component
SN65HVD62RGTR
Public Made by Adomby adom
Texas Instruments RS-485 / RS-422 ICs, QFN-16-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+53@@ -0,0 +1,53 @@+# SN65HVD62RGTR++**Texas Instruments** · RS-485 / RS-422 ICs · QFN-16-EP(3x3)++SN65HVD62RGTR from Texas Instruments, in a QFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | SYNCOUT | tri_state | Open drain output to synchronize other devices to the 4x-carrier oscillator at XTAL1,2 (8.704 MHz for HVD62). |+| 2 | TXIN | input | Digital data bit stream to driver. |+| 3 | VL | power_in | Logic supply voltage for the device, operating range 1.6V to 5.5V. |+| 4 | RXOUT | output | Digital data bit stream from receiver. |+| 5 | DIR | output | Direction control output signal for bus arbitration. |+| 6 | DIRSET2 | input | Control bit 2 to set duration of DIR; DIRSET[2,1]: [L,L]=9.6kbps, [L,H]=38.4kbps, [H,L]=115kbps, [H,H]=Standby Mode. |+| 7 | DIRSET1 | input | Control bit 1 to set duration of DIR; DIRSET[2,1]: [L,L]=9.6kbps, [L,H]=38.4kbps, [H,L]=115kbps, [H,H]=Standby Mode. |+| 8 | GND | power_in | Ground, reference potential. |+| 9 | RES | input | Input voltage to adjust driver output power set by external resistors from BIAS pin to GND, voltage range 0.7V to 1.5V. |+| 10 | BIAS | output | Bias voltage output for setting driver output power by external resistors. |+| 11 | RXIN | input | Modulated input signal to the receiver with input signal amplitude of 1.12 Vpp at 2.176 MHz. |+| 12 | TXOUT | output | Modulated output signal from the driver at center frequency 2.176 MHz. |+| 13 | VCC | power_in | Analog supply voltage for the device, operating range 3V to 5.5V. |+| 14 | XTAL1 | input | Crystal oscillator I/O pin; connect a 4x frequency crystal between this pin and XTAL2, or connect to 8.704 MHz clock input. |+| 15 | XTAL2 | input | Crystal oscillator I/O pin; connect a 4x frequency crystal between XTAL1 and this pin, or connect to GND for clock input mode. |+| 16 | GND | power_in | Ground, reference potential. |+| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | QFN-16-EP(3x3) |+| Category | Interface |+| Pins | 17 |++## CAD (KiCad official)++- Symbol: `SN65HVD62RGTR`+- Footprint: `Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm`+- 3D model: QFN-16-EP(3x3) (KiCad packages3D, STEP)+- 3D model files: `sn65hvd62rgtr-etched.step` / `sn65hvd62rgtr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sn65hvd62rgtr.step` / `sn65hvd62rgtr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/sn65hvd62.pdf) (27 pp, sha256 `fa1a4050145cc5e6`, retrieved 2026-09-23, tier: manufacturer)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/sn65hvd62rgtr-datasheet.pdf)
page.jsonadded+199@@ -0,0 +1,199 @@+{+ "slug": "sn65hvd62rgtr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments RS-485 / RS-422 ICs, QFN-16-EP(3x3). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "interface",+ "sn65hvd62rgtr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "sn65hvd62rgtr.kicad_sym",+ "sn65hvd62rgtr.kicad_mod",+ "sn65hvd62rgtr.glb",+ "sn65hvd62rgtr.step",+ "sn65hvd62rgtr.lbr",+ "docs/hero.png",+ "docs/sn65hvd62rgtr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "SN65HVD62RGTR",+ "manufacturer": "Texas Instruments",+ "package": "QFN-16-EP(3x3)",+ "pin_count": 17,+ "category": "Interface",+ "subcategory": "RS-485 / RS-422 ICs",+ "datasheet": "https://www.ti.com/lit/ds/symlink/sn65hvd62.pdf",+ "parts": {+ "symbol": "sn65hvd62rgtr.kicad_sym",+ "footprint": "sn65hvd62rgtr.kicad_mod",+ "model_3d": "sn65hvd62rgtr-etched.glb",+ "model_3d_plain": "sn65hvd62rgtr.glb",+ "model_3d_step": "sn65hvd62rgtr-etched.step",+ "model_3d_step_plain": "sn65hvd62rgtr.step",+ "lbr": "sn65hvd62rgtr.lbr"+ },+ "distributor_links": {+ "lcsc": "C337495"+ },+ "pins": [+ {+ "number": "1",+ "name": "SYNCOUT",+ "type": "tri_state",+ "description": "Open drain output to synchronize other devices to the 4x-carrier oscillator at XTAL1,2 (8.704 MHz for HVD62)."+ },+ {+ "number": "2",+ "name": "TXIN",+ "type": "input",+ "description": "Digital data bit stream to driver."+ },+ {+ "number": "3",+ "name": "VL",+ "type": "power_in",+ "description": "Logic supply voltage for the device, operating range 1.6V to 5.5V."+ },+ {+ "number": "4",+ "name": "RXOUT",+ "type": "output",+ "description": "Digital data bit stream from receiver."+ },+ {+ "number": "5",+ "name": "DIR",+ "type": "output",+ "description": "Direction control output signal for bus arbitration."+ },+ {+ "number": "6",+ "name": "DIRSET2",+ "type": "input",+ "description": "Control bit 2 to set duration of DIR; DIRSET[2,1]: [L,L]=9.6kbps, [L,H]=38.4kbps, [H,L]=115kbps, [H,H]=Standby Mode."+ },+ {+ "number": "7",+ "name": "DIRSET1",+ "type": "input",+ "description": "Control bit 1 to set duration of DIR; DIRSET[2,1]: [L,L]=9.6kbps, [L,H]=38.4kbps, [H,L]=115kbps, [H,H]=Standby Mode."+ },+ {+ "number": "8",+ "name": "GND",+ "type": "power_in",+ "description": "Ground, reference potential."+ },+ {+ "number": "9",+ "name": "RES",+ "type": "input",+ "description": "Input voltage to adjust driver output power set by external resistors from BIAS pin to GND, voltage range 0.7V to 1.5V."+ },+ {+ "number": "10",+ "name": "BIAS",+ "type": "output",+ "description": "Bias voltage output for setting driver output power by external resistors."+ },+ {+ "number": "11",+ "name": "RXIN",+ "type": "input",+ "description": "Modulated input signal to the receiver with input signal amplitude of 1.12 Vpp at 2.176 MHz."+ },+ {+ "number": "12",+ "name": "TXOUT",+ "type": "output",+ "description": "Modulated output signal from the driver at center frequency 2.176 MHz."+ },+ {+ "number": "13",+ "name": "VCC",+ "type": "power_in",+ "description": "Analog supply voltage for the device, operating range 3V to 5.5V."+ },+ {+ "number": "14",+ "name": "XTAL1",+ "type": "input",+ "description": "Crystal oscillator I/O pin; connect a 4x frequency crystal between this pin and XTAL2, or connect to 8.704 MHz clock input."+ },+ {+ "number": "15",+ "name": "XTAL2",+ "type": "input",+ "description": "Crystal oscillator I/O pin; connect a 4x frequency crystal between XTAL1 and this pin, or connect to GND for clock input mode."+ },+ {+ "number": "16",+ "name": "GND",+ "type": "power_in",+ "description": "Ground, reference potential."+ },+ {+ "number": "17",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: XTAL1 and XTAL2 are classified as 'input' pins based on clock input mode operation and the input vol",+ "exposed pad 17 added from the footprint",+ "dropped thermal pad ['EP'] absent from footprint"+ ],+ "pages_sent": 27,+ "cost_usd": 0.2929,+ "at": "2026-09-23T18:53:18"+ },+ "datasheet": {+ "url": "https://www.ti.com/lit/ds/symlink/sn65hvd62.pdf",+ "pages": 27,+ "sha256": "fa1a4050145cc5e6",+ "source_tier": "mfr"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 17,+ "described": 17,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}