← Commit history

Initial commit: component/sn74ahct74qdrq1

Ray ·6b5b313e1d ·
2 files changed +227
README.mdadded+50
@@ -0,0 +1,50 @@+# SN74AHCT74QDRQ1++**Texas Instruments** · Flip Flops · SOIC-14++SN74AHCT74QDRQ1 from Texas Instruments, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | 1CLR | input | Clear input for flip-flop 1; active low; asynchronously resets Q to 0 and Q̄ to 1 when low. |+| 2 | 1D | input | Data input for flip-flop 1; input data transferred to outputs on positive clock edge when PRE and CLR are inactive high. |+| 3 | 1CLK | input | Clock input for flip-flop 1; positive-edge-triggered; clock triggering occurs at voltage level independent of rise time. |+| 4 | 1PRE | input | Preset input for flip-flop 1; active low; asynchronously sets Q to 1 and Q̄ to 0 when low. |+| 5 | 1Q | output | Q output for flip-flop 1; follows D input on positive clock edge; set to 1 by PRE, reset to 0 by CLR. |+| 6 | 1Q̄ | output | Inverted Q output for flip-flop 1; complement of 1Q; set to 0 by PRE, set to 1 by CLR. |+| 7 | GND | power_in | Ground; negative supply reference. |+| 8 | 2Q̄ | output | Inverted Q output for flip-flop 2; complement of 2Q; set to 0 by PRE, set to 1 by CLR. |+| 9 | 2Q | output | Q output for flip-flop 2; follows D input on positive clock edge; set to 1 by PRE, reset to 0 by CLR. |+| 10 | 2PRE | input | Preset input for flip-flop 2; active low; asynchronously sets Q to 1 and Q̄ to 0 when low. |+| 11 | 2CLK | input | Clock input for flip-flop 2; positive-edge-triggered; clock triggering occurs at voltage level independent of rise time. |+| 12 | 2D | input | Data input for flip-flop 2; input data transferred to outputs on positive clock edge when PRE and CLR are inactive high. |+| 13 | 2CLR | input | Clear input for flip-flop 2; active low; asynchronously resets Q to 0 and Q̄ to 1 when low. |+| 14 | VCC | power_in | Positive supply voltage; operating range 4.5 V to 5.5 V per recommended operating conditions. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOIC-14 |+| Category | Logic |+| Pins | 14 |++## CAD (KiCad official)++- Symbol: `SN74AHCT74QDRQ1`+- Footprint: `Package_SO:SOIC-14_3.9x8.7mm_P1.27mm`+- 3D model: SOIC-14 (KiCad packages3D, STEP)+- 3D model files: `sn74ahct74qdrq1-etched.step` / `sn74ahct74qdrq1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sn74ahct74qdrq1.step` / `sn74ahct74qdrq1.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/sn74ahct74q-q1) (16 pp, sha256 `95d94ebb340468a8`, retrieved 2026-09-24, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/sn74ahct74qdrq1-datasheet.pdf)
page.jsonadded+177
@@ -0,0 +1,177 @@+{+  "slug": "sn74ahct74qdrq1",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Flip Flops, SOIC-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "logic",+    "sn74ahct74qdrq1",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "sn74ahct74qdrq1.kicad_sym",+    "sn74ahct74qdrq1.kicad_mod",+    "sn74ahct74qdrq1.glb",+    "sn74ahct74qdrq1.step",+    "sn74ahct74qdrq1.lbr",+    "docs/hero.png",+    "docs/sn74ahct74qdrq1-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "SN74AHCT74QDRQ1",+    "manufacturer": "Texas Instruments",+    "package": "SOIC-14",+    "pin_count": 14,+    "category": "Logic",+    "subcategory": "Flip Flops",+    "datasheet": "https://www.ti.com/cn/lit/gpn/sn74ahct74q-q1",+    "parts": {+      "symbol": "sn74ahct74qdrq1.kicad_sym",+      "footprint": "sn74ahct74qdrq1.kicad_mod",+      "model_3d": "sn74ahct74qdrq1-etched.glb",+      "model_3d_plain": "sn74ahct74qdrq1.glb",+      "model_3d_step": "sn74ahct74qdrq1-etched.step",+      "model_3d_step_plain": "sn74ahct74qdrq1.step",+      "lbr": "sn74ahct74qdrq1.lbr"+    },+    "distributor_links": {+      "lcsc": "C2677721"+    },+    "pins": [+      {+        "number": "1",+        "name": "1CLR",+        "type": "input",+        "description": "Clear input for flip-flop 1; active low; asynchronously resets Q to 0 and Q̄ to 1 when low."+      },+      {+        "number": "2",+        "name": "1D",+        "type": "input",+        "description": "Data input for flip-flop 1; input data transferred to outputs on positive clock edge when PRE and CLR are inactive high."+      },+      {+        "number": "3",+        "name": "1CLK",+        "type": "input",+        "description": "Clock input for flip-flop 1; positive-edge-triggered; clock triggering occurs at voltage level independent of rise time."+      },+      {+        "number": "4",+        "name": "1PRE",+        "type": "input",+        "description": "Preset input for flip-flop 1; active low; asynchronously sets Q to 1 and Q̄ to 0 when low."+      },+      {+        "number": "5",+        "name": "1Q",+        "type": "output",+        "description": "Q output for flip-flop 1; follows D input on positive clock edge; set to 1 by PRE, reset to 0 by CLR."+      },+      {+        "number": "6",+        "name": "1Q̄",+        "type": "output",+        "description": "Inverted Q output for flip-flop 1; complement of 1Q; set to 0 by PRE, set to 1 by CLR."+      },+      {+        "number": "7",+        "name": "GND",+        "type": "power_in",+        "description": "Ground; negative supply reference."+      },+      {+        "number": "8",+        "name": "2Q̄",+        "type": "output",+        "description": "Inverted Q output for flip-flop 2; complement of 2Q; set to 0 by PRE, set to 1 by CLR."+      },+      {+        "number": "9",+        "name": "2Q",+        "type": "output",+        "description": "Q output for flip-flop 2; follows D input on positive clock edge; set to 1 by PRE, reset to 0 by CLR."+      },+      {+        "number": "10",+        "name": "2PRE",+        "type": "input",+        "description": "Preset input for flip-flop 2; active low; asynchronously sets Q to 1 and Q̄ to 0 when low."+      },+      {+        "number": "11",+        "name": "2CLK",+        "type": "input",+        "description": "Clock input for flip-flop 2; positive-edge-triggered; clock triggering occurs at voltage level independent of rise time."+      },+      {+        "number": "12",+        "name": "2D",+        "type": "input",+        "description": "Data input for flip-flop 2; input data transferred to outputs on positive clock edge when PRE and CLR are inactive high."+      },+      {+        "number": "13",+        "name": "2CLR",+        "type": "input",+        "description": "Clear input for flip-flop 2; active low; asynchronously resets Q to 0 and Q̄ to 1 when low."+      },+      {+        "number": "14",+        "name": "VCC",+        "type": "power_in",+        "description": "Positive supply voltage; operating range 4.5 V to 5.5 V per recommended operating conditions."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 16,+        "cost_usd": 0.1864,+        "at": "2026-09-24T01:12:05"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/sn74ahct74q-q1",+        "pages": 16,+        "sha256": "95d94ebb340468a8",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 14,+        "described": 14,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file