#6959,.T.);+#6959=EDGE_CURVE('',#6955,#6960,#6962,.T.);+#6960=VERTEX_POINT('',#6961);+#6961=CARTESIAN_POINT('',(-3.25,4.86,0.65));+#6962=CIRCLE('',#6963,0.25);+#6963=AXIS2_PLACEMENT_3D('',#6910,#3649,#3650);+#6964=ORIENTED_EDGE('',*,*,#6965,.T.);+#6965=EDGE_CURVE('',#6960,#1686,#6966,.T.);+#6966=LINE('',#6961,#718);+#6967=PLANE('',#6968);+#6968=AXIS2_PLACEMENT_3D('',#6969,#781,#13);+#6969=CARTESIAN_POINT('',(-3.487377466565,4.86,0.305338822795));+#6970=ADVANCED_FACE('',(#6971),#724,.F.);+#6971=FACE_BOUND('',#6972,.F.);+#6972=EDGE_LOOP('',(#6973,#6974,#6978,#6979));+#6973=ORIENTED_EDGE('',*,*,#1698,.T.);+#6974=ORIENTED_EDGE('',*,*,#6975,.T.);+#6975=EDGE_CURVE('',#1693,#3213,#6976,.T.);+#6976=LINE('',#6977,#718);+#6977=CARTESIAN_POINT('',(-3.25,5.14,0.65));+#6978=ORIENTED_EDGE('',*,*,#3212,.F.);+#6979=ORIENTED_EDGE('',*,*,#6980,.F.);+#6980=EDGE_CURVE('',#1686,#3209,#6966,.T.);+#6981=ADVANCED_FACE('',(#6982),#7038,.F.);+#6982=FACE_BOUND('',#6983,.F.);+#6983=EDGE_LOOP('',(#6984,#6985,#6986,#6993,#6998,#7005,#7010,#7015,#7020,#7026,#7031,#7036));+#6984=ORIENTED_EDGE('',*,*,#1692,.F.);+#6985=ORIENTED_EDGE('',*,*,#1703,.T.);+#6986=ORIENTED_EDGE('',*,*,#6987,.T.);+#6987=EDGE_CURVE('',#1704,#6988,#6990,.T.);+#6988=VERTEX_POINT('',#6989);+#6989=CARTESIAN_POINT('',(-3.348480775301,5.14,0.417364817767));+#6990=CIRCLE('',#6991,0.1);+#6991=AXIS2_PLACEMENT_3D('',#6992,#3596,#3597);+#6992=CARTESIAN_POINT('',(-3.25,5.14,0.4));+#6993=ORIENTED_EDGE('',*,*,#6994,.T.);+#6994=EDGE_CURVE('',#6988,#6995,#6997,.T.);+#6995=VERTEX_POINT('',#6996);+#6996=CARTESIAN_POINT('',(-3.380247108853,5.14,0.206587955583));+#6997=LINE('',#6989,#3603);+#6998=ORIENTED_EDGE('',*,*,#6999,.T.);+#6999=EDGE_CURVE('',#6995,#7000,#7002,.T.);+#7000=VERTEX_POINT('',#7001);+#7001=CARTESIAN_POINT('',(-3.626449047106,5.14,5.551115123126E-17));+#7002=CIRCLE('',#7003,0.25);+#7003=AXIS2_PLACEMENT_3D('',#7004,#3612,#3613);+#7004=CARTESIAN_POINT('',(-3.626449047106,5.14,0.25));+#7005=ORIENTED_EDGE('',*,*,#7006,.T.);+#7006=EDGE_CURVE('',#7000,#7007,#7009,.T.);+#7007=VERTEX_POINT('',#7008);+#7008=CARTESIAN_POINT('',(-4.05,5.14,5.551115123126E-17));+#7009=LINE('',#7001,#768);+#7010=ORIENTED_EDGE('',*,*,#7011,.T.);+#7011=EDGE_CURVE('',#7007,#7012,#7014,.T.);+#7012=VERTEX_POINT('',#7013);+#7013=CARTESIAN_POINT('',(-4.05,5.14,0.15));+#7014=LINE('',#7008,#754);+#7015=ORIENTED_EDGE('',*,*,#7016,.T.);+#7016=EDGE_CURVE('',#7012,#7017,#7019,.T.);+#7017=VERTEX_POINT('',#7018);+#7018=CARTESIAN_POINT('',(-3.626449047106,5.14,0.15));+#7019=LINE('',#7013,#718);+#7020=ORIENTED_EDGE('',*,*,#7021,.T.);+#7021=EDGE_CURVE('',#7017,#7022,#7024,.T.);+#7022=VERTEX_POINT('',#7023);+#7023=CARTESIAN_POINT('',(-3.527968271805,5.14,0.232635182233));+#7024=CIRCLE('',#7025,0.1);+#7025=AXIS2_PLACEMENT_3D('',#7004,#3635,#3636);+#7026=ORIENTED_EDGE('',*,*,#7027,.T.);+#7027=EDGE_CURVE('',#7022,#7028,#7030,.T.);+#7028=VERTEX_POINT('',#7029);+#7029=CARTESIAN_POINT('',(-3.496201938253,5.14,0.443412044417));+#7030=LINE('',#7023,#3642);+#7031=ORIENTED_EDGE('',*,*,#7032,.T.);+#7032=EDGE_CURVE('',#7028,#7033,#7034,.T.);+#7033=VERTEX_POINT('',#6977);+#7034=CIRCLE('',#7035,0.25);+#7035=AXIS2_PLACEMENT_3D('',#6992,#3649,#3650);+#7036=ORIENTED_EDGE('',*,*,#7037,.T.);+#7037=EDGE_CURVE('',#7033,#1693,#6976,.T.);+#7038=PLANE('',#7039);+#7039=AXIS2_PLACEMENT_3D('',#7040,#781,#13);+#7040=CARTESIAN_POINT('',(-3.487377466565,5.14,0.305338822795));+#7041=ADVANCED_FACE('',(#7042),#7056,.F.);+#7042=FACE_BOUND('',#7043,.F.);+#7043=EDGE_LOOP('',(#7044,#7045,#7052,#7055));+#7044=ORIENTED_EDGE('',*,*,#1716,.T.);+#7045=ORIENTED_EDGE('',*,*,#7046,.T.);+#7046=EDGE_CURVE('',#1711,#7047,#7049,.T.);+#7047=VERTEX_POINT('',#7048);+#7048=CARTESIAN_POINT('',(-3.348480775301,5.36,0.417364817767));+#7049=CIRCLE('',#7050,0.1);+#7050=AXIS2_PLACEMENT_3D('',#7051,#3596,#3597);+#7051=CARTESIAN_POINT('',(-3.25,5.36,0.4));+#7052=ORIENTED_EDGE('',*,*,#7053,.F.);+#7053=EDGE_CURVE('',#6988,#7047,#7054,.T.);+#7054=LINE('',#6989,#780);+#7055=ORIENTED_EDGE('',*,*,#6987,.F.);+#7056=CYLINDRICAL_SURFACE('',#7057,0.1);+#7057=AXIS2_PLACEMENT_3D('',#6992,#3673,#3597);+#7058=ADVANCED_FACE('',(#7059),#7108,.T.);+#7059=FACE_BOUND('',#7060,.T.);+#7060=EDGE_LOOP('',(#1723,#1709,#7045,#7061,#7066,#7073,#7078,#7083,#7088,#7094,#7099,#7105));+#7061=ORIENTED_EDGE('',*,*,#7062,.T.);+#7062=EDGE_CURVE('',#7047,#7063,#7065,.T.);+#7063=VERTEX_POINT('',#7064);+#7064=CARTESIAN_POINT('',(-3.380247108853,5.36,0.206587955583));+#7065=LINE('',#7048,#3603);+#7066=ORIENTED_EDGE('',*,*,#7067,.T.);+#7067=EDGE_CURVE('',#7063,#7068,#7070,.T.);+#7068=VERTEX_POINT('',#7069);+#7069=CARTESIAN_POINT('',(-3.626449047106,5.36,5.551115123126E-17));+#7070=CIRCLE('',#7071,0.25);+#7071=AXIS2_PLACEMENT_3D('',#7072,#3612,#3613);+#7072=CARTESIAN_POINT('',(-3.626449047106,5.36,0.25));+#7073=ORIENTED_EDGE('',*,*,#7074,.T.);+#7074=EDGE_CURVE('',#7068,#7075,#7077,.T.);+#7075=VERTEX_POINT('',#7076);+#7076=CARTESIAN_POINT('',(-4.05,5.36,5.551115123126E-17));+#7077=LINE('',#7069,#768);+#7078=ORIENTED_EDGE('',*,*,#7079,.T.);+#7079=EDGE_CURVE('',#7075,#7080,#7082,.T.);+#7080=VERTEX_POINT('',#7081);+#7081=CARTESIAN_POINT('',(-4.05,5.36,0.15));+#7082=LINE('',#7076,#754);+#7083=ORIENTED_EDGE('',*,*,#7084,.T.);+#7084=EDGE_CURVE('',#7080,#7085,#7087,.T.);+#7085=VERTEX_POINT('',#7086);+#7086=CARTESIAN_POINT('',(-3.626449047106,5.36,0.15));+#7087=LINE('',#7081,#718);+#7088=ORIENTED_EDGE('',*,*,#7089,.T.);+#7089=EDGE_CURVE('',#7085,#7090,#7092,.T.);+#7090=VERTEX_POINT('',#7091);+#7091=CARTESIAN_POINT('',(-3.527968271805,5.36,0.232635182233));+#7092=CIRCLE('',#7093,0.1);+#7093=AXIS2_PLACEMENT_3D('',#7072,#3635,#3636);+#7094=ORIENTED_EDGE('',*,*,#7095,.T.);+#7095=EDGE_CURVE('',#7090,#7096,#7098,.T.);+#7096=VERTEX_POINT('',#7097);+#7097=CARTESIAN_POINT('',(-3.496201938253,5.36,0.443412044417));+#7098=LINE('',#7091,#3642);+#7099=ORIENTED_EDGE('',*,*,#7100,.T.);+#7100=EDGE_CURVE('',#7096,#7101,#7103,.T.);+#7101=VERTEX_POINT('',#7102);+#7102=CARTESIAN_POINT('',(-3.25,5.36,0.65));+#7103=CIRCLE('',#7104,0.25);+#7104=AXIS2_PLACEMENT_3D('',#7051,#3649,#3650);+#7105=ORIENTED_EDGE('',*,*,#7106,.T.);+#7106=EDGE_CURVE('',#7101,#1725,#7107,.T.);+#7107=LINE('',#7102,#718);+#7108=PLANE('',#7109);+#7109=AXIS2_PLACEMENT_3D('',#7110,#781,#13);+#7110=CARTESIAN_POINT('',(-3.487377466565,5.36,0.305338822795));+#7111=ADVANCED_FACE('',(#7112),#724,.F.);+#7112=FACE_BOUND('',#7113,.F.);+#7113=EDGE_LOOP('',(#7114,#7115,#7119,#7120));+#7114=ORIENTED_EDGE('',*,*,#1737,.T.);+#7115=ORIENTED_EDGE('',*,*,#7116,.T.);+#7116=EDGE_CURVE('',#1732,#3221,#7117,.T.);+#7117=LINE('',#7118,#718);+#7118=CARTESIAN_POINT('',(-3.25,5.64,0.65));+#7119=ORIENTED_EDGE('',*,*,#3220,.F.);+#7120=ORIENTED_EDGE('',*,*,#7121,.F.);+#7121=EDGE_CURVE('',#1725,#3217,#7107,.T.);+#7122=ADVANCED_FACE('',(#7123),#7179,.F.);+#7123=FACE_BOUND('',#7124,.F.);+#7124=EDGE_LOOP('',(#7125,#7126,#7127,#7134,#7139,#7146,#7151,#7156,#7161,#7167,#7172,#7177));+#7125=ORIENTED_EDGE('',*,*,#1731,.F.);+#7126=ORIENTED_EDGE('',*,*,#1742,.T.);+#7127=ORIENTED_EDGE('',*,*,#7128,.T.);+#7128=EDGE_CURVE('',#1743,#7129,#7131,.T.);+#7129=VERTEX_POINT('',#7130);+#7130=CARTESIAN_POINT('',(-3.348480775301,5.64,0.417364817767));+#7131=CIRCLE('',#7132,0.1);+#7132=AXIS2_PLACEMENT_3D('',#7133,#3596,#3597);+#7133=CARTESIAN_POINT('',(-3.25,5.64,0.4));+#7134=ORIENTED_EDGE('',*,*,#7135,.T.);+#7135=EDGE_CURVE('',#7129,#7136,#7138,.T.);+#7136=VERTEX_POINT('',#7137);+#7137=CARTESIAN_POINT('',(-3.380247108853,5.64,0.206587955583));+#7138=LINE('',#7130,#3603);+#7139=ORIENTED_EDGE('',*,*,#7140,.T.);+#7140=EDGE_CURVE('',#7136,#7141,#7143,.T.);+#7141=VERTEX_POINT('',#7142);+#7142=CARTESIAN_POINT('',(-3.626449047106,5.64,5.551115123126E-17));+#7143=CIRCLE('',#7144,0.25);+#7144=AXIS2_PLACEMENT_3D('',#7145,#3612,#3613);+#7145=CARTESIAN_POINT('',(-3.626449047106,5.64,0.25));+#7146=ORIENTED_EDGE('',*,*,#7147,.T.);+#7147=EDGE_CURVE('',#7141,#7148,#7150,.T.);+#7148=VERTEX_POINT('',#7149);+#7149=CARTESIAN_POINT('',(-4.05,5.64,5.551115123126E-17));+#7150=LINE('',#7142,#768);+#7151=ORIENTED_EDGE('',*,*,#7152,.T.);+#7152=EDGE_CURVE('',#7148,#7153,#7155,.T.);+#7153=VERTEX_POINT('',#7154);+#7154=CARTESIAN_POINT('',(-4.05,5.64,0.15));+#7155=LINE('',#7149,#754);+#7156=ORIENTED_EDGE('',*,*,#7157,.T.);+#7157=EDGE_CURVE('',#7153,#7158,#7160,.T.);+#7158=VERTEX_POINT('',#7159);+#7159=CARTESIAN_POINT('',(-3.626449047106,5.64,0.15));+#7160=LINE('',#7154,#718);+#7161=ORIENTED_EDGE('',*,*,#7162,.T.);+#7162=EDGE_CURVE('',#7158,#7163,#7165,.T.);+#7163=VERTEX_POINT('',#7164);+#7164=CARTESIAN_POINT('',(-3.527968271805,5.64,0.232635182233));+#7165=CIRCLE('',#7166,0.1);+#7166=AXIS2_PLACEMENT_3D('',#7145,#3635,#3636);+#7167=ORIENTED_EDGE('',*,*,#7168,.T.);+#7168=EDGE_CURVE('',#7163,#7169,#7171,.T.);+#7169=VERTEX_POINT('',#7170);+#7170=CARTESIAN_POINT('',(-3.496201938253,5.64,0.443412044417));+#7171=LINE('',#7164,#3642);+#7172=ORIENTED_EDGE('',*,*,#7173,.T.);+#7173=EDGE_CURVE('',#7169,#7174,#7175,.T.);+#7174=VERTEX_POINT('',#7118);+#7175=CIRCLE('',#7176,0.25);+#7176=AXIS2_PLACEMENT_3D('',#7133,#3649,#3650);+#7177=ORIENTED_EDGE('',*,*,#7178,.T.);+#7178=EDGE_CURVE('',#7174,#1732,#7117,.T.);+#7179=PLANE('',#7180);+#7180=AXIS2_PLACEMENT_3D('',#7181,#781,#13);+#7181=CARTESIAN_POINT('',(-3.487377466565,5.64,0.305338822795));+#7182=ADVANCED_FACE('',(#7183),#7197,.F.);+#7183=FACE_BOUND('',#7184,.F.);+#7184=EDGE_LOOP('',(#7185,#7186,#7193,#7196));+#7185=ORIENTED_EDGE('',*,*,#1755,.T.);+#7186=ORIENTED_EDGE('',*,*,#7187,.T.);+#7187=EDGE_CURVE('',#1750,#7188,#7190,.T.);+#7188=VERTEX_POINT('',#7189);+#7189=CARTESIAN_POINT('',(-3.348480775301,5.86,0.417364817767));+#7190=CIRCLE('',#7191,0.1);+#7191=AXIS2_PLACEMENT_3D('',#7192,#3596,#3597);+#7192=CARTESIAN_POINT('',(-3.25,5.86,0.4));+#7193=ORIENTED_EDGE('',*,*,#7194,.F.);+#7194=EDGE_CURVE('',#7129,#7188,#7195,.T.);+#7195=LINE('',#7130,#780);+#7196=ORIENTED_EDGE('',*,*,#7128,.F.);+#7197=CYLINDRICAL_SURFACE('',#7198,0.1);+#7198=AXIS2_PLACEMENT_3D('',#7133,#3673,#3597);+#7199=ADVANCED_FACE('',(#7200),#7249,.T.);+#7200=FACE_BOUND('',#7201,.T.);+#7201=EDGE_LOOP('',(#1762,#1748,#7186,#7202,#7207,#7214,#7219,#7224,#7229,#7235,#7240,#7246));+#7202=ORIENTED_EDGE('',*,*,#7203,.T.);+#7203=EDGE_CURVE('',#7188,#7204,#7206,.T.);+#7204=VERTEX_POINT('',#7205);+#7205=CARTESIAN_POINT('',(-3.380247108853,5.86,0.206587955583));+#7206=LINE('',#7189,#3603);+#7207=ORIENTED_EDGE('',*,*,#7208,.T.);+#7208=EDGE_CURVE('',#7204,#7209,#7211,.T.);+#7209=VERTEX_POINT('',#7210);+#7210=CARTESIAN_POINT('',(-3.626449047106,5.86,5.551115123126E-17));+#7211=CIRCLE('',#7212,0.25);+#7212=AXIS2_PLACEMENT_3D('',#7213,#3612,#3613);+#7213=CARTESIAN_POINT('',(-3.626449047106,5.86,0.25));+#7214=ORIENTED_EDGE('',*,*,#7215,.T.);+#7215=EDGE_CURVE('',#7209,#7216,#7218,.T.);+#7216=VERTEX_POINT('',#7217);+#7217=CARTESIAN_POINT('',(-4.05,5.86,5.551115123126E-17));+#7218=LINE('',#7210,#768);+#7219=ORIENTED_EDGE('',*,*,#7220,.T.);+#7220=EDGE_CURVE('',#7216,#7221,#7223,.T.);+#7221=VERTEX_POINT('',#7222);+#7222=CARTESIAN_POINT('',(-4.05,5.86,0.15));+#7223=LINE('',#7217,#754);+#7224=ORIENTED_EDGE('',*,*,#7225,.T.);+#7225=EDGE_CURVE('',#7221,#7226,#7228,.T.);+#7226=VERTEX_POINT('',#7227);+#7227=CARTESIAN_POINT('',(-3.626449047106,5.86,0.15));+#7228=LINE('',#7222,#718);+#7229=ORIENTED_EDGE('',*,*,#7230,.T.);+#7230=EDGE_CURVE('',#7226,#7231,#7233,.T.);+#7231=VERTEX_POINT('',#7232);+#7232=CARTESIAN_POINT('',(-3.527968271805,5.86,0.232635182233));+#7233=CIRCLE('',#7234,0.1);+#7234=AXIS2_PLACEMENT_3D('',#7213,#3635,#3636);+#7235=ORIENTED_EDGE('',*,*,#7236,.T.);+#7236=EDGE_CURVE('',#7231,#7237,#7239,.T.);+#7237=VERTEX_POINT('',#7238);+#7238=CARTESIAN_POINT('',(-3.496201938253,5.86,0.443412044417));+#7239=LINE('',#7232,#3642);+#7240=ORIENTED_EDGE('',*,*,#7241,.T.);+#7241=EDGE_CURVE('',#7237,#7242,#7244,.T.);+#7242=VERTEX_POINT('',#7243);+#7243=CARTESIAN_POINT('',(-3.25,5.86,0.65));+#7244=CIRCLE('',#7245,0.25);+#7245=AXIS2_PLACEMENT_3D('',#7192,#3649,#3650);+#7246=ORIENTED_EDGE('',*,*,#7247,.T.);+#7247=EDGE_CURVE('',#7242,#1764,#7248,.T.);+#7248=LINE('',#7243,#718);+#7249=PLANE('',#7250);+#7250=AXIS2_PLACEMENT_3D('',#7251,#781,#13);+#7251=CARTESIAN_POINT('',(-3.487377466565,5.86,0.305338822795));+#7252=ADVANCED_FACE('',(#7253),#724,.F.);+#7253=FACE_BOUND('',#7254,.F.);+#7254=EDGE_LOOP('',(#7255,#7256,#7260,#7261));+#7255=ORIENTED_EDGE('',*,*,#1776,.T.);+#7256=ORIENTED_EDGE('',*,*,#7257,.T.);+#7257=EDGE_CURVE('',#1771,#3229,#7258,.T.);+#7258=LINE('',#7259,#718);+#7259=CARTESIAN_POINT('',(-3.25,6.14,0.65));+#7260=ORIENTED_EDGE('',*,*,#3228,.F.);+#7261=ORIENTED_EDGE('',*,*,#7262,.F.);+#7262=EDGE_CURVE('',#1764,#3225,#7248,.T.);+#7263=ADVANCED_FACE('',(#7264),#7320,.F.);+#7264=FACE_BOUND('',#7265,.F.);+#7265=EDGE_LOOP('',(#7266,#7267,#7268,#7275,#7280,#7287,#7292,#7297,#7302,#7308,#7313,#7318));+#7266=ORIENTED_EDGE('',*,*,#1770,.F.);+#7267=ORIENTED_EDGE('',*,*,#1781,.T.);+#7268=ORIENTED_EDGE('',*,*,#7269,.T.);+#7269=EDGE_CURVE('',#1782,#7270,#7272,.T.);+#7270=VERTEX_POINT('',#7271);+#7271=CARTESIAN_POINT('',(-3.348480775301,6.14,0.417364817767));+#7272=CIRCLE('',#7273,0.1);+#7273=AXIS2_PLACEMENT_3D('',#7274,#3596,#3597);+#7274=CARTESIAN_POINT('',(-3.25,6.14,0.4));+#7275=ORIENTED_EDGE('',*,*,#7276,.T.);+#7276=EDGE_CURVE('',#7270,#7277,#7279,.T.);+#7277=VERTEX_POINT('',#7278);+#7278=CARTESIAN_POINT('',(-3.380247108853,6.14,0.206587955583));+#7279=LINE('',#7271,#3603);+#7280=ORIENTED_EDGE('',*,*,#7281,.T.);+#7281=EDGE_CURVE('',#7277,#7282,#7284,.T.);+#7282=VERTEX_POINT('',#7283);+#7283=CARTESIAN_POINT('',(-3.626449047106,6.14,5.551115123126E-17));+#7284=CIRCLE('',#7285,0.25);+#7285=AXIS2_PLACEMENT_3D('',#7286,#3612,#3613);+#7286=CARTESIAN_POINT('',(-3.626449047106,6.14,0.25));+#7287=ORIENTED_EDGE('',*,*,#7288,.T.);+#7288=EDGE_CURVE('',#7282,#7289,#7291,.T.);+#7289=VERTEX_POINT('',#7290);+#7290=CARTESIAN_POINT('',(-4.05,6.14,5.551115123126E-17));+#7291=LINE('',#7283,#768);+#7292=ORIENTED_EDGE('',*,*,#7293,.T.);+#7293=EDGE_CURVE('',#7289,#7294,#7296,.T.);+#7294=VERTEX_POINT('',#7295);+#7295=CARTESIAN_POINT('',(-4.05,6.14,0.15));+#7296=LINE('',#7290,#754);+#7297=ORIENTED_EDGE('',*,*,#7298,.T.);+#7298=EDGE_CURVE('',#7294,#7299,#7301,.T.);+#7299=VERTEX_POINT('',#7300);+#7300=CARTESIAN_POINT('',(-3.626449047106,6.14,0.15));+#7301=LINE('',#7295,#718);+#7302=ORIENTED_EDGE('',*,*,#7303,.T.);+#7303=EDGE_CURVE('',#7299,#7304,#7306,.T.);+#7304=VERTEX_POINT('',#7305);+#7305=CARTESIAN_POINT('',(-3.527968271805,6.14,0.232635182233));+#7306=CIRCLE('',#7307,0.1);+#7307=AXIS2_PLACEMENT_3D('',#7286,#3635,#3636);+#7308=ORIENTED_EDGE('',*,*,#7309,.T.);+#7309=EDGE_CURVE('',#7304,#7310,#7312,.T.);+#7310=VERTEX_POINT('',#7311);+#7311=CARTESIAN_POINT('',(-3.496201938253,6.14,0.443412044417));+#7312=LINE('',#7305,#3642);+#7313=ORIENTED_EDGE('',*,*,#7314,.T.);+#7314=EDGE_CURVE('',#7310,#7315,#7316,.T.);+#7315=VERTEX_POINT('',#7259);+#7316=CIRCLE('',#7317,0.25);+#7317=AXIS2_PLACEMENT_3D('',#7274,#3649,#3650);+#7318=ORIENTED_EDGE('',*,*,#7319,.T.);+#7319=EDGE_CURVE('',#7315,#1771,#7258,.T.);+#7320=PLANE('',#7321);+#7321=AXIS2_PLACEMENT_3D('',#7322,#781,#13);+#7322=CARTESIAN_POINT('',(-3.487377466565,6.14,0.305338822795));+#7323=ADVANCED_FACE('',(#7324),#7338,.F.);+#7324=FACE_BOUND('',#7325,.F.);+#7325=EDGE_LOOP('',(#7326,#7327,#7334,#7337));+#7326=ORIENTED_EDGE('',*,*,#1794,.T.);+#7327=ORIENTED_EDGE('',*,*,#7328,.T.);+#7328=EDGE_CURVE('',#1789,#7329,#7331,.T.);+#7329=VERTEX_POINT('',#7330);+#7330=CARTESIAN_POINT('',(-3.348480775301,6.36,0.417364817767));+#7331=CIRCLE('',#7332,0.1);+#7332=AXIS2_PLACEMENT_3D('',#7333,#3596,#3597);+#7333=CARTESIAN_POINT('',(-3.25,6.36,0.4));+#7334=ORIENTED_EDGE('',*,*,#7335,.F.);+#7335=EDGE_CURVE('',#7270,#7329,#7336,.T.);+#7336=LINE('',#7271,#780);+#7337=ORIENTED_EDGE('',*,*,#7269,.F.);+#7338=CYLINDRICAL_SURFACE('',#7339,0.1);+#7339=AXIS2_PLACEMENT_3D('',#7274,#3673,#3597);+#7340=ADVANCED_FACE('',(#7341),#7390,.T.);+#7341=FACE_BOUND('',#7342,.T.);+#7342=EDGE_LOOP('',(#1801,#1787,#7327,#7343,#7348,#7355,#7360,#7365,#7370,#7376,#7381,#7387));+#7343=ORIENTED_EDGE('',*,*,#7344,.T.);+#7344=EDGE_CURVE('',#7329,#7345,#7347,.T.);+#7345=VERTEX_POINT('',#7346);+#7346=CARTESIAN_POINT('',(-3.380247108853,6.36,0.206587955583));+#7347=LINE('',#7330,#3603);+#7348=ORIENTED_EDGE('',*,*,#7349,.T.);+#7349=EDGE_CURVE('',#7345,#7350,#7352,.T.);+#7350=VERTEX_POINT('',#7351);+#7351=CARTESIAN_POINT('',(-3.626449047106,6.36,5.551115123126E-17));+#7352=CIRCLE('',#7353,0.25);+#7353=AXIS2_PLACEMENT_3D('',#7354,#3612,#3613);+#7354=CARTESIAN_POINT('',(-3.626449047106,6.36,0.25));+#7355=ORIENTED_EDGE('',*,*,#7356,.T.);+#7356=EDGE_CURVE('',#7350,#7357,#7359,.T.);+#7357=VERTEX_POINT('',#7358);+#7358=CARTESIAN_POINT('',(-4.05,6.36,5.551115123126E-17));+#7359=LINE('',#7351,#768);+#7360=ORIENTED_EDGE('',*,*,#7361,.T.);+#7361=EDGE_CURVE('',#7357,#7362,#7364,.T.);+#7362=VERTEX_POINT('',#7363);+#7363=CARTESIAN_POINT('',(-4.05,6.36,0.15));+#7364=LINE('',#7358,#754);+#7365=ORIENTED_EDGE('',*,*,#7366,.T.);+#7366=EDGE_CURVE('',#7362,#7367,#7369,.T.);+#7367=VERTEX_POINT('',#7368);+#7368=CARTESIAN_POINT('',(-3.626449047106,6.36,0.15));+#7369=LINE('',#7363,#718);+#7370=ORIENTED_EDGE('',*,*,#7371,.T.);+#7371=EDGE_CURVE('',#7367,#7372,#7374,.T.);+#7372=VERTEX_POINT('',#7373);+#7373=CARTESIAN_POINT('',(-3.527968271805,6.36,0.232635182233));+#7374=CIRCLE('',#7375,0.1);+#7375=AXIS2_PLACEMENT_3D('',#7354,#3635,#3636);+#7376=ORIENTED_EDGE('',*,*,#7377,.T.);+#7377=EDGE_CURVE('',#7372,#7378,#7380,.T.);+#7378=VERTEX_POINT('',#7379);+#7379=CARTESIAN_POINT('',(-3.496201938253,6.36,0.443412044417));+#7380=LINE('',#7373,#3642);+#7381=ORIENTED_EDGE('',*,*,#7382,.T.);+#7382=EDGE_CURVE('',#7378,#7383,#7385,.T.);+#7383=VERTEX_POINT('',#7384);+#7384=CARTESIAN_POINT('',(-3.25,6.36,0.65));+#7385=CIRCLE('',#7386,0.25);+#7386=AXIS2_PLACEMENT_3D('',#7333,#3649,#3650);+#7387=ORIENTED_EDGE('',*,*,#7388,.T.);+#7388=EDGE_CURVE('',#7383,#1803,#7389,.T.);+#7389=LINE('',#7384,#718);+#7390=PLANE('',#7391);+#7391=AXIS2_PLACEMENT_3D('',#7392,#781,#13);+#7392=CARTESIAN_POINT('',(-3.487377466565,6.36,0.305338822795));+#7393=ADVANCED_FACE('',(#7394),#724,.F.);+#7394=FACE_BOUND('',#7395,.F.);+#7395=EDGE_LOOP('',(#7396,#7397,#7398,#7399));+#7396=ORIENTED_EDGE('',*,*,#1815,.T.);+#7397=ORIENTED_EDGE('',*,*,#3011,.T.);+#7398=ORIENTED_EDGE('',*,*,#3236,.F.);+#7399=ORIENTED_EDGE('',*,*,#7400,.F.);+#7400=EDGE_CURVE('',#1803,#3233,#7389,.T.);+#7401=ADVANCED_FACE('',(#7402),#7456,.F.);+#7402=FACE_BOUND('',#7403,.F.);+#7403=EDGE_LOOP('',(#7404,#7405,#7406,#7413,#7418,#7425,#7430,#7435,#7440,#7446,#7451,#7455));+#7404=ORIENTED_EDGE('',*,*,#1809,.F.);+#7405=ORIENTED_EDGE('',*,*,#1820,.T.);+#7406=ORIENTED_EDGE('',*,*,#7407,.T.);+#7407=EDGE_CURVE('',#1821,#7408,#7410,.T.);+#7408=VERTEX_POINT('',#7409);+#7409=CARTESIAN_POINT('',(-3.348480775301,6.64,0.417364817767));+#7410=CIRCLE('',#7411,0.1);+#7411=AXIS2_PLACEMENT_3D('',#7412,#3596,#3597);+#7412=CARTESIAN_POINT('',(-3.25,6.64,0.4));+#7413=ORIENTED_EDGE('',*,*,#7414,.T.);+#7414=EDGE_CURVE('',#7408,#7415,#7417,.T.);+#7415=VERTEX_POINT('',#7416);+#7416=CARTESIAN_POINT('',(-3.380247108853,6.64,0.206587955583));+#7417=LINE('',#7409,#3603);+#7418=ORIENTED_EDGE('',*,*,#7419,.T.);+#7419=EDGE_CURVE('',#7415,#7420,#7422,.T.);+#7420=VERTEX_POINT('',#7421);+#7421=CARTESIAN_POINT('',(-3.626449047106,6.64,5.551115123126E-17));+#7422=CIRCLE('',#7423,0.25);+#7423=AXIS2_PLACEMENT_3D('',#7424,#3612,#3613);+#7424=CARTESIAN_POINT('',(-3.626449047106,6.64,0.25));+#7425=ORIENTED_EDGE('',*,*,#7426,.T.);+#7426=EDGE_CURVE('',#7420,#7427,#7429,.T.);+#7427=VERTEX_POINT('',#7428);+#7428=CARTESIAN_POINT('',(-4.05,6.64,5.551115123126E-17));+#7429=LINE('',#7421,#768);+#7430=ORIENTED_EDGE('',*,*,#7431,.T.);+#7431=EDGE_CURVE('',#7427,#7432,#7434,.T.);+#7432=VERTEX_POINT('',#7433);+#7433=CARTESIAN_POINT('',(-4.05,6.64,0.15));+#7434=LINE('',#7428,#754);+#7435=ORIENTED_EDGE('',*,*,#7436,.T.);+#7436=EDGE_CURVE('',#7432,#7437,#7439,.T.);+#7437=VERTEX_POINT('',#7438);+#7438=CARTESIAN_POINT('',(-3.626449047106,6.64,0.15));+#7439=LINE('',#7433,#718);+#7440=ORIENTED_EDGE('',*,*,#7441,.T.);+#7441=EDGE_CURVE('',#7437,#7442,#7444,.T.);+#7442=VERTEX_POINT('',#7443);+#7443=CARTESIAN_POINT('',(-3.527968271805,6.64,0.232635182233));+#7444=CIRCLE('',#7445,0.1);+#7445=AXIS2_PLACEMENT_3D('',#7424,#3635,#3636);+#7446=ORIENTED_EDGE('',*,*,#7447,.T.);+#7447=EDGE_CURVE('',#7442,#7448,#7450,.T.);+#7448=VERTEX_POINT('',#7449);+#7449=CARTESIAN_POINT('',(-3.496201938253,6.64,0.443412044417));+#7450=LINE('',#7443,#3642);+#7451=ORIENTED_EDGE('',*,*,#7452,.T.);+#7452=EDGE_CURVE('',#7448,#2996,#7453,.T.);+#7453=CIRCLE('',#7454,0.25);+#7454=AXIS2_PLACEMENT_3D('',#7412,#3649,#3650);+#7455=ORIENTED_EDGE('',*,*,#2995,.T.);+#7456=PLANE('',#7457);+#7457=AXIS2_PLACEMENT_3D('',#7458,#781,#13);+#7458=CARTESIAN_POINT('',(-3.487377466565,6.64,0.305338822795));+#7459=ADVANCED_FACE('',(#7460),#7474,.F.);+#7460=FACE_BOUND('',#7461,.F.);+#7461=EDGE_LOOP('',(#7462,#7463,#7470,#7473));+#7462=ORIENTED_EDGE('',*,*,#1833,.T.);+#7463=ORIENTED_EDGE('',*,*,#7464,.T.);+#7464=EDGE_CURVE('',#1828,#7465,#7467,.T.);+#7465=VERTEX_POINT('',#7466);+#7466=CARTESIAN_POINT('',(-3.348480775301,6.86,0.417364817767));+#7467=CIRCLE('',#7468,0.1);+#7468=AXIS2_PLACEMENT_3D('',#7469,#3596,#3597);+#7469=CARTESIAN_POINT('',(-3.25,6.86,0.4));+#7470=ORIENTED_EDGE('',*,*,#7471,.F.);+#7471=EDGE_CURVE('',#7408,#7465,#7472,.T.);+#7472=LINE('',#7409,#780);+#7473=ORIENTED_EDGE('',*,*,#7407,.F.);+#7474=CYLINDRICAL_SURFACE('',#7475,0.1);+#7475=AXIS2_PLACEMENT_3D('',#7412,#3673,#3597);+#7476=ADVANCED_FACE('',(#7477),#7521,.T.);+#7477=FACE_BOUND('',#7478,.T.);+#7478=EDGE_LOOP('',(#1840,#1826,#7463,#7479,#7484,#7491,#7496,#7501,#7506,#7512,#7517,#3003));+#7479=ORIENTED_EDGE('',*,*,#7480,.T.);+#7480=EDGE_CURVE('',#7465,#7481,#7483,.T.);+#7481=VERTEX_POINT('',#7482);+#7482=CARTESIAN_POINT('',(-3.380247108853,6.86,0.206587955583));+#7483=LINE('',#7466,#3603);+#7484=ORIENTED_EDGE('',*,*,#7485,.T.);+#7485=EDGE_CURVE('',#7481,#7486,#7488,.T.);+#7486=VERTEX_POINT('',#7487);+#7487=CARTESIAN_POINT('',(-3.626449047106,6.86,5.551115123126E-17));+#7488=CIRCLE('',#7489,0.25);+#7489=AXIS2_PLACEMENT_3D('',#7490,#3612,#3613);+#7490=CARTESIAN_POINT('',(-3.626449047106,6.86,0.25));+#7491=ORIENTED_EDGE('',*,*,#7492,.T.);+#7492=EDGE_CURVE('',#7486,#7493,#7495,.T.);+#7493=VERTEX_POINT('',#7494);+#7494=CARTESIAN_POINT('',(-4.05,6.86,5.551115123126E-17));+#7495=LINE('',#7487,#768);+#7496=ORIENTED_EDGE('',*,*,#7497,.T.);+#7497=EDGE_CURVE('',#7493,#7498,#7500,.T.);+#7498=VERTEX_POINT('',#7499);+#7499=CARTESIAN_POINT('',(-4.05,6.86,0.15));+#7500=LINE('',#7494,#754);+#7501=ORIENTED_EDGE('',*,*,#7502,.T.);+#7502=EDGE_CURVE('',#7498,#7503,#7505,.T.);+#7503=VERTEX_POINT('',#7504);+#7504=CARTESIAN_POINT('',(-3.626449047106,6.86,0.15));+#7505=LINE('',#7499,#718);+#7506=ORIENTED_EDGE('',*,*,#7507,.T.);+#7507=EDGE_CURVE('',#7503,#7508,#7510,.T.);+#7508=VERTEX_POINT('',#7509);+#7509=CARTESIAN_POINT('',(-3.527968271805,6.86,0.232635182233));+#7510=CIRCLE('',#7511,0.1);+#7511=AXIS2_PLACEMENT_3D('',#7490,#3635,#3636);+#7512=ORIENTED_EDGE('',*,*,#7513,.T.);+#7513=EDGE_CURVE('',#7508,#7514,#7516,.T.);+#7514=VERTEX_POINT('',#7515);+#7515=CARTESIAN_POINT('',(-3.496201938253,6.86,0.443412044417));+#7516=LINE('',#7509,#3642);+#7517=ORIENTED_EDGE('',*,*,#7518,.T.);+#7518=EDGE_CURVE('',#7514,#3001,#7519,.T.);+#7519=CIRCLE('',#7520,0.25);+#7520=AXIS2_PLACEMENT_3D('',#7469,#3649,#3650);+#7521=PLANE('',#7522);+#7522=AXIS2_PLACEMENT_3D('',#7523,#781,#13);+#7523=CARTESIAN_POINT('',(-3.487377466565,6.86,0.305338822795));+#7524=ADVANCED_FACE('',(#7525),#7587,.F.);+#7525=FACE_BOUND('',#7526,.F.);+#7526=EDGE_LOOP('',(#7527,#7528,#7529,#7537,#7544,#7552,#7557,#7562,#7567,#7574,#7581,#7586));+#7527=ORIENTED_EDGE('',*,*,#1853,.F.);+#7528=ORIENTED_EDGE('',*,*,#1863,.T.);+#7529=ORIENTED_EDGE('',*,*,#7530,.T.);+#7530=EDGE_CURVE('',#1864,#7531,#7533,.T.);+#7531=VERTEX_POINT('',#7532);+#7532=CARTESIAN_POINT('',(3.348480775301,6.86,0.417364817767));+#7533=CIRCLE('',#7534,0.1);+#7534=AXIS2_PLACEMENT_3D('',#7535,#87,#7536);+#7535=CARTESIAN_POINT('',(3.25,6.86,0.4));+#7536=DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.));+#7537=ORIENTED_EDGE('',*,*,#7538,.T.);+#7538=EDGE_CURVE('',#7531,#7539,#7541,.T.);+#7539=VERTEX_POINT('',#7540);+#7540=CARTESIAN_POINT('',(3.380247108853,6.86,0.206587955583));+#7541=LINE('',#7532,#7542);+#7542=VECTOR('',#7543,1.);+#7543=DIRECTION('',(0.14902773993,1.654540281776E-17,-0.988833015595));+#7544=ORIENTED_EDGE('',*,*,#7545,.T.);+#7545=EDGE_CURVE('',#7539,#7546,#7548,.T.);+#7546=VERTEX_POINT('',#7547);+#7547=CARTESIAN_POINT('',(3.626449047106,6.86,5.551115123126E-17));+#7548=CIRCLE('',#7549,0.25);+#7549=AXIS2_PLACEMENT_3D('',#7550,#59,#7551);+#7550=CARTESIAN_POINT('',(3.626449047106,6.86,0.25));+#7551=DIRECTION('',(-0.984807753012,-1.093356242224E-16,-0.173648177667));+#7552=ORIENTED_EDGE('',*,*,#7553,.T.);+#7553=EDGE_CURVE('',#7546,#7554,#7556,.T.);+#7554=VERTEX_POINT('',#7555);+#7555=CARTESIAN_POINT('',(4.05,6.86,5.551115123126E-17));+#7556=LINE('',#7547,#27);+#7557=ORIENTED_EDGE('',*,*,#7558,.T.);+#7558=EDGE_CURVE('',#7554,#7559,#7561,.T.);+#7559=VERTEX_POINT('',#7560);+#7560=CARTESIAN_POINT('',(4.05,6.86,0.15));+#7561=LINE('',#7555,#754);+#7562=ORIENTED_EDGE('',*,*,#7563,.T.);+#7563=EDGE_CURVE('',#7559,#7564,#7566,.T.);+#7564=VERTEX_POINT('',#7565);+#7565=CARTESIAN_POINT('',(3.626449047106,6.86,0.15));+#7566=LINE('',#7560,#72);+#7567=ORIENTED_EDGE('',*,*,#7568,.T.);+#7568=EDGE_CURVE('',#7564,#7569,#7571,.T.);+#7569=VERTEX_POINT('',#7570);+#7570=CARTESIAN_POINT('',(3.527968271805,6.86,0.232635182233));+#7571=CIRCLE('',#7572,0.1);+#7572=AXIS2_PLACEMENT_3D('',#7550,#87,#7573);+#7573=DIRECTION('',(-4.440892098501E-15,-4.930380657631E-31,-1.));+#7574=ORIENTED_EDGE('',*,*,#7575,.T.);+#7575=EDGE_CURVE('',#7569,#7576,#7578,.T.);+#7576=VERTEX_POINT('',#7577);+#7577=CARTESIAN_POINT('',(3.496201938253,6.86,0.443412044417));+#7578=LINE('',#7570,#7579);+#7579=VECTOR('',#7580,1.);+#7580=DIRECTION('',(-0.14902773993,-1.654540281776E-17,0.988833015595));+#7581=ORIENTED_EDGE('',*,*,#7582,.T.);+#7582=EDGE_CURVE('',#7576,#3538,#7583,.T.);+#7583=CIRCLE('',#7584,0.25);+#7584=AXIS2_PLACEMENT_3D('',#7535,#59,#7585);+#7585=DIRECTION('',(0.984807753012,1.093356242224E-16,0.173648177667));+#7586=ORIENTED_EDGE('',*,*,#3537,.T.);+#7587=PLANE('',#7588);+#7588=AXIS2_PLACEMENT_3D('',#7589,#59,#13);+#7589=CARTESIAN_POINT('',(3.487377466565,6.86,0.305338822795));+#7590=ADVANCED_FACE('',(#7591),#7605,.F.);+#7591=FACE_BOUND('',#7592,.F.);+#7592=EDGE_LOOP('',(#7593,#7594,#7601,#7604));+#7593=ORIENTED_EDGE('',*,*,#1876,.T.);+#7594=ORIENTED_EDGE('',*,*,#7595,.T.);+#7595=EDGE_CURVE('',#1871,#7596,#7598,.T.);+#7596=VERTEX_POINT('',#7597);+#7597=CARTESIAN_POINT('',(3.348480775301,6.64,0.417364817767));+#7598=CIRCLE('',#7599,0.1);+#7599=AXIS2_PLACEMENT_3D('',#7600,#87,#7536);+#7600=CARTESIAN_POINT('',(3.25,6.64,0.4));+#7601=ORIENTED_EDGE('',*,*,#7602,.F.);+#7602=EDGE_CURVE('',#7531,#7596,#7603,.T.);+#7603=LINE('',#7532,#58);+#7604=ORIENTED_EDGE('',*,*,#7530,.F.);+#7605=CYLINDRICAL_SURFACE('',#7534,0.1);+#7606=ADVANCED_FACE('',(#7607),#7651,.T.);+#7607=FACE_BOUND('',#7608,.T.);+#7608=EDGE_LOOP('',(#1883,#1869,#7594,#7609,#7614,#7621,#7626,#7631,#7636,#7642,#7647,#3544));+#7609=ORIENTED_EDGE('',*,*,#7610,.T.);+#7610=EDGE_CURVE('',#7596,#7611,#7613,.T.);+#7611=VERTEX_POINT('',#7612);+#7612=CARTESIAN_POINT('',(3.380247108853,6.64,0.206587955583));+#7613=LINE('',#7597,#7542);+#7614=ORIENTED_EDGE('',*,*,#7615,.T.);+#7615=EDGE_CURVE('',#7611,#7616,#7618,.T.);+#7616=VERTEX_POINT('',#7617);+#7617=CARTESIAN_POINT('',(3.626449047106,6.64,5.551115123126E-17));+#7618=CIRCLE('',#7619,0.25);+#7619=AXIS2_PLACEMENT_3D('',#7620,#59,#7551);+#7620=CARTESIAN_POINT('',(3.626449047106,6.64,0.25));+#7621=ORIENTED_EDGE('',*,*,#7622,.T.);+#7622=EDGE_CURVE('',#7616,#7623,#7625,.T.);+#7623=VERTEX_POINT('',#7624);+#7624=CARTESIAN_POINT('',(4.05,6.64,5.551115123126E-17));+#7625=LINE('',#7617,#27);+#7626=ORIENTED_EDGE('',*,*,#7627,.T.);+#7627=EDGE_CURVE('',#7623,#7628,#7630,.T.);+#7628=VERTEX_POINT('',#7629);+#7629=CARTESIAN_POINT('',(4.05,6.64,0.15));+#7630=LINE('',#7624,#754);+#7631=ORIENTED_EDGE('',*,*,#7632,.T.);+#7632=EDGE_CURVE('',#7628,#7633,#7635,.T.);+#7633=VERTEX_POINT('',#7634);+#7634=CARTESIAN_POINT('',(3.626449047106,6.64,0.15));+#7635=LINE('',#7629,#72);+#7636=ORIENTED_EDGE('',*,*,#7637,.T.);+#7637=EDGE_CURVE('',#7633,#7638,#7640,.T.);+#7638=VERTEX_POINT('',#7639);+#7639=CARTESIAN_POINT('',(3.527968271805,6.64,0.232635182233));+#7640=CIRCLE('',#7641,0.1);+#7641=AXIS2_PLACEMENT_3D('',#7620,#87,#7573);+#7642=ORIENTED_EDGE('',*,*,#7643,.T.);+#7643=EDGE_CURVE('',#7638,#7644,#7646,.T.);+#7644=VERTEX_POINT('',#7645);+#7645=CARTESIAN_POINT('',(3.496201938253,6.64,0.443412044417));+#7646=LINE('',#7639,#7579);+#7647=ORIENTED_EDGE('',*,*,#7648,.T.);+#7648=EDGE_CURVE('',#7644,#3541,#7649,.T.);+#7649=CIRCLE('',#7650,0.25);+#7650=AXIS2_PLACEMENT_3D('',#7600,#59,#7585);+#7651=PLANE('',#7652);+#7652=AXIS2_PLACEMENT_3D('',#7653,#59,#13);+#7653=CARTESIAN_POINT('',(3.487377466565,6.64,0.305338822795));+#7654=ADVANCED_FACE('',(#7655),#724,.F.);+#7655=FACE_BOUND('',#7656,.F.);+#7656=EDGE_LOOP('',(#7657,#7658,#7659,#7663));+#7657=ORIENTED_EDGE('',*,*,#3548,.F.);+#7658=ORIENTED_EDGE('',*,*,#1897,.T.);+#7659=ORIENTED_EDGE('',*,*,#7660,.T.);+#7660=EDGE_CURVE('',#1892,#3305,#7661,.T.);+#7661=LINE('',#7662,#72);+#7662=CARTESIAN_POINT('',(3.25,6.36,0.65));+#7663=ORIENTED_EDGE('',*,*,#3304,.F.);+#7664=ADVANCED_FACE('',(#7665),#7721,.F.);+#7665=FACE_BOUND('',#7666,.F.);+#7666=EDGE_LOOP('',(#7667,#7668,#7669,#7676,#7681,#7688,#7693,#7698,#7703,#7709,#7714,#7719));+#7667=ORIENTED_EDGE('',*,*,#1891,.F.);+#7668=ORIENTED_EDGE('',*,*,#1902,.T.);+#7669=ORIENTED_EDGE('',*,*,#7670,.T.);+#7670=EDGE_CURVE('',#1903,#7671,#7673,.T.);+#7671=VERTEX_POINT('',#7672);+#7672=CARTESIAN_POINT('',(3.348480775301,6.36,0.417364817767));+#7673=CIRCLE('',#7674,0.1);+#7674=AXIS2_PLACEMENT_3D('',#7675,#87,#7536);+#7675=CARTESIAN_POINT('',(3.25,6.36,0.4));+#7676=ORIENTED_EDGE('',*,*,#7677,.T.);+#7677=EDGE_CURVE('',#7671,#7678,#7680,.T.);+#7678=VERTEX_POINT('',#7679);+#7679=CARTESIAN_POINT('',(3.380247108853,6.36,0.206587955583));+#7680=LINE('',#7672,#7542);+#7681=ORIENTED_EDGE('',*,*,#7682,.T.);+#7682=EDGE_CURVE('',#7678,#7683,#7685,.T.);+#7683=VERTEX_POINT('',#7684);+#7684=CARTESIAN_POINT('',(3.626449047106,6.36,5.551115123126E-17));+#7685=CIRCLE('',#7686,0.25);+#7686=AXIS2_PLACEMENT_3D('',#7687,#59,#7551);+#7687=CARTESIAN_POINT('',(3.626449047106,6.36,0.25));+#7688=ORIENTED_EDGE('',*,*,#7689,.T.);+#7689=EDGE_CURVE('',#7683,#7690,#7692,.T.);+#7690=VERTEX_POINT('',#7691);+#7691=CARTESIAN_POINT('',(4.05,6.36,5.551115123126E-17));+#7692=LINE('',#7684,#27);+#7693=ORIENTED_EDGE('',*,*,#7694,.T.);+#7694=EDGE_CURVE('',#7690,#7695,#7697,.T.);+#7695=VERTEX_POINT('',#7696);+#7696=CARTESIAN_POINT('',(4.05,6.36,0.15));+#7697=LINE('',#7691,#754);+#7698=ORIENTED_EDGE('',*,*,#7699,.T.);+#7699=EDGE_CURVE('',#7695,#7700,#7702,.T.);+#7700=VERTEX_POINT('',#7701);+#7701=CARTESIAN_POINT('',(3.626449047106,6.36,0.15));+#7702=LINE('',#7696,#72);+#7703=ORIENTED_EDGE('',*,*,#7704,.T.);+#7704=EDGE_CURVE('',#7700,#7705,#7707,.T.);+#7705=VERTEX_POINT('',#7706);+#7706=CARTESIAN_POINT('',(3.527968271805,6.36,0.232635182233));+#7707=CIRCLE('',#7708,0.1);+#7708=AXIS2_PLACEMENT_3D('',#7687,#87,#7573);+#7709=ORIENTED_EDGE('',*,*,#7710,.T.);+#7710=EDGE_CURVE('',#7705,#7711,#7713,.T.);+#7711=VERTEX_POINT('',#7712);+#7712=CARTESIAN_POINT('',(3.496201938253,6.36,0.443412044417));+#7713=LINE('',#7706,#7579);+#7714=ORIENTED_EDGE('',*,*,#7715,.T.);+#7715=EDGE_CURVE('',#7711,#7716,#7717,.T.);+#7716=VERTEX_POINT('',#7662);+#7717=CIRCLE('',#7718,0.25);+#7718=AXIS2_PLACEMENT_3D('',#7675,#59,#7585);+#7719=ORIENTED_EDGE('',*,*,#7720,.T.);+#7720=EDGE_CURVE('',#7716,#1892,#7661,.T.);+#7721=PLANE('',#7722);+#7722=AXIS2_PLACEMENT_3D('',#7723,#59,#13);+#7723=CARTESIAN_POINT('',(3.487377466565,6.36,0.305338822795));+#7724=ADVANCED_FACE('',(#7725),#7739,.F.);+#7725=FACE_BOUND('',#7726,.F.);+#7726=EDGE_LOOP('',(#7727,#7728,#7735,#7738));+#7727=ORIENTED_EDGE('',*,*,#1915,.T.);+#7728=ORIENTED_EDGE('',*,*,#7729,.T.);+#7729=EDGE_CURVE('',#1910,#7730,#7732,.T.);+#7730=VERTEX_POINT('',#7731);+#7731=CARTESIAN_POINT('',(3.348480775301,6.14,0.417364817767));+#7732=CIRCLE('',#7733,0.1);+#7733=AXIS2_PLACEMENT_3D('',#7734,#87,#7536);+#7734=CARTESIAN_POINT('',(3.25,6.14,0.4));+#7735=ORIENTED_EDGE('',*,*,#7736,.F.);+#7736=EDGE_CURVE('',#7671,#7730,#7737,.T.);+#7737=LINE('',#7672,#58);+#7738=ORIENTED_EDGE('',*,*,#7670,.F.);+#7739=CYLINDRICAL_SURFACE('',#7674,0.1);+#7740=ADVANCED_FACE('',(#7741),#7790,.T.);+#7741=FACE_BOUND('',#7742,.T.);+#7742=EDGE_LOOP('',(#1922,#1908,#7728,#7743,#7748,#7755,#7760,#7765,#7770,#7776,#7781,#7787));+#7743=ORIENTED_EDGE('',*,*,#7744,.T.);+#7744=EDGE_CURVE('',#7730,#7745,#7747,.T.);+#7745=VERTEX_POINT('',#7746);+#7746=CARTESIAN_POINT('',(3.380247108853,6.14,0.206587955583));+#7747=LINE('',#7731,#7542);+#7748=ORIENTED_EDGE('',*,*,#7749,.T.);+#7749=EDGE_CURVE('',#7745,#7750,#7752,.T.);+#7750=VERTEX_POINT('',#7751);+#7751=CARTESIAN_POINT('',(3.626449047106,6.14,5.551115123126E-17));+#7752=CIRCLE('',#7753,0.25);+#7753=AXIS2_PLACEMENT_3D('',#7754,#59,#7551);+#7754=CARTESIAN_POINT('',(3.626449047106,6.14,0.25));+#7755=ORIENTED_EDGE('',*,*,#7756,.T.);+#7756=EDGE_CURVE('',#7750,#7757,#7759,.T.);+#7757=VERTEX_POINT('',#7758);+#7758=CARTESIAN_POINT('',(4.05,6.14,5.551115123126E-17));+#7759=LINE('',#7751,#27);+#7760=ORIENTED_EDGE('',*,*,#7761,.T.);+#7761=EDGE_CURVE('',#7757,#7762,#7764,.T.);+#7762=VERTEX_POINT('',#7763);+#7763=CARTESIAN_POINT('',(4.05,6.14,0.15));+#7764=LINE('',#7758,#754);+#7765=ORIENTED_EDGE('',*,*,#7766,.T.);+#7766=EDGE_CURVE('',#7762,#7767,#7769,.T.);+#7767=VERTEX_POINT('',#7768);+#7768=CARTESIAN_POINT('',(3.626449047106,6.14,0.15));+#7769=LINE('',#7763,#72);+#7770=ORIENTED_EDGE('',*,*,#7771,.T.);+#7771=EDGE_CURVE('',#7767,#7772,#7774,.T.);+#7772=VERTEX_POINT('',#7773);+#7773=CARTESIAN_POINT('',(3.527968271805,6.14,0.232635182233));+#7774=CIRCLE('',#7775,0.1);+#7775=AXIS2_PLACEMENT_3D('',#7754,#87,#7573);+#7776=ORIENTED_EDGE('',*,*,#7777,.T.);+#7777=EDGE_CURVE('',#7772,#7778,#7780,.T.);+#7778=VERTEX_POINT('',#7779);+#7779=CARTESIAN_POINT('',(3.496201938253,6.14,0.443412044417));+#7780=LINE('',#7773,#7579);+#7781=ORIENTED_EDGE('',*,*,#7782,.T.);+#7782=EDGE_CURVE('',#7778,#7783,#7785,.T.);+#7783=VERTEX_POINT('',#7784);+#7784=CARTESIAN_POINT('',(3.25,6.14,0.65));+#7785=CIRCLE('',#7786,0.25);+#7786=AXIS2_PLACEMENT_3D('',#7734,#59,#7585);+#7787=ORIENTED_EDGE('',*,*,#7788,.T.);+#7788=EDGE_CURVE('',#7783,#1924,#7789,.T.);+#7789=LINE('',#7784,#72);+#7790=PLANE('',#7791);+#7791=AXIS2_PLACEMENT_3D('',#7792,#59,#13);+#7792=CARTESIAN_POINT('',(3.487377466565,6.14,0.305338822795));+#7793=ADVANCED_FACE('',(#7794),#724,.F.);+#7794=FACE_BOUND('',#7795,.F.);+#7795=EDGE_LOOP('',(#7796,#7798,#7799,#7803));+#7796=ORIENTED_EDGE('',*,*,#7797,.F.);+#7797=EDGE_CURVE('',#1924,#3309,#7789,.T.);+#7798=ORIENTED_EDGE('',*,*,#1936,.T.);+#7799=ORIENTED_EDGE('',*,*,#7800,.T.);+#7800=EDGE_CURVE('',#1931,#3313,#7801,.T.);+#7801=LINE('',#7802,#72);+#7802=CARTESIAN_POINT('',(3.25,5.86,0.65));+#7803=ORIENTED_EDGE('',*,*,#3312,.F.);+#7804=ADVANCED_FACE('',(#7805),#7861,.F.);+#7805=FACE_BOUND('',#7806,.F.);+#7806=EDGE_LOOP('',(#7807,#7808,#7809,#7816,#7821,#7828,#7833,#7838,#7843,#7849,#7854,#7859));+#7807=ORIENTED_EDGE('',*,*,#1930,.F.);+#7808=ORIENTED_EDGE('',*,*,#1941,.T.);+#7809=ORIENTED_EDGE('',*,*,#7810,.T.);+#7810=EDGE_CURVE('',#1942,#7811,#7813,.T.);+#7811=VERTEX_POINT('',#7812);+#7812=CARTESIAN_POINT('',(3.348480775301,5.86,0.417364817767));+#7813=CIRCLE('',#7814,0.1);+#7814=AXIS2_PLACEMENT_3D('',#7815,#87,#7536);+#7815=CARTESIAN_POINT('',(3.25,5.86,0.4));+#7816=ORIENTED_EDGE('',*,*,#7817,.T.);+#7817=EDGE_CURVE('',#7811,#7818,#7820,.T.);+#7818=VERTEX_POINT('',#7819);+#7819=CARTESIAN_POINT('',(3.380247108853,5.86,0.206587955583));+#7820=LINE('',#7812,#7542);+#7821=ORIENTED_EDGE('',*,*,#7822,.T.);+#7822=EDGE_CURVE('',#7818,#7823,#7825,.T.);+#7823=VERTEX_POINT('',#7824);+#7824=CARTESIAN_POINT('',(3.626449047106,5.86,5.551115123126E-17));+#7825=CIRCLE('',#7826,0.25);+#7826=AXIS2_PLACEMENT_3D('',#7827,#59,#7551);+#7827=CARTESIAN_POINT('',(3.626449047106,5.86,0.25));+#7828=ORIENTED_EDGE('',*,*,#7829,.T.);+#7829=EDGE_CURVE('',#7823,#7830,#7832,.T.);+#7830=VERTEX_POINT('',#7831);+#7831=CARTESIAN_POINT('',(4.05,5.86,5.551115123126E-17));+#7832=LINE('',#7824,#27);+#7833=ORIENTED_EDGE('',*,*,#7834,.T.);+#7834=EDGE_CURVE('',#7830,#7835,#7837,.T.);+#7835=VERTEX_POINT('',#7836);+#7836=CARTESIAN_POINT('',(4.05,5.86,0.15));+#7837=LINE('',#7831,#754);+#7838=ORIENTED_EDGE('',*,*,#7839,.T.);+#7839=EDGE_CURVE('',#7835,#7840,#7842,.T.);+#7840=VERTEX_POINT('',#7841);+#7841=CARTESIAN_POINT('',(3.626449047106,5.86,0.15));+#7842=LINE('',#7836,#72);+#7843=ORIENTED_EDGE('',*,*,#7844,.T.);+#7844=EDGE_CURVE('',#7840,#7845,#7847,.T.);+#7845=VERTEX_POINT('',#7846);+#7846=CARTESIAN_POINT('',(3.527968271805,5.86,0.232635182233));+#7847=CIRCLE('',#7848,0.1);+#7848=AXIS2_PLACEMENT_3D('',#7827,#87,#7573);+#7849=ORIENTED_EDGE('',*,*,#7850,.T.);+#7850=EDGE_CURVE('',#7845,#7851,#7853,.T.);+#7851=VERTEX_POINT('',#7852);+#7852=CARTESIAN_POINT('',(3.496201938253,5.86,0.443412044417));+#7853=LINE('',#7846,#7579);+#7854=ORIENTED_EDGE('',*,*,#7855,.T.);+#7855=EDGE_CURVE('',#7851,#7856,#7857,.T.);+#7856=VERTEX_POINT('',#7802);+#7857=CIRCLE('',#7858,0.25);+#7858=AXIS2_PLACEMENT_3D('',#7815,#59,#7585);+#7859=ORIENTED_EDGE('',*,*,#7860,.T.);+#7860=EDGE_CURVE('',#7856,#1931,#7801,.T.);+#7861=PLANE('',#7862);+#7862=AXIS2_PLACEMENT_3D('',#7863,#59,#13);+#7863=CARTESIAN_POINT('',(3.487377466565,5.86,0.305338822795));+#7864=ADVANCED_FACE('',(#7865),#7879,.F.);+#7865=FACE_BOUND('',#7866,.F.);+#7866=EDGE_LOOP('',(#7867,#7868,#7875,#7878));+#7867=ORIENTED_EDGE('',*,*,#1954,.T.);+#7868=ORIENTED_EDGE('',*,*,#7869,.T.);+#7869=EDGE_CURVE('',#1949,#7870,#7872,.T.);+#7870=VERTEX_POINT('',#7871);+#7871=CARTESIAN_POINT('',(3.348480775301,5.64,0.417364817767));+#7872=CIRCLE('',#7873,0.1);+#7873=AXIS2_PLACEMENT_3D('',#7874,#87,#7536);+#7874=CARTESIAN_POINT('',(3.25,5.64,0.4));+#7875=ORIENTED_EDGE('',*,*,#7876,.F.);+#7876=EDGE_CURVE('',#7811,#7870,#7877,.T.);+#7877=LINE('',#7812,#58);+#7878=ORIENTED_EDGE('',*,*,#7810,.F.);+#7879=CYLINDRICAL_SURFACE('',#7814,0.1);+#7880=ADVANCED_FACE('',(#7881),#7930,.T.);+#7881=FACE_BOUND('',#7882,.T.);+#7882=EDGE_LOOP('',(#1961,#1947,#7868,#7883,#7888,#7895,#7900,#7905,#7910,#7916,#7921,#7927));+#7883=ORIENTED_EDGE('',*,*,#7884,.T.);+#7884=EDGE_CURVE('',#7870,#7885,#7887,.T.);+#7885=VERTEX_POINT('',#7886);+#7886=CARTESIAN_POINT('',(3.380247108853,5.64,0.206587955583));+#7887=LINE('',#7871,#7542);+#7888=ORIENTED_EDGE('',*,*,#7889,.T.);+#7889=EDGE_CURVE('',#7885,#7890,#7892,.T.);+#7890=VERTEX_POINT('',#7891);+#7891=CARTESIAN_POINT('',(3.626449047106,5.64,5.551115123126E-17));+#7892=CIRCLE('',#7893,0.25);+#7893=AXIS2_PLACEMENT_3D('',#7894,#59,#7551);+#7894=CARTESIAN_POINT('',(3.626449047106,5.64,0.25));+#7895=ORIENTED_EDGE('',*,*,#7896,.T.);+#7896=EDGE_CURVE('',#7890,#7897,#7899,.T.);+#7897=VERTEX_POINT('',#7898);+#7898=CARTESIAN_POINT('',(4.05,5.64,5.551115123126E-17));+#7899=LINE('',#7891,#27);+#7900=ORIENTED_EDGE('',*,*,#7901,.T.);+#7901=EDGE_CURVE('',#7897,#7902,#7904,.T.);+#7902=VERTEX_POINT('',#7903);+#7903=CARTESIAN_POINT('',(4.05,5.64,0.15));+#7904=LINE('',#7898,#754);+#7905=ORIENTED_EDGE('',*,*,#7906,.T.);+#7906=EDGE_CURVE('',#7902,#7907,#7909,.T.);+#7907=VERTEX_POINT('',#7908);+#7908=CARTESIAN_POINT('',(3.626449047106,5.64,0.15));+#7909=LINE('',#7903,#72);+#7910=ORIENTED_EDGE('',*,*,#7911,.T.);+#7911=EDGE_CURVE('',#7907,#7912,#7914,.T.);+#7912=VERTEX_POINT('',#7913);+#7913=CARTESIAN_POINT('',(3.527968271805,5.64,0.232635182233));+#7914=CIRCLE('',#7915,0.1);+#7915=AXIS2_PLACEMENT_3D('',#7894,#87,#7573);+#7916=ORIENTED_EDGE('',*,*,#7917,.T.);+#7917=EDGE_CURVE('',#7912,#7918,#7920,.T.);+#7918=VERTEX_POINT('',#7919);+#7919=CARTESIAN_POINT('',(3.496201938253,5.64,0.443412044417));+#7920=LINE('',#7913,#7579);+#7921=ORIENTED_EDGE('',*,*,#7922,.T.);+#7922=EDGE_CURVE('',#7918,#7923,#7925,.T.);+#7923=VERTEX_POINT('',#7924);+#7924=CARTESIAN_POINT('',(3.25,5.64,0.65));+#7925=CIRCLE('',#7926,0.25);+#7926=AXIS2_PLACEMENT_3D('',#7874,#59,#7585);+#7927=ORIENTED_EDGE('',*,*,#7928,.T.);+#7928=EDGE_CURVE('',#7923,#1963,#7929,.T.);+#7929=LINE('',#7924,#72);+#7930=PLANE('',#7931);+#7931=AXIS2_PLACEMENT_3D('',#7932,#59,#13);+#7932=CARTESIAN_POINT('',(3.487377466565,5.64,0.305338822795));+#7933=ADVANCED_FACE('',(#7934),#724,.F.);+#7934=FACE_BOUND('',#7935,.F.);+#7935=EDGE_LOOP('',(#7936,#7938,#7939,#7943));+#7936=ORIENTED_EDGE('',*,*,#7937,.F.);+#7937=EDGE_CURVE('',#1963,#3317,#7929,.T.);+#7938=ORIENTED_EDGE('',*,*,#1975,.T.);+#7939=ORIENTED_EDGE('',*,*,#7940,.T.);+#7940=EDGE_CURVE('',#1970,#3321,#7941,.T.);+#7941=LINE('',#7942,#72);+#7942=CARTESIAN_POINT('',(3.25,5.36,0.65));+#7943=ORIENTED_EDGE('',*,*,#3320,.F.);+#7944=ADVANCED_FACE('',(#7945),#8001,.F.);+#7945=FACE_BOUND('',#7946,.F.);+#7946=EDGE_LOOP('',(#7947,#7948,#7949,#7956,#7961,#7968,#7973,#7978,#7983,#7989,#7994,#7999));+#7947=ORIENTED_EDGE('',*,*,#1969,.F.);+#7948=ORIENTED_EDGE('',*,*,#1980,.T.);+#7949=ORIENTED_EDGE('',*,*,#7950,.T.);+#7950=EDGE_CURVE('',#1981,#7951,#7953,.T.);+#7951=VERTEX_POINT('',#7952);+#7952=CARTESIAN_POINT('',(3.348480775301,5.36,0.417364817767));+#7953=CIRCLE('',#7954,0.1);+#7954=AXIS2_PLACEMENT_3D('',#7955,#87,#7536);+#7955=CARTESIAN_POINT('',(3.25,5.36,0.4));+#7956=ORIENTED_EDGE('',*,*,#7957,.T.);+#7957=EDGE_CURVE('',#7951,#7958,#7960,.T.);+#7958=VERTEX_POINT('',#7959);+#7959=CARTESIAN_POINT('',(3.380247108853,5.36,0.206587955583));+#7960=LINE('',#7952,#7542);+#7961=ORIENTED_EDGE('',*,*,#7962,.T.);+#7962=EDGE_CURVE('',#7958,#7963,#7965,.T.);+#7963=VERTEX_POINT('',#7964);+#7964=CARTESIAN_POINT('',(3.626449047106,5.36,5.551115123126E-17));+#7965=CIRCLE('',#7966,0.25);+#7966=AXIS2_PLACEMENT_3D('',#7967,#59,#7551);+#7967=CARTESIAN_POINT('',(3.626449047106,5.36,0.25));+#7968=ORIENTED_EDGE('',*,*,#7969,.T.);+#7969=EDGE_CURVE('',#7963,#7970,#7972,.T.);+#7970=VERTEX_POINT('',#7971);+#7971=CARTESIAN_POINT('',(4.05,5.36,5.551115123126E-17));+#7972=LINE('',#7964,#27);+#7973=ORIENTED_EDGE('',*,*,#7974,.T.);+#7974=EDGE_CURVE('',#7970,#7975,#7977,.T.);+#7975=VERTEX_POINT('',#7976);+#7976=CARTESIAN_POINT('',(4.05,5.36,0.15));+#7977=LINE('',#7971,#754);+#7978=ORIENTED_EDGE('',*,*,#7979,.T.);+#7979=EDGE_CURVE('',#7975,#7980,#7982,.T.);+#7980=VERTEX_POINT('',#7981);+#7981=CARTESIAN_POINT('',(3.626449047106,5.36,0.15));+#7982=LINE('',#7976,#72);+#7983=ORIENTED_EDGE('',*,*,#7984,.T.);+#7984=EDGE_CURVE('',#7980,#7985,#7987,.T.);+#7985=VERTEX_POINT('',#7986);+#7986=CARTESIAN_POINT('',(3.527968271805,5.36,0.232635182233));+#7987=CIRCLE('',#7988,0.1);+#7988=AXIS2_PLACEMENT_3D('',#7967,#87,#7573);+#7989=ORIENTED_EDGE('',*,*,#7990,.T.);+#7990=EDGE_CURVE('',#7985,#7991,#7993,.T.);+#7991=VERTEX_POINT('',#7992);+#7992=CARTESIAN_POINT('',(3.496201938253,5.36,0.443412044417));+#7993=LINE('',#7986,#7579);+#7994=ORIENTED_EDGE('',*,*,#7995,.T.);+#7995=EDGE_CURVE('',#7991,#7996,#7997,.T.);+#7996=VERTEX_POINT('',#7942);+#7997=CIRCLE('',#7998,0.25);+#7998=AXIS2_PLACEMENT_3D('',#7955,#59,#7585);+#7999=ORIENTED_EDGE('',*,*,#8000,.T.);+#8000=EDGE_CURVE('',#7996,#1970,#7941,.T.);+#8001=PLANE('',#8002);+#8002=AXIS2_PLACEMENT_3D('',#8003,#59,#13);+#8003=CARTESIAN_POINT('',(3.487377466565,5.36,0.305338822795));+#8004=ADVANCED_FACE('',(#8005),#8019,.F.);+#8005=FACE_BOUND('',#8006,.F.);+#8006=EDGE_LOOP('',(#8007,#8008,#8015,#8018));+#8007=ORIENTED_EDGE('',*,*,#1993,.T.);+#8008=ORIENTED_EDGE('',*,*,#8009,.T.);+#8009=EDGE_CURVE('',#1988,#8010,#8012,.T.);+#8010=VERTEX_POINT('',#8011);+#8011=CARTESIAN_POINT('',(3.348480775301,5.14,0.417364817767));+#8012=CIRCLE('',#8013,0.1);+#8013=AXIS2_PLACEMENT_3D('',#8014,#87,#7536);+#8014=CARTESIAN_POINT('',(3.25,5.14,0.4));+#8015=ORIENTED_EDGE('',*,*,#8016,.F.);+#8016=EDGE_CURVE('',#7951,#8010,#8017,.T.);+#8017=LINE('',#7952,#58);+#8018=ORIENTED_EDGE('',*,*,#7950,.F.);+#8019=CYLINDRICAL_SURFACE('',#7954,0.1);+#8020=ADVANCED_FACE('',(#8021),#8070,.T.);+#8021=FACE_BOUND('',#8022,.T.);+#8022=EDGE_LOOP('',(#2000,#1986,#8008,#8023,#8028,#8035,#8040,#8045,#8050,#8056,#8061,#8067));+#8023=ORIENTED_EDGE('',*,*,#8024,.T.);+#8024=EDGE_CURVE('',#8010,#8025,#8027,.T.);+#8025=VERTEX_POINT('',#8026);+#8026=CARTESIAN_POINT('',(3.380247108853,5.14,0.206587955583));+#8027=LINE('',#8011,#7542);+#8028=ORIENTED_EDGE('',*,*,#8029,.T.);+#8029=EDGE_CURVE('',#8025,#8030,#8032,.T.);+#8030=VERTEX_POINT('',#8031);+#8031=CARTESIAN_POINT('',(3.626449047106,5.14,5.551115123126E-17));+#8032=CIRCLE('',#8033,0.25);+#8033=AXIS2_PLACEMENT_3D('',#8034,#59,#7551);+#8034=CARTESIAN_POINT('',(3.626449047106,5.14,0.25));+#8035=ORIENTED_EDGE('',*,*,#8036,.T.);+#8036=EDGE_CURVE('',#8030,#8037,#8039,.T.);+#8037=VERTEX_POINT('',#8038);+#8038=CARTESIAN_POINT('',(4.05,5.14,5.551115123126E-17));+#8039=LINE('',#8031,#27);+#8040=ORIENTED_EDGE('',*,*,#8041,.T.);+#8041=EDGE_CURVE('',#8037,#8042,#8044,.T.);+#8042=VERTEX_POINT('',#8043);+#8043=CARTESIAN_POINT('',(4.05,5.14,0.15));+#8044=LINE('',#8038,#754);+#8045=ORIENTED_EDGE('',*,*,#8046,.T.);+#8046=EDGE_CURVE('',#8042,#8047,#8049,.T.);+#8047=VERTEX_POINT('',#8048);+#8048=CARTESIAN_POINT('',(3.626449047106,5.14,0.15));+#8049=LINE('',#8043,#72);+#8050=ORIENTED_EDGE('',*,*,#8051,.T.);+#8051=EDGE_CURVE('',#8047,#8052,#8054,.T.);+#8052=VERTEX_POINT('',#8053);+#8053=CARTESIAN_POINT('',(3.527968271805,5.14,0.232635182233));+#8054=CIRCLE('',#8055,0.1);+#8055=AXIS2_PLACEMENT_3D('',#8034,#87,#7573);+#8056=ORIENTED_EDGE('',*,*,#8057,.T.);+#8057=EDGE_CURVE('',#8052,#8058,#8060,.T.);+#8058=VERTEX_POINT('',#8059);+#8059=CARTESIAN_POINT('',(3.496201938253,5.14,0.443412044417));+#8060=LINE('',#8053,#7579);+#8061=ORIENTED_EDGE('',*,*,#8062,.T.);+#8062=EDGE_CURVE('',#8058,#8063,#8065,.T.);+#8063=VERTEX_POINT('',#8064);+#8064=CARTESIAN_POINT('',(3.25,5.14,0.65));+#8065=CIRCLE('',#8066,0.25);+#8066=AXIS2_PLACEMENT_3D('',#8014,#59,#7585);+#8067=ORIENTED_EDGE('',*,*,#8068,.T.);+#8068=EDGE_CURVE('',#8063,#2002,#8069,.T.);+#8069=LINE('',#8064,#72);+#8070=PLANE('',#8071);+#8071=AXIS2_PLACEMENT_3D('',#8072,#59,#13);+#8072=CARTESIAN_POINT('',(3.487377466565,5.14,0.305338822795));+#8073=ADVANCED_FACE('',(#8074),#724,.F.);+#8074=FACE_BOUND('',#8075,.F.);+#8075=EDGE_LOOP('',(#8076,#8078,#8079,#8083));+#8076=ORIENTED_EDGE('',*,*,#8077,.F.);+#8077=EDGE_CURVE('',#2002,#3325,#8069,.T.);+#8078=ORIENTED_EDGE('',*,*,#2014,.T.);+#8079=ORIENTED_EDGE('',*,*,#8080,.T.);+#8080=EDGE_CURVE('',#2009,#3329,#8081,.T.);+#8081=LINE('',#8082,#72);+#8082=CARTESIAN_POINT('',(3.25,4.86,0.65));+#8083=ORIENTED_EDGE('',*,*,#3328,.F.);+#8084=ADVANCED_FACE('',(#8085),#8141,.F.);+#8085=FACE_BOUND('',#8086,.F.);+#8086=EDGE_LOOP('',(#8087,#8088,#8089,#8096,#8101,#8108,#8113,#8118,#8123,#8129,#8134,#8139));+#8087=ORIENTED_EDGE('',*,*,#2008,.F.);+#8088=ORIENTED_EDGE('',*,*,#2019,.T.);+#8089=ORIENTED_EDGE('',*,*,#8090,.T.);+#8090=EDGE_CURVE('',#2020,#8091,#8093,.T.);+#8091=VERTEX_POINT('',#8092);+#8092=CARTESIAN_POINT('',(3.348480775301,4.86,0.417364817767));+#8093=CIRCLE('',#8094,0.1);+#8094=AXIS2_PLACEMENT_3D('',#8095,#87,#7536);+#8095=CARTESIAN_POINT('',(3.25,4.86,0.4));+#8096=ORIENTED_EDGE('',*,*,#8097,.T.);+#8097=EDGE_CURVE('',#8091,#8098,#8100,.T.);+#8098=VERTEX_POINT('',#8099);+#8099=CARTESIAN_POINT('',(3.380247108853,4.86,0.206587955583));+#8100=LINE('',#8092,#7542);+#8101=ORIENTED_EDGE('',*,*,#8102,.T.);+#8102=EDGE_CURVE('',#8098,#8103,#8105,.T.);+#8103=VERTEX_POINT('',#8104);+#8104=CARTESIAN_POINT('',(3.626449047106,4.86,5.551115123126E-17));+#8105=CIRCLE('',#8106,0.25);+#8106=AXIS2_PLACEMENT_3D('',#8107,#59,#7551);+#8107=CARTESIAN_POINT('',(3.626449047106,4.86,0.25));+#8108=ORIENTED_EDGE('',*,*,#8109,.T.);+#8109=EDGE_CURVE('',#8103,#8110,#8112,.T.);+#8110=VERTEX_POINT('',#8111);+#8111=CARTESIAN_POINT('',(4.05,4.86,5.551115123126E-17));+#8112=LINE('',#8104,#27);+#8113=ORIENTED_EDGE('',*,*,#8114,.T.);+#8114=EDGE_CURVE('',#8110,#8115,#8117,.T.);+#8115=VERTEX_POINT('',#8116);+#8116=CARTESIAN_POINT('',(4.05,4.86,0.15));+#8117=LINE('',#8111,#754);+#8118=ORIENTED_EDGE('',*,*,#8119,.T.);+#8119=EDGE_CURVE('',#8115,#8120,#8122,.T.);+#8120=VERTEX_POINT('',#8121);+#8121=CARTESIAN_POINT('',(3.626449047106,4.86,0.15));+#8122=LINE('',#8116,#72);+#8123=ORIENTED_EDGE('',*,*,#8124,.T.);+#8124=EDGE_CURVE('',#8120,#8125,#8127,.T.);+#8125=VERTEX_POINT('',#8126);+#8126=CARTESIAN_POINT('',(3.527968271805,4.86,0.232635182233));+#8127=CIRCLE('',#8128,0.1);+#8128=AXIS2_PLACEMENT_3D('',#8107,#87,#7573);+#8129=ORIENTED_EDGE('',*,*,#8130,.T.);+#8130=EDGE_CURVE('',#8125,#8131,#8133,.T.);+#8131=VERTEX_POINT('',#8132);+#8132=CARTESIAN_POINT('',(3.496201938253,4.86,0.443412044417));+#8133=LINE('',#8126,#7579);+#8134=ORIENTED_EDGE('',*,*,#8135,.T.);+#8135=EDGE_CURVE('',#8131,#8136,#8137,.T.);+#8136=VERTEX_POINT('',#8082);+#8137=CIRCLE('',#8138,0.25);+#8138=AXIS2_PLACEMENT_3D('',#8095,#59,#7585);+#8139=ORIENTED_EDGE('',*,*,#8140,.T.);+#8140=EDGE_CURVE('',#8136,#2009,#8081,.T.);+#8141=PLANE('',#8142);+#8142=AXIS2_PLACEMENT_3D('',#8143,#59,#13);+#8143=CARTESIAN_POINT('',(3.487377466565,4.86,0.305338822795));+#8144=ADVANCED_FACE('',(#8145),#8159,.F.);+#8145=FACE_BOUND('',#8146,.F.);+#8146=EDGE_LOOP('',(#8147,#8148,#8155,#8158));+#8147=ORIENTED_EDGE('',*,*,#2032,.T.);+#8148=ORIENTED_EDGE('',*,*,#8149,.T.);+#8149=EDGE_CURVE('',#2027,#8150,#8152,.T.);+#8150=VERTEX_POINT('',#8151);+#8151=CARTESIAN_POINT('',(3.348480775301,4.64,0.417364817767));+#8152=CIRCLE('',#8153,0.1);+#8153=AXIS2_PLACEMENT_3D('',#8154,#87,#7536);+#8154=CARTESIAN_POINT('',(3.25,4.64,0.4));+#8155=ORIENTED_EDGE('',*,*,#8156,.F.);+#8156=EDGE_CURVE('',#8091,#8150,#8157,.T.);+#8157=LINE('',#8092,#58);+#8158=ORIENTED_EDGE('',*,*,#8090,.F.);+#8159=CYLINDRICAL_SURFACE('',#8094,0.1);+#8160=ADVANCED_FACE('',(#8161),#8210,.T.);+#8161=FACE_BOUND('',#8162,.T.);+#8162=EDGE_LOOP('',(#2039,#2025,#8148,#8163,#8168,#8175,#8180,#8185,#8190,#8196,#8201,#8207));+#8163=ORIENTED_EDGE('',*,*,#8164,.T.);+#8164=EDGE_CURVE('',#8150,#8165,#8167,.T.);+#8165=VERTEX_POINT('',#8166);+#8166=CARTESIAN_POINT('',(3.380247108853,4.64,0.206587955583));+#8167=LINE('',#8151,#7542);+#8168=ORIENTED_EDGE('',*,*,#8169,.T.);+#8169=EDGE_CURVE('',#8165,#8170,#8172,.T.);+#8170=VERTEX_POINT('',#8171);+#8171=CARTESIAN_POINT('',(3.626449047106,4.64,5.551115123126E-17));+#8172=CIRCLE('',#8173,0.25);+#8173=AXIS2_PLACEMENT_3D('',#8174,#59,#7551);+#8174=CARTESIAN_POINT('',(3.626449047106,4.64,0.25));+#8175=ORIENTED_EDGE('',*,*,#8176,.T.);+#8176=EDGE_CURVE('',#8170,#8177,#8179,.T.);+#8177=VERTEX_POINT('',#8178);+#8178=CARTESIAN_POINT('',(4.05,4.64,5.551115123126E-17));+#8179=LINE('',#8171,#27);+#8180=ORIENTED_EDGE('',*,*,#8181,.T.);+#8181=EDGE_CURVE('',#8177,#8182,#8184,.T.);+#8182=VERTEX_POINT('',#8183);+#8183=CARTESIAN_POINT('',(4.05,4.64,0.15));+#8184=LINE('',#8178,#754);+#8185=ORIENTED_EDGE('',*,*,#8186,.T.);+#8186=EDGE_CURVE('',#8182,#8187,#8189,.T.);+#8187=VERTEX_POINT('',#8188);+#8188=CARTESIAN_POINT('',(3.626449047106,4.64,0.15));+#8189=LINE('',#8183,#72);+#8190=ORIENTED_EDGE('',*,*,#8191,.T.);+#8191=EDGE_CURVE('',#8187,#8192,#8194,.T.);+#8192=VERTEX_POINT('',#8193);+#8193=CARTESIAN_POINT('',(3.527968271805,4.64,0.232635182233));+#8194=CIRCLE('',#8195,0.1);+#8195=AXIS2_PLACEMENT_3D('',#8174,#87,#7573);+#8196=ORIENTED_EDGE('',*,*,#8197,.T.);+#8197=EDGE_CURVE('',#8192,#8198,#8200,.T.);+#8198=VERTEX_POINT('',#8199);+#8199=CARTESIAN_POINT('',(3.496201938253,4.64,0.443412044417));+#8200=LINE('',#8193,#7579);+#8201=ORIENTED_EDGE('',*,*,#8202,.T.);+#8202=EDGE_CURVE('',#8198,#8203,#8205,.T.);+#8203=VERTEX_POINT('',#8204);+#8204=CARTESIAN_POINT('',(3.25,4.64,0.65));+#8205=CIRCLE('',#8206,0.25);+#8206=AXIS2_PLACEMENT_3D('',#8154,#59,#7585);+#8207=ORIENTED_EDGE('',*,*,#8208,.T.);+#8208=EDGE_CURVE('',#8203,#2041,#8209,.T.);+#8209=LINE('',#8204,#72);+#8210=PLANE('',#8211);+#8211=AXIS2_PLACEMENT_3D('',#8212,#59,#13);+#8212=CARTESIAN_POINT('',(3.487377466565,4.64,0.305338822795));+#8213=ADVANCED_FACE('',(#8214),#724,.F.);+#8214=FACE_BOUND('',#8215,.F.);+#8215=EDGE_LOOP('',(#8216,#8218,#8219,#8223));+#8216=ORIENTED_EDGE('',*,*,#8217,.F.);+#8217=EDGE_CURVE('',#2041,#3333,#8209,.T.);+#8218=ORIENTED_EDGE('',*,*,#2053,.T.);+#8219=ORIENTED_EDGE('',*,*,#8220,.T.);+#8220=EDGE_CURVE('',#2048,#3337,#8221,.T.);+#8221=LINE('',#8222,#72);+#8222=CARTESIAN_POINT('',(3.25,4.36,0.65));+#8223=ORIENTED_EDGE('',*,*,#3336,.F.);+#8224=ADVANCED_FACE('',(#8225),#8281,.F.);+#8225=FACE_BOUND('',#8226,.F.);+#8226=EDGE_LOOP('',(#8227,#8228,#8229,#8236,#8241,#8248,#8253,#8258,#8263,#8269,#8274,#8279));+#8227=ORIENTED_EDGE('',*,*,#2047,.F.);+#8228=ORIENTED_EDGE('',*,*,#2058,.T.);+#8229=ORIENTED_EDGE('',*,*,#8230,.T.);+#8230=EDGE_CURVE('',#2059,#8231,#8233,.T.);+#8231=VERTEX_POINT('',#8232);+#8232=CARTESIAN_POINT('',(3.348480775301,4.36,0.417364817767));+#8233=CIRCLE('',#8234,0.1);+#8234=AXIS2_PLACEMENT_3D('',#8235,#87,#7536);+#8235=CARTESIAN_POINT('',(3.25,4.36,0.4));+#8236=ORIENTED_EDGE('',*,*,#8237,.T.);+#8237=EDGE_CURVE('',#8231,#8238,#8240,.T.);+#8238=VERTEX_POINT('',#8239);+#8239=CARTESIAN_POINT('',(3.380247108853,4.36,0.206587955583));+#8240=LINE('',#8232,#7542);+#8241=ORIENTED_EDGE('',*,*,#8242,.T.);+#8242=EDGE_CURVE('',#8238,#8243,#8245,.T.);+#8243=VERTEX_POINT('',#8244);+#8244=CARTESIAN_POINT('',(3.626449047106,4.36,5.551115123126E-17));+#8245=CIRCLE('',#8246,0.25);+#8246=AXIS2_PLACEMENT_3D('',#8247,#59,#7551);+#8247=CARTESIAN_POINT('',(3.626449047106,4.36,0.25));+#8248=ORIENTED_EDGE('',*,*,#8249,.T.);+#8249=EDGE_CURVE('',#8243,#8250,#8252,.T.);+#8250=VERTEX_POINT('',#8251);+#8251=CARTESIAN_POINT('',(4.05,4.36,5.551115123126E-17));+#8252=LINE('',#8244,#27);+#8253=ORIENTED_EDGE('',*,*,#8254,.T.);+#8254=EDGE_CURVE('',#8250,#8255,#8257,.T.);+#8255=VERTEX_POINT('',#8256);+#8256=CARTESIAN_POINT('',(4.05,4.36,0.15));+#8257=LINE('',#8251,#754);+#8258=ORIENTED_EDGE('',*,*,#8259,.T.);+#8259=EDGE_CURVE('',#8255,#8260,#8262,.T.);+#8260=VERTEX_POINT('',#8261);+#8261=CARTESIAN_POINT('',(3.626449047106,4.36,0.15));+#8262=LINE('',#8256,#72);+#8263=ORIENTED_EDGE('',*,*,#8264,.T.);+#8264=EDGE_CURVE('',#8260,#8265,#8267,.T.);+#8265=VERTEX_POINT('',#8266);+#8266=CARTESIAN_POINT('',(3.527968271805,4.36,0.232635182233));+#8267=CIRCLE('',#8268,0.1);+#8268=AXIS2_PLACEMENT_3D('',#8247,#87,#7573);+#8269=ORIENTED_EDGE('',*,*,#8270,.T.);+#8270=EDGE_CURVE('',#8265,#8271,#8273,.T.);+#8271=VERTEX_POINT('',#8272);+#8272=CARTESIAN_POINT('',(3.496201938253,4.36,0.443412044417));+#8273=LINE('',#8266,#7579);+#8274=ORIENTED_EDGE('',*,*,#8275,.T.);+#8275=EDGE_CURVE('',#8271,#8276,#8277,.T.);+#8276=VERTEX_POINT('',#8222);+#8277=CIRCLE('',#8278,0.25);+#8278=AXIS2_PLACEMENT_3D('',#8235,#59,#7585);+#8279=ORIENTED_EDGE('',*,*,#8280,.T.);+#8280=EDGE_CURVE('',#8276,#2048,#8221,.T.);+#8281=PLANE('',#8282);+#8282=AXIS2_PLACEMENT_3D('',#8283,#59,#13);+#8283=CARTESIAN_POINT('',(3.487377466565,4.36,0.305338822795));+#8284=ADVANCED_FACE('',(#8285),#8299,.F.);+#8285=FACE_BOUND('',#8286,.F.);+#8286=EDGE_LOOP('',(#8287,#8288,#8295,#8298));+#8287=ORIENTED_EDGE('',*,*,#2071,.T.);+#8288=ORIENTED_EDGE('',*,*,#8289,.T.);+#8289=EDGE_CURVE('',#2066,#8290,#8292,.T.);+#8290=VERTEX_POINT('',#8291);+#8291=CARTESIAN_POINT('',(3.348480775301,4.14,0.417364817767));+#8292=CIRCLE('',#8293,0.1);+#8293=AXIS2_PLACEMENT_3D('',#8294,#87,#7536);+#8294=CARTESIAN_POINT('',(3.25,4.14,0.4));+#8295=ORIENTED_EDGE('',*,*,#8296,.F.);+#8296=EDGE_CURVE('',#8231,#8290,#8297,.T.);+#8297=LINE('',#8232,#58);+#8298=ORIENTED_EDGE('',*,*,#8230,.F.);+#8299=CYLINDRICAL_SURFACE('',#8234,0.1);+#8300=ADVANCED_FACE('',(#8301),#8350,.T.);+#8301=FACE_BOUND('',#8302,.T.);+#8302=EDGE_LOOP('',(#2078,#2064,#8288,#8303,#8308,#8315,#8320,#8325,#8330,#8336,#8341,#8347));+#8303=ORIENTED_EDGE('',*,*,#8304,.T.);+#8304=EDGE_CURVE('',#8290,#8305,#8307,.T.);+#8305=VERTEX_POINT('',#8306);+#8306=CARTESIAN_POINT('',(3.380247108853,4.14,0.206587955583));+#8307=LINE('',#8291,#7542);+#8308=ORIENTED_EDGE('',*,*,#8309,.T.);+#8309=EDGE_CURVE('',#8305,#8310,#8312,.T.);+#8310=VERTEX_POINT('',#8311);+#8311=CARTESIAN_POINT('',(3.626449047106,4.14,5.551115123126E-17));+#8312=CIRCLE('',#8313,0.25);+#8313=AXIS2_PLACEMENT_3D('',#8314,#59,#7551);+#8314=CARTESIAN_POINT('',(3.626449047106,4.14,0.25));+#8315=ORIENTED_EDGE('',*,*,#8316,.T.);+#8316=EDGE_CURVE('',#8310,#8317,#8319,.T.);+#8317=VERTEX_POINT('',#8318);+#8318=CARTESIAN_POINT('',(4.05,4.14,5.551115123126E-17));+#8319=LINE('',#8311,#27);+#8320=ORIENTED_EDGE('',*,*,#8321,.T.);+#8321=EDGE_CURVE('',#8317,#8322,#8324,.T.);+#8322=VERTEX_POINT('',#8323);+#8323=CARTESIAN_POINT('',(4.05,4.14,0.15));+#8324=LINE('',#8318,#754);+#8325=ORIENTED_EDGE('',*,*,#8326,.T.);+#8326=EDGE_CURVE('',#8322,#8327,#8329,.T.);+#8327=VERTEX_POINT('',#8328);+#8328=CARTESIAN_POINT('',(3.626449047106,4.14,0.15));+#8329=LINE('',#8323,#72);+#8330=ORIENTED_EDGE('',*,*,#8331,.T.);+#8331=EDGE_CURVE('',#8327,#8332,#8334,.T.);+#8332=VERTEX_POINT('',#8333);+#8333=CARTESIAN_POINT('',(3.527968271805,4.14,0.232635182233));+#8334=CIRCLE('',#8335,0.1);+#8335=AXIS2_PLACEMENT_3D('',#8314,#87,#7573);+#8336=ORIENTED_EDGE('',*,*,#8337,.T.);+#8337=EDGE_CURVE('',#8332,#8338,#8340,.T.);+#8338=VERTEX_POINT('',#8339);+#8339=CARTESIAN_POINT('',(3.496201938253,4.14,0.443412044417));+#8340=LINE('',#8333,#7579);+#8341=ORIENTED_EDGE('',*,*,#8342,.T.);+#8342=EDGE_CURVE('',#8338,#8343,#8345,.T.);+#8343=VERTEX_POINT('',#8344);+#8344=CARTESIAN_POINT('',(3.25,4.14,0.65));+#8345=CIRCLE('',#8346,0.25);+#8346=AXIS2_PLACEMENT_3D('',#8294,#59,#7585);+#8347=ORIENTED_EDGE('',*,*,#8348,.T.);+#8348=EDGE_CURVE('',#8343,#2080,#8349,.T.);+#8349=LINE('',#8344,#72);+#8350=PLANE('',#8351);+#8351=AXIS2_PLACEMENT_3D('',#8352,#59,#13);+#8352=CARTESIAN_POINT('',(3.487377466565,4.14,0.305338822795));+#8353=ADVANCED_FACE('',(#8354),#724,.F.);+#8354=FACE_BOUND('',#8355,.F.);+#8355=EDGE_LOOP('',(#8356,#8358,#8359,#8363));+#8356=ORIENTED_EDGE('',*,*,#8357,.F.);+#8357=EDGE_CURVE('',#2080,#3341,#8349,.T.);+#8358=ORIENTED_EDGE('',*,*,#2092,.T.);+#8359=ORIENTED_EDGE('',*,*,#8360,.T.);+#8360=EDGE_CURVE('',#2087,#3345,#8361,.T.);+#8361=LINE('',#8362,#72);+#8362=CARTESIAN_POINT('',(3.25,3.86,0.65));+#8363=ORIENTED_EDGE('',*,*,#3344,.F.);+#8364=ADVANCED_FACE('',(#8365),#8421,.F.);+#8365=FACE_BOUND('',#8366,.F.);+#8366=EDGE_LOOP('',(#8367,#8368,#8369,#8376,#8381,#8388,#8393,#8398,#8403,#8409,#8414,#8419));+#8367=ORIENTED_EDGE('',*,*,#2086,.F.);+#8368=ORIENTED_EDGE('',*,*,#2097,.T.);+#8369=ORIENTED_EDGE('',*,*,#8370,.T.);+#8370=EDGE_CURVE('',#2098,#8371,#8373,.T.);+#8371=VERTEX_POINT('',#8372);+#8372=CARTESIAN_POINT('',(3.348480775301,3.86,0.417364817767));+#8373=CIRCLE('',#8374,0.1);+#8374=AXIS2_PLACEMENT_3D('',#8375,#87,#7536);+#8375=CARTESIAN_POINT('',(3.25,3.86,0.4));+#8376=ORIENTED_EDGE('',*,*,#8377,.T.);+#8377=EDGE_CURVE('',#8371,#8378,#8380,.T.);+#8378=VERTEX_POINT('',#8379);+#8379=CARTESIAN_POINT('',(3.380247108853,3.86,0.206587955583));+#8380=LINE('',#8372,#7542);+#8381=ORIENTED_EDGE('',*,*,#8382,.T.);+#8382=EDGE_CURVE('',#8378,#8383,#8385,.T.);+#8383=VERTEX_POINT('',#8384);+#8384=CARTESIAN_POINT('',(3.626449047106,3.86,5.551115123126E-17));+#8385=CIRCLE('',#8386,0.25);+#8386=AXIS2_PLACEMENT_3D('',#8387,#59,#7551);+#8387=CARTESIAN_POINT('',(3.626449047106,3.86,0.25));+#8388=ORIENTED_EDGE('',*,*,#8389,.T.);+#8389=EDGE_CURVE('',#8383,#8390,#8392,.T.);+#8390=VERTEX_POINT('',#8391);+#8391=CARTESIAN_POINT('',(4.05,3.86,5.551115123126E-17));+#8392=LINE('',#8384,#27);+#8393=ORIENTED_EDGE('',*,*,#8394,.T.);+#8394=EDGE_CURVE('',#8390,#8395,#8397,.T.);+#8395=VERTEX_POINT('',#8396);+#8396=CARTESIAN_POINT('',(4.05,3.86,0.15));+#8397=LINE('',#8391,#754);+#8398=ORIENTED_EDGE('',*,*,#8399,.T.);+#8399=EDGE_CURVE('',#8395,#8400,#8402,.T.);+#8400=VERTEX_POINT('',#8401);+#8401=CARTESIAN_POINT('',(3.626449047106,3.86,0.15));+#8402=LINE('',#8396,#72);+#8403=ORIENTED_EDGE('',*,*,#8404,.T.);+#8404=EDGE_CURVE('',#8400,#8405,#8407,.T.);+#8405=VERTEX_POINT('',#8406);+#8406=CARTESIAN_POINT('',(3.527968271805,3.86,0.232635182233));+#8407=CIRCLE('',#8408,0.1);+#8408=AXIS2_PLACEMENT_3D('',#8387,#87,#7573);+#8409=ORIENTED_EDGE('',*,*,#8410,.T.);+#8410=EDGE_CURVE('',#8405,#8411,#8413,.T.);+#8411=VERTEX_POINT('',#8412);+#8412=CARTESIAN_POINT('',(3.496201938253,3.86,0.443412044417));+#8413=LINE('',#8406,#7579);+#8414=ORIENTED_EDGE('',*,*,#8415,.T.);+#8415=EDGE_CURVE('',#8411,#8416,#8417,.T.);+#8416=VERTEX_POINT('',#8362);+#8417=CIRCLE('',#8418,0.25);+#8418=AXIS2_PLACEMENT_3D('',#8375,#59,#7585);+#8419=ORIENTED_EDGE('',*,*,#8420,.T.);+#8420=EDGE_CURVE('',#8416,#2087,#8361,.T.);+#8421=PLANE('',#8422);+#8422=AXIS2_PLACEMENT_3D('',#8423,#59,#13);+#8423=CARTESIAN_POINT('',(3.487377466565,3.86,0.305338822795));+#8424=ADVANCED_FACE('',(#8425),#8439,.F.);+#8425=FACE_BOUND('',#8426,.F.);+#8426=EDGE_LOOP('',(#8427,#8428,#8435,#8438));+#8427=ORIENTED_EDGE('',*,*,#2110,.T.);+#8428=ORIENTED_EDGE('',*,*,#8429,.T.);+#8429=EDGE_CURVE('',#2105,#8430,#8432,.T.);+#8430=VERTEX_POINT('',#8431);+#8431=CARTESIAN_POINT('',(3.348480775301,3.64,0.417364817767));+#8432=CIRCLE('',#8433,0.1);+#8433=AXIS2_PLACEMENT_3D('',#8434,#87,#7536);+#8434=CARTESIAN_POINT('',(3.25,3.64,0.4));+#8435=ORIENTED_EDGE('',*,*,#8436,.F.);+#8436=EDGE_CURVE('',#8371,#8430,#8437,.T.);+#8437=LINE('',#8372,#58);+#8438=ORIENTED_EDGE('',*,*,#8370,.F.);+#8439=CYLINDRICAL_SURFACE('',#8374,0.1);+#8440=ADVANCED_FACE('',(#8441),#8490,.T.);+#8441=FACE_BOUND('',#8442,.T.);+#8442=EDGE_LOOP('',(#2117,#2103,#8428,#8443,#8448,#8455,#8460,#8465,#8470,#8476,#8481,#8487));+#8443=ORIENTED_EDGE('',*,*,#8444,.T.);+#8444=EDGE_CURVE('',#8430,#8445,#8447,.T.);+#8445=VERTEX_POINT('',#8446);+#8446=CARTESIAN_POINT('',(3.380247108853,3.64,0.206587955583));+#8447=LINE('',#8431,#7542);+#8448=ORIENTED_EDGE('',*,*,#8449,.T.);+#8449=EDGE_CURVE('',#8445,#8450,#8452,.T.);+#8450=VERTEX_POINT('',#8451);+#8451=CARTESIAN_POINT('',(3.626449047106,3.64,5.551115123126E-17));+#8452=CIRCLE('',#8453,0.25);+#8453=AXIS2_PLACEMENT_3D('',#8454,#59,#7551);+#8454=CARTESIAN_POINT('',(3.626449047106,3.64,0.25));+#8455=ORIENTED_EDGE('',*,*,#8456,.T.);+#8456=EDGE_CURVE('',#8450,#8457,#8459,.T.);+#8457=VERTEX_POINT('',#8458);+#8458=CARTESIAN_POINT('',(4.05,3.64,5.551115123126E-17));+#8459=LINE('',#8451,#27);+#8460=ORIENTED_EDGE('',*,*,#8461,.T.);+#8461=EDGE_CURVE('',#8457,#8462,#8464,.T.);+#8462=VERTEX_POINT('',#8463);+#8463=CARTESIAN_POINT('',(4.05,3.64,0.15));+#8464=LINE('',#8458,#754);+#8465=ORIENTED_EDGE('',*,*,#8466,.T.);+#8466=EDGE_CURVE('',#8462,#8467,#8469,.T.);+#8467=VERTEX_POINT('',#8468);+#8468=CARTESIAN_POINT('',(3.626449047106,3.64,0.15));+#8469=LINE('',#8463,#72);+#8470=ORIENTED_EDGE('',*,*,#8471,.T.);+#8471=EDGE_CURVE('',#8467,#8472,#8474,.T.);+#8472=VERTEX_POINT('',#8473);+#8473=CARTESIAN_POINT('',(3.527968271805,3.64,0.232635182233));+#8474=CIRCLE('',#8475,0.1);+#8475=AXIS2_PLACEMENT_3D('',#8454,#87,#7573);+#8476=ORIENTED_EDGE('',*,*,#8477,.T.);+#8477=EDGE_CURVE('',#8472,#8478,#8480,.T.);+#8478=VERTEX_POINT('',#8479);+#8479=CARTESIAN_POINT('',(3.496201938253,3.64,0.443412044417));+#8480=LINE('',#8473,#7579);+#8481=ORIENTED_EDGE('',*,*,#8482,.T.);+#8482=EDGE_CURVE('',#8478,#8483,#8485,.T.);+#8483=VERTEX_POINT('',#8484);+#8484=CARTESIAN_POINT('',(3.25,3.64,0.65));+#8485=CIRCLE('',#8486,0.25);+#8486=AXIS2_PLACEMENT_3D('',#8434,#59,#7585);+#8487=ORIENTED_EDGE('',*,*,#8488,.T.);+#8488=EDGE_CURVE('',#8483,#2119,#8489,.T.);+#8489=LINE('',#8484,#72);+#8490=PLANE('',#8491);+#8491=AXIS2_PLACEMENT_3D('',#8492,#59,#13);+#8492=CARTESIAN_POINT('',(3.487377466565,3.64,0.305338822795));+#8493=ADVANCED_FACE('',(#8494),#724,.F.);+#8494=FACE_BOUND('',#8495,.F.);+#8495=EDGE_LOOP('',(#8496,#8498,#8499,#8503));+#8496=ORIENTED_EDGE('',*,*,#8497,.F.);+#8497=EDGE_CURVE('',#2119,#3349,#8489,.T.);+#8498=ORIENTED_EDGE('',*,*,#2131,.T.);+#8499=ORIENTED_EDGE('',*,*,#8500,.T.);+#8500=EDGE_CURVE('',#2126,#3353,#8501,.T.);+#8501=LINE('',#8502,#72);+#8502=CARTESIAN_POINT('',(3.25,3.36,0.65));+#8503=ORIENTED_EDGE('',*,*,#3352,.F.);+#8504=ADVANCED_FACE('',(#8505),#8561,.F.);+#8505=FACE_BOUND('',#8506,.F.);+#8506=EDGE_LOOP('',(#8507,#8508,#8509,#8516,#8521,#8528,#8533,#8538,#8543,#8549,#8554,#8559));+#8507=ORIENTED_EDGE('',*,*,#2125,.F.);+#8508=ORIENTED_EDGE('',*,*,#2136,.T.);+#8509=ORIENTED_EDGE('',*,*,#8510,.T.);+#8510=EDGE_CURVE('',#2137,#8511,#8513,.T.);+#8511=VERTEX_POINT('',#8512);+#8512=CARTESIAN_POINT('',(3.348480775301,3.36,0.417364817767));+#8513=CIRCLE('',#8514,0.1);+#8514=AXIS2_PLACEMENT_3D('',#8515,#87,#7536);+#8515=CARTESIAN_POINT('',(3.25,3.36,0.4));+#8516=ORIENTED_EDGE('',*,*,#8517,.T.);+#8517=EDGE_CURVE('',#8511,#8518,#8520,.T.);+#8518=VERTEX_POINT('',#8519);+#8519=CARTESIAN_POINT('',(3.380247108853,3.36,0.206587955583));+#8520=LINE('',#8512,#7542);+#8521=ORIENTED_EDGE('',*,*,#8522,.T.);+#8522=EDGE_CURVE('',#8518,#8523,#8525,.T.);+#8523=VERTEX_POINT('',#8524);+#8524=CARTESIAN_POINT('',(3.626449047106,3.36,5.551115123126E-17));+#8525=CIRCLE('',#8526,0.25);+#8526=AXIS2_PLACEMENT_3D('',#8527,#59,#7551);+#8527=CARTESIAN_POINT('',(3.626449047106,3.36,0.25));+#8528=ORIENTED_EDGE('',*,*,#8529,.T.);+#8529=EDGE_CURVE('',#8523,#8530,#8532,.T.);+#8530=VERTEX_POINT('',#8531);+#8531=CARTESIAN_POINT('',(4.05,3.36,5.551115123126E-17));+#8532=LINE('',#8524,#27);+#8533=ORIENTED_EDGE('',*,*,#8534,.T.);+#8534=EDGE_CURVE('',#8530,#8535,#8537,.T.);+#8535=VERTEX_POINT('',#8536);+#8536=CARTESIAN_POINT('',(4.05,3.36,0.15));+#8537=LINE('',#8531,#754);+#8538=ORIENTED_EDGE('',*,*,#8539,.T.);+#8539=EDGE_CURVE('',#8535,#8540,#8542,.T.);+#8540=VERTEX_POINT('',#8541);+#8541=CARTESIAN_POINT('',(3.626449047106,3.36,0.15));+#8542=LINE('',#8536,#72);+#8543=ORIENTED_EDGE('',*,*,#8544,.T.);+#8544=EDGE_CURVE('',#8540,#8545,#8547,.T.);+#8545=VERTEX_POINT('',#8546);+#8546=CARTESIAN_POINT('',(3.527968271805,3.36,0.232635182233));+#8547=CIRCLE('',#8548,0.1);+#8548=AXIS2_PLACEMENT_3D('',#8527,#87,#7573);+#8549=ORIENTED_EDGE('',*,*,#8550,.T.);+#8550=EDGE_CURVE('',#8545,#8551,#8553,.T.);+#8551=VERTEX_POINT('',#8552);+#8552=CARTESIAN_POINT('',(3.496201938253,3.36,0.443412044417));+#8553=LINE('',#8546,#7579);+#8554=ORIENTED_EDGE('',*,*,#8555,.T.);+#8555=EDGE_CURVE('',#8551,#8556,#8557,.T.);+#8556=VERTEX_POINT('',#8502);+#8557=CIRCLE('',#8558,0.25);+#8558=AXIS2_PLACEMENT_3D('',#8515,#59,#7585);+#8559=ORIENTED_EDGE('',*,*,#8560,.T.);+#8560=EDGE_CURVE('',#8556,#2126,#8501,.T.);+#8561=PLANE('',#8562);+#8562=AXIS2_PLACEMENT_3D('',#8563,#59,#13);+#8563=CARTESIAN_POINT('',(3.487377466565,3.36,0.305338822795));+#8564=ADVANCED_FACE('',(#8565),#8579,.F.);+#8565=FACE_BOUND('',#8566,.F.);+#8566=EDGE_LOOP('',(#8567,#8568,#8575,#8578));+#8567=ORIENTED_EDGE('',*,*,#2149,.T.);+#8568=ORIENTED_EDGE('',*,*,#8569,.T.);+#8569=EDGE_CURVE('',#2144,#8570,#8572,.T.);+#8570=VERTEX_POINT('',#8571);+#8571=CARTESIAN_POINT('',(3.348480775301,3.14,0.417364817767));+#8572=CIRCLE('',#8573,0.1);+#8573=AXIS2_PLACEMENT_3D('',#8574,#87,#7536);+#8574=CARTESIAN_POINT('',(3.25,3.14,0.4));+#8575=ORIENTED_EDGE('',*,*,#8576,.F.);+#8576=EDGE_CURVE('',#8511,#8570,#8577,.T.);+#8577=LINE('',#8512,#58);+#8578=ORIENTED_EDGE('',*,*,#8510,.F.);+#8579=CYLINDRICAL_SURFACE('',#8514,0.1);+#8580=ADVANCED_FACE('',(#8581),#8630,.T.);+#8581=FACE_BOUND('',#8582,.T.);+#8582=EDGE_LOOP('',(#2156,#2142,#8568,#8583,#8588,#8595,#8600,#8605,#8610,#8616,#8621,#8627));+#8583=ORIENTED_EDGE('',*,*,#8584,.T.);+#8584=EDGE_CURVE('',#8570,#8585,#8587,.T.);+#8585=VERTEX_POINT('',#8586);+#8586=CARTESIAN_POINT('',(3.380247108853,3.14,0.206587955583));+#8587=LINE('',#8571,#7542);+#8588=ORIENTED_EDGE('',*,*,#8589,.T.);+#8589=EDGE_CURVE('',#8585,#8590,#8592,.T.);+#8590=VERTEX_POINT('',#8591);+#8591=CARTESIAN_POINT('',(3.626449047106,3.14,5.551115123126E-17));+#8592=CIRCLE('',#8593,0.25);+#8593=AXIS2_PLACEMENT_3D('',#8594,#59,#7551);+#8594=CARTESIAN_POINT('',(3.626449047106,3.14,0.25));+#8595=ORIENTED_EDGE('',*,*,#8596,.T.);+#8596=EDGE_CURVE('',#8590,#8597,#8599,.T.);+#8597=VERTEX_POINT('',#8598);+#8598=CARTESIAN_POINT('',(4.05,3.14,5.551115123126E-17));+#8599=LINE('',#8591,#27);+#8600=ORIENTED_EDGE('',*,*,#8601,.T.);+#8601=EDGE_CURVE('',#8597,#8602,#8604,.T.);+#8602=VERTEX_POINT('',#8603);+#8603=CARTESIAN_POINT('',(4.05,3.14,0.15));+#8604=LINE('',#8598,#754);+#8605=ORIENTED_EDGE('',*,*,#8606,.T.);+#8606=EDGE_CURVE('',#8602,#8607,#8609,.T.);+#8607=VERTEX_POINT('',#8608);+#8608=CARTESIAN_POINT('',(3.626449047106,3.14,0.15));+#8609=LINE('',#8603,#72);+#8610=ORIENTED_EDGE('',*,*,#8611,.T.);+#8611=EDGE_CURVE('',#8607,#8612,#8614,.T.);+#8612=VERTEX_POINT('',#8613);+#8613=CARTESIAN_POINT('',(3.527968271805,3.14,0.232635182233));+#8614=CIRCLE('',#8615,0.1);+#8615=AXIS2_PLACEMENT_3D('',#8594,#87,#7573);+#8616=ORIENTED_EDGE('',*,*,#8617,.T.);+#8617=EDGE_CURVE('',#8612,#8618,#8620,.T.);+#8618=VERTEX_POINT('',#8619);+#8619=CARTESIAN_POINT('',(3.496201938253,3.14,0.443412044417));+#8620=LINE('',#8613,#7579);+#8621=ORIENTED_EDGE('',*,*,#8622,.T.);+#8622=EDGE_CURVE('',#8618,#8623,#8625,.T.);+#8623=VERTEX_POINT('',#8624);+#8624=CARTESIAN_POINT('',(3.25,3.14,0.65));+#8625=CIRCLE('',#8626,0.25);+#8626=AXIS2_PLACEMENT_3D('',#8574,#59,#7585);+#8627=ORIENTED_EDGE('',*,*,#8628,.T.);+#8628=EDGE_CURVE('',#8623,#2158,#8629,.T.);+#8629=LINE('',#8624,#72);+#8630=PLANE('',#8631);+#8631=AXIS2_PLACEMENT_3D('',#8632,#59,#13);+#8632=CARTESIAN_POINT('',(3.487377466565,3.14,0.305338822795));+#8633=ADVANCED_FACE('',(#8634),#724,.F.);+#8634=FACE_BOUND('',#8635,.F.);+#8635=EDGE_LOOP('',(#8636,#8638,#8639,#8643));+#8636=ORIENTED_EDGE('',*,*,#8637,.F.);+#8637=EDGE_CURVE('',#2158,#3357,#8629,.T.);+#8638=ORIENTED_EDGE('',*,*,#2170,.T.);+#8639=ORIENTED_EDGE('',*,*,#8640,.T.);+#8640=EDGE_CURVE('',#2165,#3361,#8641,.T.);+#8641=LINE('',#8642,#72);+#8642=CARTESIAN_POINT('',(3.25,2.86,0.65));+#8643=ORIENTED_EDGE('',*,*,#3360,.F.);+#8644=ADVANCED_FACE('',(#8645),#8701,.F.);+#8645=FACE_BOUND('',#8646,.F.);+#8646=EDGE_LOOP('',(#8647,#8648,#8649,#8656,#8661,#8668,#8673,#8678,#8683,#8689,#8694,#8699));+#8647=ORIENTED_EDGE('',*,*,#2164,.F.);+#8648=ORIENTED_EDGE('',*,*,#2175,.T.);+#8649=ORIENTED_EDGE('',*,*,#8650,.T.);+#8650=EDGE_CURVE('',#2176,#8651,#8653,.T.);+#8651=VERTEX_POINT('',#8652);+#8652=CARTESIAN_POINT('',(3.348480775301,2.86,0.417364817767));+#8653=CIRCLE('',#8654,0.1);+#8654=AXIS2_PLACEMENT_3D('',#8655,#87,#7536);+#8655=CARTESIAN_POINT('',(3.25,2.86,0.4));+#8656=ORIENTED_EDGE('',*,*,#8657,.T.);+#8657=EDGE_CURVE('',#8651,#8658,#8660,.T.);+#8658=VERTEX_POINT('',#8659);+#8659=CARTESIAN_POINT('',(3.380247108853,2.86,0.206587955583));+#8660=LINE('',#8652,#7542);+#8661=ORIENTED_EDGE('',*,*,#8662,.T.);+#8662=EDGE_CURVE('',#8658,#8663,#8665,.T.);+#8663=VERTEX_POINT('',#8664);+#8664=CARTESIAN_POINT('',(3.626449047106,2.86,5.551115123126E-17));+#8665=CIRCLE('',#8666,0.25);+#8666=AXIS2_PLACEMENT_3D('',#8667,#59,#7551);+#8667=CARTESIAN_POINT('',(3.626449047106,2.86,0.25));+#8668=ORIENTED_EDGE('',*,*,#8669,.T.);+#8669=EDGE_CURVE('',#8663,#8670,#8672,.T.);+#8670=VERTEX_POINT('',#8671);+#8671=CARTESIAN_POINT('',(4.05,2.86,5.551115123126E-17));+#8672=LINE('',#8664,#27);+#8673=ORIENTED_EDGE('',*,*,#8674,.T.);+#8674=EDGE_CURVE('',#8670,#8675,#8677,.T.);+#8675=VERTEX_POINT('',#8676);+#8676=CARTESIAN_POINT('',(4.05,2.86,0.15));+#8677=LINE('',#8671,#754);+#8678=ORIENTED_EDGE('',*,*,#8679,.T.);+#8679=EDGE_CURVE('',#8675,#8680,#8682,.T.);+#8680=VERTEX_POINT('',#8681);+#8681=CARTESIAN_POINT('',(3.626449047106,2.86,0.15));+#8682=LINE('',#8676,#72);+#8683=ORIENTED_EDGE('',*,*,#8684,.T.);+#8684=EDGE_CURVE('',#8680,#8685,#8687,.T.);+#8685=VERTEX_POINT('',#8686);+#8686=CARTESIAN_POINT('',(3.527968271805,2.86,0.232635182233));+#8687=CIRCLE('',#8688,0.1);+#8688=AXIS2_PLACEMENT_3D('',#8667,#87,#7573);+#8689=ORIENTED_EDGE('',*,*,#8690,.T.);+#8690=EDGE_CURVE('',#8685,#8691,#8693,.T.);+#8691=VERTEX_POINT('',#8692);+#8692=CARTESIAN_POINT('',(3.496201938253,2.86,0.443412044417));+#8693=LINE('',#8686,#7579);+#8694=ORIENTED_EDGE('',*,*,#8695,.T.);+#8695=EDGE_CURVE('',#8691,#8696,#8697,.T.);+#8696=VERTEX_POINT('',#8642);+#8697=CIRCLE('',#8698,0.25);+#8698=AXIS2_PLACEMENT_3D('',#8655,#59,#7585);+#8699=ORIENTED_EDGE('',*,*,#8700,.T.);+#8700=EDGE_CURVE('',#8696,#2165,#8641,.T.);+#8701=PLANE('',#8702);+#8702=AXIS2_PLACEMENT_3D('',#8703,#59,#13);+#8703=CARTESIAN_POINT('',(3.487377466565,2.86,0.305338822795));+#8704=ADVANCED_FACE('',(#8705),#8719,.F.);+#8705=FACE_BOUND('',#8706,.F.);+#8706=EDGE_LOOP('',(#8707,#8708,#8715,#8718));+#8707=ORIENTED_EDGE('',*,*,#2188,.T.);+#8708=ORIENTED_EDGE('',*,*,#8709,.T.);+#8709=EDGE_CURVE('',#2183,#8710,#8712,.T.);+#8710=VERTEX_POINT('',#8711);+#8711=CARTESIAN_POINT('',(3.348480775301,2.64,0.417364817767));+#8712=CIRCLE('',#8713,0.1);+#8713=AXIS2_PLACEMENT_3D('',#8714,#87,#7536);+#8714=CARTESIAN_POINT('',(3.25,2.64,0.4));+#8715=ORIENTED_EDGE('',*,*,#8716,.F.);+#8716=EDGE_CURVE('',#8651,#8710,#8717,.T.);+#8717=LINE('',#8652,#58);+#8718=ORIENTED_EDGE('',*,*,#8650,.F.);+#8719=CYLINDRICAL_SURFACE('',#8654,0.1);+#8720=ADVANCED_FACE('',(#8721),#8770,.T.);+#8721=FACE_BOUND('',#8722,.T.);+#8722=EDGE_LOOP('',(#2195,#2181,#8708,#8723,#8728,#8735,#8740,#8745,#8750,#8756,#8761,#8767));+#8723=ORIENTED_EDGE('',*,*,#8724,.T.);+#8724=EDGE_CURVE('',#8710,#8725,#8727,.T.);+#8725=VERTEX_POINT('',#8726);+#8726=CARTESIAN_POINT('',(3.380247108853,2.64,0.206587955583));+#8727=LINE('',#8711,#7542);+#8728=ORIENTED_EDGE('',*,*,#8729,.T.);+#8729=EDGE_CURVE('',#8725,#8730,#8732,.T.);+#8730=VERTEX_POINT('',#8731);+#8731=CARTESIAN_POINT('',(3.626449047106,2.64,5.551115123126E-17));+#8732=CIRCLE('',#8733,0.25);+#8733=AXIS2_PLACEMENT_3D('',#8734,#59,#7551);+#8734=CARTESIAN_POINT('',(3.626449047106,2.64,0.25));+#8735=ORIENTED_EDGE('',*,*,#8736,.T.);+#8736=EDGE_CURVE('',#8730,#8737,#8739,.T.);+#8737=VERTEX_POINT('',#8738);+#8738=CARTESIAN_POINT('',(4.05,2.64,5.551115123126E-17));+#8739=LINE('',#8731,#27);+#8740=ORIENTED_EDGE('',*,*,#8741,.T.);+#8741=EDGE_CURVE('',#8737,#8742,#8744,.T.);+#8742=VERTEX_POINT('',#8743);+#8743=CARTESIAN_POINT('',(4.05,2.64,0.15));+#8744=LINE('',#8738,#754);+#8745=ORIENTED_EDGE('',*,*,#8746,.T.);+#8746=EDGE_CURVE('',#8742,#8747,#8749,.T.);+#8747=VERTEX_POINT('',#8748);+#8748=CARTESIAN_POINT('',(3.626449047106,2.64,0.15));+#8749=LINE('',#8743,#72);+#8750=ORIENTED_EDGE('',*,*,#8751,.T.);+#8751=EDGE_CURVE('',#8747,#8752,#8754,.T.);+#8752=VERTEX_POINT('',#8753);+#8753=CARTESIAN_POINT('',(3.527968271805,2.64,0.232635182233));+#8754=CIRCLE('',#8755,0.1);+#8755=AXIS2_PLACEMENT_3D('',#8734,#87,#7573);+#8756=ORIENTED_EDGE('',*,*,#8757,.T.);+#8757=EDGE_CURVE('',#8752,#8758,#8760,.T.);+#8758=VERTEX_POINT('',#8759);+#8759=CARTESIAN_POINT('',(3.496201938253,2.64,0.443412044417));+#8760=LINE('',#8753,#7579);+#8761=ORIENTED_EDGE('',*,*,#8762,.T.);+#8762=EDGE_CURVE('',#8758,#8763,#8765,.T.);+#8763=VERTEX_POINT('',#8764);+#8764=CARTESIAN_POINT('',(3.25,2.64,0.65));+#8765=CIRCLE('',#8766,0.25);+#8766=AXIS2_PLACEMENT_3D('',#8714,#59,#7585);+#8767=ORIENTED_EDGE('',*,*,#8768,.T.);+#8768=EDGE_CURVE('',#8763,#2197,#8769,.T.);+#8769=LINE('',#8764,#72);+#8770=PLANE('',#8771);+#8771=AXIS2_PLACEMENT_3D('',#8772,#59,#13);+#8772=CARTESIAN_POINT('',(3.487377466565,2.64,0.305338822795));+#8773=ADVANCED_FACE('',(#8774),#724,.F.);+#8774=FACE_BOUND('',#8775,.F.);+#8775=EDGE_LOOP('',(#8776,#8778,#8779,#8783));+#8776=ORIENTED_EDGE('',*,*,#8777,.F.);+#8777=EDGE_CURVE('',#2197,#3365,#8769,.T.);+#8778=ORIENTED_EDGE('',*,*,#2209,.T.);+#8779=ORIENTED_EDGE('',*,*,#8780,.T.);+#8780=EDGE_CURVE('',#2204,#3369,#8781,.T.);+#8781=LINE('',#8782,#72);+#8782=CARTESIAN_POINT('',(3.25,2.36,0.65));+#8783=ORIENTED_EDGE('',*,*,#3368,.F.);+#8784=ADVANCED_FACE('',(#8785),#8841,.F.);+#8785=FACE_BOUND('',#8786,.F.);+#8786=EDGE_LOOP('',(#8787,#8788,#8789,#8796,#8801,#8808,#8813,#8818,#8823,#8829,#8834,#8839));+#8787=ORIENTED_EDGE('',*,*,#2203,.F.);+#8788=ORIENTED_EDGE('',*,*,#2214,.T.);+#8789=ORIENTED_EDGE('',*,*,#8790,.T.);+#8790=EDGE_CURVE('',#2215,#8791,#8793,.T.);+#8791=VERTEX_POINT('',#8792);+#8792=CARTESIAN_POINT('',(3.348480775301,2.36,0.417364817767));+#8793=CIRCLE('',#8794,0.1);+#8794=AXIS2_PLACEMENT_3D('',#8795,#87,#7536);+#8795=CARTESIAN_POINT('',(3.25,2.36,0.4));+#8796=ORIENTED_EDGE('',*,*,#8797,.T.);+#8797=EDGE_CURVE('',#8791,#8798,#8800,.T.);+#8798=VERTEX_POINT('',#8799);+#8799=CARTESIAN_POINT('',(3.380247108853,2.36,0.206587955583));+#8800=LINE('',#8792,#7542);+#8801=ORIENTED_EDGE('',*,*,#8802,.T.);+#8802=EDGE_CURVE('',#8798,#8803,#8805,.T.);+#8803=VERTEX_POINT('',#8804);+#8804=CARTESIAN_POINT('',(3.626449047106,2.36,5.551115123126E-17));+#8805=CIRCLE('',#8806,0.25);+#8806=AXIS2_PLACEMENT_3D('',#8807,#59,#7551);+#8807=CARTESIAN_POINT('',(3.626449047106,2.36,0.25));+#8808=ORIENTED_EDGE('',*,*,#8809,.T.);+#8809=EDGE_CURVE('',#8803,#8810,#8812,.T.);+#8810=VERTEX_POINT('',#8811);+#8811=CARTESIAN_POINT('',(4.05,2.36,5.551115123126E-17));+#8812=LINE('',#8804,#27);+#8813=ORIENTED_EDGE('',*,*,#8814,.T.);+#8814=EDGE_CURVE('',#8810,#8815,#8817,.T.);+#8815=VERTEX_POINT('',#8816);+#8816=CARTESIAN_POINT('',(4.05,2.36,0.15));+#8817=LINE('',#8811,#754);+#8818=ORIENTED_EDGE('',*,*,#8819,.T.);+#8819=EDGE_CURVE('',#8815,#8820,#8822,.T.);+#8820=VERTEX_POINT('',#8821);+#8821=CARTESIAN_POINT('',(3.626449047106,2.36,0.15));+#8822=LINE('',#8816,#72);+#8823=ORIENTED_EDGE('',*,*,#8824,.T.);+#8824=EDGE_CURVE('',#8820,#8825,#8827,.T.);+#8825=VERTEX_POINT('',#8826);+#8826=CARTESIAN_POINT('',(3.527968271805,2.36,0.232635182233));+#8827=CIRCLE('',#8828,0.1);+#8828=AXIS2_PLACEMENT_3D('',#8807,#87,#7573);+#8829=ORIENTED_EDGE('',*,*,#8830,.T.);+#8830=EDGE_CURVE('',#8825,#8831,#8833,.T.);+#8831=VERTEX_POINT('',#8832);+#8832=CARTESIAN_POINT('',(3.496201938253,2.36,0.443412044417));+#8833=LINE('',#8826,#7579);+#8834=ORIENTED_EDGE('',*,*,#8835,.T.);+#8835=EDGE_CURVE('',#8831,#8836,#8837,.T.);+#8836=VERTEX_POINT('',#8782);+#8837=CIRCLE('',#8838,0.25);+#8838=AXIS2_PLACEMENT_3D('',#8795,#59,#7585);+#8839=ORIENTED_EDGE('',*,*,#8840,.T.);+#8840=EDGE_CURVE('',#8836,#2204,#8781,.T.);+#8841=PLANE('',#8842);+#8842=AXIS2_PLACEMENT_3D('',#8843,#59,#13);+#8843=CARTESIAN_POINT('',(3.487377466565,2.36,0.305338822795));+#8844=ADVANCED_FACE('',(#8845),#8859,.F.);+#8845=FACE_BOUND('',#8846,.F.);+#8846=EDGE_LOOP('',(#8847,#8848,#8855,#8858));+#8847=ORIENTED_EDGE('',*,*,#2227,.T.);+#8848=ORIENTED_EDGE('',*,*,#8849,.T.);+#8849=EDGE_CURVE('',#2222,#8850,#8852,.T.);+#8850=VERTEX_POINT('',#8851);+#8851=CARTESIAN_POINT('',(3.348480775301,2.14,0.417364817767));+#8852=CIRCLE('',#8853,0.1);+#8853=AXIS2_PLACEMENT_3D('',#8854,#87,#7536);+#8854=CARTESIAN_POINT('',(3.25,2.14,0.4));+#8855=ORIENTED_EDGE('',*,*,#8856,.F.);+#8856=EDGE_CURVE('',#8791,#8850,#8857,.T.);+#8857=LINE('',#8792,#58);+#8858=ORIENTED_EDGE('',*,*,#8790,.F.);+#8859=CYLINDRICAL_SURFACE('',#8794,0.1);+#8860=ADVANCED_FACE('',(#8861),#8910,.T.);+#8861=FACE_BOUND('',#8862,.T.);+#8862=EDGE_LOOP('',(#2234,#2220,#8848,#8863,#8868,#8875,#8880,#8885,#8890,#8896,#8901,#8907));+#8863=ORIENTED_EDGE('',*,*,#8864,.T.);+#8864=EDGE_CURVE('',#8850,#8865,#8867,.T.);+#8865=VERTEX_POINT('',#8866);+#8866=CARTESIAN_POINT('',(3.380247108853,2.14,0.206587955583));+#8867=LINE('',#8851,#7542);+#8868=ORIENTED_EDGE('',*,*,#8869,.T.);+#8869=EDGE_CURVE('',#8865,#8870,#8872,.T.);+#8870=VERTEX_POINT('',#8871);+#8871=CARTESIAN_POINT('',(3.626449047106,2.14,5.551115123126E-17));+#8872=CIRCLE('',#8873,0.25);+#8873=AXIS2_PLACEMENT_3D('',#8874,#59,#7551);+#8874=CARTESIAN_POINT('',(3.626449047106,2.14,0.25));+#8875=ORIENTED_EDGE('',*,*,#8876,.T.);+#8876=EDGE_CURVE('',#8870,#8877,#8879,.T.);+#8877=VERTEX_POINT('',#8878);+#8878=CARTESIAN_POINT('',(4.05,2.14,5.551115123126E-17));+#8879=LINE('',#8871,#27);+#8880=ORIENTED_EDGE('',*,*,#8881,.T.);+#8881=EDGE_CURVE('',#8877,#8882,#8884,.T.);+#8882=VERTEX_POINT('',#8883);+#8883=CARTESIAN_POINT('',(4.05,2.14,0.15));+#8884=LINE('',#8878,#754);+#8885=ORIENTED_EDGE('',*,*,#8886,.T.);+#8886=EDGE_CURVE('',#8882,#8887,#8889,.T.);+#8887=VERTEX_POINT('',#8888);+#8888=CARTESIAN_POINT('',(3.626449047106,2.14,0.15));+#8889=LINE('',#8883,#72);+#8890=ORIENTED_EDGE('',*,*,#8891,.T.);+#8891=EDGE_CURVE('',#8887,#8892,#8894,.T.);+#8892=VERTEX_POINT('',#8893);+#8893=CARTESIAN_POINT('',(3.527968271805,2.14,0.232635182233));+#8894=CIRCLE('',#8895,0.1);+#8895=AXIS2_PLACEMENT_3D('',#8874,#87,#7573);+#8896=ORIENTED_EDGE('',*,*,#8897,.T.);+#8897=EDGE_CURVE('',#8892,#8898,#8900,.T.);+#8898=VERTEX_POINT('',#8899);+#8899=CARTESIAN_POINT('',(3.496201938253,2.14,0.443412044417));+#8900=LINE('',#8893,#7579);+#8901=ORIENTED_EDGE('',*,*,#8902,.T.);+#8902=EDGE_CURVE('',#8898,#8903,#8905,.T.);+#8903=VERTEX_POINT('',#8904);+#8904=CARTESIAN_POINT('',(3.25,2.14,0.65));+#8905=CIRCLE('',#8906,0.25);+#8906=AXIS2_PLACEMENT_3D('',#8854,#59,#7585);+#8907=ORIENTED_EDGE('',*,*,#8908,.T.);+#8908=EDGE_CURVE('',#8903,#2236,#8909,.T.);+#8909=LINE('',#8904,#72);+#8910=PLANE('',#8911);+#8911=AXIS2_PLACEMENT_3D('',#8912,#59,#13);+#8912=CARTESIAN_POINT('',(3.487377466565,2.14,0.305338822795));+#8913=ADVANCED_FACE('',(#8914),#724,.F.);+#8914=FACE_BOUND('',#8915,.F.);+#8915=EDGE_LOOP('',(#8916,#8918,#8919,#8923));+#8916=ORIENTED_EDGE('',*,*,#8917,.F.);+#8917=EDGE_CURVE('',#2236,#3373,#8909,.T.);+#8918=ORIENTED_EDGE('',*,*,#2248,.T.);+#8919=ORIENTED_EDGE('',*,*,#8920,.T.);+#8920=EDGE_CURVE('',#2243,#3377,#8921,.T.);+#8921=LINE('',#8922,#72);+#8922=CARTESIAN_POINT('',(3.25,1.86,0.65));+#8923=ORIENTED_EDGE('',*,*,#3376,.F.);+#8924=ADVANCED_FACE('',(#8925),#8981,.F.);+#8925=FACE_BOUND('',#8926,.F.);+#8926=EDGE_LOOP('',(#8927,#8928,#8929,#8936,#8941,#8948,#8953,#8958,#8963,#8969,#8974,#8979));+#8927=ORIENTED_EDGE('',*,*,#2242,.F.);+#8928=ORIENTED_EDGE('',*,*,#2253,.T.);+#8929=ORIENTED_EDGE('',*,*,#8930,.T.);+#8930=EDGE_CURVE('',#2254,#8931,#8933,.T.);+#8931=VERTEX_POINT('',#8932);+#8932=CARTESIAN_POINT('',(3.348480775301,1.86,0.417364817767));+#8933=CIRCLE('',#8934,0.1);+#8934=AXIS2_PLACEMENT_3D('',#8935,#87,#7536);+#8935=CARTESIAN_POINT('',(3.25,1.86,0.4));+#8936=ORIENTED_EDGE('',*,*,#8937,.T.);+#8937=EDGE_CURVE('',#8931,#8938,#8940,.T.);+#8938=VERTEX_POINT('',#8939);+#8939=CARTESIAN_POINT('',(3.380247108853,1.86,0.206587955583));+#8940=LINE('',#8932,#7542);+#8941=ORIENTED_EDGE('',*,*,#8942,.T.);+#8942=EDGE_CURVE('',#8938,#8943,#8945,.T.);+#8943=VERTEX_POINT('',#8944);+#8944=CARTESIAN_POINT('',(3.626449047106,1.86,5.551115123126E-17));+#8945=CIRCLE('',#8946,0.25);+#8946=AXIS2_PLACEMENT_3D('',#8947,#59,#7551);+#8947=CARTESIAN_POINT('',(3.626449047106,1.86,0.25));+#8948=ORIENTED_EDGE('',*,*,#8949,.T.);+#8949=EDGE_CURVE('',#8943,#8950,#8952,.T.);+#8950=VERTEX_POINT('',#8951);+#8951=CARTESIAN_POINT('',(4.05,1.86,5.551115123126E-17));+#8952=LINE('',#8944,#27);+#8953=ORIENTED_EDGE('',*,*,#8954,.T.);+#8954=EDGE_CURVE('',#8950,#8955,#8957,.T.);+#8955=VERTEX_POINT('',#8956);+#8956=CARTESIAN_POINT('',(4.05,1.86,0.15));+#8957=LINE('',#8951,#754);+#8958=ORIENTED_EDGE('',*,*,#8959,.T.);+#8959=EDGE_CURVE('',#8955,#8960,#8962,.T.);+#8960=VERTEX_POINT('',#8961);+#8961=CARTESIAN_POINT('',(3.626449047106,1.86,0.15));+#8962=LINE('',#8956,#72);+#8963=ORIENTED_EDGE('',*,*,#8964,.T.);+#8964=EDGE_CURVE('',#8960,#8965,#8967,.T.);+#8965=VERTEX_POINT('',#8966);+#8966=CARTESIAN_POINT('',(3.527968271805,1.86,0.232635182233));+#8967=CIRCLE('',#8968,0.1);+#8968=AXIS2_PLACEMENT_3D('',#8947,#87,#7573);+#8969=ORIENTED_EDGE('',*,*,#8970,.T.);+#8970=EDGE_CURVE('',#8965,#8971,#8973,.T.);+#8971=VERTEX_POINT('',#8972);+#8972=CARTESIAN_POINT('',(3.496201938253,1.86,0.443412044417));+#8973=LINE('',#8966,#7579);+#8974=ORIENTED_EDGE('',*,*,#8975,.T.);+#8975=EDGE_CURVE('',#8971,#8976,#8977,.T.);+#8976=VERTEX_POINT('',#8922);+#8977=CIRCLE('',#8978,0.25);+#8978=AXIS2_PLACEMENT_3D('',#8935,#59,#7585);+#8979=ORIENTED_EDGE('',*,*,#8980,.T.);+#8980=EDGE_CURVE('',#8976,#2243,#8921,.T.);+#8981=PLANE('',#8982);+#8982=AXIS2_PLACEMENT_3D('',#8983,#59,#13);+#8983=CARTESIAN_POINT('',(3.487377466565,1.86,0.305338822795));+#8984=ADVANCED_FACE('',(#8985),#8999,.F.);+#8985=FACE_BOUND('',#8986,.F.);+#8986=EDGE_LOOP('',(#8987,#8988,#8995,#8998));+#8987=ORIENTED_EDGE('',*,*,#2266,.T.);+#8988=ORIENTED_EDGE('',*,*,#8989,.T.);+#8989=EDGE_CURVE('',#2261,#8990,#8992,.T.);+#8990=VERTEX_POINT('',#8991);+#8991=CARTESIAN_POINT('',(3.348480775301,1.64,0.417364817767));+#8992=CIRCLE('',#8993,0.1);+#8993=AXIS2_PLACEMENT_3D('',#8994,#87,#7536);+#8994=CARTESIAN_POINT('',(3.25,1.64,0.4));+#8995=ORIENTED_EDGE('',*,*,#8996,.F.);+#8996=EDGE_CURVE('',#8931,#8990,#8997,.T.);+#8997=LINE('',#8932,#58);+#8998=ORIENTED_EDGE('',*,*,#8930,.F.);+#8999=CYLINDRICAL_SURFACE('',#8934,0.1);+#9000=ADVANCED_FACE('',(#9001),#9050,.T.);+#9001=FACE_BOUND('',#9002,.T.);+#9002=EDGE_LOOP('',(#2273,#2259,#8988,#9003,#9008,#9015,#9020,#9025,#9030,#9036,#9041,#9047));+#9003=ORIENTED_EDGE('',*,*,#9004,.T.);+#9004=EDGE_CURVE('',#8990,#9005,#9007,.T.);+#9005=VERTEX_POINT('',#9006);+#9006=CARTESIAN_POINT('',(3.380247108853,1.64,0.206587955583));+#9007=LINE('',#8991,#7542);+#9008=ORIENTED_EDGE('',*,*,#9009,.T.);+#9009=EDGE_CURVE('',#9005,#9010,#9012,.T.);+#9010=VERTEX_POINT('',#9011);+#9011=CARTESIAN_POINT('',(3.626449047106,1.64,5.551115123126E-17));+#9012=CIRCLE('',#9013,0.25);+#9013=AXIS2_PLACEMENT_3D('',#9014,#59,#7551);+#9014=CARTESIAN_POINT('',(3.626449047106,1.64,0.25));+#9015=ORIENTED_EDGE('',*,*,#9016,.T.);+#9016=EDGE_CURVE('',#9010,#9017,#9019,.T.);+#9017=VERTEX_POINT('',#9018);+#9018=CARTESIAN_POINT('',(4.05,1.64,5.551115123126E-17));+#9019=LINE('',#9011,#27);+#9020=ORIENTED_EDGE('',*,*,#9021,.T.);+#9021=EDGE_CURVE('',#9017,#9022,#9024,.T.);+#9022=VERTEX_POINT('',#9023);+#9023=CARTESIAN_POINT('',(4.05,1.64,0.15));+#9024=LINE('',#9018,#754);+#9025=ORIENTED_EDGE('',*,*,#9026,.T.);+#9026=EDGE_CURVE('',#9022,#9027,#9029,.T.);+#9027=VERTEX_POINT('',#9028);+#9028=CARTESIAN_POINT('',(3.626449047106,1.64,0.15));+#9029=LINE('',#9023,#72);+#9030=ORIENTED_EDGE('',*,*,#9031,.T.);+#9031=EDGE_CURVE('',#9027,#9032,#9034,.T.);+#9032=VERTEX_POINT('',#9033);+#9033=CARTESIAN_POINT('',(3.527968271805,1.64,0.232635182233));+#9034=CIRCLE('',#9035,0.1);+#9035=AXIS2_PLACEMENT_3D('',#9014,#87,#7573);+#9036=ORIENTED_EDGE('',*,*,#9037,.T.);+#9037=EDGE_CURVE('',#9032,#9038,#9040,.T.);+#9038=VERTEX_POINT('',#9039);+#9039=CARTESIAN_POINT('',(3.496201938253,1.64,0.443412044417));+#9040=LINE('',#9033,#7579);+#9041=ORIENTED_EDGE('',*,*,#9042,.T.);+#9042=EDGE_CURVE('',#9038,#9043,#9045,.T.);+#9043=VERTEX_POINT('',#9044);+#9044=CARTESIAN_POINT('',(3.25,1.64,0.65));+#9045=CIRCLE('',#9046,0.25);+#9046=AXIS2_PLACEMENT_3D('',#8994,#59,#7585);+#9047=ORIENTED_EDGE('',*,*,#9048,.T.);+#9048=EDGE_CURVE('',#9043,#2275,#9049,.T.);+#9049=LINE('',#9044,#72);+#9050=PLANE('',#9051);+#9051=AXIS2_PLACEMENT_3D('',#9052,#59,#13);+#9052=CARTESIAN_POINT('',(3.487377466565,1.64,0.305338822795));+#9053=ADVANCED_FACE('',(#9054),#724,.F.);+#9054=FACE_BOUND('',#9055,.F.);+#9055=EDGE_LOOP('',(#9056,#9058,#9059,#9063));+#9056=ORIENTED_EDGE('',*,*,#9057,.F.);+#9057=EDGE_CURVE('',#2275,#3381,#9049,.T.);+#9058=ORIENTED_EDGE('',*,*,#2287,.T.);+#9059=ORIENTED_EDGE('',*,*,#9060,.T.);+#9060=EDGE_CURVE('',#2282,#3385,#9061,.T.);+#9061=LINE('',#9062,#72);+#9062=CARTESIAN_POINT('',(3.25,1.36,0.65));+#9063=ORIENTED_EDGE('',*,*,#3384,.F.);+#9064=ADVANCED_FACE('',(#9065),#9121,.F.);+#9065=FACE_BOUND('',#9066,.F.);+#9066=EDGE_LOOP('',(#9067,#9068,#9069,#9076,#9081,#9088,#9093,#9098,#9103,#9109,#9114,#9119));+#9067=ORIENTED_EDGE('',*,*,#2281,.F.);+#9068=ORIENTED_EDGE('',*,*,#2292,.T.);+#9069=ORIENTED_EDGE('',*,*,#9070,.T.);+#9070=EDGE_CURVE('',#2293,#9071,#9073,.T.);+#9071=VERTEX_POINT('',#9072);+#9072=CARTESIAN_POINT('',(3.348480775301,1.36,0.417364817767));+#9073=CIRCLE('',#9074,0.1);+#9074=AXIS2_PLACEMENT_3D('',#9075,#87,#7536);+#9075=CARTESIAN_POINT('',(3.25,1.36,0.4));+#9076=ORIENTED_EDGE('',*,*,#9077,.T.);+#9077=EDGE_CURVE('',#9071,#9078,#9080,.T.);+#9078=VERTEX_POINT('',#9079);+#9079=CARTESIAN_POINT('',(3.380247108853,1.36,0.206587955583));+#9080=LINE('',#9072,#7542);+#9081=ORIENTED_EDGE('',*,*,#9082,.T.);+#9082=EDGE_CURVE('',#9078,#9083,#9085,.T.);+#9083=VERTEX_POINT('',#9084);+#9084=CARTESIAN_POINT('',(3.626449047106,1.36,5.551115123126E-17));+#9085=CIRCLE('',#9086,0.25);+#9086=AXIS2_PLACEMENT_3D('',#9087,#59,#7551);+#9087=CARTESIAN_POINT('',(3.626449047106,1.36,0.25));+#9088=ORIENTED_EDGE('',*,*,#9089,.T.);+#9089=EDGE_CURVE('',#9083,#9090,#9092,.T.);+#9090=VERTEX_POINT('',#9091);+#9091=CARTESIAN_POINT('',(4.05,1.36,5.551115123126E-17));+#9092=LINE('',#9084,#27);+#9093=ORIENTED_EDGE('',*,*,#9094,.T.);+#9094=EDGE_CURVE('',#9090,#9095,#9097,.T.);+#9095=VERTEX_POINT('',#9096);+#9096=CARTESIAN_POINT('',(4.05,1.36,0.15));+#9097=LINE('',#9091,#754);+#9098=ORIENTED_EDGE('',*,*,#9099,.T.);+#9099=EDGE_CURVE('',#9095,#9100,#9102,.T.);+#9100=VERTEX_POINT('',#9101);+#9101=CARTESIAN_POINT('',(3.626449047106,1.36,0.15));+#9102=LINE('',#9096,#72);+#9103=ORIENTED_EDGE('',*,*,#9104,.T.);+#9104=EDGE_CURVE('',#9100,#9105,#9107,.T.);+#9105=VERTEX_POINT('',#9106);+#9106=CARTESIAN_POINT('',(3.527968271805,1.36,0.232635182233));+#9107=CIRCLE('',#9108,0.1);+#9108=AXIS2_PLACEMENT_3D('',#9087,#87,#7573);+#9109=ORIENTED_EDGE('',*,*,#9110,.T.);+#9110=EDGE_CURVE('',#9105,#9111,#9113,.T.);+#9111=VERTEX_POINT('',#9112);+#9112=CARTESIAN_POINT('',(3.496201938253,1.36,0.443412044417));+#9113=LINE('',#9106,#7579);+#9114=ORIENTED_EDGE('',*,*,#9115,.T.);+#9115=EDGE_CURVE('',#9111,#9116,#9117,.T.);+#9116=VERTEX_POINT('',#9062);+#9117=CIRCLE('',#9118,0.25);+#9118=AXIS2_PLACEMENT_3D('',#9075,#59,#7585);+#9119=ORIENTED_EDGE('',*,*,#9120,.T.);+#9120=EDGE_CURVE('',#9116,#2282,#9061,.T.);+#9121=PLANE('',#9122);+#9122=AXIS2_PLACEMENT_3D('',#9123,#59,#13);+#9123=CARTESIAN_POINT('',(3.487377466565,1.36,0.305338822795));+#9124=ADVANCED_FACE('',(#9125),#9139,.F.);+#9125=FACE_BOUND('',#9126,.F.);+#9126=EDGE_LOOP('',(#9127,#9128,#9135,#9138));+#9127=ORIENTED_EDGE('',*,*,#2305,.T.);+#9128=ORIENTED_EDGE('',*,*,#9129,.T.);+#9129=EDGE_CURVE('',#2300,#9130,#9132,.T.);+#9130=VERTEX_POINT('',#9131);+#9131=CARTESIAN_POINT('',(3.348480775301,1.14,0.417364817767));+#9132=CIRCLE('',#9133,0.1);+#9133=AXIS2_PLACEMENT_3D('',#9134,#87,#7536);+#9134=CARTESIAN_POINT('',(3.25,1.14,0.4));+#9135=ORIENTED_EDGE('',*,*,#9136,.F.);+#9136=EDGE_CURVE('',#9071,#9130,#9137,.T.);+#9137=LINE('',#9072,#58);+#9138=ORIENTED_EDGE('',*,*,#9070,.F.);+#9139=CYLINDRICAL_SURFACE('',#9074,0.1);+#9140=ADVANCED_FACE('',(#9141),#9190,.T.);+#9141=FACE_BOUND('',#9142,.T.);+#9142=EDGE_LOOP('',(#2312,#2298,#9128,#9143,#9148,#9155,#9160,#9165,#9170,#9176,#9181,#9187));+#9143=ORIENTED_EDGE('',*,*,#9144,.T.);+#9144=EDGE_CURVE('',#9130,#9145,#9147,.T.);+#9145=VERTEX_POINT('',#9146);+#9146=CARTESIAN_POINT('',(3.380247108853,1.14,0.206587955583));+#9147=LINE('',#9131,#7542);+#9148=ORIENTED_EDGE('',*,*,#9149,.T.);+#9149=EDGE_CURVE('',#9145,#9150,#9152,.T.);+#9150=VERTEX_POINT('',#9151);+#9151=CARTESIAN_POINT('',(3.626449047106,1.14,5.551115123126E-17));+#9152=CIRCLE('',#9153,0.25);+#9153=AXIS2_PLACEMENT_3D('',#9154,#59,#7551);+#9154=CARTESIAN_POINT('',(3.626449047106,1.14,0.25));+#9155=ORIENTED_EDGE('',*,*,#9156,.T.);+#9156=EDGE_CURVE('',#9150,#9157,#9159,.T.);+#9157=VERTEX_POINT('',#9158);+#9158=CARTESIAN_POINT('',(4.05,1.14,5.551115123126E-17));+#9159=LINE('',#9151,#27);+#9160=ORIENTED_EDGE('',*,*,#9161,.T.);+#9161=EDGE_CURVE('',#9157,#9162,#9164,.T.);+#9162=VERTEX_POINT('',#9163);+#9163=CARTESIAN_POINT('',(4.05,1.14,0.15));+#9164=LINE('',#9158,#754);+#9165=ORIENTED_EDGE('',*,*,#9166,.T.);+#9166=EDGE_CURVE('',#9162,#9167,#9169,.T.);+#9167=VERTEX_POINT('',#9168);+#9168=CARTESIAN_POINT('',(3.626449047106,1.14,0.15));+#9169=LINE('',#9163,#72);+#9170=ORIENTED_EDGE('',*,*,#9171,.T.);+#9171=EDGE_CURVE('',#9167,#9172,#9174,.T.);+#9172=VERTEX_POINT('',#9173);+#9173=CARTESIAN_POINT('',(3.527968271805,1.14,0.232635182233));+#9174=CIRCLE('',#9175,0.1);+#9175=AXIS2_PLACEMENT_3D('',#9154,#87,#7573);+#9176=ORIENTED_EDGE('',*,*,#9177,.T.);+#9177=EDGE_CURVE('',#9172,#9178,#9180,.T.);+#9178=VERTEX_POINT('',#9179);+#9179=CARTESIAN_POINT('',(3.496201938253,1.14,0.443412044417));+#9180=LINE('',#9173,#7579);+#9181=ORIENTED_EDGE('',*,*,#9182,.T.);+#9182=EDGE_CURVE('',#9178,#9183,#9185,.T.);+#9183=VERTEX_POINT('',#9184);+#9184=CARTESIAN_POINT('',(3.25,1.14,0.65));+#9185=CIRCLE('',#9186,0.25);+#9186=AXIS2_PLACEMENT_3D('',#9134,#59,#7585);+#9187=ORIENTED_EDGE('',*,*,#9188,.T.);+#9188=EDGE_CURVE('',#9183,#2314,#9189,.T.);+#9189=LINE('',#9184,#72);+#9190=PLANE('',#9191);+#9191=AXIS2_PLACEMENT_3D('',#9192,#59,#13);+#9192=CARTESIAN_POINT('',(3.487377466565,1.14,0.305338822795));+#9193=ADVANCED_FACE('',(#9194),#724,.F.);+#9194=FACE_BOUND('',#9195,.F.);+#9195=EDGE_LOOP('',(#9196,#9198,#9199,#9203));+#9196=ORIENTED_EDGE('',*,*,#9197,.F.);+#9197=EDGE_CURVE('',#2314,#3389,#9189,.T.);+#9198=ORIENTED_EDGE('',*,*,#2326,.T.);+#9199=ORIENTED_EDGE('',*,*,#9200,.T.);+#9200=EDGE_CURVE('',#2321,#3393,#9201,.T.);+#9201=LINE('',#9202,#72);+#9202=CARTESIAN_POINT('',(3.25,0.86,0.65));+#9203=ORIENTED_EDGE('',*,*,#3392,.F.);+#9204=ADVANCED_FACE('',(#9205),#9261,.F.);+#9205=FACE_BOUND('',#9206,.F.);+#9206=EDGE_LOOP('',(#9207,#9208,#9209,#9216,#9221,#9228,#9233,#9238,#9243,#9249,#9254,#9259));+#9207=ORIENTED_EDGE('',*,*,#2320,.F.);+#9208=ORIENTED_EDGE('',*,*,#2331,.T.);+#9209=ORIENTED_EDGE('',*,*,#9210,.T.);+#9210=EDGE_CURVE('',#2332,#9211,#9213,.T.);+#9211=VERTEX_POINT('',#9212);+#9212=CARTESIAN_POINT('',(3.348480775301,0.86,0.417364817767));+#9213=CIRCLE('',#9214,0.1);+#9214=AXIS2_PLACEMENT_3D('',#9215,#87,#7536);+#9215=CARTESIAN_POINT('',(3.25,0.86,0.4));+#9216=ORIENTED_EDGE('',*,*,#9217,.T.);+#9217=EDGE_CURVE('',#9211,#9218,#9220,.T.);+#9218=VERTEX_POINT('',#9219);+#9219=CARTESIAN_POINT('',(3.380247108853,0.86,0.206587955583));+#9220=LINE('',#9212,#7542);+#9221=ORIENTED_EDGE('',*,*,#9222,.T.);+#9222=EDGE_CURVE('',#9218,#9223,#9225,.T.);+#9223=VERTEX_POINT('',#9224);+#9224=CARTESIAN_POINT('',(3.626449047106,0.86,5.551115123126E-17));+#9225=CIRCLE('',#9226,0.25);+#9226=AXIS2_PLACEMENT_3D('',#9227,#59,#7551);+#9227=CARTESIAN_POINT('',(3.626449047106,0.86,0.25));+#9228=ORIENTED_EDGE('',*,*,#9229,.T.);+#9229=EDGE_CURVE('',#9223,#9230,#9232,.T.);+#9230=VERTEX_POINT('',#9231);+#9231=CARTESIAN_POINT('',(4.05,0.86,5.551115123126E-17));+#9232=LINE('',#9224,#27);+#9233=ORIENTED_EDGE('',*,*,#9234,.T.);+#9234=EDGE_CURVE('',#9230,#9235,#9237,.T.);+#9235=VERTEX_POINT('',#9236);+#9236=CARTESIAN_POINT('',(4.05,0.86,0.15));+#9237=LINE('',#9231,#754);+#9238=ORIENTED_EDGE('',*,*,#9239,.T.);+#9239=EDGE_CURVE('',#9235,#9240,#9242,.T.);+#9240=VERTEX_POINT('',#9241);+#9241=CARTESIAN_POINT('',(3.626449047106,0.86,0.15));+#9242=LINE('',#9236,#72);+#9243=ORIENTED_EDGE('',*,*,#9244,.T.);+#9244=EDGE_CURVE('',#9240,#9245,#9247,.T.);+#9245=VERTEX_POINT('',#9246);+#9246=CARTESIAN_POINT('',(3.527968271805,0.86,0.232635182233));+#9247=CIRCLE('',#9248,0.1);+#9248=AXIS2_PLACEMENT_3D('',#9227,#87,#7573);+#9249=ORIENTED_EDGE('',*,*,#9250,.T.);+#9250=EDGE_CURVE('',#9245,#9251,#9253,.T.);+#9251=VERTEX_POINT('',#9252);+#9252=CARTESIAN_POINT('',(3.496201938253,0.86,0.443412044417));+#9253=LINE('',#9246,#7579);+#9254=ORIENTED_EDGE('',*,*,#9255,.T.);+#9255=EDGE_CURVE('',#9251,#9256,#9257,.T.);+#9256=VERTEX_POINT('',#9202);+#9257=CIRCLE('',#9258,0.25);+#9258=AXIS2_PLACEMENT_3D('',#9215,#59,#7585);+#9259=ORIENTED_EDGE('',*,*,#9260,.T.);+#9260=EDGE_CURVE('',#9256,#2321,#9201,.T.);+#9261=PLANE('',#9262);+#9262=AXIS2_PLACEMENT_3D('',#9263,#59,#13);+#9263=CARTESIAN_POINT('',(3.487377466565,0.86,0.305338822795));+#9264=ADVANCED_FACE('',(#9265),#9279,.F.);+#9265=FACE_BOUND('',#9266,.F.);+#9266=EDGE_LOOP('',(#9267,#9268,#9275,#9278));+#9267=ORIENTED_EDGE('',*,*,#2344,.T.);+#9268=ORIENTED_EDGE('',*,*,#9269,.T.);+#9269=EDGE_CURVE('',#2339,#9270,#9272,.T.);+#9270=VERTEX_POINT('',#9271);+#9271=CARTESIAN_POINT('',(3.348480775301,0.64,0.417364817767));+#9272=CIRCLE('',#9273,0.1);+#9273=AXIS2_PLACEMENT_3D('',#9274,#87,#7536);+#9274=CARTESIAN_POINT('',(3.25,0.64,0.4));+#9275=ORIENTED_EDGE('',*,*,#9276,.F.);+#9276=EDGE_CURVE('',#9211,#9270,#9277,.T.);+#9277=LINE('',#9212,#58);+#9278=ORIENTED_EDGE('',*,*,#9210,.F.);+#9279=CYLINDRICAL_SURFACE('',#9214,0.1);+#9280=ADVANCED_FACE('',(#9281),#9330,.T.);+#9281=FACE_BOUND('',#9282,.T.);+#9282=EDGE_LOOP('',(#2351,#2337,#9268,#9283,#9288,#9295,#9300,#9305,#9310,#9316,#9321,#9327));+#9283=ORIENTED_EDGE('',*,*,#9284,.T.);+#9284=EDGE_CURVE('',#9270,#9285,#9287,.T.);+#9285=VERTEX_POINT('',#9286);+#9286=CARTESIAN_POINT('',(3.380247108853,0.64,0.206587955583));+#9287=LINE('',#9271,#7542);+#9288=ORIENTED_EDGE('',*,*,#9289,.T.);+#9289=EDGE_CURVE('',#9285,#9290,#9292,.T.);+#9290=VERTEX_POINT('',#9291);+#9291=CARTESIAN_POINT('',(3.626449047106,0.64,5.551115123126E-17));+#9292=CIRCLE('',#9293,0.25);+#9293=AXIS2_PLACEMENT_3D('',#9294,#59,#7551);+#9294=CARTESIAN_POINT('',(3.626449047106,0.64,0.25));+#9295=ORIENTED_EDGE('',*,*,#9296,.T.);+#9296=EDGE_CURVE('',#9290,#9297,#9299,.T.);+#9297=VERTEX_POINT('',#9298);+#9298=CARTESIAN_POINT('',(4.05,0.64,5.551115123126E-17));+#9299=LINE('',#9291,#27);+#9300=ORIENTED_EDGE('',*,*,#9301,.T.);+#9301=EDGE_CURVE('',#9297,#9302,#9304,.T.);+#9302=VERTEX_POINT('',#9303);+#9303=CARTESIAN_POINT('',(4.05,0.64,0.15));+#9304=LINE('',#9298,#754);+#9305=ORIENTED_EDGE('',*,*,#9306,.T.);+#9306=EDGE_CURVE('',#9302,#9307,#9309,.T.);+#9307=VERTEX_POINT('',#9308);+#9308=CARTESIAN_POINT('',(3.626449047106,0.64,0.15));+#9309=LINE('',#9303,#72);+#9310=ORIENTED_EDGE('',*,*,#9311,.T.);+#9311=EDGE_CURVE('',#9307,#9312,#9314,.T.);+#9312=VERTEX_POINT('',#9313);+#9313=CARTESIAN_POINT('',(3.527968271805,0.64,0.232635182233));+#9314=CIRCLE('',#9315,0.1);+#9315=AXIS2_PLACEMENT_3D('',#9294,#87,#7573);+#9316=ORIENTED_EDGE('',*,*,#9317,.T.);+#9317=EDGE_CURVE('',#9312,#9318,#9320,.T.);+#9318=VERTEX_POINT('',#9319);+#9319=CARTESIAN_POINT('',(3.496201938253,0.64,0.443412044417));+#9320=LINE('',#9313,#7579);+#9321=ORIENTED_EDGE('',*,*,#9322,.T.);+#9322=EDGE_CURVE('',#9318,#9323,#9325,.T.);+#9323=VERTEX_POINT('',#9324);+#9324=CARTESIAN_POINT('',(3.25,0.64,0.65));+#9325=CIRCLE('',#9326,0.25);+#9326=AXIS2_PLACEMENT_3D('',#9274,#59,#7585);+#9327=ORIENTED_EDGE('',*,*,#9328,.T.);+#9328=EDGE_CURVE('',#9323,#2353,#9329,.T.);+#9329=LINE('',#9324,#72);+#9330=PLANE('',#9331);+#9331=AXIS2_PLACEMENT_3D('',#9332,#59,#13);+#9332=CARTESIAN_POINT('',(3.487377466565,0.64,0.305338822795));+#9333=ADVANCED_FACE('',(#9334),#724,.F.);+#9334=FACE_BOUND('',#9335,.F.);+#9335=EDGE_LOOP('',(#9336,#9338,#9339,#9343));+#9336=ORIENTED_EDGE('',*,*,#9337,.F.);+#9337=EDGE_CURVE('',#2353,#3397,#9329,.T.);+#9338=ORIENTED_EDGE('',*,*,#2365,.T.);+#9339=ORIENTED_EDGE('',*,*,#9340,.T.);+#9340=EDGE_CURVE('',#2360,#3401,#9341,.T.);+#9341=LINE('',#9342,#72);+#9342=CARTESIAN_POINT('',(3.25,0.36,0.65));+#9343=ORIENTED_EDGE('',*,*,#3400,.F.);+#9344=ADVANCED_FACE('',(#9345),#9401,.F.);+#9345=FACE_BOUND('',#9346,.F.);+#9346=EDGE_LOOP('',(#9347,#9348,#9349,#9356,#9361,#9368,#9373,#9378,#9383,#9389,#9394,#9399));+#9347=ORIENTED_EDGE('',*,*,#2359,.F.);+#9348=ORIENTED_EDGE('',*,*,#2370,.T.);+#9349=ORIENTED_EDGE('',*,*,#9350,.T.);+#9350=EDGE_CURVE('',#2371,#9351,#9353,.T.);+#9351=VERTEX_POINT('',#9352);+#9352=CARTESIAN_POINT('',(3.348480775301,0.36,0.417364817767));+#9353=CIRCLE('',#9354,0.1);+#9354=AXIS2_PLACEMENT_3D('',#9355,#87,#7536);+#9355=CARTESIAN_POINT('',(3.25,0.36,0.4));+#9356=ORIENTED_EDGE('',*,*,#9357,.T.);+#9357=EDGE_CURVE('',#9351,#9358,#9360,.T.);+#9358=VERTEX_POINT('',#9359);+#9359=CARTESIAN_POINT('',(3.380247108853,0.36,0.206587955583));+#9360=LINE('',#9352,#7542);+#9361=ORIENTED_EDGE('',*,*,#9362,.T.);+#9362=EDGE_CURVE('',#9358,#9363,#9365,.T.);+#9363=VERTEX_POINT('',#9364);+#9364=CARTESIAN_POINT('',(3.626449047106,0.36,5.551115123126E-17));+#9365=CIRCLE('',#9366,0.25);+#9366=AXIS2_PLACEMENT_3D('',#9367,#59,#7551);+#9367=CARTESIAN_POINT('',(3.626449047106,0.36,0.25));+#9368=ORIENTED_EDGE('',*,*,#9369,.T.);+#9369=EDGE_CURVE('',#9363,#9370,#9372,.T.);+#9370=VERTEX_POINT('',#9371);+#9371=CARTESIAN_POINT('',(4.05,0.36,5.551115123126E-17));+#9372=LINE('',#9364,#27);+#9373=ORIENTED_EDGE('',*,*,#9374,.T.);+#9374=EDGE_CURVE('',#9370,#9375,#9377,.T.);+#9375=VERTEX_POINT('',#9376);+#9376=CARTESIAN_POINT('',(4.05,0.36,0.15));+#9377=LINE('',#9371,#754);+#9378=ORIENTED_EDGE('',*,*,#9379,.T.);+#9379=EDGE_CURVE('',#9375,#9380,#9382,.T.);+#9380=VERTEX_POINT('',#9381);+#9381=CARTESIAN_POINT('',(3.626449047106,0.36,0.15));+#9382=LINE('',#9376,#72);+#9383=ORIENTED_EDGE('',*,*,#9384,.T.);+#9384=EDGE_CURVE('',#9380,#9385,#9387,.T.);+#9385=VERTEX_POINT('',#9386);+#9386=CARTESIAN_POINT('',(3.527968271805,0.36,0.232635182233));+#9387=CIRCLE('',#9388,0.1);+#9388=AXIS2_PLACEMENT_3D('',#9367,#87,#7573);+#9389=ORIENTED_EDGE('',*,*,#9390,.T.);+#9390=EDGE_CURVE('',#9385,#9391,#9393,.T.);+#9391=VERTEX_POINT('',#9392);+#9392=CARTESIAN_POINT('',(3.496201938253,0.36,0.443412044417));+#9393=LINE('',#9386,#7579);+#9394=ORIENTED_EDGE('',*,*,#9395,.T.);+#9395=EDGE_CURVE('',#9391,#9396,#9397,.T.);+#9396=VERTEX_POINT('',#9342);+#9397=CIRCLE('',#9398,0.25);+#9398=AXIS2_PLACEMENT_3D('',#9355,#59,#7585);+#9399=ORIENTED_EDGE('',*,*,#9400,.T.);+#9400=EDGE_CURVE('',#9396,#2360,#9341,.T.);+#9401=PLANE('',#9402);+#9402=AXIS2_PLACEMENT_3D('',#9403,#59,#13);+#9403=CARTESIAN_POINT('',(3.487377466565,0.36,0.305338822795));+#9404=ADVANCED_FACE('',(#9405),#9419,.F.);+#9405=FACE_BOUND('',#9406,.F.);+#9406=EDGE_LOOP('',(#9407,#9408,#9415,#9418));+#9407=ORIENTED_EDGE('',*,*,#2383,.T.);+#9408=ORIENTED_EDGE('',*,*,#9409,.T.);+#9409=EDGE_CURVE('',#2378,#9410,#9412,.T.);+#9410=VERTEX_POINT('',#9411);+#9411=CARTESIAN_POINT('',(3.348480775301,0.14,0.417364817767));+#9412=CIRCLE('',#9413,0.1);+#9413=AXIS2_PLACEMENT_3D('',#9414,#87,#7536);+#9414=CARTESIAN_POINT('',(3.25,0.14,0.4));+#9415=ORIENTED_EDGE('',*,*,#9416,.F.);+#9416=EDGE_CURVE('',#9351,#9410,#9417,.T.);+#9417=LINE('',#9352,#58);+#9418=ORIENTED_EDGE('',*,*,#9350,.F.);+#9419=CYLINDRICAL_SURFACE('',#9354,0.1);+#9420=ADVANCED_FACE('',(#9421),#9470,.T.);+#9421=FACE_BOUND('',#9422,.T.);+#9422=EDGE_LOOP('',(#2390,#2376,#9408,#9423,#9428,#9435,#9440,#9445,#9450,#9456,#9461,#9467));+#9423=ORIENTED_EDGE('',*,*,#9424,.T.);+#9424=EDGE_CURVE('',#9410,#9425,#9427,.T.);+#9425=VERTEX_POINT('',#9426);+#9426=CARTESIAN_POINT('',(3.380247108853,0.14,0.206587955583));+#9427=LINE('',#9411,#7542);+#9428=ORIENTED_EDGE('',*,*,#9429,.T.);+#9429=EDGE_CURVE('',#9425,#9430,#9432,.T.);+#9430=VERTEX_POINT('',#9431);+#9431=CARTESIAN_POINT('',(3.626449047106,0.14,5.551115123126E-17));+#9432=CIRCLE('',#9433,0.25);+#9433=AXIS2_PLACEMENT_3D('',#9434,#59,#7551);+#9434=CARTESIAN_POINT('',(3.626449047106,0.14,0.25));+#9435=ORIENTED_EDGE('',*,*,#9436,.T.);+#9436=EDGE_CURVE('',#9430,#9437,#9439,.T.);+#9437=VERTEX_POINT('',#9438);+#9438=CARTESIAN_POINT('',(4.05,0.14,5.551115123126E-17));+#9439=LINE('',#9431,#27);+#9440=ORIENTED_EDGE('',*,*,#9441,.T.);+#9441=EDGE_CURVE('',#9437,#9442,#9444,.T.);+#9442=VERTEX_POINT('',#9443);+#9443=CARTESIAN_POINT('',(4.05,0.14,0.15));+#9444=LINE('',#9438,#754);+#9445=ORIENTED_EDGE('',*,*,#9446,.T.);+#9446=EDGE_CURVE('',#9442,#9447,#9449,.T.);+#9447=VERTEX_POINT('',#9448);+#9448=CARTESIAN_POINT('',(3.626449047106,0.14,0.15));+#9449=LINE('',#9443,#72);+#9450=ORIENTED_EDGE('',*,*,#9451,.T.);+#9451=EDGE_CURVE('',#9447,#9452,#9454,.T.);+#9452=VERTEX_POINT('',#9453);+#9453=CARTESIAN_POINT('',(3.527968271805,0.14,0.232635182233));+#9454=CIRCLE('',#9455,0.1);+#9455=AXIS2_PLACEMENT_3D('',#9434,#87,#7573);+#9456=ORIENTED_EDGE('',*,*,#9457,.T.);+#9457=EDGE_CURVE('',#9452,#9458,#9460,.T.);+#9458=VERTEX_POINT('',#9459);+#9459=CARTESIAN_POINT('',(3.496201938253,0.14,0.443412044417));+#9460=LINE('',#9453,#7579);+#9461=ORIENTED_EDGE('',*,*,#9462,.T.);+#9462=EDGE_CURVE('',#9458,#9463,#9465,.T.);+#9463=VERTEX_POINT('',#9464);+#9464=CARTESIAN_POINT('',(3.25,0.14,0.65));+#9465=CIRCLE('',#9466,0.25);+#9466=AXIS2_PLACEMENT_3D('',#9414,#59,#7585);+#9467=ORIENTED_EDGE('',*,*,#9468,.T.);+#9468=EDGE_CURVE('',#9463,#2392,#9469,.T.);+#9469=LINE('',#9464,#72);+#9470=PLANE('',#9471);+#9471=AXIS2_PLACEMENT_3D('',#9472,#59,#13);+#9472=CARTESIAN_POINT('',(3.487377466565,0.14,0.305338822795));+#9473=ADVANCED_FACE('',(#9474),#724,.F.);+#9474=FACE_BOUND('',#9475,.F.);+#9475=EDGE_LOOP('',(#9476,#9478,#9479,#9483));+#9476=ORIENTED_EDGE('',*,*,#9477,.F.);+#9477=EDGE_CURVE('',#2392,#3405,#9469,.T.);+#9478=ORIENTED_EDGE('',*,*,#2404,.T.);+#9479=ORIENTED_EDGE('',*,*,#9480,.T.);+#9480=EDGE_CURVE('',#2399,#3409,#9481,.T.);+#9481=LINE('',#9482,#72);+#9482=CARTESIAN_POINT('',(3.25,-0.14,0.65));+#9483=ORIENTED_EDGE('',*,*,#3408,.F.);+#9484=ADVANCED_FACE('',(#9485),#9541,.F.);+#9485=FACE_BOUND('',#9486,.F.);+#9486=EDGE_LOOP('',(#9487,#9488,#9489,#9496,#9501,#9508,#9513,#9518,#9523,#9529,#9534,#9539));+#9487=ORIENTED_EDGE('',*,*,#2398,.F.);+#9488=ORIENTED_EDGE('',*,*,#2409,.T.);+#9489=ORIENTED_EDGE('',*,*,#9490,.T.);+#9490=EDGE_CURVE('',#2410,#9491,#9493,.T.);+#9491=VERTEX_POINT('',#9492);+#9492=CARTESIAN_POINT('',(3.348480775301,-0.14,0.417364817767));+#9493=CIRCLE('',#9494,0.1);+#9494=AXIS2_PLACEMENT_3D('',#9495,#87,#7536);+#9495=CARTESIAN_POINT('',(3.25,-0.14,0.4));+#9496=ORIENTED_EDGE('',*,*,#9497,.T.);+#9497=EDGE_CURVE('',#9491,#9498,#9500,.T.);+#9498=VERTEX_POINT('',#9499);+#9499=CARTESIAN_POINT('',(3.380247108853,-0.14,0.206587955583));+#9500=LINE('',#9492,#7542);+#9501=ORIENTED_EDGE('',*,*,#9502,.T.);+#9502=EDGE_CURVE('',#9498,#9503,#9505,.T.);+#9503=VERTEX_POINT('',#9504);+#9504=CARTESIAN_POINT('',(3.626449047106,-0.14,5.551115123126E-17));+#9505=CIRCLE('',#9506,0.25);+#9506=AXIS2_PLACEMENT_3D('',#9507,#59,#7551);+#9507=CARTESIAN_POINT('',(3.626449047106,-0.14,0.25));+#9508=ORIENTED_EDGE('',*,*,#9509,.T.);+#9509=EDGE_CURVE('',#9503,#9510,#9512,.T.);+#9510=VERTEX_POINT('',#9511);+#9511=CARTESIAN_POINT('',(4.05,-0.14,5.551115123126E-17));+#9512=LINE('',#9504,#27);+#9513=ORIENTED_EDGE('',*,*,#9514,.T.);+#9514=EDGE_CURVE('',#9510,#9515,#9517,.T.);+#9515=VERTEX_POINT('',#9516);+#9516=CARTESIAN_POINT('',(4.05,-0.14,0.15));+#9517=LINE('',#9511,#754);+#9518=ORIENTED_EDGE('',*,*,#9519,.T.);+#9519=EDGE_CURVE('',#9515,#9520,#9522,.T.);+#9520=VERTEX_POINT('',#9521);+#9521=CARTESIAN_POINT('',(3.626449047106,-0.14,0.15));+#9522=LINE('',#9516,#72);+#9523=ORIENTED_EDGE('',*,*,#9524,.T.);+#9524=EDGE_CURVE('',#9520,#9525,#9527,.T.);+#9525=VERTEX_POINT('',#9526);+#9526=CARTESIAN_POINT('',(3.527968271805,-0.14,0.232635182233));+#9527=CIRCLE('',#9528,0.1);+#9528=AXIS2_PLACEMENT_3D('',#9507,#87,#7573);+#9529=ORIENTED_EDGE('',*,*,#9530,.T.);+#9530=EDGE_CURVE('',#9525,#9531,#9533,.T.);+#9531=VERTEX_POINT('',#9532);+#9532=CARTESIAN_POINT('',(3.496201938253,-0.14,0.443412044417));+#9533=LINE('',#9526,#7579);+#9534=ORIENTED_EDGE('',*,*,#9535,.T.);+#9535=EDGE_CURVE('',#9531,#9536,#9537,.T.);+#9536=VERTEX_POINT('',#9482);+#9537=CIRCLE('',#9538,0.25);+#9538=AXIS2_PLACEMENT_3D('',#9495,#59,#7585);+#9539=ORIENTED_EDGE('',*,*,#9540,.T.);+#9540=EDGE_CURVE('',#9536,#2399,#9481,.T.);+#9541=PLANE('',#9542);+#9542=AXIS2_PLACEMENT_3D('',#9543,#59,#13);+#9543=CARTESIAN_POINT('',(3.487377466565,-0.14,0.305338822795));+#9544=ADVANCED_FACE('',(#9545),#9559,.F.);+#9545=FACE_BOUND('',#9546,.F.);+#9546=EDGE_LOOP('',(#9547,#9548,#9555,#9558));+#9547=ORIENTED_EDGE('',*,*,#2422,.T.);+#9548=ORIENTED_EDGE('',*,*,#9549,.T.);+#9549=EDGE_CURVE('',#2417,#9550,#9552,.T.);+#9550=VERTEX_POINT('',#9551);+#9551=CARTESIAN_POINT('',(3.348480775301,-0.36,0.417364817767));+#9552=CIRCLE('',#9553,0.1);+#9553=AXIS2_PLACEMENT_3D('',#9554,#87,#7536);+#9554=CARTESIAN_POINT('',(3.25,-0.36,0.4));+#9555=ORIENTED_EDGE('',*,*,#9556,.F.);+#9556=EDGE_CURVE('',#9491,#9550,#9557,.T.);+#9557=LINE('',#9492,#58);+#9558=ORIENTED_EDGE('',*,*,#9490,.F.);+#9559=CYLINDRICAL_SURFACE('',#9494,0.1);+#9560=ADVANCED_FACE('',(#9561),#9610,.T.);+#9561=FACE_BOUND('',#9562,.T.);+#9562=EDGE_LOOP('',(#2429,#2415,#9548,#9563,#9568,#9575,#9580,#9585,#9590,#9596,#9601,#9607));+#9563=ORIENTED_EDGE('',*,*,#9564,.T.);+#9564=EDGE_CURVE('',#9550,#9565,#9567,.T.);+#9565=VERTEX_POINT('',#9566);+#9566=CARTESIAN_POINT('',(3.380247108853,-0.36,0.206587955583));+#9567=LINE('',#9551,#7542);+#9568=ORIENTED_EDGE('',*,*,#9569,.T.);+#9569=EDGE_CURVE('',#9565,#9570,#9572,.T.);+#9570=VERTEX_POINT('',#9571);+#9571=CARTESIAN_POINT('',(3.626449047106,-0.36,5.551115123126E-17));+#9572=CIRCLE('',#9573,0.25);+#9573=AXIS2_PLACEMENT_3D('',#9574,#59,#7551);+#9574=CARTESIAN_POINT('',(3.626449047106,-0.36,0.25));+#9575=ORIENTED_EDGE('',*,*,#9576,.T.);+#9576=EDGE_CURVE('',#9570,#9577,#9579,.T.);+#9577=VERTEX_POINT('',#9578);+#9578=CARTESIAN_POINT('',(4.05,-0.36,5.551115123126E-17));+#9579=LINE('',#9571,#27);+#9580=ORIENTED_EDGE('',*,*,#9581,.T.);+#9581=EDGE_CURVE('',#9577,#9582,#9584,.T.);+#9582=VERTEX_POINT('',#9583);+#9583=CARTESIAN_POINT('',(4.05,-0.36,0.15));+#9584=LINE('',#9578,#754);+#9585=ORIENTED_EDGE('',*,*,#9586,.T.);+#9586=EDGE_CURVE('',#9582,#9587,#9589,.T.);+#9587=VERTEX_POINT('',#9588);+#9588=CARTESIAN_POINT('',(3.626449047106,-0.36,0.15));+#9589=LINE('',#9583,#72);+#9590=ORIENTED_EDGE('',*,*,#9591,.T.);+#9591=EDGE_CURVE('',#9587,#9592,#9594,.T.);+#9592=VERTEX_POINT('',#9593);+#9593=CARTESIAN_POINT('',(3.527968271805,-0.36,0.232635182233));+#9594=CIRCLE('',#9595,0.1);+#9595=AXIS2_PLACEMENT_3D('',#9574,#87,#7573);+#9596=ORIENTED_EDGE('',*,*,#9597,.T.);+#9597=EDGE_CURVE('',#9592,#9598,#9600,.T.);+#9598=VERTEX_POINT('',#9599);+#9599=CARTESIAN_POINT('',(3.496201938253,-0.36,0.443412044417));+#9600=LINE('',#9593,#7579);+#9601=ORIENTED_EDGE('',*,*,#9602,.T.);+#9602=EDGE_CURVE('',#9598,#9603,#9605,.T.);+#9603=VERTEX_POINT('',#9604);+#9604=CARTESIAN_POINT('',(3.25,-0.36,0.65));+#9605=CIRCLE('',#9606,0.25);+#9606=AXIS2_PLACEMENT_3D('',#9554,#59,#7585);+#9607=ORIENTED_EDGE('',*,*,#9608,.T.);+#9608=EDGE_CURVE('',#9603,#2431,#9609,.T.);+#9609=LINE('',#9604,#72);+#9610=PLANE('',#9611);+#9611=AXIS2_PLACEMENT_3D('',#9612,#59,#13);+#9612=CARTESIAN_POINT('',(3.487377466565,-0.36,0.305338822795));+#9613=ADVANCED_FACE('',(#9614),#724,.F.);+#9614=FACE_BOUND('',#9615,.F.);+#9615=EDGE_LOOP('',(#9616,#9618,#9619,#9623));+#9616=ORIENTED_EDGE('',*,*,#9617,.F.);+#9617=EDGE_CURVE('',#2431,#3413,#9609,.T.);+#9618=ORIENTED_EDGE('',*,*,#2443,.T.);+#9619=ORIENTED_EDGE('',*,*,#9620,.T.);+#9620=EDGE_CURVE('',#2438,#3417,#9621,.T.);+#9621=LINE('',#9622,#72);+#9622=CARTESIAN_POINT('',(3.25,-0.64,0.65));+#9623=ORIENTED_EDGE('',*,*,#3416,.F.);+#9624=ADVANCED_FACE('',(#9625),#9681,.F.);+#9625=FACE_BOUND('',#9626,.F.);+#9626=EDGE_LOOP('',(#9627,#9628,#9629,#9636,#9641,#9648,#9653,#9658,#9663,#9669,#9674,#9679));+#9627=ORIENTED_EDGE('',*,*,#2437,.F.);+#9628=ORIENTED_EDGE('',*,*,#2448,.T.);+#9629=ORIENTED_EDGE('',*,*,#9630,.T.);+#9630=EDGE_CURVE('',#2449,#9631,#9633,.T.);+#9631=VERTEX_POINT('',#9632);+#9632=CARTESIAN_POINT('',(3.348480775301,-0.64,0.417364817767));+#9633=CIRCLE('',#9634,0.1);+#9634=AXIS2_PLACEMENT_3D('',#9635,#87,#7536);+#9635=CARTESIAN_POINT('',(3.25,-0.64,0.4));+#9636=ORIENTED_EDGE('',*,*,#9637,.T.);+#9637=EDGE_CURVE('',#9631,#9638,#9640,.T.);+#9638=VERTEX_POINT('',#9639);+#9639=CARTESIAN_POINT('',(3.380247108853,-0.64,0.206587955583));+#9640=LINE('',#9632,#7542);+#9641=ORIENTED_EDGE('',*,*,#9642,.T.);+#9642=EDGE_CURVE('',#9638,#9643,#9645,.T.);+#9643=VERTEX_POINT('',#9644);+#9644=CARTESIAN_POINT('',(3.626449047106,-0.64,5.551115123126E-17));+#9645=CIRCLE('',#9646,0.25);+#9646=AXIS2_PLACEMENT_3D('',#9647,#59,#7551);+#9647=CARTESIAN_POINT('',(3.626449047106,-0.64,0.25));+#9648=ORIENTED_EDGE('',*,*,#9649,.T.);+#9649=EDGE_CURVE('',#9643,#9650,#9652,.T.);+#9650=VERTEX_POINT('',#9651);+#9651=CARTESIAN_POINT('',(4.05,-0.64,5.551115123126E-17));+#9652=LINE('',#9644,#27);+#9653=ORIENTED_EDGE('',*,*,#9654,.T.);+#9654=EDGE_CURVE('',#9650,#9655,#9657,.T.);+#9655=VERTEX_POINT('',#9656);+#9656=CARTESIAN_POINT('',(4.05,-0.64,0.15));+#9657=LINE('',#9651,#754);+#9658=ORIENTED_EDGE('',*,*,#9659,.T.);+#9659=EDGE_CURVE('',#9655,#9660,#9662,.T.);+#9660=VERTEX_POINT('',#9661);+#9661=CARTESIAN_POINT('',(3.626449047106,-0.64,0.15));+#9662=LINE('',#9656,#72);+#9663=ORIENTED_EDGE('',*,*,#9664,.T.);+#9664=EDGE_CURVE('',#9660,#9665,#9667,.T.);+#9665=VERTEX_POINT('',#9666);+#9666=CARTESIAN_POINT('',(3.527968271805,-0.64,0.232635182233));+#9667=CIRCLE('',#9668,0.1);+#9668=AXIS2_PLACEMENT_3D('',#9647,#87,#7573);+#9669=ORIENTED_EDGE('',*,*,#9670,.T.);+#9670=EDGE_CURVE('',#9665,#9671,#9673,.T.);+#9671=VERTEX_POINT('',#9672);+#9672=CARTESIAN_POINT('',(3.496201938253,-0.64,0.443412044417));+#9673=LINE('',#9666,#7579);+#9674=ORIENTED_EDGE('',*,*,#9675,.T.);+#9675=EDGE_CURVE('',#9671,#9676,#9677,.T.);+#9676=VERTEX_POINT('',#9622);+#9677=CIRCLE('',#9678,0.25);+#9678=AXIS2_PLACEMENT_3D('',#9635,#59,#7585);+#9679=ORIENTED_EDGE('',*,*,#9680,.T.);+#9680=EDGE_CURVE('',#9676,#2438,#9621,.T.);+#9681=PLANE('',#9682);+#9682=AXIS2_PLACEMENT_3D('',#9683,#59,#13);+#9683=CARTESIAN_POINT('',(3.487377466565,-0.64,0.305338822795));+#9684=ADVANCED_FACE('',(#9685),#9699,.F.);+#9685=FACE_BOUND('',#9686,.F.);+#9686=EDGE_LOOP('',(#9687,#9688,#9695,#9698));+#9687=ORIENTED_EDGE('',*,*,#2461,.T.);+#9688=ORIENTED_EDGE('',*,*,#9689,.T.);+#9689=EDGE_CURVE('',#2456,#9690,#9692,.T.);+#9690=VERTEX_POINT('',#9691);+#9691=CARTESIAN_POINT('',(3.348480775301,-0.86,0.417364817767));+#9692=CIRCLE('',#9693,0.1);+#9693=AXIS2_PLACEMENT_3D('',#9694,#87,#7536);+#9694=CARTESIAN_POINT('',(3.25,-0.86,0.4));+#9695=ORIENTED_EDGE('',*,*,#9696,.F.);+#9696=EDGE_CURVE('',#9631,#9690,#9697,.T.);+#9697=LINE('',#9632,#58);+#9698=ORIENTED_EDGE('',*,*,#9630,.F.);+#9699=CYLINDRICAL_SURFACE('',#9634,0.1);+#9700=ADVANCED_FACE('',(#9701),#9750,.T.);+#9701=FACE_BOUND('',#9702,.T.);+#9702=EDGE_LOOP('',(#2468,#2454,#9688,#9703,#9708,#9715,#9720,#9725,#9730,#9736,#9741,#9747));+#9703=ORIENTED_EDGE('',*,*,#9704,.T.);+#9704=EDGE_CURVE('',#9690,#9705,#9707,.T.);+#9705=VERTEX_POINT('',#9706);+#9706=CARTESIAN_POINT('',(3.380247108853,-0.86,0.206587955583));+#9707=LINE('',#9691,#7542);+#9708=ORIENTED_EDGE('',*,*,#9709,.T.);+#9709=EDGE_CURVE('',#9705,#9710,#9712,.T.);+#9710=VERTEX_POINT('',#9711);+#9711=CARTESIAN_POINT('',(3.626449047106,-0.86,5.551115123126E-17));+#9712=CIRCLE('',#9713,0.25);+#9713=AXIS2_PLACEMENT_3D('',#9714,#59,#7551);+#9714=CARTESIAN_POINT('',(3.626449047106,-0.86,0.25));+#9715=ORIENTED_EDGE('',*,*,#9716,.T.);+#9716=EDGE_CURVE('',#9710,#9717,#9719,.T.);+#9717=VERTEX_POINT('',#9718);+#9718=CARTESIAN_POINT('',(4.05,-0.86,5.551115123126E-17));+#9719=LINE('',#9711,#27);+#9720=ORIENTED_EDGE('',*,*,#9721,.T.);+#9721=EDGE_CURVE('',#9717,#9722,#9724,.T.);+#9722=VERTEX_POINT('',#9723);+#9723=CARTESIAN_POINT('',(4.05,-0.86,0.15));+#9724=LINE('',#9718,#754);+#9725=ORIENTED_EDGE('',*,*,#9726,.T.);+#9726=EDGE_CURVE('',#9722,#9727,#9729,.T.);+#9727=VERTEX_POINT('',#9728);+#9728=CARTESIAN_POINT('',(3.626449047106,-0.86,0.15));+#9729=LINE('',#9723,#72);+#9730=ORIENTED_EDGE('',*,*,#9731,.T.);+#9731=EDGE_CURVE('',#9727,#9732,#9734,.T.);+#9732=VERTEX_POINT('',#9733);+#9733=CARTESIAN_POINT('',(3.527968271805,-0.86,0.232635182233));+#9734=CIRCLE('',#9735,0.1);+#9735=AXIS2_PLACEMENT_3D('',#9714,#87,#7573);+#9736=ORIENTED_EDGE('',*,*,#9737,.T.);+#9737=EDGE_CURVE('',#9732,#9738,#9740,.T.);+#9738=VERTEX_POINT('',#9739);+#9739=CARTESIAN_POINT('',(3.496201938253,-0.86,0.443412044417));+#9740=LINE('',#9733,#7579);+#9741=ORIENTED_EDGE('',*,*,#9742,.T.);+#9742=EDGE_CURVE('',#9738,#9743,#9745,.T.);+#9743=VERTEX_POINT('',#9744);+#9744=CARTESIAN_POINT('',(3.25,-0.86,0.65));+#9745=CIRCLE('',#9746,0.25);+#9746=AXIS2_PLACEMENT_3D('',#9694,#59,#7585);+#9747=ORIENTED_EDGE('',*,*,#9748,.T.);+#9748=EDGE_CURVE('',#9743,#2470,#9749,.T.);+#9749=LINE('',#9744,#72);+#9750=PLANE('',#9751);+#9751=AXIS2_PLACEMENT_3D('',#9752,#59,#13);+#9752=CARTESIAN_POINT('',(3.487377466565,-0.86,0.305338822795));+#9753=ADVANCED_FACE('',(#9754),#724,.F.);+#9754=FACE_BOUND('',#9755,.F.);+#9755=EDGE_LOOP('',(#9756,#9758,#9759,#9763));+#9756=ORIENTED_EDGE('',*,*,#9757,.F.);+#9757=EDGE_CURVE('',#2470,#3421,#9749,.T.);+#9758=ORIENTED_EDGE('',*,*,#2482,.T.);+#9759=ORIENTED_EDGE('',*,*,#9760,.T.);+#9760=EDGE_CURVE('',#2477,#3425,#9761,.T.);+#9761=LINE('',#9762,#72);+#9762=CARTESIAN_POINT('',(3.25,-1.14,0.65));+#9763=ORIENTED_EDGE('',*,*,#3424,.F.);+#9764=ADVANCED_FACE('',(#9765),#9821,.F.);+#9765=FACE_BOUND('',#9766,.F.);+#9766=EDGE_LOOP('',(#9767,#9768,#9769,#9776,#9781,#9788,#9793,#9798,#9803,#9809,#9814,#9819));+#9767=ORIENTED_EDGE('',*,*,#2476,.F.);+#9768=ORIENTED_EDGE('',*,*,#2487,.T.);+#9769=ORIENTED_EDGE('',*,*,#9770,.T.);+#9770=EDGE_CURVE('',#2488,#9771,#9773,.T.);+#9771=VERTEX_POINT('',#9772);+#9772=CARTESIAN_POINT('',(3.348480775301,-1.14,0.417364817767));+#9773=CIRCLE('',#9774,0.1);+#9774=AXIS2_PLACEMENT_3D('',#9775,#87,#7536);+#9775=CARTESIAN_POINT('',(3.25,-1.14,0.4));+#9776=ORIENTED_EDGE('',*,*,#9777,.T.);+#9777=EDGE_CURVE('',#9771,#9778,#9780,.T.);+#9778=VERTEX_POINT('',#9779);+#9779=CARTESIAN_POINT('',(3.380247108853,-1.14,0.206587955583));+#9780=LINE('',#9772,#7542);+#9781=ORIENTED_EDGE('',*,*,#9782,.T.);+#9782=EDGE_CURVE('',#9778,#9783,#9785,.T.);+#9783=VERTEX_POINT('',#9784);+#9784=CARTESIAN_POINT('',(3.626449047106,-1.14,5.551115123126E-17));+#9785=CIRCLE('',#9786,0.25);+#9786=AXIS2_PLACEMENT_3D('',#9787,#59,#7551);+#9787=CARTESIAN_POINT('',(3.626449047106,-1.14,0.25));+#9788=ORIENTED_EDGE('',*,*,#9789,.T.);+#9789=EDGE_CURVE('',#9783,#9790,#9792,.T.);+#9790=VERTEX_POINT('',#9791);+#9791=CARTESIAN_POINT('',(4.05,-1.14,5.551115123126E-17));+#9792=LINE('',#9784,#27);+#9793=ORIENTED_EDGE('',*,*,#9794,.T.);+#9794=EDGE_CURVE('',#9790,#9795,#9797,.T.);+#9795=VERTEX_POINT('',#9796);+#9796=CARTESIAN_POINT('',(4.05,-1.14,0.15));+#9797=LINE('',#9791,#754);+#9798=ORIENTED_EDGE('',*,*,#9799,.T.);+#9799=EDGE_CURVE('',#9795,#9800,#9802,.T.);+#9800=VERTEX_POINT('',#9801);+#9801=CARTESIAN_POINT('',(3.626449047106,-1.14,0.15));+#9802=LINE('',#9796,#72);+#9803=ORIENTED_EDGE('',*,*,#9804,.T.);+#9804=EDGE_CURVE('',#9800,#9805,#9807,.T.);+#9805=VERTEX_POINT('',#9806);+#9806=CARTESIAN_POINT('',(3.527968271805,-1.14,0.232635182233));+#9807=CIRCLE('',#9808,0.1);+#9808=AXIS2_PLACEMENT_3D('',#9787,#87,#7573);+#9809=ORIENTED_EDGE('',*,*,#9810,.T.);+#9810=EDGE_CURVE('',#9805,#9811,#9813,.T.);+#9811=VERTEX_POINT('',#9812);+#9812=CARTESIAN_POINT('',(3.496201938253,-1.14,0.443412044417));+#9813=LINE('',#9806,#7579);+#9814=ORIENTED_EDGE('',*,*,#9815,.T.);+#9815=EDGE_CURVE('',#9811,#9816,#9817,.T.);+#9816=VERTEX_POINT('',#9762);+#9817=CIRCLE('',#9818,0.25);+#9818=AXIS2_PLACEMENT_3D('',#9775,#59,#7585);+#9819=ORIENTED_EDGE('',*,*,#9820,.T.);+#9820=EDGE_CURVE('',#9816,#2477,#9761,.T.);+#9821=PLANE('',#9822);+#9822=AXIS2_PLACEMENT_3D('',#9823,#59,#13);+#9823=CARTESIAN_POINT('',(3.487377466565,-1.14,0.305338822795));+#9824=ADVANCED_FACE('',(#9825),#9839,.F.);+#9825=FACE_BOUND('',#9826,.F.);+#9826=EDGE_LOOP('',(#9827,#9828,#9835,#9838));+#9827=ORIENTED_EDGE('',*,*,#2500,.T.);+#9828=ORIENTED_EDGE('',*,*,#9829,.T.);+#9829=EDGE_CURVE('',#2495,#9830,#9832,.T.);+#9830=VERTEX_POINT('',#9831);+#9831=CARTESIAN_POINT('',(3.348480775301,-1.36,0.417364817767));+#9832=CIRCLE('',#9833,0.1);+#9833=AXIS2_PLACEMENT_3D('',#9834,#87,#7536);+#9834=CARTESIAN_POINT('',(3.25,-1.36,0.4));+#9835=ORIENTED_EDGE('',*,*,#9836,.F.);+#9836=EDGE_CURVE('',#9771,#9830,#9837,.T.);+#9837=LINE('',#9772,#58);+#9838=ORIENTED_EDGE('',*,*,#9770,.F.);+#9839=CYLINDRICAL_SURFACE('',#9774,0.1);+#9840=ADVANCED_FACE('',(#9841),#9890,.T.);+#9841=FACE_BOUND('',#9842,.T.);+#9842=EDGE_LOOP('',(#2507,#2493,#9828,#9843,#9848,#9855,#9860,#9865,#9870,#9876,#9881,#9887));+#9843=ORIENTED_EDGE('',*,*,#9844,.T.);+#9844=EDGE_CURVE('',#9830,#9845,#9847,.T.);+#9845=VERTEX_POINT('',#9846);+#9846=CARTESIAN_POINT('',(3.380247108853,-1.36,0.206587955583));+#9847=LINE('',#9831,#7542);+#9848=ORIENTED_EDGE('',*,*,#9849,.T.);+#9849=EDGE_CURVE('',#9845,#9850,#9852,.T.);+#9850=VERTEX_POINT('',#9851);+#9851=CARTESIAN_POINT('',(3.626449047106,-1.36,5.551115123126E-17));+#9852=CIRCLE('',#9853,0.25);+#9853=AXIS2_PLACEMENT_3D('',#9854,#59,#7551);+#9854=CARTESIAN_POINT('',(3.626449047106,-1.36,0.25));+#9855=ORIENTED_EDGE('',*,*,#9856,.T.);+#9856=EDGE_CURVE('',#9850,#9857,#9859,.T.);+#9857=VERTEX_POINT('',#9858);+#9858=CARTESIAN_POINT('',(4.05,-1.36,5.551115123126E-17));+#9859=LINE('',#9851,#27);+#9860=ORIENTED_EDGE('',*,*,#9861,.T.);+#9861=EDGE_CURVE('',#9857,#9862,#9864,.T.);+#9862=VERTEX_POINT('',#9863);+#9863=CARTESIAN_POINT('',(4.05,-1.36,0.15));+#9864=LINE('',#9858,#754);+#9865=ORIENTED_EDGE('',*,*,#9866,.T.);+#9866=EDGE_CURVE('',#9862,#9867,#9869,.T.);+#9867=VERTEX_POINT('',#9868);+#9868=CARTESIAN_POINT('',(3.626449047106,-1.36,0.15));+#9869=LINE('',#9863,#72);+#9870=ORIENTED_EDGE('',*,*,#9871,.T.);+#9871=EDGE_CURVE('',#9867,#9872,#9874,.T.);+#9872=VERTEX_POINT('',#9873);+#9873=CARTESIAN_POINT('',(3.527968271805,-1.36,0.232635182233));+#9874=CIRCLE('',#9875,0.1);+#9875=AXIS2_PLACEMENT_3D('',#9854,#87,#7573);+#9876=ORIENTED_EDGE('',*,*,#9877,.T.);+#9877=EDGE_CURVE('',#9872,#9878,#9880,.T.);+#9878=VERTEX_POINT('',#9879);+#9879=CARTESIAN_POINT('',(3.496201938253,-1.36,0.443412044417));+#9880=LINE('',#9873,#7579);+#9881=ORIENTED_EDGE('',*,*,#9882,.T.);+#9882=EDGE_CURVE('',#9878,#9883,#9885,.T.);+#9883=VERTEX_POINT('',#9884);+#9884=CARTESIAN_POINT('',(3.25,-1.36,0.65));+#9885=CIRCLE('',#9886,0.25);+#9886=AXIS2_PLACEMENT_3D('',#9834,#59,#7585);+#9887=ORIENTED_EDGE('',*,*,#9888,.T.);+#9888=EDGE_CURVE('',#9883,#2509,#9889,.T.);+#9889=LINE('',#9884,#72);+#9890=PLANE('',#9891);+#9891=AXIS2_PLACEMENT_3D('',#9892,#59,#13);+#9892=CARTESIAN_POINT('',(3.487377466565,-1.36,0.305338822795));+#9893=ADVANCED_FACE('',(#9894),#724,.F.);+#9894=FACE_BOUND('',#9895,.F.);+#9895=EDGE_LOOP('',(#9896,#9898,#9899,#9903));+#9896=ORIENTED_EDGE('',*,*,#9897,.F.);+#9897=EDGE_CURVE('',#2509,#3429,#9889,.T.);+#9898=ORIENTED_EDGE('',*,*,#2521,.T.);+#9899=ORIENTED_EDGE('',*,*,#9900,.T.);+#9900=EDGE_CURVE('',#2516,#3433,#9901,.T.);+#9901=LINE('',#9902,#72);+#9902=CARTESIAN_POINT('',(3.25,-1.64,0.65));+#9903=ORIENTED_EDGE('',*,*,#3432,.F.);+#9904=ADVANCED_FACE('',(#9905),#9961,.F.);+#9905=FACE_BOUND('',#9906,.F.);+#9906=EDGE_LOOP('',(#9907,#9908,#9909,#9916,#9921,#9928,#9933,#9938,#9943,#9949,#9954,#9959));+#9907=ORIENTED_EDGE('',*,*,#2515,.F.);+#9908=ORIENTED_EDGE('',*,*,#2526,.T.);+#9909=ORIENTED_EDGE('',*,*,#9910,.T.);+#9910=EDGE_CURVE('',#2527,#9911,#9913,.T.);+#9911=VERTEX_POINT('',#9912);+#9912=CARTESIAN_POINT('',(3.348480775301,-1.64,0.417364817767));+#9913=CIRCLE('',#9914,0.1);+#9914=AXIS2_PLACEMENT_3D('',#9915,#87,#7536);+#9915=CARTESIAN_POINT('',(3.25,-1.64,0.4));+#9916=ORIENTED_EDGE('',*,*,#9917,.T.);+#9917=EDGE_CURVE('',#9911,#9918,#9920,.T.);+#9918=VERTEX_POINT('',#9919);+#9919=CARTESIAN_POINT('',(3.380247108853,-1.64,0.206587955583));+#9920=LINE('',#9912,#7542);+#9921=ORIENTED_EDGE('',*,*,#9922,.T.);+#9922=EDGE_CURVE('',#9918,#9923,#9925,.T.);+#9923=VERTEX_POINT('',#9924);+#9924=CARTESIAN_POINT('',(3.626449047106,-1.64,5.551115123126E-17));+#9925=CIRCLE('',#9926,0.25);+#9926=AXIS2_PLACEMENT_3D('',#9927,#59,#7551);+#9927=CARTESIAN_POINT('',(3.626449047106,-1.64,0.25));+#9928=ORIENTED_EDGE('',*,*,#9929,.T.);+#9929=EDGE_CURVE('',#9923,#9930,#9932,.T.);+#9930=VERTEX_POINT('',#9931);+#9931=CARTESIAN_POINT('',(4.05,-1.64,5.551115123126E-17));+#9932=LINE('',#9924,#27);+#9933=ORIENTED_EDGE('',*,*,#9934,.T.);+#9934=EDGE_CURVE('',#9930,#9935,#9937,.T.);+#9935=VERTEX_POINT('',#9936);+#9936=CARTESIAN_POINT('',(4.05,-1.64,0.15));+#9937=LINE('',#9931,#754);+#9938=ORIENTED_EDGE('',*,*,#9939,.T.);+#9939=EDGE_CURVE('',#9935,#9940,#9942,.T.);+#9940=VERTEX_POINT('',#9941);+#9941=CARTESIAN_POINT('',(3.626449047106,-1.64,0.15));+#9942=LINE('',#9936,#72);+#9943=ORIENTED_EDGE('',*,*,#9944,.T.);+#9944=EDGE_CURVE('',#9940,#9945,#9947,.T.);+#9945=VERTEX_POINT('',#9946);+#9946=CARTESIAN_POINT('',(3.527968271805,-1.64,0.232635182233));+#9947=CIRCLE('',#9948,0.1);+#9948=AXIS2_PLACEMENT_3D('',#9927,#87,#7573);+#9949=ORIENTED_EDGE('',*,*,#9950,.T.);+#9950=EDGE_CURVE('',#9945,#9951,#9953,.T.);+#9951=VERTEX_POINT('',#9952);+#9952=CARTESIAN_POINT('',(3.496201938253,-1.64,0.443412044417));+#9953=LINE('',#9946,#7579);+#9954=ORIENTED_EDGE('',*,*,#9955,.T.);+#9955=EDGE_CURVE('',#9951,#9956,#9957,.T.);+#9956=VERTEX_POINT('',#9902);+#9957=CIRCLE('',#9958,0.25);+#9958=AXIS2_PLACEMENT_3D('',#9915,#59,#7585);+#9959=ORIENTED_EDGE('',*,*,#9960,.T.);+#9960=EDGE_CURVE('',#9956,#2516,#9901,.T.);+#9961=PLANE('',#9962);+#9962=AXIS2_PLACEMENT_3D('',#9963,#59,#13);+#9963=CARTESIAN_POINT('',(3.487377466565,-1.64,0.305338822795));+#9964=ADVANCED_FACE('',(#9965),#9979,.F.);+#9965=FACE_BOUND('',#9966,.F.);+#9966=EDGE_LOOP('',(#9967,#9968,#9975,#9978));+#9967=ORIENTED_EDGE('',*,*,#2539,.T.);+#9968=ORIENTED_EDGE('',*,*,#9969,.T.);+#9969=EDGE_CURVE('',#2534,#9970,#9972,.T.);+#9970=VERTEX_POINT('',#9971);+#9971=CARTESIAN_POINT('',(3.348480775301,-1.86,0.417364817767));+#9972=CIRCLE('',#9973,0.1);+#9973=AXIS2_PLACEMENT_3D('',#9974,#87,#7536);+#9974=CARTESIAN_POINT('',(3.25,-1.86,0.4));+#9975=ORIENTED_EDGE('',*,*,#9976,.F.);+#9976=EDGE_CURVE('',#9911,#9970,#9977,.T.);+#9977=LINE('',#9912,#58);+#9978=ORIENTED_EDGE('',*,*,#9910,.F.);+#9979=CYLINDRICAL_SURFACE('',#9914,0.1);+#9980=ADVANCED_FACE('',(#9981),#10030,.T.);+#9981=FACE_BOUND('',#9982,.T.);+#9982=EDGE_LOOP('',(#2546,#2532,#9968,#9983,#9988,#9995,#10000,#10005,#10010,#10016,#10021,#10027));+#9983=ORIENTED_EDGE('',*,*,#9984,.T.);+#9984=EDGE_CURVE('',#9970,#9985,#9987,.T.);+#9985=VERTEX_POINT('',#9986);+#9986=CARTESIAN_POINT('',(3.380247108853,-1.86,0.206587955583));+#9987=LINE('',#9971,#7542);+#9988=ORIENTED_EDGE('',*,*,#9989,.T.);+#9989=EDGE_CURVE('',#9985,#9990,#9992,.T.);+#9990=VERTEX_POINT('',#9991);+#9991=CARTESIAN_POINT('',(3.626449047106,-1.86,5.551115123126E-17));+#9992=CIRCLE('',#9993,0.25);+#9993=AXIS2_PLACEMENT_3D('',#9994,#59,#7551);+#9994=CARTESIAN_POINT('',(3.626449047106,-1.86,0.25));+#9995=ORIENTED_EDGE('',*,*,#9996,.T.);+#9996=EDGE_CURVE('',#9990,#9997,#9999,.T.);+#9997=VERTEX_POINT('',#9998);+#9998=CARTESIAN_POINT('',(4.05,-1.86,5.551115123126E-17));+#9999=LINE('',#9991,#27);+#10000=ORIENTED_EDGE('',*,*,#10001,.T.);+#10001=EDGE_CURVE('',#9997,#10002,#10004,.T.);+#10002=VERTEX_POINT('',#10003);+#10003=CARTESIAN_POINT('',(4.05,-1.86,0.15));+#10004=LINE('',#9998,#754);+#10005=ORIENTED_EDGE('',*,*,#10006,.T.);+#10006=EDGE_CURVE('',#10002,#10007,#10009,.T.);+#10007=VERTEX_POINT('',#10008);+#10008=CARTESIAN_POINT('',(3.626449047106,-1.86,0.15));+#10009=LINE('',#10003,#72);+#10010=ORIENTED_EDGE('',*,*,#10011,.T.);+#10011=EDGE_CURVE('',#10007,#10012,#10014,.T.);+#10012=VERTEX_POINT('',#10013);+#10013=CARTESIAN_POINT('',(3.527968271805,-1.86,0.232635182233));+#10014=CIRCLE('',#10015,0.1);+#10015=AXIS2_PLACEMENT_3D('',#9994,#87,#7573);+#10016=ORIENTED_EDGE('',*,*,#10017,.T.);+#10017=EDGE_CURVE('',#10012,#10018,#10020,.T.);+#10018=VERTEX_POINT('',#10019);+#10019=CARTESIAN_POINT('',(3.496201938253,-1.86,0.443412044417));+#10020=LINE('',#10013,#7579);+#10021=ORIENTED_EDGE('',*,*,#10022,.T.);+#10022=EDGE_CURVE('',#10018,#10023,#10025,.T.);+#10023=VERTEX_POINT('',#10024);+#10024=CARTESIAN_POINT('',(3.25,-1.86,0.65));+#10025=CIRCLE('',#10026,0.25);+#10026=AXIS2_PLACEMENT_3D('',#9974,#59,#7585);+#10027=ORIENTED_EDGE('',*,*,#10028,.T.);+#10028=EDGE_CURVE('',#10023,#2548,#10029,.T.);+#10029=LINE('',#10024,#72);+#10030=PLANE('',#10031);+#10031=AXIS2_PLACEMENT_3D('',#10032,#59,#13);+#10032=CARTESIAN_POINT('',(3.487377466565,-1.86,0.305338822795));+#10033=ADVANCED_FACE('',(#10034),#724,.F.);+#10034=FACE_BOUND('',#10035,.F.);+#10035=EDGE_LOOP('',(#10036,#10038,#10039,#10043));+#10036=ORIENTED_EDGE('',*,*,#10037,.F.);+#10037=EDGE_CURVE('',#2548,#3437,#10029,.T.);+#10038=ORIENTED_EDGE('',*,*,#2560,.T.);+#10039=ORIENTED_EDGE('',*,*,#10040,.T.);+#10040=EDGE_CURVE('',#2555,#3441,#10041,.T.);+#10041=LINE('',#10042,#72);+#10042=CARTESIAN_POINT('',(3.25,-2.14,0.65));+#10043=ORIENTED_EDGE('',*,*,#3440,.F.);+#10044=ADVANCED_FACE('',(#10045),#10101,.F.);+#10045=FACE_BOUND('',#10046,.F.);+#10046=EDGE_LOOP('',(#10047,#10048,#10049,#10056,#10061,#10068,#10073,#10078,#10083,#10089,#10094,#10099));+#10047=ORIENTED_EDGE('',*,*,#2554,.F.);+#10048=ORIENTED_EDGE('',*,*,#2565,.T.);+#10049=ORIENTED_EDGE('',*,*,#10050,.T.);+#10050=EDGE_CURVE('',#2566,#10051,#10053,.T.);+#10051=VERTEX_POINT('',#10052);+#10052=CARTESIAN_POINT('',(3.348480775301,-2.14,0.417364817767));+#10053=CIRCLE('',#10054,0.1);+#10054=AXIS2_PLACEMENT_3D('',#10055,#87,#7536);+#10055=CARTESIAN_POINT('',(3.25,-2.14,0.4));+#10056=ORIENTED_EDGE('',*,*,#10057,.T.);+#10057=EDGE_CURVE('',#10051,#10058,#10060,.T.);+#10058=VERTEX_POINT('',#10059);+#10059=CARTESIAN_POINT('',(3.380247108853,-2.14,0.206587955583));+#10060=LINE('',#10052,#7542);+#10061=ORIENTED_EDGE('',*,*,#10062,.T.);+#10062=EDGE_CURVE('',#10058,#10063,#10065,.T.);+#10063=VERTEX_POINT('',#10064);+#10064=CARTESIAN_POINT('',(3.626449047106,-2.14,5.551115123126E-17));+#10065=CIRCLE('',#10066,0.25);+#10066=AXIS2_PLACEMENT_3D('',#10067,#59,#7551);+#10067=CARTESIAN_POINT('',(3.626449047106,-2.14,0.25));+#10068=ORIENTED_EDGE('',*,*,#10069,.T.);+#10069=EDGE_CURVE('',#10063,#10070,#10072,.T.);+#10070=VERTEX_POINT('',#10071);+#10071=CARTESIAN_POINT('',(4.05,-2.14,5.551115123126E-17));+#10072=LINE('',#10064,#27);+#10073=ORIENTED_EDGE('',*,*,#10074,.T.);+#10074=EDGE_CURVE('',#10070,#10075,#10077,.T.);+#10075=VERTEX_POINT('',#10076);+#10076=CARTESIAN_POINT('',(4.05,-2.14,0.15));+#10077=LINE('',#10071,#754);+#10078=ORIENTED_EDGE('',*,*,#10079,.T.);+#10079=EDGE_CURVE('',#10075,#10080,#10082,.T.);+#10080=VERTEX_POINT('',#10081);+#10081=CARTESIAN_POINT('',(3.626449047106,-2.14,0.15));+#10082=LINE('',#10076,#72);+#10083=ORIENTED_EDGE('',*,*,#10084,.T.);+#10084=EDGE_CURVE('',#10080,#10085,#10087,.T.);+#10085=VERTEX_POINT('',#10086);+#10086=CARTESIAN_POINT('',(3.527968271805,-2.14,0.232635182233));+#10087=CIRCLE('',#10088,0.1);+#10088=AXIS2_PLACEMENT_3D('',#10067,#87,#7573);+#10089=ORIENTED_EDGE('',*,*,#10090,.T.);+#10090=EDGE_CURVE('',#10085,#10091,#10093,.T.);+#10091=VERTEX_POINT('',#10092);+#10092=CARTESIAN_POINT('',(3.496201938253,-2.14,0.443412044417));+#10093=LINE('',#10086,#7579);+#10094=ORIENTED_EDGE('',*,*,#10095,.T.);+#10095=EDGE_CURVE('',#10091,#10096,#10097,.T.);+#10096=VERTEX_POINT('',#10042);+#10097=CIRCLE('',#10098,0.25);+#10098=AXIS2_PLACEMENT_3D('',#10055,#59,#7585);+#10099=ORIENTED_EDGE('',*,*,#10100,.T.);+#10100=EDGE_CURVE('',#10096,#2555,#10041,.T.);+#10101=PLANE('',#10102);+#10102=AXIS2_PLACEMENT_3D('',#10103,#59,#13);+#10103=CARTESIAN_POINT('',(3.487377466565,-2.14,0.305338822795));+#10104=ADVANCED_FACE('',(#10105),#10119,.F.);+#10105=FACE_BOUND('',#10106,.F.);+#10106=EDGE_LOOP('',(#10107,#10108,#10115,#10118));+#10107=ORIENTED_EDGE('',*,*,#2578,.T.);+#10108=ORIENTED_EDGE('',*,*,#10109,.T.);+#10109=EDGE_CURVE('',#2573,#10110,#10112,.T.);+#10110=VERTEX_POINT('',#10111);+#10111=CARTESIAN_POINT('',(3.348480775301,-2.36,0.417364817767));+#10112=CIRCLE('',#10113,0.1);+#10113=AXIS2_PLACEMENT_3D('',#10114,#87,#7536);+#10114=CARTESIAN_POINT('',(3.25,-2.36,0.4));+#10115=ORIENTED_EDGE('',*,*,#10116,.F.);+#10116=EDGE_CURVE('',#10051,#10110,#10117,.T.);+#10117=LINE('',#10052,#58);+#10118=ORIENTED_EDGE('',*,*,#10050,.F.);+#10119=CYLINDRICAL_SURFACE('',#10054,0.1);+#10120=ADVANCED_FACE('',(#10121),#10170,.T.);+#10121=FACE_BOUND('',#10122,.T.);+#10122=EDGE_LOOP('',(#2585,#2571,#10108,#10123,#10128,#10135,#10140,#10145,#10150,#10156,#10161,#10167));+#10123=ORIENTED_EDGE('',*,*,#10124,.T.);+#10124=EDGE_CURVE('',#10110,#10125,#10127,.T.);+#10125=VERTEX_POINT('',#10126);+#10126=CARTESIAN_POINT('',(3.380247108853,-2.36,0.206587955583));+#10127=LINE('',#10111,#7542);+#10128=ORIENTED_EDGE('',*,*,#10129,.T.);+#10129=EDGE_CURVE('',#10125,#10130,#10132,.T.);+#10130=VERTEX_POINT('',#10131);+#10131=CARTESIAN_POINT('',(3.626449047106,-2.36,5.551115123126E-17));+#10132=CIRCLE('',#10133,0.25);+#10133=AXIS2_PLACEMENT_3D('',#10134,#59,#7551);+#10134=CARTESIAN_POINT('',(3.626449047106,-2.36,0.25));+#10135=ORIENTED_EDGE('',*,*,#10136,.T.);+#10136=EDGE_CURVE('',#10130,#10137,#10139,.T.);+#10137=VERTEX_POINT('',#10138);+#10138=CARTESIAN_POINT('',(4.05,-2.36,5.551115123126E-17));+#10139=LINE('',#10131,#27);+#10140=ORIENTED_EDGE('',*,*,#10141,.T.);+#10141=EDGE_CURVE('',#10137,#10142,#10144,.T.);+#10142=VERTEX_POINT('',#10143);+#10143=CARTESIAN_POINT('',(4.05,-2.36,0.15));+#10144=LINE('',#10138,#754);+#10145=ORIENTED_EDGE('',*,*,#10146,.T.);+#10146=EDGE_CURVE('',#10142,#10147,#10149,.T.);+#10147=VERTEX_POINT('',#10148);+#10148=CARTESIAN_POINT('',(3.626449047106,-2.36,0.15));+#10149=LINE('',#10143,#72);+#10150=ORIENTED_EDGE('',*,*,#10151,.T.);+#10151=EDGE_CURVE('',#10147,#10152,#10154,.T.);+#10152=VERTEX_POINT('',#10153);+#10153=CARTESIAN_POINT('',(3.527968271805,-2.36,0.232635182233));+#10154=CIRCLE('',#10155,0.1);+#10155=AXIS2_PLACEMENT_3D('',#10134,#87,#7573);+#10156=ORIENTED_EDGE('',*,*,#10157,.T.);+#10157=EDGE_CURVE('',#10152,#10158,#10160,.T.);+#10158=VERTEX_POINT('',#10159);+#10159=CARTESIAN_POINT('',(3.496201938253,-2.36,0.443412044417));+#10160=LINE('',#10153,#7579);+#10161=ORIENTED_EDGE('',*,*,#10162,.T.);+#10162=EDGE_CURVE('',#10158,#10163,#10165,.T.);+#10163=VERTEX_POINT('',#10164);+#10164=CARTESIAN_POINT('',(3.25,-2.36,0.65));+#10165=CIRCLE('',#10166,0.25);+#10166=AXIS2_PLACEMENT_3D('',#10114,#59,#7585);+#10167=ORIENTED_EDGE('',*,*,#10168,.T.);+#10168=EDGE_CURVE('',#10163,#2587,#10169,.T.);+#10169=LINE('',#10164,#72);+#10170=PLANE('',#10171);+#10171=AXIS2_PLACEMENT_3D('',#10172,#59,#13);+#10172=CARTESIAN_POINT('',(3.487377466565,-2.36,0.305338822795));+#10173=ADVANCED_FACE('',(#10174),#724,.F.);+#10174=FACE_BOUND('',#10175,.F.);+#10175=EDGE_LOOP('',(#10176,#10178,#10179,#10183));+#10176=ORIENTED_EDGE('',*,*,#10177,.F.);+#10177=EDGE_CURVE('',#2587,#3445,#10169,.T.);+#10178=ORIENTED_EDGE('',*,*,#2599,.T.);+#10179=ORIENTED_EDGE('',*,*,#10180,.T.);+#10180=EDGE_CURVE('',#2594,#3449,#10181,.T.);+#10181=LINE('',#10182,#72);+#10182=CARTESIAN_POINT('',(3.25,-2.64,0.65));+#10183=ORIENTED_EDGE('',*,*,#3448,.F.);+#10184=ADVANCED_FACE('',(#10185),#10241,.F.);+#10185=FACE_BOUND('',#10186,.F.);+#10186=EDGE_LOOP('',(#10187,#10188,#10189,#10196,#10201,#10208,#10213,#10218,#10223,#10229,#10234,#10239));+#10187=ORIENTED_EDGE('',*,*,#2593,.F.);+#10188=ORIENTED_EDGE('',*,*,#2604,.T.);+#10189=ORIENTED_EDGE('',*,*,#10190,.T.);+#10190=EDGE_CURVE('',#2605,#10191,#10193,.T.);+#10191=VERTEX_POINT('',#10192);+#10192=CARTESIAN_POINT('',(3.348480775301,-2.64,0.417364817767));+#10193=CIRCLE('',#10194,0.1);+#10194=AXIS2_PLACEMENT_3D('',#10195,#87,#7536);+#10195=CARTESIAN_POINT('',(3.25,-2.64,0.4));+#10196=ORIENTED_EDGE('',*,*,#10197,.T.);+#10197=EDGE_CURVE('',#10191,#10198,#10200,.T.);+#10198=VERTEX_POINT('',#10199);+#10199=CARTESIAN_POINT('',(3.380247108853,-2.64,0.206587955583));+#10200=LINE('',#10192,#7542);+#10201=ORIENTED_EDGE('',*,*,#10202,.T.);+#10202=EDGE_CURVE('',#10198,#10203,#10205,.T.);+#10203=VERTEX_POINT('',#10204);+#10204=CARTESIAN_POINT('',(3.626449047106,-2.64,5.551115123126E-17));+#10205=CIRCLE('',#10206,0.25);+#10206=AXIS2_PLACEMENT_3D('',#10207,#59,#7551);+#10207=CARTESIAN_POINT('',(3.626449047106,-2.64,0.25));+#10208=ORIENTED_EDGE('',*,*,#10209,.T.);+#10209=EDGE_CURVE('',#10203,#10210,#10212,.T.);+#10210=VERTEX_POINT('',#10211);+#10211=CARTESIAN_POINT('',(4.05,-2.64,5.551115123126E-17));+#10212=LINE('',#10204,#27);+#10213=ORIENTED_EDGE('',*,*,#10214,.T.);+#10214=EDGE_CURVE('',#10210,#10215,#10217,.T.);+#10215=VERTEX_POINT('',#10216);+#10216=CARTESIAN_POINT('',(4.05,-2.64,0.15));+#10217=LINE('',#10211,#754);+#10218=ORIENTED_EDGE('',*,*,#10219,.T.);+#10219=EDGE_CURVE('',#10215,#10220,#10222,.T.);+#10220=VERTEX_POINT('',#10221);+#10221=CARTESIAN_POINT('',(3.626449047106,-2.64,0.15));+#10222=LINE('',#10216,#72);+#10223=ORIENTED_EDGE('',*,*,#10224,.T.);+#10224=EDGE_CURVE('',#10220,#10225,#10227,.T.);+#10225=VERTEX_POINT('',#10226);+#10226=CARTESIAN_POINT('',(3.527968271805,-2.64,0.232635182233));+#10227=CIRCLE('',#10228,0.1);+#10228=AXIS2_PLACEMENT_3D('',#10207,#87,#7573);+#10229=ORIENTED_EDGE('',*,*,#10230,.T.);+#10230=EDGE_CURVE('',#10225,#10231,#10233,.T.);+#10231=VERTEX_POINT('',#10232);+#10232=CARTESIAN_POINT('',(3.496201938253,-2.64,0.443412044417));+#10233=LINE('',#10226,#7579);+#10234=ORIENTED_EDGE('',*,*,#10235,.T.);+#10235=EDGE_CURVE('',#10231,#10236,#10237,.T.);+#10236=VERTEX_POINT('',#10182);+#10237=CIRCLE('',#10238,0.25);+#10238=AXIS2_PLACEMENT_3D('',#10195,#59,#7585);+#10239=ORIENTED_EDGE('',*,*,#10240,.T.);+#10240=EDGE_CURVE('',#10236,#2594,#10181,.T.);+#10241=PLANE('',#10242);+#10242=AXIS2_PLACEMENT_3D('',#10243,#59,#13);+#10243=CARTESIAN_POINT('',(3.487377466565,-2.64,0.305338822795));+#10244=ADVANCED_FACE('',(#10245),#10259,.F.);+#10245=FACE_BOUND('',#10246,.F.);+#10246=EDGE_LOOP('',(#10247,#10248,#10255,#10258));+#10247=ORIENTED_EDGE('',*,*,#2617,.T.);+#10248=ORIENTED_EDGE('',*,*,#10249,.T.);+#10249=EDGE_CURVE('',#2612,#10250,#10252,.T.);+#10250=VERTEX_POINT('',#10251);+#10251=CARTESIAN_POINT('',(3.348480775301,-2.86,0.417364817767));+#10252=CIRCLE('',#10253,0.1);+#10253=AXIS2_PLACEMENT_3D('',#10254,#87,#7536);+#10254=CARTESIAN_POINT('',(3.25,-2.86,0.4));+#10255=ORIENTED_EDGE('',*,*,#10256,.F.);+#10256=EDGE_CURVE('',#10191,#10250,#10257,.T.);+#10257=LINE('',#10192,#58);+#10258=ORIENTED_EDGE('',*,*,#10190,.F.);+#10259=CYLINDRICAL_SURFACE('',#10194,0.1);+#10260=ADVANCED_FACE('',(#10261),#10310,.T.);+#10261=FACE_BOUND('',#10262,.T.);+#10262=EDGE_LOOP('',(#2624,#2610,#10248,#10263,#10268,#10275,#10280,#10285,#10290,#10296,#10301,#10307));+#10263=ORIENTED_EDGE('',*,*,#10264,.T.);+#10264=EDGE_CURVE('',#10250,#10265,#10267,.T.);+#10265=VERTEX_POINT('',#10266);+#10266=CARTESIAN_POINT('',(3.380247108853,-2.86,0.206587955583));+#10267=LINE('',#10251,#7542);+#10268=ORIENTED_EDGE('',*,*,#10269,.T.);+#10269=EDGE_CURVE('',#10265,#10270,#10272,.T.);+#10270=VERTEX_POINT('',#10271);+#10271=CARTESIAN_POINT('',(3.626449047106,-2.86,5.551115123126E-17));+#10272=CIRCLE('',#10273,0.25);+#10273=AXIS2_PLACEMENT_3D('',#10274,#59,#7551);+#10274=CARTESIAN_POINT('',(3.626449047106,-2.86,0.25));+#10275=ORIENTED_EDGE('',*,*,#10276,.T.);+#10276=EDGE_CURVE('',#10270,#10277,#10279,.T.);+#10277=VERTEX_POINT('',#10278);+#10278=CARTESIAN_POINT('',(4.05,-2.86,5.551115123126E-17));+#10279=LINE('',#10271,#27);+#10280=ORIENTED_EDGE('',*,*,#10281,.T.);+#10281=EDGE_CURVE('',#10277,#10282,#10284,.T.);+#10282=VERTEX_POINT('',#10283);+#10283=CARTESIAN_POINT('',(4.05,-2.86,0.15));+#10284=LINE('',#10278,#754);+#10285=ORIENTED_EDGE('',*,*,#10286,.T.);+#10286=EDGE_CURVE('',#10282,#10287,#10289,.T.);+#10287=VERTEX_POINT('',#10288);+#10288=CARTESIAN_POINT('',(3.626449047106,-2.86,0.15));+#10289=LINE('',#10283,#72);+#10290=ORIENTED_EDGE('',*,*,#10291,.T.);+#10291=EDGE_CURVE('',#10287,#10292,#10294,.T.);+#10292=VERTEX_POINT('',#10293);+#10293=CARTESIAN_POINT('',(3.527968271805,-2.86,0.232635182233));+#10294=CIRCLE('',#10295,0.1);+#10295=AXIS2_PLACEMENT_3D('',#10274,#87,#7573);+#10296=ORIENTED_EDGE('',*,*,#10297,.T.);+#10297=EDGE_CURVE('',#10292,#10298,#10300,.T.);+#10298=VERTEX_POINT('',#10299);+#10299=CARTESIAN_POINT('',(3.496201938253,-2.86,0.443412044417));+#10300=LINE('',#10293,#7579);+#10301=ORIENTED_EDGE('',*,*,#10302,.T.);+#10302=EDGE_CURVE('',#10298,#10303,#10305,.T.);+#10303=VERTEX_POINT('',#10304);+#10304=CARTESIAN_POINT('',(3.25,-2.86,0.65));+#10305=CIRCLE('',#10306,0.25);+#10306=AXIS2_PLACEMENT_3D('',#10254,#59,#7585);+#10307=ORIENTED_EDGE('',*,*,#10308,.T.);+#10308=EDGE_CURVE('',#10303,#2626,#10309,.T.);+#10309=LINE('',#10304,#72);+#10310=PLANE('',#10311);+#10311=AXIS2_PLACEMENT_3D('',#10312,#59,#13);+#10312=CARTESIAN_POINT('',(3.487377466565,-2.86,0.305338822795));+#10313=ADVANCED_FACE('',(#10314),#724,.F.);+#10314=FACE_BOUND('',#10315,.F.);+#10315=EDGE_LOOP('',(#10316,#10318,#10319,#10323));+#10316=ORIENTED_EDGE('',*,*,#10317,.F.);+#10317=EDGE_CURVE('',#2626,#3453,#10309,.T.);+#10318=ORIENTED_EDGE('',*,*,#2638,.T.);+#10319=ORIENTED_EDGE('',*,*,#10320,.T.);+#10320=EDGE_CURVE('',#2633,#3457,#10321,.T.);+#10321=LINE('',#10322,#72);+#10322=CARTESIAN_POINT('',(3.25,-3.14,0.65));+#10323=ORIENTED_EDGE('',*,*,#3456,.F.);+#10324=ADVANCED_FACE('',(#10325),#10381,.F.);+#10325=FACE_BOUND('',#10326,.F.);+#10326=EDGE_LOOP('',(#10327,#10328,#10329,#10336,#10341,#10348,#10353,#10358,#10363,#10369,#10374,#10379));+#10327=ORIENTED_EDGE('',*,*,#2632,.F.);+#10328=ORIENTED_EDGE('',*,*,#2643,.T.);+#10329=ORIENTED_EDGE('',*,*,#10330,.T.);+#10330=EDGE_CURVE('',#2644,#10331,#10333,.T.);+#10331=VERTEX_POINT('',#10332);+#10332=CARTESIAN_POINT('',(3.348480775301,-3.14,0.417364817767));+#10333=CIRCLE('',#10334,0.1);+#10334=AXIS2_PLACEMENT_3D('',#10335,#87,#7536);+#10335=CARTESIAN_POINT('',(3.25,-3.14,0.4));+#10336=ORIENTED_EDGE('',*,*,#10337,.T.);+#10337=EDGE_CURVE('',#10331,#10338,#10340,.T.);+#10338=VERTEX_POINT('',#10339);+#10339=CARTESIAN_POINT('',(3.380247108853,-3.14,0.206587955583));+#10340=LINE('',#10332,#7542);+#10341=ORIENTED_EDGE('',*,*,#10342,.T.);+#10342=EDGE_CURVE('',#10338,#10343,#10345,.T.);+#10343=VERTEX_POINT('',#10344);+#10344=CARTESIAN_POINT('',(3.626449047106,-3.14,5.551115123126E-17));+#10345=CIRCLE('',#10346,0.25);+#10346=AXIS2_PLACEMENT_3D('',#10347,#59,#7551);+#10347=CARTESIAN_POINT('',(3.626449047106,-3.14,0.25));+#10348=ORIENTED_EDGE('',*,*,#10349,.T.);+#10349=EDGE_CURVE('',#10343,#10350,#10352,.T.);+#10350=VERTEX_POINT('',#10351);+#10351=CARTESIAN_POINT('',(4.05,-3.14,5.551115123126E-17));+#10352=LINE('',#10344,#27);+#10353=ORIENTED_EDGE('',*,*,#10354,.T.);+#10354=EDGE_CURVE('',#10350,#10355,#10357,.T.);+#10355=VERTEX_POINT('',#10356);+#10356=CARTESIAN_POINT('',(4.05,-3.14,0.15));+#10357=LINE('',#10351,#754);+#10358=ORIENTED_EDGE('',*,*,#10359,.T.);+#10359=EDGE_CURVE('',#10355,#10360,#10362,.T.);+#10360=VERTEX_POINT('',#10361);+#10361=CARTESIAN_POINT('',(3.626449047106,-3.14,0.15));+#10362=LINE('',#10356,#72);+#10363=ORIENTED_EDGE('',*,*,#10364,.T.);+#10364=EDGE_CURVE('',#10360,#10365,#10367,.T.);+#10365=VERTEX_POINT('',#10366);+#10366=CARTESIAN_POINT('',(3.527968271805,-3.14,0.232635182233));+#10367=CIRCLE('',#10368,0.1);+#10368=AXIS2_PLACEMENT_3D('',#10347,#87,#7573);+#10369=ORIENTED_EDGE('',*,*,#10370,.T.);+#10370=EDGE_CURVE('',#10365,#10371,#10373,.T.);+#10371=VERTEX_POINT('',#10372);+#10372=CARTESIAN_POINT('',(3.496201938253,-3.14,0.443412044417));+#10373=LINE('',#10366,#7579);+#10374=ORIENTED_EDGE('',*,*,#10375,.T.);+#10375=EDGE_CURVE('',#10371,#10376,#10377,.T.);+#10376=VERTEX_POINT('',#10322);+#10377=CIRCLE('',#10378,0.25);+#10378=AXIS2_PLACEMENT_3D('',#10335,#59,#7585);+#10379=ORIENTED_EDGE('',*,*,#10380,.T.);+#10380=EDGE_CURVE('',#10376,#2633,#10321,.T.);+#10381=PLANE('',#10382);+#10382=AXIS2_PLACEMENT_3D('',#10383,#59,#13);+#10383=CARTESIAN_POINT('',(3.487377466565,-3.14,0.305338822795));+#10384=ADVANCED_FACE('',(#10385),#10399,.F.);+#10385=FACE_BOUND('',#10386,.F.);+#10386=EDGE_LOOP('',(#10387,#10388,#10395,#10398));+#10387=ORIENTED_EDGE('',*,*,#2656,.T.);+#10388=ORIENTED_EDGE('',*,*,#10389,.T.);+#10389=EDGE_CURVE('',#2651,#10390,#10392,.T.);+#10390=VERTEX_POINT('',#10391);+#10391=CARTESIAN_POINT('',(3.348480775301,-3.36,0.417364817767));+#10392=CIRCLE('',#10393,0.1);+#10393=AXIS2_PLACEMENT_3D('',#10394,#87,#7536);+#10394=CARTESIAN_POINT('',(3.25,-3.36,0.4));+#10395=ORIENTED_EDGE('',*,*,#10396,.F.);+#10396=EDGE_CURVE('',#10331,#10390,#10397,.T.);+#10397=LINE('',#10332,#58);+#10398=ORIENTED_EDGE('',*,*,#10330,.F.);+#10399=CYLINDRICAL_SURFACE('',#10334,0.1);+#10400=ADVANCED_FACE('',(#10401),#10450,.T.);+#10401=FACE_BOUND('',#10402,.T.);+#10402=EDGE_LOOP('',(#2663,#2649,#10388,#10403,#10408,#10415,#10420,#10425,#10430,#10436,#10441,#10447));+#10403=ORIENTED_EDGE('',*,*,#10404,.T.);+#10404=EDGE_CURVE('',#10390,#10405,#10407,.T.);+#10405=VERTEX_POINT('',#10406);+#10406=CARTESIAN_POINT('',(3.380247108853,-3.36,0.206587955583));+#10407=LINE('',#10391,#7542);+#10408=ORIENTED_EDGE('',*,*,#10409,.T.);+#10409=EDGE_CURVE('',#10405,#10410,#10412,.T.);+#10410=VERTEX_POINT('',#10411);+#10411=CARTESIAN_POINT('',(3.626449047106,-3.36,5.551115123126E-17));+#10412=CIRCLE('',#10413,0.25);+#10413=AXIS2_PLACEMENT_3D('',#10414,#59,#7551);+#10414=CARTESIAN_POINT('',(3.626449047106,-3.36,0.25));+#10415=ORIENTED_EDGE('',*,*,#10416,.T.);+#10416=EDGE_CURVE('',#10410,#10417,#10419,.T.);+#10417=VERTEX_POINT('',#10418);+#10418=CARTESIAN_POINT('',(4.05,-3.36,5.551115123126E-17));+#10419=LINE('',#10411,#27);+#10420=ORIENTED_EDGE('',*,*,#10421,.T.);+#10421=EDGE_CURVE('',#10417,#10422,#10424,.T.);+#10422=VERTEX_POINT('',#10423);+#10423=CARTESIAN_POINT('',(4.05,-3.36,0.15));+#10424=LINE('',#10418,#754);+#10425=ORIENTED_EDGE('',*,*,#10426,.T.);+#10426=EDGE_CURVE('',#10422,#10427,#10429,.T.);+#10427=VERTEX_POINT('',#10428);+#10428=CARTESIAN_POINT('',(3.626449047106,-3.36,0.15));+#10429=LINE('',#10423,#72);+#10430=ORIENTED_EDGE('',*,*,#10431,.T.);+#10431=EDGE_CURVE('',#10427,#10432,#10434,.T.);+#10432=VERTEX_POINT('',#10433);+#10433=CARTESIAN_POINT('',(3.527968271805,-3.36,0.232635182233));+#10434=CIRCLE('',#10435,0.1);+#10435=AXIS2_PLACEMENT_3D('',#10414,#87,#7573);+#10436=ORIENTED_EDGE('',*,*,#10437,.T.);+#10437=EDGE_CURVE('',#10432,#10438,#10440,.T.);+#10438=VERTEX_POINT('',#10439);+#10439=CARTESIAN_POINT('',(3.496201938253,-3.36,0.443412044417));+#10440=LINE('',#10433,#7579);+#10441=ORIENTED_EDGE('',*,*,#10442,.T.);+#10442=EDGE_CURVE('',#10438,#10443,#10445,.T.);+#10443=VERTEX_POINT('',#10444);+#10444=CARTESIAN_POINT('',(3.25,-3.36,0.65));+#10445=CIRCLE('',#10446,0.25);+#10446=AXIS2_PLACEMENT_3D('',#10394,#59,#7585);+#10447=ORIENTED_EDGE('',*,*,#10448,.T.);+#10448=EDGE_CURVE('',#10443,#2665,#10449,.T.);+#10449=LINE('',#10444,#72);+#10450=PLANE('',#10451);+#10451=AXIS2_PLACEMENT_3D('',#10452,#59,#13);+#10452=CARTESIAN_POINT('',(3.487377466565,-3.36,0.305338822795));+#10453=ADVANCED_FACE('',(#10454),#724,.F.);+#10454=FACE_BOUND('',#10455,.F.);+#10455=EDGE_LOOP('',(#10456,#10458,#10459,#10463));+#10456=ORIENTED_EDGE('',*,*,#10457,.F.);+#10457=EDGE_CURVE('',#2665,#3461,#10449,.T.);+#10458=ORIENTED_EDGE('',*,*,#2677,.T.);+#10459=ORIENTED_EDGE('',*,*,#10460,.T.);+#10460=EDGE_CURVE('',#2672,#3465,#10461,.T.);+#10461=LINE('',#10462,#72);+#10462=CARTESIAN_POINT('',(3.25,-3.64,0.65));+#10463=ORIENTED_EDGE('',*,*,#3464,.F.);+#10464=ADVANCED_FACE('',(#10465),#10521,.F.);+#10465=FACE_BOUND('',#10466,.F.);+#10466=EDGE_LOOP('',(#10467,#10468,#10469,#10476,#10481,#10488,#10493,#10498,#10503,#10509,#10514,#10519));+#10467=ORIENTED_EDGE('',*,*,#2671,.F.);+#10468=ORIENTED_EDGE('',*,*,#2682,.T.);+#10469=ORIENTED_EDGE('',*,*,#10470,.T.);+#10470=EDGE_CURVE('',#2683,#10471,#10473,.T.);+#10471=VERTEX_POINT('',#10472);+#10472=CARTESIAN_POINT('',(3.348480775301,-3.64,0.417364817767));+#10473=CIRCLE('',#10474,0.1);+#10474=AXIS2_PLACEMENT_3D('',#10475,#87,#7536);+#10475=CARTESIAN_POINT('',(3.25,-3.64,0.4));+#10476=ORIENTED_EDGE('',*,*,#10477,.T.);+#10477=EDGE_CURVE('',#10471,#10478,#10480,.T.);+#10478=VERTEX_POINT('',#10479);+#10479=CARTESIAN_POINT('',(3.380247108853,-3.64,0.206587955583));+#10480=LINE('',#10472,#7542);+#10481=ORIENTED_EDGE('',*,*,#10482,.T.);+#10482=EDGE_CURVE('',#10478,#10483,#10485,.T.);+#10483=VERTEX_POINT('',#10484);+#10484=CARTESIAN_POINT('',(3.626449047106,-3.64,5.551115123126E-17));+#10485=CIRCLE('',#10486,0.25);+#10486=AXIS2_PLACEMENT_3D('',#10487,#59,#7551);+#10487=CARTESIAN_POINT('',(3.626449047106,-3.64,0.25));+#10488=ORIENTED_EDGE('',*,*,#10489,.T.);+#10489=EDGE_CURVE('',#10483,#10490,#10492,.T.);+#10490=VERTEX_POINT('',#10491);+#10491=CARTESIAN_POINT('',(4.05,-3.64,5.551115123126E-17));+#10492=LINE('',#10484,#27);+#10493=ORIENTED_EDGE('',*,*,#10494,.T.);+#10494=EDGE_CURVE('',#10490,#10495,#10497,.T.);+#10495=VERTEX_POINT('',#10496);+#10496=CARTESIAN_POINT('',(4.05,-3.64,0.15));+#10497=LINE('',#10491,#754);+#10498=ORIENTED_EDGE('',*,*,#10499,.T.);+#10499=EDGE_CURVE('',#10495,#10500,#10502,.T.);+#10500=VERTEX_POINT('',#10501);+#10501=CARTESIAN_POINT('',(3.626449047106,-3.64,0.15));+#10502=LINE('',#10496,#72);+#10503=ORIENTED_EDGE('',*,*,#10504,.T.);+#10504=EDGE_CURVE('',#10500,#10505,#10507,.T.);+#10505=VERTEX_POINT('',#10506);+#10506=CARTESIAN_POINT('',(3.527968271805,-3.64,0.232635182233));+#10507=CIRCLE('',#10508,0.1);+#10508=AXIS2_PLACEMENT_3D('',#10487,#87,#7573);+#10509=ORIENTED_EDGE('',*,*,#10510,.T.);+#10510=EDGE_CURVE('',#10505,#10511,#10513,.T.);+#10511=VERTEX_POINT('',#10512);+#10512=CARTESIAN_POINT('',(3.496201938253,-3.64,0.443412044417));+#10513=LINE('',#10506,#7579);+#10514=ORIENTED_EDGE('',*,*,#10515,.T.);+#10515=EDGE_CURVE('',#10511,#10516,#10517,.T.);+#10516=VERTEX_POINT('',#10462);+#10517=CIRCLE('',#10518,0.25);+#10518=AXIS2_PLACEMENT_3D('',#10475,#59,#7585);+#10519=ORIENTED_EDGE('',*,*,#10520,.T.);+#10520=EDGE_CURVE('',#10516,#2672,#10461,.T.);+#10521=PLANE('',#10522);+#10522=AXIS2_PLACEMENT_3D('',#10523,#59,#13);+#10523=CARTESIAN_POINT('',(3.487377466565,-3.64,0.305338822795));+#10524=ADVANCED_FACE('',(#10525),#10539,.F.);+#10525=FACE_BOUND('',#10526,.F.);+#10526=EDGE_LOOP('',(#10527,#10528,#10535,#10538));+#10527=ORIENTED_EDGE('',*,*,#2695,.T.);+#10528=ORIENTED_EDGE('',*,*,#10529,.T.);+#10529=EDGE_CURVE('',#2690,#10530,#10532,.T.);+#10530=VERTEX_POINT('',#10531);+#10531=CARTESIAN_POINT('',(3.348480775301,-3.86,0.417364817767));+#10532=CIRCLE('',#10533,0.1);+#10533=AXIS2_PLACEMENT_3D('',#10534,#87,#7536);+#10534=CARTESIAN_POINT('',(3.25,-3.86,0.4));+#10535=ORIENTED_EDGE('',*,*,#10536,.F.);+#10536=EDGE_CURVE('',#10471,#10530,#10537,.T.);+#10537=LINE('',#10472,#58);+#10538=ORIENTED_EDGE('',*,*,#10470,.F.);+#10539=CYLINDRICAL_SURFACE('',#10474,0.1);+#10540=ADVANCED_FACE('',(#10541),#10590,.T.);+#10541=FACE_BOUND('',#10542,.T.);+#10542=EDGE_LOOP('',(#2702,#2688,#10528,#10543,#10548,#10555,#10560,#10565,#10570,#10576,#10581,#10587));+#10543=ORIENTED_EDGE('',*,*,#10544,.T.);+#10544=EDGE_CURVE('',#10530,#10545,#10547,.T.);+#10545=VERTEX_POINT('',#10546);+#10546=CARTESIAN_POINT('',(3.380247108853,-3.86,0.206587955583));+#10547=LINE('',#10531,#7542);+#10548=ORIENTED_EDGE('',*,*,#10549,.T.);+#10549=EDGE_CURVE('',#10545,#10550,#10552,.T.);+#10550=VERTEX_POINT('',#10551);+#10551=CARTESIAN_POINT('',(3.626449047106,-3.86,5.551115123126E-17));+#10552=CIRCLE('',#10553,0.25);+#10553=AXIS2_PLACEMENT_3D('',#10554,#59,#7551);+#10554=CARTESIAN_POINT('',(3.626449047106,-3.86,0.25));+#10555=ORIENTED_EDGE('',*,*,#10556,.T.);+#10556=EDGE_CURVE('',#10550,#10557,#10559,.T.);+#10557=VERTEX_POINT('',#10558);+#10558=CARTESIAN_POINT('',(4.05,-3.86,5.551115123126E-17));+#10559=LINE('',#10551,#27);+#10560=ORIENTED_EDGE('',*,*,#10561,.T.);+#10561=EDGE_CURVE('',#10557,#10562,#10564,.T.);+#10562=VERTEX_POINT('',#10563);+#10563=CARTESIAN_POINT('',(4.05,-3.86,0.15));+#10564=LINE('',#10558,#754);+#10565=ORIENTED_EDGE('',*,*,#10566,.T.);+#10566=EDGE_CURVE('',#10562,#10567,#10569,.T.);+#10567=VERTEX_POINT('',#10568);+#10568=CARTESIAN_POINT('',(3.626449047106,-3.86,0.15));+#10569=LINE('',#10563,#72);+#10570=ORIENTED_EDGE('',*,*,#10571,.T.);+#10571=EDGE_CURVE('',#10567,#10572,#10574,.T.);+#10572=VERTEX_POINT('',#10573);+#10573=CARTESIAN_POINT('',(3.527968271805,-3.86,0.232635182233));+#10574=CIRCLE('',#10575,0.1);+#10575=AXIS2_PLACEMENT_3D('',#10554,#87,#7573);+#10576=ORIENTED_EDGE('',*,*,#10577,.T.);+#10577=EDGE_CURVE('',#10572,#10578,#10580,.T.);+#10578=VERTEX_POINT('',#10579);+#10579=CARTESIAN_POINT('',(3.496201938253,-3.86,0.443412044417));+#10580=LINE('',#10573,#7579);+#10581=ORIENTED_EDGE('',*,*,#10582,.T.);+#10582=EDGE_CURVE('',#10578,#10583,#10585,.T.);+#10583=VERTEX_POINT('',#10584);+#10584=CARTESIAN_POINT('',(3.25,-3.86,0.65));+#10585=CIRCLE('',#10586,0.25);+#10586=AXIS2_PLACEMENT_3D('',#10534,#59,#7585);+#10587=ORIENTED_EDGE('',*,*,#10588,.T.);+#10588=EDGE_CURVE('',#10583,#2704,#10589,.T.);+#10589=LINE('',#10584,#72);+#10590=PLANE('',#10591);+#10591=AXIS2_PLACEMENT_3D('',#10592,#59,#13);+#10592=CARTESIAN_POINT('',(3.487377466565,-3.86,0.305338822795));+#10593=ADVANCED_FACE('',(#10594),#724,.F.);+#10594=FACE_BOUND('',#10595,.F.);+#10595=EDGE_LOOP('',(#10596,#10598,#10599,#10603));+#10596=ORIENTED_EDGE('',*,*,#10597,.F.);+#10597=EDGE_CURVE('',#2704,#3469,#10589,.T.);+#10598=ORIENTED_EDGE('',*,*,#2716,.T.);+#10599=ORIENTED_EDGE('',*,*,#10600,.T.);+#10600=EDGE_CURVE('',#2711,#3473,#10601,.T.);+#10601=LINE('',#10602,#72);+#10602=CARTESIAN_POINT('',(3.25,-4.14,0.65));+#10603=ORIENTED_EDGE('',*,*,#3472,.F.);+#10604=ADVANCED_FACE('',(#10605),#10661,.F.);+#10605=FACE_BOUND('',#10606,.F.);+#10606=EDGE_LOOP('',(#10607,#10608,#10609,#10616,#10621,#10628,#10633,#10638,#10643,#10649,#10654,#10659));+#10607=ORIENTED_EDGE('',*,*,#2710,.F.);+#10608=ORIENTED_EDGE('',*,*,#2721,.T.);+#10609=ORIENTED_EDGE('',*,*,#10610,.T.);+#10610=EDGE_CURVE('',#2722,#10611,#10613,.T.);+#10611=VERTEX_POINT('',#10612);+#10612=CARTESIAN_POINT('',(3.348480775301,-4.14,0.417364817767));+#10613=CIRCLE('',#10614,0.1);+#10614=AXIS2_PLACEMENT_3D('',#10615,#87,#7536);+#10615=CARTESIAN_POINT('',(3.25,-4.14,0.4));+#10616=ORIENTED_EDGE('',*,*,#10617,.T.);+#10617=EDGE_CURVE('',#10611,#10618,#10620,.T.);+#10618=VERTEX_POINT('',#10619);+#10619=CARTESIAN_POINT('',(3.380247108853,-4.14,0.206587955583));+#10620=LINE('',#10612,#7542);+#10621=ORIENTED_EDGE('',*,*,#10622,.T.);+#10622=EDGE_CURVE('',#10618,#10623,#10625,.T.);+#10623=VERTEX_POINT('',#10624);+#10624=CARTESIAN_POINT('',(3.626449047106,-4.14,5.551115123126E-17));+#10625=CIRCLE('',#10626,0.25);+#10626=AXIS2_PLACEMENT_3D('',#10627,#59,#7551);+#10627=CARTESIAN_POINT('',(3.626449047106,-4.14,0.25));+#10628=ORIENTED_EDGE('',*,*,#10629,.T.);+#10629=EDGE_CURVE('',#10623,#10630,#10632,.T.);+#10630=VERTEX_POINT('',#10631);+#10631=CARTESIAN_POINT('',(4.05,-4.14,5.551115123126E-17));+#10632=LINE('',#10624,#27);+#10633=ORIENTED_EDGE('',*,*,#10634,.T.);+#10634=EDGE_CURVE('',#10630,#10635,#10637,.T.);+#10635=VERTEX_POINT('',#10636);+#10636=CARTESIAN_POINT('',(4.05,-4.14,0.15));+#10637=LINE('',#10631,#754);+#10638=ORIENTED_EDGE('',*,*,#10639,.T.);+#10639=EDGE_CURVE('',#10635,#10640,#10642,.T.);+#10640=VERTEX_POINT('',#10641);+#10641=CARTESIAN_POINT('',(3.626449047106,-4.14,0.15));+#10642=LINE('',#10636,#72);+#10643=ORIENTED_EDGE('',*,*,#10644,.T.);+#10644=EDGE_CURVE('',#10640,#10645,#10647,.T.);+#10645=VERTEX_POINT('',#10646);+#10646=CARTESIAN_POINT('',(3.527968271805,-4.14,0.232635182233));+#10647=CIRCLE('',#10648,0.1);+#10648=AXIS2_PLACEMENT_3D('',#10627,#87,#7573);+#10649=ORIENTED_EDGE('',*,*,#10650,.T.);+#10650=EDGE_CURVE('',#10645,#10651,#10653,.T.);+#10651=VERTEX_POINT('',#10652);+#10652=CARTESIAN_POINT('',(3.496201938253,-4.14,0.443412044417));+#10653=LINE('',#10646,#7579);+#10654=ORIENTED_EDGE('',*,*,#10655,.T.);+#10655=EDGE_CURVE('',#10651,#10656,#10657,.T.);+#10656=VERTEX_POINT('',#10602);+#10657=CIRCLE('',#10658,0.25);+#10658=AXIS2_PLACEMENT_3D('',#10615,#59,#7585);+#10659=ORIENTED_EDGE('',*,*,#10660,.T.);+#10660=EDGE_CURVE('',#10656,#2711,#10601,.T.);+#10661=PLANE('',#10662);+#10662=AXIS2_PLACEMENT_3D('',#10663,#59,#13);+#10663=CARTESIAN_POINT('',(3.487377466565,-4.14,0.305338822795));+#10664=ADVANCED_FACE('',(#10665),#10679,.F.);+#10665=FACE_BOUND('',#10666,.F.);+#10666=EDGE_LOOP('',(#10667,#10668,#10675,#10678));+#10667=ORIENTED_EDGE('',*,*,#2734,.T.);+#10668=ORIENTED_EDGE('',*,*,#10669,.T.);+#10669=EDGE_CURVE('',#2729,#10670,#10672,.T.);+#10670=VERTEX_POINT('',#10671);+#10671=CARTESIAN_POINT('',(3.348480775301,-4.36,0.417364817767));+#10672=CIRCLE('',#10673,0.1);+#10673=AXIS2_PLACEMENT_3D('',#10674,#87,#7536);+#10674=CARTESIAN_POINT('',(3.25,-4.36,0.4));+#10675=ORIENTED_EDGE('',*,*,#10676,.F.);+#10676=EDGE_CURVE('',#10611,#10670,#10677,.T.);+#10677=LINE('',#10612,#58);+#10678=ORIENTED_EDGE('',*,*,#10610,.F.);+#10679=CYLINDRICAL_SURFACE('',#10614,0.1);+#10680=ADVANCED_FACE('',(#10681),#10730,.T.);+#10681=FACE_BOUND('',#10682,.T.);+#10682=EDGE_LOOP('',(#2741,#2727,#10668,#10683,#10688,#10695,#10700,#10705,#10710,#10716,#10721,#10727));+#10683=ORIENTED_EDGE('',*,*,#10684,.T.);+#10684=EDGE_CURVE('',#10670,#10685,#10687,.T.);+#10685=VERTEX_POINT('',#10686);+#10686=CARTESIAN_POINT('',(3.380247108853,-4.36,0.206587955583));+#10687=LINE('',#10671,#7542);+#10688=ORIENTED_EDGE('',*,*,#10689,.T.);+#10689=EDGE_CURVE('',#10685,#10690,#10692,.T.);+#10690=VERTEX_POINT('',#10691);+#10691=CARTESIAN_POINT('',(3.626449047106,-4.36,5.551115123126E-17));+#10692=CIRCLE('',#10693,0.25);+#10693=AXIS2_PLACEMENT_3D('',#10694,#59,#7551);+#10694=CARTESIAN_POINT('',(3.626449047106,-4.36,0.25));+#10695=ORIENTED_EDGE('',*,*,#10696,.T.);+#10696=EDGE_CURVE('',#10690,#10697,#10699,.T.);+#10697=VERTEX_POINT('',#10698);+#10698=CARTESIAN_POINT('',(4.05,-4.36,5.551115123126E-17));+#10699=LINE('',#10691,#27);+#10700=ORIENTED_EDGE('',*,*,#10701,.T.);+#10701=EDGE_CURVE('',#10697,#10702,#10704,.T.);+#10702=VERTEX_POINT('',#10703);+#10703=CARTESIAN_POINT('',(4.05,-4.36,0.15));+#10704=LINE('',#10698,#754);+#10705=ORIENTED_EDGE('',*,*,#10706,.T.);+#10706=EDGE_CURVE('',#10702,#10707,#10709,.T.);+#10707=VERTEX_POINT('',#10708);+#10708=CARTESIAN_POINT('',(3.626449047106,-4.36,0.15));+#10709=LINE('',#10703,#72);+#10710=ORIENTED_EDGE('',*,*,#10711,.T.);+#10711=EDGE_CURVE('',#10707,#10712,#10714,.T.);+#10712=VERTEX_POINT('',#10713);+#10713=CARTESIAN_POINT('',(3.527968271805,-4.36,0.232635182233));+#10714=CIRCLE('',#10715,0.1);+#10715=AXIS2_PLACEMENT_3D('',#10694,#87,#7573);+#10716=ORIENTED_EDGE('',*,*,#10717,.T.);+#10717=EDGE_CURVE('',#10712,#10718,#10720,.T.);+#10718=VERTEX_POINT('',#10719);+#10719=CARTESIAN_POINT('',(3.496201938253,-4.36,0.443412044417));+#10720=LINE('',#10713,#7579);+#10721=ORIENTED_EDGE('',*,*,#10722,.T.);+#10722=EDGE_CURVE('',#10718,#10723,#10725,.T.);+#10723=VERTEX_POINT('',#10724);+#10724=CARTESIAN_POINT('',(3.25,-4.36,0.65));+#10725=CIRCLE('',#10726,0.25);+#10726=AXIS2_PLACEMENT_3D('',#10674,#59,#7585);+#10727=ORIENTED_EDGE('',*,*,#10728,.T.);+#10728=EDGE_CURVE('',#10723,#2743,#10729,.T.);+#10729=LINE('',#10724,#72);+#10730=PLANE('',#10731);+#10731=AXIS2_PLACEMENT_3D('',#10732,#59,#13);+#10732=CARTESIAN_POINT('',(3.487377466565,-4.36,0.305338822795));+#10733=ADVANCED_FACE('',(#10734),#724,.F.);+#10734=FACE_BOUND('',#10735,.F.);+#10735=EDGE_LOOP('',(#10736,#10738,#10739,#10743));+#10736=ORIENTED_EDGE('',*,*,#10737,.F.);+#10737=EDGE_CURVE('',#2743,#3477,#10729,.T.);+#10738=ORIENTED_EDGE('',*,*,#2755,.T.);+#10739=ORIENTED_EDGE('',*,*,#10740,.T.);+#10740=EDGE_CURVE('',#2750,#3481,#10741,.T.);+#10741=LINE('',#10742,#72);+#10742=CARTESIAN_POINT('',(3.25,-4.64,0.65));+#10743=ORIENTED_EDGE('',*,*,#3480,.F.);+#10744=ADVANCED_FACE('',(#10745),#10801,.F.);+#10745=FACE_BOUND('',#10746,.F.);+#10746=EDGE_LOOP('',(#10747,#10748,#10749,#10756,#10761,#10768,#10773,#10778,#10783,#10789,#10794,#10799));+#10747=ORIENTED_EDGE('',*,*,#2749,.F.);+#10748=ORIENTED_EDGE('',*,*,#2760,.T.);+#10749=ORIENTED_EDGE('',*,*,#10750,.T.);+#10750=EDGE_CURVE('',#2761,#10751,#10753,.T.);+#10751=VERTEX_POINT('',#10752);+#10752=CARTESIAN_POINT('',(3.348480775301,-4.64,0.417364817767));+#10753=CIRCLE('',#10754,0.1);+#10754=AXIS2_PLACEMENT_3D('',#10755,#87,#7536);+#10755=CARTESIAN_POINT('',(3.25,-4.64,0.4));+#10756=ORIENTED_EDGE('',*,*,#10757,.T.);+#10757=EDGE_CURVE('',#10751,#10758,#10760,.T.);+#10758=VERTEX_POINT('',#10759);+#10759=CARTESIAN_POINT('',(3.380247108853,-4.64,0.206587955583));+#10760=LINE('',#10752,#7542);+#10761=ORIENTED_EDGE('',*,*,#10762,.T.);+#10762=EDGE_CURVE('',#10758,#10763,#10765,.T.);+#10763=VERTEX_POINT('',#10764);+#10764=CARTESIAN_POINT('',(3.626449047106,-4.64,5.551115123126E-17));+#10765=CIRCLE('',#10766,0.25);+#10766=AXIS2_PLACEMENT_3D('',#10767,#59,#7551);+#10767=CARTESIAN_POINT('',(3.626449047106,-4.64,0.25));+#10768=ORIENTED_EDGE('',*,*,#10769,.T.);+#10769=EDGE_CURVE('',#10763,#10770,#10772,.T.);+#10770=VERTEX_POINT('',#10771);+#10771=CARTESIAN_POINT('',(4.05,-4.64,5.551115123126E-17));+#10772=LINE('',#10764,#27);+#10773=ORIENTED_EDGE('',*,*,#10774,.T.);+#10774=EDGE_CURVE('',#10770,#10775,#10777,.T.);+#10775=VERTEX_POINT('',#10776);+#10776=CARTESIAN_POINT('',(4.05,-4.64,0.15));+#10777=LINE('',#10771,#754);+#10778=ORIENTED_EDGE('',*,*,#10779,.T.);+#10779=EDGE_CURVE('',#10775,#10780,#10782,.T.);+#10780=VERTEX_POINT('',#10781);+#10781=CARTESIAN_POINT('',(3.626449047106,-4.64,0.15));+#10782=LINE('',#10776,#72);+#10783=ORIENTED_EDGE('',*,*,#10784,.T.);+#10784=EDGE_CURVE('',#10780,#10785,#10787,.T.);+#10785=VERTEX_POINT('',#10786);+#10786=CARTESIAN_POINT('',(3.527968271805,-4.64,0.232635182233));+#10787=CIRCLE('',#10788,0.1);+#10788=AXIS2_PLACEMENT_3D('',#10767,#87,#7573);+#10789=ORIENTED_EDGE('',*,*,#10790,.T.);+#10790=EDGE_CURVE('',#10785,#10791,#10793,.T.);+#10791=VERTEX_POINT('',#10792);+#10792=CARTESIAN_POINT('',(3.496201938253,-4.64,0.443412044417));+#10793=LINE('',#10786,#7579);+#10794=ORIENTED_EDGE('',*,*,#10795,.T.);+#10795=EDGE_CURVE('',#10791,#10796,#10797,.T.);+#10796=VERTEX_POINT('',#10742);+#10797=CIRCLE('',#10798,0.25);+#10798=AXIS2_PLACEMENT_3D('',#10755,#59,#7585);+#10799=ORIENTED_EDGE('',*,*,#10800,.T.);+#10800=EDGE_CURVE('',#10796,#2750,#10741,.T.);+#10801=PLANE('',#10802);+#10802=AXIS2_PLACEMENT_3D('',#10803,#59,#13);+#10803=CARTESIAN_POINT('',(3.487377466565,-4.64,0.305338822795));+#10804=ADVANCED_FACE('',(#10805),#10819,.F.);+#10805=FACE_BOUND('',#10806,.F.);+#10806=EDGE_LOOP('',(#10807,#10808,#10815,#10818));+#10807=ORIENTED_EDGE('',*,*,#2773,.T.);+#10808=ORIENTED_EDGE('',*,*,#10809,.T.);+#10809=EDGE_CURVE('',#2768,#10810,#10812,.T.);+#10810=VERTEX_POINT('',#10811);+#10811=CARTESIAN_POINT('',(3.348480775301,-4.86,0.417364817767));+#10812=CIRCLE('',#10813,0.1);+#10813=AXIS2_PLACEMENT_3D('',#10814,#87,#7536);+#10814=CARTESIAN_POINT('',(3.25,-4.86,0.4));+#10815=ORIENTED_EDGE('',*,*,#10816,.F.);+#10816=EDGE_CURVE('',#10751,#10810,#10817,.T.);+#10817=LINE('',#10752,#58);+#10818=ORIENTED_EDGE('',*,*,#10750,.F.);+#10819=CYLINDRICAL_SURFACE('',#10754,0.1);+#10820=ADVANCED_FACE('',(#10821),#10870,.T.);+#10821=FACE_BOUND('',#10822,.T.);+#10822=EDGE_LOOP('',(#2780,#2766,#10808,#10823,#10828,#10835,#10840,#10845,#10850,#10856,#10861,#10867));+#10823=ORIENTED_EDGE('',*,*,#10824,.T.);+#10824=EDGE_CURVE('',#10810,#10825,#10827,.T.);+#10825=VERTEX_POINT('',#10826);+#10826=CARTESIAN_POINT('',(3.380247108853,-4.86,0.206587955583));+#10827=LINE('',#10811,#7542);+#10828=ORIENTED_EDGE('',*,*,#10829,.T.);+#10829=EDGE_CURVE('',#10825,#10830,#10832,.T.);+#10830=VERTEX_POINT('',#10831);+#10831=CARTESIAN_POINT('',(3.626449047106,-4.86,5.551115123126E-17));+#10832=CIRCLE('',#10833,0.25);+#10833=AXIS2_PLACEMENT_3D('',#10834,#59,#7551);+#10834=CARTESIAN_POINT('',(3.626449047106,-4.86,0.25));+#10835=ORIENTED_EDGE('',*,*,#10836,.T.);+#10836=EDGE_CURVE('',#10830,#10837,#10839,.T.);+#10837=VERTEX_POINT('',#10838);+#10838=CARTESIAN_POINT('',(4.05,-4.86,5.551115123126E-17));+#10839=LINE('',#10831,#27);+#10840=ORIENTED_EDGE('',*,*,#10841,.T.);+#10841=EDGE_CURVE('',#10837,#10842,#10844,.T.);+#10842=VERTEX_POINT('',#10843);+#10843=CARTESIAN_POINT('',(4.05,-4.86,0.15));+#10844=LINE('',#10838,#754);+#10845=ORIENTED_EDGE('',*,*,#10846,.T.);+#10846=EDGE_CURVE('',#10842,#10847,#10849,.T.);+#10847=VERTEX_POINT('',#10848);+#10848=CARTESIAN_POINT('',(3.626449047106,-4.86,0.15));+#10849=LINE('',#10843,#72);+#10850=ORIENTED_EDGE('',*,*,#10851,.T.);+#10851=EDGE_CURVE('',#10847,#10852,#10854,.T.);+#10852=VERTEX_POINT('',#10853);+#10853=CARTESIAN_POINT('',(3.527968271805,-4.86,0.232635182233));+#10854=CIRCLE('',#10855,0.1);+#10855=AXIS2_PLACEMENT_3D('',#10834,#87,#7573);+#10856=ORIENTED_EDGE('',*,*,#10857,.T.);+#10857=EDGE_CURVE('',#10852,#10858,#10860,.T.);+#10858=VERTEX_POINT('',#10859);+#10859=CARTESIAN_POINT('',(3.496201938253,-4.86,0.443412044417));+#10860=LINE('',#10853,#7579);+#10861=ORIENTED_EDGE('',*,*,#10862,.T.);+#10862=EDGE_CURVE('',#10858,#10863,#10865,.T.);+#10863=VERTEX_POINT('',#10864);+#10864=CARTESIAN_POINT('',(3.25,-4.86,0.65));+#10865=CIRCLE('',#10866,0.25);+#10866=AXIS2_PLACEMENT_3D('',#10814,#59,#7585);+#10867=ORIENTED_EDGE('',*,*,#10868,.T.);+#10868=EDGE_CURVE('',#10863,#2782,#10869,.T.);+#10869=LINE('',#10864,#72);+#10870=PLANE('',#10871);+#10871=AXIS2_PLACEMENT_3D('',#10872,#59,#13);+#10872=CARTESIAN_POINT('',(3.487377466565,-4.86,0.305338822795));+#10873=ADVANCED_FACE('',(#10874),#724,.F.);+#10874=FACE_BOUND('',#10875,.F.);+#10875=EDGE_LOOP('',(#10876,#10878,#10879,#10883));+#10876=ORIENTED_EDGE('',*,*,#10877,.F.);+#10877=EDGE_CURVE('',#2782,#3485,#10869,.T.);+#10878=ORIENTED_EDGE('',*,*,#2794,.T.);+#10879=ORIENTED_EDGE('',*,*,#10880,.T.);+#10880=EDGE_CURVE('',#2789,#3489,#10881,.T.);+#10881=LINE('',#10882,#72);+#10882=CARTESIAN_POINT('',(3.25,-5.14,0.65));+#10883=ORIENTED_EDGE('',*,*,#3488,.F.);+#10884=ADVANCED_FACE('',(#10885),#10941,.F.);+#10885=FACE_BOUND('',#10886,.F.);+#10886=EDGE_LOOP('',(#10887,#10888,#10889,#10896,#10901,#10908,#10913,#10918,#10923,#10929,#10934,#10939));+#10887=ORIENTED_EDGE('',*,*,#2788,.F.);+#10888=ORIENTED_EDGE('',*,*,#2799,.T.);+#10889=ORIENTED_EDGE('',*,*,#10890,.T.);+#10890=EDGE_CURVE('',#2800,#10891,#10893,.T.);+#10891=VERTEX_POINT('',#10892);+#10892=CARTESIAN_POINT('',(3.348480775301,-5.14,0.417364817767));+#10893=CIRCLE('',#10894,0.1);+#10894=AXIS2_PLACEMENT_3D('',#10895,#87,#7536);+#10895=CARTESIAN_POINT('',(3.25,-5.14,0.4));+#10896=ORIENTED_EDGE('',*,*,#10897,.T.);+#10897=EDGE_CURVE('',#10891,#10898,#10900,.T.);+#10898=VERTEX_POINT('',#10899);+#10899=CARTESIAN_POINT('',(3.380247108853,-5.14,0.206587955583));+#10900=LINE('',#10892,#7542);+#10901=ORIENTED_EDGE('',*,*,#10902,.T.);+#10902=EDGE_CURVE('',#10898,#10903,#10905,.T.);+#10903=VERTEX_POINT('',#10904);+#10904=CARTESIAN_POINT('',(3.626449047106,-5.14,5.551115123126E-17));+#10905=CIRCLE('',#10906,0.25);+#10906=AXIS2_PLACEMENT_3D('',#10907,#59,#7551);+#10907=CARTESIAN_POINT('',(3.626449047106,-5.14,0.25));+#10908=ORIENTED_EDGE('',*,*,#10909,.T.);+#10909=EDGE_CURVE('',#10903,#10910,#10912,.T.);+#10910=VERTEX_POINT('',#10911);+#10911=CARTESIAN_POINT('',(4.05,-5.14,5.551115123126E-17));+#10912=LINE('',#10904,#27);+#10913=ORIENTED_EDGE('',*,*,#10914,.T.);+#10914=EDGE_CURVE('',#10910,#10915,#10917,.T.);+#10915=VERTEX_POINT('',#10916);+#10916=CARTESIAN_POINT('',(4.05,-5.14,0.15));+#10917=LINE('',#10911,#754);+#10918=ORIENTED_EDGE('',*,*,#10919,.T.);+#10919=EDGE_CURVE('',#10915,#10920,#10922,.T.);+#10920=VERTEX_POINT('',#10921);+#10921=CARTESIAN_POINT('',(3.626449047106,-5.14,0.15));+#10922=LINE('',#10916,#72);+#10923=ORIENTED_EDGE('',*,*,#10924,.T.);+#10924=EDGE_CURVE('',#10920,#10925,#10927,.T.);+#10925=VERTEX_POINT('',#10926);+#10926=CARTESIAN_POINT('',(3.527968271805,-5.14,0.232635182233));+#10927=CIRCLE('',#10928,0.1);+#10928=AXIS2_PLACEMENT_3D('',#10907,#87,#7573);+#10929=ORIENTED_EDGE('',*,*,#10930,.T.);+#10930=EDGE_CURVE('',#10925,#10931,#10933,.T.);+#10931=VERTEX_POINT('',#10932);+#10932=CARTESIAN_POINT('',(3.496201938253,-5.14,0.443412044417));+#10933=LINE('',#10926,#7579);+#10934=ORIENTED_EDGE('',*,*,#10935,.T.);+#10935=EDGE_CURVE('',#10931,#10936,#10937,.T.);+#10936=VERTEX_POINT('',#10882);+#10937=CIRCLE('',#10938,0.25);+#10938=AXIS2_PLACEMENT_3D('',#10895,#59,#7585);+#10939=ORIENTED_EDGE('',*,*,#10940,.T.);+#10940=EDGE_CURVE('',#10936,#2789,#10881,.T.);+#10941=PLANE('',#10942);+#10942=AXIS2_PLACEMENT_3D('',#10943,#59,#13);+#10943=CARTESIAN_POINT('',(3.487377466565,-5.14,0.305338822795));+#10944=ADVANCED_FACE('',(#10945),#10959,.F.);+#10945=FACE_BOUND('',#10946,.F.);+#10946=EDGE_LOOP('',(#10947,#10948,#10955,#10958));+#10947=ORIENTED_EDGE('',*,*,#2812,.T.);+#10948=ORIENTED_EDGE('',*,*,#10949,.T.);+#10949=EDGE_CURVE('',#2807,#10950,#10952,.T.);+#10950=VERTEX_POINT('',#10951);+#10951=CARTESIAN_POINT('',(3.348480775301,-5.36,0.417364817767));+#10952=CIRCLE('',#10953,0.1);+#10953=AXIS2_PLACEMENT_3D('',#10954,#87,#7536);+#10954=CARTESIAN_POINT('',(3.25,-5.36,0.4));+#10955=ORIENTED_EDGE('',*,*,#10956,.F.);+#10956=EDGE_CURVE('',#10891,#10950,#10957,.T.);+#10957=LINE('',#10892,#58);+#10958=ORIENTED_EDGE('',*,*,#10890,.F.);+#10959=CYLINDRICAL_SURFACE('',#10894,0.1);+#10960=ADVANCED_FACE('',(#10961),#11010,.T.);+#10961=FACE_BOUND('',#10962,.T.);+#10962=EDGE_LOOP('',(#2819,#2805,#10948,#10963,#10968,#10975,#10980,#10985,#10990,#10996,#11001,#11007));+#10963=ORIENTED_EDGE('',*,*,#10964,.T.);+#10964=EDGE_CURVE('',#10950,#10965,#10967,.T.);+#10965=VERTEX_POINT('',#10966);+#10966=CARTESIAN_POINT('',(3.380247108853,-5.36,0.206587955583));+#10967=LINE('',#10951,#7542);+#10968=ORIENTED_EDGE('',*,*,#10969,.T.);+#10969=EDGE_CURVE('',#10965,#10970,#10972,.T.);+#10970=VERTEX_POINT('',#10971);+#10971=CARTESIAN_POINT('',(3.626449047106,-5.36,5.551115123126E-17));+#10972=CIRCLE('',#10973,0.25);+#10973=AXIS2_PLACEMENT_3D('',#10974,#59,#7551);+#10974=CARTESIAN_POINT('',(3.626449047106,-5.36,0.25));+#10975=ORIENTED_EDGE('',*,*,#10976,.T.);+#10976=EDGE_CURVE('',#10970,#10977,#10979,.T.);+#10977=VERTEX_POINT('',#10978);+#10978=CARTESIAN_POINT('',(4.05,-5.36,5.551115123126E-17));+#10979=LINE('',#10971,#27);+#10980=ORIENTED_EDGE('',*,*,#10981,.T.);+#10981=EDGE_CURVE('',#10977,#10982,#10984,.T.);+#10982=VERTEX_POINT('',#10983);+#10983=CARTESIAN_POINT('',(4.05,-5.36,0.15));+#10984=LINE('',#10978,#754);+#10985=ORIENTED_EDGE('',*,*,#10986,.T.);+#10986=EDGE_CURVE('',#10982,#10987,#10989,.T.);+#10987=VERTEX_POINT('',#10988);+#10988=CARTESIAN_POINT('',(3.626449047106,-5.36,0.15));+#10989=LINE('',#10983,#72);+#10990=ORIENTED_EDGE('',*,*,#10991,.T.);+#10991=EDGE_CURVE('',#10987,#10992,#10994,.T.);+#10992=VERTEX_POINT('',#10993);+#10993=CARTESIAN_POINT('',(3.527968271805,-5.36,0.232635182233));+#10994=CIRCLE('',#10995,0.1);+#10995=AXIS2_PLACEMENT_3D('',#10974,#87,#7573);+#10996=ORIENTED_EDGE('',*,*,#10997,.T.);+#10997=EDGE_CURVE('',#10992,#10998,#11000,.T.);+#10998=VERTEX_POINT('',#10999);+#10999=CARTESIAN_POINT('',(3.496201938253,-5.36,0.443412044417));+#11000=LINE('',#10993,#7579);+#11001=ORIENTED_EDGE('',*,*,#11002,.T.);+#11002=EDGE_CURVE('',#10998,#11003,#11005,.T.);+#11003=VERTEX_POINT('',#11004);+#11004=CARTESIAN_POINT('',(3.25,-5.36,0.65));+#11005=CIRCLE('',#11006,0.25);+#11006=AXIS2_PLACEMENT_3D('',#10954,#59,#7585);+#11007=ORIENTED_EDGE('',*,*,#11008,.T.);+#11008=EDGE_CURVE('',#11003,#2821,#11009,.T.);+#11009=LINE('',#11004,#72);+#11010=PLANE('',#11011);+#11011=AXIS2_PLACEMENT_3D('',#11012,#59,#13);+#11012=CARTESIAN_POINT('',(3.487377466565,-5.36,0.305338822795));+#11013=ADVANCED_FACE('',(#11014),#724,.F.);+#11014=FACE_BOUND('',#11015,.F.);+#11015=EDGE_LOOP('',(#11016,#11018,#11019,#11023));+#11016=ORIENTED_EDGE('',*,*,#11017,.F.);+#11017=EDGE_CURVE('',#2821,#3493,#11009,.T.);+#11018=ORIENTED_EDGE('',*,*,#2833,.T.);+#11019=ORIENTED_EDGE('',*,*,#11020,.T.);+#11020=EDGE_CURVE('',#2828,#3497,#11021,.T.);+#11021=LINE('',#11022,#72);+#11022=CARTESIAN_POINT('',(3.25,-5.64,0.65));+#11023=ORIENTED_EDGE('',*,*,#3496,.F.);+#11024=ADVANCED_FACE('',(#11025),#11081,.F.);+#11025=FACE_BOUND('',#11026,.F.);+#11026=EDGE_LOOP('',(#11027,#11028,#11029,#11036,#11041,#11048,#11053,#11058,#11063,#11069,#11074,#11079));+#11027=ORIENTED_EDGE('',*,*,#2827,.F.);+#11028=ORIENTED_EDGE('',*,*,#2838,.T.);+#11029=ORIENTED_EDGE('',*,*,#11030,.T.);+#11030=EDGE_CURVE('',#2839,#11031,#11033,.T.);+#11031=VERTEX_POINT('',#11032);+#11032=CARTESIAN_POINT('',(3.348480775301,-5.64,0.417364817767));+#11033=CIRCLE('',#11034,0.1);+#11034=AXIS2_PLACEMENT_3D('',#11035,#87,#7536);+#11035=CARTESIAN_POINT('',(3.25,-5.64,0.4));+#11036=ORIENTED_EDGE('',*,*,#11037,.T.);+#11037=EDGE_CURVE('',#11031,#11038,#11040,.T.);+#11038=VERTEX_POINT('',#11039);+#11039=CARTESIAN_POINT('',(3.380247108853,-5.64,0.206587955583));+#11040=LINE('',#11032,#7542);+#11041=ORIENTED_EDGE('',*,*,#11042,.T.);+#11042=EDGE_CURVE('',#11038,#11043,#11045,.T.);+#11043=VERTEX_POINT('',#11044);+#11044=CARTESIAN_POINT('',(3.626449047106,-5.64,5.551115123126E-17));+#11045=CIRCLE('',#11046,0.25);+#11046=AXIS2_PLACEMENT_3D('',#11047,#59,#7551);+#11047=CARTESIAN_POINT('',(3.626449047106,-5.64,0.25));+#11048=ORIENTED_EDGE('',*,*,#11049,.T.);+#11049=EDGE_CURVE('',#11043,#11050,#11052,.T.);+#11050=VERTEX_POINT('',#11051);+#11051=CARTESIAN_POINT('',(4.05,-5.64,5.551115123126E-17));+#11052=LINE('',#11044,#27);+#11053=ORIENTED_EDGE('',*,*,#11054,.T.);+#11054=EDGE_CURVE('',#11050,#11055,#11057,.T.);+#11055=VERTEX_POINT('',#11056);+#11056=CARTESIAN_POINT('',(4.05,-5.64,0.15));+#11057=LINE('',#11051,#754);+#11058=ORIENTED_EDGE('',*,*,#11059,.T.);+#11059=EDGE_CURVE('',#11055,#11060,#11062,.T.);+#11060=VERTEX_POINT('',#11061);+#11061=CARTESIAN_POINT('',(3.626449047106,-5.64,0.15));+#11062=LINE('',#11056,#72);+#11063=ORIENTED_EDGE('',*,*,#11064,.T.);+#11064=EDGE_CURVE('',#11060,#11065,#11067,.T.);+#11065=VERTEX_POINT('',#11066);+#11066=CARTESIAN_POINT('',(3.527968271805,-5.64,0.232635182233));+#11067=CIRCLE('',#11068,0.1);+#11068=AXIS2_PLACEMENT_3D('',#11047,#87,#7573);+#11069=ORIENTED_EDGE('',*,*,#11070,.T.);+#11070=EDGE_CURVE('',#11065,#11071,#11073,.T.);+#11071=VERTEX_POINT('',#11072);+#11072=CARTESIAN_POINT('',(3.496201938253,-5.64,0.443412044417));+#11073=LINE('',#11066,#7579);+#11074=ORIENTED_EDGE('',*,*,#11075,.T.);+#11075=EDGE_CURVE('',#11071,#11076,#11077,.T.);+#11076=VERTEX_POINT('',#11022);+#11077=CIRCLE('',#11078,0.25);+#11078=AXIS2_PLACEMENT_3D('',#11035,#59,#7585);+#11079=ORIENTED_EDGE('',*,*,#11080,.T.);+#11080=EDGE_CURVE('',#11076,#2828,#11021,.T.);+#11081=PLANE('',#11082);+#11082=AXIS2_PLACEMENT_3D('',#11083,#59,#13);+#11083=CARTESIAN_POINT('',(3.487377466565,-5.64,0.305338822795));+#11084=ADVANCED_FACE('',(#11085),#11099,.F.);+#11085=FACE_BOUND('',#11086,.F.);+#11086=EDGE_LOOP('',(#11087,#11088,#11095,#11098));+#11087=ORIENTED_EDGE('',*,*,#2851,.T.);+#11088=ORIENTED_EDGE('',*,*,#11089,.T.);+#11089=EDGE_CURVE('',#2846,#11090,#11092,.T.);+#11090=VERTEX_POINT('',#11091);+#11091=CARTESIAN_POINT('',(3.348480775301,-5.86,0.417364817767));+#11092=CIRCLE('',#11093,0.1);+#11093=AXIS2_PLACEMENT_3D('',#11094,#87,#7536);+#11094=CARTESIAN_POINT('',(3.25,-5.86,0.4));+#11095=ORIENTED_EDGE('',*,*,#11096,.F.);+#11096=EDGE_CURVE('',#11031,#11090,#11097,.T.);+#11097=LINE('',#11032,#58);+#11098=ORIENTED_EDGE('',*,*,#11030,.F.);+#11099=CYLINDRICAL_SURFACE('',#11034,0.1);+#11100=ADVANCED_FACE('',(#11101),#11150,.T.);+#11101=FACE_BOUND('',#11102,.T.);+#11102=EDGE_LOOP('',(#2858,#2844,#11088,#11103,#11108,#11115,#11120,#11125,#11130,#11136,#11141,#11147));+#11103=ORIENTED_EDGE('',*,*,#11104,.T.);+#11104=EDGE_CURVE('',#11090,#11105,#11107,.T.);+#11105=VERTEX_POINT('',#11106);+#11106=CARTESIAN_POINT('',(3.380247108853,-5.86,0.206587955583));+#11107=LINE('',#11091,#7542);+#11108=ORIENTED_EDGE('',*,*,#11109,.T.);+#11109=EDGE_CURVE('',#11105,#11110,#11112,.T.);+#11110=VERTEX_POINT('',#11111);+#11111=CARTESIAN_POINT('',(3.626449047106,-5.86,5.551115123126E-17));+#11112=CIRCLE('',#11113,0.25);+#11113=AXIS2_PLACEMENT_3D('',#11114,#59,#7551);+#11114=CARTESIAN_POINT('',(3.626449047106,-5.86,0.25));+#11115=ORIENTED_EDGE('',*,*,#11116,.T.);+#11116=EDGE_CURVE('',#11110,#11117,#11119,.T.);+#11117=VERTEX_POINT('',#11118);+#11118=CARTESIAN_POINT('',(4.05,-5.86,5.551115123126E-17));+#11119=LINE('',#11111,#27);+#11120=ORIENTED_EDGE('',*,*,#11121,.T.);+#11121=EDGE_CURVE('',#11117,#11122,#11124,.T.);+#11122=VERTEX_POINT('',#11123);+#11123=CARTESIAN_POINT('',(4.05,-5.86,0.15));+#11124=LINE('',#11118,#754);+#11125=ORIENTED_EDGE('',*,*,#11126,.T.);+#11126=EDGE_CURVE('',#11122,#11127,#11129,.T.);+#11127=VERTEX_POINT('',#11128);+#11128=CARTESIAN_POINT('',(3.626449047106,-5.86,0.15));+#11129=LINE('',#11123,#72);+#11130=ORIENTED_EDGE('',*,*,#11131,.T.);+#11131=EDGE_CURVE('',#11127,#11132,#11134,.T.);+#11132=VERTEX_POINT('',#11133);+#11133=CARTESIAN_POINT('',(3.527968271805,-5.86,0.232635182233));+#11134=CIRCLE('',#11135,0.1);+#11135=AXIS2_PLACEMENT_3D('',#11114,#87,#7573);+#11136=ORIENTED_EDGE('',*,*,#11137,.T.);+#11137=EDGE_CURVE('',#11132,#11138,#11140,.T.);+#11138=VERTEX_POINT('',#11139);+#11139=CARTESIAN_POINT('',(3.496201938253,-5.86,0.443412044417));+#11140=LINE('',#11133,#7579);+#11141=ORIENTED_EDGE('',*,*,#11142,.T.);+#11142=EDGE_CURVE('',#11138,#11143,#11145,.T.);+#11143=VERTEX_POINT('',#11144);+#11144=CARTESIAN_POINT('',(3.25,-5.86,0.65));+#11145=CIRCLE('',#11146,0.25);+#11146=AXIS2_PLACEMENT_3D('',#11094,#59,#7585);+#11147=ORIENTED_EDGE('',*,*,#11148,.T.);+#11148=EDGE_CURVE('',#11143,#2860,#11149,.T.);+#11149=LINE('',#11144,#72);+#11150=PLANE('',#11151);+#11151=AXIS2_PLACEMENT_3D('',#11152,#59,#13);+#11152=CARTESIAN_POINT('',(3.487377466565,-5.86,0.305338822795));+#11153=ADVANCED_FACE('',(#11154),#724,.F.);+#11154=FACE_BOUND('',#11155,.F.);+#11155=EDGE_LOOP('',(#11156,#11158,#11159,#11163));+#11156=ORIENTED_EDGE('',*,*,#11157,.F.);+#11157=EDGE_CURVE('',#2860,#3501,#11149,.T.);+#11158=ORIENTED_EDGE('',*,*,#2872,.T.);+#11159=ORIENTED_EDGE('',*,*,#11160,.T.);+#11160=EDGE_CURVE('',#2867,#3505,#11161,.T.);+#11161=LINE('',#11162,#72);+#11162=CARTESIAN_POINT('',(3.25,-6.14,0.65));+#11163=ORIENTED_EDGE('',*,*,#3504,.F.);+#11164=ADVANCED_FACE('',(#11165),#11221,.F.);+#11165=FACE_BOUND('',#11166,.F.);+#11166=EDGE_LOOP('',(#11167,#11168,#11169,#11176,#11181,#11188,#11193,#11198,#11203,#11209,#11214,#11219));+#11167=ORIENTED_EDGE('',*,*,#2866,.F.);+#11168=ORIENTED_EDGE('',*,*,#2877,.T.);+#11169=ORIENTED_EDGE('',*,*,#11170,.T.);+#11170=EDGE_CURVE('',#2878,#11171,#11173,.T.);+#11171=VERTEX_POINT('',#11172);+#11172=CARTESIAN_POINT('',(3.348480775301,-6.14,0.417364817767));+#11173=CIRCLE('',#11174,0.1);+#11174=AXIS2_PLACEMENT_3D('',#11175,#87,#7536);+#11175=CARTESIAN_POINT('',(3.25,-6.14,0.4));+#11176=ORIENTED_EDGE('',*,*,#11177,.T.);+#11177=EDGE_CURVE('',#11171,#11178,#11180,.T.);+#11178=VERTEX_POINT('',#11179);+#11179=CARTESIAN_POINT('',(3.380247108853,-6.14,0.206587955583));+#11180=LINE('',#11172,#7542);+#11181=ORIENTED_EDGE('',*,*,#11182,.T.);+#11182=EDGE_CURVE('',#11178,#11183,#11185,.T.);+#11183=VERTEX_POINT('',#11184);+#11184=CARTESIAN_POINT('',(3.626449047106,-6.14,5.551115123126E-17));+#11185=CIRCLE('',#11186,0.25);+#11186=AXIS2_PLACEMENT_3D('',#11187,#59,#7551);+#11187=CARTESIAN_POINT('',(3.626449047106,-6.14,0.25));+#11188=ORIENTED_EDGE('',*,*,#11189,.T.);+#11189=EDGE_CURVE('',#11183,#11190,#11192,.T.);+#11190=VERTEX_POINT('',#11191);+#11191=CARTESIAN_POINT('',(4.05,-6.14,5.551115123126E-17));+#11192=LINE('',#11184,#27);+#11193=ORIENTED_EDGE('',*,*,#11194,.T.);+#11194=EDGE_CURVE('',#11190,#11195,#11197,.T.);+#11195=VERTEX_POINT('',#11196);+#11196=CARTESIAN_POINT('',(4.05,-6.14,0.15));+#11197=LINE('',#11191,#754);+#11198=ORIENTED_EDGE('',*,*,#11199,.T.);+#11199=EDGE_CURVE('',#11195,#11200,#11202,.T.);+#11200=VERTEX_POINT('',#11201);+#11201=CARTESIAN_POINT('',(3.626449047106,-6.14,0.15));+#11202=LINE('',#11196,#72);+#11203=ORIENTED_EDGE('',*,*,#11204,.T.);+#11204=EDGE_CURVE('',#11200,#11205,#11207,.T.);+#11205=VERTEX_POINT('',#11206);+#11206=CARTESIAN_POINT('',(3.527968271805,-6.14,0.232635182233));+#11207=CIRCLE('',#11208,0.1);+#11208=AXIS2_PLACEMENT_3D('',#11187,#87,#7573);+#11209=ORIENTED_EDGE('',*,*,#11210,.T.);+#11210=EDGE_CURVE('',#11205,#11211,#11213,.T.);+#11211=VERTEX_POINT('',#11212);+#11212=CARTESIAN_POINT('',(3.496201938253,-6.14,0.443412044417));+#11213=LINE('',#11206,#7579);+#11214=ORIENTED_EDGE('',*,*,#11215,.T.);+#11215=EDGE_CURVE('',#11211,#11216,#11217,.T.);+#11216=VERTEX_POINT('',#11162);+#11217=CIRCLE('',#11218,0.25);+#11218=AXIS2_PLACEMENT_3D('',#11175,#59,#7585);+#11219=ORIENTED_EDGE('',*,*,#11220,.T.);+#11220=EDGE_CURVE('',#11216,#2867,#11161,.T.);+#11221=PLANE('',#11222);+#11222=AXIS2_PLACEMENT_3D('',#11223,#59,#13);+#11223=CARTESIAN_POINT('',(3.487377466565,-6.14,0.305338822795));+#11224=ADVANCED_FACE('',(#11225),#11239,.F.);+#11225=FACE_BOUND('',#11226,.F.);+#11226=EDGE_LOOP('',(#11227,#11228,#11235,#11238));+#11227=ORIENTED_EDGE('',*,*,#2890,.T.);+#11228=ORIENTED_EDGE('',*,*,#11229,.T.);+#11229=EDGE_CURVE('',#2885,#11230,#11232,.T.);+#11230=VERTEX_POINT('',#11231);+#11231=CARTESIAN_POINT('',(3.348480775301,-6.36,0.417364817767));+#11232=CIRCLE('',#11233,0.1);+#11233=AXIS2_PLACEMENT_3D('',#11234,#87,#7536);+#11234=CARTESIAN_POINT('',(3.25,-6.36,0.4));+#11235=ORIENTED_EDGE('',*,*,#11236,.F.);+#11236=EDGE_CURVE('',#11171,#11230,#11237,.T.);+#11237=LINE('',#11172,#58);+#11238=ORIENTED_EDGE('',*,*,#11170,.F.);+#11239=CYLINDRICAL_SURFACE('',#11174,0.1);+#11240=ADVANCED_FACE('',(#11241),#11290,.T.);+#11241=FACE_BOUND('',#11242,.T.);+#11242=EDGE_LOOP('',(#2897,#2883,#11228,#11243,#11248,#11255,#11260,#11265,#11270,#11276,#11281,#11287));+#11243=ORIENTED_EDGE('',*,*,#11244,.T.);+#11244=EDGE_CURVE('',#11230,#11245,#11247,.T.);+#11245=VERTEX_POINT('',#11246);+#11246=CARTESIAN_POINT('',(3.380247108853,-6.36,0.206587955583));+#11247=LINE('',#11231,#7542);+#11248=ORIENTED_EDGE('',*,*,#11249,.T.);+#11249=EDGE_CURVE('',#11245,#11250,#11252,.T.);+#11250=VERTEX_POINT('',#11251);+#11251=CARTESIAN_POINT('',(3.626449047106,-6.36,5.551115123126E-17));+#11252=CIRCLE('',#11253,0.25);+#11253=AXIS2_PLACEMENT_3D('',#11254,#59,#7551);+#11254=CARTESIAN_POINT('',(3.626449047106,-6.36,0.25));+#11255=ORIENTED_EDGE('',*,*,#11256,.T.);+#11256=EDGE_CURVE('',#11250,#11257,#11259,.T.);+#11257=VERTEX_POINT('',#11258);+#11258=CARTESIAN_POINT('',(4.05,-6.36,5.551115123126E-17));+#11259=LINE('',#11251,#27);+#11260=ORIENTED_EDGE('',*,*,#11261,.T.);+#11261=EDGE_CURVE('',#11257,#11262,#11264,.T.);+#11262=VERTEX_POINT('',#11263);+#11263=CARTESIAN_POINT('',(4.05,-6.36,0.15));+#11264=LINE('',#11258,#754);+#11265=ORIENTED_EDGE('',*,*,#11266,.T.);+#11266=EDGE_CURVE('',#11262,#11267,#11269,.T.);+#11267=VERTEX_POINT('',#11268);+#11268=CARTESIAN_POINT('',(3.626449047106,-6.36,0.15));+#11269=LINE('',#11263,#72);+#11270=ORIENTED_EDGE('',*,*,#11271,.T.);+#11271=EDGE_CURVE('',#11267,#11272,#11274,.T.);+#11272=VERTEX_POINT('',#11273);+#11273=CARTESIAN_POINT('',(3.527968271805,-6.36,0.232635182233));+#11274=CIRCLE('',#11275,0.1);+#11275=AXIS2_PLACEMENT_3D('',#11254,#87,#7573);+#11276=ORIENTED_EDGE('',*,*,#11277,.T.);+#11277=EDGE_CURVE('',#11272,#11278,#11280,.T.);+#11278=VERTEX_POINT('',#11279);+#11279=CARTESIAN_POINT('',(3.496201938253,-6.36,0.443412044417));+#11280=LINE('',#11273,#7579);+#11281=ORIENTED_EDGE('',*,*,#11282,.T.);+#11282=EDGE_CURVE('',#11278,#11283,#11285,.T.);+#11283=VERTEX_POINT('',#11284);+#11284=CARTESIAN_POINT('',(3.25,-6.36,0.65));+#11285=CIRCLE('',#11286,0.25);+#11286=AXIS2_PLACEMENT_3D('',#11234,#59,#7585);+#11287=ORIENTED_EDGE('',*,*,#11288,.T.);+#11288=EDGE_CURVE('',#11283,#2899,#11289,.T.);+#11289=LINE('',#11284,#72);+#11290=PLANE('',#11291);+#11291=AXIS2_PLACEMENT_3D('',#11292,#59,#13);+#11292=CARTESIAN_POINT('',(3.487377466565,-6.36,0.305338822795));+#11293=ADVANCED_FACE('',(#11294),#724,.F.);+#11294=FACE_BOUND('',#11295,.F.);+#11295=EDGE_LOOP('',(#11296,#11298,#11299,#11303));+#11296=ORIENTED_EDGE('',*,*,#11297,.F.);+#11297=EDGE_CURVE('',#2899,#3509,#11289,.T.);+#11298=ORIENTED_EDGE('',*,*,#2911,.T.);+#11299=ORIENTED_EDGE('',*,*,#11300,.T.);+#11300=EDGE_CURVE('',#2906,#3513,#11301,.T.);+#11301=LINE('',#11302,#72);+#11302=CARTESIAN_POINT('',(3.25,-6.64,0.65));+#11303=ORIENTED_EDGE('',*,*,#3512,.F.);+#11304=ADVANCED_FACE('',(#11305),#11361,.F.);+#11305=FACE_BOUND('',#11306,.F.);+#11306=EDGE_LOOP('',(#11307,#11308,#11309,#11316,#11321,#11328,#11333,#11338,#11343,#11349,#11354,#11359));+#11307=ORIENTED_EDGE('',*,*,#2905,.F.);+#11308=ORIENTED_EDGE('',*,*,#2916,.T.);+#11309=ORIENTED_EDGE('',*,*,#11310,.T.);+#11310=EDGE_CURVE('',#2917,#11311,#11313,.T.);+#11311=VERTEX_POINT('',#11312);+#11312=CARTESIAN_POINT('',(3.348480775301,-6.64,0.417364817767));+#11313=CIRCLE('',#11314,0.1);+#11314=AXIS2_PLACEMENT_3D('',#11315,#87,#7536);+#11315=CARTESIAN_POINT('',(3.25,-6.64,0.4));+#11316=ORIENTED_EDGE('',*,*,#11317,.T.);+#11317=EDGE_CURVE('',#11311,#11318,#11320,.T.);+#11318=VERTEX_POINT('',#11319);+#11319=CARTESIAN_POINT('',(3.380247108853,-6.64,0.206587955583));+#11320=LINE('',#11312,#7542);+#11321=ORIENTED_EDGE('',*,*,#11322,.T.);+#11322=EDGE_CURVE('',#11318,#11323,#11325,.T.);+#11323=VERTEX_POINT('',#11324);+#11324=CARTESIAN_POINT('',(3.626449047106,-6.64,5.551115123126E-17));+#11325=CIRCLE('',#11326,0.25);+#11326=AXIS2_PLACEMENT_3D('',#11327,#59,#7551);+#11327=CARTESIAN_POINT('',(3.626449047106,-6.64,0.25));+#11328=ORIENTED_EDGE('',*,*,#11329,.T.);+#11329=EDGE_CURVE('',#11323,#11330,#11332,.T.);+#11330=VERTEX_POINT('',#11331);+#11331=CARTESIAN_POINT('',(4.05,-6.64,5.551115123126E-17));+#11332=LINE('',#11324,#27);+#11333=ORIENTED_EDGE('',*,*,#11334,.T.);+#11334=EDGE_CURVE('',#11330,#11335,#11337,.T.);+#11335=VERTEX_POINT('',#11336);+#11336=CARTESIAN_POINT('',(4.05,-6.64,0.15));+#11337=LINE('',#11331,#754);+#11338=ORIENTED_EDGE('',*,*,#11339,.T.);+#11339=EDGE_CURVE('',#11335,#11340,#11342,.T.);+#11340=VERTEX_POINT('',#11341);+#11341=CARTESIAN_POINT('',(3.626449047106,-6.64,0.15));+#11342=LINE('',#11336,#72);+#11343=ORIENTED_EDGE('',*,*,#11344,.T.);+#11344=EDGE_CURVE('',#11340,#11345,#11347,.T.);+#11345=VERTEX_POINT('',#11346);+#11346=CARTESIAN_POINT('',(3.527968271805,-6.64,0.232635182233));+#11347=CIRCLE('',#11348,0.1);+#11348=AXIS2_PLACEMENT_3D('',#11327,#87,#7573);+#11349=ORIENTED_EDGE('',*,*,#11350,.T.);+#11350=EDGE_CURVE('',#11345,#11351,#11353,.T.);+#11351=VERTEX_POINT('',#11352);+#11352=CARTESIAN_POINT('',(3.496201938253,-6.64,0.443412044417));+#11353=LINE('',#11346,#7579);+#11354=ORIENTED_EDGE('',*,*,#11355,.T.);+#11355=EDGE_CURVE('',#11351,#11356,#11357,.T.);+#11356=VERTEX_POINT('',#11302);+#11357=CIRCLE('',#11358,0.25);+#11358=AXIS2_PLACEMENT_3D('',#11315,#59,#7585);+#11359=ORIENTED_EDGE('',*,*,#11360,.T.);+#11360=EDGE_CURVE('',#11356,#2906,#11301,.T.);+#11361=PLANE('',#11362);+#11362=AXIS2_PLACEMENT_3D('',#11363,#59,#13);+#11363=CARTESIAN_POINT('',(3.487377466565,-6.64,0.305338822795));+#11364=ADVANCED_FACE('',(#11365),#11379,.F.);+#11365=FACE_BOUND('',#11366,.F.);+#11366=EDGE_LOOP('',(#11367,#11368,#11375,#11378));+#11367=ORIENTED_EDGE('',*,*,#2929,.T.);+#11368=ORIENTED_EDGE('',*,*,#11369,.T.);+#11369=EDGE_CURVE('',#2924,#11370,#11372,.T.);+#11370=VERTEX_POINT('',#11371);+#11371=CARTESIAN_POINT('',(3.348480775301,-6.86,0.417364817767));+#11372=CIRCLE('',#11373,0.1);+#11373=AXIS2_PLACEMENT_3D('',#11374,#87,#7536);+#11374=CARTESIAN_POINT('',(3.25,-6.86,0.4));+#11375=ORIENTED_EDGE('',*,*,#11376,.F.);+#11376=EDGE_CURVE('',#11311,#11370,#11377,.T.);+#11377=LINE('',#11312,#58);+#11378=ORIENTED_EDGE('',*,*,#11310,.F.);+#11379=CYLINDRICAL_SURFACE('',#11314,0.1);+#11380=ADVANCED_FACE('',(#11381),#11428,.T.);+#11381=FACE_BOUND('',#11382,.T.);+#11382=EDGE_LOOP('',(#2936,#2922,#11368,#11383,#11388,#11395,#11400,#11405,#11410,#11416,#11421,#11426));+#11383=ORIENTED_EDGE('',*,*,#11384,.T.);+#11384=EDGE_CURVE('',#11370,#11385,#11387,.T.);+#11385=VERTEX_POINT('',#11386);+#11386=CARTESIAN_POINT('',(3.380247108853,-6.86,0.206587955583));+#11387=LINE('',#11371,#7542);+#11388=ORIENTED_EDGE('',*,*,#11389,.T.);+#11389=EDGE_CURVE('',#11385,#11390,#11392,.T.);+#11390=VERTEX_POINT('',#11391);+#11391=CARTESIAN_POINT('',(3.626449047106,-6.86,5.551115123126E-17));+#11392=CIRCLE('',#11393,0.25);+#11393=AXIS2_PLACEMENT_3D('',#11394,#59,#7551);+#11394=CARTESIAN_POINT('',(3.626449047106,-6.86,0.25));+#11395=ORIENTED_EDGE('',*,*,#11396,.T.);+#11396=EDGE_CURVE('',#11390,#11397,#11399,.T.);+#11397=VERTEX_POINT('',#11398);+#11398=CARTESIAN_POINT('',(4.05,-6.86,5.551115123126E-17));+#11399=LINE('',#11391,#27);+#11400=ORIENTED_EDGE('',*,*,#11401,.T.);+#11401=EDGE_CURVE('',#11397,#11402,#11404,.T.);+#11402=VERTEX_POINT('',#11403);+#11403=CARTESIAN_POINT('',(4.05,-6.86,0.15));+#11404=LINE('',#11398,#754);+#11405=ORIENTED_EDGE('',*,*,#11406,.T.);+#11406=EDGE_CURVE('',#11402,#11407,#11409,.T.);+#11407=VERTEX_POINT('',#11408);+#11408=CARTESIAN_POINT('',(3.626449047106,-6.86,0.15));+#11409=LINE('',#11403,#72);+#11410=ORIENTED_EDGE('',*,*,#11411,.T.);+#11411=EDGE_CURVE('',#11407,#11412,#11414,.T.);+#11412=VERTEX_POINT('',#11413);+#11413=CARTESIAN_POINT('',(3.527968271805,-6.86,0.232635182233));+#11414=CIRCLE('',#11415,0.1);+#11415=AXIS2_PLACEMENT_3D('',#11394,#87,#7573);+#11416=ORIENTED_EDGE('',*,*,#11417,.T.);+#11417=EDGE_CURVE('',#11412,#11418,#11420,.T.);+#11418=VERTEX_POINT('',#11419);+#11419=CARTESIAN_POINT('',(3.496201938253,-6.86,0.443412044417));+#11420=LINE('',#11413,#7579);+#11421=ORIENTED_EDGE('',*,*,#11422,.T.);+#11422=EDGE_CURVE('',#11418,#11423,#11424,.T.);+#11423=VERTEX_POINT('',#3579);+#11424=CIRCLE('',#11425,0.25);+#11425=AXIS2_PLACEMENT_3D('',#11374,#59,#7585);+#11426=ORIENTED_EDGE('',*,*,#11427,.T.);+#11427=EDGE_CURVE('',#11423,#2938,#3578,.T.);+#11428=PLANE('',#11429);+#11429=AXIS2_PLACEMENT_3D('',#11430,#59,#13);+#11430=CARTESIAN_POINT('',(3.487377466565,-6.86,0.305338822795));+#11431=ADVANCED_FACE('',(#11432),#11439,.T.);+#11432=FACE_BOUND('',#11433,.F.);+#11433=EDGE_LOOP('',(#11434,#7517,#11437,#11438));+#11434=ORIENTED_EDGE('',*,*,#11435,.T.);+#11435=EDGE_CURVE('',#7448,#7514,#11436,.T.);+#11436=LINE('',#7449,#780);+#11437=ORIENTED_EDGE('',*,*,#3000,.F.);+#11438=ORIENTED_EDGE('',*,*,#7452,.F.);+#11439=CYLINDRICAL_SURFACE('',#11440,0.25);+#11440=AXIS2_PLACEMENT_3D('',#7412,#3673,#3650);+#11441=ADVANCED_FACE('',(#11442),#11451,.F.);+#11442=FACE_BOUND('',#11443,.F.);+#11443=EDGE_LOOP('',(#11444,#11445,#3721,#11448,#11449,#11450));+#11444=ORIENTED_EDGE('',*,*,#3652,.F.);+#11445=ORIENTED_EDGE('',*,*,#11446,.T.);+#11446=EDGE_CURVE('',#3646,#3717,#11447,.T.);+#11447=LINE('',#3560,#780);+#11448=ORIENTED_EDGE('',*,*,#3737,.T.);+#11449=ORIENTED_EDGE('',*,*,#3024,.F.);+#11450=ORIENTED_EDGE('',*,*,#3558,.F.);+#11451=PLANE('',#11452);+#11452=AXIS2_PLACEMENT_3D('',#3560,#3014,#719);+#11453=ADVANCED_FACE('',(#11454),#11463,.F.);+#11454=FACE_BOUND('',#11455,.F.);+#11455=EDGE_LOOP('',(#11456,#11457,#3862,#11460,#11461,#11462));+#11456=ORIENTED_EDGE('',*,*,#3794,.F.);+#11457=ORIENTED_EDGE('',*,*,#11458,.T.);+#11458=EDGE_CURVE('',#3790,#3858,#11459,.T.);+#11459=LINE('',#3734,#780);+#11460=ORIENTED_EDGE('',*,*,#3878,.T.);+#11461=ORIENTED_EDGE('',*,*,#3032,.F.);+#11462=ORIENTED_EDGE('',*,*,#3732,.F.);+#11463=PLANE('',#11464);+#11464=AXIS2_PLACEMENT_3D('',#3734,#3014,#719);+#11465=ADVANCED_FACE('',(#11466),#11475,.F.);+#11466=FACE_BOUND('',#11467,.F.);+#11467=EDGE_LOOP('',(#11468,#11469,#4003,#11472,#11473,#11474));+#11468=ORIENTED_EDGE('',*,*,#3935,.F.);+#11469=ORIENTED_EDGE('',*,*,#11470,.T.);+#11470=EDGE_CURVE('',#3931,#3999,#11471,.T.);+#11471=LINE('',#3875,#780);+#11472=ORIENTED_EDGE('',*,*,#4019,.T.);+#11473=ORIENTED_EDGE('',*,*,#3040,.F.);+#11474=ORIENTED_EDGE('',*,*,#3873,.F.);+#11475=PLANE('',#11476);+#11476=AXIS2_PLACEMENT_3D('',#3875,#3014,#719);+#11477=ADVANCED_FACE('',(#11478),#11487,.F.);+#11478=FACE_BOUND('',#11479,.F.);+#11479=EDGE_LOOP('',(#11480,#11481,#4144,#11484,#11485,#11486));+#11480=ORIENTED_EDGE('',*,*,#4076,.F.);+#11481=ORIENTED_EDGE('',*,*,#11482,.T.);+#11482=EDGE_CURVE('',#4072,#4140,#11483,.T.);+#11483=LINE('',#4016,#780);+#11484=ORIENTED_EDGE('',*,*,#4160,.T.);+#11485=ORIENTED_EDGE('',*,*,#3048,.F.);+#11486=ORIENTED_EDGE('',*,*,#4014,.F.);+#11487=PLANE('',#11488);+#11488=AXIS2_PLACEMENT_3D('',#4016,#3014,#719);+#11489=ADVANCED_FACE('',(#11490),#11499,.F.);+#11490=FACE_BOUND('',#11491,.F.);+#11491=EDGE_LOOP('',(#11492,#11493,#4285,#11496,#11497,#11498));+#11492=ORIENTED_EDGE('',*,*,#4217,.F.);+#11493=ORIENTED_EDGE('',*,*,#11494,.T.);+#11494=EDGE_CURVE('',#4213,#4281,#11495,.T.);+#11495=LINE('',#4157,#780);+#11496=ORIENTED_EDGE('',*,*,#4301,.T.);+#11497=ORIENTED_EDGE('',*,*,#3056,.F.);+#11498=ORIENTED_EDGE('',*,*,#4155,.F.);+#11499=PLANE('',#11500);+#11500=AXIS2_PLACEMENT_3D('',#4157,#3014,#719);+#11501=ADVANCED_FACE('',(#11502),#11511,.F.);+#11502=FACE_BOUND('',#11503,.F.);+#11503=EDGE_LOOP('',(#11504,#11505,#4426,#11508,#11509,#11510));+#11504=ORIENTED_EDGE('',*,*,#4358,.F.);+#11505=ORIENTED_EDGE('',*,*,#11506,.T.);+#11506=EDGE_CURVE('',#4354,#4422,#11507,.T.);+#11507=LINE('',#4298,#780);+#11508=ORIENTED_EDGE('',*,*,#4442,.T.);+#11509=ORIENTED_EDGE('',*,*,#3064,.F.);+#11510=ORIENTED_EDGE('',*,*,#4296,.F.);+#11511=PLANE('',#11512);+#11512=AXIS2_PLACEMENT_3D('',#4298,#3014,#719);+#11513=ADVANCED_FACE('',(#11514),#11523,.F.);+#11514=FACE_BOUND('',#11515,.F.);+#11515=EDGE_LOOP('',(#11516,#11517,#4567,#11520,#11521,#11522));+#11516=ORIENTED_EDGE('',*,*,#4499,.F.);+#11517=ORIENTED_EDGE('',*,*,#11518,.T.);+#11518=EDGE_CURVE('',#4495,#4563,#11519,.T.);+#11519=LINE('',#4439,#780);+#11520=ORIENTED_EDGE('',*,*,#4583,.T.);+#11521=ORIENTED_EDGE('',*,*,#3072,.F.);+#11522=ORIENTED_EDGE('',*,*,#4437,.F.);+#11523=PLANE('',#11524);+#11524=AXIS2_PLACEMENT_3D('',#4439,#3014,#719);+#11525=ADVANCED_FACE('',(#11526),#11535,.F.);+#11526=FACE_BOUND('',#11527,.F.);+#11527=EDGE_LOOP('',(#11528,#11529,#4708,#11532,#11533,#11534));+#11528=ORIENTED_EDGE('',*,*,#4640,.F.);+#11529=ORIENTED_EDGE('',*,*,#11530,.T.);+#11530=EDGE_CURVE('',#4636,#4704,#11531,.T.);+#11531=LINE('',#4580,#780);+#11532=ORIENTED_EDGE('',*,*,#4724,.T.);+#11533=ORIENTED_EDGE('',*,*,#3080,.F.);+#11534=ORIENTED_EDGE('',*,*,#4578,.F.);+#11535=PLANE('',#11536);+#11536=AXIS2_PLACEMENT_3D('',#4580,#3014,#719);+#11537=ADVANCED_FACE('',(#11538),#11547,.F.);+#11538=FACE_BOUND('',#11539,.F.);+#11539=EDGE_LOOP('',(#11540,#11541,#4849,#11544,#11545,#11546));+#11540=ORIENTED_EDGE('',*,*,#4781,.F.);+#11541=ORIENTED_EDGE('',*,*,#11542,.T.);+#11542=EDGE_CURVE('',#4777,#4845,#11543,.T.);+#11543=LINE('',#4721,#780);+#11544=ORIENTED_EDGE('',*,*,#4865,.T.);+#11545=ORIENTED_EDGE('',*,*,#3088,.F.);+#11546=ORIENTED_EDGE('',*,*,#4719,.F.);+#11547=PLANE('',#11548);+#11548=AXIS2_PLACEMENT_3D('',#4721,#3014,#719);+#11549=ADVANCED_FACE('',(#11550),#11559,.F.);+#11550=FACE_BOUND('',#11551,.F.);+#11551=EDGE_LOOP('',(#11552,#11553,#4990,#11556,#11557,#11558));+#11552=ORIENTED_EDGE('',*,*,#4922,.F.);+#11553=ORIENTED_EDGE('',*,*,#11554,.T.);+#11554=EDGE_CURVE('',#4918,#4986,#11555,.T.);+#11555=LINE('',#4862,#780);+#11556=ORIENTED_EDGE('',*,*,#5006,.T.);+#11557=ORIENTED_EDGE('',*,*,#3096,.F.);+#11558=ORIENTED_EDGE('',*,*,#4860,.F.);+#11559=PLANE('',#11560);+#11560=AXIS2_PLACEMENT_3D('',#4862,#3014,#719);+#11561=ADVANCED_FACE('',(#11562),#11571,.F.);+#11562=FACE_BOUND('',#11563,.F.);+#11563=EDGE_LOOP('',(#11564,#11565,#5131,#11568,#11569,#11570));+#11564=ORIENTED_EDGE('',*,*,#5063,.F.);+#11565=ORIENTED_EDGE('',*,*,#11566,.T.);+#11566=EDGE_CURVE('',#5059,#5127,#11567,.T.);+#11567=LINE('',#5003,#780);+#11568=ORIENTED_EDGE('',*,*,#5147,.T.);+#11569=ORIENTED_EDGE('',*,*,#3104,.F.);+#11570=ORIENTED_EDGE('',*,*,#5001,.F.);+#11571=PLANE('',#11572);+#11572=AXIS2_PLACEMENT_3D('',#5003,#3014,#719);+#11573=ADVANCED_FACE('',(#11574),#11583,.F.);+#11574=FACE_BOUND('',#11575,.F.);+#11575=EDGE_LOOP('',(#11576,#11577,#5272,#11580,#11581,#11582));+#11576=ORIENTED_EDGE('',*,*,#5204,.F.);+#11577=ORIENTED_EDGE('',*,*,#11578,.T.);+#11578=EDGE_CURVE('',#5200,#5268,#11579,.T.);+#11579=LINE('',#5144,#780);+#11580=ORIENTED_EDGE('',*,*,#5288,.T.);+#11581=ORIENTED_EDGE('',*,*,#3112,.F.);+#11582=ORIENTED_EDGE('',*,*,#5142,.F.);+#11583=PLANE('',#11584);+#11584=AXIS2_PLACEMENT_3D('',#5144,#3014,#719);+#11585=ADVANCED_FACE('',(#11586),#11595,.F.);+#11586=FACE_BOUND('',#11587,.F.);+#11587=EDGE_LOOP('',(#11588,#11589,#5413,#11592,#11593,#11594));+#11588=ORIENTED_EDGE('',*,*,#5345,.F.);+#11589=ORIENTED_EDGE('',*,*,#11590,.T.);+#11590=EDGE_CURVE('',#5341,#5409,#11591,.T.);+#11591=LINE('',#5285,#780);+#11592=ORIENTED_EDGE('',*,*,#5429,.T.);+#11593=ORIENTED_EDGE('',*,*,#3120,.F.);+#11594=ORIENTED_EDGE('',*,*,#5283,.F.);+#11595=PLANE('',#11596);+#11596=AXIS2_PLACEMENT_3D('',#5285,#3014,#719);+#11597=ADVANCED_FACE('',(#11598),#11607,.F.);+#11598=FACE_BOUND('',#11599,.F.);+#11599=EDGE_LOOP('',(#11600,#11601,#5554,#11604,#11605,#11606));+#11600=ORIENTED_EDGE('',*,*,#5486,.F.);+#11601=ORIENTED_EDGE('',*,*,#11602,.T.);+#11602=EDGE_CURVE('',#5482,#5550,#11603,.T.);+#11603=LINE('',#5426,#780);+#11604=ORIENTED_EDGE('',*,*,#5570,.T.);+#11605=ORIENTED_EDGE('',*,*,#3128,.F.);+#11606=ORIENTED_EDGE('',*,*,#5424,.F.);+#11607=PLANE('',#11608);+#11608=AXIS2_PLACEMENT_3D('',#5426,#3014,#719);+#11609=ADVANCED_FACE('',(#11610),#11619,.F.);+#11610=FACE_BOUND('',#11611,.F.);+#11611=EDGE_LOOP('',(#11612,#11613,#5695,#11616,#11617,#11618));+#11612=ORIENTED_EDGE('',*,*,#5627,.F.);+#11613=ORIENTED_EDGE('',*,*,#11614,.T.);+#11614=EDGE_CURVE('',#5623,#5691,#11615,.T.);+#11615=LINE('',#5567,#780);+#11616=ORIENTED_EDGE('',*,*,#5711,.T.);+#11617=ORIENTED_EDGE('',*,*,#3136,.F.);+#11618=ORIENTED_EDGE('',*,*,#5565,.F.);+#11619=PLANE('',#11620);+#11620=AXIS2_PLACEMENT_3D('',#5567,#3014,#719);+#11621=ADVANCED_FACE('',(#11622),#11631,.F.);+#11622=FACE_BOUND('',#11623,.F.);+#11623=EDGE_LOOP('',(#11624,#11625,#5836,#11628,#11629,#11630));+#11624=ORIENTED_EDGE('',*,*,#5768,.F.);+#11625=ORIENTED_EDGE('',*,*,#11626,.T.);+#11626=EDGE_CURVE('',#5764,#5832,#11627,.T.);+#11627=LINE('',#5708,#780);+#11628=ORIENTED_EDGE('',*,*,#5852,.T.);+#11629=ORIENTED_EDGE('',*,*,#3144,.F.);+#11630=ORIENTED_EDGE('',*,*,#5706,.F.);+#11631=PLANE('',#11632);+#11632=AXIS2_PLACEMENT_3D('',#5708,#3014,#719);+#11633=ADVANCED_FACE('',(#11634),#11643,.F.);+#11634=FACE_BOUND('',#11635,.F.);+#11635=EDGE_LOOP('',(#11636,#11637,#5977,#11640,#11641,#11642));+#11636=ORIENTED_EDGE('',*,*,#5909,.F.);+#11637=ORIENTED_EDGE('',*,*,#11638,.T.);+#11638=EDGE_CURVE('',#5905,#5973,#11639,.T.);+#11639=LINE('',#5849,#780);+#11640=ORIENTED_EDGE('',*,*,#5993,.T.);+#11641=ORIENTED_EDGE('',*,*,#3152,.F.);+#11642=ORIENTED_EDGE('',*,*,#5847,.F.);+#11643=PLANE('',#11644);+#11644=AXIS2_PLACEMENT_3D('',#5849,#3014,#719);+#11645=ADVANCED_FACE('',(#11646),#11655,.F.);+#11646=FACE_BOUND('',#11647,.F.);+#11647=EDGE_LOOP('',(#11648,#11649,#6118,#11652,#11653,#11654));+#11648=ORIENTED_EDGE('',*,*,#6050,.F.);+#11649=ORIENTED_EDGE('',*,*,#11650,.T.);+#11650=EDGE_CURVE('',#6046,#6114,#11651,.T.);+#11651=LINE('',#5990,#780);+#11652=ORIENTED_EDGE('',*,*,#6134,.T.);+#11653=ORIENTED_EDGE('',*,*,#3160,.F.);+#11654=ORIENTED_EDGE('',*,*,#5988,.F.);+#11655=PLANE('',#11656);+#11656=AXIS2_PLACEMENT_3D('',#5990,#3014,#719);+#11657=ADVANCED_FACE('',(#11658),#11667,.F.);+#11658=FACE_BOUND('',#11659,.F.);+#11659=EDGE_LOOP('',(#11660,#11661,#6259,#11664,#11665,#11666));+#11660=ORIENTED_EDGE('',*,*,#6191,.F.);+#11661=ORIENTED_EDGE('',*,*,#11662,.T.);+#11662=EDGE_CURVE('',#6187,#6255,#11663,.T.);+#11663=LINE('',#6131,#780);+#11664=ORIENTED_EDGE('',*,*,#6275,.T.);+#11665=ORIENTED_EDGE('',*,*,#3168,.F.);+#11666=ORIENTED_EDGE('',*,*,#6129,.F.);+#11667=PLANE('',#11668);+#11668=AXIS2_PLACEMENT_3D('',#6131,#3014,#719);+#11669=ADVANCED_FACE('',(#11670),#11679,.F.);+#11670=FACE_BOUND('',#11671,.F.);+#11671=EDGE_LOOP('',(#11672,#11673,#6400,#11676,#11677,#11678));+#11672=ORIENTED_EDGE('',*,*,#6332,.F.);+#11673=ORIENTED_EDGE('',*,*,#11674,.T.);+#11674=EDGE_CURVE('',#6328,#6396,#11675,.T.);+#11675=LINE('',#6272,#780);+#11676=ORIENTED_EDGE('',*,*,#6416,.T.);+#11677=ORIENTED_EDGE('',*,*,#3176,.F.);+#11678=ORIENTED_EDGE('',*,*,#6270,.F.);+#11679=PLANE('',#11680);+#11680=AXIS2_PLACEMENT_3D('',#6272,#3014,#719);+#11681=ADVANCED_FACE('',(#11682),#11691,.F.);+#11682=FACE_BOUND('',#11683,.F.);+#11683=EDGE_LOOP('',(#11684,#11685,#6541,#11688,#11689,#11690));+#11684=ORIENTED_EDGE('',*,*,#6473,.F.);+#11685=ORIENTED_EDGE('',*,*,#11686,.T.);+#11686=EDGE_CURVE('',#6469,#6537,#11687,.T.);+#11687=LINE('',#6413,#780);+#11688=ORIENTED_EDGE('',*,*,#6557,.T.);+#11689=ORIENTED_EDGE('',*,*,#3184,.F.);+#11690=ORIENTED_EDGE('',*,*,#6411,.F.);+#11691=PLANE('',#11692);+#11692=AXIS2_PLACEMENT_3D('',#6413,#3014,#719);+#11693=ADVANCED_FACE('',(#11694),#11703,.F.);+#11694=FACE_BOUND('',#11695,.F.);+#11695=EDGE_LOOP('',(#11696,#11697,#6682,#11700,#11701,#11702));+#11696=ORIENTED_EDGE('',*,*,#6614,.F.);+#11697=ORIENTED_EDGE('',*,*,#11698,.T.);+#11698=EDGE_CURVE('',#6610,#6678,#11699,.T.);+#11699=LINE('',#6554,#780);+#11700=ORIENTED_EDGE('',*,*,#6698,.T.);+#11701=ORIENTED_EDGE('',*,*,#3192,.F.);+#11702=ORIENTED_EDGE('',*,*,#6552,.F.);+#11703=PLANE('',#11704);+#11704=AXIS2_PLACEMENT_3D('',#6554,#3014,#719);+#11705=ADVANCED_FACE('',(#11706),#11715,.F.);+#11706=FACE_BOUND('',#11707,.F.);+#11707=EDGE_LOOP('',(#11708,#11709,#6823,#11712,#11713,#11714));+#11708=ORIENTED_EDGE('',*,*,#6755,.F.);+#11709=ORIENTED_EDGE('',*,*,#11710,.T.);+#11710=EDGE_CURVE('',#6751,#6819,#11711,.T.);+#11711=LINE('',#6695,#780);+#11712=ORIENTED_EDGE('',*,*,#6839,.T.);+#11713=ORIENTED_EDGE('',*,*,#3200,.F.);+#11714=ORIENTED_EDGE('',*,*,#6693,.F.);+#11715=PLANE('',#11716);+#11716=AXIS2_PLACEMENT_3D('',#6695,#3014,#719);+#11717=ADVANCED_FACE('',(#11718),#11727,.F.);+#11718=FACE_BOUND('',#11719,.F.);+#11719=EDGE_LOOP('',(#11720,#11721,#6964,#11724,#11725,#11726));+#11720=ORIENTED_EDGE('',*,*,#6896,.F.);+#11721=ORIENTED_EDGE('',*,*,#11722,.T.);+#11722=EDGE_CURVE('',#6892,#6960,#11723,.T.);+#11723=LINE('',#6836,#780);+#11724=ORIENTED_EDGE('',*,*,#6980,.T.);+#11725=ORIENTED_EDGE('',*,*,#3208,.F.);+#11726=ORIENTED_EDGE('',*,*,#6834,.F.);+#11727=PLANE('',#11728);+#11728=AXIS2_PLACEMENT_3D('',#6836,#3014,#719);+#11729=ADVANCED_FACE('',(#11730),#11739,.F.);+#11730=FACE_BOUND('',#11731,.F.);+#11731=EDGE_LOOP('',(#11732,#11733,#7105,#11736,#11737,#11738));+#11732=ORIENTED_EDGE('',*,*,#7037,.F.);+#11733=ORIENTED_EDGE('',*,*,#11734,.T.);+#11734=EDGE_CURVE('',#7033,#7101,#11735,.T.);+#11735=LINE('',#6977,#780);+#11736=ORIENTED_EDGE('',*,*,#7121,.T.);+#11737=ORIENTED_EDGE('',*,*,#3216,.F.);+#11738=ORIENTED_EDGE('',*,*,#6975,.F.);+#11739=PLANE('',#11740);+#11740=AXIS2_PLACEMENT_3D('',#6977,#3014,#719);+#11741=ADVANCED_FACE('',(#11742),#11751,.F.);+#11742=FACE_BOUND('',#11743,.F.);+#11743=EDGE_LOOP('',(#11744,#11745,#7246,#11748,#11749,#11750));+#11744=ORIENTED_EDGE('',*,*,#7178,.F.);+#11745=ORIENTED_EDGE('',*,*,#11746,.T.);+#11746=EDGE_CURVE('',#7174,#7242,#11747,.T.);+#11747=LINE('',#7118,#780);+#11748=ORIENTED_EDGE('',*,*,#7262,.T.);+#11749=ORIENTED_EDGE('',*,*,#3224,.F.);+#11750=ORIENTED_EDGE('',*,*,#7116,.F.);+#11751=PLANE('',#11752);+#11752=AXIS2_PLACEMENT_3D('',#7118,#3014,#719);+#11753=ADVANCED_FACE('',(#11754),#11763,.F.);+#11754=FACE_BOUND('',#11755,.F.);+#11755=EDGE_LOOP('',(#11756,#11757,#7387,#11760,#11761,#11762));+#11756=ORIENTED_EDGE('',*,*,#7319,.F.);+#11757=ORIENTED_EDGE('',*,*,#11758,.T.);+#11758=EDGE_CURVE('',#7315,#7383,#11759,.T.);+#11759=LINE('',#7259,#780);+#11760=ORIENTED_EDGE('',*,*,#7400,.T.);+#11761=ORIENTED_EDGE('',*,*,#3232,.F.);+#11762=ORIENTED_EDGE('',*,*,#7257,.F.);+#11763=PLANE('',#11764);+#11764=AXIS2_PLACEMENT_3D('',#7259,#3014,#719);+#11765=ADVANCED_FACE('',(#11766,#11786),#11796,.F.);+#11766=FACE_BOUND('',#11767,.F.);+#11767=EDGE_LOOP('',(#11768,#11769,#11770,#11771,#11776,#11781,#11784,#11785));+#11768=ORIENTED_EDGE('',*,*,#3277,.T.);+#11769=ORIENTED_EDGE('',*,*,#3291,.T.);+#11770=ORIENTED_EDGE('',*,*,#3529,.T.);+#11771=ORIENTED_EDGE('',*,*,#11772,.T.);+#11772=EDGE_CURVE('',#3525,#11773,#11775,.T.);+#11773=VERTEX_POINT('',#11774);+#11774=CARTESIAN_POINT('',(2.892488687666,-6.864977375332,1.05));+#11775=LINE('',#3526,#65);+#11776=ORIENTED_EDGE('',*,*,#11777,.T.);+#11777=EDGE_CURVE('',#11773,#11778,#11780,.T.);+#11778=VERTEX_POINT('',#11779);+#11779=CARTESIAN_POINT('',(-2.892488687666,-6.864977375332,1.05));+#11780=LINE('',#11774,#72);+#11781=ORIENTED_EDGE('',*,*,#11782,.T.);+#11782=EDGE_CURVE('',#11778,#3246,#11783,.T.);+#11783=LINE('',#11779,#79);+#11784=ORIENTED_EDGE('',*,*,#3245,.T.);+#11785=ORIENTED_EDGE('',*,*,#3263,.T.);+#11786=FACE_BOUND('',#11787,.F.);+#11787=EDGE_LOOP('',(#11788));+#11788=ORIENTED_EDGE('',*,*,#11789,.F.);+#11789=EDGE_CURVE('',#11790,#11790,#11792,.T.);+#11790=VERTEX_POINT('',#11791);+#11791=CARTESIAN_POINT('',(-2.214977375332,5.914977375332,1.05));+#11792=CIRCLE('',#11793,0.25);+#11793=AXIS2_PLACEMENT_3D('',#11794,#11795,#59);+#11794=CARTESIAN_POINT('',(-2.214977375332,6.164977375332,1.05));+#11795=DIRECTION('',(0.,-0.,-1.));+#11796=PLANE('',#11797);+#11797=AXIS2_PLACEMENT_3D('',#3260,#3014,#11798);+#11798=DIRECTION('',(0.388281830867,-0.921540677246,0.));+#11799=ADVANCED_FACE('',(#11800),#11808,.F.);+#11800=FACE_BOUND('',#11801,.F.);+#11801=EDGE_LOOP('',(#11802,#11803,#11804,#11805));+#11802=ORIENTED_EDGE('',*,*,#3563,.T.);+#11803=ORIENTED_EDGE('',*,*,#3250,.T.);+#11804=ORIENTED_EDGE('',*,*,#11782,.F.);+#11805=ORIENTED_EDGE('',*,*,#11806,.F.);+#11806=EDGE_CURVE('',#3564,#11778,#11807,.T.);+#11807=B_SPLINE_CURVE_WITH_KNOTS('',1,(#3565,#11779),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11808=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#3565,#11779),(#711,#3247)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,9.192388155425E-02),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11809=ADVANCED_FACE('',(#11810),#11819,.F.);+#11810=FACE_BOUND('',#11811,.F.);+#11811=EDGE_LOOP('',(#11812,#11813,#7787,#11816,#11817,#11818));+#11812=ORIENTED_EDGE('',*,*,#7720,.F.);+#11813=ORIENTED_EDGE('',*,*,#11814,.T.);+#11814=EDGE_CURVE('',#7716,#7783,#11815,.T.);+#11815=LINE('',#7662,#58);+#11816=ORIENTED_EDGE('',*,*,#7797,.T.);+#11817=ORIENTED_EDGE('',*,*,#3308,.F.);+#11818=ORIENTED_EDGE('',*,*,#7660,.F.);+#11819=PLANE('',#11820);+#11820=AXIS2_PLACEMENT_3D('',#7662,#3014,#73);+#11821=ADVANCED_FACE('',(#11822),#11831,.F.);+#11822=FACE_BOUND('',#11823,.F.);+#11823=EDGE_LOOP('',(#11824,#11825,#7927,#11828,#11829,#11830));+#11824=ORIENTED_EDGE('',*,*,#7860,.F.);+#11825=ORIENTED_EDGE('',*,*,#11826,.T.);+#11826=EDGE_CURVE('',#7856,#7923,#11827,.T.);+#11827=LINE('',#7802,#58);+#11828=ORIENTED_EDGE('',*,*,#7937,.T.);+#11829=ORIENTED_EDGE('',*,*,#3316,.F.);+#11830=ORIENTED_EDGE('',*,*,#7800,.F.);+#11831=PLANE('',#11832);+#11832=AXIS2_PLACEMENT_3D('',#7802,#3014,#73);+#11833=ADVANCED_FACE('',(#11834),#11843,.F.);+#11834=FACE_BOUND('',#11835,.F.);+#11835=EDGE_LOOP('',(#11836,#11837,#8067,#11840,#11841,#11842));+#11836=ORIENTED_EDGE('',*,*,#8000,.F.);+#11837=ORIENTED_EDGE('',*,*,#11838,.T.);+#11838=EDGE_CURVE('',#7996,#8063,#11839,.T.);+#11839=LINE('',#7942,#58);+#11840=ORIENTED_EDGE('',*,*,#8077,.T.);+#11841=ORIENTED_EDGE('',*,*,#3324,.F.);+#11842=ORIENTED_EDGE('',*,*,#7940,.F.);+#11843=PLANE('',#11844);+#11844=AXIS2_PLACEMENT_3D('',#7942,#3014,#73);+#11845=ADVANCED_FACE('',(#11846),#11855,.F.);+#11846=FACE_BOUND('',#11847,.F.);+#11847=EDGE_LOOP('',(#11848,#11849,#8207,#11852,#11853,#11854));+#11848=ORIENTED_EDGE('',*,*,#8140,.F.);+#11849=ORIENTED_EDGE('',*,*,#11850,.T.);+#11850=EDGE_CURVE('',#8136,#8203,#11851,.T.);+#11851=LINE('',#8082,#58);+#11852=ORIENTED_EDGE('',*,*,#8217,.T.);+#11853=ORIENTED_EDGE('',*,*,#3332,.F.);+#11854=ORIENTED_EDGE('',*,*,#8080,.F.);+#11855=PLANE('',#11856);+#11856=AXIS2_PLACEMENT_3D('',#8082,#3014,#73);+#11857=ADVANCED_FACE('',(#11858),#11867,.F.);+#11858=FACE_BOUND('',#11859,.F.);+#11859=EDGE_LOOP('',(#11860,#11861,#8347,#11864,#11865,#11866));+#11860=ORIENTED_EDGE('',*,*,#8280,.F.);+#11861=ORIENTED_EDGE('',*,*,#11862,.T.);+#11862=EDGE_CURVE('',#8276,#8343,#11863,.T.);+#11863=LINE('',#8222,#58);+#11864=ORIENTED_EDGE('',*,*,#8357,.T.);+#11865=ORIENTED_EDGE('',*,*,#3340,.F.);+#11866=ORIENTED_EDGE('',*,*,#8220,.F.);+#11867=PLANE('',#11868);+#11868=AXIS2_PLACEMENT_3D('',#8222,#3014,#73);+#11869=ADVANCED_FACE('',(#11870),#11879,.F.);+#11870=FACE_BOUND('',#11871,.F.);+#11871=EDGE_LOOP('',(#11872,#11873,#8487,#11876,#11877,#11878));+#11872=ORIENTED_EDGE('',*,*,#8420,.F.);+#11873=ORIENTED_EDGE('',*,*,#11874,.T.);+#11874=EDGE_CURVE('',#8416,#8483,#11875,.T.);+#11875=LINE('',#8362,#58);+#11876=ORIENTED_EDGE('',*,*,#8497,.T.);+#11877=ORIENTED_EDGE('',*,*,#3348,.F.);+#11878=ORIENTED_EDGE('',*,*,#8360,.F.);+#11879=PLANE('',#11880);+#11880=AXIS2_PLACEMENT_3D('',#8362,#3014,#73);+#11881=ADVANCED_FACE('',(#11882),#11891,.F.);+#11882=FACE_BOUND('',#11883,.F.);+#11883=EDGE_LOOP('',(#11884,#11885,#8627,#11888,#11889,#11890));+#11884=ORIENTED_EDGE('',*,*,#8560,.F.);+#11885=ORIENTED_EDGE('',*,*,#11886,.T.);+#11886=EDGE_CURVE('',#8556,#8623,#11887,.T.);+#11887=LINE('',#8502,#58);+#11888=ORIENTED_EDGE('',*,*,#8637,.T.);+#11889=ORIENTED_EDGE('',*,*,#3356,.F.);+#11890=ORIENTED_EDGE('',*,*,#8500,.F.);+#11891=PLANE('',#11892);+#11892=AXIS2_PLACEMENT_3D('',#8502,#3014,#73);+#11893=ADVANCED_FACE('',(#11894),#11903,.F.);+#11894=FACE_BOUND('',#11895,.F.);+#11895=EDGE_LOOP('',(#11896,#11897,#8767,#11900,#11901,#11902));+#11896=ORIENTED_EDGE('',*,*,#8700,.F.);+#11897=ORIENTED_EDGE('',*,*,#11898,.T.);+#11898=EDGE_CURVE('',#8696,#8763,#11899,.T.);+#11899=LINE('',#8642,#58);+#11900=ORIENTED_EDGE('',*,*,#8777,.T.);+#11901=ORIENTED_EDGE('',*,*,#3364,.F.);+#11902=ORIENTED_EDGE('',*,*,#8640,.F.);+#11903=PLANE('',#11904);+#11904=AXIS2_PLACEMENT_3D('',#8642,#3014,#73);+#11905=ADVANCED_FACE('',(#11906),#11915,.F.);+#11906=FACE_BOUND('',#11907,.F.);+#11907=EDGE_LOOP('',(#11908,#11909,#8907,#11912,#11913,#11914));+#11908=ORIENTED_EDGE('',*,*,#8840,.F.);+#11909=ORIENTED_EDGE('',*,*,#11910,.T.);+#11910=EDGE_CURVE('',#8836,#8903,#11911,.T.);+#11911=LINE('',#8782,#58);+#11912=ORIENTED_EDGE('',*,*,#8917,.T.);+#11913=ORIENTED_EDGE('',*,*,#3372,.F.);+#11914=ORIENTED_EDGE('',*,*,#8780,.F.);+#11915=PLANE('',#11916);+#11916=AXIS2_PLACEMENT_3D('',#8782,#3014,#73);+#11917=ADVANCED_FACE('',(#11918),#11927,.F.);+#11918=FACE_BOUND('',#11919,.F.);+#11919=EDGE_LOOP('',(#11920,#11921,#9047,#11924,#11925,#11926));+#11920=ORIENTED_EDGE('',*,*,#8980,.F.);+#11921=ORIENTED_EDGE('',*,*,#11922,.T.);+#11922=EDGE_CURVE('',#8976,#9043,#11923,.T.);+#11923=LINE('',#8922,#58);+#11924=ORIENTED_EDGE('',*,*,#9057,.T.);+#11925=ORIENTED_EDGE('',*,*,#3380,.F.);+#11926=ORIENTED_EDGE('',*,*,#8920,.F.);+#11927=PLANE('',#11928);+#11928=AXIS2_PLACEMENT_3D('',#8922,#3014,#73);+#11929=ADVANCED_FACE('',(#11930),#11939,.F.);+#11930=FACE_BOUND('',#11931,.F.);+#11931=EDGE_LOOP('',(#11932,#11933,#9187,#11936,#11937,#11938));+#11932=ORIENTED_EDGE('',*,*,#9120,.F.);+#11933=ORIENTED_EDGE('',*,*,#11934,.T.);+#11934=EDGE_CURVE('',#9116,#9183,#11935,.T.);+#11935=LINE('',#9062,#58);+#11936=ORIENTED_EDGE('',*,*,#9197,.T.);+#11937=ORIENTED_EDGE('',*,*,#3388,.F.);+#11938=ORIENTED_EDGE('',*,*,#9060,.F.);+#11939=PLANE('',#11940);+#11940=AXIS2_PLACEMENT_3D('',#9062,#3014,#73);+#11941=ADVANCED_FACE('',(#11942),#11951,.F.);+#11942=FACE_BOUND('',#11943,.F.);+#11943=EDGE_LOOP('',(#11944,#11945,#9327,#11948,#11949,#11950));+#11944=ORIENTED_EDGE('',*,*,#9260,.F.);+#11945=ORIENTED_EDGE('',*,*,#11946,.T.);+#11946=EDGE_CURVE('',#9256,#9323,#11947,.T.);+#11947=LINE('',#9202,#58);+#11948=ORIENTED_EDGE('',*,*,#9337,.T.);+#11949=ORIENTED_EDGE('',*,*,#3396,.F.);+#11950=ORIENTED_EDGE('',*,*,#9200,.F.);+#11951=PLANE('',#11952);+#11952=AXIS2_PLACEMENT_3D('',#9202,#3014,#73);+#11953=ADVANCED_FACE('',(#11954),#11963,.F.);+#11954=FACE_BOUND('',#11955,.F.);+#11955=EDGE_LOOP('',(#11956,#11957,#9467,#11960,#11961,#11962));+#11956=ORIENTED_EDGE('',*,*,#9400,.F.);+#11957=ORIENTED_EDGE('',*,*,#11958,.T.);+#11958=EDGE_CURVE('',#9396,#9463,#11959,.T.);+#11959=LINE('',#9342,#58);+#11960=ORIENTED_EDGE('',*,*,#9477,.T.);+#11961=ORIENTED_EDGE('',*,*,#3404,.F.);+#11962=ORIENTED_EDGE('',*,*,#9340,.F.);+#11963=PLANE('',#11964);+#11964=AXIS2_PLACEMENT_3D('',#9342,#3014,#73);+#11965=ADVANCED_FACE('',(#11966),#11975,.F.);+#11966=FACE_BOUND('',#11967,.F.);+#11967=EDGE_LOOP('',(#11968,#11969,#9607,#11972,#11973,#11974));+#11968=ORIENTED_EDGE('',*,*,#9540,.F.);+#11969=ORIENTED_EDGE('',*,*,#11970,.T.);+#11970=EDGE_CURVE('',#9536,#9603,#11971,.T.);+#11971=LINE('',#9482,#58);+#11972=ORIENTED_EDGE('',*,*,#9617,.T.);+#11973=ORIENTED_EDGE('',*,*,#3412,.F.);+#11974=ORIENTED_EDGE('',*,*,#9480,.F.);+#11975=PLANE('',#11976);+#11976=AXIS2_PLACEMENT_3D('',#9482,#3014,#73);+#11977=ADVANCED_FACE('',(#11978),#11987,.F.);+#11978=FACE_BOUND('',#11979,.F.);+#11979=EDGE_LOOP('',(#11980,#11981,#9747,#11984,#11985,#11986));+#11980=ORIENTED_EDGE('',*,*,#9680,.F.);+#11981=ORIENTED_EDGE('',*,*,#11982,.T.);+#11982=EDGE_CURVE('',#9676,#9743,#11983,.T.);+#11983=LINE('',#9622,#58);+#11984=ORIENTED_EDGE('',*,*,#9757,.T.);+#11985=ORIENTED_EDGE('',*,*,#3420,.F.);+#11986=ORIENTED_EDGE('',*,*,#9620,.F.);+#11987=PLANE('',#11988);+#11988=AXIS2_PLACEMENT_3D('',#9622,#3014,#73);+#11989=ADVANCED_FACE('',(#11990),#11999,.F.);+#11990=FACE_BOUND('',#11991,.F.);+#11991=EDGE_LOOP('',(#11992,#11993,#9887,#11996,#11997,#11998));+#11992=ORIENTED_EDGE('',*,*,#9820,.F.);+#11993=ORIENTED_EDGE('',*,*,#11994,.T.);+#11994=EDGE_CURVE('',#9816,#9883,#11995,.T.);+#11995=LINE('',#9762,#58);+#11996=ORIENTED_EDGE('',*,*,#9897,.T.);+#11997=ORIENTED_EDGE('',*,*,#3428,.F.);+#11998=ORIENTED_EDGE('',*,*,#9760,.F.);+#11999=PLANE('',#12000);+#12000=AXIS2_PLACEMENT_3D('',#9762,#3014,#73);+#12001=ADVANCED_FACE('',(#12002),#12011,.F.);+#12002=FACE_BOUND('',#12003,.F.);+#12003=EDGE_LOOP('',(#12004,#12005,#10027,#12008,#12009,#12010));+#12004=ORIENTED_EDGE('',*,*,#9960,.F.);+#12005=ORIENTED_EDGE('',*,*,#12006,.T.);+#12006=EDGE_CURVE('',#9956,#10023,#12007,.T.);+#12007=LINE('',#9902,#58);+#12008=ORIENTED_EDGE('',*,*,#10037,.T.);+#12009=ORIENTED_EDGE('',*,*,#3436,.F.);+#12010=ORIENTED_EDGE('',*,*,#9900,.F.);+#12011=PLANE('',#12012);+#12012=AXIS2_PLACEMENT_3D('',#9902,#3014,#73);+#12013=ADVANCED_FACE('',(#12014),#12023,.F.);+#12014=FACE_BOUND('',#12015,.F.);+#12015=EDGE_LOOP('',(#12016,#12017,#10167,#12020,#12021,#12022));+#12016=ORIENTED_EDGE('',*,*,#10100,.F.);+#12017=ORIENTED_EDGE('',*,*,#12018,.T.);+#12018=EDGE_CURVE('',#10096,#10163,#12019,.T.);+#12019=LINE('',#10042,#58);+#12020=ORIENTED_EDGE('',*,*,#10177,.T.);+#12021=ORIENTED_EDGE('',*,*,#3444,.F.);+#12022=ORIENTED_EDGE('',*,*,#10040,.F.);+#12023=PLANE('',#12024);+#12024=AXIS2_PLACEMENT_3D('',#10042,#3014,#73);+#12025=ADVANCED_FACE('',(#12026),#12035,.F.);+#12026=FACE_BOUND('',#12027,.F.);+#12027=EDGE_LOOP('',(#12028,#12029,#10307,#12032,#12033,#12034));+#12028=ORIENTED_EDGE('',*,*,#10240,.F.);+#12029=ORIENTED_EDGE('',*,*,#12030,.T.);+#12030=EDGE_CURVE('',#10236,#10303,#12031,.T.);+#12031=LINE('',#10182,#58);+#12032=ORIENTED_EDGE('',*,*,#10317,.T.);+#12033=ORIENTED_EDGE('',*,*,#3452,.F.);+#12034=ORIENTED_EDGE('',*,*,#10180,.F.);+#12035=PLANE('',#12036);+#12036=AXIS2_PLACEMENT_3D('',#10182,#3014,#73);+#12037=ADVANCED_FACE('',(#12038),#12047,.F.);+#12038=FACE_BOUND('',#12039,.F.);+#12039=EDGE_LOOP('',(#12040,#12041,#10447,#12044,#12045,#12046));+#12040=ORIENTED_EDGE('',*,*,#10380,.F.);+#12041=ORIENTED_EDGE('',*,*,#12042,.T.);+#12042=EDGE_CURVE('',#10376,#10443,#12043,.T.);+#12043=LINE('',#10322,#58);+#12044=ORIENTED_EDGE('',*,*,#10457,.T.);+#12045=ORIENTED_EDGE('',*,*,#3460,.F.);+#12046=ORIENTED_EDGE('',*,*,#10320,.F.);+#12047=PLANE('',#12048);+#12048=AXIS2_PLACEMENT_3D('',#10322,#3014,#73);+#12049=ADVANCED_FACE('',(#12050),#12059,.F.);+#12050=FACE_BOUND('',#12051,.F.);+#12051=EDGE_LOOP('',(#12052,#12053,#10587,#12056,#12057,#12058));+#12052=ORIENTED_EDGE('',*,*,#10520,.F.);+#12053=ORIENTED_EDGE('',*,*,#12054,.T.);+#12054=EDGE_CURVE('',#10516,#10583,#12055,.T.);+#12055=LINE('',#10462,#58);+#12056=ORIENTED_EDGE('',*,*,#10597,.T.);+#12057=ORIENTED_EDGE('',*,*,#3468,.F.);+#12058=ORIENTED_EDGE('',*,*,#10460,.F.);+#12059=PLANE('',#12060);+#12060=AXIS2_PLACEMENT_3D('',#10462,#3014,#73);+#12061=ADVANCED_FACE('',(#12062),#12071,.F.);+#12062=FACE_BOUND('',#12063,.F.);+#12063=EDGE_LOOP('',(#12064,#12065,#10727,#12068,#12069,#12070));+#12064=ORIENTED_EDGE('',*,*,#10660,.F.);+#12065=ORIENTED_EDGE('',*,*,#12066,.T.);+#12066=EDGE_CURVE('',#10656,#10723,#12067,.T.);+#12067=LINE('',#10602,#58);+#12068=ORIENTED_EDGE('',*,*,#10737,.T.);+#12069=ORIENTED_EDGE('',*,*,#3476,.F.);+#12070=ORIENTED_EDGE('',*,*,#10600,.F.);+#12071=PLANE('',#12072);+#12072=AXIS2_PLACEMENT_3D('',#10602,#3014,#73);+#12073=ADVANCED_FACE('',(#12074),#12083,.F.);+#12074=FACE_BOUND('',#12075,.F.);+#12075=EDGE_LOOP('',(#12076,#12077,#10867,#12080,#12081,#12082));+#12076=ORIENTED_EDGE('',*,*,#10800,.F.);+#12077=ORIENTED_EDGE('',*,*,#12078,.T.);+#12078=EDGE_CURVE('',#10796,#10863,#12079,.T.);+#12079=LINE('',#10742,#58);+#12080=ORIENTED_EDGE('',*,*,#10877,.T.);+#12081=ORIENTED_EDGE('',*,*,#3484,.F.);+#12082=ORIENTED_EDGE('',*,*,#10740,.F.);+#12083=PLANE('',#12084);+#12084=AXIS2_PLACEMENT_3D('',#10742,#3014,#73);+#12085=ADVANCED_FACE('',(#12086),#12095,.F.);+#12086=FACE_BOUND('',#12087,.F.);+#12087=EDGE_LOOP('',(#12088,#12089,#11007,#12092,#12093,#12094));+#12088=ORIENTED_EDGE('',*,*,#10940,.F.);+#12089=ORIENTED_EDGE('',*,*,#12090,.T.);+#12090=EDGE_CURVE('',#10936,#11003,#12091,.T.);+#12091=LINE('',#10882,#58);+#12092=ORIENTED_EDGE('',*,*,#11017,.T.);+#12093=ORIENTED_EDGE('',*,*,#3492,.F.);+#12094=ORIENTED_EDGE('',*,*,#10880,.F.);+#12095=PLANE('',#12096);+#12096=AXIS2_PLACEMENT_3D('',#10882,#3014,#73);+#12097=ADVANCED_FACE('',(#12098),#12107,.F.);+#12098=FACE_BOUND('',#12099,.F.);+#12099=EDGE_LOOP('',(#12100,#12101,#11147,#12104,#12105,#12106));+#12100=ORIENTED_EDGE('',*,*,#11080,.F.);+#12101=ORIENTED_EDGE('',*,*,#12102,.T.);+#12102=EDGE_CURVE('',#11076,#11143,#12103,.T.);+#12103=LINE('',#11022,#58);+#12104=ORIENTED_EDGE('',*,*,#11157,.T.);+#12105=ORIENTED_EDGE('',*,*,#3500,.F.);+#12106=ORIENTED_EDGE('',*,*,#11020,.F.);+#12107=PLANE('',#12108);+#12108=AXIS2_PLACEMENT_3D('',#11022,#3014,#73);+#12109=ADVANCED_FACE('',(#12110),#12119,.F.);+#12110=FACE_BOUND('',#12111,.F.);+#12111=EDGE_LOOP('',(#12112,#12113,#11287,#12116,#12117,#12118));+#12112=ORIENTED_EDGE('',*,*,#11220,.F.);+#12113=ORIENTED_EDGE('',*,*,#12114,.T.);+#12114=EDGE_CURVE('',#11216,#11283,#12115,.T.);+#12115=LINE('',#11162,#58);+#12116=ORIENTED_EDGE('',*,*,#11297,.T.);+#12117=ORIENTED_EDGE('',*,*,#3508,.F.);+#12118=ORIENTED_EDGE('',*,*,#11160,.F.);+#12119=PLANE('',#12120);+#12120=AXIS2_PLACEMENT_3D('',#11162,#3014,#73);+#12121=ADVANCED_FACE('',(#12122),#12131,.F.);+#12122=FACE_BOUND('',#12123,.F.);+#12123=EDGE_LOOP('',(#12124,#12125,#11426,#12128,#12129,#12130));+#12124=ORIENTED_EDGE('',*,*,#11360,.F.);+#12125=ORIENTED_EDGE('',*,*,#12126,.T.);+#12126=EDGE_CURVE('',#11356,#11423,#12127,.T.);+#12127=LINE('',#11302,#58);+#12128=ORIENTED_EDGE('',*,*,#3577,.T.);+#12129=ORIENTED_EDGE('',*,*,#3516,.F.);+#12130=ORIENTED_EDGE('',*,*,#11300,.F.);+#12131=PLANE('',#12132);+#12132=AXIS2_PLACEMENT_3D('',#11302,#3014,#73);+#12133=ADVANCED_FACE('',(#12134),#12142,.F.);+#12134=FACE_BOUND('',#12135,.F.);+#12135=EDGE_LOOP('',(#12136,#12137,#12140,#12141));+#12136=ORIENTED_EDGE('',*,*,#3573,.T.);+#12137=ORIENTED_EDGE('',*,*,#12138,.T.);+#12138=EDGE_CURVE('',#3569,#11773,#12139,.T.);+#12139=B_SPLINE_CURVE_WITH_KNOTS('',1,(#3570,#11774),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12140=ORIENTED_EDGE('',*,*,#11772,.F.);+#12141=ORIENTED_EDGE('',*,*,#3524,.F.);+#12142=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#3522,#3526),(#3570,#11774)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,9.192388155425E-02),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12143=ADVANCED_FACE('',(#12144),#12151,.T.);+#12144=FACE_BOUND('',#12145,.F.);+#12145=EDGE_LOOP('',(#12146,#7647,#12149,#12150));+#12146=ORIENTED_EDGE('',*,*,#12147,.T.);+#12147=EDGE_CURVE('',#7576,#7644,#12148,.T.);+#12148=LINE('',#7577,#58);+#12149=ORIENTED_EDGE('',*,*,#3540,.F.);+#12150=ORIENTED_EDGE('',*,*,#7582,.F.);+#12151=CYLINDRICAL_SURFACE('',#12152,0.25);+#12152=AXIS2_PLACEMENT_3D('',#7535,#87,#7585);+#12153=ADVANCED_FACE('',(#12154),#12160,.F.);+#12154=FACE_BOUND('',#12155,.F.);+#12155=EDGE_LOOP('',(#12156,#12157,#12158,#12159));+#12156=ORIENTED_EDGE('',*,*,#3568,.T.);+#12157=ORIENTED_EDGE('',*,*,#11806,.T.);+#12158=ORIENTED_EDGE('',*,*,#11777,.F.);+#12159=ORIENTED_EDGE('',*,*,#12138,.F.);+#12160=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#3570,#11774),(#3565,#11779)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,5.87),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12161=ADVANCED_FACE('',(#12162),#12169,.T.);+#12162=FACE_BOUND('',#12163,.F.);+#12163=EDGE_LOOP('',(#12164,#3715,#12167,#12168));+#12164=ORIENTED_EDGE('',*,*,#12165,.T.);+#12165=EDGE_CURVE('',#3639,#3712,#12166,.T.);+#12166=LINE('',#3640,#780);+#12167=ORIENTED_EDGE('',*,*,#11446,.F.);+#12168=ORIENTED_EDGE('',*,*,#3645,.F.);+#12169=CYLINDRICAL_SURFACE('',#12170,0.25);+#12170=AXIS2_PLACEMENT_3D('',#3595,#3673,#3650);+#12171=ADVANCED_FACE('',(#12172),#12179,.F.);+#12172=FACE_BOUND('',#12173,.F.);+#12173=EDGE_LOOP('',(#12174,#3710,#12177,#12178));+#12174=ORIENTED_EDGE('',*,*,#12175,.T.);+#12175=EDGE_CURVE('',#3631,#3706,#12176,.T.);+#12176=LINE('',#3632,#780);+#12177=ORIENTED_EDGE('',*,*,#12165,.F.);+#12178=ORIENTED_EDGE('',*,*,#3638,.F.);+#12179=PLANE('',#12180);+#12180=AXIS2_PLACEMENT_3D('',#3632,#12181,#3643);+#12181=DIRECTION('',(0.988833015595,-1.131460060166E-17,-0.14902773993));+#12182=ADVANCED_FACE('',(#12183),#12190,.F.);+#12183=FACE_BOUND('',#12184,.F.);+#12184=EDGE_LOOP('',(#12185,#3704,#12188,#12189));+#12185=ORIENTED_EDGE('',*,*,#12186,.T.);+#12186=EDGE_CURVE('',#3626,#3701,#12187,.T.);+#12187=LINE('',#3627,#780);+#12188=ORIENTED_EDGE('',*,*,#12175,.F.);+#12189=ORIENTED_EDGE('',*,*,#3630,.F.);+#12190=CYLINDRICAL_SURFACE('',#12191,0.1);+#12191=AXIS2_PLACEMENT_3D('',#3611,#3673,#3636);+#12192=ADVANCED_FACE('',(#12193),#12200,.F.);+#12193=FACE_BOUND('',#12194,.F.);+#12194=EDGE_LOOP('',(#12195,#3699,#12198,#12199));+#12195=ORIENTED_EDGE('',*,*,#12196,.T.);+#12196=EDGE_CURVE('',#3621,#3696,#12197,.T.);+#12197=LINE('',#3622,#780);+#12198=ORIENTED_EDGE('',*,*,#12186,.F.);+#12199=ORIENTED_EDGE('',*,*,#3625,.F.);+#12200=PLANE('',#12201);+#12201=AXIS2_PLACEMENT_3D('',#3622,#3014,#719);+#12202=ADVANCED_FACE('',(#12203),#12210,.F.);+#12203=FACE_BOUND('',#12204,.F.);+#12204=EDGE_LOOP('',(#12205,#3694,#12208,#12209));+#12205=ORIENTED_EDGE('',*,*,#12206,.T.);+#12206=EDGE_CURVE('',#3616,#3691,#12207,.T.);+#12207=LINE('',#3617,#780);+#12208=ORIENTED_EDGE('',*,*,#12196,.F.);+#12209=ORIENTED_EDGE('',*,*,#3620,.F.);+#12210=PLANE('',#12211);+#12211=AXIS2_PLACEMENT_3D('',#3617,#719,#13);+#12212=ADVANCED_FACE('',(#12213),#12220,.F.);+#12213=FACE_BOUND('',#12214,.F.);+#12214=EDGE_LOOP('',(#12215,#3689,#12218,#12219));+#12215=ORIENTED_EDGE('',*,*,#12216,.T.);+#12216=EDGE_CURVE('',#3607,#3684,#12217,.T.);+#12217=LINE('',#3608,#780);+#12218=ORIENTED_EDGE('',*,*,#12206,.F.);+#12219=ORIENTED_EDGE('',*,*,#3615,.F.);+#12220=PLANE('',#12221);+#12221=AXIS2_PLACEMENT_3D('',#3608,#13,#769);+#12222=ADVANCED_FACE('',(#12223),#12230,.T.);+#12223=FACE_BOUND('',#12224,.F.);+#12224=EDGE_LOOP('',(#12225,#3682,#12228,#12229));+#12225=ORIENTED_EDGE('',*,*,#12226,.T.);+#12226=EDGE_CURVE('',#3600,#3679,#12227,.T.);+#12227=LINE('',#3601,#780);+#12228=ORIENTED_EDGE('',*,*,#12216,.F.);+#12229=ORIENTED_EDGE('',*,*,#3606,.F.);+#12230=CYLINDRICAL_SURFACE('',#12231,0.25);+#12231=AXIS2_PLACEMENT_3D('',#3611,#3673,#3613);+#12232=ADVANCED_FACE('',(#12233),#12238,.F.);+#12233=FACE_BOUND('',#12234,.F.);+#12234=EDGE_LOOP('',(#12235,#3677,#12236,#12237));+#12235=ORIENTED_EDGE('',*,*,#3668,.T.);+#12236=ORIENTED_EDGE('',*,*,#12226,.F.);+#12237=ORIENTED_EDGE('',*,*,#3599,.F.);+#12238=PLANE('',#12239);+#12239=AXIS2_PLACEMENT_3D('',#3592,#12240,#3604);+#12240=DIRECTION('',(-0.988833015595,1.131460060166E-17,0.14902773993));+#12241=ADVANCED_FACE('',(#12242),#12249,.T.);+#12242=FACE_BOUND('',#12243,.F.);+#12243=EDGE_LOOP('',(#12244,#3856,#12247,#12248));+#12244=ORIENTED_EDGE('',*,*,#12245,.T.);+#12245=EDGE_CURVE('',#3785,#3853,#12246,.T.);+#12246=LINE('',#3786,#780);+#12247=ORIENTED_EDGE('',*,*,#11458,.F.);+#12248=ORIENTED_EDGE('',*,*,#3789,.F.);+#12249=CYLINDRICAL_SURFACE('',#12250,0.25);+#12250=AXIS2_PLACEMENT_3D('',#3749,#3673,#3650);+#12251=ADVANCED_FACE('',(#12252),#12259,.F.);+#12252=FACE_BOUND('',#12253,.F.);+#12253=EDGE_LOOP('',(#12254,#3851,#12257,#12258));+#12254=ORIENTED_EDGE('',*,*,#12255,.T.);+#12255=EDGE_CURVE('',#3779,#3847,#12256,.T.);+#12256=LINE('',#3780,#780);+#12257=ORIENTED_EDGE('',*,*,#12245,.F.);+#12258=ORIENTED_EDGE('',*,*,#3784,.F.);+#12259=PLANE('',#12260);+#12260=AXIS2_PLACEMENT_3D('',#3780,#12181,#3643);+#12261=ADVANCED_FACE('',(#12262),#12269,.F.);+#12262=FACE_BOUND('',#12263,.F.);+#12263=EDGE_LOOP('',(#12264,#3845,#12267,#12268));+#12264=ORIENTED_EDGE('',*,*,#12265,.T.);+#12265=EDGE_CURVE('',#3774,#3842,#12266,.T.);+#12266=LINE('',#3775,#780);+#12267=ORIENTED_EDGE('',*,*,#12255,.F.);+#12268=ORIENTED_EDGE('',*,*,#3778,.F.);+#12269=CYLINDRICAL_SURFACE('',#12270,0.1);+#12270=AXIS2_PLACEMENT_3D('',#3761,#3673,#3636);+#12271=ADVANCED_FACE('',(#12272),#12279,.F.);+#12272=FACE_BOUND('',#12273,.F.);+#12273=EDGE_LOOP('',(#12274,#3840,#12277,#12278));+#12274=ORIENTED_EDGE('',*,*,#12275,.T.);+#12275=EDGE_CURVE('',#3769,#3837,#12276,.T.);+#12276=LINE('',#3770,#780);+#12277=ORIENTED_EDGE('',*,*,#12265,.F.);+#12278=ORIENTED_EDGE('',*,*,#3773,.F.);+#12279=PLANE('',#12280);+#12280=AXIS2_PLACEMENT_3D('',#3770,#3014,#719);+#12281=ADVANCED_FACE('',(#12282),#12289,.F.);+#12282=FACE_BOUND('',#12283,.F.);+#12283=EDGE_LOOP('',(#12284,#3835,#12287,#12288));+#12284=ORIENTED_EDGE('',*,*,#12285,.T.);+#12285=EDGE_CURVE('',#3764,#3832,#12286,.T.);+#12286=LINE('',#3765,#780);+#12287=ORIENTED_EDGE('',*,*,#12275,.F.);+#12288=ORIENTED_EDGE('',*,*,#3768,.F.);+#12289=PLANE('',#12290);+#12290=AXIS2_PLACEMENT_3D('',#3765,#719,#13);+#12291=ADVANCED_FACE('',(#12292),#12299,.F.);+#12292=FACE_BOUND('',#12293,.F.);+#12293=EDGE_LOOP('',(#12294,#3830,#12297,#12298));+#12294=ORIENTED_EDGE('',*,*,#12295,.T.);+#12295=EDGE_CURVE('',#3757,#3825,#12296,.T.);+#12296=LINE('',#3758,#780);+#12297=ORIENTED_EDGE('',*,*,#12285,.F.);+#12298=ORIENTED_EDGE('',*,*,#3763,.F.);+#12299=PLANE('',#12300);+#12300=AXIS2_PLACEMENT_3D('',#3758,#13,#769);+#12301=ADVANCED_FACE('',(#12302),#12309,.T.);+#12302=FACE_BOUND('',#12303,.F.);+#12303=EDGE_LOOP('',(#12304,#3823,#12307,#12308));+#12304=ORIENTED_EDGE('',*,*,#12305,.T.);+#12305=EDGE_CURVE('',#3752,#3820,#12306,.T.);+#12306=LINE('',#3753,#780);+#12307=ORIENTED_EDGE('',*,*,#12295,.F.);+#12308=ORIENTED_EDGE('',*,*,#3756,.F.);+#12309=CYLINDRICAL_SURFACE('',#12310,0.25);+#12310=AXIS2_PLACEMENT_3D('',#3761,#3673,#3613);+#12311=ADVANCED_FACE('',(#12312),#12317,.F.);+#12312=FACE_BOUND('',#12313,.F.);+#12313=EDGE_LOOP('',(#12314,#3818,#12315,#12316));+#12314=ORIENTED_EDGE('',*,*,#3810,.T.);+#12315=ORIENTED_EDGE('',*,*,#12305,.F.);+#12316=ORIENTED_EDGE('',*,*,#3751,.F.);+#12317=PLANE('',#12318);+#12318=AXIS2_PLACEMENT_3D('',#3746,#12240,#3604);+#12319=ADVANCED_FACE('',(#12320),#12327,.T.);+#12320=FACE_BOUND('',#12321,.F.);+#12321=EDGE_LOOP('',(#12322,#3997,#12325,#12326));+#12322=ORIENTED_EDGE('',*,*,#12323,.T.);+#12323=EDGE_CURVE('',#3926,#3994,#12324,.T.);+#12324=LINE('',#3927,#780);+#12325=ORIENTED_EDGE('',*,*,#11470,.F.);+#12326=ORIENTED_EDGE('',*,*,#3930,.F.);+#12327=CYLINDRICAL_SURFACE('',#12328,0.25);+#12328=AXIS2_PLACEMENT_3D('',#3890,#3673,#3650);+#12329=ADVANCED_FACE('',(#12330),#12337,.F.);+#12330=FACE_BOUND('',#12331,.F.);+#12331=EDGE_LOOP('',(#12332,#3992,#12335,#12336));+#12332=ORIENTED_EDGE('',*,*,#12333,.T.);+#12333=EDGE_CURVE('',#3920,#3988,#12334,.T.);+#12334=LINE('',#3921,#780);+#12335=ORIENTED_EDGE('',*,*,#12323,.F.);+#12336=ORIENTED_EDGE('',*,*,#3925,.F.);+#12337=PLANE('',#12338);+#12338=AXIS2_PLACEMENT_3D('',#3921,#12181,#3643);+#12339=ADVANCED_FACE('',(#12340),#12347,.F.);+#12340=FACE_BOUND('',#12341,.F.);+#12341=EDGE_LOOP('',(#12342,#3986,#12345,#12346));+#12342=ORIENTED_EDGE('',*,*,#12343,.T.);+#12343=EDGE_CURVE('',#3915,#3983,#12344,.T.);+#12344=LINE('',#3916,#780);+#12345=ORIENTED_EDGE('',*,*,#12333,.F.);+#12346=ORIENTED_EDGE('',*,*,#3919,.F.);+#12347=CYLINDRICAL_SURFACE('',#12348,0.1);+#12348=AXIS2_PLACEMENT_3D('',#3902,#3673,#3636);+#12349=ADVANCED_FACE('',(#12350),#12357,.F.);+#12350=FACE_BOUND('',#12351,.F.);+#12351=EDGE_LOOP('',(#12352,#3981,#12355,#12356));+#12352=ORIENTED_EDGE('',*,*,#12353,.T.);+#12353=EDGE_CURVE('',#3910,#3978,#12354,.T.);+#12354=LINE('',#3911,#780);+#12355=ORIENTED_EDGE('',*,*,#12343,.F.);+#12356=ORIENTED_EDGE('',*,*,#3914,.F.);+#12357=PLANE('',#12358);+#12358=AXIS2_PLACEMENT_3D('',#3911,#3014,#719);+#12359=ADVANCED_FACE('',(#12360),#12367,.F.);+#12360=FACE_BOUND('',#12361,.F.);+#12361=EDGE_LOOP('',(#12362,#3976,#12365,#12366));+#12362=ORIENTED_EDGE('',*,*,#12363,.T.);+#12363=EDGE_CURVE('',#3905,#3973,#12364,.T.);+#12364=LINE('',#3906,#780);+#12365=ORIENTED_EDGE('',*,*,#12353,.F.);+#12366=ORIENTED_EDGE('',*,*,#3909,.F.);+#12367=PLANE('',#12368);+#12368=AXIS2_PLACEMENT_3D('',#3906,#719,#13);+#12369=ADVANCED_FACE('',(#12370),#12377,.F.);+#12370=FACE_BOUND('',#12371,.F.);+#12371=EDGE_LOOP('',(#12372,#3971,#12375,#12376));+#12372=ORIENTED_EDGE('',*,*,#12373,.T.);+#12373=EDGE_CURVE('',#3898,#3966,#12374,.T.);+#12374=LINE('',#3899,#780);+#12375=ORIENTED_EDGE('',*,*,#12363,.F.);+#12376=ORIENTED_EDGE('',*,*,#3904,.F.);+#12377=PLANE('',#12378);+#12378=AXIS2_PLACEMENT_3D('',#3899,#13,#769);+#12379=ADVANCED_FACE('',(#12380),#12387,.T.);+#12380=FACE_BOUND('',#12381,.F.);+#12381=EDGE_LOOP('',(#12382,#3964,#12385,#12386));+#12382=ORIENTED_EDGE('',*,*,#12383,.T.);+#12383=EDGE_CURVE('',#3893,#3961,#12384,.T.);+#12384=LINE('',#3894,#780);+#12385=ORIENTED_EDGE('',*,*,#12373,.F.);+#12386=ORIENTED_EDGE('',*,*,#3897,.F.);+#12387=CYLINDRICAL_SURFACE('',#12388,0.25);+#12388=AXIS2_PLACEMENT_3D('',#3902,#3673,#3613);+#12389=ADVANCED_FACE('',(#12390),#12395,.F.);+#12390=FACE_BOUND('',#12391,.F.);+#12391=EDGE_LOOP('',(#12392,#3959,#12393,#12394));+#12392=ORIENTED_EDGE('',*,*,#3951,.T.);+#12393=ORIENTED_EDGE('',*,*,#12383,.F.);+#12394=ORIENTED_EDGE('',*,*,#3892,.F.);+#12395=PLANE('',#12396);+#12396=AXIS2_PLACEMENT_3D('',#3887,#12240,#3604);+#12397=ADVANCED_FACE('',(#12398),#12405,.T.);+#12398=FACE_BOUND('',#12399,.F.);+#12399=EDGE_LOOP('',(#12400,#4138,#12403,#12404));+#12400=ORIENTED_EDGE('',*,*,#12401,.T.);+#12401=EDGE_CURVE('',#4067,#4135,#12402,.T.);+#12402=LINE('',#4068,#780);+#12403=ORIENTED_EDGE('',*,*,#11482,.F.);+#12404=ORIENTED_EDGE('',*,*,#4071,.F.);+#12405=CYLINDRICAL_SURFACE('',#12406,0.25);+#12406=AXIS2_PLACEMENT_3D('',#4031,#3673,#3650);+#12407=ADVANCED_FACE('',(#12408),#12415,.F.);+#12408=FACE_BOUND('',#12409,.F.);+#12409=EDGE_LOOP('',(#12410,#4133,#12413,#12414));+#12410=ORIENTED_EDGE('',*,*,#12411,.T.);+#12411=EDGE_CURVE('',#4061,#4129,#12412,.T.);+#12412=LINE('',#4062,#780);+#12413=ORIENTED_EDGE('',*,*,#12401,.F.);+#12414=ORIENTED_EDGE('',*,*,#4066,.F.);+#12415=PLANE('',#12416);+#12416=AXIS2_PLACEMENT_3D('',#4062,#12181,#3643);+#12417=ADVANCED_FACE('',(#12418),#12425,.F.);+#12418=FACE_BOUND('',#12419,.F.);+#12419=EDGE_LOOP('',(#12420,#4127,#12423,#12424));+#12420=ORIENTED_EDGE('',*,*,#12421,.T.);+#12421=EDGE_CURVE('',#4056,#4124,#12422,.T.);+#12422=LINE('',#4057,#780);+#12423=ORIENTED_EDGE('',*,*,#12411,.F.);+#12424=ORIENTED_EDGE('',*,*,#4060,.F.);+#12425=CYLINDRICAL_SURFACE('',#12426,0.1);+#12426=AXIS2_PLACEMENT_3D('',#4043,#3673,#3636);+#12427=ADVANCED_FACE('',(#12428),#12435,.F.);+#12428=FACE_BOUND('',#12429,.F.);+#12429=EDGE_LOOP('',(#12430,#4122,#12433,#12434));+#12430=ORIENTED_EDGE('',*,*,#12431,.T.);+#12431=EDGE_CURVE('',#4051,#4119,#12432,.T.);+#12432=LINE('',#4052,#780);+#12433=ORIENTED_EDGE('',*,*,#12421,.F.);+#12434=ORIENTED_EDGE('',*,*,#4055,.F.);+#12435=PLANE('',#12436);+#12436=AXIS2_PLACEMENT_3D('',#4052,#3014,#719);+#12437=ADVANCED_FACE('',(#12438),#12445,.F.);+#12438=FACE_BOUND('',#12439,.F.);+#12439=EDGE_LOOP('',(#12440,#4117,#12443,#12444));+#12440=ORIENTED_EDGE('',*,*,#12441,.T.);+#12441=EDGE_CURVE('',#4046,#4114,#12442,.T.);+#12442=LINE('',#4047,#780);+#12443=ORIENTED_EDGE('',*,*,#12431,.F.);+#12444=ORIENTED_EDGE('',*,*,#4050,.F.);+#12445=PLANE('',#12446);+#12446=AXIS2_PLACEMENT_3D('',#4047,#719,#13);+#12447=ADVANCED_FACE('',(#12448),#12455,.F.);+#12448=FACE_BOUND('',#12449,.F.);+#12449=EDGE_LOOP('',(#12450,#4112,#12453,#12454));+#12450=ORIENTED_EDGE('',*,*,#12451,.T.);+#12451=EDGE_CURVE('',#4039,#4107,#12452,.T.);+#12452=LINE('',#4040,#780);+#12453=ORIENTED_EDGE('',*,*,#12441,.F.);+#12454=ORIENTED_EDGE('',*,*,#4045,.F.);+#12455=PLANE('',#12456);+#12456=AXIS2_PLACEMENT_3D('',#4040,#13,#769);+#12457=ADVANCED_FACE('',(#12458),#12465,.T.);+#12458=FACE_BOUND('',#12459,.F.);+#12459=EDGE_LOOP('',(#12460,#4105,#12463,#12464));+#12460=ORIENTED_EDGE('',*,*,#12461,.T.);+#12461=EDGE_CURVE('',#4034,#4102,#12462,.T.);+#12462=LINE('',#4035,#780);+#12463=ORIENTED_EDGE('',*,*,#12451,.F.);+#12464=ORIENTED_EDGE('',*,*,#4038,.F.);+#12465=CYLINDRICAL_SURFACE('',#12466,0.25);+#12466=AXIS2_PLACEMENT_3D('',#4043,#3673,#3613);+#12467=ADVANCED_FACE('',(#12468),#12473,.F.);+#12468=FACE_BOUND('',#12469,.F.);+#12469=EDGE_LOOP('',(#12470,#4100,#12471,#12472));+#12470=ORIENTED_EDGE('',*,*,#4092,.T.);+#12471=ORIENTED_EDGE('',*,*,#12461,.F.);+#12472=ORIENTED_EDGE('',*,*,#4033,.F.);+#12473=PLANE('',#12474);+#12474=AXIS2_PLACEMENT_3D('',#4028,#12240,#3604);+#12475=ADVANCED_FACE('',(#12476),#12483,.T.);+#12476=FACE_BOUND('',#12477,.F.);+#12477=EDGE_LOOP('',(#12478,#4279,#12481,#12482));+#12478=ORIENTED_EDGE('',*,*,#12479,.T.);+#12479=EDGE_CURVE('',#4208,#4276,#12480,.T.);+#12480=LINE('',#4209,#780);+#12481=ORIENTED_EDGE('',*,*,#11494,.F.);+#12482=ORIENTED_EDGE('',*,*,#4212,.F.);+#12483=CYLINDRICAL_SURFACE('',#12484,0.25);+#12484=AXIS2_PLACEMENT_3D('',#4172,#3673,#3650);+#12485=ADVANCED_FACE('',(#12486),#12493,.F.);+#12486=FACE_BOUND('',#12487,.F.);+#12487=EDGE_LOOP('',(#12488,#4274,#12491,#12492));+#12488=ORIENTED_EDGE('',*,*,#12489,.T.);+#12489=EDGE_CURVE('',#4202,#4270,#12490,.T.);+#12490=LINE('',#4203,#780);+#12491=ORIENTED_EDGE('',*,*,#12479,.F.);+#12492=ORIENTED_EDGE('',*,*,#4207,.F.);+#12493=PLANE('',#12494);+#12494=AXIS2_PLACEMENT_3D('',#4203,#12181,#3643);+#12495=ADVANCED_FACE('',(#12496),#12503,.F.);+#12496=FACE_BOUND('',#12497,.F.);+#12497=EDGE_LOOP('',(#12498,#4268,#12501,#12502));+#12498=ORIENTED_EDGE('',*,*,#12499,.T.);+#12499=EDGE_CURVE('',#4197,#4265,#12500,.T.);+#12500=LINE('',#4198,#780);+#12501=ORIENTED_EDGE('',*,*,#12489,.F.);+#12502=ORIENTED_EDGE('',*,*,#4201,.F.);+#12503=CYLINDRICAL_SURFACE('',#12504,0.1);+#12504=AXIS2_PLACEMENT_3D('',#4184,#3673,#3636);+#12505=ADVANCED_FACE('',(#12506),#12513,.F.);+#12506=FACE_BOUND('',#12507,.F.);+#12507=EDGE_LOOP('',(#12508,#4263,#12511,#12512));+#12508=ORIENTED_EDGE('',*,*,#12509,.T.);+#12509=EDGE_CURVE('',#4192,#4260,#12510,.T.);+#12510=LINE('',#4193,#780);+#12511=ORIENTED_EDGE('',*,*,#12499,.F.);+#12512=ORIENTED_EDGE('',*,*,#4196,.F.);+#12513=PLANE('',#12514);+#12514=AXIS2_PLACEMENT_3D('',#4193,#3014,#719);+#12515=ADVANCED_FACE('',(#12516),#12523,.F.);+#12516=FACE_BOUND('',#12517,.F.);+#12517=EDGE_LOOP('',(#12518,#4258,#12521,#12522));+#12518=ORIENTED_EDGE('',*,*,#12519,.T.);+#12519=EDGE_CURVE('',#4187,#4255,#12520,.T.);+#12520=LINE('',#4188,#780);+#12521=ORIENTED_EDGE('',*,*,#12509,.F.);+#12522=ORIENTED_EDGE('',*,*,#4191,.F.);+#12523=PLANE('',#12524);+#12524=AXIS2_PLACEMENT_3D('',#4188,#719,#13);+#12525=ADVANCED_FACE('',(#12526),#12533,.F.);+#12526=FACE_BOUND('',#12527,.F.);+#12527=EDGE_LOOP('',(#12528,#4253,#12531,#12532));+#12528=ORIENTED_EDGE('',*,*,#12529,.T.);+#12529=EDGE_CURVE('',#4180,#4248,#12530,.T.);+#12530=LINE('',#4181,#780);+#12531=ORIENTED_EDGE('',*,*,#12519,.F.);+#12532=ORIENTED_EDGE('',*,*,#4186,.F.);+#12533=PLANE('',#12534);+#12534=AXIS2_PLACEMENT_3D('',#4181,#13,#769);+#12535=ADVANCED_FACE('',(#12536),#12543,.T.);+#12536=FACE_BOUND('',#12537,.F.);+#12537=EDGE_LOOP('',(#12538,#4246,#12541,#12542));+#12538=ORIENTED_EDGE('',*,*,#12539,.T.);+#12539=EDGE_CURVE('',#4175,#4243,#12540,.T.);+#12540=LINE('',#4176,#780);+#12541=ORIENTED_EDGE('',*,*,#12529,.F.);+#12542=ORIENTED_EDGE('',*,*,#4179,.F.);+#12543=CYLINDRICAL_SURFACE('',#12544,0.25);+#12544=AXIS2_PLACEMENT_3D('',#4184,#3673,#3613);+#12545=ADVANCED_FACE('',(#12546),#12551,.F.);+#12546=FACE_BOUND('',#12547,.F.);+#12547=EDGE_LOOP('',(#12548,#4241,#12549,#12550));+#12548=ORIENTED_EDGE('',*,*,#4233,.T.);+#12549=ORIENTED_EDGE('',*,*,#12539,.F.);+#12550=ORIENTED_EDGE('',*,*,#4174,.F.);+#12551=PLANE('',#12552);+#12552=AXIS2_PLACEMENT_3D('',#4169,#12240,#3604);+#12553=ADVANCED_FACE('',(#12554),#12561,.T.);+#12554=FACE_BOUND('',#12555,.F.);+#12555=EDGE_LOOP('',(#12556,#4420,#12559,#12560));+#12556=ORIENTED_EDGE('',*,*,#12557,.T.);+#12557=EDGE_CURVE('',#4349,#4417,#12558,.T.);+#12558=LINE('',#4350,#780);+#12559=ORIENTED_EDGE('',*,*,#11506,.F.);+#12560=ORIENTED_EDGE('',*,*,#4353,.F.);+#12561=CYLINDRICAL_SURFACE('',#12562,0.25);+#12562=AXIS2_PLACEMENT_3D('',#4313,#3673,#3650);+#12563=ADVANCED_FACE('',(#12564),#12571,.F.);+#12564=FACE_BOUND('',#12565,.F.);+#12565=EDGE_LOOP('',(#12566,#4415,#12569,#12570));+#12566=ORIENTED_EDGE('',*,*,#12567,.T.);+#12567=EDGE_CURVE('',#4343,#4411,#12568,.T.);+#12568=LINE('',#4344,#780);+#12569=ORIENTED_EDGE('',*,*,#12557,.F.);+#12570=ORIENTED_EDGE('',*,*,#4348,.F.);+#12571=PLANE('',#12572);+#12572=AXIS2_PLACEMENT_3D('',#4344,#12181,#3643);+#12573=ADVANCED_FACE('',(#12574),#12581,.F.);+#12574=FACE_BOUND('',#12575,.F.);+#12575=EDGE_LOOP('',(#12576,#4409,#12579,#12580));+#12576=ORIENTED_EDGE('',*,*,#12577,.T.);+#12577=EDGE_CURVE('',#4338,#4406,#12578,.T.);+#12578=LINE('',#4339,#780);+#12579=ORIENTED_EDGE('',*,*,#12567,.F.);+#12580=ORIENTED_EDGE('',*,*,#4342,.F.);+#12581=CYLINDRICAL_SURFACE('',#12582,0.1);+#12582=AXIS2_PLACEMENT_3D('',#4325,#3673,#3636);+#12583=ADVANCED_FACE('',(#12584),#12591,.F.);+#12584=FACE_BOUND('',#12585,.F.);+#12585=EDGE_LOOP('',(#12586,#4404,#12589,#12590));+#12586=ORIENTED_EDGE('',*,*,#12587,.T.);+#12587=EDGE_CURVE('',#4333,#4401,#12588,.T.);+#12588=LINE('',#4334,#780);+#12589=ORIENTED_EDGE('',*,*,#12577,.F.);+#12590=ORIENTED_EDGE('',*,*,#4337,.F.);+#12591=PLANE('',#12592);+#12592=AXIS2_PLACEMENT_3D('',#4334,#3014,#719);+#12593=ADVANCED_FACE('',(#12594),#12601,.F.);+#12594=FACE_BOUND('',#12595,.F.);+#12595=EDGE_LOOP('',(#12596,#4399,#12599,#12600));+#12596=ORIENTED_EDGE('',*,*,#12597,.T.);+#12597=EDGE_CURVE('',#4328,#4396,#12598,.T.);+#12598=LINE('',#4329,#780);+#12599=ORIENTED_EDGE('',*,*,#12587,.F.);+#12600=ORIENTED_EDGE('',*,*,#4332,.F.);+#12601=PLANE('',#12602);+#12602=AXIS2_PLACEMENT_3D('',#4329,#719,#13);+#12603=ADVANCED_FACE('',(#12604),#12611,.F.);+#12604=FACE_BOUND('',#12605,.F.);+#12605=EDGE_LOOP('',(#12606,#4394,#12609,#12610));+#12606=ORIENTED_EDGE('',*,*,#12607,.T.);+#12607=EDGE_CURVE('',#4321,#4389,#12608,.T.);+#12608=LINE('',#4322,#780);+#12609=ORIENTED_EDGE('',*,*,#12597,.F.);+#12610=ORIENTED_EDGE('',*,*,#4327,.F.);+#12611=PLANE('',#12612);+#12612=AXIS2_PLACEMENT_3D('',#4322,#13,#769);+#12613=ADVANCED_FACE('',(#12614),#12621,.T.);+#12614=FACE_BOUND('',#12615,.F.);+#12615=EDGE_LOOP('',(#12616,#4387,#12619,#12620));+#12616=ORIENTED_EDGE('',*,*,#12617,.T.);+#12617=EDGE_CURVE('',#4316,#4384,#12618,.T.);+#12618=LINE('',#4317,#780);+#12619=ORIENTED_EDGE('',*,*,#12607,.F.);+#12620=ORIENTED_EDGE('',*,*,#4320,.F.);+#12621=CYLINDRICAL_SURFACE('',#12622,0.25);+#12622=AXIS2_PLACEMENT_3D('',#4325,#3673,#3613);+#12623=ADVANCED_FACE('',(#12624),#12629,.F.);+#12624=FACE_BOUND('',#12625,.F.);+#12625=EDGE_LOOP('',(#12626,#4382,#12627,#12628));+#12626=ORIENTED_EDGE('',*,*,#4374,.T.);+#12627=ORIENTED_EDGE('',*,*,#12617,.F.);+#12628=ORIENTED_EDGE('',*,*,#4315,.F.);+#12629=PLANE('',#12630);+#12630=AXIS2_PLACEMENT_3D('',#4310,#12240,#3604);+#12631=ADVANCED_FACE('',(#12632),#12639,.T.);+#12632=FACE_BOUND('',#12633,.F.);+#12633=EDGE_LOOP('',(#12634,#4561,#12637,#12638));+#12634=ORIENTED_EDGE('',*,*,#12635,.T.);+#12635=EDGE_CURVE('',#4490,#4558,#12636,.T.);+#12636=LINE('',#4491,#780);+#12637=ORIENTED_EDGE('',*,*,#11518,.F.);+#12638=ORIENTED_EDGE('',*,*,#4494,.F.);+#12639=CYLINDRICAL_SURFACE('',#12640,0.25);+#12640=AXIS2_PLACEMENT_3D('',#4454,#3673,#3650);+#12641=ADVANCED_FACE('',(#12642),#12649,.F.);+#12642=FACE_BOUND('',#12643,.F.);+#12643=EDGE_LOOP('',(#12644,#4556,#12647,#12648));+#12644=ORIENTED_EDGE('',*,*,#12645,.T.);+#12645=EDGE_CURVE('',#4484,#4552,#12646,.T.);+#12646=LINE('',#4485,#780);+#12647=ORIENTED_EDGE('',*,*,#12635,.F.);+#12648=ORIENTED_EDGE('',*,*,#4489,.F.);+#12649=PLANE('',#12650);+#12650=AXIS2_PLACEMENT_3D('',#4485,#12181,#3643);+#12651=ADVANCED_FACE('',(#12652),#12659,.F.);+#12652=FACE_BOUND('',#12653,.F.);+#12653=EDGE_LOOP('',(#12654,#4550,#12657,#12658));+#12654=ORIENTED_EDGE('',*,*,#12655,.T.);+#12655=EDGE_CURVE('',#4479,#4547,#12656,.T.);+#12656=LINE('',#4480,#780);+#12657=ORIENTED_EDGE('',*,*,#12645,.F.);+#12658=ORIENTED_EDGE('',*,*,#4483,.F.);+#12659=CYLINDRICAL_SURFACE('',#12660,0.1);+#12660=AXIS2_PLACEMENT_3D('',#4466,#3673,#3636);+#12661=ADVANCED_FACE('',(#12662),#12669,.F.);+#12662=FACE_BOUND('',#12663,.F.);+#12663=EDGE_LOOP('',(#12664,#4545,#12667,#12668));+#12664=ORIENTED_EDGE('',*,*,#12665,.T.);+#12665=EDGE_CURVE('',#4474,#4542,#12666,.T.);+#12666=LINE('',#4475,#780);+#12667=ORIENTED_EDGE('',*,*,#12655,.F.);+#12668=ORIENTED_EDGE('',*,*,#4478,.F.);+#12669=PLANE('',#12670);+#12670=AXIS2_PLACEMENT_3D('',#4475,#3014,#719);+#12671=ADVANCED_FACE('',(#12672),#12679,.F.);+#12672=FACE_BOUND('',#12673,.F.);+#12673=EDGE_LOOP('',(#12674,#4540,#12677,#12678));+#12674=ORIENTED_EDGE('',*,*,#12675,.T.);+#12675=EDGE_CURVE('',#4469,#4537,#12676,.T.);+#12676=LINE('',#4470,#780);+#12677=ORIENTED_EDGE('',*,*,#12665,.F.);+#12678=ORIENTED_EDGE('',*,*,#4473,.F.);+#12679=PLANE('',#12680);+#12680=AXIS2_PLACEMENT_3D('',#4470,#719,#13);+#12681=ADVANCED_FACE('',(#12682),#12689,.F.);+#12682=FACE_BOUND('',#12683,.F.);+#12683=EDGE_LOOP('',(#12684,#4535,#12687,#12688));+#12684=ORIENTED_EDGE('',*,*,#12685,.T.);+#12685=EDGE_CURVE('',#4462,#4530,#12686,.T.);+#12686=LINE('',#4463,#780);+#12687=ORIENTED_EDGE('',*,*,#12675,.F.);+#12688=ORIENTED_EDGE('',*,*,#4468,.F.);+#12689=PLANE('',#12690);+#12690=AXIS2_PLACEMENT_3D('',#4463,#13,#769);+#12691=ADVANCED_FACE('',(#12692),#12699,.T.);+#12692=FACE_BOUND('',#12693,.F.);+#12693=EDGE_LOOP('',(#12694,#4528,#12697,#12698));+#12694=ORIENTED_EDGE('',*,*,#12695,.T.);+#12695=EDGE_CURVE('',#4457,#4525,#12696,.T.);+#12696=LINE('',#4458,#780);+#12697=ORIENTED_EDGE('',*,*,#12685,.F.);+#12698=ORIENTED_EDGE('',*,*,#4461,.F.);+#12699=CYLINDRICAL_SURFACE('',#12700,0.25);+#12700=AXIS2_PLACEMENT_3D('',#4466,#3673,#3613);+#12701=ADVANCED_FACE('',(#12702),#12707,.F.);+#12702=FACE_BOUND('',#12703,.F.);+#12703=EDGE_LOOP('',(#12704,#4523,#12705,#12706));+#12704=ORIENTED_EDGE('',*,*,#4515,.T.);+#12705=ORIENTED_EDGE('',*,*,#12695,.F.);+#12706=ORIENTED_EDGE('',*,*,#4456,.F.);+#12707=PLANE('',#12708);+#12708=AXIS2_PLACEMENT_3D('',#4451,#12240,#3604);+#12709=ADVANCED_FACE('',(#12710),#12717,.T.);+#12710=FACE_BOUND('',#12711,.F.);+#12711=EDGE_LOOP('',(#12712,#4702,#12715,#12716));+#12712=ORIENTED_EDGE('',*,*,#12713,.T.);+#12713=EDGE_CURVE('',#4631,#4699,#12714,.T.);+#12714=LINE('',#4632,#780);+#12715=ORIENTED_EDGE('',*,*,#11530,.F.);+#12716=ORIENTED_EDGE('',*,*,#4635,.F.);+#12717=CYLINDRICAL_SURFACE('',#12718,0.25);+#12718=AXIS2_PLACEMENT_3D('',#4595,#3673,#3650);+#12719=ADVANCED_FACE('',(#12720),#12727,.F.);+#12720=FACE_BOUND('',#12721,.F.);+#12721=EDGE_LOOP('',(#12722,#4697,#12725,#12726));+#12722=ORIENTED_EDGE('',*,*,#12723,.T.);+#12723=EDGE_CURVE('',#4625,#4693,#12724,.T.);+#12724=LINE('',#4626,#780);+#12725=ORIENTED_EDGE('',*,*,#12713,.F.);+#12726=ORIENTED_EDGE('',*,*,#4630,.F.);+#12727=PLANE('',#12728);+#12728=AXIS2_PLACEMENT_3D('',#4626,#12181,#3643);+#12729=ADVANCED_FACE('',(#12730),#12737,.F.);+#12730=FACE_BOUND('',#12731,.F.);+#12731=EDGE_LOOP('',(#12732,#4691,#12735,#12736));+#12732=ORIENTED_EDGE('',*,*,#12733,.T.);+#12733=EDGE_CURVE('',#4620,#4688,#12734,.T.);+#12734=LINE('',#4621,#780);+#12735=ORIENTED_EDGE('',*,*,#12723,.F.);+#12736=ORIENTED_EDGE('',*,*,#4624,.F.);+#12737=CYLINDRICAL_SURFACE('',#12738,0.1);+#12738=AXIS2_PLACEMENT_3D('',#4607,#3673,#3636);+#12739=ADVANCED_FACE('',(#12740),#12747,.F.);+#12740=FACE_BOUND('',#12741,.F.);+#12741=EDGE_LOOP('',(#12742,#4686,#12745,#12746));+#12742=ORIENTED_EDGE('',*,*,#12743,.T.);+#12743=EDGE_CURVE('',#4615,#4683,#12744,.T.);+#12744=LINE('',#4616,#780);+#12745=ORIENTED_EDGE('',*,*,#12733,.F.);+#12746=ORIENTED_EDGE('',*,*,#4619,.F.);+#12747=PLANE('',#12748);+#12748=AXIS2_PLACEMENT_3D('',#4616,#3014,#719);+#12749=ADVANCED_FACE('',(#12750),#12757,.F.);+#12750=FACE_BOUND('',#12751,.F.);+#12751=EDGE_LOOP('',(#12752,#4681,#12755,#12756));+#12752=ORIENTED_EDGE('',*,*,#12753,.T.);+#12753=EDGE_CURVE('',#4610,#4678,#12754,.T.);+#12754=LINE('',#4611,#780);+#12755=ORIENTED_EDGE('',*,*,#12743,.F.);+#12756=ORIENTED_EDGE('',*,*,#4614,.F.);+#12757=PLANE('',#12758);+#12758=AXIS2_PLACEMENT_3D('',#4611,#719,#13);+#12759=ADVANCED_FACE('',(#12760),#12767,.F.);+#12760=FACE_BOUND('',#12761,.F.);+#12761=EDGE_LOOP('',(#12762,#4676,#12765,#12766));+#12762=ORIENTED_EDGE('',*,*,#12763,.T.);+#12763=EDGE_CURVE('',#4603,#4671,#12764,.T.);+#12764=LINE('',#4604,#780);+#12765=ORIENTED_EDGE('',*,*,#12753,.F.);+#12766=ORIENTED_EDGE('',*,*,#4609,.F.);+#12767=PLANE('',#12768);+#12768=AXIS2_PLACEMENT_3D('',#4604,#13,#769);+#12769=ADVANCED_FACE('',(#12770),#12777,.T.);+#12770=FACE_BOUND('',#12771,.F.);+#12771=EDGE_LOOP('',(#12772,#4669,#12775,#12776));+#12772=ORIENTED_EDGE('',*,*,#12773,.T.);+#12773=EDGE_CURVE('',#4598,#4666,#12774,.T.);+#12774=LINE('',#4599,#780);+#12775=ORIENTED_EDGE('',*,*,#12763,.F.);+#12776=ORIENTED_EDGE('',*,*,#4602,.F.);+#12777=CYLINDRICAL_SURFACE('',#12778,0.25);+#12778=AXIS2_PLACEMENT_3D('',#4607,#3673,#3613);+#12779=ADVANCED_FACE('',(#12780),#12785,.F.);+#12780=FACE_BOUND('',#12781,.F.);+#12781=EDGE_LOOP('',(#12782,#4664,#12783,#12784));+#12782=ORIENTED_EDGE('',*,*,#4656,.T.);+#12783=ORIENTED_EDGE('',*,*,#12773,.F.);+#12784=ORIENTED_EDGE('',*,*,#4597,.F.);+#12785=PLANE('',#12786);+#12786=AXIS2_PLACEMENT_3D('',#4592,#12240,#3604);+#12787=ADVANCED_FACE('',(#12788),#12795,.T.);+#12788=FACE_BOUND('',#12789,.F.);+#12789=EDGE_LOOP('',(#12790,#4843,#12793,#12794));+#12790=ORIENTED_EDGE('',*,*,#12791,.T.);+#12791=EDGE_CURVE('',#4772,#4840,#12792,.T.);+#12792=LINE('',#4773,#780);+#12793=ORIENTED_EDGE('',*,*,#11542,.F.);+#12794=ORIENTED_EDGE('',*,*,#4776,.F.);+#12795=CYLINDRICAL_SURFACE('',#12796,0.25);+#12796=AXIS2_PLACEMENT_3D('',#4736,#3673,#3650);+#12797=ADVANCED_FACE('',(#12798),#12805,.F.);+#12798=FACE_BOUND('',#12799,.F.);+#12799=EDGE_LOOP('',(#12800,#4838,#12803,#12804));+#12800=ORIENTED_EDGE('',*,*,#12801,.T.);+#12801=EDGE_CURVE('',#4766,#4834,#12802,.T.);+#12802=LINE('',#4767,#780);+#12803=ORIENTED_EDGE('',*,*,#12791,.F.);+#12804=ORIENTED_EDGE('',*,*,#4771,.F.);+#12805=PLANE('',#12806);+#12806=AXIS2_PLACEMENT_3D('',#4767,#12181,#3643);+#12807=ADVANCED_FACE('',(#12808),#12815,.F.);+#12808=FACE_BOUND('',#12809,.F.);+#12809=EDGE_LOOP('',(#12810,#4832,#12813,#12814));+#12810=ORIENTED_EDGE('',*,*,#12811,.T.);+#12811=EDGE_CURVE('',#4761,#4829,#12812,.T.);+#12812=LINE('',#4762,#780);+#12813=ORIENTED_EDGE('',*,*,#12801,.F.);+#12814=ORIENTED_EDGE('',*,*,#4765,.F.);+#12815=CYLINDRICAL_SURFACE('',#12816,0.1);+#12816=AXIS2_PLACEMENT_3D('',#4748,#3673,#3636);+#12817=ADVANCED_FACE('',(#12818),#12825,.F.);+#12818=FACE_BOUND('',#12819,.F.);+#12819=EDGE_LOOP('',(#12820,#4827,#12823,#12824));+#12820=ORIENTED_EDGE('',*,*,#12821,.T.);+#12821=EDGE_CURVE('',#4756,#4824,#12822,.T.);+#12822=LINE('',#4757,#780);+#12823=ORIENTED_EDGE('',*,*,#12811,.F.);+#12824=ORIENTED_EDGE('',*,*,#4760,.F.);+#12825=PLANE('',#12826);+#12826=AXIS2_PLACEMENT_3D('',#4757,#3014,#719);+#12827=ADVANCED_FACE('',(#12828),#12835,.F.);+#12828=FACE_BOUND('',#12829,.F.);+#12829=EDGE_LOOP('',(#12830,#4822,#12833,#12834));+#12830=ORIENTED_EDGE('',*,*,#12831,.T.);+#12831=EDGE_CURVE('',#4751,#4819,#12832,.T.);+#12832=LINE('',#4752,#780);+#12833=ORIENTED_EDGE('',*,*,#12821,.F.);+#12834=ORIENTED_EDGE('',*,*,#4755,.F.);+#12835=PLANE('',#12836);+#12836=AXIS2_PLACEMENT_3D('',#4752,#719,#13);+#12837=ADVANCED_FACE('',(#12838),#12845,.F.);+#12838=FACE_BOUND('',#12839,.F.);+#12839=EDGE_LOOP('',(#12840,#4817,#12843,#12844));+#12840=ORIENTED_EDGE('',*,*,#12841,.T.);+#12841=EDGE_CURVE('',#4744,#4812,#12842,.T.);+#12842=LINE('',#4745,#780);+#12843=ORIENTED_EDGE('',*,*,#12831,.F.);+#12844=ORIENTED_EDGE('',*,*,#4750,.F.);+#12845=PLANE('',#12846);+#12846=AXIS2_PLACEMENT_3D('',#4745,#13,#769);+#12847=ADVANCED_FACE('',(#12848),#12855,.T.);+#12848=FACE_BOUND('',#12849,.F.);+#12849=EDGE_LOOP('',(#12850,#4810,#12853,#12854));+#12850=ORIENTED_EDGE('',*,*,#12851,.T.);+#12851=EDGE_CURVE('',#4739,#4807,#12852,.T.);+#12852=LINE('',#4740,#780);+#12853=ORIENTED_EDGE('',*,*,#12841,.F.);+#12854=ORIENTED_EDGE('',*,*,#4743,.F.);+#12855=CYLINDRICAL_SURFACE('',#12856,0.25);+#12856=AXIS2_PLACEMENT_3D('',#4748,#3673,#3613);+#12857=ADVANCED_FACE('',(#12858),#12863,.F.);+#12858=FACE_BOUND('',#12859,.F.);+#12859=EDGE_LOOP('',(#12860,#4805,#12861,#12862));+#12860=ORIENTED_EDGE('',*,*,#4797,.T.);+#12861=ORIENTED_EDGE('',*,*,#12851,.F.);+#12862=ORIENTED_EDGE('',*,*,#4738,.F.);+#12863=PLANE('',#12864);+#12864=AXIS2_PLACEMENT_3D('',#4733,#12240,#3604);+#12865=ADVANCED_FACE('',(#12866),#12873,.T.);+#12866=FACE_BOUND('',#12867,.F.);+#12867=EDGE_LOOP('',(#12868,#4984,#12871,#12872));+#12868=ORIENTED_EDGE('',*,*,#12869,.T.);+#12869=EDGE_CURVE('',#4913,#4981,#12870,.T.);+#12870=LINE('',#4914,#780);+#12871=ORIENTED_EDGE('',*,*,#11554,.F.);+#12872=ORIENTED_EDGE('',*,*,#4917,.F.);+#12873=CYLINDRICAL_SURFACE('',#12874,0.25);+#12874=AXIS2_PLACEMENT_3D('',#4877,#3673,#3650);+#12875=ADVANCED_FACE('',(#12876),#12883,.F.);+#12876=FACE_BOUND('',#12877,.F.);+#12877=EDGE_LOOP('',(#12878,#4979,#12881,#12882));+#12878=ORIENTED_EDGE('',*,*,#12879,.T.);+#12879=EDGE_CURVE('',#4907,#4975,#12880,.T.);+#12880=LINE('',#4908,#780);+#12881=ORIENTED_EDGE('',*,*,#12869,.F.);+#12882=ORIENTED_EDGE('',*,*,#4912,.F.);+#12883=PLANE('',#12884);+#12884=AXIS2_PLACEMENT_3D('',#4908,#12181,#3643);+#12885=ADVANCED_FACE('',(#12886),#12893,.F.);+#12886=FACE_BOUND('',#12887,.F.);+#12887=EDGE_LOOP('',(#12888,#4973,#12891,#12892));+#12888=ORIENTED_EDGE('',*,*,#12889,.T.);+#12889=EDGE_CURVE('',#4902,#4970,#12890,.T.);+#12890=LINE('',#4903,#780);+#12891=ORIENTED_EDGE('',*,*,#12879,.F.);+#12892=ORIENTED_EDGE('',*,*,#4906,.F.);+#12893=CYLINDRICAL_SURFACE('',#12894,0.1);+#12894=AXIS2_PLACEMENT_3D('',#4889,#3673,#3636);+#12895=ADVANCED_FACE('',(#12896),#12903,.F.);+#12896=FACE_BOUND('',#12897,.F.);+#12897=EDGE_LOOP('',(#12898,#4968,#12901,#12902));+#12898=ORIENTED_EDGE('',*,*,#12899,.T.);+#12899=EDGE_CURVE('',#4897,#4965,#12900,.T.);+#12900=LINE('',#4898,#780);+#12901=ORIENTED_EDGE('',*,*,#12889,.F.);+#12902=ORIENTED_EDGE('',*,*,#4901,.F.);+#12903=PLANE('',#12904);+#12904=AXIS2_PLACEMENT_3D('',#4898,#3014,#719);+#12905=ADVANCED_FACE('',(#12906),#12913,.F.);+#12906=FACE_BOUND('',#12907,.F.);+#12907=EDGE_LOOP('',(#12908,#4963,#12911,#12912));+#12908=ORIENTED_EDGE('',*,*,#12909,.T.);+#12909=EDGE_CURVE('',#4892,#4960,#12910,.T.);+#12910=LINE('',#4893,#780);+#12911=ORIENTED_EDGE('',*,*,#12899,.F.);+#12912=ORIENTED_EDGE('',*,*,#4896,.F.);+#12913=PLANE('',#12914);+#12914=AXIS2_PLACEMENT_3D('',#4893,#719,#13);+#12915=ADVANCED_FACE('',(#12916),#12923,.F.);+#12916=FACE_BOUND('',#12917,.F.);+#12917=EDGE_LOOP('',(#12918,#4958,#12921,#12922));+#12918=ORIENTED_EDGE('',*,*,#12919,.T.);+#12919=EDGE_CURVE('',#4885,#4953,#12920,.T.);+#12920=LINE('',#4886,#780);+#12921=ORIENTED_EDGE('',*,*,#12909,.F.);+#12922=ORIENTED_EDGE('',*,*,#4891,.F.);+#12923=PLANE('',#12924);+#12924=AXIS2_PLACEMENT_3D('',#4886,#13,#769);+#12925=ADVANCED_FACE('',(#12926),#12933,.T.);+#12926=FACE_BOUND('',#12927,.F.);+#12927=EDGE_LOOP('',(#12928,#4951,#12931,#12932));+#12928=ORIENTED_EDGE('',*,*,#12929,.T.);+#12929=EDGE_CURVE('',#4880,#4948,#12930,.T.);+#12930=LINE('',#4881,#780);+#12931=ORIENTED_EDGE('',*,*,#12919,.F.);+#12932=ORIENTED_EDGE('',*,*,#4884,.F.);+#12933=CYLINDRICAL_SURFACE('',#12934,0.25);+#12934=AXIS2_PLACEMENT_3D('',#4889,#3673,#3613);+#12935=ADVANCED_FACE('',(#12936),#12941,.F.);+#12936=FACE_BOUND('',#12937,.F.);+#12937=EDGE_LOOP('',(#12938,#4946,#12939,#12940));+#12938=ORIENTED_EDGE('',*,*,#4938,.T.);+#12939=ORIENTED_EDGE('',*,*,#12929,.F.);+#12940=ORIENTED_EDGE('',*,*,#4879,.F.);+#12941=PLANE('',#12942);+#12942=AXIS2_PLACEMENT_3D('',#4874,#12240,#3604);+#12943=ADVANCED_FACE('',(#12944),#12951,.T.);+#12944=FACE_BOUND('',#12945,.F.);+#12945=EDGE_LOOP('',(#12946,#5125,#12949,#12950));+#12946=ORIENTED_EDGE('',*,*,#12947,.T.);+#12947=EDGE_CURVE('',#5054,#5122,#12948,.T.);+#12948=LINE('',#5055,#780);+#12949=ORIENTED_EDGE('',*,*,#11566,.F.);+#12950=ORIENTED_EDGE('',*,*,#5058,.F.);+#12951=CYLINDRICAL_SURFACE('',#12952,0.25);+#12952=AXIS2_PLACEMENT_3D('',#5018,#3673,#3650);+#12953=ADVANCED_FACE('',(#12954),#12961,.F.);+#12954=FACE_BOUND('',#12955,.F.);+#12955=EDGE_LOOP('',(#12956,#5120,#12959,#12960));+#12956=ORIENTED_EDGE('',*,*,#12957,.T.);+#12957=EDGE_CURVE('',#5048,#5116,#12958,.T.);+#12958=LINE('',#5049,#780);+#12959=ORIENTED_EDGE('',*,*,#12947,.F.);+#12960=ORIENTED_EDGE('',*,*,#5053,.F.);+#12961=PLANE('',#12962);+#12962=AXIS2_PLACEMENT_3D('',#5049,#12181,#3643);+#12963=ADVANCED_FACE('',(#12964),#12971,.F.);+#12964=FACE_BOUND('',#12965,.F.);+#12965=EDGE_LOOP('',(#12966,#5114,#12969,#12970));+#12966=ORIENTED_EDGE('',*,*,#12967,.T.);+#12967=EDGE_CURVE('',#5043,#5111,#12968,.T.);+#12968=LINE('',#5044,#780);+#12969=ORIENTED_EDGE('',*,*,#12957,.F.);+#12970=ORIENTED_EDGE('',*,*,#5047,.F.);+#12971=CYLINDRICAL_SURFACE('',#12972,0.1);+#12972=AXIS2_PLACEMENT_3D('',#5030,#3673,#3636);+#12973=ADVANCED_FACE('',(#12974),#12981,.F.);+#12974=FACE_BOUND('',#12975,.F.);+#12975=EDGE_LOOP('',(#12976,#5109,#12979,#12980));+#12976=ORIENTED_EDGE('',*,*,#12977,.T.);+#12977=EDGE_CURVE('',#5038,#5106,#12978,.T.);+#12978=LINE('',#5039,#780);+#12979=ORIENTED_EDGE('',*,*,#12967,.F.);+#12980=ORIENTED_EDGE('',*,*,#5042,.F.);+#12981=PLANE('',#12982);+#12982=AXIS2_PLACEMENT_3D('',#5039,#3014,#719);+#12983=ADVANCED_FACE('',(#12984),#12991,.F.);+#12984=FACE_BOUND('',#12985,.F.);+#12985=EDGE_LOOP('',(#12986,#5104,#12989,#12990));+#12986=ORIENTED_EDGE('',*,*,#12987,.T.);+#12987=EDGE_CURVE('',#5033,#5101,#12988,.T.);+#12988=LINE('',#5034,#780);+#12989=ORIENTED_EDGE('',*,*,#12977,.F.);+#12990=ORIENTED_EDGE('',*,*,#5037,.F.);+#12991=PLANE('',#12992);+#12992=AXIS2_PLACEMENT_3D('',#5034,#719,#13);+#12993=ADVANCED_FACE('',(#12994),#13001,.F.);+#12994=FACE_BOUND('',#12995,.F.);+#12995=EDGE_LOOP('',(#12996,#5099,#12999,#13000));+#12996=ORIENTED_EDGE('',*,*,#12997,.T.);+#12997=EDGE_CURVE('',#5026,#5094,#12998,.T.);+#12998=LINE('',#5027,#780);+#12999=ORIENTED_EDGE('',*,*,#12987,.F.);+#13000=ORIENTED_EDGE('',*,*,#5032,.F.);+#13001=PLANE('',#13002);+#13002=AXIS2_PLACEMENT_3D('',#5027,#13,#769);+#13003=ADVANCED_FACE('',(#13004),#13011,.T.);+#13004=FACE_BOUND('',#13005,.F.);+#13005=EDGE_LOOP('',(#13006,#5092,#13009,#13010));+#13006=ORIENTED_EDGE('',*,*,#13007,.T.);+#13007=EDGE_CURVE('',#5021,#5089,#13008,.T.);+#13008=LINE('',#5022,#780);+#13009=ORIENTED_EDGE('',*,*,#12997,.F.);+#13010=ORIENTED_EDGE('',*,*,#5025,.F.);+#13011=CYLINDRICAL_SURFACE('',#13012,0.25);+#13012=AXIS2_PLACEMENT_3D('',#5030,#3673,#3613);+#13013=ADVANCED_FACE('',(#13014),#13019,.F.);+#13014=FACE_BOUND('',#13015,.F.);+#13015=EDGE_LOOP('',(#13016,#5087,#13017,#13018));+#13016=ORIENTED_EDGE('',*,*,#5079,.T.);+#13017=ORIENTED_EDGE('',*,*,#13007,.F.);+#13018=ORIENTED_EDGE('',*,*,#5020,.F.);+#13019=PLANE('',#13020);+#13020=AXIS2_PLACEMENT_3D('',#5015,#12240,#3604);+#13021=ADVANCED_FACE('',(#13022),#13029,.T.);+#13022=FACE_BOUND('',#13023,.F.);+#13023=EDGE_LOOP('',(#13024,#5266,#13027,#13028));+#13024=ORIENTED_EDGE('',*,*,#13025,.T.);+#13025=EDGE_CURVE('',#5195,#5263,#13026,.T.);+#13026=LINE('',#5196,#780);+#13027=ORIENTED_EDGE('',*,*,#11578,.F.);+#13028=ORIENTED_EDGE('',*,*,#5199,.F.);+#13029=CYLINDRICAL_SURFACE('',#13030,0.25);+#13030=AXIS2_PLACEMENT_3D('',#5159,#3673,#3650);+#13031=ADVANCED_FACE('',(#13032),#13039,.F.);+#13032=FACE_BOUND('',#13033,.F.);+#13033=EDGE_LOOP('',(#13034,#5261,#13037,#13038));+#13034=ORIENTED_EDGE('',*,*,#13035,.T.);+#13035=EDGE_CURVE('',#5189,#5257,#13036,.T.);+#13036=LINE('',#5190,#780);+#13037=ORIENTED_EDGE('',*,*,#13025,.F.);+#13038=ORIENTED_EDGE('',*,*,#5194,.F.);+#13039=PLANE('',#13040);+#13040=AXIS2_PLACEMENT_3D('',#5190,#12181,#3643);+#13041=ADVANCED_FACE('',(#13042),#13049,.F.);+#13042=FACE_BOUND('',#13043,.F.);+#13043=EDGE_LOOP('',(#13044,#5255,#13047,#13048));+#13044=ORIENTED_EDGE('',*,*,#13045,.T.);+#13045=EDGE_CURVE('',#5184,#5252,#13046,.T.);+#13046=LINE('',#5185,#780);+#13047=ORIENTED_EDGE('',*,*,#13035,.F.);+#13048=ORIENTED_EDGE('',*,*,#5188,.F.);+#13049=CYLINDRICAL_SURFACE('',#13050,0.1);+#13050=AXIS2_PLACEMENT_3D('',#5171,#3673,#3636);+#13051=ADVANCED_FACE('',(#13052),#13059,.F.);+#13052=FACE_BOUND('',#13053,.F.);+#13053=EDGE_LOOP('',(#13054,#5250,#13057,#13058));+#13054=ORIENTED_EDGE('',*,*,#13055,.T.);+#13055=EDGE_CURVE('',#5179,#5247,#13056,.T.);+#13056=LINE('',#5180,#780);+#13057=ORIENTED_EDGE('',*,*,#13045,.F.);+#13058=ORIENTED_EDGE('',*,*,#5183,.F.);+#13059=PLANE('',#13060);+#13060=AXIS2_PLACEMENT_3D('',#5180,#3014,#719);+#13061=ADVANCED_FACE('',(#13062),#13069,.F.);+#13062=FACE_BOUND('',#13063,.F.);+#13063=EDGE_LOOP('',(#13064,#5245,#13067,#13068));+#13064=ORIENTED_EDGE('',*,*,#13065,.T.);+#13065=EDGE_CURVE('',#5174,#5242,#13066,.T.);+#13066=LINE('',#5175,#780);+#13067=ORIENTED_EDGE('',*,*,#13055,.F.);+#13068=ORIENTED_EDGE('',*,*,#5178,.F.);+#13069=PLANE('',#13070);+#13070=AXIS2_PLACEMENT_3D('',#5175,#719,#13);+#13071=ADVANCED_FACE('',(#13072),#13079,.F.);+#13072=FACE_BOUND('',#13073,.F.);+#13073=EDGE_LOOP('',(#13074,#5240,#13077,#13078));+#13074=ORIENTED_EDGE('',*,*,#13075,.T.);+#13075=EDGE_CURVE('',#5167,#5235,#13076,.T.);+#13076=LINE('',#5168,#780);+#13077=ORIENTED_EDGE('',*,*,#13065,.F.);+#13078=ORIENTED_EDGE('',*,*,#5173,.F.);+#13079=PLANE('',#13080);+#13080=AXIS2_PLACEMENT_3D('',#5168,#13,#769);+#13081=ADVANCED_FACE('',(#13082),#13089,.T.);+#13082=FACE_BOUND('',#13083,.F.);+#13083=EDGE_LOOP('',(#13084,#5233,#13087,#13088));+#13084=ORIENTED_EDGE('',*,*,#13085,.T.);+#13085=EDGE_CURVE('',#5162,#5230,#13086,.T.);+#13086=LINE('',#5163,#780);+#13087=ORIENTED_EDGE('',*,*,#13075,.F.);+#13088=ORIENTED_EDGE('',*,*,#5166,.F.);+#13089=CYLINDRICAL_SURFACE('',#13090,0.25);+#13090=AXIS2_PLACEMENT_3D('',#5171,#3673,#3613);+#13091=ADVANCED_FACE('',(#13092),#13097,.F.);+#13092=FACE_BOUND('',#13093,.F.);+#13093=EDGE_LOOP('',(#13094,#5228,#13095,#13096));+#13094=ORIENTED_EDGE('',*,*,#5220,.T.);+#13095=ORIENTED_EDGE('',*,*,#13085,.F.);+#13096=ORIENTED_EDGE('',*,*,#5161,.F.);+#13097=PLANE('',#13098);+#13098=AXIS2_PLACEMENT_3D('',#5156,#12240,#3604);+#13099=ADVANCED_FACE('',(#13100),#13107,.T.);+#13100=FACE_BOUND('',#13101,.F.);+#13101=EDGE_LOOP('',(#13102,#5407,#13105,#13106));+#13102=ORIENTED_EDGE('',*,*,#13103,.T.);+#13103=EDGE_CURVE('',#5336,#5404,#13104,.T.);+#13104=LINE('',#5337,#780);+#13105=ORIENTED_EDGE('',*,*,#11590,.F.);+#13106=ORIENTED_EDGE('',*,*,#5340,.F.);+#13107=CYLINDRICAL_SURFACE('',#13108,0.25);+#13108=AXIS2_PLACEMENT_3D('',#5300,#3673,#3650);+#13109=ADVANCED_FACE('',(#13110),#13117,.F.);+#13110=FACE_BOUND('',#13111,.F.);+#13111=EDGE_LOOP('',(#13112,#5402,#13115,#13116));+#13112=ORIENTED_EDGE('',*,*,#13113,.T.);+#13113=EDGE_CURVE('',#5330,#5398,#13114,.T.);+#13114=LINE('',#5331,#780);+#13115=ORIENTED_EDGE('',*,*,#13103,.F.);+#13116=ORIENTED_EDGE('',*,*,#5335,.F.);+#13117=PLANE('',#13118);+#13118=AXIS2_PLACEMENT_3D('',#5331,#12181,#3643);+#13119=ADVANCED_FACE('',(#13120),#13127,.F.);+#13120=FACE_BOUND('',#13121,.F.);+#13121=EDGE_LOOP('',(#13122,#5396,#13125,#13126));+#13122=ORIENTED_EDGE('',*,*,#13123,.T.);+#13123=EDGE_CURVE('',#5325,#5393,#13124,.T.);+#13124=LINE('',#5326,#780);+#13125=ORIENTED_EDGE('',*,*,#13113,.F.);+#13126=ORIENTED_EDGE('',*,*,#5329,.F.);+#13127=CYLINDRICAL_SURFACE('',#13128,0.1);+#13128=AXIS2_PLACEMENT_3D('',#5312,#3673,#3636);+#13129=ADVANCED_FACE('',(#13130),#13137,.F.);+#13130=FACE_BOUND('',#13131,.F.);+#13131=EDGE_LOOP('',(#13132,#5391,#13135,#13136));+#13132=ORIENTED_EDGE('',*,*,#13133,.T.);+#13133=EDGE_CURVE('',#5320,#5388,#13134,.T.);+#13134=LINE('',#5321,#780);+#13135=ORIENTED_EDGE('',*,*,#13123,.F.);+#13136=ORIENTED_EDGE('',*,*,#5324,.F.);+#13137=PLANE('',#13138);+#13138=AXIS2_PLACEMENT_3D('',#5321,#3014,#719);+#13139=ADVANCED_FACE('',(#13140),#13147,.F.);+#13140=FACE_BOUND('',#13141,.F.);+#13141=EDGE_LOOP('',(#13142,#5386,#13145,#13146));+#13142=ORIENTED_EDGE('',*,*,#13143,.T.);+#13143=EDGE_CURVE('',#5315,#5383,#13144,.T.);+#13144=LINE('',#5316,#780);+#13145=ORIENTED_EDGE('',*,*,#13133,.F.);+#13146=ORIENTED_EDGE('',*,*,#5319,.F.);+#13147=PLANE('',#13148);+#13148=AXIS2_PLACEMENT_3D('',#5316,#719,#13);+#13149=ADVANCED_FACE('',(#13150),#13157,.F.);+#13150=FACE_BOUND('',#13151,.F.);+#13151=EDGE_LOOP('',(#13152,#5381,#13155,#13156));+#13152=ORIENTED_EDGE('',*,*,#13153,.T.);+#13153=EDGE_CURVE('',#5308,#5376,#13154,.T.);+#13154=LINE('',#5309,#780);+#13155=ORIENTED_EDGE('',*,*,#13143,.F.);+#13156=ORIENTED_EDGE('',*,*,#5314,.F.);+#13157=PLANE('',#13158);+#13158=AXIS2_PLACEMENT_3D('',#5309,#13,#769);+#13159=ADVANCED_FACE('',(#13160),#13167,.T.);+#13160=FACE_BOUND('',#13161,.F.);+#13161=EDGE_LOOP('',(#13162,#5374,#13165,#13166));+#13162=ORIENTED_EDGE('',*,*,#13163,.T.);+#13163=EDGE_CURVE('',#5303,#5371,#13164,.T.);+#13164=LINE('',#5304,#780);+#13165=ORIENTED_EDGE('',*,*,#13153,.F.);+#13166=ORIENTED_EDGE('',*,*,#5307,.F.);+#13167=CYLINDRICAL_SURFACE('',#13168,0.25);+#13168=AXIS2_PLACEMENT_3D('',#5312,#3673,#3613);+#13169=ADVANCED_FACE('',(#13170),#13175,.F.);+#13170=FACE_BOUND('',#13171,.F.);+#13171=EDGE_LOOP('',(#13172,#5369,#13173,#13174));+#13172=ORIENTED_EDGE('',*,*,#5361,.T.);+#13173=ORIENTED_EDGE('',*,*,#13163,.F.);+#13174=ORIENTED_EDGE('',*,*,#5302,.F.);+#13175=PLANE('',#13176);+#13176=AXIS2_PLACEMENT_3D('',#5297,#12240,#3604);+#13177=ADVANCED_FACE('',(#13178),#13185,.T.);+#13178=FACE_BOUND('',#13179,.F.);+#13179=EDGE_LOOP('',(#13180,#5548,#13183,#13184));+#13180=ORIENTED_EDGE('',*,*,#13181,.T.);+#13181=EDGE_CURVE('',#5477,#5545,#13182,.T.);+#13182=LINE('',#5478,#780);+#13183=ORIENTED_EDGE('',*,*,#11602,.F.);+#13184=ORIENTED_EDGE('',*,*,#5481,.F.);+#13185=CYLINDRICAL_SURFACE('',#13186,0.25);+#13186=AXIS2_PLACEMENT_3D('',#5441,#3673,#3650);+#13187=ADVANCED_FACE('',(#13188),#13195,.F.);+#13188=FACE_BOUND('',#13189,.F.);+#13189=EDGE_LOOP('',(#13190,#5543,#13193,#13194));+#13190=ORIENTED_EDGE('',*,*,#13191,.T.);+#13191=EDGE_CURVE('',#5471,#5539,#13192,.T.);+#13192=LINE('',#5472,#780);+#13193=ORIENTED_EDGE('',*,*,#13181,.F.);+#13194=ORIENTED_EDGE('',*,*,#5476,.F.);+#13195=PLANE('',#13196);+#13196=AXIS2_PLACEMENT_3D('',#5472,#12181,#3643);+#13197=ADVANCED_FACE('',(#13198),#13205,.F.);+#13198=FACE_BOUND('',#13199,.F.);+#13199=EDGE_LOOP('',(#13200,#5537,#13203,#13204));+#13200=ORIENTED_EDGE('',*,*,#13201,.T.);+#13201=EDGE_CURVE('',#5466,#5534,#13202,.T.);+#13202=LINE('',#5467,#780);+#13203=ORIENTED_EDGE('',*,*,#13191,.F.);+#13204=ORIENTED_EDGE('',*,*,#5470,.F.);+#13205=CYLINDRICAL_SURFACE('',#13206,0.1);+#13206=AXIS2_PLACEMENT_3D('',#5453,#3673,#3636);+#13207=ADVANCED_FACE('',(#13208),#13215,.F.);+#13208=FACE_BOUND('',#13209,.F.);+#13209=EDGE_LOOP('',(#13210,#5532,#13213,#13214));+#13210=ORIENTED_EDGE('',*,*,#13211,.T.);+#13211=EDGE_CURVE('',#5461,#5529,#13212,.T.);+#13212=LINE('',#5462,#780);+#13213=ORIENTED_EDGE('',*,*,#13201,.F.);+#13214=ORIENTED_EDGE('',*,*,#5465,.F.);+#13215=PLANE('',#13216);+#13216=AXIS2_PLACEMENT_3D('',#5462,#3014,#719);+#13217=ADVANCED_FACE('',(#13218),#13225,.F.);+#13218=FACE_BOUND('',#13219,.F.);+#13219=EDGE_LOOP('',(#13220,#5527,#13223,#13224));+#13220=ORIENTED_EDGE('',*,*,#13221,.T.);+#13221=EDGE_CURVE('',#5456,#5524,#13222,.T.);+#13222=LINE('',#5457,#780);+#13223=ORIENTED_EDGE('',*,*,#13211,.F.);+#13224=ORIENTED_EDGE('',*,*,#5460,.F.);+#13225=PLANE('',#13226);+#13226=AXIS2_PLACEMENT_3D('',#5457,#719,#13);+#13227=ADVANCED_FACE('',(#13228),#13235,.F.);+#13228=FACE_BOUND('',#13229,.F.);+#13229=EDGE_LOOP('',(#13230,#5522,#13233,#13234));+#13230=ORIENTED_EDGE('',*,*,#13231,.T.);+#13231=EDGE_CURVE('',#5449,#5517,#13232,.T.);+#13232=LINE('',#5450,#780);+#13233=ORIENTED_EDGE('',*,*,#13221,.F.);+#13234=ORIENTED_EDGE('',*,*,#5455,.F.);+#13235=PLANE('',#13236);+#13236=AXIS2_PLACEMENT_3D('',#5450,#13,#769);+#13237=ADVANCED_FACE('',(#13238),#13245,.T.);+#13238=FACE_BOUND('',#13239,.F.);+#13239=EDGE_LOOP('',(#13240,#5515,#13243,#13244));+#13240=ORIENTED_EDGE('',*,*,#13241,.T.);+#13241=EDGE_CURVE('',#5444,#5512,#13242,.T.);+#13242=LINE('',#5445,#780);+#13243=ORIENTED_EDGE('',*,*,#13231,.F.);+#13244=ORIENTED_EDGE('',*,*,#5448,.F.);+#13245=CYLINDRICAL_SURFACE('',#13246,0.25);+#13246=AXIS2_PLACEMENT_3D('',#5453,#3673,#3613);+#13247=ADVANCED_FACE('',(#13248),#13253,.F.);+#13248=FACE_BOUND('',#13249,.F.);+#13249=EDGE_LOOP('',(#13250,#5510,#13251,#13252));+#13250=ORIENTED_EDGE('',*,*,#5502,.T.);+#13251=ORIENTED_EDGE('',*,*,#13241,.F.);+#13252=ORIENTED_EDGE('',*,*,#5443,.F.);+#13253=PLANE('',#13254);+#13254=AXIS2_PLACEMENT_3D('',#5438,#12240,#3604);+#13255=ADVANCED_FACE('',(#13256),#13263,.T.);+#13256=FACE_BOUND('',#13257,.F.);+#13257=EDGE_LOOP('',(#13258,#5689,#13261,#13262));+#13258=ORIENTED_EDGE('',*,*,#13259,.T.);+#13259=EDGE_CURVE('',#5618,#5686,#13260,.T.);+#13260=LINE('',#5619,#780);+#13261=ORIENTED_EDGE('',*,*,#11614,.F.);+#13262=ORIENTED_EDGE('',*,*,#5622,.F.);+#13263=CYLINDRICAL_SURFACE('',#13264,0.25);+#13264=AXIS2_PLACEMENT_3D('',#5582,#3673,#3650);+#13265=ADVANCED_FACE('',(#13266),#13273,.F.);+#13266=FACE_BOUND('',#13267,.F.);+#13267=EDGE_LOOP('',(#13268,#5684,#13271,#13272));+#13268=ORIENTED_EDGE('',*,*,#13269,.T.);+#13269=EDGE_CURVE('',#5612,#5680,#13270,.T.);+#13270=LINE('',#5613,#780);+#13271=ORIENTED_EDGE('',*,*,#13259,.F.);+#13272=ORIENTED_EDGE('',*,*,#5617,.F.);+#13273=PLANE('',#13274);+#13274=AXIS2_PLACEMENT_3D('',#5613,#12181,#3643);+#13275=ADVANCED_FACE('',(#13276),#13283,.F.);+#13276=FACE_BOUND('',#13277,.F.);+#13277=EDGE_LOOP('',(#13278,#5678,#13281,#13282));+#13278=ORIENTED_EDGE('',*,*,#13279,.T.);+#13279=EDGE_CURVE('',#5607,#5675,#13280,.T.);+#13280=LINE('',#5608,#780);+#13281=ORIENTED_EDGE('',*,*,#13269,.F.);+#13282=ORIENTED_EDGE('',*,*,#5611,.F.);+#13283=CYLINDRICAL_SURFACE('',#13284,0.1);+#13284=AXIS2_PLACEMENT_3D('',#5594,#3673,#3636);+#13285=ADVANCED_FACE('',(#13286),#13293,.F.);+#13286=FACE_BOUND('',#13287,.F.);+#13287=EDGE_LOOP('',(#13288,#5673,#13291,#13292));+#13288=ORIENTED_EDGE('',*,*,#13289,.T.);+#13289=EDGE_CURVE('',#5602,#5670,#13290,.T.);+#13290=LINE('',#5603,#780);+#13291=ORIENTED_EDGE('',*,*,#13279,.F.);+#13292=ORIENTED_EDGE('',*,*,#5606,.F.);+#13293=PLANE('',#13294);+#13294=AXIS2_PLACEMENT_3D('',#5603,#3014,#719);+#13295=ADVANCED_FACE('',(#13296),#13303,.F.);+#13296=FACE_BOUND('',#13297,.F.);+#13297=EDGE_LOOP('',(#13298,#5668,#13301,#13302));+#13298=ORIENTED_EDGE('',*,*,#13299,.T.);+#13299=EDGE_CURVE('',#5597,#5665,#13300,.T.);+#13300=LINE('',#5598,#780);+#13301=ORIENTED_EDGE('',*,*,#13289,.F.);+#13302=ORIENTED_EDGE('',*,*,#5601,.F.);+#13303=PLANE('',#13304);+#13304=AXIS2_PLACEMENT_3D('',#5598,#719,#13);+#13305=ADVANCED_FACE('',(#13306),#13313,.F.);+#13306=FACE_BOUND('',#13307,.F.);+#13307=EDGE_LOOP('',(#13308,#5663,#13311,#13312));+#13308=ORIENTED_EDGE('',*,*,#13309,.T.);+#13309=EDGE_CURVE('',#5590,#5658,#13310,.T.);+#13310=LINE('',#5591,#780);+#13311=ORIENTED_EDGE('',*,*,#13299,.F.);+#13312=ORIENTED_EDGE('',*,*,#5596,.F.);+#13313=PLANE('',#13314);+#13314=AXIS2_PLACEMENT_3D('',#5591,#13,#769);+#13315=ADVANCED_FACE('',(#13316),#13323,.T.);+#13316=FACE_BOUND('',#13317,.F.);+#13317=EDGE_LOOP('',(#13318,#5656,#13321,#13322));+#13318=ORIENTED_EDGE('',*,*,#13319,.T.);+#13319=EDGE_CURVE('',#5585,#5653,#13320,.T.);+#13320=LINE('',#5586,#780);+#13321=ORIENTED_EDGE('',*,*,#13309,.F.);+#13322=ORIENTED_EDGE('',*,*,#5589,.F.);+#13323=CYLINDRICAL_SURFACE('',#13324,0.25);+#13324=AXIS2_PLACEMENT_3D('',#5594,#3673,#3613);+#13325=ADVANCED_FACE('',(#13326),#13331,.F.);+#13326=FACE_BOUND('',#13327,.F.);+#13327=EDGE_LOOP('',(#13328,#5651,#13329,#13330));+#13328=ORIENTED_EDGE('',*,*,#5643,.T.);+#13329=ORIENTED_EDGE('',*,*,#13319,.F.);+#13330=ORIENTED_EDGE('',*,*,#5584,.F.);+#13331=PLANE('',#13332);+#13332=AXIS2_PLACEMENT_3D('',#5579,#12240,#3604);+#13333=ADVANCED_FACE('',(#13334),#13341,.T.);+#13334=FACE_BOUND('',#13335,.F.);+#13335=EDGE_LOOP('',(#13336,#5830,#13339,#13340));+#13336=ORIENTED_EDGE('',*,*,#13337,.T.);+#13337=EDGE_CURVE('',#5759,#5827,#13338,.T.);+#13338=LINE('',#5760,#780);+#13339=ORIENTED_EDGE('',*,*,#11626,.F.);+#13340=ORIENTED_EDGE('',*,*,#5763,.F.);+#13341=CYLINDRICAL_SURFACE('',#13342,0.25);+#13342=AXIS2_PLACEMENT_3D('',#5723,#3673,#3650);+#13343=ADVANCED_FACE('',(#13344),#13351,.F.);+#13344=FACE_BOUND('',#13345,.F.);+#13345=EDGE_LOOP('',(#13346,#5825,#13349,#13350));+#13346=ORIENTED_EDGE('',*,*,#13347,.T.);+#13347=EDGE_CURVE('',#5753,#5821,#13348,.T.);+#13348=LINE('',#5754,#780);+#13349=ORIENTED_EDGE('',*,*,#13337,.F.);+#13350=ORIENTED_EDGE('',*,*,#5758,.F.);+#13351=PLANE('',#13352);+#13352=AXIS2_PLACEMENT_3D('',#5754,#12181,#3643);+#13353=ADVANCED_FACE('',(#13354),#13361,.F.);+#13354=FACE_BOUND('',#13355,.F.);+#13355=EDGE_LOOP('',(#13356,#5819,#13359,#13360));+#13356=ORIENTED_EDGE('',*,*,#13357,.T.);+#13357=EDGE_CURVE('',#5748,#5816,#13358,.T.);+#13358=LINE('',#5749,#780);+#13359=ORIENTED_EDGE('',*,*,#13347,.F.);+#13360=ORIENTED_EDGE('',*,*,#5752,.F.);+#13361=CYLINDRICAL_SURFACE('',#13362,0.1);+#13362=AXIS2_PLACEMENT_3D('',#5735,#3673,#3636);+#13363=ADVANCED_FACE('',(#13364),#13371,.F.);+#13364=FACE_BOUND('',#13365,.F.);+#13365=EDGE_LOOP('',(#13366,#5814,#13369,#13370));+#13366=ORIENTED_EDGE('',*,*,#13367,.T.);+#13367=EDGE_CURVE('',#5743,#5811,#13368,.T.);+#13368=LINE('',#5744,#780);+#13369=ORIENTED_EDGE('',*,*,#13357,.F.);+#13370=ORIENTED_EDGE('',*,*,#5747,.F.);+#13371=PLANE('',#13372);+#13372=AXIS2_PLACEMENT_3D('',#5744,#3014,#719);+#13373=ADVANCED_FACE('',(#13374),#13381,.F.);+#13374=FACE_BOUND('',#13375,.F.);+#13375=EDGE_LOOP('',(#13376,#5809,#13379,#13380));+#13376=ORIENTED_EDGE('',*,*,#13377,.T.);+#13377=EDGE_CURVE('',#5738,#5806,#13378,.T.);+#13378=LINE('',#5739,#780);+#13379=ORIENTED_EDGE('',*,*,#13367,.F.);+#13380=ORIENTED_EDGE('',*,*,#5742,.F.);+#13381=PLANE('',#13382);+#13382=AXIS2_PLACEMENT_3D('',#5739,#719,#13);+#13383=ADVANCED_FACE('',(#13384),#13391,.F.);+#13384=FACE_BOUND('',#13385,.F.);+#13385=EDGE_LOOP('',(#13386,#5804,#13389,#13390));+#13386=ORIENTED_EDGE('',*,*,#13387,.T.);+#13387=EDGE_CURVE('',#5731,#5799,#13388,.T.);+#13388=LINE('',#5732,#780);+#13389=ORIENTED_EDGE('',*,*,#13377,.F.);+#13390=ORIENTED_EDGE('',*,*,#5737,.F.);+#13391=PLANE('',#13392);+#13392=AXIS2_PLACEMENT_3D('',#5732,#13,#769);+#13393=ADVANCED_FACE('',(#13394),#13401,.T.);+#13394=FACE_BOUND('',#13395,.F.);+#13395=EDGE_LOOP('',(#13396,#5797,#13399,#13400));+#13396=ORIENTED_EDGE('',*,*,#13397,.T.);+#13397=EDGE_CURVE('',#5726,#5794,#13398,.T.);+#13398=LINE('',#5727,#780);+#13399=ORIENTED_EDGE('',*,*,#13387,.F.);+#13400=ORIENTED_EDGE('',*,*,#5730,.F.);+#13401=CYLINDRICAL_SURFACE('',#13402,0.25);+#13402=AXIS2_PLACEMENT_3D('',#5735,#3673,#3613);+#13403=ADVANCED_FACE('',(#13404),#13409,.F.);+#13404=FACE_BOUND('',#13405,.F.);+#13405=EDGE_LOOP('',(#13406,#5792,#13407,#13408));+#13406=ORIENTED_EDGE('',*,*,#5784,.T.);+#13407=ORIENTED_EDGE('',*,*,#13397,.F.);+#13408=ORIENTED_EDGE('',*,*,#5725,.F.);+#13409=PLANE('',#13410);+#13410=AXIS2_PLACEMENT_3D('',#5720,#12240,#3604);+#13411=ADVANCED_FACE('',(#13412),#13419,.T.);+#13412=FACE_BOUND('',#13413,.F.);+#13413=EDGE_LOOP('',(#13414,#5971,#13417,#13418));+#13414=ORIENTED_EDGE('',*,*,#13415,.T.);+#13415=EDGE_CURVE('',#5900,#5968,#13416,.T.);+#13416=LINE('',#5901,#780);+#13417=ORIENTED_EDGE('',*,*,#11638,.F.);+#13418=ORIENTED_EDGE('',*,*,#5904,.F.);+#13419=CYLINDRICAL_SURFACE('',#13420,0.25);+#13420=AXIS2_PLACEMENT_3D('',#5864,#3673,#3650);+#13421=ADVANCED_FACE('',(#13422),#13429,.F.);+#13422=FACE_BOUND('',#13423,.F.);+#13423=EDGE_LOOP('',(#13424,#5966,#13427,#13428));+#13424=ORIENTED_EDGE('',*,*,#13425,.T.);+#13425=EDGE_CURVE('',#5894,#5962,#13426,.T.);+#13426=LINE('',#5895,#780);+#13427=ORIENTED_EDGE('',*,*,#13415,.F.);+#13428=ORIENTED_EDGE('',*,*,#5899,.F.);+#13429=PLANE('',#13430);+#13430=AXIS2_PLACEMENT_3D('',#5895,#12181,#3643);+#13431=ADVANCED_FACE('',(#13432),#13439,.F.);+#13432=FACE_BOUND('',#13433,.F.);+#13433=EDGE_LOOP('',(#13434,#5960,#13437,#13438));+#13434=ORIENTED_EDGE('',*,*,#13435,.T.);+#13435=EDGE_CURVE('',#5889,#5957,#13436,.T.);+#13436=LINE('',#5890,#780);+#13437=ORIENTED_EDGE('',*,*,#13425,.F.);+#13438=ORIENTED_EDGE('',*,*,#5893,.F.);+#13439=CYLINDRICAL_SURFACE('',#13440,0.1);+#13440=AXIS2_PLACEMENT_3D('',#5876,#3673,#3636);+#13441=ADVANCED_FACE('',(#13442),#13449,.F.);+#13442=FACE_BOUND('',#13443,.F.);+#13443=EDGE_LOOP('',(#13444,#5955,#13447,#13448));+#13444=ORIENTED_EDGE('',*,*,#13445,.T.);+#13445=EDGE_CURVE('',#5884,#5952,#13446,.T.);+#13446=LINE('',#5885,#780);+#13447=ORIENTED_EDGE('',*,*,#13435,.F.);+#13448=ORIENTED_EDGE('',*,*,#5888,.F.);+#13449=PLANE('',#13450);+#13450=AXIS2_PLACEMENT_3D('',#5885,#3014,#719);+#13451=ADVANCED_FACE('',(#13452),#13459,.F.);+#13452=FACE_BOUND('',#13453,.F.);+#13453=EDGE_LOOP('',(#13454,#5950,#13457,#13458));+#13454=ORIENTED_EDGE('',*,*,#13455,.T.);+#13455=EDGE_CURVE('',#5879,#5947,#13456,.T.);+#13456=LINE('',#5880,#780);+#13457=ORIENTED_EDGE('',*,*,#13445,.F.);+#13458=ORIENTED_EDGE('',*,*,#5883,.F.);+#13459=PLANE('',#13460);+#13460=AXIS2_PLACEMENT_3D('',#5880,#719,#13);+#13461=ADVANCED_FACE('',(#13462),#13469,.F.);+#13462=FACE_BOUND('',#13463,.F.);+#13463=EDGE_LOOP('',(#13464,#5945,#13467,#13468));+#13464=ORIENTED_EDGE('',*,*,#13465,.T.);+#13465=EDGE_CURVE('',#5872,#5940,#13466,.T.);+#13466=LINE('',#5873,#780);+#13467=ORIENTED_EDGE('',*,*,#13455,.F.);+#13468=ORIENTED_EDGE('',*,*,#5878,.F.);+#13469=PLANE('',#13470);+#13470=AXIS2_PLACEMENT_3D('',#5873,#13,#769);+#13471=ADVANCED_FACE('',(#13472),#13479,.T.);+#13472=FACE_BOUND('',#13473,.F.);+#13473=EDGE_LOOP('',(#13474,#5938,#13477,#13478));+#13474=ORIENTED_EDGE('',*,*,#13475,.T.);+#13475=EDGE_CURVE('',#5867,#5935,#13476,.T.);+#13476=LINE('',#5868,#780);+#13477=ORIENTED_EDGE('',*,*,#13465,.F.);+#13478=ORIENTED_EDGE('',*,*,#5871,.F.);+#13479=CYLINDRICAL_SURFACE('',#13480,0.25);+#13480=AXIS2_PLACEMENT_3D('',#5876,#3673,#3613);+#13481=ADVANCED_FACE('',(#13482),#13487,.F.);+#13482=FACE_BOUND('',#13483,.F.);+#13483=EDGE_LOOP('',(#13484,#5933,#13485,#13486));+#13484=ORIENTED_EDGE('',*,*,#5925,.T.);+#13485=ORIENTED_EDGE('',*,*,#13475,.F.);+#13486=ORIENTED_EDGE('',*,*,#5866,.F.);+#13487=PLANE('',#13488);+#13488=AXIS2_PLACEMENT_3D('',#5861,#12240,#3604);+#13489=ADVANCED_FACE('',(#13490),#13497,.T.);+#13490=FACE_BOUND('',#13491,.F.);+#13491=EDGE_LOOP('',(#13492,#6112,#13495,#13496));+#13492=ORIENTED_EDGE('',*,*,#13493,.T.);+#13493=EDGE_CURVE('',#6041,#6109,#13494,.T.);+#13494=LINE('',#6042,#780);+#13495=ORIENTED_EDGE('',*,*,#11650,.F.);+#13496=ORIENTED_EDGE('',*,*,#6045,.F.);+#13497=CYLINDRICAL_SURFACE('',#13498,0.25);+#13498=AXIS2_PLACEMENT_3D('',#6005,#3673,#3650);+#13499=ADVANCED_FACE('',(#13500),#13507,.F.);+#13500=FACE_BOUND('',#13501,.F.);+#13501=EDGE_LOOP('',(#13502,#6107,#13505,#13506));+#13502=ORIENTED_EDGE('',*,*,#13503,.T.);+#13503=EDGE_CURVE('',#6035,#6103,#13504,.T.);+#13504=LINE('',#6036,#780);+#13505=ORIENTED_EDGE('',*,*,#13493,.F.);+#13506=ORIENTED_EDGE('',*,*,#6040,.F.);+#13507=PLANE('',#13508);+#13508=AXIS2_PLACEMENT_3D('',#6036,#12181,#3643);+#13509=ADVANCED_FACE('',(#13510),#13517,.F.);+#13510=FACE_BOUND('',#13511,.F.);+#13511=EDGE_LOOP('',(#13512,#6101,#13515,#13516));+#13512=ORIENTED_EDGE('',*,*,#13513,.T.);+#13513=EDGE_CURVE('',#6030,#6098,#13514,.T.);+#13514=LINE('',#6031,#780);+#13515=ORIENTED_EDGE('',*,*,#13503,.F.);+#13516=ORIENTED_EDGE('',*,*,#6034,.F.);+#13517=CYLINDRICAL_SURFACE('',#13518,0.1);+#13518=AXIS2_PLACEMENT_3D('',#6017,#3673,#3636);+#13519=ADVANCED_FACE('',(#13520),#13527,.F.);+#13520=FACE_BOUND('',#13521,.F.);+#13521=EDGE_LOOP('',(#13522,#6096,#13525,#13526));+#13522=ORIENTED_EDGE('',*,*,#13523,.T.);+#13523=EDGE_CURVE('',#6025,#6093,#13524,.T.);+#13524=LINE('',#6026,#780);+#13525=ORIENTED_EDGE('',*,*,#13513,.F.);+#13526=ORIENTED_EDGE('',*,*,#6029,.F.);+#13527=PLANE('',#13528);+#13528=AXIS2_PLACEMENT_3D('',#6026,#3014,#719);+#13529=ADVANCED_FACE('',(#13530),#13537,.F.);+#13530=FACE_BOUND('',#13531,.F.);+#13531=EDGE_LOOP('',(#13532,#6091,#13535,#13536));+#13532=ORIENTED_EDGE('',*,*,#13533,.T.);+#13533=EDGE_CURVE('',#6020,#6088,#13534,.T.);+#13534=LINE('',#6021,#780);+#13535=ORIENTED_EDGE('',*,*,#13523,.F.);+#13536=ORIENTED_EDGE('',*,*,#6024,.F.);+#13537=PLANE('',#13538);+#13538=AXIS2_PLACEMENT_3D('',#6021,#719,#13);+#13539=ADVANCED_FACE('',(#13540),#13547,.F.);+#13540=FACE_BOUND('',#13541,.F.);+#13541=EDGE_LOOP('',(#13542,#6086,#13545,#13546));+#13542=ORIENTED_EDGE('',*,*,#13543,.T.);+#13543=EDGE_CURVE('',#6013,#6081,#13544,.T.);+#13544=LINE('',#6014,#780);+#13545=ORIENTED_EDGE('',*,*,#13533,.F.);+#13546=ORIENTED_EDGE('',*,*,#6019,.F.);+#13547=PLANE('',#13548);+#13548=AXIS2_PLACEMENT_3D('',#6014,#13,#769);+#13549=ADVANCED_FACE('',(#13550),#13557,.T.);+#13550=FACE_BOUND('',#13551,.F.);+#13551=EDGE_LOOP('',(#13552,#6079,#13555,#13556));+#13552=ORIENTED_EDGE('',*,*,#13553,.T.);+#13553=EDGE_CURVE('',#6008,#6076,#13554,.T.);+#13554=LINE('',#6009,#780);+#13555=ORIENTED_EDGE('',*,*,#13543,.F.);+#13556=ORIENTED_EDGE('',*,*,#6012,.F.);+#13557=CYLINDRICAL_SURFACE('',#13558,0.25);+#13558=AXIS2_PLACEMENT_3D('',#6017,#3673,#3613);+#13559=ADVANCED_FACE('',(#13560),#13565,.F.);+#13560=FACE_BOUND('',#13561,.F.);+#13561=EDGE_LOOP('',(#13562,#6074,#13563,#13564));+#13562=ORIENTED_EDGE('',*,*,#6066,.T.);+#13563=ORIENTED_EDGE('',*,*,#13553,.F.);+#13564=ORIENTED_EDGE('',*,*,#6007,.F.);+#13565=PLANE('',#13566);+#13566=AXIS2_PLACEMENT_3D('',#6002,#12240,#3604);+#13567=ADVANCED_FACE('',(#13568),#13575,.T.);+#13568=FACE_BOUND('',#13569,.F.);+#13569=EDGE_LOOP('',(#13570,#6253,#13573,#13574));+#13570=ORIENTED_EDGE('',*,*,#13571,.T.);+#13571=EDGE_CURVE('',#6182,#6250,#13572,.T.);+#13572=LINE('',#6183,#780);+#13573=ORIENTED_EDGE('',*,*,#11662,.F.);+#13574=ORIENTED_EDGE('',*,*,#6186,.F.);+#13575=CYLINDRICAL_SURFACE('',#13576,0.25);+#13576=AXIS2_PLACEMENT_3D('',#6146,#3673,#3650);+#13577=ADVANCED_FACE('',(#13578),#13585,.F.);+#13578=FACE_BOUND('',#13579,.F.);+#13579=EDGE_LOOP('',(#13580,#6248,#13583,#13584));+#13580=ORIENTED_EDGE('',*,*,#13581,.T.);+#13581=EDGE_CURVE('',#6176,#6244,#13582,.T.);+#13582=LINE('',#6177,#780);+#13583=ORIENTED_EDGE('',*,*,#13571,.F.);+#13584=ORIENTED_EDGE('',*,*,#6181,.F.);+#13585=PLANE('',#13586);+#13586=AXIS2_PLACEMENT_3D('',#6177,#12181,#3643);+#13587=ADVANCED_FACE('',(#13588),#13595,.F.);+#13588=FACE_BOUND('',#13589,.F.);+#13589=EDGE_LOOP('',(#13590,#6242,#13593,#13594));+#13590=ORIENTED_EDGE('',*,*,#13591,.T.);+#13591=EDGE_CURVE('',#6171,#6239,#13592,.T.);+#13592=LINE('',#6172,#780);+#13593=ORIENTED_EDGE('',*,*,#13581,.F.);+#13594=ORIENTED_EDGE('',*,*,#6175,.F.);+#13595=CYLINDRICAL_SURFACE('',#13596,0.1);+#13596=AXIS2_PLACEMENT_3D('',#6158,#3673,#3636);+#13597=ADVANCED_FACE('',(#13598),#13605,.F.);+#13598=FACE_BOUND('',#13599,.F.);+#13599=EDGE_LOOP('',(#13600,#6237,#13603,#13604));+#13600=ORIENTED_EDGE('',*,*,#13601,.T.);+#13601=EDGE_CURVE('',#6166,#6234,#13602,.T.);+#13602=LINE('',#6167,#780);+#13603=ORIENTED_EDGE('',*,*,#13591,.F.);+#13604=ORIENTED_EDGE('',*,*,#6170,.F.);+#13605=PLANE('',#13606);+#13606=AXIS2_PLACEMENT_3D('',#6167,#3014,#719);+#13607=ADVANCED_FACE('',(#13608),#13615,.F.);+#13608=FACE_BOUND('',#13609,.F.);+#13609=EDGE_LOOP('',(#13610,#6232,#13613,#13614));+#13610=ORIENTED_EDGE('',*,*,#13611,.T.);+#13611=EDGE_CURVE('',#6161,#6229,#13612,.T.);+#13612=LINE('',#6162,#780);+#13613=ORIENTED_EDGE('',*,*,#13601,.F.);+#13614=ORIENTED_EDGE('',*,*,#6165,.F.);+#13615=PLANE('',#13616);+#13616=AXIS2_PLACEMENT_3D('',#6162,#719,#13);+#13617=ADVANCED_FACE('',(#13618),#13625,.F.);+#13618=FACE_BOUND('',#13619,.F.);+#13619=EDGE_LOOP('',(#13620,#6227,#13623,#13624));+#13620=ORIENTED_EDGE('',*,*,#13621,.T.);+#13621=EDGE_CURVE('',#6154,#6222,#13622,.T.);+#13622=LINE('',#6155,#780);+#13623=ORIENTED_EDGE('',*,*,#13611,.F.);+#13624=ORIENTED_EDGE('',*,*,#6160,.F.);+#13625=PLANE('',#13626);+#13626=AXIS2_PLACEMENT_3D('',#6155,#13,#769);+#13627=ADVANCED_FACE('',(#13628),#13635,.T.);+#13628=FACE_BOUND('',#13629,.F.);+#13629=EDGE_LOOP('',(#13630,#6220,#13633,#13634));+#13630=ORIENTED_EDGE('',*,*,#13631,.T.);+#13631=EDGE_CURVE('',#6149,#6217,#13632,.T.);+#13632=LINE('',#6150,#780);+#13633=ORIENTED_EDGE('',*,*,#13621,.F.);+#13634=ORIENTED_EDGE('',*,*,#6153,.F.);+#13635=CYLINDRICAL_SURFACE('',#13636,0.25);+#13636=AXIS2_PLACEMENT_3D('',#6158,#3673,#3613);+#13637=ADVANCED_FACE('',(#13638),#13643,.F.);+#13638=FACE_BOUND('',#13639,.F.);+#13639=EDGE_LOOP('',(#13640,#6215,#13641,#13642));+#13640=ORIENTED_EDGE('',*,*,#6207,.T.);+#13641=ORIENTED_EDGE('',*,*,#13631,.F.);+#13642=ORIENTED_EDGE('',*,*,#6148,.F.);+#13643=PLANE('',#13644);+#13644=AXIS2_PLACEMENT_3D('',#6143,#12240,#3604);+#13645=ADVANCED_FACE('',(#13646),#13653,.T.);+#13646=FACE_BOUND('',#13647,.F.);+#13647=EDGE_LOOP('',(#13648,#6394,#13651,#13652));+#13648=ORIENTED_EDGE('',*,*,#13649,.T.);+#13649=EDGE_CURVE('',#6323,#6391,#13650,.T.);+#13650=LINE('',#6324,#780);+#13651=ORIENTED_EDGE('',*,*,#11674,.F.);+#13652=ORIENTED_EDGE('',*,*,#6327,.F.);+#13653=CYLINDRICAL_SURFACE('',#13654,0.25);+#13654=AXIS2_PLACEMENT_3D('',#6287,#3673,#3650);+#13655=ADVANCED_FACE('',(#13656),#13663,.F.);+#13656=FACE_BOUND('',#13657,.F.);+#13657=EDGE_LOOP('',(#13658,#6389,#13661,#13662));+#13658=ORIENTED_EDGE('',*,*,#13659,.T.);+#13659=EDGE_CURVE('',#6317,#6385,#13660,.T.);+#13660=LINE('',#6318,#780);+#13661=ORIENTED_EDGE('',*,*,#13649,.F.);+#13662=ORIENTED_EDGE('',*,*,#6322,.F.);+#13663=PLANE('',#13664);+#13664=AXIS2_PLACEMENT_3D('',#6318,#12181,#3643);+#13665=ADVANCED_FACE('',(#13666),#13673,.F.);+#13666=FACE_BOUND('',#13667,.F.);+#13667=EDGE_LOOP('',(#13668,#6383,#13671,#13672));+#13668=ORIENTED_EDGE('',*,*,#13669,.T.);+#13669=EDGE_CURVE('',#6312,#6380,#13670,.T.);+#13670=LINE('',#6313,#780);+#13671=ORIENTED_EDGE('',*,*,#13659,.F.);+#13672=ORIENTED_EDGE('',*,*,#6316,.F.);+#13673=CYLINDRICAL_SURFACE('',#13674,0.1);+#13674=AXIS2_PLACEMENT_3D('',#6299,#3673,#3636);+#13675=ADVANCED_FACE('',(#13676),#13683,.F.);+#13676=FACE_BOUND('',#13677,.F.);+#13677=EDGE_LOOP('',(#13678,#6378,#13681,#13682));+#13678=ORIENTED_EDGE('',*,*,#13679,.T.);+#13679=EDGE_CURVE('',#6307,#6375,#13680,.T.);+#13680=LINE('',#6308,#780);+#13681=ORIENTED_EDGE('',*,*,#13669,.F.);+#13682=ORIENTED_EDGE('',*,*,#6311,.F.);+#13683=PLANE('',#13684);+#13684=AXIS2_PLACEMENT_3D('',#6308,#3014,#719);+#13685=ADVANCED_FACE('',(#13686),#13693,.F.);+#13686=FACE_BOUND('',#13687,.F.);+#13687=EDGE_LOOP('',(#13688,#6373,#13691,#13692));+#13688=ORIENTED_EDGE('',*,*,#13689,.T.);+#13689=EDGE_CURVE('',#6302,#6370,#13690,.T.);+#13690=LINE('',#6303,#780);+#13691=ORIENTED_EDGE('',*,*,#13679,.F.);+#13692=ORIENTED_EDGE('',*,*,#6306,.F.);+#13693=PLANE('',#13694);+#13694=AXIS2_PLACEMENT_3D('',#6303,#719,#13);+#13695=ADVANCED_FACE('',(#13696),#13703,.F.);+#13696=FACE_BOUND('',#13697,.F.);+#13697=EDGE_LOOP('',(#13698,#6368,#13701,#13702));+#13698=ORIENTED_EDGE('',*,*,#13699,.T.);+#13699=EDGE_CURVE('',#6295,#6363,#13700,.T.);+#13700=LINE('',#6296,#780);+#13701=ORIENTED_EDGE('',*,*,#13689,.F.);+#13702=ORIENTED_EDGE('',*,*,#6301,.F.);+#13703=PLANE('',#13704);+#13704=AXIS2_PLACEMENT_3D('',#6296,#13,#769);+#13705=ADVANCED_FACE('',(#13706),#13713,.T.);+#13706=FACE_BOUND('',#13707,.F.);+#13707=EDGE_LOOP('',(#13708,#6361,#13711,#13712));+#13708=ORIENTED_EDGE('',*,*,#13709,.T.);+#13709=EDGE_CURVE('',#6290,#6358,#13710,.T.);+#13710=LINE('',#6291,#780);+#13711=ORIENTED_EDGE('',*,*,#13699,.F.);+#13712=ORIENTED_EDGE('',*,*,#6294,.F.);+#13713=CYLINDRICAL_SURFACE('',#13714,0.25);+#13714=AXIS2_PLACEMENT_3D('',#6299,#3673,#3613);+#13715=ADVANCED_FACE('',(#13716),#13721,.F.);+#13716=FACE_BOUND('',#13717,.F.);+#13717=EDGE_LOOP('',(#13718,#6356,#13719,#13720));+#13718=ORIENTED_EDGE('',*,*,#6348,.T.);+#13719=ORIENTED_EDGE('',*,*,#13709,.F.);+#13720=ORIENTED_EDGE('',*,*,#6289,.F.);+#13721=PLANE('',#13722);+#13722=AXIS2_PLACEMENT_3D('',#6284,#12240,#3604);+#13723=ADVANCED_FACE('',(#13724),#13731,.T.);+#13724=FACE_BOUND('',#13725,.F.);+#13725=EDGE_LOOP('',(#13726,#6535,#13729,#13730));+#13726=ORIENTED_EDGE('',*,*,#13727,.T.);+#13727=EDGE_CURVE('',#6464,#6532,#13728,.T.);+#13728=LINE('',#6465,#780);+#13729=ORIENTED_EDGE('',*,*,#11686,.F.);+#13730=ORIENTED_EDGE('',*,*,#6468,.F.);+#13731=CYLINDRICAL_SURFACE('',#13732,0.25);+#13732=AXIS2_PLACEMENT_3D('',#6428,#3673,#3650);+#13733=ADVANCED_FACE('',(#13734),#13741,.F.);+#13734=FACE_BOUND('',#13735,.F.);+#13735=EDGE_LOOP('',(#13736,#6530,#13739,#13740));+#13736=ORIENTED_EDGE('',*,*,#13737,.T.);+#13737=EDGE_CURVE('',#6458,#6526,#13738,.T.);+#13738=LINE('',#6459,#780);+#13739=ORIENTED_EDGE('',*,*,#13727,.F.);+#13740=ORIENTED_EDGE('',*,*,#6463,.F.);+#13741=PLANE('',#13742);+#13742=AXIS2_PLACEMENT_3D('',#6459,#12181,#3643);+#13743=ADVANCED_FACE('',(#13744),#13751,.F.);+#13744=FACE_BOUND('',#13745,.F.);+#13745=EDGE_LOOP('',(#13746,#6524,#13749,#13750));+#13746=ORIENTED_EDGE('',*,*,#13747,.T.);+#13747=EDGE_CURVE('',#6453,#6521,#13748,.T.);+#13748=LINE('',#6454,#780);+#13749=ORIENTED_EDGE('',*,*,#13737,.F.);+#13750=ORIENTED_EDGE('',*,*,#6457,.F.);+#13751=CYLINDRICAL_SURFACE('',#13752,0.1);+#13752=AXIS2_PLACEMENT_3D('',#6440,#3673,#3636);+#13753=ADVANCED_FACE('',(#13754),#13761,.F.);+#13754=FACE_BOUND('',#13755,.F.);+#13755=EDGE_LOOP('',(#13756,#6519,#13759,#13760));+#13756=ORIENTED_EDGE('',*,*,#13757,.T.);+#13757=EDGE_CURVE('',#6448,#6516,#13758,.T.);+#13758=LINE('',#6449,#780);+#13759=ORIENTED_EDGE('',*,*,#13747,.F.);+#13760=ORIENTED_EDGE('',*,*,#6452,.F.);+#13761=PLANE('',#13762);+#13762=AXIS2_PLACEMENT_3D('',#6449,#3014,#719);+#13763=ADVANCED_FACE('',(#13764),#13771,.F.);+#13764=FACE_BOUND('',#13765,.F.);+#13765=EDGE_LOOP('',(#13766,#6514,#13769,#13770));+#13766=ORIENTED_EDGE('',*,*,#13767,.T.);+#13767=EDGE_CURVE('',#6443,#6511,#13768,.T.);+#13768=LINE('',#6444,#780);+#13769=ORIENTED_EDGE('',*,*,#13757,.F.);+#13770=ORIENTED_EDGE('',*,*,#6447,.F.);+#13771=PLANE('',#13772);+#13772=AXIS2_PLACEMENT_3D('',#6444,#719,#13);+#13773=ADVANCED_FACE('',(#13774),#13781,.F.);+#13774=FACE_BOUND('',#13775,.F.);+#13775=EDGE_LOOP('',(#13776,#6509,#13779,#13780));+#13776=ORIENTED_EDGE('',*,*,#13777,.T.);+#13777=EDGE_CURVE('',#6436,#6504,#13778,.T.);+#13778=LINE('',#6437,#780);+#13779=ORIENTED_EDGE('',*,*,#13767,.F.);+#13780=ORIENTED_EDGE('',*,*,#6442,.F.);+#13781=PLANE('',#13782);+#13782=AXIS2_PLACEMENT_3D('',#6437,#13,#769);+#13783=ADVANCED_FACE('',(#13784),#13791,.T.);+#13784=FACE_BOUND('',#13785,.F.);+#13785=EDGE_LOOP('',(#13786,#6502,#13789,#13790));+#13786=ORIENTED_EDGE('',*,*,#13787,.T.);+#13787=EDGE_CURVE('',#6431,#6499,#13788,.T.);+#13788=LINE('',#6432,#780);+#13789=ORIENTED_EDGE('',*,*,#13777,.F.);+#13790=ORIENTED_EDGE('',*,*,#6435,.F.);+#13791=CYLINDRICAL_SURFACE('',#13792,0.25);+#13792=AXIS2_PLACEMENT_3D('',#6440,#3673,#3613);+#13793=ADVANCED_FACE('',(#13794),#13799,.F.);+#13794=FACE_BOUND('',#13795,.F.);+#13795=EDGE_LOOP('',(#13796,#6497,#13797,#13798));+#13796=ORIENTED_EDGE('',*,*,#6489,.T.);+#13797=ORIENTED_EDGE('',*,*,#13787,.F.);+#13798=ORIENTED_EDGE('',*,*,#6430,.F.);+#13799=PLANE('',#13800);+#13800=AXIS2_PLACEMENT_3D('',#6425,#12240,#3604);+#13801=ADVANCED_FACE('',(#13802),#13809,.T.);+#13802=FACE_BOUND('',#13803,.F.);+#13803=EDGE_LOOP('',(#13804,#6676,#13807,#13808));+#13804=ORIENTED_EDGE('',*,*,#13805,.T.);+#13805=EDGE_CURVE('',#6605,#6673,#13806,.T.);+#13806=LINE('',#6606,#780);+#13807=ORIENTED_EDGE('',*,*,#11698,.F.);+#13808=ORIENTED_EDGE('',*,*,#6609,.F.);+#13809=CYLINDRICAL_SURFACE('',#13810,0.25);+#13810=AXIS2_PLACEMENT_3D('',#6569,#3673,#3650);+#13811=ADVANCED_FACE('',(#13812),#13819,.F.);+#13812=FACE_BOUND('',#13813,.F.);+#13813=EDGE_LOOP('',(#13814,#6671,#13817,#13818));+#13814=ORIENTED_EDGE('',*,*,#13815,.T.);+#13815=EDGE_CURVE('',#6599,#6667,#13816,.T.);+#13816=LINE('',#6600,#780);+#13817=ORIENTED_EDGE('',*,*,#13805,.F.);+#13818=ORIENTED_EDGE('',*,*,#6604,.F.);+#13819=PLANE('',#13820);+#13820=AXIS2_PLACEMENT_3D('',#6600,#12181,#3643);+#13821=ADVANCED_FACE('',(#13822),#13829,.F.);+#13822=FACE_BOUND('',#13823,.F.);+#13823=EDGE_LOOP('',(#13824,#6665,#13827,#13828));+#13824=ORIENTED_EDGE('',*,*,#13825,.T.);+#13825=EDGE_CURVE('',#6594,#6662,#13826,.T.);+#13826=LINE('',#6595,#780);+#13827=ORIENTED_EDGE('',*,*,#13815,.F.);+#13828=ORIENTED_EDGE('',*,*,#6598,.F.);+#13829=CYLINDRICAL_SURFACE('',#13830,0.1);+#13830=AXIS2_PLACEMENT_3D('',#6581,#3673,#3636);+#13831=ADVANCED_FACE('',(#13832),#13839,.F.);+#13832=FACE_BOUND('',#13833,.F.);+#13833=EDGE_LOOP('',(#13834,#6660,#13837,#13838));+#13834=ORIENTED_EDGE('',*,*,#13835,.T.);+#13835=EDGE_CURVE('',#6589,#6657,#13836,.T.);+#13836=LINE('',#6590,#780);+#13837=ORIENTED_EDGE('',*,*,#13825,.F.);+#13838=ORIENTED_EDGE('',*,*,#6593,.F.);+#13839=PLANE('',#13840);+#13840=AXIS2_PLACEMENT_3D('',#6590,#3014,#719);+#13841=ADVANCED_FACE('',(#13842),#13849,.F.);+#13842=FACE_BOUND('',#13843,.F.);+#13843=EDGE_LOOP('',(#13844,#6655,#13847,#13848));+#13844=ORIENTED_EDGE('',*,*,#13845,.T.);+#13845=EDGE_CURVE('',#6584,#6652,#13846,.T.);+#13846=LINE('',#6585,#780);+#13847=ORIENTED_EDGE('',*,*,#13835,.F.);+#13848=ORIENTED_EDGE('',*,*,#6588,.F.);+#13849=PLANE('',#13850);+#13850=AXIS2_PLACEMENT_3D('',#6585,#719,#13);+#13851=ADVANCED_FACE('',(#13852),#13859,.F.);+#13852=FACE_BOUND('',#13853,.F.);+#13853=EDGE_LOOP('',(#13854,#6650,#13857,#13858));+#13854=ORIENTED_EDGE('',*,*,#13855,.T.);+#13855=EDGE_CURVE('',#6577,#6645,#13856,.T.);+#13856=LINE('',#6578,#780);+#13857=ORIENTED_EDGE('',*,*,#13845,.F.);+#13858=ORIENTED_EDGE('',*,*,#6583,.F.);+#13859=PLANE('',#13860);+#13860=AXIS2_PLACEMENT_3D('',#6578,#13,#769);+#13861=ADVANCED_FACE('',(#13862),#13869,.T.);+#13862=FACE_BOUND('',#13863,.F.);+#13863=EDGE_LOOP('',(#13864,#6643,#13867,#13868));+#13864=ORIENTED_EDGE('',*,*,#13865,.T.);+#13865=EDGE_CURVE('',#6572,#6640,#13866,.T.);+#13866=LINE('',#6573,#780);+#13867=ORIENTED_EDGE('',*,*,#13855,.F.);+#13868=ORIENTED_EDGE('',*,*,#6576,.F.);+#13869=CYLINDRICAL_SURFACE('',#13870,0.25);+#13870=AXIS2_PLACEMENT_3D('',#6581,#3673,#3613);+#13871=ADVANCED_FACE('',(#13872),#13877,.F.);+#13872=FACE_BOUND('',#13873,.F.);+#13873=EDGE_LOOP('',(#13874,#6638,#13875,#13876));+#13874=ORIENTED_EDGE('',*,*,#6630,.T.);+#13875=ORIENTED_EDGE('',*,*,#13865,.F.);+#13876=ORIENTED_EDGE('',*,*,#6571,.F.);+#13877=PLANE('',#13878);+#13878=AXIS2_PLACEMENT_3D('',#6566,#12240,#3604);+#13879=ADVANCED_FACE('',(#13880),#13887,.T.);+#13880=FACE_BOUND('',#13881,.F.);+#13881=EDGE_LOOP('',(#13882,#6817,#13885,#13886));+#13882=ORIENTED_EDGE('',*,*,#13883,.T.);+#13883=EDGE_CURVE('',#6746,#6814,#13884,.T.);+#13884=LINE('',#6747,#780);+#13885=ORIENTED_EDGE('',*,*,#11710,.F.);+#13886=ORIENTED_EDGE('',*,*,#6750,.F.);+#13887=CYLINDRICAL_SURFACE('',#13888,0.25);+#13888=AXIS2_PLACEMENT_3D('',#6710,#3673,#3650);+#13889=ADVANCED_FACE('',(#13890),#13897,.F.);+#13890=FACE_BOUND('',#13891,.F.);+#13891=EDGE_LOOP('',(#13892,#6812,#13895,#13896));+#13892=ORIENTED_EDGE('',*,*,#13893,.T.);+#13893=EDGE_CURVE('',#6740,#6808,#13894,.T.);+#13894=LINE('',#6741,#780);+#13895=ORIENTED_EDGE('',*,*,#13883,.F.);+#13896=ORIENTED_EDGE('',*,*,#6745,.F.);+#13897=PLANE('',#13898);+#13898=AXIS2_PLACEMENT_3D('',#6741,#12181,#3643);+#13899=ADVANCED_FACE('',(#13900),#13907,.F.);+#13900=FACE_BOUND('',#13901,.F.);+#13901=EDGE_LOOP('',(#13902,#6806,#13905,#13906));+#13902=ORIENTED_EDGE('',*,*,#13903,.T.);+#13903=EDGE_CURVE('',#6735,#6803,#13904,.T.);+#13904=LINE('',#6736,#780);+#13905=ORIENTED_EDGE('',*,*,#13893,.F.);+#13906=ORIENTED_EDGE('',*,*,#6739,.F.);+#13907=CYLINDRICAL_SURFACE('',#13908,0.1);+#13908=AXIS2_PLACEMENT_3D('',#6722,#3673,#3636);+#13909=ADVANCED_FACE('',(#13910),#13917,.F.);+#13910=FACE_BOUND('',#13911,.F.);+#13911=EDGE_LOOP('',(#13912,#6801,#13915,#13916));+#13912=ORIENTED_EDGE('',*,*,#13913,.T.);+#13913=EDGE_CURVE('',#6730,#6798,#13914,.T.);+#13914=LINE('',#6731,#780);+#13915=ORIENTED_EDGE('',*,*,#13903,.F.);+#13916=ORIENTED_EDGE('',*,*,#6734,.F.);+#13917=PLANE('',#13918);+#13918=AXIS2_PLACEMENT_3D('',#6731,#3014,#719);+#13919=ADVANCED_FACE('',(#13920),#13927,.F.);+#13920=FACE_BOUND('',#13921,.F.);+#13921=EDGE_LOOP('',(#13922,#6796,#13925,#13926));+#13922=ORIENTED_EDGE('',*,*,#13923,.T.);+#13923=EDGE_CURVE('',#6725,#6793,#13924,.T.);+#13924=LINE('',#6726,#780);+#13925=ORIENTED_EDGE('',*,*,#13913,.F.);+#13926=ORIENTED_EDGE('',*,*,#6729,.F.);+#13927=PLANE('',#13928);+#13928=AXIS2_PLACEMENT_3D('',#6726,#719,#13);+#13929=ADVANCED_FACE('',(#13930),#13937,.F.);+#13930=FACE_BOUND('',#13931,.F.);+#13931=EDGE_LOOP('',(#13932,#6791,#13935,#13936));+#13932=ORIENTED_EDGE('',*,*,#13933,.T.);+#13933=EDGE_CURVE('',#6718,#6786,#13934,.T.);+#13934=LINE('',#6719,#780);+#13935=ORIENTED_EDGE('',*,*,#13923,.F.);+#13936=ORIENTED_EDGE('',*,*,#6724,.F.);+#13937=PLANE('',#13938);+#13938=AXIS2_PLACEMENT_3D('',#6719,#13,#769);+#13939=ADVANCED_FACE('',(#13940),#13947,.T.);+#13940=FACE_BOUND('',#13941,.F.);+#13941=EDGE_LOOP('',(#13942,#6784,#13945,#13946));+#13942=ORIENTED_EDGE('',*,*,#13943,.T.);+#13943=EDGE_CURVE('',#6713,#6781,#13944,.T.);+#13944=LINE('',#6714,#780);+#13945=ORIENTED_EDGE('',*,*,#13933,.F.);+#13946=ORIENTED_EDGE('',*,*,#6717,.F.);+#13947=CYLINDRICAL_SURFACE('',#13948,0.25);+#13948=AXIS2_PLACEMENT_3D('',#6722,#3673,#3613);+#13949=ADVANCED_FACE('',(#13950),#13955,.F.);+#13950=FACE_BOUND('',#13951,.F.);+#13951=EDGE_LOOP('',(#13952,#6779,#13953,#13954));+#13952=ORIENTED_EDGE('',*,*,#6771,.T.);+#13953=ORIENTED_EDGE('',*,*,#13943,.F.);+#13954=ORIENTED_EDGE('',*,*,#6712,.F.);+#13955=PLANE('',#13956);+#13956=AXIS2_PLACEMENT_3D('',#6707,#12240,#3604);+#13957=ADVANCED_FACE('',(#13958),#13965,.T.);+#13958=FACE_BOUND('',#13959,.F.);+#13959=EDGE_LOOP('',(#13960,#6958,#13963,#13964));+#13960=ORIENTED_EDGE('',*,*,#13961,.T.);+#13961=EDGE_CURVE('',#6887,#6955,#13962,.T.);+#13962=LINE('',#6888,#780);+#13963=ORIENTED_EDGE('',*,*,#11722,.F.);+#13964=ORIENTED_EDGE('',*,*,#6891,.F.);+#13965=CYLINDRICAL_SURFACE('',#13966,0.25);+#13966=AXIS2_PLACEMENT_3D('',#6851,#3673,#3650);+#13967=ADVANCED_FACE('',(#13968),#13975,.F.);+#13968=FACE_BOUND('',#13969,.F.);+#13969=EDGE_LOOP('',(#13970,#6953,#13973,#13974));+#13970=ORIENTED_EDGE('',*,*,#13971,.T.);+#13971=EDGE_CURVE('',#6881,#6949,#13972,.T.);+#13972=LINE('',#6882,#780);+#13973=ORIENTED_EDGE('',*,*,#13961,.F.);+#13974=ORIENTED_EDGE('',*,*,#6886,.F.);+#13975=PLANE('',#13976);+#13976=AXIS2_PLACEMENT_3D('',#6882,#12181,#3643);+#13977=ADVANCED_FACE('',(#13978),#13985,.F.);+#13978=FACE_BOUND('',#13979,.F.);+#13979=EDGE_LOOP('',(#13980,#6947,#13983,#13984));+#13980=ORIENTED_EDGE('',*,*,#13981,.T.);+#13981=EDGE_CURVE('',#6876,#6944,#13982,.T.);+#13982=LINE('',#6877,#780);+#13983=ORIENTED_EDGE('',*,*,#13971,.F.);+#13984=ORIENTED_EDGE('',*,*,#6880,.F.);+#13985=CYLINDRICAL_SURFACE('',#13986,0.1);+#13986=AXIS2_PLACEMENT_3D('',#6863,#3673,#3636);+#13987=ADVANCED_FACE('',(#13988),#13995,.F.);+#13988=FACE_BOUND('',#13989,.F.);+#13989=EDGE_LOOP('',(#13990,#6942,#13993,#13994));+#13990=ORIENTED_EDGE('',*,*,#13991,.T.);+#13991=EDGE_CURVE('',#6871,#6939,#13992,.T.);+#13992=LINE('',#6872,#780);+#13993=ORIENTED_EDGE('',*,*,#13981,.F.);+#13994=ORIENTED_EDGE('',*,*,#6875,.F.);+#13995=PLANE('',#13996);+#13996=AXIS2_PLACEMENT_3D('',#6872,#3014,#719);+#13997=ADVANCED_FACE('',(#13998),#14005,.F.);+#13998=FACE_BOUND('',#13999,.F.);+#13999=EDGE_LOOP('',(#14000,#6937,#14003,#14004));+#14000=ORIENTED_EDGE('',*,*,#14001,.T.);+#14001=EDGE_CURVE('',#6866,#6934,#14002,.T.);+#14002=LINE('',#6867,#780);+#14003=ORIENTED_EDGE('',*,*,#13991,.F.);+#14004=ORIENTED_EDGE('',*,*,#6870,.F.);+#14005=PLANE('',#14006);+#14006=AXIS2_PLACEMENT_3D('',#6867,#719,#13);+#14007=ADVANCED_FACE('',(#14008),#14015,.F.);+#14008=FACE_BOUND('',#14009,.F.);+#14009=EDGE_LOOP('',(#14010,#6932,#14013,#14014));+#14010=ORIENTED_EDGE('',*,*,#14011,.T.);+#14011=EDGE_CURVE('',#6859,#6927,#14012,.T.);+#14012=LINE('',#6860,#780);+#14013=ORIENTED_EDGE('',*,*,#14001,.F.);+#14014=ORIENTED_EDGE('',*,*,#6865,.F.);+#14015=PLANE('',#14016);+#14016=AXIS2_PLACEMENT_3D('',#6860,#13,#769);+#14017=ADVANCED_FACE('',(#14018),#14025,.T.);+#14018=FACE_BOUND('',#14019,.F.);+#14019=EDGE_LOOP('',(#14020,#6925,#14023,#14024));+#14020=ORIENTED_EDGE('',*,*,#14021,.T.);+#14021=EDGE_CURVE('',#6854,#6922,#14022,.T.);+#14022=LINE('',#6855,#780);+#14023=ORIENTED_EDGE('',*,*,#14011,.F.);+#14024=ORIENTED_EDGE('',*,*,#6858,.F.);+#14025=CYLINDRICAL_SURFACE('',#14026,0.25);+#14026=AXIS2_PLACEMENT_3D('',#6863,#3673,#3613);+#14027=ADVANCED_FACE('',(#14028),#14033,.F.);+#14028=FACE_BOUND('',#14029,.F.);+#14029=EDGE_LOOP('',(#14030,#6920,#14031,#14032));+#14030=ORIENTED_EDGE('',*,*,#6912,.T.);+#14031=ORIENTED_EDGE('',*,*,#14021,.F.);+#14032=ORIENTED_EDGE('',*,*,#6853,.F.);+#14033=PLANE('',#14034);+#14034=AXIS2_PLACEMENT_3D('',#6848,#12240,#3604);+#14035=ADVANCED_FACE('',(#14036),#14043,.T.);+#14036=FACE_BOUND('',#14037,.F.);+#14037=EDGE_LOOP('',(#14038,#7099,#14041,#14042));+#14038=ORIENTED_EDGE('',*,*,#14039,.T.);+#14039=EDGE_CURVE('',#7028,#7096,#14040,.T.);+#14040=LINE('',#7029,#780);+#14041=ORIENTED_EDGE('',*,*,#11734,.F.);+#14042=ORIENTED_EDGE('',*,*,#7032,.F.);+#14043=CYLINDRICAL_SURFACE('',#14044,0.25);+#14044=AXIS2_PLACEMENT_3D('',#6992,#3673,#3650);+#14045=ADVANCED_FACE('',(#14046),#14053,.F.);+#14046=FACE_BOUND('',#14047,.F.);+#14047=EDGE_LOOP('',(#14048,#7094,#14051,#14052));+#14048=ORIENTED_EDGE('',*,*,#14049,.T.);+#14049=EDGE_CURVE('',#7022,#7090,#14050,.T.);+#14050=LINE('',#7023,#780);+#14051=ORIENTED_EDGE('',*,*,#14039,.F.);+#14052=ORIENTED_EDGE('',*,*,#7027,.F.);+#14053=PLANE('',#14054);+#14054=AXIS2_PLACEMENT_3D('',#7023,#12181,#3643);+#14055=ADVANCED_FACE('',(#14056),#14063,.F.);+#14056=FACE_BOUND('',#14057,.F.);+#14057=EDGE_LOOP('',(#14058,#7088,#14061,#14062));+#14058=ORIENTED_EDGE('',*,*,#14059,.T.);+#14059=EDGE_CURVE('',#7017,#7085,#14060,.T.);+#14060=LINE('',#7018,#780);+#14061=ORIENTED_EDGE('',*,*,#14049,.F.);+#14062=ORIENTED_EDGE('',*,*,#7021,.F.);+#14063=CYLINDRICAL_SURFACE('',#14064,0.1);+#14064=AXIS2_PLACEMENT_3D('',#7004,#3673,#3636);+#14065=ADVANCED_FACE('',(#14066),#14073,.F.);+#14066=FACE_BOUND('',#14067,.F.);+#14067=EDGE_LOOP('',(#14068,#7083,#14071,#14072));+#14068=ORIENTED_EDGE('',*,*,#14069,.T.);+#14069=EDGE_CURVE('',#7012,#7080,#14070,.T.);+#14070=LINE('',#7013,#780);+#14071=ORIENTED_EDGE('',*,*,#14059,.F.);+#14072=ORIENTED_EDGE('',*,*,#7016,.F.);+#14073=PLANE('',#14074);+#14074=AXIS2_PLACEMENT_3D('',#7013,#3014,#719);+#14075=ADVANCED_FACE('',(#14076),#14083,.F.);+#14076=FACE_BOUND('',#14077,.F.);+#14077=EDGE_LOOP('',(#14078,#7078,#14081,#14082));+#14078=ORIENTED_EDGE('',*,*,#14079,.T.);+#14079=EDGE_CURVE('',#7007,#7075,#14080,.T.);+#14080=LINE('',#7008,#780);+#14081=ORIENTED_EDGE('',*,*,#14069,.F.);+#14082=ORIENTED_EDGE('',*,*,#7011,.F.);+#14083=PLANE('',#14084);+#14084=AXIS2_PLACEMENT_3D('',#7008,#719,#13);+#14085=ADVANCED_FACE('',(#14086),#14093,.F.);+#14086=FACE_BOUND('',#14087,.F.);+#14087=EDGE_LOOP('',(#14088,#7073,#14091,#14092));+#14088=ORIENTED_EDGE('',*,*,#14089,.T.);+#14089=EDGE_CURVE('',#7000,#7068,#14090,.T.);+#14090=LINE('',#7001,#780);+#14091=ORIENTED_EDGE('',*,*,#14079,.F.);+#14092=ORIENTED_EDGE('',*,*,#7006,.F.);+#14093=PLANE('',#14094);+#14094=AXIS2_PLACEMENT_3D('',#7001,#13,#769);+#14095=ADVANCED_FACE('',(#14096),#14103,.T.);+#14096=FACE_BOUND('',#14097,.F.);+#14097=EDGE_LOOP('',(#14098,#7066,#14101,#14102));+#14098=ORIENTED_EDGE('',*,*,#14099,.T.);+#14099=EDGE_CURVE('',#6995,#7063,#14100,.T.);+#14100=LINE('',#6996,#780);+#14101=ORIENTED_EDGE('',*,*,#14089,.F.);+#14102=ORIENTED_EDGE('',*,*,#6999,.F.);+#14103=CYLINDRICAL_SURFACE('',#14104,0.25);+#14104=AXIS2_PLACEMENT_3D('',#7004,#3673,#3613);+#14105=ADVANCED_FACE('',(#14106),#14111,.F.);+#14106=FACE_BOUND('',#14107,.F.);+#14107=EDGE_LOOP('',(#14108,#7061,#14109,#14110));+#14108=ORIENTED_EDGE('',*,*,#7053,.T.);+#14109=ORIENTED_EDGE('',*,*,#14099,.F.);+#14110=ORIENTED_EDGE('',*,*,#6994,.F.);+#14111=PLANE('',#14112);+#14112=AXIS2_PLACEMENT_3D('',#6989,#12240,#3604);+#14113=ADVANCED_FACE('',(#14114),#14121,.T.);+#14114=FACE_BOUND('',#14115,.F.);+#14115=EDGE_LOOP('',(#14116,#7240,#14119,#14120));+#14116=ORIENTED_EDGE('',*,*,#14117,.T.);+#14117=EDGE_CURVE('',#7169,#7237,#14118,.T.);+#14118=LINE('',#7170,#780);+#14119=ORIENTED_EDGE('',*,*,#11746,.F.);+#14120=ORIENTED_EDGE('',*,*,#7173,.F.);+#14121=CYLINDRICAL_SURFACE('',#14122,0.25);+#14122=AXIS2_PLACEMENT_3D('',#7133,#3673,#3650);+#14123=ADVANCED_FACE('',(#14124),#14131,.F.);+#14124=FACE_BOUND('',#14125,.F.);+#14125=EDGE_LOOP('',(#14126,#7235,#14129,#14130));+#14126=ORIENTED_EDGE('',*,*,#14127,.T.);+#14127=EDGE_CURVE('',#7163,#7231,#14128,.T.);+#14128=LINE('',#7164,#780);+#14129=ORIENTED_EDGE('',*,*,#14117,.F.);+#14130=ORIENTED_EDGE('',*,*,#7168,.F.);+#14131=PLANE('',#14132);+#14132=AXIS2_PLACEMENT_3D('',#7164,#12181,#3643);+#14133=ADVANCED_FACE('',(#14134),#14141,.F.);+#14134=FACE_BOUND('',#14135,.F.);+#14135=EDGE_LOOP('',(#14136,#7229,#14139,#14140));+#14136=ORIENTED_EDGE('',*,*,#14137,.T.);+#14137=EDGE_CURVE('',#7158,#7226,#14138,.T.);+#14138=LINE('',#7159,#780);+#14139=ORIENTED_EDGE('',*,*,#14127,.F.);+#14140=ORIENTED_EDGE('',*,*,#7162,.F.);+#14141=CYLINDRICAL_SURFACE('',#14142,0.1);+#14142=AXIS2_PLACEMENT_3D('',#7145,#3673,#3636);+#14143=ADVANCED_FACE('',(#14144),#14151,.F.);+#14144=FACE_BOUND('',#14145,.F.);+#14145=EDGE_LOOP('',(#14146,#7224,#14149,#14150));+#14146=ORIENTED_EDGE('',*,*,#14147,.T.);+#14147=EDGE_CURVE('',#7153,#7221,#14148,.T.);+#14148=LINE('',#7154,#780);+#14149=ORIENTED_EDGE('',*,*,#14137,.F.);+#14150=ORIENTED_EDGE('',*,*,#7157,.F.);+#14151=PLANE('',#14152);+#14152=AXIS2_PLACEMENT_3D('',#7154,#3014,#719);+#14153=ADVANCED_FACE('',(#14154),#14161,.F.);+#14154=FACE_BOUND('',#14155,.F.);+#14155=EDGE_LOOP('',(#14156,#7219,#14159,#14160));+#14156=ORIENTED_EDGE('',*,*,#14157,.T.);+#14157=EDGE_CURVE('',#7148,#7216,#14158,.T.);+#14158=LINE('',#7149,#780);+#14159=ORIENTED_EDGE('',*,*,#14147,.F.);+#14160=ORIENTED_EDGE('',*,*,#7152,.F.);+#14161=PLANE('',#14162);+#14162=AXIS2_PLACEMENT_3D('',#7149,#719,#13);+#14163=ADVANCED_FACE('',(#14164),#14171,.F.);+#14164=FACE_BOUND('',#14165,.F.);+#14165=EDGE_LOOP('',(#14166,#7214,#14169,#14170));+#14166=ORIENTED_EDGE('',*,*,#14167,.T.);+#14167=EDGE_CURVE('',#7141,#7209,#14168,.T.);+#14168=LINE('',#7142,#780);+#14169=ORIENTED_EDGE('',*,*,#14157,.F.);+#14170=ORIENTED_EDGE('',*,*,#7147,.F.);+#14171=PLANE('',#14172);+#14172=AXIS2_PLACEMENT_3D('',#7142,#13,#769);+#14173=ADVANCED_FACE('',(#14174),#14181,.T.);+#14174=FACE_BOUND('',#14175,.F.);+#14175=EDGE_LOOP('',(#14176,#7207,#14179,#14180));+#14176=ORIENTED_EDGE('',*,*,#14177,.T.);+#14177=EDGE_CURVE('',#7136,#7204,#14178,.T.);+#14178=LINE('',#7137,#780);+#14179=ORIENTED_EDGE('',*,*,#14167,.F.);+#14180=ORIENTED_EDGE('',*,*,#7140,.F.);+#14181=CYLINDRICAL_SURFACE('',#14182,0.25);+#14182=AXIS2_PLACEMENT_3D('',#7145,#3673,#3613);+#14183=ADVANCED_FACE('',(#14184),#14189,.F.);+#14184=FACE_BOUND('',#14185,.F.);+#14185=EDGE_LOOP('',(#14186,#7202,#14187,#14188));+#14186=ORIENTED_EDGE('',*,*,#7194,.T.);+#14187=ORIENTED_EDGE('',*,*,#14177,.F.);+#14188=ORIENTED_EDGE('',*,*,#7135,.F.);+#14189=PLANE('',#14190);+#14190=AXIS2_PLACEMENT_3D('',#7130,#12240,#3604);+#14191=ADVANCED_FACE('',(#14192),#14199,.T.);+#14192=FACE_BOUND('',#14193,.F.);+#14193=EDGE_LOOP('',(#14194,#7381,#14197,#14198));+#14194=ORIENTED_EDGE('',*,*,#14195,.T.);+#14195=EDGE_CURVE('',#7310,#7378,#14196,.T.);+#14196=LINE('',#7311,#780);+#14197=ORIENTED_EDGE('',*,*,#11758,.F.);+#14198=ORIENTED_EDGE('',*,*,#7314,.F.);+#14199=CYLINDRICAL_SURFACE('',#14200,0.25);+#14200=AXIS2_PLACEMENT_3D('',#7274,#3673,#3650);+#14201=ADVANCED_FACE('',(#14202),#14209,.F.);+#14202=FACE_BOUND('',#14203,.F.);+#14203=EDGE_LOOP('',(#14204,#7376,#14207,#14208));+#14204=ORIENTED_EDGE('',*,*,#14205,.T.);+#14205=EDGE_CURVE('',#7304,#7372,#14206,.T.);+#14206=LINE('',#7305,#780);+#14207=ORIENTED_EDGE('',*,*,#14195,.F.);+#14208=ORIENTED_EDGE('',*,*,#7309,.F.);+#14209=PLANE('',#14210);+#14210=AXIS2_PLACEMENT_3D('',#7305,#12181,#3643);+#14211=ADVANCED_FACE('',(#14212),#14219,.F.);+#14212=FACE_BOUND('',#14213,.F.);+#14213=EDGE_LOOP('',(#14214,#7370,#14217,#14218));+#14214=ORIENTED_EDGE('',*,*,#14215,.T.);+#14215=EDGE_CURVE('',#7299,#7367,#14216,.T.);+#14216=LINE('',#7300,#780);+#14217=ORIENTED_EDGE('',*,*,#14205,.F.);+#14218=ORIENTED_EDGE('',*,*,#7303,.F.);+#14219=CYLINDRICAL_SURFACE('',#14220,0.1);+#14220=AXIS2_PLACEMENT_3D('',#7286,#3673,#3636);+#14221=ADVANCED_FACE('',(#14222),#14229,.F.);+#14222=FACE_BOUND('',#14223,.F.);+#14223=EDGE_LOOP('',(#14224,#7365,#14227,#14228));+#14224=ORIENTED_EDGE('',*,*,#14225,.T.);+#14225=EDGE_CURVE('',#7294,#7362,#14226,.T.);+#14226=LINE('',#7295,#780);+#14227=ORIENTED_EDGE('',*,*,#14215,.F.);+#14228=ORIENTED_EDGE('',*,*,#7298,.F.);+#14229=PLANE('',#14230);+#14230=AXIS2_PLACEMENT_3D('',#7295,#3014,#719);+#14231=ADVANCED_FACE('',(#14232),#14239,.F.);+#14232=FACE_BOUND('',#14233,.F.);+#14233=EDGE_LOOP('',(#14234,#7360,#14237,#14238));+#14234=ORIENTED_EDGE('',*,*,#14235,.T.);+#14235=EDGE_CURVE('',#7289,#7357,#14236,.T.);+#14236=LINE('',#7290,#780);+#14237=ORIENTED_EDGE('',*,*,#14225,.F.);+#14238=ORIENTED_EDGE('',*,*,#7293,.F.);+#14239=PLANE('',#14240);+#14240=AXIS2_PLACEMENT_3D('',#7290,#719,#13);+#14241=ADVANCED_FACE('',(#14242),#14249,.F.);+#14242=FACE_BOUND('',#14243,.F.);+#14243=EDGE_LOOP('',(#14244,#7355,#14247,#14248));+#14244=ORIENTED_EDGE('',*,*,#14245,.T.);+#14245=EDGE_CURVE('',#7282,#7350,#14246,.T.);+#14246=LINE('',#7283,#780);+#14247=ORIENTED_EDGE('',*,*,#14235,.F.);+#14248=ORIENTED_EDGE('',*,*,#7288,.F.);+#14249=PLANE('',#14250);+#14250=AXIS2_PLACEMENT_3D('',#7283,#13,#769);+#14251=ADVANCED_FACE('',(#14252),#14259,.T.);+#14252=FACE_BOUND('',#14253,.F.);+#14253=EDGE_LOOP('',(#14254,#7348,#14257,#14258));+#14254=ORIENTED_EDGE('',*,*,#14255,.T.);+#14255=EDGE_CURVE('',#7277,#7345,#14256,.T.);+#14256=LINE('',#7278,#780);+#14257=ORIENTED_EDGE('',*,*,#14245,.F.);+#14258=ORIENTED_EDGE('',*,*,#7281,.F.);+#14259=CYLINDRICAL_SURFACE('',#14260,0.25);+#14260=AXIS2_PLACEMENT_3D('',#7286,#3673,#3613);+#14261=ADVANCED_FACE('',(#14262),#14267,.F.);+#14262=FACE_BOUND('',#14263,.F.);+#14263=EDGE_LOOP('',(#14264,#7343,#14265,#14266));+#14264=ORIENTED_EDGE('',*,*,#7335,.T.);+#14265=ORIENTED_EDGE('',*,*,#14255,.F.);+#14266=ORIENTED_EDGE('',*,*,#7276,.F.);+#14267=PLANE('',#14268);+#14268=AXIS2_PLACEMENT_3D('',#7271,#12240,#3604);+#14269=ADVANCED_FACE('',(#14270),#14277,.F.);+#14270=FACE_BOUND('',#14271,.F.);+#14271=EDGE_LOOP('',(#14272,#7512,#14275,#14276));+#14272=ORIENTED_EDGE('',*,*,#14273,.T.);+#14273=EDGE_CURVE('',#7442,#7508,#14274,.T.);+#14274=LINE('',#7443,#780);+#14275=ORIENTED_EDGE('',*,*,#11435,.F.);+#14276=ORIENTED_EDGE('',*,*,#7447,.F.);+#14277=PLANE('',#14278);+#14278=AXIS2_PLACEMENT_3D('',#7443,#12181,#3643);+#14279=ADVANCED_FACE('',(#14280),#14287,.F.);+#14280=FACE_BOUND('',#14281,.F.);+#14281=EDGE_LOOP('',(#14282,#7506,#14285,#14286));+#14282=ORIENTED_EDGE('',*,*,#14283,.T.);+#14283=EDGE_CURVE('',#7437,#7503,#14284,.T.);+#14284=LINE('',#7438,#780);+#14285=ORIENTED_EDGE('',*,*,#14273,.F.);+#14286=ORIENTED_EDGE('',*,*,#7441,.F.);+#14287=CYLINDRICAL_SURFACE('',#14288,0.1);+#14288=AXIS2_PLACEMENT_3D('',#7424,#3673,#3636);+#14289=ADVANCED_FACE('',(#14290),#14297,.F.);+#14290=FACE_BOUND('',#14291,.F.);+#14291=EDGE_LOOP('',(#14292,#7501,#14295,#14296));+#14292=ORIENTED_EDGE('',*,*,#14293,.T.);+#14293=EDGE_CURVE('',#7432,#7498,#14294,.T.);+#14294=LINE('',#7433,#780);+#14295=ORIENTED_EDGE('',*,*,#14283,.F.);+#14296=ORIENTED_EDGE('',*,*,#7436,.F.);+#14297=PLANE('',#14298);+#14298=AXIS2_PLACEMENT_3D('',#7433,#3014,#719);+#14299=ADVANCED_FACE('',(#14300),#14307,.F.);+#14300=FACE_BOUND('',#14301,.F.);+#14301=EDGE_LOOP('',(#14302,#7496,#14305,#14306));+#14302=ORIENTED_EDGE('',*,*,#14303,.T.);+#14303=EDGE_CURVE('',#7427,#7493,#14304,.T.);+#14304=LINE('',#7428,#780);+#14305=ORIENTED_EDGE('',*,*,#14293,.F.);+#14306=ORIENTED_EDGE('',*,*,#7431,.F.);+#14307=PLANE('',#14308);+#14308=AXIS2_PLACEMENT_3D('',#7428,#719,#13);+#14309=ADVANCED_FACE('',(#14310),#14317,.F.);+#14310=FACE_BOUND('',#14311,.F.);+#14311=EDGE_LOOP('',(#14312,#7491,#14315,#14316));+#14312=ORIENTED_EDGE('',*,*,#14313,.T.);+#14313=EDGE_CURVE('',#7420,#7486,#14314,.T.);+#14314=LINE('',#7421,#780);+#14315=ORIENTED_EDGE('',*,*,#14303,.F.);+#14316=ORIENTED_EDGE('',*,*,#7426,.F.);+#14317=PLANE('',#14318);+#14318=AXIS2_PLACEMENT_3D('',#7421,#13,#769);+#14319=ADVANCED_FACE('',(#14320),#14327,.T.);+#14320=FACE_BOUND('',#14321,.F.);+#14321=EDGE_LOOP('',(#14322,#7484,#14325,#14326));+#14322=ORIENTED_EDGE('',*,*,#14323,.T.);+#14323=EDGE_CURVE('',#7415,#7481,#14324,.T.);+#14324=LINE('',#7416,#780);+#14325=ORIENTED_EDGE('',*,*,#14313,.F.);+#14326=ORIENTED_EDGE('',*,*,#7419,.F.);+#14327=CYLINDRICAL_SURFACE('',#14328,0.25);+#14328=AXIS2_PLACEMENT_3D('',#7424,#3673,#3613);+#14329=ADVANCED_FACE('',(#14330),#14335,.F.);+#14330=FACE_BOUND('',#14331,.F.);+#14331=EDGE_LOOP('',(#14332,#7479,#14333,#14334));+#14332=ORIENTED_EDGE('',*,*,#7471,.T.);+#14333=ORIENTED_EDGE('',*,*,#14323,.F.);+#14334=ORIENTED_EDGE('',*,*,#7414,.F.);+#14335=PLANE('',#14336);+#14336=AXIS2_PLACEMENT_3D('',#7409,#12240,#3604);+#14337=ADVANCED_FACE('',(#14338),#14345,.F.);+#14338=FACE_BOUND('',#14339,.F.);+#14339=EDGE_LOOP('',(#14340,#7642,#14343,#14344));+#14340=ORIENTED_EDGE('',*,*,#14341,.T.);+#14341=EDGE_CURVE('',#7569,#7638,#14342,.T.);+#14342=LINE('',#7570,#58);+#14343=ORIENTED_EDGE('',*,*,#12147,.F.);+#14344=ORIENTED_EDGE('',*,*,#7575,.F.);+#14345=PLANE('',#14346);+#14346=AXIS2_PLACEMENT_3D('',#7570,#14347,#7580);+#14347=DIRECTION('',(-0.988833015595,-1.097825181424E-16,-0.14902773993));+#14348=ADVANCED_FACE('',(#14349),#14356,.F.);+#14349=FACE_BOUND('',#14350,.F.);+#14350=EDGE_LOOP('',(#14351,#7636,#14354,#14355));+#14351=ORIENTED_EDGE('',*,*,#14352,.T.);+#14352=EDGE_CURVE('',#7564,#7633,#14353,.T.);+#14353=LINE('',#7565,#58);+#14354=ORIENTED_EDGE('',*,*,#14341,.F.);+#14355=ORIENTED_EDGE('',*,*,#7568,.F.);+#14356=CYLINDRICAL_SURFACE('',#7572,0.1);+#14357=ADVANCED_FACE('',(#14358),#14365,.F.);+#14358=FACE_BOUND('',#14359,.F.);+#14359=EDGE_LOOP('',(#14360,#7631,#14363,#14364));+#14360=ORIENTED_EDGE('',*,*,#14361,.T.);+#14361=EDGE_CURVE('',#7559,#7628,#14362,.T.);+#14362=LINE('',#7560,#58);+#14363=ORIENTED_EDGE('',*,*,#14352,.F.);+#14364=ORIENTED_EDGE('',*,*,#7563,.F.);+#14365=PLANE('',#14366);+#14366=AXIS2_PLACEMENT_3D('',#7560,#3014,#73);+#14367=ADVANCED_FACE('',(#14368),#14375,.F.);+#14368=FACE_BOUND('',#14369,.F.);+#14369=EDGE_LOOP('',(#14370,#7626,#14373,#14374));+#14370=ORIENTED_EDGE('',*,*,#14371,.T.);+#14371=EDGE_CURVE('',#7554,#7623,#14372,.T.);+#14372=LINE('',#7555,#58);+#14373=ORIENTED_EDGE('',*,*,#14361,.F.);+#14374=ORIENTED_EDGE('',*,*,#7558,.F.);+#14375=PLANE('',#14376);+#14376=AXIS2_PLACEMENT_3D('',#7555,#73,#13);+#14377=ADVANCED_FACE('',(#14378),#14385,.F.);+#14378=FACE_BOUND('',#14379,.F.);+#14379=EDGE_LOOP('',(#14380,#7621,#14383,#14384));+#14380=ORIENTED_EDGE('',*,*,#14381,.T.);+#14381=EDGE_CURVE('',#7546,#7616,#14382,.T.);+#14382=LINE('',#7547,#58);+#14383=ORIENTED_EDGE('',*,*,#14371,.F.);+#14384=ORIENTED_EDGE('',*,*,#7553,.F.);+#14385=PLANE('',#14386);+#14386=AXIS2_PLACEMENT_3D('',#7547,#13,#28);+#14387=ADVANCED_FACE('',(#14388),#14395,.T.);+#14388=FACE_BOUND('',#14389,.F.);+#14389=EDGE_LOOP('',(#14390,#7614,#14393,#14394));+#14390=ORIENTED_EDGE('',*,*,#14391,.T.);+#14391=EDGE_CURVE('',#7539,#7611,#14392,.T.);+#14392=LINE('',#7540,#58);+#14393=ORIENTED_EDGE('',*,*,#14381,.F.);+#14394=ORIENTED_EDGE('',*,*,#7545,.F.);+#14395=CYLINDRICAL_SURFACE('',#14396,0.25);+#14396=AXIS2_PLACEMENT_3D('',#7550,#87,#7551);+#14397=ADVANCED_FACE('',(#14398),#14403,.F.);+#14398=FACE_BOUND('',#14399,.F.);+#14399=EDGE_LOOP('',(#14400,#7609,#14401,#14402));+#14400=ORIENTED_EDGE('',*,*,#7602,.T.);+#14401=ORIENTED_EDGE('',*,*,#14391,.F.);+#14402=ORIENTED_EDGE('',*,*,#7538,.F.);+#14403=PLANE('',#14404);+#14404=AXIS2_PLACEMENT_3D('',#7532,#14405,#7543);+#14405=DIRECTION('',(0.988833015595,1.097825181424E-16,0.14902773993));+#14406=ADVANCED_FACE('',(#14407),#14414,.T.);+#14407=FACE_BOUND('',#14408,.F.);+#14408=EDGE_LOOP('',(#14409,#7781,#14412,#14413));+#14409=ORIENTED_EDGE('',*,*,#14410,.T.);+#14410=EDGE_CURVE('',#7711,#7778,#14411,.T.);+#14411=LINE('',#7712,#58);+#14412=ORIENTED_EDGE('',*,*,#11814,.F.);+#14413=ORIENTED_EDGE('',*,*,#7715,.F.);+#14414=CYLINDRICAL_SURFACE('',#14415,0.25);+#14415=AXIS2_PLACEMENT_3D('',#7675,#87,#7585);+#14416=ADVANCED_FACE('',(#14417),#14424,.F.);+#14417=FACE_BOUND('',#14418,.F.);+#14418=EDGE_LOOP('',(#14419,#7776,#14422,#14423));+#14419=ORIENTED_EDGE('',*,*,#14420,.T.);+#14420=EDGE_CURVE('',#7705,#7772,#14421,.T.);+#14421=LINE('',#7706,#58);+#14422=ORIENTED_EDGE('',*,*,#14410,.F.);+#14423=ORIENTED_EDGE('',*,*,#7710,.F.);+#14424=PLANE('',#14425);+#14425=AXIS2_PLACEMENT_3D('',#7706,#14347,#7580);+#14426=ADVANCED_FACE('',(#14427),#14434,.F.);+#14427=FACE_BOUND('',#14428,.F.);+#14428=EDGE_LOOP('',(#14429,#7770,#14432,#14433));+#14429=ORIENTED_EDGE('',*,*,#14430,.T.);+#14430=EDGE_CURVE('',#7700,#7767,#14431,.T.);+#14431=LINE('',#7701,#58);+#14432=ORIENTED_EDGE('',*,*,#14420,.F.);+#14433=ORIENTED_EDGE('',*,*,#7704,.F.);+#14434=CYLINDRICAL_SURFACE('',#7708,0.1);+#14435=ADVANCED_FACE('',(#14436),#14443,.F.);+#14436=FACE_BOUND('',#14437,.F.);+#14437=EDGE_LOOP('',(#14438,#7765,#14441,#14442));+#14438=ORIENTED_EDGE('',*,*,#14439,.T.);+#14439=EDGE_CURVE('',#7695,#7762,#14440,.T.);+#14440=LINE('',#7696,#58);+#14441=ORIENTED_EDGE('',*,*,#14430,.F.);+#14442=ORIENTED_EDGE('',*,*,#7699,.F.);+#14443=PLANE('',#14444);+#14444=AXIS2_PLACEMENT_3D('',#7696,#3014,#73);+#14445=ADVANCED_FACE('',(#14446),#14453,.F.);+#14446=FACE_BOUND('',#14447,.F.);+#14447=EDGE_LOOP('',(#14448,#7760,#14451,#14452));+#14448=ORIENTED_EDGE('',*,*,#14449,.T.);+#14449=EDGE_CURVE('',#7690,#7757,#14450,.T.);+#14450=LINE('',#7691,#58);+#14451=ORIENTED_EDGE('',*,*,#14439,.F.);+#14452=ORIENTED_EDGE('',*,*,#7694,.F.);+#14453=PLANE('',#14454);+#14454=AXIS2_PLACEMENT_3D('',#7691,#73,#13);+#14455=ADVANCED_FACE('',(#14456),#14463,.F.);+#14456=FACE_BOUND('',#14457,.F.);+#14457=EDGE_LOOP('',(#14458,#7755,#14461,#14462));+#14458=ORIENTED_EDGE('',*,*,#14459,.T.);+#14459=EDGE_CURVE('',#7683,#7750,#14460,.T.);+#14460=LINE('',#7684,#58);+#14461=ORIENTED_EDGE('',*,*,#14449,.F.);+#14462=ORIENTED_EDGE('',*,*,#7689,.F.);+#14463=PLANE('',#14464);+#14464=AXIS2_PLACEMENT_3D('',#7684,#13,#28);+#14465=ADVANCED_FACE('',(#14466),#14473,.T.);+#14466=FACE_BOUND('',#14467,.F.);+#14467=EDGE_LOOP('',(#14468,#7748,#14471,#14472));+#14468=ORIENTED_EDGE('',*,*,#14469,.T.);+#14469=EDGE_CURVE('',#7678,#7745,#14470,.T.);+#14470=LINE('',#7679,#58);+#14471=ORIENTED_EDGE('',*,*,#14459,.F.);+#14472=ORIENTED_EDGE('',*,*,#7682,.F.);+#14473=CYLINDRICAL_SURFACE('',#14474,0.25);+#14474=AXIS2_PLACEMENT_3D('',#7687,#87,#7551);+#14475=ADVANCED_FACE('',(#14476),#14481,.F.);+#14476=FACE_BOUND('',#14477,.F.);+#14477=EDGE_LOOP('',(#14478,#7743,#14479,#14480));+#14478=ORIENTED_EDGE('',*,*,#7736,.T.);+#14479=ORIENTED_EDGE('',*,*,#14469,.F.);+#14480=ORIENTED_EDGE('',*,*,#7677,.F.);+#14481=PLANE('',#14482);+#14482=AXIS2_PLACEMENT_3D('',#7672,#14405,#7543);+#14483=ADVANCED_FACE('',(#14484),#14491,.T.);+#14484=FACE_BOUND('',#14485,.F.);+#14485=EDGE_LOOP('',(#14486,#7921,#14489,#14490));+#14486=ORIENTED_EDGE('',*,*,#14487,.T.);+#14487=EDGE_CURVE('',#7851,#7918,#14488,.T.);+#14488=LINE('',#7852,#58);+#14489=ORIENTED_EDGE('',*,*,#11826,.F.);+#14490=ORIENTED_EDGE('',*,*,#7855,.F.);+#14491=CYLINDRICAL_SURFACE('',#14492,0.25);+#14492=AXIS2_PLACEMENT_3D('',#7815,#87,#7585);+#14493=ADVANCED_FACE('',(#14494),#14501,.F.);+#14494=FACE_BOUND('',#14495,.F.);+#14495=EDGE_LOOP('',(#14496,#7916,#14499,#14500));+#14496=ORIENTED_EDGE('',*,*,#14497,.T.);+#14497=EDGE_CURVE('',#7845,#7912,#14498,.T.);+#14498=LINE('',#7846,#58);+#14499=ORIENTED_EDGE('',*,*,#14487,.F.);+#14500=ORIENTED_EDGE('',*,*,#7850,.F.);+#14501=PLANE('',#14502);+#14502=AXIS2_PLACEMENT_3D('',#7846,#14347,#7580);+#14503=ADVANCED_FACE('',(#14504),#14511,.F.);+#14504=FACE_BOUND('',#14505,.F.);+#14505=EDGE_LOOP('',(#14506,#7910,#14509,#14510));+#14506=ORIENTED_EDGE('',*,*,#14507,.T.);+#14507=EDGE_CURVE('',#7840,#7907,#14508,.T.);+#14508=LINE('',#7841,#58);+#14509=ORIENTED_EDGE('',*,*,#14497,.F.);+#14510=ORIENTED_EDGE('',*,*,#7844,.F.);+#14511=CYLINDRICAL_SURFACE('',#7848,0.1);+#14512=ADVANCED_FACE('',(#14513),#14520,.F.);+#14513=FACE_BOUND('',#14514,.F.);+#14514=EDGE_LOOP('',(#14515,#7905,#14518,#14519));+#14515=ORIENTED_EDGE('',*,*,#14516,.T.);+#14516=EDGE_CURVE('',#7835,#7902,#14517,.T.);+#14517=LINE('',#7836,#58);+#14518=ORIENTED_EDGE('',*,*,#14507,.F.);+#14519=ORIENTED_EDGE('',*,*,#7839,.F.);+#14520=PLANE('',#14521);+#14521=AXIS2_PLACEMENT_3D('',#7836,#3014,#73);+#14522=ADVANCED_FACE('',(#14523),#14530,.F.);+#14523=FACE_BOUND('',#14524,.F.);+#14524=EDGE_LOOP('',(#14525,#7900,#14528,#14529));+#14525=ORIENTED_EDGE('',*,*,#14526,.T.);+#14526=EDGE_CURVE('',#7830,#7897,#14527,.T.);+#14527=LINE('',#7831,#58);+#14528=ORIENTED_EDGE('',*,*,#14516,.F.);+#14529=ORIENTED_EDGE('',*,*,#7834,.F.);+#14530=PLANE('',#14531);+#14531=AXIS2_PLACEMENT_3D('',#7831,#73,#13);+#14532=ADVANCED_FACE('',(#14533),#14540,.F.);+#14533=FACE_BOUND('',#14534,.F.);+#14534=EDGE_LOOP('',(#14535,#7895,#14538,#14539));+#14535=ORIENTED_EDGE('',*,*,#14536,.T.);+#14536=EDGE_CURVE('',#7823,#7890,#14537,.T.);+#14537=LINE('',#7824,#58);+#14538=ORIENTED_EDGE('',*,*,#14526,.F.);+#14539=ORIENTED_EDGE('',*,*,#7829,.F.);+#14540=PLANE('',#14541);+#14541=AXIS2_PLACEMENT_3D('',#7824,#13,#28);+#14542=ADVANCED_FACE('',(#14543),#14550,.T.);+#14543=FACE_BOUND('',#14544,.F.);+#14544=EDGE_LOOP('',(#14545,#7888,#14548,#14549));+#14545=ORIENTED_EDGE('',*,*,#14546,.T.);+#14546=EDGE_CURVE('',#7818,#7885,#14547,.T.);+#14547=LINE('',#7819,#58);+#14548=ORIENTED_EDGE('',*,*,#14536,.F.);+#14549=ORIENTED_EDGE('',*,*,#7822,.F.);+#14550=CYLINDRICAL_SURFACE('',#14551,0.25);+#14551=AXIS2_PLACEMENT_3D('',#7827,#87,#7551);+#14552=ADVANCED_FACE('',(#14553),#14558,.F.);+#14553=FACE_BOUND('',#14554,.F.);+#14554=EDGE_LOOP('',(#14555,#7883,#14556,#14557));+#14555=ORIENTED_EDGE('',*,*,#7876,.T.);+#14556=ORIENTED_EDGE('',*,*,#14546,.F.);+#14557=ORIENTED_EDGE('',*,*,#7817,.F.);+#14558=PLANE('',#14559);+#14559=AXIS2_PLACEMENT_3D('',#7812,#14405,#7543);+#14560=ADVANCED_FACE('',(#14561),#14568,.T.);+#14561=FACE_BOUND('',#14562,.F.);+#14562=EDGE_LOOP('',(#14563,#8061,#14566,#14567));+#14563=ORIENTED_EDGE('',*,*,#14564,.T.);+#14564=EDGE_CURVE('',#7991,#8058,#14565,.T.);+#14565=LINE('',#7992,#58);+#14566=ORIENTED_EDGE('',*,*,#11838,.F.);+#14567=ORIENTED_EDGE('',*,*,#7995,.F.);+#14568=CYLINDRICAL_SURFACE('',#14569,0.25);+#14569=AXIS2_PLACEMENT_3D('',#7955,#87,#7585);+#14570=ADVANCED_FACE('',(#14571),#14578,.F.);+#14571=FACE_BOUND('',#14572,.F.);+#14572=EDGE_LOOP('',(#14573,#8056,#14576,#14577));+#14573=ORIENTED_EDGE('',*,*,#14574,.T.);+#14574=EDGE_CURVE('',#7985,#8052,#14575,.T.);+#14575=LINE('',#7986,#58);+#14576=ORIENTED_EDGE('',*,*,#14564,.F.);+#14577=ORIENTED_EDGE('',*,*,#7990,.F.);+#14578=PLANE('',#14579);+#14579=AXIS2_PLACEMENT_3D('',#7986,#14347,#7580);+#14580=ADVANCED_FACE('',(#14581),#14588,.F.);+#14581=FACE_BOUND('',#14582,.F.);+#14582=EDGE_LOOP('',(#14583,#8050,#14586,#14587));+#14583=ORIENTED_EDGE('',*,*,#14584,.T.);+#14584=EDGE_CURVE('',#7980,#8047,#14585,.T.);+#14585=LINE('',#7981,#58);+#14586=ORIENTED_EDGE('',*,*,#14574,.F.);+#14587=ORIENTED_EDGE('',*,*,#7984,.F.);+#14588=CYLINDRICAL_SURFACE('',#7988,0.1);+#14589=ADVANCED_FACE('',(#14590),#14597,.F.);+#14590=FACE_BOUND('',#14591,.F.);+#14591=EDGE_LOOP('',(#14592,#8045,#14595,#14596));+#14592=ORIENTED_EDGE('',*,*,#14593,.T.);+#14593=EDGE_CURVE('',#7975,#8042,#14594,.T.);+#14594=LINE('',#7976,#58);+#14595=ORIENTED_EDGE('',*,*,#14584,.F.);+#14596=ORIENTED_EDGE('',*,*,#7979,.F.);+#14597=PLANE('',#14598);+#14598=AXIS2_PLACEMENT_3D('',#7976,#3014,#73);+#14599=ADVANCED_FACE('',(#14600),#14607,.F.);+#14600=FACE_BOUND('',#14601,.F.);+#14601=EDGE_LOOP('',(#14602,#8040,#14605,#14606));+#14602=ORIENTED_EDGE('',*,*,#14603,.T.);+#14603=EDGE_CURVE('',#7970,#8037,#14604,.T.);+#14604=LINE('',#7971,#58);+#14605=ORIENTED_EDGE('',*,*,#14593,.F.);+#14606=ORIENTED_EDGE('',*,*,#7974,.F.);+#14607=PLANE('',#14608);+#14608=AXIS2_PLACEMENT_3D('',#7971,#73,#13);+#14609=ADVANCED_FACE('',(#14610),#14617,.F.);+#14610=FACE_BOUND('',#14611,.F.);+#14611=EDGE_LOOP('',(#14612,#8035,#14615,#14616));+#14612=ORIENTED_EDGE('',*,*,#14613,.T.);+#14613=EDGE_CURVE('',#7963,#8030,#14614,.T.);+#14614=LINE('',#7964,#58);+#14615=ORIENTED_EDGE('',*,*,#14603,.F.);+#14616=ORIENTED_EDGE('',*,*,#7969,.F.);+#14617=PLANE('',#14618);+#14618=AXIS2_PLACEMENT_3D('',#7964,#13,#28);+#14619=ADVANCED_FACE('',(#14620),#14627,.T.);+#14620=FACE_BOUND('',#14621,.F.);+#14621=EDGE_LOOP('',(#14622,#8028,#14625,#14626));+#14622=ORIENTED_EDGE('',*,*,#14623,.T.);+#14623=EDGE_CURVE('',#7958,#8025,#14624,.T.);+#14624=LINE('',#7959,#58);+#14625=ORIENTED_EDGE('',*,*,#14613,.F.);+#14626=ORIENTED_EDGE('',*,*,#7962,.F.);+#14627=CYLINDRICAL_SURFACE('',#14628,0.25);+#14628=AXIS2_PLACEMENT_3D('',#7967,#87,#7551);+#14629=ADVANCED_FACE('',(#14630),#14635,.F.);+#14630=FACE_BOUND('',#14631,.F.);+#14631=EDGE_LOOP('',(#14632,#8023,#14633,#14634));+#14632=ORIENTED_EDGE('',*,*,#8016,.T.);+#14633=ORIENTED_EDGE('',*,*,#14623,.F.);+#14634=ORIENTED_EDGE('',*,*,#7957,.F.);+#14635=PLANE('',#14636);+#14636=AXIS2_PLACEMENT_3D('',#7952,#14405,#7543);+#14637=ADVANCED_FACE('',(#14638),#14645,.T.);+#14638=FACE_BOUND('',#14639,.F.);+#14639=EDGE_LOOP('',(#14640,#8201,#14643,#14644));+#14640=ORIENTED_EDGE('',*,*,#14641,.T.);+#14641=EDGE_CURVE('',#8131,#8198,#14642,.T.);+#14642=LINE('',#8132,#58);+#14643=ORIENTED_EDGE('',*,*,#11850,.F.);+#14644=ORIENTED_EDGE('',*,*,#8135,.F.);+#14645=CYLINDRICAL_SURFACE('',#14646,0.25);+#14646=AXIS2_PLACEMENT_3D('',#8095,#87,#7585);+#14647=ADVANCED_FACE('',(#14648),#14655,.F.);+#14648=FACE_BOUND('',#14649,.F.);+#14649=EDGE_LOOP('',(#14650,#8196,#14653,#14654));+#14650=ORIENTED_EDGE('',*,*,#14651,.T.);+#14651=EDGE_CURVE('',#8125,#8192,#14652,.T.);+#14652=LINE('',#8126,#58);+#14653=ORIENTED_EDGE('',*,*,#14641,.F.);+#14654=ORIENTED_EDGE('',*,*,#8130,.F.);+#14655=PLANE('',#14656);+#14656=AXIS2_PLACEMENT_3D('',#8126,#14347,#7580);+#14657=ADVANCED_FACE('',(#14658),#14665,.F.);+#14658=FACE_BOUND('',#14659,.F.);+#14659=EDGE_LOOP('',(#14660,#8190,#14663,#14664));+#14660=ORIENTED_EDGE('',*,*,#14661,.T.);+#14661=EDGE_CURVE('',#8120,#8187,#14662,.T.);+#14662=LINE('',#8121,#58);+#14663=ORIENTED_EDGE('',*,*,#14651,.F.);+#14664=ORIENTED_EDGE('',*,*,#8124,.F.);+#14665=CYLINDRICAL_SURFACE('',#8128,0.1);+#14666=ADVANCED_FACE('',(#14667),#14674,.F.);+#14667=FACE_BOUND('',#14668,.F.);+#14668=EDGE_LOOP('',(#14669,#8185,#14672,#14673));+#14669=ORIENTED_EDGE('',*,*,#14670,.T.);+#14670=EDGE_CURVE('',#8115,#8182,#14671,.T.);+#14671=LINE('',#8116,#58);+#14672=ORIENTED_EDGE('',*,*,#14661,.F.);+#14673=ORIENTED_EDGE('',*,*,#8119,.F.);+#14674=PLANE('',#14675);+#14675=AXIS2_PLACEMENT_3D('',#8116,#3014,#73);+#14676=ADVANCED_FACE('',(#14677),#14684,.F.);+#14677=FACE_BOUND('',#14678,.F.);+#14678=EDGE_LOOP('',(#14679,#8180,#14682,#14683));+#14679=ORIENTED_EDGE('',*,*,#14680,.T.);+#14680=EDGE_CURVE('',#8110,#8177,#14681,.T.);+#14681=LINE('',#8111,#58);+#14682=ORIENTED_EDGE('',*,*,#14670,.F.);+#14683=ORIENTED_EDGE('',*,*,#8114,.F.);+#14684=PLANE('',#14685);+#14685=AXIS2_PLACEMENT_3D('',#8111,#73,#13);+#14686=ADVANCED_FACE('',(#14687),#14694,.F.);+#14687=FACE_BOUND('',#14688,.F.);+#14688=EDGE_LOOP('',(#14689,#8175,#14692,#14693));+#14689=ORIENTED_EDGE('',*,*,#14690,.T.);+#14690=EDGE_CURVE('',#8103,#8170,#14691,.T.);+#14691=LINE('',#8104,#58);+#14692=ORIENTED_EDGE('',*,*,#14680,.F.);+#14693=ORIENTED_EDGE('',*,*,#8109,.F.);+#14694=PLANE('',#14695);+#14695=AXIS2_PLACEMENT_3D('',#8104,#13,#28);+#14696=ADVANCED_FACE('',(#14697),#14704,.T.);+#14697=FACE_BOUND('',#14698,.F.);+#14698=EDGE_LOOP('',(#14699,#8168,#14702,#14703));+#14699=ORIENTED_EDGE('',*,*,#14700,.T.);+#14700=EDGE_CURVE('',#8098,#8165,#14701,.T.);+#14701=LINE('',#8099,#58);+#14702=ORIENTED_EDGE('',*,*,#14690,.F.);+#14703=ORIENTED_EDGE('',*,*,#8102,.F.);+#14704=CYLINDRICAL_SURFACE('',#14705,0.25);+#14705=AXIS2_PLACEMENT_3D('',#8107,#87,#7551);+#14706=ADVANCED_FACE('',(#14707),#14712,.F.);+#14707=FACE_BOUND('',#14708,.F.);+#14708=EDGE_LOOP('',(#14709,#8163,#14710,#14711));+#14709=ORIENTED_EDGE('',*,*,#8156,.T.);+#14710=ORIENTED_EDGE('',*,*,#14700,.F.);+#14711=ORIENTED_EDGE('',*,*,#8097,.F.);+#14712=PLANE('',#14713);+#14713=AXIS2_PLACEMENT_3D('',#8092,#14405,#7543);+#14714=ADVANCED_FACE('',(#14715),#14722,.T.);+#14715=FACE_BOUND('',#14716,.F.);+#14716=EDGE_LOOP('',(#14717,#8341,#14720,#14721));+#14717=ORIENTED_EDGE('',*,*,#14718,.T.);+#14718=EDGE_CURVE('',#8271,#8338,#14719,.T.);+#14719=LINE('',#8272,#58);+#14720=ORIENTED_EDGE('',*,*,#11862,.F.);+#14721=ORIENTED_EDGE('',*,*,#8275,.F.);+#14722=CYLINDRICAL_SURFACE('',#14723,0.25);+#14723=AXIS2_PLACEMENT_3D('',#8235,#87,#7585);+#14724=ADVANCED_FACE('',(#14725),#14732,.F.);+#14725=FACE_BOUND('',#14726,.F.);+#14726=EDGE_LOOP('',(#14727,#8336,#14730,#14731));+#14727=ORIENTED_EDGE('',*,*,#14728,.T.);+#14728=EDGE_CURVE('',#8265,#8332,#14729,.T.);+#14729=LINE('',#8266,#58);+#14730=ORIENTED_EDGE('',*,*,#14718,.F.);+#14731=ORIENTED_EDGE('',*,*,#8270,.F.);+#14732=PLANE('',#14733);+#14733=AXIS2_PLACEMENT_3D('',#8266,#14347,#7580);+#14734=ADVANCED_FACE('',(#14735),#14742,.F.);+#14735=FACE_BOUND('',#14736,.F.);+#14736=EDGE_LOOP('',(#14737,#8330,#14740,#14741));+#14737=ORIENTED_EDGE('',*,*,#14738,.T.);+#14738=EDGE_CURVE('',#8260,#8327,#14739,.T.);+#14739=LINE('',#8261,#58);+#14740=ORIENTED_EDGE('',*,*,#14728,.F.);+#14741=ORIENTED_EDGE('',*,*,#8264,.F.);+#14742=CYLINDRICAL_SURFACE('',#8268,0.1);+#14743=ADVANCED_FACE('',(#14744),#14751,.F.);+#14744=FACE_BOUND('',#14745,.F.);+#14745=EDGE_LOOP('',(#14746,#8325,#14749,#14750));+#14746=ORIENTED_EDGE('',*,*,#14747,.T.);+#14747=EDGE_CURVE('',#8255,#8322,#14748,.T.);+#14748=LINE('',#8256,#58);+#14749=ORIENTED_EDGE('',*,*,#14738,.F.);+#14750=ORIENTED_EDGE('',*,*,#8259,.F.);+#14751=PLANE('',#14752);+#14752=AXIS2_PLACEMENT_3D('',#8256,#3014,#73);+#14753=ADVANCED_FACE('',(#14754),#14761,.F.);+#14754=FACE_BOUND('',#14755,.F.);+#14755=EDGE_LOOP('',(#14756,#8320,#14759,#14760));+#14756=ORIENTED_EDGE('',*,*,#14757,.T.);+#14757=EDGE_CURVE('',#8250,#8317,#14758,.T.);+#14758=LINE('',#8251,#58);+#14759=ORIENTED_EDGE('',*,*,#14747,.F.);+#14760=ORIENTED_EDGE('',*,*,#8254,.F.);+#14761=PLANE('',#14762);+#14762=AXIS2_PLACEMENT_3D('',#8251,#73,#13);+#14763=ADVANCED_FACE('',(#14764),#14771,.F.);+#14764=FACE_BOUND('',#14765,.F.);+#14765=EDGE_LOOP('',(#14766,#8315,#14769,#14770));+#14766=ORIENTED_EDGE('',*,*,#14767,.T.);+#14767=EDGE_CURVE('',#8243,#8310,#14768,.T.);+#14768=LINE('',#8244,#58);+#14769=ORIENTED_EDGE('',*,*,#14757,.F.);+#14770=ORIENTED_EDGE('',*,*,#8249,.F.);+#14771=PLANE('',#14772);+#14772=AXIS2_PLACEMENT_3D('',#8244,#13,#28);+#14773=ADVANCED_FACE('',(#14774),#14781,.T.);+#14774=FACE_BOUND('',#14775,.F.);+#14775=EDGE_LOOP('',(#14776,#8308,#14779,#14780));+#14776=ORIENTED_EDGE('',*,*,#14777,.T.);+#14777=EDGE_CURVE('',#8238,#8305,#14778,.T.);+#14778=LINE('',#8239,#58);+#14779=ORIENTED_EDGE('',*,*,#14767,.F.);+#14780=ORIENTED_EDGE('',*,*,#8242,.F.);+#14781=CYLINDRICAL_SURFACE('',#14782,0.25);+#14782=AXIS2_PLACEMENT_3D('',#8247,#87,#7551);+#14783=ADVANCED_FACE('',(#14784),#14789,.F.);+#14784=FACE_BOUND('',#14785,.F.);+#14785=EDGE_LOOP('',(#14786,#8303,#14787,#14788));+#14786=ORIENTED_EDGE('',*,*,#8296,.T.);+#14787=ORIENTED_EDGE('',*,*,#14777,.F.);+#14788=ORIENTED_EDGE('',*,*,#8237,.F.);+#14789=PLANE('',#14790);+#14790=AXIS2_PLACEMENT_3D('',#8232,#14405,#7543);+#14791=ADVANCED_FACE('',(#14792),#14799,.T.);+#14792=FACE_BOUND('',#14793,.F.);+#14793=EDGE_LOOP('',(#14794,#8481,#14797,#14798));+#14794=ORIENTED_EDGE('',*,*,#14795,.T.);+#14795=EDGE_CURVE('',#8411,#8478,#14796,.T.);+#14796=LINE('',#8412,#58);+#14797=ORIENTED_EDGE('',*,*,#11874,.F.);+#14798=ORIENTED_EDGE('',*,*,#8415,.F.);+#14799=CYLINDRICAL_SURFACE('',#14800,0.25);+#14800=AXIS2_PLACEMENT_3D('',#8375,#87,#7585);+#14801=ADVANCED_FACE('',(#14802),#14809,.F.);+#14802=FACE_BOUND('',#14803,.F.);+#14803=EDGE_LOOP('',(#14804,#8476,#14807,#14808));+#14804=ORIENTED_EDGE('',*,*,#14805,.T.);+#14805=EDGE_CURVE('',#8405,#8472,#14806,.T.);+#14806=LINE('',#8406,#58);+#14807=ORIENTED_EDGE('',*,*,#14795,.F.);+#14808=ORIENTED_EDGE('',*,*,#8410,.F.);+#14809=PLANE('',#14810);+#14810=AXIS2_PLACEMENT_3D('',#8406,#14347,#7580);+#14811=ADVANCED_FACE('',(#14812),#14819,.F.);+#14812=FACE_BOUND('',#14813,.F.);+#14813=EDGE_LOOP('',(#14814,#8470,#14817,#14818));+#14814=ORIENTED_EDGE('',*,*,#14815,.T.);+#14815=EDGE_CURVE('',#8400,#8467,#14816,.T.);+#14816=LINE('',#8401,#58);+#14817=ORIENTED_EDGE('',*,*,#14805,.F.);+#14818=ORIENTED_EDGE('',*,*,#8404,.F.);+#14819=CYLINDRICAL_SURFACE('',#8408,0.1);+#14820=ADVANCED_FACE('',(#14821),#14828,.F.);+#14821=FACE_BOUND('',#14822,.F.);+#14822=EDGE_LOOP('',(#14823,#8465,#14826,#14827));+#14823=ORIENTED_EDGE('',*,*,#14824,.T.);+#14824=EDGE_CURVE('',#8395,#8462,#14825,.T.);+#14825=LINE('',#8396,#58);+#14826=ORIENTED_EDGE('',*,*,#14815,.F.);+#14827=ORIENTED_EDGE('',*,*,#8399,.F.);+#14828=PLANE('',#14829);+#14829=AXIS2_PLACEMENT_3D('',#8396,#3014,#73);+#14830=ADVANCED_FACE('',(#14831),#14838,.F.);+#14831=FACE_BOUND('',#14832,.F.);+#14832=EDGE_LOOP('',(#14833,#8460,#14836,#14837));+#14833=ORIENTED_EDGE('',*,*,#14834,.T.);+#14834=EDGE_CURVE('',#8390,#8457,#14835,.T.);+#14835=LINE('',#8391,#58);+#14836=ORIENTED_EDGE('',*,*,#14824,.F.);+#14837=ORIENTED_EDGE('',*,*,#8394,.F.);+#14838=PLANE('',#14839);+#14839=AXIS2_PLACEMENT_3D('',#8391,#73,#13);+#14840=ADVANCED_FACE('',(#14841),#14848,.F.);+#14841=FACE_BOUND('',#14842,.F.);+#14842=EDGE_LOOP('',(#14843,#8455,#14846,#14847));+#14843=ORIENTED_EDGE('',*,*,#14844,.T.);+#14844=EDGE_CURVE('',#8383,#8450,#14845,.T.);+#14845=LINE('',#8384,#58);+#14846=ORIENTED_EDGE('',*,*,#14834,.F.);+#14847=ORIENTED_EDGE('',*,*,#8389,.F.);+#14848=PLANE('',#14849);+#14849=AXIS2_PLACEMENT_3D('',#8384,#13,#28);+#14850=ADVANCED_FACE('',(#14851),#14858,.T.);+#14851=FACE_BOUND('',#14852,.F.);+#14852=EDGE_LOOP('',(#14853,#8448,#14856,#14857));+#14853=ORIENTED_EDGE('',*,*,#14854,.T.);+#14854=EDGE_CURVE('',#8378,#8445,#14855,.T.);+#14855=LINE('',#8379,#58);+#14856=ORIENTED_EDGE('',*,*,#14844,.F.);+#14857=ORIENTED_EDGE('',*,*,#8382,.F.);+#14858=CYLINDRICAL_SURFACE('',#14859,0.25);+#14859=AXIS2_PLACEMENT_3D('',#8387,#87,#7551);+#14860=ADVANCED_FACE('',(#14861),#14866,.F.);+#14861=FACE_BOUND('',#14862,.F.);+#14862=EDGE_LOOP('',(#14863,#8443,#14864,#14865));+#14863=ORIENTED_EDGE('',*,*,#8436,.T.);+#14864=ORIENTED_EDGE('',*,*,#14854,.F.);+#14865=ORIENTED_EDGE('',*,*,#8377,.F.);+#14866=PLANE('',#14867);+#14867=AXIS2_PLACEMENT_3D('',#8372,#14405,#7543);+#14868=ADVANCED_FACE('',(#14869),#14876,.T.);+#14869=FACE_BOUND('',#14870,.F.);+#14870=EDGE_LOOP('',(#14871,#8621,#14874,#14875));+#14871=ORIENTED_EDGE('',*,*,#14872,.T.);+#14872=EDGE_CURVE('',#8551,#8618,#14873,.T.);+#14873=LINE('',#8552,#58);+#14874=ORIENTED_EDGE('',*,*,#11886,.F.);+#14875=ORIENTED_EDGE('',*,*,#8555,.F.);+#14876=CYLINDRICAL_SURFACE('',#14877,0.25);+#14877=AXIS2_PLACEMENT_3D('',#8515,#87,#7585);+#14878=ADVANCED_FACE('',(#14879),#14886,.F.);+#14879=FACE_BOUND('',#14880,.F.);+#14880=EDGE_LOOP('',(#14881,#8616,#14884,#14885));+#14881=ORIENTED_EDGE('',*,*,#14882,.T.);+#14882=EDGE_CURVE('',#8545,#8612,#14883,.T.);+#14883=LINE('',#8546,#58);+#14884=ORIENTED_EDGE('',*,*,#14872,.F.);+#14885=ORIENTED_EDGE('',*,*,#8550,.F.);+#14886=PLANE('',#14887);+#14887=AXIS2_PLACEMENT_3D('',#8546,#14347,#7580);+#14888=ADVANCED_FACE('',(#14889),#14896,.F.);+#14889=FACE_BOUND('',#14890,.F.);+#14890=EDGE_LOOP('',(#14891,#8610,#14894,#14895));+#14891=ORIENTED_EDGE('',*,*,#14892,.T.);+#14892=EDGE_CURVE('',#8540,#8607,#14893,.T.);+#14893=LINE('',#8541,#58);+#14894=ORIENTED_EDGE('',*,*,#14882,.F.);+#14895=ORIENTED_EDGE('',*,*,#8544,.F.);+#14896=CYLINDRICAL_SURFACE('',#8548,0.1);+#14897=ADVANCED_FACE('',(#14898),#14905,.F.);+#14898=FACE_BOUND('',#14899,.F.);+#14899=EDGE_LOOP('',(#14900,#8605,#14903,#14904));+#14900=ORIENTED_EDGE('',*,*,#14901,.T.);+#14901=EDGE_CURVE('',#8535,#8602,#14902,.T.);+#14902=LINE('',#8536,#58);+#14903=ORIENTED_EDGE('',*,*,#14892,.F.);+#14904=ORIENTED_EDGE('',*,*,#8539,.F.);+#14905=PLANE('',#14906);+#14906=AXIS2_PLACEMENT_3D('',#8536,#3014,#73);+#14907=ADVANCED_FACE('',(#14908),#14915,.F.);+#14908=FACE_BOUND('',#14909,.F.);+#14909=EDGE_LOOP('',(#14910,#8600,#14913,#14914));+#14910=ORIENTED_EDGE('',*,*,#14911,.T.);+#14911=EDGE_CURVE('',#8530,#8597,#14912,.T.);+#14912=LINE('',#8531,#58);+#14913=ORIENTED_EDGE('',*,*,#14901,.F.);+#14914=ORIENTED_EDGE('',*,*,#8534,.F.);+#14915=PLANE('',#14916);+#14916=AXIS2_PLACEMENT_3D('',#8531,#73,#13);+#14917=ADVANCED_FACE('',(#14918),#14925,.F.);+#14918=FACE_BOUND('',#14919,.F.);+#14919=EDGE_LOOP('',(#14920,#8595,#14923,#14924));+#14920=ORIENTED_EDGE('',*,*,#14921,.T.);+#14921=EDGE_CURVE('',#8523,#8590,#14922,.T.);+#14922=LINE('',#8524,#58);+#14923=ORIENTED_EDGE('',*,*,#14911,.F.);+#14924=ORIENTED_EDGE('',*,*,#8529,.F.);+#14925=PLANE('',#14926);+#14926=AXIS2_PLACEMENT_3D('',#8524,#13,#28);+#14927=ADVANCED_FACE('',(#14928),#14935,.T.);+#14928=FACE_BOUND('',#14929,.F.);+#14929=EDGE_LOOP('',(#14930,#8588,#14933,#14934));+#14930=ORIENTED_EDGE('',*,*,#14931,.T.);+#14931=EDGE_CURVE('',#8518,#8585,#14932,.T.);+#14932=LINE('',#8519,#58);+#14933=ORIENTED_EDGE('',*,*,#14921,.F.);+#14934=ORIENTED_EDGE('',*,*,#8522,.F.);+#14935=CYLINDRICAL_SURFACE('',#14936,0.25);+#14936=AXIS2_PLACEMENT_3D('',#8527,#87,#7551);+#14937=ADVANCED_FACE('',(#14938),#14943,.F.);+#14938=FACE_BOUND('',#14939,.F.);+#14939=EDGE_LOOP('',(#14940,#8583,#14941,#14942));+#14940=ORIENTED_EDGE('',*,*,#8576,.T.);+#14941=ORIENTED_EDGE('',*,*,#14931,.F.);+#14942=ORIENTED_EDGE('',*,*,#8517,.F.);+#14943=PLANE('',#14944);+#14944=AXIS2_PLACEMENT_3D('',#8512,#14405,#7543);+#14945=ADVANCED_FACE('',(#14946),#14953,.T.);+#14946=FACE_BOUND('',#14947,.F.);+#14947=EDGE_LOOP('',(#14948,#8761,#14951,#14952));+#14948=ORIENTED_EDGE('',*,*,#14949,.T.);+#14949=EDGE_CURVE('',#8691,#8758,#14950,.T.);+#14950=LINE('',#8692,#58);+#14951=ORIENTED_EDGE('',*,*,#11898,.F.);+#14952=ORIENTED_EDGE('',*,*,#8695,.F.);+#14953=CYLINDRICAL_SURFACE('',#14954,0.25);+#14954=AXIS2_PLACEMENT_3D('',#8655,#87,#7585);+#14955=ADVANCED_FACE('',(#14956),#14963,.F.);+#14956=FACE_BOUND('',#14957,.F.);+#14957=EDGE_LOOP('',(#14958,#8756,#14961,#14962));+#14958=ORIENTED_EDGE('',*,*,#14959,.T.);+#14959=EDGE_CURVE('',#8685,#8752,#14960,.T.);+#14960=LINE('',#8686,#58);+#14961=ORIENTED_EDGE('',*,*,#14949,.F.);+#14962=ORIENTED_EDGE('',*,*,#8690,.F.);+#14963=PLANE('',#14964);+#14964=AXIS2_PLACEMENT_3D('',#8686,#14347,#7580);+#14965=ADVANCED_FACE('',(#14966),#14973,.F.);+#14966=FACE_BOUND('',#14967,.F.);+#14967=EDGE_LOOP('',(#14968,#8750,#14971,#14972));+#14968=ORIENTED_EDGE('',*,*,#14969,.T.);+#14969=EDGE_CURVE('',#8680,#8747,#14970,.T.);+#14970=LINE('',#8681,#58);+#14971=ORIENTED_EDGE('',*,*,#14959,.F.);+#14972=ORIENTED_EDGE('',*,*,#8684,.F.);+#14973=CYLINDRICAL_SURFACE('',#8688,0.1);+#14974=ADVANCED_FACE('',(#14975),#14982,.F.);+#14975=FACE_BOUND('',#14976,.F.);+#14976=EDGE_LOOP('',(#14977,#8745,#14980,#14981));+#14977=ORIENTED_EDGE('',*,*,#14978,.T.);+#14978=EDGE_CURVE('',#8675,#8742,#14979,.T.);+#14979=LINE('',#8676,#58);+#14980=ORIENTED_EDGE('',*,*,#14969,.F.);+#14981=ORIENTED_EDGE('',*,*,#8679,.F.);+#14982=PLANE('',#14983);+#14983=AXIS2_PLACEMENT_3D('',#8676,#3014,#73);+#14984=ADVANCED_FACE('',(#14985),#14992,.F.);+#14985=FACE_BOUND('',#14986,.F.);+#14986=EDGE_LOOP('',(#14987,#8740,#14990,#14991));+#14987=ORIENTED_EDGE('',*,*,#14988,.T.);+#14988=EDGE_CURVE('',#8670,#8737,#14989,.T.);+#14989=LINE('',#8671,#58);+#14990=ORIENTED_EDGE('',*,*,#14978,.F.);+#14991=ORIENTED_EDGE('',*,*,#8674,.F.);+#14992=PLANE('',#14993);+#14993=AXIS2_PLACEMENT_3D('',#8671,#73,#13);+#14994=ADVANCED_FACE('',(#14995),#15002,.F.);+#14995=FACE_BOUND('',#14996,.F.);+#14996=EDGE_LOOP('',(#14997,#8735,#15000,#15001));+#14997=ORIENTED_EDGE('',*,*,#14998,.T.);+#14998=EDGE_CURVE('',#8663,#8730,#14999,.T.);+#14999=LINE('',#8664,#58);+#15000=ORIENTED_EDGE('',*,*,#14988,.F.);+#15001=ORIENTED_EDGE('',*,*,#8669,.F.);+#15002=PLANE('',#15003);+#15003=AXIS2_PLACEMENT_3D('',#8664,#13,#28);+#15004=ADVANCED_FACE('',(#15005),#15012,.T.);+#15005=FACE_BOUND('',#15006,.F.);+#15006=EDGE_LOOP('',(#15007,#8728,#15010,#15011));+#15007=ORIENTED_EDGE('',*,*,#15008,.T.);+#15008=EDGE_CURVE('',#8658,#8725,#15009,.T.);+#15009=LINE('',#8659,#58);+#15010=ORIENTED_EDGE('',*,*,#14998,.F.);+#15011=ORIENTED_EDGE('',*,*,#8662,.F.);+#15012=CYLINDRICAL_SURFACE('',#15013,0.25);+#15013=AXIS2_PLACEMENT_3D('',#8667,#87,#7551);+#15014=ADVANCED_FACE('',(#15015),#15020,.F.);+#15015=FACE_BOUND('',#15016,.F.);+#15016=EDGE_LOOP('',(#15017,#8723,#15018,#15019));+#15017=ORIENTED_EDGE('',*,*,#8716,.T.);+#15018=ORIENTED_EDGE('',*,*,#15008,.F.);+#15019=ORIENTED_EDGE('',*,*,#8657,.F.);+#15020=PLANE('',#15021);+#15021=AXIS2_PLACEMENT_3D('',#8652,#14405,#7543);+#15022=ADVANCED_FACE('',(#15023),#15030,.T.);+#15023=FACE_BOUND('',#15024,.F.);+#15024=EDGE_LOOP('',(#15025,#8901,#15028,#15029));+#15025=ORIENTED_EDGE('',*,*,#15026,.T.);+#15026=EDGE_CURVE('',#8831,#8898,#15027,.T.);+#15027=LINE('',#8832,#58);+#15028=ORIENTED_EDGE('',*,*,#11910,.F.);+#15029=ORIENTED_EDGE('',*,*,#8835,.F.);+#15030=CYLINDRICAL_SURFACE('',#15031,0.25);+#15031=AXIS2_PLACEMENT_3D('',#8795,#87,#7585);+#15032=ADVANCED_FACE('',(#15033),#15040,.F.);+#15033=FACE_BOUND('',#15034,.F.);+#15034=EDGE_LOOP('',(#15035,#8896,#15038,#15039));+#15035=ORIENTED_EDGE('',*,*,#15036,.T.);+#15036=EDGE_CURVE('',#8825,#8892,#15037,.T.);+#15037=LINE('',#8826,#58);+#15038=ORIENTED_EDGE('',*,*,#15026,.F.);+#15039=ORIENTED_EDGE('',*,*,#8830,.F.);+#15040=PLANE('',#15041);+#15041=AXIS2_PLACEMENT_3D('',#8826,#14347,#7580);+#15042=ADVANCED_FACE('',(#15043),#15050,.F.);+#15043=FACE_BOUND('',#15044,.F.);+#15044=EDGE_LOOP('',(#15045,#8890,#15048,#15049));+#15045=ORIENTED_EDGE('',*,*,#15046,.T.);+#15046=EDGE_CURVE('',#8820,#8887,#15047,.T.);+#15047=LINE('',#8821,#58);+#15048=ORIENTED_EDGE('',*,*,#15036,.F.);+#15049=ORIENTED_EDGE('',*,*,#8824,.F.);+#15050=CYLINDRICAL_SURFACE('',#8828,0.1);+#15051=ADVANCED_FACE('',(#15052),#15059,.F.);+#15052=FACE_BOUND('',#15053,.F.);+#15053=EDGE_LOOP('',(#15054,#8885,#15057,#15058));+#15054=ORIENTED_EDGE('',*,*,#15055,.T.);+#15055=EDGE_CURVE('',#8815,#8882,#15056,.T.);+#15056=LINE('',#8816,#58);+#15057=ORIENTED_EDGE('',*,*,#15046,.F.);+#15058=ORIENTED_EDGE('',*,*,#8819,.F.);+#15059=PLANE('',#15060);+#15060=AXIS2_PLACEMENT_3D('',#8816,#3014,#73);+#15061=ADVANCED_FACE('',(#15062),#15069,.F.);+#15062=FACE_BOUND('',#15063,.F.);+#15063=EDGE_LOOP('',(#15064,#8880,#15067,#15068));+#15064=ORIENTED_EDGE('',*,*,#15065,.T.);+#15065=EDGE_CURVE('',#8810,#8877,#15066,.T.);+#15066=LINE('',#8811,#58);+#15067=ORIENTED_EDGE('',*,*,#15055,.F.);+#15068=ORIENTED_EDGE('',*,*,#8814,.F.);+#15069=PLANE('',#15070);+#15070=AXIS2_PLACEMENT_3D('',#8811,#73,#13);+#15071=ADVANCED_FACE('',(#15072),#15079,.F.);+#15072=FACE_BOUND('',#15073,.F.);+#15073=EDGE_LOOP('',(#15074,#8875,#15077,#15078));+#15074=ORIENTED_EDGE('',*,*,#15075,.T.);+#15075=EDGE_CURVE('',#8803,#8870,#15076,.T.);+#15076=LINE('',#8804,#58);+#15077=ORIENTED_EDGE('',*,*,#15065,.F.);+#15078=ORIENTED_EDGE('',*,*,#8809,.F.);+#15079=PLANE('',#15080);+#15080=AXIS2_PLACEMENT_3D('',#8804,#13,#28);+#15081=ADVANCED_FACE('',(#15082),#15089,.T.);+#15082=FACE_BOUND('',#15083,.F.);+#15083=EDGE_LOOP('',(#15084,#8868,#15087,#15088));+#15084=ORIENTED_EDGE('',*,*,#15085,.T.);+#15085=EDGE_CURVE('',#8798,#8865,#15086,.T.);+#15086=LINE('',#8799,#58);+#15087=ORIENTED_EDGE('',*,*,#15075,.F.);+#15088=ORIENTED_EDGE('',*,*,#8802,.F.);+#15089=CYLINDRICAL_SURFACE('',#15090,0.25);+#15090=AXIS2_PLACEMENT_3D('',#8807,#87,#7551);+#15091=ADVANCED_FACE('',(#15092),#15097,.F.);+#15092=FACE_BOUND('',#15093,.F.);+#15093=EDGE_LOOP('',(#15094,#8863,#15095,#15096));+#15094=ORIENTED_EDGE('',*,*,#8856,.T.);+#15095=ORIENTED_EDGE('',*,*,#15085,.F.);+#15096=ORIENTED_EDGE('',*,*,#8797,.F.);+#15097=PLANE('',#15098);+#15098=AXIS2_PLACEMENT_3D('',#8792,#14405,#7543);+#15099=ADVANCED_FACE('',(#15100),#15107,.T.);+#15100=FACE_BOUND('',#15101,.F.);+#15101=EDGE_LOOP('',(#15102,#9041,#15105,#15106));+#15102=ORIENTED_EDGE('',*,*,#15103,.T.);+#15103=EDGE_CURVE('',#8971,#9038,#15104,.T.);+#15104=LINE('',#8972,#58);+#15105=ORIENTED_EDGE('',*,*,#11922,.F.);+#15106=ORIENTED_EDGE('',*,*,#8975,.F.);+#15107=CYLINDRICAL_SURFACE('',#15108,0.25);+#15108=AXIS2_PLACEMENT_3D('',#8935,#87,#7585);+#15109=ADVANCED_FACE('',(#15110),#15117,.F.);+#15110=FACE_BOUND('',#15111,.F.);+#15111=EDGE_LOOP('',(#15112,#9036,#15115,#15116));+#15112=ORIENTED_EDGE('',*,*,#15113,.T.);+#15113=EDGE_CURVE('',#8965,#9032,#15114,.T.);+#15114=LINE('',#8966,#58);+#15115=ORIENTED_EDGE('',*,*,#15103,.F.);+#15116=ORIENTED_EDGE('',*,*,#8970,.F.);+#15117=PLANE('',#15118);+#15118=AXIS2_PLACEMENT_3D('',#8966,#14347,#7580);+#15119=ADVANCED_FACE('',(#15120),#15127,.F.);+#15120=FACE_BOUND('',#15121,.F.);+#15121=EDGE_LOOP('',(#15122,#9030,#15125,#15126));+#15122=ORIENTED_EDGE('',*,*,#15123,.T.);+#15123=EDGE_CURVE('',#8960,#9027,#15124,.T.);+#15124=LINE('',#8961,#58);+#15125=ORIENTED_EDGE('',*,*,#15113,.F.);+#15126=ORIENTED_EDGE('',*,*,#8964,.F.);+#15127=CYLINDRICAL_SURFACE('',#8968,0.1);+#15128=ADVANCED_FACE('',(#15129),#15136,.F.);+#15129=FACE_BOUND('',#15130,.F.);+#15130=EDGE_LOOP('',(#15131,#9025,#15134,#15135));+#15131=ORIENTED_EDGE('',*,*,#15132,.T.);+#15132=EDGE_CURVE('',#8955,#9022,#15133,.T.);+#15133=LINE('',#8956,#58);+#15134=ORIENTED_EDGE('',*,*,#15123,.F.);+#15135=ORIENTED_EDGE('',*,*,#8959,.F.);+#15136=PLANE('',#15137);+#15137=AXIS2_PLACEMENT_3D('',#8956,#3014,#73);+#15138=ADVANCED_FACE('',(#15139),#15146,.F.);+#15139=FACE_BOUND('',#15140,.F.);+#15140=EDGE_LOOP('',(#15141,#9020,#15144,#15145));+#15141=ORIENTED_EDGE('',*,*,#15142,.T.);+#15142=EDGE_CURVE('',#8950,#9017,#15143,.T.);+#15143=LINE('',#8951,#58);+#15144=ORIENTED_EDGE('',*,*,#15132,.F.);+#15145=ORIENTED_EDGE('',*,*,#8954,.F.);+#15146=PLANE('',#15147);+#15147=AXIS2_PLACEMENT_3D('',#8951,#73,#13);+#15148=ADVANCED_FACE('',(#15149),#15156,.F.);+#15149=FACE_BOUND('',#15150,.F.);+#15150=EDGE_LOOP('',(#15151,#9015,#15154,#15155));+#15151=ORIENTED_EDGE('',*,*,#15152,.T.);+#15152=EDGE_CURVE('',#8943,#9010,#15153,.T.);+#15153=LINE('',#8944,#58);+#15154=ORIENTED_EDGE('',*,*,#15142,.F.);+#15155=ORIENTED_EDGE('',*,*,#8949,.F.);+#15156=PLANE('',#15157);+#15157=AXIS2_PLACEMENT_3D('',#8944,#13,#28);+#15158=ADVANCED_FACE('',(#15159),#15166,.T.);+#15159=FACE_BOUND('',#15160,.F.);+#15160=EDGE_LOOP('',(#15161,#9008,#15164,#15165));+#15161=ORIENTED_EDGE('',*,*,#15162,.T.);+#15162=EDGE_CURVE('',#8938,#9005,#15163,.T.);+#15163=LINE('',#8939,#58);+#15164=ORIENTED_EDGE('',*,*,#15152,.F.);+#15165=ORIENTED_EDGE('',*,*,#8942,.F.);+#15166=CYLINDRICAL_SURFACE('',#15167,0.25);+#15167=AXIS2_PLACEMENT_3D('',#8947,#87,#7551);+#15168=ADVANCED_FACE('',(#15169),#15174,.F.);+#15169=FACE_BOUND('',#15170,.F.);+#15170=EDGE_LOOP('',(#15171,#9003,#15172,#15173));+#15171=ORIENTED_EDGE('',*,*,#8996,.T.);+#15172=ORIENTED_EDGE('',*,*,#15162,.F.);+#15173=ORIENTED_EDGE('',*,*,#8937,.F.);+#15174=PLANE('',#15175);+#15175=AXIS2_PLACEMENT_3D('',#8932,#14405,#7543);+#15176=ADVANCED_FACE('',(#15177),#15184,.T.);+#15177=FACE_BOUND('',#15178,.F.);+#15178=EDGE_LOOP('',(#15179,#9181,#15182,#15183));+#15179=ORIENTED_EDGE('',*,*,#15180,.T.);+#15180=EDGE_CURVE('',#9111,#9178,#15181,.T.);+#15181=LINE('',#9112,#58);+#15182=ORIENTED_EDGE('',*,*,#11934,.F.);+#15183=ORIENTED_EDGE('',*,*,#9115,.F.);+#15184=CYLINDRICAL_SURFACE('',#15185,0.25);+#15185=AXIS2_PLACEMENT_3D('',#9075,#87,#7585);+#15186=ADVANCED_FACE('',(#15187),#15194,.F.);+#15187=FACE_BOUND('',#15188,.F.);+#15188=EDGE_LOOP('',(#15189,#9176,#15192,#15193));+#15189=ORIENTED_EDGE('',*,*,#15190,.T.);+#15190=EDGE_CURVE('',#9105,#9172,#15191,.T.);+#15191=LINE('',#9106,#58);+#15192=ORIENTED_EDGE('',*,*,#15180,.F.);+#15193=ORIENTED_EDGE('',*,*,#9110,.F.);+#15194=PLANE('',#15195);+#15195=AXIS2_PLACEMENT_3D('',#9106,#14347,#7580);+#15196=ADVANCED_FACE('',(#15197),#15204,.F.);+#15197=FACE_BOUND('',#15198,.F.);+#15198=EDGE_LOOP('',(#15199,#9170,#15202,#15203));+#15199=ORIENTED_EDGE('',*,*,#15200,.T.);+#15200=EDGE_CURVE('',#9100,#9167,#15201,.T.);+#15201=LINE('',#9101,#58);+#15202=ORIENTED_EDGE('',*,*,#15190,.F.);+#15203=ORIENTED_EDGE('',*,*,#9104,.F.);+#15204=CYLINDRICAL_SURFACE('',#9108,0.1);+#15205=ADVANCED_FACE('',(#15206),#15213,.F.);+#15206=FACE_BOUND('',#15207,.F.);+#15207=EDGE_LOOP('',(#15208,#9165,#15211,#15212));+#15208=ORIENTED_EDGE('',*,*,#15209,.T.);+#15209=EDGE_CURVE('',#9095,#9162,#15210,.T.);+#15210=LINE('',#9096,#58);+#15211=ORIENTED_EDGE('',*,*,#15200,.F.);+#15212=ORIENTED_EDGE('',*,*,#9099,.F.);+#15213=PLANE('',#15214);+#15214=AXIS2_PLACEMENT_3D('',#9096,#3014,#73);+#15215=ADVANCED_FACE('',(#15216),#15223,.F.);+#15216=FACE_BOUND('',#15217,.F.);+#15217=EDGE_LOOP('',(#15218,#9160,#15221,#15222));+#15218=ORIENTED_EDGE('',*,*,#15219,.T.);+#15219=EDGE_CURVE('',#9090,#9157,#15220,.T.);+#15220=LINE('',#9091,#58);+#15221=ORIENTED_EDGE('',*,*,#15209,.F.);+#15222=ORIENTED_EDGE('',*,*,#9094,.F.);+#15223=PLANE('',#15224);+#15224=AXIS2_PLACEMENT_3D('',#9091,#73,#13);+#15225=ADVANCED_FACE('',(#15226),#15233,.F.);+#15226=FACE_BOUND('',#15227,.F.);+#15227=EDGE_LOOP('',(#15228,#9155,#15231,#15232));+#15228=ORIENTED_EDGE('',*,*,#15229,.T.);+#15229=EDGE_CURVE('',#9083,#9150,#15230,.T.);+#15230=LINE('',#9084,#58);+#15231=ORIENTED_EDGE('',*,*,#15219,.F.);+#15232=ORIENTED_EDGE('',*,*,#9089,.F.);+#15233=PLANE('',#15234);+#15234=AXIS2_PLACEMENT_3D('',#9084,#13,#28);+#15235=ADVANCED_FACE('',(#15236),#15243,.T.);+#15236=FACE_BOUND('',#15237,.F.);+#15237=EDGE_LOOP('',(#15238,#9148,#15241,#15242));+#15238=ORIENTED_EDGE('',*,*,#15239,.T.);+#15239=EDGE_CURVE('',#9078,#9145,#15240,.T.);+#15240=LINE('',#9079,#58);+#15241=ORIENTED_EDGE('',*,*,#15229,.F.);+#15242=ORIENTED_EDGE('',*,*,#9082,.F.);+#15243=CYLINDRICAL_SURFACE('',#15244,0.25);+#15244=AXIS2_PLACEMENT_3D('',#9087,#87,#7551);+#15245=ADVANCED_FACE('',(#15246),#15251,.F.);+#15246=FACE_BOUND('',#15247,.F.);+#15247=EDGE_LOOP('',(#15248,#9143,#15249,#15250));+#15248=ORIENTED_EDGE('',*,*,#9136,.T.);+#15249=ORIENTED_EDGE('',*,*,#15239,.F.);+#15250=ORIENTED_EDGE('',*,*,#9077,.F.);+#15251=PLANE('',#15252);+#15252=AXIS2_PLACEMENT_3D('',#9072,#14405,#7543);+#15253=ADVANCED_FACE('',(#15254),#15261,.T.);+#15254=FACE_BOUND('',#15255,.F.);+#15255=EDGE_LOOP('',(#15256,#9321,#15259,#15260));+#15256=ORIENTED_EDGE('',*,*,#15257,.T.);+#15257=EDGE_CURVE('',#9251,#9318,#15258,.T.);+#15258=LINE('',#9252,#58);+#15259=ORIENTED_EDGE('',*,*,#11946,.F.);+#15260=ORIENTED_EDGE('',*,*,#9255,.F.);+#15261=CYLINDRICAL_SURFACE('',#15262,0.25);+#15262=AXIS2_PLACEMENT_3D('',#9215,#87,#7585);+#15263=ADVANCED_FACE('',(#15264),#15271,.F.);+#15264=FACE_BOUND('',#15265,.F.);+#15265=EDGE_LOOP('',(#15266,#9316,#15269,#15270));+#15266=ORIENTED_EDGE('',*,*,#15267,.T.);+#15267=EDGE_CURVE('',#9245,#9312,#15268,.T.);+#15268=LINE('',#9246,#58);+#15269=ORIENTED_EDGE('',*,*,#15257,.F.);+#15270=ORIENTED_EDGE('',*,*,#9250,.F.);+#15271=PLANE('',#15272);+#15272=AXIS2_PLACEMENT_3D('',#9246,#14347,#7580);+#15273=ADVANCED_FACE('',(#15274),#15281,.F.);+#15274=FACE_BOUND('',#15275,.F.);+#15275=EDGE_LOOP('',(#15276,#9310,#15279,#15280));+#15276=ORIENTED_EDGE('',*,*,#15277,.T.);+#15277=EDGE_CURVE('',#9240,#9307,#15278,.T.);+#15278=LINE('',#9241,#58);+#15279=ORIENTED_EDGE('',*,*,#15267,.F.);+#15280=ORIENTED_EDGE('',*,*,#9244,.F.);+#15281=CYLINDRICAL_SURFACE('',#9248,0.1);+#15282=ADVANCED_FACE('',(#15283),#15290,.F.);+#15283=FACE_BOUND('',#15284,.F.);+#15284=EDGE_LOOP('',(#15285,#9305,#15288,#15289));+#15285=ORIENTED_EDGE('',*,*,#15286,.T.);+#15286=EDGE_CURVE('',#9235,#9302,#15287,.T.);+#15287=LINE('',#9236,#58);+#15288=ORIENTED_EDGE('',*,*,#15277,.F.);+#15289=ORIENTED_EDGE('',*,*,#9239,.F.);+#15290=PLANE('',#15291);+#15291=AXIS2_PLACEMENT_3D('',#9236,#3014,#73);+#15292=ADVANCED_FACE('',(#15293),#15300,.F.);+#15293=FACE_BOUND('',#15294,.F.);+#15294=EDGE_LOOP('',(#15295,#9300,#15298,#15299));+#15295=ORIENTED_EDGE('',*,*,#15296,.T.);+#15296=EDGE_CURVE('',#9230,#9297,#15297,.T.);+#15297=LINE('',#9231,#58);+#15298=ORIENTED_EDGE('',*,*,#15286,.F.);+#15299=ORIENTED_EDGE('',*,*,#9234,.F.);+#15300=PLANE('',#15301);+#15301=AXIS2_PLACEMENT_3D('',#9231,#73,#13);+#15302=ADVANCED_FACE('',(#15303),#15310,.F.);+#15303=FACE_BOUND('',#15304,.F.);+#15304=EDGE_LOOP('',(#15305,#9295,#15308,#15309));+#15305=ORIENTED_EDGE('',*,*,#15306,.T.);+#15306=EDGE_CURVE('',#9223,#9290,#15307,.T.);+#15307=LINE('',#9224,#58);+#15308=ORIENTED_EDGE('',*,*,#15296,.F.);+#15309=ORIENTED_EDGE('',*,*,#9229,.F.);+#15310=PLANE('',#15311);+#15311=AXIS2_PLACEMENT_3D('',#9224,#13,#28);+#15312=ADVANCED_FACE('',(#15313),#15320,.T.);+#15313=FACE_BOUND('',#15314,.F.);+#15314=EDGE_LOOP('',(#15315,#9288,#15318,#15319));+#15315=ORIENTED_EDGE('',*,*,#15316,.T.);+#15316=EDGE_CURVE('',#9218,#9285,#15317,.T.);+#15317=LINE('',#9219,#58);+#15318=ORIENTED_EDGE('',*,*,#15306,.F.);+#15319=ORIENTED_EDGE('',*,*,#9222,.F.);+#15320=CYLINDRICAL_SURFACE('',#15321,0.25);+#15321=AXIS2_PLACEMENT_3D('',#9227,#87,#7551);+#15322=ADVANCED_FACE('',(#15323),#15328,.F.);+#15323=FACE_BOUND('',#15324,.F.);+#15324=EDGE_LOOP('',(#15325,#9283,#15326,#15327));+#15325=ORIENTED_EDGE('',*,*,#9276,.T.);+#15326=ORIENTED_EDGE('',*,*,#15316,.F.);+#15327=ORIENTED_EDGE('',*,*,#9217,.F.);+#15328=PLANE('',#15329);+#15329=AXIS2_PLACEMENT_3D('',#9212,#14405,#7543);+#15330=ADVANCED_FACE('',(#15331),#15338,.T.);+#15331=FACE_BOUND('',#15332,.F.);+#15332=EDGE_LOOP('',(#15333,#9461,#15336,#15337));+#15333=ORIENTED_EDGE('',*,*,#15334,.T.);+#15334=EDGE_CURVE('',#9391,#9458,#15335,.T.);+#15335=LINE('',#9392,#58);+#15336=ORIENTED_EDGE('',*,*,#11958,.F.);+#15337=ORIENTED_EDGE('',*,*,#9395,.F.);+#15338=CYLINDRICAL_SURFACE('',#15339,0.25);+#15339=AXIS2_PLACEMENT_3D('',#9355,#87,#7585);+#15340=ADVANCED_FACE('',(#15341),#15348,.F.);+#15341=FACE_BOUND('',#15342,.F.);+#15342=EDGE_LOOP('',(#15343,#9456,#15346,#15347));+#15343=ORIENTED_EDGE('',*,*,#15344,.T.);+#15344=EDGE_CURVE('',#9385,#9452,#15345,.T.);+#15345=LINE('',#9386,#58);+#15346=ORIENTED_EDGE('',*,*,#15334,.F.);+#15347=ORIENTED_EDGE('',*,*,#9390,.F.);+#15348=PLANE('',#15349);+#15349=AXIS2_PLACEMENT_3D('',#9386,#14347,#7580);+#15350=ADVANCED_FACE('',(#15351),#15358,.F.);+#15351=FACE_BOUND('',#15352,.F.);+#15352=EDGE_LOOP('',(#15353,#9450,#15356,#15357));+#15353=ORIENTED_EDGE('',*,*,#15354,.T.);+#15354=EDGE_CURVE('',#9380,#9447,#15355,.T.);+#15355=LINE('',#9381,#58);+#15356=ORIENTED_EDGE('',*,*,#15344,.F.);+#15357=ORIENTED_EDGE('',*,*,#9384,.F.);+#15358=CYLINDRICAL_SURFACE('',#9388,0.1);+#15359=ADVANCED_FACE('',(#15360),#15367,.F.);+#15360=FACE_BOUND('',#15361,.F.);+#15361=EDGE_LOOP('',(#15362,#9445,#15365,#15366));+#15362=ORIENTED_EDGE('',*,*,#15363,.T.);+#15363=EDGE_CURVE('',#9375,#9442,#15364,.T.);+#15364=LINE('',#9376,#58);+#15365=ORIENTED_EDGE('',*,*,#15354,.F.);+#15366=ORIENTED_EDGE('',*,*,#9379,.F.);+#15367=PLANE('',#15368);+#15368=AXIS2_PLACEMENT_3D('',#9376,#3014,#73);+#15369=ADVANCED_FACE('',(#15370),#15377,.F.);+#15370=FACE_BOUND('',#15371,.F.);+#15371=EDGE_LOOP('',(#15372,#9440,#15375,#15376));+#15372=ORIENTED_EDGE('',*,*,#15373,.T.);+#15373=EDGE_CURVE('',#9370,#9437,#15374,.T.);+#15374=LINE('',#9371,#58);+#15375=ORIENTED_EDGE('',*,*,#15363,.F.);+#15376=ORIENTED_EDGE('',*,*,#9374,.F.);+#15377=PLANE('',#15378);+#15378=AXIS2_PLACEMENT_3D('',#9371,#73,#13);+#15379=ADVANCED_FACE('',(#15380),#15387,.F.);+#15380=FACE_BOUND('',#15381,.F.);+#15381=EDGE_LOOP('',(#15382,#9435,#15385,#15386));+#15382=ORIENTED_EDGE('',*,*,#15383,.T.);+#15383=EDGE_CURVE('',#9363,#9430,#15384,.T.);+#15384=LINE('',#9364,#58);+#15385=ORIENTED_EDGE('',*,*,#15373,.F.);+#15386=ORIENTED_EDGE('',*,*,#9369,.F.);+#15387=PLANE('',#15388);+#15388=AXIS2_PLACEMENT_3D('',#9364,#13,#28);+#15389=ADVANCED_FACE('',(#15390),#15397,.T.);+#15390=FACE_BOUND('',#15391,.F.);+#15391=EDGE_LOOP('',(#15392,#9428,#15395,#15396));+#15392=ORIENTED_EDGE('',*,*,#15393,.T.);+#15393=EDGE_CURVE('',#9358,#9425,#15394,.T.);+#15394=LINE('',#9359,#58);+#15395=ORIENTED_EDGE('',*,*,#15383,.F.);+#15396=ORIENTED_EDGE('',*,*,#9362,.F.);+#15397=CYLINDRICAL_SURFACE('',#15398,0.25);+#15398=AXIS2_PLACEMENT_3D('',#9367,#87,#7551);+#15399=ADVANCED_FACE('',(#15400),#15405,.F.);+#15400=FACE_BOUND('',#15401,.F.);+#15401=EDGE_LOOP('',(#15402,#9423,#15403,#15404));+#15402=ORIENTED_EDGE('',*,*,#9416,.T.);+#15403=ORIENTED_EDGE('',*,*,#15393,.F.);+#15404=ORIENTED_EDGE('',*,*,#9357,.F.);+#15405=PLANE('',#15406);+#15406=AXIS2_PLACEMENT_3D('',#9352,#14405,#7543);+#15407=ADVANCED_FACE('',(#15408),#15415,.T.);+#15408=FACE_BOUND('',#15409,.F.);+#15409=EDGE_LOOP('',(#15410,#9601,#15413,#15414));+#15410=ORIENTED_EDGE('',*,*,#15411,.T.);+#15411=EDGE_CURVE('',#9531,#9598,#15412,.T.);+#15412=LINE('',#9532,#58);+#15413=ORIENTED_EDGE('',*,*,#11970,.F.);+#15414=ORIENTED_EDGE('',*,*,#9535,.F.);+#15415=CYLINDRICAL_SURFACE('',#15416,0.25);+#15416=AXIS2_PLACEMENT_3D('',#9495,#87,#7585);+#15417=ADVANCED_FACE('',(#15418),#15425,.F.);+#15418=FACE_BOUND('',#15419,.F.);+#15419=EDGE_LOOP('',(#15420,#9596,#15423,#15424));+#15420=ORIENTED_EDGE('',*,*,#15421,.T.);+#15421=EDGE_CURVE('',#9525,#9592,#15422,.T.);+#15422=LINE('',#9526,#58);+#15423=ORIENTED_EDGE('',*,*,#15411,.F.);+#15424=ORIENTED_EDGE('',*,*,#9530,.F.);+#15425=PLANE('',#15426);+#15426=AXIS2_PLACEMENT_3D('',#9526,#14347,#7580);+#15427=ADVANCED_FACE('',(#15428),#15435,.F.);+#15428=FACE_BOUND('',#15429,.F.);+#15429=EDGE_LOOP('',(#15430,#9590,#15433,#15434));+#15430=ORIENTED_EDGE('',*,*,#15431,.T.);+#15431=EDGE_CURVE('',#9520,#9587,#15432,.T.);+#15432=LINE('',#9521,#58);+#15433=ORIENTED_EDGE('',*,*,#15421,.F.);+#15434=ORIENTED_EDGE('',*,*,#9524,.F.);+#15435=CYLINDRICAL_SURFACE('',#9528,0.1);+#15436=ADVANCED_FACE('',(#15437),#15444,.F.);+#15437=FACE_BOUND('',#15438,.F.);+#15438=EDGE_LOOP('',(#15439,#9585,#15442,#15443));+#15439=ORIENTED_EDGE('',*,*,#15440,.T.);+#15440=EDGE_CURVE('',#9515,#9582,#15441,.T.);+#15441=LINE('',#9516,#58);+#15442=ORIENTED_EDGE('',*,*,#15431,.F.);+#15443=ORIENTED_EDGE('',*,*,#9519,.F.);+#15444=PLANE('',#15445);+#15445=AXIS2_PLACEMENT_3D('',#9516,#3014,#73);+#15446=ADVANCED_FACE('',(#15447),#15454,.F.);+#15447=FACE_BOUND('',#15448,.F.);+#15448=EDGE_LOOP('',(#15449,#9580,#15452,#15453));+#15449=ORIENTED_EDGE('',*,*,#15450,.T.);+#15450=EDGE_CURVE('',#9510,#9577,#15451,.T.);+#15451=LINE('',#9511,#58);+#15452=ORIENTED_EDGE('',*,*,#15440,.F.);+#15453=ORIENTED_EDGE('',*,*,#9514,.F.);+#15454=PLANE('',#15455);+#15455=AXIS2_PLACEMENT_3D('',#9511,#73,#13);+#15456=ADVANCED_FACE('',(#15457),#15464,.F.);+#15457=FACE_BOUND('',#15458,.F.);+#15458=EDGE_LOOP('',(#15459,#9575,#15462,#15463));+#15459=ORIENTED_EDGE('',*,*,#15460,.T.);+#15460=EDGE_CURVE('',#9503,#9570,#15461,.T.);+#15461=LINE('',#9504,#58);+#15462=ORIENTED_EDGE('',*,*,#15450,.F.);+#15463=ORIENTED_EDGE('',*,*,#9509,.F.);+#15464=PLANE('',#15465);+#15465=AXIS2_PLACEMENT_3D('',#9504,#13,#28);+#15466=ADVANCED_FACE('',(#15467),#15474,.T.);+#15467=FACE_BOUND('',#15468,.F.);+#15468=EDGE_LOOP('',(#15469,#9568,#15472,#15473));+#15469=ORIENTED_EDGE('',*,*,#15470,.T.);+#15470=EDGE_CURVE('',#9498,#9565,#15471,.T.);+#15471=LINE('',#9499,#58);+#15472=ORIENTED_EDGE('',*,*,#15460,.F.);+#15473=ORIENTED_EDGE('',*,*,#9502,.F.);+#15474=CYLINDRICAL_SURFACE('',#15475,0.25);+#15475=AXIS2_PLACEMENT_3D('',#9507,#87,#7551);+#15476=ADVANCED_FACE('',(#15477),#15482,.F.);+#15477=FACE_BOUND('',#15478,.F.);+#15478=EDGE_LOOP('',(#15479,#9563,#15480,#15481));+#15479=ORIENTED_EDGE('',*,*,#9556,.T.);+#15480=ORIENTED_EDGE('',*,*,#15470,.F.);+#15481=ORIENTED_EDGE('',*,*,#9497,.F.);+#15482=PLANE('',#15483);+#15483=AXIS2_PLACEMENT_3D('',#9492,#14405,#7543);+#15484=ADVANCED_FACE('',(#15485),#15492,.T.);+#15485=FACE_BOUND('',#15486,.F.);+#15486=EDGE_LOOP('',(#15487,#9741,#15490,#15491));+#15487=ORIENTED_EDGE('',*,*,#15488,.T.);+#15488=EDGE_CURVE('',#9671,#9738,#15489,.T.);+#15489=LINE('',#9672,#58);+#15490=ORIENTED_EDGE('',*,*,#11982,.F.);+#15491=ORIENTED_EDGE('',*,*,#9675,.F.);+#15492=CYLINDRICAL_SURFACE('',#15493,0.25);+#15493=AXIS2_PLACEMENT_3D('',#9635,#87,#7585);+#15494=ADVANCED_FACE('',(#15495),#15502,.F.);+#15495=FACE_BOUND('',#15496,.F.);+#15496=EDGE_LOOP('',(#15497,#9736,#15500,#15501));+#15497=ORIENTED_EDGE('',*,*,#15498,.T.);+#15498=EDGE_CURVE('',#9665,#9732,#15499,.T.);+#15499=LINE('',#9666,#58);+#15500=ORIENTED_EDGE('',*,*,#15488,.F.);+#15501=ORIENTED_EDGE('',*,*,#9670,.F.);+#15502=PLANE('',#15503);+#15503=AXIS2_PLACEMENT_3D('',#9666,#14347,#7580);+#15504=ADVANCED_FACE('',(#15505),#15512,.F.);+#15505=FACE_BOUND('',#15506,.F.);+#15506=EDGE_LOOP('',(#15507,#9730,#15510,#15511));+#15507=ORIENTED_EDGE('',*,*,#15508,.T.);+#15508=EDGE_CURVE('',#9660,#9727,#15509,.T.);+#15509=LINE('',#9661,#58);+#15510=ORIENTED_EDGE('',*,*,#15498,.F.);+#15511=ORIENTED_EDGE('',*,*,#9664,.F.);+#15512=CYLINDRICAL_SURFACE('',#9668,0.1);+#15513=ADVANCED_FACE('',(#15514),#15521,.F.);+#15514=FACE_BOUND('',#15515,.F.);+#15515=EDGE_LOOP('',(#15516,#9725,#15519,#15520));+#15516=ORIENTED_EDGE('',*,*,#15517,.T.);+#15517=EDGE_CURVE('',#9655,#9722,#15518,.T.);+#15518=LINE('',#9656,#58);+#15519=ORIENTED_EDGE('',*,*,#15508,.F.);+#15520=ORIENTED_EDGE('',*,*,#9659,.F.);+#15521=PLANE('',#15522);+#15522=AXIS2_PLACEMENT_3D('',#9656,#3014,#73);+#15523=ADVANCED_FACE('',(#15524),#15531,.F.);+#15524=FACE_BOUND('',#15525,.F.);+#15525=EDGE_LOOP('',(#15526,#9720,#15529,#15530));+#15526=ORIENTED_EDGE('',*,*,#15527,.T.);+#15527=EDGE_CURVE('',#9650,#9717,#15528,.T.);+#15528=LINE('',#9651,#58);+#15529=ORIENTED_EDGE('',*,*,#15517,.F.);+#15530=ORIENTED_EDGE('',*,*,#9654,.F.);+#15531=PLANE('',#15532);+#15532=AXIS2_PLACEMENT_3D('',#9651,#73,#13);+#15533=ADVANCED_FACE('',(#15534),#15541,.F.);+#15534=FACE_BOUND('',#15535,.F.);+#15535=EDGE_LOOP('',(#15536,#9715,#15539,#15540));+#15536=ORIENTED_EDGE('',*,*,#15537,.T.);+#15537=EDGE_CURVE('',#9643,#9710,#15538,.T.);+#15538=LINE('',#9644,#58);+#15539=ORIENTED_EDGE('',*,*,#15527,.F.);+#15540=ORIENTED_EDGE('',*,*,#9649,.F.);+#15541=PLANE('',#15542);+#15542=AXIS2_PLACEMENT_3D('',#9644,#13,#28);+#15543=ADVANCED_FACE('',(#15544),#15551,.T.);+#15544=FACE_BOUND('',#15545,.F.);+#15545=EDGE_LOOP('',(#15546,#9708,#15549,#15550));+#15546=ORIENTED_EDGE('',*,*,#15547,.T.);+#15547=EDGE_CURVE('',#9638,#9705,#15548,.T.);+#15548=LINE('',#9639,#58);+#15549=ORIENTED_EDGE('',*,*,#15537,.F.);+#15550=ORIENTED_EDGE('',*,*,#9642,.F.);+#15551=CYLINDRICAL_SURFACE('',#15552,0.25);+#15552=AXIS2_PLACEMENT_3D('',#9647,#87,#7551);+#15553=ADVANCED_FACE('',(#15554),#15559,.F.);+#15554=FACE_BOUND('',#15555,.F.);+#15555=EDGE_LOOP('',(#15556,#9703,#15557,#15558));+#15556=ORIENTED_EDGE('',*,*,#9696,.T.);+#15557=ORIENTED_EDGE('',*,*,#15547,.F.);+#15558=ORIENTED_EDGE('',*,*,#9637,.F.);+#15559=PLANE('',#15560);+#15560=AXIS2_PLACEMENT_3D('',#9632,#14405,#7543);+#15561=ADVANCED_FACE('',(#15562),#15569,.T.);+#15562=FACE_BOUND('',#15563,.F.);+#15563=EDGE_LOOP('',(#15564,#9881,#15567,#15568));+#15564=ORIENTED_EDGE('',*,*,#15565,.T.);+#15565=EDGE_CURVE('',#9811,#9878,#15566,.T.);+#15566=LINE('',#9812,#58);+#15567=ORIENTED_EDGE('',*,*,#11994,.F.);+#15568=ORIENTED_EDGE('',*,*,#9815,.F.);+#15569=CYLINDRICAL_SURFACE('',#15570,0.25);+#15570=AXIS2_PLACEMENT_3D('',#9775,#87,#7585);+#15571=ADVANCED_FACE('',(#15572),#15579,.F.);+#15572=FACE_BOUND('',#15573,.F.);+#15573=EDGE_LOOP('',(#15574,#9876,#15577,#15578));+#15574=ORIENTED_EDGE('',*,*,#15575,.T.);+#15575=EDGE_CURVE('',#9805,#9872,#15576,.T.);+#15576=LINE('',#9806,#58);+#15577=ORIENTED_EDGE('',*,*,#15565,.F.);+#15578=ORIENTED_EDGE('',*,*,#9810,.F.);+#15579=PLANE('',#15580);+#15580=AXIS2_PLACEMENT_3D('',#9806,#14347,#7580);+#15581=ADVANCED_FACE('',(#15582),#15589,.F.);+#15582=FACE_BOUND('',#15583,.F.);+#15583=EDGE_LOOP('',(#15584,#9870,#15587,#15588));+#15584=ORIENTED_EDGE('',*,*,#15585,.T.);+#15585=EDGE_CURVE('',#9800,#9867,#15586,.T.);+#15586=LINE('',#9801,#58);+#15587=ORIENTED_EDGE('',*,*,#15575,.F.);+#15588=ORIENTED_EDGE('',*,*,#9804,.F.);+#15589=CYLINDRICAL_SURFACE('',#9808,0.1);+#15590=ADVANCED_FACE('',(#15591),#15598,.F.);+#15591=FACE_BOUND('',#15592,.F.);+#15592=EDGE_LOOP('',(#15593,#9865,#15596,#15597));+#15593=ORIENTED_EDGE('',*,*,#15594,.T.);+#15594=EDGE_CURVE('',#9795,#9862,#15595,.T.);+#15595=LINE('',#9796,#58);+#15596=ORIENTED_EDGE('',*,*,#15585,.F.);+#15597=ORIENTED_EDGE('',*,*,#9799,.F.);+#15598=PLANE('',#15599);+#15599=AXIS2_PLACEMENT_3D('',#9796,#3014,#73);+#15600=ADVANCED_FACE('',(#15601),#15608,.F.);+#15601=FACE_BOUND('',#15602,.F.);+#15602=EDGE_LOOP('',(#15603,#9860,#15606,#15607));+#15603=ORIENTED_EDGE('',*,*,#15604,.T.);+#15604=EDGE_CURVE('',#9790,#9857,#15605,.T.);+#15605=LINE('',#9791,#58);+#15606=ORIENTED_EDGE('',*,*,#15594,.F.);+#15607=ORIENTED_EDGE('',*,*,#9794,.F.);+#15608=PLANE('',#15609);+#15609=AXIS2_PLACEMENT_3D('',#9791,#73,#13);+#15610=ADVANCED_FACE('',(#15611),#15618,.F.);+#15611=FACE_BOUND('',#15612,.F.);+#15612=EDGE_LOOP('',(#15613,#9855,#15616,#15617));+#15613=ORIENTED_EDGE('',*,*,#15614,.T.);+#15614=EDGE_CURVE('',#9783,#9850,#15615,.T.);+#15615=LINE('',#9784,#58);+#15616=ORIENTED_EDGE('',*,*,#15604,.F.);+#15617=ORIENTED_EDGE('',*,*,#9789,.F.);+#15618=PLANE('',#15619);+#15619=AXIS2_PLACEMENT_3D('',#9784,#13,#28);+#15620=ADVANCED_FACE('',(#15621),#15628,.T.);+#15621=FACE_BOUND('',#15622,.F.);+#15622=EDGE_LOOP('',(#15623,#9848,#15626,#15627));+#15623=ORIENTED_EDGE('',*,*,#15624,.T.);+#15624=EDGE_CURVE('',#9778,#9845,#15625,.T.);+#15625=LINE('',#9779,#58);+#15626=ORIENTED_EDGE('',*,*,#15614,.F.);+#15627=ORIENTED_EDGE('',*,*,#9782,.F.);+#15628=CYLINDRICAL_SURFACE('',#15629,0.25);+#15629=AXIS2_PLACEMENT_3D('',#9787,#87,#7551);+#15630=ADVANCED_FACE('',(#15631),#15636,.F.);+#15631=FACE_BOUND('',#15632,.F.);+#15632=EDGE_LOOP('',(#15633,#9843,#15634,#15635));+#15633=ORIENTED_EDGE('',*,*,#9836,.T.);+#15634=ORIENTED_EDGE('',*,*,#15624,.F.);+#15635=ORIENTED_EDGE('',*,*,#9777,.F.);+#15636=PLANE('',#15637);+#15637=AXIS2_PLACEMENT_3D('',#9772,#14405,#7543);+#15638=ADVANCED_FACE('',(#15639),#15646,.T.);+#15639=FACE_BOUND('',#15640,.F.);+#15640=EDGE_LOOP('',(#15641,#10021,#15644,#15645));+#15641=ORIENTED_EDGE('',*,*,#15642,.T.);+#15642=EDGE_CURVE('',#9951,#10018,#15643,.T.);+#15643=LINE('',#9952,#58);+#15644=ORIENTED_EDGE('',*,*,#12006,.F.);+#15645=ORIENTED_EDGE('',*,*,#9955,.F.);+#15646=CYLINDRICAL_SURFACE('',#15647,0.25);+#15647=AXIS2_PLACEMENT_3D('',#9915,#87,#7585);+#15648=ADVANCED_FACE('',(#15649),#15656,.F.);+#15649=FACE_BOUND('',#15650,.F.);+#15650=EDGE_LOOP('',(#15651,#10016,#15654,#15655));+#15651=ORIENTED_EDGE('',*,*,#15652,.T.);+#15652=EDGE_CURVE('',#9945,#10012,#15653,.T.);+#15653=LINE('',#9946,#58);+#15654=ORIENTED_EDGE('',*,*,#15642,.F.);+#15655=ORIENTED_EDGE('',*,*,#9950,.F.);+#15656=PLANE('',#15657);+#15657=AXIS2_PLACEMENT_3D('',#9946,#14347,#7580);+#15658=ADVANCED_FACE('',(#15659),#15666,.F.);+#15659=FACE_BOUND('',#15660,.F.);+#15660=EDGE_LOOP('',(#15661,#10010,#15664,#15665));+#15661=ORIENTED_EDGE('',*,*,#15662,.T.);+#15662=EDGE_CURVE('',#9940,#10007,#15663,.T.);+#15663=LINE('',#9941,#58);+#15664=ORIENTED_EDGE('',*,*,#15652,.F.);+#15665=ORIENTED_EDGE('',*,*,#9944,.F.);+#15666=CYLINDRICAL_SURFACE('',#9948,0.1);+#15667=ADVANCED_FACE('',(#15668),#15675,.F.);+#15668=FACE_BOUND('',#15669,.F.);+#15669=EDGE_LOOP('',(#15670,#10005,#15673,#15674));+#15670=ORIENTED_EDGE('',*,*,#15671,.T.);+#15671=EDGE_CURVE('',#9935,#10002,#15672,.T.);+#15672=LINE('',#9936,#58);+#15673=ORIENTED_EDGE('',*,*,#15662,.F.);+#15674=ORIENTED_EDGE('',*,*,#9939,.F.);+#15675=PLANE('',#15676);+#15676=AXIS2_PLACEMENT_3D('',#9936,#3014,#73);+#15677=ADVANCED_FACE('',(#15678),#15685,.F.);+#15678=FACE_BOUND('',#15679,.F.);+#15679=EDGE_LOOP('',(#15680,#10000,#15683,#15684));+#15680=ORIENTED_EDGE('',*,*,#15681,.T.);+#15681=EDGE_CURVE('',#9930,#9997,#15682,.T.);+#15682=LINE('',#9931,#58);+#15683=ORIENTED_EDGE('',*,*,#15671,.F.);+#15684=ORIENTED_EDGE('',*,*,#9934,.F.);+#15685=PLANE('',#15686);+#15686=AXIS2_PLACEMENT_3D('',#9931,#73,#13);+#15687=ADVANCED_FACE('',(#15688),#15695,.F.);+#15688=FACE_BOUND('',#15689,.F.);+#15689=EDGE_LOOP('',(#15690,#9995,#15693,#15694));+#15690=ORIENTED_EDGE('',*,*,#15691,.T.);+#15691=EDGE_CURVE('',#9923,#9990,#15692,.T.);+#15692=LINE('',#9924,#58);+#15693=ORIENTED_EDGE('',*,*,#15681,.F.);+#15694=ORIENTED_EDGE('',*,*,#9929,.F.);+#15695=PLANE('',#15696);+#15696=AXIS2_PLACEMENT_3D('',#9924,#13,#28);+#15697=ADVANCED_FACE('',(#15698),#15705,.T.);+#15698=FACE_BOUND('',#15699,.F.);+#15699=EDGE_LOOP('',(#15700,#9988,#15703,#15704));+#15700=ORIENTED_EDGE('',*,*,#15701,.T.);+#15701=EDGE_CURVE('',#9918,#9985,#15702,.T.);+#15702=LINE('',#9919,#58);+#15703=ORIENTED_EDGE('',*,*,#15691,.F.);+#15704=ORIENTED_EDGE('',*,*,#9922,.F.);+#15705=CYLINDRICAL_SURFACE('',#15706,0.25);+#15706=AXIS2_PLACEMENT_3D('',#9927,#87,#7551);+#15707=ADVANCED_FACE('',(#15708),#15713,.F.);+#15708=FACE_BOUND('',#15709,.F.);+#15709=EDGE_LOOP('',(#15710,#9983,#15711,#15712));+#15710=ORIENTED_EDGE('',*,*,#9976,.T.);+#15711=ORIENTED_EDGE('',*,*,#15701,.F.);+#15712=ORIENTED_EDGE('',*,*,#9917,.F.);+#15713=PLANE('',#15714);+#15714=AXIS2_PLACEMENT_3D('',#9912,#14405,#7543);+#15715=ADVANCED_FACE('',(#15716),#15723,.T.);+#15716=FACE_BOUND('',#15717,.F.);+#15717=EDGE_LOOP('',(#15718,#10161,#15721,#15722));+#15718=ORIENTED_EDGE('',*,*,#15719,.T.);+#15719=EDGE_CURVE('',#10091,#10158,#15720,.T.);+#15720=LINE('',#10092,#58);+#15721=ORIENTED_EDGE('',*,*,#12018,.F.);+#15722=ORIENTED_EDGE('',*,*,#10095,.F.);+#15723=CYLINDRICAL_SURFACE('',#15724,0.25);+#15724=AXIS2_PLACEMENT_3D('',#10055,#87,#7585);+#15725=ADVANCED_FACE('',(#15726),#15733,.F.);+#15726=FACE_BOUND('',#15727,.F.);+#15727=EDGE_LOOP('',(#15728,#10156,#15731,#15732));+#15728=ORIENTED_EDGE('',*,*,#15729,.T.);+#15729=EDGE_CURVE('',#10085,#10152,#15730,.T.);+#15730=LINE('',#10086,#58);+#15731=ORIENTED_EDGE('',*,*,#15719,.F.);+#15732=ORIENTED_EDGE('',*,*,#10090,.F.);+#15733=PLANE('',#15734);+#15734=AXIS2_PLACEMENT_3D('',#10086,#14347,#7580);+#15735=ADVANCED_FACE('',(#15736),#15743,.F.);+#15736=FACE_BOUND('',#15737,.F.);+#15737=EDGE_LOOP('',(#15738,#10150,#15741,#15742));+#15738=ORIENTED_EDGE('',*,*,#15739,.T.);+#15739=EDGE_CURVE('',#10080,#10147,#15740,.T.);+#15740=LINE('',#10081,#58);+#15741=ORIENTED_EDGE('',*,*,#15729,.F.);+#15742=ORIENTED_EDGE('',*,*,#10084,.F.);+#15743=CYLINDRICAL_SURFACE('',#10088,0.1);+#15744=ADVANCED_FACE('',(#15745),#15752,.F.);+#15745=FACE_BOUND('',#15746,.F.);+#15746=EDGE_LOOP('',(#15747,#10145,#15750,#15751));+#15747=ORIENTED_EDGE('',*,*,#15748,.T.);+#15748=EDGE_CURVE('',#10075,#10142,#15749,.T.);+#15749=LINE('',#10076,#58);+#15750=ORIENTED_EDGE('',*,*,#15739,.F.);+#15751=ORIENTED_EDGE('',*,*,#10079,.F.);+#15752=PLANE('',#15753);+#15753=AXIS2_PLACEMENT_3D('',#10076,#3014,#73);+#15754=ADVANCED_FACE('',(#15755),#15762,.F.);+#15755=FACE_BOUND('',#15756,.F.);+#15756=EDGE_LOOP('',(#15757,#10140,#15760,#15761));+#15757=ORIENTED_EDGE('',*,*,#15758,.T.);+#15758=EDGE_CURVE('',#10070,#10137,#15759,.T.);+#15759=LINE('',#10071,#58);+#15760=ORIENTED_EDGE('',*,*,#15748,.F.);+#15761=ORIENTED_EDGE('',*,*,#10074,.F.);+#15762=PLANE('',#15763);+#15763=AXIS2_PLACEMENT_3D('',#10071,#73,#13);+#15764=ADVANCED_FACE('',(#15765),#15772,.F.);+#15765=FACE_BOUND('',#15766,.F.);+#15766=EDGE_LOOP('',(#15767,#10135,#15770,#15771));+#15767=ORIENTED_EDGE('',*,*,#15768,.T.);+#15768=EDGE_CURVE('',#10063,#10130,#15769,.T.);+#15769=LINE('',#10064,#58);+#15770=ORIENTED_EDGE('',*,*,#15758,.F.);+#15771=ORIENTED_EDGE('',*,*,#10069,.F.);+#15772=PLANE('',#15773);+#15773=AXIS2_PLACEMENT_3D('',#10064,#13,#28);+#15774=ADVANCED_FACE('',(#15775),#15782,.T.);+#15775=FACE_BOUND('',#15776,.F.);+#15776=EDGE_LOOP('',(#15777,#10128,#15780,#15781));+#15777=ORIENTED_EDGE('',*,*,#15778,.T.);+#15778=EDGE_CURVE('',#10058,#10125,#15779,.T.);+#15779=LINE('',#10059,#58);+#15780=ORIENTED_EDGE('',*,*,#15768,.F.);+#15781=ORIENTED_EDGE('',*,*,#10062,.F.);+#15782=CYLINDRICAL_SURFACE('',#15783,0.25);+#15783=AXIS2_PLACEMENT_3D('',#10067,#87,#7551);+#15784=ADVANCED_FACE('',(#15785),#15790,.F.);+#15785=FACE_BOUND('',#15786,.F.);+#15786=EDGE_LOOP('',(#15787,#10123,#15788,#15789));+#15787=ORIENTED_EDGE('',*,*,#10116,.T.);+#15788=ORIENTED_EDGE('',*,*,#15778,.F.);+#15789=ORIENTED_EDGE('',*,*,#10057,.F.);+#15790=PLANE('',#15791);+#15791=AXIS2_PLACEMENT_3D('',#10052,#14405,#7543);+#15792=ADVANCED_FACE('',(#15793),#15800,.T.);+#15793=FACE_BOUND('',#15794,.F.);+#15794=EDGE_LOOP('',(#15795,#10301,#15798,#15799));+#15795=ORIENTED_EDGE('',*,*,#15796,.T.);+#15796=EDGE_CURVE('',#10231,#10298,#15797,.T.);+#15797=LINE('',#10232,#58);+#15798=ORIENTED_EDGE('',*,*,#12030,.F.);+#15799=ORIENTED_EDGE('',*,*,#10235,.F.);+#15800=CYLINDRICAL_SURFACE('',#15801,0.25);+#15801=AXIS2_PLACEMENT_3D('',#10195,#87,#7585);+#15802=ADVANCED_FACE('',(#15803),#15810,.F.);+#15803=FACE_BOUND('',#15804,.F.);+#15804=EDGE_LOOP('',(#15805,#10296,#15808,#15809));+#15805=ORIENTED_EDGE('',*,*,#15806,.T.);+#15806=EDGE_CURVE('',#10225,#10292,#15807,.T.);+#15807=LINE('',#10226,#58);+#15808=ORIENTED_EDGE('',*,*,#15796,.F.);+#15809=ORIENTED_EDGE('',*,*,#10230,.F.);+#15810=PLANE('',#15811);+#15811=AXIS2_PLACEMENT_3D('',#10226,#14347,#7580);+#15812=ADVANCED_FACE('',(#15813),#15820,.F.);+#15813=FACE_BOUND('',#15814,.F.);+#15814=EDGE_LOOP('',(#15815,#10290,#15818,#15819));+#15815=ORIENTED_EDGE('',*,*,#15816,.T.);+#15816=EDGE_CURVE('',#10220,#10287,#15817,.T.);+#15817=LINE('',#10221,#58);+#15818=ORIENTED_EDGE('',*,*,#15806,.F.);+#15819=ORIENTED_EDGE('',*,*,#10224,.F.);+#15820=CYLINDRICAL_SURFACE('',#10228,0.1);+#15821=ADVANCED_FACE('',(#15822),#15829,.F.);+#15822=FACE_BOUND('',#15823,.F.);+#15823=EDGE_LOOP('',(#15824,#10285,#15827,#15828));+#15824=ORIENTED_EDGE('',*,*,#15825,.T.);+#15825=EDGE_CURVE('',#10215,#10282,#15826,.T.);+#15826=LINE('',#10216,#58);+#15827=ORIENTED_EDGE('',*,*,#15816,.F.);+#15828=ORIENTED_EDGE('',*,*,#10219,.F.);+#15829=PLANE('',#15830);+#15830=AXIS2_PLACEMENT_3D('',#10216,#3014,#73);+#15831=ADVANCED_FACE('',(#15832),#15839,.F.);+#15832=FACE_BOUND('',#15833,.F.);+#15833=EDGE_LOOP('',(#15834,#10280,#15837,#15838));+#15834=ORIENTED_EDGE('',*,*,#15835,.T.);+#15835=EDGE_CURVE('',#10210,#10277,#15836,.T.);+#15836=LINE('',#10211,#58);+#15837=ORIENTED_EDGE('',*,*,#15825,.F.);+#15838=ORIENTED_EDGE('',*,*,#10214,.F.);+#15839=PLANE('',#15840);+#15840=AXIS2_PLACEMENT_3D('',#10211,#73,#13);+#15841=ADVANCED_FACE('',(#15842),#15849,.F.);+#15842=FACE_BOUND('',#15843,.F.);+#15843=EDGE_LOOP('',(#15844,#10275,#15847,#15848));+#15844=ORIENTED_EDGE('',*,*,#15845,.T.);+#15845=EDGE_CURVE('',#10203,#10270,#15846,.T.);+#15846=LINE('',#10204,#58);+#15847=ORIENTED_EDGE('',*,*,#15835,.F.);+#15848=ORIENTED_EDGE('',*,*,#10209,.F.);+#15849=PLANE('',#15850);+#15850=AXIS2_PLACEMENT_3D('',#10204,#13,#28);+#15851=ADVANCED_FACE('',(#15852),#15859,.T.);+#15852=FACE_BOUND('',#15853,.F.);+#15853=EDGE_LOOP('',(#15854,#10268,#15857,#15858));+#15854=ORIENTED_EDGE('',*,*,#15855,.T.);+#15855=EDGE_CURVE('',#10198,#10265,#15856,.T.);+#15856=LINE('',#10199,#58);+#15857=ORIENTED_EDGE('',*,*,#15845,.F.);+#15858=ORIENTED_EDGE('',*,*,#10202,.F.);+#15859=CYLINDRICAL_SURFACE('',#15860,0.25);+#15860=AXIS2_PLACEMENT_3D('',#10207,#87,#7551);+#15861=ADVANCED_FACE('',(#15862),#15867,.F.);+#15862=FACE_BOUND('',#15863,.F.);+#15863=EDGE_LOOP('',(#15864,#10263,#15865,#15866));+#15864=ORIENTED_EDGE('',*,*,#10256,.T.);+#15865=ORIENTED_EDGE('',*,*,#15855,.F.);+#15866=ORIENTED_EDGE('',*,*,#10197,.F.);+#15867=PLANE('',#15868);+#15868=AXIS2_PLACEMENT_3D('',#10192,#14405,#7543);+#15869=ADVANCED_FACE('',(#15870),#15877,.T.);+#15870=FACE_BOUND('',#15871,.F.);+#15871=EDGE_LOOP('',(#15872,#10441,#15875,#15876));+#15872=ORIENTED_EDGE('',*,*,#15873,.T.);+#15873=EDGE_CURVE('',#10371,#10438,#15874,.T.);+#15874=LINE('',#10372,#58);+#15875=ORIENTED_EDGE('',*,*,#12042,.F.);+#15876=ORIENTED_EDGE('',*,*,#10375,.F.);+#15877=CYLINDRICAL_SURFACE('',#15878,0.25);+#15878=AXIS2_PLACEMENT_3D('',#10335,#87,#7585);+#15879=ADVANCED_FACE('',(#15880),#15887,.F.);+#15880=FACE_BOUND('',#15881,.F.);+#15881=EDGE_LOOP('',(#15882,#10436,#15885,#15886));+#15882=ORIENTED_EDGE('',*,*,#15883,.T.);+#15883=EDGE_CURVE('',#10365,#10432,#15884,.T.);+#15884=LINE('',#10366,#58);+#15885=ORIENTED_EDGE('',*,*,#15873,.F.);+#15886=ORIENTED_EDGE('',*,*,#10370,.F.);+#15887=PLANE('',#15888);+#15888=AXIS2_PLACEMENT_3D('',#10366,#14347,#7580);+#15889=ADVANCED_FACE('',(#15890),#15897,.F.);+#15890=FACE_BOUND('',#15891,.F.);+#15891=EDGE_LOOP('',(#15892,#10430,#15895,#15896));+#15892=ORIENTED_EDGE('',*,*,#15893,.T.);+#15893=EDGE_CURVE('',#10360,#10427,#15894,.T.);+#15894=LINE('',#10361,#58);+#15895=ORIENTED_EDGE('',*,*,#15883,.F.);+#15896=ORIENTED_EDGE('',*,*,#10364,.F.);+#15897=CYLINDRICAL_SURFACE('',#10368,0.1);+#15898=ADVANCED_FACE('',(#15899),#15906,.F.);+#15899=FACE_BOUND('',#15900,.F.);+#15900=EDGE_LOOP('',(#15901,#10425,#15904,#15905));+#15901=ORIENTED_EDGE('',*,*,#15902,.T.);+#15902=EDGE_CURVE('',#10355,#10422,#15903,.T.);+#15903=LINE('',#10356,#58);+#15904=ORIENTED_EDGE('',*,*,#15893,.F.);+#15905=ORIENTED_EDGE('',*,*,#10359,.F.);+#15906=PLANE('',#15907);+#15907=AXIS2_PLACEMENT_3D('',#10356,#3014,#73);+#15908=ADVANCED_FACE('',(#15909),#15916,.F.);+#15909=FACE_BOUND('',#15910,.F.);+#15910=EDGE_LOOP('',(#15911,#10420,#15914,#15915));+#15911=ORIENTED_EDGE('',*,*,#15912,.T.);+#15912=EDGE_CURVE('',#10350,#10417,#15913,.T.);+#15913=LINE('',#10351,#58);+#15914=ORIENTED_EDGE('',*,*,#15902,.F.);+#15915=ORIENTED_EDGE('',*,*,#10354,.F.);+#15916=PLANE('',#15917);+#15917=AXIS2_PLACEMENT_3D('',#10351,#73,#13);+#15918=ADVANCED_FACE('',(#15919),#15926,.F.);+#15919=FACE_BOUND('',#15920,.F.);+#15920=EDGE_LOOP('',(#15921,#10415,#15924,#15925));+#15921=ORIENTED_EDGE('',*,*,#15922,.T.);+#15922=EDGE_CURVE('',#10343,#10410,#15923,.T.);+#15923=LINE('',#10344,#58);+#15924=ORIENTED_EDGE('',*,*,#15912,.F.);+#15925=ORIENTED_EDGE('',*,*,#10349,.F.);+#15926=PLANE('',#15927);+#15927=AXIS2_PLACEMENT_3D('',#10344,#13,#28);+#15928=ADVANCED_FACE('',(#15929),#15936,.T.);+#15929=FACE_BOUND('',#15930,.F.);+#15930=EDGE_LOOP('',(#15931,#10408,#15934,#15935));+#15931=ORIENTED_EDGE('',*,*,#15932,.T.);+#15932=EDGE_CURVE('',#10338,#10405,#15933,.T.);+#15933=LINE('',#10339,#58);+#15934=ORIENTED_EDGE('',*,*,#15922,.F.);+#15935=ORIENTED_EDGE('',*,*,#10342,.F.);+#15936=CYLINDRICAL_SURFACE('',#15937,0.25);+#15937=AXIS2_PLACEMENT_3D('',#10347,#87,#7551);+#15938=ADVANCED_FACE('',(#15939),#15944,.F.);+#15939=FACE_BOUND('',#15940,.F.);+#15940=EDGE_LOOP('',(#15941,#10403,#15942,#15943));+#15941=ORIENTED_EDGE('',*,*,#10396,.T.);+#15942=ORIENTED_EDGE('',*,*,#15932,.F.);+#15943=ORIENTED_EDGE('',*,*,#10337,.F.);+#15944=PLANE('',#15945);+#15945=AXIS2_PLACEMENT_3D('',#10332,#14405,#7543);+#15946=ADVANCED_FACE('',(#15947),#15954,.T.);+#15947=FACE_BOUND('',#15948,.F.);+#15948=EDGE_LOOP('',(#15949,#10581,#15952,#15953));+#15949=ORIENTED_EDGE('',*,*,#15950,.T.);+#15950=EDGE_CURVE('',#10511,#10578,#15951,.T.);+#15951=LINE('',#10512,#58);+#15952=ORIENTED_EDGE('',*,*,#12054,.F.);+#15953=ORIENTED_EDGE('',*,*,#10515,.F.);+#15954=CYLINDRICAL_SURFACE('',#15955,0.25);+#15955=AXIS2_PLACEMENT_3D('',#10475,#87,#7585);+#15956=ADVANCED_FACE('',(#15957),#15964,.F.);+#15957=FACE_BOUND('',#15958,.F.);+#15958=EDGE_LOOP('',(#15959,#10576,#15962,#15963));+#15959=ORIENTED_EDGE('',*,*,#15960,.T.);+#15960=EDGE_CURVE('',#10505,#10572,#15961,.T.);+#15961=LINE('',#10506,#58);+#15962=ORIENTED_EDGE('',*,*,#15950,.F.);+#15963=ORIENTED_EDGE('',*,*,#10510,.F.);+#15964=PLANE('',#15965);+#15965=AXIS2_PLACEMENT_3D('',#10506,#14347,#7580);+#15966=ADVANCED_FACE('',(#15967),#15974,.F.);+#15967=FACE_BOUND('',#15968,.F.);+#15968=EDGE_LOOP('',(#15969,#10570,#15972,#15973));+#15969=ORIENTED_EDGE('',*,*,#15970,.T.);+#15970=EDGE_CURVE('',#10500,#10567,#15971,.T.);+#15971=LINE('',#10501,#58);+#15972=ORIENTED_EDGE('',*,*,#15960,.F.);+#15973=ORIENTED_EDGE('',*,*,#10504,.F.);+#15974=CYLINDRICAL_SURFACE('',#10508,0.1);+#15975=ADVANCED_FACE('',(#15976),#15983,.F.);+#15976=FACE_BOUND('',#15977,.F.);+#15977=EDGE_LOOP('',(#15978,#10565,#15981,#15982));+#15978=ORIENTED_EDGE('',*,*,#15979,.T.);+#15979=EDGE_CURVE('',#10495,#10562,#15980,.T.);+#15980=LINE('',#10496,#58);+#15981=ORIENTED_EDGE('',*,*,#15970,.F.);+#15982=ORIENTED_EDGE('',*,*,#10499,.F.);+#15983=PLANE('',#15984);+#15984=AXIS2_PLACEMENT_3D('',#10496,#3014,#73);+#15985=ADVANCED_FACE('',(#15986),#15993,.F.);+#15986=FACE_BOUND('',#15987,.F.);+#15987=EDGE_LOOP('',(#15988,#10560,#15991,#15992));+#15988=ORIENTED_EDGE('',*,*,#15989,.T.);+#15989=EDGE_CURVE('',#10490,#10557,#15990,.T.);+#15990=LINE('',#10491,#58);+#15991=ORIENTED_EDGE('',*,*,#15979,.F.);+#15992=ORIENTED_EDGE('',*,*,#10494,.F.);+#15993=PLANE('',#15994);+#15994=AXIS2_PLACEMENT_3D('',#10491,#73,#13);+#15995=ADVANCED_FACE('',(#15996),#16003,.F.);+#15996=FACE_BOUND('',#15997,.F.);+#15997=EDGE_LOOP('',(#15998,#10555,#16001,#16002));+#15998=ORIENTED_EDGE('',*,*,#15999,.T.);+#15999=EDGE_CURVE('',#10483,#10550,#16000,.T.);+#16000=LINE('',#10484,#58);+#16001=ORIENTED_EDGE('',*,*,#15989,.F.);+#16002=ORIENTED_EDGE('',*,*,#10489,.F.);+#16003=PLANE('',#16004);+#16004=AXIS2_PLACEMENT_3D('',#10484,#13,#28);+#16005=ADVANCED_FACE('',(#16006),#16013,.T.);+#16006=FACE_BOUND('',#16007,.F.);+#16007=EDGE_LOOP('',(#16008,#10548,#16011,#16012));+#16008=ORIENTED_EDGE('',*,*,#16009,.T.);+#16009=EDGE_CURVE('',#10478,#10545,#16010,.T.);+#16010=LINE('',#10479,#58);+#16011=ORIENTED_EDGE('',*,*,#15999,.F.);+#16012=ORIENTED_EDGE('',*,*,#10482,.F.);+#16013=CYLINDRICAL_SURFACE('',#16014,0.25);+#16014=AXIS2_PLACEMENT_3D('',#10487,#87,#7551);+#16015=ADVANCED_FACE('',(#16016),#16021,.F.);+#16016=FACE_BOUND('',#16017,.F.);+#16017=EDGE_LOOP('',(#16018,#10543,#16019,#16020));+#16018=ORIENTED_EDGE('',*,*,#10536,.T.);+#16019=ORIENTED_EDGE('',*,*,#16009,.F.);+#16020=ORIENTED_EDGE('',*,*,#10477,.F.);+#16021=PLANE('',#16022);+#16022=AXIS2_PLACEMENT_3D('',#10472,#14405,#7543);+#16023=ADVANCED_FACE('',(#16024),#16031,.T.);+#16024=FACE_BOUND('',#16025,.F.);+#16025=EDGE_LOOP('',(#16026,#10721,#16029,#16030));+#16026=ORIENTED_EDGE('',*,*,#16027,.T.);+#16027=EDGE_CURVE('',#10651,#10718,#16028,.T.);+#16028=LINE('',#10652,#58);+#16029=ORIENTED_EDGE('',*,*,#12066,.F.);+#16030=ORIENTED_EDGE('',*,*,#10655,.F.);+#16031=CYLINDRICAL_SURFACE('',#16032,0.25);+#16032=AXIS2_PLACEMENT_3D('',#10615,#87,#7585);+#16033=ADVANCED_FACE('',(#16034),#16041,.F.);+#16034=FACE_BOUND('',#16035,.F.);+#16035=EDGE_LOOP('',(#16036,#10716,#16039,#16040));+#16036=ORIENTED_EDGE('',*,*,#16037,.T.);+#16037=EDGE_CURVE('',#10645,#10712,#16038,.T.);+#16038=LINE('',#10646,#58);+#16039=ORIENTED_EDGE('',*,*,#16027,.F.);+#16040=ORIENTED_EDGE('',*,*,#10650,.F.);+#16041=PLANE('',#16042);+#16042=AXIS2_PLACEMENT_3D('',#10646,#14347,#7580);+#16043=ADVANCED_FACE('',(#16044),#16051,.F.);+#16044=FACE_BOUND('',#16045,.F.);+#16045=EDGE_LOOP('',(#16046,#10710,#16049,#16050));+#16046=ORIENTED_EDGE('',*,*,#16047,.T.);+#16047=EDGE_CURVE('',#10640,#10707,#16048,.T.);+#16048=LINE('',#10641,#58);+#16049=ORIENTED_EDGE('',*,*,#16037,.F.);+#16050=ORIENTED_EDGE('',*,*,#10644,.F.);+#16051=CYLINDRICAL_SURFACE('',#10648,0.1);+#16052=ADVANCED_FACE('',(#16053),#16060,.F.);+#16053=FACE_BOUND('',#16054,.F.);+#16054=EDGE_LOOP('',(#16055,#10705,#16058,#16059));+#16055=ORIENTED_EDGE('',*,*,#16056,.T.);+#16056=EDGE_CURVE('',#10635,#10702,#16057,.T.);+#16057=LINE('',#10636,#58);+#16058=ORIENTED_EDGE('',*,*,#16047,.F.);+#16059=ORIENTED_EDGE('',*,*,#10639,.F.);+#16060=PLANE('',#16061);+#16061=AXIS2_PLACEMENT_3D('',#10636,#3014,#73);+#16062=ADVANCED_FACE('',(#16063),#16070,.F.);+#16063=FACE_BOUND('',#16064,.F.);+#16064=EDGE_LOOP('',(#16065,#10700,#16068,#16069));+#16065=ORIENTED_EDGE('',*,*,#16066,.T.);+#16066=EDGE_CURVE('',#10630,#10697,#16067,.T.);+#16067=LINE('',#10631,#58);+#16068=ORIENTED_EDGE('',*,*,#16056,.F.);+#16069=ORIENTED_EDGE('',*,*,#10634,.F.);+#16070=PLANE('',#16071);+#16071=AXIS2_PLACEMENT_3D('',#10631,#73,#13);+#16072=ADVANCED_FACE('',(#16073),#16080,.F.);+#16073=FACE_BOUND('',#16074,.F.);+#16074=EDGE_LOOP('',(#16075,#10695,#16078,#16079));+#16075=ORIENTED_EDGE('',*,*,#16076,.T.);+#16076=EDGE_CURVE('',#10623,#10690,#16077,.T.);+#16077=LINE('',#10624,#58);+#16078=ORIENTED_EDGE('',*,*,#16066,.F.);+#16079=ORIENTED_EDGE('',*,*,#10629,.F.);+#16080=PLANE('',#16081);+#16081=AXIS2_PLACEMENT_3D('',#10624,#13,#28);+#16082=ADVANCED_FACE('',(#16083),#16090,.T.);+#16083=FACE_BOUND('',#16084,.F.);+#16084=EDGE_LOOP('',(#16085,#10688,#16088,#16089));+#16085=ORIENTED_EDGE('',*,*,#16086,.T.);+#16086=EDGE_CURVE('',#10618,#10685,#16087,.T.);+#16087=LINE('',#10619,#58);+#16088=ORIENTED_EDGE('',*,*,#16076,.F.);+#16089=ORIENTED_EDGE('',*,*,#10622,.F.);+#16090=CYLINDRICAL_SURFACE('',#16091,0.25);+#16091=AXIS2_PLACEMENT_3D('',#10627,#87,#7551);+#16092=ADVANCED_FACE('',(#16093),#16098,.F.);+#16093=FACE_BOUND('',#16094,.F.);+#16094=EDGE_LOOP('',(#16095,#10683,#16096,#16097));+#16095=ORIENTED_EDGE('',*,*,#10676,.T.);+#16096=ORIENTED_EDGE('',*,*,#16086,.F.);+#16097=ORIENTED_EDGE('',*,*,#10617,.F.);+#16098=PLANE('',#16099);+#16099=AXIS2_PLACEMENT_3D('',#10612,#14405,#7543);+#16100=ADVANCED_FACE('',(#16101),#16108,.T.);+#16101=FACE_BOUND('',#16102,.F.);+#16102=EDGE_LOOP('',(#16103,#10861,#16106,#16107));+#16103=ORIENTED_EDGE('',*,*,#16104,.T.);+#16104=EDGE_CURVE('',#10791,#10858,#16105,.T.);+#16105=LINE('',#10792,#58);+#16106=ORIENTED_EDGE('',*,*,#12078,.F.);+#16107=ORIENTED_EDGE('',*,*,#10795,.F.);+#16108=CYLINDRICAL_SURFACE('',#16109,0.25);+#16109=AXIS2_PLACEMENT_3D('',#10755,#87,#7585);+#16110=ADVANCED_FACE('',(#16111),#16118,.F.);+#16111=FACE_BOUND('',#16112,.F.);+#16112=EDGE_LOOP('',(#16113,#10856,#16116,#16117));+#16113=ORIENTED_EDGE('',*,*,#16114,.T.);+#16114=EDGE_CURVE('',#10785,#10852,#16115,.T.);+#16115=LINE('',#10786,#58);+#16116=ORIENTED_EDGE('',*,*,#16104,.F.);+#16117=ORIENTED_EDGE('',*,*,#10790,.F.);+#16118=PLANE('',#16119);+#16119=AXIS2_PLACEMENT_3D('',#10786,#14347,#7580);+#16120=ADVANCED_FACE('',(#16121),#16128,.F.);+#16121=FACE_BOUND('',#16122,.F.);+#16122=EDGE_LOOP('',(#16123,#10850,#16126,#16127));+#16123=ORIENTED_EDGE('',*,*,#16124,.T.);+#16124=EDGE_CURVE('',#10780,#10847,#16125,.T.);+#16125=LINE('',#10781,#58);+#16126=ORIENTED_EDGE('',*,*,#16114,.F.);+#16127=ORIENTED_EDGE('',*,*,#10784,.F.);+#16128=CYLINDRICAL_SURFACE('',#10788,0.1);+#16129=ADVANCED_FACE('',(#16130),#16137,.F.);+#16130=FACE_BOUND('',#16131,.F.);+#16131=EDGE_LOOP('',(#16132,#10845,#16135,#16136));+#16132=ORIENTED_EDGE('',*,*,#16133,.T.);+#16133=EDGE_CURVE('',#10775,#10842,#16134,.T.);+#16134=LINE('',#10776,#58);+#16135=ORIENTED_EDGE('',*,*,#16124,.F.);+#16136=ORIENTED_EDGE('',*,*,#10779,.F.);+#16137=PLANE('',#16138);+#16138=AXIS2_PLACEMENT_3D('',#10776,#3014,#73);+#16139=ADVANCED_FACE('',(#16140),#16147,.F.);+#16140=FACE_BOUND('',#16141,.F.);+#16141=EDGE_LOOP('',(#16142,#10840,#16145,#16146));+#16142=ORIENTED_EDGE('',*,*,#16143,.T.);+#16143=EDGE_CURVE('',#10770,#10837,#16144,.T.);+#16144=LINE('',#10771,#58);+#16145=ORIENTED_EDGE('',*,*,#16133,.F.);+#16146=ORIENTED_EDGE('',*,*,#10774,.F.);+#16147=PLANE('',#16148);+#16148=AXIS2_PLACEMENT_3D('',#10771,#73,#13);+#16149=ADVANCED_FACE('',(#16150),#16157,.F.);+#16150=FACE_BOUND('',#16151,.F.);+#16151=EDGE_LOOP('',(#16152,#10835,#16155,#16156));+#16152=ORIENTED_EDGE('',*,*,#16153,.T.);+#16153=EDGE_CURVE('',#10763,#10830,#16154,.T.);+#16154=LINE('',#10764,#58);+#16155=ORIENTED_EDGE('',*,*,#16143,.F.);+#16156=ORIENTED_EDGE('',*,*,#10769,.F.);+#16157=PLANE('',#16158);+#16158=AXIS2_PLACEMENT_3D('',#10764,#13,#28);+#16159=ADVANCED_FACE('',(#16160),#16167,.T.);+#16160=FACE_BOUND('',#16161,.F.);+#16161=EDGE_LOOP('',(#16162,#10828,#16165,#16166));+#16162=ORIENTED_EDGE('',*,*,#16163,.T.);+#16163=EDGE_CURVE('',#10758,#10825,#16164,.T.);+#16164=LINE('',#10759,#58);+#16165=ORIENTED_EDGE('',*,*,#16153,.F.);+#16166=ORIENTED_EDGE('',*,*,#10762,.F.);+#16167=CYLINDRICAL_SURFACE('',#16168,0.25);+#16168=AXIS2_PLACEMENT_3D('',#10767,#87,#7551);+#16169=ADVANCED_FACE('',(#16170),#16175,.F.);+#16170=FACE_BOUND('',#16171,.F.);+#16171=EDGE_LOOP('',(#16172,#10823,#16173,#16174));+#16172=ORIENTED_EDGE('',*,*,#10816,.T.);+#16173=ORIENTED_EDGE('',*,*,#16163,.F.);+#16174=ORIENTED_EDGE('',*,*,#10757,.F.);+#16175=PLANE('',#16176);+#16176=AXIS2_PLACEMENT_3D('',#10752,#14405,#7543);+#16177=ADVANCED_FACE('',(#16178),#16185,.T.);+#16178=FACE_BOUND('',#16179,.F.);+#16179=EDGE_LOOP('',(#16180,#11001,#16183,#16184));+#16180=ORIENTED_EDGE('',*,*,#16181,.T.);+#16181=EDGE_CURVE('',#10931,#10998,#16182,.T.);+#16182=LINE('',#10932,#58);+#16183=ORIENTED_EDGE('',*,*,#12090,.F.);+#16184=ORIENTED_EDGE('',*,*,#10935,.F.);+#16185=CYLINDRICAL_SURFACE('',#16186,0.25);+#16186=AXIS2_PLACEMENT_3D('',#10895,#87,#7585);+#16187=ADVANCED_FACE('',(#16188),#16195,.F.);+#16188=FACE_BOUND('',#16189,.F.);+#16189=EDGE_LOOP('',(#16190,#10996,#16193,#16194));+#16190=ORIENTED_EDGE('',*,*,#16191,.T.);+#16191=EDGE_CURVE('',#10925,#10992,#16192,.T.);+#16192=LINE('',#10926,#58);+#16193=ORIENTED_EDGE('',*,*,#16181,.F.);+#16194=ORIENTED_EDGE('',*,*,#10930,.F.);+#16195=PLANE('',#16196);+#16196=AXIS2_PLACEMENT_3D('',#10926,#14347,#7580);+#16197=ADVANCED_FACE('',(#16198),#16205,.F.);+#16198=FACE_BOUND('',#16199,.F.);+#16199=EDGE_LOOP('',(#16200,#10990,#16203,#16204));+#16200=ORIENTED_EDGE('',*,*,#16201,.T.);+#16201=EDGE_CURVE('',#10920,#10987,#16202,.T.);+#16202=LINE('',#10921,#58);+#16203=ORIENTED_EDGE('',*,*,#16191,.F.);+#16204=ORIENTED_EDGE('',*,*,#10924,.F.);+#16205=CYLINDRICAL_SURFACE('',#10928,0.1);+#16206=ADVANCED_FACE('',(#16207),#16214,.F.);+#16207=FACE_BOUND('',#16208,.F.);+#16208=EDGE_LOOP('',(#16209,#10985,#16212,#16213));+#16209=ORIENTED_EDGE('',*,*,#16210,.T.);+#16210=EDGE_CURVE('',#10915,#10982,#16211,.T.);+#16211=LINE('',#10916,#58);+#16212=ORIENTED_EDGE('',*,*,#16201,.F.);+#16213=ORIENTED_EDGE('',*,*,#10919,.F.);+#16214=PLANE('',#16215);+#16215=AXIS2_PLACEMENT_3D('',#10916,#3014,#73);+#16216=ADVANCED_FACE('',(#16217),#16224,.F.);+#16217=FACE_BOUND('',#16218,.F.);+#16218=EDGE_LOOP('',(#16219,#10980,#16222,#16223));+#16219=ORIENTED_EDGE('',*,*,#16220,.T.);+#16220=EDGE_CURVE('',#10910,#10977,#16221,.T.);+#16221=LINE('',#10911,#58);+#16222=ORIENTED_EDGE('',*,*,#16210,.F.);+#16223=ORIENTED_EDGE('',*,*,#10914,.F.);+#16224=PLANE('',#16225);+#16225=AXIS2_PLACEMENT_3D('',#10911,#73,#13);+#16226=ADVANCED_FACE('',(#16227),#16234,.F.);+#16227=FACE_BOUND('',#16228,.F.);+#16228=EDGE_LOOP('',(#16229,#10975,#16232,#16233));+#16229=ORIENTED_EDGE('',*,*,#16230,.T.);+#16230=EDGE_CURVE('',#10903,#10970,#16231,.T.);+#16231=LINE('',#10904,#58);+#16232=ORIENTED_EDGE('',*,*,#16220,.F.);+#16233=ORIENTED_EDGE('',*,*,#10909,.F.);+#16234=PLANE('',#16235);+#16235=AXIS2_PLACEMENT_3D('',#10904,#13,#28);+#16236=ADVANCED_FACE('',(#16237),#16244,.T.);+#16237=FACE_BOUND('',#16238,.F.);+#16238=EDGE_LOOP('',(#16239,#10968,#16242,#16243));+#16239=ORIENTED_EDGE('',*,*,#16240,.T.);+#16240=EDGE_CURVE('',#10898,#10965,#16241,.T.);+#16241=LINE('',#10899,#58);+#16242=ORIENTED_EDGE('',*,*,#16230,.F.);+#16243=ORIENTED_EDGE('',*,*,#10902,.F.);+#16244=CYLINDRICAL_SURFACE('',#16245,0.25);+#16245=AXIS2_PLACEMENT_3D('',#10907,#87,#7551);+#16246=ADVANCED_FACE('',(#16247),#16252,.F.);+#16247=FACE_BOUND('',#16248,.F.);+#16248=EDGE_LOOP('',(#16249,#10963,#16250,#16251));+#16249=ORIENTED_EDGE('',*,*,#10956,.T.);+#16250=ORIENTED_EDGE('',*,*,#16240,.F.);+#16251=ORIENTED_EDGE('',*,*,#10897,.F.);+#16252=PLANE('',#16253);+#16253=AXIS2_PLACEMENT_3D('',#10892,#14405,#7543);+#16254=ADVANCED_FACE('',(#16255),#16262,.T.);+#16255=FACE_BOUND('',#16256,.F.);+#16256=EDGE_LOOP('',(#16257,#11141,#16260,#16261));+#16257=ORIENTED_EDGE('',*,*,#16258,.T.);+#16258=EDGE_CURVE('',#11071,#11138,#16259,.T.);+#16259=LINE('',#11072,#58);+#16260=ORIENTED_EDGE('',*,*,#12102,.F.);+#16261=ORIENTED_EDGE('',*,*,#11075,.F.);+#16262=CYLINDRICAL_SURFACE('',#16263,0.25);+#16263=AXIS2_PLACEMENT_3D('',#11035,#87,#7585);+#16264=ADVANCED_FACE('',(#16265),#16272,.F.);+#16265=FACE_BOUND('',#16266,.F.);+#16266=EDGE_LOOP('',(#16267,#11136,#16270,#16271));+#16267=ORIENTED_EDGE('',*,*,#16268,.T.);+#16268=EDGE_CURVE('',#11065,#11132,#16269,.T.);+#16269=LINE('',#11066,#58);+#16270=ORIENTED_EDGE('',*,*,#16258,.F.);+#16271=ORIENTED_EDGE('',*,*,#11070,.F.);+#16272=PLANE('',#16273);+#16273=AXIS2_PLACEMENT_3D('',#11066,#14347,#7580);+#16274=ADVANCED_FACE('',(#16275),#16282,.F.);+#16275=FACE_BOUND('',#16276,.F.);+#16276=EDGE_LOOP('',(#16277,#11130,#16280,#16281));+#16277=ORIENTED_EDGE('',*,*,#16278,.T.);+#16278=EDGE_CURVE('',#11060,#11127,#16279,.T.);+#16279=LINE('',#11061,#58);+#16280=ORIENTED_EDGE('',*,*,#16268,.F.);+#16281=ORIENTED_EDGE('',*,*,#11064,.F.);+#16282=CYLINDRICAL_SURFACE('',#11068,0.1);+#16283=ADVANCED_FACE('',(#16284),#16291,.F.);+#16284=FACE_BOUND('',#16285,.F.);+#16285=EDGE_LOOP('',(#16286,#11125,#16289,#16290));+#16286=ORIENTED_EDGE('',*,*,#16287,.T.);+#16287=EDGE_CURVE('',#11055,#11122,#16288,.T.);+#16288=LINE('',#11056,#58);+#16289=ORIENTED_EDGE('',*,*,#16278,.F.);+#16290=ORIENTED_EDGE('',*,*,#11059,.F.);+#16291=PLANE('',#16292);+#16292=AXIS2_PLACEMENT_3D('',#11056,#3014,#73);+#16293=ADVANCED_FACE('',(#16294),#16301,.F.);+#16294=FACE_BOUND('',#16295,.F.);+#16295=EDGE_LOOP('',(#16296,#11120,#16299,#16300));+#16296=ORIENTED_EDGE('',*,*,#16297,.T.);+#16297=EDGE_CURVE('',#11050,#11117,#16298,.T.);+#16298=LINE('',#11051,#58);+#16299=ORIENTED_EDGE('',*,*,#16287,.F.);+#16300=ORIENTED_EDGE('',*,*,#11054,.F.);+#16301=PLANE('',#16302);+#16302=AXIS2_PLACEMENT_3D('',#11051,#73,#13);+#16303=ADVANCED_FACE('',(#16304),#16311,.F.);+#16304=FACE_BOUND('',#16305,.F.);+#16305=EDGE_LOOP('',(#16306,#11115,#16309,#16310));+#16306=ORIENTED_EDGE('',*,*,#16307,.T.);+#16307=EDGE_CURVE('',#11043,#11110,#16308,.T.);+#16308=LINE('',#11044,#58);+#16309=ORIENTED_EDGE('',*,*,#16297,.F.);+#16310=ORIENTED_EDGE('',*,*,#11049,.F.);+#16311=PLANE('',#16312);+#16312=AXIS2_PLACEMENT_3D('',#11044,#13,#28);+#16313=ADVANCED_FACE('',(#16314),#16321,.T.);+#16314=FACE_BOUND('',#16315,.F.);+#16315=EDGE_LOOP('',(#16316,#11108,#16319,#16320));+#16316=ORIENTED_EDGE('',*,*,#16317,.T.);+#16317=EDGE_CURVE('',#11038,#11105,#16318,.T.);+#16318=LINE('',#11039,#58);+#16319=ORIENTED_EDGE('',*,*,#16307,.F.);+#16320=ORIENTED_EDGE('',*,*,#11042,.F.);+#16321=CYLINDRICAL_SURFACE('',#16322,0.25);+#16322=AXIS2_PLACEMENT_3D('',#11047,#87,#7551);+#16323=ADVANCED_FACE('',(#16324),#16329,.F.);+#16324=FACE_BOUND('',#16325,.F.);+#16325=EDGE_LOOP('',(#16326,#11103,#16327,#16328));+#16326=ORIENTED_EDGE('',*,*,#11096,.T.);+#16327=ORIENTED_EDGE('',*,*,#16317,.F.);+#16328=ORIENTED_EDGE('',*,*,#11037,.F.);+#16329=PLANE('',#16330);+#16330=AXIS2_PLACEMENT_3D('',#11032,#14405,#7543);+#16331=ADVANCED_FACE('',(#16332),#16339,.T.);+#16332=FACE_BOUND('',#16333,.F.);+#16333=EDGE_LOOP('',(#16334,#11281,#16337,#16338));+#16334=ORIENTED_EDGE('',*,*,#16335,.T.);+#16335=EDGE_CURVE('',#11211,#11278,#16336,.T.);+#16336=LINE('',#11212,#58);+#16337=ORIENTED_EDGE('',*,*,#12114,.F.);+#16338=ORIENTED_EDGE('',*,*,#11215,.F.);+#16339=CYLINDRICAL_SURFACE('',#16340,0.25);+#16340=AXIS2_PLACEMENT_3D('',#11175,#87,#7585);+#16341=ADVANCED_FACE('',(#16342),#16349,.F.);+#16342=FACE_BOUND('',#16343,.F.);+#16343=EDGE_LOOP('',(#16344,#11276,#16347,#16348));+#16344=ORIENTED_EDGE('',*,*,#16345,.T.);+#16345=EDGE_CURVE('',#11205,#11272,#16346,.T.);+#16346=LINE('',#11206,#58);+#16347=ORIENTED_EDGE('',*,*,#16335,.F.);+#16348=ORIENTED_EDGE('',*,*,#11210,.F.);+#16349=PLANE('',#16350);+#16350=AXIS2_PLACEMENT_3D('',#11206,#14347,#7580);+#16351=ADVANCED_FACE('',(#16352),#16359,.F.);+#16352=FACE_BOUND('',#16353,.F.);+#16353=EDGE_LOOP('',(#16354,#11270,#16357,#16358));+#16354=ORIENTED_EDGE('',*,*,#16355,.T.);+#16355=EDGE_CURVE('',#11200,#11267,#16356,.T.);+#16356=LINE('',#11201,#58);+#16357=ORIENTED_EDGE('',*,*,#16345,.F.);+#16358=ORIENTED_EDGE('',*,*,#11204,.F.);+#16359=CYLINDRICAL_SURFACE('',#11208,0.1);+#16360=ADVANCED_FACE('',(#16361),#16368,.F.);+#16361=FACE_BOUND('',#16362,.F.);+#16362=EDGE_LOOP('',(#16363,#11265,#16366,#16367));+#16363=ORIENTED_EDGE('',*,*,#16364,.T.);+#16364=EDGE_CURVE('',#11195,#11262,#16365,.T.);+#16365=LINE('',#11196,#58);+#16366=ORIENTED_EDGE('',*,*,#16355,.F.);+#16367=ORIENTED_EDGE('',*,*,#11199,.F.);+#16368=PLANE('',#16369);+#16369=AXIS2_PLACEMENT_3D('',#11196,#3014,#73);+#16370=ADVANCED_FACE('',(#16371),#16378,.F.);+#16371=FACE_BOUND('',#16372,.F.);+#16372=EDGE_LOOP('',(#16373,#11260,#16376,#16377));+#16373=ORIENTED_EDGE('',*,*,#16374,.T.);+#16374=EDGE_CURVE('',#11190,#11257,#16375,.T.);+#16375=LINE('',#11191,#58);+#16376=ORIENTED_EDGE('',*,*,#16364,.F.);+#16377=ORIENTED_EDGE('',*,*,#11194,.F.);+#16378=PLANE('',#16379);+#16379=AXIS2_PLACEMENT_3D('',#11191,#73,#13);+#16380=ADVANCED_FACE('',(#16381),#16388,.F.);+#16381=FACE_BOUND('',#16382,.F.);+#16382=EDGE_LOOP('',(#16383,#11255,#16386,#16387));+#16383=ORIENTED_EDGE('',*,*,#16384,.T.);+#16384=EDGE_CURVE('',#11183,#11250,#16385,.T.);+#16385=LINE('',#11184,#58);+#16386=ORIENTED_EDGE('',*,*,#16374,.F.);+#16387=ORIENTED_EDGE('',*,*,#11189,.F.);+#16388=PLANE('',#16389);+#16389=AXIS2_PLACEMENT_3D('',#11184,#13,#28);+#16390=ADVANCED_FACE('',(#16391),#16398,.T.);+#16391=FACE_BOUND('',#16392,.F.);+#16392=EDGE_LOOP('',(#16393,#11248,#16396,#16397));+#16393=ORIENTED_EDGE('',*,*,#16394,.T.);+#16394=EDGE_CURVE('',#11178,#11245,#16395,.T.);+#16395=LINE('',#11179,#58);+#16396=ORIENTED_EDGE('',*,*,#16384,.F.);+#16397=ORIENTED_EDGE('',*,*,#11182,.F.);+#16398=CYLINDRICAL_SURFACE('',#16399,0.25);+#16399=AXIS2_PLACEMENT_3D('',#11187,#87,#7551);+#16400=ADVANCED_FACE('',(#16401),#16406,.F.);+#16401=FACE_BOUND('',#16402,.F.);+#16402=EDGE_LOOP('',(#16403,#11243,#16404,#16405));+#16403=ORIENTED_EDGE('',*,*,#11236,.T.);+#16404=ORIENTED_EDGE('',*,*,#16394,.F.);+#16405=ORIENTED_EDGE('',*,*,#11177,.F.);+#16406=PLANE('',#16407);+#16407=AXIS2_PLACEMENT_3D('',#11172,#14405,#7543);+#16408=ADVANCED_FACE('',(#16409),#16416,.T.);+#16409=FACE_BOUND('',#16410,.F.);+#16410=EDGE_LOOP('',(#16411,#11421,#16414,#16415));+#16411=ORIENTED_EDGE('',*,*,#16412,.T.);+#16412=EDGE_CURVE('',#11351,#11418,#16413,.T.);+#16413=LINE('',#11352,#58);+#16414=ORIENTED_EDGE('',*,*,#12126,.F.);+#16415=ORIENTED_EDGE('',*,*,#11355,.F.);+#16416=CYLINDRICAL_SURFACE('',#16417,0.25);+#16417=AXIS2_PLACEMENT_3D('',#11315,#87,#7585);+#16418=ADVANCED_FACE('',(#16419),#16426,.F.);+#16419=FACE_BOUND('',#16420,.F.);+#16420=EDGE_LOOP('',(#16421,#11416,#16424,#16425));+#16421=ORIENTED_EDGE('',*,*,#16422,.T.);+#16422=EDGE_CURVE('',#11345,#11412,#16423,.T.);+#16423=LINE('',#11346,#58);+#16424=ORIENTED_EDGE('',*,*,#16412,.F.);+#16425=ORIENTED_EDGE('',*,*,#11350,.F.);+#16426=PLANE('',#16427);+#16427=AXIS2_PLACEMENT_3D('',#11346,#14347,#7580);+#16428=ADVANCED_FACE('',(#16429),#16436,.F.);+#16429=FACE_BOUND('',#16430,.F.);+#16430=EDGE_LOOP('',(#16431,#11410,#16434,#16435));+#16431=ORIENTED_EDGE('',*,*,#16432,.T.);+#16432=EDGE_CURVE('',#11340,#11407,#16433,.T.);+#16433=LINE('',#11341,#58);+#16434=ORIENTED_EDGE('',*,*,#16422,.F.);+#16435=ORIENTED_EDGE('',*,*,#11344,.F.);+#16436=CYLINDRICAL_SURFACE('',#11348,0.1);+#16437=ADVANCED_FACE('',(#16438),#16445,.F.);+#16438=FACE_BOUND('',#16439,.F.);+#16439=EDGE_LOOP('',(#16440,#11405,#16443,#16444));+#16440=ORIENTED_EDGE('',*,*,#16441,.T.);+#16441=EDGE_CURVE('',#11335,#11402,#16442,.T.);+#16442=LINE('',#11336,#58);+#16443=ORIENTED_EDGE('',*,*,#16432,.F.);+#16444=ORIENTED_EDGE('',*,*,#11339,.F.);+#16445=PLANE('',#16446);+#16446=AXIS2_PLACEMENT_3D('',#11336,#3014,#73);+#16447=ADVANCED_FACE('',(#16448),#16455,.F.);+#16448=FACE_BOUND('',#16449,.F.);+#16449=EDGE_LOOP('',(#16450,#11400,#16453,#16454));+#16450=ORIENTED_EDGE('',*,*,#16451,.T.);+#16451=EDGE_CURVE('',#11330,#11397,#16452,.T.);+#16452=LINE('',#11331,#58);+#16453=ORIENTED_EDGE('',*,*,#16441,.F.);+#16454=ORIENTED_EDGE('',*,*,#11334,.F.);+#16455=PLANE('',#16456);+#16456=AXIS2_PLACEMENT_3D('',#11331,#73,#13);+#16457=ADVANCED_FACE('',(#16458),#16465,.F.);+#16458=FACE_BOUND('',#16459,.F.);+#16459=EDGE_LOOP('',(#16460,#11395,#16463,#16464));+#16460=ORIENTED_EDGE('',*,*,#16461,.T.);+#16461=EDGE_CURVE('',#11323,#11390,#16462,.T.);+#16462=LINE('',#11324,#58);+#16463=ORIENTED_EDGE('',*,*,#16451,.F.);+#16464=ORIENTED_EDGE('',*,*,#11329,.F.);+#16465=PLANE('',#16466);+#16466=AXIS2_PLACEMENT_3D('',#11324,#13,#28);+#16467=ADVANCED_FACE('',(#16468),#16475,.T.);+#16468=FACE_BOUND('',#16469,.F.);+#16469=EDGE_LOOP('',(#16470,#11388,#16473,#16474));+#16470=ORIENTED_EDGE('',*,*,#16471,.T.);+#16471=EDGE_CURVE('',#11318,#11385,#16472,.T.);+#16472=LINE('',#11319,#58);+#16473=ORIENTED_EDGE('',*,*,#16461,.F.);+#16474=ORIENTED_EDGE('',*,*,#11322,.F.);+#16475=CYLINDRICAL_SURFACE('',#16476,0.25);+#16476=AXIS2_PLACEMENT_3D('',#11327,#87,#7551);+#16477=ADVANCED_FACE('',(#16478),#16483,.F.);+#16478=FACE_BOUND('',#16479,.F.);+#16479=EDGE_LOOP('',(#16480,#11383,#16481,#16482));+#16480=ORIENTED_EDGE('',*,*,#11376,.T.);+#16481=ORIENTED_EDGE('',*,*,#16471,.F.);+#16482=ORIENTED_EDGE('',*,*,#11317,.F.);+#16483=PLANE('',#16484);+#16484=AXIS2_PLACEMENT_3D('',#11312,#14405,#7543);+#16485=ADVANCED_FACE('',(#16486),#16487,.F.);+#16486=FACE_BOUND('',#11787,.T.);+#16487=PLANE('',#16488);+#16488=AXIS2_PLACEMENT_3D('',#11794,#3014,#59);+#16489=( GEOMETRIC_REPRESENTATION_CONTEXT(3) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#16493)) GLOBAL_UNIT_ASSIGNED_CONTEXT((#16490,#16491,#16492)) REPRESENTATION_CONTEXT('Context #1','3D Context with UNIT and UNCERTAINTY') );+#16490=( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );+#16491=( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );+#16492=( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );+#16493=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#16490,'distance_accuracy_value','confusion accuracy');+#16494=PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#7));+#16495=MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(#16496,#16506,#16507,#16508,#16509,#16510,#16511,#16512,#16513,#16514,#16515,#16516,#16517,#16518,#16519,#16528,#16529,#16530,#16531,#16532,#16533,#16534,#16535,#16536,#16537,#16538,#16539,#16540,#16541,#16542,#16543,#16544,#16545,#16546,#16547,#16548,#16549,#16550,#16551,#16552,#16553,#16554,#16555,#16556,#16557,#16558,#16559,#16560,#16561,#16562,#16563,#16564,#16565,#16566,#16567,#16568,#16569,#16570,#16571,#16572,#16573,#16574,#16575,#16576,#16577,#16578,#16579,#16580,#16581,#16582,#16583,#16584,#16585,#16586,#16587,#16588,#16589,#16590,#16591,#16592,#16593,#16594,#16595,#16596,#16597,#16598,#16599,#16600,#16601,#16602,#16603,#16604,#16605,#16606,#16607,#16608,#16609,#16610,#16611,#16612,#16613,#16614,#16615,#16616,#16617,#16618,#16619,#16620,#16621,#16622,#16623,#16624,#16625,#16626,#16627,#16628,#16629,#16630,#16631,#16632,#16633,#16634,#16635,#16636,#16637,#16638,#16639,#16640,#16641,#16642,#16643,#16644,#16645,#16646,#16647,#16648,#16649,#16650,#16651,#16652,#16653,#16654,#16655,#16656,#16657,#16658,#16659,#16660,#16661,#16662,#16663,#16664,#16665,#16666,#16667,#16668,#16669,#16670,#16671,#16672,#16673,#16674,#16675,#16676,#16677,#16678,#16679,#16680,#16681,#16682,#16683,#16684,#16685,#16686,#16687,#16688,#16689,#16690,#16691,#16692,#16693,#16694,#16695,#16696,#16697,#16698,#16699,#16700,#16701,#16702,#16703,#16704,#16705,#16706,#16707,#16708,#16709,#16710,#16711,#16712,#16713,#16714,#16715,#16716,#16717,#16718,#16719,#16720,#16721,#16722,#16723,#16724,#16725,#16726,#16727,#16728,#16729,#16730,#16731,#16732,#16733,#16734,#16735,#16736,#16737,#16738,#16739,#16740,#16741,#16742,#16743,#16744,#16745,#16746,#16747,#16748,#16749,#16750,#16751,#16752,#16753,#16754,#16755,#16756,#16757,#16758,#16759,#16760,#16761,#16762,#16763,#16764,#16765,#16766,#16767,#16768,#16769,#16770,#16771,#16772,#16773,#16774,#16775,#16776,#16777,#16778,#16779,#16780,#16781,#16782,#16783,#16784,#16785,#16786,#16787,#16788,#16789,#16790,#16791,#16792,#16793,#16794,#16795,#16796,#16797,#16798,#16799,#16800,#16801,#16802,#16803,#16804,#16805,#16806,#16807,#16808,#16809,#16810,#16811,#16812,#16813,#16814,#16815,#16816,#16817,#16818,#16819,#16820,#16821,#16822,#16823,#16824,#16825,#16826,#16827,#16828,#16829,#16830,#16831,#16832,#16833,#16834,#16835,#16836,#16837,#16838,#16839,#16840,#16841,#16842,#16843,#16844,#16845,#16846,#16847,#16848,#16849,#16850,#16851,#16852,#16853,#16854,#16855,#16856,#16857,#16858,#16859,#16860,#16861,#16862,#16863,#16864,#16865,#16866,#16867,#16868,#16869,#16870,#16871,#16872,#16873,#16874,#16875,#16876,#16877,#16878,#16879,#16880,#16881,#16882,#16883,#16884,#16885,#16886,#16887,#16888,#16889,#16890,#16891,#16892,#16893,#16894,#16895,#16896,#16897,#16898,#16899,#16900,#16901,#16902,#16903,#16904,#16905,#16906,#16907,#16908,#16909,#16910,#16911,#16912,#16913,#16914,#16915,#16916,#16917,#16918,#16919,#16920,#16921,#16922,#16923,#16924,#16925,#16926,#16927,#16928,#16929,#16930,#16931,#16932,#16933,#16934,#16935,#16936,#16937,#16938,#16939,#16940,#16941,#16942,#16943,#16944,#16945,#16946,#16947,#16948,#16949,#16950,#16951,#16952,#16953,#16954,#16955,#16956,#16957,#16958,#16959,#16960,#16961,#16962,#16963,#16964,#16965,#16966,#16967,#16968,#16969,#16970,#16971,#16972,#16973,#16974,#16975,#16976,#16977,#16978,#16979,#16980,#16981,#16982,#16983,#16984,#16985,#16986,#16987,#16988,#16989,#16990,#16991,#16992,#16993,#16994,#16995,#16996,#16997,#16998,#16999,#17000,#17001,#17002,#17003,#17004,#17005,#17006,#17007,#17008,#17009,#17010,#17011,#17012,#17013,#17014,#17015,#17016,#17017,#17018,#17019,#17020,#17021,#17022,#17023,#17024,#17025,#17026,#17027,#17028,#17029,#17030,#17031,#17032,#17033,#17034,#17035,#17036,#17037,#17038,#17039,#17040,#17041,#17042,#17043,#17044,#17045,#17046,#17047,#17048,#17049,#17050,#17051,#17052,#17053,#17054,#17055,#17056,#17057,#17058,#17059,#17060,#17061,#17062,#17063,#17064,#17065,#17066,#17067,#17068,#17069,#17070,#17071,#17072,#17073,#17074,#17075,#17076,#17077,#17078,#17079,#17080,#17081,#17082,#17083,#17084,#17085,#17086,#17087,#17088,#17089,#17090,#17091,#17092,#17093,#17094,#17095,#17096,#17097,#17098,#17099,#17100,#17101,#17102,#17103,#17104,#17105,#17106,#17107,#17108,#17109,#17110,#17111,#17112,#17113,#17114,#17115,#17116,#17117,#17118,#17119,#17120,#17121,#17122,#17123,#17124,#17125,#17126,#17127,#17128,#17129,#17130,#17131,#17132,#17133,#17134,#17135,#17136,#17137,#17138,#17139,#17140,#17141,#17142,#17143,#17144,#17145,#17146,#17147,#17148,#17149,#17150,#17151,#17152,#17153,#17154,#17155,#17156,#17157,#17158,#17159,#17160,#17161,#17162,#17163,#17164,#17165,#17166,#17167,#17168,#17169,#17170,#17171,#17172,#17173,#17174,#17175,#17176,#17177,#17178,#17179,#17180,#17181,#17182,#17183,#17184,#17185,#17186,#17187,#17188,#17189,#17190,#17191,#17192,#17193,#17194,#17195,#17196,#17197,#17198,#17199,#17200,#17201,#17202,#17203,#17204,#17205,#17206,#17207,#17208,#17209,#17210,#17211,#17212,#17213,#17214,#17215,#17216,#17217,#17218,#17219,#17220,#17221,#17222,#17223,#17224,#17225,#17226,#17227,#17228,#17229,#17230,#17231,#17232,#17233,#17234,#17235,#17236,#17237,#17238,#17239,#17240,#17241,#17242,#17243,#17244,#17245,#17246,#17247,#17248,#17249,#17250,#17251,#17252,#17253,#17254,#17255,#17256,#17257,#17258,#17259,#17260,#17261,#17262,#17263,#17264,#17265,#17266,#17267,#17268,#17269,#17270,#17271,#17272,#17273,#17274,#17275,#17276,#17277,#17278,#17279,#17280,#17281,#17282,#17283,#17284,#17285,#17286,#17287,#17288,#17289,#17290,#17291,#17292,#17293,#17294,#17295,#17296,#17297,#17298,#17299,#17300,#17301,#17302,#17303,#17304,#17305,#17306,#17307,#17308,#17309,#17310,#17311,#17312,#17313,#17314,#17315,#17316,#17317,#17318,#17319,#17320,#17321,#17322,#17323,#17324,#17325,#17326,#17327,#17328,#17329,#17330,#17331,#17332,#17333,#17334,#17335,#17336,#17337,#17338,#17339,#17340,#17341,#17342,#17343,#17344,#17345,#17346,#17347,#17348,#17349,#17350,#17351,#17352,#17353,#17354,#17355,#17356,#17357,#17358,#17359,#17360,#17361,#17362,#17363,#17364,#17365,#17366,#17367,#17368,#17369,#17370,#17371,#17372,#17373,#17374,#17375,#17376,#17377,#17378,#17379),#16489);+#16496=STYLED_ITEM('color',(#16497),#17);+#16497=PRESENTATION_STYLE_ASSIGNMENT((#16498,#16504));+#16498=SURFACE_STYLE_USAGE(.BOTH.,#16499);+#16499=SURFACE_SIDE_STYLE('',(#16500));+#16500=SURFACE_STYLE_FILL_AREA(#16501);+#16501=FILL_AREA_STYLE('',(#16502));+#16502=FILL_AREA_STYLE_COLOUR('',#16503);+#16503=COLOUR_RGB('',0.147999998088,0.145000001626,0.145000001626);+#16504=CURVE_STYLE('',#16505,POSITIVE_LENGTH_MEASURE(0.1),#16503);+#16505=DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#16506=STYLED_ITEM('color',(#16497),#43);+#16507=STYLED_ITEM('color',(#16497),#96);+#16508=STYLED_ITEM('color',(#16497),#109);+#16509=STYLED_ITEM('color',(#16497),#128);+#16510=STYLED_ITEM('color',(#16497),#141);+#16511=STYLED_ITEM('color',(#16497),#378);+#16512=STYLED_ITEM('color',(#16497),#615);+#16513=STYLED_ITEM('color',(#16497),#628);+#16514=STYLED_ITEM('color',(#16497),#641);+#16515=STYLED_ITEM('color',(#16497),#650);+#16516=STYLED_ITEM('color',(#16497),#665);+#16517=STYLED_ITEM('color',(#16497),#729);+#16518=STYLED_ITEM('color',(#16497),#740);+#16519=STYLED_ITEM('color',(#16520),#759);+#16520=PRESENTATION_STYLE_ASSIGNMENT((#16521,#16527));+#16521=SURFACE_STYLE_USAGE(.BOTH.,#16522);+#16522=SURFACE_SIDE_STYLE('',(#16523));+#16523=SURFACE_STYLE_FILL_AREA(#16524);+#16524=FILL_AREA_STYLE('',(#16525));+#16525=FILL_AREA_STYLE_COLOUR('',#16526);+#16526=COLOUR_RGB('',0.823999987314,0.819999987296,0.781000009244);+#16527=CURVE_STYLE('',#16505,POSITIVE_LENGTH_MEASURE(0.1),#16526);+#16528=STYLED_ITEM('color',(#16497),#784);+#16529=STYLED_ITEM('color',(#16520),#802);+#16530=STYLED_ITEM('color',(#16497),#823);+#16531=STYLED_ITEM('color',(#16520),#841);+#16532=STYLED_ITEM('color',(#16497),#862);+#16533=STYLED_ITEM('color',(#16520),#880);+#16534=STYLED_ITEM('color',(#16497),#901);+#16535=STYLED_ITEM('color',(#16520),#919);+#16536=STYLED_ITEM('color',(#16497),#940);+#16537=STYLED_ITEM('color',(#16520),#958);+#16538=STYLED_ITEM('color',(#16497),#979);+#16539=STYLED_ITEM('color',(#16520),#997);+#16540=STYLED_ITEM('color',(#16497),#1018);+#16541=STYLED_ITEM('color',(#16520),#1036);+#16542=STYLED_ITEM('color',(#16497),#1057);+#16543=STYLED_ITEM('color',(#16520),#1075);+#16544=STYLED_ITEM('color',(#16497),#1096);+#16545=STYLED_ITEM('color',(#16520),#1114);+#16546=STYLED_ITEM('color',(#16497),#1135);+#16547=STYLED_ITEM('color',(#16520),#1153);+#16548=STYLED_ITEM('color',(#16497),#1174);+#16549=STYLED_ITEM('color',(#16520),#1192);+#16550=STYLED_ITEM('color',(#16497),#1213);+#16551=STYLED_ITEM('color',(#16520),#1231);+#16552=STYLED_ITEM('color',(#16497),#1252);+#16553=STYLED_ITEM('color',(#16520),#1270);+#16554=STYLED_ITEM('color',(#16497),#1291);+#16555=STYLED_ITEM('color',(#16520),#1309);+#16556=STYLED_ITEM('color',(#16497),#1330);+#16557=STYLED_ITEM('color',(#16520),#1348);+#16558=STYLED_ITEM('color',(#16497),#1369);+#16559=STYLED_ITEM('color',(#16520),#1387);+#16560=STYLED_ITEM('color',(#16497),#1408);+#16561=STYLED_ITEM('color',(#16520),#1426);+#16562=STYLED_ITEM('color',(#16497),#1447);+#16563=STYLED_ITEM('color',(#16520),#1465);+#16564=STYLED_ITEM('color',(#16497),#1486);+#16565=STYLED_ITEM('color',(#16520),#1504);+#16566=STYLED_ITEM('color',(#16497),#1525);+#16567=STYLED_ITEM('color',(#16520),#1543);+#16568=STYLED_ITEM('color',(#16497),#1564);+#16569=STYLED_ITEM('color',(#16520),#1582);+#16570=STYLED_ITEM('color',(#16497),#1603);+#16571=STYLED_ITEM('color',(#16520),#1621);+#16572=STYLED_ITEM('color',(#16497),#1642);+#16573=STYLED_ITEM('color',(#16520),#1660);+#16574=STYLED_ITEM('color',(#16497),#1681);+#16575=STYLED_ITEM('color',(#16520),#1699);+#16576=STYLED_ITEM('color',(#16497),#1720);+#16577=STYLED_ITEM('color',(#16520),#1738);+#16578=STYLED_ITEM('color',(#16497),#1759);+#16579=STYLED_ITEM('color',(#16520),#1777);+#16580=STYLED_ITEM('color',(#16497),#1798);+#16581=STYLED_ITEM('color',(#16520),#1816);+#16582=STYLED_ITEM('color',(#16497),#1837);+#16583=STYLED_ITEM('color',(#16497),#1847);+#16584=STYLED_ITEM('color',(#16520),#1859);+#16585=STYLED_ITEM('color',(#16497),#1880);+#16586=STYLED_ITEM('color',(#16520),#1898);+#16587=STYLED_ITEM('color',(#16497),#1919);+#16588=STYLED_ITEM('color',(#16520),#1937);+#16589=STYLED_ITEM('color',(#16497),#1958);+#16590=STYLED_ITEM('color',(#16520),#1976);+#16591=STYLED_ITEM('color',(#16497),#1997);+#16592=STYLED_ITEM('color',(#16520),#2015);+#16593=STYLED_ITEM('color',(#16497),#2036);+#16594=STYLED_ITEM('color',(#16520),#2054);+#16595=STYLED_ITEM('color',(#16497),#2075);+#16596=STYLED_ITEM('color',(#16520),#2093);+#16597=STYLED_ITEM('color',(#16497),#2114);+#16598=STYLED_ITEM('color',(#16520),#2132);+#16599=STYLED_ITEM('color',(#16497),#2153);+#16600=STYLED_ITEM('color',(#16520),#2171);+#16601=STYLED_ITEM('color',(#16497),#2192);+#16602=STYLED_ITEM('color',(#16520),#2210);+#16603=STYLED_ITEM('color',(#16497),#2231);+#16604=STYLED_ITEM('color',(#16520),#2249);+#16605=STYLED_ITEM('color',(#16497),#2270);+#16606=STYLED_ITEM('color',(#16520),#2288);+#16607=STYLED_ITEM('color',(#16497),#2309);+#16608=STYLED_ITEM('color',(#16520),#2327);+#16609=STYLED_ITEM('color',(#16497),#2348);+#16610=STYLED_ITEM('color',(#16520),#2366);+#16611=STYLED_ITEM('color',(#16497),#2387);+#16612=STYLED_ITEM('color',(#16520),#2405);+#16613=STYLED_ITEM('color',(#16497),#2426);+#16614=STYLED_ITEM('color',(#16520),#2444);+#16615=STYLED_ITEM('color',(#16497),#2465);+#16616=STYLED_ITEM('color',(#16520),#2483);+#16617=STYLED_ITEM('color',(#16497),#2504);+#16618=STYLED_ITEM('color',(#16520),#2522);+#16619=STYLED_ITEM('color',(#16497),#2543);+#16620=STYLED_ITEM('color',(#16520),#2561);+#16621=STYLED_ITEM('color',(#16497),#2582);+#16622=STYLED_ITEM('color',(#16520),#2600);+#16623=STYLED_ITEM('color',(#16497),#2621);+#16624=STYLED_ITEM('color',(#16520),#2639);+#16625=STYLED_ITEM('color',(#16497),#2660);+#16626=STYLED_ITEM('color',(#16520),#2678);+#16627=STYLED_ITEM('color',(#16497),#2699);+#16628=STYLED_ITEM('color',(#16520),#2717);+#16629=STYLED_ITEM('color',(#16497),#2738);+#16630=STYLED_ITEM('color',(#16520),#2756);+#16631=STYLED_ITEM('color',(#16497),#2777);+#16632=STYLED_ITEM('color',(#16520),#2795);+#16633=STYLED_ITEM('color',(#16497),#2816);+#16634=STYLED_ITEM('color',(#16520),#2834);+#16635=STYLED_ITEM('color',(#16497),#2855);+#16636=STYLED_ITEM('color',(#16520),#2873);+#16637=STYLED_ITEM('color',(#16497),#2894);+#16638=STYLED_ITEM('color',(#16520),#2912);+#16639=STYLED_ITEM('color',(#16497),#2933);+#16640=STYLED_ITEM('color',(#16497),#2950);+#16641=STYLED_ITEM('color',(#16497),#2965);+#16642=STYLED_ITEM('color',(#16497),#2980);+#16643=STYLED_ITEM('color',(#16520),#2991);+#16644=STYLED_ITEM('color',(#16497),#3015);+#16645=STYLED_ITEM('color',(#16497),#3253);+#16646=STYLED_ITEM('color',(#16497),#3267);+#16647=STYLED_ITEM('color',(#16497),#3281);+#16648=STYLED_ITEM('color',(#16497),#3295);+#16649=STYLED_ITEM('color',(#16520),#3533);+#16650=STYLED_ITEM('color',(#16497),#3553);+#16651=STYLED_ITEM('color',(#16520),#3584);+#16652=STYLED_ITEM('color',(#16520),#3656);+#16653=STYLED_ITEM('color',(#16520),#3674);+#16654=STYLED_ITEM('color',(#16497),#3727);+#16655=STYLED_ITEM('color',(#16520),#3738);+#16656=STYLED_ITEM('color',(#16520),#3798);+#16657=STYLED_ITEM('color',(#16520),#3815);+#16658=STYLED_ITEM('color',(#16497),#3868);+#16659=STYLED_ITEM('color',(#16520),#3879);+#16660=STYLED_ITEM('color',(#16520),#3939);+#16661=STYLED_ITEM('color',(#16520),#3956);+#16662=STYLED_ITEM('color',(#16497),#4009);+#16663=STYLED_ITEM('color',(#16520),#4020);+#16664=STYLED_ITEM('color',(#16520),#4080);+#16665=STYLED_ITEM('color',(#16520),#4097);+#16666=STYLED_ITEM('color',(#16497),#4150);+#16667=STYLED_ITEM('color',(#16520),#4161);+#16668=STYLED_ITEM('color',(#16520),#4221);+#16669=STYLED_ITEM('color',(#16520),#4238);+#16670=STYLED_ITEM('color',(#16497),#4291);+#16671=STYLED_ITEM('color',(#16520),#4302);+#16672=STYLED_ITEM('color',(#16520),#4362);+#16673=STYLED_ITEM('color',(#16520),#4379);+#16674=STYLED_ITEM('color',(#16497),#4432);+#16675=STYLED_ITEM('color',(#16520),#4443);+#16676=STYLED_ITEM('color',(#16520),#4503);+#16677=STYLED_ITEM('color',(#16520),#4520);+#16678=STYLED_ITEM('color',(#16497),#4573);+#16679=STYLED_ITEM('color',(#16520),#4584);+#16680=STYLED_ITEM('color',(#16520),#4644);+#16681=STYLED_ITEM('color',(#16520),#4661);+#16682=STYLED_ITEM('color',(#16497),#4714);+#16683=STYLED_ITEM('color',(#16520),#4725);+#16684=STYLED_ITEM('color',(#16520),#4785);+#16685=STYLED_ITEM('color',(#16520),#4802);+#16686=STYLED_ITEM('color',(#16497),#4855);+#16687=STYLED_ITEM('color',(#16520),#4866);+#16688=STYLED_ITEM('color',(#16520),#4926);+#16689=STYLED_ITEM('color',(#16520),#4943);+#16690=STYLED_ITEM('color',(#16497),#4996);+#16691=STYLED_ITEM('color',(#16520),#5007);+#16692=STYLED_ITEM('color',(#16520),#5067);+#16693=STYLED_ITEM('color',(#16520),#5084);+#16694=STYLED_ITEM('color',(#16497),#5137);+#16695=STYLED_ITEM('color',(#16520),#5148);+#16696=STYLED_ITEM('color',(#16520),#5208);+#16697=STYLED_ITEM('color',(#16520),#5225);+#16698=STYLED_ITEM('color',(#16497),#5278);+#16699=STYLED_ITEM('color',(#16520),#5289);+#16700=STYLED_ITEM('color',(#16520),#5349);+#16701=STYLED_ITEM('color',(#16520),#5366);+#16702=STYLED_ITEM('color',(#16497),#5419);+#16703=STYLED_ITEM('color',(#16520),#5430);+#16704=STYLED_ITEM('color',(#16520),#5490);+#16705=STYLED_ITEM('color',(#16520),#5507);+#16706=STYLED_ITEM('color',(#16497),#5560);+#16707=STYLED_ITEM('color',(#16520),#5571);+#16708=STYLED_ITEM('color',(#16520),#5631);+#16709=STYLED_ITEM('color',(#16520),#5648);+#16710=STYLED_ITEM('color',(#16497),#5701);+#16711=STYLED_ITEM('color',(#16520),#5712);+#16712=STYLED_ITEM('color',(#16520),#5772);+#16713=STYLED_ITEM('color',(#16520),#5789);+#16714=STYLED_ITEM('color',(#16497),#5842);+#16715=STYLED_ITEM('color',(#16520),#5853);+#16716=STYLED_ITEM('color',(#16520),#5913);+#16717=STYLED_ITEM('color',(#16520),#5930);+#16718=STYLED_ITEM('color',(#16497),#5983);+#16719=STYLED_ITEM('color',(#16520),#5994);+#16720=STYLED_ITEM('color',(#16520),#6054);+#16721=STYLED_ITEM('color',(#16520),#6071);+#16722=STYLED_ITEM('color',(#16497),#6124);+#16723=STYLED_ITEM('color',(#16520),#6135);+#16724=STYLED_ITEM('color',(#16520),#6195);+#16725=STYLED_ITEM('color',(#16520),#6212);+#16726=STYLED_ITEM('color',(#16497),#6265);+#16727=STYLED_ITEM('color',(#16520),#6276);+#16728=STYLED_ITEM('color',(#16520),#6336);+#16729=STYLED_ITEM('color',(#16520),#6353);+#16730=STYLED_ITEM('color',(#16497),#6406);+#16731=STYLED_ITEM('color',(#16520),#6417);+#16732=STYLED_ITEM('color',(#16520),#6477);+#16733=STYLED_ITEM('color',(#16520),#6494);+#16734=STYLED_ITEM('color',(#16497),#6547);+#16735=STYLED_ITEM('color',(#16520),#6558);+#16736=STYLED_ITEM('color',(#16520),#6618);+#16737=STYLED_ITEM('color',(#16520),#6635);+#16738=STYLED_ITEM('color',(#16497),#6688);+#16739=STYLED_ITEM('color',(#16520),#6699);+#16740=STYLED_ITEM('color',(#16520),#6759);+#16741=STYLED_ITEM('color',(#16520),#6776);+#16742=STYLED_ITEM('color',(#16497),#6829);+#16743=STYLED_ITEM('color',(#16520),#6840);+#16744=STYLED_ITEM('color',(#16520),#6900);+#16745=STYLED_ITEM('color',(#16520),#6917);+#16746=STYLED_ITEM('color',(#16497),#6970);+#16747=STYLED_ITEM('color',(#16520),#6981);+#16748=STYLED_ITEM('color',(#16520),#7041);+#16749=STYLED_ITEM('color',(#16520),#7058);+#16750=STYLED_ITEM('color',(#16497),#7111);+#16751=STYLED_ITEM('color',(#16520),#7122);+#16752=STYLED_ITEM('color',(#16520),#7182);+#16753=STYLED_ITEM('color',(#16520),#7199);+#16754=STYLED_ITEM('color',(#16497),#7252);+#16755=STYLED_ITEM('color',(#16520),#7263);+#16756=STYLED_ITEM('color',(#16520),#7323);+#16757=STYLED_ITEM('color',(#16520),#7340);+#16758=STYLED_ITEM('color',(#16497),#7393);+#16759=STYLED_ITEM('color',(#16520),#7401);+#16760=STYLED_ITEM('color',(#16520),#7459);+#16761=STYLED_ITEM('color',(#16520),#7476);+#16762=STYLED_ITEM('color',(#16520),#7524);+#16763=STYLED_ITEM('color',(#16520),#7590);+#16764=STYLED_ITEM('color',(#16520),#7606);+#16765=STYLED_ITEM('color',(#16497),#7654);+#16766=STYLED_ITEM('color',(#16520),#7664);+#16767=STYLED_ITEM('color',(#16520),#7724);+#16768=STYLED_ITEM('color',(#16520),#7740);+#16769=STYLED_ITEM('color',(#16497),#7793);+#16770=STYLED_ITEM('color',(#16520),#7804);+#16771=STYLED_ITEM('color',(#16520),#7864);+#16772=STYLED_ITEM('color',(#16520),#7880);+#16773=STYLED_ITEM('color',(#16497),#7933);+#16774=STYLED_ITEM('color',(#16520),#7944);+#16775=STYLED_ITEM('color',(#16520),#8004);+#16776=STYLED_ITEM('color',(#16520),#8020);+#16777=STYLED_ITEM('color',(#16497),#8073);+#16778=STYLED_ITEM('color',(#16520),#8084);+#16779=STYLED_ITEM('color',(#16520),#8144);+#16780=STYLED_ITEM('color',(#16520),#8160);+#16781=STYLED_ITEM('color',(#16497),#8213);+#16782=STYLED_ITEM('color',(#16520),#8224);+#16783=STYLED_ITEM('color',(#16520),#8284);+#16784=STYLED_ITEM('color',(#16520),#8300);+#16785=STYLED_ITEM('color',(#16497),#8353);+#16786=STYLED_ITEM('color',(#16520),#8364);+#16787=STYLED_ITEM('color',(#16520),#8424);+#16788=STYLED_ITEM('color',(#16520),#8440);+#16789=STYLED_ITEM('color',(#16497),#8493);+#16790=STYLED_ITEM('color',(#16520),#8504);+#16791=STYLED_ITEM('color',(#16520),#8564);+#16792=STYLED_ITEM('color',(#16520),#8580);+#16793=STYLED_ITEM('color',(#16497),#8633);+#16794=STYLED_ITEM('color',(#16520),#8644);+#16795=STYLED_ITEM('color',(#16520),#8704);+#16796=STYLED_ITEM('color',(#16520),#8720);+#16797=STYLED_ITEM('color',(#16497),#8773);+#16798=STYLED_ITEM('color',(#16520),#8784);+#16799=STYLED_ITEM('color',(#16520),#8844);+#16800=STYLED_ITEM('color',(#16520),#8860);+#16801=STYLED_ITEM('color',(#16497),#8913);+#16802=STYLED_ITEM('color',(#16520),#8924);+#16803=STYLED_ITEM('color',(#16520),#8984);+#16804=STYLED_ITEM('color',(#16520),#9000);+#16805=STYLED_ITEM('color',(#16497),#9053);+#16806=STYLED_ITEM('color',(#16520),#9064);+#16807=STYLED_ITEM('color',(#16520),#9124);+#16808=STYLED_ITEM('color',(#16520),#9140);+#16809=STYLED_ITEM('color',(#16497),#9193);+#16810=STYLED_ITEM('color',(#16520),#9204);+#16811=STYLED_ITEM('color',(#16520),#9264);+#16812=STYLED_ITEM('color',(#16520),#9280);+#16813=STYLED_ITEM('color',(#16497),#9333);+#16814=STYLED_ITEM('color',(#16520),#9344);+#16815=STYLED_ITEM('color',(#16520),#9404);+#16816=STYLED_ITEM('color',(#16520),#9420);+#16817=STYLED_ITEM('color',(#16497),#9473);+#16818=STYLED_ITEM('color',(#16520),#9484);+#16819=STYLED_ITEM('color',(#16520),#9544);+#16820=STYLED_ITEM('color',(#16520),#9560);+#16821=STYLED_ITEM('color',(#16497),#9613);+#16822=STYLED_ITEM('color',(#16520),#9624);+#16823=STYLED_ITEM('color',(#16520),#9684);+#16824=STYLED_ITEM('color',(#16520),#9700);+#16825=STYLED_ITEM('color',(#16497),#9753);+#16826=STYLED_ITEM('color',(#16520),#9764);+#16827=STYLED_ITEM('color',(#16520),#9824);+#16828=STYLED_ITEM('color',(#16520),#9840);+#16829=STYLED_ITEM('color',(#16497),#9893);+#16830=STYLED_ITEM('color',(#16520),#9904);+#16831=STYLED_ITEM('color',(#16520),#9964);+#16832=STYLED_ITEM('color',(#16520),#9980);+#16833=STYLED_ITEM('color',(#16497),#10033);+#16834=STYLED_ITEM('color',(#16520),#10044);+#16835=STYLED_ITEM('color',(#16520),#10104);+#16836=STYLED_ITEM('color',(#16520),#10120);+#16837=STYLED_ITEM('color',(#16497),#10173);+#16838=STYLED_ITEM('color',(#16520),#10184);+#16839=STYLED_ITEM('color',(#16520),#10244);+#16840=STYLED_ITEM('color',(#16520),#10260);+#16841=STYLED_ITEM('color',(#16497),#10313);+#16842=STYLED_ITEM('color',(#16520),#10324);+#16843=STYLED_ITEM('color',(#16520),#10384);+#16844=STYLED_ITEM('color',(#16520),#10400);+#16845=STYLED_ITEM('color',(#16497),#10453);+#16846=STYLED_ITEM('color',(#16520),#10464);+#16847=STYLED_ITEM('color',(#16520),#10524);+#16848=STYLED_ITEM('color',(#16520),#10540);+#16849=STYLED_ITEM('color',(#16497),#10593);+#16850=STYLED_ITEM('color',(#16520),#10604);+#16851=STYLED_ITEM('color',(#16520),#10664);+#16852=STYLED_ITEM('color',(#16520),#10680);+#16853=STYLED_ITEM('color',(#16497),#10733);+#16854=STYLED_ITEM('color',(#16520),#10744);+#16855=STYLED_ITEM('color',(#16520),#10804);+#16856=STYLED_ITEM('color',(#16520),#10820);+#16857=STYLED_ITEM('color',(#16497),#10873);+#16858=STYLED_ITEM('color',(#16520),#10884);+#16859=STYLED_ITEM('color',(#16520),#10944);+#16860=STYLED_ITEM('color',(#16520),#10960);+#16861=STYLED_ITEM('color',(#16497),#11013);+#16862=STYLED_ITEM('color',(#16520),#11024);+#16863=STYLED_ITEM('color',(#16520),#11084);+#16864=STYLED_ITEM('color',(#16520),#11100);+#16865=STYLED_ITEM('color',(#16497),#11153);+#16866=STYLED_ITEM('color',(#16520),#11164);+#16867=STYLED_ITEM('color',(#16520),#11224);+#16868=STYLED_ITEM('color',(#16520),#11240);+#16869=STYLED_ITEM('color',(#16497),#11293);+#16870=STYLED_ITEM('color',(#16520),#11304);+#16871=STYLED_ITEM('color',(#16520),#11364);+#16872=STYLED_ITEM('color',(#16520),#11380);+#16873=STYLED_ITEM('color',(#16520),#11431);+#16874=STYLED_ITEM('color',(#16520),#11441);+#16875=STYLED_ITEM('color',(#16520),#11453);+#16876=STYLED_ITEM('color',(#16520),#11465);+#16877=STYLED_ITEM('color',(#16520),#11477);+#16878=STYLED_ITEM('color',(#16520),#11489);+#16879=STYLED_ITEM('color',(#16520),#11501);+#16880=STYLED_ITEM('color',(#16520),#11513);+#16881=STYLED_ITEM('color',(#16520),#11525);+#16882=STYLED_ITEM('color',(#16520),#11537);+#16883=STYLED_ITEM('color',(#16520),#11549);+#16884=STYLED_ITEM('color',(#16520),#11561);+#16885=STYLED_ITEM('color',(#16520),#11573);+#16886=STYLED_ITEM('color',(#16520),#11585);+#16887=STYLED_ITEM('color',(#16520),#11597);+#16888=STYLED_ITEM('color',(#16520),#11609);+#16889=STYLED_ITEM('color',(#16520),#11621);+#16890=STYLED_ITEM('color',(#16520),#11633);+#16891=STYLED_ITEM('color',(#16520),#11645);+#16892=STYLED_ITEM('color',(#16520),#11657);+#16893=STYLED_ITEM('color',(#16520),#11669);+#16894=STYLED_ITEM('color',(#16520),#11681);+#16895=STYLED_ITEM('color',(#16520),#11693);+#16896=STYLED_ITEM('color',(#16520),#11705);+#16897=STYLED_ITEM('color',(#16520),#11717);+#16898=STYLED_ITEM('color',(#16520),#11729);+#16899=STYLED_ITEM('color',(#16520),#11741);+#16900=STYLED_ITEM('color',(#16520),#11753);+#16901=STYLED_ITEM('color',(#16497),#11765);+#16902=STYLED_ITEM('color',(#16497),#11799);+#16903=STYLED_ITEM('color',(#16520),#11809);+#16904=STYLED_ITEM('color',(#16520),#11821);+#16905=STYLED_ITEM('color',(#16520),#11833);+#16906=STYLED_ITEM('color',(#16520),#11845);+#16907=STYLED_ITEM('color',(#16520),#11857);+#16908=STYLED_ITEM('color',(#16520),#11869);+#16909=STYLED_ITEM('color',(#16520),#11881);+#16910=STYLED_ITEM('color',(#16520),#11893);+#16911=STYLED_ITEM('color',(#16520),#11905);+#16912=STYLED_ITEM('color',(#16520),#11917);+#16913=STYLED_ITEM('color',(#16520),#11929);+#16914=STYLED_ITEM('color',(#16520),#11941);+#16915=STYLED_ITEM('color',(#16520),#11953);+#16916=STYLED_ITEM('color',(#16520),#11965);+#16917=STYLED_ITEM('color',(#16520),#11977);+#16918=STYLED_ITEM('color',(#16520),#11989);+#16919=STYLED_ITEM('color',(#16520),#12001);+#16920=STYLED_ITEM('color',(#16520),#12013);+#16921=STYLED_ITEM('color',(#16520),#12025);+#16922=STYLED_ITEM('color',(#16520),#12037);+#16923=STYLED_ITEM('color',(#16520),#12049);+#16924=STYLED_ITEM('color',(#16520),#12061);+#16925=STYLED_ITEM('color',(#16520),#12073);+#16926=STYLED_ITEM('color',(#16520),#12085);+#16927=STYLED_ITEM('color',(#16520),#12097);+#16928=STYLED_ITEM('color',(#16520),#12109);+#16929=STYLED_ITEM('color',(#16520),#12121);+#16930=STYLED_ITEM('color',(#16497),#12133);+#16931=STYLED_ITEM('color',(#16520),#12143);+#16932=STYLED_ITEM('color',(#16497),#12153);+#16933=STYLED_ITEM('color',(#16520),#12161);+#16934=STYLED_ITEM('color',(#16520),#12171);+#16935=STYLED_ITEM('color',(#16520),#12182);+#16936=STYLED_ITEM('color',(#16520),#12192);+#16937=STYLED_ITEM('color',(#16520),#12202);+#16938=STYLED_ITEM('color',(#16520),#12212);+#16939=STYLED_ITEM('color',(#16520),#12222);+#16940=STYLED_ITEM('color',(#16520),#12232);+#16941=STYLED_ITEM('color',(#16520),#12241);+#16942=STYLED_ITEM('color',(#16520),#12251);+#16943=STYLED_ITEM('color',(#16520),#12261);+#16944=STYLED_ITEM('color',(#16520),#12271);+#16945=STYLED_ITEM('color',(#16520),#12281);+#16946=STYLED_ITEM('color',(#16520),#12291);+#16947=STYLED_ITEM('color',(#16520),#12301);+#16948=STYLED_ITEM('color',(#16520),#12311);+#16949=STYLED_ITEM('color',(#16520),#12319);+#16950=STYLED_ITEM('color',(#16520),#12329);+#16951=STYLED_ITEM('color',(#16520),#12339);+#16952=STYLED_ITEM('color',(#16520),#12349);+#16953=STYLED_ITEM('color',(#16520),#12359);+#16954=STYLED_ITEM('color',(#16520),#12369);+#16955=STYLED_ITEM('color',(#16520),#12379);+#16956=STYLED_ITEM('color',(#16520),#12389);+#16957=STYLED_ITEM('color',(#16520),#12397);+#16958=STYLED_ITEM('color',(#16520),#12407);+#16959=STYLED_ITEM('color',(#16520),#12417);+#16960=STYLED_ITEM('color',(#16520),#12427);+#16961=STYLED_ITEM('color',(#16520),#12437);+#16962=STYLED_ITEM('color',(#16520),#12447);+#16963=STYLED_ITEM('color',(#16520),#12457);+#16964=STYLED_ITEM('color',(#16520),#12467);+#16965=STYLED_ITEM('color',(#16520),#12475);+#16966=STYLED_ITEM('color',(#16520),#12485);+#16967=STYLED_ITEM('color',(#16520),#12495);+#16968=STYLED_ITEM('color',(#16520),#12505);+#16969=STYLED_ITEM('color',(#16520),#12515);+#16970=STYLED_ITEM('color',(#16520),#12525);+#16971=STYLED_ITEM('color',(#16520),#12535);+#16972=STYLED_ITEM('color',(#16520),#12545);+#16973=STYLED_ITEM('color',(#16520),#12553);+#16974=STYLED_ITEM('color',(#16520),#12563);+#16975=STYLED_ITEM('color',(#16520),#12573);+#16976=STYLED_ITEM('color',(#16520),#12583);+#16977=STYLED_ITEM('color',(#16520),#12593);+#16978=STYLED_ITEM('color',(#16520),#12603);+#16979=STYLED_ITEM('color',(#16520),#12613);+#16980=STYLED_ITEM('color',(#16520),#12623);+#16981=STYLED_ITEM('color',(#16520),#12631);+#16982=STYLED_ITEM('color',(#16520),#12641);+#16983=STYLED_ITEM('color',(#16520),#12651);+#16984=STYLED_ITEM('color',(#16520),#12661);+#16985=STYLED_ITEM('color',(#16520),#12671);+#16986=STYLED_ITEM('color',(#16520),#12681);+#16987=STYLED_ITEM('color',(#16520),#12691);+#16988=STYLED_ITEM('color',(#16520),#12701);+#16989=STYLED_ITEM('color',(#16520),#12709);+#16990=STYLED_ITEM('color',(#16520),#12719);+#16991=STYLED_ITEM('color',(#16520),#12729);+#16992=STYLED_ITEM('color',(#16520),#12739);+#16993=STYLED_ITEM('color',(#16520),#12749);+#16994=STYLED_ITEM('color',(#16520),#12759);+#16995=STYLED_ITEM('color',(#16520),#12769);+#16996=STYLED_ITEM('color',(#16520),#12779);+#16997=STYLED_ITEM('color',(#16520),#12787);+#16998=STYLED_ITEM('color',(#16520),#12797);+#16999=STYLED_ITEM('color',(#16520),#12807);+#17000=STYLED_ITEM('color',(#16520),#12817);+#17001=STYLED_ITEM('color',(#16520),#12827);+#17002=STYLED_ITEM('color',(#16520),#12837);+#17003=STYLED_ITEM('color',(#16520),#12847);+#17004=STYLED_ITEM('color',(#16520),#12857);+#17005=STYLED_ITEM('color',(#16520),#12865);+#17006=STYLED_ITEM('color',(#16520),#12875);+#17007=STYLED_ITEM('color',(#16520),#12885);+#17008=STYLED_ITEM('color',(#16520),#12895);+#17009=STYLED_ITEM('color',(#16520),#12905);+#17010=STYLED_ITEM('color',(#16520),#12915);+#17011=STYLED_ITEM('color',(#16520),#12925);+#17012=STYLED_ITEM('color',(#16520),#12935);+#17013=STYLED_ITEM('color',(#16520),#12943);+#17014=STYLED_ITEM('color',(#16520),#12953);+#17015=STYLED_ITEM('color',(#16520),#12963);+#17016=STYLED_ITEM('color',(#16520),#12973);+#17017=STYLED_ITEM('color',(#16520),#12983);+#17018=STYLED_ITEM('color',(#16520),#12993);+#17019=STYLED_ITEM('color',(#16520),#13003);+#17020=STYLED_ITEM('color',(#16520),#13013);+#17021=STYLED_ITEM('color',(#16520),#13021);+#17022=STYLED_ITEM('color',(#16520),#13031);+#17023=STYLED_ITEM('color',(#16520),#13041);+#17024=STYLED_ITEM('color',(#16520),#13051);+#17025=STYLED_ITEM('color',(#16520),#13061);+#17026=STYLED_ITEM('color',(#16520),#13071);+#17027=STYLED_ITEM('color',(#16520),#13081);+#17028=STYLED_ITEM('color',(#16520),#13091);+#17029=STYLED_ITEM('color',(#16520),#13099);+#17030=STYLED_ITEM('color',(#16520),#13109);+#17031=STYLED_ITEM('color',(#16520),#13119);+#17032=STYLED_ITEM('color',(#16520),#13129);+#17033=STYLED_ITEM('color',(#16520),#13139);+#17034=STYLED_ITEM('color',(#16520),#13149);+#17035=STYLED_ITEM('color',(#16520),#13159);+#17036=STYLED_ITEM('color',(#16520),#13169);+#17037=STYLED_ITEM('color',(#16520),#13177);+#17038=STYLED_ITEM('color',(#16520),#13187);+#17039=STYLED_ITEM('color',(#16520),#13197);+#17040=STYLED_ITEM('color',(#16520),#13207);+#17041=STYLED_ITEM('color',(#16520),#13217);+#17042=STYLED_ITEM('color',(#16520),#13227);+#17043=STYLED_ITEM('color',(#16520),#13237);+#17044=STYLED_ITEM('color',(#16520),#13247);+#17045=STYLED_ITEM('color',(#16520),#13255);+#17046=STYLED_ITEM('color',(#16520),#13265);+#17047=STYLED_ITEM('color',(#16520),#13275);+#17048=STYLED_ITEM('color',(#16520),#13285);+#17049=STYLED_ITEM('color',(#16520),#13295);+#17050=STYLED_ITEM('color',(#16520),#13305);+#17051=STYLED_ITEM('color',(#16520),#13315);+#17052=STYLED_ITEM('color',(#16520),#13325);+#17053=STYLED_ITEM('color',(#16520),#13333);+#17054=STYLED_ITEM('color',(#16520),#13343);+#17055=STYLED_ITEM('color',(#16520),#13353);+#17056=STYLED_ITEM('color',(#16520),#13363);+#17057=STYLED_ITEM('color',(#16520),#13373);+#17058=STYLED_ITEM('color',(#16520),#13383);+#17059=STYLED_ITEM('color',(#16520),#13393);+#17060=STYLED_ITEM('color',(#16520),#13403);+#17061=STYLED_ITEM('color',(#16520),#13411);+#17062=STYLED_ITEM('color',(#16520),#13421);+#17063=STYLED_ITEM('color',(#16520),#13431);+#17064=STYLED_ITEM('color',(#16520),#13441);+#17065=STYLED_ITEM('color',(#16520),#13451);+#17066=STYLED_ITEM('color',(#16520),#13461);+#17067=STYLED_ITEM('color',(#16520),#13471);+#17068=STYLED_ITEM('color',(#16520),#13481);+#17069=STYLED_ITEM('color',(#16520),#13489);+#17070=STYLED_ITEM('color',(#16520),#13499);+#17071=STYLED_ITEM('color',(#16520),#13509);+#17072=STYLED_ITEM('color',(#16520),#13519);+#17073=STYLED_ITEM('color',(#16520),#13529);+#17074=STYLED_ITEM('color',(#16520),#13539);+#17075=STYLED_ITEM('color',(#16520),#13549);+#17076=STYLED_ITEM('color',(#16520),#13559);+#17077=STYLED_ITEM('color',(#16520),#13567);+#17078=STYLED_ITEM('color',(#16520),#13577);+#17079=STYLED_ITEM('color',(#16520),#13587);+#17080=STYLED_ITEM('color',(#16520),#13597);+#17081=STYLED_ITEM('color',(#16520),#13607);+#17082=STYLED_ITEM('color',(#16520),#13617);+#17083=STYLED_ITEM('color',(#16520),#13627);+#17084=STYLED_ITEM('color',(#16520),#13637);+#17085=STYLED_ITEM('color',(#16520),#13645);+#17086=STYLED_ITEM('color',(#16520),#13655);+#17087=STYLED_ITEM('color',(#16520),#13665);+#17088=STYLED_ITEM('color',(#16520),#13675);+#17089=STYLED_ITEM('color',(#16520),#13685);+#17090=STYLED_ITEM('color',(#16520),#13695);+#17091=STYLED_ITEM('color',(#16520),#13705);+#17092=STYLED_ITEM('color',(#16520),#13715);+#17093=STYLED_ITEM('color',(#16520),#13723);+#17094=STYLED_ITEM('color',(#16520),#13733);+#17095=STYLED_ITEM('color',(#16520),#13743);+#17096=STYLED_ITEM('color',(#16520),#13753);+#17097=STYLED_ITEM('color',(#16520),#13763);+#17098=STYLED_ITEM('color',(#16520),#13773);+#17099=STYLED_ITEM('color',(#16520),#13783);+#17100=STYLED_ITEM('color',(#16520),#13793);+#17101=STYLED_ITEM('color',(#16520),#13801);+#17102=STYLED_ITEM('color',(#16520),#13811);+#17103=STYLED_ITEM('color',(#16520),#13821);+#17104=STYLED_ITEM('color',(#16520),#13831);+#17105=STYLED_ITEM('color',(#16520),#13841);+#17106=STYLED_ITEM('color',(#16520),#13851);+#17107=STYLED_ITEM('color',(#16520),#13861);+#17108=STYLED_ITEM('color',(#16520),#13871);+#17109=STYLED_ITEM('color',(#16520),#13879);+#17110=STYLED_ITEM('color',(#16520),#13889);+#17111=STYLED_ITEM('color',(#16520),#13899);+#17112=STYLED_ITEM('color',(#16520),#13909);+#17113=STYLED_ITEM('color',(#16520),#13919);+#17114=STYLED_ITEM('color',(#16520),#13929);+#17115=STYLED_ITEM('color',(#16520),#13939);+#17116=STYLED_ITEM('color',(#16520),#13949);+#17117=STYLED_ITEM('color',(#16520),#13957);+#17118=STYLED_ITEM('color',(#16520),#13967);+#17119=STYLED_ITEM('color',(#16520),#13977);+#17120=STYLED_ITEM('color',(#16520),#13987);+#17121=STYLED_ITEM('color',(#16520),#13997);+#17122=STYLED_ITEM('color',(#16520),#14007);+#17123=STYLED_ITEM('color',(#16520),#14017);+#17124=STYLED_ITEM('color',(#16520),#14027);+#17125=STYLED_ITEM('color',(#16520),#14035);+#17126=STYLED_ITEM('color',(#16520),#14045);+#17127=STYLED_ITEM('color',(#16520),#14055);+#17128=STYLED_ITEM('color',(#16520),#14065);+#17129=STYLED_ITEM('color',(#16520),#14075);+#17130=STYLED_ITEM('color',(#16520),#14085);+#17131=STYLED_ITEM('color',(#16520),#14095);+#17132=STYLED_ITEM('color',(#16520),#14105);+#17133=STYLED_ITEM('color',(#16520),#14113);+#17134=STYLED_ITEM('color',(#16520),#14123);+#17135=STYLED_ITEM('color',(#16520),#14133);+#17136=STYLED_ITEM('color',(#16520),#14143);+#17137=STYLED_ITEM('color',(#16520),#14153);+#17138=STYLED_ITEM('color',(#16520),#14163);+#17139=STYLED_ITEM('color',(#16520),#14173);+#17140=STYLED_ITEM('color',(#16520),#14183);+#17141=STYLED_ITEM('color',(#16520),#14191);+#17142=STYLED_ITEM('color',(#16520),#14201);+#17143=STYLED_ITEM('color',(#16520),#14211);+#17144=STYLED_ITEM('color',(#16520),#14221);+#17145=STYLED_ITEM('color',(#16520),#14231);+#17146=STYLED_ITEM('color',(#16520),#14241);+#17147=STYLED_ITEM('color',(#16520),#14251);+#17148=STYLED_ITEM('color',(#16520),#14261);+#17149=STYLED_ITEM('color',(#16520),#14269);+#17150=STYLED_ITEM('color',(#16520),#14279);+#17151=STYLED_ITEM('color',(#16520),#14289);+#17152=STYLED_ITEM('color',(#16520),#14299);+#17153=STYLED_ITEM('color',(#16520),#14309);+#17154=STYLED_ITEM('color',(#16520),#14319);+#17155=STYLED_ITEM('color',(#16520),#14329);+#17156=STYLED_ITEM('color',(#16520),#14337);+#17157=STYLED_ITEM('color',(#16520),#14348);+#17158=STYLED_ITEM('color',(#16520),#14357);+#17159=STYLED_ITEM('color',(#16520),#14367);+#17160=STYLED_ITEM('color',(#16520),#14377);+#17161=STYLED_ITEM('color',(#16520),#14387);+#17162=STYLED_ITEM('color',(#16520),#14397);+#17163=STYLED_ITEM('color',(#16520),#14406);+#17164=STYLED_ITEM('color',(#16520),#14416);+#17165=STYLED_ITEM('color',(#16520),#14426);+#17166=STYLED_ITEM('color',(#16520),#14435);+#17167=STYLED_ITEM('color',(#16520),#14445);+#17168=STYLED_ITEM('color',(#16520),#14455);+#17169=STYLED_ITEM('color',(#16520),#14465);+#17170=STYLED_ITEM('color',(#16520),#14475);+#17171=STYLED_ITEM('color',(#16520),#14483);+#17172=STYLED_ITEM('color',(#16520),#14493);+#17173=STYLED_ITEM('color',(#16520),#14503);+#17174=STYLED_ITEM('color',(#16520),#14512);+#17175=STYLED_ITEM('color',(#16520),#14522);+#17176=STYLED_ITEM('color',(#16520),#14532);+#17177=STYLED_ITEM('color',(#16520),#14542);+#17178=STYLED_ITEM('color',(#16520),#14552);+#17179=STYLED_ITEM('color',(#16520),#14560);+#17180=STYLED_ITEM('color',(#16520),#14570);+#17181=STYLED_ITEM('color',(#16520),#14580);+#17182=STYLED_ITEM('color',(#16520),#14589);+#17183=STYLED_ITEM('color',(#16520),#14599);+#17184=STYLED_ITEM('color',(#16520),#14609);+#17185=STYLED_ITEM('color',(#16520),#14619);+#17186=STYLED_ITEM('color',(#16520),#14629);+#17187=STYLED_ITEM('color',(#16520),#14637);+#17188=STYLED_ITEM('color',(#16520),#14647);+#17189=STYLED_ITEM('color',(#16520),#14657);+#17190=STYLED_ITEM('color',(#16520),#14666);+#17191=STYLED_ITEM('color',(#16520),#14676);+#17192=STYLED_ITEM('color',(#16520),#14686);+#17193=STYLED_ITEM('color',(#16520),#14696);+#17194=STYLED_ITEM('color',(#16520),#14706);+#17195=STYLED_ITEM('color',(#16520),#14714);+#17196=STYLED_ITEM('color',(#16520),#14724);+#17197=STYLED_ITEM('color',(#16520),#14734);+#17198=STYLED_ITEM('color',(#16520),#14743);+#17199=STYLED_ITEM('color',(#16520),#14753);+#17200=STYLED_ITEM('color',(#16520),#14763);+#17201=STYLED_ITEM('color',(#16520),#14773);+#17202=STYLED_ITEM('color',(#16520),#14783);+#17203=STYLED_ITEM('color',(#16520),#14791);+#17204=STYLED_ITEM('color',(#16520),#14801);+#17205=STYLED_ITEM('color',(#16520),#14811);+#17206=STYLED_ITEM('color',(#16520),#14820);+#17207=STYLED_ITEM('color',(#16520),#14830);+#17208=STYLED_ITEM('color',(#16520),#14840);+#17209=STYLED_ITEM('color',(#16520),#14850);+#17210=STYLED_ITEM('color',(#16520),#14860);+#17211=STYLED_ITEM('color',(#16520),#14868);+#17212=STYLED_ITEM('color',(#16520),#14878);+#17213=STYLED_ITEM('color',(#16520),#14888);+#17214=STYLED_ITEM('color',(#16520),#14897);+#17215=STYLED_ITEM('color',(#16520),#14907);+#17216=STYLED_ITEM('color',(#16520),#14917);+#17217=STYLED_ITEM('color',(#16520),#14927);+#17218=STYLED_ITEM('color',(#16520),#14937);+#17219=STYLED_ITEM('color',(#16520),#14945);+#17220=STYLED_ITEM('color',(#16520),#14955);+#17221=STYLED_ITEM('color',(#16520),#14965);+#17222=STYLED_ITEM('color',(#16520),#14974);+#17223=STYLED_ITEM('color',(#16520),#14984);+#17224=STYLED_ITEM('color',(#16520),#14994);+#17225=STYLED_ITEM('color',(#16520),#15004);+#17226=STYLED_ITEM('color',(#16520),#15014);+#17227=STYLED_ITEM('color',(#16520),#15022);+#17228=STYLED_ITEM('color',(#16520),#15032);+#17229=STYLED_ITEM('color',(#16520),#15042);+#17230=STYLED_ITEM('color',(#16520),#15051);+#17231=STYLED_ITEM('color',(#16520),#15061);+#17232=STYLED_ITEM('color',(#16520),#15071);+#17233=STYLED_ITEM('color',(#16520),#15081);+#17234=STYLED_ITEM('color',(#16520),#15091);+#17235=STYLED_ITEM('color',(#16520),#15099);+#17236=STYLED_ITEM('color',(#16520),#15109);+#17237=STYLED_ITEM('color',(#16520),#15119);+#17238=STYLED_ITEM('color',(#16520),#15128);+#17239=STYLED_ITEM('color',(#16520),#15138);+#17240=STYLED_ITEM('color',(#16520),#15148);+#17241=STYLED_ITEM('color',(#16520),#15158);+#17242=STYLED_ITEM('color',(#16520),#15168);+#17243=STYLED_ITEM('color',(#16520),#15176);+#17244=STYLED_ITEM('color',(#16520),#15186);+#17245=STYLED_ITEM('color',(#16520),#15196);+#17246=STYLED_ITEM('color',(#16520),#15205);+#17247=STYLED_ITEM('color',(#16520),#15215);+#17248=STYLED_ITEM('color',(#16520),#15225);+#17249=STYLED_ITEM('color',(#16520),#15235);+#17250=STYLED_ITEM('color',(#16520),#15245);+#17251=STYLED_ITEM('color',(#16520),#15253);+#17252=STYLED_ITEM('color',(#16520),#15263);+#17253=STYLED_ITEM('color',(#16520),#15273);+#17254=STYLED_ITEM('color',(#16520),#15282);+#17255=STYLED_ITEM('color',(#16520),#15292);+#17256=STYLED_ITEM('color',(#16520),#15302);+#17257=STYLED_ITEM('color',(#16520),#15312);+#17258=STYLED_ITEM('color',(#16520),#15322);+#17259=STYLED_ITEM('color',(#16520),#15330);+#17260=STYLED_ITEM('color',(#16520),#15340);+#17261=STYLED_ITEM('color',(#16520),#15350);+#17262=STYLED_ITEM('color',(#16520),#15359);+#17263=STYLED_ITEM('color',(#16520),#15369);+#17264=STYLED_ITEM('color',(#16520),#15379);+#17265=STYLED_ITEM('color',(#16520),#15389);+#17266=STYLED_ITEM('color',(#16520),#15399);+#17267=STYLED_ITEM('color',(#16520),#15407);+#17268=STYLED_ITEM('color',(#16520),#15417);+#17269=STYLED_ITEM('color',(#16520),#15427);+#17270=STYLED_ITEM('color',(#16520),#15436);+#17271=STYLED_ITEM('color',(#16520),#15446);+#17272=STYLED_ITEM('color',(#16520),#15456);+#17273=STYLED_ITEM('color',(#16520),#15466);+#17274=STYLED_ITEM('color',(#16520),#15476);+#17275=STYLED_ITEM('color',(#16520),#15484);+#17276=STYLED_ITEM('color',(#16520),#15494);+#17277=STYLED_ITEM('color',(#16520),#15504);+#17278=STYLED_ITEM('color',(#16520),#15513);+#17279=STYLED_ITEM('color',(#16520),#15523);+#17280=STYLED_ITEM('color',(#16520),#15533);+#17281=STYLED_ITEM('color',(#16520),#15543);+#17282=STYLED_ITEM('color',(#16520),#15553);+#17283=STYLED_ITEM('color',(#16520),#15561);+#17284=STYLED_ITEM('color',(#16520),#15571);+#17285=STYLED_ITEM('color',(#16520),#15581);+#17286=STYLED_ITEM('color',(#16520),#15590);+#17287=STYLED_ITEM('color',(#16520),#15600);+#17288=STYLED_ITEM('color',(#16520),#15610);+#17289=STYLED_ITEM('color',(#16520),#15620);+#17290=STYLED_ITEM('color',(#16520),#15630);+#17291=STYLED_ITEM('color',(#16520),#15638);+#17292=STYLED_ITEM('color',(#16520),#15648);+#17293=STYLED_ITEM('color',(#16520),#15658);+#17294=STYLED_ITEM('color',(#16520),#15667);+#17295=STYLED_ITEM('color',(#16520),#15677);+#17296=STYLED_ITEM('color',(#16520),#15687);+#17297=STYLED_ITEM('color',(#16520),#15697);+#17298=STYLED_ITEM('color',(#16520),#15707);+#17299=STYLED_ITEM('color',(#16520),#15715);+#17300=STYLED_ITEM('color',(#16520),#15725);+#17301=STYLED_ITEM('color',(#16520),#15735);+#17302=STYLED_ITEM('color',(#16520),#15744);+#17303=STYLED_ITEM('color',(#16520),#15754);+#17304=STYLED_ITEM('color',(#16520),#15764);+#17305=STYLED_ITEM('color',(#16520),#15774);+#17306=STYLED_ITEM('color',(#16520),#15784);+#17307=STYLED_ITEM('color',(#16520),#15792);+#17308=STYLED_ITEM('color',(#16520),#15802);+#17309=STYLED_ITEM('color',(#16520),#15812);+#17310=STYLED_ITEM('color',(#16520),#15821);+#17311=STYLED_ITEM('color',(#16520),#15831);+#17312=STYLED_ITEM('color',(#16520),#15841);+#17313=STYLED_ITEM('color',(#16520),#15851);+#17314=STYLED_ITEM('color',(#16520),#15861);+#17315=STYLED_ITEM('color',(#16520),#15869);+#17316=STYLED_ITEM('color',(#16520),#15879);+#17317=STYLED_ITEM('color',(#16520),#15889);+#17318=STYLED_ITEM('color',(#16520),#15898);+#17319=STYLED_ITEM('color',(#16520),#15908);+#17320=STYLED_ITEM('color',(#16520),#15918);+#17321=STYLED_ITEM('color',(#16520),#15928);+#17322=STYLED_ITEM('color',(#16520),#15938);+#17323=STYLED_ITEM('color',(#16520),#15946);+#17324=STYLED_ITEM('color',(#16520),#15956);+#17325=STYLED_ITEM('color',(#16520),#15966);+#17326=STYLED_ITEM('color',(#16520),#15975);+#17327=STYLED_ITEM('color',(#16520),#15985);+#17328=STYLED_ITEM('color',(#16520),#15995);+#17329=STYLED_ITEM('color',(#16520),#16005);+#17330=STYLED_ITEM('color',(#16520),#16015);+#17331=STYLED_ITEM('color',(#16520),#16023);+#17332=STYLED_ITEM('color',(#16520),#16033);+#17333=STYLED_ITEM('color',(#16520),#16043);+#17334=STYLED_ITEM('color',(#16520),#16052);+#17335=STYLED_ITEM('color',(#16520),#16062);+#17336=STYLED_ITEM('color',(#16520),#16072);+#17337=STYLED_ITEM('color',(#16520),#16082);+#17338=STYLED_ITEM('color',(#16520),#16092);+#17339=STYLED_ITEM('color',(#16520),#16100);+#17340=STYLED_ITEM('color',(#16520),#16110);+#17341=STYLED_ITEM('color',(#16520),#16120);+#17342=STYLED_ITEM('color',(#16520),#16129);+#17343=STYLED_ITEM('color',(#16520),#16139);+#17344=STYLED_ITEM('color',(#16520),#16149);+#17345=STYLED_ITEM('color',(#16520),#16159);+#17346=STYLED_ITEM('color',(#16520),#16169);+#17347=STYLED_ITEM('color',(#16520),#16177);+#17348=STYLED_ITEM('color',(#16520),#16187);+#17349=STYLED_ITEM('color',(#16520),#16197);+#17350=STYLED_ITEM('color',(#16520),#16206);+#17351=STYLED_ITEM('color',(#16520),#16216);+#17352=STYLED_ITEM('color',(#16520),#16226);+#17353=STYLED_ITEM('color',(#16520),#16236);+#17354=STYLED_ITEM('color',(#16520),#16246);+#17355=STYLED_ITEM('color',(#16520),#16254);+#17356=STYLED_ITEM('color',(#16520),#16264);+#17357=STYLED_ITEM('color',(#16520),#16274);+#17358=STYLED_ITEM('color',(#16520),#16283);+#17359=STYLED_ITEM('color',(#16520),#16293);+#17360=STYLED_ITEM('color',(#16520),#16303);+#17361=STYLED_ITEM('color',(#16520),#16313);+#17362=STYLED_ITEM('color',(#16520),#16323);+#17363=STYLED_ITEM('color',(#16520),#16331);+#17364=STYLED_ITEM('color',(#16520),#16341);+#17365=STYLED_ITEM('color',(#16520),#16351);+#17366=STYLED_ITEM('color',(#16520),#16360);+#17367=STYLED_ITEM('color',(#16520),#16370);+#17368=STYLED_ITEM('color',(#16520),#16380);+#17369=STYLED_ITEM('color',(#16520),#16390);+#17370=STYLED_ITEM('color',(#16520),#16400);+#17371=STYLED_ITEM('color',(#16520),#16408);+#17372=STYLED_ITEM('color',(#16520),#16418);+#17373=STYLED_ITEM('color',(#16520),#16428);+#17374=STYLED_ITEM('color',(#16520),#16437);+#17375=STYLED_ITEM('color',(#16520),#16447);+#17376=STYLED_ITEM('color',(#16520),#16457);+#17377=STYLED_ITEM('color',(#16520),#16467);+#17378=STYLED_ITEM('color',(#16520),#16477);+#17379=STYLED_ITEM('color',(#17380),#16485);+#17380=PRESENTATION_STYLE_ASSIGNMENT((#17381,#17387));+#17381=SURFACE_STYLE_USAGE(.BOTH.,#17382);+#17382=SURFACE_SIDE_STYLE('',(#17383));+#17383=SURFACE_STYLE_FILL_AREA(#17384);+#17384=FILL_AREA_STYLE('',(#17385));+#17385=FILL_AREA_STYLE_COLOUR('',#17386);+#17386=COLOUR_RGB('',0.690999998585,0.664000007176,0.597999987832);+#17387=CURVE_STYLE('',#16505,POSITIVE_LENGTH_MEASURE(0.1),#17386);+ENDSEC;+END-ISO-10303-21;
viewers/footprint.htmladded+1@@ -0,0 +1 @@+<!doctype html><title>sn74avc16827dggr</title>
viewers/symbol.htmladded+1@@ -0,0 +1 @@+<!doctype html><title>sn74avc16827dggr</title>